[mirror_ubuntu-bionic-kernel.git] / drivers / bluetooth / Kconfig


menu "Bluetooth device drivers"
	depends on BT

config BT_INTEL
	tristate
	select REGMAP

config BT_BCM
	tristate
	select FW_LOADER

config BT_RTL
	tristate
	select FW_LOADER

config BT_QCA
	tristate
	select FW_LOADER

config BT_HCIBTUSB
	tristate "HCI USB driver"
	depends on USB
	select BT_INTEL
	help
	  Bluetooth HCI USB driver.
	  This driver is required if you want to use Bluetooth devices with
	  USB interface.

	  Say Y here to compile support for Bluetooth USB devices into the
	  kernel or say M to compile it as module (btusb).

config BT_HCIBTUSB_BCM
	bool "Broadcom protocol support"
	depends on BT_HCIBTUSB
	select BT_BCM
	default y
	help
	  The Broadcom protocol support enables firmware and patchram
	  download support for Broadcom Bluetooth controllers.

	  Say Y here to compile support for Broadcom protocol.

config BT_HCIBTUSB_RTL
	bool "Realtek protocol support"
	depends on BT_HCIBTUSB
	select BT_RTL
	default y
	help
	  The Realtek protocol support enables firmware and configuration
	  download support for Realtek Bluetooth controllers.

	  Say Y here to compile support for Realtek protocol.

config BT_HCIBTSDIO
	tristate "HCI SDIO driver"
	depends on MMC
	help
	  Bluetooth HCI SDIO driver.
	  This driver is required if you want to use Bluetooth device with
	  SDIO interface.

	  Say Y here to compile support for Bluetooth SDIO devices into the
	  kernel or say M to compile it as module (btsdio).

config BT_HCIUART
	tristate "HCI UART driver"
	depends on TTY
	help
	  Bluetooth HCI UART driver.
	  This driver is required if you want to use Bluetooth devices with
	  serial port interface. You will also need this driver if you have
	  UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
	  adapter and BrainBoxes Bluetooth PC Card.

	  Say Y here to compile support for Bluetooth UART devices into the
	  kernel or say M to compile it as module (hci_uart).

config BT_HCIUART_SERDEV
	bool
	depends on SERIAL_DEV_BUS && BT_HCIUART
	depends on SERIAL_DEV_BUS=y || SERIAL_DEV_BUS=BT_HCIUART
	default y

config BT_HCIUART_H4
	bool "UART (H4) protocol support"
	depends on BT_HCIUART
	help
	  UART (H4) is serial protocol for communication between Bluetooth
	  device and host. This protocol is required for most Bluetooth devices
	  with UART interface, including PCMCIA and CF cards.

	  Say Y here to compile support for HCI UART (H4) protocol.

config BT_HCIUART_NOKIA
	tristate "UART Nokia H4+ protocol support"
	depends on BT_HCIUART
	depends on BT_HCIUART_SERDEV
	depends on PM
	select BT_HCIUART_H4
	help
	  Nokia H4+ is serial protocol for communication between Bluetooth
	  device and host. This protocol is required for Bluetooth devices
	  with UART interface in Nokia devices.

	  Say Y here to compile support for Nokia's H4+ protocol.

config BT_HCIUART_BCSP
	bool "BCSP protocol support"
	depends on BT_HCIUART
	select BITREVERSE
	help
	  BCSP (BlueCore Serial Protocol) is serial protocol for communication
	  between Bluetooth device and host. This protocol is required for non
	  USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
	  CF cards.

	  Say Y here to compile support for HCI BCSP protocol.

config BT_HCIUART_ATH3K
	bool "Atheros AR300x serial support"
	depends on BT_HCIUART
	select BT_HCIUART_H4
	help
	  HCIATH3K (HCI Atheros AR300x) is a serial protocol for
	  communication between host and Atheros AR300x Bluetooth devices.
	  This protocol enables AR300x chips to be enabled with
	  power management support.
	  Enable this if you have Atheros AR300x serial Bluetooth device.

	  Say Y here to compile support for HCI UART ATH3K protocol.

config BT_HCIUART_LL
	bool "HCILL protocol support"
	depends on BT_HCIUART_SERDEV
	help
	  HCILL (HCI Low Level) is a serial protocol for communication
	  between Bluetooth device and host. This protocol is required for
	  serial Bluetooth devices that are based on Texas Instruments'
	  BRF chips.

	  Say Y here to compile support for HCILL protocol.

config BT_HCIUART_3WIRE
	bool "Three-wire UART (H5) protocol support"
	depends on BT_HCIUART
	help
	  The HCI Three-wire UART Transport Layer makes it possible to
	  user the Bluetooth HCI over a serial port interface. The HCI
	  Three-wire UART Transport Layer assumes that the UART
	  communication may have bit errors, overrun errors or burst
	  errors and thereby making CTS/RTS lines unnecessary.

	  Say Y here to compile support for Three-wire UART protocol.

config BT_HCIUART_INTEL
	bool "Intel protocol support"
	depends on BT_HCIUART
	select BT_HCIUART_H4
	select BT_INTEL
	help
	  The Intel protocol support enables Bluetooth HCI over serial
	  port interface for Intel Bluetooth controllers.

	  Say Y here to compile support for Intel protocol.

config BT_HCIUART_BCM
	bool "Broadcom protocol support"
	depends on BT_HCIUART
	select BT_HCIUART_H4
	select BT_BCM
	help
	  The Broadcom protocol support enables Bluetooth HCI over serial
	  port interface for Broadcom Bluetooth controllers.

	  Say Y here to compile support for Broadcom protocol.

config BT_HCIUART_QCA
	bool "Qualcomm Atheros protocol support"
	depends on BT_HCIUART
	select BT_HCIUART_H4
	select BT_QCA
	help
	  The Qualcomm Atheros protocol supports HCI In-Band Sleep feature
	  over serial port interface(H4) between controller and host.
	  This protocol is required for UART clock control for QCA Bluetooth
	  devices.

	  Say Y here to compile support for QCA protocol.

config BT_HCIUART_AG6XX
	bool "Intel AG6XX protocol support"
	depends on BT_HCIUART
	select BT_HCIUART_H4
	select BT_INTEL
	help
	  The Intel/AG6XX protocol support enables Bluetooth HCI over serial
	  port interface for Intel ibt 2.1 Bluetooth controllers.

	  Say Y here to compile support for Intel AG6XX protocol.

config BT_HCIUART_MRVL
	bool "Marvell protocol support"
	depends on BT_HCIUART
	select BT_HCIUART_H4
	help
	  Marvell is serial protocol for communication between Bluetooth
	  device and host. This protocol is required for most Marvell Bluetooth
	  devices with UART interface.

	  Say Y here to compile support for HCI MRVL protocol.

config BT_HCIBCM203X
	tristate "HCI BCM203x USB driver"
	depends on USB
	select FW_LOADER
	help
	  Bluetooth HCI BCM203x USB driver.
	  This driver provides the firmware loading mechanism for the Broadcom
	  Blutonium based devices.

	  Say Y here to compile support for HCI BCM203x devices into the
	  kernel or say M to compile it as module (bcm203x).

config BT_HCIBPA10X
	tristate "HCI BPA10x USB driver"
	depends on USB && BT_HCIUART
	select BT_HCIUART_H4
	help
	  Bluetooth HCI BPA10x USB driver.
	  This driver provides support for the Digianswer BPA 100/105 Bluetooth
	  sniffer devices.

	  Say Y here to compile support for HCI BPA10x devices into the
	  kernel or say M to compile it as module (bpa10x).

config BT_HCIBFUSB
	tristate "HCI BlueFRITZ! USB driver"
	depends on USB
	select FW_LOADER
	help
	  Bluetooth HCI BlueFRITZ! USB driver.
	  This driver provides support for Bluetooth USB devices with AVM
	  interface:
	     AVM BlueFRITZ! USB

	  Say Y here to compile support for HCI BFUSB devices into the
	  kernel or say M to compile it as module (bfusb).

config BT_HCIDTL1
	tristate "HCI DTL1 (PC Card) driver"
	depends on PCMCIA
	help
	  Bluetooth HCI DTL1 (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  Nokia DTL1 interface:
	     Nokia Bluetooth Card
	     Socket Bluetooth CF Card

	  Say Y here to compile support for HCI DTL1 devices into the
	  kernel or say M to compile it as module (dtl1_cs).

config BT_HCIBT3C
	tristate "HCI BT3C (PC Card) driver"
	depends on PCMCIA
	select FW_LOADER
	help
	  Bluetooth HCI BT3C (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  3Com BT3C interface:
	     3Com Bluetooth Card (3CRWB6096)
	     HP Bluetooth Card

	  Say Y here to compile support for HCI BT3C devices into the
	  kernel or say M to compile it as module (bt3c_cs).

config BT_HCIBLUECARD
	tristate "HCI BlueCard (PC Card) driver"
	depends on PCMCIA
	help
	  Bluetooth HCI BlueCard (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  Anycom BlueCard interface:
	     Anycom Bluetooth PC Card
	     Anycom Bluetooth CF Card

	  Say Y here to compile support for HCI BlueCard devices into the
	  kernel or say M to compile it as module (bluecard_cs).

config BT_HCIBTUART
	tristate "HCI UART (PC Card) device driver"
	depends on PCMCIA
	help
	  Bluetooth HCI UART (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  an UART interface:
	     Xircom CreditCard Bluetooth Adapter
	     Xircom RealPort2 Bluetooth Adapter
	     Sphinx PICO Card
	     H-Soft blue+Card
	     Cyber-blue Compact Flash Card

	  Say Y here to compile support for HCI UART devices into the
	  kernel or say M to compile it as module (btuart_cs).

config BT_HCIVHCI
	tristate "HCI VHCI (Virtual HCI device) driver"
	help
	  Bluetooth Virtual HCI device driver.
	  This driver is required if you want to use HCI Emulation software.

	  Say Y here to compile support for virtual HCI devices into the
	  kernel or say M to compile it as module (hci_vhci).

config BT_MRVL
	tristate "Marvell Bluetooth driver support"
	help
	  The core driver to support Marvell Bluetooth devices.

	  This driver is required if you want to support
	  Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8997.

	  Say Y here to compile Marvell Bluetooth driver
	  into the kernel or say M to compile it as module.

config BT_MRVL_SDIO
	tristate "Marvell BT-over-SDIO driver"
	depends on BT_MRVL && MMC
	select FW_LOADER
	select WANT_DEV_COREDUMP
	help
	  The driver for Marvell Bluetooth chipsets with SDIO interface.

	  This driver is required if you want to use Marvell Bluetooth
	  devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8997
	  chipsets are supported.

	  Say Y here to compile support for Marvell BT-over-SDIO driver
	  into the kernel or say M to compile it as module.

config BT_ATH3K
	tristate "Atheros firmware download driver"
	depends on BT_HCIBTUSB
	select FW_LOADER
	help
	  Bluetooth firmware download driver.
	  This driver loads the firmware into the Atheros Bluetooth
	  chipset.

	  Say Y here to compile support for "Atheros firmware download driver"
	  into the kernel or say M to compile it as module (ath3k).

config BT_WILINK
	tristate "Texas Instruments WiLink7 driver"
	depends on TI_ST
	help
	  This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS
	  combo devices. This makes use of shared transport line discipline
	  core driver to communicate with the BT core of the combo chip.

	  Say Y here to compile support for Texas Instrument's WiLink7 driver
	  into the kernel or say M to compile it as module (btwilink).

config BT_QCOMSMD
	tristate "Qualcomm SMD based HCI support"
	depends on RPMSG || (COMPILE_TEST && RPMSG=n)
	depends on QCOM_WCNSS_CTRL || (COMPILE_TEST && QCOM_WCNSS_CTRL=n)
	select BT_QCA
	help
	  Qualcomm SMD based HCI driver.
	  This driver is used to bridge HCI data onto the shared memory
	  channels to the WCNSS core.

	  Say Y here to compile support for HCI over Qualcomm SMD into the
	  kernel or say M to compile as a module.

endmenu
Commit	Line	Data
1da177e4 LT	1
	2	menu "Bluetooth device drivers"
	3	depends on BT
	4
48f0ed1b MH	5	config BT_INTEL
48f0ed1b MH	6	tristate
d06f107b	7	select REGMAP
48f0ed1b	8
4fba30f0 MH	9	config BT_BCM
4fba30f0 MH	10	tristate
1c8ba6d0	11	select FW_LOADER
4fba30f0	12
db33c77d CC	13	config BT_RTL
	14	tristate
	15	select FW_LOADER
	16
83e81961 BYTK	17	config BT_QCA
	18	tristate
	19	select FW_LOADER
	20
5e23b923	21	config BT_HCIBTUSB
9bfa35fe MH	22	tristate "HCI USB driver"
9bfa35fe MH	23	depends on USB
4185a0f5	24	select BT_INTEL
5e23b923 MH	25	help
	26	Bluetooth HCI USB driver.
	27	This driver is required if you want to use Bluetooth devices with
	28	USB interface.
	29
5e23b923 MH	30	Say Y here to compile support for Bluetooth USB devices into the
	31	kernel or say M to compile it as module (btusb).
	32
c2bfb100 MH	33	config BT_HCIBTUSB_BCM
	34	bool "Broadcom protocol support"
	35	depends on BT_HCIBTUSB
	36	select BT_BCM
	37	default y
	38	help
	39	The Broadcom protocol support enables firmware and patchram
	40	download support for Broadcom Bluetooth controllers.
	41
	42	Say Y here to compile support for Broadcom protocol.
	43
db33c77d CC	44	config BT_HCIBTUSB_RTL
	45	bool "Realtek protocol support"
	46	depends on BT_HCIBTUSB
	47	select BT_RTL
	48	default y
	49	help
	50	The Realtek protocol support enables firmware and configuration
	51	download support for Realtek Bluetooth controllers.
	52
	53	Say Y here to compile support for Realtek protocol.
	54
ddbaf13e MH	55	config BT_HCIBTSDIO
	56	tristate "HCI SDIO driver"
	57	depends on MMC
	58	help
	59	Bluetooth HCI SDIO driver.
	60	This driver is required if you want to use Bluetooth device with
	61	SDIO interface.
	62
	63	Say Y here to compile support for Bluetooth SDIO devices into the
	64	kernel or say M to compile it as module (btsdio).
	65
1da177e4 LT	66	config BT_HCIUART
1da177e4 LT	67	tristate "HCI UART driver"
4f73bc4d	68	depends on TTY
1da177e4 LT	69	help
	70	Bluetooth HCI UART driver.
	71	This driver is required if you want to use Bluetooth devices with
8ba8b4c0 SG	72	serial port interface. You will also need this driver if you have
8ba8b4c0 SG	73	UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
1da177e4 LT	74	adapter and BrainBoxes Bluetooth PC Card.
	75
	76	Say Y here to compile support for Bluetooth UART devices into the
	77	kernel or say M to compile it as module (hci_uart).
	78
1fb78fb6 AB	79	config BT_HCIUART_SERDEV
	80	bool
	81	depends on SERIAL_DEV_BUS && BT_HCIUART
	82	depends on SERIAL_DEV_BUS=y \|\| SERIAL_DEV_BUS=BT_HCIUART
	83	default y
	84
1da177e4 LT	85	config BT_HCIUART_H4
	86	bool "UART (H4) protocol support"
	87	depends on BT_HCIUART
	88	help
8ba8b4c0 SG	89	UART (H4) is serial protocol for communication between Bluetooth
	90	device and host. This protocol is required for most Bluetooth devices
	91	with UART interface, including PCMCIA and CF cards.
1da177e4 LT	92
	93	Say Y here to compile support for HCI UART (H4) protocol.
	94
7bb31868 SR	95	config BT_HCIUART_NOKIA
	96	tristate "UART Nokia H4+ protocol support"
	97	depends on BT_HCIUART
1fb78fb6	98	depends on BT_HCIUART_SERDEV
7bb31868	99	depends on PM
c42c88e6	100	select BT_HCIUART_H4
7bb31868 SR	101	help
	102	Nokia H4+ is serial protocol for communication between Bluetooth
	103	device and host. This protocol is required for Bluetooth devices
	104	with UART interface in Nokia devices.
	105
	106	Say Y here to compile support for Nokia's H4+ protocol.
	107
1da177e4 LT	108	config BT_HCIUART_BCSP
	109	bool "BCSP protocol support"
	110	depends on BT_HCIUART
d3a8eab0	111	select BITREVERSE
1da177e4	112	help
8ba8b4c0	113	BCSP (BlueCore Serial Protocol) is serial protocol for communication
1da177e4 LT	114	between Bluetooth device and host. This protocol is required for non
	115	USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
	116	CF cards.
	117
	118	Say Y here to compile support for HCI BCSP protocol.
	119
b3190df6 SS	120	config BT_HCIUART_ATH3K
	121	bool "Atheros AR300x serial support"
	122	depends on BT_HCIUART
d90aa682	123	select BT_HCIUART_H4
b3190df6 SS	124	help
	125	HCIATH3K (HCI Atheros AR300x) is a serial protocol for
	126	communication between host and Atheros AR300x Bluetooth devices.
	127	This protocol enables AR300x chips to be enabled with
	128	power management support.
	129	Enable this if you have Atheros AR300x serial Bluetooth device.
	130
	131	Say Y here to compile support for HCI UART ATH3K protocol.
	132
166d2f6a OBC	133	config BT_HCIUART_LL
166d2f6a OBC	134	bool "HCILL protocol support"
76c4969f	135	depends on BT_HCIUART_SERDEV
166d2f6a OBC	136	help
	137	HCILL (HCI Low Level) is a serial protocol for communication
	138	between Bluetooth device and host. This protocol is required for
	139	serial Bluetooth devices that are based on Texas Instruments'
	140	BRF chips.
	141
	142	Say Y here to compile support for HCILL protocol.
	143
7dec65c8 JH	144	config BT_HCIUART_3WIRE
	145	bool "Three-wire UART (H5) protocol support"
	146	depends on BT_HCIUART
	147	help
	148	The HCI Three-wire UART Transport Layer makes it possible to
	149	user the Bluetooth HCI over a serial port interface. The HCI
	150	Three-wire UART Transport Layer assumes that the UART
	151	communication may have bit errors, overrun errors or burst
	152	errors and thereby making CTS/RTS lines unnecessary.
	153
	154	Say Y here to compile support for Three-wire UART protocol.
	155
16e3887f MH	156	config BT_HCIUART_INTEL
	157	bool "Intel protocol support"
	158	depends on BT_HCIUART
ca93cee5	159	select BT_HCIUART_H4
bca03c95	160	select BT_INTEL
16e3887f MH	161	help
	162	The Intel protocol support enables Bluetooth HCI over serial
	163	port interface for Intel Bluetooth controllers.
	164
	165	Say Y here to compile support for Intel protocol.
	166
e9a2dd26 MH	167	config BT_HCIUART_BCM
	168	bool "Broadcom protocol support"
	169	depends on BT_HCIUART
bdd8818e	170	select BT_HCIUART_H4
3e0ac12a	171	select BT_BCM
e9a2dd26 MH	172	help
	173	The Broadcom protocol support enables Bluetooth HCI over serial
	174	port interface for Broadcom Bluetooth controllers.
	175
	176	Say Y here to compile support for Broadcom protocol.
	177
0ff252c1 BYTK	178	config BT_HCIUART_QCA
	179	bool "Qualcomm Atheros protocol support"
	180	depends on BT_HCIUART
	181	select BT_HCIUART_H4
	182	select BT_QCA
	183	help
	184	The Qualcomm Atheros protocol supports HCI In-Band Sleep feature
	185	over serial port interface(H4) between controller and host.
	186	This protocol is required for UART clock control for QCA Bluetooth
	187	devices.
	188
	189	Say Y here to compile support for QCA protocol.
	190
395174bb LP	191	config BT_HCIUART_AG6XX
	192	bool "Intel AG6XX protocol support"
	193	depends on BT_HCIUART
	194	select BT_HCIUART_H4
	195	select BT_INTEL
	196	help
	197	The Intel/AG6XX protocol support enables Bluetooth HCI over serial
	198	port interface for Intel ibt 2.1 Bluetooth controllers.
	199
	200	Say Y here to compile support for Intel AG6XX protocol.
162f812f LP	201
	202	config BT_HCIUART_MRVL
	203	bool "Marvell protocol support"
	204	depends on BT_HCIUART
	205	select BT_HCIUART_H4
	206	help
	207	Marvell is serial protocol for communication between Bluetooth
	208	device and host. This protocol is required for most Marvell Bluetooth
	209	devices with UART interface.
	210
	211	Say Y here to compile support for HCI MRVL protocol.
395174bb	212
1da177e4 LT	213	config BT_HCIBCM203X
	214	tristate "HCI BCM203x USB driver"
	215	depends on USB
	216	select FW_LOADER
	217	help
	218	Bluetooth HCI BCM203x USB driver.
	219	This driver provides the firmware loading mechanism for the Broadcom
	220	Blutonium based devices.
	221
	222	Say Y here to compile support for HCI BCM203x devices into the
	223	kernel or say M to compile it as module (bcm203x).
	224
	225	config BT_HCIBPA10X
	226	tristate "HCI BPA10x USB driver"
7841d06e	227	depends on USB && BT_HCIUART
943cc592	228	select BT_HCIUART_H4
1da177e4 LT	229	help
	230	Bluetooth HCI BPA10x USB driver.
	231	This driver provides support for the Digianswer BPA 100/105 Bluetooth
	232	sniffer devices.
	233
	234	Say Y here to compile support for HCI BPA10x devices into the
	235	kernel or say M to compile it as module (bpa10x).
	236
	237	config BT_HCIBFUSB
	238	tristate "HCI BlueFRITZ! USB driver"
	239	depends on USB
	240	select FW_LOADER
	241	help
	242	Bluetooth HCI BlueFRITZ! USB driver.
	243	This driver provides support for Bluetooth USB devices with AVM
	244	interface:
	245	AVM BlueFRITZ! USB
	246
	247	Say Y here to compile support for HCI BFUSB devices into the
	248	kernel or say M to compile it as module (bfusb).
	249
	250	config BT_HCIDTL1
	251	tristate "HCI DTL1 (PC Card) driver"
	252	depends on PCMCIA
	253	help
	254	Bluetooth HCI DTL1 (PC Card) driver.
	255	This driver provides support for Bluetooth PCMCIA devices with
	256	Nokia DTL1 interface:
	257	Nokia Bluetooth Card
	258	Socket Bluetooth CF Card
	259
	260	Say Y here to compile support for HCI DTL1 devices into the
	261	kernel or say M to compile it as module (dtl1_cs).
	262
	263	config BT_HCIBT3C
	264	tristate "HCI BT3C (PC Card) driver"
	265	depends on PCMCIA
	266	select FW_LOADER
	267	help
	268	Bluetooth HCI BT3C (PC Card) driver.
	269	This driver provides support for Bluetooth PCMCIA devices with
	270	3Com BT3C interface:
	271	3Com Bluetooth Card (3CRWB6096)
	272	HP Bluetooth Card
	273
	274	Say Y here to compile support for HCI BT3C devices into the
	275	kernel or say M to compile it as module (bt3c_cs).
	276
	277	config BT_HCIBLUECARD
	278	tristate "HCI BlueCard (PC Card) driver"
	279	depends on PCMCIA
	280	help
	281	Bluetooth HCI BlueCard (PC Card) driver.
	282	This driver provides support for Bluetooth PCMCIA devices with
	283	Anycom BlueCard interface:
	284	Anycom Bluetooth PC Card
	285	Anycom Bluetooth CF Card
	286
	287	Say Y here to compile support for HCI BlueCard devices into the
	288	kernel or say M to compile it as module (bluecard_cs).
	289
	290	config BT_HCIBTUART
	291	tristate "HCI UART (PC Card) device driver"
	292	depends on PCMCIA
293	help
294	Bluetooth HCI UART (PC Card) driver.
295	This driver provides support for Bluetooth PCMCIA devices with
296	an UART interface:
297	Xircom CreditCard Bluetooth Adapter
298	Xircom RealPort2 Bluetooth Adapter
299	Sphinx PICO Card
300	H-Soft blue+Card
301	Cyber-blue Compact Flash Card
302
303	Say Y here to compile support for HCI UART devices into the
304	kernel or say M to compile it as module (btuart_cs).
305
306	config BT_HCIVHCI
307	tristate "HCI VHCI (Virtual HCI device) driver"
308	help
309	Bluetooth Virtual HCI device driver.
310	This driver is required if you want to use HCI Emulation software.
311
312	Say Y here to compile support for virtual HCI devices into the
313	kernel or say M to compile it as module (hci_vhci).
314
132ff4e5 BZ	315	config BT_MRVL
132ff4e5 BZ	316	tristate "Marvell Bluetooth driver support"
132ff4e5 BZ	317	help
	318	The core driver to support Marvell Bluetooth devices.
	319
	320	This driver is required if you want to support
f0ef6748	321	Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8997.
132ff4e5 BZ	322
	323	Say Y here to compile Marvell Bluetooth driver
	324	into the kernel or say M to compile it as module.
	325
789221ec BZ	326	config BT_MRVL_SDIO
	327	tristate "Marvell BT-over-SDIO driver"
	328	depends on BT_MRVL && MMC
e7a25f98	329	select FW_LOADER
dc759613	330	select WANT_DEV_COREDUMP
789221ec BZ	331	help
	332	The driver for Marvell Bluetooth chipsets with SDIO interface.
	333
	334	This driver is required if you want to use Marvell Bluetooth
f0ef6748	335	devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8997
2ac654f7	336	chipsets are supported.
789221ec BZ	337
	338	Say Y here to compile support for Marvell BT-over-SDIO driver
	339	into the kernel or say M to compile it as module.
	340
9670d80a VK	341	config BT_ATH3K
	342	tristate "Atheros firmware download driver"
	343	depends on BT_HCIBTUSB
	344	select FW_LOADER
	345	help
	346	Bluetooth firmware download driver.
	347	This driver loads the firmware into the Atheros Bluetooth
	348	chipset.
1da177e4	349
9670d80a VK	350	Say Y here to compile support for "Atheros firmware download driver"
	351	into the kernel or say M to compile it as module (ath3k).
	352
363907af PS	353	config BT_WILINK
	354	tristate "Texas Instruments WiLink7 driver"
	355	depends on TI_ST
	356	help
	357	This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS
	358	combo devices. This makes use of shared transport line discipline
	359	core driver to communicate with the BT core of the combo chip.
	360
	361	Say Y here to compile support for Texas Instrument's WiLink7 driver
22e8ee12 PM	362	into the kernel or say M to compile it as module (btwilink).
22e8ee12 PM	363
1511cc75 BA	364	config BT_QCOMSMD
1511cc75 BA	365	tristate "Qualcomm SMD based HCI support"
5052de8d	366	depends on RPMSG \|\| (COMPILE_TEST && RPMSG=n)
6e9e6cc8	367	depends on QCOM_WCNSS_CTRL \|\| (COMPILE_TEST && QCOM_WCNSS_CTRL=n)
1511cc75 BA	368	select BT_QCA
	369	help
	370	Qualcomm SMD based HCI driver.
	371	This driver is used to bridge HCI data onto the shared memory
	372	channels to the WCNSS core.
	373
	374	Say Y here to compile support for HCI over Qualcomm SMD into the
	375	kernel or say M to compile as a module.
	376
9670d80a	377	endmenu