]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * mxser.c -- MOXA Smartio/Industio family multiport serial driver. | |
3 | * | |
4 | * Copyright (C) 1999-2001 Moxa Technologies (support@moxa.com.tw). | |
5 | * | |
6 | * This code is loosely based on the Linux serial driver, written by | |
7 | * Linus Torvalds, Theodore T'so and others. | |
8 | * | |
9 | * This program is free software; you can redistribute it and/or modify | |
10 | * it under the terms of the GNU General Public License as published by | |
11 | * the Free Software Foundation; either version 2 of the License, or | |
8ea2c2ec | 12 | * (at your option) any later version. |
1da177e4 LT |
13 | * |
14 | * This program is distributed in the hope that it will be useful, | |
15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
17 | * GNU General Public License for more details. | |
18 | * | |
19 | * You should have received a copy of the GNU General Public License | |
20 | * along with this program; if not, write to the Free Software | |
21 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
22 | * | |
23 | * Original release 10/26/00 | |
24 | * | |
25 | * 02/06/01 Support MOXA Industio family boards. | |
26 | * 02/06/01 Support TIOCGICOUNT. | |
27 | * 02/06/01 Fix the problem for connecting to serial mouse. | |
28 | * 02/06/01 Fix the problem for H/W flow control. | |
29 | * 02/06/01 Fix the compling warning when CONFIG_PCI | |
30 | * don't be defined. | |
31 | * | |
32 | * Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox | |
33 | * <alan@redhat.com>. The original 1.8 code is available on www.moxa.com. | |
34 | * - Fixed x86_64 cleanness | |
35 | * - Fixed sleep with spinlock held in mxser_send_break | |
36 | */ | |
37 | ||
38 | ||
1da177e4 | 39 | #include <linux/module.h> |
1da177e4 LT |
40 | #include <linux/autoconf.h> |
41 | #include <linux/errno.h> | |
42 | #include <linux/signal.h> | |
43 | #include <linux/sched.h> | |
44 | #include <linux/timer.h> | |
45 | #include <linux/interrupt.h> | |
46 | #include <linux/tty.h> | |
47 | #include <linux/tty_flip.h> | |
48 | #include <linux/serial.h> | |
49 | #include <linux/serial_reg.h> | |
50 | #include <linux/major.h> | |
51 | #include <linux/string.h> | |
52 | #include <linux/fcntl.h> | |
53 | #include <linux/ptrace.h> | |
54 | #include <linux/gfp.h> | |
55 | #include <linux/ioport.h> | |
56 | #include <linux/mm.h> | |
57 | #include <linux/smp_lock.h> | |
58 | #include <linux/delay.h> | |
59 | #include <linux/pci.h> | |
60 | ||
61 | #include <asm/system.h> | |
62 | #include <asm/io.h> | |
63 | #include <asm/irq.h> | |
1da177e4 LT |
64 | #include <asm/bitops.h> |
65 | #include <asm/uaccess.h> | |
66 | ||
67 | #include "mxser.h" | |
68 | ||
69 | #define MXSER_VERSION "1.8" | |
70 | #define MXSERMAJOR 174 | |
71 | #define MXSERCUMAJOR 175 | |
72 | ||
8ea2c2ec JJ |
73 | #define MXSER_EVENT_TXLOW 1 |
74 | #define MXSER_EVENT_HANGUP 2 | |
1da177e4 LT |
75 | |
76 | #define MXSER_BOARDS 4 /* Max. boards */ | |
77 | #define MXSER_PORTS 32 /* Max. ports */ | |
78 | #define MXSER_PORTS_PER_BOARD 8 /* Max. ports per board */ | |
79 | #define MXSER_ISR_PASS_LIMIT 256 | |
80 | ||
81 | #define MXSER_ERR_IOADDR -1 | |
82 | #define MXSER_ERR_IRQ -2 | |
83 | #define MXSER_ERR_IRQ_CONFLIT -3 | |
84 | #define MXSER_ERR_VECTOR -4 | |
85 | ||
86 | #define SERIAL_TYPE_NORMAL 1 | |
87 | #define SERIAL_TYPE_CALLOUT 2 | |
88 | ||
89 | #define WAKEUP_CHARS 256 | |
90 | ||
91 | #define UART_MCR_AFE 0x20 | |
92 | #define UART_LSR_SPECIAL 0x1E | |
93 | ||
8ea2c2ec JJ |
94 | #define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK|\ |
95 | IXON|IXOFF)) | |
1da177e4 | 96 | |
0f2ed4c6 | 97 | #define IRQ_T(info) ((info->flags & ASYNC_SHARE_IRQ) ? IRQF_SHARED : IRQF_DISABLED) |
1da177e4 LT |
98 | |
99 | #define C168_ASIC_ID 1 | |
100 | #define C104_ASIC_ID 2 | |
101 | #define C102_ASIC_ID 0xB | |
102 | #define CI132_ASIC_ID 4 | |
103 | #define CI134_ASIC_ID 3 | |
104 | #define CI104J_ASIC_ID 5 | |
105 | ||
106 | enum { | |
107 | MXSER_BOARD_C168_ISA = 1, | |
108 | MXSER_BOARD_C104_ISA, | |
109 | MXSER_BOARD_CI104J, | |
110 | MXSER_BOARD_C168_PCI, | |
111 | MXSER_BOARD_C104_PCI, | |
112 | MXSER_BOARD_C102_ISA, | |
113 | MXSER_BOARD_CI132, | |
114 | MXSER_BOARD_CI134, | |
115 | MXSER_BOARD_CP132, | |
116 | MXSER_BOARD_CP114, | |
117 | MXSER_BOARD_CT114, | |
118 | MXSER_BOARD_CP102, | |
119 | MXSER_BOARD_CP104U, | |
120 | MXSER_BOARD_CP168U, | |
121 | MXSER_BOARD_CP132U, | |
122 | MXSER_BOARD_CP134U, | |
123 | MXSER_BOARD_CP104JU, | |
124 | MXSER_BOARD_RC7000, | |
125 | MXSER_BOARD_CP118U, | |
126 | MXSER_BOARD_CP102UL, | |
127 | MXSER_BOARD_CP102U, | |
128 | }; | |
129 | ||
130 | static char *mxser_brdname[] = { | |
131 | "C168 series", | |
132 | "C104 series", | |
133 | "CI-104J series", | |
134 | "C168H/PCI series", | |
135 | "C104H/PCI series", | |
136 | "C102 series", | |
137 | "CI-132 series", | |
138 | "CI-134 series", | |
139 | "CP-132 series", | |
140 | "CP-114 series", | |
141 | "CT-114 series", | |
142 | "CP-102 series", | |
143 | "CP-104U series", | |
144 | "CP-168U series", | |
145 | "CP-132U series", | |
146 | "CP-134U series", | |
147 | "CP-104JU series", | |
148 | "Moxa UC7000 Serial", | |
149 | "CP-118U series", | |
150 | "CP-102UL series", | |
151 | "CP-102U series", | |
152 | }; | |
153 | ||
154 | static int mxser_numports[] = { | |
8ea2c2ec JJ |
155 | 8, /* C168-ISA */ |
156 | 4, /* C104-ISA */ | |
157 | 4, /* CI104J */ | |
158 | 8, /* C168-PCI */ | |
159 | 4, /* C104-PCI */ | |
160 | 2, /* C102-ISA */ | |
161 | 2, /* CI132 */ | |
162 | 4, /* CI134 */ | |
163 | 2, /* CP132 */ | |
164 | 4, /* CP114 */ | |
165 | 4, /* CT114 */ | |
166 | 2, /* CP102 */ | |
167 | 4, /* CP104U */ | |
168 | 8, /* CP168U */ | |
169 | 2, /* CP132U */ | |
170 | 4, /* CP134U */ | |
171 | 4, /* CP104JU */ | |
172 | 8, /* RC7000 */ | |
173 | 8, /* CP118U */ | |
174 | 2, /* CP102UL */ | |
175 | 2, /* CP102U */ | |
1da177e4 LT |
176 | }; |
177 | ||
178 | #define UART_TYPE_NUM 2 | |
179 | ||
180 | static const unsigned int Gmoxa_uart_id[UART_TYPE_NUM] = { | |
181 | MOXA_MUST_MU150_HWID, | |
182 | MOXA_MUST_MU860_HWID | |
183 | }; | |
184 | ||
8ea2c2ec | 185 | /* This is only for PCI */ |
1da177e4 LT |
186 | #define UART_INFO_NUM 3 |
187 | struct mxpciuart_info { | |
188 | int type; | |
189 | int tx_fifo; | |
190 | int rx_fifo; | |
191 | int xmit_fifo_size; | |
192 | int rx_high_water; | |
193 | int rx_trigger; | |
194 | int rx_low_water; | |
195 | long max_baud; | |
196 | }; | |
197 | ||
198 | static const struct mxpciuart_info Gpci_uart_info[UART_INFO_NUM] = { | |
199 | {MOXA_OTHER_UART, 16, 16, 16, 14, 14, 1, 921600L}, | |
200 | {MOXA_MUST_MU150_HWID, 64, 64, 64, 48, 48, 16, 230400L}, | |
201 | {MOXA_MUST_MU860_HWID, 128, 128, 128, 96, 96, 32, 921600L} | |
202 | }; | |
203 | ||
204 | ||
205 | #ifdef CONFIG_PCI | |
206 | ||
207 | static struct pci_device_id mxser_pcibrds[] = { | |
208 | {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C168, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_C168_PCI}, | |
209 | {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C104, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_C104_PCI}, | |
210 | {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP132}, | |
211 | {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP114}, | |
212 | {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CT114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CT114}, | |
213 | {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP102}, | |
214 | {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP104U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP104U}, | |
215 | {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP168U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP168U}, | |
216 | {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP132U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP132U}, | |
217 | {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP134U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP134U}, | |
218 | {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP104JU, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP104JU}, | |
219 | {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_RC7000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_RC7000}, | |
220 | {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP118U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP118U}, | |
221 | {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102UL, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP102UL}, | |
222 | {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP102U}, | |
223 | {0} | |
224 | }; | |
225 | ||
226 | MODULE_DEVICE_TABLE(pci, mxser_pcibrds); | |
227 | ||
228 | ||
229 | #endif | |
230 | ||
231 | typedef struct _moxa_pci_info { | |
232 | unsigned short busNum; | |
233 | unsigned short devNum; | |
8ea2c2ec | 234 | struct pci_dev *pdev; /* add by Victor Yu. 06-23-2003 */ |
1da177e4 LT |
235 | } moxa_pci_info; |
236 | ||
237 | static int ioaddr[MXSER_BOARDS] = { 0, 0, 0, 0 }; | |
238 | static int ttymajor = MXSERMAJOR; | |
239 | static int calloutmajor = MXSERCUMAJOR; | |
240 | static int verbose = 0; | |
241 | ||
242 | /* Variables for insmod */ | |
243 | ||
244 | MODULE_AUTHOR("Casper Yang"); | |
245 | MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver"); | |
8d3b33f6 RR |
246 | module_param_array(ioaddr, int, NULL, 0); |
247 | module_param(ttymajor, int, 0); | |
248 | module_param(calloutmajor, int, 0); | |
249 | module_param(verbose, bool, 0); | |
1da177e4 LT |
250 | MODULE_LICENSE("GPL"); |
251 | ||
252 | struct mxser_log { | |
253 | int tick; | |
254 | unsigned long rxcnt[MXSER_PORTS]; | |
255 | unsigned long txcnt[MXSER_PORTS]; | |
256 | }; | |
257 | ||
258 | ||
259 | struct mxser_mon { | |
260 | unsigned long rxcnt; | |
261 | unsigned long txcnt; | |
262 | unsigned long up_rxcnt; | |
263 | unsigned long up_txcnt; | |
264 | int modem_status; | |
265 | unsigned char hold_reason; | |
266 | }; | |
267 | ||
268 | struct mxser_mon_ext { | |
269 | unsigned long rx_cnt[32]; | |
270 | unsigned long tx_cnt[32]; | |
271 | unsigned long up_rxcnt[32]; | |
272 | unsigned long up_txcnt[32]; | |
273 | int modem_status[32]; | |
274 | ||
275 | long baudrate[32]; | |
276 | int databits[32]; | |
277 | int stopbits[32]; | |
278 | int parity[32]; | |
279 | int flowctrl[32]; | |
280 | int fifo[32]; | |
281 | int iftype[32]; | |
282 | }; | |
8ea2c2ec | 283 | |
1da177e4 LT |
284 | struct mxser_hwconf { |
285 | int board_type; | |
286 | int ports; | |
287 | int irq; | |
288 | int vector; | |
289 | int vector_mask; | |
290 | int uart_type; | |
291 | int ioaddr[MXSER_PORTS_PER_BOARD]; | |
292 | int baud_base[MXSER_PORTS_PER_BOARD]; | |
293 | moxa_pci_info pciInfo; | |
8ea2c2ec JJ |
294 | int IsMoxaMustChipFlag; /* add by Victor Yu. 08-30-2002 */ |
295 | int MaxCanSetBaudRate[MXSER_PORTS_PER_BOARD]; /* add by Victor Yu. 09-04-2002 */ | |
296 | int opmode_ioaddr[MXSER_PORTS_PER_BOARD]; /* add by Victor Yu. 01-05-2004 */ | |
1da177e4 LT |
297 | }; |
298 | ||
299 | struct mxser_struct { | |
300 | int port; | |
301 | int base; /* port base address */ | |
302 | int irq; /* port using irq no. */ | |
303 | int vector; /* port irq vector */ | |
304 | int vectormask; /* port vector mask */ | |
305 | int rx_high_water; | |
306 | int rx_trigger; /* Rx fifo trigger level */ | |
307 | int rx_low_water; | |
308 | int baud_base; /* max. speed */ | |
309 | int flags; /* defined in tty.h */ | |
310 | int type; /* UART type */ | |
311 | struct tty_struct *tty; | |
312 | int read_status_mask; | |
313 | int ignore_status_mask; | |
314 | int xmit_fifo_size; | |
315 | int custom_divisor; | |
316 | int x_char; /* xon/xoff character */ | |
317 | int close_delay; | |
318 | unsigned short closing_wait; | |
319 | int IER; /* Interrupt Enable Register */ | |
320 | int MCR; /* Modem control register */ | |
321 | unsigned long event; | |
322 | int count; /* # of fd on device */ | |
323 | int blocked_open; /* # of blocked opens */ | |
324 | long session; /* Session of opening process */ | |
325 | long pgrp; /* pgrp of opening process */ | |
326 | unsigned char *xmit_buf; | |
327 | int xmit_head; | |
328 | int xmit_tail; | |
329 | int xmit_cnt; | |
330 | struct work_struct tqueue; | |
331 | struct termios normal_termios; | |
332 | struct termios callout_termios; | |
333 | wait_queue_head_t open_wait; | |
334 | wait_queue_head_t close_wait; | |
335 | wait_queue_head_t delta_msr_wait; | |
336 | struct async_icount icount; /* kernel counters for the 4 input interrupts */ | |
337 | int timeout; | |
8ea2c2ec JJ |
338 | int IsMoxaMustChipFlag; /* add by Victor Yu. 08-30-2002 */ |
339 | int MaxCanSetBaudRate; /* add by Victor Yu. 09-04-2002 */ | |
340 | int opmode_ioaddr; /* add by Victor Yu. 01-05-2004 */ | |
1da177e4 LT |
341 | unsigned char stop_rx; |
342 | unsigned char ldisc_stop_rx; | |
343 | long realbaud; | |
344 | struct mxser_mon mon_data; | |
345 | unsigned char err_shadow; | |
346 | spinlock_t slock; | |
347 | }; | |
348 | ||
1da177e4 LT |
349 | struct mxser_mstatus { |
350 | tcflag_t cflag; | |
351 | int cts; | |
352 | int dsr; | |
353 | int ri; | |
354 | int dcd; | |
355 | }; | |
356 | ||
357 | static struct mxser_mstatus GMStatus[MXSER_PORTS]; | |
358 | ||
359 | static int mxserBoardCAP[MXSER_BOARDS] = { | |
360 | 0, 0, 0, 0 | |
8ea2c2ec | 361 | /* 0x180, 0x280, 0x200, 0x320 */ |
1da177e4 LT |
362 | }; |
363 | ||
364 | static struct tty_driver *mxvar_sdriver; | |
365 | static struct mxser_struct mxvar_table[MXSER_PORTS]; | |
366 | static struct tty_struct *mxvar_tty[MXSER_PORTS + 1]; | |
367 | static struct termios *mxvar_termios[MXSER_PORTS + 1]; | |
368 | static struct termios *mxvar_termios_locked[MXSER_PORTS + 1]; | |
369 | static struct mxser_log mxvar_log; | |
370 | static int mxvar_diagflag; | |
371 | static unsigned char mxser_msr[MXSER_PORTS + 1]; | |
372 | static struct mxser_mon_ext mon_data_ext; | |
373 | static int mxser_set_baud_method[MXSER_PORTS + 1]; | |
374 | static spinlock_t gm_lock; | |
375 | ||
376 | /* | |
377 | * This is used to figure out the divisor speeds and the timeouts | |
378 | */ | |
379 | ||
380 | static struct mxser_hwconf mxsercfg[MXSER_BOARDS]; | |
381 | ||
382 | /* | |
383 | * static functions: | |
384 | */ | |
385 | ||
386 | static void mxser_getcfg(int board, struct mxser_hwconf *hwconf); | |
387 | static int mxser_init(void); | |
388 | ||
8ea2c2ec | 389 | /* static void mxser_poll(unsigned long); */ |
1da177e4 LT |
390 | static int mxser_get_ISA_conf(int, struct mxser_hwconf *); |
391 | static int mxser_get_PCI_conf(int, int, int, struct mxser_hwconf *); | |
392 | static void mxser_do_softint(void *); | |
393 | static int mxser_open(struct tty_struct *, struct file *); | |
394 | static void mxser_close(struct tty_struct *, struct file *); | |
395 | static int mxser_write(struct tty_struct *, const unsigned char *, int); | |
396 | static int mxser_write_room(struct tty_struct *); | |
397 | static void mxser_flush_buffer(struct tty_struct *); | |
398 | static int mxser_chars_in_buffer(struct tty_struct *); | |
399 | static void mxser_flush_chars(struct tty_struct *); | |
400 | static void mxser_put_char(struct tty_struct *, unsigned char); | |
401 | static int mxser_ioctl(struct tty_struct *, struct file *, uint, ulong); | |
402 | static int mxser_ioctl_special(unsigned int, void __user *); | |
403 | static void mxser_throttle(struct tty_struct *); | |
404 | static void mxser_unthrottle(struct tty_struct *); | |
405 | static void mxser_set_termios(struct tty_struct *, struct termios *); | |
406 | static void mxser_stop(struct tty_struct *); | |
407 | static void mxser_start(struct tty_struct *); | |
408 | static void mxser_hangup(struct tty_struct *); | |
409 | static void mxser_rs_break(struct tty_struct *, int); | |
410 | static irqreturn_t mxser_interrupt(int, void *, struct pt_regs *); | |
411 | static void mxser_receive_chars(struct mxser_struct *, int *); | |
412 | static void mxser_transmit_chars(struct mxser_struct *); | |
413 | static void mxser_check_modem_status(struct mxser_struct *, int); | |
414 | static int mxser_block_til_ready(struct tty_struct *, struct file *, struct mxser_struct *); | |
415 | static int mxser_startup(struct mxser_struct *); | |
416 | static void mxser_shutdown(struct mxser_struct *); | |
417 | static int mxser_change_speed(struct mxser_struct *, struct termios *old_termios); | |
418 | static int mxser_get_serial_info(struct mxser_struct *, struct serial_struct __user *); | |
419 | static int mxser_set_serial_info(struct mxser_struct *, struct serial_struct __user *); | |
420 | static int mxser_get_lsr_info(struct mxser_struct *, unsigned int __user *); | |
421 | static void mxser_send_break(struct mxser_struct *, int); | |
422 | static int mxser_tiocmget(struct tty_struct *, struct file *); | |
423 | static int mxser_tiocmset(struct tty_struct *, struct file *, unsigned int, unsigned int); | |
424 | static int mxser_set_baud(struct mxser_struct *info, long newspd); | |
425 | static void mxser_wait_until_sent(struct tty_struct *tty, int timeout); | |
426 | ||
427 | static void mxser_startrx(struct tty_struct *tty); | |
428 | static void mxser_stoprx(struct tty_struct *tty); | |
429 | ||
430 | ||
431 | static int CheckIsMoxaMust(int io) | |
432 | { | |
433 | u8 oldmcr, hwid; | |
434 | int i; | |
435 | ||
436 | outb(0, io + UART_LCR); | |
437 | DISABLE_MOXA_MUST_ENCHANCE_MODE(io); | |
438 | oldmcr = inb(io + UART_MCR); | |
439 | outb(0, io + UART_MCR); | |
440 | SET_MOXA_MUST_XON1_VALUE(io, 0x11); | |
441 | if ((hwid = inb(io + UART_MCR)) != 0) { | |
442 | outb(oldmcr, io + UART_MCR); | |
8ea2c2ec | 443 | return MOXA_OTHER_UART; |
1da177e4 LT |
444 | } |
445 | ||
446 | GET_MOXA_MUST_HARDWARE_ID(io, &hwid); | |
447 | for (i = 0; i < UART_TYPE_NUM; i++) { | |
448 | if (hwid == Gmoxa_uart_id[i]) | |
8ea2c2ec | 449 | return (int)hwid; |
1da177e4 LT |
450 | } |
451 | return MOXA_OTHER_UART; | |
452 | } | |
453 | ||
8ea2c2ec | 454 | /* above is modified by Victor Yu. 08-15-2002 */ |
1da177e4 LT |
455 | |
456 | static struct tty_operations mxser_ops = { | |
457 | .open = mxser_open, | |
458 | .close = mxser_close, | |
459 | .write = mxser_write, | |
460 | .put_char = mxser_put_char, | |
461 | .flush_chars = mxser_flush_chars, | |
462 | .write_room = mxser_write_room, | |
463 | .chars_in_buffer = mxser_chars_in_buffer, | |
464 | .flush_buffer = mxser_flush_buffer, | |
465 | .ioctl = mxser_ioctl, | |
466 | .throttle = mxser_throttle, | |
467 | .unthrottle = mxser_unthrottle, | |
468 | .set_termios = mxser_set_termios, | |
469 | .stop = mxser_stop, | |
470 | .start = mxser_start, | |
471 | .hangup = mxser_hangup, | |
57432345 KS |
472 | .break_ctl = mxser_rs_break, |
473 | .wait_until_sent = mxser_wait_until_sent, | |
1da177e4 LT |
474 | .tiocmget = mxser_tiocmget, |
475 | .tiocmset = mxser_tiocmset, | |
476 | }; | |
477 | ||
478 | /* | |
479 | * The MOXA Smartio/Industio serial driver boot-time initialization code! | |
480 | */ | |
481 | ||
482 | static int __init mxser_module_init(void) | |
483 | { | |
484 | int ret; | |
485 | ||
486 | if (verbose) | |
487 | printk(KERN_DEBUG "Loading module mxser ...\n"); | |
488 | ret = mxser_init(); | |
489 | if (verbose) | |
490 | printk(KERN_DEBUG "Done.\n"); | |
491 | return ret; | |
492 | } | |
493 | ||
494 | static void __exit mxser_module_exit(void) | |
495 | { | |
64698b69 | 496 | int i, err; |
1da177e4 LT |
497 | |
498 | if (verbose) | |
499 | printk(KERN_DEBUG "Unloading module mxser ...\n"); | |
500 | ||
64698b69 KS |
501 | err = tty_unregister_driver(mxvar_sdriver); |
502 | if (!err) | |
503 | put_tty_driver(mxvar_sdriver); | |
504 | else | |
1da177e4 LT |
505 | printk(KERN_ERR "Couldn't unregister MOXA Smartio/Industio family serial driver\n"); |
506 | ||
507 | for (i = 0; i < MXSER_BOARDS; i++) { | |
508 | struct pci_dev *pdev; | |
509 | ||
510 | if (mxsercfg[i].board_type == -1) | |
511 | continue; | |
512 | else { | |
513 | pdev = mxsercfg[i].pciInfo.pdev; | |
514 | free_irq(mxsercfg[i].irq, &mxvar_table[i * MXSER_PORTS_PER_BOARD]); | |
8ea2c2ec | 515 | if (pdev != NULL) { /* PCI */ |
1da177e4 LT |
516 | release_region(pci_resource_start(pdev, 2), pci_resource_len(pdev, 2)); |
517 | release_region(pci_resource_start(pdev, 3), pci_resource_len(pdev, 3)); | |
518 | } else { | |
519 | release_region(mxsercfg[i].ioaddr[0], 8 * mxsercfg[i].ports); | |
520 | release_region(mxsercfg[i].vector, 1); | |
521 | } | |
522 | } | |
523 | } | |
524 | if (verbose) | |
525 | printk(KERN_DEBUG "Done.\n"); | |
1da177e4 LT |
526 | } |
527 | ||
528 | static void process_txrx_fifo(struct mxser_struct *info) | |
529 | { | |
530 | int i; | |
531 | ||
532 | if ((info->type == PORT_16450) || (info->type == PORT_8250)) { | |
533 | info->rx_trigger = 1; | |
534 | info->rx_high_water = 1; | |
535 | info->rx_low_water = 1; | |
536 | info->xmit_fifo_size = 1; | |
537 | } else { | |
538 | for (i = 0; i < UART_INFO_NUM; i++) { | |
539 | if (info->IsMoxaMustChipFlag == Gpci_uart_info[i].type) { | |
540 | info->rx_trigger = Gpci_uart_info[i].rx_trigger; | |
541 | info->rx_low_water = Gpci_uart_info[i].rx_low_water; | |
542 | info->rx_high_water = Gpci_uart_info[i].rx_high_water; | |
543 | info->xmit_fifo_size = Gpci_uart_info[i].xmit_fifo_size; | |
544 | break; | |
545 | } | |
546 | } | |
547 | } | |
548 | } | |
549 | ||
550 | static int mxser_initbrd(int board, struct mxser_hwconf *hwconf) | |
551 | { | |
552 | struct mxser_struct *info; | |
553 | int retval; | |
554 | int i, n; | |
555 | ||
556 | n = board * MXSER_PORTS_PER_BOARD; | |
557 | info = &mxvar_table[n]; | |
558 | /*if (verbose) */ { | |
8ea2c2ec JJ |
559 | printk(KERN_DEBUG " ttyM%d - ttyM%d ", |
560 | n, n + hwconf->ports - 1); | |
561 | printk(" max. baud rate = %d bps.\n", | |
562 | hwconf->MaxCanSetBaudRate[0]); | |
1da177e4 LT |
563 | } |
564 | ||
565 | for (i = 0; i < hwconf->ports; i++, n++, info++) { | |
566 | info->port = n; | |
567 | info->base = hwconf->ioaddr[i]; | |
568 | info->irq = hwconf->irq; | |
569 | info->vector = hwconf->vector; | |
570 | info->vectormask = hwconf->vector_mask; | |
8ea2c2ec | 571 | info->opmode_ioaddr = hwconf->opmode_ioaddr[i]; /* add by Victor Yu. 01-05-2004 */ |
1da177e4 LT |
572 | info->stop_rx = 0; |
573 | info->ldisc_stop_rx = 0; | |
574 | ||
575 | info->IsMoxaMustChipFlag = hwconf->IsMoxaMustChipFlag; | |
8ea2c2ec | 576 | /* Enhance mode enabled here */ |
1da177e4 LT |
577 | if (info->IsMoxaMustChipFlag != MOXA_OTHER_UART) { |
578 | ENABLE_MOXA_MUST_ENCHANCE_MODE(info->base); | |
579 | } | |
580 | ||
581 | info->flags = ASYNC_SHARE_IRQ; | |
582 | info->type = hwconf->uart_type; | |
583 | info->baud_base = hwconf->baud_base[i]; | |
584 | ||
585 | info->MaxCanSetBaudRate = hwconf->MaxCanSetBaudRate[i]; | |
586 | ||
587 | process_txrx_fifo(info); | |
588 | ||
589 | ||
590 | info->custom_divisor = hwconf->baud_base[i] * 16; | |
591 | info->close_delay = 5 * HZ / 10; | |
592 | info->closing_wait = 30 * HZ; | |
593 | INIT_WORK(&info->tqueue, mxser_do_softint, info); | |
594 | info->normal_termios = mxvar_sdriver->init_termios; | |
595 | init_waitqueue_head(&info->open_wait); | |
596 | init_waitqueue_head(&info->close_wait); | |
597 | init_waitqueue_head(&info->delta_msr_wait); | |
598 | memset(&info->mon_data, 0, sizeof(struct mxser_mon)); | |
599 | info->err_shadow = 0; | |
600 | spin_lock_init(&info->slock); | |
601 | } | |
602 | /* | |
603 | * Allocate the IRQ if necessary | |
604 | */ | |
605 | ||
606 | ||
607 | /* before set INT ISR, disable all int */ | |
608 | for (i = 0; i < hwconf->ports; i++) { | |
8ea2c2ec JJ |
609 | outb(inb(hwconf->ioaddr[i] + UART_IER) & 0xf0, |
610 | hwconf->ioaddr[i] + UART_IER); | |
1da177e4 LT |
611 | } |
612 | ||
613 | n = board * MXSER_PORTS_PER_BOARD; | |
614 | info = &mxvar_table[n]; | |
615 | ||
8ea2c2ec JJ |
616 | retval = request_irq(hwconf->irq, mxser_interrupt, IRQ_T(info), |
617 | "mxser", info); | |
1da177e4 | 618 | if (retval) { |
8ea2c2ec JJ |
619 | printk(KERN_ERR "Board %d: %s", |
620 | board, mxser_brdname[hwconf->board_type - 1]); | |
621 | printk(" Request irq failed, IRQ (%d) may conflict with" | |
622 | " another device.\n", info->irq); | |
1da177e4 LT |
623 | return retval; |
624 | } | |
625 | return 0; | |
626 | } | |
627 | ||
1da177e4 LT |
628 | static void mxser_getcfg(int board, struct mxser_hwconf *hwconf) |
629 | { | |
630 | mxsercfg[board] = *hwconf; | |
631 | } | |
632 | ||
633 | #ifdef CONFIG_PCI | |
634 | static int mxser_get_PCI_conf(int busnum, int devnum, int board_type, struct mxser_hwconf *hwconf) | |
635 | { | |
636 | int i, j; | |
8ea2c2ec | 637 | /* unsigned int val; */ |
1da177e4 LT |
638 | unsigned int ioaddress; |
639 | struct pci_dev *pdev = hwconf->pciInfo.pdev; | |
640 | ||
8ea2c2ec | 641 | /* io address */ |
1da177e4 LT |
642 | hwconf->board_type = board_type; |
643 | hwconf->ports = mxser_numports[board_type - 1]; | |
644 | ioaddress = pci_resource_start(pdev, 2); | |
8ea2c2ec JJ |
645 | request_region(pci_resource_start(pdev, 2), pci_resource_len(pdev, 2), |
646 | "mxser(IO)"); | |
1da177e4 | 647 | |
8ea2c2ec | 648 | for (i = 0; i < hwconf->ports; i++) |
1da177e4 | 649 | hwconf->ioaddr[i] = ioaddress + 8 * i; |
1da177e4 | 650 | |
8ea2c2ec | 651 | /* vector */ |
1da177e4 | 652 | ioaddress = pci_resource_start(pdev, 3); |
8ea2c2ec JJ |
653 | request_region(pci_resource_start(pdev, 3), pci_resource_len(pdev, 3), |
654 | "mxser(vector)"); | |
1da177e4 LT |
655 | hwconf->vector = ioaddress; |
656 | ||
8ea2c2ec | 657 | /* irq */ |
1da177e4 LT |
658 | hwconf->irq = hwconf->pciInfo.pdev->irq; |
659 | ||
660 | hwconf->IsMoxaMustChipFlag = CheckIsMoxaMust(hwconf->ioaddr[0]); | |
661 | hwconf->uart_type = PORT_16550A; | |
662 | hwconf->vector_mask = 0; | |
663 | ||
664 | ||
665 | for (i = 0; i < hwconf->ports; i++) { | |
666 | for (j = 0; j < UART_INFO_NUM; j++) { | |
667 | if (Gpci_uart_info[j].type == hwconf->IsMoxaMustChipFlag) { | |
668 | hwconf->MaxCanSetBaudRate[i] = Gpci_uart_info[j].max_baud; | |
669 | ||
8ea2c2ec | 670 | /* exception....CP-102 */ |
1da177e4 LT |
671 | if (board_type == MXSER_BOARD_CP102) |
672 | hwconf->MaxCanSetBaudRate[i] = 921600; | |
673 | break; | |
674 | } | |
675 | } | |
676 | } | |
677 | ||
678 | if (hwconf->IsMoxaMustChipFlag == MOXA_MUST_MU860_HWID) { | |
679 | for (i = 0; i < hwconf->ports; i++) { | |
680 | if (i < 4) | |
681 | hwconf->opmode_ioaddr[i] = ioaddress + 4; | |
682 | else | |
683 | hwconf->opmode_ioaddr[i] = ioaddress + 0x0c; | |
684 | } | |
8ea2c2ec JJ |
685 | outb(0, ioaddress + 4); /* default set to RS232 mode */ |
686 | outb(0, ioaddress + 0x0c); /* default set to RS232 mode */ | |
1da177e4 LT |
687 | } |
688 | ||
689 | for (i = 0; i < hwconf->ports; i++) { | |
690 | hwconf->vector_mask |= (1 << i); | |
691 | hwconf->baud_base[i] = 921600; | |
692 | } | |
8ea2c2ec | 693 | return 0; |
1da177e4 LT |
694 | } |
695 | #endif | |
696 | ||
697 | static int mxser_init(void) | |
698 | { | |
699 | int i, m, retval, b, n; | |
1da177e4 LT |
700 | struct pci_dev *pdev = NULL; |
701 | int index; | |
702 | unsigned char busnum, devnum; | |
703 | struct mxser_hwconf hwconf; | |
704 | ||
705 | mxvar_sdriver = alloc_tty_driver(MXSER_PORTS + 1); | |
706 | if (!mxvar_sdriver) | |
707 | return -ENOMEM; | |
708 | spin_lock_init(&gm_lock); | |
709 | ||
710 | for (i = 0; i < MXSER_BOARDS; i++) { | |
711 | mxsercfg[i].board_type = -1; | |
712 | } | |
713 | ||
8ea2c2ec JJ |
714 | printk(KERN_INFO "MOXA Smartio/Industio family driver version %s\n", |
715 | MXSER_VERSION); | |
1da177e4 LT |
716 | |
717 | /* Initialize the tty_driver structure */ | |
718 | memset(mxvar_sdriver, 0, sizeof(struct tty_driver)); | |
719 | mxvar_sdriver->magic = TTY_DRIVER_MAGIC; | |
720 | mxvar_sdriver->name = "ttyM"; | |
721 | mxvar_sdriver->major = ttymajor; | |
722 | mxvar_sdriver->minor_start = 0; | |
723 | mxvar_sdriver->num = MXSER_PORTS + 1; | |
724 | mxvar_sdriver->type = TTY_DRIVER_TYPE_SERIAL; | |
725 | mxvar_sdriver->subtype = SERIAL_TYPE_NORMAL; | |
726 | mxvar_sdriver->init_termios = tty_std_termios; | |
8ea2c2ec | 727 | mxvar_sdriver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL; |
1da177e4 LT |
728 | mxvar_sdriver->flags = TTY_DRIVER_REAL_RAW; |
729 | tty_set_operations(mxvar_sdriver, &mxser_ops); | |
730 | mxvar_sdriver->ttys = mxvar_tty; | |
731 | mxvar_sdriver->termios = mxvar_termios; | |
732 | mxvar_sdriver->termios_locked = mxvar_termios_locked; | |
733 | ||
1da177e4 LT |
734 | mxvar_diagflag = 0; |
735 | memset(mxvar_table, 0, MXSER_PORTS * sizeof(struct mxser_struct)); | |
736 | memset(&mxvar_log, 0, sizeof(struct mxser_log)); | |
737 | ||
738 | memset(&mxser_msr, 0, sizeof(unsigned char) * (MXSER_PORTS + 1)); | |
739 | memset(&mon_data_ext, 0, sizeof(struct mxser_mon_ext)); | |
740 | memset(&mxser_set_baud_method, 0, sizeof(int) * (MXSER_PORTS + 1)); | |
741 | memset(&hwconf, 0, sizeof(struct mxser_hwconf)); | |
742 | ||
743 | m = 0; | |
744 | /* Start finding ISA boards here */ | |
745 | for (b = 0; b < MXSER_BOARDS && m < MXSER_BOARDS; b++) { | |
746 | int cap; | |
8ea2c2ec | 747 | |
1da177e4 LT |
748 | if (!(cap = mxserBoardCAP[b])) |
749 | continue; | |
750 | ||
751 | retval = mxser_get_ISA_conf(cap, &hwconf); | |
752 | ||
753 | if (retval != 0) | |
8ea2c2ec JJ |
754 | printk(KERN_INFO "Found MOXA %s board (CAP=0x%x)\n", |
755 | mxser_brdname[hwconf.board_type - 1], ioaddr[b]); | |
1da177e4 LT |
756 | |
757 | if (retval <= 0) { | |
758 | if (retval == MXSER_ERR_IRQ) | |
8ea2c2ec JJ |
759 | printk(KERN_ERR "Invalid interrupt number, " |
760 | "board not configured\n"); | |
1da177e4 | 761 | else if (retval == MXSER_ERR_IRQ_CONFLIT) |
8ea2c2ec JJ |
762 | printk(KERN_ERR "Invalid interrupt number, " |
763 | "board not configured\n"); | |
1da177e4 | 764 | else if (retval == MXSER_ERR_VECTOR) |
8ea2c2ec JJ |
765 | printk(KERN_ERR "Invalid interrupt vector, " |
766 | "board not configured\n"); | |
1da177e4 | 767 | else if (retval == MXSER_ERR_IOADDR) |
8ea2c2ec JJ |
768 | printk(KERN_ERR "Invalid I/O address, " |
769 | "board not configured\n"); | |
1da177e4 LT |
770 | |
771 | continue; | |
772 | } | |
773 | ||
774 | hwconf.pciInfo.busNum = 0; | |
775 | hwconf.pciInfo.devNum = 0; | |
776 | hwconf.pciInfo.pdev = NULL; | |
777 | ||
778 | mxser_getcfg(m, &hwconf); | |
8ea2c2ec JJ |
779 | /* |
780 | * init mxsercfg first, | |
781 | * or mxsercfg data is not correct on ISR. | |
782 | */ | |
783 | /* mxser_initbrd will hook ISR. */ | |
1da177e4 LT |
784 | if (mxser_initbrd(m, &hwconf) < 0) |
785 | continue; | |
786 | ||
1da177e4 LT |
787 | m++; |
788 | } | |
789 | ||
790 | /* Start finding ISA boards from module arg */ | |
791 | for (b = 0; b < MXSER_BOARDS && m < MXSER_BOARDS; b++) { | |
792 | int cap; | |
8ea2c2ec | 793 | |
1da177e4 LT |
794 | if (!(cap = ioaddr[b])) |
795 | continue; | |
796 | ||
797 | retval = mxser_get_ISA_conf(cap, &hwconf); | |
798 | ||
799 | if (retval != 0) | |
8ea2c2ec JJ |
800 | printk(KERN_INFO "Found MOXA %s board (CAP=0x%x)\n", |
801 | mxser_brdname[hwconf.board_type - 1], ioaddr[b]); | |
1da177e4 LT |
802 | |
803 | if (retval <= 0) { | |
804 | if (retval == MXSER_ERR_IRQ) | |
8ea2c2ec JJ |
805 | printk(KERN_ERR "Invalid interrupt number, " |
806 | "board not configured\n"); | |
1da177e4 | 807 | else if (retval == MXSER_ERR_IRQ_CONFLIT) |
8ea2c2ec JJ |
808 | printk(KERN_ERR "Invalid interrupt number, " |
809 | "board not configured\n"); | |
1da177e4 | 810 | else if (retval == MXSER_ERR_VECTOR) |
8ea2c2ec JJ |
811 | printk(KERN_ERR "Invalid interrupt vector, " |
812 | "board not configured\n"); | |
1da177e4 | 813 | else if (retval == MXSER_ERR_IOADDR) |
8ea2c2ec JJ |
814 | printk(KERN_ERR "Invalid I/O address, " |
815 | "board not configured\n"); | |
1da177e4 LT |
816 | |
817 | continue; | |
818 | } | |
819 | ||
820 | hwconf.pciInfo.busNum = 0; | |
821 | hwconf.pciInfo.devNum = 0; | |
822 | hwconf.pciInfo.pdev = NULL; | |
823 | ||
824 | mxser_getcfg(m, &hwconf); | |
8ea2c2ec JJ |
825 | /* |
826 | * init mxsercfg first, | |
827 | * or mxsercfg data is not correct on ISR. | |
828 | */ | |
829 | /* mxser_initbrd will hook ISR. */ | |
1da177e4 LT |
830 | if (mxser_initbrd(m, &hwconf) < 0) |
831 | continue; | |
832 | ||
833 | m++; | |
834 | } | |
835 | ||
836 | /* start finding PCI board here */ | |
837 | #ifdef CONFIG_PCI | |
fe971071 | 838 | n = ARRAY_SIZE(mxser_pcibrds) - 1; |
1da177e4 LT |
839 | index = 0; |
840 | b = 0; | |
841 | while (b < n) { | |
8ea2c2ec JJ |
842 | pdev = pci_find_device(mxser_pcibrds[b].vendor, |
843 | mxser_pcibrds[b].device, pdev); | |
1da177e4 LT |
844 | if (pdev == NULL) { |
845 | b++; | |
846 | continue; | |
847 | } | |
848 | hwconf.pciInfo.busNum = busnum = pdev->bus->number; | |
849 | hwconf.pciInfo.devNum = devnum = PCI_SLOT(pdev->devfn) << 3; | |
850 | hwconf.pciInfo.pdev = pdev; | |
8ea2c2ec JJ |
851 | printk(KERN_INFO "Found MOXA %s board(BusNo=%d,DevNo=%d)\n", |
852 | mxser_brdname[(int) (mxser_pcibrds[b].driver_data) - 1], | |
853 | busnum, devnum >> 3); | |
1da177e4 | 854 | index++; |
8ea2c2ec JJ |
855 | if (m >= MXSER_BOARDS) |
856 | printk(KERN_ERR | |
857 | "Too many Smartio/Industio family boards find " | |
858 | "(maximum %d), board not configured\n", | |
859 | MXSER_BOARDS); | |
860 | else { | |
1da177e4 | 861 | if (pci_enable_device(pdev)) { |
8ea2c2ec JJ |
862 | printk(KERN_ERR "Moxa SmartI/O PCI enable " |
863 | "fail !\n"); | |
1da177e4 LT |
864 | continue; |
865 | } | |
8ea2c2ec JJ |
866 | retval = mxser_get_PCI_conf(busnum, devnum, |
867 | (int)mxser_pcibrds[b].driver_data, | |
868 | &hwconf); | |
1da177e4 LT |
869 | if (retval < 0) { |
870 | if (retval == MXSER_ERR_IRQ) | |
8ea2c2ec JJ |
871 | printk(KERN_ERR |
872 | "Invalid interrupt number, " | |
873 | "board not configured\n"); | |
1da177e4 | 874 | else if (retval == MXSER_ERR_IRQ_CONFLIT) |
8ea2c2ec JJ |
875 | printk(KERN_ERR |
876 | "Invalid interrupt number, " | |
877 | "board not configured\n"); | |
1da177e4 | 878 | else if (retval == MXSER_ERR_VECTOR) |
8ea2c2ec JJ |
879 | printk(KERN_ERR |
880 | "Invalid interrupt vector, " | |
881 | "board not configured\n"); | |
1da177e4 | 882 | else if (retval == MXSER_ERR_IOADDR) |
8ea2c2ec JJ |
883 | printk(KERN_ERR |
884 | "Invalid I/O address, " | |
885 | "board not configured\n"); | |
1da177e4 LT |
886 | continue; |
887 | } | |
888 | mxser_getcfg(m, &hwconf); | |
8ea2c2ec JJ |
889 | /* init mxsercfg first, |
890 | * or mxsercfg data is not correct on ISR. | |
891 | */ | |
892 | /* mxser_initbrd will hook ISR. */ | |
1da177e4 LT |
893 | if (mxser_initbrd(m, &hwconf) < 0) |
894 | continue; | |
895 | m++; | |
896 | } | |
897 | } | |
898 | #endif | |
899 | ||
64698b69 KS |
900 | retval = tty_register_driver(mxvar_sdriver); |
901 | if (retval) { | |
8ea2c2ec JJ |
902 | printk(KERN_ERR "Couldn't install MOXA Smartio/Industio family" |
903 | " driver !\n"); | |
64698b69 | 904 | put_tty_driver(mxvar_sdriver); |
1da177e4 | 905 | |
1da177e4 LT |
906 | for (i = 0; i < MXSER_BOARDS; i++) { |
907 | if (mxsercfg[i].board_type == -1) | |
908 | continue; | |
909 | else { | |
910 | free_irq(mxsercfg[i].irq, &mxvar_table[i * MXSER_PORTS_PER_BOARD]); | |
8ea2c2ec | 911 | /* todo: release io, vector */ |
1da177e4 LT |
912 | } |
913 | } | |
64698b69 | 914 | return retval; |
1da177e4 LT |
915 | } |
916 | ||
64698b69 | 917 | return 0; |
1da177e4 LT |
918 | } |
919 | ||
920 | static void mxser_do_softint(void *private_) | |
921 | { | |
56e139f6 | 922 | struct mxser_struct *info = private_; |
1da177e4 LT |
923 | struct tty_struct *tty; |
924 | ||
925 | tty = info->tty; | |
926 | ||
927 | if (tty) { | |
928 | if (test_and_clear_bit(MXSER_EVENT_TXLOW, &info->event)) | |
929 | tty_wakeup(tty); | |
930 | if (test_and_clear_bit(MXSER_EVENT_HANGUP, &info->event)) | |
931 | tty_hangup(tty); | |
932 | } | |
933 | } | |
934 | ||
935 | static unsigned char mxser_get_msr(int baseaddr, int mode, int port, struct mxser_struct *info) | |
936 | { | |
937 | unsigned char status = 0; | |
938 | ||
939 | status = inb(baseaddr + UART_MSR); | |
940 | ||
941 | mxser_msr[port] &= 0x0F; | |
942 | mxser_msr[port] |= status; | |
943 | status = mxser_msr[port]; | |
944 | if (mode) | |
945 | mxser_msr[port] = 0; | |
946 | ||
947 | return status; | |
948 | } | |
949 | ||
950 | /* | |
951 | * This routine is called whenever a serial port is opened. It | |
952 | * enables interrupts for a serial port, linking in its async structure into | |
953 | * the IRQ chain. It also performs the serial-specific | |
954 | * initialization for the tty structure. | |
955 | */ | |
956 | static int mxser_open(struct tty_struct *tty, struct file *filp) | |
957 | { | |
958 | struct mxser_struct *info; | |
959 | int retval, line; | |
960 | ||
6f08b72c KS |
961 | /* initialize driver_data in case something fails */ |
962 | tty->driver_data = NULL; | |
963 | ||
1da177e4 LT |
964 | line = tty->index; |
965 | if (line == MXSER_PORTS) | |
966 | return 0; | |
967 | if (line < 0 || line > MXSER_PORTS) | |
968 | return -ENODEV; | |
969 | info = mxvar_table + line; | |
970 | if (!info->base) | |
8ea2c2ec | 971 | return -ENODEV; |
1da177e4 LT |
972 | |
973 | tty->driver_data = info; | |
974 | info->tty = tty; | |
975 | /* | |
976 | * Start up serial port | |
977 | */ | |
978 | retval = mxser_startup(info); | |
979 | if (retval) | |
8ea2c2ec | 980 | return retval; |
1da177e4 LT |
981 | |
982 | retval = mxser_block_til_ready(tty, filp, info); | |
983 | if (retval) | |
8ea2c2ec | 984 | return retval; |
1da177e4 LT |
985 | |
986 | info->count++; | |
987 | ||
988 | if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) { | |
989 | if (tty->driver->subtype == SERIAL_TYPE_NORMAL) | |
990 | *tty->termios = info->normal_termios; | |
991 | else | |
992 | *tty->termios = info->callout_termios; | |
993 | mxser_change_speed(info, NULL); | |
994 | } | |
995 | ||
996 | info->session = current->signal->session; | |
997 | info->pgrp = process_group(current); | |
1da177e4 | 998 | |
8ea2c2ec JJ |
999 | /* |
1000 | status = mxser_get_msr(info->base, 0, info->port); | |
1001 | mxser_check_modem_status(info, status); | |
1002 | */ | |
1da177e4 | 1003 | |
8ea2c2ec | 1004 | /* unmark here for very high baud rate (ex. 921600 bps) used */ |
1da177e4 LT |
1005 | tty->low_latency = 1; |
1006 | return 0; | |
1007 | } | |
1008 | ||
1009 | /* | |
1010 | * This routine is called when the serial port gets closed. First, we | |
1011 | * wait for the last remaining data to be sent. Then, we unlink its | |
1012 | * async structure from the interrupt chain if necessary, and we free | |
1013 | * that IRQ if nothing is left in the chain. | |
1014 | */ | |
1015 | static void mxser_close(struct tty_struct *tty, struct file *filp) | |
1016 | { | |
56e139f6 | 1017 | struct mxser_struct *info = tty->driver_data; |
1da177e4 LT |
1018 | |
1019 | unsigned long timeout; | |
1020 | unsigned long flags; | |
1021 | struct tty_ldisc *ld; | |
1022 | ||
1023 | if (tty->index == MXSER_PORTS) | |
1024 | return; | |
1025 | if (!info) | |
6f08b72c | 1026 | return; |
1da177e4 LT |
1027 | |
1028 | spin_lock_irqsave(&info->slock, flags); | |
1029 | ||
1030 | if (tty_hung_up_p(filp)) { | |
1031 | spin_unlock_irqrestore(&info->slock, flags); | |
1032 | return; | |
1033 | } | |
1034 | if ((tty->count == 1) && (info->count != 1)) { | |
1035 | /* | |
1036 | * Uh, oh. tty->count is 1, which means that the tty | |
1037 | * structure will be freed. Info->count should always | |
1038 | * be one in these conditions. If it's greater than | |
1039 | * one, we've got real problems, since it means the | |
1040 | * serial port won't be shutdown. | |
1041 | */ | |
8ea2c2ec JJ |
1042 | printk(KERN_ERR "mxser_close: bad serial port count; " |
1043 | "tty->count is 1, info->count is %d\n", info->count); | |
1da177e4 LT |
1044 | info->count = 1; |
1045 | } | |
1046 | if (--info->count < 0) { | |
8ea2c2ec JJ |
1047 | printk(KERN_ERR "mxser_close: bad serial port count for " |
1048 | "ttys%d: %d\n", info->port, info->count); | |
1da177e4 LT |
1049 | info->count = 0; |
1050 | } | |
1051 | if (info->count) { | |
1052 | spin_unlock_irqrestore(&info->slock, flags); | |
1053 | return; | |
1054 | } | |
1055 | info->flags |= ASYNC_CLOSING; | |
1056 | spin_unlock_irqrestore(&info->slock, flags); | |
1057 | /* | |
1058 | * Save the termios structure, since this port may have | |
1059 | * separate termios for callout and dialin. | |
1060 | */ | |
1061 | if (info->flags & ASYNC_NORMAL_ACTIVE) | |
1062 | info->normal_termios = *tty->termios; | |
1063 | /* | |
1064 | * Now we wait for the transmit buffer to clear; and we notify | |
1065 | * the line discipline to only process XON/XOFF characters. | |
1066 | */ | |
1067 | tty->closing = 1; | |
1068 | if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) | |
1069 | tty_wait_until_sent(tty, info->closing_wait); | |
1070 | /* | |
1071 | * At this point we stop accepting input. To do this, we | |
1072 | * disable the receive line status interrupts, and tell the | |
1073 | * interrupt driver to stop checking the data ready bit in the | |
1074 | * line status register. | |
1075 | */ | |
1076 | info->IER &= ~UART_IER_RLSI; | |
1077 | if (info->IsMoxaMustChipFlag) | |
1078 | info->IER &= ~MOXA_MUST_RECV_ISR; | |
1079 | /* by William | |
1080 | info->read_status_mask &= ~UART_LSR_DR; | |
1081 | */ | |
1082 | if (info->flags & ASYNC_INITIALIZED) { | |
1083 | outb(info->IER, info->base + UART_IER); | |
1084 | /* | |
1085 | * Before we drop DTR, make sure the UART transmitter | |
1086 | * has completely drained; this is especially | |
1087 | * important if there is a transmit FIFO! | |
1088 | */ | |
1089 | timeout = jiffies + HZ; | |
1090 | while (!(inb(info->base + UART_LSR) & UART_LSR_TEMT)) { | |
da4cd8df | 1091 | schedule_timeout_interruptible(5); |
1da177e4 LT |
1092 | if (time_after(jiffies, timeout)) |
1093 | break; | |
1094 | } | |
1095 | } | |
1096 | mxser_shutdown(info); | |
1097 | ||
1098 | if (tty->driver->flush_buffer) | |
1099 | tty->driver->flush_buffer(tty); | |
1100 | ||
1101 | ld = tty_ldisc_ref(tty); | |
1102 | if (ld) { | |
8ea2c2ec | 1103 | if (ld->flush_buffer) |
1da177e4 LT |
1104 | ld->flush_buffer(tty); |
1105 | tty_ldisc_deref(ld); | |
1106 | } | |
1107 | ||
1108 | tty->closing = 0; | |
1109 | info->event = 0; | |
1110 | info->tty = NULL; | |
1111 | if (info->blocked_open) { | |
da4cd8df NA |
1112 | if (info->close_delay) |
1113 | schedule_timeout_interruptible(info->close_delay); | |
1da177e4 LT |
1114 | wake_up_interruptible(&info->open_wait); |
1115 | } | |
1116 | ||
1117 | info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); | |
1118 | wake_up_interruptible(&info->close_wait); | |
1119 | ||
1120 | } | |
1121 | ||
1122 | static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count) | |
1123 | { | |
1124 | int c, total = 0; | |
56e139f6 | 1125 | struct mxser_struct *info = tty->driver_data; |
1da177e4 LT |
1126 | unsigned long flags; |
1127 | ||
8a7f7c93 | 1128 | if (!info->xmit_buf) |
8ea2c2ec | 1129 | return 0; |
1da177e4 LT |
1130 | |
1131 | while (1) { | |
8ea2c2ec JJ |
1132 | c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, |
1133 | SERIAL_XMIT_SIZE - info->xmit_head)); | |
1da177e4 LT |
1134 | if (c <= 0) |
1135 | break; | |
1136 | ||
1137 | memcpy(info->xmit_buf + info->xmit_head, buf, c); | |
1138 | spin_lock_irqsave(&info->slock, flags); | |
8ea2c2ec JJ |
1139 | info->xmit_head = (info->xmit_head + c) & |
1140 | (SERIAL_XMIT_SIZE - 1); | |
1da177e4 LT |
1141 | info->xmit_cnt += c; |
1142 | spin_unlock_irqrestore(&info->slock, flags); | |
1143 | ||
1144 | buf += c; | |
1145 | count -= c; | |
1146 | total += c; | |
1da177e4 LT |
1147 | } |
1148 | ||
1149 | if (info->xmit_cnt && !tty->stopped && !(info->IER & UART_IER_THRI)) { | |
8ea2c2ec JJ |
1150 | if (!tty->hw_stopped || |
1151 | (info->type == PORT_16550A) || | |
1152 | (info->IsMoxaMustChipFlag)) { | |
1da177e4 LT |
1153 | spin_lock_irqsave(&info->slock, flags); |
1154 | info->IER |= UART_IER_THRI; | |
1155 | outb(info->IER, info->base + UART_IER); | |
1156 | spin_unlock_irqrestore(&info->slock, flags); | |
1157 | } | |
1158 | } | |
1159 | return total; | |
1160 | } | |
1161 | ||
1162 | static void mxser_put_char(struct tty_struct *tty, unsigned char ch) | |
1163 | { | |
56e139f6 | 1164 | struct mxser_struct *info = tty->driver_data; |
1da177e4 LT |
1165 | unsigned long flags; |
1166 | ||
8a7f7c93 | 1167 | if (!info->xmit_buf) |
1da177e4 LT |
1168 | return; |
1169 | ||
1170 | if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1) | |
1171 | return; | |
1172 | ||
1173 | spin_lock_irqsave(&info->slock, flags); | |
1174 | info->xmit_buf[info->xmit_head++] = ch; | |
1175 | info->xmit_head &= SERIAL_XMIT_SIZE - 1; | |
1176 | info->xmit_cnt++; | |
1177 | spin_unlock_irqrestore(&info->slock, flags); | |
1178 | if (!tty->stopped && !(info->IER & UART_IER_THRI)) { | |
8ea2c2ec JJ |
1179 | if (!tty->hw_stopped || |
1180 | (info->type == PORT_16550A) || | |
1181 | info->IsMoxaMustChipFlag) { | |
1da177e4 LT |
1182 | spin_lock_irqsave(&info->slock, flags); |
1183 | info->IER |= UART_IER_THRI; | |
1184 | outb(info->IER, info->base + UART_IER); | |
1185 | spin_unlock_irqrestore(&info->slock, flags); | |
1186 | } | |
1187 | } | |
1188 | } | |
1189 | ||
1190 | ||
1191 | static void mxser_flush_chars(struct tty_struct *tty) | |
1192 | { | |
56e139f6 | 1193 | struct mxser_struct *info = tty->driver_data; |
1da177e4 LT |
1194 | unsigned long flags; |
1195 | ||
8ea2c2ec JJ |
1196 | if (info->xmit_cnt <= 0 || |
1197 | tty->stopped || | |
1198 | !info->xmit_buf || | |
1199 | (tty->hw_stopped && | |
1200 | (info->type != PORT_16550A) && | |
1201 | (!info->IsMoxaMustChipFlag) | |
1202 | )) | |
1da177e4 LT |
1203 | return; |
1204 | ||
1205 | spin_lock_irqsave(&info->slock, flags); | |
1206 | ||
1207 | info->IER |= UART_IER_THRI; | |
1208 | outb(info->IER, info->base + UART_IER); | |
1209 | ||
1210 | spin_unlock_irqrestore(&info->slock, flags); | |
1211 | } | |
1212 | ||
1213 | static int mxser_write_room(struct tty_struct *tty) | |
1214 | { | |
56e139f6 | 1215 | struct mxser_struct *info = tty->driver_data; |
1da177e4 LT |
1216 | int ret; |
1217 | ||
1218 | ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; | |
1219 | if (ret < 0) | |
1220 | ret = 0; | |
8ea2c2ec | 1221 | return ret; |
1da177e4 LT |
1222 | } |
1223 | ||
1224 | static int mxser_chars_in_buffer(struct tty_struct *tty) | |
1225 | { | |
56e139f6 | 1226 | struct mxser_struct *info = tty->driver_data; |
1da177e4 LT |
1227 | return info->xmit_cnt; |
1228 | } | |
1229 | ||
1230 | static void mxser_flush_buffer(struct tty_struct *tty) | |
1231 | { | |
56e139f6 | 1232 | struct mxser_struct *info = tty->driver_data; |
1da177e4 LT |
1233 | char fcr; |
1234 | unsigned long flags; | |
1235 | ||
1236 | ||
1237 | spin_lock_irqsave(&info->slock, flags); | |
1238 | info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; | |
1239 | ||
1240 | /* below added by shinhay */ | |
1241 | fcr = inb(info->base + UART_FCR); | |
8ea2c2ec JJ |
1242 | outb((fcr | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), |
1243 | info->base + UART_FCR); | |
1da177e4 LT |
1244 | outb(fcr, info->base + UART_FCR); |
1245 | ||
1246 | spin_unlock_irqrestore(&info->slock, flags); | |
1247 | /* above added by shinhay */ | |
1248 | ||
1249 | wake_up_interruptible(&tty->write_wait); | |
1250 | if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && tty->ldisc.write_wakeup) | |
1251 | (tty->ldisc.write_wakeup) (tty); | |
1252 | } | |
1253 | ||
1254 | static int mxser_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) | |
1255 | { | |
56e139f6 | 1256 | struct mxser_struct *info = tty->driver_data; |
1da177e4 LT |
1257 | int retval; |
1258 | struct async_icount cprev, cnow; /* kernel counter temps */ | |
1259 | struct serial_icounter_struct __user *p_cuser; | |
1260 | unsigned long templ; | |
1261 | unsigned long flags; | |
1262 | void __user *argp = (void __user *)arg; | |
1263 | ||
1264 | if (tty->index == MXSER_PORTS) | |
8ea2c2ec | 1265 | return mxser_ioctl_special(cmd, argp); |
1da177e4 | 1266 | |
8ea2c2ec | 1267 | /* following add by Victor Yu. 01-05-2004 */ |
1da177e4 LT |
1268 | if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) { |
1269 | int opmode, p; | |
1270 | static unsigned char ModeMask[] = { 0xfc, 0xf3, 0xcf, 0x3f }; | |
1271 | int shiftbit; | |
1272 | unsigned char val, mask; | |
1273 | ||
1274 | p = info->port % 4; | |
1275 | if (cmd == MOXA_SET_OP_MODE) { | |
1276 | if (get_user(opmode, (int __user *) argp)) | |
1277 | return -EFAULT; | |
8ea2c2ec JJ |
1278 | if (opmode != RS232_MODE && |
1279 | opmode != RS485_2WIRE_MODE && | |
1280 | opmode != RS422_MODE && | |
1281 | opmode != RS485_4WIRE_MODE) | |
1da177e4 LT |
1282 | return -EFAULT; |
1283 | mask = ModeMask[p]; | |
1284 | shiftbit = p * 2; | |
1285 | val = inb(info->opmode_ioaddr); | |
1286 | val &= mask; | |
1287 | val |= (opmode << shiftbit); | |
1288 | outb(val, info->opmode_ioaddr); | |
1289 | } else { | |
1290 | shiftbit = p * 2; | |
1291 | opmode = inb(info->opmode_ioaddr) >> shiftbit; | |
1292 | opmode &= OP_MODE_MASK; | |
1293 | if (copy_to_user(argp, &opmode, sizeof(int))) | |
1294 | return -EFAULT; | |
1295 | } | |
1296 | return 0; | |
1297 | } | |
8ea2c2ec | 1298 | /* above add by Victor Yu. 01-05-2004 */ |
1da177e4 LT |
1299 | |
1300 | if ((cmd != TIOCGSERIAL) && (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { | |
1301 | if (tty->flags & (1 << TTY_IO_ERROR)) | |
8ea2c2ec | 1302 | return -EIO; |
1da177e4 LT |
1303 | } |
1304 | switch (cmd) { | |
1305 | case TCSBRK: /* SVID version: non-zero arg --> no break */ | |
1306 | retval = tty_check_change(tty); | |
1307 | if (retval) | |
8ea2c2ec | 1308 | return retval; |
1da177e4 LT |
1309 | tty_wait_until_sent(tty, 0); |
1310 | if (!arg) | |
1311 | mxser_send_break(info, HZ / 4); /* 1/4 second */ | |
8ea2c2ec | 1312 | return 0; |
1da177e4 LT |
1313 | case TCSBRKP: /* support for POSIX tcsendbreak() */ |
1314 | retval = tty_check_change(tty); | |
1315 | if (retval) | |
8ea2c2ec | 1316 | return retval; |
1da177e4 LT |
1317 | tty_wait_until_sent(tty, 0); |
1318 | mxser_send_break(info, arg ? arg * (HZ / 10) : HZ / 4); | |
8ea2c2ec | 1319 | return 0; |
1da177e4 | 1320 | case TIOCGSOFTCAR: |
8ea2c2ec | 1321 | return put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *)argp); |
1da177e4 LT |
1322 | case TIOCSSOFTCAR: |
1323 | if (get_user(templ, (unsigned long __user *) argp)) | |
1324 | return -EFAULT; | |
1325 | arg = templ; | |
1326 | tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0)); | |
8ea2c2ec | 1327 | return 0; |
1da177e4 LT |
1328 | case TIOCGSERIAL: |
1329 | return mxser_get_serial_info(info, argp); | |
1330 | case TIOCSSERIAL: | |
1331 | return mxser_set_serial_info(info, argp); | |
1332 | case TIOCSERGETLSR: /* Get line status register */ | |
1333 | return mxser_get_lsr_info(info, argp); | |
1334 | /* | |
1335 | * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change | |
1336 | * - mask passed in arg for lines of interest | |
1337 | * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) | |
1338 | * Caller should use TIOCGICOUNT to see which one it was | |
1339 | */ | |
8ea2c2ec | 1340 | case TIOCMIWAIT: { |
1da177e4 LT |
1341 | DECLARE_WAITQUEUE(wait, current); |
1342 | int ret; | |
1343 | spin_lock_irqsave(&info->slock, flags); | |
1344 | cprev = info->icount; /* note the counters on entry */ | |
1345 | spin_unlock_irqrestore(&info->slock, flags); | |
1346 | ||
1347 | add_wait_queue(&info->delta_msr_wait, &wait); | |
1348 | while (1) { | |
1349 | spin_lock_irqsave(&info->slock, flags); | |
1350 | cnow = info->icount; /* atomic copy */ | |
1351 | spin_unlock_irqrestore(&info->slock, flags); | |
1352 | ||
1353 | set_current_state(TASK_INTERRUPTIBLE); | |
8ea2c2ec JJ |
1354 | if (((arg & TIOCM_RNG) && |
1355 | (cnow.rng != cprev.rng)) || | |
1356 | ((arg & TIOCM_DSR) && | |
1357 | (cnow.dsr != cprev.dsr)) || | |
1358 | ((arg & TIOCM_CD) && | |
1359 | (cnow.dcd != cprev.dcd)) || | |
1360 | ((arg & TIOCM_CTS) && | |
1361 | (cnow.cts != cprev.cts))) { | |
1da177e4 LT |
1362 | ret = 0; |
1363 | break; | |
1364 | } | |
1365 | /* see if a signal did it */ | |
1366 | if (signal_pending(current)) { | |
1367 | ret = -ERESTARTSYS; | |
1368 | break; | |
1369 | } | |
1370 | cprev = cnow; | |
1371 | } | |
1372 | current->state = TASK_RUNNING; | |
1373 | remove_wait_queue(&info->delta_msr_wait, &wait); | |
1374 | break; | |
1375 | } | |
1376 | /* NOTREACHED */ | |
1377 | /* | |
1378 | * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) | |
1379 | * Return: write counters to the user passed counter struct | |
1380 | * NB: both 1->0 and 0->1 transitions are counted except for | |
1381 | * RI where only 0->1 is counted. | |
1382 | */ | |
1383 | case TIOCGICOUNT: | |
1384 | spin_lock_irqsave(&info->slock, flags); | |
1385 | cnow = info->icount; | |
1386 | spin_unlock_irqrestore(&info->slock, flags); | |
1387 | p_cuser = argp; | |
1388 | /* modified by casper 1/11/2000 */ | |
1389 | if (put_user(cnow.frame, &p_cuser->frame)) | |
1390 | return -EFAULT; | |
1391 | if (put_user(cnow.brk, &p_cuser->brk)) | |
1392 | return -EFAULT; | |
1393 | if (put_user(cnow.overrun, &p_cuser->overrun)) | |
1394 | return -EFAULT; | |
1395 | if (put_user(cnow.buf_overrun, &p_cuser->buf_overrun)) | |
1396 | return -EFAULT; | |
1397 | if (put_user(cnow.parity, &p_cuser->parity)) | |
1398 | return -EFAULT; | |
1399 | if (put_user(cnow.rx, &p_cuser->rx)) | |
1400 | return -EFAULT; | |
1401 | if (put_user(cnow.tx, &p_cuser->tx)) | |
1402 | return -EFAULT; | |
1403 | put_user(cnow.cts, &p_cuser->cts); | |
1404 | put_user(cnow.dsr, &p_cuser->dsr); | |
1405 | put_user(cnow.rng, &p_cuser->rng); | |
1406 | put_user(cnow.dcd, &p_cuser->dcd); | |
1da177e4 LT |
1407 | return 0; |
1408 | case MOXA_HighSpeedOn: | |
8ea2c2ec JJ |
1409 | return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp); |
1410 | case MOXA_SDS_RSTICOUNTER: { | |
1da177e4 LT |
1411 | info->mon_data.rxcnt = 0; |
1412 | info->mon_data.txcnt = 0; | |
1413 | return 0; | |
1414 | } | |
8ea2c2ec | 1415 | /* (above) added by James. */ |
1da177e4 LT |
1416 | case MOXA_ASPP_SETBAUD:{ |
1417 | long baud; | |
8ea2c2ec | 1418 | if (get_user(baud, (long __user *)argp)) |
1da177e4 LT |
1419 | return -EFAULT; |
1420 | mxser_set_baud(info, baud); | |
1421 | return 0; | |
1422 | } | |
1423 | case MOXA_ASPP_GETBAUD: | |
1424 | if (copy_to_user(argp, &info->realbaud, sizeof(long))) | |
1425 | return -EFAULT; | |
1426 | ||
1427 | return 0; | |
1428 | ||
1429 | case MOXA_ASPP_OQUEUE:{ | |
1430 | int len, lsr; | |
1431 | ||
1432 | len = mxser_chars_in_buffer(tty); | |
1433 | ||
1434 | lsr = inb(info->base + UART_LSR) & UART_LSR_TEMT; | |
1435 | ||
1436 | len += (lsr ? 0 : 1); | |
1437 | ||
1438 | if (copy_to_user(argp, &len, sizeof(int))) | |
1439 | return -EFAULT; | |
1440 | ||
1441 | return 0; | |
1442 | } | |
8ea2c2ec | 1443 | case MOXA_ASPP_MON: { |
1da177e4 | 1444 | int mcr, status; |
8ea2c2ec JJ |
1445 | |
1446 | /* info->mon_data.ser_param = tty->termios->c_cflag; */ | |
1da177e4 LT |
1447 | |
1448 | status = mxser_get_msr(info->base, 1, info->port, info); | |
1449 | mxser_check_modem_status(info, status); | |
1450 | ||
1451 | mcr = inb(info->base + UART_MCR); | |
1452 | if (mcr & MOXA_MUST_MCR_XON_FLAG) | |
1453 | info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFHOLD; | |
1454 | else | |
1455 | info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFHOLD; | |
1456 | ||
1457 | if (mcr & MOXA_MUST_MCR_TX_XON) | |
1458 | info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFXENT; | |
1459 | else | |
1460 | info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFXENT; | |
1461 | ||
1462 | if (info->tty->hw_stopped) | |
1463 | info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD; | |
1464 | else | |
1465 | info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD; | |
1466 | ||
8ea2c2ec JJ |
1467 | if (copy_to_user(argp, &info->mon_data, |
1468 | sizeof(struct mxser_mon))) | |
1da177e4 LT |
1469 | return -EFAULT; |
1470 | ||
1471 | return 0; | |
1da177e4 LT |
1472 | } |
1473 | ||
8ea2c2ec JJ |
1474 | case MOXA_ASPP_LSTATUS: { |
1475 | if (copy_to_user(argp, &info->err_shadow, | |
1476 | sizeof(unsigned char))) | |
1da177e4 LT |
1477 | return -EFAULT; |
1478 | ||
1479 | info->err_shadow = 0; | |
1480 | return 0; | |
1da177e4 | 1481 | } |
8ea2c2ec | 1482 | case MOXA_SET_BAUD_METHOD: { |
1da177e4 | 1483 | int method; |
8ea2c2ec JJ |
1484 | |
1485 | if (get_user(method, (int __user *)argp)) | |
1da177e4 LT |
1486 | return -EFAULT; |
1487 | mxser_set_baud_method[info->port] = method; | |
1488 | if (copy_to_user(argp, &method, sizeof(int))) | |
1489 | return -EFAULT; | |
1490 | ||
1491 | return 0; | |
1492 | } | |
1493 | default: | |
1494 | return -ENOIOCTLCMD; | |
1495 | } | |
1496 | return 0; | |
1497 | } | |
1498 | ||
1499 | #ifndef CMSPAR | |
1500 | #define CMSPAR 010000000000 | |
1501 | #endif | |
1502 | ||
1503 | static int mxser_ioctl_special(unsigned int cmd, void __user *argp) | |
1504 | { | |
1505 | int i, result, status; | |
1506 | ||
1507 | switch (cmd) { | |
1508 | case MOXA_GET_CONF: | |
8ea2c2ec JJ |
1509 | if (copy_to_user(argp, mxsercfg, |
1510 | sizeof(struct mxser_hwconf) * 4)) | |
1da177e4 LT |
1511 | return -EFAULT; |
1512 | return 0; | |
1513 | case MOXA_GET_MAJOR: | |
1514 | if (copy_to_user(argp, &ttymajor, sizeof(int))) | |
1515 | return -EFAULT; | |
1516 | return 0; | |
1517 | ||
1518 | case MOXA_GET_CUMAJOR: | |
1519 | if (copy_to_user(argp, &calloutmajor, sizeof(int))) | |
1520 | return -EFAULT; | |
1521 | return 0; | |
1522 | ||
1523 | case MOXA_CHKPORTENABLE: | |
1524 | result = 0; | |
1525 | for (i = 0; i < MXSER_PORTS; i++) { | |
1526 | if (mxvar_table[i].base) | |
1527 | result |= (1 << i); | |
1528 | } | |
8ea2c2ec | 1529 | return put_user(result, (unsigned long __user *)argp); |
1da177e4 LT |
1530 | case MOXA_GETDATACOUNT: |
1531 | if (copy_to_user(argp, &mxvar_log, sizeof(mxvar_log))) | |
1532 | return -EFAULT; | |
8ea2c2ec | 1533 | return 0; |
1da177e4 LT |
1534 | case MOXA_GETMSTATUS: |
1535 | for (i = 0; i < MXSER_PORTS; i++) { | |
1536 | GMStatus[i].ri = 0; | |
1537 | if (!mxvar_table[i].base) { | |
1538 | GMStatus[i].dcd = 0; | |
1539 | GMStatus[i].dsr = 0; | |
1540 | GMStatus[i].cts = 0; | |
1541 | continue; | |
1542 | } | |
1543 | ||
1544 | if (!mxvar_table[i].tty || !mxvar_table[i].tty->termios) | |
1545 | GMStatus[i].cflag = mxvar_table[i].normal_termios.c_cflag; | |
1546 | else | |
1547 | GMStatus[i].cflag = mxvar_table[i].tty->termios->c_cflag; | |
1548 | ||
1549 | status = inb(mxvar_table[i].base + UART_MSR); | |
1550 | if (status & 0x80 /*UART_MSR_DCD */ ) | |
1551 | GMStatus[i].dcd = 1; | |
1552 | else | |
1553 | GMStatus[i].dcd = 0; | |
1554 | ||
1555 | if (status & 0x20 /*UART_MSR_DSR */ ) | |
1556 | GMStatus[i].dsr = 1; | |
1557 | else | |
1558 | GMStatus[i].dsr = 0; | |
1559 | ||
1560 | ||
1561 | if (status & 0x10 /*UART_MSR_CTS */ ) | |
1562 | GMStatus[i].cts = 1; | |
1563 | else | |
1564 | GMStatus[i].cts = 0; | |
1565 | } | |
8ea2c2ec JJ |
1566 | if (copy_to_user(argp, GMStatus, |
1567 | sizeof(struct mxser_mstatus) * MXSER_PORTS)) | |
1da177e4 LT |
1568 | return -EFAULT; |
1569 | return 0; | |
8ea2c2ec | 1570 | case MOXA_ASPP_MON_EXT: { |
1da177e4 LT |
1571 | int status; |
1572 | int opmode, p; | |
1573 | int shiftbit; | |
1574 | unsigned cflag, iflag; | |
1575 | ||
1576 | for (i = 0; i < MXSER_PORTS; i++) { | |
1da177e4 LT |
1577 | if (!mxvar_table[i].base) |
1578 | continue; | |
1579 | ||
8ea2c2ec JJ |
1580 | status = mxser_get_msr(mxvar_table[i].base, 0, |
1581 | i, &(mxvar_table[i])); | |
1582 | /* | |
1583 | mxser_check_modem_status(&mxvar_table[i], | |
1584 | status); | |
1585 | */ | |
1da177e4 LT |
1586 | if (status & UART_MSR_TERI) |
1587 | mxvar_table[i].icount.rng++; | |
1588 | if (status & UART_MSR_DDSR) | |
1589 | mxvar_table[i].icount.dsr++; | |
1590 | if (status & UART_MSR_DDCD) | |
1591 | mxvar_table[i].icount.dcd++; | |
1592 | if (status & UART_MSR_DCTS) | |
1593 | mxvar_table[i].icount.cts++; | |
1594 | ||
1595 | mxvar_table[i].mon_data.modem_status = status; | |
1596 | mon_data_ext.rx_cnt[i] = mxvar_table[i].mon_data.rxcnt; | |
1597 | mon_data_ext.tx_cnt[i] = mxvar_table[i].mon_data.txcnt; | |
1598 | mon_data_ext.up_rxcnt[i] = mxvar_table[i].mon_data.up_rxcnt; | |
1599 | mon_data_ext.up_txcnt[i] = mxvar_table[i].mon_data.up_txcnt; | |
1600 | mon_data_ext.modem_status[i] = mxvar_table[i].mon_data.modem_status; | |
1601 | mon_data_ext.baudrate[i] = mxvar_table[i].realbaud; | |
1602 | ||
1603 | if (!mxvar_table[i].tty || !mxvar_table[i].tty->termios) { | |
1604 | cflag = mxvar_table[i].normal_termios.c_cflag; | |
1605 | iflag = mxvar_table[i].normal_termios.c_iflag; | |
1606 | } else { | |
1607 | cflag = mxvar_table[i].tty->termios->c_cflag; | |
1608 | iflag = mxvar_table[i].tty->termios->c_iflag; | |
1609 | } | |
1610 | ||
1611 | mon_data_ext.databits[i] = cflag & CSIZE; | |
1612 | ||
1613 | mon_data_ext.stopbits[i] = cflag & CSTOPB; | |
1614 | ||
1615 | mon_data_ext.parity[i] = cflag & (PARENB | PARODD | CMSPAR); | |
1616 | ||
1617 | mon_data_ext.flowctrl[i] = 0x00; | |
1618 | ||
1619 | if (cflag & CRTSCTS) | |
1620 | mon_data_ext.flowctrl[i] |= 0x03; | |
1621 | ||
1622 | if (iflag & (IXON | IXOFF)) | |
1623 | mon_data_ext.flowctrl[i] |= 0x0C; | |
1624 | ||
1625 | if (mxvar_table[i].type == PORT_16550A) | |
1626 | mon_data_ext.fifo[i] = 1; | |
1627 | else | |
1628 | mon_data_ext.fifo[i] = 0; | |
1629 | ||
1630 | p = i % 4; | |
1631 | shiftbit = p * 2; | |
1632 | opmode = inb(mxvar_table[i].opmode_ioaddr) >> shiftbit; | |
1633 | opmode &= OP_MODE_MASK; | |
1634 | ||
1635 | mon_data_ext.iftype[i] = opmode; | |
1636 | ||
1637 | } | |
1638 | if (copy_to_user(argp, &mon_data_ext, sizeof(struct mxser_mon_ext))) | |
1639 | return -EFAULT; | |
1640 | ||
1641 | return 0; | |
1642 | ||
1643 | } | |
1644 | default: | |
1645 | return -ENOIOCTLCMD; | |
1646 | } | |
1647 | return 0; | |
1648 | } | |
1649 | ||
1da177e4 LT |
1650 | static void mxser_stoprx(struct tty_struct *tty) |
1651 | { | |
56e139f6 | 1652 | struct mxser_struct *info = tty->driver_data; |
8ea2c2ec | 1653 | /* unsigned long flags; */ |
1da177e4 LT |
1654 | |
1655 | info->ldisc_stop_rx = 1; | |
1656 | if (I_IXOFF(tty)) { | |
8ea2c2ec JJ |
1657 | /* MX_LOCK(&info->slock); */ |
1658 | /* following add by Victor Yu. 09-02-2002 */ | |
1da177e4 LT |
1659 | if (info->IsMoxaMustChipFlag) { |
1660 | info->IER &= ~MOXA_MUST_RECV_ISR; | |
1661 | outb(info->IER, info->base + UART_IER); | |
1662 | } else { | |
8ea2c2ec | 1663 | /* above add by Victor Yu. 09-02-2002 */ |
1da177e4 | 1664 | info->x_char = STOP_CHAR(tty); |
8ea2c2ec JJ |
1665 | /* mask by Victor Yu. 09-02-2002 */ |
1666 | /* outb(info->IER, 0); */ | |
1da177e4 LT |
1667 | outb(0, info->base + UART_IER); |
1668 | info->IER |= UART_IER_THRI; | |
8ea2c2ec JJ |
1669 | /* force Tx interrupt */ |
1670 | outb(info->IER, info->base + UART_IER); | |
1671 | } /* add by Victor Yu. 09-02-2002 */ | |
1672 | /* MX_UNLOCK(&info->slock); */ | |
1da177e4 LT |
1673 | } |
1674 | ||
1675 | if (info->tty->termios->c_cflag & CRTSCTS) { | |
8ea2c2ec | 1676 | /* MX_LOCK(&info->slock); */ |
1da177e4 LT |
1677 | info->MCR &= ~UART_MCR_RTS; |
1678 | outb(info->MCR, info->base + UART_MCR); | |
8ea2c2ec | 1679 | /* MX_UNLOCK(&info->slock); */ |
1da177e4 LT |
1680 | } |
1681 | } | |
1682 | ||
1683 | static void mxser_startrx(struct tty_struct *tty) | |
1684 | { | |
56e139f6 | 1685 | struct mxser_struct *info = tty->driver_data; |
8ea2c2ec | 1686 | /* unsigned long flags; */ |
1da177e4 LT |
1687 | |
1688 | info->ldisc_stop_rx = 0; | |
1689 | if (I_IXOFF(tty)) { | |
1690 | if (info->x_char) | |
1691 | info->x_char = 0; | |
1692 | else { | |
8ea2c2ec | 1693 | /* MX_LOCK(&info->slock); */ |
1da177e4 | 1694 | |
8ea2c2ec | 1695 | /* following add by Victor Yu. 09-02-2002 */ |
1da177e4 LT |
1696 | if (info->IsMoxaMustChipFlag) { |
1697 | info->IER |= MOXA_MUST_RECV_ISR; | |
1698 | outb(info->IER, info->base + UART_IER); | |
1699 | } else { | |
8ea2c2ec | 1700 | /* above add by Victor Yu. 09-02-2002 */ |
1da177e4 LT |
1701 | |
1702 | info->x_char = START_CHAR(tty); | |
8ea2c2ec JJ |
1703 | /* mask by Victor Yu. 09-02-2002 */ |
1704 | /* outb(info->IER, 0); */ | |
1705 | /* add by Victor Yu. 09-02-2002 */ | |
1706 | outb(0, info->base + UART_IER); | |
1707 | /* force Tx interrupt */ | |
1708 | info->IER |= UART_IER_THRI; | |
1da177e4 | 1709 | outb(info->IER, info->base + UART_IER); |
8ea2c2ec JJ |
1710 | } /* add by Victor Yu. 09-02-2002 */ |
1711 | /* MX_UNLOCK(&info->slock); */ | |
1da177e4 LT |
1712 | } |
1713 | } | |
1714 | ||
1715 | if (info->tty->termios->c_cflag & CRTSCTS) { | |
8ea2c2ec | 1716 | /* MX_LOCK(&info->slock); */ |
1da177e4 LT |
1717 | info->MCR |= UART_MCR_RTS; |
1718 | outb(info->MCR, info->base + UART_MCR); | |
8ea2c2ec | 1719 | /* MX_UNLOCK(&info->slock); */ |
1da177e4 LT |
1720 | } |
1721 | } | |
1722 | ||
1723 | /* | |
1724 | * This routine is called by the upper-layer tty layer to signal that | |
1725 | * incoming characters should be throttled. | |
1726 | */ | |
1727 | static void mxser_throttle(struct tty_struct *tty) | |
1728 | { | |
8ea2c2ec JJ |
1729 | /* struct mxser_struct *info = tty->driver_data; */ |
1730 | /* unsigned long flags; */ | |
1731 | ||
1732 | /* MX_LOCK(&info->slock); */ | |
1da177e4 | 1733 | mxser_stoprx(tty); |
8ea2c2ec | 1734 | /* MX_UNLOCK(&info->slock); */ |
1da177e4 LT |
1735 | } |
1736 | ||
1737 | static void mxser_unthrottle(struct tty_struct *tty) | |
1738 | { | |
8ea2c2ec JJ |
1739 | /* struct mxser_struct *info = tty->driver_data; */ |
1740 | /* unsigned long flags; */ | |
1741 | ||
1742 | /* MX_LOCK(&info->slock); */ | |
1da177e4 | 1743 | mxser_startrx(tty); |
8ea2c2ec | 1744 | /* MX_UNLOCK(&info->slock); */ |
1da177e4 LT |
1745 | } |
1746 | ||
1747 | static void mxser_set_termios(struct tty_struct *tty, struct termios *old_termios) | |
1748 | { | |
56e139f6 | 1749 | struct mxser_struct *info = tty->driver_data; |
1da177e4 LT |
1750 | unsigned long flags; |
1751 | ||
8ea2c2ec JJ |
1752 | if ((tty->termios->c_cflag != old_termios->c_cflag) || |
1753 | (RELEVANT_IFLAG(tty->termios->c_iflag) != RELEVANT_IFLAG(old_termios->c_iflag))) { | |
1da177e4 LT |
1754 | |
1755 | mxser_change_speed(info, old_termios); | |
1756 | ||
8ea2c2ec JJ |
1757 | if ((old_termios->c_cflag & CRTSCTS) && |
1758 | !(tty->termios->c_cflag & CRTSCTS)) { | |
1da177e4 LT |
1759 | tty->hw_stopped = 0; |
1760 | mxser_start(tty); | |
1761 | } | |
1762 | } | |
1763 | ||
1764 | /* Handle sw stopped */ | |
8ea2c2ec JJ |
1765 | if ((old_termios->c_iflag & IXON) && |
1766 | !(tty->termios->c_iflag & IXON)) { | |
1da177e4 LT |
1767 | tty->stopped = 0; |
1768 | ||
8ea2c2ec | 1769 | /* following add by Victor Yu. 09-02-2002 */ |
1da177e4 LT |
1770 | if (info->IsMoxaMustChipFlag) { |
1771 | spin_lock_irqsave(&info->slock, flags); | |
1772 | DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->base); | |
1773 | spin_unlock_irqrestore(&info->slock, flags); | |
1774 | } | |
8ea2c2ec | 1775 | /* above add by Victor Yu. 09-02-2002 */ |
1da177e4 LT |
1776 | |
1777 | mxser_start(tty); | |
1778 | } | |
1779 | } | |
1780 | ||
1781 | /* | |
1782 | * mxser_stop() and mxser_start() | |
1783 | * | |
1784 | * This routines are called before setting or resetting tty->stopped. | |
1785 | * They enable or disable transmitter interrupts, as necessary. | |
1786 | */ | |
1787 | static void mxser_stop(struct tty_struct *tty) | |
1788 | { | |
56e139f6 | 1789 | struct mxser_struct *info = tty->driver_data; |
1da177e4 LT |
1790 | unsigned long flags; |
1791 | ||
1792 | spin_lock_irqsave(&info->slock, flags); | |
1793 | if (info->IER & UART_IER_THRI) { | |
1794 | info->IER &= ~UART_IER_THRI; | |
1795 | outb(info->IER, info->base + UART_IER); | |
1796 | } | |
1797 | spin_unlock_irqrestore(&info->slock, flags); | |
1798 | } | |
1799 | ||
1800 | static void mxser_start(struct tty_struct *tty) | |
1801 | { | |
56e139f6 | 1802 | struct mxser_struct *info = tty->driver_data; |
1da177e4 LT |
1803 | unsigned long flags; |
1804 | ||
1805 | spin_lock_irqsave(&info->slock, flags); | |
1806 | if (info->xmit_cnt && info->xmit_buf && !(info->IER & UART_IER_THRI)) { | |
1807 | info->IER |= UART_IER_THRI; | |
1808 | outb(info->IER, info->base + UART_IER); | |
1809 | } | |
1810 | spin_unlock_irqrestore(&info->slock, flags); | |
1811 | } | |
1812 | ||
1813 | /* | |
1814 | * mxser_wait_until_sent() --- wait until the transmitter is empty | |
1815 | */ | |
1816 | static void mxser_wait_until_sent(struct tty_struct *tty, int timeout) | |
1817 | { | |
56e139f6 | 1818 | struct mxser_struct *info = tty->driver_data; |
1da177e4 LT |
1819 | unsigned long orig_jiffies, char_time; |
1820 | int lsr; | |
1821 | ||
1822 | if (info->type == PORT_UNKNOWN) | |
1823 | return; | |
1824 | ||
1825 | if (info->xmit_fifo_size == 0) | |
1826 | return; /* Just in case.... */ | |
1827 | ||
1828 | orig_jiffies = jiffies; | |
1829 | /* | |
1830 | * Set the check interval to be 1/5 of the estimated time to | |
1831 | * send a single character, and make it at least 1. The check | |
1832 | * interval should also be less than the timeout. | |
1833 | * | |
1834 | * Note: we have to use pretty tight timings here to satisfy | |
1835 | * the NIST-PCTS. | |
1836 | */ | |
1837 | char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size; | |
1838 | char_time = char_time / 5; | |
1839 | if (char_time == 0) | |
1840 | char_time = 1; | |
1841 | if (timeout && timeout < char_time) | |
1842 | char_time = timeout; | |
1843 | /* | |
1844 | * If the transmitter hasn't cleared in twice the approximate | |
1845 | * amount of time to send the entire FIFO, it probably won't | |
1846 | * ever clear. This assumes the UART isn't doing flow | |
1847 | * control, which is currently the case. Hence, if it ever | |
1848 | * takes longer than info->timeout, this is probably due to a | |
1849 | * UART bug of some kind. So, we clamp the timeout parameter at | |
1850 | * 2*info->timeout. | |
1851 | */ | |
1852 | if (!timeout || timeout > 2 * info->timeout) | |
1853 | timeout = 2 * info->timeout; | |
1854 | #ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT | |
8ea2c2ec JJ |
1855 | printk(KERN_DEBUG "In rs_wait_until_sent(%d) check=%lu...", |
1856 | timeout, char_time); | |
1da177e4 LT |
1857 | printk("jiff=%lu...", jiffies); |
1858 | #endif | |
1859 | while (!((lsr = inb(info->base + UART_LSR)) & UART_LSR_TEMT)) { | |
1860 | #ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT | |
1861 | printk("lsr = %d (jiff=%lu)...", lsr, jiffies); | |
1862 | #endif | |
da4cd8df | 1863 | schedule_timeout_interruptible(char_time); |
1da177e4 LT |
1864 | if (signal_pending(current)) |
1865 | break; | |
1866 | if (timeout && time_after(jiffies, orig_jiffies + timeout)) | |
1867 | break; | |
1868 | } | |
1869 | set_current_state(TASK_RUNNING); | |
1870 | ||
1871 | #ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT | |
1872 | printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies); | |
1873 | #endif | |
1874 | } | |
1875 | ||
1876 | ||
1877 | /* | |
1878 | * This routine is called by tty_hangup() when a hangup is signaled. | |
1879 | */ | |
1880 | void mxser_hangup(struct tty_struct *tty) | |
1881 | { | |
56e139f6 | 1882 | struct mxser_struct *info = tty->driver_data; |
1da177e4 LT |
1883 | |
1884 | mxser_flush_buffer(tty); | |
1885 | mxser_shutdown(info); | |
1886 | info->event = 0; | |
1887 | info->count = 0; | |
1888 | info->flags &= ~ASYNC_NORMAL_ACTIVE; | |
1889 | info->tty = NULL; | |
1890 | wake_up_interruptible(&info->open_wait); | |
1891 | } | |
1892 | ||
1893 | ||
8ea2c2ec | 1894 | /* added by James 03-12-2004. */ |
1da177e4 LT |
1895 | /* |
1896 | * mxser_rs_break() --- routine which turns the break handling on or off | |
1897 | */ | |
1898 | static void mxser_rs_break(struct tty_struct *tty, int break_state) | |
1899 | { | |
56e139f6 | 1900 | struct mxser_struct *info = tty->driver_data; |
1da177e4 LT |
1901 | unsigned long flags; |
1902 | ||
1903 | spin_lock_irqsave(&info->slock, flags); | |
1904 | if (break_state == -1) | |
8ea2c2ec JJ |
1905 | outb(inb(info->base + UART_LCR) | UART_LCR_SBC, |
1906 | info->base + UART_LCR); | |
1da177e4 | 1907 | else |
8ea2c2ec JJ |
1908 | outb(inb(info->base + UART_LCR) & ~UART_LCR_SBC, |
1909 | info->base + UART_LCR); | |
1da177e4 LT |
1910 | spin_unlock_irqrestore(&info->slock, flags); |
1911 | } | |
1912 | ||
8ea2c2ec | 1913 | /* (above) added by James. */ |
1da177e4 LT |
1914 | |
1915 | ||
1916 | /* | |
1917 | * This is the serial driver's generic interrupt routine | |
1918 | */ | |
1919 | static irqreturn_t mxser_interrupt(int irq, void *dev_id, struct pt_regs *regs) | |
1920 | { | |
1921 | int status, iir, i; | |
1922 | struct mxser_struct *info; | |
1923 | struct mxser_struct *port; | |
1924 | int max, irqbits, bits, msr; | |
1925 | int pass_counter = 0; | |
1926 | int handled = IRQ_NONE; | |
1927 | ||
1928 | port = NULL; | |
8ea2c2ec | 1929 | /* spin_lock(&gm_lock); */ |
1da177e4 LT |
1930 | |
1931 | for (i = 0; i < MXSER_BOARDS; i++) { | |
1932 | if (dev_id == &(mxvar_table[i * MXSER_PORTS_PER_BOARD])) { | |
1933 | port = dev_id; | |
1934 | break; | |
1935 | } | |
1936 | } | |
1937 | ||
8ea2c2ec | 1938 | if (i == MXSER_BOARDS) |
1da177e4 | 1939 | goto irq_stop; |
8ea2c2ec | 1940 | if (port == 0) |
1da177e4 | 1941 | goto irq_stop; |
1da177e4 LT |
1942 | max = mxser_numports[mxsercfg[i].board_type - 1]; |
1943 | while (1) { | |
1944 | irqbits = inb(port->vector) & port->vectormask; | |
8ea2c2ec | 1945 | if (irqbits == port->vectormask) |
1da177e4 | 1946 | break; |
1da177e4 LT |
1947 | |
1948 | handled = IRQ_HANDLED; | |
1949 | for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) { | |
8ea2c2ec | 1950 | if (irqbits == port->vectormask) |
1da177e4 | 1951 | break; |
1da177e4 LT |
1952 | if (bits & irqbits) |
1953 | continue; | |
1954 | info = port + i; | |
1955 | ||
8ea2c2ec | 1956 | /* following add by Victor Yu. 09-13-2002 */ |
1da177e4 LT |
1957 | iir = inb(info->base + UART_IIR); |
1958 | if (iir & UART_IIR_NO_INT) | |
1959 | continue; | |
1960 | iir &= MOXA_MUST_IIR_MASK; | |
1961 | if (!info->tty) { | |
1962 | status = inb(info->base + UART_LSR); | |
1963 | outb(0x27, info->base + UART_FCR); | |
1964 | inb(info->base + UART_MSR); | |
1965 | continue; | |
1966 | } | |
8ea2c2ec | 1967 | /* above add by Victor Yu. 09-13-2002 */ |
1da177e4 | 1968 | /* |
8ea2c2ec | 1969 | if (info->tty->flip.count < TTY_FLIPBUF_SIZE / 4) { |
1da177e4 LT |
1970 | info->IER |= MOXA_MUST_RECV_ISR; |
1971 | outb(info->IER, info->base + UART_IER); | |
1972 | } | |
1973 | */ | |
1974 | ||
1975 | ||
1976 | /* mask by Victor Yu. 09-13-2002 | |
1977 | if ( !info->tty || | |
1978 | (inb(info->base + UART_IIR) & UART_IIR_NO_INT) ) | |
1979 | continue; | |
1980 | */ | |
1981 | /* mask by Victor Yu. 09-02-2002 | |
1982 | status = inb(info->base + UART_LSR) & info->read_status_mask; | |
1983 | */ | |
1984 | ||
8ea2c2ec | 1985 | /* following add by Victor Yu. 09-02-2002 */ |
1da177e4 LT |
1986 | status = inb(info->base + UART_LSR); |
1987 | ||
8ea2c2ec | 1988 | if (status & UART_LSR_PE) |
1da177e4 | 1989 | info->err_shadow |= NPPI_NOTIFY_PARITY; |
8ea2c2ec | 1990 | if (status & UART_LSR_FE) |
1da177e4 | 1991 | info->err_shadow |= NPPI_NOTIFY_FRAMING; |
8ea2c2ec | 1992 | if (status & UART_LSR_OE) |
1da177e4 | 1993 | info->err_shadow |= NPPI_NOTIFY_HW_OVERRUN; |
1da177e4 LT |
1994 | if (status & UART_LSR_BI) |
1995 | info->err_shadow |= NPPI_NOTIFY_BREAK; | |
1996 | ||
1997 | if (info->IsMoxaMustChipFlag) { | |
1998 | /* | |
1999 | if ( (status & 0x02) && !(status & 0x01) ) { | |
2000 | outb(info->base+UART_FCR, 0x23); | |
2001 | continue; | |
2002 | } | |
2003 | */ | |
8ea2c2ec JJ |
2004 | if (iir == MOXA_MUST_IIR_GDA || |
2005 | iir == MOXA_MUST_IIR_RDA || | |
2006 | iir == MOXA_MUST_IIR_RTO || | |
2007 | iir == MOXA_MUST_IIR_LSR) | |
1da177e4 LT |
2008 | mxser_receive_chars(info, &status); |
2009 | ||
2010 | } else { | |
8ea2c2ec | 2011 | /* above add by Victor Yu. 09-02-2002 */ |
1da177e4 LT |
2012 | |
2013 | status &= info->read_status_mask; | |
2014 | if (status & UART_LSR_DR) | |
2015 | mxser_receive_chars(info, &status); | |
2016 | } | |
2017 | msr = inb(info->base + UART_MSR); | |
2018 | if (msr & UART_MSR_ANY_DELTA) { | |
2019 | mxser_check_modem_status(info, msr); | |
2020 | } | |
8ea2c2ec | 2021 | /* following add by Victor Yu. 09-13-2002 */ |
1da177e4 LT |
2022 | if (info->IsMoxaMustChipFlag) { |
2023 | if ((iir == 0x02) && (status & UART_LSR_THRE)) { | |
2024 | mxser_transmit_chars(info); | |
2025 | } | |
2026 | } else { | |
8ea2c2ec | 2027 | /* above add by Victor Yu. 09-13-2002 */ |
1da177e4 LT |
2028 | |
2029 | if (status & UART_LSR_THRE) { | |
2030 | /* 8-2-99 by William | |
2031 | if ( info->x_char || (info->xmit_cnt > 0) ) | |
2032 | */ | |
2033 | mxser_transmit_chars(info); | |
2034 | } | |
2035 | } | |
2036 | } | |
2037 | if (pass_counter++ > MXSER_ISR_PASS_LIMIT) { | |
2038 | break; /* Prevent infinite loops */ | |
2039 | } | |
2040 | } | |
2041 | ||
2042 | irq_stop: | |
8ea2c2ec | 2043 | /* spin_unlock(&gm_lock); */ |
1da177e4 LT |
2044 | return handled; |
2045 | } | |
2046 | ||
2047 | static void mxser_receive_chars(struct mxser_struct *info, int *status) | |
2048 | { | |
2049 | struct tty_struct *tty = info->tty; | |
2050 | unsigned char ch, gdl; | |
2051 | int ignored = 0; | |
2052 | int cnt = 0; | |
1da177e4 LT |
2053 | int recv_room; |
2054 | int max = 256; | |
2055 | unsigned long flags; | |
2056 | ||
2057 | spin_lock_irqsave(&info->slock, flags); | |
2058 | ||
33f0f88f | 2059 | recv_room = tty->receive_room; |
1da177e4 | 2060 | if ((recv_room == 0) && (!info->ldisc_stop_rx)) { |
8ea2c2ec | 2061 | /* mxser_throttle(tty); */ |
1da177e4 | 2062 | mxser_stoprx(tty); |
8ea2c2ec | 2063 | /* return; */ |
1da177e4 LT |
2064 | } |
2065 | ||
8ea2c2ec | 2066 | /* following add by Victor Yu. 09-02-2002 */ |
1da177e4 LT |
2067 | if (info->IsMoxaMustChipFlag != MOXA_OTHER_UART) { |
2068 | ||
2069 | if (*status & UART_LSR_SPECIAL) { | |
2070 | goto intr_old; | |
2071 | } | |
8ea2c2ec JJ |
2072 | /* following add by Victor Yu. 02-11-2004 */ |
2073 | if (info->IsMoxaMustChipFlag == MOXA_MUST_MU860_HWID && | |
2074 | (*status & MOXA_MUST_LSR_RERR)) | |
1da177e4 | 2075 | goto intr_old; |
8ea2c2ec | 2076 | /* above add by Victor Yu. 02-14-2004 */ |
1da177e4 LT |
2077 | if (*status & MOXA_MUST_LSR_RERR) |
2078 | goto intr_old; | |
2079 | ||
2080 | gdl = inb(info->base + MOXA_MUST_GDL_REGISTER); | |
2081 | ||
8ea2c2ec JJ |
2082 | /* add by Victor Yu. 02-11-2004 */ |
2083 | if (info->IsMoxaMustChipFlag == MOXA_MUST_MU150_HWID) | |
1da177e4 LT |
2084 | gdl &= MOXA_MUST_GDL_MASK; |
2085 | if (gdl >= recv_room) { | |
2086 | if (!info->ldisc_stop_rx) { | |
8ea2c2ec | 2087 | /* mxser_throttle(tty); */ |
1da177e4 LT |
2088 | mxser_stoprx(tty); |
2089 | } | |
8ea2c2ec | 2090 | /* return; */ |
1da177e4 LT |
2091 | } |
2092 | while (gdl--) { | |
2093 | ch = inb(info->base + UART_RX); | |
3399ba5b | 2094 | tty_insert_flip_char(tty, ch, 0); |
1da177e4 LT |
2095 | cnt++; |
2096 | /* | |
8ea2c2ec | 2097 | if ((cnt >= HI_WATER) && (info->stop_rx == 0)) { |
1da177e4 | 2098 | mxser_stoprx(tty); |
8ea2c2ec | 2099 | info->stop_rx = 1; |
1da177e4 LT |
2100 | break; |
2101 | } */ | |
2102 | } | |
2103 | goto end_intr; | |
2104 | } | |
8ea2c2ec JJ |
2105 | intr_old: |
2106 | /* above add by Victor Yu. 09-02-2002 */ | |
1da177e4 LT |
2107 | |
2108 | do { | |
2109 | if (max-- < 0) | |
2110 | break; | |
2111 | /* | |
8ea2c2ec | 2112 | if ((cnt >= HI_WATER) && (info->stop_rx == 0)) { |
1da177e4 LT |
2113 | mxser_stoprx(tty); |
2114 | info->stop_rx=1; | |
2115 | break; | |
2116 | } | |
2117 | */ | |
2118 | ||
2119 | ch = inb(info->base + UART_RX); | |
8ea2c2ec | 2120 | /* following add by Victor Yu. 09-02-2002 */ |
1da177e4 LT |
2121 | if (info->IsMoxaMustChipFlag && (*status & UART_LSR_OE) /*&& !(*status&UART_LSR_DR) */ ) |
2122 | outb(0x23, info->base + UART_FCR); | |
2123 | *status &= info->read_status_mask; | |
8ea2c2ec | 2124 | /* above add by Victor Yu. 09-02-2002 */ |
1da177e4 LT |
2125 | if (*status & info->ignore_status_mask) { |
2126 | if (++ignored > 100) | |
2127 | break; | |
2128 | } else { | |
3399ba5b | 2129 | char flag = 0; |
1da177e4 LT |
2130 | if (*status & UART_LSR_SPECIAL) { |
2131 | if (*status & UART_LSR_BI) { | |
3399ba5b | 2132 | flag = TTY_BREAK; |
1da177e4 LT |
2133 | /* added by casper 1/11/2000 */ |
2134 | info->icount.brk++; | |
1da177e4 LT |
2135 | /* */ |
2136 | if (info->flags & ASYNC_SAK) | |
2137 | do_SAK(tty); | |
2138 | } else if (*status & UART_LSR_PE) { | |
3399ba5b | 2139 | flag = TTY_PARITY; |
1da177e4 LT |
2140 | /* added by casper 1/11/2000 */ |
2141 | info->icount.parity++; | |
2142 | /* */ | |
2143 | } else if (*status & UART_LSR_FE) { | |
3399ba5b | 2144 | flag = TTY_FRAME; |
1da177e4 LT |
2145 | /* added by casper 1/11/2000 */ |
2146 | info->icount.frame++; | |
2147 | /* */ | |
2148 | } else if (*status & UART_LSR_OE) { | |
3399ba5b | 2149 | flag = TTY_OVERRUN; |
1da177e4 LT |
2150 | /* added by casper 1/11/2000 */ |
2151 | info->icount.overrun++; | |
2152 | /* */ | |
3399ba5b DV |
2153 | } |
2154 | } | |
2155 | tty_insert_flip_char(tty, ch, flag); | |
1da177e4 LT |
2156 | cnt++; |
2157 | if (cnt >= recv_room) { | |
2158 | if (!info->ldisc_stop_rx) { | |
8ea2c2ec | 2159 | /* mxser_throttle(tty); */ |
1da177e4 LT |
2160 | mxser_stoprx(tty); |
2161 | } | |
2162 | break; | |
2163 | } | |
2164 | ||
2165 | } | |
2166 | ||
8ea2c2ec | 2167 | /* following add by Victor Yu. 09-02-2002 */ |
1da177e4 LT |
2168 | if (info->IsMoxaMustChipFlag) |
2169 | break; | |
8ea2c2ec | 2170 | /* above add by Victor Yu. 09-02-2002 */ |
1da177e4 LT |
2171 | |
2172 | /* mask by Victor Yu. 09-02-2002 | |
2173 | *status = inb(info->base + UART_LSR) & info->read_status_mask; | |
2174 | */ | |
8ea2c2ec | 2175 | /* following add by Victor Yu. 09-02-2002 */ |
1da177e4 | 2176 | *status = inb(info->base + UART_LSR); |
8ea2c2ec | 2177 | /* above add by Victor Yu. 09-02-2002 */ |
1da177e4 LT |
2178 | } while (*status & UART_LSR_DR); |
2179 | ||
8ea2c2ec | 2180 | end_intr: /* add by Victor Yu. 09-02-2002 */ |
1da177e4 LT |
2181 | mxvar_log.rxcnt[info->port] += cnt; |
2182 | info->mon_data.rxcnt += cnt; | |
2183 | info->mon_data.up_rxcnt += cnt; | |
2184 | spin_unlock_irqrestore(&info->slock, flags); | |
3399ba5b | 2185 | |
1da177e4 LT |
2186 | tty_flip_buffer_push(tty); |
2187 | } | |
2188 | ||
2189 | static void mxser_transmit_chars(struct mxser_struct *info) | |
2190 | { | |
2191 | int count, cnt; | |
2192 | unsigned long flags; | |
2193 | ||
2194 | spin_lock_irqsave(&info->slock, flags); | |
2195 | ||
2196 | if (info->x_char) { | |
2197 | outb(info->x_char, info->base + UART_TX); | |
2198 | info->x_char = 0; | |
2199 | mxvar_log.txcnt[info->port]++; | |
2200 | info->mon_data.txcnt++; | |
2201 | info->mon_data.up_txcnt++; | |
2202 | ||
2203 | /* added by casper 1/11/2000 */ | |
2204 | info->icount.tx++; | |
2205 | /* */ | |
2206 | spin_unlock_irqrestore(&info->slock, flags); | |
2207 | return; | |
2208 | } | |
2209 | ||
2210 | if (info->xmit_buf == 0) { | |
2211 | spin_unlock_irqrestore(&info->slock, flags); | |
2212 | return; | |
2213 | } | |
2214 | ||
8ea2c2ec JJ |
2215 | if ((info->xmit_cnt <= 0) || info->tty->stopped || |
2216 | (info->tty->hw_stopped && | |
2217 | (info->type != PORT_16550A) && | |
2218 | (!info->IsMoxaMustChipFlag))) { | |
1da177e4 LT |
2219 | info->IER &= ~UART_IER_THRI; |
2220 | outb(info->IER, info->base + UART_IER); | |
2221 | spin_unlock_irqrestore(&info->slock, flags); | |
2222 | return; | |
2223 | } | |
2224 | ||
2225 | cnt = info->xmit_cnt; | |
2226 | count = info->xmit_fifo_size; | |
2227 | do { | |
8ea2c2ec JJ |
2228 | outb(info->xmit_buf[info->xmit_tail++], |
2229 | info->base + UART_TX); | |
1da177e4 LT |
2230 | info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE - 1); |
2231 | if (--info->xmit_cnt <= 0) | |
2232 | break; | |
2233 | } while (--count > 0); | |
2234 | mxvar_log.txcnt[info->port] += (cnt - info->xmit_cnt); | |
2235 | ||
8ea2c2ec | 2236 | /* added by James 03-12-2004. */ |
1da177e4 LT |
2237 | info->mon_data.txcnt += (cnt - info->xmit_cnt); |
2238 | info->mon_data.up_txcnt += (cnt - info->xmit_cnt); | |
8ea2c2ec | 2239 | /* (above) added by James. */ |
1da177e4 LT |
2240 | |
2241 | /* added by casper 1/11/2000 */ | |
2242 | info->icount.tx += (cnt - info->xmit_cnt); | |
2243 | /* */ | |
2244 | ||
2245 | if (info->xmit_cnt < WAKEUP_CHARS) { | |
2246 | set_bit(MXSER_EVENT_TXLOW, &info->event); | |
2247 | schedule_work(&info->tqueue); | |
2248 | } | |
2249 | if (info->xmit_cnt <= 0) { | |
2250 | info->IER &= ~UART_IER_THRI; | |
2251 | outb(info->IER, info->base + UART_IER); | |
2252 | } | |
2253 | spin_unlock_irqrestore(&info->slock, flags); | |
2254 | } | |
2255 | ||
2256 | static void mxser_check_modem_status(struct mxser_struct *info, int status) | |
2257 | { | |
2258 | /* update input line counters */ | |
2259 | if (status & UART_MSR_TERI) | |
2260 | info->icount.rng++; | |
2261 | if (status & UART_MSR_DDSR) | |
2262 | info->icount.dsr++; | |
2263 | if (status & UART_MSR_DDCD) | |
2264 | info->icount.dcd++; | |
2265 | if (status & UART_MSR_DCTS) | |
2266 | info->icount.cts++; | |
2267 | info->mon_data.modem_status = status; | |
2268 | wake_up_interruptible(&info->delta_msr_wait); | |
2269 | ||
1da177e4 LT |
2270 | if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) { |
2271 | if (status & UART_MSR_DCD) | |
2272 | wake_up_interruptible(&info->open_wait); | |
2273 | schedule_work(&info->tqueue); | |
2274 | } | |
2275 | ||
2276 | if (info->flags & ASYNC_CTS_FLOW) { | |
2277 | if (info->tty->hw_stopped) { | |
2278 | if (status & UART_MSR_CTS) { | |
2279 | info->tty->hw_stopped = 0; | |
2280 | ||
8ea2c2ec JJ |
2281 | if ((info->type != PORT_16550A) && |
2282 | (!info->IsMoxaMustChipFlag)) { | |
1da177e4 LT |
2283 | info->IER |= UART_IER_THRI; |
2284 | outb(info->IER, info->base + UART_IER); | |
2285 | } | |
2286 | set_bit(MXSER_EVENT_TXLOW, &info->event); | |
2287 | schedule_work(&info->tqueue); } | |
2288 | } else { | |
2289 | if (!(status & UART_MSR_CTS)) { | |
2290 | info->tty->hw_stopped = 1; | |
8ea2c2ec JJ |
2291 | if ((info->type != PORT_16550A) && |
2292 | (!info->IsMoxaMustChipFlag)) { | |
1da177e4 LT |
2293 | info->IER &= ~UART_IER_THRI; |
2294 | outb(info->IER, info->base + UART_IER); | |
2295 | } | |
2296 | } | |
2297 | } | |
2298 | } | |
2299 | } | |
2300 | ||
2301 | static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp, struct mxser_struct *info) | |
2302 | { | |
2303 | DECLARE_WAITQUEUE(wait, current); | |
2304 | int retval; | |
2305 | int do_clocal = 0; | |
2306 | unsigned long flags; | |
2307 | ||
2308 | /* | |
2309 | * If non-blocking mode is set, or the port is not enabled, | |
2310 | * then make the check up front and then exit. | |
2311 | */ | |
2312 | if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) { | |
2313 | info->flags |= ASYNC_NORMAL_ACTIVE; | |
8ea2c2ec | 2314 | return 0; |
1da177e4 LT |
2315 | } |
2316 | ||
2317 | if (tty->termios->c_cflag & CLOCAL) | |
2318 | do_clocal = 1; | |
2319 | ||
2320 | /* | |
2321 | * Block waiting for the carrier detect and the line to become | |
2322 | * free (i.e., not in use by the callout). While we are in | |
2323 | * this loop, info->count is dropped by one, so that | |
2324 | * mxser_close() knows when to free things. We restore it upon | |
2325 | * exit, either normal or abnormal. | |
2326 | */ | |
2327 | retval = 0; | |
2328 | add_wait_queue(&info->open_wait, &wait); | |
2329 | ||
2330 | spin_lock_irqsave(&info->slock, flags); | |
2331 | if (!tty_hung_up_p(filp)) | |
2332 | info->count--; | |
2333 | spin_unlock_irqrestore(&info->slock, flags); | |
2334 | info->blocked_open++; | |
2335 | while (1) { | |
2336 | spin_lock_irqsave(&info->slock, flags); | |
8ea2c2ec JJ |
2337 | outb(inb(info->base + UART_MCR) | |
2338 | UART_MCR_DTR | UART_MCR_RTS, info->base + UART_MCR); | |
1da177e4 LT |
2339 | spin_unlock_irqrestore(&info->slock, flags); |
2340 | set_current_state(TASK_INTERRUPTIBLE); | |
2341 | if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)) { | |
2342 | if (info->flags & ASYNC_HUP_NOTIFY) | |
2343 | retval = -EAGAIN; | |
2344 | else | |
2345 | retval = -ERESTARTSYS; | |
2346 | break; | |
2347 | } | |
8ea2c2ec JJ |
2348 | if (!(info->flags & ASYNC_CLOSING) && |
2349 | (do_clocal || | |
2350 | (inb(info->base + UART_MSR) & UART_MSR_DCD))) | |
1da177e4 LT |
2351 | break; |
2352 | if (signal_pending(current)) { | |
2353 | retval = -ERESTARTSYS; | |
2354 | break; | |
2355 | } | |
2356 | schedule(); | |
2357 | } | |
2358 | set_current_state(TASK_RUNNING); | |
2359 | remove_wait_queue(&info->open_wait, &wait); | |
2360 | if (!tty_hung_up_p(filp)) | |
2361 | info->count++; | |
2362 | info->blocked_open--; | |
2363 | if (retval) | |
8ea2c2ec | 2364 | return retval; |
1da177e4 | 2365 | info->flags |= ASYNC_NORMAL_ACTIVE; |
8ea2c2ec | 2366 | return 0; |
1da177e4 LT |
2367 | } |
2368 | ||
2369 | static int mxser_startup(struct mxser_struct *info) | |
2370 | { | |
1da177e4 LT |
2371 | unsigned long page; |
2372 | unsigned long flags; | |
2373 | ||
2374 | page = __get_free_page(GFP_KERNEL); | |
2375 | if (!page) | |
8ea2c2ec | 2376 | return -ENOMEM; |
1da177e4 LT |
2377 | |
2378 | spin_lock_irqsave(&info->slock, flags); | |
2379 | ||
2380 | if (info->flags & ASYNC_INITIALIZED) { | |
2381 | free_page(page); | |
2382 | spin_unlock_irqrestore(&info->slock, flags); | |
8ea2c2ec | 2383 | return 0; |
1da177e4 LT |
2384 | } |
2385 | ||
2386 | if (!info->base || !info->type) { | |
2387 | if (info->tty) | |
2388 | set_bit(TTY_IO_ERROR, &info->tty->flags); | |
2389 | free_page(page); | |
2390 | spin_unlock_irqrestore(&info->slock, flags); | |
8ea2c2ec | 2391 | return 0; |
1da177e4 LT |
2392 | } |
2393 | if (info->xmit_buf) | |
2394 | free_page(page); | |
2395 | else | |
2396 | info->xmit_buf = (unsigned char *) page; | |
2397 | ||
2398 | /* | |
2399 | * Clear the FIFO buffers and disable them | |
2400 | * (they will be reenabled in mxser_change_speed()) | |
2401 | */ | |
2402 | if (info->IsMoxaMustChipFlag) | |
8ea2c2ec JJ |
2403 | outb((UART_FCR_CLEAR_RCVR | |
2404 | UART_FCR_CLEAR_XMIT | | |
2405 | MOXA_MUST_FCR_GDA_MODE_ENABLE), info->base + UART_FCR); | |
1da177e4 | 2406 | else |
8ea2c2ec JJ |
2407 | outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), |
2408 | info->base + UART_FCR); | |
1da177e4 LT |
2409 | |
2410 | /* | |
2411 | * At this point there's no way the LSR could still be 0xFF; | |
2412 | * if it is, then bail out, because there's likely no UART | |
2413 | * here. | |
2414 | */ | |
2415 | if (inb(info->base + UART_LSR) == 0xff) { | |
2416 | spin_unlock_irqrestore(&info->slock, flags); | |
2417 | if (capable(CAP_SYS_ADMIN)) { | |
2418 | if (info->tty) | |
2419 | set_bit(TTY_IO_ERROR, &info->tty->flags); | |
8ea2c2ec | 2420 | return 0; |
1da177e4 | 2421 | } else |
8ea2c2ec | 2422 | return -ENODEV; |
1da177e4 LT |
2423 | } |
2424 | ||
2425 | /* | |
2426 | * Clear the interrupt registers. | |
2427 | */ | |
2428 | (void) inb(info->base + UART_LSR); | |
2429 | (void) inb(info->base + UART_RX); | |
2430 | (void) inb(info->base + UART_IIR); | |
2431 | (void) inb(info->base + UART_MSR); | |
2432 | ||
2433 | /* | |
2434 | * Now, initialize the UART | |
2435 | */ | |
2436 | outb(UART_LCR_WLEN8, info->base + UART_LCR); /* reset DLAB */ | |
2437 | info->MCR = UART_MCR_DTR | UART_MCR_RTS; | |
2438 | outb(info->MCR, info->base + UART_MCR); | |
2439 | ||
2440 | /* | |
2441 | * Finally, enable interrupts | |
2442 | */ | |
2443 | info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; | |
8ea2c2ec | 2444 | /* info->IER = UART_IER_RLSI | UART_IER_RDI; */ |
1da177e4 | 2445 | |
8ea2c2ec | 2446 | /* following add by Victor Yu. 08-30-2002 */ |
1da177e4 LT |
2447 | if (info->IsMoxaMustChipFlag) |
2448 | info->IER |= MOXA_MUST_IER_EGDAI; | |
8ea2c2ec | 2449 | /* above add by Victor Yu. 08-30-2002 */ |
1da177e4 LT |
2450 | outb(info->IER, info->base + UART_IER); /* enable interrupts */ |
2451 | ||
2452 | /* | |
2453 | * And clear the interrupt registers again for luck. | |
2454 | */ | |
2455 | (void) inb(info->base + UART_LSR); | |
2456 | (void) inb(info->base + UART_RX); | |
2457 | (void) inb(info->base + UART_IIR); | |
2458 | (void) inb(info->base + UART_MSR); | |
2459 | ||
2460 | if (info->tty) | |
2461 | clear_bit(TTY_IO_ERROR, &info->tty->flags); | |
2462 | info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; | |
2463 | ||
2464 | /* | |
2465 | * and set the speed of the serial port | |
2466 | */ | |
2467 | spin_unlock_irqrestore(&info->slock, flags); | |
2468 | mxser_change_speed(info, NULL); | |
2469 | ||
2470 | info->flags |= ASYNC_INITIALIZED; | |
8ea2c2ec | 2471 | return 0; |
1da177e4 LT |
2472 | } |
2473 | ||
2474 | /* | |
2475 | * This routine will shutdown a serial port; interrupts maybe disabled, and | |
2476 | * DTR is dropped if the hangup on close termio flag is on. | |
2477 | */ | |
2478 | static void mxser_shutdown(struct mxser_struct *info) | |
2479 | { | |
2480 | unsigned long flags; | |
2481 | ||
2482 | if (!(info->flags & ASYNC_INITIALIZED)) | |
2483 | return; | |
2484 | ||
2485 | spin_lock_irqsave(&info->slock, flags); | |
2486 | ||
2487 | /* | |
2488 | * clear delta_msr_wait queue to avoid mem leaks: we may free the irq | |
2489 | * here so the queue might never be waken up | |
2490 | */ | |
2491 | wake_up_interruptible(&info->delta_msr_wait); | |
2492 | ||
2493 | /* | |
2494 | * Free the IRQ, if necessary | |
2495 | */ | |
2496 | if (info->xmit_buf) { | |
2497 | free_page((unsigned long) info->xmit_buf); | |
2498 | info->xmit_buf = NULL; | |
2499 | } | |
2500 | ||
2501 | info->IER = 0; | |
2502 | outb(0x00, info->base + UART_IER); | |
2503 | ||
2504 | if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) | |
2505 | info->MCR &= ~(UART_MCR_DTR | UART_MCR_RTS); | |
2506 | outb(info->MCR, info->base + UART_MCR); | |
2507 | ||
2508 | /* clear Rx/Tx FIFO's */ | |
8ea2c2ec | 2509 | /* following add by Victor Yu. 08-30-2002 */ |
1da177e4 | 2510 | if (info->IsMoxaMustChipFlag) |
8ea2c2ec JJ |
2511 | outb((UART_FCR_CLEAR_RCVR | |
2512 | UART_FCR_CLEAR_XMIT | | |
2513 | MOXA_MUST_FCR_GDA_MODE_ENABLE), info->base + UART_FCR); | |
1da177e4 | 2514 | else |
8ea2c2ec JJ |
2515 | /* above add by Victor Yu. 08-30-2002 */ |
2516 | outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), | |
2517 | info->base + UART_FCR); | |
1da177e4 LT |
2518 | |
2519 | /* read data port to reset things */ | |
2520 | (void) inb(info->base + UART_RX); | |
2521 | ||
2522 | if (info->tty) | |
2523 | set_bit(TTY_IO_ERROR, &info->tty->flags); | |
2524 | ||
2525 | info->flags &= ~ASYNC_INITIALIZED; | |
2526 | ||
8ea2c2ec JJ |
2527 | /* following add by Victor Yu. 09-23-2002 */ |
2528 | if (info->IsMoxaMustChipFlag) | |
1da177e4 | 2529 | SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->base); |
8ea2c2ec | 2530 | /* above add by Victor Yu. 09-23-2002 */ |
1da177e4 LT |
2531 | |
2532 | spin_unlock_irqrestore(&info->slock, flags); | |
2533 | } | |
2534 | ||
2535 | /* | |
2536 | * This routine is called to set the UART divisor registers to match | |
2537 | * the specified baud rate for a serial port. | |
2538 | */ | |
2539 | static int mxser_change_speed(struct mxser_struct *info, struct termios *old_termios) | |
2540 | { | |
2541 | unsigned cflag, cval, fcr; | |
2542 | int ret = 0; | |
2543 | unsigned char status; | |
2544 | long baud; | |
2545 | unsigned long flags; | |
2546 | ||
1da177e4 LT |
2547 | if (!info->tty || !info->tty->termios) |
2548 | return ret; | |
2549 | cflag = info->tty->termios->c_cflag; | |
2550 | if (!(info->base)) | |
2551 | return ret; | |
2552 | ||
1da177e4 LT |
2553 | #ifndef B921600 |
2554 | #define B921600 (B460800 +1) | |
2555 | #endif | |
2556 | if (mxser_set_baud_method[info->port] == 0) { | |
2557 | switch (cflag & (CBAUD | CBAUDEX)) { | |
2558 | case B921600: | |
2559 | baud = 921600; | |
2560 | break; | |
2561 | case B460800: | |
2562 | baud = 460800; | |
2563 | break; | |
2564 | case B230400: | |
2565 | baud = 230400; | |
2566 | break; | |
2567 | case B115200: | |
2568 | baud = 115200; | |
2569 | break; | |
2570 | case B57600: | |
2571 | baud = 57600; | |
2572 | break; | |
2573 | case B38400: | |
2574 | baud = 38400; | |
2575 | break; | |
2576 | case B19200: | |
2577 | baud = 19200; | |
2578 | break; | |
2579 | case B9600: | |
2580 | baud = 9600; | |
2581 | break; | |
2582 | case B4800: | |
2583 | baud = 4800; | |
2584 | break; | |
2585 | case B2400: | |
2586 | baud = 2400; | |
2587 | break; | |
2588 | case B1800: | |
2589 | baud = 1800; | |
2590 | break; | |
2591 | case B1200: | |
2592 | baud = 1200; | |
2593 | break; | |
2594 | case B600: | |
2595 | baud = 600; | |
2596 | break; | |
2597 | case B300: | |
2598 | baud = 300; | |
2599 | break; | |
2600 | case B200: | |
2601 | baud = 200; | |
2602 | break; | |
2603 | case B150: | |
2604 | baud = 150; | |
2605 | break; | |
2606 | case B134: | |
2607 | baud = 134; | |
2608 | break; | |
2609 | case B110: | |
2610 | baud = 110; | |
2611 | break; | |
2612 | case B75: | |
2613 | baud = 75; | |
2614 | break; | |
2615 | case B50: | |
2616 | baud = 50; | |
2617 | break; | |
2618 | default: | |
2619 | baud = 0; | |
2620 | break; | |
2621 | } | |
2622 | mxser_set_baud(info, baud); | |
2623 | } | |
2624 | ||
2625 | /* byte size and parity */ | |
2626 | switch (cflag & CSIZE) { | |
2627 | case CS5: | |
2628 | cval = 0x00; | |
2629 | break; | |
2630 | case CS6: | |
2631 | cval = 0x01; | |
2632 | break; | |
2633 | case CS7: | |
2634 | cval = 0x02; | |
2635 | break; | |
2636 | case CS8: | |
2637 | cval = 0x03; | |
2638 | break; | |
2639 | default: | |
2640 | cval = 0x00; | |
2641 | break; /* too keep GCC shut... */ | |
2642 | } | |
2643 | if (cflag & CSTOPB) | |
2644 | cval |= 0x04; | |
2645 | if (cflag & PARENB) | |
2646 | cval |= UART_LCR_PARITY; | |
8ea2c2ec | 2647 | if (!(cflag & PARODD)) |
1da177e4 | 2648 | cval |= UART_LCR_EPAR; |
1da177e4 LT |
2649 | if (cflag & CMSPAR) |
2650 | cval |= UART_LCR_SPAR; | |
2651 | ||
2652 | if ((info->type == PORT_8250) || (info->type == PORT_16450)) { | |
2653 | if (info->IsMoxaMustChipFlag) { | |
2654 | fcr = UART_FCR_ENABLE_FIFO; | |
2655 | fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; | |
2656 | SET_MOXA_MUST_FIFO_VALUE(info); | |
2657 | } else | |
2658 | fcr = 0; | |
2659 | } else { | |
2660 | fcr = UART_FCR_ENABLE_FIFO; | |
8ea2c2ec | 2661 | /* following add by Victor Yu. 08-30-2002 */ |
1da177e4 LT |
2662 | if (info->IsMoxaMustChipFlag) { |
2663 | fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; | |
2664 | SET_MOXA_MUST_FIFO_VALUE(info); | |
2665 | } else { | |
8ea2c2ec | 2666 | /* above add by Victor Yu. 08-30-2002 */ |
1da177e4 LT |
2667 | switch (info->rx_trigger) { |
2668 | case 1: | |
2669 | fcr |= UART_FCR_TRIGGER_1; | |
2670 | break; | |
2671 | case 4: | |
2672 | fcr |= UART_FCR_TRIGGER_4; | |
2673 | break; | |
2674 | case 8: | |
2675 | fcr |= UART_FCR_TRIGGER_8; | |
2676 | break; | |
2677 | default: | |
2678 | fcr |= UART_FCR_TRIGGER_14; | |
2679 | break; | |
2680 | } | |
2681 | } | |
2682 | } | |
2683 | ||
2684 | /* CTS flow control flag and modem status interrupts */ | |
2685 | info->IER &= ~UART_IER_MSI; | |
2686 | info->MCR &= ~UART_MCR_AFE; | |
2687 | if (cflag & CRTSCTS) { | |
2688 | info->flags |= ASYNC_CTS_FLOW; | |
2689 | info->IER |= UART_IER_MSI; | |
2690 | if ((info->type == PORT_16550A) || (info->IsMoxaMustChipFlag)) { | |
2691 | info->MCR |= UART_MCR_AFE; | |
8ea2c2ec JJ |
2692 | /* status = mxser_get_msr(info->base, 0, info->port); */ |
2693 | /* | |
2694 | save_flags(flags); | |
1da177e4 LT |
2695 | cli(); |
2696 | status = inb(baseaddr + UART_MSR); | |
8ea2c2ec JJ |
2697 | restore_flags(flags); |
2698 | */ | |
2699 | /* mxser_check_modem_status(info, status); */ | |
1da177e4 | 2700 | } else { |
8ea2c2ec JJ |
2701 | /* status = mxser_get_msr(info->base, 0, info->port); */ |
2702 | /* MX_LOCK(&info->slock); */ | |
1da177e4 | 2703 | status = inb(info->base + UART_MSR); |
8ea2c2ec | 2704 | /* MX_UNLOCK(&info->slock); */ |
1da177e4 LT |
2705 | if (info->tty->hw_stopped) { |
2706 | if (status & UART_MSR_CTS) { | |
2707 | info->tty->hw_stopped = 0; | |
8ea2c2ec JJ |
2708 | if ((info->type != PORT_16550A) && |
2709 | (!info->IsMoxaMustChipFlag)) { | |
1da177e4 LT |
2710 | info->IER |= UART_IER_THRI; |
2711 | outb(info->IER, info->base + UART_IER); | |
2712 | } | |
2713 | set_bit(MXSER_EVENT_TXLOW, &info->event); | |
2714 | schedule_work(&info->tqueue); } | |
2715 | } else { | |
2716 | if (!(status & UART_MSR_CTS)) { | |
2717 | info->tty->hw_stopped = 1; | |
8ea2c2ec JJ |
2718 | if ((info->type != PORT_16550A) && |
2719 | (!info->IsMoxaMustChipFlag)) { | |
1da177e4 LT |
2720 | info->IER &= ~UART_IER_THRI; |
2721 | outb(info->IER, info->base + UART_IER); | |
2722 | } | |
2723 | } | |
2724 | } | |
2725 | } | |
2726 | } else { | |
2727 | info->flags &= ~ASYNC_CTS_FLOW; | |
2728 | } | |
2729 | outb(info->MCR, info->base + UART_MCR); | |
2730 | if (cflag & CLOCAL) { | |
2731 | info->flags &= ~ASYNC_CHECK_CD; | |
2732 | } else { | |
2733 | info->flags |= ASYNC_CHECK_CD; | |
2734 | info->IER |= UART_IER_MSI; | |
2735 | } | |
2736 | outb(info->IER, info->base + UART_IER); | |
2737 | ||
2738 | /* | |
2739 | * Set up parity check flag | |
2740 | */ | |
2741 | info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; | |
2742 | if (I_INPCK(info->tty)) | |
2743 | info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; | |
2744 | if (I_BRKINT(info->tty) || I_PARMRK(info->tty)) | |
2745 | info->read_status_mask |= UART_LSR_BI; | |
2746 | ||
2747 | info->ignore_status_mask = 0; | |
2748 | ||
2749 | if (I_IGNBRK(info->tty)) { | |
2750 | info->ignore_status_mask |= UART_LSR_BI; | |
2751 | info->read_status_mask |= UART_LSR_BI; | |
2752 | /* | |
2753 | * If we're ignore parity and break indicators, ignore | |
2754 | * overruns too. (For real raw support). | |
2755 | */ | |
2756 | if (I_IGNPAR(info->tty)) { | |
8ea2c2ec JJ |
2757 | info->ignore_status_mask |= |
2758 | UART_LSR_OE | | |
2759 | UART_LSR_PE | | |
2760 | UART_LSR_FE; | |
2761 | info->read_status_mask |= | |
2762 | UART_LSR_OE | | |
2763 | UART_LSR_PE | | |
2764 | UART_LSR_FE; | |
1da177e4 LT |
2765 | } |
2766 | } | |
8ea2c2ec | 2767 | /* following add by Victor Yu. 09-02-2002 */ |
1da177e4 LT |
2768 | if (info->IsMoxaMustChipFlag) { |
2769 | spin_lock_irqsave(&info->slock, flags); | |
2770 | SET_MOXA_MUST_XON1_VALUE(info->base, START_CHAR(info->tty)); | |
2771 | SET_MOXA_MUST_XOFF1_VALUE(info->base, STOP_CHAR(info->tty)); | |
2772 | if (I_IXON(info->tty)) { | |
2773 | ENABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->base); | |
2774 | } else { | |
2775 | DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->base); | |
2776 | } | |
2777 | if (I_IXOFF(info->tty)) { | |
2778 | ENABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->base); | |
2779 | } else { | |
2780 | DISABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->base); | |
2781 | } | |
2782 | /* | |
2783 | if ( I_IXANY(info->tty) ) { | |
2784 | info->MCR |= MOXA_MUST_MCR_XON_ANY; | |
2785 | ENABLE_MOXA_MUST_XON_ANY_FLOW_CONTROL(info->base); | |
2786 | } else { | |
2787 | info->MCR &= ~MOXA_MUST_MCR_XON_ANY; | |
2788 | DISABLE_MOXA_MUST_XON_ANY_FLOW_CONTROL(info->base); | |
2789 | } | |
2790 | */ | |
2791 | spin_unlock_irqrestore(&info->slock, flags); | |
2792 | } | |
8ea2c2ec | 2793 | /* above add by Victor Yu. 09-02-2002 */ |
1da177e4 LT |
2794 | |
2795 | ||
2796 | outb(fcr, info->base + UART_FCR); /* set fcr */ | |
2797 | outb(cval, info->base + UART_LCR); | |
2798 | ||
2799 | return ret; | |
2800 | } | |
2801 | ||
2802 | ||
2803 | static int mxser_set_baud(struct mxser_struct *info, long newspd) | |
2804 | { | |
2805 | int quot = 0; | |
2806 | unsigned char cval; | |
2807 | int ret = 0; | |
2808 | unsigned long flags; | |
2809 | ||
2810 | if (!info->tty || !info->tty->termios) | |
2811 | return ret; | |
2812 | ||
2813 | if (!(info->base)) | |
2814 | return ret; | |
2815 | ||
2816 | if (newspd > info->MaxCanSetBaudRate) | |
2817 | return 0; | |
2818 | ||
2819 | info->realbaud = newspd; | |
2820 | if (newspd == 134) { | |
2821 | quot = (2 * info->baud_base / 269); | |
2822 | } else if (newspd) { | |
2823 | quot = info->baud_base / newspd; | |
1da177e4 LT |
2824 | if (quot == 0) |
2825 | quot = 1; | |
1da177e4 LT |
2826 | } else { |
2827 | quot = 0; | |
2828 | } | |
2829 | ||
2830 | info->timeout = ((info->xmit_fifo_size * HZ * 10 * quot) / info->baud_base); | |
2831 | info->timeout += HZ / 50; /* Add .02 seconds of slop */ | |
2832 | ||
2833 | if (quot) { | |
2834 | spin_lock_irqsave(&info->slock, flags); | |
2835 | info->MCR |= UART_MCR_DTR; | |
2836 | outb(info->MCR, info->base + UART_MCR); | |
2837 | spin_unlock_irqrestore(&info->slock, flags); | |
2838 | } else { | |
2839 | spin_lock_irqsave(&info->slock, flags); | |
2840 | info->MCR &= ~UART_MCR_DTR; | |
2841 | outb(info->MCR, info->base + UART_MCR); | |
2842 | spin_unlock_irqrestore(&info->slock, flags); | |
2843 | return ret; | |
2844 | } | |
2845 | ||
2846 | cval = inb(info->base + UART_LCR); | |
2847 | ||
2848 | outb(cval | UART_LCR_DLAB, info->base + UART_LCR); /* set DLAB */ | |
2849 | ||
2850 | outb(quot & 0xff, info->base + UART_DLL); /* LS of divisor */ | |
2851 | outb(quot >> 8, info->base + UART_DLM); /* MS of divisor */ | |
2852 | outb(cval, info->base + UART_LCR); /* reset DLAB */ | |
2853 | ||
2854 | ||
2855 | return ret; | |
2856 | } | |
2857 | ||
1da177e4 LT |
2858 | /* |
2859 | * ------------------------------------------------------------ | |
2860 | * friends of mxser_ioctl() | |
2861 | * ------------------------------------------------------------ | |
2862 | */ | |
2863 | static int mxser_get_serial_info(struct mxser_struct *info, struct serial_struct __user *retinfo) | |
2864 | { | |
2865 | struct serial_struct tmp; | |
2866 | ||
2867 | if (!retinfo) | |
8ea2c2ec | 2868 | return -EFAULT; |
1da177e4 LT |
2869 | memset(&tmp, 0, sizeof(tmp)); |
2870 | tmp.type = info->type; | |
2871 | tmp.line = info->port; | |
2872 | tmp.port = info->base; | |
2873 | tmp.irq = info->irq; | |
2874 | tmp.flags = info->flags; | |
2875 | tmp.baud_base = info->baud_base; | |
2876 | tmp.close_delay = info->close_delay; | |
2877 | tmp.closing_wait = info->closing_wait; | |
2878 | tmp.custom_divisor = info->custom_divisor; | |
2879 | tmp.hub6 = 0; | |
2880 | if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) | |
2881 | return -EFAULT; | |
8ea2c2ec | 2882 | return 0; |
1da177e4 LT |
2883 | } |
2884 | ||
2885 | static int mxser_set_serial_info(struct mxser_struct *info, struct serial_struct __user *new_info) | |
2886 | { | |
2887 | struct serial_struct new_serial; | |
2888 | unsigned int flags; | |
2889 | int retval = 0; | |
2890 | ||
2891 | if (!new_info || !info->base) | |
8ea2c2ec | 2892 | return -EFAULT; |
1da177e4 LT |
2893 | if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) |
2894 | return -EFAULT; | |
2895 | ||
8ea2c2ec JJ |
2896 | if ((new_serial.irq != info->irq) || |
2897 | (new_serial.port != info->base) || | |
2898 | (new_serial.custom_divisor != info->custom_divisor) || | |
2899 | (new_serial.baud_base != info->baud_base)) | |
2900 | return -EPERM; | |
1da177e4 LT |
2901 | |
2902 | flags = info->flags & ASYNC_SPD_MASK; | |
2903 | ||
2904 | if (!capable(CAP_SYS_ADMIN)) { | |
8ea2c2ec JJ |
2905 | if ((new_serial.baud_base != info->baud_base) || |
2906 | (new_serial.close_delay != info->close_delay) || | |
2907 | ((new_serial.flags & ~ASYNC_USR_MASK) != (info->flags & ~ASYNC_USR_MASK))) | |
2908 | return -EPERM; | |
2909 | info->flags = ((info->flags & ~ASYNC_USR_MASK) | | |
2910 | (new_serial.flags & ASYNC_USR_MASK)); | |
1da177e4 LT |
2911 | } else { |
2912 | /* | |
2913 | * OK, past this point, all the error checking has been done. | |
2914 | * At this point, we start making changes..... | |
2915 | */ | |
8ea2c2ec JJ |
2916 | info->flags = ((info->flags & ~ASYNC_FLAGS) | |
2917 | (new_serial.flags & ASYNC_FLAGS)); | |
1da177e4 LT |
2918 | info->close_delay = new_serial.close_delay * HZ / 100; |
2919 | info->closing_wait = new_serial.closing_wait * HZ / 100; | |
8ea2c2ec JJ |
2920 | info->tty->low_latency = |
2921 | (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; | |
2922 | info->tty->low_latency = 0; /* (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; */ | |
1da177e4 LT |
2923 | } |
2924 | ||
2925 | /* added by casper, 3/17/2000, for mouse */ | |
2926 | info->type = new_serial.type; | |
2927 | ||
2928 | process_txrx_fifo(info); | |
2929 | ||
1da177e4 LT |
2930 | if (info->flags & ASYNC_INITIALIZED) { |
2931 | if (flags != (info->flags & ASYNC_SPD_MASK)) { | |
2932 | mxser_change_speed(info, NULL); | |
2933 | } | |
2934 | } else { | |
2935 | retval = mxser_startup(info); | |
2936 | } | |
8ea2c2ec | 2937 | return retval; |
1da177e4 LT |
2938 | } |
2939 | ||
2940 | /* | |
2941 | * mxser_get_lsr_info - get line status register info | |
2942 | * | |
2943 | * Purpose: Let user call ioctl() to get info when the UART physically | |
2944 | * is emptied. On bus types like RS485, the transmitter must | |
2945 | * release the bus after transmitting. This must be done when | |
2946 | * the transmit shift register is empty, not be done when the | |
2947 | * transmit holding register is empty. This functionality | |
2948 | * allows an RS485 driver to be written in user space. | |
2949 | */ | |
2950 | static int mxser_get_lsr_info(struct mxser_struct *info, unsigned int __user *value) | |
2951 | { | |
2952 | unsigned char status; | |
2953 | unsigned int result; | |
2954 | unsigned long flags; | |
2955 | ||
2956 | spin_lock_irqsave(&info->slock, flags); | |
2957 | status = inb(info->base + UART_LSR); | |
2958 | spin_unlock_irqrestore(&info->slock, flags); | |
2959 | result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0); | |
2960 | return put_user(result, value); | |
2961 | } | |
2962 | ||
2963 | /* | |
2964 | * This routine sends a break character out the serial port. | |
2965 | */ | |
2966 | static void mxser_send_break(struct mxser_struct *info, int duration) | |
2967 | { | |
2968 | unsigned long flags; | |
2969 | ||
2970 | if (!info->base) | |
2971 | return; | |
2972 | set_current_state(TASK_INTERRUPTIBLE); | |
2973 | spin_lock_irqsave(&info->slock, flags); | |
8ea2c2ec JJ |
2974 | outb(inb(info->base + UART_LCR) | UART_LCR_SBC, |
2975 | info->base + UART_LCR); | |
1da177e4 LT |
2976 | spin_unlock_irqrestore(&info->slock, flags); |
2977 | schedule_timeout(duration); | |
2978 | spin_lock_irqsave(&info->slock, flags); | |
8ea2c2ec JJ |
2979 | outb(inb(info->base + UART_LCR) & ~UART_LCR_SBC, |
2980 | info->base + UART_LCR); | |
1da177e4 LT |
2981 | spin_unlock_irqrestore(&info->slock, flags); |
2982 | } | |
2983 | ||
2984 | static int mxser_tiocmget(struct tty_struct *tty, struct file *file) | |
2985 | { | |
56e139f6 | 2986 | struct mxser_struct *info = tty->driver_data; |
1da177e4 LT |
2987 | unsigned char control, status; |
2988 | unsigned long flags; | |
2989 | ||
2990 | ||
2991 | if (tty->index == MXSER_PORTS) | |
8ea2c2ec | 2992 | return -ENOIOCTLCMD; |
1da177e4 | 2993 | if (tty->flags & (1 << TTY_IO_ERROR)) |
8ea2c2ec | 2994 | return -EIO; |
1da177e4 LT |
2995 | |
2996 | control = info->MCR; | |
2997 | ||
2998 | spin_lock_irqsave(&info->slock, flags); | |
2999 | status = inb(info->base + UART_MSR); | |
3000 | if (status & UART_MSR_ANY_DELTA) | |
3001 | mxser_check_modem_status(info, status); | |
3002 | spin_unlock_irqrestore(&info->slock, flags); | |
3003 | return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) | | |
8ea2c2ec JJ |
3004 | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) | |
3005 | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) | | |
3006 | ((status & UART_MSR_RI) ? TIOCM_RNG : 0) | | |
3007 | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) | | |
3008 | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0); | |
1da177e4 LT |
3009 | } |
3010 | ||
3011 | static int mxser_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) | |
3012 | { | |
56e139f6 | 3013 | struct mxser_struct *info = tty->driver_data; |
1da177e4 LT |
3014 | unsigned long flags; |
3015 | ||
3016 | ||
3017 | if (tty->index == MXSER_PORTS) | |
3018 | return -ENOIOCTLCMD; | |
3019 | if (tty->flags & (1 << TTY_IO_ERROR)) | |
3020 | return -EIO; | |
3021 | ||
3022 | spin_lock_irqsave(&info->slock, flags); | |
3023 | ||
3024 | if (set & TIOCM_RTS) | |
3025 | info->MCR |= UART_MCR_RTS; | |
3026 | if (set & TIOCM_DTR) | |
3027 | info->MCR |= UART_MCR_DTR; | |
3028 | ||
3029 | if (clear & TIOCM_RTS) | |
3030 | info->MCR &= ~UART_MCR_RTS; | |
3031 | if (clear & TIOCM_DTR) | |
3032 | info->MCR &= ~UART_MCR_DTR; | |
3033 | ||
3034 | outb(info->MCR, info->base + UART_MCR); | |
3035 | spin_unlock_irqrestore(&info->slock, flags); | |
3036 | return 0; | |
3037 | } | |
3038 | ||
3039 | ||
3040 | static int mxser_read_register(int, unsigned short *); | |
3041 | static int mxser_program_mode(int); | |
3042 | static void mxser_normal_mode(int); | |
3043 | ||
3044 | static int mxser_get_ISA_conf(int cap, struct mxser_hwconf *hwconf) | |
3045 | { | |
3046 | int id, i, bits; | |
3047 | unsigned short regs[16], irq; | |
3048 | unsigned char scratch, scratch2; | |
3049 | ||
3050 | hwconf->IsMoxaMustChipFlag = MOXA_OTHER_UART; | |
3051 | ||
3052 | id = mxser_read_register(cap, regs); | |
3053 | if (id == C168_ASIC_ID) { | |
3054 | hwconf->board_type = MXSER_BOARD_C168_ISA; | |
3055 | hwconf->ports = 8; | |
3056 | } else if (id == C104_ASIC_ID) { | |
3057 | hwconf->board_type = MXSER_BOARD_C104_ISA; | |
3058 | hwconf->ports = 4; | |
3059 | } else if (id == C102_ASIC_ID) { | |
3060 | hwconf->board_type = MXSER_BOARD_C102_ISA; | |
3061 | hwconf->ports = 2; | |
3062 | } else if (id == CI132_ASIC_ID) { | |
3063 | hwconf->board_type = MXSER_BOARD_CI132; | |
3064 | hwconf->ports = 2; | |
3065 | } else if (id == CI134_ASIC_ID) { | |
3066 | hwconf->board_type = MXSER_BOARD_CI134; | |
3067 | hwconf->ports = 4; | |
3068 | } else if (id == CI104J_ASIC_ID) { | |
3069 | hwconf->board_type = MXSER_BOARD_CI104J; | |
3070 | hwconf->ports = 4; | |
3071 | } else | |
8ea2c2ec | 3072 | return 0; |
1da177e4 LT |
3073 | |
3074 | irq = 0; | |
3075 | if (hwconf->ports == 2) { | |
3076 | irq = regs[9] & 0xF000; | |
3077 | irq = irq | (irq >> 4); | |
3078 | if (irq != (regs[9] & 0xFF00)) | |
8ea2c2ec | 3079 | return MXSER_ERR_IRQ_CONFLIT; |
1da177e4 LT |
3080 | } else if (hwconf->ports == 4) { |
3081 | irq = regs[9] & 0xF000; | |
3082 | irq = irq | (irq >> 4); | |
3083 | irq = irq | (irq >> 8); | |
3084 | if (irq != regs[9]) | |
8ea2c2ec | 3085 | return MXSER_ERR_IRQ_CONFLIT; |
1da177e4 LT |
3086 | } else if (hwconf->ports == 8) { |
3087 | irq = regs[9] & 0xF000; | |
3088 | irq = irq | (irq >> 4); | |
3089 | irq = irq | (irq >> 8); | |
3090 | if ((irq != regs[9]) || (irq != regs[10])) | |
8ea2c2ec | 3091 | return MXSER_ERR_IRQ_CONFLIT; |
1da177e4 LT |
3092 | } |
3093 | ||
8ea2c2ec JJ |
3094 | if (!irq) |
3095 | return MXSER_ERR_IRQ; | |
3096 | hwconf->irq = ((int)(irq & 0xF000) >> 12); | |
1da177e4 LT |
3097 | for (i = 0; i < 8; i++) |
3098 | hwconf->ioaddr[i] = (int) regs[i + 1] & 0xFFF8; | |
8ea2c2ec JJ |
3099 | if ((regs[12] & 0x80) == 0) |
3100 | return MXSER_ERR_VECTOR; | |
3101 | hwconf->vector = (int)regs[11]; /* interrupt vector */ | |
1da177e4 LT |
3102 | if (id == 1) |
3103 | hwconf->vector_mask = 0x00FF; | |
3104 | else | |
3105 | hwconf->vector_mask = 0x000F; | |
3106 | for (i = 7, bits = 0x0100; i >= 0; i--, bits <<= 1) { | |
3107 | if (regs[12] & bits) { | |
3108 | hwconf->baud_base[i] = 921600; | |
8ea2c2ec | 3109 | hwconf->MaxCanSetBaudRate[i] = 921600; /* add by Victor Yu. 09-04-2002 */ |
1da177e4 LT |
3110 | } else { |
3111 | hwconf->baud_base[i] = 115200; | |
8ea2c2ec | 3112 | hwconf->MaxCanSetBaudRate[i] = 115200; /* add by Victor Yu. 09-04-2002 */ |
1da177e4 LT |
3113 | } |
3114 | } | |
3115 | scratch2 = inb(cap + UART_LCR) & (~UART_LCR_DLAB); | |
3116 | outb(scratch2 | UART_LCR_DLAB, cap + UART_LCR); | |
3117 | outb(0, cap + UART_EFR); /* EFR is the same as FCR */ | |
3118 | outb(scratch2, cap + UART_LCR); | |
3119 | outb(UART_FCR_ENABLE_FIFO, cap + UART_FCR); | |
3120 | scratch = inb(cap + UART_IIR); | |
3121 | ||
3122 | if (scratch & 0xC0) | |
3123 | hwconf->uart_type = PORT_16550A; | |
3124 | else | |
3125 | hwconf->uart_type = PORT_16450; | |
3126 | if (id == 1) | |
3127 | hwconf->ports = 8; | |
3128 | else | |
3129 | hwconf->ports = 4; | |
3130 | request_region(hwconf->ioaddr[0], 8 * hwconf->ports, "mxser(IO)"); | |
3131 | request_region(hwconf->vector, 1, "mxser(vector)"); | |
8ea2c2ec | 3132 | return hwconf->ports; |
1da177e4 LT |
3133 | } |
3134 | ||
3135 | #define CHIP_SK 0x01 /* Serial Data Clock in Eprom */ | |
3136 | #define CHIP_DO 0x02 /* Serial Data Output in Eprom */ | |
3137 | #define CHIP_CS 0x04 /* Serial Chip Select in Eprom */ | |
3138 | #define CHIP_DI 0x08 /* Serial Data Input in Eprom */ | |
3139 | #define EN_CCMD 0x000 /* Chip's command register */ | |
3140 | #define EN0_RSARLO 0x008 /* Remote start address reg 0 */ | |
3141 | #define EN0_RSARHI 0x009 /* Remote start address reg 1 */ | |
3142 | #define EN0_RCNTLO 0x00A /* Remote byte count reg WR */ | |
3143 | #define EN0_RCNTHI 0x00B /* Remote byte count reg WR */ | |
3144 | #define EN0_DCFG 0x00E /* Data configuration reg WR */ | |
3145 | #define EN0_PORT 0x010 /* Rcv missed frame error counter RD */ | |
3146 | #define ENC_PAGE0 0x000 /* Select page 0 of chip registers */ | |
3147 | #define ENC_PAGE3 0x0C0 /* Select page 3 of chip registers */ | |
3148 | static int mxser_read_register(int port, unsigned short *regs) | |
3149 | { | |
3150 | int i, k, value, id; | |
3151 | unsigned int j; | |
3152 | ||
3153 | id = mxser_program_mode(port); | |
3154 | if (id < 0) | |
8ea2c2ec | 3155 | return id; |
1da177e4 LT |
3156 | for (i = 0; i < 14; i++) { |
3157 | k = (i & 0x3F) | 0x180; | |
3158 | for (j = 0x100; j > 0; j >>= 1) { | |
3159 | outb(CHIP_CS, port); | |
3160 | if (k & j) { | |
3161 | outb(CHIP_CS | CHIP_DO, port); | |
3162 | outb(CHIP_CS | CHIP_DO | CHIP_SK, port); /* A? bit of read */ | |
3163 | } else { | |
3164 | outb(CHIP_CS, port); | |
3165 | outb(CHIP_CS | CHIP_SK, port); /* A? bit of read */ | |
3166 | } | |
3167 | } | |
8ea2c2ec | 3168 | (void)inb(port); |
1da177e4 LT |
3169 | value = 0; |
3170 | for (k = 0, j = 0x8000; k < 16; k++, j >>= 1) { | |
3171 | outb(CHIP_CS, port); | |
3172 | outb(CHIP_CS | CHIP_SK, port); | |
3173 | if (inb(port) & CHIP_DI) | |
3174 | value |= j; | |
3175 | } | |
3176 | regs[i] = value; | |
3177 | outb(0, port); | |
3178 | } | |
3179 | mxser_normal_mode(port); | |
8ea2c2ec | 3180 | return id; |
1da177e4 LT |
3181 | } |
3182 | ||
3183 | static int mxser_program_mode(int port) | |
3184 | { | |
3185 | int id, i, j, n; | |
8ea2c2ec | 3186 | /* unsigned long flags; */ |
1da177e4 LT |
3187 | |
3188 | spin_lock(&gm_lock); | |
3189 | outb(0, port); | |
3190 | outb(0, port); | |
3191 | outb(0, port); | |
8ea2c2ec JJ |
3192 | (void)inb(port); |
3193 | (void)inb(port); | |
1da177e4 | 3194 | outb(0, port); |
8ea2c2ec JJ |
3195 | (void)inb(port); |
3196 | /* restore_flags(flags); */ | |
1da177e4 LT |
3197 | spin_unlock(&gm_lock); |
3198 | ||
3199 | id = inb(port + 1) & 0x1F; | |
8ea2c2ec JJ |
3200 | if ((id != C168_ASIC_ID) && |
3201 | (id != C104_ASIC_ID) && | |
3202 | (id != C102_ASIC_ID) && | |
3203 | (id != CI132_ASIC_ID) && | |
3204 | (id != CI134_ASIC_ID) && | |
3205 | (id != CI104J_ASIC_ID)) | |
3206 | return -1; | |
1da177e4 LT |
3207 | for (i = 0, j = 0; i < 4; i++) { |
3208 | n = inb(port + 2); | |
3209 | if (n == 'M') { | |
3210 | j = 1; | |
3211 | } else if ((j == 1) && (n == 1)) { | |
3212 | j = 2; | |
3213 | break; | |
3214 | } else | |
3215 | j = 0; | |
3216 | } | |
3217 | if (j != 2) | |
3218 | id = -2; | |
8ea2c2ec | 3219 | return id; |
1da177e4 LT |
3220 | } |
3221 | ||
3222 | static void mxser_normal_mode(int port) | |
3223 | { | |
3224 | int i, n; | |
3225 | ||
3226 | outb(0xA5, port + 1); | |
3227 | outb(0x80, port + 3); | |
3228 | outb(12, port + 0); /* 9600 bps */ | |
3229 | outb(0, port + 1); | |
3230 | outb(0x03, port + 3); /* 8 data bits */ | |
3231 | outb(0x13, port + 4); /* loop back mode */ | |
3232 | for (i = 0; i < 16; i++) { | |
3233 | n = inb(port + 5); | |
3234 | if ((n & 0x61) == 0x60) | |
3235 | break; | |
3236 | if ((n & 1) == 1) | |
8ea2c2ec | 3237 | (void)inb(port); |
1da177e4 LT |
3238 | } |
3239 | outb(0x00, port + 4); | |
3240 | } | |
3241 | ||
3242 | module_init(mxser_module_init); | |
3243 | module_exit(mxser_module_exit); |