]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * Generic parallel printer driver | |
3 | * | |
4 | * Copyright (C) 1992 by Jim Weigand and Linus Torvalds | |
5 | * Copyright (C) 1992,1993 by Michael K. Johnson | |
6 | * - Thanks much to Gunter Windau for pointing out to me where the error | |
7 | * checking ought to be. | |
8 | * Copyright (C) 1993 by Nigel Gamble (added interrupt code) | |
9 | * Copyright (C) 1994 by Alan Cox (Modularised it) | |
10 | * LPCAREFUL, LPABORT, LPGETSTATUS added by Chris Metcalf, metcalf@lcs.mit.edu | |
11 | * Statistics and support for slow printers by Rob Janssen, rob@knoware.nl | |
12 | * "lp=" command line parameters added by Grant Guenther, grant@torque.net | |
13 | * lp_read (Status readback) support added by Carsten Gross, | |
14 | * carsten@sol.wohnheim.uni-ulm.de | |
15 | * Support for parport by Philip Blundell <philb@gnu.org> | |
16 | * Parport sharing hacking by Andrea Arcangeli | |
17 | * Fixed kernel_(to/from)_user memory copy to check for errors | |
18 | * by Riccardo Facchetti <fizban@tin.it> | |
19 | * 22-JAN-1998 Added support for devfs Richard Gooch <rgooch@atnf.csiro.au> | |
20 | * Redesigned interrupt handling for handle printers with buggy handshake | |
21 | * by Andrea Arcangeli, 11 May 1998 | |
22 | * Full efficient handling of printer with buggy irq handshake (now I have | |
23 | * understood the meaning of the strange handshake). This is done sending new | |
24 | * characters if the interrupt is just happened, even if the printer say to | |
25 | * be still BUSY. This is needed at least with Epson Stylus Color. To enable | |
26 | * the new TRUST_IRQ mode read the `LP OPTIMIZATION' section below... | |
27 | * Fixed the irq on the rising edge of the strobe case. | |
28 | * Obsoleted the CAREFUL flag since a printer that doesn' t work with | |
29 | * CAREFUL will block a bit after in lp_check_status(). | |
30 | * Andrea Arcangeli, 15 Oct 1998 | |
31 | * Obsoleted and removed all the lowlevel stuff implemented in the last | |
32 | * month to use the IEEE1284 functions (that handle the _new_ compatibilty | |
33 | * mode fine). | |
34 | */ | |
35 | ||
36 | /* This driver should, in theory, work with any parallel port that has an | |
37 | * appropriate low-level driver; all I/O is done through the parport | |
38 | * abstraction layer. | |
39 | * | |
40 | * If this driver is built into the kernel, you can configure it using the | |
41 | * kernel command-line. For example: | |
42 | * | |
43 | * lp=parport1,none,parport2 (bind lp0 to parport1, disable lp1 and | |
44 | * bind lp2 to parport2) | |
45 | * | |
46 | * lp=auto (assign lp devices to all ports that | |
47 | * have printers attached, as determined | |
48 | * by the IEEE-1284 autoprobe) | |
49 | * | |
50 | * lp=reset (reset the printer during | |
51 | * initialisation) | |
52 | * | |
53 | * lp=off (disable the printer driver entirely) | |
54 | * | |
55 | * If the driver is loaded as a module, similar functionality is available | |
56 | * using module parameters. The equivalent of the above commands would be: | |
57 | * | |
58 | * # insmod lp.o parport=1,none,2 | |
59 | * | |
60 | * # insmod lp.o parport=auto | |
61 | * | |
62 | * # insmod lp.o reset=1 | |
63 | */ | |
64 | ||
65 | /* COMPATIBILITY WITH OLD KERNELS | |
66 | * | |
67 | * Under Linux 2.0 and previous versions, lp devices were bound to ports at | |
68 | * particular I/O addresses, as follows: | |
69 | * | |
70 | * lp0 0x3bc | |
71 | * lp1 0x378 | |
72 | * lp2 0x278 | |
73 | * | |
74 | * The new driver, by default, binds lp devices to parport devices as it | |
75 | * finds them. This means that if you only have one port, it will be bound | |
76 | * to lp0 regardless of its I/O address. If you need the old behaviour, you | |
77 | * can force it using the parameters described above. | |
78 | */ | |
79 | ||
80 | /* | |
81 | * The new interrupt handling code take care of the buggy handshake | |
82 | * of some HP and Epson printer: | |
83 | * ___ | |
84 | * ACK _______________ ___________ | |
85 | * |__| | |
86 | * ____ | |
87 | * BUSY _________ _______ | |
88 | * |____________| | |
89 | * | |
90 | * I discovered this using the printer scanner that you can find at: | |
91 | * | |
92 | * ftp://e-mind.com/pub/linux/pscan/ | |
93 | * | |
94 | * 11 May 98, Andrea Arcangeli | |
95 | * | |
96 | * My printer scanner run on an Epson Stylus Color show that such printer | |
97 | * generates the irq on the _rising_ edge of the STROBE. Now lp handle | |
98 | * this case fine too. | |
99 | * | |
100 | * 15 Oct 1998, Andrea Arcangeli | |
101 | * | |
102 | * The so called `buggy' handshake is really the well documented | |
103 | * compatibility mode IEEE1284 handshake. They changed the well known | |
104 | * Centronics handshake acking in the middle of busy expecting to not | |
105 | * break drivers or legacy application, while they broken linux lp | |
106 | * until I fixed it reverse engineering the protocol by hand some | |
107 | * month ago... | |
108 | * | |
109 | * 14 Dec 1998, Andrea Arcangeli | |
110 | * | |
111 | * Copyright (C) 2000 by Tim Waugh (added LPSETTIMEOUT ioctl) | |
112 | */ | |
113 | ||
114 | #include <linux/module.h> | |
115 | #include <linux/init.h> | |
116 | ||
1da177e4 LT |
117 | #include <linux/errno.h> |
118 | #include <linux/kernel.h> | |
119 | #include <linux/major.h> | |
120 | #include <linux/sched.h> | |
1da177e4 LT |
121 | #include <linux/slab.h> |
122 | #include <linux/fcntl.h> | |
123 | #include <linux/delay.h> | |
124 | #include <linux/poll.h> | |
125 | #include <linux/console.h> | |
126 | #include <linux/device.h> | |
127 | #include <linux/wait.h> | |
96757701 | 128 | #include <linux/jiffies.h> |
613655fa | 129 | #include <linux/mutex.h> |
3695669c | 130 | #include <linux/compat.h> |
1da177e4 LT |
131 | |
132 | #include <linux/parport.h> | |
133 | #undef LP_STATS | |
134 | #include <linux/lp.h> | |
135 | ||
136 | #include <asm/irq.h> | |
137 | #include <asm/uaccess.h> | |
138 | #include <asm/system.h> | |
139 | ||
140 | /* if you have more than 8 printers, remember to increase LP_NO */ | |
141 | #define LP_NO 8 | |
142 | ||
613655fa | 143 | static DEFINE_MUTEX(lp_mutex); |
1da177e4 LT |
144 | static struct lp_struct lp_table[LP_NO]; |
145 | ||
146 | static unsigned int lp_count = 0; | |
ca8eca68 | 147 | static struct class *lp_class; |
1da177e4 LT |
148 | |
149 | #ifdef CONFIG_LP_CONSOLE | |
f4a1c2bc | 150 | static struct parport *console_registered; |
1da177e4 LT |
151 | #endif /* CONFIG_LP_CONSOLE */ |
152 | ||
153 | #undef LP_DEBUG | |
154 | ||
155 | /* Bits used to manage claiming the parport device */ | |
156 | #define LP_PREEMPT_REQUEST 1 | |
157 | #define LP_PARPORT_CLAIMED 2 | |
158 | ||
159 | /* --- low-level port access ----------------------------------- */ | |
160 | ||
161 | #define r_dtr(x) (parport_read_data(lp_table[(x)].dev->port)) | |
162 | #define r_str(x) (parport_read_status(lp_table[(x)].dev->port)) | |
163 | #define w_ctr(x,y) do { parport_write_control(lp_table[(x)].dev->port, (y)); } while (0) | |
164 | #define w_dtr(x,y) do { parport_write_data(lp_table[(x)].dev->port, (y)); } while (0) | |
165 | ||
166 | /* Claim the parport or block trying unless we've already claimed it */ | |
167 | static void lp_claim_parport_or_block(struct lp_struct *this_lp) | |
168 | { | |
169 | if (!test_and_set_bit(LP_PARPORT_CLAIMED, &this_lp->bits)) { | |
170 | parport_claim_or_block (this_lp->dev); | |
171 | } | |
172 | } | |
173 | ||
174 | /* Claim the parport or block trying unless we've already claimed it */ | |
175 | static void lp_release_parport(struct lp_struct *this_lp) | |
176 | { | |
177 | if (test_and_clear_bit(LP_PARPORT_CLAIMED, &this_lp->bits)) { | |
178 | parport_release (this_lp->dev); | |
179 | } | |
180 | } | |
181 | ||
182 | ||
183 | ||
184 | static int lp_preempt(void *handle) | |
185 | { | |
186 | struct lp_struct *this_lp = (struct lp_struct *)handle; | |
187 | set_bit(LP_PREEMPT_REQUEST, &this_lp->bits); | |
188 | return (1); | |
189 | } | |
190 | ||
191 | ||
192 | /* | |
193 | * Try to negotiate to a new mode; if unsuccessful negotiate to | |
194 | * compatibility mode. Return the mode we ended up in. | |
195 | */ | |
196 | static int lp_negotiate(struct parport * port, int mode) | |
197 | { | |
198 | if (parport_negotiate (port, mode) != 0) { | |
199 | mode = IEEE1284_MODE_COMPAT; | |
200 | parport_negotiate (port, mode); | |
201 | } | |
202 | ||
203 | return (mode); | |
204 | } | |
205 | ||
206 | static int lp_reset(int minor) | |
207 | { | |
208 | int retval; | |
209 | lp_claim_parport_or_block (&lp_table[minor]); | |
210 | w_ctr(minor, LP_PSELECP); | |
211 | udelay (LP_DELAY); | |
212 | w_ctr(minor, LP_PSELECP | LP_PINITP); | |
213 | retval = r_str(minor); | |
214 | lp_release_parport (&lp_table[minor]); | |
215 | return retval; | |
216 | } | |
217 | ||
218 | static void lp_error (int minor) | |
219 | { | |
220 | DEFINE_WAIT(wait); | |
221 | int polling; | |
222 | ||
223 | if (LP_F(minor) & LP_ABORT) | |
224 | return; | |
225 | ||
226 | polling = lp_table[minor].dev->port->irq == PARPORT_IRQ_NONE; | |
227 | if (polling) lp_release_parport (&lp_table[minor]); | |
228 | prepare_to_wait(&lp_table[minor].waitq, &wait, TASK_INTERRUPTIBLE); | |
229 | schedule_timeout(LP_TIMEOUT_POLLED); | |
230 | finish_wait(&lp_table[minor].waitq, &wait); | |
231 | if (polling) lp_claim_parport_or_block (&lp_table[minor]); | |
232 | else parport_yield_blocking (lp_table[minor].dev); | |
233 | } | |
234 | ||
235 | static int lp_check_status(int minor) | |
236 | { | |
237 | int error = 0; | |
238 | unsigned int last = lp_table[minor].last_error; | |
239 | unsigned char status = r_str(minor); | |
240 | if ((status & LP_PERRORP) && !(LP_F(minor) & LP_CAREFUL)) | |
241 | /* No error. */ | |
242 | last = 0; | |
243 | else if ((status & LP_POUTPA)) { | |
244 | if (last != LP_POUTPA) { | |
245 | last = LP_POUTPA; | |
246 | printk(KERN_INFO "lp%d out of paper\n", minor); | |
247 | } | |
248 | error = -ENOSPC; | |
249 | } else if (!(status & LP_PSELECD)) { | |
250 | if (last != LP_PSELECD) { | |
251 | last = LP_PSELECD; | |
252 | printk(KERN_INFO "lp%d off-line\n", minor); | |
253 | } | |
254 | error = -EIO; | |
255 | } else if (!(status & LP_PERRORP)) { | |
256 | if (last != LP_PERRORP) { | |
257 | last = LP_PERRORP; | |
258 | printk(KERN_INFO "lp%d on fire\n", minor); | |
259 | } | |
260 | error = -EIO; | |
261 | } else { | |
262 | last = 0; /* Come here if LP_CAREFUL is set and no | |
263 | errors are reported. */ | |
264 | } | |
265 | ||
266 | lp_table[minor].last_error = last; | |
267 | ||
268 | if (last != 0) | |
269 | lp_error(minor); | |
270 | ||
271 | return error; | |
272 | } | |
273 | ||
274 | static int lp_wait_ready(int minor, int nonblock) | |
275 | { | |
276 | int error = 0; | |
277 | ||
278 | /* If we're not in compatibility mode, we're ready now! */ | |
279 | if (lp_table[minor].current_mode != IEEE1284_MODE_COMPAT) { | |
280 | return (0); | |
281 | } | |
282 | ||
283 | do { | |
284 | error = lp_check_status (minor); | |
285 | if (error && (nonblock || (LP_F(minor) & LP_ABORT))) | |
286 | break; | |
287 | if (signal_pending (current)) { | |
288 | error = -EINTR; | |
289 | break; | |
290 | } | |
291 | } while (error); | |
292 | return error; | |
293 | } | |
294 | ||
295 | static ssize_t lp_write(struct file * file, const char __user * buf, | |
296 | size_t count, loff_t *ppos) | |
297 | { | |
a7113a96 | 298 | unsigned int minor = iminor(file->f_path.dentry->d_inode); |
1da177e4 LT |
299 | struct parport *port = lp_table[minor].dev->port; |
300 | char *kbuf = lp_table[minor].lp_buffer; | |
301 | ssize_t retv = 0; | |
302 | ssize_t written; | |
303 | size_t copy_size = count; | |
304 | int nonblock = ((file->f_flags & O_NONBLOCK) || | |
305 | (LP_F(minor) & LP_ABORT)); | |
306 | ||
307 | #ifdef LP_STATS | |
96757701 | 308 | if (time_after(jiffies, lp_table[minor].lastcall + LP_TIME(minor))) |
1da177e4 LT |
309 | lp_table[minor].runchars = 0; |
310 | ||
311 | lp_table[minor].lastcall = jiffies; | |
312 | #endif | |
313 | ||
314 | /* Need to copy the data from user-space. */ | |
315 | if (copy_size > LP_BUFFER_SIZE) | |
316 | copy_size = LP_BUFFER_SIZE; | |
317 | ||
0a5dcb51 | 318 | if (mutex_lock_interruptible(&lp_table[minor].port_mutex)) |
1da177e4 LT |
319 | return -EINTR; |
320 | ||
321 | if (copy_from_user (kbuf, buf, copy_size)) { | |
322 | retv = -EFAULT; | |
323 | goto out_unlock; | |
324 | } | |
325 | ||
326 | /* Claim Parport or sleep until it becomes available | |
327 | */ | |
328 | lp_claim_parport_or_block (&lp_table[minor]); | |
329 | /* Go to the proper mode. */ | |
330 | lp_table[minor].current_mode = lp_negotiate (port, | |
331 | lp_table[minor].best_mode); | |
332 | ||
333 | parport_set_timeout (lp_table[minor].dev, | |
334 | (nonblock ? PARPORT_INACTIVITY_O_NONBLOCK | |
335 | : lp_table[minor].timeout)); | |
336 | ||
337 | if ((retv = lp_wait_ready (minor, nonblock)) == 0) | |
338 | do { | |
339 | /* Write the data. */ | |
340 | written = parport_write (port, kbuf, copy_size); | |
341 | if (written > 0) { | |
342 | copy_size -= written; | |
343 | count -= written; | |
344 | buf += written; | |
345 | retv += written; | |
346 | } | |
347 | ||
348 | if (signal_pending (current)) { | |
349 | if (retv == 0) | |
350 | retv = -EINTR; | |
351 | ||
352 | break; | |
353 | } | |
354 | ||
355 | if (copy_size > 0) { | |
356 | /* incomplete write -> check error ! */ | |
357 | int error; | |
358 | ||
359 | parport_negotiate (lp_table[minor].dev->port, | |
360 | IEEE1284_MODE_COMPAT); | |
361 | lp_table[minor].current_mode = IEEE1284_MODE_COMPAT; | |
362 | ||
363 | error = lp_wait_ready (minor, nonblock); | |
364 | ||
365 | if (error) { | |
366 | if (retv == 0) | |
367 | retv = error; | |
368 | break; | |
369 | } else if (nonblock) { | |
370 | if (retv == 0) | |
371 | retv = -EAGAIN; | |
372 | break; | |
373 | } | |
374 | ||
375 | parport_yield_blocking (lp_table[minor].dev); | |
376 | lp_table[minor].current_mode | |
377 | = lp_negotiate (port, | |
378 | lp_table[minor].best_mode); | |
379 | ||
380 | } else if (need_resched()) | |
381 | schedule (); | |
382 | ||
383 | if (count) { | |
384 | copy_size = count; | |
385 | if (copy_size > LP_BUFFER_SIZE) | |
386 | copy_size = LP_BUFFER_SIZE; | |
387 | ||
388 | if (copy_from_user(kbuf, buf, copy_size)) { | |
389 | if (retv == 0) | |
390 | retv = -EFAULT; | |
391 | break; | |
392 | } | |
393 | } | |
394 | } while (count > 0); | |
395 | ||
396 | if (test_and_clear_bit(LP_PREEMPT_REQUEST, | |
397 | &lp_table[minor].bits)) { | |
398 | printk(KERN_INFO "lp%d releasing parport\n", minor); | |
399 | parport_negotiate (lp_table[minor].dev->port, | |
400 | IEEE1284_MODE_COMPAT); | |
401 | lp_table[minor].current_mode = IEEE1284_MODE_COMPAT; | |
402 | lp_release_parport (&lp_table[minor]); | |
403 | } | |
404 | out_unlock: | |
0a5dcb51 | 405 | mutex_unlock(&lp_table[minor].port_mutex); |
1da177e4 LT |
406 | |
407 | return retv; | |
408 | } | |
409 | ||
410 | #ifdef CONFIG_PARPORT_1284 | |
411 | ||
412 | /* Status readback conforming to ieee1284 */ | |
413 | static ssize_t lp_read(struct file * file, char __user * buf, | |
414 | size_t count, loff_t *ppos) | |
415 | { | |
416 | DEFINE_WAIT(wait); | |
a7113a96 | 417 | unsigned int minor=iminor(file->f_path.dentry->d_inode); |
1da177e4 LT |
418 | struct parport *port = lp_table[minor].dev->port; |
419 | ssize_t retval = 0; | |
420 | char *kbuf = lp_table[minor].lp_buffer; | |
421 | int nonblock = ((file->f_flags & O_NONBLOCK) || | |
422 | (LP_F(minor) & LP_ABORT)); | |
423 | ||
424 | if (count > LP_BUFFER_SIZE) | |
425 | count = LP_BUFFER_SIZE; | |
426 | ||
0a5dcb51 | 427 | if (mutex_lock_interruptible(&lp_table[minor].port_mutex)) |
1da177e4 LT |
428 | return -EINTR; |
429 | ||
430 | lp_claim_parport_or_block (&lp_table[minor]); | |
431 | ||
432 | parport_set_timeout (lp_table[minor].dev, | |
433 | (nonblock ? PARPORT_INACTIVITY_O_NONBLOCK | |
434 | : lp_table[minor].timeout)); | |
435 | ||
436 | parport_negotiate (lp_table[minor].dev->port, IEEE1284_MODE_COMPAT); | |
437 | if (parport_negotiate (lp_table[minor].dev->port, | |
438 | IEEE1284_MODE_NIBBLE)) { | |
439 | retval = -EIO; | |
440 | goto out; | |
441 | } | |
442 | ||
443 | while (retval == 0) { | |
444 | retval = parport_read (port, kbuf, count); | |
445 | ||
446 | if (retval > 0) | |
447 | break; | |
448 | ||
449 | if (nonblock) { | |
450 | retval = -EAGAIN; | |
451 | break; | |
452 | } | |
453 | ||
454 | /* Wait for data. */ | |
455 | ||
456 | if (lp_table[minor].dev->port->irq == PARPORT_IRQ_NONE) { | |
457 | parport_negotiate (lp_table[minor].dev->port, | |
458 | IEEE1284_MODE_COMPAT); | |
459 | lp_error (minor); | |
460 | if (parport_negotiate (lp_table[minor].dev->port, | |
461 | IEEE1284_MODE_NIBBLE)) { | |
462 | retval = -EIO; | |
463 | goto out; | |
464 | } | |
465 | } else { | |
466 | prepare_to_wait(&lp_table[minor].waitq, &wait, TASK_INTERRUPTIBLE); | |
467 | schedule_timeout(LP_TIMEOUT_POLLED); | |
468 | finish_wait(&lp_table[minor].waitq, &wait); | |
469 | } | |
470 | ||
471 | if (signal_pending (current)) { | |
472 | retval = -ERESTARTSYS; | |
473 | break; | |
474 | } | |
475 | ||
476 | cond_resched (); | |
477 | } | |
478 | parport_negotiate (lp_table[minor].dev->port, IEEE1284_MODE_COMPAT); | |
479 | out: | |
480 | lp_release_parport (&lp_table[minor]); | |
481 | ||
482 | if (retval > 0 && copy_to_user (buf, kbuf, retval)) | |
483 | retval = -EFAULT; | |
484 | ||
0a5dcb51 | 485 | mutex_unlock(&lp_table[minor].port_mutex); |
1da177e4 LT |
486 | |
487 | return retval; | |
488 | } | |
489 | ||
490 | #endif /* IEEE 1284 support */ | |
491 | ||
492 | static int lp_open(struct inode * inode, struct file * file) | |
493 | { | |
494 | unsigned int minor = iminor(inode); | |
abedd296 | 495 | int ret = 0; |
1da177e4 | 496 | |
613655fa | 497 | mutex_lock(&lp_mutex); |
abedd296 JC |
498 | if (minor >= LP_NO) { |
499 | ret = -ENXIO; | |
500 | goto out; | |
501 | } | |
502 | if ((LP_F(minor) & LP_EXIST) == 0) { | |
503 | ret = -ENXIO; | |
504 | goto out; | |
505 | } | |
506 | if (test_and_set_bit(LP_BUSY_BIT_POS, &LP_F(minor))) { | |
507 | ret = -EBUSY; | |
508 | goto out; | |
509 | } | |
1da177e4 LT |
510 | /* If ABORTOPEN is set and the printer is offline or out of paper, |
511 | we may still want to open it to perform ioctl()s. Therefore we | |
512 | have commandeered O_NONBLOCK, even though it is being used in | |
513 | a non-standard manner. This is strictly a Linux hack, and | |
514 | should most likely only ever be used by the tunelp application. */ | |
515 | if ((LP_F(minor) & LP_ABORTOPEN) && !(file->f_flags & O_NONBLOCK)) { | |
516 | int status; | |
517 | lp_claim_parport_or_block (&lp_table[minor]); | |
518 | status = r_str(minor); | |
519 | lp_release_parport (&lp_table[minor]); | |
520 | if (status & LP_POUTPA) { | |
521 | printk(KERN_INFO "lp%d out of paper\n", minor); | |
522 | LP_F(minor) &= ~LP_BUSY; | |
abedd296 JC |
523 | ret = -ENOSPC; |
524 | goto out; | |
1da177e4 LT |
525 | } else if (!(status & LP_PSELECD)) { |
526 | printk(KERN_INFO "lp%d off-line\n", minor); | |
527 | LP_F(minor) &= ~LP_BUSY; | |
abedd296 JC |
528 | ret = -EIO; |
529 | goto out; | |
1da177e4 LT |
530 | } else if (!(status & LP_PERRORP)) { |
531 | printk(KERN_ERR "lp%d printer error\n", minor); | |
532 | LP_F(minor) &= ~LP_BUSY; | |
abedd296 JC |
533 | ret = -EIO; |
534 | goto out; | |
1da177e4 LT |
535 | } |
536 | } | |
5cbded58 | 537 | lp_table[minor].lp_buffer = kmalloc(LP_BUFFER_SIZE, GFP_KERNEL); |
1da177e4 LT |
538 | if (!lp_table[minor].lp_buffer) { |
539 | LP_F(minor) &= ~LP_BUSY; | |
abedd296 JC |
540 | ret = -ENOMEM; |
541 | goto out; | |
1da177e4 LT |
542 | } |
543 | /* Determine if the peripheral supports ECP mode */ | |
544 | lp_claim_parport_or_block (&lp_table[minor]); | |
545 | if ( (lp_table[minor].dev->port->modes & PARPORT_MODE_ECP) && | |
546 | !parport_negotiate (lp_table[minor].dev->port, | |
547 | IEEE1284_MODE_ECP)) { | |
548 | printk (KERN_INFO "lp%d: ECP mode\n", minor); | |
549 | lp_table[minor].best_mode = IEEE1284_MODE_ECP; | |
550 | } else { | |
551 | lp_table[minor].best_mode = IEEE1284_MODE_COMPAT; | |
552 | } | |
553 | /* Leave peripheral in compatibility mode */ | |
554 | parport_negotiate (lp_table[minor].dev->port, IEEE1284_MODE_COMPAT); | |
555 | lp_release_parport (&lp_table[minor]); | |
556 | lp_table[minor].current_mode = IEEE1284_MODE_COMPAT; | |
abedd296 | 557 | out: |
613655fa | 558 | mutex_unlock(&lp_mutex); |
abedd296 | 559 | return ret; |
1da177e4 LT |
560 | } |
561 | ||
562 | static int lp_release(struct inode * inode, struct file * file) | |
563 | { | |
564 | unsigned int minor = iminor(inode); | |
565 | ||
566 | lp_claim_parport_or_block (&lp_table[minor]); | |
567 | parport_negotiate (lp_table[minor].dev->port, IEEE1284_MODE_COMPAT); | |
568 | lp_table[minor].current_mode = IEEE1284_MODE_COMPAT; | |
569 | lp_release_parport (&lp_table[minor]); | |
570 | kfree(lp_table[minor].lp_buffer); | |
571 | lp_table[minor].lp_buffer = NULL; | |
572 | LP_F(minor) &= ~LP_BUSY; | |
573 | return 0; | |
574 | } | |
575 | ||
3695669c AB |
576 | static int lp_do_ioctl(unsigned int minor, unsigned int cmd, |
577 | unsigned long arg, void __user *argp) | |
1da177e4 | 578 | { |
1da177e4 LT |
579 | int status; |
580 | int retval = 0; | |
1da177e4 LT |
581 | |
582 | #ifdef LP_DEBUG | |
583 | printk(KERN_DEBUG "lp%d ioctl, cmd: 0x%x, arg: 0x%lx\n", minor, cmd, arg); | |
584 | #endif | |
585 | if (minor >= LP_NO) | |
586 | return -ENODEV; | |
587 | if ((LP_F(minor) & LP_EXIST) == 0) | |
588 | return -ENODEV; | |
589 | switch ( cmd ) { | |
1da177e4 LT |
590 | case LPTIME: |
591 | LP_TIME(minor) = arg * HZ/100; | |
592 | break; | |
593 | case LPCHAR: | |
594 | LP_CHAR(minor) = arg; | |
595 | break; | |
596 | case LPABORT: | |
597 | if (arg) | |
598 | LP_F(minor) |= LP_ABORT; | |
599 | else | |
600 | LP_F(minor) &= ~LP_ABORT; | |
601 | break; | |
602 | case LPABORTOPEN: | |
603 | if (arg) | |
604 | LP_F(minor) |= LP_ABORTOPEN; | |
605 | else | |
606 | LP_F(minor) &= ~LP_ABORTOPEN; | |
607 | break; | |
608 | case LPCAREFUL: | |
609 | if (arg) | |
610 | LP_F(minor) |= LP_CAREFUL; | |
611 | else | |
612 | LP_F(minor) &= ~LP_CAREFUL; | |
613 | break; | |
614 | case LPWAIT: | |
615 | LP_WAIT(minor) = arg; | |
616 | break; | |
617 | case LPSETIRQ: | |
618 | return -EINVAL; | |
619 | break; | |
620 | case LPGETIRQ: | |
621 | if (copy_to_user(argp, &LP_IRQ(minor), | |
622 | sizeof(int))) | |
623 | return -EFAULT; | |
624 | break; | |
625 | case LPGETSTATUS: | |
626 | lp_claim_parport_or_block (&lp_table[minor]); | |
627 | status = r_str(minor); | |
628 | lp_release_parport (&lp_table[minor]); | |
629 | ||
630 | if (copy_to_user(argp, &status, sizeof(int))) | |
631 | return -EFAULT; | |
632 | break; | |
633 | case LPRESET: | |
634 | lp_reset(minor); | |
635 | break; | |
636 | #ifdef LP_STATS | |
637 | case LPGETSTATS: | |
638 | if (copy_to_user(argp, &LP_STAT(minor), | |
639 | sizeof(struct lp_stats))) | |
640 | return -EFAULT; | |
641 | if (capable(CAP_SYS_ADMIN)) | |
642 | memset(&LP_STAT(minor), 0, | |
643 | sizeof(struct lp_stats)); | |
644 | break; | |
645 | #endif | |
646 | case LPGETFLAGS: | |
647 | status = LP_F(minor); | |
648 | if (copy_to_user(argp, &status, sizeof(int))) | |
649 | return -EFAULT; | |
650 | break; | |
651 | ||
1da177e4 LT |
652 | default: |
653 | retval = -EINVAL; | |
654 | } | |
655 | return retval; | |
656 | } | |
657 | ||
3695669c AB |
658 | static int lp_set_timeout(unsigned int minor, struct timeval *par_timeout) |
659 | { | |
660 | long to_jiffies; | |
661 | ||
662 | /* Convert to jiffies, place in lp_table */ | |
663 | if ((par_timeout->tv_sec < 0) || | |
664 | (par_timeout->tv_usec < 0)) { | |
665 | return -EINVAL; | |
666 | } | |
667 | to_jiffies = DIV_ROUND_UP(par_timeout->tv_usec, 1000000/HZ); | |
668 | to_jiffies += par_timeout->tv_sec * (long) HZ; | |
669 | if (to_jiffies <= 0) { | |
670 | return -EINVAL; | |
671 | } | |
672 | lp_table[minor].timeout = to_jiffies; | |
673 | return 0; | |
674 | } | |
675 | ||
676 | static long lp_ioctl(struct file *file, unsigned int cmd, | |
677 | unsigned long arg) | |
678 | { | |
679 | unsigned int minor; | |
680 | struct timeval par_timeout; | |
681 | int ret; | |
682 | ||
683 | minor = iminor(file->f_path.dentry->d_inode); | |
613655fa | 684 | mutex_lock(&lp_mutex); |
3695669c AB |
685 | switch (cmd) { |
686 | case LPSETTIMEOUT: | |
687 | if (copy_from_user(&par_timeout, (void __user *)arg, | |
688 | sizeof (struct timeval))) { | |
689 | ret = -EFAULT; | |
690 | break; | |
691 | } | |
692 | ret = lp_set_timeout(minor, &par_timeout); | |
693 | break; | |
694 | default: | |
695 | ret = lp_do_ioctl(minor, cmd, arg, (void __user *)arg); | |
696 | break; | |
697 | } | |
613655fa | 698 | mutex_unlock(&lp_mutex); |
3695669c AB |
699 | |
700 | return ret; | |
701 | } | |
702 | ||
703 | #ifdef CONFIG_COMPAT | |
704 | static long lp_compat_ioctl(struct file *file, unsigned int cmd, | |
705 | unsigned long arg) | |
706 | { | |
707 | unsigned int minor; | |
708 | struct timeval par_timeout; | |
709 | struct compat_timeval __user *tc; | |
710 | int ret; | |
711 | ||
712 | minor = iminor(file->f_path.dentry->d_inode); | |
613655fa | 713 | mutex_lock(&lp_mutex); |
3695669c AB |
714 | switch (cmd) { |
715 | case LPSETTIMEOUT: | |
716 | tc = compat_ptr(arg); | |
717 | if (get_user(par_timeout.tv_sec, &tc->tv_sec) || | |
718 | get_user(par_timeout.tv_usec, &tc->tv_usec)) { | |
719 | ret = -EFAULT; | |
720 | break; | |
721 | } | |
722 | ret = lp_set_timeout(minor, &par_timeout); | |
723 | break; | |
724 | #ifdef LP_STATS | |
725 | case LPGETSTATS: | |
726 | /* FIXME: add an implementation if you set LP_STATS */ | |
727 | ret = -EINVAL; | |
728 | break; | |
729 | #endif | |
730 | default: | |
731 | ret = lp_do_ioctl(minor, cmd, arg, compat_ptr(arg)); | |
732 | break; | |
733 | } | |
613655fa | 734 | mutex_unlock(&lp_mutex); |
3695669c AB |
735 | |
736 | return ret; | |
737 | } | |
738 | #endif | |
739 | ||
62322d25 | 740 | static const struct file_operations lp_fops = { |
1da177e4 LT |
741 | .owner = THIS_MODULE, |
742 | .write = lp_write, | |
3695669c AB |
743 | .unlocked_ioctl = lp_ioctl, |
744 | #ifdef CONFIG_COMPAT | |
745 | .compat_ioctl = lp_compat_ioctl, | |
746 | #endif | |
1da177e4 LT |
747 | .open = lp_open, |
748 | .release = lp_release, | |
749 | #ifdef CONFIG_PARPORT_1284 | |
750 | .read = lp_read, | |
751 | #endif | |
6038f373 | 752 | .llseek = noop_llseek, |
1da177e4 LT |
753 | }; |
754 | ||
755 | /* --- support for console on the line printer ----------------- */ | |
756 | ||
757 | #ifdef CONFIG_LP_CONSOLE | |
758 | ||
759 | #define CONSOLE_LP 0 | |
760 | ||
761 | /* If the printer is out of paper, we can either lose the messages or | |
762 | * stall until the printer is happy again. Define CONSOLE_LP_STRICT | |
763 | * non-zero to get the latter behaviour. */ | |
764 | #define CONSOLE_LP_STRICT 1 | |
765 | ||
766 | /* The console must be locked when we get here. */ | |
767 | ||
768 | static void lp_console_write (struct console *co, const char *s, | |
769 | unsigned count) | |
770 | { | |
771 | struct pardevice *dev = lp_table[CONSOLE_LP].dev; | |
772 | struct parport *port = dev->port; | |
773 | ssize_t written; | |
774 | ||
775 | if (parport_claim (dev)) | |
776 | /* Nothing we can do. */ | |
777 | return; | |
778 | ||
779 | parport_set_timeout (dev, 0); | |
780 | ||
781 | /* Go to compatibility mode. */ | |
782 | parport_negotiate (port, IEEE1284_MODE_COMPAT); | |
783 | ||
784 | do { | |
785 | /* Write the data, converting LF->CRLF as we go. */ | |
786 | ssize_t canwrite = count; | |
787 | char *lf = memchr (s, '\n', count); | |
788 | if (lf) | |
789 | canwrite = lf - s; | |
790 | ||
791 | if (canwrite > 0) { | |
792 | written = parport_write (port, s, canwrite); | |
793 | ||
794 | if (written <= 0) | |
795 | continue; | |
796 | ||
797 | s += written; | |
798 | count -= written; | |
799 | canwrite -= written; | |
800 | } | |
801 | ||
802 | if (lf && canwrite <= 0) { | |
803 | const char *crlf = "\r\n"; | |
804 | int i = 2; | |
805 | ||
806 | /* Dodge the original '\n', and put '\r\n' instead. */ | |
807 | s++; | |
808 | count--; | |
809 | do { | |
810 | written = parport_write (port, crlf, i); | |
811 | if (written > 0) | |
812 | i -= written, crlf += written; | |
813 | } while (i > 0 && (CONSOLE_LP_STRICT || written > 0)); | |
814 | } | |
815 | } while (count > 0 && (CONSOLE_LP_STRICT || written > 0)); | |
816 | ||
817 | parport_release (dev); | |
818 | } | |
819 | ||
820 | static struct console lpcons = { | |
821 | .name = "lp", | |
822 | .write = lp_console_write, | |
823 | .flags = CON_PRINTBUFFER, | |
824 | }; | |
825 | ||
826 | #endif /* console on line printer */ | |
827 | ||
828 | /* --- initialisation code ------------------------------------- */ | |
829 | ||
830 | static int parport_nr[LP_NO] = { [0 ... LP_NO-1] = LP_PARPORT_UNSPEC }; | |
f4a1c2bc PM |
831 | static char *parport[LP_NO]; |
832 | static int reset; | |
1da177e4 LT |
833 | |
834 | module_param_array(parport, charp, NULL, 0); | |
835 | module_param(reset, bool, 0); | |
836 | ||
837 | #ifndef MODULE | |
838 | static int __init lp_setup (char *str) | |
839 | { | |
f4a1c2bc | 840 | static int parport_ptr; |
1da177e4 LT |
841 | int x; |
842 | ||
f4a1c2bc | 843 | if (get_option(&str, &x)) { |
1da177e4 LT |
844 | if (x == 0) { |
845 | /* disable driver on "lp=" or "lp=0" */ | |
846 | parport_nr[0] = LP_PARPORT_OFF; | |
847 | } else { | |
848 | printk(KERN_WARNING "warning: 'lp=0x%x' is deprecated, ignored\n", x); | |
849 | return 0; | |
850 | } | |
851 | } else if (!strncmp(str, "parport", 7)) { | |
852 | int n = simple_strtoul(str+7, NULL, 10); | |
853 | if (parport_ptr < LP_NO) | |
854 | parport_nr[parport_ptr++] = n; | |
855 | else | |
856 | printk(KERN_INFO "lp: too many ports, %s ignored.\n", | |
857 | str); | |
858 | } else if (!strcmp(str, "auto")) { | |
859 | parport_nr[0] = LP_PARPORT_AUTO; | |
860 | } else if (!strcmp(str, "none")) { | |
861 | parport_nr[parport_ptr++] = LP_PARPORT_NONE; | |
862 | } else if (!strcmp(str, "reset")) { | |
863 | reset = 1; | |
864 | } | |
865 | return 1; | |
866 | } | |
867 | #endif | |
868 | ||
869 | static int lp_register(int nr, struct parport *port) | |
870 | { | |
871 | lp_table[nr].dev = parport_register_device(port, "lp", | |
872 | lp_preempt, NULL, NULL, 0, | |
873 | (void *) &lp_table[nr]); | |
874 | if (lp_table[nr].dev == NULL) | |
875 | return 1; | |
876 | lp_table[nr].flags |= LP_EXIST; | |
877 | ||
878 | if (reset) | |
879 | lp_reset(nr); | |
880 | ||
03457cd4 GKH |
881 | device_create(lp_class, port->dev, MKDEV(LP_MAJOR, nr), NULL, |
882 | "lp%d", nr); | |
1da177e4 LT |
883 | |
884 | printk(KERN_INFO "lp%d: using %s (%s).\n", nr, port->name, | |
885 | (port->irq == PARPORT_IRQ_NONE)?"polling":"interrupt-driven"); | |
886 | ||
887 | #ifdef CONFIG_LP_CONSOLE | |
888 | if (!nr) { | |
889 | if (port->modes & PARPORT_MODE_SAFEININT) { | |
f4a1c2bc | 890 | register_console(&lpcons); |
1da177e4 LT |
891 | console_registered = port; |
892 | printk (KERN_INFO "lp%d: console ready\n", CONSOLE_LP); | |
893 | } else | |
894 | printk (KERN_ERR "lp%d: cannot run console on %s\n", | |
895 | CONSOLE_LP, port->name); | |
896 | } | |
897 | #endif | |
898 | ||
899 | return 0; | |
900 | } | |
901 | ||
902 | static void lp_attach (struct parport *port) | |
903 | { | |
904 | unsigned int i; | |
905 | ||
f4a1c2bc | 906 | switch (parport_nr[0]) { |
1da177e4 LT |
907 | case LP_PARPORT_UNSPEC: |
908 | case LP_PARPORT_AUTO: | |
909 | if (parport_nr[0] == LP_PARPORT_AUTO && | |
910 | port->probe_info[0].class != PARPORT_CLASS_PRINTER) | |
911 | return; | |
912 | if (lp_count == LP_NO) { | |
913 | printk(KERN_INFO "lp: ignoring parallel port (max. %d)\n",LP_NO); | |
914 | return; | |
915 | } | |
916 | if (!lp_register(lp_count, port)) | |
917 | lp_count++; | |
918 | break; | |
919 | ||
920 | default: | |
921 | for (i = 0; i < LP_NO; i++) { | |
922 | if (port->number == parport_nr[i]) { | |
923 | if (!lp_register(i, port)) | |
924 | lp_count++; | |
925 | break; | |
926 | } | |
927 | } | |
928 | break; | |
929 | } | |
930 | } | |
931 | ||
932 | static void lp_detach (struct parport *port) | |
933 | { | |
934 | /* Write this some day. */ | |
935 | #ifdef CONFIG_LP_CONSOLE | |
936 | if (console_registered == port) { | |
f4a1c2bc | 937 | unregister_console(&lpcons); |
1da177e4 LT |
938 | console_registered = NULL; |
939 | } | |
940 | #endif /* CONFIG_LP_CONSOLE */ | |
941 | } | |
942 | ||
943 | static struct parport_driver lp_driver = { | |
944 | .name = "lp", | |
945 | .attach = lp_attach, | |
946 | .detach = lp_detach, | |
947 | }; | |
948 | ||
949 | static int __init lp_init (void) | |
950 | { | |
951 | int i, err = 0; | |
952 | ||
953 | if (parport_nr[0] == LP_PARPORT_OFF) | |
954 | return 0; | |
955 | ||
956 | for (i = 0; i < LP_NO; i++) { | |
957 | lp_table[i].dev = NULL; | |
958 | lp_table[i].flags = 0; | |
959 | lp_table[i].chars = LP_INIT_CHAR; | |
960 | lp_table[i].time = LP_INIT_TIME; | |
961 | lp_table[i].wait = LP_INIT_WAIT; | |
962 | lp_table[i].lp_buffer = NULL; | |
963 | #ifdef LP_STATS | |
964 | lp_table[i].lastcall = 0; | |
965 | lp_table[i].runchars = 0; | |
966 | memset (&lp_table[i].stats, 0, sizeof (struct lp_stats)); | |
967 | #endif | |
968 | lp_table[i].last_error = 0; | |
969 | init_waitqueue_head (&lp_table[i].waitq); | |
970 | init_waitqueue_head (&lp_table[i].dataq); | |
0a5dcb51 | 971 | mutex_init(&lp_table[i].port_mutex); |
1da177e4 LT |
972 | lp_table[i].timeout = 10 * HZ; |
973 | } | |
974 | ||
975 | if (register_chrdev (LP_MAJOR, "lp", &lp_fops)) { | |
976 | printk (KERN_ERR "lp: unable to get major %d\n", LP_MAJOR); | |
977 | return -EIO; | |
978 | } | |
979 | ||
ca8eca68 | 980 | lp_class = class_create(THIS_MODULE, "printer"); |
1da177e4 LT |
981 | if (IS_ERR(lp_class)) { |
982 | err = PTR_ERR(lp_class); | |
d09d7ddf | 983 | goto out_reg; |
1da177e4 LT |
984 | } |
985 | ||
986 | if (parport_register_driver (&lp_driver)) { | |
987 | printk (KERN_ERR "lp: unable to register with parport\n"); | |
988 | err = -EIO; | |
989 | goto out_class; | |
990 | } | |
991 | ||
992 | if (!lp_count) { | |
993 | printk (KERN_INFO "lp: driver loaded but no devices found\n"); | |
994 | #ifndef CONFIG_PARPORT_1284 | |
995 | if (parport_nr[0] == LP_PARPORT_AUTO) | |
996 | printk (KERN_INFO "lp: (is IEEE 1284 support enabled?)\n"); | |
997 | #endif | |
998 | } | |
999 | ||
1000 | return 0; | |
1001 | ||
1002 | out_class: | |
ca8eca68 | 1003 | class_destroy(lp_class); |
d09d7ddf | 1004 | out_reg: |
1da177e4 LT |
1005 | unregister_chrdev(LP_MAJOR, "lp"); |
1006 | return err; | |
1007 | } | |
1008 | ||
1009 | static int __init lp_init_module (void) | |
1010 | { | |
1011 | if (parport[0]) { | |
1012 | /* The user gave some parameters. Let's see what they were. */ | |
1013 | if (!strncmp(parport[0], "auto", 4)) | |
1014 | parport_nr[0] = LP_PARPORT_AUTO; | |
1015 | else { | |
1016 | int n; | |
1017 | for (n = 0; n < LP_NO && parport[n]; n++) { | |
1018 | if (!strncmp(parport[n], "none", 4)) | |
1019 | parport_nr[n] = LP_PARPORT_NONE; | |
1020 | else { | |
1021 | char *ep; | |
1022 | unsigned long r = simple_strtoul(parport[n], &ep, 0); | |
1023 | if (ep != parport[n]) | |
1024 | parport_nr[n] = r; | |
1025 | else { | |
1026 | printk(KERN_ERR "lp: bad port specifier `%s'\n", parport[n]); | |
1027 | return -ENODEV; | |
1028 | } | |
1029 | } | |
1030 | } | |
1031 | } | |
1032 | } | |
1033 | ||
1034 | return lp_init(); | |
1035 | } | |
1036 | ||
1037 | static void lp_cleanup_module (void) | |
1038 | { | |
1039 | unsigned int offset; | |
1040 | ||
1041 | parport_unregister_driver (&lp_driver); | |
1042 | ||
1043 | #ifdef CONFIG_LP_CONSOLE | |
1044 | unregister_console (&lpcons); | |
1045 | #endif | |
1046 | ||
1047 | unregister_chrdev(LP_MAJOR, "lp"); | |
1048 | for (offset = 0; offset < LP_NO; offset++) { | |
1049 | if (lp_table[offset].dev == NULL) | |
1050 | continue; | |
1051 | parport_unregister_device(lp_table[offset].dev); | |
07c015e7 | 1052 | device_destroy(lp_class, MKDEV(LP_MAJOR, offset)); |
1da177e4 | 1053 | } |
ca8eca68 | 1054 | class_destroy(lp_class); |
1da177e4 LT |
1055 | } |
1056 | ||
1057 | __setup("lp=", lp_setup); | |
1058 | module_init(lp_init_module); | |
1059 | module_exit(lp_cleanup_module); | |
1060 | ||
1061 | MODULE_ALIAS_CHARDEV_MAJOR(LP_MAJOR); | |
1062 | MODULE_LICENSE("GPL"); |