]>
Commit | Line | Data |
---|---|---|
669a5db4 JG |
1 | /* |
2 | * pata_pcmcia.c - PCMCIA PATA controller driver. | |
ab771630 | 3 | * Copyright 2005-2006 Red Hat Inc, all rights reserved. |
85cd7251 | 4 | * PCMCIA ident update Copyright 2006 Marcin Juszkiewicz |
669a5db4 JG |
5 | * <openembedded@hrw.one.pl> |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License as published by | |
9 | * the Free Software Foundation; either version 2, or (at your option) | |
10 | * any later version. | |
11 | * | |
12 | * This program is distributed in the hope that it will be useful, | |
13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | * GNU General Public License for more details. | |
16 | * | |
17 | * You should have received a copy of the GNU General Public License | |
18 | * along with this program; see the file COPYING. If not, write to | |
19 | * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. | |
20 | * | |
21 | * Heavily based upon ide-cs.c | |
22 | * The initial developer of the original code is David A. Hinds | |
23 | * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds | |
24 | * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. | |
25 | */ | |
26 | ||
27 | #include <linux/kernel.h> | |
28 | #include <linux/module.h> | |
29 | #include <linux/init.h> | |
30 | #include <linux/blkdev.h> | |
31 | #include <linux/delay.h> | |
5a0e3ad6 | 32 | #include <linux/slab.h> |
669a5db4 JG |
33 | #include <scsi/scsi_host.h> |
34 | #include <linux/ata.h> | |
35 | #include <linux/libata.h> | |
36 | ||
669a5db4 JG |
37 | #include <pcmcia/cs.h> |
38 | #include <pcmcia/cistpl.h> | |
39 | #include <pcmcia/ds.h> | |
40 | #include <pcmcia/cisreg.h> | |
41 | #include <pcmcia/ciscode.h> | |
42 | ||
43 | ||
44 | #define DRV_NAME "pata_pcmcia" | |
3d47aa8e | 45 | #define DRV_VERSION "0.3.5" |
669a5db4 | 46 | |
4dc5200d AC |
47 | /** |
48 | * pcmcia_set_mode - PCMCIA specific mode setup | |
0260731f | 49 | * @link: link |
4dc5200d AC |
50 | * @r_failed_dev: Return pointer for failed device |
51 | * | |
52 | * Perform the tuning and setup of the devices and timings, which | |
53 | * for PCMCIA is the same as any other controller. We wrap it however | |
54 | * as we need to spot hardware with incorrect or missing master/slave | |
55 | * decode, which alas is embarrassingly common in the PC world | |
56 | */ | |
57 | ||
0260731f | 58 | static int pcmcia_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) |
4dc5200d | 59 | { |
0260731f TH |
60 | struct ata_device *master = &link->device[0]; |
61 | struct ata_device *slave = &link->device[1]; | |
4dc5200d AC |
62 | |
63 | if (!ata_dev_enabled(master) || !ata_dev_enabled(slave)) | |
0260731f | 64 | return ata_do_set_mode(link, r_failed_dev); |
4dc5200d AC |
65 | |
66 | if (memcmp(master->id + ATA_ID_FW_REV, slave->id + ATA_ID_FW_REV, | |
5796d1c4 | 67 | ATA_ID_FW_REV_LEN + ATA_ID_PROD_LEN) == 0) { |
4dc5200d AC |
68 | /* Suspicious match, but could be two cards from |
69 | the same vendor - check serial */ | |
70 | if (memcmp(master->id + ATA_ID_SERNO, slave->id + ATA_ID_SERNO, | |
71 | ATA_ID_SERNO_LEN) == 0 && master->id[ATA_ID_SERNO] >> 8) { | |
72 | ata_dev_printk(slave, KERN_WARNING, "is a ghost device, ignoring.\n"); | |
73 | ata_dev_disable(slave); | |
74 | } | |
75 | } | |
0260731f | 76 | return ata_do_set_mode(link, r_failed_dev); |
4dc5200d AC |
77 | } |
78 | ||
a5df2eab AC |
79 | /** |
80 | * pcmcia_set_mode_8bit - PCMCIA specific mode setup | |
81 | * @link: link | |
82 | * @r_failed_dev: Return pointer for failed device | |
83 | * | |
84 | * For the simple emulated 8bit stuff the less we do the better. | |
85 | */ | |
86 | ||
87 | static int pcmcia_set_mode_8bit(struct ata_link *link, | |
88 | struct ata_device **r_failed_dev) | |
89 | { | |
90 | return 0; | |
91 | } | |
92 | ||
93 | /** | |
94 | * ata_data_xfer_8bit - Transfer data by 8bit PIO | |
f885521f | 95 | * @dev: device to target |
a5df2eab AC |
96 | * @buf: data buffer |
97 | * @buflen: buffer length | |
f885521f | 98 | * @rw: read/write |
a5df2eab AC |
99 | * |
100 | * Transfer data from/to the device data register by 8 bit PIO. | |
101 | * | |
102 | * LOCKING: | |
103 | * Inherited from caller. | |
104 | */ | |
105 | ||
f885521f TH |
106 | static unsigned int ata_data_xfer_8bit(struct ata_device *dev, |
107 | unsigned char *buf, unsigned int buflen, int rw) | |
a5df2eab | 108 | { |
f885521f TH |
109 | struct ata_port *ap = dev->link->ap; |
110 | ||
111 | if (rw == READ) | |
a5df2eab | 112 | ioread8_rep(ap->ioaddr.data_addr, buf, buflen); |
f885521f TH |
113 | else |
114 | iowrite8_rep(ap->ioaddr.data_addr, buf, buflen); | |
115 | ||
116 | return buflen; | |
a5df2eab AC |
117 | } |
118 | ||
3d47aa8e AC |
119 | /** |
120 | * pcmcia_8bit_drain_fifo - Stock FIFO drain logic for SFF controllers | |
121 | * @qc: command | |
122 | * | |
123 | * Drain the FIFO and device of any stuck data following a command | |
3ad2f3fb | 124 | * failing to complete. In some cases this is necessary before a |
3d47aa8e AC |
125 | * reset will recover the device. |
126 | * | |
127 | */ | |
128 | ||
9ffc5da5 | 129 | static void pcmcia_8bit_drain_fifo(struct ata_queued_cmd *qc) |
3d47aa8e AC |
130 | { |
131 | int count; | |
132 | struct ata_port *ap; | |
133 | ||
134 | /* We only need to flush incoming data when a command was running */ | |
135 | if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE) | |
136 | return; | |
137 | ||
138 | ap = qc->ap; | |
139 | ||
140 | /* Drain up to 64K of data before we give up this recovery method */ | |
141 | for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ) | |
142 | && count++ < 65536;) | |
143 | ioread8(ap->ioaddr.data_addr); | |
144 | ||
145 | if (count) | |
146 | ata_port_printk(ap, KERN_WARNING, "drained %d bytes to clear DRQ.\n", | |
147 | count); | |
148 | ||
149 | } | |
a5df2eab | 150 | |
669a5db4 | 151 | static struct scsi_host_template pcmcia_sht = { |
68d1d07b | 152 | ATA_PIO_SHT(DRV_NAME), |
669a5db4 JG |
153 | }; |
154 | ||
155 | static struct ata_port_operations pcmcia_port_ops = { | |
029cfd6b | 156 | .inherits = &ata_sff_port_ops, |
5682ed33 | 157 | .sff_data_xfer = ata_sff_data_xfer_noirq, |
029cfd6b TH |
158 | .cable_detect = ata_cable_40wire, |
159 | .set_mode = pcmcia_set_mode, | |
669a5db4 JG |
160 | }; |
161 | ||
a5df2eab | 162 | static struct ata_port_operations pcmcia_8bit_port_ops = { |
029cfd6b | 163 | .inherits = &ata_sff_port_ops, |
5682ed33 | 164 | .sff_data_xfer = ata_data_xfer_8bit, |
029cfd6b TH |
165 | .cable_detect = ata_cable_40wire, |
166 | .set_mode = pcmcia_set_mode_8bit, | |
8244cd05 | 167 | .sff_drain_fifo = pcmcia_8bit_drain_fifo, |
a5df2eab AC |
168 | }; |
169 | ||
0bac660a DB |
170 | |
171 | struct pcmcia_config_check { | |
0bac660a DB |
172 | unsigned long ctl_base; |
173 | int skip_vcc; | |
174 | int is_kme; | |
175 | }; | |
176 | ||
177 | static int pcmcia_check_one_config(struct pcmcia_device *pdev, | |
178 | cistpl_cftable_entry_t *cfg, | |
8e2fc39d | 179 | cistpl_cftable_entry_t *dflt, |
ad913c11 | 180 | unsigned int vcc, |
0bac660a DB |
181 | void *priv_data) |
182 | { | |
183 | struct pcmcia_config_check *stk = priv_data; | |
184 | ||
185 | /* Check for matching Vcc, unless we're desperate */ | |
186 | if (!stk->skip_vcc) { | |
187 | if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { | |
ad913c11 | 188 | if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) |
8e2fc39d DB |
189 | return -ENODEV; |
190 | } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { | |
ad913c11 | 191 | if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) |
8e2fc39d | 192 | return -ENODEV; |
0bac660a DB |
193 | } |
194 | } | |
195 | ||
196 | if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) | |
e8405f0f | 197 | pdev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; |
8e2fc39d | 198 | else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) |
e8405f0f | 199 | pdev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; |
0bac660a | 200 | |
8e2fc39d DB |
201 | if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { |
202 | cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; | |
90abdc3b DB |
203 | pdev->io_lines = io->flags & CISTPL_IO_LINES_MASK; |
204 | pdev->resource[0]->start = io->win[0].base; | |
205 | if (!(io->flags & CISTPL_IO_16BIT)) { | |
206 | pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; | |
207 | pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; | |
208 | } | |
0bac660a | 209 | if (io->nwin == 2) { |
90abdc3b DB |
210 | pdev->resource[0]->end = 8; |
211 | pdev->resource[1]->start = io->win[1].base; | |
212 | pdev->resource[1]->end = (stk->is_kme) ? 2 : 1; | |
213 | if (pcmcia_request_io(pdev) != 0) | |
8e2fc39d | 214 | return -ENODEV; |
9a017a91 | 215 | stk->ctl_base = pdev->resource[1]->start; |
0bac660a | 216 | } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { |
90abdc3b DB |
217 | pdev->resource[0]->end = io->win[0].len; |
218 | pdev->resource[1]->end = 0; | |
219 | if (pcmcia_request_io(pdev) != 0) | |
8e2fc39d | 220 | return -ENODEV; |
9a017a91 | 221 | stk->ctl_base = pdev->resource[0]->start + 0x0e; |
0bac660a | 222 | } else |
8e2fc39d | 223 | return -ENODEV; |
0bac660a DB |
224 | /* If we've got this far, we're done */ |
225 | return 0; | |
226 | } | |
0bac660a DB |
227 | return -ENODEV; |
228 | } | |
229 | ||
669a5db4 JG |
230 | /** |
231 | * pcmcia_init_one - attach a PCMCIA interface | |
232 | * @pdev: pcmcia device | |
233 | * | |
234 | * Register a PCMCIA IDE interface. Such interfaces are PIO 0 and | |
235 | * shared IRQ. | |
236 | */ | |
237 | ||
238 | static int pcmcia_init_one(struct pcmcia_device *pdev) | |
239 | { | |
5d728824 TH |
240 | struct ata_host *host; |
241 | struct ata_port *ap; | |
0bac660a | 242 | struct pcmcia_config_check *stk = NULL; |
444486a5 | 243 | int is_kme = 0, ret = -ENOMEM, p; |
669a5db4 | 244 | unsigned long io_base, ctl_base; |
0d5ff566 | 245 | void __iomem *io_addr, *ctl_addr; |
d7b17450 | 246 | int n_ports = 1; |
a5df2eab AC |
247 | struct ata_port_operations *ops = &pcmcia_port_ops; |
248 | ||
669a5db4 | 249 | /* Set up attributes in order to probe card and get resources */ |
90abdc3b DB |
250 | pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; |
251 | pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; | |
669a5db4 | 252 | pdev->conf.Attributes = CONF_ENABLE_IRQ; |
669a5db4 | 253 | |
669a5db4 JG |
254 | /* See if we have a manufacturer identifier. Use it to set is_kme for |
255 | vendor quirks */ | |
efd50585 DB |
256 | is_kme = ((pdev->manf_id == MANFID_KME) && |
257 | ((pdev->card_id == PRODID_KME_KXLC005_A) || | |
258 | (pdev->card_id == PRODID_KME_KXLC005_B))); | |
669a5db4 | 259 | |
0bac660a | 260 | /* Allocate resoure probing structures */ |
669a5db4 | 261 | |
0bac660a DB |
262 | stk = kzalloc(sizeof(*stk), GFP_KERNEL); |
263 | if (!stk) | |
264 | goto out1; | |
265 | stk->is_kme = is_kme; | |
0bac660a | 266 | stk->skip_vcc = io_base = ctl_base = 0; |
669a5db4 | 267 | |
0bac660a | 268 | if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk)) { |
0bac660a DB |
269 | stk->skip_vcc = 1; |
270 | if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk)) | |
271 | goto failed; /* No suitable config found */ | |
669a5db4 | 272 | } |
9a017a91 | 273 | io_base = pdev->resource[0]->start; |
0bac660a | 274 | ctl_base = stk->ctl_base; |
eb14120f | 275 | if (!pdev->irq) |
444486a5 DB |
276 | goto failed; |
277 | ||
278 | ret = pcmcia_request_configuration(pdev, &pdev->conf); | |
279 | if (ret) | |
280 | goto failed; | |
669a5db4 | 281 | |
0d5ff566 TH |
282 | /* iomap */ |
283 | ret = -ENOMEM; | |
284 | io_addr = devm_ioport_map(&pdev->dev, io_base, 8); | |
285 | ctl_addr = devm_ioport_map(&pdev->dev, ctl_base, 1); | |
286 | if (!io_addr || !ctl_addr) | |
287 | goto failed; | |
288 | ||
669a5db4 | 289 | /* Success. Disable the IRQ nIEN line, do quirks */ |
0d5ff566 | 290 | iowrite8(0x02, ctl_addr); |
669a5db4 | 291 | if (is_kme) |
0d5ff566 | 292 | iowrite8(0x81, ctl_addr + 0x01); |
669a5db4 JG |
293 | |
294 | /* FIXME: Could be more ports at base + 0x10 but we only deal with | |
295 | one right now */ | |
9a017a91 | 296 | if (resource_size(pdev->resource[0]) >= 0x20) |
d7b17450 | 297 | n_ports = 2; |
669a5db4 | 298 | |
a5df2eab AC |
299 | if (pdev->manf_id == 0x0097 && pdev->card_id == 0x1620) |
300 | ops = &pcmcia_8bit_port_ops; | |
669a5db4 | 301 | /* |
5796d1c4 JG |
302 | * Having done the PCMCIA plumbing the ATA side is relatively |
303 | * sane. | |
669a5db4 | 304 | */ |
5d728824 | 305 | ret = -ENOMEM; |
d7b17450 | 306 | host = ata_host_alloc(&pdev->dev, n_ports); |
5d728824 TH |
307 | if (!host) |
308 | goto failed; | |
5d728824 | 309 | |
d7b17450 AC |
310 | for (p = 0; p < n_ports; p++) { |
311 | ap = host->ports[p]; | |
5d728824 | 312 | |
d7b17450 | 313 | ap->ops = ops; |
14bdef98 | 314 | ap->pio_mask = ATA_PIO0; /* ISA so PIO 0 cycles */ |
d7b17450 AC |
315 | ap->flags |= ATA_FLAG_SLAVE_POSS; |
316 | ap->ioaddr.cmd_addr = io_addr + 0x10 * p; | |
317 | ap->ioaddr.altstatus_addr = ctl_addr + 0x10 * p; | |
318 | ap->ioaddr.ctl_addr = ctl_addr + 0x10 * p; | |
9363c382 | 319 | ata_sff_std_ports(&ap->ioaddr); |
d7b17450 AC |
320 | |
321 | ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base); | |
322 | } | |
cbcdd875 | 323 | |
5d728824 | 324 | /* activate */ |
eb14120f | 325 | ret = ata_host_activate(host, pdev->irq, ata_sff_interrupt, |
5d728824 TH |
326 | IRQF_SHARED, &pcmcia_sht); |
327 | if (ret) | |
669a5db4 JG |
328 | goto failed; |
329 | ||
a371b37c | 330 | pdev->priv = host; |
669a5db4 JG |
331 | kfree(stk); |
332 | return 0; | |
333 | ||
669a5db4 JG |
334 | failed: |
335 | kfree(stk); | |
669a5db4 JG |
336 | pcmcia_disable_device(pdev); |
337 | out1: | |
669a5db4 JG |
338 | return ret; |
339 | } | |
340 | ||
341 | /** | |
342 | * pcmcia_remove_one - unplug an pcmcia interface | |
343 | * @pdev: pcmcia device | |
344 | * | |
345 | * A PCMCIA ATA device has been unplugged. Perform the needed | |
346 | * cleanup. Also called on module unload for any active devices. | |
347 | */ | |
348 | ||
349 | static void pcmcia_remove_one(struct pcmcia_device *pdev) | |
350 | { | |
a371b37c DB |
351 | struct ata_host *host = pdev->priv; |
352 | ||
353 | if (host) | |
354 | ata_host_detach(host); | |
355 | ||
669a5db4 | 356 | pcmcia_disable_device(pdev); |
669a5db4 JG |
357 | } |
358 | ||
359 | static struct pcmcia_device_id pcmcia_devices[] = { | |
360 | PCMCIA_DEVICE_FUNC_ID(4), | |
77ec15cc | 361 | PCMCIA_DEVICE_MANF_CARD(0x0000, 0x0000), /* Corsair */ |
669a5db4 | 362 | PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000), /* Hitachi */ |
ed2a6e4a MD |
363 | PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000), /* I-O Data CFA */ |
364 | PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */ | |
669a5db4 | 365 | PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704), |
7871e74a | 366 | PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904), |
ed2a6e4a | 367 | PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */ |
795659ef | 368 | PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */ |
a5df2eab | 369 | PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), /* TI emulated */ |
669a5db4 JG |
370 | PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */ |
371 | PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d), | |
372 | PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */ | |
5796d1c4 | 373 | PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000), /* Hitachi */ |
669a5db4 | 374 | PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001), |
ed2a6e4a MD |
375 | PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0100), /* Viking CFA */ |
376 | PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200), /* Lexar, Viking CFA */ | |
669a5db4 JG |
377 | PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0), |
378 | PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74), | |
379 | PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9), | |
380 | PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591), | |
381 | PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728), | |
044dcc82 | 382 | PCMCIA_DEVICE_PROD_ID12("CNF ", "CD-ROM", 0x46d7db81, 0x66536591), |
669a5db4 JG |
383 | PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591), |
384 | PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4), | |
385 | PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde), | |
386 | PCMCIA_DEVICE_PROD_ID12("EXP", "CD+GAME", 0x6f58c983, 0x63c13aaf), | |
387 | PCMCIA_DEVICE_PROD_ID12("EXP ", "CD-ROM", 0x0a5c52fd, 0x66536591), | |
388 | PCMCIA_DEVICE_PROD_ID12("EXP ", "PnPIDE", 0x0a5c52fd, 0x0c694728), | |
389 | PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e), | |
390 | PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae), | |
391 | PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178), | |
795659ef | 392 | PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420), |
669a5db4 JG |
393 | PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178), |
394 | PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753), | |
85ea2d3f | 395 | PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x55d5bffb), |
f25798ed | 396 | PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 4GB", 0x2e6d1829, 0x531e7d10), |
363f7e42 | 397 | PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e), |
669a5db4 JG |
398 | PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b), |
399 | PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149), | |
400 | PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674), | |
401 | PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b), | |
74e23386 | 402 | PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee), |
669a5db4 JG |
403 | PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c), |
404 | PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79), | |
405 | PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591), | |
406 | PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728), | |
407 | PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1), | |
408 | PCMCIA_DEVICE_PROD_ID12("SEAGATE", "ST1", 0x87c1b330, 0xe1f30883), | |
409 | PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "04/05/06", 0x43d74cb4, 0x6a22777d), | |
410 | PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6), | |
411 | PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003), | |
a0a00cbf | 412 | PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443), |
a17bf220 | 413 | PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32), |
bf4e1829 | 414 | PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1), |
48aaae7a | 415 | PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2), |
a0a00cbf | 416 | PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8), |
85ea2d3f | 417 | PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x7558f133), |
f25798ed | 418 | PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS8GCF133", 0x709b1bf1, 0xb2f89b47), |
669a5db4 | 419 | PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852), |
0517793f | 420 | PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918), |
669a5db4 JG |
421 | PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209), |
422 | PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e), | |
423 | PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6), | |
a12d6c9a | 424 | PCMCIA_DEVICE_PROD_ID2("Flash Card", 0x5a362506), |
669a5db4 JG |
425 | PCMCIA_DEVICE_NULL, |
426 | }; | |
427 | ||
428 | MODULE_DEVICE_TABLE(pcmcia, pcmcia_devices); | |
429 | ||
430 | static struct pcmcia_driver pcmcia_driver = { | |
431 | .owner = THIS_MODULE, | |
432 | .drv = { | |
433 | .name = DRV_NAME, | |
434 | }, | |
435 | .id_table = pcmcia_devices, | |
436 | .probe = pcmcia_init_one, | |
437 | .remove = pcmcia_remove_one, | |
438 | }; | |
439 | ||
440 | static int __init pcmcia_init(void) | |
441 | { | |
442 | return pcmcia_register_driver(&pcmcia_driver); | |
443 | } | |
444 | ||
445 | static void __exit pcmcia_exit(void) | |
446 | { | |
447 | pcmcia_unregister_driver(&pcmcia_driver); | |
448 | } | |
449 | ||
450 | MODULE_AUTHOR("Alan Cox"); | |
451 | MODULE_DESCRIPTION("low-level driver for PCMCIA ATA"); | |
452 | MODULE_LICENSE("GPL"); | |
453 | MODULE_VERSION(DRV_VERSION); | |
454 | ||
455 | module_init(pcmcia_init); | |
456 | module_exit(pcmcia_exit); |