]>
Commit | Line | Data |
---|---|---|
09c434b8 | 1 | // SPDX-License-Identifier: GPL-2.0-only |
1da177e4 LT |
2 | /* Derived from Applicom driver ac.c for SCO Unix */ |
3 | /* Ported by David Woodhouse, Axiom (Cambridge) Ltd. */ | |
4 | /* dwmw2@infradead.org 30/8/98 */ | |
5 | /* $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ */ | |
6 | /* This module is for Linux 2.1 and 2.2 series kernels. */ | |
7 | /*****************************************************************************/ | |
8 | /* J PAGET 18/02/94 passage V2.4.2 ioctl avec code 2 reset to les interrupt */ | |
9 | /* ceci pour reseter correctement apres une sortie sauvage */ | |
10 | /* J PAGET 02/05/94 passage V2.4.3 dans le traitement de d'interruption, */ | |
11 | /* LoopCount n'etait pas initialise a 0. */ | |
12 | /* F LAFORSE 04/07/95 version V2.6.0 lecture bidon apres acces a une carte */ | |
13 | /* pour liberer le bus */ | |
14 | /* J.PAGET 19/11/95 version V2.6.1 Nombre, addresse,irq n'est plus configure */ | |
15 | /* et passe en argument a acinit, mais est scrute sur le bus pour s'adapter */ | |
16 | /* au nombre de cartes presentes sur le bus. IOCL code 6 affichait V2.4.3 */ | |
17 | /* F.LAFORSE 28/11/95 creation de fichiers acXX.o avec les differentes */ | |
3ad2f3fb | 18 | /* addresses de base des cartes, IOCTL 6 plus complet */ |
1da177e4 LT |
19 | /* J.PAGET le 19/08/96 copie de la version V2.6 en V2.8.0 sans modification */ |
20 | /* de code autre que le texte V2.6.1 en V2.8.0 */ | |
21 | /*****************************************************************************/ | |
22 | ||
23 | ||
24 | #include <linux/kernel.h> | |
25 | #include <linux/module.h> | |
26 | #include <linux/interrupt.h> | |
174cd4b1 | 27 | #include <linux/sched/signal.h> |
1da177e4 LT |
28 | #include <linux/slab.h> |
29 | #include <linux/errno.h> | |
613655fa | 30 | #include <linux/mutex.h> |
1da177e4 LT |
31 | #include <linux/miscdevice.h> |
32 | #include <linux/pci.h> | |
33 | #include <linux/wait.h> | |
34 | #include <linux/init.h> | |
35 | #include <linux/fs.h> | |
d7ac3c6e | 36 | #include <linux/nospec.h> |
1da177e4 LT |
37 | |
38 | #include <asm/io.h> | |
7c0f6ba6 | 39 | #include <linux/uaccess.h> |
1da177e4 LT |
40 | |
41 | #include "applicom.h" | |
42 | ||
43 | ||
44 | /* NOTE: We use for loops with {write,read}b() instead of | |
45 | memcpy_{from,to}io throughout this driver. This is because | |
46 | the board doesn't correctly handle word accesses - only | |
47 | bytes. | |
48 | */ | |
49 | ||
50 | ||
51 | #undef DEBUG | |
52 | ||
53 | #define MAX_BOARD 8 /* maximum of pc board possible */ | |
54 | #define MAX_ISA_BOARD 4 | |
55 | #define LEN_RAM_IO 0x800 | |
1da177e4 LT |
56 | |
57 | #ifndef PCI_VENDOR_ID_APPLICOM | |
58 | #define PCI_VENDOR_ID_APPLICOM 0x1389 | |
59 | #define PCI_DEVICE_ID_APPLICOM_PCIGENERIC 0x0001 | |
60 | #define PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN 0x0002 | |
61 | #define PCI_DEVICE_ID_APPLICOM_PCI2000PFB 0x0003 | |
62 | #endif | |
1da177e4 | 63 | |
613655fa | 64 | static DEFINE_MUTEX(ac_mutex); |
1da177e4 LT |
65 | static char *applicom_pci_devnames[] = { |
66 | "PCI board", | |
67 | "PCI2000IBS / PCI2000CAN", | |
68 | "PCI2000PFB" | |
69 | }; | |
70 | ||
2c9c4ae6 | 71 | static const struct pci_device_id applicom_pci_tbl[] = { |
53a7a1bb JS |
72 | { PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCIGENERIC) }, |
73 | { PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN) }, | |
74 | { PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCI2000PFB) }, | |
1da177e4 LT |
75 | { 0 } |
76 | }; | |
77 | MODULE_DEVICE_TABLE(pci, applicom_pci_tbl); | |
78 | ||
79 | MODULE_AUTHOR("David Woodhouse & Applicom International"); | |
80 | MODULE_DESCRIPTION("Driver for Applicom Profibus card"); | |
81 | MODULE_LICENSE("GPL"); | |
14f8d3ff | 82 | MODULE_ALIAS_MISCDEV(AC_MINOR); |
1da177e4 LT |
83 | |
84 | MODULE_SUPPORTED_DEVICE("ac"); | |
85 | ||
86 | ||
87 | static struct applicom_board { | |
88 | unsigned long PhysIO; | |
89 | void __iomem *RamIO; | |
90 | wait_queue_head_t FlagSleepSend; | |
91 | long irq; | |
92 | spinlock_t mutex; | |
93 | } apbs[MAX_BOARD]; | |
94 | ||
95 | static unsigned int irq = 0; /* interrupt number IRQ */ | |
96 | static unsigned long mem = 0; /* physical segment of board */ | |
97 | ||
1c37ab5e | 98 | module_param_hw(irq, uint, irq, 0); |
1da177e4 | 99 | MODULE_PARM_DESC(irq, "IRQ of the Applicom board"); |
1c37ab5e | 100 | module_param_hw(mem, ulong, iomem, 0); |
1da177e4 LT |
101 | MODULE_PARM_DESC(mem, "Shared Memory Address of Applicom board"); |
102 | ||
103 | static unsigned int numboards; /* number of installed boards */ | |
104 | static volatile unsigned char Dummy; | |
105 | static DECLARE_WAIT_QUEUE_HEAD(FlagSleepRec); | |
106 | static unsigned int WriteErrorCount; /* number of write error */ | |
107 | static unsigned int ReadErrorCount; /* number of read error */ | |
108 | static unsigned int DeviceErrorCount; /* number of device error */ | |
109 | ||
110 | static ssize_t ac_read (struct file *, char __user *, size_t, loff_t *); | |
111 | static ssize_t ac_write (struct file *, const char __user *, size_t, loff_t *); | |
55929332 | 112 | static long ac_ioctl(struct file *, unsigned int, unsigned long); |
7d12e780 | 113 | static irqreturn_t ac_interrupt(int, void *); |
1da177e4 | 114 | |
62322d25 | 115 | static const struct file_operations ac_fops = { |
1da177e4 LT |
116 | .owner = THIS_MODULE, |
117 | .llseek = no_llseek, | |
118 | .read = ac_read, | |
119 | .write = ac_write, | |
55929332 | 120 | .unlocked_ioctl = ac_ioctl, |
1da177e4 LT |
121 | }; |
122 | ||
123 | static struct miscdevice ac_miscdev = { | |
124 | AC_MINOR, | |
125 | "ac", | |
126 | &ac_fops | |
127 | }; | |
128 | ||
129 | static int dummy; /* dev_id for request_irq() */ | |
130 | ||
131 | static int ac_register_board(unsigned long physloc, void __iomem *loc, | |
132 | unsigned char boardno) | |
133 | { | |
134 | volatile unsigned char byte_reset_it; | |
135 | ||
136 | if((readb(loc + CONF_END_TEST) != 0x00) || | |
137 | (readb(loc + CONF_END_TEST + 1) != 0x55) || | |
138 | (readb(loc + CONF_END_TEST + 2) != 0xAA) || | |
139 | (readb(loc + CONF_END_TEST + 3) != 0xFF)) | |
140 | return 0; | |
141 | ||
142 | if (!boardno) | |
143 | boardno = readb(loc + NUMCARD_OWNER_TO_PC); | |
144 | ||
e60b6e2f | 145 | if (!boardno || boardno > MAX_BOARD) { |
1da177e4 LT |
146 | printk(KERN_WARNING "Board #%d (at 0x%lx) is out of range (1 <= x <= %d).\n", |
147 | boardno, physloc, MAX_BOARD); | |
148 | return 0; | |
149 | } | |
150 | ||
151 | if (apbs[boardno - 1].RamIO) { | |
152 | printk(KERN_WARNING "Board #%d (at 0x%lx) conflicts with previous board #%d (at 0x%lx)\n", | |
153 | boardno, physloc, boardno, apbs[boardno-1].PhysIO); | |
154 | return 0; | |
155 | } | |
156 | ||
157 | boardno--; | |
158 | ||
159 | apbs[boardno].PhysIO = physloc; | |
160 | apbs[boardno].RamIO = loc; | |
161 | init_waitqueue_head(&apbs[boardno].FlagSleepSend); | |
162 | spin_lock_init(&apbs[boardno].mutex); | |
163 | byte_reset_it = readb(loc + RAM_IT_TO_PC); | |
164 | ||
165 | numboards++; | |
166 | return boardno + 1; | |
167 | } | |
168 | ||
2e611390 | 169 | static void __exit applicom_exit(void) |
1da177e4 | 170 | { |
819a3eba | 171 | unsigned int i; |
1da177e4 LT |
172 | |
173 | misc_deregister(&ac_miscdev); | |
174 | ||
175 | for (i = 0; i < MAX_BOARD; i++) { | |
176 | ||
177 | if (!apbs[i].RamIO) | |
178 | continue; | |
179 | ||
180 | if (apbs[i].irq) | |
181 | free_irq(apbs[i].irq, &dummy); | |
182 | ||
183 | iounmap(apbs[i].RamIO); | |
184 | } | |
185 | } | |
186 | ||
2e611390 | 187 | static int __init applicom_init(void) |
1da177e4 LT |
188 | { |
189 | int i, numisa = 0; | |
190 | struct pci_dev *dev = NULL; | |
191 | void __iomem *RamIO; | |
819a3eba | 192 | int boardno, ret; |
1da177e4 LT |
193 | |
194 | printk(KERN_INFO "Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $\n"); | |
195 | ||
196 | /* No mem and irq given - check for a PCI card */ | |
197 | ||
198 | while ( (dev = pci_get_class(PCI_CLASS_OTHERS << 16, dev))) { | |
199 | ||
53a7a1bb | 200 | if (!pci_match_id(applicom_pci_tbl, dev)) |
1da177e4 LT |
201 | continue; |
202 | ||
203 | if (pci_enable_device(dev)) | |
204 | return -EIO; | |
205 | ||
4bdc0d67 | 206 | RamIO = ioremap(pci_resource_start(dev, 0), LEN_RAM_IO); |
1da177e4 LT |
207 | |
208 | if (!RamIO) { | |
e29419ff GKH |
209 | printk(KERN_INFO "ac.o: Failed to ioremap PCI memory " |
210 | "space at 0x%llx\n", | |
55b29a72 | 211 | (unsigned long long)pci_resource_start(dev, 0)); |
1da177e4 LT |
212 | pci_disable_device(dev); |
213 | return -EIO; | |
214 | } | |
215 | ||
e29419ff GKH |
216 | printk(KERN_INFO "Applicom %s found at mem 0x%llx, irq %d\n", |
217 | applicom_pci_devnames[dev->device-1], | |
55b29a72 | 218 | (unsigned long long)pci_resource_start(dev, 0), |
1da177e4 LT |
219 | dev->irq); |
220 | ||
55b29a72 JS |
221 | boardno = ac_register_board(pci_resource_start(dev, 0), |
222 | RamIO, 0); | |
1da177e4 LT |
223 | if (!boardno) { |
224 | printk(KERN_INFO "ac.o: PCI Applicom device doesn't have correct signature.\n"); | |
225 | iounmap(RamIO); | |
226 | pci_disable_device(dev); | |
227 | continue; | |
228 | } | |
229 | ||
0f2ed4c6 | 230 | if (request_irq(dev->irq, &ac_interrupt, IRQF_SHARED, "Applicom PCI", &dummy)) { |
1da177e4 LT |
231 | printk(KERN_INFO "Could not allocate IRQ %d for PCI Applicom device.\n", dev->irq); |
232 | iounmap(RamIO); | |
233 | pci_disable_device(dev); | |
234 | apbs[boardno - 1].RamIO = NULL; | |
235 | continue; | |
236 | } | |
237 | ||
238 | /* Enable interrupts. */ | |
239 | ||
240 | writeb(0x40, apbs[boardno - 1].RamIO + RAM_IT_FROM_PC); | |
241 | ||
242 | apbs[boardno - 1].irq = dev->irq; | |
243 | } | |
244 | ||
245 | /* Finished with PCI cards. If none registered, | |
246 | * and there was no mem/irq specified, exit */ | |
247 | ||
248 | if (!mem || !irq) { | |
249 | if (numboards) | |
250 | goto fin; | |
251 | else { | |
252 | printk(KERN_INFO "ac.o: No PCI boards found.\n"); | |
253 | printk(KERN_INFO "ac.o: For an ISA board you must supply memory and irq parameters.\n"); | |
254 | return -ENXIO; | |
255 | } | |
256 | } | |
257 | ||
258 | /* Now try the specified ISA cards */ | |
259 | ||
260 | for (i = 0; i < MAX_ISA_BOARD; i++) { | |
4bdc0d67 | 261 | RamIO = ioremap(mem + (LEN_RAM_IO * i), LEN_RAM_IO); |
1da177e4 LT |
262 | |
263 | if (!RamIO) { | |
264 | printk(KERN_INFO "ac.o: Failed to ioremap the ISA card's memory space (slot #%d)\n", i + 1); | |
265 | continue; | |
266 | } | |
267 | ||
268 | if (!(boardno = ac_register_board((unsigned long)mem+ (LEN_RAM_IO*i), | |
269 | RamIO,i+1))) { | |
270 | iounmap(RamIO); | |
271 | continue; | |
272 | } | |
273 | ||
274 | printk(KERN_NOTICE "Applicom ISA card found at mem 0x%lx, irq %d\n", mem + (LEN_RAM_IO*i), irq); | |
275 | ||
276 | if (!numisa) { | |
0f2ed4c6 | 277 | if (request_irq(irq, &ac_interrupt, IRQF_SHARED, "Applicom ISA", &dummy)) { |
1da177e4 LT |
278 | printk(KERN_WARNING "Could not allocate IRQ %d for ISA Applicom device.\n", irq); |
279 | iounmap(RamIO); | |
280 | apbs[boardno - 1].RamIO = NULL; | |
281 | } | |
282 | else | |
283 | apbs[boardno - 1].irq = irq; | |
284 | } | |
285 | else | |
286 | apbs[boardno - 1].irq = 0; | |
287 | ||
288 | numisa++; | |
289 | } | |
290 | ||
291 | if (!numisa) | |
819a3eba CL |
292 | printk(KERN_WARNING "ac.o: No valid ISA Applicom boards found " |
293 | "at mem 0x%lx\n", mem); | |
1da177e4 LT |
294 | |
295 | fin: | |
296 | init_waitqueue_head(&FlagSleepRec); | |
297 | ||
298 | WriteErrorCount = 0; | |
299 | ReadErrorCount = 0; | |
300 | DeviceErrorCount = 0; | |
301 | ||
302 | if (numboards) { | |
819a3eba CL |
303 | ret = misc_register(&ac_miscdev); |
304 | if (ret) { | |
305 | printk(KERN_WARNING "ac.o: Unable to register misc device\n"); | |
306 | goto out; | |
307 | } | |
1da177e4 LT |
308 | for (i = 0; i < MAX_BOARD; i++) { |
309 | int serial; | |
310 | char boardname[(SERIAL_NUMBER - TYPE_CARD) + 1]; | |
311 | ||
312 | if (!apbs[i].RamIO) | |
313 | continue; | |
314 | ||
315 | for (serial = 0; serial < SERIAL_NUMBER - TYPE_CARD; serial++) | |
316 | boardname[serial] = readb(apbs[i].RamIO + TYPE_CARD + serial); | |
317 | ||
318 | boardname[serial] = 0; | |
319 | ||
320 | ||
321 | printk(KERN_INFO "Applicom board %d: %s, PROM V%d.%d", | |
322 | i+1, boardname, | |
323 | (int)(readb(apbs[i].RamIO + VERS) >> 4), | |
324 | (int)(readb(apbs[i].RamIO + VERS) & 0xF)); | |
325 | ||
326 | serial = (readb(apbs[i].RamIO + SERIAL_NUMBER) << 16) + | |
327 | (readb(apbs[i].RamIO + SERIAL_NUMBER + 1) << 8) + | |
328 | (readb(apbs[i].RamIO + SERIAL_NUMBER + 2) ); | |
329 | ||
330 | if (serial != 0) | |
331 | printk(" S/N %d\n", serial); | |
332 | else | |
333 | printk("\n"); | |
334 | } | |
335 | return 0; | |
336 | } | |
337 | ||
338 | else | |
339 | return -ENXIO; | |
819a3eba CL |
340 | |
341 | out: | |
342 | for (i = 0; i < MAX_BOARD; i++) { | |
343 | if (!apbs[i].RamIO) | |
344 | continue; | |
345 | if (apbs[i].irq) | |
346 | free_irq(apbs[i].irq, &dummy); | |
347 | iounmap(apbs[i].RamIO); | |
348 | } | |
819a3eba | 349 | return ret; |
1da177e4 LT |
350 | } |
351 | ||
2e611390 AB |
352 | module_init(applicom_init); |
353 | module_exit(applicom_exit); | |
1da177e4 | 354 | |
1da177e4 LT |
355 | |
356 | static ssize_t ac_write(struct file *file, const char __user *buf, size_t count, loff_t * ppos) | |
357 | { | |
358 | unsigned int NumCard; /* Board number 1 -> 8 */ | |
359 | unsigned int IndexCard; /* Index board number 0 -> 7 */ | |
360 | unsigned char TicCard; /* Board TIC to send */ | |
361 | unsigned long flags; /* Current priority */ | |
362 | struct st_ram_io st_loc; | |
363 | struct mailbox tmpmailbox; | |
364 | #ifdef DEBUG | |
365 | int c; | |
366 | #endif | |
367 | DECLARE_WAITQUEUE(wait, current); | |
368 | ||
369 | if (count != sizeof(struct st_ram_io) + sizeof(struct mailbox)) { | |
370 | static int warncount = 5; | |
371 | if (warncount) { | |
372 | printk(KERN_INFO "Hmmm. write() of Applicom card, length %zd != expected %zd\n", | |
373 | count, sizeof(struct st_ram_io) + sizeof(struct mailbox)); | |
374 | warncount--; | |
375 | } | |
376 | return -EINVAL; | |
377 | } | |
378 | ||
379 | if(copy_from_user(&st_loc, buf, sizeof(struct st_ram_io))) | |
380 | return -EFAULT; | |
381 | ||
382 | if(copy_from_user(&tmpmailbox, &buf[sizeof(struct st_ram_io)], | |
383 | sizeof(struct mailbox))) | |
384 | return -EFAULT; | |
385 | ||
386 | NumCard = st_loc.num_card; /* board number to send */ | |
387 | TicCard = st_loc.tic_des_from_pc; /* tic number to send */ | |
388 | IndexCard = NumCard - 1; | |
389 | ||
d7ac3c6e GS |
390 | if (IndexCard >= MAX_BOARD) |
391 | return -EINVAL; | |
392 | IndexCard = array_index_nospec(IndexCard, MAX_BOARD); | |
393 | ||
394 | if (!apbs[IndexCard].RamIO) | |
1da177e4 LT |
395 | return -EINVAL; |
396 | ||
397 | #ifdef DEBUG | |
398 | printk("Write to applicom card #%d. struct st_ram_io follows:", | |
399 | IndexCard+1); | |
400 | ||
401 | for (c = 0; c < sizeof(struct st_ram_io);) { | |
402 | ||
403 | printk("\n%5.5X: %2.2X", c, ((unsigned char *) &st_loc)[c]); | |
404 | ||
405 | for (c++; c % 8 && c < sizeof(struct st_ram_io); c++) { | |
406 | printk(" %2.2X", ((unsigned char *) &st_loc)[c]); | |
407 | } | |
408 | } | |
409 | ||
410 | printk("\nstruct mailbox follows:"); | |
411 | ||
412 | for (c = 0; c < sizeof(struct mailbox);) { | |
413 | printk("\n%5.5X: %2.2X", c, ((unsigned char *) &tmpmailbox)[c]); | |
414 | ||
415 | for (c++; c % 8 && c < sizeof(struct mailbox); c++) { | |
416 | printk(" %2.2X", ((unsigned char *) &tmpmailbox)[c]); | |
417 | } | |
418 | } | |
419 | ||
420 | printk("\n"); | |
421 | #endif | |
422 | ||
423 | spin_lock_irqsave(&apbs[IndexCard].mutex, flags); | |
424 | ||
425 | /* Test octet ready correct */ | |
426 | if(readb(apbs[IndexCard].RamIO + DATA_FROM_PC_READY) > 2) { | |
427 | Dummy = readb(apbs[IndexCard].RamIO + VERS); | |
428 | spin_unlock_irqrestore(&apbs[IndexCard].mutex, flags); | |
429 | printk(KERN_WARNING "APPLICOM driver write error board %d, DataFromPcReady = %d\n", | |
430 | IndexCard,(int)readb(apbs[IndexCard].RamIO + DATA_FROM_PC_READY)); | |
431 | DeviceErrorCount++; | |
432 | return -EIO; | |
433 | } | |
434 | ||
435 | /* Place ourselves on the wait queue */ | |
436 | set_current_state(TASK_INTERRUPTIBLE); | |
437 | add_wait_queue(&apbs[IndexCard].FlagSleepSend, &wait); | |
438 | ||
439 | /* Check whether the card is ready for us */ | |
440 | while (readb(apbs[IndexCard].RamIO + DATA_FROM_PC_READY) != 0) { | |
441 | Dummy = readb(apbs[IndexCard].RamIO + VERS); | |
442 | /* It's busy. Sleep. */ | |
443 | ||
444 | spin_unlock_irqrestore(&apbs[IndexCard].mutex, flags); | |
445 | schedule(); | |
446 | if (signal_pending(current)) { | |
447 | remove_wait_queue(&apbs[IndexCard].FlagSleepSend, | |
448 | &wait); | |
449 | return -EINTR; | |
450 | } | |
451 | spin_lock_irqsave(&apbs[IndexCard].mutex, flags); | |
452 | set_current_state(TASK_INTERRUPTIBLE); | |
453 | } | |
454 | ||
455 | /* We may not have actually slept */ | |
456 | set_current_state(TASK_RUNNING); | |
457 | remove_wait_queue(&apbs[IndexCard].FlagSleepSend, &wait); | |
458 | ||
459 | writeb(1, apbs[IndexCard].RamIO + DATA_FROM_PC_READY); | |
460 | ||
461 | /* Which is best - lock down the pages with rawio and then | |
462 | copy directly, or use bounce buffers? For now we do the latter | |
463 | because it works with 2.2 still */ | |
464 | { | |
465 | unsigned char *from = (unsigned char *) &tmpmailbox; | |
466 | void __iomem *to = apbs[IndexCard].RamIO + RAM_FROM_PC; | |
467 | int c; | |
468 | ||
469 | for (c = 0; c < sizeof(struct mailbox); c++) | |
470 | writeb(*(from++), to++); | |
471 | } | |
472 | ||
473 | writeb(0x20, apbs[IndexCard].RamIO + TIC_OWNER_FROM_PC); | |
474 | writeb(0xff, apbs[IndexCard].RamIO + NUMCARD_OWNER_FROM_PC); | |
475 | writeb(TicCard, apbs[IndexCard].RamIO + TIC_DES_FROM_PC); | |
476 | writeb(NumCard, apbs[IndexCard].RamIO + NUMCARD_DES_FROM_PC); | |
477 | writeb(2, apbs[IndexCard].RamIO + DATA_FROM_PC_READY); | |
478 | writeb(1, apbs[IndexCard].RamIO + RAM_IT_FROM_PC); | |
479 | Dummy = readb(apbs[IndexCard].RamIO + VERS); | |
480 | spin_unlock_irqrestore(&apbs[IndexCard].mutex, flags); | |
481 | return 0; | |
482 | } | |
483 | ||
484 | static int do_ac_read(int IndexCard, char __user *buf, | |
485 | struct st_ram_io *st_loc, struct mailbox *mailbox) | |
486 | { | |
487 | void __iomem *from = apbs[IndexCard].RamIO + RAM_TO_PC; | |
bc20589b | 488 | unsigned char *to = (unsigned char *)mailbox; |
1da177e4 LT |
489 | #ifdef DEBUG |
490 | int c; | |
491 | #endif | |
492 | ||
493 | st_loc->tic_owner_to_pc = readb(apbs[IndexCard].RamIO + TIC_OWNER_TO_PC); | |
494 | st_loc->numcard_owner_to_pc = readb(apbs[IndexCard].RamIO + NUMCARD_OWNER_TO_PC); | |
495 | ||
496 | ||
497 | { | |
498 | int c; | |
499 | ||
500 | for (c = 0; c < sizeof(struct mailbox); c++) | |
501 | *(to++) = readb(from++); | |
502 | } | |
503 | writeb(1, apbs[IndexCard].RamIO + ACK_FROM_PC_READY); | |
504 | writeb(1, apbs[IndexCard].RamIO + TYP_ACK_FROM_PC); | |
505 | writeb(IndexCard+1, apbs[IndexCard].RamIO + NUMCARD_ACK_FROM_PC); | |
506 | writeb(readb(apbs[IndexCard].RamIO + TIC_OWNER_TO_PC), | |
507 | apbs[IndexCard].RamIO + TIC_ACK_FROM_PC); | |
508 | writeb(2, apbs[IndexCard].RamIO + ACK_FROM_PC_READY); | |
509 | writeb(0, apbs[IndexCard].RamIO + DATA_TO_PC_READY); | |
510 | writeb(2, apbs[IndexCard].RamIO + RAM_IT_FROM_PC); | |
511 | Dummy = readb(apbs[IndexCard].RamIO + VERS); | |
512 | ||
513 | #ifdef DEBUG | |
514 | printk("Read from applicom card #%d. struct st_ram_io follows:", NumCard); | |
515 | ||
516 | for (c = 0; c < sizeof(struct st_ram_io);) { | |
517 | printk("\n%5.5X: %2.2X", c, ((unsigned char *)st_loc)[c]); | |
518 | ||
519 | for (c++; c % 8 && c < sizeof(struct st_ram_io); c++) { | |
520 | printk(" %2.2X", ((unsigned char *)st_loc)[c]); | |
521 | } | |
522 | } | |
523 | ||
524 | printk("\nstruct mailbox follows:"); | |
525 | ||
526 | for (c = 0; c < sizeof(struct mailbox);) { | |
527 | printk("\n%5.5X: %2.2X", c, ((unsigned char *)mailbox)[c]); | |
528 | ||
529 | for (c++; c % 8 && c < sizeof(struct mailbox); c++) { | |
530 | printk(" %2.2X", ((unsigned char *)mailbox)[c]); | |
531 | } | |
532 | } | |
533 | printk("\n"); | |
534 | #endif | |
535 | return (sizeof(struct st_ram_io) + sizeof(struct mailbox)); | |
536 | } | |
537 | ||
538 | static ssize_t ac_read (struct file *filp, char __user *buf, size_t count, loff_t *ptr) | |
539 | { | |
540 | unsigned long flags; | |
541 | unsigned int i; | |
542 | unsigned char tmp; | |
543 | int ret = 0; | |
544 | DECLARE_WAITQUEUE(wait, current); | |
545 | #ifdef DEBUG | |
546 | int loopcount=0; | |
547 | #endif | |
548 | /* No need to ratelimit this. Only root can trigger it anyway */ | |
549 | if (count != sizeof(struct st_ram_io) + sizeof(struct mailbox)) { | |
550 | printk( KERN_WARNING "Hmmm. read() of Applicom card, length %zd != expected %zd\n", | |
551 | count,sizeof(struct st_ram_io) + sizeof(struct mailbox)); | |
552 | return -EINVAL; | |
553 | } | |
554 | ||
555 | while(1) { | |
556 | /* Stick ourself on the wait queue */ | |
557 | set_current_state(TASK_INTERRUPTIBLE); | |
558 | add_wait_queue(&FlagSleepRec, &wait); | |
559 | ||
560 | /* Scan each board, looking for one which has a packet for us */ | |
561 | for (i=0; i < MAX_BOARD; i++) { | |
562 | if (!apbs[i].RamIO) | |
563 | continue; | |
564 | spin_lock_irqsave(&apbs[i].mutex, flags); | |
565 | ||
566 | tmp = readb(apbs[i].RamIO + DATA_TO_PC_READY); | |
567 | ||
568 | if (tmp == 2) { | |
569 | struct st_ram_io st_loc; | |
570 | struct mailbox mailbox; | |
571 | ||
572 | /* Got a packet for us */ | |
19714a8a | 573 | memset(&st_loc, 0, sizeof(st_loc)); |
1da177e4 LT |
574 | ret = do_ac_read(i, buf, &st_loc, &mailbox); |
575 | spin_unlock_irqrestore(&apbs[i].mutex, flags); | |
576 | set_current_state(TASK_RUNNING); | |
577 | remove_wait_queue(&FlagSleepRec, &wait); | |
578 | ||
579 | if (copy_to_user(buf, &st_loc, sizeof(st_loc))) | |
580 | return -EFAULT; | |
581 | if (copy_to_user(buf + sizeof(st_loc), &mailbox, sizeof(mailbox))) | |
582 | return -EFAULT; | |
583 | return tmp; | |
584 | } | |
585 | ||
586 | if (tmp > 2) { | |
587 | /* Got an error */ | |
588 | Dummy = readb(apbs[i].RamIO + VERS); | |
589 | ||
590 | spin_unlock_irqrestore(&apbs[i].mutex, flags); | |
591 | set_current_state(TASK_RUNNING); | |
592 | remove_wait_queue(&FlagSleepRec, &wait); | |
593 | ||
594 | printk(KERN_WARNING "APPLICOM driver read error board %d, DataToPcReady = %d\n", | |
595 | i,(int)readb(apbs[i].RamIO + DATA_TO_PC_READY)); | |
596 | DeviceErrorCount++; | |
597 | return -EIO; | |
598 | } | |
599 | ||
600 | /* Nothing for us. Try the next board */ | |
601 | Dummy = readb(apbs[i].RamIO + VERS); | |
602 | spin_unlock_irqrestore(&apbs[i].mutex, flags); | |
603 | ||
604 | } /* per board */ | |
605 | ||
606 | /* OK - No boards had data for us. Sleep now */ | |
607 | ||
608 | schedule(); | |
609 | remove_wait_queue(&FlagSleepRec, &wait); | |
610 | ||
611 | if (signal_pending(current)) | |
612 | return -EINTR; | |
613 | ||
614 | #ifdef DEBUG | |
615 | if (loopcount++ > 2) { | |
56003191 | 616 | printk(KERN_DEBUG "Looping in ac_read. loopcount %d\n", loopcount); |
1da177e4 LT |
617 | } |
618 | #endif | |
619 | } | |
620 | } | |
621 | ||
7d12e780 | 622 | static irqreturn_t ac_interrupt(int vec, void *dev_instance) |
1da177e4 LT |
623 | { |
624 | unsigned int i; | |
625 | unsigned int FlagInt; | |
626 | unsigned int LoopCount; | |
627 | int handled = 0; | |
628 | ||
629 | // printk("Applicom interrupt on IRQ %d occurred\n", vec); | |
630 | ||
631 | LoopCount = 0; | |
632 | ||
633 | do { | |
634 | FlagInt = 0; | |
635 | for (i = 0; i < MAX_BOARD; i++) { | |
636 | ||
637 | /* Skip if this board doesn't exist */ | |
638 | if (!apbs[i].RamIO) | |
639 | continue; | |
640 | ||
641 | spin_lock(&apbs[i].mutex); | |
642 | ||
643 | /* Skip if this board doesn't want attention */ | |
644 | if(readb(apbs[i].RamIO + RAM_IT_TO_PC) == 0) { | |
645 | spin_unlock(&apbs[i].mutex); | |
646 | continue; | |
647 | } | |
648 | ||
649 | handled = 1; | |
650 | FlagInt = 1; | |
651 | writeb(0, apbs[i].RamIO + RAM_IT_TO_PC); | |
652 | ||
653 | if (readb(apbs[i].RamIO + DATA_TO_PC_READY) > 2) { | |
654 | printk(KERN_WARNING "APPLICOM driver interrupt err board %d, DataToPcReady = %d\n", | |
655 | i+1,(int)readb(apbs[i].RamIO + DATA_TO_PC_READY)); | |
656 | DeviceErrorCount++; | |
657 | } | |
658 | ||
659 | if((readb(apbs[i].RamIO + DATA_FROM_PC_READY) > 2) && | |
660 | (readb(apbs[i].RamIO + DATA_FROM_PC_READY) != 6)) { | |
661 | ||
662 | printk(KERN_WARNING "APPLICOM driver interrupt err board %d, DataFromPcReady = %d\n", | |
663 | i+1,(int)readb(apbs[i].RamIO + DATA_FROM_PC_READY)); | |
664 | DeviceErrorCount++; | |
665 | } | |
666 | ||
667 | if (readb(apbs[i].RamIO + DATA_TO_PC_READY) == 2) { /* mailbox sent by the card ? */ | |
668 | if (waitqueue_active(&FlagSleepRec)) { | |
669 | wake_up_interruptible(&FlagSleepRec); | |
670 | } | |
671 | } | |
672 | ||
673 | if (readb(apbs[i].RamIO + DATA_FROM_PC_READY) == 0) { /* ram i/o free for write by pc ? */ | |
674 | if (waitqueue_active(&apbs[i].FlagSleepSend)) { /* process sleep during read ? */ | |
675 | wake_up_interruptible(&apbs[i].FlagSleepSend); | |
676 | } | |
677 | } | |
678 | Dummy = readb(apbs[i].RamIO + VERS); | |
679 | ||
680 | if(readb(apbs[i].RamIO + RAM_IT_TO_PC)) { | |
681 | /* There's another int waiting on this card */ | |
682 | spin_unlock(&apbs[i].mutex); | |
683 | i--; | |
684 | } else { | |
685 | spin_unlock(&apbs[i].mutex); | |
686 | } | |
687 | } | |
688 | if (FlagInt) | |
689 | LoopCount = 0; | |
690 | else | |
691 | LoopCount++; | |
692 | } while(LoopCount < 2); | |
693 | return IRQ_RETVAL(handled); | |
694 | } | |
695 | ||
696 | ||
697 | ||
55929332 | 698 | static long ac_ioctl(struct file *file, unsigned int cmd, unsigned long arg) |
1da177e4 LT |
699 | |
700 | { /* @ ADG ou ATO selon le cas */ | |
701 | int i; | |
702 | unsigned char IndexCard; | |
703 | void __iomem *pmem; | |
704 | int ret = 0; | |
d7ac3c6e | 705 | static int warncount = 10; |
1da177e4 LT |
706 | volatile unsigned char byte_reset_it; |
707 | struct st_ram_io *adgl; | |
708 | void __user *argp = (void __user *)arg; | |
709 | ||
710 | /* In general, the device is only openable by root anyway, so we're not | |
711 | particularly concerned that bogus ioctls can flood the console. */ | |
712 | ||
f67231f8 JL |
713 | adgl = memdup_user(argp, sizeof(struct st_ram_io)); |
714 | if (IS_ERR(adgl)) | |
715 | return PTR_ERR(adgl); | |
55929332 | 716 | |
613655fa | 717 | mutex_lock(&ac_mutex); |
1da177e4 LT |
718 | IndexCard = adgl->num_card-1; |
719 | ||
d7ac3c6e GS |
720 | if (cmd != 6 && IndexCard >= MAX_BOARD) |
721 | goto err; | |
722 | IndexCard = array_index_nospec(IndexCard, MAX_BOARD); | |
723 | ||
724 | if (cmd != 6 && !apbs[IndexCard].RamIO) | |
725 | goto err; | |
1da177e4 LT |
726 | |
727 | switch (cmd) { | |
728 | ||
729 | case 0: | |
730 | pmem = apbs[IndexCard].RamIO; | |
731 | for (i = 0; i < sizeof(struct st_ram_io); i++) | |
732 | ((unsigned char *)adgl)[i]=readb(pmem++); | |
733 | if (copy_to_user(argp, adgl, sizeof(struct st_ram_io))) | |
734 | ret = -EFAULT; | |
735 | break; | |
736 | case 1: | |
737 | pmem = apbs[IndexCard].RamIO + CONF_END_TEST; | |
738 | for (i = 0; i < 4; i++) | |
739 | adgl->conf_end_test[i] = readb(pmem++); | |
740 | for (i = 0; i < 2; i++) | |
741 | adgl->error_code[i] = readb(pmem++); | |
742 | for (i = 0; i < 4; i++) | |
743 | adgl->parameter_error[i] = readb(pmem++); | |
744 | pmem = apbs[IndexCard].RamIO + VERS; | |
745 | adgl->vers = readb(pmem); | |
746 | pmem = apbs[IndexCard].RamIO + TYPE_CARD; | |
747 | for (i = 0; i < 20; i++) | |
748 | adgl->reserv1[i] = readb(pmem++); | |
749 | *(int *)&adgl->reserv1[20] = | |
750 | (readb(apbs[IndexCard].RamIO + SERIAL_NUMBER) << 16) + | |
751 | (readb(apbs[IndexCard].RamIO + SERIAL_NUMBER + 1) << 8) + | |
752 | (readb(apbs[IndexCard].RamIO + SERIAL_NUMBER + 2) ); | |
753 | ||
754 | if (copy_to_user(argp, adgl, sizeof(struct st_ram_io))) | |
755 | ret = -EFAULT; | |
756 | break; | |
757 | case 2: | |
758 | pmem = apbs[IndexCard].RamIO + CONF_END_TEST; | |
759 | for (i = 0; i < 10; i++) | |
760 | writeb(0xff, pmem++); | |
761 | writeb(adgl->data_from_pc_ready, | |
762 | apbs[IndexCard].RamIO + DATA_FROM_PC_READY); | |
763 | ||
764 | writeb(1, apbs[IndexCard].RamIO + RAM_IT_FROM_PC); | |
765 | ||
766 | for (i = 0; i < MAX_BOARD; i++) { | |
767 | if (apbs[i].RamIO) { | |
768 | byte_reset_it = readb(apbs[i].RamIO + RAM_IT_TO_PC); | |
769 | } | |
770 | } | |
771 | break; | |
772 | case 3: | |
773 | pmem = apbs[IndexCard].RamIO + TIC_DES_FROM_PC; | |
774 | writeb(adgl->tic_des_from_pc, pmem); | |
775 | break; | |
776 | case 4: | |
777 | pmem = apbs[IndexCard].RamIO + TIC_OWNER_TO_PC; | |
778 | adgl->tic_owner_to_pc = readb(pmem++); | |
779 | adgl->numcard_owner_to_pc = readb(pmem); | |
780 | if (copy_to_user(argp, adgl,sizeof(struct st_ram_io))) | |
781 | ret = -EFAULT; | |
782 | break; | |
783 | case 5: | |
784 | writeb(adgl->num_card, apbs[IndexCard].RamIO + NUMCARD_OWNER_TO_PC); | |
785 | writeb(adgl->num_card, apbs[IndexCard].RamIO + NUMCARD_DES_FROM_PC); | |
786 | writeb(adgl->num_card, apbs[IndexCard].RamIO + NUMCARD_ACK_FROM_PC); | |
787 | writeb(4, apbs[IndexCard].RamIO + DATA_FROM_PC_READY); | |
788 | writeb(1, apbs[IndexCard].RamIO + RAM_IT_FROM_PC); | |
789 | break; | |
790 | case 6: | |
791 | printk(KERN_INFO "APPLICOM driver release .... V2.8.0 ($Revision: 1.30 $)\n"); | |
792 | printk(KERN_INFO "Number of installed boards . %d\n", (int) numboards); | |
793 | printk(KERN_INFO "Segment of board ........... %X\n", (int) mem); | |
794 | printk(KERN_INFO "Interrupt IRQ number ....... %d\n", (int) irq); | |
795 | for (i = 0; i < MAX_BOARD; i++) { | |
796 | int serial; | |
797 | char boardname[(SERIAL_NUMBER - TYPE_CARD) + 1]; | |
798 | ||
799 | if (!apbs[i].RamIO) | |
800 | continue; | |
801 | ||
802 | for (serial = 0; serial < SERIAL_NUMBER - TYPE_CARD; serial++) | |
803 | boardname[serial] = readb(apbs[i].RamIO + TYPE_CARD + serial); | |
804 | boardname[serial] = 0; | |
805 | ||
806 | printk(KERN_INFO "Prom version board %d ....... V%d.%d %s", | |
807 | i+1, | |
2154e0a4 DC |
808 | (int)(readb(apbs[i].RamIO + VERS) >> 4), |
809 | (int)(readb(apbs[i].RamIO + VERS) & 0xF), | |
1da177e4 LT |
810 | boardname); |
811 | ||
812 | ||
813 | serial = (readb(apbs[i].RamIO + SERIAL_NUMBER) << 16) + | |
814 | (readb(apbs[i].RamIO + SERIAL_NUMBER + 1) << 8) + | |
815 | (readb(apbs[i].RamIO + SERIAL_NUMBER + 2) ); | |
816 | ||
817 | if (serial != 0) | |
818 | printk(" S/N %d\n", serial); | |
819 | else | |
820 | printk("\n"); | |
821 | } | |
822 | if (DeviceErrorCount != 0) | |
823 | printk(KERN_INFO "DeviceErrorCount ........... %d\n", DeviceErrorCount); | |
824 | if (ReadErrorCount != 0) | |
825 | printk(KERN_INFO "ReadErrorCount ............. %d\n", ReadErrorCount); | |
826 | if (WriteErrorCount != 0) | |
827 | printk(KERN_INFO "WriteErrorCount ............ %d\n", WriteErrorCount); | |
828 | if (waitqueue_active(&FlagSleepRec)) | |
829 | printk(KERN_INFO "Process in read pending\n"); | |
830 | for (i = 0; i < MAX_BOARD; i++) { | |
831 | if (apbs[i].RamIO && waitqueue_active(&apbs[i].FlagSleepSend)) | |
832 | printk(KERN_INFO "Process in write pending board %d\n",i+1); | |
833 | } | |
834 | break; | |
835 | default: | |
a7be18d4 | 836 | ret = -ENOTTY; |
1da177e4 LT |
837 | break; |
838 | } | |
839 | Dummy = readb(apbs[IndexCard].RamIO + VERS); | |
840 | kfree(adgl); | |
613655fa | 841 | mutex_unlock(&ac_mutex); |
1da177e4 | 842 | return 0; |
d7ac3c6e GS |
843 | |
844 | err: | |
845 | if (warncount) { | |
846 | pr_warn("APPLICOM driver IOCTL, bad board number %d\n", | |
847 | (int)IndexCard + 1); | |
848 | warncount--; | |
849 | } | |
850 | kfree(adgl); | |
851 | mutex_unlock(&ac_mutex); | |
852 | return -EINVAL; | |
853 | ||
1da177e4 LT |
854 | } |
855 |