]>
Commit | Line | Data |
---|---|---|
a619f981 AI |
1 | /* |
2 | * Support for IDE interfaces on Celleb platform | |
3 | * | |
4 | * (C) Copyright 2006 TOSHIBA CORPORATION | |
5 | * | |
6 | * This code is based on drivers/ata/ata_piix.c: | |
7 | * Copyright 2003-2005 Red Hat Inc | |
8 | * Copyright 2003-2005 Jeff Garzik | |
9 | * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer | |
10 | * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> | |
11 | * Copyright (C) 2003 Red Hat Inc <alan@redhat.com> | |
12 | * | |
13 | * and drivers/ata/ahci.c: | |
14 | * Copyright 2004-2005 Red Hat, Inc. | |
15 | * | |
16 | * and drivers/ata/libata-core.c: | |
17 | * Copyright 2003-2004 Red Hat, Inc. All rights reserved. | |
18 | * Copyright 2003-2004 Jeff Garzik | |
19 | * | |
20 | * This program is free software; you can redistribute it and/or modify | |
21 | * it under the terms of the GNU General Public License as published by | |
22 | * the Free Software Foundation; either version 2 of the License, or | |
23 | * (at your option) any later version. | |
24 | * | |
25 | * This program is distributed in the hope that it will be useful, | |
26 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
27 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
28 | * GNU General Public License for more details. | |
29 | * | |
30 | * You should have received a copy of the GNU General Public License along | |
31 | * with this program; if not, write to the Free Software Foundation, Inc., | |
32 | * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. | |
33 | */ | |
34 | ||
35 | #include <linux/kernel.h> | |
36 | #include <linux/module.h> | |
37 | #include <linux/pci.h> | |
38 | #include <linux/init.h> | |
39 | #include <linux/blkdev.h> | |
40 | #include <linux/delay.h> | |
41 | #include <linux/device.h> | |
42 | #include <scsi/scsi_host.h> | |
43 | #include <linux/libata.h> | |
44 | ||
45 | #define DRV_NAME "pata_scc" | |
2a3103ce | 46 | #define DRV_VERSION "0.3" |
a619f981 AI |
47 | |
48 | #define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4 | |
49 | ||
50 | /* PCI BARs */ | |
51 | #define SCC_CTRL_BAR 0 | |
52 | #define SCC_BMID_BAR 1 | |
53 | ||
54 | /* offset of CTRL registers */ | |
55 | #define SCC_CTL_PIOSHT 0x000 | |
56 | #define SCC_CTL_PIOCT 0x004 | |
57 | #define SCC_CTL_MDMACT 0x008 | |
58 | #define SCC_CTL_MCRCST 0x00C | |
59 | #define SCC_CTL_SDMACT 0x010 | |
60 | #define SCC_CTL_SCRCST 0x014 | |
61 | #define SCC_CTL_UDENVT 0x018 | |
62 | #define SCC_CTL_TDVHSEL 0x020 | |
63 | #define SCC_CTL_MODEREG 0x024 | |
64 | #define SCC_CTL_ECMODE 0xF00 | |
65 | #define SCC_CTL_MAEA0 0xF50 | |
66 | #define SCC_CTL_MAEC0 0xF54 | |
67 | #define SCC_CTL_CCKCTRL 0xFF0 | |
68 | ||
69 | /* offset of BMID registers */ | |
70 | #define SCC_DMA_CMD 0x000 | |
71 | #define SCC_DMA_STATUS 0x004 | |
72 | #define SCC_DMA_TABLE_OFS 0x008 | |
73 | #define SCC_DMA_INTMASK 0x010 | |
74 | #define SCC_DMA_INTST 0x014 | |
75 | #define SCC_DMA_PTERADD 0x018 | |
76 | #define SCC_REG_CMD_ADDR 0x020 | |
77 | #define SCC_REG_DATA 0x000 | |
78 | #define SCC_REG_ERR 0x004 | |
79 | #define SCC_REG_FEATURE 0x004 | |
80 | #define SCC_REG_NSECT 0x008 | |
81 | #define SCC_REG_LBAL 0x00C | |
82 | #define SCC_REG_LBAM 0x010 | |
83 | #define SCC_REG_LBAH 0x014 | |
84 | #define SCC_REG_DEVICE 0x018 | |
85 | #define SCC_REG_STATUS 0x01C | |
86 | #define SCC_REG_CMD 0x01C | |
87 | #define SCC_REG_ALTSTATUS 0x020 | |
88 | ||
89 | /* register value */ | |
90 | #define TDVHSEL_MASTER 0x00000001 | |
91 | #define TDVHSEL_SLAVE 0x00000004 | |
92 | ||
93 | #define MODE_JCUSFEN 0x00000080 | |
94 | ||
95 | #define ECMODE_VALUE 0x01 | |
96 | ||
97 | #define CCKCTRL_ATARESET 0x00040000 | |
98 | #define CCKCTRL_BUFCNT 0x00020000 | |
99 | #define CCKCTRL_CRST 0x00010000 | |
100 | #define CCKCTRL_OCLKEN 0x00000100 | |
101 | #define CCKCTRL_ATACLKOEN 0x00000002 | |
102 | #define CCKCTRL_LCLKEN 0x00000001 | |
103 | ||
104 | #define QCHCD_IOS_SS 0x00000001 | |
105 | ||
106 | #define QCHSD_STPDIAG 0x00020000 | |
107 | ||
108 | #define INTMASK_MSK 0xD1000012 | |
109 | #define INTSTS_SERROR 0x80000000 | |
110 | #define INTSTS_PRERR 0x40000000 | |
111 | #define INTSTS_RERR 0x10000000 | |
112 | #define INTSTS_ICERR 0x01000000 | |
113 | #define INTSTS_BMSINT 0x00000010 | |
114 | #define INTSTS_BMHE 0x00000008 | |
115 | #define INTSTS_IOIRQS 0x00000004 | |
116 | #define INTSTS_INTRQ 0x00000002 | |
117 | #define INTSTS_ACTEINT 0x00000001 | |
118 | ||
119 | ||
120 | /* PIO transfer mode table */ | |
121 | /* JCHST */ | |
122 | static const unsigned long JCHSTtbl[2][7] = { | |
123 | {0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */ | |
124 | {0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */ | |
125 | }; | |
126 | ||
127 | /* JCHHT */ | |
128 | static const unsigned long JCHHTtbl[2][7] = { | |
129 | {0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */ | |
130 | {0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */ | |
131 | }; | |
132 | ||
133 | /* JCHCT */ | |
134 | static const unsigned long JCHCTtbl[2][7] = { | |
135 | {0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */ | |
136 | {0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */ | |
137 | }; | |
138 | ||
139 | /* DMA transfer mode table */ | |
140 | /* JCHDCTM/JCHDCTS */ | |
141 | static const unsigned long JCHDCTxtbl[2][7] = { | |
142 | {0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */ | |
143 | {0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */ | |
144 | }; | |
145 | ||
146 | /* JCSTWTM/JCSTWTS */ | |
147 | static const unsigned long JCSTWTxtbl[2][7] = { | |
148 | {0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */ | |
149 | {0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */ | |
150 | }; | |
151 | ||
152 | /* JCTSS */ | |
153 | static const unsigned long JCTSStbl[2][7] = { | |
154 | {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */ | |
155 | {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */ | |
156 | }; | |
157 | ||
158 | /* JCENVT */ | |
159 | static const unsigned long JCENVTtbl[2][7] = { | |
160 | {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */ | |
161 | {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */ | |
162 | }; | |
163 | ||
164 | /* JCACTSELS/JCACTSELM */ | |
165 | static const unsigned long JCACTSELtbl[2][7] = { | |
166 | {0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */ | |
167 | {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */ | |
168 | }; | |
169 | ||
170 | static const struct pci_device_id scc_pci_tbl[] = { | |
171 | {PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA, | |
172 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, | |
173 | { } /* terminate list */ | |
174 | }; | |
175 | ||
176 | /** | |
177 | * scc_set_piomode - Initialize host controller PATA PIO timings | |
178 | * @ap: Port whose timings we are configuring | |
179 | * @adev: um | |
180 | * | |
181 | * Set PIO mode for device. | |
182 | * | |
183 | * LOCKING: | |
184 | * None (inherited from caller). | |
185 | */ | |
186 | ||
187 | static void scc_set_piomode (struct ata_port *ap, struct ata_device *adev) | |
188 | { | |
189 | unsigned int pio = adev->pio_mode - XFER_PIO_0; | |
190 | void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR]; | |
191 | void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL; | |
192 | void __iomem *piosht_port = ctrl_base + SCC_CTL_PIOSHT; | |
193 | void __iomem *pioct_port = ctrl_base + SCC_CTL_PIOCT; | |
194 | unsigned long reg; | |
195 | int offset; | |
196 | ||
197 | reg = in_be32(cckctrl_port); | |
198 | if (reg & CCKCTRL_ATACLKOEN) | |
199 | offset = 1; /* 133MHz */ | |
200 | else | |
201 | offset = 0; /* 100MHz */ | |
202 | ||
203 | reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio]; | |
204 | out_be32(piosht_port, reg); | |
205 | reg = JCHCTtbl[offset][pio]; | |
206 | out_be32(pioct_port, reg); | |
207 | } | |
208 | ||
209 | /** | |
210 | * scc_set_dmamode - Initialize host controller PATA DMA timings | |
211 | * @ap: Port whose timings we are configuring | |
212 | * @adev: um | |
213 | * @udma: udma mode, 0 - 6 | |
214 | * | |
215 | * Set UDMA mode for device. | |
216 | * | |
217 | * LOCKING: | |
218 | * None (inherited from caller). | |
219 | */ | |
220 | ||
221 | static void scc_set_dmamode (struct ata_port *ap, struct ata_device *adev) | |
222 | { | |
223 | unsigned int udma = adev->dma_mode; | |
224 | unsigned int is_slave = (adev->devno != 0); | |
225 | u8 speed = udma; | |
226 | void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR]; | |
227 | void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL; | |
228 | void __iomem *mdmact_port = ctrl_base + SCC_CTL_MDMACT; | |
229 | void __iomem *mcrcst_port = ctrl_base + SCC_CTL_MCRCST; | |
230 | void __iomem *sdmact_port = ctrl_base + SCC_CTL_SDMACT; | |
231 | void __iomem *scrcst_port = ctrl_base + SCC_CTL_SCRCST; | |
232 | void __iomem *udenvt_port = ctrl_base + SCC_CTL_UDENVT; | |
233 | void __iomem *tdvhsel_port = ctrl_base + SCC_CTL_TDVHSEL; | |
234 | int offset, idx; | |
235 | ||
a84471fe | 236 | if (in_be32(cckctrl_port) & CCKCTRL_ATACLKOEN) |
a619f981 AI |
237 | offset = 1; /* 133MHz */ |
238 | else | |
239 | offset = 0; /* 100MHz */ | |
240 | ||
241 | if (speed >= XFER_UDMA_0) | |
242 | idx = speed - XFER_UDMA_0; | |
243 | else | |
244 | return; | |
245 | ||
246 | if (is_slave) { | |
247 | out_be32(sdmact_port, JCHDCTxtbl[offset][idx]); | |
248 | out_be32(scrcst_port, JCSTWTxtbl[offset][idx]); | |
249 | out_be32(tdvhsel_port, | |
250 | (in_be32(tdvhsel_port) & ~TDVHSEL_SLAVE) | (JCACTSELtbl[offset][idx] << 2)); | |
251 | } else { | |
252 | out_be32(mdmact_port, JCHDCTxtbl[offset][idx]); | |
253 | out_be32(mcrcst_port, JCSTWTxtbl[offset][idx]); | |
254 | out_be32(tdvhsel_port, | |
255 | (in_be32(tdvhsel_port) & ~TDVHSEL_MASTER) | JCACTSELtbl[offset][idx]); | |
256 | } | |
257 | out_be32(udenvt_port, | |
258 | JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx]); | |
259 | } | |
260 | ||
dcd03447 AI |
261 | unsigned long scc_mode_filter(struct ata_device *adev, unsigned long mask) |
262 | { | |
263 | /* errata A308 workaround: limit ATAPI UDMA mode to UDMA4 */ | |
264 | if (adev->class == ATA_DEV_ATAPI && | |
265 | (mask & (0xE0 << ATA_SHIFT_UDMA))) { | |
266 | printk(KERN_INFO "%s: limit ATAPI UDMA to UDMA4\n", DRV_NAME); | |
267 | mask &= ~(0xE0 << ATA_SHIFT_UDMA); | |
268 | } | |
9363c382 | 269 | return ata_bmdma_mode_filter(adev, mask); |
dcd03447 AI |
270 | } |
271 | ||
a619f981 AI |
272 | /** |
273 | * scc_tf_load - send taskfile registers to host controller | |
274 | * @ap: Port to which output is sent | |
275 | * @tf: ATA taskfile register set | |
276 | * | |
9363c382 | 277 | * Note: Original code is ata_sff_tf_load(). |
a619f981 AI |
278 | */ |
279 | ||
280 | static void scc_tf_load (struct ata_port *ap, const struct ata_taskfile *tf) | |
281 | { | |
282 | struct ata_ioports *ioaddr = &ap->ioaddr; | |
283 | unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; | |
284 | ||
285 | if (tf->ctl != ap->last_ctl) { | |
286 | out_be32(ioaddr->ctl_addr, tf->ctl); | |
287 | ap->last_ctl = tf->ctl; | |
288 | ata_wait_idle(ap); | |
289 | } | |
290 | ||
291 | if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { | |
292 | out_be32(ioaddr->feature_addr, tf->hob_feature); | |
293 | out_be32(ioaddr->nsect_addr, tf->hob_nsect); | |
294 | out_be32(ioaddr->lbal_addr, tf->hob_lbal); | |
295 | out_be32(ioaddr->lbam_addr, tf->hob_lbam); | |
296 | out_be32(ioaddr->lbah_addr, tf->hob_lbah); | |
297 | VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", | |
298 | tf->hob_feature, | |
299 | tf->hob_nsect, | |
300 | tf->hob_lbal, | |
301 | tf->hob_lbam, | |
302 | tf->hob_lbah); | |
303 | } | |
304 | ||
305 | if (is_addr) { | |
306 | out_be32(ioaddr->feature_addr, tf->feature); | |
307 | out_be32(ioaddr->nsect_addr, tf->nsect); | |
308 | out_be32(ioaddr->lbal_addr, tf->lbal); | |
309 | out_be32(ioaddr->lbam_addr, tf->lbam); | |
310 | out_be32(ioaddr->lbah_addr, tf->lbah); | |
311 | VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", | |
312 | tf->feature, | |
313 | tf->nsect, | |
314 | tf->lbal, | |
315 | tf->lbam, | |
316 | tf->lbah); | |
317 | } | |
318 | ||
319 | if (tf->flags & ATA_TFLAG_DEVICE) { | |
320 | out_be32(ioaddr->device_addr, tf->device); | |
321 | VPRINTK("device 0x%X\n", tf->device); | |
322 | } | |
323 | ||
324 | ata_wait_idle(ap); | |
325 | } | |
326 | ||
327 | /** | |
328 | * scc_check_status - Read device status reg & clear interrupt | |
329 | * @ap: port where the device is | |
330 | * | |
331 | * Note: Original code is ata_check_status(). | |
332 | */ | |
333 | ||
334 | static u8 scc_check_status (struct ata_port *ap) | |
335 | { | |
336 | return in_be32(ap->ioaddr.status_addr); | |
337 | } | |
338 | ||
339 | /** | |
340 | * scc_tf_read - input device's ATA taskfile shadow registers | |
341 | * @ap: Port from which input is read | |
342 | * @tf: ATA taskfile register set for storing input | |
343 | * | |
9363c382 | 344 | * Note: Original code is ata_sff_tf_read(). |
a619f981 AI |
345 | */ |
346 | ||
347 | static void scc_tf_read (struct ata_port *ap, struct ata_taskfile *tf) | |
348 | { | |
349 | struct ata_ioports *ioaddr = &ap->ioaddr; | |
350 | ||
351 | tf->command = scc_check_status(ap); | |
352 | tf->feature = in_be32(ioaddr->error_addr); | |
353 | tf->nsect = in_be32(ioaddr->nsect_addr); | |
354 | tf->lbal = in_be32(ioaddr->lbal_addr); | |
355 | tf->lbam = in_be32(ioaddr->lbam_addr); | |
356 | tf->lbah = in_be32(ioaddr->lbah_addr); | |
357 | tf->device = in_be32(ioaddr->device_addr); | |
358 | ||
359 | if (tf->flags & ATA_TFLAG_LBA48) { | |
360 | out_be32(ioaddr->ctl_addr, tf->ctl | ATA_HOB); | |
361 | tf->hob_feature = in_be32(ioaddr->error_addr); | |
362 | tf->hob_nsect = in_be32(ioaddr->nsect_addr); | |
363 | tf->hob_lbal = in_be32(ioaddr->lbal_addr); | |
364 | tf->hob_lbam = in_be32(ioaddr->lbam_addr); | |
365 | tf->hob_lbah = in_be32(ioaddr->lbah_addr); | |
fe36cb53 PV |
366 | out_be32(ioaddr->ctl_addr, tf->ctl); |
367 | ap->last_ctl = tf->ctl; | |
a619f981 AI |
368 | } |
369 | } | |
370 | ||
371 | /** | |
372 | * scc_exec_command - issue ATA command to host controller | |
373 | * @ap: port to which command is being issued | |
374 | * @tf: ATA taskfile register set | |
375 | * | |
9363c382 | 376 | * Note: Original code is ata_sff_exec_command(). |
a619f981 AI |
377 | */ |
378 | ||
379 | static void scc_exec_command (struct ata_port *ap, | |
380 | const struct ata_taskfile *tf) | |
381 | { | |
878d4fed | 382 | DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command); |
a619f981 AI |
383 | |
384 | out_be32(ap->ioaddr.command_addr, tf->command); | |
9363c382 | 385 | ata_sff_pause(ap); |
a619f981 AI |
386 | } |
387 | ||
388 | /** | |
389 | * scc_check_altstatus - Read device alternate status reg | |
390 | * @ap: port where the device is | |
391 | */ | |
392 | ||
393 | static u8 scc_check_altstatus (struct ata_port *ap) | |
394 | { | |
395 | return in_be32(ap->ioaddr.altstatus_addr); | |
396 | } | |
397 | ||
398 | /** | |
9363c382 | 399 | * scc_dev_select - Select device 0/1 on ATA bus |
a619f981 AI |
400 | * @ap: ATA channel to manipulate |
401 | * @device: ATA device (numbered from zero) to select | |
402 | * | |
9363c382 | 403 | * Note: Original code is ata_sff_dev_select(). |
a619f981 AI |
404 | */ |
405 | ||
9363c382 | 406 | static void scc_dev_select (struct ata_port *ap, unsigned int device) |
a619f981 AI |
407 | { |
408 | u8 tmp; | |
409 | ||
410 | if (device == 0) | |
411 | tmp = ATA_DEVICE_OBS; | |
412 | else | |
413 | tmp = ATA_DEVICE_OBS | ATA_DEV1; | |
414 | ||
415 | out_be32(ap->ioaddr.device_addr, tmp); | |
9363c382 | 416 | ata_sff_pause(ap); |
a619f981 AI |
417 | } |
418 | ||
419 | /** | |
420 | * scc_bmdma_setup - Set up PCI IDE BMDMA transaction | |
421 | * @qc: Info associated with this ATA transaction. | |
422 | * | |
423 | * Note: Original code is ata_bmdma_setup(). | |
424 | */ | |
425 | ||
426 | static void scc_bmdma_setup (struct ata_queued_cmd *qc) | |
427 | { | |
428 | struct ata_port *ap = qc->ap; | |
429 | unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); | |
430 | u8 dmactl; | |
431 | void __iomem *mmio = ap->ioaddr.bmdma_addr; | |
432 | ||
433 | /* load PRD table addr */ | |
434 | out_be32(mmio + SCC_DMA_TABLE_OFS, ap->prd_dma); | |
435 | ||
436 | /* specify data direction, triple-check start bit is clear */ | |
437 | dmactl = in_be32(mmio + SCC_DMA_CMD); | |
438 | dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); | |
439 | if (!rw) | |
440 | dmactl |= ATA_DMA_WR; | |
441 | out_be32(mmio + SCC_DMA_CMD, dmactl); | |
442 | ||
443 | /* issue r/w command */ | |
444 | ap->ops->exec_command(ap, &qc->tf); | |
445 | } | |
446 | ||
447 | /** | |
448 | * scc_bmdma_start - Start a PCI IDE BMDMA transaction | |
449 | * @qc: Info associated with this ATA transaction. | |
450 | * | |
451 | * Note: Original code is ata_bmdma_start(). | |
452 | */ | |
453 | ||
454 | static void scc_bmdma_start (struct ata_queued_cmd *qc) | |
455 | { | |
456 | struct ata_port *ap = qc->ap; | |
457 | u8 dmactl; | |
458 | void __iomem *mmio = ap->ioaddr.bmdma_addr; | |
459 | ||
460 | /* start host DMA transaction */ | |
461 | dmactl = in_be32(mmio + SCC_DMA_CMD); | |
462 | out_be32(mmio + SCC_DMA_CMD, dmactl | ATA_DMA_START); | |
463 | } | |
464 | ||
465 | /** | |
466 | * scc_devchk - PATA device presence detection | |
467 | * @ap: ATA channel to examine | |
468 | * @device: Device to examine (starting at zero) | |
469 | * | |
470 | * Note: Original code is ata_devchk(). | |
471 | */ | |
472 | ||
473 | static unsigned int scc_devchk (struct ata_port *ap, | |
474 | unsigned int device) | |
475 | { | |
476 | struct ata_ioports *ioaddr = &ap->ioaddr; | |
477 | u8 nsect, lbal; | |
478 | ||
479 | ap->ops->dev_select(ap, device); | |
480 | ||
481 | out_be32(ioaddr->nsect_addr, 0x55); | |
482 | out_be32(ioaddr->lbal_addr, 0xaa); | |
483 | ||
484 | out_be32(ioaddr->nsect_addr, 0xaa); | |
485 | out_be32(ioaddr->lbal_addr, 0x55); | |
486 | ||
487 | out_be32(ioaddr->nsect_addr, 0x55); | |
488 | out_be32(ioaddr->lbal_addr, 0xaa); | |
489 | ||
490 | nsect = in_be32(ioaddr->nsect_addr); | |
491 | lbal = in_be32(ioaddr->lbal_addr); | |
492 | ||
493 | if ((nsect == 0x55) && (lbal == 0xaa)) | |
494 | return 1; /* we found a device */ | |
495 | ||
496 | return 0; /* nothing found */ | |
497 | } | |
498 | ||
499 | /** | |
500 | * scc_bus_post_reset - PATA device post reset | |
501 | * | |
502 | * Note: Original code is ata_bus_post_reset(). | |
503 | */ | |
504 | ||
7e068376 TB |
505 | static int scc_bus_post_reset(struct ata_port *ap, unsigned int devmask, |
506 | unsigned long deadline) | |
a619f981 AI |
507 | { |
508 | struct ata_ioports *ioaddr = &ap->ioaddr; | |
509 | unsigned int dev0 = devmask & (1 << 0); | |
510 | unsigned int dev1 = devmask & (1 << 1); | |
7e068376 | 511 | int rc; |
a619f981 AI |
512 | |
513 | /* if device 0 was found in ata_devchk, wait for its | |
514 | * BSY bit to clear | |
515 | */ | |
7e068376 | 516 | if (dev0) { |
9363c382 | 517 | rc = ata_sff_wait_ready(ap, deadline); |
7e068376 TB |
518 | if (rc && rc != -ENODEV) |
519 | return rc; | |
520 | } | |
a619f981 AI |
521 | |
522 | /* if device 1 was found in ata_devchk, wait for | |
523 | * register access, then wait for BSY to clear | |
524 | */ | |
a619f981 AI |
525 | while (dev1) { |
526 | u8 nsect, lbal; | |
527 | ||
528 | ap->ops->dev_select(ap, 1); | |
529 | nsect = in_be32(ioaddr->nsect_addr); | |
530 | lbal = in_be32(ioaddr->lbal_addr); | |
531 | if ((nsect == 1) && (lbal == 1)) | |
532 | break; | |
7e068376 TB |
533 | if (time_after(jiffies, deadline)) |
534 | return -EBUSY; | |
a619f981 AI |
535 | msleep(50); /* give drive a breather */ |
536 | } | |
7e068376 | 537 | if (dev1) { |
9363c382 | 538 | rc = ata_sff_wait_ready(ap, deadline); |
7e068376 TB |
539 | if (rc && rc != -ENODEV) |
540 | return rc; | |
541 | } | |
a619f981 AI |
542 | |
543 | /* is all this really necessary? */ | |
544 | ap->ops->dev_select(ap, 0); | |
545 | if (dev1) | |
546 | ap->ops->dev_select(ap, 1); | |
547 | if (dev0) | |
548 | ap->ops->dev_select(ap, 0); | |
7e068376 TB |
549 | |
550 | return 0; | |
a619f981 AI |
551 | } |
552 | ||
553 | /** | |
554 | * scc_bus_softreset - PATA device software reset | |
555 | * | |
556 | * Note: Original code is ata_bus_softreset(). | |
557 | */ | |
558 | ||
7e068376 TB |
559 | static unsigned int scc_bus_softreset(struct ata_port *ap, unsigned int devmask, |
560 | unsigned long deadline) | |
a619f981 AI |
561 | { |
562 | struct ata_ioports *ioaddr = &ap->ioaddr; | |
563 | ||
878d4fed | 564 | DPRINTK("ata%u: bus reset via SRST\n", ap->print_id); |
a619f981 AI |
565 | |
566 | /* software reset. causes dev0 to be selected */ | |
567 | out_be32(ioaddr->ctl_addr, ap->ctl); | |
568 | udelay(20); | |
569 | out_be32(ioaddr->ctl_addr, ap->ctl | ATA_SRST); | |
570 | udelay(20); | |
571 | out_be32(ioaddr->ctl_addr, ap->ctl); | |
572 | ||
88ff6eaf | 573 | /* wait a while before checking status */ |
9363c382 | 574 | ata_sff_wait_after_reset(ap, deadline); |
a619f981 AI |
575 | |
576 | /* Before we perform post reset processing we want to see if | |
577 | * the bus shows 0xFF because the odd clown forgets the D7 | |
578 | * pulldown resistor. | |
579 | */ | |
580 | if (scc_check_status(ap) == 0xFF) | |
581 | return 0; | |
582 | ||
7e068376 | 583 | scc_bus_post_reset(ap, devmask, deadline); |
a619f981 AI |
584 | |
585 | return 0; | |
586 | } | |
587 | ||
588 | /** | |
9363c382 | 589 | * scc_softreset - reset host port via ATA SRST |
a619f981 AI |
590 | * @ap: port to reset |
591 | * @classes: resulting classes of attached devices | |
7e068376 | 592 | * @deadline: deadline jiffies for the operation |
a619f981 | 593 | * |
9363c382 | 594 | * Note: Original code is ata_sff_softreset(). |
a619f981 AI |
595 | */ |
596 | ||
9363c382 TH |
597 | static int scc_softreset(struct ata_link *link, unsigned int *classes, |
598 | unsigned long deadline) | |
a619f981 | 599 | { |
b90fe23b | 600 | struct ata_port *ap = link->ap; |
a619f981 AI |
601 | unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; |
602 | unsigned int devmask = 0, err_mask; | |
603 | u8 err; | |
604 | ||
605 | DPRINTK("ENTER\n"); | |
606 | ||
b90fe23b | 607 | if (ata_link_offline(link)) { |
a619f981 AI |
608 | classes[0] = ATA_DEV_NONE; |
609 | goto out; | |
610 | } | |
611 | ||
612 | /* determine if device 0/1 are present */ | |
613 | if (scc_devchk(ap, 0)) | |
614 | devmask |= (1 << 0); | |
615 | if (slave_possible && scc_devchk(ap, 1)) | |
616 | devmask |= (1 << 1); | |
617 | ||
618 | /* select device 0 again */ | |
619 | ap->ops->dev_select(ap, 0); | |
620 | ||
621 | /* issue bus reset */ | |
622 | DPRINTK("about to softreset, devmask=%x\n", devmask); | |
7e068376 | 623 | err_mask = scc_bus_softreset(ap, devmask, deadline); |
a619f981 AI |
624 | if (err_mask) { |
625 | ata_port_printk(ap, KERN_ERR, "SRST failed (err_mask=0x%x)\n", | |
626 | err_mask); | |
627 | return -EIO; | |
628 | } | |
629 | ||
630 | /* determine by signature whether we have ATA or ATAPI devices */ | |
9363c382 | 631 | classes[0] = ata_sff_dev_classify(&ap->link.device[0], |
3f19859e | 632 | devmask & (1 << 0), &err); |
a619f981 | 633 | if (slave_possible && err != 0x81) |
9363c382 | 634 | classes[1] = ata_sff_dev_classify(&ap->link.device[1], |
3f19859e | 635 | devmask & (1 << 1), &err); |
a619f981 AI |
636 | |
637 | out: | |
638 | DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]); | |
639 | return 0; | |
640 | } | |
641 | ||
642 | /** | |
643 | * scc_bmdma_stop - Stop PCI IDE BMDMA transfer | |
644 | * @qc: Command we are ending DMA for | |
645 | */ | |
646 | ||
647 | static void scc_bmdma_stop (struct ata_queued_cmd *qc) | |
648 | { | |
649 | struct ata_port *ap = qc->ap; | |
650 | void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR]; | |
651 | void __iomem *bmid_base = ap->host->iomap[SCC_BMID_BAR]; | |
652 | u32 reg; | |
653 | ||
654 | while (1) { | |
655 | reg = in_be32(bmid_base + SCC_DMA_INTST); | |
656 | ||
657 | if (reg & INTSTS_SERROR) { | |
658 | printk(KERN_WARNING "%s: SERROR\n", DRV_NAME); | |
659 | out_be32(bmid_base + SCC_DMA_INTST, INTSTS_SERROR|INTSTS_BMSINT); | |
660 | out_be32(bmid_base + SCC_DMA_CMD, | |
661 | in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); | |
662 | continue; | |
663 | } | |
664 | ||
665 | if (reg & INTSTS_PRERR) { | |
666 | u32 maea0, maec0; | |
667 | maea0 = in_be32(ctrl_base + SCC_CTL_MAEA0); | |
668 | maec0 = in_be32(ctrl_base + SCC_CTL_MAEC0); | |
669 | printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", DRV_NAME, maea0, maec0); | |
670 | out_be32(bmid_base + SCC_DMA_INTST, INTSTS_PRERR|INTSTS_BMSINT); | |
671 | out_be32(bmid_base + SCC_DMA_CMD, | |
672 | in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); | |
673 | continue; | |
674 | } | |
675 | ||
676 | if (reg & INTSTS_RERR) { | |
677 | printk(KERN_WARNING "%s: Response Error\n", DRV_NAME); | |
678 | out_be32(bmid_base + SCC_DMA_INTST, INTSTS_RERR|INTSTS_BMSINT); | |
679 | out_be32(bmid_base + SCC_DMA_CMD, | |
680 | in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); | |
681 | continue; | |
682 | } | |
683 | ||
684 | if (reg & INTSTS_ICERR) { | |
685 | out_be32(bmid_base + SCC_DMA_CMD, | |
686 | in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); | |
687 | printk(KERN_WARNING "%s: Illegal Configuration\n", DRV_NAME); | |
688 | out_be32(bmid_base + SCC_DMA_INTST, INTSTS_ICERR|INTSTS_BMSINT); | |
689 | continue; | |
690 | } | |
691 | ||
692 | if (reg & INTSTS_BMSINT) { | |
693 | unsigned int classes; | |
7e068376 | 694 | unsigned long deadline = jiffies + ATA_TMOUT_BOOT; |
a619f981 AI |
695 | printk(KERN_WARNING "%s: Internal Bus Error\n", DRV_NAME); |
696 | out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMSINT); | |
697 | /* TBD: SW reset */ | |
9363c382 | 698 | scc_softreset(&ap->link, &classes, deadline); |
a619f981 AI |
699 | continue; |
700 | } | |
701 | ||
702 | if (reg & INTSTS_BMHE) { | |
703 | out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMHE); | |
704 | continue; | |
705 | } | |
706 | ||
707 | if (reg & INTSTS_ACTEINT) { | |
708 | out_be32(bmid_base + SCC_DMA_INTST, INTSTS_ACTEINT); | |
709 | continue; | |
710 | } | |
711 | ||
712 | if (reg & INTSTS_IOIRQS) { | |
713 | out_be32(bmid_base + SCC_DMA_INTST, INTSTS_IOIRQS); | |
714 | continue; | |
715 | } | |
716 | break; | |
717 | } | |
718 | ||
719 | /* clear start/stop bit */ | |
720 | out_be32(bmid_base + SCC_DMA_CMD, | |
721 | in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); | |
722 | ||
723 | /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ | |
9363c382 | 724 | ata_sff_altstatus(ap); /* dummy read */ |
a619f981 AI |
725 | } |
726 | ||
727 | /** | |
728 | * scc_bmdma_status - Read PCI IDE BMDMA status | |
729 | * @ap: Port associated with this ATA transaction. | |
730 | */ | |
731 | ||
732 | static u8 scc_bmdma_status (struct ata_port *ap) | |
733 | { | |
a619f981 | 734 | void __iomem *mmio = ap->ioaddr.bmdma_addr; |
fae57d34 AI |
735 | u8 host_stat = in_be32(mmio + SCC_DMA_STATUS); |
736 | u32 int_status = in_be32(mmio + SCC_DMA_INTST); | |
b90fe23b | 737 | struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag); |
fae57d34 AI |
738 | static int retry = 0; |
739 | ||
740 | /* return if IOS_SS is cleared */ | |
741 | if (!(in_be32(mmio + SCC_DMA_CMD) & ATA_DMA_START)) | |
742 | return host_stat; | |
743 | ||
744 | /* errata A252,A308 workaround: Step4 */ | |
9363c382 | 745 | if ((ata_sff_altstatus(ap) & ATA_ERR) && (int_status & INTSTS_INTRQ)) |
fae57d34 AI |
746 | return (host_stat | ATA_DMA_INTR); |
747 | ||
748 | /* errata A308 workaround Step5 */ | |
749 | if (int_status & INTSTS_IOIRQS) { | |
750 | host_stat |= ATA_DMA_INTR; | |
751 | ||
752 | /* We don't check ATAPI DMA because it is limited to UDMA4 */ | |
753 | if ((qc->tf.protocol == ATA_PROT_DMA && | |
754 | qc->dev->xfer_mode > XFER_UDMA_4)) { | |
755 | if (!(int_status & INTSTS_ACTEINT)) { | |
dcd03447 AI |
756 | printk(KERN_WARNING "ata%u: operation failed (transfer data loss)\n", |
757 | ap->print_id); | |
fae57d34 AI |
758 | host_stat |= ATA_DMA_ERR; |
759 | if (retry++) | |
dcd03447 | 760 | ap->udma_mask &= ~(1 << qc->dev->xfer_mode); |
fae57d34 AI |
761 | } else |
762 | retry = 0; | |
763 | } | |
a619f981 AI |
764 | } |
765 | ||
766 | return host_stat; | |
767 | } | |
768 | ||
769 | /** | |
770 | * scc_data_xfer - Transfer data by PIO | |
55dba312 | 771 | * @dev: device for this I/O |
a619f981 AI |
772 | * @buf: data buffer |
773 | * @buflen: buffer length | |
55dba312 | 774 | * @rw: read/write |
a619f981 | 775 | * |
9363c382 | 776 | * Note: Original code is ata_sff_data_xfer(). |
a619f981 AI |
777 | */ |
778 | ||
55dba312 TH |
779 | static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf, |
780 | unsigned int buflen, int rw) | |
a619f981 | 781 | { |
55dba312 | 782 | struct ata_port *ap = dev->link->ap; |
a619f981 AI |
783 | unsigned int words = buflen >> 1; |
784 | unsigned int i; | |
826cd156 | 785 | __le16 *buf16 = (__le16 *) buf; |
a619f981 AI |
786 | void __iomem *mmio = ap->ioaddr.data_addr; |
787 | ||
788 | /* Transfer multiple of 2 bytes */ | |
55dba312 | 789 | if (rw == READ) |
a619f981 | 790 | for (i = 0; i < words; i++) |
826cd156 | 791 | buf16[i] = cpu_to_le16(in_be32(mmio)); |
55dba312 TH |
792 | else |
793 | for (i = 0; i < words; i++) | |
826cd156 | 794 | out_be32(mmio, le16_to_cpu(buf16[i])); |
a619f981 AI |
795 | |
796 | /* Transfer trailing 1 byte, if any. */ | |
797 | if (unlikely(buflen & 0x01)) { | |
826cd156 | 798 | __le16 align_buf[1] = { 0 }; |
a619f981 AI |
799 | unsigned char *trailing_buf = buf + buflen - 1; |
800 | ||
55dba312 | 801 | if (rw == READ) { |
826cd156 | 802 | align_buf[0] = cpu_to_le16(in_be32(mmio)); |
a619f981 | 803 | memcpy(trailing_buf, align_buf, 1); |
55dba312 TH |
804 | } else { |
805 | memcpy(align_buf, trailing_buf, 1); | |
826cd156 | 806 | out_be32(mmio, le16_to_cpu(align_buf[0])); |
a619f981 | 807 | } |
55dba312 | 808 | words++; |
a619f981 | 809 | } |
55dba312 TH |
810 | |
811 | return words << 1; | |
a619f981 AI |
812 | } |
813 | ||
814 | /** | |
815 | * scc_irq_on - Enable interrupts on a port. | |
816 | * @ap: Port on which interrupts are enabled. | |
817 | * | |
9363c382 | 818 | * Note: Original code is ata_sff_irq_on(). |
a619f981 AI |
819 | */ |
820 | ||
821 | static u8 scc_irq_on (struct ata_port *ap) | |
822 | { | |
823 | struct ata_ioports *ioaddr = &ap->ioaddr; | |
824 | u8 tmp; | |
825 | ||
826 | ap->ctl &= ~ATA_NIEN; | |
827 | ap->last_ctl = ap->ctl; | |
828 | ||
829 | out_be32(ioaddr->ctl_addr, ap->ctl); | |
830 | tmp = ata_wait_idle(ap); | |
831 | ||
832 | ap->ops->irq_clear(ap); | |
833 | ||
834 | return tmp; | |
835 | } | |
836 | ||
a619f981 | 837 | /** |
9363c382 | 838 | * scc_freeze - Freeze BMDMA controller port |
a619f981 AI |
839 | * @ap: port to freeze |
840 | * | |
9363c382 | 841 | * Note: Original code is ata_sff_freeze(). |
a619f981 AI |
842 | */ |
843 | ||
9363c382 | 844 | static void scc_freeze (struct ata_port *ap) |
a619f981 AI |
845 | { |
846 | struct ata_ioports *ioaddr = &ap->ioaddr; | |
847 | ||
848 | ap->ctl |= ATA_NIEN; | |
849 | ap->last_ctl = ap->ctl; | |
850 | ||
851 | out_be32(ioaddr->ctl_addr, ap->ctl); | |
852 | ||
853 | /* Under certain circumstances, some controllers raise IRQ on | |
854 | * ATA_NIEN manipulation. Also, many controllers fail to mask | |
855 | * previously pending IRQ on ATA_NIEN assertion. Clear it. | |
856 | */ | |
6fd36390 | 857 | ap->ops->check_status(ap); |
a619f981 AI |
858 | |
859 | ap->ops->irq_clear(ap); | |
860 | } | |
861 | ||
862 | /** | |
863 | * scc_pata_prereset - prepare for reset | |
864 | * @ap: ATA port to be reset | |
7e068376 | 865 | * @deadline: deadline jiffies for the operation |
a619f981 AI |
866 | */ |
867 | ||
b90fe23b | 868 | static int scc_pata_prereset(struct ata_link *link, unsigned long deadline) |
a619f981 | 869 | { |
b90fe23b | 870 | link->ap->cbl = ATA_CBL_PATA80; |
9363c382 | 871 | return ata_sff_prereset(link, deadline); |
a619f981 AI |
872 | } |
873 | ||
874 | /** | |
9363c382 | 875 | * scc_postreset - standard postreset callback |
a619f981 AI |
876 | * @ap: the target ata_port |
877 | * @classes: classes of attached devices | |
878 | * | |
9363c382 | 879 | * Note: Original code is ata_sff_postreset(). |
a619f981 AI |
880 | */ |
881 | ||
9363c382 | 882 | static void scc_postreset(struct ata_link *link, unsigned int *classes) |
a619f981 | 883 | { |
b90fe23b SS |
884 | struct ata_port *ap = link->ap; |
885 | ||
a619f981 AI |
886 | DPRINTK("ENTER\n"); |
887 | ||
a619f981 AI |
888 | /* is double-select really necessary? */ |
889 | if (classes[0] != ATA_DEV_NONE) | |
890 | ap->ops->dev_select(ap, 1); | |
891 | if (classes[1] != ATA_DEV_NONE) | |
892 | ap->ops->dev_select(ap, 0); | |
893 | ||
894 | /* bail out if no device is present */ | |
895 | if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) { | |
896 | DPRINTK("EXIT, no device\n"); | |
897 | return; | |
898 | } | |
899 | ||
900 | /* set up device control */ | |
901 | if (ap->ioaddr.ctl_addr) | |
902 | out_be32(ap->ioaddr.ctl_addr, ap->ctl); | |
903 | ||
904 | DPRINTK("EXIT\n"); | |
905 | } | |
906 | ||
a619f981 | 907 | /** |
9363c382 | 908 | * scc_irq_clear - Clear PCI IDE BMDMA interrupt. |
a619f981 AI |
909 | * @ap: Port associated with this ATA transaction. |
910 | * | |
9363c382 | 911 | * Note: Original code is ata_sff_irq_clear(). |
a619f981 AI |
912 | */ |
913 | ||
9363c382 | 914 | static void scc_irq_clear (struct ata_port *ap) |
a619f981 AI |
915 | { |
916 | void __iomem *mmio = ap->ioaddr.bmdma_addr; | |
917 | ||
918 | if (!mmio) | |
919 | return; | |
920 | ||
921 | out_be32(mmio + SCC_DMA_STATUS, in_be32(mmio + SCC_DMA_STATUS)); | |
922 | } | |
923 | ||
924 | /** | |
925 | * scc_port_start - Set port up for dma. | |
926 | * @ap: Port to initialize | |
927 | * | |
928 | * Allocate space for PRD table using ata_port_start(). | |
929 | * Set PRD table address for PTERADD. (PRD Transfer End Read) | |
930 | */ | |
931 | ||
932 | static int scc_port_start (struct ata_port *ap) | |
933 | { | |
934 | void __iomem *mmio = ap->ioaddr.bmdma_addr; | |
935 | int rc; | |
936 | ||
937 | rc = ata_port_start(ap); | |
938 | if (rc) | |
939 | return rc; | |
940 | ||
941 | out_be32(mmio + SCC_DMA_PTERADD, ap->prd_dma); | |
942 | return 0; | |
943 | } | |
944 | ||
945 | /** | |
946 | * scc_port_stop - Undo scc_port_start() | |
947 | * @ap: Port to shut down | |
948 | * | |
949 | * Reset PTERADD. | |
950 | */ | |
951 | ||
952 | static void scc_port_stop (struct ata_port *ap) | |
953 | { | |
954 | void __iomem *mmio = ap->ioaddr.bmdma_addr; | |
955 | ||
956 | out_be32(mmio + SCC_DMA_PTERADD, 0); | |
957 | } | |
958 | ||
959 | static struct scsi_host_template scc_sht = { | |
68d1d07b | 960 | ATA_BMDMA_SHT(DRV_NAME), |
a619f981 AI |
961 | }; |
962 | ||
c1796d98 | 963 | static struct ata_port_operations scc_pata_ops = { |
029cfd6b TH |
964 | .inherits = &ata_bmdma_port_ops, |
965 | ||
a619f981 AI |
966 | .set_piomode = scc_set_piomode, |
967 | .set_dmamode = scc_set_dmamode, | |
dcd03447 | 968 | .mode_filter = scc_mode_filter, |
a619f981 AI |
969 | |
970 | .tf_load = scc_tf_load, | |
971 | .tf_read = scc_tf_read, | |
972 | .exec_command = scc_exec_command, | |
973 | .check_status = scc_check_status, | |
974 | .check_altstatus = scc_check_altstatus, | |
9363c382 | 975 | .dev_select = scc_dev_select, |
a619f981 AI |
976 | |
977 | .bmdma_setup = scc_bmdma_setup, | |
978 | .bmdma_start = scc_bmdma_start, | |
979 | .bmdma_stop = scc_bmdma_stop, | |
980 | .bmdma_status = scc_bmdma_status, | |
981 | .data_xfer = scc_data_xfer, | |
982 | ||
9363c382 | 983 | .freeze = scc_freeze, |
a1efdaba | 984 | .prereset = scc_pata_prereset, |
9363c382 TH |
985 | .softreset = scc_softreset, |
986 | .postreset = scc_postreset, | |
a619f981 AI |
987 | .post_internal_cmd = scc_bmdma_stop, |
988 | ||
9363c382 | 989 | .irq_clear = scc_irq_clear, |
a619f981 | 990 | .irq_on = scc_irq_on, |
a619f981 AI |
991 | |
992 | .port_start = scc_port_start, | |
993 | .port_stop = scc_port_stop, | |
994 | }; | |
995 | ||
996 | static struct ata_port_info scc_port_info[] = { | |
997 | { | |
a619f981 AI |
998 | .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY, |
999 | .pio_mask = 0x1f, /* pio0-4 */ | |
1000 | .mwdma_mask = 0x00, | |
1001 | .udma_mask = ATA_UDMA6, | |
1002 | .port_ops = &scc_pata_ops, | |
1003 | }, | |
1004 | }; | |
1005 | ||
1006 | /** | |
1007 | * scc_reset_controller - initialize SCC PATA controller. | |
1008 | */ | |
1009 | ||
5d728824 | 1010 | static int scc_reset_controller(struct ata_host *host) |
a619f981 | 1011 | { |
5d728824 TH |
1012 | void __iomem *ctrl_base = host->iomap[SCC_CTRL_BAR]; |
1013 | void __iomem *bmid_base = host->iomap[SCC_BMID_BAR]; | |
a619f981 AI |
1014 | void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL; |
1015 | void __iomem *mode_port = ctrl_base + SCC_CTL_MODEREG; | |
1016 | void __iomem *ecmode_port = ctrl_base + SCC_CTL_ECMODE; | |
1017 | void __iomem *intmask_port = bmid_base + SCC_DMA_INTMASK; | |
1018 | void __iomem *dmastatus_port = bmid_base + SCC_DMA_STATUS; | |
1019 | u32 reg = 0; | |
1020 | ||
1021 | out_be32(cckctrl_port, reg); | |
1022 | reg |= CCKCTRL_ATACLKOEN; | |
1023 | out_be32(cckctrl_port, reg); | |
1024 | reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN; | |
1025 | out_be32(cckctrl_port, reg); | |
1026 | reg |= CCKCTRL_CRST; | |
1027 | out_be32(cckctrl_port, reg); | |
1028 | ||
1029 | for (;;) { | |
1030 | reg = in_be32(cckctrl_port); | |
1031 | if (reg & CCKCTRL_CRST) | |
1032 | break; | |
1033 | udelay(5000); | |
1034 | } | |
1035 | ||
1036 | reg |= CCKCTRL_ATARESET; | |
1037 | out_be32(cckctrl_port, reg); | |
1038 | out_be32(ecmode_port, ECMODE_VALUE); | |
1039 | out_be32(mode_port, MODE_JCUSFEN); | |
1040 | out_be32(intmask_port, INTMASK_MSK); | |
1041 | ||
1042 | if (in_be32(dmastatus_port) & QCHSD_STPDIAG) { | |
1043 | printk(KERN_WARNING "%s: failed to detect 80c cable. (PDIAG# is high)\n", DRV_NAME); | |
1044 | return -EIO; | |
1045 | } | |
1046 | ||
1047 | return 0; | |
1048 | } | |
1049 | ||
1050 | /** | |
1051 | * scc_setup_ports - initialize ioaddr with SCC PATA port offsets. | |
1052 | * @ioaddr: IO address structure to be initialized | |
1053 | * @base: base address of BMID region | |
1054 | */ | |
1055 | ||
1056 | static void scc_setup_ports (struct ata_ioports *ioaddr, void __iomem *base) | |
1057 | { | |
1058 | ioaddr->cmd_addr = base + SCC_REG_CMD_ADDR; | |
1059 | ioaddr->altstatus_addr = ioaddr->cmd_addr + SCC_REG_ALTSTATUS; | |
1060 | ioaddr->ctl_addr = ioaddr->cmd_addr + SCC_REG_ALTSTATUS; | |
1061 | ioaddr->bmdma_addr = base; | |
1062 | ioaddr->data_addr = ioaddr->cmd_addr + SCC_REG_DATA; | |
1063 | ioaddr->error_addr = ioaddr->cmd_addr + SCC_REG_ERR; | |
1064 | ioaddr->feature_addr = ioaddr->cmd_addr + SCC_REG_FEATURE; | |
1065 | ioaddr->nsect_addr = ioaddr->cmd_addr + SCC_REG_NSECT; | |
1066 | ioaddr->lbal_addr = ioaddr->cmd_addr + SCC_REG_LBAL; | |
1067 | ioaddr->lbam_addr = ioaddr->cmd_addr + SCC_REG_LBAM; | |
1068 | ioaddr->lbah_addr = ioaddr->cmd_addr + SCC_REG_LBAH; | |
1069 | ioaddr->device_addr = ioaddr->cmd_addr + SCC_REG_DEVICE; | |
1070 | ioaddr->status_addr = ioaddr->cmd_addr + SCC_REG_STATUS; | |
1071 | ioaddr->command_addr = ioaddr->cmd_addr + SCC_REG_CMD; | |
1072 | } | |
1073 | ||
5d728824 | 1074 | static int scc_host_init(struct ata_host *host) |
a619f981 | 1075 | { |
5d728824 | 1076 | struct pci_dev *pdev = to_pci_dev(host->dev); |
a619f981 AI |
1077 | int rc; |
1078 | ||
5d728824 | 1079 | rc = scc_reset_controller(host); |
a619f981 AI |
1080 | if (rc) |
1081 | return rc; | |
1082 | ||
a619f981 AI |
1083 | rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); |
1084 | if (rc) | |
1085 | return rc; | |
1086 | rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); | |
1087 | if (rc) | |
1088 | return rc; | |
1089 | ||
5d728824 | 1090 | scc_setup_ports(&host->ports[0]->ioaddr, host->iomap[SCC_BMID_BAR]); |
a619f981 AI |
1091 | |
1092 | pci_set_master(pdev); | |
1093 | ||
1094 | return 0; | |
1095 | } | |
1096 | ||
1097 | /** | |
1098 | * scc_init_one - Register SCC PATA device with kernel services | |
1099 | * @pdev: PCI device to register | |
1100 | * @ent: Entry in scc_pci_tbl matching with @pdev | |
1101 | * | |
1102 | * LOCKING: | |
1103 | * Inherited from PCI layer (may sleep). | |
1104 | * | |
1105 | * RETURNS: | |
1106 | * Zero on success, or -ERRNO value. | |
1107 | */ | |
1108 | ||
1109 | static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) | |
1110 | { | |
1111 | static int printed_version; | |
1112 | unsigned int board_idx = (unsigned int) ent->driver_data; | |
5d728824 | 1113 | const struct ata_port_info *ppi[] = { &scc_port_info[board_idx], NULL }; |
0397bad5 | 1114 | struct ata_host *host; |
a619f981 AI |
1115 | int rc; |
1116 | ||
1117 | if (!printed_version++) | |
1118 | dev_printk(KERN_DEBUG, &pdev->dev, | |
1119 | "version " DRV_VERSION "\n"); | |
1120 | ||
0397bad5 | 1121 | host = ata_host_alloc_pinfo(&pdev->dev, ppi, 1); |
5d728824 TH |
1122 | if (!host) |
1123 | return -ENOMEM; | |
1124 | ||
a619f981 AI |
1125 | rc = pcim_enable_device(pdev); |
1126 | if (rc) | |
1127 | return rc; | |
1128 | ||
1129 | rc = pcim_iomap_regions(pdev, (1 << SCC_CTRL_BAR) | (1 << SCC_BMID_BAR), DRV_NAME); | |
1130 | if (rc == -EBUSY) | |
1131 | pcim_pin_device(pdev); | |
1132 | if (rc) | |
1133 | return rc; | |
5d728824 | 1134 | host->iomap = pcim_iomap_table(pdev); |
a619f981 | 1135 | |
cbcdd875 TH |
1136 | ata_port_pbar_desc(host->ports[0], SCC_CTRL_BAR, -1, "ctrl"); |
1137 | ata_port_pbar_desc(host->ports[0], SCC_BMID_BAR, -1, "bmid"); | |
1138 | ||
5d728824 | 1139 | rc = scc_host_init(host); |
a619f981 AI |
1140 | if (rc) |
1141 | return rc; | |
1142 | ||
9363c382 TH |
1143 | return ata_host_activate(host, pdev->irq, ata_sff_interrupt, |
1144 | IRQF_SHARED, &scc_sht); | |
a619f981 AI |
1145 | } |
1146 | ||
1147 | static struct pci_driver scc_pci_driver = { | |
1148 | .name = DRV_NAME, | |
1149 | .id_table = scc_pci_tbl, | |
1150 | .probe = scc_init_one, | |
1151 | .remove = ata_pci_remove_one, | |
1152 | #ifdef CONFIG_PM | |
1153 | .suspend = ata_pci_device_suspend, | |
1154 | .resume = ata_pci_device_resume, | |
1155 | #endif | |
1156 | }; | |
1157 | ||
1158 | static int __init scc_init (void) | |
1159 | { | |
1160 | int rc; | |
1161 | ||
1162 | DPRINTK("pci_register_driver\n"); | |
1163 | rc = pci_register_driver(&scc_pci_driver); | |
1164 | if (rc) | |
1165 | return rc; | |
1166 | ||
1167 | DPRINTK("done\n"); | |
1168 | return 0; | |
1169 | } | |
1170 | ||
1171 | static void __exit scc_exit (void) | |
1172 | { | |
1173 | pci_unregister_driver(&scc_pci_driver); | |
1174 | } | |
1175 | ||
1176 | module_init(scc_init); | |
1177 | module_exit(scc_exit); | |
1178 | ||
1179 | MODULE_AUTHOR("Toshiba corp"); | |
1180 | MODULE_DESCRIPTION("SCSI low-level driver for Toshiba SCC PATA controller"); | |
1181 | MODULE_LICENSE("GPL"); | |
1182 | MODULE_DEVICE_TABLE(pci, scc_pci_tbl); | |
1183 | MODULE_VERSION(DRV_VERSION); |