]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* lanai.c -- Copyright 1999-2003 by Mitchell Blank Jr <mitch@sfgoth.com> |
2 | * | |
3 | * This program is free software; you can redistribute it and/or | |
4 | * modify it under the terms of the GNU General Public License | |
5 | * as published by the Free Software Foundation; either version | |
6 | * 2 of the License, or (at your option) any later version. | |
7 | * | |
8 | * This driver supports ATM cards based on the Efficient "Lanai" | |
9 | * chipset such as the Speedstream 3010 and the ENI-25p. The | |
10 | * Speedstream 3060 is currently not supported since we don't | |
11 | * have the code to drive the on-board Alcatel DSL chipset (yet). | |
12 | * | |
13 | * Thanks to Efficient for supporting this project with hardware, | |
14 | * documentation, and by answering my questions. | |
15 | * | |
16 | * Things not working yet: | |
17 | * | |
18 | * o We don't support the Speedstream 3060 yet - this card has | |
19 | * an on-board DSL modem chip by Alcatel and the driver will | |
20 | * need some extra code added to handle it | |
21 | * | |
22 | * o Note that due to limitations of the Lanai only one VCC can be | |
23 | * in CBR at once | |
24 | * | |
25 | * o We don't currently parse the EEPROM at all. The code is all | |
26 | * there as per the spec, but it doesn't actually work. I think | |
27 | * there may be some issues with the docs. Anyway, do NOT | |
28 | * enable it yet - bugs in that code may actually damage your | |
29 | * hardware! Because of this you should hardware an ESI before | |
30 | * trying to use this in a LANE or MPOA environment. | |
31 | * | |
32 | * o AAL0 is stubbed in but the actual rx/tx path isn't written yet: | |
33 | * vcc_tx_aal0() needs to send or queue a SKB | |
34 | * vcc_tx_unqueue_aal0() needs to attempt to send queued SKBs | |
35 | * vcc_rx_aal0() needs to handle AAL0 interrupts | |
36 | * This isn't too much work - I just wanted to get other things | |
37 | * done first. | |
38 | * | |
39 | * o lanai_change_qos() isn't written yet | |
40 | * | |
41 | * o There aren't any ioctl's yet -- I'd like to eventually support | |
49693280 | 42 | * setting loopback and LED modes that way. |
1da177e4 LT |
43 | * |
44 | * o If the segmentation engine or DMA gets shut down we should restart | |
45 | * card as per section 17.0i. (see lanai_reset) | |
46 | * | |
47 | * o setsockopt(SO_CIRANGE) isn't done (although despite what the | |
48 | * API says it isn't exactly commonly implemented) | |
49 | */ | |
50 | ||
51 | /* Version history: | |
52 | * v.1.00 -- 26-JUL-2003 -- PCI/DMA updates | |
53 | * v.0.02 -- 11-JAN-2000 -- Endian fixes | |
54 | * v.0.01 -- 30-NOV-1999 -- Initial release | |
55 | */ | |
56 | ||
57 | #include <linux/module.h> | |
58 | #include <linux/mm.h> | |
59 | #include <linux/atmdev.h> | |
60 | #include <asm/io.h> | |
61 | #include <asm/byteorder.h> | |
62 | #include <linux/spinlock.h> | |
63 | #include <linux/pci.h> | |
64 | #include <linux/dma-mapping.h> | |
65 | #include <linux/init.h> | |
66 | #include <linux/delay.h> | |
67 | #include <linux/interrupt.h> | |
68 | #include <linux/dma-mapping.h> | |
69 | ||
70 | /* -------------------- TUNABLE PARAMATERS: */ | |
71 | ||
72 | /* | |
73 | * Maximum number of VCIs per card. Setting it lower could theoretically | |
74 | * save some memory, but since we allocate our vcc list with get_free_pages, | |
75 | * it's not really likely for most architectures | |
76 | */ | |
77 | #define NUM_VCI (1024) | |
78 | ||
79 | /* | |
80 | * Enable extra debugging | |
81 | */ | |
82 | #define DEBUG | |
83 | /* | |
84 | * Debug _all_ register operations with card, except the memory test. | |
85 | * Also disables the timed poll to prevent extra chattiness. This | |
86 | * isn't for normal use | |
87 | */ | |
88 | #undef DEBUG_RW | |
89 | ||
90 | /* | |
91 | * The programming guide specifies a full test of the on-board SRAM | |
92 | * at initialization time. Undefine to remove this | |
93 | */ | |
94 | #define FULL_MEMORY_TEST | |
95 | ||
96 | /* | |
97 | * This is the number of (4 byte) service entries that we will | |
98 | * try to allocate at startup. Note that we will end up with | |
99 | * one PAGE_SIZE's worth regardless of what this is set to | |
100 | */ | |
101 | #define SERVICE_ENTRIES (1024) | |
102 | /* TODO: make above a module load-time option */ | |
103 | ||
104 | /* | |
105 | * We normally read the onboard EEPROM in order to discover our MAC | |
106 | * address. Undefine to _not_ do this | |
107 | */ | |
108 | /* #define READ_EEPROM */ /* ***DONT ENABLE YET*** */ | |
109 | /* TODO: make above a module load-time option (also) */ | |
110 | ||
111 | /* | |
112 | * Depth of TX fifo (in 128 byte units; range 2-31) | |
113 | * Smaller numbers are better for network latency | |
114 | * Larger numbers are better for PCI latency | |
115 | * I'm really sure where the best tradeoff is, but the BSD driver uses | |
116 | * 7 and it seems to work ok. | |
117 | */ | |
118 | #define TX_FIFO_DEPTH (7) | |
119 | /* TODO: make above a module load-time option */ | |
120 | ||
121 | /* | |
122 | * How often (in jiffies) we will try to unstick stuck connections - | |
123 | * shouldn't need to happen much | |
124 | */ | |
125 | #define LANAI_POLL_PERIOD (10*HZ) | |
126 | /* TODO: make above a module load-time option */ | |
127 | ||
128 | /* | |
129 | * When allocating an AAL5 receiving buffer, try to make it at least | |
130 | * large enough to hold this many max_sdu sized PDUs | |
131 | */ | |
132 | #define AAL5_RX_MULTIPLIER (3) | |
133 | /* TODO: make above a module load-time option */ | |
134 | ||
135 | /* | |
136 | * Same for transmitting buffer | |
137 | */ | |
138 | #define AAL5_TX_MULTIPLIER (3) | |
139 | /* TODO: make above a module load-time option */ | |
140 | ||
141 | /* | |
142 | * When allocating an AAL0 transmiting buffer, how many cells should fit. | |
143 | * Remember we'll end up with a PAGE_SIZE of them anyway, so this isn't | |
144 | * really critical | |
145 | */ | |
146 | #define AAL0_TX_MULTIPLIER (40) | |
147 | /* TODO: make above a module load-time option */ | |
148 | ||
149 | /* | |
150 | * How large should we make the AAL0 receiving buffer. Remember that this | |
151 | * is shared between all AAL0 VC's | |
152 | */ | |
153 | #define AAL0_RX_BUFFER_SIZE (PAGE_SIZE) | |
154 | /* TODO: make above a module load-time option */ | |
155 | ||
156 | /* | |
157 | * Should we use Lanai's "powerdown" feature when no vcc's are bound? | |
158 | */ | |
159 | /* #define USE_POWERDOWN */ | |
160 | /* TODO: make above a module load-time option (also) */ | |
161 | ||
162 | /* -------------------- DEBUGGING AIDS: */ | |
163 | ||
164 | #define DEV_LABEL "lanai" | |
165 | ||
166 | #ifdef DEBUG | |
167 | ||
168 | #define DPRINTK(format, args...) \ | |
169 | printk(KERN_DEBUG DEV_LABEL ": " format, ##args) | |
170 | #define APRINTK(truth, format, args...) \ | |
171 | do { \ | |
172 | if (unlikely(!(truth))) \ | |
173 | printk(KERN_ERR DEV_LABEL ": " format, ##args); \ | |
174 | } while (0) | |
175 | ||
176 | #else /* !DEBUG */ | |
177 | ||
178 | #define DPRINTK(format, args...) | |
179 | #define APRINTK(truth, format, args...) | |
180 | ||
181 | #endif /* DEBUG */ | |
182 | ||
183 | #ifdef DEBUG_RW | |
184 | #define RWDEBUG(format, args...) \ | |
185 | printk(KERN_DEBUG DEV_LABEL ": " format, ##args) | |
186 | #else /* !DEBUG_RW */ | |
187 | #define RWDEBUG(format, args...) | |
188 | #endif | |
189 | ||
190 | /* -------------------- DATA DEFINITIONS: */ | |
191 | ||
192 | #define LANAI_MAPPING_SIZE (0x40000) | |
193 | #define LANAI_EEPROM_SIZE (128) | |
194 | ||
195 | typedef int vci_t; | |
196 | typedef void __iomem *bus_addr_t; | |
197 | ||
198 | /* DMA buffer in host memory for TX, RX, or service list. */ | |
199 | struct lanai_buffer { | |
200 | u32 *start; /* From get_free_pages */ | |
201 | u32 *end; /* One past last byte */ | |
202 | u32 *ptr; /* Pointer to current host location */ | |
203 | dma_addr_t dmaaddr; | |
204 | }; | |
205 | ||
206 | struct lanai_vcc_stats { | |
207 | unsigned rx_nomem; | |
208 | union { | |
209 | struct { | |
210 | unsigned rx_badlen; | |
211 | unsigned service_trash; | |
212 | unsigned service_stream; | |
213 | unsigned service_rxcrc; | |
214 | } aal5; | |
215 | struct { | |
216 | } aal0; | |
217 | } x; | |
218 | }; | |
219 | ||
220 | struct lanai_dev; /* Forward declaration */ | |
221 | ||
222 | /* | |
223 | * This is the card-specific per-vcc data. Note that unlike some other | |
224 | * drivers there is NOT a 1-to-1 correspondance between these and | |
225 | * atm_vcc's - each one of these represents an actual 2-way vcc, but | |
226 | * an atm_vcc can be 1-way and share with a 1-way vcc in the other | |
227 | * direction. To make it weirder, there can even be 0-way vccs | |
228 | * bound to us, waiting to do a change_qos | |
229 | */ | |
230 | struct lanai_vcc { | |
231 | bus_addr_t vbase; /* Base of VCC's registers */ | |
232 | struct lanai_vcc_stats stats; | |
233 | int nref; /* # of atm_vcc's who reference us */ | |
234 | vci_t vci; | |
235 | struct { | |
236 | struct lanai_buffer buf; | |
237 | struct atm_vcc *atmvcc; /* atm_vcc who is receiver */ | |
238 | } rx; | |
239 | struct { | |
240 | struct lanai_buffer buf; | |
241 | struct atm_vcc *atmvcc; /* atm_vcc who is transmitter */ | |
242 | int endptr; /* last endptr from service entry */ | |
243 | struct sk_buff_head backlog; | |
244 | void (*unqueue)(struct lanai_dev *, struct lanai_vcc *, int); | |
245 | } tx; | |
246 | }; | |
247 | ||
248 | enum lanai_type { | |
1d0ed384 JS |
249 | lanai2 = PCI_DEVICE_ID_EF_ATM_LANAI2, |
250 | lanaihb = PCI_DEVICE_ID_EF_ATM_LANAIHB | |
1da177e4 LT |
251 | }; |
252 | ||
253 | struct lanai_dev_stats { | |
254 | unsigned ovfl_trash; /* # of cells dropped - buffer overflow */ | |
255 | unsigned vci_trash; /* # of cells dropped - closed vci */ | |
256 | unsigned hec_err; /* # of cells dropped - bad HEC */ | |
257 | unsigned atm_ovfl; /* # of cells dropped - rx fifo overflow */ | |
258 | unsigned pcierr_parity_detect; | |
259 | unsigned pcierr_serr_set; | |
260 | unsigned pcierr_master_abort; | |
261 | unsigned pcierr_m_target_abort; | |
262 | unsigned pcierr_s_target_abort; | |
263 | unsigned pcierr_master_parity; | |
264 | unsigned service_notx; | |
265 | unsigned service_norx; | |
266 | unsigned service_rxnotaal5; | |
267 | unsigned dma_reenable; | |
268 | unsigned card_reset; | |
269 | }; | |
270 | ||
271 | struct lanai_dev { | |
272 | bus_addr_t base; | |
273 | struct lanai_dev_stats stats; | |
274 | struct lanai_buffer service; | |
275 | struct lanai_vcc **vccs; | |
276 | #ifdef USE_POWERDOWN | |
277 | int nbound; /* number of bound vccs */ | |
278 | #endif | |
279 | enum lanai_type type; | |
280 | vci_t num_vci; /* Currently just NUM_VCI */ | |
281 | u8 eeprom[LANAI_EEPROM_SIZE]; | |
282 | u32 serialno, magicno; | |
283 | struct pci_dev *pci; | |
284 | DECLARE_BITMAP(backlog_vccs, NUM_VCI); /* VCCs with tx backlog */ | |
285 | DECLARE_BITMAP(transmit_ready, NUM_VCI); /* VCCs with transmit space */ | |
286 | struct timer_list timer; | |
287 | int naal0; | |
288 | struct lanai_buffer aal0buf; /* AAL0 RX buffers */ | |
289 | u32 conf1, conf2; /* CONFIG[12] registers */ | |
290 | u32 status; /* STATUS register */ | |
291 | spinlock_t endtxlock; | |
292 | spinlock_t servicelock; | |
293 | struct atm_vcc *cbrvcc; | |
294 | int number; | |
295 | int board_rev; | |
1da177e4 LT |
296 | /* TODO - look at race conditions with maintence of conf1/conf2 */ |
297 | /* TODO - transmit locking: should we use _irq not _irqsave? */ | |
298 | /* TODO - organize above in some rational fashion (see <asm/cache.h>) */ | |
299 | }; | |
300 | ||
301 | /* | |
302 | * Each device has two bitmaps for each VCC (baclog_vccs and transmit_ready) | |
303 | * This function iterates one of these, calling a given function for each | |
304 | * vci with their bit set | |
305 | */ | |
306 | static void vci_bitfield_iterate(struct lanai_dev *lanai, | |
c22c28f6 | 307 | const unsigned long *lp, |
1da177e4 LT |
308 | void (*func)(struct lanai_dev *,vci_t vci)) |
309 | { | |
310 | vci_t vci = find_first_bit(lp, NUM_VCI); | |
311 | while (vci < NUM_VCI) { | |
312 | func(lanai, vci); | |
313 | vci = find_next_bit(lp, NUM_VCI, vci + 1); | |
314 | } | |
315 | } | |
316 | ||
317 | /* -------------------- BUFFER UTILITIES: */ | |
318 | ||
319 | /* | |
320 | * Lanai needs DMA buffers aligned to 256 bytes of at least 1024 bytes - | |
321 | * usually any page allocation will do. Just to be safe in case | |
322 | * PAGE_SIZE is insanely tiny, though... | |
323 | */ | |
324 | #define LANAI_PAGE_SIZE ((PAGE_SIZE >= 1024) ? PAGE_SIZE : 1024) | |
325 | ||
326 | /* | |
327 | * Allocate a buffer in host RAM for service list, RX, or TX | |
328 | * Returns buf->start==NULL if no memory | |
329 | * Note that the size will be rounded up 2^n bytes, and | |
330 | * if we can't allocate that we'll settle for something smaller | |
331 | * until minbytes | |
332 | */ | |
333 | static void lanai_buf_allocate(struct lanai_buffer *buf, | |
334 | size_t bytes, size_t minbytes, struct pci_dev *pci) | |
335 | { | |
336 | int size; | |
337 | ||
338 | if (bytes > (128 * 1024)) /* max lanai buffer size */ | |
339 | bytes = 128 * 1024; | |
340 | for (size = LANAI_PAGE_SIZE; size < bytes; size *= 2) | |
341 | ; | |
342 | if (minbytes < LANAI_PAGE_SIZE) | |
343 | minbytes = LANAI_PAGE_SIZE; | |
344 | do { | |
345 | /* | |
346 | * Technically we could use non-consistent mappings for | |
347 | * everything, but the way the lanai uses DMA memory would | |
348 | * make that a terrific pain. This is much simpler. | |
349 | */ | |
350 | buf->start = pci_alloc_consistent(pci, size, &buf->dmaaddr); | |
351 | if (buf->start != NULL) { /* Success */ | |
352 | /* Lanai requires 256-byte alignment of DMA bufs */ | |
353 | APRINTK((buf->dmaaddr & ~0xFFFFFF00) == 0, | |
354 | "bad dmaaddr: 0x%lx\n", | |
355 | (unsigned long) buf->dmaaddr); | |
356 | buf->ptr = buf->start; | |
357 | buf->end = (u32 *) | |
358 | (&((unsigned char *) buf->start)[size]); | |
359 | memset(buf->start, 0, size); | |
360 | break; | |
361 | } | |
362 | size /= 2; | |
363 | } while (size >= minbytes); | |
364 | } | |
365 | ||
366 | /* size of buffer in bytes */ | |
367 | static inline size_t lanai_buf_size(const struct lanai_buffer *buf) | |
368 | { | |
369 | return ((unsigned long) buf->end) - ((unsigned long) buf->start); | |
370 | } | |
371 | ||
372 | static void lanai_buf_deallocate(struct lanai_buffer *buf, | |
373 | struct pci_dev *pci) | |
374 | { | |
375 | if (buf->start != NULL) { | |
376 | pci_free_consistent(pci, lanai_buf_size(buf), | |
377 | buf->start, buf->dmaaddr); | |
378 | buf->start = buf->end = buf->ptr = NULL; | |
379 | } | |
380 | } | |
381 | ||
382 | /* size of buffer as "card order" (0=1k .. 7=128k) */ | |
383 | static int lanai_buf_size_cardorder(const struct lanai_buffer *buf) | |
384 | { | |
385 | int order = get_order(lanai_buf_size(buf)) + (PAGE_SHIFT - 10); | |
386 | ||
387 | /* This can only happen if PAGE_SIZE is gigantic, but just in case */ | |
388 | if (order > 7) | |
389 | order = 7; | |
390 | return order; | |
391 | } | |
392 | ||
393 | /* -------------------- PORT I/O UTILITIES: */ | |
394 | ||
395 | /* Registers (and their bit-fields) */ | |
396 | enum lanai_register { | |
397 | Reset_Reg = 0x00, /* Reset; read for chip type; bits: */ | |
398 | #define RESET_GET_BOARD_REV(x) (((x)>> 0)&0x03) /* Board revision */ | |
399 | #define RESET_GET_BOARD_ID(x) (((x)>> 2)&0x03) /* Board ID */ | |
400 | #define BOARD_ID_LANAI256 (0) /* 25.6M adapter card */ | |
401 | Endian_Reg = 0x04, /* Endian setting */ | |
402 | IntStatus_Reg = 0x08, /* Interrupt status */ | |
403 | IntStatusMasked_Reg = 0x0C, /* Interrupt status (masked) */ | |
404 | IntAck_Reg = 0x10, /* Interrupt acknowledge */ | |
405 | IntAckMasked_Reg = 0x14, /* Interrupt acknowledge (masked) */ | |
406 | IntStatusSet_Reg = 0x18, /* Get status + enable/disable */ | |
407 | IntStatusSetMasked_Reg = 0x1C, /* Get status + en/di (masked) */ | |
408 | IntControlEna_Reg = 0x20, /* Interrupt control enable */ | |
409 | IntControlDis_Reg = 0x24, /* Interrupt control disable */ | |
410 | Status_Reg = 0x28, /* Status */ | |
411 | #define STATUS_PROMDATA (0x00000001) /* PROM_DATA pin */ | |
412 | #define STATUS_WAITING (0x00000002) /* Interrupt being delayed */ | |
413 | #define STATUS_SOOL (0x00000004) /* SOOL alarm */ | |
414 | #define STATUS_LOCD (0x00000008) /* LOCD alarm */ | |
415 | #define STATUS_LED (0x00000010) /* LED (HAPPI) output */ | |
416 | #define STATUS_GPIN (0x00000020) /* GPIN pin */ | |
417 | #define STATUS_BUTTBUSY (0x00000040) /* Butt register is pending */ | |
418 | Config1_Reg = 0x2C, /* Config word 1; bits: */ | |
419 | #define CONFIG1_PROMDATA (0x00000001) /* PROM_DATA pin */ | |
420 | #define CONFIG1_PROMCLK (0x00000002) /* PROM_CLK pin */ | |
421 | #define CONFIG1_SET_READMODE(x) ((x)*0x004) /* PCI BM reads; values: */ | |
422 | #define READMODE_PLAIN (0) /* Plain memory read */ | |
423 | #define READMODE_LINE (2) /* Memory read line */ | |
424 | #define READMODE_MULTIPLE (3) /* Memory read multiple */ | |
425 | #define CONFIG1_DMA_ENABLE (0x00000010) /* Turn on DMA */ | |
426 | #define CONFIG1_POWERDOWN (0x00000020) /* Turn off clocks */ | |
427 | #define CONFIG1_SET_LOOPMODE(x) ((x)*0x080) /* Clock&loop mode; values: */ | |
428 | #define LOOPMODE_NORMAL (0) /* Normal - no loop */ | |
429 | #define LOOPMODE_TIME (1) | |
430 | #define LOOPMODE_DIAG (2) | |
431 | #define LOOPMODE_LINE (3) | |
432 | #define CONFIG1_MASK_LOOPMODE (0x00000180) | |
433 | #define CONFIG1_SET_LEDMODE(x) ((x)*0x0200) /* Mode of LED; values: */ | |
434 | #define LEDMODE_NOT_SOOL (0) /* !SOOL */ | |
435 | #define LEDMODE_OFF (1) /* 0 */ | |
436 | #define LEDMODE_ON (2) /* 1 */ | |
437 | #define LEDMODE_NOT_LOCD (3) /* !LOCD */ | |
438 | #define LEDMORE_GPIN (4) /* GPIN */ | |
439 | #define LEDMODE_NOT_GPIN (7) /* !GPIN */ | |
440 | #define CONFIG1_MASK_LEDMODE (0x00000E00) | |
441 | #define CONFIG1_GPOUT1 (0x00001000) /* Toggle for reset */ | |
442 | #define CONFIG1_GPOUT2 (0x00002000) /* Loopback PHY */ | |
443 | #define CONFIG1_GPOUT3 (0x00004000) /* Loopback lanai */ | |
444 | Config2_Reg = 0x30, /* Config word 2; bits: */ | |
445 | #define CONFIG2_HOWMANY (0x00000001) /* >512 VCIs? */ | |
446 | #define CONFIG2_PTI7_MODE (0x00000002) /* Make PTI=7 RM, not OAM */ | |
447 | #define CONFIG2_VPI_CHK_DIS (0x00000004) /* Ignore RX VPI value */ | |
448 | #define CONFIG2_HEC_DROP (0x00000008) /* Drop cells w/ HEC errors */ | |
449 | #define CONFIG2_VCI0_NORMAL (0x00000010) /* Treat VCI=0 normally */ | |
450 | #define CONFIG2_CBR_ENABLE (0x00000020) /* Deal with CBR traffic */ | |
451 | #define CONFIG2_TRASH_ALL (0x00000040) /* Trashing incoming cells */ | |
452 | #define CONFIG2_TX_DISABLE (0x00000080) /* Trashing outgoing cells */ | |
453 | #define CONFIG2_SET_TRASH (0x00000100) /* Turn trashing on */ | |
454 | Statistics_Reg = 0x34, /* Statistics; bits: */ | |
455 | #define STATS_GET_FIFO_OVFL(x) (((x)>> 0)&0xFF) /* FIFO overflowed */ | |
456 | #define STATS_GET_HEC_ERR(x) (((x)>> 8)&0xFF) /* HEC was bad */ | |
457 | #define STATS_GET_BAD_VCI(x) (((x)>>16)&0xFF) /* VCI not open */ | |
458 | #define STATS_GET_BUF_OVFL(x) (((x)>>24)&0xFF) /* VCC buffer full */ | |
459 | ServiceStuff_Reg = 0x38, /* Service stuff; bits: */ | |
460 | #define SSTUFF_SET_SIZE(x) ((x)*0x20000000) /* size of service buffer */ | |
461 | #define SSTUFF_SET_ADDR(x) ((x)>>8) /* set address of buffer */ | |
462 | ServWrite_Reg = 0x3C, /* ServWrite Pointer */ | |
463 | ServRead_Reg = 0x40, /* ServRead Pointer */ | |
464 | TxDepth_Reg = 0x44, /* FIFO Transmit Depth */ | |
465 | Butt_Reg = 0x48, /* Butt register */ | |
466 | CBR_ICG_Reg = 0x50, | |
467 | CBR_PTR_Reg = 0x54, | |
468 | PingCount_Reg = 0x58, /* Ping count */ | |
469 | DMA_Addr_Reg = 0x5C /* DMA address */ | |
470 | }; | |
471 | ||
472 | static inline bus_addr_t reg_addr(const struct lanai_dev *lanai, | |
473 | enum lanai_register reg) | |
474 | { | |
475 | return lanai->base + reg; | |
476 | } | |
477 | ||
478 | static inline u32 reg_read(const struct lanai_dev *lanai, | |
479 | enum lanai_register reg) | |
480 | { | |
481 | u32 t; | |
482 | t = readl(reg_addr(lanai, reg)); | |
483 | RWDEBUG("R [0x%08X] 0x%02X = 0x%08X\n", (unsigned int) lanai->base, | |
484 | (int) reg, t); | |
485 | return t; | |
486 | } | |
487 | ||
488 | static inline void reg_write(const struct lanai_dev *lanai, u32 val, | |
489 | enum lanai_register reg) | |
490 | { | |
491 | RWDEBUG("W [0x%08X] 0x%02X < 0x%08X\n", (unsigned int) lanai->base, | |
492 | (int) reg, val); | |
493 | writel(val, reg_addr(lanai, reg)); | |
494 | } | |
495 | ||
496 | static inline void conf1_write(const struct lanai_dev *lanai) | |
497 | { | |
498 | reg_write(lanai, lanai->conf1, Config1_Reg); | |
499 | } | |
500 | ||
501 | static inline void conf2_write(const struct lanai_dev *lanai) | |
502 | { | |
503 | reg_write(lanai, lanai->conf2, Config2_Reg); | |
504 | } | |
505 | ||
506 | /* Same as conf2_write(), but defers I/O if we're powered down */ | |
507 | static inline void conf2_write_if_powerup(const struct lanai_dev *lanai) | |
508 | { | |
509 | #ifdef USE_POWERDOWN | |
510 | if (unlikely((lanai->conf1 & CONFIG1_POWERDOWN) != 0)) | |
511 | return; | |
512 | #endif /* USE_POWERDOWN */ | |
513 | conf2_write(lanai); | |
514 | } | |
515 | ||
516 | static inline void reset_board(const struct lanai_dev *lanai) | |
517 | { | |
518 | DPRINTK("about to reset board\n"); | |
519 | reg_write(lanai, 0, Reset_Reg); | |
520 | /* | |
521 | * If we don't delay a little while here then we can end up | |
522 | * leaving the card in a VERY weird state and lock up the | |
523 | * PCI bus. This isn't documented anywhere but I've convinced | |
524 | * myself after a lot of painful experimentation | |
525 | */ | |
526 | udelay(5); | |
527 | } | |
528 | ||
529 | /* -------------------- CARD SRAM UTILITIES: */ | |
530 | ||
531 | /* The SRAM is mapped into normal PCI memory space - the only catch is | |
532 | * that it is only 16-bits wide but must be accessed as 32-bit. The | |
533 | * 16 high bits will be zero. We don't hide this, since they get | |
534 | * programmed mostly like discrete registers anyway | |
535 | */ | |
536 | #define SRAM_START (0x20000) | |
537 | #define SRAM_BYTES (0x20000) /* Again, half don't really exist */ | |
538 | ||
539 | static inline bus_addr_t sram_addr(const struct lanai_dev *lanai, int offset) | |
540 | { | |
541 | return lanai->base + SRAM_START + offset; | |
542 | } | |
543 | ||
544 | static inline u32 sram_read(const struct lanai_dev *lanai, int offset) | |
545 | { | |
546 | return readl(sram_addr(lanai, offset)); | |
547 | } | |
548 | ||
549 | static inline void sram_write(const struct lanai_dev *lanai, | |
550 | u32 val, int offset) | |
551 | { | |
552 | writel(val, sram_addr(lanai, offset)); | |
553 | } | |
554 | ||
de24a193 AB |
555 | static int __devinit sram_test_word(const struct lanai_dev *lanai, |
556 | int offset, u32 pattern) | |
1da177e4 LT |
557 | { |
558 | u32 readback; | |
559 | sram_write(lanai, pattern, offset); | |
560 | readback = sram_read(lanai, offset); | |
561 | if (likely(readback == pattern)) | |
562 | return 0; | |
563 | printk(KERN_ERR DEV_LABEL | |
564 | "(itf %d): SRAM word at %d bad: wrote 0x%X, read 0x%X\n", | |
565 | lanai->number, offset, | |
566 | (unsigned int) pattern, (unsigned int) readback); | |
567 | return -EIO; | |
568 | } | |
569 | ||
570 | static int __devinit sram_test_pass(const struct lanai_dev *lanai, u32 pattern) | |
571 | { | |
572 | int offset, result = 0; | |
573 | for (offset = 0; offset < SRAM_BYTES && result == 0; offset += 4) | |
574 | result = sram_test_word(lanai, offset, pattern); | |
575 | return result; | |
576 | } | |
577 | ||
578 | static int __devinit sram_test_and_clear(const struct lanai_dev *lanai) | |
579 | { | |
580 | #ifdef FULL_MEMORY_TEST | |
581 | int result; | |
582 | DPRINTK("testing SRAM\n"); | |
583 | if ((result = sram_test_pass(lanai, 0x5555)) != 0) | |
584 | return result; | |
585 | if ((result = sram_test_pass(lanai, 0xAAAA)) != 0) | |
586 | return result; | |
587 | #endif | |
588 | DPRINTK("clearing SRAM\n"); | |
589 | return sram_test_pass(lanai, 0x0000); | |
590 | } | |
591 | ||
592 | /* -------------------- CARD-BASED VCC TABLE UTILITIES: */ | |
593 | ||
594 | /* vcc table */ | |
595 | enum lanai_vcc_offset { | |
596 | vcc_rxaddr1 = 0x00, /* Location1, plus bits: */ | |
597 | #define RXADDR1_SET_SIZE(x) ((x)*0x0000100) /* size of RX buffer */ | |
598 | #define RXADDR1_SET_RMMODE(x) ((x)*0x00800) /* RM cell action; values: */ | |
599 | #define RMMODE_TRASH (0) /* discard */ | |
600 | #define RMMODE_PRESERVE (1) /* input as AAL0 */ | |
601 | #define RMMODE_PIPE (2) /* pipe to coscheduler */ | |
602 | #define RMMODE_PIPEALL (3) /* pipe non-RM too */ | |
603 | #define RXADDR1_OAM_PRESERVE (0x00002000) /* Input OAM cells as AAL0 */ | |
604 | #define RXADDR1_SET_MODE(x) ((x)*0x0004000) /* Reassembly mode */ | |
605 | #define RXMODE_TRASH (0) /* discard */ | |
606 | #define RXMODE_AAL0 (1) /* non-AAL5 mode */ | |
607 | #define RXMODE_AAL5 (2) /* AAL5, intr. each PDU */ | |
608 | #define RXMODE_AAL5_STREAM (3) /* AAL5 w/o per-PDU intr */ | |
609 | vcc_rxaddr2 = 0x04, /* Location2 */ | |
610 | vcc_rxcrc1 = 0x08, /* RX CRC claculation space */ | |
611 | vcc_rxcrc2 = 0x0C, | |
612 | vcc_rxwriteptr = 0x10, /* RX writeptr, plus bits: */ | |
613 | #define RXWRITEPTR_LASTEFCI (0x00002000) /* Last PDU had EFCI bit */ | |
614 | #define RXWRITEPTR_DROPPING (0x00004000) /* Had error, dropping */ | |
615 | #define RXWRITEPTR_TRASHING (0x00008000) /* Trashing */ | |
616 | vcc_rxbufstart = 0x14, /* RX bufstart, plus bits: */ | |
617 | #define RXBUFSTART_CLP (0x00004000) | |
618 | #define RXBUFSTART_CI (0x00008000) | |
619 | vcc_rxreadptr = 0x18, /* RX readptr */ | |
620 | vcc_txicg = 0x1C, /* TX ICG */ | |
621 | vcc_txaddr1 = 0x20, /* Location1, plus bits: */ | |
622 | #define TXADDR1_SET_SIZE(x) ((x)*0x0000100) /* size of TX buffer */ | |
623 | #define TXADDR1_ABR (0x00008000) /* use ABR (doesn't work) */ | |
624 | vcc_txaddr2 = 0x24, /* Location2 */ | |
625 | vcc_txcrc1 = 0x28, /* TX CRC claculation space */ | |
626 | vcc_txcrc2 = 0x2C, | |
627 | vcc_txreadptr = 0x30, /* TX Readptr, plus bits: */ | |
628 | #define TXREADPTR_GET_PTR(x) ((x)&0x01FFF) | |
629 | #define TXREADPTR_MASK_DELTA (0x0000E000) /* ? */ | |
630 | vcc_txendptr = 0x34, /* TX Endptr, plus bits: */ | |
631 | #define TXENDPTR_CLP (0x00002000) | |
632 | #define TXENDPTR_MASK_PDUMODE (0x0000C000) /* PDU mode; values: */ | |
633 | #define PDUMODE_AAL0 (0*0x04000) | |
634 | #define PDUMODE_AAL5 (2*0x04000) | |
635 | #define PDUMODE_AAL5STREAM (3*0x04000) | |
636 | vcc_txwriteptr = 0x38, /* TX Writeptr */ | |
637 | #define TXWRITEPTR_GET_PTR(x) ((x)&0x1FFF) | |
638 | vcc_txcbr_next = 0x3C /* # of next CBR VCI in ring */ | |
639 | #define TXCBR_NEXT_BOZO (0x00008000) /* "bozo bit" */ | |
640 | }; | |
641 | ||
642 | #define CARDVCC_SIZE (0x40) | |
643 | ||
644 | static inline bus_addr_t cardvcc_addr(const struct lanai_dev *lanai, | |
645 | vci_t vci) | |
646 | { | |
647 | return sram_addr(lanai, vci * CARDVCC_SIZE); | |
648 | } | |
649 | ||
650 | static inline u32 cardvcc_read(const struct lanai_vcc *lvcc, | |
651 | enum lanai_vcc_offset offset) | |
652 | { | |
653 | u32 val; | |
654 | APRINTK(lvcc->vbase != NULL, "cardvcc_read: unbound vcc!\n"); | |
655 | val= readl(lvcc->vbase + offset); | |
656 | RWDEBUG("VR vci=%04d 0x%02X = 0x%08X\n", | |
657 | lvcc->vci, (int) offset, val); | |
658 | return val; | |
659 | } | |
660 | ||
661 | static inline void cardvcc_write(const struct lanai_vcc *lvcc, | |
662 | u32 val, enum lanai_vcc_offset offset) | |
663 | { | |
664 | APRINTK(lvcc->vbase != NULL, "cardvcc_write: unbound vcc!\n"); | |
665 | APRINTK((val & ~0xFFFF) == 0, | |
666 | "cardvcc_write: bad val 0x%X (vci=%d, addr=0x%02X)\n", | |
667 | (unsigned int) val, lvcc->vci, (unsigned int) offset); | |
668 | RWDEBUG("VW vci=%04d 0x%02X > 0x%08X\n", | |
669 | lvcc->vci, (unsigned int) offset, (unsigned int) val); | |
670 | writel(val, lvcc->vbase + offset); | |
671 | } | |
672 | ||
673 | /* -------------------- COMPUTE SIZE OF AN AAL5 PDU: */ | |
674 | ||
675 | /* How many bytes will an AAL5 PDU take to transmit - remember that: | |
676 | * o we need to add 8 bytes for length, CPI, UU, and CRC | |
677 | * o we need to round up to 48 bytes for cells | |
678 | */ | |
679 | static inline int aal5_size(int size) | |
680 | { | |
681 | int cells = (size + 8 + 47) / 48; | |
682 | return cells * 48; | |
683 | } | |
684 | ||
685 | /* How many bytes can we send if we have "space" space, assuming we have | |
686 | * to send full cells | |
687 | */ | |
688 | static inline int aal5_spacefor(int space) | |
689 | { | |
690 | int cells = space / 48; | |
691 | return cells * 48; | |
692 | } | |
693 | ||
694 | /* -------------------- FREE AN ATM SKB: */ | |
695 | ||
696 | static inline void lanai_free_skb(struct atm_vcc *atmvcc, struct sk_buff *skb) | |
697 | { | |
698 | if (atmvcc->pop != NULL) | |
699 | atmvcc->pop(atmvcc, skb); | |
700 | else | |
701 | dev_kfree_skb_any(skb); | |
702 | } | |
703 | ||
704 | /* -------------------- TURN VCCS ON AND OFF: */ | |
705 | ||
706 | static void host_vcc_start_rx(const struct lanai_vcc *lvcc) | |
707 | { | |
708 | u32 addr1; | |
709 | if (lvcc->rx.atmvcc->qos.aal == ATM_AAL5) { | |
710 | dma_addr_t dmaaddr = lvcc->rx.buf.dmaaddr; | |
711 | cardvcc_write(lvcc, 0xFFFF, vcc_rxcrc1); | |
712 | cardvcc_write(lvcc, 0xFFFF, vcc_rxcrc2); | |
713 | cardvcc_write(lvcc, 0, vcc_rxwriteptr); | |
714 | cardvcc_write(lvcc, 0, vcc_rxbufstart); | |
715 | cardvcc_write(lvcc, 0, vcc_rxreadptr); | |
716 | cardvcc_write(lvcc, (dmaaddr >> 16) & 0xFFFF, vcc_rxaddr2); | |
717 | addr1 = ((dmaaddr >> 8) & 0xFF) | | |
718 | RXADDR1_SET_SIZE(lanai_buf_size_cardorder(&lvcc->rx.buf))| | |
719 | RXADDR1_SET_RMMODE(RMMODE_TRASH) | /* ??? */ | |
720 | /* RXADDR1_OAM_PRESERVE | --- no OAM support yet */ | |
721 | RXADDR1_SET_MODE(RXMODE_AAL5); | |
722 | } else | |
723 | addr1 = RXADDR1_SET_RMMODE(RMMODE_PRESERVE) | /* ??? */ | |
724 | RXADDR1_OAM_PRESERVE | /* ??? */ | |
725 | RXADDR1_SET_MODE(RXMODE_AAL0); | |
726 | /* This one must be last! */ | |
727 | cardvcc_write(lvcc, addr1, vcc_rxaddr1); | |
728 | } | |
729 | ||
730 | static void host_vcc_start_tx(const struct lanai_vcc *lvcc) | |
731 | { | |
732 | dma_addr_t dmaaddr = lvcc->tx.buf.dmaaddr; | |
733 | cardvcc_write(lvcc, 0, vcc_txicg); | |
734 | cardvcc_write(lvcc, 0xFFFF, vcc_txcrc1); | |
735 | cardvcc_write(lvcc, 0xFFFF, vcc_txcrc2); | |
736 | cardvcc_write(lvcc, 0, vcc_txreadptr); | |
737 | cardvcc_write(lvcc, 0, vcc_txendptr); | |
738 | cardvcc_write(lvcc, 0, vcc_txwriteptr); | |
739 | cardvcc_write(lvcc, | |
740 | (lvcc->tx.atmvcc->qos.txtp.traffic_class == ATM_CBR) ? | |
741 | TXCBR_NEXT_BOZO | lvcc->vci : 0, vcc_txcbr_next); | |
742 | cardvcc_write(lvcc, (dmaaddr >> 16) & 0xFFFF, vcc_txaddr2); | |
743 | cardvcc_write(lvcc, | |
744 | ((dmaaddr >> 8) & 0xFF) | | |
745 | TXADDR1_SET_SIZE(lanai_buf_size_cardorder(&lvcc->tx.buf)), | |
746 | vcc_txaddr1); | |
747 | } | |
748 | ||
749 | /* Shutdown receiving on card */ | |
750 | static void lanai_shutdown_rx_vci(const struct lanai_vcc *lvcc) | |
751 | { | |
752 | if (lvcc->vbase == NULL) /* We were never bound to a VCI */ | |
753 | return; | |
754 | /* 15.1.1 - set to trashing, wait one cell time (15us) */ | |
755 | cardvcc_write(lvcc, | |
756 | RXADDR1_SET_RMMODE(RMMODE_TRASH) | | |
757 | RXADDR1_SET_MODE(RXMODE_TRASH), vcc_rxaddr1); | |
758 | udelay(15); | |
759 | /* 15.1.2 - clear rest of entries */ | |
760 | cardvcc_write(lvcc, 0, vcc_rxaddr2); | |
761 | cardvcc_write(lvcc, 0, vcc_rxcrc1); | |
762 | cardvcc_write(lvcc, 0, vcc_rxcrc2); | |
763 | cardvcc_write(lvcc, 0, vcc_rxwriteptr); | |
764 | cardvcc_write(lvcc, 0, vcc_rxbufstart); | |
765 | cardvcc_write(lvcc, 0, vcc_rxreadptr); | |
766 | } | |
767 | ||
768 | /* Shutdown transmitting on card. | |
769 | * Unfortunately the lanai needs us to wait until all the data | |
770 | * drains out of the buffer before we can dealloc it, so this | |
771 | * can take awhile -- up to 370ms for a full 128KB buffer | |
772 | * assuming everone else is quiet. In theory the time is | |
773 | * boundless if there's a CBR VCC holding things up. | |
774 | */ | |
775 | static void lanai_shutdown_tx_vci(struct lanai_dev *lanai, | |
776 | struct lanai_vcc *lvcc) | |
777 | { | |
778 | struct sk_buff *skb; | |
779 | unsigned long flags, timeout; | |
780 | int read, write, lastread = -1; | |
781 | APRINTK(!in_interrupt(), | |
782 | "lanai_shutdown_tx_vci called w/o process context!\n"); | |
783 | if (lvcc->vbase == NULL) /* We were never bound to a VCI */ | |
784 | return; | |
785 | /* 15.2.1 - wait for queue to drain */ | |
786 | while ((skb = skb_dequeue(&lvcc->tx.backlog)) != NULL) | |
787 | lanai_free_skb(lvcc->tx.atmvcc, skb); | |
788 | read_lock_irqsave(&vcc_sklist_lock, flags); | |
789 | __clear_bit(lvcc->vci, lanai->backlog_vccs); | |
790 | read_unlock_irqrestore(&vcc_sklist_lock, flags); | |
791 | /* | |
792 | * We need to wait for the VCC to drain but don't wait forever. We | |
793 | * give each 1K of buffer size 1/128th of a second to clear out. | |
794 | * TODO: maybe disable CBR if we're about to timeout? | |
795 | */ | |
796 | timeout = jiffies + | |
797 | (((lanai_buf_size(&lvcc->tx.buf) / 1024) * HZ) >> 7); | |
798 | write = TXWRITEPTR_GET_PTR(cardvcc_read(lvcc, vcc_txwriteptr)); | |
799 | for (;;) { | |
800 | read = TXREADPTR_GET_PTR(cardvcc_read(lvcc, vcc_txreadptr)); | |
801 | if (read == write && /* Is TX buffer empty? */ | |
802 | (lvcc->tx.atmvcc->qos.txtp.traffic_class != ATM_CBR || | |
803 | (cardvcc_read(lvcc, vcc_txcbr_next) & | |
804 | TXCBR_NEXT_BOZO) == 0)) | |
805 | break; | |
806 | if (read != lastread) { /* Has there been any progress? */ | |
807 | lastread = read; | |
808 | timeout += HZ / 10; | |
809 | } | |
810 | if (unlikely(time_after(jiffies, timeout))) { | |
811 | printk(KERN_ERR DEV_LABEL "(itf %d): Timed out on " | |
812 | "backlog closing vci %d\n", | |
813 | lvcc->tx.atmvcc->dev->number, lvcc->vci); | |
814 | DPRINTK("read, write = %d, %d\n", read, write); | |
815 | break; | |
816 | } | |
817 | msleep(40); | |
818 | } | |
819 | /* 15.2.2 - clear out all tx registers */ | |
820 | cardvcc_write(lvcc, 0, vcc_txreadptr); | |
821 | cardvcc_write(lvcc, 0, vcc_txwriteptr); | |
822 | cardvcc_write(lvcc, 0, vcc_txendptr); | |
823 | cardvcc_write(lvcc, 0, vcc_txcrc1); | |
824 | cardvcc_write(lvcc, 0, vcc_txcrc2); | |
825 | cardvcc_write(lvcc, 0, vcc_txaddr2); | |
826 | cardvcc_write(lvcc, 0, vcc_txaddr1); | |
827 | } | |
828 | ||
829 | /* -------------------- MANAGING AAL0 RX BUFFER: */ | |
830 | ||
831 | static inline int aal0_buffer_allocate(struct lanai_dev *lanai) | |
832 | { | |
833 | DPRINTK("aal0_buffer_allocate: allocating AAL0 RX buffer\n"); | |
834 | lanai_buf_allocate(&lanai->aal0buf, AAL0_RX_BUFFER_SIZE, 80, | |
835 | lanai->pci); | |
836 | return (lanai->aal0buf.start == NULL) ? -ENOMEM : 0; | |
837 | } | |
838 | ||
839 | static inline void aal0_buffer_free(struct lanai_dev *lanai) | |
840 | { | |
841 | DPRINTK("aal0_buffer_allocate: freeing AAL0 RX buffer\n"); | |
842 | lanai_buf_deallocate(&lanai->aal0buf, lanai->pci); | |
843 | } | |
844 | ||
845 | /* -------------------- EEPROM UTILITIES: */ | |
846 | ||
847 | /* Offsets of data in the EEPROM */ | |
848 | #define EEPROM_COPYRIGHT (0) | |
849 | #define EEPROM_COPYRIGHT_LEN (44) | |
850 | #define EEPROM_CHECKSUM (62) | |
851 | #define EEPROM_CHECKSUM_REV (63) | |
852 | #define EEPROM_MAC (64) | |
853 | #define EEPROM_MAC_REV (70) | |
854 | #define EEPROM_SERIAL (112) | |
855 | #define EEPROM_SERIAL_REV (116) | |
856 | #define EEPROM_MAGIC (120) | |
857 | #define EEPROM_MAGIC_REV (124) | |
858 | ||
859 | #define EEPROM_MAGIC_VALUE (0x5AB478D2) | |
860 | ||
861 | #ifndef READ_EEPROM | |
862 | ||
863 | /* Stub functions to use if EEPROM reading is disabled */ | |
864 | static int __devinit eeprom_read(struct lanai_dev *lanai) | |
865 | { | |
866 | printk(KERN_INFO DEV_LABEL "(itf %d): *NOT* reading EEPROM\n", | |
867 | lanai->number); | |
868 | memset(&lanai->eeprom[EEPROM_MAC], 0, 6); | |
869 | return 0; | |
870 | } | |
871 | ||
872 | static int __devinit eeprom_validate(struct lanai_dev *lanai) | |
873 | { | |
874 | lanai->serialno = 0; | |
875 | lanai->magicno = EEPROM_MAGIC_VALUE; | |
876 | return 0; | |
877 | } | |
878 | ||
879 | #else /* READ_EEPROM */ | |
880 | ||
881 | static int __devinit eeprom_read(struct lanai_dev *lanai) | |
882 | { | |
883 | int i, address; | |
884 | u8 data; | |
885 | u32 tmp; | |
886 | #define set_config1(x) do { lanai->conf1 = x; conf1_write(lanai); \ | |
887 | } while (0) | |
888 | #define clock_h() set_config1(lanai->conf1 | CONFIG1_PROMCLK) | |
889 | #define clock_l() set_config1(lanai->conf1 &~ CONFIG1_PROMCLK) | |
890 | #define data_h() set_config1(lanai->conf1 | CONFIG1_PROMDATA) | |
891 | #define data_l() set_config1(lanai->conf1 &~ CONFIG1_PROMDATA) | |
892 | #define pre_read() do { data_h(); clock_h(); udelay(5); } while (0) | |
893 | #define read_pin() (reg_read(lanai, Status_Reg) & STATUS_PROMDATA) | |
894 | #define send_stop() do { data_l(); udelay(5); clock_h(); udelay(5); \ | |
895 | data_h(); udelay(5); } while (0) | |
896 | /* start with both clock and data high */ | |
897 | data_h(); clock_h(); udelay(5); | |
898 | for (address = 0; address < LANAI_EEPROM_SIZE; address++) { | |
899 | data = (address << 1) | 1; /* Command=read + address */ | |
900 | /* send start bit */ | |
901 | data_l(); udelay(5); | |
902 | clock_l(); udelay(5); | |
903 | for (i = 128; i != 0; i >>= 1) { /* write command out */ | |
904 | tmp = (lanai->conf1 & ~CONFIG1_PROMDATA) | | |
905 | (data & i) ? CONFIG1_PROMDATA : 0; | |
906 | if (lanai->conf1 != tmp) { | |
907 | set_config1(tmp); | |
908 | udelay(5); /* Let new data settle */ | |
909 | } | |
910 | clock_h(); udelay(5); clock_l(); udelay(5); | |
911 | } | |
912 | /* look for ack */ | |
913 | data_h(); clock_h(); udelay(5); | |
914 | if (read_pin() != 0) | |
915 | goto error; /* No ack seen */ | |
916 | clock_l(); udelay(5); | |
917 | /* read back result */ | |
918 | for (data = 0, i = 7; i >= 0; i--) { | |
919 | data_h(); clock_h(); udelay(5); | |
920 | data = (data << 1) | !!read_pin(); | |
921 | clock_l(); udelay(5); | |
922 | } | |
923 | /* look again for ack */ | |
924 | data_h(); clock_h(); udelay(5); | |
925 | if (read_pin() == 0) | |
926 | goto error; /* Spurious ack */ | |
927 | clock_l(); udelay(5); | |
928 | send_stop(); | |
929 | lanai->eeprom[address] = data; | |
930 | DPRINTK("EEPROM 0x%04X %02X\n", | |
931 | (unsigned int) address, (unsigned int) data); | |
932 | } | |
933 | return 0; | |
934 | error: | |
935 | clock_l(); udelay(5); /* finish read */ | |
936 | send_stop(); | |
937 | printk(KERN_ERR DEV_LABEL "(itf %d): error reading EEPROM byte %d\n", | |
938 | lanai->number, address); | |
939 | return -EIO; | |
940 | #undef set_config1 | |
941 | #undef clock_h | |
942 | #undef clock_l | |
943 | #undef data_h | |
944 | #undef data_l | |
945 | #undef pre_read | |
946 | #undef read_pin | |
947 | #undef send_stop | |
948 | } | |
949 | ||
950 | /* read a big-endian 4-byte value out of eeprom */ | |
951 | static inline u32 eeprom_be4(const struct lanai_dev *lanai, int address) | |
952 | { | |
c22c28f6 | 953 | return be32_to_cpup((const u32 *) &lanai->eeprom[address]); |
1da177e4 LT |
954 | } |
955 | ||
956 | /* Checksum/validate EEPROM contents */ | |
957 | static int __devinit eeprom_validate(struct lanai_dev *lanai) | |
958 | { | |
959 | int i, s; | |
960 | u32 v; | |
961 | const u8 *e = lanai->eeprom; | |
962 | #ifdef DEBUG | |
963 | /* First, see if we can get an ASCIIZ string out of the copyright */ | |
964 | for (i = EEPROM_COPYRIGHT; | |
965 | i < (EEPROM_COPYRIGHT + EEPROM_COPYRIGHT_LEN); i++) | |
966 | if (e[i] < 0x20 || e[i] > 0x7E) | |
967 | break; | |
968 | if ( i != EEPROM_COPYRIGHT && | |
969 | i != EEPROM_COPYRIGHT + EEPROM_COPYRIGHT_LEN && e[i] == '\0') | |
970 | DPRINTK("eeprom: copyright = \"%s\"\n", | |
971 | (char *) &e[EEPROM_COPYRIGHT]); | |
972 | else | |
973 | DPRINTK("eeprom: copyright not found\n"); | |
974 | #endif | |
975 | /* Validate checksum */ | |
976 | for (i = s = 0; i < EEPROM_CHECKSUM; i++) | |
977 | s += e[i]; | |
978 | s &= 0xFF; | |
979 | if (s != e[EEPROM_CHECKSUM]) { | |
980 | printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM checksum bad " | |
981 | "(wanted 0x%02X, got 0x%02X)\n", lanai->number, | |
982 | (unsigned int) s, (unsigned int) e[EEPROM_CHECKSUM]); | |
983 | return -EIO; | |
984 | } | |
985 | s ^= 0xFF; | |
986 | if (s != e[EEPROM_CHECKSUM_REV]) { | |
987 | printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM inverse checksum " | |
988 | "bad (wanted 0x%02X, got 0x%02X)\n", lanai->number, | |
989 | (unsigned int) s, (unsigned int) e[EEPROM_CHECKSUM_REV]); | |
990 | return -EIO; | |
991 | } | |
992 | /* Verify MAC address */ | |
993 | for (i = 0; i < 6; i++) | |
994 | if ((e[EEPROM_MAC + i] ^ e[EEPROM_MAC_REV + i]) != 0xFF) { | |
995 | printk(KERN_ERR DEV_LABEL | |
996 | "(itf %d) : EEPROM MAC addresses don't match " | |
997 | "(0x%02X, inverse 0x%02X)\n", lanai->number, | |
998 | (unsigned int) e[EEPROM_MAC + i], | |
999 | (unsigned int) e[EEPROM_MAC_REV + i]); | |
1000 | return -EIO; | |
1001 | } | |
1002 | DPRINTK("eeprom: MAC address = %02X:%02X:%02X:%02X:%02X:%02X\n", | |
1003 | e[EEPROM_MAC + 0], e[EEPROM_MAC + 1], e[EEPROM_MAC + 2], | |
1004 | e[EEPROM_MAC + 3], e[EEPROM_MAC + 4], e[EEPROM_MAC + 5]); | |
1005 | /* Verify serial number */ | |
1006 | lanai->serialno = eeprom_be4(lanai, EEPROM_SERIAL); | |
1007 | v = eeprom_be4(lanai, EEPROM_SERIAL_REV); | |
1008 | if ((lanai->serialno ^ v) != 0xFFFFFFFF) { | |
1009 | printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM serial numbers " | |
1010 | "don't match (0x%08X, inverse 0x%08X)\n", lanai->number, | |
1011 | (unsigned int) lanai->serialno, (unsigned int) v); | |
1012 | return -EIO; | |
1013 | } | |
1014 | DPRINTK("eeprom: Serial number = %d\n", (unsigned int) lanai->serialno); | |
1015 | /* Verify magic number */ | |
1016 | lanai->magicno = eeprom_be4(lanai, EEPROM_MAGIC); | |
1017 | v = eeprom_be4(lanai, EEPROM_MAGIC_REV); | |
1018 | if ((lanai->magicno ^ v) != 0xFFFFFFFF) { | |
1019 | printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM magic numbers " | |
1020 | "don't match (0x%08X, inverse 0x%08X)\n", lanai->number, | |
1021 | lanai->magicno, v); | |
1022 | return -EIO; | |
1023 | } | |
1024 | DPRINTK("eeprom: Magic number = 0x%08X\n", lanai->magicno); | |
1025 | if (lanai->magicno != EEPROM_MAGIC_VALUE) | |
1026 | printk(KERN_WARNING DEV_LABEL "(itf %d): warning - EEPROM " | |
1027 | "magic not what expected (got 0x%08X, not 0x%08X)\n", | |
1028 | lanai->number, (unsigned int) lanai->magicno, | |
1029 | (unsigned int) EEPROM_MAGIC_VALUE); | |
1030 | return 0; | |
1031 | } | |
1032 | ||
1033 | #endif /* READ_EEPROM */ | |
1034 | ||
1035 | static inline const u8 *eeprom_mac(const struct lanai_dev *lanai) | |
1036 | { | |
1037 | return &lanai->eeprom[EEPROM_MAC]; | |
1038 | } | |
1039 | ||
1040 | /* -------------------- INTERRUPT HANDLING UTILITIES: */ | |
1041 | ||
1042 | /* Interrupt types */ | |
1043 | #define INT_STATS (0x00000002) /* Statistics counter overflow */ | |
1044 | #define INT_SOOL (0x00000004) /* SOOL changed state */ | |
1045 | #define INT_LOCD (0x00000008) /* LOCD changed state */ | |
1046 | #define INT_LED (0x00000010) /* LED (HAPPI) changed state */ | |
1047 | #define INT_GPIN (0x00000020) /* GPIN changed state */ | |
1048 | #define INT_PING (0x00000040) /* PING_COUNT fulfilled */ | |
1049 | #define INT_WAKE (0x00000080) /* Lanai wants bus */ | |
1050 | #define INT_CBR0 (0x00000100) /* CBR sched hit VCI 0 */ | |
1051 | #define INT_LOCK (0x00000200) /* Service list overflow */ | |
1052 | #define INT_MISMATCH (0x00000400) /* TX magic list mismatch */ | |
1053 | #define INT_AAL0_STR (0x00000800) /* Non-AAL5 buffer half filled */ | |
1054 | #define INT_AAL0 (0x00001000) /* Non-AAL5 data available */ | |
1055 | #define INT_SERVICE (0x00002000) /* Service list entries available */ | |
1056 | #define INT_TABORTSENT (0x00004000) /* Target abort sent by lanai */ | |
1057 | #define INT_TABORTBM (0x00008000) /* Abort rcv'd as bus master */ | |
1058 | #define INT_TIMEOUTBM (0x00010000) /* No response to bus master */ | |
1059 | #define INT_PCIPARITY (0x00020000) /* Parity error on PCI */ | |
1060 | ||
1061 | /* Sets of the above */ | |
1062 | #define INT_ALL (0x0003FFFE) /* All interrupts */ | |
1063 | #define INT_STATUS (0x0000003C) /* Some status pin changed */ | |
1064 | #define INT_DMASHUT (0x00038000) /* DMA engine got shut down */ | |
1065 | #define INT_SEGSHUT (0x00000700) /* Segmentation got shut down */ | |
1066 | ||
1067 | static inline u32 intr_pending(const struct lanai_dev *lanai) | |
1068 | { | |
1069 | return reg_read(lanai, IntStatusMasked_Reg); | |
1070 | } | |
1071 | ||
1072 | static inline void intr_enable(const struct lanai_dev *lanai, u32 i) | |
1073 | { | |
1074 | reg_write(lanai, i, IntControlEna_Reg); | |
1075 | } | |
1076 | ||
1077 | static inline void intr_disable(const struct lanai_dev *lanai, u32 i) | |
1078 | { | |
1079 | reg_write(lanai, i, IntControlDis_Reg); | |
1080 | } | |
1081 | ||
1082 | /* -------------------- CARD/PCI STATUS: */ | |
1083 | ||
1084 | static void status_message(int itf, const char *name, int status) | |
1085 | { | |
1086 | static const char *onoff[2] = { "off to on", "on to off" }; | |
1087 | printk(KERN_INFO DEV_LABEL "(itf %d): %s changed from %s\n", | |
1088 | itf, name, onoff[!status]); | |
1089 | } | |
1090 | ||
1091 | static void lanai_check_status(struct lanai_dev *lanai) | |
1092 | { | |
1093 | u32 new = reg_read(lanai, Status_Reg); | |
1094 | u32 changes = new ^ lanai->status; | |
1095 | lanai->status = new; | |
1096 | #define e(flag, name) \ | |
1097 | if (changes & flag) \ | |
1098 | status_message(lanai->number, name, new & flag) | |
1099 | e(STATUS_SOOL, "SOOL"); | |
1100 | e(STATUS_LOCD, "LOCD"); | |
1101 | e(STATUS_LED, "LED"); | |
1102 | e(STATUS_GPIN, "GPIN"); | |
1103 | #undef e | |
1104 | } | |
1105 | ||
1106 | static void pcistatus_got(int itf, const char *name) | |
1107 | { | |
1108 | printk(KERN_INFO DEV_LABEL "(itf %d): PCI got %s error\n", itf, name); | |
1109 | } | |
1110 | ||
1111 | static void pcistatus_check(struct lanai_dev *lanai, int clearonly) | |
1112 | { | |
1113 | u16 s; | |
1114 | int result; | |
1115 | result = pci_read_config_word(lanai->pci, PCI_STATUS, &s); | |
1116 | if (result != PCIBIOS_SUCCESSFUL) { | |
1117 | printk(KERN_ERR DEV_LABEL "(itf %d): can't read PCI_STATUS: " | |
1118 | "%d\n", lanai->number, result); | |
1119 | return; | |
1120 | } | |
1121 | s &= PCI_STATUS_DETECTED_PARITY | PCI_STATUS_SIG_SYSTEM_ERROR | | |
1122 | PCI_STATUS_REC_MASTER_ABORT | PCI_STATUS_REC_TARGET_ABORT | | |
1123 | PCI_STATUS_SIG_TARGET_ABORT | PCI_STATUS_PARITY; | |
1124 | if (s == 0) | |
1125 | return; | |
1126 | result = pci_write_config_word(lanai->pci, PCI_STATUS, s); | |
1127 | if (result != PCIBIOS_SUCCESSFUL) | |
1128 | printk(KERN_ERR DEV_LABEL "(itf %d): can't write PCI_STATUS: " | |
1129 | "%d\n", lanai->number, result); | |
1130 | if (clearonly) | |
1131 | return; | |
1132 | #define e(flag, name, stat) \ | |
1133 | if (s & flag) { \ | |
1134 | pcistatus_got(lanai->number, name); \ | |
1135 | ++lanai->stats.pcierr_##stat; \ | |
1136 | } | |
1137 | e(PCI_STATUS_DETECTED_PARITY, "parity", parity_detect); | |
1138 | e(PCI_STATUS_SIG_SYSTEM_ERROR, "signalled system", serr_set); | |
1139 | e(PCI_STATUS_REC_MASTER_ABORT, "master", master_abort); | |
1140 | e(PCI_STATUS_REC_TARGET_ABORT, "master target", m_target_abort); | |
1141 | e(PCI_STATUS_SIG_TARGET_ABORT, "slave", s_target_abort); | |
1142 | e(PCI_STATUS_PARITY, "master parity", master_parity); | |
1143 | #undef e | |
1144 | } | |
1145 | ||
1146 | /* -------------------- VCC TX BUFFER UTILITIES: */ | |
1147 | ||
1148 | /* space left in tx buffer in bytes */ | |
1149 | static inline int vcc_tx_space(const struct lanai_vcc *lvcc, int endptr) | |
1150 | { | |
1151 | int r; | |
1152 | r = endptr * 16; | |
1153 | r -= ((unsigned long) lvcc->tx.buf.ptr) - | |
1154 | ((unsigned long) lvcc->tx.buf.start); | |
1155 | r -= 16; /* Leave "bubble" - if start==end it looks empty */ | |
1156 | if (r < 0) | |
1157 | r += lanai_buf_size(&lvcc->tx.buf); | |
1158 | return r; | |
1159 | } | |
1160 | ||
1161 | /* test if VCC is currently backlogged */ | |
c22c28f6 | 1162 | static inline int vcc_is_backlogged(const struct lanai_vcc *lvcc) |
1da177e4 LT |
1163 | { |
1164 | return !skb_queue_empty(&lvcc->tx.backlog); | |
1165 | } | |
1166 | ||
1167 | /* Bit fields in the segmentation buffer descriptor */ | |
1168 | #define DESCRIPTOR_MAGIC (0xD0000000) | |
1169 | #define DESCRIPTOR_AAL5 (0x00008000) | |
1170 | #define DESCRIPTOR_AAL5_STREAM (0x00004000) | |
1171 | #define DESCRIPTOR_CLP (0x00002000) | |
1172 | ||
1173 | /* Add 32-bit descriptor with its padding */ | |
1174 | static inline void vcc_tx_add_aal5_descriptor(struct lanai_vcc *lvcc, | |
1175 | u32 flags, int len) | |
1176 | { | |
1177 | int pos; | |
1178 | APRINTK((((unsigned long) lvcc->tx.buf.ptr) & 15) == 0, | |
1179 | "vcc_tx_add_aal5_descriptor: bad ptr=%p\n", lvcc->tx.buf.ptr); | |
1180 | lvcc->tx.buf.ptr += 4; /* Hope the values REALLY don't matter */ | |
1181 | pos = ((unsigned char *) lvcc->tx.buf.ptr) - | |
1182 | (unsigned char *) lvcc->tx.buf.start; | |
1183 | APRINTK((pos & ~0x0001FFF0) == 0, | |
1184 | "vcc_tx_add_aal5_descriptor: bad pos (%d) before, vci=%d, " | |
1185 | "start,ptr,end=%p,%p,%p\n", pos, lvcc->vci, | |
1186 | lvcc->tx.buf.start, lvcc->tx.buf.ptr, lvcc->tx.buf.end); | |
1187 | pos = (pos + len) & (lanai_buf_size(&lvcc->tx.buf) - 1); | |
1188 | APRINTK((pos & ~0x0001FFF0) == 0, | |
1189 | "vcc_tx_add_aal5_descriptor: bad pos (%d) after, vci=%d, " | |
1190 | "start,ptr,end=%p,%p,%p\n", pos, lvcc->vci, | |
1191 | lvcc->tx.buf.start, lvcc->tx.buf.ptr, lvcc->tx.buf.end); | |
1192 | lvcc->tx.buf.ptr[-1] = | |
1193 | cpu_to_le32(DESCRIPTOR_MAGIC | DESCRIPTOR_AAL5 | | |
1194 | ((lvcc->tx.atmvcc->atm_options & ATM_ATMOPT_CLP) ? | |
1195 | DESCRIPTOR_CLP : 0) | flags | pos >> 4); | |
1196 | if (lvcc->tx.buf.ptr >= lvcc->tx.buf.end) | |
1197 | lvcc->tx.buf.ptr = lvcc->tx.buf.start; | |
1198 | } | |
1199 | ||
1200 | /* Add 32-bit AAL5 trailer and leave room for its CRC */ | |
1201 | static inline void vcc_tx_add_aal5_trailer(struct lanai_vcc *lvcc, | |
1202 | int len, int cpi, int uu) | |
1203 | { | |
1204 | APRINTK((((unsigned long) lvcc->tx.buf.ptr) & 15) == 8, | |
1205 | "vcc_tx_add_aal5_trailer: bad ptr=%p\n", lvcc->tx.buf.ptr); | |
1206 | lvcc->tx.buf.ptr += 2; | |
1207 | lvcc->tx.buf.ptr[-2] = cpu_to_be32((uu << 24) | (cpi << 16) | len); | |
1208 | if (lvcc->tx.buf.ptr >= lvcc->tx.buf.end) | |
1209 | lvcc->tx.buf.ptr = lvcc->tx.buf.start; | |
1210 | } | |
1211 | ||
1212 | static inline void vcc_tx_memcpy(struct lanai_vcc *lvcc, | |
1213 | const unsigned char *src, int n) | |
1214 | { | |
1215 | unsigned char *e; | |
1216 | int m; | |
1217 | e = ((unsigned char *) lvcc->tx.buf.ptr) + n; | |
1218 | m = e - (unsigned char *) lvcc->tx.buf.end; | |
1219 | if (m < 0) | |
1220 | m = 0; | |
1221 | memcpy(lvcc->tx.buf.ptr, src, n - m); | |
1222 | if (m != 0) { | |
1223 | memcpy(lvcc->tx.buf.start, src + n - m, m); | |
1224 | e = ((unsigned char *) lvcc->tx.buf.start) + m; | |
1225 | } | |
1226 | lvcc->tx.buf.ptr = (u32 *) e; | |
1227 | } | |
1228 | ||
1229 | static inline void vcc_tx_memzero(struct lanai_vcc *lvcc, int n) | |
1230 | { | |
1231 | unsigned char *e; | |
1232 | int m; | |
1233 | if (n == 0) | |
1234 | return; | |
1235 | e = ((unsigned char *) lvcc->tx.buf.ptr) + n; | |
1236 | m = e - (unsigned char *) lvcc->tx.buf.end; | |
1237 | if (m < 0) | |
1238 | m = 0; | |
1239 | memset(lvcc->tx.buf.ptr, 0, n - m); | |
1240 | if (m != 0) { | |
1241 | memset(lvcc->tx.buf.start, 0, m); | |
1242 | e = ((unsigned char *) lvcc->tx.buf.start) + m; | |
1243 | } | |
1244 | lvcc->tx.buf.ptr = (u32 *) e; | |
1245 | } | |
1246 | ||
1247 | /* Update "butt" register to specify new WritePtr */ | |
1248 | static inline void lanai_endtx(struct lanai_dev *lanai, | |
1249 | const struct lanai_vcc *lvcc) | |
1250 | { | |
1251 | int i, ptr = ((unsigned char *) lvcc->tx.buf.ptr) - | |
1252 | (unsigned char *) lvcc->tx.buf.start; | |
1253 | APRINTK((ptr & ~0x0001FFF0) == 0, | |
1254 | "lanai_endtx: bad ptr (%d), vci=%d, start,ptr,end=%p,%p,%p\n", | |
1255 | ptr, lvcc->vci, lvcc->tx.buf.start, lvcc->tx.buf.ptr, | |
1256 | lvcc->tx.buf.end); | |
1257 | ||
1258 | /* | |
1259 | * Since the "butt register" is a shared resounce on the card we | |
1260 | * serialize all accesses to it through this spinlock. This is | |
1261 | * mostly just paranoia sicne the register is rarely "busy" anyway | |
1262 | * but is needed for correctness. | |
1263 | */ | |
1264 | spin_lock(&lanai->endtxlock); | |
1265 | /* | |
1266 | * We need to check if the "butt busy" bit is set before | |
1267 | * updating the butt register. In theory this should | |
1268 | * never happen because the ATM card is plenty fast at | |
1269 | * updating the register. Still, we should make sure | |
1270 | */ | |
1271 | for (i = 0; reg_read(lanai, Status_Reg) & STATUS_BUTTBUSY; i++) { | |
1272 | if (unlikely(i > 50)) { | |
1273 | printk(KERN_ERR DEV_LABEL "(itf %d): butt register " | |
1274 | "always busy!\n", lanai->number); | |
1275 | break; | |
1276 | } | |
1277 | udelay(5); | |
1278 | } | |
1279 | /* | |
1280 | * Before we tall the card to start work we need to be sure 100% of | |
1281 | * the info in the service buffer has been written before we tell | |
1282 | * the card about it | |
1283 | */ | |
1284 | wmb(); | |
1285 | reg_write(lanai, (ptr << 12) | lvcc->vci, Butt_Reg); | |
1286 | spin_unlock(&lanai->endtxlock); | |
1287 | } | |
1288 | ||
1289 | /* | |
1290 | * Add one AAL5 PDU to lvcc's transmit buffer. Caller garauntees there's | |
1291 | * space available. "pdusize" is the number of bytes the PDU will take | |
1292 | */ | |
1293 | static void lanai_send_one_aal5(struct lanai_dev *lanai, | |
1294 | struct lanai_vcc *lvcc, struct sk_buff *skb, int pdusize) | |
1295 | { | |
1296 | int pad; | |
1297 | APRINTK(pdusize == aal5_size(skb->len), | |
1298 | "lanai_send_one_aal5: wrong size packet (%d != %d)\n", | |
1299 | pdusize, aal5_size(skb->len)); | |
1300 | vcc_tx_add_aal5_descriptor(lvcc, 0, pdusize); | |
1301 | pad = pdusize - skb->len - 8; | |
1302 | APRINTK(pad >= 0, "pad is negative (%d)\n", pad); | |
1303 | APRINTK(pad < 48, "pad is too big (%d)\n", pad); | |
1304 | vcc_tx_memcpy(lvcc, skb->data, skb->len); | |
1305 | vcc_tx_memzero(lvcc, pad); | |
1306 | vcc_tx_add_aal5_trailer(lvcc, skb->len, 0, 0); | |
1307 | lanai_endtx(lanai, lvcc); | |
1308 | lanai_free_skb(lvcc->tx.atmvcc, skb); | |
1309 | atomic_inc(&lvcc->tx.atmvcc->stats->tx); | |
1310 | } | |
1311 | ||
1312 | /* Try to fill the buffer - don't call unless there is backlog */ | |
1313 | static void vcc_tx_unqueue_aal5(struct lanai_dev *lanai, | |
1314 | struct lanai_vcc *lvcc, int endptr) | |
1315 | { | |
1316 | int n; | |
1317 | struct sk_buff *skb; | |
1318 | int space = vcc_tx_space(lvcc, endptr); | |
1319 | APRINTK(vcc_is_backlogged(lvcc), | |
1320 | "vcc_tx_unqueue() called with empty backlog (vci=%d)\n", | |
1321 | lvcc->vci); | |
1322 | while (space >= 64) { | |
1323 | skb = skb_dequeue(&lvcc->tx.backlog); | |
1324 | if (skb == NULL) | |
1325 | goto no_backlog; | |
1326 | n = aal5_size(skb->len); | |
1327 | if (n + 16 > space) { | |
1328 | /* No room for this packet - put it back on queue */ | |
1329 | skb_queue_head(&lvcc->tx.backlog, skb); | |
1330 | return; | |
1331 | } | |
1332 | lanai_send_one_aal5(lanai, lvcc, skb, n); | |
1333 | space -= n + 16; | |
1334 | } | |
1335 | if (!vcc_is_backlogged(lvcc)) { | |
1336 | no_backlog: | |
1337 | __clear_bit(lvcc->vci, lanai->backlog_vccs); | |
1338 | } | |
1339 | } | |
1340 | ||
1341 | /* Given an skb that we want to transmit either send it now or queue */ | |
1342 | static void vcc_tx_aal5(struct lanai_dev *lanai, struct lanai_vcc *lvcc, | |
1343 | struct sk_buff *skb) | |
1344 | { | |
1345 | int space, n; | |
1346 | if (vcc_is_backlogged(lvcc)) /* Already backlogged */ | |
1347 | goto queue_it; | |
1348 | space = vcc_tx_space(lvcc, | |
1349 | TXREADPTR_GET_PTR(cardvcc_read(lvcc, vcc_txreadptr))); | |
1350 | n = aal5_size(skb->len); | |
1351 | APRINTK(n + 16 >= 64, "vcc_tx_aal5: n too small (%d)\n", n); | |
1352 | if (space < n + 16) { /* No space for this PDU */ | |
1353 | __set_bit(lvcc->vci, lanai->backlog_vccs); | |
1354 | queue_it: | |
1355 | skb_queue_tail(&lvcc->tx.backlog, skb); | |
1356 | return; | |
1357 | } | |
1358 | lanai_send_one_aal5(lanai, lvcc, skb, n); | |
1359 | } | |
1360 | ||
1361 | static void vcc_tx_unqueue_aal0(struct lanai_dev *lanai, | |
1362 | struct lanai_vcc *lvcc, int endptr) | |
1363 | { | |
1364 | printk(KERN_INFO DEV_LABEL | |
1365 | ": vcc_tx_unqueue_aal0: not implemented\n"); | |
1366 | } | |
1367 | ||
1368 | static void vcc_tx_aal0(struct lanai_dev *lanai, struct lanai_vcc *lvcc, | |
1369 | struct sk_buff *skb) | |
1370 | { | |
1371 | printk(KERN_INFO DEV_LABEL ": vcc_tx_aal0: not implemented\n"); | |
1372 | /* Remember to increment lvcc->tx.atmvcc->stats->tx */ | |
1373 | lanai_free_skb(lvcc->tx.atmvcc, skb); | |
1374 | } | |
1375 | ||
1376 | /* -------------------- VCC RX BUFFER UTILITIES: */ | |
1377 | ||
1378 | /* unlike the _tx_ cousins, this doesn't update ptr */ | |
1379 | static inline void vcc_rx_memcpy(unsigned char *dest, | |
1380 | const struct lanai_vcc *lvcc, int n) | |
1381 | { | |
1382 | int m = ((const unsigned char *) lvcc->rx.buf.ptr) + n - | |
1383 | ((const unsigned char *) (lvcc->rx.buf.end)); | |
1384 | if (m < 0) | |
1385 | m = 0; | |
1386 | memcpy(dest, lvcc->rx.buf.ptr, n - m); | |
1387 | memcpy(dest + n - m, lvcc->rx.buf.start, m); | |
1388 | /* Make sure that these copies don't get reordered */ | |
1389 | barrier(); | |
1390 | } | |
1391 | ||
1392 | /* Receive AAL5 data on a VCC with a particular endptr */ | |
1393 | static void vcc_rx_aal5(struct lanai_vcc *lvcc, int endptr) | |
1394 | { | |
1395 | int size; | |
1396 | struct sk_buff *skb; | |
c22c28f6 MBJ |
1397 | const u32 *x; |
1398 | u32 *end = &lvcc->rx.buf.start[endptr * 4]; | |
1da177e4 LT |
1399 | int n = ((unsigned long) end) - ((unsigned long) lvcc->rx.buf.ptr); |
1400 | if (n < 0) | |
1401 | n += lanai_buf_size(&lvcc->rx.buf); | |
1402 | APRINTK(n >= 0 && n < lanai_buf_size(&lvcc->rx.buf) && !(n & 15), | |
1403 | "vcc_rx_aal5: n out of range (%d/%Zu)\n", | |
1404 | n, lanai_buf_size(&lvcc->rx.buf)); | |
1405 | /* Recover the second-to-last word to get true pdu length */ | |
1406 | if ((x = &end[-2]) < lvcc->rx.buf.start) | |
1407 | x = &lvcc->rx.buf.end[-2]; | |
1408 | /* | |
1409 | * Before we actually read from the buffer, make sure the memory | |
1410 | * changes have arrived | |
1411 | */ | |
1412 | rmb(); | |
1413 | size = be32_to_cpup(x) & 0xffff; | |
1414 | if (unlikely(n != aal5_size(size))) { | |
1415 | /* Make sure size matches padding */ | |
1416 | printk(KERN_INFO DEV_LABEL "(itf %d): Got bad AAL5 length " | |
1417 | "on vci=%d - size=%d n=%d\n", | |
1418 | lvcc->rx.atmvcc->dev->number, lvcc->vci, size, n); | |
1419 | lvcc->stats.x.aal5.rx_badlen++; | |
1420 | goto out; | |
1421 | } | |
1422 | skb = atm_alloc_charge(lvcc->rx.atmvcc, size, GFP_ATOMIC); | |
1423 | if (unlikely(skb == NULL)) { | |
1424 | lvcc->stats.rx_nomem++; | |
1425 | goto out; | |
1426 | } | |
1427 | skb_put(skb, size); | |
1428 | vcc_rx_memcpy(skb->data, lvcc, size); | |
1429 | ATM_SKB(skb)->vcc = lvcc->rx.atmvcc; | |
a61bbcf2 | 1430 | __net_timestamp(skb); |
1da177e4 LT |
1431 | lvcc->rx.atmvcc->push(lvcc->rx.atmvcc, skb); |
1432 | atomic_inc(&lvcc->rx.atmvcc->stats->rx); | |
1433 | out: | |
1434 | lvcc->rx.buf.ptr = end; | |
1435 | cardvcc_write(lvcc, endptr, vcc_rxreadptr); | |
1436 | } | |
1437 | ||
1438 | static void vcc_rx_aal0(struct lanai_dev *lanai) | |
1439 | { | |
1440 | printk(KERN_INFO DEV_LABEL ": vcc_rx_aal0: not implemented\n"); | |
1441 | /* Remember to get read_lock(&vcc_sklist_lock) while looking up VC */ | |
1442 | /* Remember to increment lvcc->rx.atmvcc->stats->rx */ | |
1443 | } | |
1444 | ||
1445 | /* -------------------- MANAGING HOST-BASED VCC TABLE: */ | |
1446 | ||
1447 | /* Decide whether to use vmalloc or get_zeroed_page for VCC table */ | |
1448 | #if (NUM_VCI * BITS_PER_LONG) <= PAGE_SIZE | |
1449 | #define VCCTABLE_GETFREEPAGE | |
1450 | #else | |
1451 | #include <linux/vmalloc.h> | |
1452 | #endif | |
1453 | ||
1454 | static int __devinit vcc_table_allocate(struct lanai_dev *lanai) | |
1455 | { | |
1456 | #ifdef VCCTABLE_GETFREEPAGE | |
1457 | APRINTK((lanai->num_vci) * sizeof(struct lanai_vcc *) <= PAGE_SIZE, | |
1458 | "vcc table > PAGE_SIZE!"); | |
1459 | lanai->vccs = (struct lanai_vcc **) get_zeroed_page(GFP_KERNEL); | |
1460 | return (lanai->vccs == NULL) ? -ENOMEM : 0; | |
1461 | #else | |
1462 | int bytes = (lanai->num_vci) * sizeof(struct lanai_vcc *); | |
1463 | lanai->vccs = (struct lanai_vcc **) vmalloc(bytes); | |
1464 | if (unlikely(lanai->vccs == NULL)) | |
1465 | return -ENOMEM; | |
1466 | memset(lanai->vccs, 0, bytes); | |
1467 | return 0; | |
1468 | #endif | |
1469 | } | |
1470 | ||
1471 | static inline void vcc_table_deallocate(const struct lanai_dev *lanai) | |
1472 | { | |
1473 | #ifdef VCCTABLE_GETFREEPAGE | |
1474 | free_page((unsigned long) lanai->vccs); | |
1475 | #else | |
1476 | vfree(lanai->vccs); | |
1477 | #endif | |
1478 | } | |
1479 | ||
1480 | /* Allocate a fresh lanai_vcc, with the appropriate things cleared */ | |
1481 | static inline struct lanai_vcc *new_lanai_vcc(void) | |
1482 | { | |
1483 | struct lanai_vcc *lvcc; | |
0c1cca1d | 1484 | lvcc = kzalloc(sizeof(*lvcc), GFP_KERNEL); |
1da177e4 | 1485 | if (likely(lvcc != NULL)) { |
1da177e4 LT |
1486 | skb_queue_head_init(&lvcc->tx.backlog); |
1487 | #ifdef DEBUG | |
1da177e4 LT |
1488 | lvcc->vci = -1; |
1489 | #endif | |
1490 | } | |
1491 | return lvcc; | |
1492 | } | |
1493 | ||
1494 | static int lanai_get_sized_buffer(struct lanai_dev *lanai, | |
1495 | struct lanai_buffer *buf, int max_sdu, int multiplier, | |
1496 | const char *name) | |
1497 | { | |
1498 | int size; | |
1499 | if (unlikely(max_sdu < 1)) | |
1500 | max_sdu = 1; | |
1501 | max_sdu = aal5_size(max_sdu); | |
1502 | size = (max_sdu + 16) * multiplier + 16; | |
1503 | lanai_buf_allocate(buf, size, max_sdu + 32, lanai->pci); | |
1504 | if (unlikely(buf->start == NULL)) | |
1505 | return -ENOMEM; | |
1506 | if (unlikely(lanai_buf_size(buf) < size)) | |
1507 | printk(KERN_WARNING DEV_LABEL "(itf %d): wanted %d bytes " | |
1508 | "for %s buffer, got only %Zu\n", lanai->number, size, | |
1509 | name, lanai_buf_size(buf)); | |
1510 | DPRINTK("Allocated %Zu byte %s buffer\n", lanai_buf_size(buf), name); | |
1511 | return 0; | |
1512 | } | |
1513 | ||
1514 | /* Setup a RX buffer for a currently unbound AAL5 vci */ | |
1515 | static inline int lanai_setup_rx_vci_aal5(struct lanai_dev *lanai, | |
1516 | struct lanai_vcc *lvcc, const struct atm_qos *qos) | |
1517 | { | |
1518 | return lanai_get_sized_buffer(lanai, &lvcc->rx.buf, | |
1519 | qos->rxtp.max_sdu, AAL5_RX_MULTIPLIER, "RX"); | |
1520 | } | |
1521 | ||
1522 | /* Setup a TX buffer for a currently unbound AAL5 vci */ | |
1523 | static int lanai_setup_tx_vci(struct lanai_dev *lanai, struct lanai_vcc *lvcc, | |
1524 | const struct atm_qos *qos) | |
1525 | { | |
1526 | int max_sdu, multiplier; | |
1527 | if (qos->aal == ATM_AAL0) { | |
1528 | lvcc->tx.unqueue = vcc_tx_unqueue_aal0; | |
1529 | max_sdu = ATM_CELL_SIZE - 1; | |
1530 | multiplier = AAL0_TX_MULTIPLIER; | |
1531 | } else { | |
1532 | lvcc->tx.unqueue = vcc_tx_unqueue_aal5; | |
1533 | max_sdu = qos->txtp.max_sdu; | |
1534 | multiplier = AAL5_TX_MULTIPLIER; | |
1535 | } | |
1536 | return lanai_get_sized_buffer(lanai, &lvcc->tx.buf, max_sdu, | |
1537 | multiplier, "TX"); | |
1538 | } | |
1539 | ||
1540 | static inline void host_vcc_bind(struct lanai_dev *lanai, | |
1541 | struct lanai_vcc *lvcc, vci_t vci) | |
1542 | { | |
1543 | if (lvcc->vbase != NULL) | |
1544 | return; /* We already were bound in the other direction */ | |
1545 | DPRINTK("Binding vci %d\n", vci); | |
1546 | #ifdef USE_POWERDOWN | |
1547 | if (lanai->nbound++ == 0) { | |
1548 | DPRINTK("Coming out of powerdown\n"); | |
1549 | lanai->conf1 &= ~CONFIG1_POWERDOWN; | |
1550 | conf1_write(lanai); | |
1551 | conf2_write(lanai); | |
1552 | } | |
1553 | #endif | |
1554 | lvcc->vbase = cardvcc_addr(lanai, vci); | |
1555 | lanai->vccs[lvcc->vci = vci] = lvcc; | |
1556 | } | |
1557 | ||
1558 | static inline void host_vcc_unbind(struct lanai_dev *lanai, | |
1559 | struct lanai_vcc *lvcc) | |
1560 | { | |
1561 | if (lvcc->vbase == NULL) | |
1562 | return; /* This vcc was never bound */ | |
1563 | DPRINTK("Unbinding vci %d\n", lvcc->vci); | |
1564 | lvcc->vbase = NULL; | |
1565 | lanai->vccs[lvcc->vci] = NULL; | |
1566 | #ifdef USE_POWERDOWN | |
1567 | if (--lanai->nbound == 0) { | |
1568 | DPRINTK("Going into powerdown\n"); | |
1569 | lanai->conf1 |= CONFIG1_POWERDOWN; | |
1570 | conf1_write(lanai); | |
1571 | } | |
1572 | #endif | |
1573 | } | |
1574 | ||
1575 | /* -------------------- RESET CARD: */ | |
1576 | ||
1577 | static void lanai_reset(struct lanai_dev *lanai) | |
1578 | { | |
1579 | printk(KERN_CRIT DEV_LABEL "(itf %d): *NOT* reseting - not " | |
1580 | "implemented\n", lanai->number); | |
1581 | /* TODO */ | |
1582 | /* The following is just a hack until we write the real | |
1583 | * resetter - at least ack whatever interrupt sent us | |
1584 | * here | |
1585 | */ | |
1586 | reg_write(lanai, INT_ALL, IntAck_Reg); | |
1587 | lanai->stats.card_reset++; | |
1588 | } | |
1589 | ||
1590 | /* -------------------- SERVICE LIST UTILITIES: */ | |
1591 | ||
1592 | /* | |
1593 | * Allocate service buffer and tell card about it | |
1594 | */ | |
1595 | static int __devinit service_buffer_allocate(struct lanai_dev *lanai) | |
1596 | { | |
1597 | lanai_buf_allocate(&lanai->service, SERVICE_ENTRIES * 4, 8, | |
1598 | lanai->pci); | |
1599 | if (unlikely(lanai->service.start == NULL)) | |
1600 | return -ENOMEM; | |
1601 | DPRINTK("allocated service buffer at 0x%08lX, size %Zu(%d)\n", | |
1602 | (unsigned long) lanai->service.start, | |
1603 | lanai_buf_size(&lanai->service), | |
1604 | lanai_buf_size_cardorder(&lanai->service)); | |
1605 | /* Clear ServWrite register to be safe */ | |
1606 | reg_write(lanai, 0, ServWrite_Reg); | |
1607 | /* ServiceStuff register contains size and address of buffer */ | |
1608 | reg_write(lanai, | |
1609 | SSTUFF_SET_SIZE(lanai_buf_size_cardorder(&lanai->service)) | | |
1610 | SSTUFF_SET_ADDR(lanai->service.dmaaddr), | |
1611 | ServiceStuff_Reg); | |
1612 | return 0; | |
1613 | } | |
1614 | ||
1615 | static inline void service_buffer_deallocate(struct lanai_dev *lanai) | |
1616 | { | |
1617 | lanai_buf_deallocate(&lanai->service, lanai->pci); | |
1618 | } | |
1619 | ||
1620 | /* Bitfields in service list */ | |
1621 | #define SERVICE_TX (0x80000000) /* Was from transmission */ | |
1622 | #define SERVICE_TRASH (0x40000000) /* RXed PDU was trashed */ | |
1623 | #define SERVICE_CRCERR (0x20000000) /* RXed PDU had CRC error */ | |
1624 | #define SERVICE_CI (0x10000000) /* RXed PDU had CI set */ | |
1625 | #define SERVICE_CLP (0x08000000) /* RXed PDU had CLP set */ | |
1626 | #define SERVICE_STREAM (0x04000000) /* RX Stream mode */ | |
1627 | #define SERVICE_GET_VCI(x) (((x)>>16)&0x3FF) | |
1628 | #define SERVICE_GET_END(x) ((x)&0x1FFF) | |
1629 | ||
1630 | /* Handle one thing from the service list - returns true if it marked a | |
1631 | * VCC ready for xmit | |
1632 | */ | |
1633 | static int handle_service(struct lanai_dev *lanai, u32 s) | |
1634 | { | |
1635 | vci_t vci = SERVICE_GET_VCI(s); | |
1636 | struct lanai_vcc *lvcc; | |
1637 | read_lock(&vcc_sklist_lock); | |
1638 | lvcc = lanai->vccs[vci]; | |
1639 | if (unlikely(lvcc == NULL)) { | |
1640 | read_unlock(&vcc_sklist_lock); | |
1641 | DPRINTK("(itf %d) got service entry 0x%X for nonexistent " | |
1642 | "vcc %d\n", lanai->number, (unsigned int) s, vci); | |
1643 | if (s & SERVICE_TX) | |
1644 | lanai->stats.service_notx++; | |
1645 | else | |
1646 | lanai->stats.service_norx++; | |
1647 | return 0; | |
1648 | } | |
1649 | if (s & SERVICE_TX) { /* segmentation interrupt */ | |
1650 | if (unlikely(lvcc->tx.atmvcc == NULL)) { | |
1651 | read_unlock(&vcc_sklist_lock); | |
1652 | DPRINTK("(itf %d) got service entry 0x%X for non-TX " | |
1653 | "vcc %d\n", lanai->number, (unsigned int) s, vci); | |
1654 | lanai->stats.service_notx++; | |
1655 | return 0; | |
1656 | } | |
1657 | __set_bit(vci, lanai->transmit_ready); | |
1658 | lvcc->tx.endptr = SERVICE_GET_END(s); | |
1659 | read_unlock(&vcc_sklist_lock); | |
1660 | return 1; | |
1661 | } | |
1662 | if (unlikely(lvcc->rx.atmvcc == NULL)) { | |
1663 | read_unlock(&vcc_sklist_lock); | |
1664 | DPRINTK("(itf %d) got service entry 0x%X for non-RX " | |
1665 | "vcc %d\n", lanai->number, (unsigned int) s, vci); | |
1666 | lanai->stats.service_norx++; | |
1667 | return 0; | |
1668 | } | |
1669 | if (unlikely(lvcc->rx.atmvcc->qos.aal != ATM_AAL5)) { | |
1670 | read_unlock(&vcc_sklist_lock); | |
1671 | DPRINTK("(itf %d) got RX service entry 0x%X for non-AAL5 " | |
1672 | "vcc %d\n", lanai->number, (unsigned int) s, vci); | |
1673 | lanai->stats.service_rxnotaal5++; | |
1674 | atomic_inc(&lvcc->rx.atmvcc->stats->rx_err); | |
1675 | return 0; | |
1676 | } | |
1677 | if (likely(!(s & (SERVICE_TRASH | SERVICE_STREAM | SERVICE_CRCERR)))) { | |
1678 | vcc_rx_aal5(lvcc, SERVICE_GET_END(s)); | |
1679 | read_unlock(&vcc_sklist_lock); | |
1680 | return 0; | |
1681 | } | |
1682 | if (s & SERVICE_TRASH) { | |
1683 | int bytes; | |
1684 | read_unlock(&vcc_sklist_lock); | |
1685 | DPRINTK("got trashed rx pdu on vci %d\n", vci); | |
1686 | atomic_inc(&lvcc->rx.atmvcc->stats->rx_err); | |
1687 | lvcc->stats.x.aal5.service_trash++; | |
1688 | bytes = (SERVICE_GET_END(s) * 16) - | |
1689 | (((unsigned long) lvcc->rx.buf.ptr) - | |
1690 | ((unsigned long) lvcc->rx.buf.start)) + 47; | |
1691 | if (bytes < 0) | |
1692 | bytes += lanai_buf_size(&lvcc->rx.buf); | |
1693 | lanai->stats.ovfl_trash += (bytes / 48); | |
1694 | return 0; | |
1695 | } | |
1696 | if (s & SERVICE_STREAM) { | |
1697 | read_unlock(&vcc_sklist_lock); | |
1698 | atomic_inc(&lvcc->rx.atmvcc->stats->rx_err); | |
1699 | lvcc->stats.x.aal5.service_stream++; | |
1700 | printk(KERN_ERR DEV_LABEL "(itf %d): Got AAL5 stream " | |
1701 | "PDU on VCI %d!\n", lanai->number, vci); | |
1702 | lanai_reset(lanai); | |
1703 | return 0; | |
1704 | } | |
1705 | DPRINTK("got rx crc error on vci %d\n", vci); | |
1706 | atomic_inc(&lvcc->rx.atmvcc->stats->rx_err); | |
1707 | lvcc->stats.x.aal5.service_rxcrc++; | |
1708 | lvcc->rx.buf.ptr = &lvcc->rx.buf.start[SERVICE_GET_END(s) * 4]; | |
1709 | cardvcc_write(lvcc, SERVICE_GET_END(s), vcc_rxreadptr); | |
1710 | read_unlock(&vcc_sklist_lock); | |
1711 | return 0; | |
1712 | } | |
1713 | ||
1714 | /* Try transmitting on all VCIs that we marked ready to serve */ | |
1715 | static void iter_transmit(struct lanai_dev *lanai, vci_t vci) | |
1716 | { | |
1717 | struct lanai_vcc *lvcc = lanai->vccs[vci]; | |
1718 | if (vcc_is_backlogged(lvcc)) | |
1719 | lvcc->tx.unqueue(lanai, lvcc, lvcc->tx.endptr); | |
1720 | } | |
1721 | ||
1722 | /* Run service queue -- called from interrupt context or with | |
1723 | * interrupts otherwise disabled and with the lanai->servicelock | |
1724 | * lock held | |
1725 | */ | |
1726 | static void run_service(struct lanai_dev *lanai) | |
1727 | { | |
1728 | int ntx = 0; | |
1729 | u32 wreg = reg_read(lanai, ServWrite_Reg); | |
1730 | const u32 *end = lanai->service.start + wreg; | |
1731 | while (lanai->service.ptr != end) { | |
1732 | ntx += handle_service(lanai, | |
1733 | le32_to_cpup(lanai->service.ptr++)); | |
1734 | if (lanai->service.ptr >= lanai->service.end) | |
1735 | lanai->service.ptr = lanai->service.start; | |
1736 | } | |
1737 | reg_write(lanai, wreg, ServRead_Reg); | |
1738 | if (ntx != 0) { | |
1739 | read_lock(&vcc_sklist_lock); | |
1740 | vci_bitfield_iterate(lanai, lanai->transmit_ready, | |
1741 | iter_transmit); | |
1742 | bitmap_zero(lanai->transmit_ready, NUM_VCI); | |
1743 | read_unlock(&vcc_sklist_lock); | |
1744 | } | |
1745 | } | |
1746 | ||
1747 | /* -------------------- GATHER STATISTICS: */ | |
1748 | ||
1749 | static void get_statistics(struct lanai_dev *lanai) | |
1750 | { | |
1751 | u32 statreg = reg_read(lanai, Statistics_Reg); | |
1752 | lanai->stats.atm_ovfl += STATS_GET_FIFO_OVFL(statreg); | |
1753 | lanai->stats.hec_err += STATS_GET_HEC_ERR(statreg); | |
1754 | lanai->stats.vci_trash += STATS_GET_BAD_VCI(statreg); | |
1755 | lanai->stats.ovfl_trash += STATS_GET_BUF_OVFL(statreg); | |
1756 | } | |
1757 | ||
1758 | /* -------------------- POLLING TIMER: */ | |
1759 | ||
1760 | #ifndef DEBUG_RW | |
1761 | /* Try to undequeue 1 backlogged vcc */ | |
1762 | static void iter_dequeue(struct lanai_dev *lanai, vci_t vci) | |
1763 | { | |
1764 | struct lanai_vcc *lvcc = lanai->vccs[vci]; | |
1765 | int endptr; | |
1766 | if (lvcc == NULL || lvcc->tx.atmvcc == NULL || | |
1767 | !vcc_is_backlogged(lvcc)) { | |
1768 | __clear_bit(vci, lanai->backlog_vccs); | |
1769 | return; | |
1770 | } | |
1771 | endptr = TXREADPTR_GET_PTR(cardvcc_read(lvcc, vcc_txreadptr)); | |
1772 | lvcc->tx.unqueue(lanai, lvcc, endptr); | |
1773 | } | |
1774 | #endif /* !DEBUG_RW */ | |
1775 | ||
1776 | static void lanai_timed_poll(unsigned long arg) | |
1777 | { | |
1778 | struct lanai_dev *lanai = (struct lanai_dev *) arg; | |
1779 | #ifndef DEBUG_RW | |
1780 | unsigned long flags; | |
1781 | #ifdef USE_POWERDOWN | |
1782 | if (lanai->conf1 & CONFIG1_POWERDOWN) | |
1783 | return; | |
1784 | #endif /* USE_POWERDOWN */ | |
1785 | local_irq_save(flags); | |
1786 | /* If we can grab the spinlock, check if any services need to be run */ | |
1787 | if (spin_trylock(&lanai->servicelock)) { | |
1788 | run_service(lanai); | |
1789 | spin_unlock(&lanai->servicelock); | |
1790 | } | |
1791 | /* ...and see if any backlogged VCs can make progress */ | |
1792 | /* unfortunately linux has no read_trylock() currently */ | |
1793 | read_lock(&vcc_sklist_lock); | |
1794 | vci_bitfield_iterate(lanai, lanai->backlog_vccs, iter_dequeue); | |
1795 | read_unlock(&vcc_sklist_lock); | |
1796 | local_irq_restore(flags); | |
1797 | ||
1798 | get_statistics(lanai); | |
1799 | #endif /* !DEBUG_RW */ | |
1800 | mod_timer(&lanai->timer, jiffies + LANAI_POLL_PERIOD); | |
1801 | } | |
1802 | ||
1803 | static inline void lanai_timed_poll_start(struct lanai_dev *lanai) | |
1804 | { | |
1805 | init_timer(&lanai->timer); | |
1806 | lanai->timer.expires = jiffies + LANAI_POLL_PERIOD; | |
1807 | lanai->timer.data = (unsigned long) lanai; | |
1808 | lanai->timer.function = lanai_timed_poll; | |
1809 | add_timer(&lanai->timer); | |
1810 | } | |
1811 | ||
1812 | static inline void lanai_timed_poll_stop(struct lanai_dev *lanai) | |
1813 | { | |
1814 | del_timer_sync(&lanai->timer); | |
1815 | } | |
1816 | ||
1817 | /* -------------------- INTERRUPT SERVICE: */ | |
1818 | ||
1819 | static inline void lanai_int_1(struct lanai_dev *lanai, u32 reason) | |
1820 | { | |
1821 | u32 ack = 0; | |
1822 | if (reason & INT_SERVICE) { | |
1823 | ack = INT_SERVICE; | |
1824 | spin_lock(&lanai->servicelock); | |
1825 | run_service(lanai); | |
1826 | spin_unlock(&lanai->servicelock); | |
1827 | } | |
1828 | if (reason & (INT_AAL0_STR | INT_AAL0)) { | |
1829 | ack |= reason & (INT_AAL0_STR | INT_AAL0); | |
1830 | vcc_rx_aal0(lanai); | |
1831 | } | |
1832 | /* The rest of the interrupts are pretty rare */ | |
1833 | if (ack == reason) | |
1834 | goto done; | |
1835 | if (reason & INT_STATS) { | |
1836 | reason &= ~INT_STATS; /* No need to ack */ | |
1837 | get_statistics(lanai); | |
1838 | } | |
1839 | if (reason & INT_STATUS) { | |
1840 | ack |= reason & INT_STATUS; | |
1841 | lanai_check_status(lanai); | |
1842 | } | |
1843 | if (unlikely(reason & INT_DMASHUT)) { | |
1844 | printk(KERN_ERR DEV_LABEL "(itf %d): driver error - DMA " | |
1845 | "shutdown, reason=0x%08X, address=0x%08X\n", | |
1846 | lanai->number, (unsigned int) (reason & INT_DMASHUT), | |
1847 | (unsigned int) reg_read(lanai, DMA_Addr_Reg)); | |
1848 | if (reason & INT_TABORTBM) { | |
1849 | lanai_reset(lanai); | |
1850 | return; | |
1851 | } | |
1852 | ack |= (reason & INT_DMASHUT); | |
1853 | printk(KERN_ERR DEV_LABEL "(itf %d): re-enabling DMA\n", | |
1854 | lanai->number); | |
1855 | conf1_write(lanai); | |
1856 | lanai->stats.dma_reenable++; | |
1857 | pcistatus_check(lanai, 0); | |
1858 | } | |
1859 | if (unlikely(reason & INT_TABORTSENT)) { | |
1860 | ack |= (reason & INT_TABORTSENT); | |
1861 | printk(KERN_ERR DEV_LABEL "(itf %d): sent PCI target abort\n", | |
1862 | lanai->number); | |
1863 | pcistatus_check(lanai, 0); | |
1864 | } | |
1865 | if (unlikely(reason & INT_SEGSHUT)) { | |
1866 | printk(KERN_ERR DEV_LABEL "(itf %d): driver error - " | |
1867 | "segmentation shutdown, reason=0x%08X\n", lanai->number, | |
1868 | (unsigned int) (reason & INT_SEGSHUT)); | |
1869 | lanai_reset(lanai); | |
1870 | return; | |
1871 | } | |
1872 | if (unlikely(reason & (INT_PING | INT_WAKE))) { | |
1873 | printk(KERN_ERR DEV_LABEL "(itf %d): driver error - " | |
1874 | "unexpected interrupt 0x%08X, resetting\n", | |
1875 | lanai->number, | |
1876 | (unsigned int) (reason & (INT_PING | INT_WAKE))); | |
1877 | lanai_reset(lanai); | |
1878 | return; | |
1879 | } | |
1880 | #ifdef DEBUG | |
1881 | if (unlikely(ack != reason)) { | |
1882 | DPRINTK("unacked ints: 0x%08X\n", | |
1883 | (unsigned int) (reason & ~ack)); | |
1884 | ack = reason; | |
1885 | } | |
1886 | #endif | |
1887 | done: | |
1888 | if (ack != 0) | |
1889 | reg_write(lanai, ack, IntAck_Reg); | |
1890 | } | |
1891 | ||
7d12e780 | 1892 | static irqreturn_t lanai_int(int irq, void *devid) |
1da177e4 | 1893 | { |
c7bec5ab | 1894 | struct lanai_dev *lanai = devid; |
1da177e4 LT |
1895 | u32 reason; |
1896 | ||
1da177e4 LT |
1897 | #ifdef USE_POWERDOWN |
1898 | /* | |
1899 | * If we're powered down we shouldn't be generating any interrupts - | |
1900 | * so assume that this is a shared interrupt line and it's for someone | |
1901 | * else | |
1902 | */ | |
1903 | if (unlikely(lanai->conf1 & CONFIG1_POWERDOWN)) | |
1904 | return IRQ_NONE; | |
1905 | #endif | |
1906 | ||
1907 | reason = intr_pending(lanai); | |
1908 | if (reason == 0) | |
1909 | return IRQ_NONE; /* Must be for someone else */ | |
1910 | ||
1911 | do { | |
1912 | if (unlikely(reason == 0xFFFFFFFF)) | |
1913 | break; /* Maybe we've been unplugged? */ | |
1914 | lanai_int_1(lanai, reason); | |
1915 | reason = intr_pending(lanai); | |
1916 | } while (reason != 0); | |
1917 | ||
1918 | return IRQ_HANDLED; | |
1919 | } | |
1920 | ||
1921 | /* TODO - it would be nice if we could use the "delayed interrupt" system | |
1922 | * to some advantage | |
1923 | */ | |
1924 | ||
1925 | /* -------------------- CHECK BOARD ID/REV: */ | |
1926 | ||
1927 | /* | |
1928 | * The board id and revision are stored both in the reset register and | |
1929 | * in the PCI configuration space - the documentation says to check | |
1930 | * each of them. If revp!=NULL we store the revision there | |
1931 | */ | |
1932 | static int check_board_id_and_rev(const char *name, u32 val, int *revp) | |
1933 | { | |
1934 | DPRINTK("%s says board_id=%d, board_rev=%d\n", name, | |
1935 | (int) RESET_GET_BOARD_ID(val), | |
1936 | (int) RESET_GET_BOARD_REV(val)); | |
1937 | if (RESET_GET_BOARD_ID(val) != BOARD_ID_LANAI256) { | |
1938 | printk(KERN_ERR DEV_LABEL ": Found %s board-id %d -- not a " | |
1939 | "Lanai 25.6\n", name, (int) RESET_GET_BOARD_ID(val)); | |
1940 | return -ENODEV; | |
1941 | } | |
1942 | if (revp != NULL) | |
1943 | *revp = RESET_GET_BOARD_REV(val); | |
1944 | return 0; | |
1945 | } | |
1946 | ||
1947 | /* -------------------- PCI INITIALIZATION/SHUTDOWN: */ | |
1948 | ||
1949 | static int __devinit lanai_pci_start(struct lanai_dev *lanai) | |
1950 | { | |
1951 | struct pci_dev *pci = lanai->pci; | |
1952 | int result; | |
1953 | u16 w; | |
1954 | ||
1955 | if (pci_enable_device(pci) != 0) { | |
1956 | printk(KERN_ERR DEV_LABEL "(itf %d): can't enable " | |
1957 | "PCI device", lanai->number); | |
1958 | return -ENXIO; | |
1959 | } | |
1960 | pci_set_master(pci); | |
1961 | if (pci_set_dma_mask(pci, DMA_32BIT_MASK) != 0) { | |
1962 | printk(KERN_WARNING DEV_LABEL | |
1963 | "(itf %d): No suitable DMA available.\n", lanai->number); | |
1964 | return -EBUSY; | |
1965 | } | |
910638ae | 1966 | if (pci_set_consistent_dma_mask(pci, DMA_32BIT_MASK) != 0) { |
1da177e4 LT |
1967 | printk(KERN_WARNING DEV_LABEL |
1968 | "(itf %d): No suitable DMA available.\n", lanai->number); | |
1969 | return -EBUSY; | |
1970 | } | |
1da177e4 LT |
1971 | result = pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &w); |
1972 | if (result != PCIBIOS_SUCCESSFUL) { | |
1973 | printk(KERN_ERR DEV_LABEL "(itf %d): can't read " | |
1974 | "PCI_SUBSYSTEM_ID: %d\n", lanai->number, result); | |
1975 | return -EINVAL; | |
1976 | } | |
1977 | result = check_board_id_and_rev("PCI", w, NULL); | |
1978 | if (result != 0) | |
1979 | return result; | |
1980 | /* Set latency timer to zero as per lanai docs */ | |
1981 | result = pci_write_config_byte(pci, PCI_LATENCY_TIMER, 0); | |
1982 | if (result != PCIBIOS_SUCCESSFUL) { | |
1983 | printk(KERN_ERR DEV_LABEL "(itf %d): can't write " | |
1984 | "PCI_LATENCY_TIMER: %d\n", lanai->number, result); | |
1985 | return -EINVAL; | |
1986 | } | |
1987 | pcistatus_check(lanai, 1); | |
1988 | pcistatus_check(lanai, 0); | |
1989 | return 0; | |
1990 | } | |
1991 | ||
1992 | /* -------------------- VPI/VCI ALLOCATION: */ | |
1993 | ||
1994 | /* | |
1995 | * We _can_ use VCI==0 for normal traffic, but only for UBR (or we'll | |
1996 | * get a CBRZERO interrupt), and we can use it only if noone is receiving | |
1997 | * AAL0 traffic (since they will use the same queue) - according to the | |
1998 | * docs we shouldn't even use it for AAL0 traffic | |
1999 | */ | |
2000 | static inline int vci0_is_ok(struct lanai_dev *lanai, | |
2001 | const struct atm_qos *qos) | |
2002 | { | |
2003 | if (qos->txtp.traffic_class == ATM_CBR || qos->aal == ATM_AAL0) | |
2004 | return 0; | |
2005 | if (qos->rxtp.traffic_class != ATM_NONE) { | |
2006 | if (lanai->naal0 != 0) | |
2007 | return 0; | |
2008 | lanai->conf2 |= CONFIG2_VCI0_NORMAL; | |
2009 | conf2_write_if_powerup(lanai); | |
2010 | } | |
2011 | return 1; | |
2012 | } | |
2013 | ||
2014 | /* return true if vci is currently unused, or if requested qos is | |
2015 | * compatible | |
2016 | */ | |
2017 | static int vci_is_ok(struct lanai_dev *lanai, vci_t vci, | |
2018 | const struct atm_vcc *atmvcc) | |
2019 | { | |
2020 | const struct atm_qos *qos = &atmvcc->qos; | |
2021 | const struct lanai_vcc *lvcc = lanai->vccs[vci]; | |
2022 | if (vci == 0 && !vci0_is_ok(lanai, qos)) | |
2023 | return 0; | |
2024 | if (unlikely(lvcc != NULL)) { | |
2025 | if (qos->rxtp.traffic_class != ATM_NONE && | |
2026 | lvcc->rx.atmvcc != NULL && lvcc->rx.atmvcc != atmvcc) | |
2027 | return 0; | |
2028 | if (qos->txtp.traffic_class != ATM_NONE && | |
2029 | lvcc->tx.atmvcc != NULL && lvcc->tx.atmvcc != atmvcc) | |
2030 | return 0; | |
2031 | if (qos->txtp.traffic_class == ATM_CBR && | |
2032 | lanai->cbrvcc != NULL && lanai->cbrvcc != atmvcc) | |
2033 | return 0; | |
2034 | } | |
2035 | if (qos->aal == ATM_AAL0 && lanai->naal0 == 0 && | |
2036 | qos->rxtp.traffic_class != ATM_NONE) { | |
2037 | const struct lanai_vcc *vci0 = lanai->vccs[0]; | |
2038 | if (vci0 != NULL && vci0->rx.atmvcc != NULL) | |
2039 | return 0; | |
2040 | lanai->conf2 &= ~CONFIG2_VCI0_NORMAL; | |
2041 | conf2_write_if_powerup(lanai); | |
2042 | } | |
2043 | return 1; | |
2044 | } | |
2045 | ||
2046 | static int lanai_normalize_ci(struct lanai_dev *lanai, | |
2047 | const struct atm_vcc *atmvcc, short *vpip, vci_t *vcip) | |
2048 | { | |
2049 | switch (*vpip) { | |
2050 | case ATM_VPI_ANY: | |
2051 | *vpip = 0; | |
2052 | /* FALLTHROUGH */ | |
2053 | case 0: | |
2054 | break; | |
2055 | default: | |
2056 | return -EADDRINUSE; | |
2057 | } | |
2058 | switch (*vcip) { | |
2059 | case ATM_VCI_ANY: | |
2060 | for (*vcip = ATM_NOT_RSV_VCI; *vcip < lanai->num_vci; | |
2061 | (*vcip)++) | |
2062 | if (vci_is_ok(lanai, *vcip, atmvcc)) | |
2063 | return 0; | |
2064 | return -EADDRINUSE; | |
2065 | default: | |
2066 | if (*vcip >= lanai->num_vci || *vcip < 0 || | |
2067 | !vci_is_ok(lanai, *vcip, atmvcc)) | |
2068 | return -EADDRINUSE; | |
2069 | } | |
2070 | return 0; | |
2071 | } | |
2072 | ||
2073 | /* -------------------- MANAGE CBR: */ | |
2074 | ||
2075 | /* | |
2076 | * CBR ICG is stored as a fixed-point number with 4 fractional bits. | |
2077 | * Note that storing a number greater than 2046.0 will result in | |
2078 | * incorrect shaping | |
2079 | */ | |
2080 | #define CBRICG_FRAC_BITS (4) | |
2081 | #define CBRICG_MAX (2046 << CBRICG_FRAC_BITS) | |
2082 | ||
2083 | /* | |
2084 | * ICG is related to PCR with the formula PCR = MAXPCR / (ICG + 1) | |
2085 | * where MAXPCR is (according to the docs) 25600000/(54*8), | |
2086 | * which is equal to (3125<<9)/27. | |
2087 | * | |
2088 | * Solving for ICG, we get: | |
2089 | * ICG = MAXPCR/PCR - 1 | |
2090 | * ICG = (3125<<9)/(27*PCR) - 1 | |
2091 | * ICG = ((3125<<9) - (27*PCR)) / (27*PCR) | |
2092 | * | |
2093 | * The end result is supposed to be a fixed-point number with FRAC_BITS | |
2094 | * bits of a fractional part, so we keep everything in the numerator | |
2095 | * shifted by that much as we compute | |
2096 | * | |
2097 | */ | |
c22c28f6 | 2098 | static int pcr_to_cbricg(const struct atm_qos *qos) |
1da177e4 LT |
2099 | { |
2100 | int rounddown = 0; /* 1 = Round PCR down, i.e. round ICG _up_ */ | |
2101 | int x, icg, pcr = atm_pcr_goal(&qos->txtp); | |
2102 | if (pcr == 0) /* Use maximum bandwidth */ | |
2103 | return 0; | |
2104 | if (pcr < 0) { | |
2105 | rounddown = 1; | |
2106 | pcr = -pcr; | |
2107 | } | |
2108 | x = pcr * 27; | |
2109 | icg = (3125 << (9 + CBRICG_FRAC_BITS)) - (x << CBRICG_FRAC_BITS); | |
2110 | if (rounddown) | |
2111 | icg += x - 1; | |
2112 | icg /= x; | |
2113 | if (icg > CBRICG_MAX) | |
2114 | icg = CBRICG_MAX; | |
2115 | DPRINTK("pcr_to_cbricg: pcr=%d rounddown=%c icg=%d\n", | |
2116 | pcr, rounddown ? 'Y' : 'N', icg); | |
2117 | return icg; | |
2118 | } | |
2119 | ||
2120 | static inline void lanai_cbr_setup(struct lanai_dev *lanai) | |
2121 | { | |
2122 | reg_write(lanai, pcr_to_cbricg(&lanai->cbrvcc->qos), CBR_ICG_Reg); | |
2123 | reg_write(lanai, lanai->cbrvcc->vci, CBR_PTR_Reg); | |
2124 | lanai->conf2 |= CONFIG2_CBR_ENABLE; | |
2125 | conf2_write(lanai); | |
2126 | } | |
2127 | ||
2128 | static inline void lanai_cbr_shutdown(struct lanai_dev *lanai) | |
2129 | { | |
2130 | lanai->conf2 &= ~CONFIG2_CBR_ENABLE; | |
2131 | conf2_write(lanai); | |
2132 | } | |
2133 | ||
2134 | /* -------------------- OPERATIONS: */ | |
2135 | ||
2136 | /* setup a newly detected device */ | |
2137 | static int __devinit lanai_dev_open(struct atm_dev *atmdev) | |
2138 | { | |
2139 | struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data; | |
2140 | unsigned long raw_base; | |
2141 | int result; | |
2142 | ||
2143 | DPRINTK("In lanai_dev_open()\n"); | |
2144 | /* Basic device fields */ | |
2145 | lanai->number = atmdev->number; | |
2146 | lanai->num_vci = NUM_VCI; | |
2147 | bitmap_zero(lanai->backlog_vccs, NUM_VCI); | |
2148 | bitmap_zero(lanai->transmit_ready, NUM_VCI); | |
2149 | lanai->naal0 = 0; | |
2150 | #ifdef USE_POWERDOWN | |
2151 | lanai->nbound = 0; | |
2152 | #endif | |
2153 | lanai->cbrvcc = NULL; | |
2154 | memset(&lanai->stats, 0, sizeof lanai->stats); | |
2155 | spin_lock_init(&lanai->endtxlock); | |
2156 | spin_lock_init(&lanai->servicelock); | |
2157 | atmdev->ci_range.vpi_bits = 0; | |
2158 | atmdev->ci_range.vci_bits = 0; | |
2159 | while (1 << atmdev->ci_range.vci_bits < lanai->num_vci) | |
2160 | atmdev->ci_range.vci_bits++; | |
2161 | atmdev->link_rate = ATM_25_PCR; | |
2162 | ||
2163 | /* 3.2: PCI initialization */ | |
2164 | if ((result = lanai_pci_start(lanai)) != 0) | |
2165 | goto error; | |
2166 | raw_base = lanai->pci->resource[0].start; | |
2167 | lanai->base = (bus_addr_t) ioremap(raw_base, LANAI_MAPPING_SIZE); | |
2168 | if (lanai->base == NULL) { | |
2169 | printk(KERN_ERR DEV_LABEL ": couldn't remap I/O space\n"); | |
2170 | goto error_pci; | |
2171 | } | |
2172 | /* 3.3: Reset lanai and PHY */ | |
2173 | reset_board(lanai); | |
2174 | lanai->conf1 = reg_read(lanai, Config1_Reg); | |
2175 | lanai->conf1 &= ~(CONFIG1_GPOUT1 | CONFIG1_POWERDOWN | | |
2176 | CONFIG1_MASK_LEDMODE); | |
2177 | lanai->conf1 |= CONFIG1_SET_LEDMODE(LEDMODE_NOT_SOOL); | |
2178 | reg_write(lanai, lanai->conf1 | CONFIG1_GPOUT1, Config1_Reg); | |
2179 | udelay(1000); | |
2180 | conf1_write(lanai); | |
2181 | ||
2182 | /* | |
2183 | * 3.4: Turn on endian mode for big-endian hardware | |
2184 | * We don't actually want to do this - the actual bit fields | |
2185 | * in the endian register are not documented anywhere. | |
2186 | * Instead we do the bit-flipping ourselves on big-endian | |
2187 | * hardware. | |
2188 | * | |
2189 | * 3.5: get the board ID/rev by reading the reset register | |
2190 | */ | |
2191 | result = check_board_id_and_rev("register", | |
2192 | reg_read(lanai, Reset_Reg), &lanai->board_rev); | |
2193 | if (result != 0) | |
2194 | goto error_unmap; | |
2195 | ||
2196 | /* 3.6: read EEPROM */ | |
2197 | if ((result = eeprom_read(lanai)) != 0) | |
2198 | goto error_unmap; | |
2199 | if ((result = eeprom_validate(lanai)) != 0) | |
2200 | goto error_unmap; | |
2201 | ||
2202 | /* 3.7: re-reset PHY, do loopback tests, setup PHY */ | |
2203 | reg_write(lanai, lanai->conf1 | CONFIG1_GPOUT1, Config1_Reg); | |
2204 | udelay(1000); | |
2205 | conf1_write(lanai); | |
2206 | /* TODO - loopback tests */ | |
2207 | lanai->conf1 |= (CONFIG1_GPOUT2 | CONFIG1_GPOUT3 | CONFIG1_DMA_ENABLE); | |
2208 | conf1_write(lanai); | |
2209 | ||
2210 | /* 3.8/3.9: test and initialize card SRAM */ | |
2211 | if ((result = sram_test_and_clear(lanai)) != 0) | |
2212 | goto error_unmap; | |
2213 | ||
2214 | /* 3.10: initialize lanai registers */ | |
2215 | lanai->conf1 |= CONFIG1_DMA_ENABLE; | |
2216 | conf1_write(lanai); | |
2217 | if ((result = service_buffer_allocate(lanai)) != 0) | |
2218 | goto error_unmap; | |
2219 | if ((result = vcc_table_allocate(lanai)) != 0) | |
2220 | goto error_service; | |
2221 | lanai->conf2 = (lanai->num_vci >= 512 ? CONFIG2_HOWMANY : 0) | | |
2222 | CONFIG2_HEC_DROP | /* ??? */ CONFIG2_PTI7_MODE; | |
2223 | conf2_write(lanai); | |
2224 | reg_write(lanai, TX_FIFO_DEPTH, TxDepth_Reg); | |
2225 | reg_write(lanai, 0, CBR_ICG_Reg); /* CBR defaults to no limit */ | |
dace1453 | 2226 | if ((result = request_irq(lanai->pci->irq, lanai_int, IRQF_SHARED, |
1da177e4 LT |
2227 | DEV_LABEL, lanai)) != 0) { |
2228 | printk(KERN_ERR DEV_LABEL ": can't allocate interrupt\n"); | |
2229 | goto error_vcctable; | |
2230 | } | |
2231 | mb(); /* Make sure that all that made it */ | |
2232 | intr_enable(lanai, INT_ALL & ~(INT_PING | INT_WAKE)); | |
2233 | /* 3.11: initialize loop mode (i.e. turn looping off) */ | |
2234 | lanai->conf1 = (lanai->conf1 & ~CONFIG1_MASK_LOOPMODE) | | |
2235 | CONFIG1_SET_LOOPMODE(LOOPMODE_NORMAL) | | |
2236 | CONFIG1_GPOUT2 | CONFIG1_GPOUT3; | |
2237 | conf1_write(lanai); | |
2238 | lanai->status = reg_read(lanai, Status_Reg); | |
2239 | /* We're now done initializing this card */ | |
2240 | #ifdef USE_POWERDOWN | |
2241 | lanai->conf1 |= CONFIG1_POWERDOWN; | |
2242 | conf1_write(lanai); | |
2243 | #endif | |
2244 | memcpy(atmdev->esi, eeprom_mac(lanai), ESI_LEN); | |
2245 | lanai_timed_poll_start(lanai); | |
2246 | printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d, base=0x%lx, irq=%u " | |
2247 | "(%02X-%02X-%02X-%02X-%02X-%02X)\n", lanai->number, | |
44c10138 | 2248 | (int) lanai->pci->revision, (unsigned long) lanai->base, |
1da177e4 LT |
2249 | lanai->pci->irq, |
2250 | atmdev->esi[0], atmdev->esi[1], atmdev->esi[2], | |
2251 | atmdev->esi[3], atmdev->esi[4], atmdev->esi[5]); | |
2252 | printk(KERN_NOTICE DEV_LABEL "(itf %d): LANAI%s, serialno=%u(0x%X), " | |
2253 | "board_rev=%d\n", lanai->number, | |
2254 | lanai->type==lanai2 ? "2" : "HB", (unsigned int) lanai->serialno, | |
2255 | (unsigned int) lanai->serialno, lanai->board_rev); | |
2256 | return 0; | |
2257 | ||
2258 | error_vcctable: | |
2259 | vcc_table_deallocate(lanai); | |
2260 | error_service: | |
2261 | service_buffer_deallocate(lanai); | |
2262 | error_unmap: | |
2263 | reset_board(lanai); | |
2264 | #ifdef USE_POWERDOWN | |
2265 | lanai->conf1 = reg_read(lanai, Config1_Reg) | CONFIG1_POWERDOWN; | |
2266 | conf1_write(lanai); | |
2267 | #endif | |
2268 | iounmap(lanai->base); | |
2269 | error_pci: | |
2270 | pci_disable_device(lanai->pci); | |
2271 | error: | |
2272 | return result; | |
2273 | } | |
2274 | ||
2275 | /* called when device is being shutdown, and all vcc's are gone - higher | |
2276 | * levels will deallocate the atm device for us | |
2277 | */ | |
2278 | static void lanai_dev_close(struct atm_dev *atmdev) | |
2279 | { | |
2280 | struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data; | |
2281 | printk(KERN_INFO DEV_LABEL "(itf %d): shutting down interface\n", | |
2282 | lanai->number); | |
2283 | lanai_timed_poll_stop(lanai); | |
2284 | #ifdef USE_POWERDOWN | |
2285 | lanai->conf1 = reg_read(lanai, Config1_Reg) & ~CONFIG1_POWERDOWN; | |
2286 | conf1_write(lanai); | |
2287 | #endif | |
2288 | intr_disable(lanai, INT_ALL); | |
2289 | free_irq(lanai->pci->irq, lanai); | |
2290 | reset_board(lanai); | |
2291 | #ifdef USE_POWERDOWN | |
2292 | lanai->conf1 |= CONFIG1_POWERDOWN; | |
2293 | conf1_write(lanai); | |
2294 | #endif | |
2295 | pci_disable_device(lanai->pci); | |
2296 | vcc_table_deallocate(lanai); | |
2297 | service_buffer_deallocate(lanai); | |
2298 | iounmap(lanai->base); | |
2299 | kfree(lanai); | |
2300 | } | |
2301 | ||
2302 | /* close a vcc */ | |
2303 | static void lanai_close(struct atm_vcc *atmvcc) | |
2304 | { | |
2305 | struct lanai_vcc *lvcc = (struct lanai_vcc *) atmvcc->dev_data; | |
2306 | struct lanai_dev *lanai = (struct lanai_dev *) atmvcc->dev->dev_data; | |
2307 | if (lvcc == NULL) | |
2308 | return; | |
2309 | clear_bit(ATM_VF_READY, &atmvcc->flags); | |
2310 | clear_bit(ATM_VF_PARTIAL, &atmvcc->flags); | |
2311 | if (lvcc->rx.atmvcc == atmvcc) { | |
2312 | lanai_shutdown_rx_vci(lvcc); | |
2313 | if (atmvcc->qos.aal == ATM_AAL0) { | |
2314 | if (--lanai->naal0 <= 0) | |
2315 | aal0_buffer_free(lanai); | |
2316 | } else | |
2317 | lanai_buf_deallocate(&lvcc->rx.buf, lanai->pci); | |
2318 | lvcc->rx.atmvcc = NULL; | |
2319 | } | |
2320 | if (lvcc->tx.atmvcc == atmvcc) { | |
2321 | if (atmvcc == lanai->cbrvcc) { | |
2322 | if (lvcc->vbase != NULL) | |
2323 | lanai_cbr_shutdown(lanai); | |
2324 | lanai->cbrvcc = NULL; | |
2325 | } | |
2326 | lanai_shutdown_tx_vci(lanai, lvcc); | |
2327 | lanai_buf_deallocate(&lvcc->tx.buf, lanai->pci); | |
2328 | lvcc->tx.atmvcc = NULL; | |
2329 | } | |
2330 | if (--lvcc->nref == 0) { | |
2331 | host_vcc_unbind(lanai, lvcc); | |
2332 | kfree(lvcc); | |
2333 | } | |
2334 | atmvcc->dev_data = NULL; | |
2335 | clear_bit(ATM_VF_ADDR, &atmvcc->flags); | |
2336 | } | |
2337 | ||
2338 | /* open a vcc on the card to vpi/vci */ | |
2339 | static int lanai_open(struct atm_vcc *atmvcc) | |
2340 | { | |
2341 | struct lanai_dev *lanai; | |
2342 | struct lanai_vcc *lvcc; | |
2343 | int result = 0; | |
2344 | int vci = atmvcc->vci; | |
2345 | short vpi = atmvcc->vpi; | |
2346 | /* we don't support partial open - it's not really useful anyway */ | |
2347 | if ((test_bit(ATM_VF_PARTIAL, &atmvcc->flags)) || | |
2348 | (vpi == ATM_VPI_UNSPEC) || (vci == ATM_VCI_UNSPEC)) | |
2349 | return -EINVAL; | |
2350 | lanai = (struct lanai_dev *) atmvcc->dev->dev_data; | |
2351 | result = lanai_normalize_ci(lanai, atmvcc, &vpi, &vci); | |
2352 | if (unlikely(result != 0)) | |
2353 | goto out; | |
2354 | set_bit(ATM_VF_ADDR, &atmvcc->flags); | |
2355 | if (atmvcc->qos.aal != ATM_AAL0 && atmvcc->qos.aal != ATM_AAL5) | |
2356 | return -EINVAL; | |
2357 | DPRINTK(DEV_LABEL "(itf %d): open %d.%d\n", lanai->number, | |
2358 | (int) vpi, vci); | |
2359 | lvcc = lanai->vccs[vci]; | |
2360 | if (lvcc == NULL) { | |
2361 | lvcc = new_lanai_vcc(); | |
2362 | if (unlikely(lvcc == NULL)) | |
2363 | return -ENOMEM; | |
2364 | atmvcc->dev_data = lvcc; | |
2365 | } | |
2366 | lvcc->nref++; | |
2367 | if (atmvcc->qos.rxtp.traffic_class != ATM_NONE) { | |
2368 | APRINTK(lvcc->rx.atmvcc == NULL, "rx.atmvcc!=NULL, vci=%d\n", | |
2369 | vci); | |
2370 | if (atmvcc->qos.aal == ATM_AAL0) { | |
2371 | if (lanai->naal0 == 0) | |
2372 | result = aal0_buffer_allocate(lanai); | |
2373 | } else | |
2374 | result = lanai_setup_rx_vci_aal5( | |
2375 | lanai, lvcc, &atmvcc->qos); | |
2376 | if (unlikely(result != 0)) | |
2377 | goto out_free; | |
2378 | lvcc->rx.atmvcc = atmvcc; | |
2379 | lvcc->stats.rx_nomem = 0; | |
2380 | lvcc->stats.x.aal5.rx_badlen = 0; | |
2381 | lvcc->stats.x.aal5.service_trash = 0; | |
2382 | lvcc->stats.x.aal5.service_stream = 0; | |
2383 | lvcc->stats.x.aal5.service_rxcrc = 0; | |
2384 | if (atmvcc->qos.aal == ATM_AAL0) | |
2385 | lanai->naal0++; | |
2386 | } | |
2387 | if (atmvcc->qos.txtp.traffic_class != ATM_NONE) { | |
2388 | APRINTK(lvcc->tx.atmvcc == NULL, "tx.atmvcc!=NULL, vci=%d\n", | |
2389 | vci); | |
2390 | result = lanai_setup_tx_vci(lanai, lvcc, &atmvcc->qos); | |
2391 | if (unlikely(result != 0)) | |
2392 | goto out_free; | |
2393 | lvcc->tx.atmvcc = atmvcc; | |
2394 | if (atmvcc->qos.txtp.traffic_class == ATM_CBR) { | |
2395 | APRINTK(lanai->cbrvcc == NULL, | |
2396 | "cbrvcc!=NULL, vci=%d\n", vci); | |
2397 | lanai->cbrvcc = atmvcc; | |
2398 | } | |
2399 | } | |
2400 | host_vcc_bind(lanai, lvcc, vci); | |
2401 | /* | |
2402 | * Make sure everything made it to RAM before we tell the card about | |
2403 | * the VCC | |
2404 | */ | |
2405 | wmb(); | |
2406 | if (atmvcc == lvcc->rx.atmvcc) | |
2407 | host_vcc_start_rx(lvcc); | |
2408 | if (atmvcc == lvcc->tx.atmvcc) { | |
2409 | host_vcc_start_tx(lvcc); | |
2410 | if (lanai->cbrvcc == atmvcc) | |
2411 | lanai_cbr_setup(lanai); | |
2412 | } | |
2413 | set_bit(ATM_VF_READY, &atmvcc->flags); | |
2414 | return 0; | |
2415 | out_free: | |
2416 | lanai_close(atmvcc); | |
2417 | out: | |
2418 | return result; | |
2419 | } | |
2420 | ||
1da177e4 LT |
2421 | static int lanai_send(struct atm_vcc *atmvcc, struct sk_buff *skb) |
2422 | { | |
2423 | struct lanai_vcc *lvcc = (struct lanai_vcc *) atmvcc->dev_data; | |
2424 | struct lanai_dev *lanai = (struct lanai_dev *) atmvcc->dev->dev_data; | |
2425 | unsigned long flags; | |
2426 | if (unlikely(lvcc == NULL || lvcc->vbase == NULL || | |
2427 | lvcc->tx.atmvcc != atmvcc)) | |
2428 | goto einval; | |
2429 | #ifdef DEBUG | |
2430 | if (unlikely(skb == NULL)) { | |
2431 | DPRINTK("lanai_send: skb==NULL for vci=%d\n", atmvcc->vci); | |
2432 | goto einval; | |
2433 | } | |
2434 | if (unlikely(lanai == NULL)) { | |
2435 | DPRINTK("lanai_send: lanai==NULL for vci=%d\n", atmvcc->vci); | |
2436 | goto einval; | |
2437 | } | |
2438 | #endif | |
2439 | ATM_SKB(skb)->vcc = atmvcc; | |
2440 | switch (atmvcc->qos.aal) { | |
2441 | case ATM_AAL5: | |
2442 | read_lock_irqsave(&vcc_sklist_lock, flags); | |
2443 | vcc_tx_aal5(lanai, lvcc, skb); | |
2444 | read_unlock_irqrestore(&vcc_sklist_lock, flags); | |
2445 | return 0; | |
2446 | case ATM_AAL0: | |
2447 | if (unlikely(skb->len != ATM_CELL_SIZE-1)) | |
2448 | goto einval; | |
2449 | /* NOTE - this next line is technically invalid - we haven't unshared skb */ | |
2450 | cpu_to_be32s((u32 *) skb->data); | |
2451 | read_lock_irqsave(&vcc_sklist_lock, flags); | |
2452 | vcc_tx_aal0(lanai, lvcc, skb); | |
2453 | read_unlock_irqrestore(&vcc_sklist_lock, flags); | |
2454 | return 0; | |
2455 | } | |
2456 | DPRINTK("lanai_send: bad aal=%d on vci=%d\n", (int) atmvcc->qos.aal, | |
2457 | atmvcc->vci); | |
2458 | einval: | |
2459 | lanai_free_skb(atmvcc, skb); | |
2460 | return -EINVAL; | |
2461 | } | |
2462 | ||
2463 | static int lanai_change_qos(struct atm_vcc *atmvcc, | |
2464 | /*const*/ struct atm_qos *qos, int flags) | |
2465 | { | |
2466 | return -EBUSY; /* TODO: need to write this */ | |
2467 | } | |
2468 | ||
2469 | #ifndef CONFIG_PROC_FS | |
2470 | #define lanai_proc_read NULL | |
2471 | #else | |
2472 | static int lanai_proc_read(struct atm_dev *atmdev, loff_t *pos, char *page) | |
2473 | { | |
2474 | struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data; | |
2475 | loff_t left = *pos; | |
2476 | struct lanai_vcc *lvcc; | |
2477 | if (left-- == 0) | |
2478 | return sprintf(page, DEV_LABEL "(itf %d): chip=LANAI%s, " | |
2479 | "serial=%u, magic=0x%08X, num_vci=%d\n", | |
2480 | atmdev->number, lanai->type==lanai2 ? "2" : "HB", | |
2481 | (unsigned int) lanai->serialno, | |
2482 | (unsigned int) lanai->magicno, lanai->num_vci); | |
2483 | if (left-- == 0) | |
2484 | return sprintf(page, "revision: board=%d, pci_if=%d\n", | |
44c10138 | 2485 | lanai->board_rev, (int) lanai->pci->revision); |
1da177e4 LT |
2486 | if (left-- == 0) |
2487 | return sprintf(page, "EEPROM ESI: " | |
2488 | "%02X:%02X:%02X:%02X:%02X:%02X\n", | |
2489 | lanai->eeprom[EEPROM_MAC + 0], | |
2490 | lanai->eeprom[EEPROM_MAC + 1], | |
2491 | lanai->eeprom[EEPROM_MAC + 2], | |
2492 | lanai->eeprom[EEPROM_MAC + 3], | |
2493 | lanai->eeprom[EEPROM_MAC + 4], | |
2494 | lanai->eeprom[EEPROM_MAC + 5]); | |
2495 | if (left-- == 0) | |
2496 | return sprintf(page, "status: SOOL=%d, LOCD=%d, LED=%d, " | |
2497 | "GPIN=%d\n", (lanai->status & STATUS_SOOL) ? 1 : 0, | |
2498 | (lanai->status & STATUS_LOCD) ? 1 : 0, | |
2499 | (lanai->status & STATUS_LED) ? 1 : 0, | |
2500 | (lanai->status & STATUS_GPIN) ? 1 : 0); | |
2501 | if (left-- == 0) | |
2502 | return sprintf(page, "global buffer sizes: service=%Zu, " | |
2503 | "aal0_rx=%Zu\n", lanai_buf_size(&lanai->service), | |
2504 | lanai->naal0 ? lanai_buf_size(&lanai->aal0buf) : 0); | |
2505 | if (left-- == 0) { | |
2506 | get_statistics(lanai); | |
2507 | return sprintf(page, "cells in error: overflow=%u, " | |
2508 | "closed_vci=%u, bad_HEC=%u, rx_fifo=%u\n", | |
2509 | lanai->stats.ovfl_trash, lanai->stats.vci_trash, | |
2510 | lanai->stats.hec_err, lanai->stats.atm_ovfl); | |
2511 | } | |
2512 | if (left-- == 0) | |
2513 | return sprintf(page, "PCI errors: parity_detect=%u, " | |
2514 | "master_abort=%u, master_target_abort=%u,\n", | |
2515 | lanai->stats.pcierr_parity_detect, | |
2516 | lanai->stats.pcierr_serr_set, | |
2517 | lanai->stats.pcierr_m_target_abort); | |
2518 | if (left-- == 0) | |
2519 | return sprintf(page, " slave_target_abort=%u, " | |
2520 | "master_parity=%u\n", lanai->stats.pcierr_s_target_abort, | |
2521 | lanai->stats.pcierr_master_parity); | |
2522 | if (left-- == 0) | |
2523 | return sprintf(page, " no_tx=%u, " | |
2524 | "no_rx=%u, bad_rx_aal=%u\n", lanai->stats.service_norx, | |
2525 | lanai->stats.service_notx, | |
2526 | lanai->stats.service_rxnotaal5); | |
2527 | if (left-- == 0) | |
2528 | return sprintf(page, "resets: dma=%u, card=%u\n", | |
2529 | lanai->stats.dma_reenable, lanai->stats.card_reset); | |
2530 | /* At this point, "left" should be the VCI we're looking for */ | |
2531 | read_lock(&vcc_sklist_lock); | |
2532 | for (; ; left++) { | |
2533 | if (left >= NUM_VCI) { | |
2534 | left = 0; | |
2535 | goto out; | |
2536 | } | |
2537 | if ((lvcc = lanai->vccs[left]) != NULL) | |
2538 | break; | |
2539 | (*pos)++; | |
2540 | } | |
2541 | /* Note that we re-use "left" here since we're done with it */ | |
2542 | left = sprintf(page, "VCI %4d: nref=%d, rx_nomem=%u", (vci_t) left, | |
2543 | lvcc->nref, lvcc->stats.rx_nomem); | |
2544 | if (lvcc->rx.atmvcc != NULL) { | |
2545 | left += sprintf(&page[left], ",\n rx_AAL=%d", | |
2546 | lvcc->rx.atmvcc->qos.aal == ATM_AAL5 ? 5 : 0); | |
2547 | if (lvcc->rx.atmvcc->qos.aal == ATM_AAL5) | |
2548 | left += sprintf(&page[left], ", rx_buf_size=%Zu, " | |
2549 | "rx_bad_len=%u,\n rx_service_trash=%u, " | |
2550 | "rx_service_stream=%u, rx_bad_crc=%u", | |
2551 | lanai_buf_size(&lvcc->rx.buf), | |
2552 | lvcc->stats.x.aal5.rx_badlen, | |
2553 | lvcc->stats.x.aal5.service_trash, | |
2554 | lvcc->stats.x.aal5.service_stream, | |
2555 | lvcc->stats.x.aal5.service_rxcrc); | |
2556 | } | |
2557 | if (lvcc->tx.atmvcc != NULL) | |
2558 | left += sprintf(&page[left], ",\n tx_AAL=%d, " | |
2559 | "tx_buf_size=%Zu, tx_qos=%cBR, tx_backlogged=%c", | |
2560 | lvcc->tx.atmvcc->qos.aal == ATM_AAL5 ? 5 : 0, | |
2561 | lanai_buf_size(&lvcc->tx.buf), | |
2562 | lvcc->tx.atmvcc == lanai->cbrvcc ? 'C' : 'U', | |
2563 | vcc_is_backlogged(lvcc) ? 'Y' : 'N'); | |
2564 | page[left++] = '\n'; | |
2565 | page[left] = '\0'; | |
2566 | out: | |
2567 | read_unlock(&vcc_sklist_lock); | |
2568 | return left; | |
2569 | } | |
2570 | #endif /* CONFIG_PROC_FS */ | |
2571 | ||
2572 | /* -------------------- HOOKS: */ | |
2573 | ||
2574 | static const struct atmdev_ops ops = { | |
2575 | .dev_close = lanai_dev_close, | |
2576 | .open = lanai_open, | |
2577 | .close = lanai_close, | |
1da177e4 LT |
2578 | .getsockopt = NULL, |
2579 | .setsockopt = NULL, | |
2580 | .send = lanai_send, | |
2581 | .phy_put = NULL, | |
2582 | .phy_get = NULL, | |
2583 | .change_qos = lanai_change_qos, | |
2584 | .proc_read = lanai_proc_read, | |
2585 | .owner = THIS_MODULE | |
2586 | }; | |
2587 | ||
2588 | /* initialize one probed card */ | |
2589 | static int __devinit lanai_init_one(struct pci_dev *pci, | |
2590 | const struct pci_device_id *ident) | |
2591 | { | |
2592 | struct lanai_dev *lanai; | |
2593 | struct atm_dev *atmdev; | |
2594 | int result; | |
2595 | ||
5cbded58 | 2596 | lanai = kmalloc(sizeof(*lanai), GFP_KERNEL); |
1da177e4 LT |
2597 | if (lanai == NULL) { |
2598 | printk(KERN_ERR DEV_LABEL | |
2599 | ": couldn't allocate dev_data structure!\n"); | |
2600 | return -ENOMEM; | |
2601 | } | |
2602 | ||
2603 | atmdev = atm_dev_register(DEV_LABEL, &ops, -1, NULL); | |
2604 | if (atmdev == NULL) { | |
2605 | printk(KERN_ERR DEV_LABEL | |
2606 | ": couldn't register atm device!\n"); | |
2607 | kfree(lanai); | |
2608 | return -EBUSY; | |
2609 | } | |
2610 | ||
2611 | atmdev->dev_data = lanai; | |
2612 | lanai->pci = pci; | |
2613 | lanai->type = (enum lanai_type) ident->device; | |
2614 | ||
2615 | result = lanai_dev_open(atmdev); | |
2616 | if (result != 0) { | |
2617 | DPRINTK("lanai_start() failed, err=%d\n", -result); | |
2618 | atm_dev_deregister(atmdev); | |
2619 | kfree(lanai); | |
2620 | } | |
2621 | return result; | |
2622 | } | |
2623 | ||
2624 | static struct pci_device_id lanai_pci_tbl[] = { | |
1d0ed384 JS |
2625 | { PCI_VDEVICE(EF, PCI_DEVICE_ID_EF_ATM_LANAI2) }, |
2626 | { PCI_VDEVICE(EF, PCI_DEVICE_ID_EF_ATM_LANAIHB) }, | |
1da177e4 LT |
2627 | { 0, } /* terminal entry */ |
2628 | }; | |
2629 | MODULE_DEVICE_TABLE(pci, lanai_pci_tbl); | |
2630 | ||
2631 | static struct pci_driver lanai_driver = { | |
2632 | .name = DEV_LABEL, | |
2633 | .id_table = lanai_pci_tbl, | |
2634 | .probe = lanai_init_one, | |
2635 | }; | |
2636 | ||
2637 | static int __init lanai_module_init(void) | |
2638 | { | |
2639 | int x; | |
2640 | ||
2641 | x = pci_register_driver(&lanai_driver); | |
2642 | if (x != 0) | |
2643 | printk(KERN_ERR DEV_LABEL ": no adapter found\n"); | |
2644 | return x; | |
2645 | } | |
2646 | ||
2647 | static void __exit lanai_module_exit(void) | |
2648 | { | |
2649 | /* We'll only get called when all the interfaces are already | |
2650 | * gone, so there isn't much to do | |
2651 | */ | |
2652 | DPRINTK("cleanup_module()\n"); | |
fd22f1e0 | 2653 | pci_unregister_driver(&lanai_driver); |
1da177e4 LT |
2654 | } |
2655 | ||
2656 | module_init(lanai_module_init); | |
2657 | module_exit(lanai_module_exit); | |
2658 | ||
2659 | MODULE_AUTHOR("Mitchell Blank Jr <mitch@sfgoth.com>"); | |
2660 | MODULE_DESCRIPTION("Efficient Networks Speedstream 3010 driver"); | |
2661 | MODULE_LICENSE("GPL"); |