]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * linux/drivers/char/pcmcia/synclink_cs.c | |
3 | * | |
a7482a2e | 4 | * $Id: synclink_cs.c,v 4.34 2005/09/08 13:20:54 paulkf Exp $ |
1da177e4 LT |
5 | * |
6 | * Device driver for Microgate SyncLink PC Card | |
7 | * multiprotocol serial adapter. | |
8 | * | |
9 | * written by Paul Fulghum for Microgate Corporation | |
10 | * paulkf@microgate.com | |
11 | * | |
12 | * Microgate and SyncLink are trademarks of Microgate Corporation | |
13 | * | |
14 | * This code is released under the GNU General Public License (GPL) | |
15 | * | |
16 | * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED | |
17 | * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES | |
18 | * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
19 | * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, | |
20 | * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES | |
21 | * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
22 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
23 | * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | |
24 | * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) | |
25 | * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED | |
26 | * OF THE POSSIBILITY OF SUCH DAMAGE. | |
27 | */ | |
28 | ||
29 | #define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq)) | |
30 | #if defined(__i386__) | |
31 | # define BREAKPOINT() asm(" int $3"); | |
32 | #else | |
33 | # define BREAKPOINT() { } | |
34 | #endif | |
35 | ||
36 | #define MAX_DEVICE_COUNT 4 | |
37 | ||
38 | #include <linux/config.h> | |
39 | #include <linux/module.h> | |
40 | #include <linux/errno.h> | |
41 | #include <linux/signal.h> | |
42 | #include <linux/sched.h> | |
43 | #include <linux/timer.h> | |
44 | #include <linux/time.h> | |
45 | #include <linux/interrupt.h> | |
46 | #include <linux/pci.h> | |
47 | #include <linux/tty.h> | |
48 | #include <linux/tty_flip.h> | |
49 | #include <linux/serial.h> | |
50 | #include <linux/major.h> | |
51 | #include <linux/string.h> | |
52 | #include <linux/fcntl.h> | |
53 | #include <linux/ptrace.h> | |
54 | #include <linux/ioport.h> | |
55 | #include <linux/mm.h> | |
56 | #include <linux/slab.h> | |
57 | #include <linux/netdevice.h> | |
58 | #include <linux/vmalloc.h> | |
59 | #include <linux/init.h> | |
60 | #include <asm/serial.h> | |
61 | #include <linux/delay.h> | |
62 | #include <linux/ioctl.h> | |
63 | ||
64 | #include <asm/system.h> | |
65 | #include <asm/io.h> | |
66 | #include <asm/irq.h> | |
67 | #include <asm/dma.h> | |
68 | #include <linux/bitops.h> | |
69 | #include <asm/types.h> | |
70 | #include <linux/termios.h> | |
71 | #include <linux/workqueue.h> | |
72 | #include <linux/hdlc.h> | |
73 | ||
1da177e4 LT |
74 | #include <pcmcia/cs_types.h> |
75 | #include <pcmcia/cs.h> | |
76 | #include <pcmcia/cistpl.h> | |
77 | #include <pcmcia/cisreg.h> | |
78 | #include <pcmcia/ds.h> | |
79 | ||
80 | #ifdef CONFIG_HDLC_MODULE | |
81 | #define CONFIG_HDLC 1 | |
82 | #endif | |
83 | ||
84 | #define GET_USER(error,value,addr) error = get_user(value,addr) | |
85 | #define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0 | |
86 | #define PUT_USER(error,value,addr) error = put_user(value,addr) | |
87 | #define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0 | |
88 | ||
89 | #include <asm/uaccess.h> | |
90 | ||
91 | #include "linux/synclink.h" | |
92 | ||
93 | static MGSL_PARAMS default_params = { | |
94 | MGSL_MODE_HDLC, /* unsigned long mode */ | |
95 | 0, /* unsigned char loopback; */ | |
96 | HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */ | |
97 | HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */ | |
98 | 0, /* unsigned long clock_speed; */ | |
99 | 0xff, /* unsigned char addr_filter; */ | |
100 | HDLC_CRC_16_CCITT, /* unsigned short crc_type; */ | |
101 | HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */ | |
102 | HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */ | |
103 | 9600, /* unsigned long data_rate; */ | |
104 | 8, /* unsigned char data_bits; */ | |
105 | 1, /* unsigned char stop_bits; */ | |
106 | ASYNC_PARITY_NONE /* unsigned char parity; */ | |
107 | }; | |
108 | ||
109 | typedef struct | |
110 | { | |
111 | int count; | |
112 | unsigned char status; | |
113 | char data[1]; | |
114 | } RXBUF; | |
115 | ||
116 | /* The queue of BH actions to be performed */ | |
117 | ||
118 | #define BH_RECEIVE 1 | |
119 | #define BH_TRANSMIT 2 | |
120 | #define BH_STATUS 4 | |
121 | ||
122 | #define IO_PIN_SHUTDOWN_LIMIT 100 | |
123 | ||
124 | #define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) | |
125 | ||
126 | struct _input_signal_events { | |
127 | int ri_up; | |
128 | int ri_down; | |
129 | int dsr_up; | |
130 | int dsr_down; | |
131 | int dcd_up; | |
132 | int dcd_down; | |
133 | int cts_up; | |
134 | int cts_down; | |
135 | }; | |
136 | ||
137 | ||
138 | /* | |
139 | * Device instance data structure | |
140 | */ | |
141 | ||
142 | typedef struct _mgslpc_info { | |
143 | void *if_ptr; /* General purpose pointer (used by SPPP) */ | |
144 | int magic; | |
145 | int flags; | |
146 | int count; /* count of opens */ | |
147 | int line; | |
148 | unsigned short close_delay; | |
149 | unsigned short closing_wait; /* time to wait before closing */ | |
150 | ||
151 | struct mgsl_icount icount; | |
152 | ||
153 | struct tty_struct *tty; | |
154 | int timeout; | |
155 | int x_char; /* xon/xoff character */ | |
156 | int blocked_open; /* # of blocked opens */ | |
157 | unsigned char read_status_mask; | |
158 | unsigned char ignore_status_mask; | |
159 | ||
160 | unsigned char *tx_buf; | |
161 | int tx_put; | |
162 | int tx_get; | |
163 | int tx_count; | |
164 | ||
165 | /* circular list of fixed length rx buffers */ | |
166 | ||
167 | unsigned char *rx_buf; /* memory allocated for all rx buffers */ | |
168 | int rx_buf_total_size; /* size of memory allocated for rx buffers */ | |
169 | int rx_put; /* index of next empty rx buffer */ | |
170 | int rx_get; /* index of next full rx buffer */ | |
171 | int rx_buf_size; /* size in bytes of single rx buffer */ | |
172 | int rx_buf_count; /* total number of rx buffers */ | |
173 | int rx_frame_count; /* number of full rx buffers */ | |
174 | ||
175 | wait_queue_head_t open_wait; | |
176 | wait_queue_head_t close_wait; | |
177 | ||
178 | wait_queue_head_t status_event_wait_q; | |
179 | wait_queue_head_t event_wait_q; | |
180 | struct timer_list tx_timer; /* HDLC transmit timeout timer */ | |
181 | struct _mgslpc_info *next_device; /* device list link */ | |
182 | ||
183 | unsigned short imra_value; | |
184 | unsigned short imrb_value; | |
185 | unsigned char pim_value; | |
186 | ||
187 | spinlock_t lock; | |
188 | struct work_struct task; /* task structure for scheduling bh */ | |
189 | ||
190 | u32 max_frame_size; | |
191 | ||
192 | u32 pending_bh; | |
193 | ||
194 | int bh_running; | |
195 | int bh_requested; | |
196 | ||
197 | int dcd_chkcount; /* check counts to prevent */ | |
198 | int cts_chkcount; /* too many IRQs if a signal */ | |
199 | int dsr_chkcount; /* is floating */ | |
200 | int ri_chkcount; | |
201 | ||
202 | int rx_enabled; | |
203 | int rx_overflow; | |
204 | ||
205 | int tx_enabled; | |
206 | int tx_active; | |
207 | int tx_aborting; | |
208 | u32 idle_mode; | |
209 | ||
210 | int if_mode; /* serial interface selection (RS-232, v.35 etc) */ | |
211 | ||
212 | char device_name[25]; /* device instance name */ | |
213 | ||
214 | unsigned int io_base; /* base I/O address of adapter */ | |
215 | unsigned int irq_level; | |
216 | ||
217 | MGSL_PARAMS params; /* communications parameters */ | |
218 | ||
219 | unsigned char serial_signals; /* current serial signal states */ | |
220 | ||
221 | char irq_occurred; /* for diagnostics use */ | |
222 | char testing_irq; | |
223 | unsigned int init_error; /* startup error (DIAGS) */ | |
224 | ||
225 | char flag_buf[MAX_ASYNC_BUFFER_SIZE]; | |
226 | BOOLEAN drop_rts_on_tx_done; | |
227 | ||
228 | struct _input_signal_events input_signal_events; | |
229 | ||
230 | /* PCMCIA support */ | |
fd238232 | 231 | struct pcmcia_device *p_dev; |
1da177e4 LT |
232 | dev_node_t node; |
233 | int stop; | |
234 | ||
235 | /* SPPP/Cisco HDLC device parts */ | |
236 | int netcount; | |
237 | int dosyncppp; | |
238 | spinlock_t netlock; | |
239 | ||
240 | #ifdef CONFIG_HDLC | |
241 | struct net_device *netdev; | |
242 | #endif | |
243 | ||
244 | } MGSLPC_INFO; | |
245 | ||
246 | #define MGSLPC_MAGIC 0x5402 | |
247 | ||
248 | /* | |
249 | * The size of the serial xmit buffer is 1 page, or 4096 bytes | |
250 | */ | |
251 | #define TXBUFSIZE 4096 | |
252 | ||
253 | ||
254 | #define CHA 0x00 /* channel A offset */ | |
255 | #define CHB 0x40 /* channel B offset */ | |
256 | ||
257 | /* | |
258 | * FIXME: PPC has PVR defined in asm/reg.h. For now we just undef it. | |
259 | */ | |
260 | #undef PVR | |
261 | ||
262 | #define RXFIFO 0 | |
263 | #define TXFIFO 0 | |
264 | #define STAR 0x20 | |
265 | #define CMDR 0x20 | |
266 | #define RSTA 0x21 | |
267 | #define PRE 0x21 | |
268 | #define MODE 0x22 | |
269 | #define TIMR 0x23 | |
270 | #define XAD1 0x24 | |
271 | #define XAD2 0x25 | |
272 | #define RAH1 0x26 | |
273 | #define RAH2 0x27 | |
274 | #define DAFO 0x27 | |
275 | #define RAL1 0x28 | |
276 | #define RFC 0x28 | |
277 | #define RHCR 0x29 | |
278 | #define RAL2 0x29 | |
279 | #define RBCL 0x2a | |
280 | #define XBCL 0x2a | |
281 | #define RBCH 0x2b | |
282 | #define XBCH 0x2b | |
283 | #define CCR0 0x2c | |
284 | #define CCR1 0x2d | |
285 | #define CCR2 0x2e | |
286 | #define CCR3 0x2f | |
287 | #define VSTR 0x34 | |
288 | #define BGR 0x34 | |
289 | #define RLCR 0x35 | |
290 | #define AML 0x36 | |
291 | #define AMH 0x37 | |
292 | #define GIS 0x38 | |
293 | #define IVA 0x38 | |
294 | #define IPC 0x39 | |
295 | #define ISR 0x3a | |
296 | #define IMR 0x3a | |
297 | #define PVR 0x3c | |
298 | #define PIS 0x3d | |
299 | #define PIM 0x3d | |
300 | #define PCR 0x3e | |
301 | #define CCR4 0x3f | |
302 | ||
303 | // IMR/ISR | |
304 | ||
305 | #define IRQ_BREAK_ON BIT15 // rx break detected | |
306 | #define IRQ_DATAOVERRUN BIT14 // receive data overflow | |
307 | #define IRQ_ALLSENT BIT13 // all sent | |
308 | #define IRQ_UNDERRUN BIT12 // transmit data underrun | |
309 | #define IRQ_TIMER BIT11 // timer interrupt | |
310 | #define IRQ_CTS BIT10 // CTS status change | |
311 | #define IRQ_TXREPEAT BIT9 // tx message repeat | |
312 | #define IRQ_TXFIFO BIT8 // transmit pool ready | |
313 | #define IRQ_RXEOM BIT7 // receive message end | |
314 | #define IRQ_EXITHUNT BIT6 // receive frame start | |
315 | #define IRQ_RXTIME BIT6 // rx char timeout | |
316 | #define IRQ_DCD BIT2 // carrier detect status change | |
317 | #define IRQ_OVERRUN BIT1 // receive frame overflow | |
318 | #define IRQ_RXFIFO BIT0 // receive pool full | |
319 | ||
320 | // STAR | |
321 | ||
322 | #define XFW BIT6 // transmit FIFO write enable | |
323 | #define CEC BIT2 // command executing | |
324 | #define CTS BIT1 // CTS state | |
325 | ||
326 | #define PVR_DTR BIT0 | |
327 | #define PVR_DSR BIT1 | |
328 | #define PVR_RI BIT2 | |
329 | #define PVR_AUTOCTS BIT3 | |
330 | #define PVR_RS232 0x20 /* 0010b */ | |
331 | #define PVR_V35 0xe0 /* 1110b */ | |
332 | #define PVR_RS422 0x40 /* 0100b */ | |
333 | ||
334 | /* Register access functions */ | |
335 | ||
336 | #define write_reg(info, reg, val) outb((val),(info)->io_base + (reg)) | |
337 | #define read_reg(info, reg) inb((info)->io_base + (reg)) | |
338 | ||
339 | #define read_reg16(info, reg) inw((info)->io_base + (reg)) | |
340 | #define write_reg16(info, reg, val) outw((val), (info)->io_base + (reg)) | |
341 | ||
342 | #define set_reg_bits(info, reg, mask) \ | |
343 | write_reg(info, (reg), \ | |
344 | (unsigned char) (read_reg(info, (reg)) | (mask))) | |
345 | #define clear_reg_bits(info, reg, mask) \ | |
346 | write_reg(info, (reg), \ | |
347 | (unsigned char) (read_reg(info, (reg)) & ~(mask))) | |
348 | /* | |
349 | * interrupt enable/disable routines | |
350 | */ | |
351 | static void irq_disable(MGSLPC_INFO *info, unsigned char channel, unsigned short mask) | |
352 | { | |
353 | if (channel == CHA) { | |
354 | info->imra_value |= mask; | |
355 | write_reg16(info, CHA + IMR, info->imra_value); | |
356 | } else { | |
357 | info->imrb_value |= mask; | |
358 | write_reg16(info, CHB + IMR, info->imrb_value); | |
359 | } | |
360 | } | |
361 | static void irq_enable(MGSLPC_INFO *info, unsigned char channel, unsigned short mask) | |
362 | { | |
363 | if (channel == CHA) { | |
364 | info->imra_value &= ~mask; | |
365 | write_reg16(info, CHA + IMR, info->imra_value); | |
366 | } else { | |
367 | info->imrb_value &= ~mask; | |
368 | write_reg16(info, CHB + IMR, info->imrb_value); | |
369 | } | |
370 | } | |
371 | ||
372 | #define port_irq_disable(info, mask) \ | |
373 | { info->pim_value |= (mask); write_reg(info, PIM, info->pim_value); } | |
374 | ||
375 | #define port_irq_enable(info, mask) \ | |
376 | { info->pim_value &= ~(mask); write_reg(info, PIM, info->pim_value); } | |
377 | ||
378 | static void rx_start(MGSLPC_INFO *info); | |
379 | static void rx_stop(MGSLPC_INFO *info); | |
380 | ||
381 | static void tx_start(MGSLPC_INFO *info); | |
382 | static void tx_stop(MGSLPC_INFO *info); | |
383 | static void tx_set_idle(MGSLPC_INFO *info); | |
384 | ||
385 | static void get_signals(MGSLPC_INFO *info); | |
386 | static void set_signals(MGSLPC_INFO *info); | |
387 | ||
388 | static void reset_device(MGSLPC_INFO *info); | |
389 | ||
390 | static void hdlc_mode(MGSLPC_INFO *info); | |
391 | static void async_mode(MGSLPC_INFO *info); | |
392 | ||
393 | static void tx_timeout(unsigned long context); | |
394 | ||
395 | static int ioctl_common(MGSLPC_INFO *info, unsigned int cmd, unsigned long arg); | |
396 | ||
397 | #ifdef CONFIG_HDLC | |
398 | #define dev_to_port(D) (dev_to_hdlc(D)->priv) | |
399 | static void hdlcdev_tx_done(MGSLPC_INFO *info); | |
400 | static void hdlcdev_rx(MGSLPC_INFO *info, char *buf, int size); | |
401 | static int hdlcdev_init(MGSLPC_INFO *info); | |
402 | static void hdlcdev_exit(MGSLPC_INFO *info); | |
403 | #endif | |
404 | ||
405 | static void trace_block(MGSLPC_INFO *info,const char* data, int count, int xmit); | |
406 | ||
407 | static BOOLEAN register_test(MGSLPC_INFO *info); | |
408 | static BOOLEAN irq_test(MGSLPC_INFO *info); | |
409 | static int adapter_test(MGSLPC_INFO *info); | |
410 | ||
411 | static int claim_resources(MGSLPC_INFO *info); | |
412 | static void release_resources(MGSLPC_INFO *info); | |
413 | static void mgslpc_add_device(MGSLPC_INFO *info); | |
414 | static void mgslpc_remove_device(MGSLPC_INFO *info); | |
415 | ||
416 | static int rx_get_frame(MGSLPC_INFO *info); | |
417 | static void rx_reset_buffers(MGSLPC_INFO *info); | |
418 | static int rx_alloc_buffers(MGSLPC_INFO *info); | |
419 | static void rx_free_buffers(MGSLPC_INFO *info); | |
420 | ||
421 | static irqreturn_t mgslpc_isr(int irq, void *dev_id, struct pt_regs * regs); | |
422 | ||
423 | /* | |
424 | * Bottom half interrupt handlers | |
425 | */ | |
426 | static void bh_handler(void* Context); | |
427 | static void bh_transmit(MGSLPC_INFO *info); | |
428 | static void bh_status(MGSLPC_INFO *info); | |
429 | ||
430 | /* | |
431 | * ioctl handlers | |
432 | */ | |
433 | static int tiocmget(struct tty_struct *tty, struct file *file); | |
434 | static int tiocmset(struct tty_struct *tty, struct file *file, | |
435 | unsigned int set, unsigned int clear); | |
436 | static int get_stats(MGSLPC_INFO *info, struct mgsl_icount __user *user_icount); | |
437 | static int get_params(MGSLPC_INFO *info, MGSL_PARAMS __user *user_params); | |
438 | static int set_params(MGSLPC_INFO *info, MGSL_PARAMS __user *new_params); | |
439 | static int get_txidle(MGSLPC_INFO *info, int __user *idle_mode); | |
440 | static int set_txidle(MGSLPC_INFO *info, int idle_mode); | |
441 | static int set_txenable(MGSLPC_INFO *info, int enable); | |
442 | static int tx_abort(MGSLPC_INFO *info); | |
443 | static int set_rxenable(MGSLPC_INFO *info, int enable); | |
444 | static int wait_events(MGSLPC_INFO *info, int __user *mask); | |
445 | ||
446 | static MGSLPC_INFO *mgslpc_device_list = NULL; | |
447 | static int mgslpc_device_count = 0; | |
448 | ||
449 | /* | |
450 | * Set this param to non-zero to load eax with the | |
451 | * .text section address and breakpoint on module load. | |
452 | * This is useful for use with gdb and add-symbol-file command. | |
453 | */ | |
454 | static int break_on_load=0; | |
455 | ||
456 | /* | |
457 | * Driver major number, defaults to zero to get auto | |
458 | * assigned major number. May be forced as module parameter. | |
459 | */ | |
460 | static int ttymajor=0; | |
461 | ||
462 | static int debug_level = 0; | |
463 | static int maxframe[MAX_DEVICE_COUNT] = {0,}; | |
464 | static int dosyncppp[MAX_DEVICE_COUNT] = {1,1,1,1}; | |
465 | ||
466 | module_param(break_on_load, bool, 0); | |
467 | module_param(ttymajor, int, 0); | |
468 | module_param(debug_level, int, 0); | |
469 | module_param_array(maxframe, int, NULL, 0); | |
470 | module_param_array(dosyncppp, int, NULL, 0); | |
471 | ||
472 | MODULE_LICENSE("GPL"); | |
473 | ||
474 | static char *driver_name = "SyncLink PC Card driver"; | |
a7482a2e | 475 | static char *driver_version = "$Revision: 4.34 $"; |
1da177e4 LT |
476 | |
477 | static struct tty_driver *serial_driver; | |
478 | ||
479 | /* number of characters left in xmit buffer before we ask for more */ | |
480 | #define WAKEUP_CHARS 256 | |
481 | ||
482 | static void mgslpc_change_params(MGSLPC_INFO *info); | |
483 | static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout); | |
484 | ||
485 | /* PCMCIA prototypes */ | |
486 | ||
15b99ac1 | 487 | static int mgslpc_config(struct pcmcia_device *link); |
1da177e4 | 488 | static void mgslpc_release(u_long arg); |
cc3b4866 | 489 | static void mgslpc_detach(struct pcmcia_device *p_dev); |
1da177e4 | 490 | |
1da177e4 LT |
491 | /* |
492 | * 1st function defined in .text section. Calling this function in | |
493 | * init_module() followed by a breakpoint allows a remote debugger | |
494 | * (gdb) to get the .text address for the add-symbol-file command. | |
495 | * This allows remote debugging of dynamically loadable modules. | |
496 | */ | |
497 | static void* mgslpc_get_text_ptr(void) | |
498 | { | |
499 | return mgslpc_get_text_ptr; | |
500 | } | |
501 | ||
502 | /** | |
503 | * line discipline callback wrappers | |
504 | * | |
505 | * The wrappers maintain line discipline references | |
506 | * while calling into the line discipline. | |
507 | * | |
508 | * ldisc_flush_buffer - flush line discipline receive buffers | |
509 | * ldisc_receive_buf - pass receive data to line discipline | |
510 | */ | |
511 | ||
512 | static void ldisc_flush_buffer(struct tty_struct *tty) | |
513 | { | |
514 | struct tty_ldisc *ld = tty_ldisc_ref(tty); | |
515 | if (ld) { | |
516 | if (ld->flush_buffer) | |
517 | ld->flush_buffer(tty); | |
518 | tty_ldisc_deref(ld); | |
519 | } | |
520 | } | |
521 | ||
522 | static void ldisc_receive_buf(struct tty_struct *tty, | |
523 | const __u8 *data, char *flags, int count) | |
524 | { | |
525 | struct tty_ldisc *ld; | |
526 | if (!tty) | |
527 | return; | |
528 | ld = tty_ldisc_ref(tty); | |
529 | if (ld) { | |
530 | if (ld->receive_buf) | |
531 | ld->receive_buf(tty, data, flags, count); | |
532 | tty_ldisc_deref(ld); | |
533 | } | |
534 | } | |
535 | ||
15b99ac1 | 536 | static int mgslpc_probe(struct pcmcia_device *link) |
1da177e4 LT |
537 | { |
538 | MGSLPC_INFO *info; | |
15b99ac1 | 539 | int ret; |
fd238232 | 540 | |
1da177e4 LT |
541 | if (debug_level >= DEBUG_LEVEL_INFO) |
542 | printk("mgslpc_attach\n"); | |
fd238232 | 543 | |
1da177e4 LT |
544 | info = (MGSLPC_INFO *)kmalloc(sizeof(MGSLPC_INFO), GFP_KERNEL); |
545 | if (!info) { | |
546 | printk("Error can't allocate device instance data\n"); | |
f8cfa618 | 547 | return -ENOMEM; |
1da177e4 LT |
548 | } |
549 | ||
550 | memset(info, 0, sizeof(MGSLPC_INFO)); | |
551 | info->magic = MGSLPC_MAGIC; | |
552 | INIT_WORK(&info->task, bh_handler, info); | |
553 | info->max_frame_size = 4096; | |
554 | info->close_delay = 5*HZ/10; | |
555 | info->closing_wait = 30*HZ; | |
556 | init_waitqueue_head(&info->open_wait); | |
557 | init_waitqueue_head(&info->close_wait); | |
558 | init_waitqueue_head(&info->status_event_wait_q); | |
559 | init_waitqueue_head(&info->event_wait_q); | |
560 | spin_lock_init(&info->lock); | |
561 | spin_lock_init(&info->netlock); | |
562 | memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS)); | |
563 | info->idle_mode = HDLC_TXIDLE_FLAGS; | |
564 | info->imra_value = 0xffff; | |
565 | info->imrb_value = 0xffff; | |
566 | info->pim_value = 0xff; | |
567 | ||
fba395ee | 568 | info->p_dev = link; |
1da177e4 | 569 | link->priv = info; |
fd238232 | 570 | |
fba395ee | 571 | /* Initialize the struct pcmcia_device structure */ |
1da177e4 LT |
572 | |
573 | /* Interrupt setup */ | |
574 | link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; | |
0c7ab676 | 575 | link->irq.IRQInfo1 = IRQ_LEVEL_ID; |
1da177e4 | 576 | link->irq.Handler = NULL; |
fd238232 | 577 | |
1da177e4 | 578 | link->conf.Attributes = 0; |
1da177e4 LT |
579 | link->conf.IntType = INT_MEMORY_AND_IO; |
580 | ||
15b99ac1 DB |
581 | ret = mgslpc_config(link); |
582 | if (ret) | |
583 | return ret; | |
1da177e4 LT |
584 | |
585 | mgslpc_add_device(info); | |
586 | ||
f8cfa618 | 587 | return 0; |
1da177e4 LT |
588 | } |
589 | ||
590 | /* Card has been inserted. | |
591 | */ | |
592 | ||
593 | #define CS_CHECK(fn, ret) \ | |
594 | do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) | |
595 | ||
15b99ac1 | 596 | static int mgslpc_config(struct pcmcia_device *link) |
1da177e4 | 597 | { |
1da177e4 LT |
598 | MGSLPC_INFO *info = link->priv; |
599 | tuple_t tuple; | |
600 | cisparse_t parse; | |
601 | int last_fn, last_ret; | |
602 | u_char buf[64]; | |
1da177e4 LT |
603 | cistpl_cftable_entry_t dflt = { 0 }; |
604 | cistpl_cftable_entry_t *cfg; | |
605 | ||
606 | if (debug_level >= DEBUG_LEVEL_INFO) | |
607 | printk("mgslpc_config(0x%p)\n", link); | |
608 | ||
609 | /* read CONFIG tuple to find its configuration registers */ | |
610 | tuple.DesiredTuple = CISTPL_CONFIG; | |
611 | tuple.Attributes = 0; | |
612 | tuple.TupleData = buf; | |
613 | tuple.TupleDataMax = sizeof(buf); | |
614 | tuple.TupleOffset = 0; | |
fba395ee DB |
615 | CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); |
616 | CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple)); | |
617 | CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse)); | |
1da177e4 LT |
618 | link->conf.ConfigBase = parse.config.base; |
619 | link->conf.Present = parse.config.rmask[0]; | |
1da177e4 | 620 | |
1da177e4 LT |
621 | /* get CIS configuration entry */ |
622 | ||
623 | tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; | |
fba395ee | 624 | CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); |
1da177e4 LT |
625 | |
626 | cfg = &(parse.cftable_entry); | |
fba395ee DB |
627 | CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple)); |
628 | CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse)); | |
1da177e4 LT |
629 | |
630 | if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg; | |
631 | if (cfg->index == 0) | |
632 | goto cs_failed; | |
633 | ||
634 | link->conf.ConfigIndex = cfg->index; | |
635 | link->conf.Attributes |= CONF_ENABLE_IRQ; | |
636 | ||
637 | /* IO window settings */ | |
638 | link->io.NumPorts1 = 0; | |
639 | if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { | |
640 | cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; | |
641 | link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; | |
642 | if (!(io->flags & CISTPL_IO_8BIT)) | |
643 | link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; | |
644 | if (!(io->flags & CISTPL_IO_16BIT)) | |
645 | link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; | |
646 | link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; | |
647 | link->io.BasePort1 = io->win[0].base; | |
648 | link->io.NumPorts1 = io->win[0].len; | |
fba395ee | 649 | CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io)); |
1da177e4 LT |
650 | } |
651 | ||
652 | link->conf.Attributes = CONF_ENABLE_IRQ; | |
1da177e4 LT |
653 | link->conf.IntType = INT_MEMORY_AND_IO; |
654 | link->conf.ConfigIndex = 8; | |
655 | link->conf.Present = PRESENT_OPTION; | |
656 | ||
657 | link->irq.Attributes |= IRQ_HANDLE_PRESENT; | |
658 | link->irq.Handler = mgslpc_isr; | |
659 | link->irq.Instance = info; | |
fba395ee | 660 | CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); |
1da177e4 | 661 | |
fba395ee | 662 | CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); |
1da177e4 LT |
663 | |
664 | info->io_base = link->io.BasePort1; | |
665 | info->irq_level = link->irq.AssignedIRQ; | |
666 | ||
667 | /* add to linked list of devices */ | |
668 | sprintf(info->node.dev_name, "mgslpc0"); | |
669 | info->node.major = info->node.minor = 0; | |
fd238232 | 670 | link->dev_node = &info->node; |
1da177e4 LT |
671 | |
672 | printk(KERN_INFO "%s: index 0x%02x:", | |
673 | info->node.dev_name, link->conf.ConfigIndex); | |
674 | if (link->conf.Attributes & CONF_ENABLE_IRQ) | |
675 | printk(", irq %d", link->irq.AssignedIRQ); | |
676 | if (link->io.NumPorts1) | |
677 | printk(", io 0x%04x-0x%04x", link->io.BasePort1, | |
678 | link->io.BasePort1+link->io.NumPorts1-1); | |
679 | printk("\n"); | |
15b99ac1 | 680 | return 0; |
1da177e4 LT |
681 | |
682 | cs_failed: | |
fba395ee | 683 | cs_error(link, last_fn, last_ret); |
1da177e4 | 684 | mgslpc_release((u_long)link); |
15b99ac1 | 685 | return -ENODEV; |
1da177e4 LT |
686 | } |
687 | ||
688 | /* Card has been removed. | |
689 | * Unregister device and release PCMCIA configuration. | |
690 | * If device is open, postpone until it is closed. | |
691 | */ | |
692 | static void mgslpc_release(u_long arg) | |
693 | { | |
e2d40963 | 694 | struct pcmcia_device *link = (struct pcmcia_device *)arg; |
1da177e4 | 695 | |
e2d40963 DB |
696 | if (debug_level >= DEBUG_LEVEL_INFO) |
697 | printk("mgslpc_release(0x%p)\n", link); | |
1da177e4 | 698 | |
e2d40963 | 699 | pcmcia_disable_device(link); |
1da177e4 LT |
700 | } |
701 | ||
fba395ee | 702 | static void mgslpc_detach(struct pcmcia_device *link) |
1da177e4 | 703 | { |
e2d40963 DB |
704 | if (debug_level >= DEBUG_LEVEL_INFO) |
705 | printk("mgslpc_detach(0x%p)\n", link); | |
cc3b4866 | 706 | |
e2d40963 DB |
707 | ((MGSLPC_INFO *)link->priv)->stop = 1; |
708 | mgslpc_release((u_long)link); | |
1da177e4 | 709 | |
e2d40963 | 710 | mgslpc_remove_device((MGSLPC_INFO *)link->priv); |
1da177e4 LT |
711 | } |
712 | ||
fba395ee | 713 | static int mgslpc_suspend(struct pcmcia_device *link) |
98e4c28b | 714 | { |
98e4c28b DB |
715 | MGSLPC_INFO *info = link->priv; |
716 | ||
98e4c28b | 717 | info->stop = 1; |
98e4c28b DB |
718 | |
719 | return 0; | |
720 | } | |
721 | ||
fba395ee | 722 | static int mgslpc_resume(struct pcmcia_device *link) |
98e4c28b | 723 | { |
98e4c28b DB |
724 | MGSLPC_INFO *info = link->priv; |
725 | ||
98e4c28b DB |
726 | info->stop = 0; |
727 | ||
728 | return 0; | |
729 | } | |
730 | ||
731 | ||
1da177e4 LT |
732 | static inline int mgslpc_paranoia_check(MGSLPC_INFO *info, |
733 | char *name, const char *routine) | |
734 | { | |
735 | #ifdef MGSLPC_PARANOIA_CHECK | |
736 | static const char *badmagic = | |
737 | "Warning: bad magic number for mgsl struct (%s) in %s\n"; | |
738 | static const char *badinfo = | |
739 | "Warning: null mgslpc_info for (%s) in %s\n"; | |
740 | ||
741 | if (!info) { | |
742 | printk(badinfo, name, routine); | |
743 | return 1; | |
744 | } | |
745 | if (info->magic != MGSLPC_MAGIC) { | |
746 | printk(badmagic, name, routine); | |
747 | return 1; | |
748 | } | |
749 | #else | |
750 | if (!info) | |
751 | return 1; | |
752 | #endif | |
753 | return 0; | |
754 | } | |
755 | ||
756 | ||
757 | #define CMD_RXFIFO BIT7 // release current rx FIFO | |
758 | #define CMD_RXRESET BIT6 // receiver reset | |
759 | #define CMD_RXFIFO_READ BIT5 | |
760 | #define CMD_START_TIMER BIT4 | |
761 | #define CMD_TXFIFO BIT3 // release current tx FIFO | |
762 | #define CMD_TXEOM BIT1 // transmit end message | |
763 | #define CMD_TXRESET BIT0 // transmit reset | |
764 | ||
765 | static BOOLEAN wait_command_complete(MGSLPC_INFO *info, unsigned char channel) | |
766 | { | |
767 | int i = 0; | |
768 | /* wait for command completion */ | |
769 | while (read_reg(info, (unsigned char)(channel+STAR)) & BIT2) { | |
770 | udelay(1); | |
771 | if (i++ == 1000) | |
772 | return FALSE; | |
773 | } | |
774 | return TRUE; | |
775 | } | |
776 | ||
777 | static void issue_command(MGSLPC_INFO *info, unsigned char channel, unsigned char cmd) | |
778 | { | |
779 | wait_command_complete(info, channel); | |
780 | write_reg(info, (unsigned char) (channel + CMDR), cmd); | |
781 | } | |
782 | ||
783 | static void tx_pause(struct tty_struct *tty) | |
784 | { | |
785 | MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; | |
786 | unsigned long flags; | |
787 | ||
788 | if (mgslpc_paranoia_check(info, tty->name, "tx_pause")) | |
789 | return; | |
790 | if (debug_level >= DEBUG_LEVEL_INFO) | |
791 | printk("tx_pause(%s)\n",info->device_name); | |
792 | ||
793 | spin_lock_irqsave(&info->lock,flags); | |
794 | if (info->tx_enabled) | |
795 | tx_stop(info); | |
796 | spin_unlock_irqrestore(&info->lock,flags); | |
797 | } | |
798 | ||
799 | static void tx_release(struct tty_struct *tty) | |
800 | { | |
801 | MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; | |
802 | unsigned long flags; | |
803 | ||
804 | if (mgslpc_paranoia_check(info, tty->name, "tx_release")) | |
805 | return; | |
806 | if (debug_level >= DEBUG_LEVEL_INFO) | |
807 | printk("tx_release(%s)\n",info->device_name); | |
808 | ||
809 | spin_lock_irqsave(&info->lock,flags); | |
810 | if (!info->tx_enabled) | |
811 | tx_start(info); | |
812 | spin_unlock_irqrestore(&info->lock,flags); | |
813 | } | |
814 | ||
815 | /* Return next bottom half action to perform. | |
816 | * or 0 if nothing to do. | |
817 | */ | |
818 | static int bh_action(MGSLPC_INFO *info) | |
819 | { | |
820 | unsigned long flags; | |
821 | int rc = 0; | |
822 | ||
823 | spin_lock_irqsave(&info->lock,flags); | |
824 | ||
825 | if (info->pending_bh & BH_RECEIVE) { | |
826 | info->pending_bh &= ~BH_RECEIVE; | |
827 | rc = BH_RECEIVE; | |
828 | } else if (info->pending_bh & BH_TRANSMIT) { | |
829 | info->pending_bh &= ~BH_TRANSMIT; | |
830 | rc = BH_TRANSMIT; | |
831 | } else if (info->pending_bh & BH_STATUS) { | |
832 | info->pending_bh &= ~BH_STATUS; | |
833 | rc = BH_STATUS; | |
834 | } | |
835 | ||
836 | if (!rc) { | |
837 | /* Mark BH routine as complete */ | |
838 | info->bh_running = 0; | |
839 | info->bh_requested = 0; | |
840 | } | |
841 | ||
842 | spin_unlock_irqrestore(&info->lock,flags); | |
843 | ||
844 | return rc; | |
845 | } | |
846 | ||
cdaad343 | 847 | static void bh_handler(void* Context) |
1da177e4 LT |
848 | { |
849 | MGSLPC_INFO *info = (MGSLPC_INFO*)Context; | |
850 | int action; | |
851 | ||
852 | if (!info) | |
853 | return; | |
854 | ||
855 | if (debug_level >= DEBUG_LEVEL_BH) | |
856 | printk( "%s(%d):bh_handler(%s) entry\n", | |
857 | __FILE__,__LINE__,info->device_name); | |
858 | ||
859 | info->bh_running = 1; | |
860 | ||
861 | while((action = bh_action(info)) != 0) { | |
862 | ||
863 | /* Process work item */ | |
864 | if ( debug_level >= DEBUG_LEVEL_BH ) | |
865 | printk( "%s(%d):bh_handler() work item action=%d\n", | |
866 | __FILE__,__LINE__,action); | |
867 | ||
868 | switch (action) { | |
869 | ||
870 | case BH_RECEIVE: | |
871 | while(rx_get_frame(info)); | |
872 | break; | |
873 | case BH_TRANSMIT: | |
874 | bh_transmit(info); | |
875 | break; | |
876 | case BH_STATUS: | |
877 | bh_status(info); | |
878 | break; | |
879 | default: | |
880 | /* unknown work item ID */ | |
881 | printk("Unknown work item ID=%08X!\n", action); | |
882 | break; | |
883 | } | |
884 | } | |
885 | ||
886 | if (debug_level >= DEBUG_LEVEL_BH) | |
887 | printk( "%s(%d):bh_handler(%s) exit\n", | |
888 | __FILE__,__LINE__,info->device_name); | |
889 | } | |
890 | ||
cdaad343 | 891 | static void bh_transmit(MGSLPC_INFO *info) |
1da177e4 LT |
892 | { |
893 | struct tty_struct *tty = info->tty; | |
894 | if (debug_level >= DEBUG_LEVEL_BH) | |
895 | printk("bh_transmit() entry on %s\n", info->device_name); | |
896 | ||
897 | if (tty) { | |
898 | tty_wakeup(tty); | |
899 | wake_up_interruptible(&tty->write_wait); | |
900 | } | |
901 | } | |
902 | ||
cdaad343 | 903 | static void bh_status(MGSLPC_INFO *info) |
1da177e4 LT |
904 | { |
905 | info->ri_chkcount = 0; | |
906 | info->dsr_chkcount = 0; | |
907 | info->dcd_chkcount = 0; | |
908 | info->cts_chkcount = 0; | |
909 | } | |
910 | ||
911 | /* eom: non-zero = end of frame */ | |
912 | static void rx_ready_hdlc(MGSLPC_INFO *info, int eom) | |
913 | { | |
914 | unsigned char data[2]; | |
915 | unsigned char fifo_count, read_count, i; | |
916 | RXBUF *buf = (RXBUF*)(info->rx_buf + (info->rx_put * info->rx_buf_size)); | |
917 | ||
918 | if (debug_level >= DEBUG_LEVEL_ISR) | |
919 | printk("%s(%d):rx_ready_hdlc(eom=%d)\n",__FILE__,__LINE__,eom); | |
920 | ||
921 | if (!info->rx_enabled) | |
922 | return; | |
923 | ||
924 | if (info->rx_frame_count >= info->rx_buf_count) { | |
925 | /* no more free buffers */ | |
926 | issue_command(info, CHA, CMD_RXRESET); | |
927 | info->pending_bh |= BH_RECEIVE; | |
928 | info->rx_overflow = 1; | |
929 | info->icount.buf_overrun++; | |
930 | return; | |
931 | } | |
932 | ||
933 | if (eom) { | |
934 | /* end of frame, get FIFO count from RBCL register */ | |
935 | if (!(fifo_count = (unsigned char)(read_reg(info, CHA+RBCL) & 0x1f))) | |
936 | fifo_count = 32; | |
937 | } else | |
938 | fifo_count = 32; | |
939 | ||
940 | do { | |
941 | if (fifo_count == 1) { | |
942 | read_count = 1; | |
943 | data[0] = read_reg(info, CHA + RXFIFO); | |
944 | } else { | |
945 | read_count = 2; | |
946 | *((unsigned short *) data) = read_reg16(info, CHA + RXFIFO); | |
947 | } | |
948 | fifo_count -= read_count; | |
949 | if (!fifo_count && eom) | |
950 | buf->status = data[--read_count]; | |
951 | ||
952 | for (i = 0; i < read_count; i++) { | |
953 | if (buf->count >= info->max_frame_size) { | |
954 | /* frame too large, reset receiver and reset current buffer */ | |
955 | issue_command(info, CHA, CMD_RXRESET); | |
956 | buf->count = 0; | |
957 | return; | |
958 | } | |
959 | *(buf->data + buf->count) = data[i]; | |
960 | buf->count++; | |
961 | } | |
962 | } while (fifo_count); | |
963 | ||
964 | if (eom) { | |
965 | info->pending_bh |= BH_RECEIVE; | |
966 | info->rx_frame_count++; | |
967 | info->rx_put++; | |
968 | if (info->rx_put >= info->rx_buf_count) | |
969 | info->rx_put = 0; | |
970 | } | |
971 | issue_command(info, CHA, CMD_RXFIFO); | |
972 | } | |
973 | ||
974 | static void rx_ready_async(MGSLPC_INFO *info, int tcd) | |
975 | { | |
33f0f88f | 976 | unsigned char data, status, flag; |
1da177e4 | 977 | int fifo_count; |
33f0f88f | 978 | int work = 0; |
1da177e4 LT |
979 | struct tty_struct *tty = info->tty; |
980 | struct mgsl_icount *icount = &info->icount; | |
981 | ||
982 | if (tcd) { | |
983 | /* early termination, get FIFO count from RBCL register */ | |
984 | fifo_count = (unsigned char)(read_reg(info, CHA+RBCL) & 0x1f); | |
985 | ||
986 | /* Zero fifo count could mean 0 or 32 bytes available. | |
987 | * If BIT5 of STAR is set then at least 1 byte is available. | |
988 | */ | |
989 | if (!fifo_count && (read_reg(info,CHA+STAR) & BIT5)) | |
990 | fifo_count = 32; | |
991 | } else | |
992 | fifo_count = 32; | |
33f0f88f AC |
993 | |
994 | tty_buffer_request_room(tty, fifo_count); | |
1da177e4 LT |
995 | /* Flush received async data to receive data buffer. */ |
996 | while (fifo_count) { | |
997 | data = read_reg(info, CHA + RXFIFO); | |
998 | status = read_reg(info, CHA + RXFIFO); | |
999 | fifo_count -= 2; | |
1000 | ||
1da177e4 | 1001 | icount->rx++; |
33f0f88f | 1002 | flag = TTY_NORMAL; |
1da177e4 LT |
1003 | |
1004 | // if no frameing/crc error then save data | |
1005 | // BIT7:parity error | |
1006 | // BIT6:framing error | |
1007 | ||
1008 | if (status & (BIT7 + BIT6)) { | |
1009 | if (status & BIT7) | |
1010 | icount->parity++; | |
1011 | else | |
1012 | icount->frame++; | |
1013 | ||
1014 | /* discard char if tty control flags say so */ | |
1015 | if (status & info->ignore_status_mask) | |
1016 | continue; | |
1017 | ||
1018 | status &= info->read_status_mask; | |
1019 | ||
1020 | if (status & BIT7) | |
33f0f88f | 1021 | flag = TTY_PARITY; |
1da177e4 | 1022 | else if (status & BIT6) |
33f0f88f | 1023 | flag = TTY_FRAME; |
1da177e4 | 1024 | } |
33f0f88f | 1025 | work += tty_insert_flip_char(tty, data, flag); |
1da177e4 LT |
1026 | } |
1027 | issue_command(info, CHA, CMD_RXFIFO); | |
1028 | ||
1029 | if (debug_level >= DEBUG_LEVEL_ISR) { | |
33f0f88f AC |
1030 | printk("%s(%d):rx_ready_async", |
1031 | __FILE__,__LINE__); | |
1da177e4 LT |
1032 | printk("%s(%d):rx=%d brk=%d parity=%d frame=%d overrun=%d\n", |
1033 | __FILE__,__LINE__,icount->rx,icount->brk, | |
1034 | icount->parity,icount->frame,icount->overrun); | |
1035 | } | |
1036 | ||
33f0f88f | 1037 | if (work) |
1da177e4 LT |
1038 | tty_flip_buffer_push(tty); |
1039 | } | |
1040 | ||
1041 | ||
1042 | static void tx_done(MGSLPC_INFO *info) | |
1043 | { | |
1044 | if (!info->tx_active) | |
1045 | return; | |
1046 | ||
1047 | info->tx_active = 0; | |
1048 | info->tx_aborting = 0; | |
1049 | ||
1050 | if (info->params.mode == MGSL_MODE_ASYNC) | |
1051 | return; | |
1052 | ||
1053 | info->tx_count = info->tx_put = info->tx_get = 0; | |
1054 | del_timer(&info->tx_timer); | |
1055 | ||
1056 | if (info->drop_rts_on_tx_done) { | |
1057 | get_signals(info); | |
1058 | if (info->serial_signals & SerialSignal_RTS) { | |
1059 | info->serial_signals &= ~SerialSignal_RTS; | |
1060 | set_signals(info); | |
1061 | } | |
1062 | info->drop_rts_on_tx_done = 0; | |
1063 | } | |
1064 | ||
1065 | #ifdef CONFIG_HDLC | |
1066 | if (info->netcount) | |
1067 | hdlcdev_tx_done(info); | |
1068 | else | |
1069 | #endif | |
1070 | { | |
1071 | if (info->tty->stopped || info->tty->hw_stopped) { | |
1072 | tx_stop(info); | |
1073 | return; | |
1074 | } | |
1075 | info->pending_bh |= BH_TRANSMIT; | |
1076 | } | |
1077 | } | |
1078 | ||
1079 | static void tx_ready(MGSLPC_INFO *info) | |
1080 | { | |
1081 | unsigned char fifo_count = 32; | |
1082 | int c; | |
1083 | ||
1084 | if (debug_level >= DEBUG_LEVEL_ISR) | |
1085 | printk("%s(%d):tx_ready(%s)\n", __FILE__,__LINE__,info->device_name); | |
1086 | ||
1087 | if (info->params.mode == MGSL_MODE_HDLC) { | |
1088 | if (!info->tx_active) | |
1089 | return; | |
1090 | } else { | |
1091 | if (info->tty->stopped || info->tty->hw_stopped) { | |
1092 | tx_stop(info); | |
1093 | return; | |
1094 | } | |
1095 | if (!info->tx_count) | |
1096 | info->tx_active = 0; | |
1097 | } | |
1098 | ||
1099 | if (!info->tx_count) | |
1100 | return; | |
1101 | ||
1102 | while (info->tx_count && fifo_count) { | |
1103 | c = min(2, min_t(int, fifo_count, min(info->tx_count, TXBUFSIZE - info->tx_get))); | |
1104 | ||
1105 | if (c == 1) { | |
1106 | write_reg(info, CHA + TXFIFO, *(info->tx_buf + info->tx_get)); | |
1107 | } else { | |
1108 | write_reg16(info, CHA + TXFIFO, | |
1109 | *((unsigned short*)(info->tx_buf + info->tx_get))); | |
1110 | } | |
1111 | info->tx_count -= c; | |
1112 | info->tx_get = (info->tx_get + c) & (TXBUFSIZE - 1); | |
1113 | fifo_count -= c; | |
1114 | } | |
1115 | ||
1116 | if (info->params.mode == MGSL_MODE_ASYNC) { | |
1117 | if (info->tx_count < WAKEUP_CHARS) | |
1118 | info->pending_bh |= BH_TRANSMIT; | |
1119 | issue_command(info, CHA, CMD_TXFIFO); | |
1120 | } else { | |
1121 | if (info->tx_count) | |
1122 | issue_command(info, CHA, CMD_TXFIFO); | |
1123 | else | |
1124 | issue_command(info, CHA, CMD_TXFIFO + CMD_TXEOM); | |
1125 | } | |
1126 | } | |
1127 | ||
1128 | static void cts_change(MGSLPC_INFO *info) | |
1129 | { | |
1130 | get_signals(info); | |
1131 | if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) | |
1132 | irq_disable(info, CHB, IRQ_CTS); | |
1133 | info->icount.cts++; | |
1134 | if (info->serial_signals & SerialSignal_CTS) | |
1135 | info->input_signal_events.cts_up++; | |
1136 | else | |
1137 | info->input_signal_events.cts_down++; | |
1138 | wake_up_interruptible(&info->status_event_wait_q); | |
1139 | wake_up_interruptible(&info->event_wait_q); | |
1140 | ||
1141 | if (info->flags & ASYNC_CTS_FLOW) { | |
1142 | if (info->tty->hw_stopped) { | |
1143 | if (info->serial_signals & SerialSignal_CTS) { | |
1144 | if (debug_level >= DEBUG_LEVEL_ISR) | |
1145 | printk("CTS tx start..."); | |
1146 | if (info->tty) | |
1147 | info->tty->hw_stopped = 0; | |
1148 | tx_start(info); | |
1149 | info->pending_bh |= BH_TRANSMIT; | |
1150 | return; | |
1151 | } | |
1152 | } else { | |
1153 | if (!(info->serial_signals & SerialSignal_CTS)) { | |
1154 | if (debug_level >= DEBUG_LEVEL_ISR) | |
1155 | printk("CTS tx stop..."); | |
1156 | if (info->tty) | |
1157 | info->tty->hw_stopped = 1; | |
1158 | tx_stop(info); | |
1159 | } | |
1160 | } | |
1161 | } | |
1162 | info->pending_bh |= BH_STATUS; | |
1163 | } | |
1164 | ||
1165 | static void dcd_change(MGSLPC_INFO *info) | |
1166 | { | |
1167 | get_signals(info); | |
1168 | if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) | |
1169 | irq_disable(info, CHB, IRQ_DCD); | |
1170 | info->icount.dcd++; | |
1171 | if (info->serial_signals & SerialSignal_DCD) { | |
1172 | info->input_signal_events.dcd_up++; | |
1173 | } | |
1174 | else | |
1175 | info->input_signal_events.dcd_down++; | |
1176 | #ifdef CONFIG_HDLC | |
fbeff3c1 KH |
1177 | if (info->netcount) { |
1178 | if (info->serial_signals & SerialSignal_DCD) | |
1179 | netif_carrier_on(info->netdev); | |
1180 | else | |
1181 | netif_carrier_off(info->netdev); | |
1182 | } | |
1da177e4 LT |
1183 | #endif |
1184 | wake_up_interruptible(&info->status_event_wait_q); | |
1185 | wake_up_interruptible(&info->event_wait_q); | |
1186 | ||
1187 | if (info->flags & ASYNC_CHECK_CD) { | |
1188 | if (debug_level >= DEBUG_LEVEL_ISR) | |
1189 | printk("%s CD now %s...", info->device_name, | |
1190 | (info->serial_signals & SerialSignal_DCD) ? "on" : "off"); | |
1191 | if (info->serial_signals & SerialSignal_DCD) | |
1192 | wake_up_interruptible(&info->open_wait); | |
1193 | else { | |
1194 | if (debug_level >= DEBUG_LEVEL_ISR) | |
1195 | printk("doing serial hangup..."); | |
1196 | if (info->tty) | |
1197 | tty_hangup(info->tty); | |
1198 | } | |
1199 | } | |
1200 | info->pending_bh |= BH_STATUS; | |
1201 | } | |
1202 | ||
1203 | static void dsr_change(MGSLPC_INFO *info) | |
1204 | { | |
1205 | get_signals(info); | |
1206 | if ((info->dsr_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) | |
1207 | port_irq_disable(info, PVR_DSR); | |
1208 | info->icount.dsr++; | |
1209 | if (info->serial_signals & SerialSignal_DSR) | |
1210 | info->input_signal_events.dsr_up++; | |
1211 | else | |
1212 | info->input_signal_events.dsr_down++; | |
1213 | wake_up_interruptible(&info->status_event_wait_q); | |
1214 | wake_up_interruptible(&info->event_wait_q); | |
1215 | info->pending_bh |= BH_STATUS; | |
1216 | } | |
1217 | ||
1218 | static void ri_change(MGSLPC_INFO *info) | |
1219 | { | |
1220 | get_signals(info); | |
1221 | if ((info->ri_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) | |
1222 | port_irq_disable(info, PVR_RI); | |
1223 | info->icount.rng++; | |
1224 | if (info->serial_signals & SerialSignal_RI) | |
1225 | info->input_signal_events.ri_up++; | |
1226 | else | |
1227 | info->input_signal_events.ri_down++; | |
1228 | wake_up_interruptible(&info->status_event_wait_q); | |
1229 | wake_up_interruptible(&info->event_wait_q); | |
1230 | info->pending_bh |= BH_STATUS; | |
1231 | } | |
1232 | ||
1233 | /* Interrupt service routine entry point. | |
1234 | * | |
1235 | * Arguments: | |
1236 | * | |
1237 | * irq interrupt number that caused interrupt | |
1238 | * dev_id device ID supplied during interrupt registration | |
1239 | * regs interrupted processor context | |
1240 | */ | |
1241 | static irqreturn_t mgslpc_isr(int irq, void *dev_id, struct pt_regs * regs) | |
1242 | { | |
1243 | MGSLPC_INFO * info = (MGSLPC_INFO *)dev_id; | |
1244 | unsigned short isr; | |
1245 | unsigned char gis, pis; | |
1246 | int count=0; | |
1247 | ||
1248 | if (debug_level >= DEBUG_LEVEL_ISR) | |
1249 | printk("mgslpc_isr(%d) entry.\n", irq); | |
1250 | if (!info) | |
1251 | return IRQ_NONE; | |
1252 | ||
e2d40963 | 1253 | if (!(info->p_dev->_locked)) |
1da177e4 LT |
1254 | return IRQ_HANDLED; |
1255 | ||
1256 | spin_lock(&info->lock); | |
1257 | ||
1258 | while ((gis = read_reg(info, CHA + GIS))) { | |
1259 | if (debug_level >= DEBUG_LEVEL_ISR) | |
1260 | printk("mgslpc_isr %s gis=%04X\n", info->device_name,gis); | |
1261 | ||
1262 | if ((gis & 0x70) || count > 1000) { | |
1263 | printk("synclink_cs:hardware failed or ejected\n"); | |
1264 | break; | |
1265 | } | |
1266 | count++; | |
1267 | ||
1268 | if (gis & (BIT1 + BIT0)) { | |
1269 | isr = read_reg16(info, CHB + ISR); | |
1270 | if (isr & IRQ_DCD) | |
1271 | dcd_change(info); | |
1272 | if (isr & IRQ_CTS) | |
1273 | cts_change(info); | |
1274 | } | |
1275 | if (gis & (BIT3 + BIT2)) | |
1276 | { | |
1277 | isr = read_reg16(info, CHA + ISR); | |
1278 | if (isr & IRQ_TIMER) { | |
1279 | info->irq_occurred = 1; | |
1280 | irq_disable(info, CHA, IRQ_TIMER); | |
1281 | } | |
1282 | ||
1283 | /* receive IRQs */ | |
1284 | if (isr & IRQ_EXITHUNT) { | |
1285 | info->icount.exithunt++; | |
1286 | wake_up_interruptible(&info->event_wait_q); | |
1287 | } | |
1288 | if (isr & IRQ_BREAK_ON) { | |
1289 | info->icount.brk++; | |
1290 | if (info->flags & ASYNC_SAK) | |
1291 | do_SAK(info->tty); | |
1292 | } | |
1293 | if (isr & IRQ_RXTIME) { | |
1294 | issue_command(info, CHA, CMD_RXFIFO_READ); | |
1295 | } | |
1296 | if (isr & (IRQ_RXEOM + IRQ_RXFIFO)) { | |
1297 | if (info->params.mode == MGSL_MODE_HDLC) | |
1298 | rx_ready_hdlc(info, isr & IRQ_RXEOM); | |
1299 | else | |
1300 | rx_ready_async(info, isr & IRQ_RXEOM); | |
1301 | } | |
1302 | ||
1303 | /* transmit IRQs */ | |
1304 | if (isr & IRQ_UNDERRUN) { | |
1305 | if (info->tx_aborting) | |
1306 | info->icount.txabort++; | |
1307 | else | |
1308 | info->icount.txunder++; | |
1309 | tx_done(info); | |
1310 | } | |
1311 | else if (isr & IRQ_ALLSENT) { | |
1312 | info->icount.txok++; | |
1313 | tx_done(info); | |
1314 | } | |
1315 | else if (isr & IRQ_TXFIFO) | |
1316 | tx_ready(info); | |
1317 | } | |
1318 | if (gis & BIT7) { | |
1319 | pis = read_reg(info, CHA + PIS); | |
1320 | if (pis & BIT1) | |
1321 | dsr_change(info); | |
1322 | if (pis & BIT2) | |
1323 | ri_change(info); | |
1324 | } | |
1325 | } | |
1326 | ||
1327 | /* Request bottom half processing if there's something | |
1328 | * for it to do and the bh is not already running | |
1329 | */ | |
1330 | ||
1331 | if (info->pending_bh && !info->bh_running && !info->bh_requested) { | |
1332 | if ( debug_level >= DEBUG_LEVEL_ISR ) | |
1333 | printk("%s(%d):%s queueing bh task.\n", | |
1334 | __FILE__,__LINE__,info->device_name); | |
1335 | schedule_work(&info->task); | |
1336 | info->bh_requested = 1; | |
1337 | } | |
1338 | ||
1339 | spin_unlock(&info->lock); | |
1340 | ||
1341 | if (debug_level >= DEBUG_LEVEL_ISR) | |
1342 | printk("%s(%d):mgslpc_isr(%d)exit.\n", | |
1343 | __FILE__,__LINE__,irq); | |
1344 | ||
1345 | return IRQ_HANDLED; | |
1346 | } | |
1347 | ||
1348 | /* Initialize and start device. | |
1349 | */ | |
1350 | static int startup(MGSLPC_INFO * info) | |
1351 | { | |
1352 | int retval = 0; | |
1353 | ||
1354 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1355 | printk("%s(%d):startup(%s)\n",__FILE__,__LINE__,info->device_name); | |
1356 | ||
1357 | if (info->flags & ASYNC_INITIALIZED) | |
1358 | return 0; | |
1359 | ||
1360 | if (!info->tx_buf) { | |
1361 | /* allocate a page of memory for a transmit buffer */ | |
1362 | info->tx_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL); | |
1363 | if (!info->tx_buf) { | |
1364 | printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n", | |
1365 | __FILE__,__LINE__,info->device_name); | |
1366 | return -ENOMEM; | |
1367 | } | |
1368 | } | |
1369 | ||
1370 | info->pending_bh = 0; | |
1371 | ||
a7482a2e PF |
1372 | memset(&info->icount, 0, sizeof(info->icount)); |
1373 | ||
1da177e4 LT |
1374 | init_timer(&info->tx_timer); |
1375 | info->tx_timer.data = (unsigned long)info; | |
1376 | info->tx_timer.function = tx_timeout; | |
1377 | ||
1378 | /* Allocate and claim adapter resources */ | |
1379 | retval = claim_resources(info); | |
1380 | ||
1381 | /* perform existance check and diagnostics */ | |
1382 | if ( !retval ) | |
1383 | retval = adapter_test(info); | |
1384 | ||
1385 | if ( retval ) { | |
1386 | if (capable(CAP_SYS_ADMIN) && info->tty) | |
1387 | set_bit(TTY_IO_ERROR, &info->tty->flags); | |
1388 | release_resources(info); | |
1389 | return retval; | |
1390 | } | |
1391 | ||
1392 | /* program hardware for current parameters */ | |
1393 | mgslpc_change_params(info); | |
1394 | ||
1395 | if (info->tty) | |
1396 | clear_bit(TTY_IO_ERROR, &info->tty->flags); | |
1397 | ||
1398 | info->flags |= ASYNC_INITIALIZED; | |
1399 | ||
1400 | return 0; | |
1401 | } | |
1402 | ||
1403 | /* Called by mgslpc_close() and mgslpc_hangup() to shutdown hardware | |
1404 | */ | |
1405 | static void shutdown(MGSLPC_INFO * info) | |
1406 | { | |
1407 | unsigned long flags; | |
1408 | ||
1409 | if (!(info->flags & ASYNC_INITIALIZED)) | |
1410 | return; | |
1411 | ||
1412 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1413 | printk("%s(%d):mgslpc_shutdown(%s)\n", | |
1414 | __FILE__,__LINE__, info->device_name ); | |
1415 | ||
1416 | /* clear status wait queue because status changes */ | |
1417 | /* can't happen after shutting down the hardware */ | |
1418 | wake_up_interruptible(&info->status_event_wait_q); | |
1419 | wake_up_interruptible(&info->event_wait_q); | |
1420 | ||
1421 | del_timer(&info->tx_timer); | |
1422 | ||
1423 | if (info->tx_buf) { | |
1424 | free_page((unsigned long) info->tx_buf); | |
1425 | info->tx_buf = NULL; | |
1426 | } | |
1427 | ||
1428 | spin_lock_irqsave(&info->lock,flags); | |
1429 | ||
1430 | rx_stop(info); | |
1431 | tx_stop(info); | |
1432 | ||
1433 | /* TODO:disable interrupts instead of reset to preserve signal states */ | |
1434 | reset_device(info); | |
1435 | ||
1436 | if (!info->tty || info->tty->termios->c_cflag & HUPCL) { | |
1437 | info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS); | |
1438 | set_signals(info); | |
1439 | } | |
1440 | ||
1441 | spin_unlock_irqrestore(&info->lock,flags); | |
1442 | ||
1443 | release_resources(info); | |
1444 | ||
1445 | if (info->tty) | |
1446 | set_bit(TTY_IO_ERROR, &info->tty->flags); | |
1447 | ||
1448 | info->flags &= ~ASYNC_INITIALIZED; | |
1449 | } | |
1450 | ||
1451 | static void mgslpc_program_hw(MGSLPC_INFO *info) | |
1452 | { | |
1453 | unsigned long flags; | |
1454 | ||
1455 | spin_lock_irqsave(&info->lock,flags); | |
1456 | ||
1457 | rx_stop(info); | |
1458 | tx_stop(info); | |
1459 | info->tx_count = info->tx_put = info->tx_get = 0; | |
1460 | ||
1461 | if (info->params.mode == MGSL_MODE_HDLC || info->netcount) | |
1462 | hdlc_mode(info); | |
1463 | else | |
1464 | async_mode(info); | |
1465 | ||
1466 | set_signals(info); | |
1467 | ||
1468 | info->dcd_chkcount = 0; | |
1469 | info->cts_chkcount = 0; | |
1470 | info->ri_chkcount = 0; | |
1471 | info->dsr_chkcount = 0; | |
1472 | ||
1473 | irq_enable(info, CHB, IRQ_DCD | IRQ_CTS); | |
1474 | port_irq_enable(info, (unsigned char) PVR_DSR | PVR_RI); | |
1475 | get_signals(info); | |
1476 | ||
1477 | if (info->netcount || info->tty->termios->c_cflag & CREAD) | |
1478 | rx_start(info); | |
1479 | ||
1480 | spin_unlock_irqrestore(&info->lock,flags); | |
1481 | } | |
1482 | ||
1483 | /* Reconfigure adapter based on new parameters | |
1484 | */ | |
1485 | static void mgslpc_change_params(MGSLPC_INFO *info) | |
1486 | { | |
1487 | unsigned cflag; | |
1488 | int bits_per_char; | |
1489 | ||
1490 | if (!info->tty || !info->tty->termios) | |
1491 | return; | |
1492 | ||
1493 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1494 | printk("%s(%d):mgslpc_change_params(%s)\n", | |
1495 | __FILE__,__LINE__, info->device_name ); | |
1496 | ||
1497 | cflag = info->tty->termios->c_cflag; | |
1498 | ||
1499 | /* if B0 rate (hangup) specified then negate DTR and RTS */ | |
1500 | /* otherwise assert DTR and RTS */ | |
1501 | if (cflag & CBAUD) | |
1502 | info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; | |
1503 | else | |
1504 | info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); | |
1505 | ||
1506 | /* byte size and parity */ | |
1507 | ||
1508 | switch (cflag & CSIZE) { | |
1509 | case CS5: info->params.data_bits = 5; break; | |
1510 | case CS6: info->params.data_bits = 6; break; | |
1511 | case CS7: info->params.data_bits = 7; break; | |
1512 | case CS8: info->params.data_bits = 8; break; | |
1513 | default: info->params.data_bits = 7; break; | |
1514 | } | |
1515 | ||
1516 | if (cflag & CSTOPB) | |
1517 | info->params.stop_bits = 2; | |
1518 | else | |
1519 | info->params.stop_bits = 1; | |
1520 | ||
1521 | info->params.parity = ASYNC_PARITY_NONE; | |
1522 | if (cflag & PARENB) { | |
1523 | if (cflag & PARODD) | |
1524 | info->params.parity = ASYNC_PARITY_ODD; | |
1525 | else | |
1526 | info->params.parity = ASYNC_PARITY_EVEN; | |
1527 | #ifdef CMSPAR | |
1528 | if (cflag & CMSPAR) | |
1529 | info->params.parity = ASYNC_PARITY_SPACE; | |
1530 | #endif | |
1531 | } | |
1532 | ||
1533 | /* calculate number of jiffies to transmit a full | |
1534 | * FIFO (32 bytes) at specified data rate | |
1535 | */ | |
1536 | bits_per_char = info->params.data_bits + | |
1537 | info->params.stop_bits + 1; | |
1538 | ||
1539 | /* if port data rate is set to 460800 or less then | |
1540 | * allow tty settings to override, otherwise keep the | |
1541 | * current data rate. | |
1542 | */ | |
1543 | if (info->params.data_rate <= 460800) { | |
1544 | info->params.data_rate = tty_get_baud_rate(info->tty); | |
1545 | } | |
1546 | ||
1547 | if ( info->params.data_rate ) { | |
1548 | info->timeout = (32*HZ*bits_per_char) / | |
1549 | info->params.data_rate; | |
1550 | } | |
1551 | info->timeout += HZ/50; /* Add .02 seconds of slop */ | |
1552 | ||
1553 | if (cflag & CRTSCTS) | |
1554 | info->flags |= ASYNC_CTS_FLOW; | |
1555 | else | |
1556 | info->flags &= ~ASYNC_CTS_FLOW; | |
1557 | ||
1558 | if (cflag & CLOCAL) | |
1559 | info->flags &= ~ASYNC_CHECK_CD; | |
1560 | else | |
1561 | info->flags |= ASYNC_CHECK_CD; | |
1562 | ||
1563 | /* process tty input control flags */ | |
1564 | ||
1565 | info->read_status_mask = 0; | |
1566 | if (I_INPCK(info->tty)) | |
1567 | info->read_status_mask |= BIT7 | BIT6; | |
1568 | if (I_IGNPAR(info->tty)) | |
1569 | info->ignore_status_mask |= BIT7 | BIT6; | |
1570 | ||
1571 | mgslpc_program_hw(info); | |
1572 | } | |
1573 | ||
1574 | /* Add a character to the transmit buffer | |
1575 | */ | |
1576 | static void mgslpc_put_char(struct tty_struct *tty, unsigned char ch) | |
1577 | { | |
1578 | MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; | |
1579 | unsigned long flags; | |
1580 | ||
1581 | if (debug_level >= DEBUG_LEVEL_INFO) { | |
1582 | printk( "%s(%d):mgslpc_put_char(%d) on %s\n", | |
1583 | __FILE__,__LINE__,ch,info->device_name); | |
1584 | } | |
1585 | ||
1586 | if (mgslpc_paranoia_check(info, tty->name, "mgslpc_put_char")) | |
1587 | return; | |
1588 | ||
326f28e9 | 1589 | if (!info->tx_buf) |
1da177e4 LT |
1590 | return; |
1591 | ||
1592 | spin_lock_irqsave(&info->lock,flags); | |
1593 | ||
1594 | if (info->params.mode == MGSL_MODE_ASYNC || !info->tx_active) { | |
1595 | if (info->tx_count < TXBUFSIZE - 1) { | |
1596 | info->tx_buf[info->tx_put++] = ch; | |
1597 | info->tx_put &= TXBUFSIZE-1; | |
1598 | info->tx_count++; | |
1599 | } | |
1600 | } | |
1601 | ||
1602 | spin_unlock_irqrestore(&info->lock,flags); | |
1603 | } | |
1604 | ||
1605 | /* Enable transmitter so remaining characters in the | |
1606 | * transmit buffer are sent. | |
1607 | */ | |
1608 | static void mgslpc_flush_chars(struct tty_struct *tty) | |
1609 | { | |
1610 | MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; | |
1611 | unsigned long flags; | |
1612 | ||
1613 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1614 | printk( "%s(%d):mgslpc_flush_chars() entry on %s tx_count=%d\n", | |
1615 | __FILE__,__LINE__,info->device_name,info->tx_count); | |
1616 | ||
1617 | if (mgslpc_paranoia_check(info, tty->name, "mgslpc_flush_chars")) | |
1618 | return; | |
1619 | ||
1620 | if (info->tx_count <= 0 || tty->stopped || | |
1621 | tty->hw_stopped || !info->tx_buf) | |
1622 | return; | |
1623 | ||
1624 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1625 | printk( "%s(%d):mgslpc_flush_chars() entry on %s starting transmitter\n", | |
1626 | __FILE__,__LINE__,info->device_name); | |
1627 | ||
1628 | spin_lock_irqsave(&info->lock,flags); | |
1629 | if (!info->tx_active) | |
1630 | tx_start(info); | |
1631 | spin_unlock_irqrestore(&info->lock,flags); | |
1632 | } | |
1633 | ||
1634 | /* Send a block of data | |
1635 | * | |
1636 | * Arguments: | |
1637 | * | |
1638 | * tty pointer to tty information structure | |
1639 | * buf pointer to buffer containing send data | |
1640 | * count size of send data in bytes | |
1641 | * | |
1642 | * Returns: number of characters written | |
1643 | */ | |
1644 | static int mgslpc_write(struct tty_struct * tty, | |
1645 | const unsigned char *buf, int count) | |
1646 | { | |
1647 | int c, ret = 0; | |
1648 | MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; | |
1649 | unsigned long flags; | |
1650 | ||
1651 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1652 | printk( "%s(%d):mgslpc_write(%s) count=%d\n", | |
1653 | __FILE__,__LINE__,info->device_name,count); | |
1654 | ||
1655 | if (mgslpc_paranoia_check(info, tty->name, "mgslpc_write") || | |
326f28e9 | 1656 | !info->tx_buf) |
1da177e4 LT |
1657 | goto cleanup; |
1658 | ||
1659 | if (info->params.mode == MGSL_MODE_HDLC) { | |
1660 | if (count > TXBUFSIZE) { | |
1661 | ret = -EIO; | |
1662 | goto cleanup; | |
1663 | } | |
1664 | if (info->tx_active) | |
1665 | goto cleanup; | |
1666 | else if (info->tx_count) | |
1667 | goto start; | |
1668 | } | |
1669 | ||
1670 | for (;;) { | |
1671 | c = min(count, | |
1672 | min(TXBUFSIZE - info->tx_count - 1, | |
1673 | TXBUFSIZE - info->tx_put)); | |
1674 | if (c <= 0) | |
1675 | break; | |
1676 | ||
1677 | memcpy(info->tx_buf + info->tx_put, buf, c); | |
1678 | ||
1679 | spin_lock_irqsave(&info->lock,flags); | |
1680 | info->tx_put = (info->tx_put + c) & (TXBUFSIZE-1); | |
1681 | info->tx_count += c; | |
1682 | spin_unlock_irqrestore(&info->lock,flags); | |
1683 | ||
1684 | buf += c; | |
1685 | count -= c; | |
1686 | ret += c; | |
1687 | } | |
1688 | start: | |
1689 | if (info->tx_count && !tty->stopped && !tty->hw_stopped) { | |
1690 | spin_lock_irqsave(&info->lock,flags); | |
1691 | if (!info->tx_active) | |
1692 | tx_start(info); | |
1693 | spin_unlock_irqrestore(&info->lock,flags); | |
1694 | } | |
1695 | cleanup: | |
1696 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1697 | printk( "%s(%d):mgslpc_write(%s) returning=%d\n", | |
1698 | __FILE__,__LINE__,info->device_name,ret); | |
1699 | return ret; | |
1700 | } | |
1701 | ||
1702 | /* Return the count of free bytes in transmit buffer | |
1703 | */ | |
1704 | static int mgslpc_write_room(struct tty_struct *tty) | |
1705 | { | |
1706 | MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; | |
1707 | int ret; | |
1708 | ||
1709 | if (mgslpc_paranoia_check(info, tty->name, "mgslpc_write_room")) | |
1710 | return 0; | |
1711 | ||
1712 | if (info->params.mode == MGSL_MODE_HDLC) { | |
1713 | /* HDLC (frame oriented) mode */ | |
1714 | if (info->tx_active) | |
1715 | return 0; | |
1716 | else | |
1717 | return HDLC_MAX_FRAME_SIZE; | |
1718 | } else { | |
1719 | ret = TXBUFSIZE - info->tx_count - 1; | |
1720 | if (ret < 0) | |
1721 | ret = 0; | |
1722 | } | |
1723 | ||
1724 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1725 | printk("%s(%d):mgslpc_write_room(%s)=%d\n", | |
1726 | __FILE__,__LINE__, info->device_name, ret); | |
1727 | return ret; | |
1728 | } | |
1729 | ||
1730 | /* Return the count of bytes in transmit buffer | |
1731 | */ | |
1732 | static int mgslpc_chars_in_buffer(struct tty_struct *tty) | |
1733 | { | |
1734 | MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; | |
1735 | int rc; | |
1736 | ||
1737 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1738 | printk("%s(%d):mgslpc_chars_in_buffer(%s)\n", | |
1739 | __FILE__,__LINE__, info->device_name ); | |
1740 | ||
1741 | if (mgslpc_paranoia_check(info, tty->name, "mgslpc_chars_in_buffer")) | |
1742 | return 0; | |
1743 | ||
1744 | if (info->params.mode == MGSL_MODE_HDLC) | |
1745 | rc = info->tx_active ? info->max_frame_size : 0; | |
1746 | else | |
1747 | rc = info->tx_count; | |
1748 | ||
1749 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1750 | printk("%s(%d):mgslpc_chars_in_buffer(%s)=%d\n", | |
1751 | __FILE__,__LINE__, info->device_name, rc); | |
1752 | ||
1753 | return rc; | |
1754 | } | |
1755 | ||
1756 | /* Discard all data in the send buffer | |
1757 | */ | |
1758 | static void mgslpc_flush_buffer(struct tty_struct *tty) | |
1759 | { | |
1760 | MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; | |
1761 | unsigned long flags; | |
1762 | ||
1763 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1764 | printk("%s(%d):mgslpc_flush_buffer(%s) entry\n", | |
1765 | __FILE__,__LINE__, info->device_name ); | |
1766 | ||
1767 | if (mgslpc_paranoia_check(info, tty->name, "mgslpc_flush_buffer")) | |
1768 | return; | |
1769 | ||
1770 | spin_lock_irqsave(&info->lock,flags); | |
1771 | info->tx_count = info->tx_put = info->tx_get = 0; | |
1772 | del_timer(&info->tx_timer); | |
1773 | spin_unlock_irqrestore(&info->lock,flags); | |
1774 | ||
1775 | wake_up_interruptible(&tty->write_wait); | |
1776 | tty_wakeup(tty); | |
1777 | } | |
1778 | ||
1779 | /* Send a high-priority XON/XOFF character | |
1780 | */ | |
1781 | static void mgslpc_send_xchar(struct tty_struct *tty, char ch) | |
1782 | { | |
1783 | MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; | |
1784 | unsigned long flags; | |
1785 | ||
1786 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1787 | printk("%s(%d):mgslpc_send_xchar(%s,%d)\n", | |
1788 | __FILE__,__LINE__, info->device_name, ch ); | |
1789 | ||
1790 | if (mgslpc_paranoia_check(info, tty->name, "mgslpc_send_xchar")) | |
1791 | return; | |
1792 | ||
1793 | info->x_char = ch; | |
1794 | if (ch) { | |
1795 | spin_lock_irqsave(&info->lock,flags); | |
1796 | if (!info->tx_enabled) | |
1797 | tx_start(info); | |
1798 | spin_unlock_irqrestore(&info->lock,flags); | |
1799 | } | |
1800 | } | |
1801 | ||
1802 | /* Signal remote device to throttle send data (our receive data) | |
1803 | */ | |
1804 | static void mgslpc_throttle(struct tty_struct * tty) | |
1805 | { | |
1806 | MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; | |
1807 | unsigned long flags; | |
1808 | ||
1809 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1810 | printk("%s(%d):mgslpc_throttle(%s) entry\n", | |
1811 | __FILE__,__LINE__, info->device_name ); | |
1812 | ||
1813 | if (mgslpc_paranoia_check(info, tty->name, "mgslpc_throttle")) | |
1814 | return; | |
1815 | ||
1816 | if (I_IXOFF(tty)) | |
1817 | mgslpc_send_xchar(tty, STOP_CHAR(tty)); | |
1818 | ||
1819 | if (tty->termios->c_cflag & CRTSCTS) { | |
1820 | spin_lock_irqsave(&info->lock,flags); | |
1821 | info->serial_signals &= ~SerialSignal_RTS; | |
1822 | set_signals(info); | |
1823 | spin_unlock_irqrestore(&info->lock,flags); | |
1824 | } | |
1825 | } | |
1826 | ||
1827 | /* Signal remote device to stop throttling send data (our receive data) | |
1828 | */ | |
1829 | static void mgslpc_unthrottle(struct tty_struct * tty) | |
1830 | { | |
1831 | MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; | |
1832 | unsigned long flags; | |
1833 | ||
1834 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1835 | printk("%s(%d):mgslpc_unthrottle(%s) entry\n", | |
1836 | __FILE__,__LINE__, info->device_name ); | |
1837 | ||
1838 | if (mgslpc_paranoia_check(info, tty->name, "mgslpc_unthrottle")) | |
1839 | return; | |
1840 | ||
1841 | if (I_IXOFF(tty)) { | |
1842 | if (info->x_char) | |
1843 | info->x_char = 0; | |
1844 | else | |
1845 | mgslpc_send_xchar(tty, START_CHAR(tty)); | |
1846 | } | |
1847 | ||
1848 | if (tty->termios->c_cflag & CRTSCTS) { | |
1849 | spin_lock_irqsave(&info->lock,flags); | |
1850 | info->serial_signals |= SerialSignal_RTS; | |
1851 | set_signals(info); | |
1852 | spin_unlock_irqrestore(&info->lock,flags); | |
1853 | } | |
1854 | } | |
1855 | ||
1856 | /* get the current serial statistics | |
1857 | */ | |
1858 | static int get_stats(MGSLPC_INFO * info, struct mgsl_icount __user *user_icount) | |
1859 | { | |
1860 | int err; | |
1861 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1862 | printk("get_params(%s)\n", info->device_name); | |
a7482a2e PF |
1863 | if (!user_icount) { |
1864 | memset(&info->icount, 0, sizeof(info->icount)); | |
1865 | } else { | |
1866 | COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount)); | |
1867 | if (err) | |
1868 | return -EFAULT; | |
1869 | } | |
1da177e4 LT |
1870 | return 0; |
1871 | } | |
1872 | ||
1873 | /* get the current serial parameters | |
1874 | */ | |
1875 | static int get_params(MGSLPC_INFO * info, MGSL_PARAMS __user *user_params) | |
1876 | { | |
1877 | int err; | |
1878 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1879 | printk("get_params(%s)\n", info->device_name); | |
1880 | COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS)); | |
1881 | if (err) | |
1882 | return -EFAULT; | |
1883 | return 0; | |
1884 | } | |
1885 | ||
1886 | /* set the serial parameters | |
1887 | * | |
1888 | * Arguments: | |
1889 | * | |
1890 | * info pointer to device instance data | |
1891 | * new_params user buffer containing new serial params | |
1892 | * | |
1893 | * Returns: 0 if success, otherwise error code | |
1894 | */ | |
1895 | static int set_params(MGSLPC_INFO * info, MGSL_PARAMS __user *new_params) | |
1896 | { | |
1897 | unsigned long flags; | |
1898 | MGSL_PARAMS tmp_params; | |
1899 | int err; | |
1900 | ||
1901 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1902 | printk("%s(%d):set_params %s\n", __FILE__,__LINE__, | |
1903 | info->device_name ); | |
1904 | COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS)); | |
1905 | if (err) { | |
1906 | if ( debug_level >= DEBUG_LEVEL_INFO ) | |
1907 | printk( "%s(%d):set_params(%s) user buffer copy failed\n", | |
1908 | __FILE__,__LINE__,info->device_name); | |
1909 | return -EFAULT; | |
1910 | } | |
1911 | ||
1912 | spin_lock_irqsave(&info->lock,flags); | |
1913 | memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS)); | |
1914 | spin_unlock_irqrestore(&info->lock,flags); | |
1915 | ||
1916 | mgslpc_change_params(info); | |
1917 | ||
1918 | return 0; | |
1919 | } | |
1920 | ||
1921 | static int get_txidle(MGSLPC_INFO * info, int __user *idle_mode) | |
1922 | { | |
1923 | int err; | |
1924 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1925 | printk("get_txidle(%s)=%d\n", info->device_name, info->idle_mode); | |
1926 | COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int)); | |
1927 | if (err) | |
1928 | return -EFAULT; | |
1929 | return 0; | |
1930 | } | |
1931 | ||
1932 | static int set_txidle(MGSLPC_INFO * info, int idle_mode) | |
1933 | { | |
1934 | unsigned long flags; | |
1935 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1936 | printk("set_txidle(%s,%d)\n", info->device_name, idle_mode); | |
1937 | spin_lock_irqsave(&info->lock,flags); | |
1938 | info->idle_mode = idle_mode; | |
1939 | tx_set_idle(info); | |
1940 | spin_unlock_irqrestore(&info->lock,flags); | |
1941 | return 0; | |
1942 | } | |
1943 | ||
1944 | static int get_interface(MGSLPC_INFO * info, int __user *if_mode) | |
1945 | { | |
1946 | int err; | |
1947 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1948 | printk("get_interface(%s)=%d\n", info->device_name, info->if_mode); | |
1949 | COPY_TO_USER(err,if_mode, &info->if_mode, sizeof(int)); | |
1950 | if (err) | |
1951 | return -EFAULT; | |
1952 | return 0; | |
1953 | } | |
1954 | ||
1955 | static int set_interface(MGSLPC_INFO * info, int if_mode) | |
1956 | { | |
1957 | unsigned long flags; | |
1958 | unsigned char val; | |
1959 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1960 | printk("set_interface(%s,%d)\n", info->device_name, if_mode); | |
1961 | spin_lock_irqsave(&info->lock,flags); | |
1962 | info->if_mode = if_mode; | |
1963 | ||
1964 | val = read_reg(info, PVR) & 0x0f; | |
1965 | switch (info->if_mode) | |
1966 | { | |
1967 | case MGSL_INTERFACE_RS232: val |= PVR_RS232; break; | |
1968 | case MGSL_INTERFACE_V35: val |= PVR_V35; break; | |
1969 | case MGSL_INTERFACE_RS422: val |= PVR_RS422; break; | |
1970 | } | |
1971 | write_reg(info, PVR, val); | |
1972 | ||
1973 | spin_unlock_irqrestore(&info->lock,flags); | |
1974 | return 0; | |
1975 | } | |
1976 | ||
1977 | static int set_txenable(MGSLPC_INFO * info, int enable) | |
1978 | { | |
1979 | unsigned long flags; | |
1980 | ||
1981 | if (debug_level >= DEBUG_LEVEL_INFO) | |
1982 | printk("set_txenable(%s,%d)\n", info->device_name, enable); | |
1983 | ||
1984 | spin_lock_irqsave(&info->lock,flags); | |
1985 | if (enable) { | |
1986 | if (!info->tx_enabled) | |
1987 | tx_start(info); | |
1988 | } else { | |
1989 | if (info->tx_enabled) | |
1990 | tx_stop(info); | |
1991 | } | |
1992 | spin_unlock_irqrestore(&info->lock,flags); | |
1993 | return 0; | |
1994 | } | |
1995 | ||
1996 | static int tx_abort(MGSLPC_INFO * info) | |
1997 | { | |
1998 | unsigned long flags; | |
1999 | ||
2000 | if (debug_level >= DEBUG_LEVEL_INFO) | |
2001 | printk("tx_abort(%s)\n", info->device_name); | |
2002 | ||
2003 | spin_lock_irqsave(&info->lock,flags); | |
2004 | if (info->tx_active && info->tx_count && | |
2005 | info->params.mode == MGSL_MODE_HDLC) { | |
2006 | /* clear data count so FIFO is not filled on next IRQ. | |
2007 | * This results in underrun and abort transmission. | |
2008 | */ | |
2009 | info->tx_count = info->tx_put = info->tx_get = 0; | |
2010 | info->tx_aborting = TRUE; | |
2011 | } | |
2012 | spin_unlock_irqrestore(&info->lock,flags); | |
2013 | return 0; | |
2014 | } | |
2015 | ||
2016 | static int set_rxenable(MGSLPC_INFO * info, int enable) | |
2017 | { | |
2018 | unsigned long flags; | |
2019 | ||
2020 | if (debug_level >= DEBUG_LEVEL_INFO) | |
2021 | printk("set_rxenable(%s,%d)\n", info->device_name, enable); | |
2022 | ||
2023 | spin_lock_irqsave(&info->lock,flags); | |
2024 | if (enable) { | |
2025 | if (!info->rx_enabled) | |
2026 | rx_start(info); | |
2027 | } else { | |
2028 | if (info->rx_enabled) | |
2029 | rx_stop(info); | |
2030 | } | |
2031 | spin_unlock_irqrestore(&info->lock,flags); | |
2032 | return 0; | |
2033 | } | |
2034 | ||
2035 | /* wait for specified event to occur | |
2036 | * | |
2037 | * Arguments: info pointer to device instance data | |
2038 | * mask pointer to bitmask of events to wait for | |
2039 | * Return Value: 0 if successful and bit mask updated with | |
2040 | * of events triggerred, | |
2041 | * otherwise error code | |
2042 | */ | |
2043 | static int wait_events(MGSLPC_INFO * info, int __user *mask_ptr) | |
2044 | { | |
2045 | unsigned long flags; | |
2046 | int s; | |
2047 | int rc=0; | |
2048 | struct mgsl_icount cprev, cnow; | |
2049 | int events; | |
2050 | int mask; | |
2051 | struct _input_signal_events oldsigs, newsigs; | |
2052 | DECLARE_WAITQUEUE(wait, current); | |
2053 | ||
2054 | COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int)); | |
2055 | if (rc) | |
2056 | return -EFAULT; | |
2057 | ||
2058 | if (debug_level >= DEBUG_LEVEL_INFO) | |
2059 | printk("wait_events(%s,%d)\n", info->device_name, mask); | |
2060 | ||
2061 | spin_lock_irqsave(&info->lock,flags); | |
2062 | ||
2063 | /* return immediately if state matches requested events */ | |
2064 | get_signals(info); | |
2065 | s = info->serial_signals; | |
2066 | events = mask & | |
2067 | ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) + | |
2068 | ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) + | |
2069 | ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) + | |
2070 | ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) ); | |
2071 | if (events) { | |
2072 | spin_unlock_irqrestore(&info->lock,flags); | |
2073 | goto exit; | |
2074 | } | |
2075 | ||
2076 | /* save current irq counts */ | |
2077 | cprev = info->icount; | |
2078 | oldsigs = info->input_signal_events; | |
2079 | ||
2080 | if ((info->params.mode == MGSL_MODE_HDLC) && | |
2081 | (mask & MgslEvent_ExitHuntMode)) | |
2082 | irq_enable(info, CHA, IRQ_EXITHUNT); | |
2083 | ||
2084 | set_current_state(TASK_INTERRUPTIBLE); | |
2085 | add_wait_queue(&info->event_wait_q, &wait); | |
2086 | ||
2087 | spin_unlock_irqrestore(&info->lock,flags); | |
2088 | ||
2089 | ||
2090 | for(;;) { | |
2091 | schedule(); | |
2092 | if (signal_pending(current)) { | |
2093 | rc = -ERESTARTSYS; | |
2094 | break; | |
2095 | } | |
2096 | ||
2097 | /* get current irq counts */ | |
2098 | spin_lock_irqsave(&info->lock,flags); | |
2099 | cnow = info->icount; | |
2100 | newsigs = info->input_signal_events; | |
2101 | set_current_state(TASK_INTERRUPTIBLE); | |
2102 | spin_unlock_irqrestore(&info->lock,flags); | |
2103 | ||
2104 | /* if no change, wait aborted for some reason */ | |
2105 | if (newsigs.dsr_up == oldsigs.dsr_up && | |
2106 | newsigs.dsr_down == oldsigs.dsr_down && | |
2107 | newsigs.dcd_up == oldsigs.dcd_up && | |
2108 | newsigs.dcd_down == oldsigs.dcd_down && | |
2109 | newsigs.cts_up == oldsigs.cts_up && | |
2110 | newsigs.cts_down == oldsigs.cts_down && | |
2111 | newsigs.ri_up == oldsigs.ri_up && | |
2112 | newsigs.ri_down == oldsigs.ri_down && | |
2113 | cnow.exithunt == cprev.exithunt && | |
2114 | cnow.rxidle == cprev.rxidle) { | |
2115 | rc = -EIO; | |
2116 | break; | |
2117 | } | |
2118 | ||
2119 | events = mask & | |
2120 | ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) + | |
2121 | (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) + | |
2122 | (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) + | |
2123 | (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) + | |
2124 | (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) + | |
2125 | (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) + | |
2126 | (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) + | |
2127 | (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) + | |
2128 | (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) + | |
2129 | (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) ); | |
2130 | if (events) | |
2131 | break; | |
2132 | ||
2133 | cprev = cnow; | |
2134 | oldsigs = newsigs; | |
2135 | } | |
2136 | ||
2137 | remove_wait_queue(&info->event_wait_q, &wait); | |
2138 | set_current_state(TASK_RUNNING); | |
2139 | ||
2140 | if (mask & MgslEvent_ExitHuntMode) { | |
2141 | spin_lock_irqsave(&info->lock,flags); | |
2142 | if (!waitqueue_active(&info->event_wait_q)) | |
2143 | irq_disable(info, CHA, IRQ_EXITHUNT); | |
2144 | spin_unlock_irqrestore(&info->lock,flags); | |
2145 | } | |
2146 | exit: | |
2147 | if (rc == 0) | |
2148 | PUT_USER(rc, events, mask_ptr); | |
2149 | return rc; | |
2150 | } | |
2151 | ||
2152 | static int modem_input_wait(MGSLPC_INFO *info,int arg) | |
2153 | { | |
2154 | unsigned long flags; | |
2155 | int rc; | |
2156 | struct mgsl_icount cprev, cnow; | |
2157 | DECLARE_WAITQUEUE(wait, current); | |
2158 | ||
2159 | /* save current irq counts */ | |
2160 | spin_lock_irqsave(&info->lock,flags); | |
2161 | cprev = info->icount; | |
2162 | add_wait_queue(&info->status_event_wait_q, &wait); | |
2163 | set_current_state(TASK_INTERRUPTIBLE); | |
2164 | spin_unlock_irqrestore(&info->lock,flags); | |
2165 | ||
2166 | for(;;) { | |
2167 | schedule(); | |
2168 | if (signal_pending(current)) { | |
2169 | rc = -ERESTARTSYS; | |
2170 | break; | |
2171 | } | |
2172 | ||
2173 | /* get new irq counts */ | |
2174 | spin_lock_irqsave(&info->lock,flags); | |
2175 | cnow = info->icount; | |
2176 | set_current_state(TASK_INTERRUPTIBLE); | |
2177 | spin_unlock_irqrestore(&info->lock,flags); | |
2178 | ||
2179 | /* if no change, wait aborted for some reason */ | |
2180 | if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && | |
2181 | cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { | |
2182 | rc = -EIO; | |
2183 | break; | |
2184 | } | |
2185 | ||
2186 | /* check for change in caller specified modem input */ | |
2187 | if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) || | |
2188 | (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) || | |
2189 | (arg & TIOCM_CD && cnow.dcd != cprev.dcd) || | |
2190 | (arg & TIOCM_CTS && cnow.cts != cprev.cts)) { | |
2191 | rc = 0; | |
2192 | break; | |
2193 | } | |
2194 | ||
2195 | cprev = cnow; | |
2196 | } | |
2197 | remove_wait_queue(&info->status_event_wait_q, &wait); | |
2198 | set_current_state(TASK_RUNNING); | |
2199 | return rc; | |
2200 | } | |
2201 | ||
2202 | /* return the state of the serial control and status signals | |
2203 | */ | |
2204 | static int tiocmget(struct tty_struct *tty, struct file *file) | |
2205 | { | |
2206 | MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; | |
2207 | unsigned int result; | |
2208 | unsigned long flags; | |
2209 | ||
2210 | spin_lock_irqsave(&info->lock,flags); | |
2211 | get_signals(info); | |
2212 | spin_unlock_irqrestore(&info->lock,flags); | |
2213 | ||
2214 | result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) + | |
2215 | ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) + | |
2216 | ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) + | |
2217 | ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) + | |
2218 | ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) + | |
2219 | ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0); | |
2220 | ||
2221 | if (debug_level >= DEBUG_LEVEL_INFO) | |
2222 | printk("%s(%d):%s tiocmget() value=%08X\n", | |
2223 | __FILE__,__LINE__, info->device_name, result ); | |
2224 | return result; | |
2225 | } | |
2226 | ||
2227 | /* set modem control signals (DTR/RTS) | |
2228 | */ | |
2229 | static int tiocmset(struct tty_struct *tty, struct file *file, | |
2230 | unsigned int set, unsigned int clear) | |
2231 | { | |
2232 | MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; | |
2233 | unsigned long flags; | |
2234 | ||
2235 | if (debug_level >= DEBUG_LEVEL_INFO) | |
2236 | printk("%s(%d):%s tiocmset(%x,%x)\n", | |
2237 | __FILE__,__LINE__,info->device_name, set, clear); | |
2238 | ||
2239 | if (set & TIOCM_RTS) | |
2240 | info->serial_signals |= SerialSignal_RTS; | |
2241 | if (set & TIOCM_DTR) | |
2242 | info->serial_signals |= SerialSignal_DTR; | |
2243 | if (clear & TIOCM_RTS) | |
2244 | info->serial_signals &= ~SerialSignal_RTS; | |
2245 | if (clear & TIOCM_DTR) | |
2246 | info->serial_signals &= ~SerialSignal_DTR; | |
2247 | ||
2248 | spin_lock_irqsave(&info->lock,flags); | |
2249 | set_signals(info); | |
2250 | spin_unlock_irqrestore(&info->lock,flags); | |
2251 | ||
2252 | return 0; | |
2253 | } | |
2254 | ||
2255 | /* Set or clear transmit break condition | |
2256 | * | |
2257 | * Arguments: tty pointer to tty instance data | |
2258 | * break_state -1=set break condition, 0=clear | |
2259 | */ | |
2260 | static void mgslpc_break(struct tty_struct *tty, int break_state) | |
2261 | { | |
2262 | MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data; | |
2263 | unsigned long flags; | |
2264 | ||
2265 | if (debug_level >= DEBUG_LEVEL_INFO) | |
2266 | printk("%s(%d):mgslpc_break(%s,%d)\n", | |
2267 | __FILE__,__LINE__, info->device_name, break_state); | |
2268 | ||
2269 | if (mgslpc_paranoia_check(info, tty->name, "mgslpc_break")) | |
2270 | return; | |
2271 | ||
2272 | spin_lock_irqsave(&info->lock,flags); | |
2273 | if (break_state == -1) | |
2274 | set_reg_bits(info, CHA+DAFO, BIT6); | |
2275 | else | |
2276 | clear_reg_bits(info, CHA+DAFO, BIT6); | |
2277 | spin_unlock_irqrestore(&info->lock,flags); | |
2278 | } | |
2279 | ||
2280 | /* Service an IOCTL request | |
2281 | * | |
2282 | * Arguments: | |
2283 | * | |
2284 | * tty pointer to tty instance data | |
2285 | * file pointer to associated file object for device | |
2286 | * cmd IOCTL command code | |
2287 | * arg command argument/context | |
2288 | * | |
2289 | * Return Value: 0 if success, otherwise error code | |
2290 | */ | |
2291 | static int mgslpc_ioctl(struct tty_struct *tty, struct file * file, | |
2292 | unsigned int cmd, unsigned long arg) | |
2293 | { | |
2294 | MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data; | |
2295 | ||
2296 | if (debug_level >= DEBUG_LEVEL_INFO) | |
2297 | printk("%s(%d):mgslpc_ioctl %s cmd=%08X\n", __FILE__,__LINE__, | |
2298 | info->device_name, cmd ); | |
2299 | ||
2300 | if (mgslpc_paranoia_check(info, tty->name, "mgslpc_ioctl")) | |
2301 | return -ENODEV; | |
2302 | ||
2303 | if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && | |
2304 | (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { | |
2305 | if (tty->flags & (1 << TTY_IO_ERROR)) | |
2306 | return -EIO; | |
2307 | } | |
2308 | ||
2309 | return ioctl_common(info, cmd, arg); | |
2310 | } | |
2311 | ||
cdaad343 | 2312 | static int ioctl_common(MGSLPC_INFO *info, unsigned int cmd, unsigned long arg) |
1da177e4 LT |
2313 | { |
2314 | int error; | |
2315 | struct mgsl_icount cnow; /* kernel counter temps */ | |
2316 | struct serial_icounter_struct __user *p_cuser; /* user space */ | |
2317 | void __user *argp = (void __user *)arg; | |
2318 | unsigned long flags; | |
2319 | ||
2320 | switch (cmd) { | |
2321 | case MGSL_IOCGPARAMS: | |
2322 | return get_params(info, argp); | |
2323 | case MGSL_IOCSPARAMS: | |
2324 | return set_params(info, argp); | |
2325 | case MGSL_IOCGTXIDLE: | |
2326 | return get_txidle(info, argp); | |
2327 | case MGSL_IOCSTXIDLE: | |
2328 | return set_txidle(info, (int)arg); | |
2329 | case MGSL_IOCGIF: | |
2330 | return get_interface(info, argp); | |
2331 | case MGSL_IOCSIF: | |
2332 | return set_interface(info,(int)arg); | |
2333 | case MGSL_IOCTXENABLE: | |
2334 | return set_txenable(info,(int)arg); | |
2335 | case MGSL_IOCRXENABLE: | |
2336 | return set_rxenable(info,(int)arg); | |
2337 | case MGSL_IOCTXABORT: | |
2338 | return tx_abort(info); | |
2339 | case MGSL_IOCGSTATS: | |
2340 | return get_stats(info, argp); | |
2341 | case MGSL_IOCWAITEVENT: | |
2342 | return wait_events(info, argp); | |
2343 | case TIOCMIWAIT: | |
2344 | return modem_input_wait(info,(int)arg); | |
2345 | case TIOCGICOUNT: | |
2346 | spin_lock_irqsave(&info->lock,flags); | |
2347 | cnow = info->icount; | |
2348 | spin_unlock_irqrestore(&info->lock,flags); | |
2349 | p_cuser = argp; | |
2350 | PUT_USER(error,cnow.cts, &p_cuser->cts); | |
2351 | if (error) return error; | |
2352 | PUT_USER(error,cnow.dsr, &p_cuser->dsr); | |
2353 | if (error) return error; | |
2354 | PUT_USER(error,cnow.rng, &p_cuser->rng); | |
2355 | if (error) return error; | |
2356 | PUT_USER(error,cnow.dcd, &p_cuser->dcd); | |
2357 | if (error) return error; | |
2358 | PUT_USER(error,cnow.rx, &p_cuser->rx); | |
2359 | if (error) return error; | |
2360 | PUT_USER(error,cnow.tx, &p_cuser->tx); | |
2361 | if (error) return error; | |
2362 | PUT_USER(error,cnow.frame, &p_cuser->frame); | |
2363 | if (error) return error; | |
2364 | PUT_USER(error,cnow.overrun, &p_cuser->overrun); | |
2365 | if (error) return error; | |
2366 | PUT_USER(error,cnow.parity, &p_cuser->parity); | |
2367 | if (error) return error; | |
2368 | PUT_USER(error,cnow.brk, &p_cuser->brk); | |
2369 | if (error) return error; | |
2370 | PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun); | |
2371 | if (error) return error; | |
2372 | return 0; | |
2373 | default: | |
2374 | return -ENOIOCTLCMD; | |
2375 | } | |
2376 | return 0; | |
2377 | } | |
2378 | ||
2379 | /* Set new termios settings | |
2380 | * | |
2381 | * Arguments: | |
2382 | * | |
2383 | * tty pointer to tty structure | |
2384 | * termios pointer to buffer to hold returned old termios | |
2385 | */ | |
2386 | static void mgslpc_set_termios(struct tty_struct *tty, struct termios *old_termios) | |
2387 | { | |
2388 | MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; | |
2389 | unsigned long flags; | |
2390 | ||
2391 | if (debug_level >= DEBUG_LEVEL_INFO) | |
2392 | printk("%s(%d):mgslpc_set_termios %s\n", __FILE__,__LINE__, | |
2393 | tty->driver->name ); | |
2394 | ||
2395 | /* just return if nothing has changed */ | |
2396 | if ((tty->termios->c_cflag == old_termios->c_cflag) | |
2397 | && (RELEVANT_IFLAG(tty->termios->c_iflag) | |
2398 | == RELEVANT_IFLAG(old_termios->c_iflag))) | |
2399 | return; | |
2400 | ||
2401 | mgslpc_change_params(info); | |
2402 | ||
2403 | /* Handle transition to B0 status */ | |
2404 | if (old_termios->c_cflag & CBAUD && | |
2405 | !(tty->termios->c_cflag & CBAUD)) { | |
2406 | info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); | |
2407 | spin_lock_irqsave(&info->lock,flags); | |
2408 | set_signals(info); | |
2409 | spin_unlock_irqrestore(&info->lock,flags); | |
2410 | } | |
2411 | ||
2412 | /* Handle transition away from B0 status */ | |
2413 | if (!(old_termios->c_cflag & CBAUD) && | |
2414 | tty->termios->c_cflag & CBAUD) { | |
2415 | info->serial_signals |= SerialSignal_DTR; | |
2416 | if (!(tty->termios->c_cflag & CRTSCTS) || | |
2417 | !test_bit(TTY_THROTTLED, &tty->flags)) { | |
2418 | info->serial_signals |= SerialSignal_RTS; | |
2419 | } | |
2420 | spin_lock_irqsave(&info->lock,flags); | |
2421 | set_signals(info); | |
2422 | spin_unlock_irqrestore(&info->lock,flags); | |
2423 | } | |
2424 | ||
2425 | /* Handle turning off CRTSCTS */ | |
2426 | if (old_termios->c_cflag & CRTSCTS && | |
2427 | !(tty->termios->c_cflag & CRTSCTS)) { | |
2428 | tty->hw_stopped = 0; | |
2429 | tx_release(tty); | |
2430 | } | |
2431 | } | |
2432 | ||
2433 | static void mgslpc_close(struct tty_struct *tty, struct file * filp) | |
2434 | { | |
2435 | MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data; | |
2436 | ||
2437 | if (mgslpc_paranoia_check(info, tty->name, "mgslpc_close")) | |
2438 | return; | |
2439 | ||
2440 | if (debug_level >= DEBUG_LEVEL_INFO) | |
2441 | printk("%s(%d):mgslpc_close(%s) entry, count=%d\n", | |
2442 | __FILE__,__LINE__, info->device_name, info->count); | |
2443 | ||
2444 | if (!info->count) | |
2445 | return; | |
2446 | ||
2447 | if (tty_hung_up_p(filp)) | |
2448 | goto cleanup; | |
2449 | ||
2450 | if ((tty->count == 1) && (info->count != 1)) { | |
2451 | /* | |
2452 | * tty->count is 1 and the tty structure will be freed. | |
2453 | * info->count should be one in this case. | |
2454 | * if it's not, correct it so that the port is shutdown. | |
2455 | */ | |
2456 | printk("mgslpc_close: bad refcount; tty->count is 1, " | |
2457 | "info->count is %d\n", info->count); | |
2458 | info->count = 1; | |
2459 | } | |
2460 | ||
2461 | info->count--; | |
2462 | ||
2463 | /* if at least one open remaining, leave hardware active */ | |
2464 | if (info->count) | |
2465 | goto cleanup; | |
2466 | ||
2467 | info->flags |= ASYNC_CLOSING; | |
2468 | ||
2469 | /* set tty->closing to notify line discipline to | |
2470 | * only process XON/XOFF characters. Only the N_TTY | |
2471 | * discipline appears to use this (ppp does not). | |
2472 | */ | |
2473 | tty->closing = 1; | |
2474 | ||
2475 | /* wait for transmit data to clear all layers */ | |
2476 | ||
2477 | if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) { | |
2478 | if (debug_level >= DEBUG_LEVEL_INFO) | |
2479 | printk("%s(%d):mgslpc_close(%s) calling tty_wait_until_sent\n", | |
2480 | __FILE__,__LINE__, info->device_name ); | |
2481 | tty_wait_until_sent(tty, info->closing_wait); | |
2482 | } | |
2483 | ||
2484 | if (info->flags & ASYNC_INITIALIZED) | |
2485 | mgslpc_wait_until_sent(tty, info->timeout); | |
2486 | ||
2487 | if (tty->driver->flush_buffer) | |
2488 | tty->driver->flush_buffer(tty); | |
2489 | ||
2490 | ldisc_flush_buffer(tty); | |
2491 | ||
2492 | shutdown(info); | |
2493 | ||
2494 | tty->closing = 0; | |
2495 | info->tty = NULL; | |
2496 | ||
2497 | if (info->blocked_open) { | |
2498 | if (info->close_delay) { | |
2499 | msleep_interruptible(jiffies_to_msecs(info->close_delay)); | |
2500 | } | |
2501 | wake_up_interruptible(&info->open_wait); | |
2502 | } | |
2503 | ||
2504 | info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); | |
2505 | ||
2506 | wake_up_interruptible(&info->close_wait); | |
2507 | ||
2508 | cleanup: | |
2509 | if (debug_level >= DEBUG_LEVEL_INFO) | |
2510 | printk("%s(%d):mgslpc_close(%s) exit, count=%d\n", __FILE__,__LINE__, | |
2511 | tty->driver->name, info->count); | |
2512 | } | |
2513 | ||
2514 | /* Wait until the transmitter is empty. | |
2515 | */ | |
2516 | static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout) | |
2517 | { | |
2518 | MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data; | |
2519 | unsigned long orig_jiffies, char_time; | |
2520 | ||
2521 | if (!info ) | |
2522 | return; | |
2523 | ||
2524 | if (debug_level >= DEBUG_LEVEL_INFO) | |
2525 | printk("%s(%d):mgslpc_wait_until_sent(%s) entry\n", | |
2526 | __FILE__,__LINE__, info->device_name ); | |
2527 | ||
2528 | if (mgslpc_paranoia_check(info, tty->name, "mgslpc_wait_until_sent")) | |
2529 | return; | |
2530 | ||
2531 | if (!(info->flags & ASYNC_INITIALIZED)) | |
2532 | goto exit; | |
2533 | ||
2534 | orig_jiffies = jiffies; | |
2535 | ||
2536 | /* Set check interval to 1/5 of estimated time to | |
2537 | * send a character, and make it at least 1. The check | |
2538 | * interval should also be less than the timeout. | |
2539 | * Note: use tight timings here to satisfy the NIST-PCTS. | |
2540 | */ | |
2541 | ||
2542 | if ( info->params.data_rate ) { | |
2543 | char_time = info->timeout/(32 * 5); | |
2544 | if (!char_time) | |
2545 | char_time++; | |
2546 | } else | |
2547 | char_time = 1; | |
2548 | ||
2549 | if (timeout) | |
2550 | char_time = min_t(unsigned long, char_time, timeout); | |
2551 | ||
2552 | if (info->params.mode == MGSL_MODE_HDLC) { | |
2553 | while (info->tx_active) { | |
2554 | msleep_interruptible(jiffies_to_msecs(char_time)); | |
2555 | if (signal_pending(current)) | |
2556 | break; | |
2557 | if (timeout && time_after(jiffies, orig_jiffies + timeout)) | |
2558 | break; | |
2559 | } | |
2560 | } else { | |
2561 | while ((info->tx_count || info->tx_active) && | |
2562 | info->tx_enabled) { | |
2563 | msleep_interruptible(jiffies_to_msecs(char_time)); | |
2564 | if (signal_pending(current)) | |
2565 | break; | |
2566 | if (timeout && time_after(jiffies, orig_jiffies + timeout)) | |
2567 | break; | |
2568 | } | |
2569 | } | |
2570 | ||
2571 | exit: | |
2572 | if (debug_level >= DEBUG_LEVEL_INFO) | |
2573 | printk("%s(%d):mgslpc_wait_until_sent(%s) exit\n", | |
2574 | __FILE__,__LINE__, info->device_name ); | |
2575 | } | |
2576 | ||
2577 | /* Called by tty_hangup() when a hangup is signaled. | |
2578 | * This is the same as closing all open files for the port. | |
2579 | */ | |
2580 | static void mgslpc_hangup(struct tty_struct *tty) | |
2581 | { | |
2582 | MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data; | |
2583 | ||
2584 | if (debug_level >= DEBUG_LEVEL_INFO) | |
2585 | printk("%s(%d):mgslpc_hangup(%s)\n", | |
2586 | __FILE__,__LINE__, info->device_name ); | |
2587 | ||
2588 | if (mgslpc_paranoia_check(info, tty->name, "mgslpc_hangup")) | |
2589 | return; | |
2590 | ||
2591 | mgslpc_flush_buffer(tty); | |
2592 | shutdown(info); | |
2593 | ||
2594 | info->count = 0; | |
2595 | info->flags &= ~ASYNC_NORMAL_ACTIVE; | |
2596 | info->tty = NULL; | |
2597 | ||
2598 | wake_up_interruptible(&info->open_wait); | |
2599 | } | |
2600 | ||
2601 | /* Block the current process until the specified port | |
2602 | * is ready to be opened. | |
2603 | */ | |
2604 | static int block_til_ready(struct tty_struct *tty, struct file *filp, | |
2605 | MGSLPC_INFO *info) | |
2606 | { | |
2607 | DECLARE_WAITQUEUE(wait, current); | |
2608 | int retval; | |
2609 | int do_clocal = 0, extra_count = 0; | |
2610 | unsigned long flags; | |
2611 | ||
2612 | if (debug_level >= DEBUG_LEVEL_INFO) | |
2613 | printk("%s(%d):block_til_ready on %s\n", | |
2614 | __FILE__,__LINE__, tty->driver->name ); | |
2615 | ||
2616 | if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){ | |
2617 | /* nonblock mode is set or port is not enabled */ | |
2618 | /* just verify that callout device is not active */ | |
2619 | info->flags |= ASYNC_NORMAL_ACTIVE; | |
2620 | return 0; | |
2621 | } | |
2622 | ||
2623 | if (tty->termios->c_cflag & CLOCAL) | |
2624 | do_clocal = 1; | |
2625 | ||
2626 | /* Wait for carrier detect and the line to become | |
2627 | * free (i.e., not in use by the callout). While we are in | |
2628 | * this loop, info->count is dropped by one, so that | |
2629 | * mgslpc_close() knows when to free things. We restore it upon | |
2630 | * exit, either normal or abnormal. | |
2631 | */ | |
2632 | ||
2633 | retval = 0; | |
2634 | add_wait_queue(&info->open_wait, &wait); | |
2635 | ||
2636 | if (debug_level >= DEBUG_LEVEL_INFO) | |
2637 | printk("%s(%d):block_til_ready before block on %s count=%d\n", | |
2638 | __FILE__,__LINE__, tty->driver->name, info->count ); | |
2639 | ||
2640 | spin_lock_irqsave(&info->lock, flags); | |
2641 | if (!tty_hung_up_p(filp)) { | |
2642 | extra_count = 1; | |
2643 | info->count--; | |
2644 | } | |
2645 | spin_unlock_irqrestore(&info->lock, flags); | |
2646 | info->blocked_open++; | |
2647 | ||
2648 | while (1) { | |
2649 | if ((tty->termios->c_cflag & CBAUD)) { | |
2650 | spin_lock_irqsave(&info->lock,flags); | |
2651 | info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; | |
2652 | set_signals(info); | |
2653 | spin_unlock_irqrestore(&info->lock,flags); | |
2654 | } | |
2655 | ||
2656 | set_current_state(TASK_INTERRUPTIBLE); | |
2657 | ||
2658 | if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)){ | |
2659 | retval = (info->flags & ASYNC_HUP_NOTIFY) ? | |
2660 | -EAGAIN : -ERESTARTSYS; | |
2661 | break; | |
2662 | } | |
2663 | ||
2664 | spin_lock_irqsave(&info->lock,flags); | |
2665 | get_signals(info); | |
2666 | spin_unlock_irqrestore(&info->lock,flags); | |
2667 | ||
2668 | if (!(info->flags & ASYNC_CLOSING) && | |
2669 | (do_clocal || (info->serial_signals & SerialSignal_DCD)) ) { | |
2670 | break; | |
2671 | } | |
2672 | ||
2673 | if (signal_pending(current)) { | |
2674 | retval = -ERESTARTSYS; | |
2675 | break; | |
2676 | } | |
2677 | ||
2678 | if (debug_level >= DEBUG_LEVEL_INFO) | |
2679 | printk("%s(%d):block_til_ready blocking on %s count=%d\n", | |
2680 | __FILE__,__LINE__, tty->driver->name, info->count ); | |
2681 | ||
2682 | schedule(); | |
2683 | } | |
2684 | ||
2685 | set_current_state(TASK_RUNNING); | |
2686 | remove_wait_queue(&info->open_wait, &wait); | |
2687 | ||
2688 | if (extra_count) | |
2689 | info->count++; | |
2690 | info->blocked_open--; | |
2691 | ||
2692 | if (debug_level >= DEBUG_LEVEL_INFO) | |
2693 | printk("%s(%d):block_til_ready after blocking on %s count=%d\n", | |
2694 | __FILE__,__LINE__, tty->driver->name, info->count ); | |
2695 | ||
2696 | if (!retval) | |
2697 | info->flags |= ASYNC_NORMAL_ACTIVE; | |
2698 | ||
2699 | return retval; | |
2700 | } | |
2701 | ||
2702 | static int mgslpc_open(struct tty_struct *tty, struct file * filp) | |
2703 | { | |
2704 | MGSLPC_INFO *info; | |
2705 | int retval, line; | |
2706 | unsigned long flags; | |
2707 | ||
2708 | /* verify range of specified line number */ | |
2709 | line = tty->index; | |
2710 | if ((line < 0) || (line >= mgslpc_device_count)) { | |
2711 | printk("%s(%d):mgslpc_open with invalid line #%d.\n", | |
2712 | __FILE__,__LINE__,line); | |
2713 | return -ENODEV; | |
2714 | } | |
2715 | ||
2716 | /* find the info structure for the specified line */ | |
2717 | info = mgslpc_device_list; | |
2718 | while(info && info->line != line) | |
2719 | info = info->next_device; | |
2720 | if (mgslpc_paranoia_check(info, tty->name, "mgslpc_open")) | |
2721 | return -ENODEV; | |
2722 | ||
2723 | tty->driver_data = info; | |
2724 | info->tty = tty; | |
2725 | ||
2726 | if (debug_level >= DEBUG_LEVEL_INFO) | |
2727 | printk("%s(%d):mgslpc_open(%s), old ref count = %d\n", | |
2728 | __FILE__,__LINE__,tty->driver->name, info->count); | |
2729 | ||
2730 | /* If port is closing, signal caller to try again */ | |
2731 | if (tty_hung_up_p(filp) || info->flags & ASYNC_CLOSING){ | |
2732 | if (info->flags & ASYNC_CLOSING) | |
2733 | interruptible_sleep_on(&info->close_wait); | |
2734 | retval = ((info->flags & ASYNC_HUP_NOTIFY) ? | |
2735 | -EAGAIN : -ERESTARTSYS); | |
2736 | goto cleanup; | |
2737 | } | |
2738 | ||
2739 | info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; | |
2740 | ||
2741 | spin_lock_irqsave(&info->netlock, flags); | |
2742 | if (info->netcount) { | |
2743 | retval = -EBUSY; | |
2744 | spin_unlock_irqrestore(&info->netlock, flags); | |
2745 | goto cleanup; | |
2746 | } | |
2747 | info->count++; | |
2748 | spin_unlock_irqrestore(&info->netlock, flags); | |
2749 | ||
2750 | if (info->count == 1) { | |
2751 | /* 1st open on this device, init hardware */ | |
2752 | retval = startup(info); | |
2753 | if (retval < 0) | |
2754 | goto cleanup; | |
2755 | } | |
2756 | ||
2757 | retval = block_til_ready(tty, filp, info); | |
2758 | if (retval) { | |
2759 | if (debug_level >= DEBUG_LEVEL_INFO) | |
2760 | printk("%s(%d):block_til_ready(%s) returned %d\n", | |
2761 | __FILE__,__LINE__, info->device_name, retval); | |
2762 | goto cleanup; | |
2763 | } | |
2764 | ||
2765 | if (debug_level >= DEBUG_LEVEL_INFO) | |
2766 | printk("%s(%d):mgslpc_open(%s) success\n", | |
2767 | __FILE__,__LINE__, info->device_name); | |
2768 | retval = 0; | |
2769 | ||
2770 | cleanup: | |
2771 | if (retval) { | |
2772 | if (tty->count == 1) | |
2773 | info->tty = NULL; /* tty layer will release tty struct */ | |
2774 | if(info->count) | |
2775 | info->count--; | |
2776 | } | |
2777 | ||
2778 | return retval; | |
2779 | } | |
2780 | ||
2781 | /* | |
2782 | * /proc fs routines.... | |
2783 | */ | |
2784 | ||
2785 | static inline int line_info(char *buf, MGSLPC_INFO *info) | |
2786 | { | |
2787 | char stat_buf[30]; | |
2788 | int ret; | |
2789 | unsigned long flags; | |
2790 | ||
2791 | ret = sprintf(buf, "%s:io:%04X irq:%d", | |
2792 | info->device_name, info->io_base, info->irq_level); | |
2793 | ||
2794 | /* output current serial signal states */ | |
2795 | spin_lock_irqsave(&info->lock,flags); | |
2796 | get_signals(info); | |
2797 | spin_unlock_irqrestore(&info->lock,flags); | |
2798 | ||
2799 | stat_buf[0] = 0; | |
2800 | stat_buf[1] = 0; | |
2801 | if (info->serial_signals & SerialSignal_RTS) | |
2802 | strcat(stat_buf, "|RTS"); | |
2803 | if (info->serial_signals & SerialSignal_CTS) | |
2804 | strcat(stat_buf, "|CTS"); | |
2805 | if (info->serial_signals & SerialSignal_DTR) | |
2806 | strcat(stat_buf, "|DTR"); | |
2807 | if (info->serial_signals & SerialSignal_DSR) | |
2808 | strcat(stat_buf, "|DSR"); | |
2809 | if (info->serial_signals & SerialSignal_DCD) | |
2810 | strcat(stat_buf, "|CD"); | |
2811 | if (info->serial_signals & SerialSignal_RI) | |
2812 | strcat(stat_buf, "|RI"); | |
2813 | ||
2814 | if (info->params.mode == MGSL_MODE_HDLC) { | |
2815 | ret += sprintf(buf+ret, " HDLC txok:%d rxok:%d", | |
2816 | info->icount.txok, info->icount.rxok); | |
2817 | if (info->icount.txunder) | |
2818 | ret += sprintf(buf+ret, " txunder:%d", info->icount.txunder); | |
2819 | if (info->icount.txabort) | |
2820 | ret += sprintf(buf+ret, " txabort:%d", info->icount.txabort); | |
2821 | if (info->icount.rxshort) | |
2822 | ret += sprintf(buf+ret, " rxshort:%d", info->icount.rxshort); | |
2823 | if (info->icount.rxlong) | |
2824 | ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxlong); | |
2825 | if (info->icount.rxover) | |
2826 | ret += sprintf(buf+ret, " rxover:%d", info->icount.rxover); | |
2827 | if (info->icount.rxcrc) | |
2828 | ret += sprintf(buf+ret, " rxcrc:%d", info->icount.rxcrc); | |
2829 | } else { | |
2830 | ret += sprintf(buf+ret, " ASYNC tx:%d rx:%d", | |
2831 | info->icount.tx, info->icount.rx); | |
2832 | if (info->icount.frame) | |
2833 | ret += sprintf(buf+ret, " fe:%d", info->icount.frame); | |
2834 | if (info->icount.parity) | |
2835 | ret += sprintf(buf+ret, " pe:%d", info->icount.parity); | |
2836 | if (info->icount.brk) | |
2837 | ret += sprintf(buf+ret, " brk:%d", info->icount.brk); | |
2838 | if (info->icount.overrun) | |
2839 | ret += sprintf(buf+ret, " oe:%d", info->icount.overrun); | |
2840 | } | |
2841 | ||
2842 | /* Append serial signal status to end */ | |
2843 | ret += sprintf(buf+ret, " %s\n", stat_buf+1); | |
2844 | ||
2845 | ret += sprintf(buf+ret, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n", | |
2846 | info->tx_active,info->bh_requested,info->bh_running, | |
2847 | info->pending_bh); | |
2848 | ||
2849 | return ret; | |
2850 | } | |
2851 | ||
2852 | /* Called to print information about devices | |
2853 | */ | |
2854 | static int mgslpc_read_proc(char *page, char **start, off_t off, int count, | |
2855 | int *eof, void *data) | |
2856 | { | |
2857 | int len = 0, l; | |
2858 | off_t begin = 0; | |
2859 | MGSLPC_INFO *info; | |
2860 | ||
2861 | len += sprintf(page, "synclink driver:%s\n", driver_version); | |
2862 | ||
2863 | info = mgslpc_device_list; | |
2864 | while( info ) { | |
2865 | l = line_info(page + len, info); | |
2866 | len += l; | |
2867 | if (len+begin > off+count) | |
2868 | goto done; | |
2869 | if (len+begin < off) { | |
2870 | begin += len; | |
2871 | len = 0; | |
2872 | } | |
2873 | info = info->next_device; | |
2874 | } | |
2875 | ||
2876 | *eof = 1; | |
2877 | done: | |
2878 | if (off >= len+begin) | |
2879 | return 0; | |
2880 | *start = page + (off-begin); | |
2881 | return ((count < begin+len-off) ? count : begin+len-off); | |
2882 | } | |
2883 | ||
cdaad343 | 2884 | static int rx_alloc_buffers(MGSLPC_INFO *info) |
1da177e4 LT |
2885 | { |
2886 | /* each buffer has header and data */ | |
2887 | info->rx_buf_size = sizeof(RXBUF) + info->max_frame_size; | |
2888 | ||
2889 | /* calculate total allocation size for 8 buffers */ | |
2890 | info->rx_buf_total_size = info->rx_buf_size * 8; | |
2891 | ||
2892 | /* limit total allocated memory */ | |
2893 | if (info->rx_buf_total_size > 0x10000) | |
2894 | info->rx_buf_total_size = 0x10000; | |
2895 | ||
2896 | /* calculate number of buffers */ | |
2897 | info->rx_buf_count = info->rx_buf_total_size / info->rx_buf_size; | |
2898 | ||
2899 | info->rx_buf = kmalloc(info->rx_buf_total_size, GFP_KERNEL); | |
2900 | if (info->rx_buf == NULL) | |
2901 | return -ENOMEM; | |
2902 | ||
2903 | rx_reset_buffers(info); | |
2904 | return 0; | |
2905 | } | |
2906 | ||
cdaad343 | 2907 | static void rx_free_buffers(MGSLPC_INFO *info) |
1da177e4 | 2908 | { |
735d5661 | 2909 | kfree(info->rx_buf); |
1da177e4 LT |
2910 | info->rx_buf = NULL; |
2911 | } | |
2912 | ||
cdaad343 | 2913 | static int claim_resources(MGSLPC_INFO *info) |
1da177e4 LT |
2914 | { |
2915 | if (rx_alloc_buffers(info) < 0 ) { | |
2916 | printk( "Cant allocate rx buffer %s\n", info->device_name); | |
2917 | release_resources(info); | |
2918 | return -ENODEV; | |
2919 | } | |
2920 | return 0; | |
2921 | } | |
2922 | ||
cdaad343 | 2923 | static void release_resources(MGSLPC_INFO *info) |
1da177e4 LT |
2924 | { |
2925 | if (debug_level >= DEBUG_LEVEL_INFO) | |
2926 | printk("release_resources(%s)\n", info->device_name); | |
2927 | rx_free_buffers(info); | |
2928 | } | |
2929 | ||
2930 | /* Add the specified device instance data structure to the | |
2931 | * global linked list of devices and increment the device count. | |
2932 | * | |
2933 | * Arguments: info pointer to device instance data | |
2934 | */ | |
cdaad343 | 2935 | static void mgslpc_add_device(MGSLPC_INFO *info) |
1da177e4 LT |
2936 | { |
2937 | info->next_device = NULL; | |
2938 | info->line = mgslpc_device_count; | |
2939 | sprintf(info->device_name,"ttySLP%d",info->line); | |
2940 | ||
2941 | if (info->line < MAX_DEVICE_COUNT) { | |
2942 | if (maxframe[info->line]) | |
2943 | info->max_frame_size = maxframe[info->line]; | |
2944 | info->dosyncppp = dosyncppp[info->line]; | |
2945 | } | |
2946 | ||
2947 | mgslpc_device_count++; | |
2948 | ||
2949 | if (!mgslpc_device_list) | |
2950 | mgslpc_device_list = info; | |
2951 | else { | |
2952 | MGSLPC_INFO *current_dev = mgslpc_device_list; | |
2953 | while( current_dev->next_device ) | |
2954 | current_dev = current_dev->next_device; | |
2955 | current_dev->next_device = info; | |
2956 | } | |
2957 | ||
2958 | if (info->max_frame_size < 4096) | |
2959 | info->max_frame_size = 4096; | |
2960 | else if (info->max_frame_size > 65535) | |
2961 | info->max_frame_size = 65535; | |
2962 | ||
2963 | printk( "SyncLink PC Card %s:IO=%04X IRQ=%d\n", | |
2964 | info->device_name, info->io_base, info->irq_level); | |
2965 | ||
2966 | #ifdef CONFIG_HDLC | |
2967 | hdlcdev_init(info); | |
2968 | #endif | |
2969 | } | |
2970 | ||
cdaad343 | 2971 | static void mgslpc_remove_device(MGSLPC_INFO *remove_info) |
1da177e4 LT |
2972 | { |
2973 | MGSLPC_INFO *info = mgslpc_device_list; | |
2974 | MGSLPC_INFO *last = NULL; | |
2975 | ||
2976 | while(info) { | |
2977 | if (info == remove_info) { | |
2978 | if (last) | |
2979 | last->next_device = info->next_device; | |
2980 | else | |
2981 | mgslpc_device_list = info->next_device; | |
2982 | #ifdef CONFIG_HDLC | |
2983 | hdlcdev_exit(info); | |
2984 | #endif | |
2985 | release_resources(info); | |
2986 | kfree(info); | |
2987 | mgslpc_device_count--; | |
2988 | return; | |
2989 | } | |
2990 | last = info; | |
2991 | info = info->next_device; | |
2992 | } | |
2993 | } | |
2994 | ||
4af48c8c DB |
2995 | static struct pcmcia_device_id mgslpc_ids[] = { |
2996 | PCMCIA_DEVICE_MANF_CARD(0x02c5, 0x0050), | |
2997 | PCMCIA_DEVICE_NULL | |
2998 | }; | |
2999 | MODULE_DEVICE_TABLE(pcmcia, mgslpc_ids); | |
3000 | ||
1da177e4 LT |
3001 | static struct pcmcia_driver mgslpc_driver = { |
3002 | .owner = THIS_MODULE, | |
3003 | .drv = { | |
3004 | .name = "synclink_cs", | |
3005 | }, | |
15b99ac1 | 3006 | .probe = mgslpc_probe, |
cc3b4866 | 3007 | .remove = mgslpc_detach, |
4af48c8c | 3008 | .id_table = mgslpc_ids, |
98e4c28b DB |
3009 | .suspend = mgslpc_suspend, |
3010 | .resume = mgslpc_resume, | |
1da177e4 LT |
3011 | }; |
3012 | ||
3013 | static struct tty_operations mgslpc_ops = { | |
3014 | .open = mgslpc_open, | |
3015 | .close = mgslpc_close, | |
3016 | .write = mgslpc_write, | |
3017 | .put_char = mgslpc_put_char, | |
3018 | .flush_chars = mgslpc_flush_chars, | |
3019 | .write_room = mgslpc_write_room, | |
3020 | .chars_in_buffer = mgslpc_chars_in_buffer, | |
3021 | .flush_buffer = mgslpc_flush_buffer, | |
3022 | .ioctl = mgslpc_ioctl, | |
3023 | .throttle = mgslpc_throttle, | |
3024 | .unthrottle = mgslpc_unthrottle, | |
3025 | .send_xchar = mgslpc_send_xchar, | |
3026 | .break_ctl = mgslpc_break, | |
3027 | .wait_until_sent = mgslpc_wait_until_sent, | |
3028 | .read_proc = mgslpc_read_proc, | |
3029 | .set_termios = mgslpc_set_termios, | |
3030 | .stop = tx_pause, | |
3031 | .start = tx_release, | |
3032 | .hangup = mgslpc_hangup, | |
3033 | .tiocmget = tiocmget, | |
3034 | .tiocmset = tiocmset, | |
3035 | }; | |
3036 | ||
3037 | static void synclink_cs_cleanup(void) | |
3038 | { | |
3039 | int rc; | |
3040 | ||
3041 | printk("Unloading %s: version %s\n", driver_name, driver_version); | |
3042 | ||
3043 | while(mgslpc_device_list) | |
3044 | mgslpc_remove_device(mgslpc_device_list); | |
3045 | ||
3046 | if (serial_driver) { | |
3047 | if ((rc = tty_unregister_driver(serial_driver))) | |
3048 | printk("%s(%d) failed to unregister tty driver err=%d\n", | |
3049 | __FILE__,__LINE__,rc); | |
3050 | put_tty_driver(serial_driver); | |
3051 | } | |
3052 | ||
3053 | pcmcia_unregister_driver(&mgslpc_driver); | |
1da177e4 LT |
3054 | } |
3055 | ||
3056 | static int __init synclink_cs_init(void) | |
3057 | { | |
3058 | int rc; | |
3059 | ||
3060 | if (break_on_load) { | |
3061 | mgslpc_get_text_ptr(); | |
3062 | BREAKPOINT(); | |
3063 | } | |
3064 | ||
3065 | printk("%s %s\n", driver_name, driver_version); | |
3066 | ||
3067 | if ((rc = pcmcia_register_driver(&mgslpc_driver)) < 0) | |
3068 | return rc; | |
3069 | ||
3070 | serial_driver = alloc_tty_driver(MAX_DEVICE_COUNT); | |
3071 | if (!serial_driver) { | |
3072 | rc = -ENOMEM; | |
3073 | goto error; | |
3074 | } | |
3075 | ||
3076 | /* Initialize the tty_driver structure */ | |
3077 | ||
3078 | serial_driver->owner = THIS_MODULE; | |
3079 | serial_driver->driver_name = "synclink_cs"; | |
3080 | serial_driver->name = "ttySLP"; | |
3081 | serial_driver->major = ttymajor; | |
3082 | serial_driver->minor_start = 64; | |
3083 | serial_driver->type = TTY_DRIVER_TYPE_SERIAL; | |
3084 | serial_driver->subtype = SERIAL_TYPE_NORMAL; | |
3085 | serial_driver->init_termios = tty_std_termios; | |
3086 | serial_driver->init_termios.c_cflag = | |
3087 | B9600 | CS8 | CREAD | HUPCL | CLOCAL; | |
3088 | serial_driver->flags = TTY_DRIVER_REAL_RAW; | |
3089 | tty_set_operations(serial_driver, &mgslpc_ops); | |
3090 | ||
3091 | if ((rc = tty_register_driver(serial_driver)) < 0) { | |
3092 | printk("%s(%d):Couldn't register serial driver\n", | |
3093 | __FILE__,__LINE__); | |
3094 | put_tty_driver(serial_driver); | |
3095 | serial_driver = NULL; | |
3096 | goto error; | |
3097 | } | |
3098 | ||
3099 | printk("%s %s, tty major#%d\n", | |
3100 | driver_name, driver_version, | |
3101 | serial_driver->major); | |
3102 | ||
3103 | return 0; | |
3104 | ||
3105 | error: | |
3106 | synclink_cs_cleanup(); | |
3107 | return rc; | |
3108 | } | |
3109 | ||
3110 | static void __exit synclink_cs_exit(void) | |
3111 | { | |
3112 | synclink_cs_cleanup(); | |
3113 | } | |
3114 | ||
3115 | module_init(synclink_cs_init); | |
3116 | module_exit(synclink_cs_exit); | |
3117 | ||
3118 | static void mgslpc_set_rate(MGSLPC_INFO *info, unsigned char channel, unsigned int rate) | |
3119 | { | |
3120 | unsigned int M, N; | |
3121 | unsigned char val; | |
3122 | ||
3123 | /* note:standard BRG mode is broken in V3.2 chip | |
3124 | * so enhanced mode is always used | |
3125 | */ | |
3126 | ||
3127 | if (rate) { | |
3128 | N = 3686400 / rate; | |
3129 | if (!N) | |
3130 | N = 1; | |
3131 | N >>= 1; | |
3132 | for (M = 1; N > 64 && M < 16; M++) | |
3133 | N >>= 1; | |
3134 | N--; | |
3135 | ||
3136 | /* BGR[5..0] = N | |
3137 | * BGR[9..6] = M | |
3138 | * BGR[7..0] contained in BGR register | |
3139 | * BGR[9..8] contained in CCR2[7..6] | |
3140 | * divisor = (N+1)*2^M | |
3141 | * | |
3142 | * Note: M *must* not be zero (causes asymetric duty cycle) | |
3143 | */ | |
3144 | write_reg(info, (unsigned char) (channel + BGR), | |
3145 | (unsigned char) ((M << 6) + N)); | |
3146 | val = read_reg(info, (unsigned char) (channel + CCR2)) & 0x3f; | |
3147 | val |= ((M << 4) & 0xc0); | |
3148 | write_reg(info, (unsigned char) (channel + CCR2), val); | |
3149 | } | |
3150 | } | |
3151 | ||
3152 | /* Enabled the AUX clock output at the specified frequency. | |
3153 | */ | |
3154 | static void enable_auxclk(MGSLPC_INFO *info) | |
3155 | { | |
3156 | unsigned char val; | |
3157 | ||
3158 | /* MODE | |
3159 | * | |
3160 | * 07..06 MDS[1..0] 10 = transparent HDLC mode | |
3161 | * 05 ADM Address Mode, 0 = no addr recognition | |
3162 | * 04 TMD Timer Mode, 0 = external | |
3163 | * 03 RAC Receiver Active, 0 = inactive | |
3164 | * 02 RTS 0=RTS active during xmit, 1=RTS always active | |
3165 | * 01 TRS Timer Resolution, 1=512 | |
3166 | * 00 TLP Test Loop, 0 = no loop | |
3167 | * | |
3168 | * 1000 0010 | |
3169 | */ | |
3170 | val = 0x82; | |
3171 | ||
3172 | /* channel B RTS is used to enable AUXCLK driver on SP505 */ | |
3173 | if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed) | |
3174 | val |= BIT2; | |
3175 | write_reg(info, CHB + MODE, val); | |
3176 | ||
3177 | /* CCR0 | |
3178 | * | |
3179 | * 07 PU Power Up, 1=active, 0=power down | |
3180 | * 06 MCE Master Clock Enable, 1=enabled | |
3181 | * 05 Reserved, 0 | |
3182 | * 04..02 SC[2..0] Encoding | |
3183 | * 01..00 SM[1..0] Serial Mode, 00=HDLC | |
3184 | * | |
3185 | * 11000000 | |
3186 | */ | |
3187 | write_reg(info, CHB + CCR0, 0xc0); | |
3188 | ||
3189 | /* CCR1 | |
3190 | * | |
3191 | * 07 SFLG Shared Flag, 0 = disable shared flags | |
3192 | * 06 GALP Go Active On Loop, 0 = not used | |
3193 | * 05 GLP Go On Loop, 0 = not used | |
3194 | * 04 ODS Output Driver Select, 1=TxD is push-pull output | |
3195 | * 03 ITF Interframe Time Fill, 0=mark, 1=flag | |
3196 | * 02..00 CM[2..0] Clock Mode | |
3197 | * | |
3198 | * 0001 0111 | |
3199 | */ | |
3200 | write_reg(info, CHB + CCR1, 0x17); | |
3201 | ||
3202 | /* CCR2 (Channel B) | |
3203 | * | |
3204 | * 07..06 BGR[9..8] Baud rate bits 9..8 | |
3205 | * 05 BDF Baud rate divisor factor, 0=1, 1=BGR value | |
3206 | * 04 SSEL Clock source select, 1=submode b | |
3207 | * 03 TOE 0=TxCLK is input, 1=TxCLK is output | |
3208 | * 02 RWX Read/Write Exchange 0=disabled | |
3209 | * 01 C32, CRC select, 0=CRC-16, 1=CRC-32 | |
3210 | * 00 DIV, data inversion 0=disabled, 1=enabled | |
3211 | * | |
3212 | * 0011 1000 | |
3213 | */ | |
3214 | if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed) | |
3215 | write_reg(info, CHB + CCR2, 0x38); | |
3216 | else | |
3217 | write_reg(info, CHB + CCR2, 0x30); | |
3218 | ||
3219 | /* CCR4 | |
3220 | * | |
3221 | * 07 MCK4 Master Clock Divide by 4, 1=enabled | |
3222 | * 06 EBRG Enhanced Baud Rate Generator Mode, 1=enabled | |
3223 | * 05 TST1 Test Pin, 0=normal operation | |
3224 | * 04 ICD Ivert Carrier Detect, 1=enabled (active low) | |
3225 | * 03..02 Reserved, must be 0 | |
3226 | * 01..00 RFT[1..0] RxFIFO Threshold 00=32 bytes | |
3227 | * | |
3228 | * 0101 0000 | |
3229 | */ | |
3230 | write_reg(info, CHB + CCR4, 0x50); | |
3231 | ||
3232 | /* if auxclk not enabled, set internal BRG so | |
3233 | * CTS transitions can be detected (requires TxC) | |
3234 | */ | |
3235 | if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed) | |
3236 | mgslpc_set_rate(info, CHB, info->params.clock_speed); | |
3237 | else | |
3238 | mgslpc_set_rate(info, CHB, 921600); | |
3239 | } | |
3240 | ||
3241 | static void loopback_enable(MGSLPC_INFO *info) | |
3242 | { | |
3243 | unsigned char val; | |
3244 | ||
3245 | /* CCR1:02..00 CM[2..0] Clock Mode = 111 (clock mode 7) */ | |
3246 | val = read_reg(info, CHA + CCR1) | (BIT2 + BIT1 + BIT0); | |
3247 | write_reg(info, CHA + CCR1, val); | |
3248 | ||
3249 | /* CCR2:04 SSEL Clock source select, 1=submode b */ | |
3250 | val = read_reg(info, CHA + CCR2) | (BIT4 + BIT5); | |
3251 | write_reg(info, CHA + CCR2, val); | |
3252 | ||
3253 | /* set LinkSpeed if available, otherwise default to 2Mbps */ | |
3254 | if (info->params.clock_speed) | |
3255 | mgslpc_set_rate(info, CHA, info->params.clock_speed); | |
3256 | else | |
3257 | mgslpc_set_rate(info, CHA, 1843200); | |
3258 | ||
3259 | /* MODE:00 TLP Test Loop, 1=loopback enabled */ | |
3260 | val = read_reg(info, CHA + MODE) | BIT0; | |
3261 | write_reg(info, CHA + MODE, val); | |
3262 | } | |
3263 | ||
cdaad343 | 3264 | static void hdlc_mode(MGSLPC_INFO *info) |
1da177e4 LT |
3265 | { |
3266 | unsigned char val; | |
3267 | unsigned char clkmode, clksubmode; | |
3268 | ||
3269 | /* disable all interrupts */ | |
3270 | irq_disable(info, CHA, 0xffff); | |
3271 | irq_disable(info, CHB, 0xffff); | |
3272 | port_irq_disable(info, 0xff); | |
3273 | ||
3274 | /* assume clock mode 0a, rcv=RxC xmt=TxC */ | |
3275 | clkmode = clksubmode = 0; | |
3276 | if (info->params.flags & HDLC_FLAG_RXC_DPLL | |
3277 | && info->params.flags & HDLC_FLAG_TXC_DPLL) { | |
3278 | /* clock mode 7a, rcv = DPLL, xmt = DPLL */ | |
3279 | clkmode = 7; | |
3280 | } else if (info->params.flags & HDLC_FLAG_RXC_BRG | |
3281 | && info->params.flags & HDLC_FLAG_TXC_BRG) { | |
3282 | /* clock mode 7b, rcv = BRG, xmt = BRG */ | |
3283 | clkmode = 7; | |
3284 | clksubmode = 1; | |
3285 | } else if (info->params.flags & HDLC_FLAG_RXC_DPLL) { | |
3286 | if (info->params.flags & HDLC_FLAG_TXC_BRG) { | |
3287 | /* clock mode 6b, rcv = DPLL, xmt = BRG/16 */ | |
3288 | clkmode = 6; | |
3289 | clksubmode = 1; | |
3290 | } else { | |
3291 | /* clock mode 6a, rcv = DPLL, xmt = TxC */ | |
3292 | clkmode = 6; | |
3293 | } | |
3294 | } else if (info->params.flags & HDLC_FLAG_TXC_BRG) { | |
3295 | /* clock mode 0b, rcv = RxC, xmt = BRG */ | |
3296 | clksubmode = 1; | |
3297 | } | |
3298 | ||
3299 | /* MODE | |
3300 | * | |
3301 | * 07..06 MDS[1..0] 10 = transparent HDLC mode | |
3302 | * 05 ADM Address Mode, 0 = no addr recognition | |
3303 | * 04 TMD Timer Mode, 0 = external | |
3304 | * 03 RAC Receiver Active, 0 = inactive | |
3305 | * 02 RTS 0=RTS active during xmit, 1=RTS always active | |
3306 | * 01 TRS Timer Resolution, 1=512 | |
3307 | * 00 TLP Test Loop, 0 = no loop | |
3308 | * | |
3309 | * 1000 0010 | |
3310 | */ | |
3311 | val = 0x82; | |
3312 | if (info->params.loopback) | |
3313 | val |= BIT0; | |
3314 | ||
3315 | /* preserve RTS state */ | |
3316 | if (info->serial_signals & SerialSignal_RTS) | |
3317 | val |= BIT2; | |
3318 | write_reg(info, CHA + MODE, val); | |
3319 | ||
3320 | /* CCR0 | |
3321 | * | |
3322 | * 07 PU Power Up, 1=active, 0=power down | |
3323 | * 06 MCE Master Clock Enable, 1=enabled | |
3324 | * 05 Reserved, 0 | |
3325 | * 04..02 SC[2..0] Encoding | |
3326 | * 01..00 SM[1..0] Serial Mode, 00=HDLC | |
3327 | * | |
3328 | * 11000000 | |
3329 | */ | |
3330 | val = 0xc0; | |
3331 | switch (info->params.encoding) | |
3332 | { | |
3333 | case HDLC_ENCODING_NRZI: | |
3334 | val |= BIT3; | |
3335 | break; | |
3336 | case HDLC_ENCODING_BIPHASE_SPACE: | |
3337 | val |= BIT4; | |
3338 | break; // FM0 | |
3339 | case HDLC_ENCODING_BIPHASE_MARK: | |
3340 | val |= BIT4 + BIT2; | |
3341 | break; // FM1 | |
3342 | case HDLC_ENCODING_BIPHASE_LEVEL: | |
3343 | val |= BIT4 + BIT3; | |
3344 | break; // Manchester | |
3345 | } | |
3346 | write_reg(info, CHA + CCR0, val); | |
3347 | ||
3348 | /* CCR1 | |
3349 | * | |
3350 | * 07 SFLG Shared Flag, 0 = disable shared flags | |
3351 | * 06 GALP Go Active On Loop, 0 = not used | |
3352 | * 05 GLP Go On Loop, 0 = not used | |
3353 | * 04 ODS Output Driver Select, 1=TxD is push-pull output | |
3354 | * 03 ITF Interframe Time Fill, 0=mark, 1=flag | |
3355 | * 02..00 CM[2..0] Clock Mode | |
3356 | * | |
3357 | * 0001 0000 | |
3358 | */ | |
3359 | val = 0x10 + clkmode; | |
3360 | write_reg(info, CHA + CCR1, val); | |
3361 | ||
3362 | /* CCR2 | |
3363 | * | |
3364 | * 07..06 BGR[9..8] Baud rate bits 9..8 | |
3365 | * 05 BDF Baud rate divisor factor, 0=1, 1=BGR value | |
3366 | * 04 SSEL Clock source select, 1=submode b | |
3367 | * 03 TOE 0=TxCLK is input, 0=TxCLK is input | |
3368 | * 02 RWX Read/Write Exchange 0=disabled | |
3369 | * 01 C32, CRC select, 0=CRC-16, 1=CRC-32 | |
3370 | * 00 DIV, data inversion 0=disabled, 1=enabled | |
3371 | * | |
3372 | * 0000 0000 | |
3373 | */ | |
3374 | val = 0x00; | |
3375 | if (clkmode == 2 || clkmode == 3 || clkmode == 6 | |
3376 | || clkmode == 7 || (clkmode == 0 && clksubmode == 1)) | |
3377 | val |= BIT5; | |
3378 | if (clksubmode) | |
3379 | val |= BIT4; | |
3380 | if (info->params.crc_type == HDLC_CRC_32_CCITT) | |
3381 | val |= BIT1; | |
3382 | if (info->params.encoding == HDLC_ENCODING_NRZB) | |
3383 | val |= BIT0; | |
3384 | write_reg(info, CHA + CCR2, val); | |
3385 | ||
3386 | /* CCR3 | |
3387 | * | |
3388 | * 07..06 PRE[1..0] Preamble count 00=1, 01=2, 10=4, 11=8 | |
3389 | * 05 EPT Enable preamble transmission, 1=enabled | |
3390 | * 04 RADD Receive address pushed to FIFO, 0=disabled | |
3391 | * 03 CRL CRC Reset Level, 0=FFFF | |
3392 | * 02 RCRC Rx CRC 0=On 1=Off | |
3393 | * 01 TCRC Tx CRC 0=On 1=Off | |
3394 | * 00 PSD DPLL Phase Shift Disable | |
3395 | * | |
3396 | * 0000 0000 | |
3397 | */ | |
3398 | val = 0x00; | |
3399 | if (info->params.crc_type == HDLC_CRC_NONE) | |
3400 | val |= BIT2 + BIT1; | |
3401 | if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE) | |
3402 | val |= BIT5; | |
3403 | switch (info->params.preamble_length) | |
3404 | { | |
3405 | case HDLC_PREAMBLE_LENGTH_16BITS: | |
3406 | val |= BIT6; | |
3407 | break; | |
3408 | case HDLC_PREAMBLE_LENGTH_32BITS: | |
3409 | val |= BIT6; | |
3410 | break; | |
3411 | case HDLC_PREAMBLE_LENGTH_64BITS: | |
3412 | val |= BIT7 + BIT6; | |
3413 | break; | |
3414 | } | |
3415 | write_reg(info, CHA + CCR3, val); | |
3416 | ||
3417 | /* PRE - Preamble pattern */ | |
3418 | val = 0; | |
3419 | switch (info->params.preamble) | |
3420 | { | |
3421 | case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break; | |
3422 | case HDLC_PREAMBLE_PATTERN_10: val = 0xaa; break; | |
3423 | case HDLC_PREAMBLE_PATTERN_01: val = 0x55; break; | |
3424 | case HDLC_PREAMBLE_PATTERN_ONES: val = 0xff; break; | |
3425 | } | |
3426 | write_reg(info, CHA + PRE, val); | |
3427 | ||
3428 | /* CCR4 | |
3429 | * | |
3430 | * 07 MCK4 Master Clock Divide by 4, 1=enabled | |
3431 | * 06 EBRG Enhanced Baud Rate Generator Mode, 1=enabled | |
3432 | * 05 TST1 Test Pin, 0=normal operation | |
3433 | * 04 ICD Ivert Carrier Detect, 1=enabled (active low) | |
3434 | * 03..02 Reserved, must be 0 | |
3435 | * 01..00 RFT[1..0] RxFIFO Threshold 00=32 bytes | |
3436 | * | |
3437 | * 0101 0000 | |
3438 | */ | |
3439 | val = 0x50; | |
3440 | write_reg(info, CHA + CCR4, val); | |
3441 | if (info->params.flags & HDLC_FLAG_RXC_DPLL) | |
3442 | mgslpc_set_rate(info, CHA, info->params.clock_speed * 16); | |
3443 | else | |
3444 | mgslpc_set_rate(info, CHA, info->params.clock_speed); | |
3445 | ||
3446 | /* RLCR Receive length check register | |
3447 | * | |
3448 | * 7 1=enable receive length check | |
3449 | * 6..0 Max frame length = (RL + 1) * 32 | |
3450 | */ | |
3451 | write_reg(info, CHA + RLCR, 0); | |
3452 | ||
3453 | /* XBCH Transmit Byte Count High | |
3454 | * | |
3455 | * 07 DMA mode, 0 = interrupt driven | |
3456 | * 06 NRM, 0=ABM (ignored) | |
3457 | * 05 CAS Carrier Auto Start | |
3458 | * 04 XC Transmit Continuously (ignored) | |
3459 | * 03..00 XBC[10..8] Transmit byte count bits 10..8 | |
3460 | * | |
3461 | * 0000 0000 | |
3462 | */ | |
3463 | val = 0x00; | |
3464 | if (info->params.flags & HDLC_FLAG_AUTO_DCD) | |
3465 | val |= BIT5; | |
3466 | write_reg(info, CHA + XBCH, val); | |
3467 | enable_auxclk(info); | |
3468 | if (info->params.loopback || info->testing_irq) | |
3469 | loopback_enable(info); | |
3470 | if (info->params.flags & HDLC_FLAG_AUTO_CTS) | |
3471 | { | |
3472 | irq_enable(info, CHB, IRQ_CTS); | |
3473 | /* PVR[3] 1=AUTO CTS active */ | |
3474 | set_reg_bits(info, CHA + PVR, BIT3); | |
3475 | } else | |
3476 | clear_reg_bits(info, CHA + PVR, BIT3); | |
3477 | ||
3478 | irq_enable(info, CHA, | |
3479 | IRQ_RXEOM + IRQ_RXFIFO + IRQ_ALLSENT + | |
3480 | IRQ_UNDERRUN + IRQ_TXFIFO); | |
3481 | issue_command(info, CHA, CMD_TXRESET + CMD_RXRESET); | |
3482 | wait_command_complete(info, CHA); | |
3483 | read_reg16(info, CHA + ISR); /* clear pending IRQs */ | |
3484 | ||
3485 | /* Master clock mode enabled above to allow reset commands | |
3486 | * to complete even if no data clocks are present. | |
3487 | * | |
3488 | * Disable master clock mode for normal communications because | |
3489 | * V3.2 of the ESCC2 has a bug that prevents the transmit all sent | |
3490 | * IRQ when in master clock mode. | |
3491 | * | |
3492 | * Leave master clock mode enabled for IRQ test because the | |
3493 | * timer IRQ used by the test can only happen in master clock mode. | |
3494 | */ | |
3495 | if (!info->testing_irq) | |
3496 | clear_reg_bits(info, CHA + CCR0, BIT6); | |
3497 | ||
3498 | tx_set_idle(info); | |
3499 | ||
3500 | tx_stop(info); | |
3501 | rx_stop(info); | |
3502 | } | |
3503 | ||
cdaad343 | 3504 | static void rx_stop(MGSLPC_INFO *info) |
1da177e4 LT |
3505 | { |
3506 | if (debug_level >= DEBUG_LEVEL_ISR) | |
3507 | printk("%s(%d):rx_stop(%s)\n", | |
3508 | __FILE__,__LINE__, info->device_name ); | |
3509 | ||
3510 | /* MODE:03 RAC Receiver Active, 0=inactive */ | |
3511 | clear_reg_bits(info, CHA + MODE, BIT3); | |
3512 | ||
3513 | info->rx_enabled = 0; | |
3514 | info->rx_overflow = 0; | |
3515 | } | |
3516 | ||
cdaad343 | 3517 | static void rx_start(MGSLPC_INFO *info) |
1da177e4 LT |
3518 | { |
3519 | if (debug_level >= DEBUG_LEVEL_ISR) | |
3520 | printk("%s(%d):rx_start(%s)\n", | |
3521 | __FILE__,__LINE__, info->device_name ); | |
3522 | ||
3523 | rx_reset_buffers(info); | |
3524 | info->rx_enabled = 0; | |
3525 | info->rx_overflow = 0; | |
3526 | ||
3527 | /* MODE:03 RAC Receiver Active, 1=active */ | |
3528 | set_reg_bits(info, CHA + MODE, BIT3); | |
3529 | ||
3530 | info->rx_enabled = 1; | |
3531 | } | |
3532 | ||
cdaad343 | 3533 | static void tx_start(MGSLPC_INFO *info) |
1da177e4 LT |
3534 | { |
3535 | if (debug_level >= DEBUG_LEVEL_ISR) | |
3536 | printk("%s(%d):tx_start(%s)\n", | |
3537 | __FILE__,__LINE__, info->device_name ); | |
3538 | ||
3539 | if (info->tx_count) { | |
3540 | /* If auto RTS enabled and RTS is inactive, then assert */ | |
3541 | /* RTS and set a flag indicating that the driver should */ | |
3542 | /* negate RTS when the transmission completes. */ | |
3543 | info->drop_rts_on_tx_done = 0; | |
3544 | ||
3545 | if (info->params.flags & HDLC_FLAG_AUTO_RTS) { | |
3546 | get_signals(info); | |
3547 | if (!(info->serial_signals & SerialSignal_RTS)) { | |
3548 | info->serial_signals |= SerialSignal_RTS; | |
3549 | set_signals(info); | |
3550 | info->drop_rts_on_tx_done = 1; | |
3551 | } | |
3552 | } | |
3553 | ||
3554 | if (info->params.mode == MGSL_MODE_ASYNC) { | |
3555 | if (!info->tx_active) { | |
3556 | info->tx_active = 1; | |
3557 | tx_ready(info); | |
3558 | } | |
3559 | } else { | |
3560 | info->tx_active = 1; | |
3561 | tx_ready(info); | |
3562 | info->tx_timer.expires = jiffies + msecs_to_jiffies(5000); | |
3563 | add_timer(&info->tx_timer); | |
3564 | } | |
3565 | } | |
3566 | ||
3567 | if (!info->tx_enabled) | |
3568 | info->tx_enabled = 1; | |
3569 | } | |
3570 | ||
cdaad343 | 3571 | static void tx_stop(MGSLPC_INFO *info) |
1da177e4 LT |
3572 | { |
3573 | if (debug_level >= DEBUG_LEVEL_ISR) | |
3574 | printk("%s(%d):tx_stop(%s)\n", | |
3575 | __FILE__,__LINE__, info->device_name ); | |
3576 | ||
3577 | del_timer(&info->tx_timer); | |
3578 | ||
3579 | info->tx_enabled = 0; | |
3580 | info->tx_active = 0; | |
3581 | } | |
3582 | ||
3583 | /* Reset the adapter to a known state and prepare it for further use. | |
3584 | */ | |
cdaad343 | 3585 | static void reset_device(MGSLPC_INFO *info) |
1da177e4 LT |
3586 | { |
3587 | /* power up both channels (set BIT7) */ | |
3588 | write_reg(info, CHA + CCR0, 0x80); | |
3589 | write_reg(info, CHB + CCR0, 0x80); | |
3590 | write_reg(info, CHA + MODE, 0); | |
3591 | write_reg(info, CHB + MODE, 0); | |
3592 | ||
3593 | /* disable all interrupts */ | |
3594 | irq_disable(info, CHA, 0xffff); | |
3595 | irq_disable(info, CHB, 0xffff); | |
3596 | port_irq_disable(info, 0xff); | |
3597 | ||
3598 | /* PCR Port Configuration Register | |
3599 | * | |
3600 | * 07..04 DEC[3..0] Serial I/F select outputs | |
3601 | * 03 output, 1=AUTO CTS control enabled | |
3602 | * 02 RI Ring Indicator input 0=active | |
3603 | * 01 DSR input 0=active | |
3604 | * 00 DTR output 0=active | |
3605 | * | |
3606 | * 0000 0110 | |
3607 | */ | |
3608 | write_reg(info, PCR, 0x06); | |
3609 | ||
3610 | /* PVR Port Value Register | |
3611 | * | |
3612 | * 07..04 DEC[3..0] Serial I/F select (0000=disabled) | |
3613 | * 03 AUTO CTS output 1=enabled | |
3614 | * 02 RI Ring Indicator input | |
3615 | * 01 DSR input | |
3616 | * 00 DTR output (1=inactive) | |
3617 | * | |
3618 | * 0000 0001 | |
3619 | */ | |
3620 | // write_reg(info, PVR, PVR_DTR); | |
3621 | ||
3622 | /* IPC Interrupt Port Configuration | |
3623 | * | |
3624 | * 07 VIS 1=Masked interrupts visible | |
3625 | * 06..05 Reserved, 0 | |
3626 | * 04..03 SLA Slave address, 00 ignored | |
3627 | * 02 CASM Cascading Mode, 1=daisy chain | |
3628 | * 01..00 IC[1..0] Interrupt Config, 01=push-pull output, active low | |
3629 | * | |
3630 | * 0000 0101 | |
3631 | */ | |
3632 | write_reg(info, IPC, 0x05); | |
3633 | } | |
3634 | ||
cdaad343 | 3635 | static void async_mode(MGSLPC_INFO *info) |
1da177e4 LT |
3636 | { |
3637 | unsigned char val; | |
3638 | ||
3639 | /* disable all interrupts */ | |
3640 | irq_disable(info, CHA, 0xffff); | |
3641 | irq_disable(info, CHB, 0xffff); | |
3642 | port_irq_disable(info, 0xff); | |
3643 | ||
3644 | /* MODE | |
3645 | * | |
3646 | * 07 Reserved, 0 | |
3647 | * 06 FRTS RTS State, 0=active | |
3648 | * 05 FCTS Flow Control on CTS | |
3649 | * 04 FLON Flow Control Enable | |
3650 | * 03 RAC Receiver Active, 0 = inactive | |
3651 | * 02 RTS 0=Auto RTS, 1=manual RTS | |
3652 | * 01 TRS Timer Resolution, 1=512 | |
3653 | * 00 TLP Test Loop, 0 = no loop | |
3654 | * | |
3655 | * 0000 0110 | |
3656 | */ | |
3657 | val = 0x06; | |
3658 | if (info->params.loopback) | |
3659 | val |= BIT0; | |
3660 | ||
3661 | /* preserve RTS state */ | |
3662 | if (!(info->serial_signals & SerialSignal_RTS)) | |
3663 | val |= BIT6; | |
3664 | write_reg(info, CHA + MODE, val); | |
3665 | ||
3666 | /* CCR0 | |
3667 | * | |
3668 | * 07 PU Power Up, 1=active, 0=power down | |
3669 | * 06 MCE Master Clock Enable, 1=enabled | |
3670 | * 05 Reserved, 0 | |
3671 | * 04..02 SC[2..0] Encoding, 000=NRZ | |
3672 | * 01..00 SM[1..0] Serial Mode, 11=Async | |
3673 | * | |
3674 | * 1000 0011 | |
3675 | */ | |
3676 | write_reg(info, CHA + CCR0, 0x83); | |
3677 | ||
3678 | /* CCR1 | |
3679 | * | |
3680 | * 07..05 Reserved, 0 | |
3681 | * 04 ODS Output Driver Select, 1=TxD is push-pull output | |
3682 | * 03 BCR Bit Clock Rate, 1=16x | |
3683 | * 02..00 CM[2..0] Clock Mode, 111=BRG | |
3684 | * | |
3685 | * 0001 1111 | |
3686 | */ | |
3687 | write_reg(info, CHA + CCR1, 0x1f); | |
3688 | ||
3689 | /* CCR2 (channel A) | |
3690 | * | |
3691 | * 07..06 BGR[9..8] Baud rate bits 9..8 | |
3692 | * 05 BDF Baud rate divisor factor, 0=1, 1=BGR value | |
3693 | * 04 SSEL Clock source select, 1=submode b | |
3694 | * 03 TOE 0=TxCLK is input, 0=TxCLK is input | |
3695 | * 02 RWX Read/Write Exchange 0=disabled | |
3696 | * 01 Reserved, 0 | |
3697 | * 00 DIV, data inversion 0=disabled, 1=enabled | |
3698 | * | |
3699 | * 0001 0000 | |
3700 | */ | |
3701 | write_reg(info, CHA + CCR2, 0x10); | |
3702 | ||
3703 | /* CCR3 | |
3704 | * | |
3705 | * 07..01 Reserved, 0 | |
3706 | * 00 PSD DPLL Phase Shift Disable | |
3707 | * | |
3708 | * 0000 0000 | |
3709 | */ | |
3710 | write_reg(info, CHA + CCR3, 0); | |
3711 | ||
3712 | /* CCR4 | |
3713 | * | |
3714 | * 07 MCK4 Master Clock Divide by 4, 1=enabled | |
3715 | * 06 EBRG Enhanced Baud Rate Generator Mode, 1=enabled | |
3716 | * 05 TST1 Test Pin, 0=normal operation | |
3717 | * 04 ICD Ivert Carrier Detect, 1=enabled (active low) | |
3718 | * 03..00 Reserved, must be 0 | |
3719 | * | |
3720 | * 0101 0000 | |
3721 | */ | |
3722 | write_reg(info, CHA + CCR4, 0x50); | |
3723 | mgslpc_set_rate(info, CHA, info->params.data_rate * 16); | |
3724 | ||
3725 | /* DAFO Data Format | |
3726 | * | |
3727 | * 07 Reserved, 0 | |
3728 | * 06 XBRK transmit break, 0=normal operation | |
3729 | * 05 Stop bits (0=1, 1=2) | |
3730 | * 04..03 PAR[1..0] Parity (01=odd, 10=even) | |
3731 | * 02 PAREN Parity Enable | |
3732 | * 01..00 CHL[1..0] Character Length (00=8, 01=7) | |
3733 | * | |
3734 | */ | |
3735 | val = 0x00; | |
3736 | if (info->params.data_bits != 8) | |
3737 | val |= BIT0; /* 7 bits */ | |
3738 | if (info->params.stop_bits != 1) | |
3739 | val |= BIT5; | |
3740 | if (info->params.parity != ASYNC_PARITY_NONE) | |
3741 | { | |
3742 | val |= BIT2; /* Parity enable */ | |
3743 | if (info->params.parity == ASYNC_PARITY_ODD) | |
3744 | val |= BIT3; | |
3745 | else | |
3746 | val |= BIT4; | |
3747 | } | |
3748 | write_reg(info, CHA + DAFO, val); | |
3749 | ||
3750 | /* RFC Rx FIFO Control | |
3751 | * | |
3752 | * 07 Reserved, 0 | |
3753 | * 06 DPS, 1=parity bit not stored in data byte | |
3754 | * 05 DXS, 0=all data stored in FIFO (including XON/XOFF) | |
3755 | * 04 RFDF Rx FIFO Data Format, 1=status byte stored in FIFO | |
3756 | * 03..02 RFTH[1..0], rx threshold, 11=16 status + 16 data byte | |
3757 | * 01 Reserved, 0 | |
3758 | * 00 TCDE Terminate Char Detect Enable, 0=disabled | |
3759 | * | |
3760 | * 0101 1100 | |
3761 | */ | |
3762 | write_reg(info, CHA + RFC, 0x5c); | |
3763 | ||
3764 | /* RLCR Receive length check register | |
3765 | * | |
3766 | * Max frame length = (RL + 1) * 32 | |
3767 | */ | |
3768 | write_reg(info, CHA + RLCR, 0); | |
3769 | ||
3770 | /* XBCH Transmit Byte Count High | |
3771 | * | |
3772 | * 07 DMA mode, 0 = interrupt driven | |
3773 | * 06 NRM, 0=ABM (ignored) | |
3774 | * 05 CAS Carrier Auto Start | |
3775 | * 04 XC Transmit Continuously (ignored) | |
3776 | * 03..00 XBC[10..8] Transmit byte count bits 10..8 | |
3777 | * | |
3778 | * 0000 0000 | |
3779 | */ | |
3780 | val = 0x00; | |
3781 | if (info->params.flags & HDLC_FLAG_AUTO_DCD) | |
3782 | val |= BIT5; | |
3783 | write_reg(info, CHA + XBCH, val); | |
3784 | if (info->params.flags & HDLC_FLAG_AUTO_CTS) | |
3785 | irq_enable(info, CHA, IRQ_CTS); | |
3786 | ||
3787 | /* MODE:03 RAC Receiver Active, 1=active */ | |
3788 | set_reg_bits(info, CHA + MODE, BIT3); | |
3789 | enable_auxclk(info); | |
3790 | if (info->params.flags & HDLC_FLAG_AUTO_CTS) { | |
3791 | irq_enable(info, CHB, IRQ_CTS); | |
3792 | /* PVR[3] 1=AUTO CTS active */ | |
3793 | set_reg_bits(info, CHA + PVR, BIT3); | |
3794 | } else | |
3795 | clear_reg_bits(info, CHA + PVR, BIT3); | |
3796 | irq_enable(info, CHA, | |
3797 | IRQ_RXEOM + IRQ_RXFIFO + IRQ_BREAK_ON + IRQ_RXTIME + | |
3798 | IRQ_ALLSENT + IRQ_TXFIFO); | |
3799 | issue_command(info, CHA, CMD_TXRESET + CMD_RXRESET); | |
3800 | wait_command_complete(info, CHA); | |
3801 | read_reg16(info, CHA + ISR); /* clear pending IRQs */ | |
3802 | } | |
3803 | ||
3804 | /* Set the HDLC idle mode for the transmitter. | |
3805 | */ | |
cdaad343 | 3806 | static void tx_set_idle(MGSLPC_INFO *info) |
1da177e4 LT |
3807 | { |
3808 | /* Note: ESCC2 only supports flags and one idle modes */ | |
3809 | if (info->idle_mode == HDLC_TXIDLE_FLAGS) | |
3810 | set_reg_bits(info, CHA + CCR1, BIT3); | |
3811 | else | |
3812 | clear_reg_bits(info, CHA + CCR1, BIT3); | |
3813 | } | |
3814 | ||
3815 | /* get state of the V24 status (input) signals. | |
3816 | */ | |
cdaad343 | 3817 | static void get_signals(MGSLPC_INFO *info) |
1da177e4 LT |
3818 | { |
3819 | unsigned char status = 0; | |
3820 | ||
3821 | /* preserve DTR and RTS */ | |
3822 | info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS; | |
3823 | ||
3824 | if (read_reg(info, CHB + VSTR) & BIT7) | |
3825 | info->serial_signals |= SerialSignal_DCD; | |
3826 | if (read_reg(info, CHB + STAR) & BIT1) | |
3827 | info->serial_signals |= SerialSignal_CTS; | |
3828 | ||
3829 | status = read_reg(info, CHA + PVR); | |
3830 | if (!(status & PVR_RI)) | |
3831 | info->serial_signals |= SerialSignal_RI; | |
3832 | if (!(status & PVR_DSR)) | |
3833 | info->serial_signals |= SerialSignal_DSR; | |
3834 | } | |
3835 | ||
3836 | /* Set the state of DTR and RTS based on contents of | |
3837 | * serial_signals member of device extension. | |
3838 | */ | |
cdaad343 | 3839 | static void set_signals(MGSLPC_INFO *info) |
1da177e4 LT |
3840 | { |
3841 | unsigned char val; | |
3842 | ||
3843 | val = read_reg(info, CHA + MODE); | |
3844 | if (info->params.mode == MGSL_MODE_ASYNC) { | |
3845 | if (info->serial_signals & SerialSignal_RTS) | |
3846 | val &= ~BIT6; | |
3847 | else | |
3848 | val |= BIT6; | |
3849 | } else { | |
3850 | if (info->serial_signals & SerialSignal_RTS) | |
3851 | val |= BIT2; | |
3852 | else | |
3853 | val &= ~BIT2; | |
3854 | } | |
3855 | write_reg(info, CHA + MODE, val); | |
3856 | ||
3857 | if (info->serial_signals & SerialSignal_DTR) | |
3858 | clear_reg_bits(info, CHA + PVR, PVR_DTR); | |
3859 | else | |
3860 | set_reg_bits(info, CHA + PVR, PVR_DTR); | |
3861 | } | |
3862 | ||
cdaad343 | 3863 | static void rx_reset_buffers(MGSLPC_INFO *info) |
1da177e4 LT |
3864 | { |
3865 | RXBUF *buf; | |
3866 | int i; | |
3867 | ||
3868 | info->rx_put = 0; | |
3869 | info->rx_get = 0; | |
3870 | info->rx_frame_count = 0; | |
3871 | for (i=0 ; i < info->rx_buf_count ; i++) { | |
3872 | buf = (RXBUF*)(info->rx_buf + (i * info->rx_buf_size)); | |
3873 | buf->status = buf->count = 0; | |
3874 | } | |
3875 | } | |
3876 | ||
3877 | /* Attempt to return a received HDLC frame | |
3878 | * Only frames received without errors are returned. | |
3879 | * | |
3880 | * Returns 1 if frame returned, otherwise 0 | |
3881 | */ | |
cdaad343 | 3882 | static int rx_get_frame(MGSLPC_INFO *info) |
1da177e4 LT |
3883 | { |
3884 | unsigned short status; | |
3885 | RXBUF *buf; | |
3886 | unsigned int framesize = 0; | |
3887 | unsigned long flags; | |
3888 | struct tty_struct *tty = info->tty; | |
3889 | int return_frame = 0; | |
3890 | ||
3891 | if (info->rx_frame_count == 0) | |
3892 | return 0; | |
3893 | ||
3894 | buf = (RXBUF*)(info->rx_buf + (info->rx_get * info->rx_buf_size)); | |
3895 | ||
3896 | status = buf->status; | |
3897 | ||
3898 | /* 07 VFR 1=valid frame | |
3899 | * 06 RDO 1=data overrun | |
3900 | * 05 CRC 1=OK, 0=error | |
3901 | * 04 RAB 1=frame aborted | |
3902 | */ | |
3903 | if ((status & 0xf0) != 0xA0) { | |
3904 | if (!(status & BIT7) || (status & BIT4)) | |
3905 | info->icount.rxabort++; | |
3906 | else if (status & BIT6) | |
3907 | info->icount.rxover++; | |
3908 | else if (!(status & BIT5)) { | |
3909 | info->icount.rxcrc++; | |
3910 | if (info->params.crc_type & HDLC_CRC_RETURN_EX) | |
3911 | return_frame = 1; | |
3912 | } | |
3913 | framesize = 0; | |
3914 | #ifdef CONFIG_HDLC | |
3915 | { | |
3916 | struct net_device_stats *stats = hdlc_stats(info->netdev); | |
3917 | stats->rx_errors++; | |
3918 | stats->rx_frame_errors++; | |
3919 | } | |
3920 | #endif | |
3921 | } else | |
3922 | return_frame = 1; | |
3923 | ||
3924 | if (return_frame) | |
3925 | framesize = buf->count; | |
3926 | ||
3927 | if (debug_level >= DEBUG_LEVEL_BH) | |
3928 | printk("%s(%d):rx_get_frame(%s) status=%04X size=%d\n", | |
3929 | __FILE__,__LINE__,info->device_name,status,framesize); | |
3930 | ||
3931 | if (debug_level >= DEBUG_LEVEL_DATA) | |
3932 | trace_block(info, buf->data, framesize, 0); | |
3933 | ||
3934 | if (framesize) { | |
3935 | if ((info->params.crc_type & HDLC_CRC_RETURN_EX && | |
3936 | framesize+1 > info->max_frame_size) || | |
3937 | framesize > info->max_frame_size) | |
3938 | info->icount.rxlong++; | |
3939 | else { | |
3940 | if (status & BIT5) | |
3941 | info->icount.rxok++; | |
3942 | ||
3943 | if (info->params.crc_type & HDLC_CRC_RETURN_EX) { | |
3944 | *(buf->data + framesize) = status & BIT5 ? RX_OK:RX_CRC_ERROR; | |
3945 | ++framesize; | |
3946 | } | |
3947 | ||
3948 | #ifdef CONFIG_HDLC | |
3949 | if (info->netcount) | |
3950 | hdlcdev_rx(info, buf->data, framesize); | |
3951 | else | |
3952 | #endif | |
3953 | ldisc_receive_buf(tty, buf->data, info->flag_buf, framesize); | |
3954 | } | |
3955 | } | |
3956 | ||
3957 | spin_lock_irqsave(&info->lock,flags); | |
3958 | buf->status = buf->count = 0; | |
3959 | info->rx_frame_count--; | |
3960 | info->rx_get++; | |
3961 | if (info->rx_get >= info->rx_buf_count) | |
3962 | info->rx_get = 0; | |
3963 | spin_unlock_irqrestore(&info->lock,flags); | |
3964 | ||
3965 | return 1; | |
3966 | } | |
3967 | ||
cdaad343 | 3968 | static BOOLEAN register_test(MGSLPC_INFO *info) |
1da177e4 LT |
3969 | { |
3970 | static unsigned char patterns[] = | |
3971 | { 0x00, 0xff, 0xaa, 0x55, 0x69, 0x96, 0x0f }; | |
fe971071 | 3972 | static unsigned int count = ARRAY_SIZE(patterns); |
1da177e4 LT |
3973 | unsigned int i; |
3974 | BOOLEAN rc = TRUE; | |
3975 | unsigned long flags; | |
3976 | ||
3977 | spin_lock_irqsave(&info->lock,flags); | |
3978 | reset_device(info); | |
3979 | ||
3980 | for (i = 0; i < count; i++) { | |
3981 | write_reg(info, XAD1, patterns[i]); | |
3982 | write_reg(info, XAD2, patterns[(i + 1) % count]); | |
fe971071 | 3983 | if ((read_reg(info, XAD1) != patterns[i]) || |
1da177e4 LT |
3984 | (read_reg(info, XAD2) != patterns[(i + 1) % count])) { |
3985 | rc = FALSE; | |
3986 | break; | |
3987 | } | |
3988 | } | |
3989 | ||
3990 | spin_unlock_irqrestore(&info->lock,flags); | |
3991 | return rc; | |
3992 | } | |
3993 | ||
cdaad343 | 3994 | static BOOLEAN irq_test(MGSLPC_INFO *info) |
1da177e4 LT |
3995 | { |
3996 | unsigned long end_time; | |
3997 | unsigned long flags; | |
3998 | ||
3999 | spin_lock_irqsave(&info->lock,flags); | |
4000 | reset_device(info); | |
4001 | ||
4002 | info->testing_irq = TRUE; | |
4003 | hdlc_mode(info); | |
4004 | ||
4005 | info->irq_occurred = FALSE; | |
4006 | ||
4007 | /* init hdlc mode */ | |
4008 | ||
4009 | irq_enable(info, CHA, IRQ_TIMER); | |
4010 | write_reg(info, CHA + TIMR, 0); /* 512 cycles */ | |
4011 | issue_command(info, CHA, CMD_START_TIMER); | |
4012 | ||
4013 | spin_unlock_irqrestore(&info->lock,flags); | |
4014 | ||
4015 | end_time=100; | |
4016 | while(end_time-- && !info->irq_occurred) { | |
4017 | msleep_interruptible(10); | |
4018 | } | |
4019 | ||
4020 | info->testing_irq = FALSE; | |
4021 | ||
4022 | spin_lock_irqsave(&info->lock,flags); | |
4023 | reset_device(info); | |
4024 | spin_unlock_irqrestore(&info->lock,flags); | |
4025 | ||
4026 | return info->irq_occurred ? TRUE : FALSE; | |
4027 | } | |
4028 | ||
cdaad343 | 4029 | static int adapter_test(MGSLPC_INFO *info) |
1da177e4 LT |
4030 | { |
4031 | if (!register_test(info)) { | |
4032 | info->init_error = DiagStatus_AddressFailure; | |
4033 | printk( "%s(%d):Register test failure for device %s Addr=%04X\n", | |
4034 | __FILE__,__LINE__,info->device_name, (unsigned short)(info->io_base) ); | |
4035 | return -ENODEV; | |
4036 | } | |
4037 | ||
4038 | if (!irq_test(info)) { | |
4039 | info->init_error = DiagStatus_IrqFailure; | |
4040 | printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n", | |
4041 | __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) ); | |
4042 | return -ENODEV; | |
4043 | } | |
4044 | ||
4045 | if (debug_level >= DEBUG_LEVEL_INFO) | |
4046 | printk("%s(%d):device %s passed diagnostics\n", | |
4047 | __FILE__,__LINE__,info->device_name); | |
4048 | return 0; | |
4049 | } | |
4050 | ||
cdaad343 | 4051 | static void trace_block(MGSLPC_INFO *info,const char* data, int count, int xmit) |
1da177e4 LT |
4052 | { |
4053 | int i; | |
4054 | int linecount; | |
4055 | if (xmit) | |
4056 | printk("%s tx data:\n",info->device_name); | |
4057 | else | |
4058 | printk("%s rx data:\n",info->device_name); | |
4059 | ||
4060 | while(count) { | |
4061 | if (count > 16) | |
4062 | linecount = 16; | |
4063 | else | |
4064 | linecount = count; | |
4065 | ||
4066 | for(i=0;i<linecount;i++) | |
4067 | printk("%02X ",(unsigned char)data[i]); | |
4068 | for(;i<17;i++) | |
4069 | printk(" "); | |
4070 | for(i=0;i<linecount;i++) { | |
4071 | if (data[i]>=040 && data[i]<=0176) | |
4072 | printk("%c",data[i]); | |
4073 | else | |
4074 | printk("."); | |
4075 | } | |
4076 | printk("\n"); | |
4077 | ||
4078 | data += linecount; | |
4079 | count -= linecount; | |
4080 | } | |
4081 | } | |
4082 | ||
4083 | /* HDLC frame time out | |
4084 | * update stats and do tx completion processing | |
4085 | */ | |
cdaad343 | 4086 | static void tx_timeout(unsigned long context) |
1da177e4 LT |
4087 | { |
4088 | MGSLPC_INFO *info = (MGSLPC_INFO*)context; | |
4089 | unsigned long flags; | |
4090 | ||
4091 | if ( debug_level >= DEBUG_LEVEL_INFO ) | |
4092 | printk( "%s(%d):tx_timeout(%s)\n", | |
4093 | __FILE__,__LINE__,info->device_name); | |
4094 | if(info->tx_active && | |
4095 | info->params.mode == MGSL_MODE_HDLC) { | |
4096 | info->icount.txtimeout++; | |
4097 | } | |
4098 | spin_lock_irqsave(&info->lock,flags); | |
4099 | info->tx_active = 0; | |
4100 | info->tx_count = info->tx_put = info->tx_get = 0; | |
4101 | ||
4102 | spin_unlock_irqrestore(&info->lock,flags); | |
4103 | ||
4104 | #ifdef CONFIG_HDLC | |
4105 | if (info->netcount) | |
4106 | hdlcdev_tx_done(info); | |
4107 | else | |
4108 | #endif | |
4109 | bh_transmit(info); | |
4110 | } | |
4111 | ||
4112 | #ifdef CONFIG_HDLC | |
4113 | ||
4114 | /** | |
4115 | * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.) | |
4116 | * set encoding and frame check sequence (FCS) options | |
4117 | * | |
4118 | * dev pointer to network device structure | |
4119 | * encoding serial encoding setting | |
4120 | * parity FCS setting | |
4121 | * | |
4122 | * returns 0 if success, otherwise error code | |
4123 | */ | |
4124 | static int hdlcdev_attach(struct net_device *dev, unsigned short encoding, | |
4125 | unsigned short parity) | |
4126 | { | |
4127 | MGSLPC_INFO *info = dev_to_port(dev); | |
4128 | unsigned char new_encoding; | |
4129 | unsigned short new_crctype; | |
4130 | ||
4131 | /* return error if TTY interface open */ | |
4132 | if (info->count) | |
4133 | return -EBUSY; | |
4134 | ||
4135 | switch (encoding) | |
4136 | { | |
4137 | case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break; | |
4138 | case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break; | |
4139 | case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break; | |
4140 | case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break; | |
4141 | case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break; | |
4142 | default: return -EINVAL; | |
4143 | } | |
4144 | ||
4145 | switch (parity) | |
4146 | { | |
4147 | case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break; | |
4148 | case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break; | |
4149 | case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break; | |
4150 | default: return -EINVAL; | |
4151 | } | |
4152 | ||
4153 | info->params.encoding = new_encoding; | |
53b3531b | 4154 | info->params.crc_type = new_crctype; |
1da177e4 LT |
4155 | |
4156 | /* if network interface up, reprogram hardware */ | |
4157 | if (info->netcount) | |
4158 | mgslpc_program_hw(info); | |
4159 | ||
4160 | return 0; | |
4161 | } | |
4162 | ||
4163 | /** | |
4164 | * called by generic HDLC layer to send frame | |
4165 | * | |
4166 | * skb socket buffer containing HDLC frame | |
4167 | * dev pointer to network device structure | |
4168 | * | |
4169 | * returns 0 if success, otherwise error code | |
4170 | */ | |
4171 | static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev) | |
4172 | { | |
4173 | MGSLPC_INFO *info = dev_to_port(dev); | |
4174 | struct net_device_stats *stats = hdlc_stats(dev); | |
4175 | unsigned long flags; | |
4176 | ||
4177 | if (debug_level >= DEBUG_LEVEL_INFO) | |
4178 | printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name); | |
4179 | ||
4180 | /* stop sending until this frame completes */ | |
4181 | netif_stop_queue(dev); | |
4182 | ||
4183 | /* copy data to device buffers */ | |
4184 | memcpy(info->tx_buf, skb->data, skb->len); | |
4185 | info->tx_get = 0; | |
4186 | info->tx_put = info->tx_count = skb->len; | |
4187 | ||
4188 | /* update network statistics */ | |
4189 | stats->tx_packets++; | |
4190 | stats->tx_bytes += skb->len; | |
4191 | ||
4192 | /* done with socket buffer, so free it */ | |
4193 | dev_kfree_skb(skb); | |
4194 | ||
4195 | /* save start time for transmit timeout detection */ | |
4196 | dev->trans_start = jiffies; | |
4197 | ||
4198 | /* start hardware transmitter if necessary */ | |
4199 | spin_lock_irqsave(&info->lock,flags); | |
4200 | if (!info->tx_active) | |
4201 | tx_start(info); | |
4202 | spin_unlock_irqrestore(&info->lock,flags); | |
4203 | ||
4204 | return 0; | |
4205 | } | |
4206 | ||
4207 | /** | |
4208 | * called by network layer when interface enabled | |
4209 | * claim resources and initialize hardware | |
4210 | * | |
4211 | * dev pointer to network device structure | |
4212 | * | |
4213 | * returns 0 if success, otherwise error code | |
4214 | */ | |
4215 | static int hdlcdev_open(struct net_device *dev) | |
4216 | { | |
4217 | MGSLPC_INFO *info = dev_to_port(dev); | |
4218 | int rc; | |
4219 | unsigned long flags; | |
4220 | ||
4221 | if (debug_level >= DEBUG_LEVEL_INFO) | |
4222 | printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name); | |
4223 | ||
4224 | /* generic HDLC layer open processing */ | |
4225 | if ((rc = hdlc_open(dev))) | |
4226 | return rc; | |
4227 | ||
4228 | /* arbitrate between network and tty opens */ | |
4229 | spin_lock_irqsave(&info->netlock, flags); | |
4230 | if (info->count != 0 || info->netcount != 0) { | |
4231 | printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name); | |
4232 | spin_unlock_irqrestore(&info->netlock, flags); | |
4233 | return -EBUSY; | |
4234 | } | |
4235 | info->netcount=1; | |
4236 | spin_unlock_irqrestore(&info->netlock, flags); | |
4237 | ||
4238 | /* claim resources and init adapter */ | |
4239 | if ((rc = startup(info)) != 0) { | |
4240 | spin_lock_irqsave(&info->netlock, flags); | |
4241 | info->netcount=0; | |
4242 | spin_unlock_irqrestore(&info->netlock, flags); | |
4243 | return rc; | |
4244 | } | |
4245 | ||
4246 | /* assert DTR and RTS, apply hardware settings */ | |
4247 | info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; | |
4248 | mgslpc_program_hw(info); | |
4249 | ||
4250 | /* enable network layer transmit */ | |
4251 | dev->trans_start = jiffies; | |
4252 | netif_start_queue(dev); | |
4253 | ||
4254 | /* inform generic HDLC layer of current DCD status */ | |
4255 | spin_lock_irqsave(&info->lock, flags); | |
4256 | get_signals(info); | |
4257 | spin_unlock_irqrestore(&info->lock, flags); | |
fbeff3c1 KH |
4258 | if (info->serial_signals & SerialSignal_DCD) |
4259 | netif_carrier_on(dev); | |
4260 | else | |
4261 | netif_carrier_off(dev); | |
1da177e4 LT |
4262 | return 0; |
4263 | } | |
4264 | ||
4265 | /** | |
4266 | * called by network layer when interface is disabled | |
4267 | * shutdown hardware and release resources | |
4268 | * | |
4269 | * dev pointer to network device structure | |
4270 | * | |
4271 | * returns 0 if success, otherwise error code | |
4272 | */ | |
4273 | static int hdlcdev_close(struct net_device *dev) | |
4274 | { | |
4275 | MGSLPC_INFO *info = dev_to_port(dev); | |
4276 | unsigned long flags; | |
4277 | ||
4278 | if (debug_level >= DEBUG_LEVEL_INFO) | |
4279 | printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name); | |
4280 | ||
4281 | netif_stop_queue(dev); | |
4282 | ||
4283 | /* shutdown adapter and release resources */ | |
4284 | shutdown(info); | |
4285 | ||
4286 | hdlc_close(dev); | |
4287 | ||
4288 | spin_lock_irqsave(&info->netlock, flags); | |
4289 | info->netcount=0; | |
4290 | spin_unlock_irqrestore(&info->netlock, flags); | |
4291 | ||
4292 | return 0; | |
4293 | } | |
4294 | ||
4295 | /** | |
4296 | * called by network layer to process IOCTL call to network device | |
4297 | * | |
4298 | * dev pointer to network device structure | |
4299 | * ifr pointer to network interface request structure | |
4300 | * cmd IOCTL command code | |
4301 | * | |
4302 | * returns 0 if success, otherwise error code | |
4303 | */ | |
4304 | static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) | |
4305 | { | |
4306 | const size_t size = sizeof(sync_serial_settings); | |
4307 | sync_serial_settings new_line; | |
4308 | sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync; | |
4309 | MGSLPC_INFO *info = dev_to_port(dev); | |
4310 | unsigned int flags; | |
4311 | ||
4312 | if (debug_level >= DEBUG_LEVEL_INFO) | |
4313 | printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name); | |
4314 | ||
4315 | /* return error if TTY interface open */ | |
4316 | if (info->count) | |
4317 | return -EBUSY; | |
4318 | ||
4319 | if (cmd != SIOCWANDEV) | |
4320 | return hdlc_ioctl(dev, ifr, cmd); | |
4321 | ||
4322 | switch(ifr->ifr_settings.type) { | |
4323 | case IF_GET_IFACE: /* return current sync_serial_settings */ | |
4324 | ||
4325 | ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL; | |
4326 | if (ifr->ifr_settings.size < size) { | |
4327 | ifr->ifr_settings.size = size; /* data size wanted */ | |
4328 | return -ENOBUFS; | |
4329 | } | |
4330 | ||
4331 | flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | | |
4332 | HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | | |
4333 | HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | | |
4334 | HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); | |
4335 | ||
4336 | switch (flags){ | |
4337 | case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break; | |
4338 | case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break; | |
4339 | case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break; | |
4340 | case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break; | |
4341 | default: new_line.clock_type = CLOCK_DEFAULT; | |
4342 | } | |
4343 | ||
4344 | new_line.clock_rate = info->params.clock_speed; | |
4345 | new_line.loopback = info->params.loopback ? 1:0; | |
4346 | ||
4347 | if (copy_to_user(line, &new_line, size)) | |
4348 | return -EFAULT; | |
4349 | return 0; | |
4350 | ||
4351 | case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */ | |
4352 | ||
4353 | if(!capable(CAP_NET_ADMIN)) | |
4354 | return -EPERM; | |
4355 | if (copy_from_user(&new_line, line, size)) | |
4356 | return -EFAULT; | |
4357 | ||
4358 | switch (new_line.clock_type) | |
4359 | { | |
4360 | case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break; | |
4361 | case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break; | |
4362 | case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break; | |
4363 | case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break; | |
4364 | case CLOCK_DEFAULT: flags = info->params.flags & | |
4365 | (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | | |
4366 | HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | | |
4367 | HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | | |
4368 | HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break; | |
4369 | default: return -EINVAL; | |
4370 | } | |
4371 | ||
4372 | if (new_line.loopback != 0 && new_line.loopback != 1) | |
4373 | return -EINVAL; | |
4374 | ||
4375 | info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | | |
4376 | HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | | |
4377 | HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | | |
4378 | HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); | |
4379 | info->params.flags |= flags; | |
4380 | ||
4381 | info->params.loopback = new_line.loopback; | |
4382 | ||
4383 | if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG)) | |
4384 | info->params.clock_speed = new_line.clock_rate; | |
4385 | else | |
4386 | info->params.clock_speed = 0; | |
4387 | ||
4388 | /* if network interface up, reprogram hardware */ | |
4389 | if (info->netcount) | |
4390 | mgslpc_program_hw(info); | |
4391 | return 0; | |
4392 | ||
4393 | default: | |
4394 | return hdlc_ioctl(dev, ifr, cmd); | |
4395 | } | |
4396 | } | |
4397 | ||
4398 | /** | |
4399 | * called by network layer when transmit timeout is detected | |
4400 | * | |
4401 | * dev pointer to network device structure | |
4402 | */ | |
4403 | static void hdlcdev_tx_timeout(struct net_device *dev) | |
4404 | { | |
4405 | MGSLPC_INFO *info = dev_to_port(dev); | |
4406 | struct net_device_stats *stats = hdlc_stats(dev); | |
4407 | unsigned long flags; | |
4408 | ||
4409 | if (debug_level >= DEBUG_LEVEL_INFO) | |
4410 | printk("hdlcdev_tx_timeout(%s)\n",dev->name); | |
4411 | ||
4412 | stats->tx_errors++; | |
4413 | stats->tx_aborted_errors++; | |
4414 | ||
4415 | spin_lock_irqsave(&info->lock,flags); | |
4416 | tx_stop(info); | |
4417 | spin_unlock_irqrestore(&info->lock,flags); | |
4418 | ||
4419 | netif_wake_queue(dev); | |
4420 | } | |
4421 | ||
4422 | /** | |
4423 | * called by device driver when transmit completes | |
4424 | * reenable network layer transmit if stopped | |
4425 | * | |
4426 | * info pointer to device instance information | |
4427 | */ | |
4428 | static void hdlcdev_tx_done(MGSLPC_INFO *info) | |
4429 | { | |
4430 | if (netif_queue_stopped(info->netdev)) | |
4431 | netif_wake_queue(info->netdev); | |
4432 | } | |
4433 | ||
4434 | /** | |
4435 | * called by device driver when frame received | |
4436 | * pass frame to network layer | |
4437 | * | |
4438 | * info pointer to device instance information | |
4439 | * buf pointer to buffer contianing frame data | |
4440 | * size count of data bytes in buf | |
4441 | */ | |
4442 | static void hdlcdev_rx(MGSLPC_INFO *info, char *buf, int size) | |
4443 | { | |
4444 | struct sk_buff *skb = dev_alloc_skb(size); | |
4445 | struct net_device *dev = info->netdev; | |
4446 | struct net_device_stats *stats = hdlc_stats(dev); | |
4447 | ||
4448 | if (debug_level >= DEBUG_LEVEL_INFO) | |
4449 | printk("hdlcdev_rx(%s)\n",dev->name); | |
4450 | ||
4451 | if (skb == NULL) { | |
4452 | printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", dev->name); | |
4453 | stats->rx_dropped++; | |
4454 | return; | |
4455 | } | |
4456 | ||
4457 | memcpy(skb_put(skb, size),buf,size); | |
4458 | ||
4459 | skb->protocol = hdlc_type_trans(skb, info->netdev); | |
4460 | ||
4461 | stats->rx_packets++; | |
4462 | stats->rx_bytes += size; | |
4463 | ||
4464 | netif_rx(skb); | |
4465 | ||
4466 | info->netdev->last_rx = jiffies; | |
4467 | } | |
4468 | ||
4469 | /** | |
4470 | * called by device driver when adding device instance | |
4471 | * do generic HDLC initialization | |
4472 | * | |
4473 | * info pointer to device instance information | |
4474 | * | |
4475 | * returns 0 if success, otherwise error code | |
4476 | */ | |
4477 | static int hdlcdev_init(MGSLPC_INFO *info) | |
4478 | { | |
4479 | int rc; | |
4480 | struct net_device *dev; | |
4481 | hdlc_device *hdlc; | |
4482 | ||
4483 | /* allocate and initialize network and HDLC layer objects */ | |
4484 | ||
4485 | if (!(dev = alloc_hdlcdev(info))) { | |
4486 | printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__); | |
4487 | return -ENOMEM; | |
4488 | } | |
4489 | ||
4490 | /* for network layer reporting purposes only */ | |
4491 | dev->base_addr = info->io_base; | |
4492 | dev->irq = info->irq_level; | |
4493 | ||
4494 | /* network layer callbacks and settings */ | |
4495 | dev->do_ioctl = hdlcdev_ioctl; | |
4496 | dev->open = hdlcdev_open; | |
4497 | dev->stop = hdlcdev_close; | |
4498 | dev->tx_timeout = hdlcdev_tx_timeout; | |
4499 | dev->watchdog_timeo = 10*HZ; | |
4500 | dev->tx_queue_len = 50; | |
4501 | ||
4502 | /* generic HDLC layer callbacks and settings */ | |
4503 | hdlc = dev_to_hdlc(dev); | |
4504 | hdlc->attach = hdlcdev_attach; | |
4505 | hdlc->xmit = hdlcdev_xmit; | |
4506 | ||
4507 | /* register objects with HDLC layer */ | |
4508 | if ((rc = register_hdlc_device(dev))) { | |
4509 | printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__); | |
4510 | free_netdev(dev); | |
4511 | return rc; | |
4512 | } | |
4513 | ||
4514 | info->netdev = dev; | |
4515 | return 0; | |
4516 | } | |
4517 | ||
4518 | /** | |
4519 | * called by device driver when removing device instance | |
4520 | * do generic HDLC cleanup | |
4521 | * | |
4522 | * info pointer to device instance information | |
4523 | */ | |
4524 | static void hdlcdev_exit(MGSLPC_INFO *info) | |
4525 | { | |
4526 | unregister_hdlc_device(info->netdev); | |
4527 | free_netdev(info->netdev); | |
4528 | info->netdev = NULL; | |
4529 | } | |
4530 | ||
4531 | #endif /* CONFIG_HDLC */ | |
4532 |