]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * Copyright 2001-2003 SuSE Labs. | |
3 | * Distributed under the GNU public license, v2. | |
4 | * | |
5 | * This is a GART driver for the AMD Opteron/Athlon64 on-CPU northbridge. | |
6 | * It also includes support for the AMD 8151 AGP bridge, | |
7 | * although it doesn't actually do much, as all the real | |
8 | * work is done in the northbridge(s). | |
9 | */ | |
10 | ||
11 | #include <linux/config.h> | |
12 | #include <linux/module.h> | |
13 | #include <linux/pci.h> | |
14 | #include <linux/init.h> | |
15 | #include <linux/agp_backend.h> | |
16 | #include "agp.h" | |
17 | ||
18 | /* Will need to be increased if AMD64 ever goes >8-way. */ | |
19 | #define MAX_HAMMER_GARTS 8 | |
20 | ||
21 | /* PTE bits. */ | |
22 | #define GPTE_VALID 1 | |
23 | #define GPTE_COHERENT 2 | |
24 | ||
25 | /* Aperture control register bits. */ | |
26 | #define GARTEN (1<<0) | |
27 | #define DISGARTCPU (1<<4) | |
28 | #define DISGARTIO (1<<5) | |
29 | ||
30 | /* GART cache control register bits. */ | |
31 | #define INVGART (1<<0) | |
32 | #define GARTPTEERR (1<<1) | |
33 | ||
34 | /* K8 On-cpu GART registers */ | |
35 | #define AMD64_GARTAPERTURECTL 0x90 | |
36 | #define AMD64_GARTAPERTUREBASE 0x94 | |
37 | #define AMD64_GARTTABLEBASE 0x98 | |
38 | #define AMD64_GARTCACHECTL 0x9c | |
39 | #define AMD64_GARTEN (1<<0) | |
40 | ||
41 | /* NVIDIA K8 registers */ | |
42 | #define NVIDIA_X86_64_0_APBASE 0x10 | |
43 | #define NVIDIA_X86_64_1_APBASE1 0x50 | |
44 | #define NVIDIA_X86_64_1_APLIMIT1 0x54 | |
45 | #define NVIDIA_X86_64_1_APSIZE 0xa8 | |
46 | #define NVIDIA_X86_64_1_APBASE2 0xd8 | |
47 | #define NVIDIA_X86_64_1_APLIMIT2 0xdc | |
48 | ||
49 | /* ULi K8 registers */ | |
50 | #define ULI_X86_64_BASE_ADDR 0x10 | |
51 | #define ULI_X86_64_HTT_FEA_REG 0x50 | |
52 | #define ULI_X86_64_ENU_SCR_REG 0x54 | |
53 | ||
54 | static int nr_garts; | |
55 | static struct pci_dev * hammers[MAX_HAMMER_GARTS]; | |
56 | ||
57 | static struct resource *aperture_resource; | |
58 | static int __initdata agp_try_unsupported; | |
59 | ||
60 | static int gart_iterator; | |
61 | #define for_each_nb() for(gart_iterator=0;gart_iterator<nr_garts;gart_iterator++) | |
62 | ||
63 | static void flush_amd64_tlb(struct pci_dev *dev) | |
64 | { | |
65 | u32 tmp; | |
66 | ||
67 | pci_read_config_dword (dev, AMD64_GARTCACHECTL, &tmp); | |
68 | tmp |= INVGART; | |
69 | pci_write_config_dword (dev, AMD64_GARTCACHECTL, tmp); | |
70 | } | |
71 | ||
72 | static void amd64_tlbflush(struct agp_memory *temp) | |
73 | { | |
74 | for_each_nb() | |
75 | flush_amd64_tlb(hammers[gart_iterator]); | |
76 | } | |
77 | ||
78 | static int amd64_insert_memory(struct agp_memory *mem, off_t pg_start, int type) | |
79 | { | |
80 | int i, j, num_entries; | |
81 | long long tmp; | |
82 | u32 pte; | |
83 | ||
84 | num_entries = agp_num_entries(); | |
85 | ||
86 | if (type != 0 || mem->type != 0) | |
87 | return -EINVAL; | |
88 | ||
89 | /* Make sure we can fit the range in the gatt table. */ | |
90 | /* FIXME: could wrap */ | |
91 | if (((unsigned long)pg_start + mem->page_count) > num_entries) | |
92 | return -EINVAL; | |
93 | ||
94 | j = pg_start; | |
95 | ||
96 | /* gatt table should be empty. */ | |
97 | while (j < (pg_start + mem->page_count)) { | |
98 | if (!PGE_EMPTY(agp_bridge, readl(agp_bridge->gatt_table+j))) | |
99 | return -EBUSY; | |
100 | j++; | |
101 | } | |
102 | ||
103 | if (mem->is_flushed == FALSE) { | |
104 | global_cache_flush(); | |
105 | mem->is_flushed = TRUE; | |
106 | } | |
107 | ||
108 | for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { | |
109 | tmp = agp_bridge->driver->mask_memory(agp_bridge, | |
110 | mem->memory[i], mem->type); | |
111 | ||
112 | BUG_ON(tmp & 0xffffff0000000ffcULL); | |
113 | pte = (tmp & 0x000000ff00000000ULL) >> 28; | |
114 | pte |=(tmp & 0x00000000fffff000ULL); | |
115 | pte |= GPTE_VALID | GPTE_COHERENT; | |
116 | ||
117 | writel(pte, agp_bridge->gatt_table+j); | |
118 | readl(agp_bridge->gatt_table+j); /* PCI Posting. */ | |
119 | } | |
120 | amd64_tlbflush(mem); | |
121 | return 0; | |
122 | } | |
123 | ||
124 | /* | |
125 | * This hack alters the order element according | |
126 | * to the size of a long. It sucks. I totally disown this, even | |
127 | * though it does appear to work for the most part. | |
128 | */ | |
129 | static struct aper_size_info_32 amd64_aperture_sizes[7] = | |
130 | { | |
131 | {32, 8192, 3+(sizeof(long)/8), 0 }, | |
132 | {64, 16384, 4+(sizeof(long)/8), 1<<1 }, | |
133 | {128, 32768, 5+(sizeof(long)/8), 1<<2 }, | |
134 | {256, 65536, 6+(sizeof(long)/8), 1<<1 | 1<<2 }, | |
135 | {512, 131072, 7+(sizeof(long)/8), 1<<3 }, | |
136 | {1024, 262144, 8+(sizeof(long)/8), 1<<1 | 1<<3}, | |
137 | {2048, 524288, 9+(sizeof(long)/8), 1<<2 | 1<<3} | |
138 | }; | |
139 | ||
140 | ||
141 | /* | |
142 | * Get the current Aperture size from the x86-64. | |
143 | * Note, that there may be multiple x86-64's, but we just return | |
144 | * the value from the first one we find. The set_size functions | |
145 | * keep the rest coherent anyway. Or at least should do. | |
146 | */ | |
147 | static int amd64_fetch_size(void) | |
148 | { | |
149 | struct pci_dev *dev; | |
150 | int i; | |
151 | u32 temp; | |
152 | struct aper_size_info_32 *values; | |
153 | ||
154 | dev = hammers[0]; | |
155 | if (dev==NULL) | |
156 | return 0; | |
157 | ||
158 | pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &temp); | |
159 | temp = (temp & 0xe); | |
160 | values = A_SIZE_32(amd64_aperture_sizes); | |
161 | ||
162 | for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) { | |
163 | if (temp == values[i].size_value) { | |
164 | agp_bridge->previous_size = | |
165 | agp_bridge->current_size = (void *) (values + i); | |
166 | ||
167 | agp_bridge->aperture_size_idx = i; | |
168 | return values[i].size; | |
169 | } | |
170 | } | |
171 | return 0; | |
172 | } | |
173 | ||
174 | /* | |
175 | * In a multiprocessor x86-64 system, this function gets | |
176 | * called once for each CPU. | |
177 | */ | |
178 | static u64 amd64_configure (struct pci_dev *hammer, u64 gatt_table) | |
179 | { | |
180 | u64 aperturebase; | |
181 | u32 tmp; | |
182 | u64 addr, aper_base; | |
183 | ||
184 | /* Address to map to */ | |
185 | pci_read_config_dword (hammer, AMD64_GARTAPERTUREBASE, &tmp); | |
186 | aperturebase = tmp << 25; | |
187 | aper_base = (aperturebase & PCI_BASE_ADDRESS_MEM_MASK); | |
188 | ||
189 | /* address of the mappings table */ | |
190 | addr = (u64) gatt_table; | |
191 | addr >>= 12; | |
192 | tmp = (u32) addr<<4; | |
193 | tmp &= ~0xf; | |
194 | pci_write_config_dword (hammer, AMD64_GARTTABLEBASE, tmp); | |
195 | ||
196 | /* Enable GART translation for this hammer. */ | |
197 | pci_read_config_dword(hammer, AMD64_GARTAPERTURECTL, &tmp); | |
198 | tmp |= GARTEN; | |
199 | tmp &= ~(DISGARTCPU | DISGARTIO); | |
200 | pci_write_config_dword(hammer, AMD64_GARTAPERTURECTL, tmp); | |
201 | ||
202 | /* keep CPU's coherent. */ | |
203 | flush_amd64_tlb (hammer); | |
204 | ||
205 | return aper_base; | |
206 | } | |
207 | ||
208 | ||
209 | static struct aper_size_info_32 amd_8151_sizes[7] = | |
210 | { | |
211 | {2048, 524288, 9, 0x00000000 }, /* 0 0 0 0 0 0 */ | |
212 | {1024, 262144, 8, 0x00000400 }, /* 1 0 0 0 0 0 */ | |
213 | {512, 131072, 7, 0x00000600 }, /* 1 1 0 0 0 0 */ | |
214 | {256, 65536, 6, 0x00000700 }, /* 1 1 1 0 0 0 */ | |
215 | {128, 32768, 5, 0x00000720 }, /* 1 1 1 1 0 0 */ | |
216 | {64, 16384, 4, 0x00000730 }, /* 1 1 1 1 1 0 */ | |
217 | {32, 8192, 3, 0x00000738 } /* 1 1 1 1 1 1 */ | |
218 | }; | |
219 | ||
220 | static int amd_8151_configure(void) | |
221 | { | |
07eee78e | 222 | unsigned long gatt_bus = virt_to_gart(agp_bridge->gatt_table_real); |
1da177e4 LT |
223 | |
224 | /* Configure AGP regs in each x86-64 host bridge. */ | |
225 | for_each_nb() { | |
226 | agp_bridge->gart_bus_addr = | |
227 | amd64_configure(hammers[gart_iterator],gatt_bus); | |
228 | } | |
229 | return 0; | |
230 | } | |
231 | ||
232 | ||
233 | static void amd64_cleanup(void) | |
234 | { | |
235 | u32 tmp; | |
236 | ||
237 | for_each_nb() { | |
238 | /* disable gart translation */ | |
239 | pci_read_config_dword (hammers[gart_iterator], AMD64_GARTAPERTURECTL, &tmp); | |
240 | tmp &= ~AMD64_GARTEN; | |
241 | pci_write_config_dword (hammers[gart_iterator], AMD64_GARTAPERTURECTL, tmp); | |
242 | } | |
243 | } | |
244 | ||
245 | ||
408b664a | 246 | static struct agp_bridge_driver amd_8151_driver = { |
1da177e4 LT |
247 | .owner = THIS_MODULE, |
248 | .aperture_sizes = amd_8151_sizes, | |
249 | .size_type = U32_APER_SIZE, | |
250 | .num_aperture_sizes = 7, | |
251 | .configure = amd_8151_configure, | |
252 | .fetch_size = amd64_fetch_size, | |
253 | .cleanup = amd64_cleanup, | |
254 | .tlb_flush = amd64_tlbflush, | |
255 | .mask_memory = agp_generic_mask_memory, | |
256 | .masks = NULL, | |
257 | .agp_enable = agp_generic_enable, | |
258 | .cache_flush = global_cache_flush, | |
259 | .create_gatt_table = agp_generic_create_gatt_table, | |
260 | .free_gatt_table = agp_generic_free_gatt_table, | |
261 | .insert_memory = amd64_insert_memory, | |
262 | .remove_memory = agp_generic_remove_memory, | |
263 | .alloc_by_type = agp_generic_alloc_by_type, | |
264 | .free_by_type = agp_generic_free_by_type, | |
265 | .agp_alloc_page = agp_generic_alloc_page, | |
266 | .agp_destroy_page = agp_generic_destroy_page, | |
267 | }; | |
268 | ||
269 | /* Some basic sanity checks for the aperture. */ | |
270 | static int __devinit aperture_valid(u64 aper, u32 size) | |
271 | { | |
272 | u32 pfn, c; | |
273 | if (aper == 0) { | |
274 | printk(KERN_ERR PFX "No aperture\n"); | |
275 | return 0; | |
276 | } | |
277 | if (size < 32*1024*1024) { | |
278 | printk(KERN_ERR PFX "Aperture too small (%d MB)\n", size>>20); | |
279 | return 0; | |
280 | } | |
281 | if (aper + size > 0xffffffff) { | |
282 | printk(KERN_ERR PFX "Aperture out of bounds\n"); | |
283 | return 0; | |
284 | } | |
285 | pfn = aper >> PAGE_SHIFT; | |
286 | for (c = 0; c < size/PAGE_SIZE; c++) { | |
287 | if (!pfn_valid(pfn + c)) | |
288 | break; | |
289 | if (!PageReserved(pfn_to_page(pfn + c))) { | |
290 | printk(KERN_ERR PFX "Aperture pointing to RAM\n"); | |
291 | return 0; | |
292 | } | |
293 | } | |
294 | ||
295 | /* Request the Aperture. This catches cases when someone else | |
296 | already put a mapping in there - happens with some very broken BIOS | |
297 | ||
298 | Maybe better to use pci_assign_resource/pci_enable_device instead | |
299 | trusting the bridges? */ | |
300 | if (!aperture_resource && | |
301 | !(aperture_resource = request_mem_region(aper, size, "aperture"))) { | |
302 | printk(KERN_ERR PFX "Aperture conflicts with PCI mapping.\n"); | |
303 | return 0; | |
304 | } | |
305 | return 1; | |
306 | } | |
307 | ||
308 | /* | |
309 | * W*s centric BIOS sometimes only set up the aperture in the AGP | |
310 | * bridge, not the northbridge. On AMD64 this is handled early | |
311 | * in aperture.c, but when GART_IOMMU is not enabled or we run | |
312 | * on a 32bit kernel this needs to be redone. | |
313 | * Unfortunately it is impossible to fix the aperture here because it's too late | |
314 | * to allocate that much memory. But at least error out cleanly instead of | |
315 | * crashing. | |
316 | */ | |
317 | static __devinit int fix_northbridge(struct pci_dev *nb, struct pci_dev *agp, | |
318 | u16 cap) | |
319 | { | |
320 | u32 aper_low, aper_hi; | |
321 | u64 aper, nb_aper; | |
322 | int order = 0; | |
323 | u32 nb_order, nb_base; | |
324 | u16 apsize; | |
325 | ||
326 | pci_read_config_dword(nb, 0x90, &nb_order); | |
327 | nb_order = (nb_order >> 1) & 7; | |
328 | pci_read_config_dword(nb, 0x94, &nb_base); | |
329 | nb_aper = nb_base << 25; | |
330 | if (aperture_valid(nb_aper, (32*1024*1024)<<nb_order)) { | |
331 | return 0; | |
332 | } | |
333 | ||
334 | /* Northbridge seems to contain crap. Try the AGP bridge. */ | |
335 | ||
336 | pci_read_config_word(agp, cap+0x14, &apsize); | |
337 | if (apsize == 0xffff) | |
338 | return -1; | |
339 | ||
340 | apsize &= 0xfff; | |
341 | /* Some BIOS use weird encodings not in the AGPv3 table. */ | |
342 | if (apsize & 0xff) | |
343 | apsize |= 0xf00; | |
344 | order = 7 - hweight16(apsize); | |
345 | ||
346 | pci_read_config_dword(agp, 0x10, &aper_low); | |
347 | pci_read_config_dword(agp, 0x14, &aper_hi); | |
348 | aper = (aper_low & ~((1<<22)-1)) | ((u64)aper_hi << 32); | |
349 | printk(KERN_INFO PFX "Aperture from AGP @ %Lx size %u MB\n", aper, 32 << order); | |
350 | if (order < 0 || !aperture_valid(aper, (32*1024*1024)<<order)) | |
351 | return -1; | |
352 | ||
353 | pci_write_config_dword(nb, 0x90, order << 1); | |
354 | pci_write_config_dword(nb, 0x94, aper >> 25); | |
355 | ||
356 | return 0; | |
357 | } | |
358 | ||
359 | static __devinit int cache_nbs (struct pci_dev *pdev, u32 cap_ptr) | |
360 | { | |
361 | struct pci_dev *loop_dev = NULL; | |
362 | int i = 0; | |
363 | ||
364 | /* cache pci_devs of northbridges. */ | |
365 | while ((loop_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1103, loop_dev)) | |
366 | != NULL) { | |
367 | if (i == MAX_HAMMER_GARTS) { | |
368 | printk(KERN_ERR PFX "Too many northbridges for AGP\n"); | |
369 | return -1; | |
370 | } | |
371 | if (fix_northbridge(loop_dev, pdev, cap_ptr) < 0) { | |
372 | printk(KERN_ERR PFX "No usable aperture found.\n"); | |
373 | #ifdef __x86_64__ | |
374 | /* should port this to i386 */ | |
375 | printk(KERN_ERR PFX "Consider rebooting with iommu=memaper=2 to get a good aperture.\n"); | |
376 | #endif | |
377 | return -1; | |
378 | } | |
379 | hammers[i++] = loop_dev; | |
380 | } | |
381 | nr_garts = i; | |
382 | return i == 0 ? -1 : 0; | |
383 | } | |
384 | ||
385 | /* Handle AMD 8151 quirks */ | |
386 | static void __devinit amd8151_init(struct pci_dev *pdev, struct agp_bridge_data *bridge) | |
387 | { | |
388 | char *revstring; | |
389 | u8 rev_id; | |
390 | ||
391 | pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id); | |
392 | switch (rev_id) { | |
393 | case 0x01: revstring="A0"; break; | |
394 | case 0x02: revstring="A1"; break; | |
395 | case 0x11: revstring="B0"; break; | |
396 | case 0x12: revstring="B1"; break; | |
397 | case 0x13: revstring="B2"; break; | |
398 | case 0x14: revstring="B3"; break; | |
399 | default: revstring="??"; break; | |
400 | } | |
401 | ||
402 | printk (KERN_INFO PFX "Detected AMD 8151 AGP Bridge rev %s\n", revstring); | |
403 | ||
404 | /* | |
405 | * Work around errata. | |
406 | * Chips before B2 stepping incorrectly reporting v3.5 | |
407 | */ | |
408 | if (rev_id < 0x13) { | |
409 | printk (KERN_INFO PFX "Correcting AGP revision (reports 3.5, is really 3.0)\n"); | |
410 | bridge->major_version = 3; | |
411 | bridge->minor_version = 0; | |
412 | } | |
413 | } | |
414 | ||
415 | ||
416 | static struct aper_size_info_32 uli_sizes[7] = | |
417 | { | |
418 | {256, 65536, 6, 10}, | |
419 | {128, 32768, 5, 9}, | |
420 | {64, 16384, 4, 8}, | |
421 | {32, 8192, 3, 7}, | |
422 | {16, 4096, 2, 6}, | |
423 | {8, 2048, 1, 4}, | |
424 | {4, 1024, 0, 3} | |
425 | }; | |
426 | static int __devinit uli_agp_init(struct pci_dev *pdev) | |
427 | { | |
428 | u32 httfea,baseaddr,enuscr; | |
429 | struct pci_dev *dev1; | |
430 | int i; | |
431 | unsigned size = amd64_fetch_size(); | |
432 | printk(KERN_INFO "Setting up ULi AGP. \n"); | |
433 | dev1 = pci_find_slot ((unsigned int)pdev->bus->number,PCI_DEVFN(0,0)); | |
434 | if (dev1 == NULL) { | |
435 | printk(KERN_INFO PFX "Detected a ULi chipset, " | |
436 | "but could not fine the secondary device.\n"); | |
437 | return -ENODEV; | |
438 | } | |
439 | ||
440 | for (i = 0; i < ARRAY_SIZE(uli_sizes); i++) | |
441 | if (uli_sizes[i].size == size) | |
442 | break; | |
443 | ||
444 | if (i == ARRAY_SIZE(uli_sizes)) { | |
445 | printk(KERN_INFO PFX "No ULi size found for %d\n", size); | |
446 | return -ENODEV; | |
447 | } | |
448 | ||
449 | /* shadow x86-64 registers into ULi registers */ | |
450 | pci_read_config_dword (hammers[0], AMD64_GARTAPERTUREBASE, &httfea); | |
451 | ||
452 | /* if x86-64 aperture base is beyond 4G, exit here */ | |
453 | if ((httfea & 0x7fff) >> (32 - 25)) | |
454 | return -ENODEV; | |
455 | ||
456 | httfea = (httfea& 0x7fff) << 25; | |
457 | ||
458 | pci_read_config_dword(pdev, ULI_X86_64_BASE_ADDR, &baseaddr); | |
459 | baseaddr&= ~PCI_BASE_ADDRESS_MEM_MASK; | |
460 | baseaddr|= httfea; | |
461 | pci_write_config_dword(pdev, ULI_X86_64_BASE_ADDR, baseaddr); | |
462 | ||
463 | enuscr= httfea+ (size * 1024 * 1024) - 1; | |
464 | pci_write_config_dword(dev1, ULI_X86_64_HTT_FEA_REG, httfea); | |
465 | pci_write_config_dword(dev1, ULI_X86_64_ENU_SCR_REG, enuscr); | |
466 | return 0; | |
467 | } | |
468 | ||
469 | ||
470 | static struct aper_size_info_32 nforce3_sizes[5] = | |
471 | { | |
472 | {512, 131072, 7, 0x00000000 }, | |
473 | {256, 65536, 6, 0x00000008 }, | |
474 | {128, 32768, 5, 0x0000000C }, | |
475 | {64, 16384, 4, 0x0000000E }, | |
476 | {32, 8192, 3, 0x0000000F } | |
477 | }; | |
478 | ||
479 | /* Handle shadow device of the Nvidia NForce3 */ | |
480 | /* CHECK-ME original 2.4 version set up some IORRs. Check if that is needed. */ | |
481 | static int __devinit nforce3_agp_init(struct pci_dev *pdev) | |
482 | { | |
483 | u32 tmp, apbase, apbar, aplimit; | |
484 | struct pci_dev *dev1; | |
485 | int i; | |
486 | unsigned size = amd64_fetch_size(); | |
487 | ||
488 | printk(KERN_INFO PFX "Setting up Nforce3 AGP.\n"); | |
489 | ||
490 | dev1 = pci_find_slot((unsigned int)pdev->bus->number, PCI_DEVFN(11, 0)); | |
491 | if (dev1 == NULL) { | |
492 | printk(KERN_INFO PFX "agpgart: Detected an NVIDIA " | |
493 | "nForce3 chipset, but could not find " | |
494 | "the secondary device.\n"); | |
495 | return -ENODEV; | |
496 | } | |
497 | ||
498 | for (i = 0; i < ARRAY_SIZE(nforce3_sizes); i++) | |
499 | if (nforce3_sizes[i].size == size) | |
500 | break; | |
501 | ||
502 | if (i == ARRAY_SIZE(nforce3_sizes)) { | |
503 | printk(KERN_INFO PFX "No NForce3 size found for %d\n", size); | |
504 | return -ENODEV; | |
505 | } | |
506 | ||
507 | pci_read_config_dword(dev1, NVIDIA_X86_64_1_APSIZE, &tmp); | |
508 | tmp &= ~(0xf); | |
509 | tmp |= nforce3_sizes[i].size_value; | |
510 | pci_write_config_dword(dev1, NVIDIA_X86_64_1_APSIZE, tmp); | |
511 | ||
512 | /* shadow x86-64 registers into NVIDIA registers */ | |
513 | pci_read_config_dword (hammers[0], AMD64_GARTAPERTUREBASE, &apbase); | |
514 | ||
515 | /* if x86-64 aperture base is beyond 4G, exit here */ | |
516 | if ( (apbase & 0x7fff) >> (32 - 25) ) | |
517 | return -ENODEV; | |
518 | ||
519 | apbase = (apbase & 0x7fff) << 25; | |
520 | ||
521 | pci_read_config_dword(pdev, NVIDIA_X86_64_0_APBASE, &apbar); | |
522 | apbar &= ~PCI_BASE_ADDRESS_MEM_MASK; | |
523 | apbar |= apbase; | |
524 | pci_write_config_dword(pdev, NVIDIA_X86_64_0_APBASE, apbar); | |
525 | ||
526 | aplimit = apbase + (size * 1024 * 1024) - 1; | |
527 | pci_write_config_dword(dev1, NVIDIA_X86_64_1_APBASE1, apbase); | |
528 | pci_write_config_dword(dev1, NVIDIA_X86_64_1_APLIMIT1, aplimit); | |
529 | pci_write_config_dword(dev1, NVIDIA_X86_64_1_APBASE2, apbase); | |
530 | pci_write_config_dword(dev1, NVIDIA_X86_64_1_APLIMIT2, aplimit); | |
531 | ||
532 | return 0; | |
533 | } | |
534 | ||
535 | static int __devinit agp_amd64_probe(struct pci_dev *pdev, | |
536 | const struct pci_device_id *ent) | |
537 | { | |
538 | struct agp_bridge_data *bridge; | |
539 | u8 cap_ptr; | |
540 | ||
541 | cap_ptr = pci_find_capability(pdev, PCI_CAP_ID_AGP); | |
542 | if (!cap_ptr) | |
543 | return -ENODEV; | |
544 | ||
545 | /* Could check for AGPv3 here */ | |
546 | ||
547 | bridge = agp_alloc_bridge(); | |
548 | if (!bridge) | |
549 | return -ENOMEM; | |
550 | ||
551 | if (pdev->vendor == PCI_VENDOR_ID_AMD && | |
552 | pdev->device == PCI_DEVICE_ID_AMD_8151_0) { | |
553 | amd8151_init(pdev, bridge); | |
554 | } else { | |
555 | printk(KERN_INFO PFX "Detected AGP bridge %x\n", pdev->devfn); | |
556 | } | |
557 | ||
558 | bridge->driver = &amd_8151_driver; | |
559 | bridge->dev = pdev; | |
560 | bridge->capndx = cap_ptr; | |
561 | ||
562 | /* Fill in the mode register */ | |
563 | pci_read_config_dword(pdev, bridge->capndx+PCI_AGP_STATUS, &bridge->mode); | |
564 | ||
565 | if (cache_nbs(pdev, cap_ptr) == -1) { | |
566 | agp_put_bridge(bridge); | |
567 | return -ENODEV; | |
568 | } | |
569 | ||
570 | if (pdev->vendor == PCI_VENDOR_ID_NVIDIA) { | |
571 | int ret = nforce3_agp_init(pdev); | |
572 | if (ret) { | |
573 | agp_put_bridge(bridge); | |
574 | return ret; | |
575 | } | |
576 | } | |
577 | ||
578 | if (pdev->vendor == PCI_VENDOR_ID_AL) { | |
579 | int ret = uli_agp_init(pdev); | |
580 | if (ret) { | |
581 | agp_put_bridge(bridge); | |
582 | return ret; | |
583 | } | |
584 | } | |
585 | ||
586 | pci_set_drvdata(pdev, bridge); | |
587 | return agp_add_bridge(bridge); | |
588 | } | |
589 | ||
590 | static void __devexit agp_amd64_remove(struct pci_dev *pdev) | |
591 | { | |
592 | struct agp_bridge_data *bridge = pci_get_drvdata(pdev); | |
593 | ||
07eee78e | 594 | release_mem_region(virt_to_gart(bridge->gatt_table_real), |
1da177e4 LT |
595 | amd64_aperture_sizes[bridge->aperture_size_idx].size); |
596 | agp_remove_bridge(bridge); | |
597 | agp_put_bridge(bridge); | |
598 | } | |
599 | ||
600 | static struct pci_device_id agp_amd64_pci_table[] = { | |
601 | { | |
602 | .class = (PCI_CLASS_BRIDGE_HOST << 8), | |
603 | .class_mask = ~0, | |
604 | .vendor = PCI_VENDOR_ID_AMD, | |
605 | .device = PCI_DEVICE_ID_AMD_8151_0, | |
606 | .subvendor = PCI_ANY_ID, | |
607 | .subdevice = PCI_ANY_ID, | |
608 | }, | |
609 | /* ULi M1689 */ | |
610 | { | |
611 | .class = (PCI_CLASS_BRIDGE_HOST << 8), | |
612 | .class_mask = ~0, | |
613 | .vendor = PCI_VENDOR_ID_AL, | |
614 | .device = PCI_DEVICE_ID_AL_M1689, | |
615 | .subvendor = PCI_ANY_ID, | |
616 | .subdevice = PCI_ANY_ID, | |
617 | }, | |
618 | /* VIA K8T800Pro */ | |
619 | { | |
620 | .class = (PCI_CLASS_BRIDGE_HOST << 8), | |
621 | .class_mask = ~0, | |
622 | .vendor = PCI_VENDOR_ID_VIA, | |
623 | .device = PCI_DEVICE_ID_VIA_K8T800PRO_0, | |
624 | .subvendor = PCI_ANY_ID, | |
625 | .subdevice = PCI_ANY_ID, | |
626 | }, | |
627 | /* VIA K8T800 */ | |
628 | { | |
629 | .class = (PCI_CLASS_BRIDGE_HOST << 8), | |
630 | .class_mask = ~0, | |
631 | .vendor = PCI_VENDOR_ID_VIA, | |
632 | .device = PCI_DEVICE_ID_VIA_8385_0, | |
633 | .subvendor = PCI_ANY_ID, | |
634 | .subdevice = PCI_ANY_ID, | |
635 | }, | |
636 | /* VIA K8M800 / K8N800 */ | |
637 | { | |
638 | .class = (PCI_CLASS_BRIDGE_HOST << 8), | |
639 | .class_mask = ~0, | |
640 | .vendor = PCI_VENDOR_ID_VIA, | |
641 | .device = PCI_DEVICE_ID_VIA_8380_0, | |
642 | .subvendor = PCI_ANY_ID, | |
643 | .subdevice = PCI_ANY_ID, | |
644 | }, | |
645 | /* VIA K8T890 */ | |
646 | { | |
647 | .class = (PCI_CLASS_BRIDGE_HOST << 8), | |
648 | .class_mask = ~0, | |
649 | .vendor = PCI_VENDOR_ID_VIA, | |
650 | .device = PCI_DEVICE_ID_VIA_3238_0, | |
651 | .subvendor = PCI_ANY_ID, | |
652 | .subdevice = PCI_ANY_ID, | |
653 | }, | |
654 | /* VIA K8T800/K8M800/K8N800 */ | |
655 | { | |
656 | .class = (PCI_CLASS_BRIDGE_HOST << 8), | |
657 | .class_mask = ~0, | |
658 | .vendor = PCI_VENDOR_ID_VIA, | |
659 | .device = PCI_DEVICE_ID_VIA_838X_1, | |
660 | .subvendor = PCI_ANY_ID, | |
661 | .subdevice = PCI_ANY_ID, | |
662 | }, | |
663 | /* NForce3 */ | |
664 | { | |
665 | .class = (PCI_CLASS_BRIDGE_HOST << 8), | |
666 | .class_mask = ~0, | |
667 | .vendor = PCI_VENDOR_ID_NVIDIA, | |
668 | .device = PCI_DEVICE_ID_NVIDIA_NFORCE3, | |
669 | .subvendor = PCI_ANY_ID, | |
670 | .subdevice = PCI_ANY_ID, | |
671 | }, | |
672 | { | |
673 | .class = (PCI_CLASS_BRIDGE_HOST << 8), | |
674 | .class_mask = ~0, | |
675 | .vendor = PCI_VENDOR_ID_NVIDIA, | |
676 | .device = PCI_DEVICE_ID_NVIDIA_NFORCE3S, | |
677 | .subvendor = PCI_ANY_ID, | |
678 | .subdevice = PCI_ANY_ID, | |
679 | }, | |
680 | /* SIS 755 */ | |
681 | { | |
682 | .class = (PCI_CLASS_BRIDGE_HOST << 8), | |
683 | .class_mask = ~0, | |
684 | .vendor = PCI_VENDOR_ID_SI, | |
685 | .device = PCI_DEVICE_ID_SI_755, | |
686 | .subvendor = PCI_ANY_ID, | |
687 | .subdevice = PCI_ANY_ID, | |
688 | }, | |
2fa938b8 DJ |
689 | /* SIS 760 */ |
690 | { | |
691 | .class = (PCI_CLASS_BRIDGE_HOST << 8), | |
692 | .class_mask = ~0, | |
693 | .vendor = PCI_VENDOR_ID_SI, | |
694 | .device = PCI_DEVICE_ID_SI_760, | |
695 | .subvendor = PCI_ANY_ID, | |
696 | .subdevice = PCI_ANY_ID, | |
697 | }, | |
1da177e4 LT |
698 | { } |
699 | }; | |
700 | ||
701 | MODULE_DEVICE_TABLE(pci, agp_amd64_pci_table); | |
702 | ||
703 | static struct pci_driver agp_amd64_pci_driver = { | |
704 | .name = "agpgart-amd64", | |
705 | .id_table = agp_amd64_pci_table, | |
706 | .probe = agp_amd64_probe, | |
707 | .remove = agp_amd64_remove, | |
708 | }; | |
709 | ||
710 | ||
711 | /* Not static due to IOMMU code calling it early. */ | |
712 | int __init agp_amd64_init(void) | |
713 | { | |
714 | int err = 0; | |
715 | static struct pci_device_id amd64nb[] = { | |
716 | { PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1103) }, | |
717 | { }, | |
718 | }; | |
719 | ||
720 | if (agp_off) | |
721 | return -EINVAL; | |
722 | if (pci_register_driver(&agp_amd64_pci_driver) > 0) { | |
723 | struct pci_dev *dev; | |
724 | if (!agp_try_unsupported && !agp_try_unsupported_boot) { | |
725 | printk(KERN_INFO PFX "No supported AGP bridge found.\n"); | |
726 | #ifdef MODULE | |
727 | printk(KERN_INFO PFX "You can try agp_try_unsupported=1\n"); | |
728 | #else | |
729 | printk(KERN_INFO PFX "You can boot with agp=try_unsupported\n"); | |
730 | #endif | |
731 | return -ENODEV; | |
732 | } | |
733 | ||
734 | /* First check that we have at least one AMD64 NB */ | |
735 | if (!pci_dev_present(amd64nb)) | |
736 | return -ENODEV; | |
737 | ||
738 | /* Look for any AGP bridge */ | |
739 | dev = NULL; | |
740 | err = -ENODEV; | |
741 | for_each_pci_dev(dev) { | |
742 | if (!pci_find_capability(dev, PCI_CAP_ID_AGP)) | |
743 | continue; | |
744 | /* Only one bridge supported right now */ | |
745 | if (agp_amd64_probe(dev, NULL) == 0) { | |
746 | err = 0; | |
747 | break; | |
748 | } | |
749 | } | |
750 | } | |
751 | return err; | |
752 | } | |
753 | ||
754 | static void __exit agp_amd64_cleanup(void) | |
755 | { | |
756 | if (aperture_resource) | |
757 | release_resource(aperture_resource); | |
758 | pci_unregister_driver(&agp_amd64_pci_driver); | |
759 | } | |
760 | ||
761 | /* On AMD64 the PCI driver needs to initialize this driver early | |
762 | for the IOMMU, so it has to be called via a backdoor. */ | |
763 | #ifndef CONFIG_GART_IOMMU | |
764 | module_init(agp_amd64_init); | |
765 | module_exit(agp_amd64_cleanup); | |
766 | #endif | |
767 | ||
768 | MODULE_AUTHOR("Dave Jones <davej@codemonkey.org.uk>, Andi Kleen"); | |
769 | module_param(agp_try_unsupported, bool, 0); | |
770 | MODULE_LICENSE("GPL"); |