]>
Commit | Line | Data |
---|---|---|
163cf81d VB |
1 | /* |
2 | * Renesas R-Car SATA driver | |
3 | * | |
4 | * Author: Vladimir Barinov <source@cogentembedded.com> | |
5 | * Copyright (C) 2013 Cogent Embedded, Inc. | |
6 | * Copyright (C) 2013 Renesas Solutions Corp. | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or modify it | |
9 | * under the terms of the GNU General Public License as published by the | |
10 | * Free Software Foundation; either version 2 of the License, or (at your | |
11 | * option) any later version. | |
12 | */ | |
13 | ||
14 | #include <linux/kernel.h> | |
15 | #include <linux/module.h> | |
16 | #include <linux/ata.h> | |
17 | #include <linux/libata.h> | |
18 | #include <linux/platform_device.h> | |
19 | #include <linux/clk.h> | |
2de1d5e1 | 20 | #include <linux/err.h> |
163cf81d VB |
21 | |
22 | #define DRV_NAME "sata_rcar" | |
23 | ||
24 | /* SH-Navi2G/ATAPI-ATA compatible task registers */ | |
25 | #define DATA_REG 0x100 | |
26 | #define SDEVCON_REG 0x138 | |
27 | ||
28 | /* SH-Navi2G/ATAPI module compatible control registers */ | |
29 | #define ATAPI_CONTROL1_REG 0x180 | |
30 | #define ATAPI_STATUS_REG 0x184 | |
31 | #define ATAPI_INT_ENABLE_REG 0x188 | |
32 | #define ATAPI_DTB_ADR_REG 0x198 | |
33 | #define ATAPI_DMA_START_ADR_REG 0x19C | |
34 | #define ATAPI_DMA_TRANS_CNT_REG 0x1A0 | |
35 | #define ATAPI_CONTROL2_REG 0x1A4 | |
36 | #define ATAPI_SIG_ST_REG 0x1B0 | |
37 | #define ATAPI_BYTE_SWAP_REG 0x1BC | |
38 | ||
39 | /* ATAPI control 1 register (ATAPI_CONTROL1) bits */ | |
40 | #define ATAPI_CONTROL1_ISM BIT(16) | |
41 | #define ATAPI_CONTROL1_DTA32M BIT(11) | |
42 | #define ATAPI_CONTROL1_RESET BIT(7) | |
43 | #define ATAPI_CONTROL1_DESE BIT(3) | |
44 | #define ATAPI_CONTROL1_RW BIT(2) | |
45 | #define ATAPI_CONTROL1_STOP BIT(1) | |
46 | #define ATAPI_CONTROL1_START BIT(0) | |
47 | ||
48 | /* ATAPI status register (ATAPI_STATUS) bits */ | |
49 | #define ATAPI_STATUS_SATAINT BIT(11) | |
50 | #define ATAPI_STATUS_DNEND BIT(6) | |
51 | #define ATAPI_STATUS_DEVTRM BIT(5) | |
52 | #define ATAPI_STATUS_DEVINT BIT(4) | |
53 | #define ATAPI_STATUS_ERR BIT(2) | |
54 | #define ATAPI_STATUS_NEND BIT(1) | |
55 | #define ATAPI_STATUS_ACT BIT(0) | |
56 | ||
57 | /* Interrupt enable register (ATAPI_INT_ENABLE) bits */ | |
58 | #define ATAPI_INT_ENABLE_SATAINT BIT(11) | |
59 | #define ATAPI_INT_ENABLE_DNEND BIT(6) | |
60 | #define ATAPI_INT_ENABLE_DEVTRM BIT(5) | |
61 | #define ATAPI_INT_ENABLE_DEVINT BIT(4) | |
62 | #define ATAPI_INT_ENABLE_ERR BIT(2) | |
63 | #define ATAPI_INT_ENABLE_NEND BIT(1) | |
64 | #define ATAPI_INT_ENABLE_ACT BIT(0) | |
65 | ||
66 | /* Access control registers for physical layer control register */ | |
67 | #define SATAPHYADDR_REG 0x200 | |
68 | #define SATAPHYWDATA_REG 0x204 | |
69 | #define SATAPHYACCEN_REG 0x208 | |
70 | #define SATAPHYRESET_REG 0x20C | |
71 | #define SATAPHYRDATA_REG 0x210 | |
72 | #define SATAPHYACK_REG 0x214 | |
73 | ||
74 | /* Physical layer control address command register (SATAPHYADDR) bits */ | |
75 | #define SATAPHYADDR_PHYRATEMODE BIT(10) | |
76 | #define SATAPHYADDR_PHYCMD_READ BIT(9) | |
77 | #define SATAPHYADDR_PHYCMD_WRITE BIT(8) | |
78 | ||
79 | /* Physical layer control enable register (SATAPHYACCEN) bits */ | |
80 | #define SATAPHYACCEN_PHYLANE BIT(0) | |
81 | ||
82 | /* Physical layer control reset register (SATAPHYRESET) bits */ | |
83 | #define SATAPHYRESET_PHYRST BIT(1) | |
84 | #define SATAPHYRESET_PHYSRES BIT(0) | |
85 | ||
86 | /* Physical layer control acknowledge register (SATAPHYACK) bits */ | |
87 | #define SATAPHYACK_PHYACK BIT(0) | |
88 | ||
89 | /* Serial-ATA HOST control registers */ | |
90 | #define BISTCONF_REG 0x102C | |
91 | #define SDATA_REG 0x1100 | |
92 | #define SSDEVCON_REG 0x1204 | |
93 | ||
94 | #define SCRSSTS_REG 0x1400 | |
95 | #define SCRSERR_REG 0x1404 | |
96 | #define SCRSCON_REG 0x1408 | |
97 | #define SCRSACT_REG 0x140C | |
98 | ||
99 | #define SATAINTSTAT_REG 0x1508 | |
100 | #define SATAINTMASK_REG 0x150C | |
101 | ||
102 | /* SATA INT status register (SATAINTSTAT) bits */ | |
103 | #define SATAINTSTAT_SERR BIT(3) | |
104 | #define SATAINTSTAT_ATA BIT(0) | |
105 | ||
106 | /* SATA INT mask register (SATAINTSTAT) bits */ | |
107 | #define SATAINTMASK_SERRMSK BIT(3) | |
108 | #define SATAINTMASK_ERRMSK BIT(2) | |
109 | #define SATAINTMASK_ERRCRTMSK BIT(1) | |
110 | #define SATAINTMASK_ATAMSK BIT(0) | |
111 | ||
112 | #define SATA_RCAR_INT_MASK (SATAINTMASK_SERRMSK | \ | |
113 | SATAINTMASK_ATAMSK) | |
114 | ||
115 | /* Physical Layer Control Registers */ | |
116 | #define SATAPCTLR1_REG 0x43 | |
117 | #define SATAPCTLR2_REG 0x52 | |
118 | #define SATAPCTLR3_REG 0x5A | |
119 | #define SATAPCTLR4_REG 0x60 | |
120 | ||
121 | /* Descriptor table word 0 bit (when DTA32M = 1) */ | |
122 | #define SATA_RCAR_DTEND BIT(0) | |
123 | ||
124 | struct sata_rcar_priv { | |
125 | void __iomem *base; | |
126 | struct clk *clk; | |
127 | }; | |
128 | ||
129 | static void sata_rcar_phy_initialize(struct sata_rcar_priv *priv) | |
130 | { | |
131 | /* idle state */ | |
132 | iowrite32(0, priv->base + SATAPHYADDR_REG); | |
133 | /* reset */ | |
134 | iowrite32(SATAPHYRESET_PHYRST, priv->base + SATAPHYRESET_REG); | |
135 | udelay(10); | |
136 | /* deassert reset */ | |
137 | iowrite32(0, priv->base + SATAPHYRESET_REG); | |
138 | } | |
139 | ||
140 | static void sata_rcar_phy_write(struct sata_rcar_priv *priv, u16 reg, u32 val, | |
141 | int group) | |
142 | { | |
143 | int timeout; | |
144 | ||
145 | /* deassert reset */ | |
146 | iowrite32(0, priv->base + SATAPHYRESET_REG); | |
147 | /* lane 1 */ | |
148 | iowrite32(SATAPHYACCEN_PHYLANE, priv->base + SATAPHYACCEN_REG); | |
149 | /* write phy register value */ | |
150 | iowrite32(val, priv->base + SATAPHYWDATA_REG); | |
151 | /* set register group */ | |
152 | if (group) | |
153 | reg |= SATAPHYADDR_PHYRATEMODE; | |
154 | /* write command */ | |
155 | iowrite32(SATAPHYADDR_PHYCMD_WRITE | reg, priv->base + SATAPHYADDR_REG); | |
156 | /* wait for ack */ | |
157 | for (timeout = 0; timeout < 100; timeout++) { | |
158 | val = ioread32(priv->base + SATAPHYACK_REG); | |
159 | if (val & SATAPHYACK_PHYACK) | |
160 | break; | |
161 | } | |
162 | if (timeout >= 100) | |
163 | pr_err("%s timeout\n", __func__); | |
164 | /* idle state */ | |
165 | iowrite32(0, priv->base + SATAPHYADDR_REG); | |
166 | } | |
167 | ||
168 | static void sata_rcar_freeze(struct ata_port *ap) | |
169 | { | |
170 | struct sata_rcar_priv *priv = ap->host->private_data; | |
171 | ||
172 | /* mask */ | |
173 | iowrite32(0x7ff, priv->base + SATAINTMASK_REG); | |
174 | ||
175 | ata_sff_freeze(ap); | |
176 | } | |
177 | ||
178 | static void sata_rcar_thaw(struct ata_port *ap) | |
179 | { | |
180 | struct sata_rcar_priv *priv = ap->host->private_data; | |
181 | ||
182 | /* ack */ | |
183 | iowrite32(~SATA_RCAR_INT_MASK, priv->base + SATAINTSTAT_REG); | |
184 | ||
185 | ata_sff_thaw(ap); | |
186 | ||
187 | /* unmask */ | |
188 | iowrite32(0x7ff & ~SATA_RCAR_INT_MASK, priv->base + SATAINTMASK_REG); | |
189 | } | |
190 | ||
191 | static void sata_rcar_ioread16_rep(void __iomem *reg, void *buffer, int count) | |
192 | { | |
193 | u16 *ptr = buffer; | |
194 | ||
195 | while (count--) { | |
196 | u16 data = ioread32(reg); | |
197 | ||
198 | *ptr++ = data; | |
199 | } | |
200 | } | |
201 | ||
202 | static void sata_rcar_iowrite16_rep(void __iomem *reg, void *buffer, int count) | |
203 | { | |
204 | const u16 *ptr = buffer; | |
205 | ||
206 | while (count--) | |
207 | iowrite32(*ptr++, reg); | |
208 | } | |
209 | ||
210 | static u8 sata_rcar_check_status(struct ata_port *ap) | |
211 | { | |
212 | return ioread32(ap->ioaddr.status_addr); | |
213 | } | |
214 | ||
215 | static u8 sata_rcar_check_altstatus(struct ata_port *ap) | |
216 | { | |
217 | return ioread32(ap->ioaddr.altstatus_addr); | |
218 | } | |
219 | ||
220 | static void sata_rcar_set_devctl(struct ata_port *ap, u8 ctl) | |
221 | { | |
222 | iowrite32(ctl, ap->ioaddr.ctl_addr); | |
223 | } | |
224 | ||
225 | static void sata_rcar_dev_select(struct ata_port *ap, unsigned int device) | |
226 | { | |
227 | iowrite32(ATA_DEVICE_OBS, ap->ioaddr.device_addr); | |
228 | ata_sff_pause(ap); /* needed; also flushes, for mmio */ | |
229 | } | |
230 | ||
231 | static unsigned int sata_rcar_ata_devchk(struct ata_port *ap, | |
232 | unsigned int device) | |
233 | { | |
234 | struct ata_ioports *ioaddr = &ap->ioaddr; | |
235 | u8 nsect, lbal; | |
236 | ||
237 | sata_rcar_dev_select(ap, device); | |
238 | ||
239 | iowrite32(0x55, ioaddr->nsect_addr); | |
240 | iowrite32(0xaa, ioaddr->lbal_addr); | |
241 | ||
242 | iowrite32(0xaa, ioaddr->nsect_addr); | |
243 | iowrite32(0x55, ioaddr->lbal_addr); | |
244 | ||
245 | iowrite32(0x55, ioaddr->nsect_addr); | |
246 | iowrite32(0xaa, ioaddr->lbal_addr); | |
247 | ||
248 | nsect = ioread32(ioaddr->nsect_addr); | |
249 | lbal = ioread32(ioaddr->lbal_addr); | |
250 | ||
251 | if (nsect == 0x55 && lbal == 0xaa) | |
252 | return 1; /* found a device */ | |
253 | ||
254 | return 0; /* nothing found */ | |
255 | } | |
256 | ||
257 | static int sata_rcar_wait_after_reset(struct ata_link *link, | |
258 | unsigned long deadline) | |
259 | { | |
260 | struct ata_port *ap = link->ap; | |
261 | ||
262 | ata_msleep(ap, ATA_WAIT_AFTER_RESET); | |
263 | ||
264 | return ata_sff_wait_ready(link, deadline); | |
265 | } | |
266 | ||
267 | static int sata_rcar_bus_softreset(struct ata_port *ap, unsigned long deadline) | |
268 | { | |
269 | struct ata_ioports *ioaddr = &ap->ioaddr; | |
270 | ||
271 | DPRINTK("ata%u: bus reset via SRST\n", ap->print_id); | |
272 | ||
273 | /* software reset. causes dev0 to be selected */ | |
274 | iowrite32(ap->ctl, ioaddr->ctl_addr); | |
275 | udelay(20); | |
276 | iowrite32(ap->ctl | ATA_SRST, ioaddr->ctl_addr); | |
277 | udelay(20); | |
278 | iowrite32(ap->ctl, ioaddr->ctl_addr); | |
279 | ap->last_ctl = ap->ctl; | |
280 | ||
281 | /* wait the port to become ready */ | |
282 | return sata_rcar_wait_after_reset(&ap->link, deadline); | |
283 | } | |
284 | ||
285 | static int sata_rcar_softreset(struct ata_link *link, unsigned int *classes, | |
286 | unsigned long deadline) | |
287 | { | |
288 | struct ata_port *ap = link->ap; | |
289 | unsigned int devmask = 0; | |
290 | int rc; | |
291 | u8 err; | |
292 | ||
293 | /* determine if device 0 is present */ | |
294 | if (sata_rcar_ata_devchk(ap, 0)) | |
295 | devmask |= 1 << 0; | |
296 | ||
297 | /* issue bus reset */ | |
298 | DPRINTK("about to softreset, devmask=%x\n", devmask); | |
299 | rc = sata_rcar_bus_softreset(ap, deadline); | |
300 | /* if link is occupied, -ENODEV too is an error */ | |
301 | if (rc && (rc != -ENODEV || sata_scr_valid(link))) { | |
302 | ata_link_err(link, "SRST failed (errno=%d)\n", rc); | |
303 | return rc; | |
304 | } | |
305 | ||
306 | /* determine by signature whether we have ATA or ATAPI devices */ | |
307 | classes[0] = ata_sff_dev_classify(&link->device[0], devmask, &err); | |
308 | ||
309 | DPRINTK("classes[0]=%u\n", classes[0]); | |
310 | return 0; | |
311 | } | |
312 | ||
313 | static void sata_rcar_tf_load(struct ata_port *ap, | |
314 | const struct ata_taskfile *tf) | |
315 | { | |
316 | struct ata_ioports *ioaddr = &ap->ioaddr; | |
317 | unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; | |
318 | ||
319 | if (tf->ctl != ap->last_ctl) { | |
320 | iowrite32(tf->ctl, ioaddr->ctl_addr); | |
321 | ap->last_ctl = tf->ctl; | |
322 | ata_wait_idle(ap); | |
323 | } | |
324 | ||
325 | if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { | |
326 | iowrite32(tf->hob_feature, ioaddr->feature_addr); | |
327 | iowrite32(tf->hob_nsect, ioaddr->nsect_addr); | |
328 | iowrite32(tf->hob_lbal, ioaddr->lbal_addr); | |
329 | iowrite32(tf->hob_lbam, ioaddr->lbam_addr); | |
330 | iowrite32(tf->hob_lbah, ioaddr->lbah_addr); | |
331 | VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", | |
332 | tf->hob_feature, | |
333 | tf->hob_nsect, | |
334 | tf->hob_lbal, | |
335 | tf->hob_lbam, | |
336 | tf->hob_lbah); | |
337 | } | |
338 | ||
339 | if (is_addr) { | |
340 | iowrite32(tf->feature, ioaddr->feature_addr); | |
341 | iowrite32(tf->nsect, ioaddr->nsect_addr); | |
342 | iowrite32(tf->lbal, ioaddr->lbal_addr); | |
343 | iowrite32(tf->lbam, ioaddr->lbam_addr); | |
344 | iowrite32(tf->lbah, ioaddr->lbah_addr); | |
345 | VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", | |
346 | tf->feature, | |
347 | tf->nsect, | |
348 | tf->lbal, | |
349 | tf->lbam, | |
350 | tf->lbah); | |
351 | } | |
352 | ||
353 | if (tf->flags & ATA_TFLAG_DEVICE) { | |
354 | iowrite32(tf->device, ioaddr->device_addr); | |
355 | VPRINTK("device 0x%X\n", tf->device); | |
356 | } | |
357 | ||
358 | ata_wait_idle(ap); | |
359 | } | |
360 | ||
361 | static void sata_rcar_tf_read(struct ata_port *ap, struct ata_taskfile *tf) | |
362 | { | |
363 | struct ata_ioports *ioaddr = &ap->ioaddr; | |
364 | ||
365 | tf->command = sata_rcar_check_status(ap); | |
366 | tf->feature = ioread32(ioaddr->error_addr); | |
367 | tf->nsect = ioread32(ioaddr->nsect_addr); | |
368 | tf->lbal = ioread32(ioaddr->lbal_addr); | |
369 | tf->lbam = ioread32(ioaddr->lbam_addr); | |
370 | tf->lbah = ioread32(ioaddr->lbah_addr); | |
371 | tf->device = ioread32(ioaddr->device_addr); | |
372 | ||
373 | if (tf->flags & ATA_TFLAG_LBA48) { | |
374 | iowrite32(tf->ctl | ATA_HOB, ioaddr->ctl_addr); | |
375 | tf->hob_feature = ioread32(ioaddr->error_addr); | |
376 | tf->hob_nsect = ioread32(ioaddr->nsect_addr); | |
377 | tf->hob_lbal = ioread32(ioaddr->lbal_addr); | |
378 | tf->hob_lbam = ioread32(ioaddr->lbam_addr); | |
379 | tf->hob_lbah = ioread32(ioaddr->lbah_addr); | |
380 | iowrite32(tf->ctl, ioaddr->ctl_addr); | |
381 | ap->last_ctl = tf->ctl; | |
382 | } | |
383 | } | |
384 | ||
385 | static void sata_rcar_exec_command(struct ata_port *ap, | |
386 | const struct ata_taskfile *tf) | |
387 | { | |
388 | DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command); | |
389 | ||
390 | iowrite32(tf->command, ap->ioaddr.command_addr); | |
391 | ata_sff_pause(ap); | |
392 | } | |
393 | ||
394 | static unsigned int sata_rcar_data_xfer(struct ata_device *dev, | |
395 | unsigned char *buf, | |
396 | unsigned int buflen, int rw) | |
397 | { | |
398 | struct ata_port *ap = dev->link->ap; | |
399 | void __iomem *data_addr = ap->ioaddr.data_addr; | |
400 | unsigned int words = buflen >> 1; | |
401 | ||
402 | /* Transfer multiple of 2 bytes */ | |
403 | if (rw == READ) | |
404 | sata_rcar_ioread16_rep(data_addr, buf, words); | |
405 | else | |
406 | sata_rcar_iowrite16_rep(data_addr, buf, words); | |
407 | ||
408 | /* Transfer trailing byte, if any. */ | |
409 | if (unlikely(buflen & 0x01)) { | |
410 | unsigned char pad[2] = { }; | |
411 | ||
412 | /* Point buf to the tail of buffer */ | |
413 | buf += buflen - 1; | |
414 | ||
415 | /* | |
416 | * Use io*16_rep() accessors here as well to avoid pointlessly | |
417 | * swapping bytes to and from on the big endian machines... | |
418 | */ | |
419 | if (rw == READ) { | |
420 | sata_rcar_ioread16_rep(data_addr, pad, 1); | |
421 | *buf = pad[0]; | |
422 | } else { | |
423 | pad[0] = *buf; | |
424 | sata_rcar_iowrite16_rep(data_addr, pad, 1); | |
425 | } | |
426 | words++; | |
427 | } | |
428 | ||
429 | return words << 1; | |
430 | } | |
431 | ||
432 | static void sata_rcar_drain_fifo(struct ata_queued_cmd *qc) | |
433 | { | |
434 | int count; | |
435 | struct ata_port *ap; | |
436 | ||
437 | /* We only need to flush incoming data when a command was running */ | |
438 | if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE) | |
439 | return; | |
440 | ||
441 | ap = qc->ap; | |
442 | /* Drain up to 64K of data before we give up this recovery method */ | |
443 | for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ) && | |
444 | count < 65536; count += 2) | |
445 | ioread32(ap->ioaddr.data_addr); | |
446 | ||
447 | /* Can become DEBUG later */ | |
448 | if (count) | |
449 | ata_port_dbg(ap, "drained %d bytes to clear DRQ\n", count); | |
450 | } | |
451 | ||
452 | static int sata_rcar_scr_read(struct ata_link *link, unsigned int sc_reg, | |
453 | u32 *val) | |
454 | { | |
455 | if (sc_reg > SCR_ACTIVE) | |
456 | return -EINVAL; | |
457 | ||
458 | *val = ioread32(link->ap->ioaddr.scr_addr + (sc_reg << 2)); | |
459 | return 0; | |
460 | } | |
461 | ||
462 | static int sata_rcar_scr_write(struct ata_link *link, unsigned int sc_reg, | |
463 | u32 val) | |
464 | { | |
465 | if (sc_reg > SCR_ACTIVE) | |
466 | return -EINVAL; | |
467 | ||
468 | iowrite32(val, link->ap->ioaddr.scr_addr + (sc_reg << 2)); | |
469 | return 0; | |
470 | } | |
471 | ||
472 | static void sata_rcar_bmdma_fill_sg(struct ata_queued_cmd *qc) | |
473 | { | |
474 | struct ata_port *ap = qc->ap; | |
475 | struct ata_bmdma_prd *prd = ap->bmdma_prd; | |
476 | struct scatterlist *sg; | |
333279c8 | 477 | unsigned int si; |
163cf81d | 478 | |
163cf81d | 479 | for_each_sg(qc->sg, sg, qc->n_elem, si) { |
333279c8 | 480 | u32 addr, sg_len; |
163cf81d VB |
481 | |
482 | /* | |
483 | * Note: h/w doesn't support 64-bit, so we unconditionally | |
484 | * truncate dma_addr_t to u32. | |
485 | */ | |
486 | addr = (u32)sg_dma_address(sg); | |
487 | sg_len = sg_dma_len(sg); | |
488 | ||
333279c8 SS |
489 | prd[si].addr = cpu_to_le32(addr); |
490 | prd[si].flags_len = cpu_to_le32(sg_len); | |
491 | VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", si, addr, sg_len); | |
163cf81d VB |
492 | } |
493 | ||
494 | /* end-of-table flag */ | |
333279c8 | 495 | prd[si - 1].addr |= cpu_to_le32(SATA_RCAR_DTEND); |
163cf81d VB |
496 | } |
497 | ||
498 | static void sata_rcar_qc_prep(struct ata_queued_cmd *qc) | |
499 | { | |
500 | if (!(qc->flags & ATA_QCFLAG_DMAMAP)) | |
501 | return; | |
502 | ||
503 | sata_rcar_bmdma_fill_sg(qc); | |
504 | } | |
505 | ||
506 | static void sata_rcar_bmdma_setup(struct ata_queued_cmd *qc) | |
507 | { | |
508 | struct ata_port *ap = qc->ap; | |
509 | unsigned int rw = qc->tf.flags & ATA_TFLAG_WRITE; | |
510 | u32 dmactl; | |
511 | struct sata_rcar_priv *priv = ap->host->private_data; | |
512 | ||
513 | /* load PRD table addr. */ | |
514 | mb(); /* make sure PRD table writes are visible to controller */ | |
515 | iowrite32(ap->bmdma_prd_dma, priv->base + ATAPI_DTB_ADR_REG); | |
516 | ||
517 | /* specify data direction, triple-check start bit is clear */ | |
518 | dmactl = ioread32(priv->base + ATAPI_CONTROL1_REG); | |
519 | dmactl &= ~(ATAPI_CONTROL1_RW | ATAPI_CONTROL1_STOP); | |
520 | if (dmactl & ATAPI_CONTROL1_START) { | |
521 | dmactl &= ~ATAPI_CONTROL1_START; | |
522 | dmactl |= ATAPI_CONTROL1_STOP; | |
523 | } | |
524 | if (!rw) | |
525 | dmactl |= ATAPI_CONTROL1_RW; | |
526 | iowrite32(dmactl, priv->base + ATAPI_CONTROL1_REG); | |
527 | ||
528 | /* issue r/w command */ | |
529 | ap->ops->sff_exec_command(ap, &qc->tf); | |
530 | } | |
531 | ||
532 | static void sata_rcar_bmdma_start(struct ata_queued_cmd *qc) | |
533 | { | |
534 | struct ata_port *ap = qc->ap; | |
535 | u32 dmactl; | |
536 | struct sata_rcar_priv *priv = ap->host->private_data; | |
537 | ||
538 | /* start host DMA transaction */ | |
539 | dmactl = ioread32(priv->base + ATAPI_CONTROL1_REG); | |
540 | dmactl |= ATAPI_CONTROL1_START; | |
541 | iowrite32(dmactl, priv->base + ATAPI_CONTROL1_REG); | |
542 | } | |
543 | ||
544 | static void sata_rcar_bmdma_stop(struct ata_queued_cmd *qc) | |
545 | { | |
546 | struct ata_port *ap = qc->ap; | |
547 | struct sata_rcar_priv *priv = ap->host->private_data; | |
548 | u32 dmactl; | |
549 | ||
550 | /* force termination of DMA transfer if active */ | |
551 | dmactl = ioread32(priv->base + ATAPI_CONTROL1_REG); | |
552 | if (dmactl & ATAPI_CONTROL1_START) { | |
553 | dmactl &= ~ATAPI_CONTROL1_START; | |
554 | dmactl |= ATAPI_CONTROL1_STOP; | |
555 | iowrite32(dmactl, priv->base + ATAPI_CONTROL1_REG); | |
556 | } | |
557 | ||
558 | /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ | |
559 | ata_sff_dma_pause(ap); | |
560 | } | |
561 | ||
562 | static u8 sata_rcar_bmdma_status(struct ata_port *ap) | |
563 | { | |
564 | struct sata_rcar_priv *priv = ap->host->private_data; | |
565 | u32 status; | |
566 | u8 host_stat = 0; | |
567 | ||
568 | status = ioread32(priv->base + ATAPI_STATUS_REG); | |
569 | if (status & ATAPI_STATUS_DEVINT) | |
570 | host_stat |= ATA_DMA_INTR; | |
571 | if (status & ATAPI_STATUS_ACT) | |
572 | host_stat |= ATA_DMA_ACTIVE; | |
573 | ||
574 | return host_stat; | |
575 | } | |
576 | ||
577 | static struct scsi_host_template sata_rcar_sht = { | |
578 | ATA_BMDMA_SHT(DRV_NAME), | |
579 | }; | |
580 | ||
581 | static struct ata_port_operations sata_rcar_port_ops = { | |
582 | .inherits = &ata_bmdma_port_ops, | |
583 | ||
584 | .freeze = sata_rcar_freeze, | |
585 | .thaw = sata_rcar_thaw, | |
586 | .softreset = sata_rcar_softreset, | |
587 | ||
588 | .scr_read = sata_rcar_scr_read, | |
589 | .scr_write = sata_rcar_scr_write, | |
590 | ||
591 | .sff_dev_select = sata_rcar_dev_select, | |
592 | .sff_set_devctl = sata_rcar_set_devctl, | |
593 | .sff_check_status = sata_rcar_check_status, | |
594 | .sff_check_altstatus = sata_rcar_check_altstatus, | |
595 | .sff_tf_load = sata_rcar_tf_load, | |
596 | .sff_tf_read = sata_rcar_tf_read, | |
597 | .sff_exec_command = sata_rcar_exec_command, | |
598 | .sff_data_xfer = sata_rcar_data_xfer, | |
599 | .sff_drain_fifo = sata_rcar_drain_fifo, | |
600 | ||
601 | .qc_prep = sata_rcar_qc_prep, | |
602 | ||
603 | .bmdma_setup = sata_rcar_bmdma_setup, | |
604 | .bmdma_start = sata_rcar_bmdma_start, | |
605 | .bmdma_stop = sata_rcar_bmdma_stop, | |
606 | .bmdma_status = sata_rcar_bmdma_status, | |
607 | }; | |
608 | ||
609 | static int sata_rcar_serr_interrupt(struct ata_port *ap) | |
610 | { | |
611 | struct sata_rcar_priv *priv = ap->host->private_data; | |
612 | struct ata_eh_info *ehi = &ap->link.eh_info; | |
613 | int freeze = 0; | |
614 | int handled = 0; | |
615 | u32 serror; | |
616 | ||
617 | serror = ioread32(priv->base + SCRSERR_REG); | |
618 | if (!serror) | |
619 | return 0; | |
620 | ||
621 | DPRINTK("SError @host_intr: 0x%x\n", serror); | |
622 | ||
623 | /* first, analyze and record host port events */ | |
624 | ata_ehi_clear_desc(ehi); | |
625 | ||
626 | if (serror & (SERR_DEV_XCHG | SERR_PHYRDY_CHG)) { | |
627 | /* Setup a soft-reset EH action */ | |
628 | ata_ehi_hotplugged(ehi); | |
629 | ata_ehi_push_desc(ehi, "%s", "hotplug"); | |
630 | ||
631 | freeze = serror & SERR_COMM_WAKE ? 0 : 1; | |
632 | handled = 1; | |
633 | } | |
634 | ||
635 | /* freeze or abort */ | |
636 | if (freeze) | |
637 | ata_port_freeze(ap); | |
638 | else | |
639 | ata_port_abort(ap); | |
640 | ||
641 | return handled; | |
642 | } | |
643 | ||
644 | static int sata_rcar_ata_interrupt(struct ata_port *ap) | |
645 | { | |
646 | struct ata_queued_cmd *qc; | |
647 | int handled = 0; | |
648 | ||
649 | qc = ata_qc_from_tag(ap, ap->link.active_tag); | |
650 | if (qc) | |
651 | handled |= ata_bmdma_port_intr(ap, qc); | |
652 | ||
653 | return handled; | |
654 | } | |
655 | ||
656 | static irqreturn_t sata_rcar_interrupt(int irq, void *dev_instance) | |
657 | { | |
658 | struct ata_host *host = dev_instance; | |
659 | struct sata_rcar_priv *priv = host->private_data; | |
660 | struct ata_port *ap; | |
661 | unsigned int handled = 0; | |
662 | u32 sataintstat; | |
663 | unsigned long flags; | |
664 | ||
665 | spin_lock_irqsave(&host->lock, flags); | |
666 | ||
667 | sataintstat = ioread32(priv->base + SATAINTSTAT_REG); | |
668 | if (!sataintstat) | |
669 | goto done; | |
670 | /* ack */ | |
671 | iowrite32(sataintstat & ~SATA_RCAR_INT_MASK, | |
672 | priv->base + SATAINTSTAT_REG); | |
673 | ||
674 | ap = host->ports[0]; | |
675 | ||
676 | if (sataintstat & SATAINTSTAT_ATA) | |
677 | handled |= sata_rcar_ata_interrupt(ap); | |
678 | ||
679 | if (sataintstat & SATAINTSTAT_SERR) | |
680 | handled |= sata_rcar_serr_interrupt(ap); | |
681 | ||
682 | done: | |
683 | spin_unlock_irqrestore(&host->lock, flags); | |
684 | ||
685 | return IRQ_RETVAL(handled); | |
686 | } | |
687 | ||
688 | static void sata_rcar_setup_port(struct ata_host *host) | |
689 | { | |
690 | struct ata_port *ap = host->ports[0]; | |
691 | struct ata_ioports *ioaddr = &ap->ioaddr; | |
692 | struct sata_rcar_priv *priv = host->private_data; | |
693 | ||
694 | ap->ops = &sata_rcar_port_ops; | |
695 | ap->pio_mask = ATA_PIO4; | |
696 | ap->udma_mask = ATA_UDMA6; | |
697 | ap->flags |= ATA_FLAG_SATA; | |
698 | ||
699 | ioaddr->cmd_addr = priv->base + SDATA_REG; | |
700 | ioaddr->ctl_addr = priv->base + SSDEVCON_REG; | |
701 | ioaddr->scr_addr = priv->base + SCRSSTS_REG; | |
702 | ioaddr->altstatus_addr = ioaddr->ctl_addr; | |
703 | ||
704 | ioaddr->data_addr = ioaddr->cmd_addr + (ATA_REG_DATA << 2); | |
705 | ioaddr->error_addr = ioaddr->cmd_addr + (ATA_REG_ERR << 2); | |
706 | ioaddr->feature_addr = ioaddr->cmd_addr + (ATA_REG_FEATURE << 2); | |
707 | ioaddr->nsect_addr = ioaddr->cmd_addr + (ATA_REG_NSECT << 2); | |
708 | ioaddr->lbal_addr = ioaddr->cmd_addr + (ATA_REG_LBAL << 2); | |
709 | ioaddr->lbam_addr = ioaddr->cmd_addr + (ATA_REG_LBAM << 2); | |
710 | ioaddr->lbah_addr = ioaddr->cmd_addr + (ATA_REG_LBAH << 2); | |
711 | ioaddr->device_addr = ioaddr->cmd_addr + (ATA_REG_DEVICE << 2); | |
712 | ioaddr->status_addr = ioaddr->cmd_addr + (ATA_REG_STATUS << 2); | |
713 | ioaddr->command_addr = ioaddr->cmd_addr + (ATA_REG_CMD << 2); | |
714 | } | |
715 | ||
716 | static void sata_rcar_init_controller(struct ata_host *host) | |
717 | { | |
718 | struct sata_rcar_priv *priv = host->private_data; | |
719 | u32 val; | |
720 | ||
721 | /* reset and setup phy */ | |
722 | sata_rcar_phy_initialize(priv); | |
723 | sata_rcar_phy_write(priv, SATAPCTLR1_REG, 0x00200188, 0); | |
724 | sata_rcar_phy_write(priv, SATAPCTLR1_REG, 0x00200188, 1); | |
725 | sata_rcar_phy_write(priv, SATAPCTLR3_REG, 0x0000A061, 0); | |
726 | sata_rcar_phy_write(priv, SATAPCTLR2_REG, 0x20000000, 0); | |
727 | sata_rcar_phy_write(priv, SATAPCTLR2_REG, 0x20000000, 1); | |
728 | sata_rcar_phy_write(priv, SATAPCTLR4_REG, 0x28E80000, 0); | |
729 | ||
730 | /* SATA-IP reset state */ | |
731 | val = ioread32(priv->base + ATAPI_CONTROL1_REG); | |
732 | val |= ATAPI_CONTROL1_RESET; | |
733 | iowrite32(val, priv->base + ATAPI_CONTROL1_REG); | |
734 | ||
735 | /* ISM mode, PRD mode, DTEND flag at bit 0 */ | |
736 | val = ioread32(priv->base + ATAPI_CONTROL1_REG); | |
737 | val |= ATAPI_CONTROL1_ISM; | |
738 | val |= ATAPI_CONTROL1_DESE; | |
739 | val |= ATAPI_CONTROL1_DTA32M; | |
740 | iowrite32(val, priv->base + ATAPI_CONTROL1_REG); | |
741 | ||
742 | /* Release the SATA-IP from the reset state */ | |
743 | val = ioread32(priv->base + ATAPI_CONTROL1_REG); | |
744 | val &= ~ATAPI_CONTROL1_RESET; | |
745 | iowrite32(val, priv->base + ATAPI_CONTROL1_REG); | |
746 | ||
747 | /* ack and mask */ | |
748 | iowrite32(0, priv->base + SATAINTSTAT_REG); | |
749 | iowrite32(0x7ff, priv->base + SATAINTMASK_REG); | |
750 | /* enable interrupts */ | |
751 | iowrite32(ATAPI_INT_ENABLE_SATAINT, priv->base + ATAPI_INT_ENABLE_REG); | |
752 | } | |
753 | ||
754 | static int sata_rcar_probe(struct platform_device *pdev) | |
755 | { | |
756 | struct ata_host *host; | |
757 | struct sata_rcar_priv *priv; | |
758 | struct resource *mem; | |
759 | int irq; | |
760 | int ret = 0; | |
761 | ||
762 | mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
763 | if (mem == NULL) | |
764 | return -EINVAL; | |
765 | ||
766 | irq = platform_get_irq(pdev, 0); | |
767 | if (irq <= 0) | |
768 | return -EINVAL; | |
769 | ||
770 | priv = devm_kzalloc(&pdev->dev, sizeof(struct sata_rcar_priv), | |
771 | GFP_KERNEL); | |
772 | if (!priv) | |
773 | return -ENOMEM; | |
774 | ||
775 | priv->clk = devm_clk_get(&pdev->dev, NULL); | |
776 | if (IS_ERR(priv->clk)) { | |
777 | dev_err(&pdev->dev, "failed to get access to sata clock\n"); | |
778 | return PTR_ERR(priv->clk); | |
779 | } | |
780 | clk_enable(priv->clk); | |
781 | ||
782 | host = ata_host_alloc(&pdev->dev, 1); | |
783 | if (!host) { | |
784 | dev_err(&pdev->dev, "ata_host_alloc failed\n"); | |
785 | ret = -ENOMEM; | |
786 | goto cleanup; | |
787 | } | |
788 | ||
789 | host->private_data = priv; | |
790 | ||
2de1d5e1 SK |
791 | priv->base = devm_ioremap_resource(&pdev->dev, mem); |
792 | if (IS_ERR(priv->base)) { | |
793 | ret = PTR_ERR(priv->base); | |
163cf81d VB |
794 | goto cleanup; |
795 | } | |
796 | ||
797 | /* setup port */ | |
798 | sata_rcar_setup_port(host); | |
799 | ||
800 | /* initialize host controller */ | |
801 | sata_rcar_init_controller(host); | |
802 | ||
803 | ret = ata_host_activate(host, irq, sata_rcar_interrupt, 0, | |
804 | &sata_rcar_sht); | |
805 | if (!ret) | |
806 | return 0; | |
807 | ||
808 | cleanup: | |
809 | clk_disable(priv->clk); | |
810 | ||
811 | return ret; | |
812 | } | |
813 | ||
814 | static int sata_rcar_remove(struct platform_device *pdev) | |
815 | { | |
d89995db | 816 | struct ata_host *host = platform_get_drvdata(pdev); |
163cf81d VB |
817 | struct sata_rcar_priv *priv = host->private_data; |
818 | ||
819 | ata_host_detach(host); | |
820 | ||
821 | /* disable interrupts */ | |
822 | iowrite32(0, priv->base + ATAPI_INT_ENABLE_REG); | |
823 | /* ack and mask */ | |
824 | iowrite32(0, priv->base + SATAINTSTAT_REG); | |
825 | iowrite32(0x7ff, priv->base + SATAINTMASK_REG); | |
826 | ||
827 | clk_disable(priv->clk); | |
828 | ||
829 | return 0; | |
830 | } | |
831 | ||
832 | #ifdef CONFIG_PM | |
833 | static int sata_rcar_suspend(struct device *dev) | |
834 | { | |
835 | struct ata_host *host = dev_get_drvdata(dev); | |
836 | struct sata_rcar_priv *priv = host->private_data; | |
837 | int ret; | |
838 | ||
839 | ret = ata_host_suspend(host, PMSG_SUSPEND); | |
840 | if (!ret) { | |
841 | /* disable interrupts */ | |
842 | iowrite32(0, priv->base + ATAPI_INT_ENABLE_REG); | |
843 | /* mask */ | |
844 | iowrite32(0x7ff, priv->base + SATAINTMASK_REG); | |
845 | ||
846 | clk_disable(priv->clk); | |
847 | } | |
848 | ||
849 | return ret; | |
850 | } | |
851 | ||
852 | static int sata_rcar_resume(struct device *dev) | |
853 | { | |
854 | struct ata_host *host = dev_get_drvdata(dev); | |
855 | struct sata_rcar_priv *priv = host->private_data; | |
856 | ||
857 | clk_enable(priv->clk); | |
858 | ||
859 | /* ack and mask */ | |
860 | iowrite32(0, priv->base + SATAINTSTAT_REG); | |
861 | iowrite32(0x7ff, priv->base + SATAINTMASK_REG); | |
862 | /* enable interrupts */ | |
863 | iowrite32(ATAPI_INT_ENABLE_SATAINT, priv->base + ATAPI_INT_ENABLE_REG); | |
864 | ||
865 | ata_host_resume(host); | |
866 | ||
867 | return 0; | |
868 | } | |
869 | ||
870 | static const struct dev_pm_ops sata_rcar_pm_ops = { | |
871 | .suspend = sata_rcar_suspend, | |
872 | .resume = sata_rcar_resume, | |
873 | }; | |
874 | #endif | |
875 | ||
876 | static struct of_device_id sata_rcar_match[] = { | |
877 | { .compatible = "renesas,rcar-sata", }, | |
878 | {}, | |
879 | }; | |
880 | MODULE_DEVICE_TABLE(of, sata_rcar_match); | |
881 | ||
882 | static struct platform_driver sata_rcar_driver = { | |
883 | .probe = sata_rcar_probe, | |
884 | .remove = sata_rcar_remove, | |
885 | .driver = { | |
886 | .name = DRV_NAME, | |
887 | .owner = THIS_MODULE, | |
888 | .of_match_table = sata_rcar_match, | |
889 | #ifdef CONFIG_PM | |
890 | .pm = &sata_rcar_pm_ops, | |
891 | #endif | |
892 | }, | |
893 | }; | |
894 | ||
895 | module_platform_driver(sata_rcar_driver); | |
896 | ||
897 | MODULE_LICENSE("GPL"); | |
898 | MODULE_AUTHOR("Vladimir Barinov"); | |
899 | MODULE_DESCRIPTION("Renesas R-Car SATA controller low level driver"); |