]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * specialix.c -- specialix IO8+ multiport serial driver. | |
3 | * | |
4 | * Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl) | |
5 | * Copyright (C) 1994-1996 Dmitry Gorodchanin (pgmdsg@ibi.com) | |
6 | * | |
7 | * Specialix pays for the development and support of this driver. | |
8 | * Please DO contact io8-linux@specialix.co.uk if you require | |
9 | * support. But please read the documentation (specialix.txt) | |
10 | * first. | |
11 | * | |
12 | * This driver was developped in the BitWizard linux device | |
13 | * driver service. If you require a linux device driver for your | |
14 | * product, please contact devices@BitWizard.nl for a quote. | |
15 | * | |
16 | * This code is firmly based on the riscom/8 serial driver, | |
17 | * written by Dmitry Gorodchanin. The specialix IO8+ card | |
18 | * programming information was obtained from the CL-CD1865 Data | |
19 | * Book, and Specialix document number 6200059: IO8+ Hardware | |
20 | * Functional Specification. | |
21 | * | |
22 | * This program is free software; you can redistribute it and/or | |
23 | * modify it under the terms of the GNU General Public License as | |
24 | * published by the Free Software Foundation; either version 2 of | |
25 | * the License, or (at your option) any later version. | |
26 | * | |
27 | * This program is distributed in the hope that it will be | |
28 | * useful, but WITHOUT ANY WARRANTY; without even the implied | |
29 | * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR | |
30 | * PURPOSE. See the GNU General Public License for more details. | |
31 | * | |
32 | * You should have received a copy of the GNU General Public | |
33 | * License along with this program; if not, write to the Free | |
34 | * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, | |
35 | * USA. | |
36 | * | |
37 | * Revision history: | |
38 | * | |
39 | * Revision 1.0: April 1st 1997. | |
40 | * Initial release for alpha testing. | |
d61780c0 JG |
41 | * Revision 1.1: April 14th 1997. |
42 | * Incorporated Richard Hudsons suggestions, | |
1da177e4 LT |
43 | * removed some debugging printk's. |
44 | * Revision 1.2: April 15th 1997. | |
45 | * Ported to 2.1.x kernels. | |
d61780c0 JG |
46 | * Revision 1.3: April 17th 1997 |
47 | * Backported to 2.0. (Compatibility macros). | |
1da177e4 | 48 | * Revision 1.4: April 18th 1997 |
d61780c0 JG |
49 | * Fixed DTR/RTS bug that caused the card to indicate |
50 | * "don't send data" to a modem after the password prompt. | |
1da177e4 LT |
51 | * Fixed bug for premature (fake) interrupts. |
52 | * Revision 1.5: April 19th 1997 | |
d61780c0 | 53 | * fixed a minor typo in the header file, cleanup a little. |
1da177e4 LT |
54 | * performance warnings are now MAXed at once per minute. |
55 | * Revision 1.6: May 23 1997 | |
56 | * Changed the specialix=... format to include interrupt. | |
57 | * Revision 1.7: May 27 1997 | |
58 | * Made many more debug printk's a compile time option. | |
59 | * Revision 1.8: Jul 1 1997 | |
60 | * port to linux-2.1.43 kernel. | |
61 | * Revision 1.9: Oct 9 1998 | |
62 | * Added stuff for the IO8+/PCI version. | |
d61780c0 JG |
63 | * Revision 1.10: Oct 22 1999 / Jan 21 2000. |
64 | * Added stuff for setserial. | |
1da177e4 | 65 | * Nicolas Mailhot (Nicolas.Mailhot@email.enst.fr) |
d61780c0 | 66 | * |
1da177e4 LT |
67 | */ |
68 | ||
69 | #define VERSION "1.11" | |
70 | ||
71 | ||
72 | /* | |
73 | * There is a bunch of documentation about the card, jumpers, config | |
74 | * settings, restrictions, cables, device names and numbers in | |
75 | * Documentation/specialix.txt | |
76 | */ | |
77 | ||
1da177e4 LT |
78 | #include <linux/module.h> |
79 | ||
80 | #include <asm/io.h> | |
81 | #include <linux/kernel.h> | |
82 | #include <linux/sched.h> | |
83 | #include <linux/ioport.h> | |
84 | #include <linux/interrupt.h> | |
85 | #include <linux/errno.h> | |
86 | #include <linux/tty.h> | |
33f0f88f | 87 | #include <linux/tty_flip.h> |
1da177e4 LT |
88 | #include <linux/mm.h> |
89 | #include <linux/serial.h> | |
90 | #include <linux/fcntl.h> | |
91 | #include <linux/major.h> | |
92 | #include <linux/delay.h> | |
1da177e4 LT |
93 | #include <linux/pci.h> |
94 | #include <linux/init.h> | |
95 | #include <asm/uaccess.h> | |
96 | ||
97 | #include "specialix_io8.h" | |
98 | #include "cd1865.h" | |
99 | ||
100 | ||
101 | /* | |
102 | This driver can spew a whole lot of debugging output at you. If you | |
103 | need maximum performance, you should disable the DEBUG define. To | |
104 | aid in debugging in the field, I'm leaving the compile-time debug | |
105 | features enabled, and disable them "runtime". That allows me to | |
106 | instruct people with problems to enable debugging without requiring | |
107 | them to recompile... | |
108 | */ | |
109 | #define DEBUG | |
110 | ||
111 | static int sx_debug; | |
112 | static int sx_rxfifo = SPECIALIX_RXFIFO; | |
113 | ||
114 | #ifdef DEBUG | |
115 | #define dprintk(f, str...) if (sx_debug & f) printk (str) | |
116 | #else | |
117 | #define dprintk(f, str...) /* nothing */ | |
118 | #endif | |
119 | ||
120 | #define SX_DEBUG_FLOW 0x0001 | |
121 | #define SX_DEBUG_DATA 0x0002 | |
122 | #define SX_DEBUG_PROBE 0x0004 | |
123 | #define SX_DEBUG_CHAN 0x0008 | |
124 | #define SX_DEBUG_INIT 0x0010 | |
125 | #define SX_DEBUG_RX 0x0020 | |
126 | #define SX_DEBUG_TX 0x0040 | |
127 | #define SX_DEBUG_IRQ 0x0080 | |
128 | #define SX_DEBUG_OPEN 0x0100 | |
129 | #define SX_DEBUG_TERMIOS 0x0200 | |
130 | #define SX_DEBUG_SIGNALS 0x0400 | |
131 | #define SX_DEBUG_FIFO 0x0800 | |
132 | ||
133 | ||
134 | #define func_enter() dprintk (SX_DEBUG_FLOW, "io8: enter %s\n",__FUNCTION__) | |
135 | #define func_exit() dprintk (SX_DEBUG_FLOW, "io8: exit %s\n", __FUNCTION__) | |
136 | ||
137 | #define jiffies_from_ms(a) ((((a) * HZ)/1000)+1) | |
138 | ||
139 | ||
140 | /* Configurable options: */ | |
141 | ||
142 | /* Am I paranoid or not ? ;-) */ | |
143 | #define SPECIALIX_PARANOIA_CHECK | |
144 | ||
145 | /* Do I trust the IRQ from the card? (enabeling it doesn't seem to help) | |
146 | When the IRQ routine leaves the chip in a state that is keeps on | |
147 | requiring attention, the timer doesn't help either. */ | |
148 | #undef SPECIALIX_TIMER | |
149 | ||
150 | #ifdef SPECIALIX_TIMER | |
151 | static int sx_poll = HZ; | |
152 | #endif | |
153 | ||
154 | ||
155 | ||
d61780c0 | 156 | /* |
1da177e4 LT |
157 | * The following defines are mostly for testing purposes. But if you need |
158 | * some nice reporting in your syslog, you can define them also. | |
159 | */ | |
160 | #undef SX_REPORT_FIFO | |
161 | #undef SX_REPORT_OVERRUN | |
162 | ||
163 | ||
164 | ||
165 | #ifdef CONFIG_SPECIALIX_RTSCTS | |
166 | #define SX_CRTSCTS(bla) 1 | |
167 | #else | |
168 | #define SX_CRTSCTS(tty) C_CRTSCTS(tty) | |
169 | #endif | |
170 | ||
171 | ||
172 | /* Used to be outb (0xff, 0x80); */ | |
173 | #define short_pause() udelay (1) | |
174 | ||
175 | ||
176 | #define SPECIALIX_LEGAL_FLAGS \ | |
177 | (ASYNC_HUP_NOTIFY | ASYNC_SAK | ASYNC_SPLIT_TERMIOS | \ | |
178 | ASYNC_SPD_HI | ASYNC_SPEED_VHI | ASYNC_SESSION_LOCKOUT | \ | |
179 | ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP) | |
180 | ||
181 | #undef RS_EVENT_WRITE_WAKEUP | |
182 | #define RS_EVENT_WRITE_WAKEUP 0 | |
183 | ||
184 | static struct tty_driver *specialix_driver; | |
1da177e4 | 185 | |
1da177e4 LT |
186 | static struct specialix_board sx_board[SX_NBOARD] = { |
187 | { 0, SX_IOBASE1, 9, }, | |
188 | { 0, SX_IOBASE2, 11, }, | |
189 | { 0, SX_IOBASE3, 12, }, | |
190 | { 0, SX_IOBASE4, 15, }, | |
191 | }; | |
192 | ||
193 | static struct specialix_port sx_port[SX_NBOARD * SX_NPORT]; | |
194 | ||
195 | ||
196 | #ifdef SPECIALIX_TIMER | |
197 | static struct timer_list missed_irq_timer; | |
7d12e780 | 198 | static irqreturn_t sx_interrupt(int irq, void * dev_id); |
1da177e4 LT |
199 | #endif |
200 | ||
201 | ||
202 | ||
203 | static inline int sx_paranoia_check(struct specialix_port const * port, | |
204 | char *name, const char *routine) | |
205 | { | |
206 | #ifdef SPECIALIX_PARANOIA_CHECK | |
207 | static const char *badmagic = | |
208 | KERN_ERR "sx: Warning: bad specialix port magic number for device %s in %s\n"; | |
209 | static const char *badinfo = | |
210 | KERN_ERR "sx: Warning: null specialix port for device %s in %s\n"; | |
d61780c0 | 211 | |
1da177e4 LT |
212 | if (!port) { |
213 | printk(badinfo, name, routine); | |
214 | return 1; | |
215 | } | |
216 | if (port->magic != SPECIALIX_MAGIC) { | |
217 | printk(badmagic, name, routine); | |
218 | return 1; | |
219 | } | |
220 | #endif | |
221 | return 0; | |
222 | } | |
223 | ||
224 | ||
225 | /* | |
d61780c0 | 226 | * |
1da177e4 | 227 | * Service functions for specialix IO8+ driver. |
d61780c0 | 228 | * |
1da177e4 LT |
229 | */ |
230 | ||
231 | /* Get board number from pointer */ | |
232 | static inline int board_No (struct specialix_board * bp) | |
233 | { | |
234 | return bp - sx_board; | |
235 | } | |
236 | ||
237 | ||
238 | /* Get port number from pointer */ | |
239 | static inline int port_No (struct specialix_port const * port) | |
240 | { | |
d61780c0 | 241 | return SX_PORT(port - sx_port); |
1da177e4 LT |
242 | } |
243 | ||
244 | ||
245 | /* Get pointer to board from pointer to port */ | |
246 | static inline struct specialix_board * port_Board(struct specialix_port const * port) | |
247 | { | |
248 | return &sx_board[SX_BOARD(port - sx_port)]; | |
249 | } | |
250 | ||
251 | ||
252 | /* Input Byte from CL CD186x register */ | |
253 | static inline unsigned char sx_in(struct specialix_board * bp, unsigned short reg) | |
254 | { | |
255 | bp->reg = reg | 0x80; | |
256 | outb (reg | 0x80, bp->base + SX_ADDR_REG); | |
257 | return inb (bp->base + SX_DATA_REG); | |
258 | } | |
259 | ||
260 | ||
261 | /* Output Byte to CL CD186x register */ | |
262 | static inline void sx_out(struct specialix_board * bp, unsigned short reg, | |
263 | unsigned char val) | |
264 | { | |
265 | bp->reg = reg | 0x80; | |
266 | outb (reg | 0x80, bp->base + SX_ADDR_REG); | |
267 | outb (val, bp->base + SX_DATA_REG); | |
268 | } | |
269 | ||
270 | ||
271 | /* Input Byte from CL CD186x register */ | |
272 | static inline unsigned char sx_in_off(struct specialix_board * bp, unsigned short reg) | |
273 | { | |
274 | bp->reg = reg; | |
275 | outb (reg, bp->base + SX_ADDR_REG); | |
276 | return inb (bp->base + SX_DATA_REG); | |
277 | } | |
278 | ||
279 | ||
280 | /* Output Byte to CL CD186x register */ | |
281 | static inline void sx_out_off(struct specialix_board * bp, unsigned short reg, | |
282 | unsigned char val) | |
283 | { | |
284 | bp->reg = reg; | |
285 | outb (reg, bp->base + SX_ADDR_REG); | |
286 | outb (val, bp->base + SX_DATA_REG); | |
287 | } | |
288 | ||
289 | ||
290 | /* Wait for Channel Command Register ready */ | |
291 | static inline void sx_wait_CCR(struct specialix_board * bp) | |
292 | { | |
293 | unsigned long delay, flags; | |
294 | unsigned char ccr; | |
295 | ||
296 | for (delay = SX_CCR_TIMEOUT; delay; delay--) { | |
297 | spin_lock_irqsave(&bp->lock, flags); | |
298 | ccr = sx_in(bp, CD186x_CCR); | |
299 | spin_unlock_irqrestore(&bp->lock, flags); | |
300 | if (!ccr) | |
301 | return; | |
302 | udelay (1); | |
303 | } | |
d61780c0 | 304 | |
1da177e4 LT |
305 | printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp)); |
306 | } | |
307 | ||
308 | ||
309 | /* Wait for Channel Command Register ready */ | |
310 | static inline void sx_wait_CCR_off(struct specialix_board * bp) | |
311 | { | |
312 | unsigned long delay; | |
313 | unsigned char crr; | |
314 | unsigned long flags; | |
315 | ||
316 | for (delay = SX_CCR_TIMEOUT; delay; delay--) { | |
317 | spin_lock_irqsave(&bp->lock, flags); | |
318 | crr = sx_in_off(bp, CD186x_CCR); | |
319 | spin_unlock_irqrestore(&bp->lock, flags); | |
320 | if (!crr) | |
321 | return; | |
322 | udelay (1); | |
323 | } | |
d61780c0 | 324 | |
1da177e4 LT |
325 | printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp)); |
326 | } | |
327 | ||
328 | ||
329 | /* | |
330 | * specialix IO8+ IO range functions. | |
331 | */ | |
332 | ||
d61780c0 | 333 | static inline int sx_request_io_range(struct specialix_board * bp) |
1da177e4 | 334 | { |
d61780c0 JG |
335 | return request_region(bp->base, |
336 | bp->flags & SX_BOARD_IS_PCI ? SX_PCI_IO_SPACE : SX_IO_SPACE, | |
337 | "specialix IO8+") == NULL; | |
1da177e4 LT |
338 | } |
339 | ||
340 | ||
341 | static inline void sx_release_io_range(struct specialix_board * bp) | |
342 | { | |
d61780c0 | 343 | release_region(bp->base, |
1da177e4 LT |
344 | bp->flags&SX_BOARD_IS_PCI?SX_PCI_IO_SPACE:SX_IO_SPACE); |
345 | } | |
346 | ||
d61780c0 | 347 | |
1da177e4 | 348 | /* Must be called with enabled interrupts */ |
d61780c0 | 349 | /* Ugly. Very ugly. Don't use this for anything else than initialization |
1da177e4 LT |
350 | code */ |
351 | static inline void sx_long_delay(unsigned long delay) | |
352 | { | |
353 | unsigned long i; | |
d61780c0 | 354 | |
1da177e4 LT |
355 | for (i = jiffies + delay; time_after(i, jiffies); ) ; |
356 | } | |
357 | ||
358 | ||
359 | ||
360 | /* Set the IRQ using the RTS lines that run to the PAL on the board.... */ | |
361 | static int sx_set_irq ( struct specialix_board *bp) | |
362 | { | |
363 | int virq; | |
364 | int i; | |
365 | unsigned long flags; | |
366 | ||
d61780c0 | 367 | if (bp->flags & SX_BOARD_IS_PCI) |
1da177e4 LT |
368 | return 1; |
369 | switch (bp->irq) { | |
370 | /* In the same order as in the docs... */ | |
371 | case 15: virq = 0;break; | |
372 | case 12: virq = 1;break; | |
373 | case 11: virq = 2;break; | |
374 | case 9: virq = 3;break; | |
375 | default: printk (KERN_ERR "Speclialix: cannot set irq to %d.\n", bp->irq); | |
376 | return 0; | |
377 | } | |
378 | spin_lock_irqsave(&bp->lock, flags); | |
379 | for (i=0;i<2;i++) { | |
380 | sx_out(bp, CD186x_CAR, i); | |
381 | sx_out(bp, CD186x_MSVRTS, ((virq >> i) & 0x1)? MSVR_RTS:0); | |
382 | } | |
383 | spin_unlock_irqrestore(&bp->lock, flags); | |
384 | return 1; | |
385 | } | |
386 | ||
387 | ||
388 | /* Reset and setup CD186x chip */ | |
389 | static int sx_init_CD186x(struct specialix_board * bp) | |
390 | { | |
391 | unsigned long flags; | |
392 | int scaler; | |
393 | int rv = 1; | |
394 | ||
395 | func_enter(); | |
396 | sx_wait_CCR_off(bp); /* Wait for CCR ready */ | |
397 | spin_lock_irqsave(&bp->lock, flags); | |
398 | sx_out_off(bp, CD186x_CCR, CCR_HARDRESET); /* Reset CD186x chip */ | |
399 | spin_unlock_irqrestore(&bp->lock, flags); | |
400 | sx_long_delay(HZ/20); /* Delay 0.05 sec */ | |
401 | spin_lock_irqsave(&bp->lock, flags); | |
402 | sx_out_off(bp, CD186x_GIVR, SX_ID); /* Set ID for this chip */ | |
403 | sx_out_off(bp, CD186x_GICR, 0); /* Clear all bits */ | |
404 | sx_out_off(bp, CD186x_PILR1, SX_ACK_MINT); /* Prio for modem intr */ | |
405 | sx_out_off(bp, CD186x_PILR2, SX_ACK_TINT); /* Prio for transmitter intr */ | |
406 | sx_out_off(bp, CD186x_PILR3, SX_ACK_RINT); /* Prio for receiver intr */ | |
407 | /* Set RegAckEn */ | |
408 | sx_out_off(bp, CD186x_SRCR, sx_in (bp, CD186x_SRCR) | SRCR_REGACKEN); | |
d61780c0 | 409 | |
1da177e4 LT |
410 | /* Setting up prescaler. We need 4 ticks per 1 ms */ |
411 | scaler = SX_OSCFREQ/SPECIALIX_TPS; | |
412 | ||
413 | sx_out_off(bp, CD186x_PPRH, scaler >> 8); | |
414 | sx_out_off(bp, CD186x_PPRL, scaler & 0xff); | |
415 | spin_unlock_irqrestore(&bp->lock, flags); | |
416 | ||
417 | if (!sx_set_irq (bp)) { | |
418 | /* Figure out how to pass this along... */ | |
419 | printk (KERN_ERR "Cannot set irq to %d.\n", bp->irq); | |
420 | rv = 0; | |
421 | } | |
422 | ||
423 | func_exit(); | |
424 | return rv; | |
425 | } | |
426 | ||
427 | ||
428 | static int read_cross_byte (struct specialix_board *bp, int reg, int bit) | |
429 | { | |
430 | int i; | |
431 | int t; | |
432 | unsigned long flags; | |
433 | ||
434 | spin_lock_irqsave(&bp->lock, flags); | |
435 | for (i=0, t=0;i<8;i++) { | |
436 | sx_out_off (bp, CD186x_CAR, i); | |
d61780c0 | 437 | if (sx_in_off (bp, reg) & bit) |
1da177e4 LT |
438 | t |= 1 << i; |
439 | } | |
440 | spin_unlock_irqrestore(&bp->lock, flags); | |
441 | ||
442 | return t; | |
443 | } | |
444 | ||
445 | ||
446 | #ifdef SPECIALIX_TIMER | |
447 | void missed_irq (unsigned long data) | |
448 | { | |
449 | unsigned char irq; | |
450 | unsigned long flags; | |
451 | struct specialix_board *bp = (struct specialix_board *)data; | |
452 | ||
453 | spin_lock_irqsave(&bp->lock, flags); | |
454 | irq = sx_in ((struct specialix_board *)data, CD186x_SRSR) & | |
455 | (SRSR_RREQint | | |
456 | SRSR_TREQint | | |
457 | SRSR_MREQint); | |
458 | spin_unlock_irqrestore(&bp->lock, flags); | |
459 | if (irq) { | |
460 | printk (KERN_INFO "Missed interrupt... Calling int from timer. \n"); | |
d61780c0 | 461 | sx_interrupt (((struct specialix_board *)data)->irq, |
d096f3e9 | 462 | (void*)data); |
1da177e4 | 463 | } |
40565f19 | 464 | mod_timer(&missed_irq_timer, jiffies + sx_poll); |
1da177e4 LT |
465 | } |
466 | #endif | |
467 | ||
468 | ||
469 | ||
470 | /* Main probing routine, also sets irq. */ | |
471 | static int sx_probe(struct specialix_board *bp) | |
472 | { | |
473 | unsigned char val1, val2; | |
474 | #if 0 | |
475 | int irqs = 0; | |
476 | int retries; | |
477 | #endif | |
478 | int rev; | |
479 | int chip; | |
480 | ||
481 | func_enter(); | |
482 | ||
d61780c0 | 483 | if (sx_request_io_range(bp)) { |
1da177e4 LT |
484 | func_exit(); |
485 | return 1; | |
486 | } | |
487 | ||
488 | /* Are the I/O ports here ? */ | |
489 | sx_out_off(bp, CD186x_PPRL, 0x5a); | |
490 | short_pause (); | |
491 | val1 = sx_in_off(bp, CD186x_PPRL); | |
492 | ||
493 | sx_out_off(bp, CD186x_PPRL, 0xa5); | |
494 | short_pause (); | |
495 | val2 = sx_in_off(bp, CD186x_PPRL); | |
496 | ||
d61780c0 | 497 | |
1da177e4 LT |
498 | if ((val1 != 0x5a) || (val2 != 0xa5)) { |
499 | printk(KERN_INFO "sx%d: specialix IO8+ Board at 0x%03x not found.\n", | |
500 | board_No(bp), bp->base); | |
d61780c0 | 501 | sx_release_io_range(bp); |
1da177e4 LT |
502 | func_exit(); |
503 | return 1; | |
504 | } | |
505 | ||
d61780c0 | 506 | /* Check the DSR lines that Specialix uses as board |
1da177e4 LT |
507 | identification */ |
508 | val1 = read_cross_byte (bp, CD186x_MSVR, MSVR_DSR); | |
509 | val2 = read_cross_byte (bp, CD186x_MSVR, MSVR_RTS); | |
510 | dprintk (SX_DEBUG_INIT, "sx%d: DSR lines are: %02x, rts lines are: %02x\n", | |
511 | board_No(bp), val1, val2); | |
512 | ||
513 | /* They managed to switch the bit order between the docs and | |
514 | the IO8+ card. The new PCI card now conforms to old docs. | |
515 | They changed the PCI docs to reflect the situation on the | |
516 | old card. */ | |
517 | val2 = (bp->flags & SX_BOARD_IS_PCI)?0x4d : 0xb2; | |
518 | if (val1 != val2) { | |
519 | printk(KERN_INFO "sx%d: specialix IO8+ ID %02x at 0x%03x not found (%02x).\n", | |
520 | board_No(bp), val2, bp->base, val1); | |
d61780c0 | 521 | sx_release_io_range(bp); |
1da177e4 LT |
522 | func_exit(); |
523 | return 1; | |
524 | } | |
525 | ||
526 | ||
527 | #if 0 | |
528 | /* It's time to find IRQ for this board */ | |
529 | for (retries = 0; retries < 5 && irqs <= 0; retries++) { | |
530 | irqs = probe_irq_on(); | |
531 | sx_init_CD186x(bp); /* Reset CD186x chip */ | |
532 | sx_out(bp, CD186x_CAR, 2); /* Select port 2 */ | |
533 | sx_wait_CCR(bp); | |
534 | sx_out(bp, CD186x_CCR, CCR_TXEN); /* Enable transmitter */ | |
535 | sx_out(bp, CD186x_IER, IER_TXRDY); /* Enable tx empty intr */ | |
d61780c0 | 536 | sx_long_delay(HZ/20); |
1da177e4 LT |
537 | irqs = probe_irq_off(irqs); |
538 | ||
539 | dprintk (SX_DEBUG_INIT, "SRSR = %02x, ", sx_in(bp, CD186x_SRSR)); | |
540 | dprintk (SX_DEBUG_INIT, "TRAR = %02x, ", sx_in(bp, CD186x_TRAR)); | |
541 | dprintk (SX_DEBUG_INIT, "GIVR = %02x, ", sx_in(bp, CD186x_GIVR)); | |
542 | dprintk (SX_DEBUG_INIT, "GICR = %02x, ", sx_in(bp, CD186x_GICR)); | |
543 | dprintk (SX_DEBUG_INIT, "\n"); | |
544 | ||
545 | /* Reset CD186x again */ | |
546 | if (!sx_init_CD186x(bp)) { | |
547 | /* Hmmm. This is dead code anyway. */ | |
548 | } | |
549 | ||
550 | dprintk (SX_DEBUG_INIT "val1 = %02x, val2 = %02x, val3 = %02x.\n", | |
d61780c0 JG |
551 | val1, val2, val3); |
552 | ||
1da177e4 | 553 | } |
d61780c0 | 554 | |
1da177e4 LT |
555 | #if 0 |
556 | if (irqs <= 0) { | |
557 | printk(KERN_ERR "sx%d: Can't find IRQ for specialix IO8+ board at 0x%03x.\n", | |
558 | board_No(bp), bp->base); | |
d61780c0 | 559 | sx_release_io_range(bp); |
1da177e4 LT |
560 | func_exit(); |
561 | return 1; | |
562 | } | |
563 | #endif | |
564 | printk (KERN_INFO "Started with irq=%d, but now have irq=%d.\n", bp->irq, irqs); | |
565 | if (irqs > 0) | |
566 | bp->irq = irqs; | |
567 | #endif | |
568 | /* Reset CD186x again */ | |
569 | if (!sx_init_CD186x(bp)) { | |
d61780c0 | 570 | sx_release_io_range(bp); |
1da177e4 | 571 | func_exit(); |
d61780c0 | 572 | return 1; |
1da177e4 LT |
573 | } |
574 | ||
575 | sx_request_io_range(bp); | |
576 | bp->flags |= SX_BOARD_PRESENT; | |
d61780c0 | 577 | |
1da177e4 LT |
578 | /* Chip revcode pkgtype |
579 | GFRCR SRCR bit 7 | |
580 | CD180 rev B 0x81 0 | |
581 | CD180 rev C 0x82 0 | |
582 | CD1864 rev A 0x82 1 | |
d61780c0 | 583 | CD1865 rev A 0x83 1 -- Do not use!!! Does not work. |
1da177e4 LT |
584 | CD1865 rev B 0x84 1 |
585 | -- Thanks to Gwen Wang, Cirrus Logic. | |
586 | */ | |
587 | ||
588 | switch (sx_in_off(bp, CD186x_GFRCR)) { | |
589 | case 0x82:chip = 1864;rev='A';break; | |
590 | case 0x83:chip = 1865;rev='A';break; | |
591 | case 0x84:chip = 1865;rev='B';break; | |
592 | case 0x85:chip = 1865;rev='C';break; /* Does not exist at this time */ | |
593 | default:chip=-1;rev='x'; | |
594 | } | |
595 | ||
596 | dprintk (SX_DEBUG_INIT, " GFCR = 0x%02x\n", sx_in_off(bp, CD186x_GFRCR) ); | |
597 | ||
598 | #ifdef SPECIALIX_TIMER | |
40565f19 JS |
599 | setup_timer(&missed_irq_timer, missed_irq, (unsigned long)bp); |
600 | mod_timer(&missed_irq_timer, jiffies + sx_poll); | |
1da177e4 LT |
601 | #endif |
602 | ||
603 | printk(KERN_INFO"sx%d: specialix IO8+ board detected at 0x%03x, IRQ %d, CD%d Rev. %c.\n", | |
604 | board_No(bp), | |
605 | bp->base, bp->irq, | |
606 | chip, rev); | |
607 | ||
608 | func_exit(); | |
609 | return 0; | |
610 | } | |
611 | ||
d61780c0 JG |
612 | /* |
613 | * | |
1da177e4 LT |
614 | * Interrupt processing routines. |
615 | * */ | |
616 | ||
617 | static inline void sx_mark_event(struct specialix_port * port, int event) | |
618 | { | |
619 | func_enter(); | |
620 | ||
621 | set_bit(event, &port->event); | |
622 | schedule_work(&port->tqueue); | |
623 | ||
624 | func_exit(); | |
625 | } | |
626 | ||
627 | ||
628 | static inline struct specialix_port * sx_get_port(struct specialix_board * bp, | |
629 | unsigned char const * what) | |
630 | { | |
631 | unsigned char channel; | |
632 | struct specialix_port * port = NULL; | |
633 | ||
634 | channel = sx_in(bp, CD186x_GICR) >> GICR_CHAN_OFF; | |
635 | dprintk (SX_DEBUG_CHAN, "channel: %d\n", channel); | |
636 | if (channel < CD186x_NCH) { | |
637 | port = &sx_port[board_No(bp) * SX_NPORT + channel]; | |
638 | dprintk (SX_DEBUG_CHAN, "port: %d %p flags: 0x%x\n",board_No(bp) * SX_NPORT + channel, port, port->flags & ASYNC_INITIALIZED); | |
639 | ||
640 | if (port->flags & ASYNC_INITIALIZED) { | |
641 | dprintk (SX_DEBUG_CHAN, "port: %d %p\n", channel, port); | |
642 | func_exit(); | |
643 | return port; | |
644 | } | |
645 | } | |
d61780c0 | 646 | printk(KERN_INFO "sx%d: %s interrupt from invalid port %d\n", |
1da177e4 LT |
647 | board_No(bp), what, channel); |
648 | return NULL; | |
649 | } | |
650 | ||
651 | ||
652 | static inline void sx_receive_exc(struct specialix_board * bp) | |
653 | { | |
654 | struct specialix_port *port; | |
655 | struct tty_struct *tty; | |
656 | unsigned char status; | |
33f0f88f | 657 | unsigned char ch, flag; |
1da177e4 LT |
658 | |
659 | func_enter(); | |
660 | ||
661 | port = sx_get_port(bp, "Receive"); | |
662 | if (!port) { | |
663 | dprintk (SX_DEBUG_RX, "Hmm, couldn't find port.\n"); | |
664 | func_exit(); | |
665 | return; | |
666 | } | |
667 | tty = port->tty; | |
d61780c0 | 668 | |
1da177e4 LT |
669 | status = sx_in(bp, CD186x_RCSR); |
670 | ||
671 | dprintk (SX_DEBUG_RX, "status: 0x%x\n", status); | |
672 | if (status & RCSR_OE) { | |
673 | port->overrun++; | |
674 | dprintk(SX_DEBUG_FIFO, "sx%d: port %d: Overrun. Total %ld overruns.\n", | |
675 | board_No(bp), port_No(port), port->overrun); | |
676 | } | |
677 | status &= port->mark_mask; | |
678 | ||
679 | /* This flip buffer check needs to be below the reading of the | |
680 | status register to reset the chip's IRQ.... */ | |
33f0f88f | 681 | if (tty_buffer_request_room(tty, 1) == 0) { |
1da177e4 LT |
682 | dprintk(SX_DEBUG_FIFO, "sx%d: port %d: Working around flip buffer overflow.\n", |
683 | board_No(bp), port_No(port)); | |
684 | func_exit(); | |
685 | return; | |
686 | } | |
687 | ||
688 | ch = sx_in(bp, CD186x_RDR); | |
689 | if (!status) { | |
690 | func_exit(); | |
691 | return; | |
692 | } | |
693 | if (status & RCSR_TOUT) { | |
d61780c0 | 694 | printk(KERN_INFO "sx%d: port %d: Receiver timeout. Hardware problems ?\n", |
1da177e4 LT |
695 | board_No(bp), port_No(port)); |
696 | func_exit(); | |
697 | return; | |
d61780c0 | 698 | |
1da177e4 LT |
699 | } else if (status & RCSR_BREAK) { |
700 | dprintk(SX_DEBUG_RX, "sx%d: port %d: Handling break...\n", | |
701 | board_No(bp), port_No(port)); | |
33f0f88f | 702 | flag = TTY_BREAK; |
1da177e4 LT |
703 | if (port->flags & ASYNC_SAK) |
704 | do_SAK(tty); | |
d61780c0 JG |
705 | |
706 | } else if (status & RCSR_PE) | |
33f0f88f | 707 | flag = TTY_PARITY; |
d61780c0 JG |
708 | |
709 | else if (status & RCSR_FE) | |
33f0f88f | 710 | flag = TTY_FRAME; |
d61780c0 | 711 | |
1da177e4 | 712 | else if (status & RCSR_OE) |
33f0f88f | 713 | flag = TTY_OVERRUN; |
d61780c0 | 714 | |
1da177e4 | 715 | else |
33f0f88f | 716 | flag = TTY_NORMAL; |
1da177e4 | 717 | |
33f0f88f AC |
718 | if(tty_insert_flip_char(tty, ch, flag)) |
719 | tty_flip_buffer_push(tty); | |
1da177e4 LT |
720 | func_exit(); |
721 | } | |
722 | ||
723 | ||
724 | static inline void sx_receive(struct specialix_board * bp) | |
725 | { | |
726 | struct specialix_port *port; | |
727 | struct tty_struct *tty; | |
728 | unsigned char count; | |
729 | ||
730 | func_enter(); | |
d61780c0 | 731 | |
1da177e4 LT |
732 | if (!(port = sx_get_port(bp, "Receive"))) { |
733 | dprintk (SX_DEBUG_RX, "Hmm, couldn't find port.\n"); | |
734 | func_exit(); | |
735 | return; | |
736 | } | |
737 | tty = port->tty; | |
d61780c0 | 738 | |
1da177e4 LT |
739 | count = sx_in(bp, CD186x_RDCR); |
740 | dprintk (SX_DEBUG_RX, "port: %p: count: %d\n", port, count); | |
741 | port->hits[count > 8 ? 9 : count]++; | |
d61780c0 | 742 | |
33f0f88f | 743 | tty_buffer_request_room(tty, count); |
1da177e4 | 744 | |
33f0f88f AC |
745 | while (count--) |
746 | tty_insert_flip_char(tty, sx_in(bp, CD186x_RDR), TTY_NORMAL); | |
747 | tty_flip_buffer_push(tty); | |
1da177e4 LT |
748 | func_exit(); |
749 | } | |
750 | ||
751 | ||
752 | static inline void sx_transmit(struct specialix_board * bp) | |
753 | { | |
754 | struct specialix_port *port; | |
755 | struct tty_struct *tty; | |
756 | unsigned char count; | |
757 | ||
758 | func_enter(); | |
759 | if (!(port = sx_get_port(bp, "Transmit"))) { | |
760 | func_exit(); | |
761 | return; | |
762 | } | |
763 | dprintk (SX_DEBUG_TX, "port: %p\n", port); | |
764 | tty = port->tty; | |
d61780c0 | 765 | |
1da177e4 LT |
766 | if (port->IER & IER_TXEMPTY) { |
767 | /* FIFO drained */ | |
768 | sx_out(bp, CD186x_CAR, port_No(port)); | |
769 | port->IER &= ~IER_TXEMPTY; | |
770 | sx_out(bp, CD186x_IER, port->IER); | |
771 | func_exit(); | |
772 | return; | |
773 | } | |
d61780c0 | 774 | |
1da177e4 LT |
775 | if ((port->xmit_cnt <= 0 && !port->break_length) |
776 | || tty->stopped || tty->hw_stopped) { | |
777 | sx_out(bp, CD186x_CAR, port_No(port)); | |
778 | port->IER &= ~IER_TXRDY; | |
779 | sx_out(bp, CD186x_IER, port->IER); | |
780 | func_exit(); | |
781 | return; | |
782 | } | |
d61780c0 | 783 | |
1da177e4 LT |
784 | if (port->break_length) { |
785 | if (port->break_length > 0) { | |
786 | if (port->COR2 & COR2_ETC) { | |
787 | sx_out(bp, CD186x_TDR, CD186x_C_ESC); | |
788 | sx_out(bp, CD186x_TDR, CD186x_C_SBRK); | |
789 | port->COR2 &= ~COR2_ETC; | |
790 | } | |
791 | count = min_t(int, port->break_length, 0xff); | |
792 | sx_out(bp, CD186x_TDR, CD186x_C_ESC); | |
793 | sx_out(bp, CD186x_TDR, CD186x_C_DELAY); | |
794 | sx_out(bp, CD186x_TDR, count); | |
795 | if (!(port->break_length -= count)) | |
796 | port->break_length--; | |
797 | } else { | |
798 | sx_out(bp, CD186x_TDR, CD186x_C_ESC); | |
799 | sx_out(bp, CD186x_TDR, CD186x_C_EBRK); | |
800 | sx_out(bp, CD186x_COR2, port->COR2); | |
801 | sx_wait_CCR(bp); | |
802 | sx_out(bp, CD186x_CCR, CCR_CORCHG2); | |
803 | port->break_length = 0; | |
804 | } | |
805 | ||
806 | func_exit(); | |
807 | return; | |
808 | } | |
d61780c0 | 809 | |
1da177e4 LT |
810 | count = CD186x_NFIFO; |
811 | do { | |
812 | sx_out(bp, CD186x_TDR, port->xmit_buf[port->xmit_tail++]); | |
813 | port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE-1); | |
814 | if (--port->xmit_cnt <= 0) | |
815 | break; | |
816 | } while (--count > 0); | |
d61780c0 | 817 | |
1da177e4 LT |
818 | if (port->xmit_cnt <= 0) { |
819 | sx_out(bp, CD186x_CAR, port_No(port)); | |
820 | port->IER &= ~IER_TXRDY; | |
821 | sx_out(bp, CD186x_IER, port->IER); | |
822 | } | |
823 | if (port->xmit_cnt <= port->wakeup_chars) | |
824 | sx_mark_event(port, RS_EVENT_WRITE_WAKEUP); | |
825 | ||
826 | func_exit(); | |
827 | } | |
828 | ||
829 | ||
830 | static inline void sx_check_modem(struct specialix_board * bp) | |
831 | { | |
832 | struct specialix_port *port; | |
833 | struct tty_struct *tty; | |
834 | unsigned char mcr; | |
835 | int msvr_cd; | |
836 | ||
837 | dprintk (SX_DEBUG_SIGNALS, "Modem intr. "); | |
838 | if (!(port = sx_get_port(bp, "Modem"))) | |
839 | return; | |
d61780c0 | 840 | |
1da177e4 | 841 | tty = port->tty; |
d61780c0 | 842 | |
1da177e4 LT |
843 | mcr = sx_in(bp, CD186x_MCR); |
844 | printk ("mcr = %02x.\n", mcr); | |
845 | ||
846 | if ((mcr & MCR_CDCHG)) { | |
847 | dprintk (SX_DEBUG_SIGNALS, "CD just changed... "); | |
848 | msvr_cd = sx_in(bp, CD186x_MSVR) & MSVR_CD; | |
849 | if (msvr_cd) { | |
850 | dprintk (SX_DEBUG_SIGNALS, "Waking up guys in open.\n"); | |
851 | wake_up_interruptible(&port->open_wait); | |
852 | } else { | |
853 | dprintk (SX_DEBUG_SIGNALS, "Sending HUP.\n"); | |
854 | schedule_work(&port->tqueue_hangup); | |
855 | } | |
856 | } | |
d61780c0 | 857 | |
1da177e4 LT |
858 | #ifdef SPECIALIX_BRAIN_DAMAGED_CTS |
859 | if (mcr & MCR_CTSCHG) { | |
860 | if (sx_in(bp, CD186x_MSVR) & MSVR_CTS) { | |
861 | tty->hw_stopped = 0; | |
862 | port->IER |= IER_TXRDY; | |
863 | if (port->xmit_cnt <= port->wakeup_chars) | |
864 | sx_mark_event(port, RS_EVENT_WRITE_WAKEUP); | |
865 | } else { | |
866 | tty->hw_stopped = 1; | |
867 | port->IER &= ~IER_TXRDY; | |
868 | } | |
869 | sx_out(bp, CD186x_IER, port->IER); | |
870 | } | |
871 | if (mcr & MCR_DSSXHG) { | |
872 | if (sx_in(bp, CD186x_MSVR) & MSVR_DSR) { | |
873 | tty->hw_stopped = 0; | |
874 | port->IER |= IER_TXRDY; | |
875 | if (port->xmit_cnt <= port->wakeup_chars) | |
876 | sx_mark_event(port, RS_EVENT_WRITE_WAKEUP); | |
877 | } else { | |
878 | tty->hw_stopped = 1; | |
879 | port->IER &= ~IER_TXRDY; | |
880 | } | |
881 | sx_out(bp, CD186x_IER, port->IER); | |
882 | } | |
883 | #endif /* SPECIALIX_BRAIN_DAMAGED_CTS */ | |
d61780c0 | 884 | |
1da177e4 LT |
885 | /* Clear change bits */ |
886 | sx_out(bp, CD186x_MCR, 0); | |
887 | } | |
888 | ||
889 | ||
890 | /* The main interrupt processing routine */ | |
7d12e780 | 891 | static irqreturn_t sx_interrupt(int irq, void *dev_id) |
1da177e4 LT |
892 | { |
893 | unsigned char status; | |
894 | unsigned char ack; | |
895 | struct specialix_board *bp; | |
896 | unsigned long loop = 0; | |
897 | int saved_reg; | |
898 | unsigned long flags; | |
899 | ||
900 | func_enter(); | |
901 | ||
902 | bp = dev_id; | |
903 | spin_lock_irqsave(&bp->lock, flags); | |
904 | ||
905 | dprintk (SX_DEBUG_FLOW, "enter %s port %d room: %ld\n", __FUNCTION__, port_No(sx_get_port(bp, "INT")), SERIAL_XMIT_SIZE - sx_get_port(bp, "ITN")->xmit_cnt - 1); | |
c7bec5ab | 906 | if (!(bp->flags & SX_BOARD_ACTIVE)) { |
1da177e4 LT |
907 | dprintk (SX_DEBUG_IRQ, "sx: False interrupt. irq %d.\n", irq); |
908 | spin_unlock_irqrestore(&bp->lock, flags); | |
909 | func_exit(); | |
910 | return IRQ_NONE; | |
911 | } | |
912 | ||
913 | saved_reg = bp->reg; | |
914 | ||
915 | while ((++loop < 16) && (status = (sx_in(bp, CD186x_SRSR) & | |
916 | (SRSR_RREQint | | |
917 | SRSR_TREQint | | |
d61780c0 | 918 | SRSR_MREQint)))) { |
1da177e4 LT |
919 | if (status & SRSR_RREQint) { |
920 | ack = sx_in(bp, CD186x_RRAR); | |
921 | ||
922 | if (ack == (SX_ID | GIVR_IT_RCV)) | |
923 | sx_receive(bp); | |
924 | else if (ack == (SX_ID | GIVR_IT_REXC)) | |
925 | sx_receive_exc(bp); | |
926 | else | |
927 | printk(KERN_ERR "sx%d: status: 0x%x Bad receive ack 0x%02x.\n", | |
928 | board_No(bp), status, ack); | |
d61780c0 | 929 | |
1da177e4 LT |
930 | } else if (status & SRSR_TREQint) { |
931 | ack = sx_in(bp, CD186x_TRAR); | |
932 | ||
933 | if (ack == (SX_ID | GIVR_IT_TX)) | |
934 | sx_transmit(bp); | |
935 | else | |
936 | printk(KERN_ERR "sx%d: status: 0x%x Bad transmit ack 0x%02x. port: %d\n", | |
937 | board_No(bp), status, ack, port_No (sx_get_port (bp, "Int"))); | |
938 | } else if (status & SRSR_MREQint) { | |
939 | ack = sx_in(bp, CD186x_MRAR); | |
940 | ||
d61780c0 | 941 | if (ack == (SX_ID | GIVR_IT_MODEM)) |
1da177e4 LT |
942 | sx_check_modem(bp); |
943 | else | |
944 | printk(KERN_ERR "sx%d: status: 0x%x Bad modem ack 0x%02x.\n", | |
945 | board_No(bp), status, ack); | |
d61780c0 JG |
946 | |
947 | } | |
1da177e4 LT |
948 | |
949 | sx_out(bp, CD186x_EOIR, 0); /* Mark end of interrupt */ | |
950 | } | |
951 | bp->reg = saved_reg; | |
952 | outb (bp->reg, bp->base + SX_ADDR_REG); | |
953 | spin_unlock_irqrestore(&bp->lock, flags); | |
954 | func_exit(); | |
955 | return IRQ_HANDLED; | |
956 | } | |
957 | ||
958 | ||
959 | /* | |
960 | * Routines for open & close processing. | |
961 | */ | |
962 | ||
963 | static void turn_ints_off (struct specialix_board *bp) | |
964 | { | |
965 | unsigned long flags; | |
966 | ||
967 | func_enter(); | |
968 | if (bp->flags & SX_BOARD_IS_PCI) { | |
969 | /* This was intended for enabeling the interrupt on the | |
970 | * PCI card. However it seems that it's already enabled | |
971 | * and as PCI interrupts can be shared, there is no real | |
972 | * reason to have to turn it off. */ | |
973 | } | |
974 | ||
975 | spin_lock_irqsave(&bp->lock, flags); | |
976 | (void) sx_in_off (bp, 0); /* Turn off interrupts. */ | |
977 | spin_unlock_irqrestore(&bp->lock, flags); | |
978 | ||
979 | func_exit(); | |
980 | } | |
981 | ||
982 | static void turn_ints_on (struct specialix_board *bp) | |
983 | { | |
984 | unsigned long flags; | |
985 | ||
986 | func_enter(); | |
987 | ||
988 | if (bp->flags & SX_BOARD_IS_PCI) { | |
989 | /* play with the PCI chip. See comment above. */ | |
990 | } | |
991 | spin_lock_irqsave(&bp->lock, flags); | |
992 | (void) sx_in (bp, 0); /* Turn ON interrupts. */ | |
993 | spin_unlock_irqrestore(&bp->lock, flags); | |
994 | ||
995 | func_exit(); | |
996 | } | |
997 | ||
998 | ||
999 | /* Called with disabled interrupts */ | |
1000 | static inline int sx_setup_board(struct specialix_board * bp) | |
1001 | { | |
1002 | int error; | |
1003 | ||
d61780c0 | 1004 | if (bp->flags & SX_BOARD_ACTIVE) |
1da177e4 LT |
1005 | return 0; |
1006 | ||
1007 | if (bp->flags & SX_BOARD_IS_PCI) | |
0f2ed4c6 | 1008 | error = request_irq(bp->irq, sx_interrupt, IRQF_DISABLED | IRQF_SHARED, "specialix IO8+", bp); |
1da177e4 | 1009 | else |
0f2ed4c6 | 1010 | error = request_irq(bp->irq, sx_interrupt, IRQF_DISABLED, "specialix IO8+", bp); |
1da177e4 | 1011 | |
d61780c0 | 1012 | if (error) |
1da177e4 LT |
1013 | return error; |
1014 | ||
1015 | turn_ints_on (bp); | |
1016 | bp->flags |= SX_BOARD_ACTIVE; | |
1017 | ||
1018 | return 0; | |
1019 | } | |
1020 | ||
1021 | ||
1022 | /* Called with disabled interrupts */ | |
1023 | static inline void sx_shutdown_board(struct specialix_board *bp) | |
1024 | { | |
1025 | func_enter(); | |
1026 | ||
1027 | if (!(bp->flags & SX_BOARD_ACTIVE)) { | |
1028 | func_exit(); | |
1029 | return; | |
1030 | } | |
1031 | ||
1032 | bp->flags &= ~SX_BOARD_ACTIVE; | |
d61780c0 | 1033 | |
1da177e4 LT |
1034 | dprintk (SX_DEBUG_IRQ, "Freeing IRQ%d for board %d.\n", |
1035 | bp->irq, board_No (bp)); | |
1036 | free_irq(bp->irq, bp); | |
1037 | ||
1038 | turn_ints_off (bp); | |
1039 | ||
1040 | ||
1041 | func_exit(); | |
1042 | } | |
1043 | ||
1044 | ||
1045 | /* | |
d61780c0 | 1046 | * Setting up port characteristics. |
1da177e4 LT |
1047 | * Must be called with disabled interrupts |
1048 | */ | |
1049 | static void sx_change_speed(struct specialix_board *bp, struct specialix_port *port) | |
1050 | { | |
1051 | struct tty_struct *tty; | |
1052 | unsigned long baud; | |
1053 | long tmp; | |
1054 | unsigned char cor1 = 0, cor3 = 0; | |
1055 | unsigned char mcor1 = 0, mcor2 = 0; | |
1056 | static unsigned long again; | |
1057 | unsigned long flags; | |
1058 | ||
1059 | func_enter(); | |
1060 | ||
1061 | if (!(tty = port->tty) || !tty->termios) { | |
1062 | func_exit(); | |
1063 | return; | |
1064 | } | |
1065 | ||
1066 | port->IER = 0; | |
1067 | port->COR2 = 0; | |
1068 | /* Select port on the board */ | |
1069 | spin_lock_irqsave(&bp->lock, flags); | |
1070 | sx_out(bp, CD186x_CAR, port_No(port)); | |
1071 | ||
1072 | /* The Specialix board doens't implement the RTS lines. | |
1073 | They are used to set the IRQ level. Don't touch them. */ | |
1074 | if (SX_CRTSCTS(tty)) | |
1075 | port->MSVR = MSVR_DTR | (sx_in(bp, CD186x_MSVR) & MSVR_RTS); | |
1076 | else | |
1077 | port->MSVR = (sx_in(bp, CD186x_MSVR) & MSVR_RTS); | |
1078 | spin_unlock_irqrestore(&bp->lock, flags); | |
1079 | dprintk (SX_DEBUG_TERMIOS, "sx: got MSVR=%02x.\n", port->MSVR); | |
67cc0161 | 1080 | baud = tty_get_baud_rate(tty); |
d61780c0 | 1081 | |
67cc0161 | 1082 | if (baud == 38400) { |
1da177e4 | 1083 | if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) |
a4bb2cf1 | 1084 | baud = 57600; |
1da177e4 | 1085 | if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) |
a4bb2cf1 | 1086 | baud = 115200; |
1da177e4 | 1087 | } |
d61780c0 | 1088 | |
67cc0161 | 1089 | if (!baud) { |
1da177e4 LT |
1090 | /* Drop DTR & exit */ |
1091 | dprintk (SX_DEBUG_TERMIOS, "Dropping DTR... Hmm....\n"); | |
1092 | if (!SX_CRTSCTS (tty)) { | |
1093 | port -> MSVR &= ~ MSVR_DTR; | |
1094 | spin_lock_irqsave(&bp->lock, flags); | |
1095 | sx_out(bp, CD186x_MSVR, port->MSVR ); | |
1096 | spin_unlock_irqrestore(&bp->lock, flags); | |
d61780c0 | 1097 | } |
1da177e4 LT |
1098 | else |
1099 | dprintk (SX_DEBUG_TERMIOS, "Can't drop DTR: no DTR.\n"); | |
1100 | return; | |
1101 | } else { | |
1102 | /* Set DTR on */ | |
1103 | if (!SX_CRTSCTS (tty)) { | |
1104 | port ->MSVR |= MSVR_DTR; | |
1105 | } | |
1106 | } | |
d61780c0 | 1107 | |
1da177e4 | 1108 | /* |
d61780c0 | 1109 | * Now we must calculate some speed depended things |
1da177e4 LT |
1110 | */ |
1111 | ||
1112 | /* Set baud rate for port */ | |
1113 | tmp = port->custom_divisor ; | |
1114 | if ( tmp ) | |
1115 | printk (KERN_INFO "sx%d: Using custom baud rate divisor %ld. \n" | |
1116 | "This is an untested option, please be carefull.\n", | |
1117 | port_No (port), tmp); | |
1118 | else | |
67cc0161 | 1119 | tmp = (((SX_OSCFREQ + baud/2) / baud + |
1da177e4 LT |
1120 | CD186x_TPC/2) / CD186x_TPC); |
1121 | ||
d61780c0 | 1122 | if ((tmp < 0x10) && time_before(again, jiffies)) { |
1da177e4 LT |
1123 | again = jiffies + HZ * 60; |
1124 | /* Page 48 of version 2.0 of the CL-CD1865 databook */ | |
1125 | if (tmp >= 12) { | |
1126 | printk (KERN_INFO "sx%d: Baud rate divisor is %ld. \n" | |
1127 | "Performance degradation is possible.\n" | |
1128 | "Read specialix.txt for more info.\n", | |
1129 | port_No (port), tmp); | |
1130 | } else { | |
1131 | printk (KERN_INFO "sx%d: Baud rate divisor is %ld. \n" | |
1132 | "Warning: overstressing Cirrus chip. " | |
1133 | "This might not work.\n" | |
d61780c0 | 1134 | "Read specialix.txt for more info.\n", |
1da177e4 LT |
1135 | port_No (port), tmp); |
1136 | } | |
1137 | } | |
1138 | spin_lock_irqsave(&bp->lock, flags); | |
d61780c0 JG |
1139 | sx_out(bp, CD186x_RBPRH, (tmp >> 8) & 0xff); |
1140 | sx_out(bp, CD186x_TBPRH, (tmp >> 8) & 0xff); | |
1141 | sx_out(bp, CD186x_RBPRL, tmp & 0xff); | |
1da177e4 LT |
1142 | sx_out(bp, CD186x_TBPRL, tmp & 0xff); |
1143 | spin_unlock_irqrestore(&bp->lock, flags); | |
a4bb2cf1 | 1144 | if (port->custom_divisor) |
1da177e4 | 1145 | baud = (SX_OSCFREQ + port->custom_divisor/2) / port->custom_divisor; |
a4bb2cf1 | 1146 | baud = (baud + 5) / 10; /* Estimated CPS */ |
1da177e4 LT |
1147 | |
1148 | /* Two timer ticks seems enough to wakeup something like SLIP driver */ | |
d61780c0 | 1149 | tmp = ((baud + HZ/2) / HZ) * 2 - CD186x_NFIFO; |
1da177e4 LT |
1150 | port->wakeup_chars = (tmp < 0) ? 0 : ((tmp >= SERIAL_XMIT_SIZE) ? |
1151 | SERIAL_XMIT_SIZE - 1 : tmp); | |
d61780c0 | 1152 | |
1da177e4 LT |
1153 | /* Receiver timeout will be transmission time for 1.5 chars */ |
1154 | tmp = (SPECIALIX_TPS + SPECIALIX_TPS/2 + baud/2) / baud; | |
1155 | tmp = (tmp > 0xff) ? 0xff : tmp; | |
1156 | spin_lock_irqsave(&bp->lock, flags); | |
1157 | sx_out(bp, CD186x_RTPR, tmp); | |
1158 | spin_unlock_irqrestore(&bp->lock, flags); | |
1159 | switch (C_CSIZE(tty)) { | |
1160 | case CS5: | |
1161 | cor1 |= COR1_5BITS; | |
1162 | break; | |
1163 | case CS6: | |
1164 | cor1 |= COR1_6BITS; | |
1165 | break; | |
1166 | case CS7: | |
1167 | cor1 |= COR1_7BITS; | |
1168 | break; | |
1169 | case CS8: | |
1170 | cor1 |= COR1_8BITS; | |
1171 | break; | |
1172 | } | |
d61780c0 JG |
1173 | |
1174 | if (C_CSTOPB(tty)) | |
1da177e4 | 1175 | cor1 |= COR1_2SB; |
d61780c0 | 1176 | |
1da177e4 LT |
1177 | cor1 |= COR1_IGNORE; |
1178 | if (C_PARENB(tty)) { | |
1179 | cor1 |= COR1_NORMPAR; | |
d61780c0 | 1180 | if (C_PARODD(tty)) |
1da177e4 | 1181 | cor1 |= COR1_ODDP; |
d61780c0 | 1182 | if (I_INPCK(tty)) |
1da177e4 LT |
1183 | cor1 &= ~COR1_IGNORE; |
1184 | } | |
1185 | /* Set marking of some errors */ | |
1186 | port->mark_mask = RCSR_OE | RCSR_TOUT; | |
d61780c0 | 1187 | if (I_INPCK(tty)) |
1da177e4 | 1188 | port->mark_mask |= RCSR_FE | RCSR_PE; |
d61780c0 | 1189 | if (I_BRKINT(tty) || I_PARMRK(tty)) |
1da177e4 | 1190 | port->mark_mask |= RCSR_BREAK; |
d61780c0 | 1191 | if (I_IGNPAR(tty)) |
1da177e4 LT |
1192 | port->mark_mask &= ~(RCSR_FE | RCSR_PE); |
1193 | if (I_IGNBRK(tty)) { | |
1194 | port->mark_mask &= ~RCSR_BREAK; | |
d61780c0 | 1195 | if (I_IGNPAR(tty)) |
1da177e4 LT |
1196 | /* Real raw mode. Ignore all */ |
1197 | port->mark_mask &= ~RCSR_OE; | |
1198 | } | |
1199 | /* Enable Hardware Flow Control */ | |
1200 | if (C_CRTSCTS(tty)) { | |
1201 | #ifdef SPECIALIX_BRAIN_DAMAGED_CTS | |
1202 | port->IER |= IER_DSR | IER_CTS; | |
1203 | mcor1 |= MCOR1_DSRZD | MCOR1_CTSZD; | |
1204 | mcor2 |= MCOR2_DSROD | MCOR2_CTSOD; | |
1205 | spin_lock_irqsave(&bp->lock, flags); | |
1206 | tty->hw_stopped = !(sx_in(bp, CD186x_MSVR) & (MSVR_CTS|MSVR_DSR)); | |
1207 | spin_unlock_irqrestore(&bp->lock, flags); | |
1208 | #else | |
d61780c0 | 1209 | port->COR2 |= COR2_CTSAE; |
1da177e4 LT |
1210 | #endif |
1211 | } | |
1212 | /* Enable Software Flow Control. FIXME: I'm not sure about this */ | |
1213 | /* Some people reported that it works, but I still doubt it */ | |
1214 | if (I_IXON(tty)) { | |
1215 | port->COR2 |= COR2_TXIBE; | |
1216 | cor3 |= (COR3_FCT | COR3_SCDE); | |
1217 | if (I_IXANY(tty)) | |
1218 | port->COR2 |= COR2_IXM; | |
1219 | spin_lock_irqsave(&bp->lock, flags); | |
1220 | sx_out(bp, CD186x_SCHR1, START_CHAR(tty)); | |
1221 | sx_out(bp, CD186x_SCHR2, STOP_CHAR(tty)); | |
1222 | sx_out(bp, CD186x_SCHR3, START_CHAR(tty)); | |
1223 | sx_out(bp, CD186x_SCHR4, STOP_CHAR(tty)); | |
1224 | spin_unlock_irqrestore(&bp->lock, flags); | |
1225 | } | |
1226 | if (!C_CLOCAL(tty)) { | |
1227 | /* Enable CD check */ | |
1228 | port->IER |= IER_CD; | |
1229 | mcor1 |= MCOR1_CDZD; | |
1230 | mcor2 |= MCOR2_CDOD; | |
1231 | } | |
d61780c0 JG |
1232 | |
1233 | if (C_CREAD(tty)) | |
1da177e4 LT |
1234 | /* Enable receiver */ |
1235 | port->IER |= IER_RXD; | |
d61780c0 | 1236 | |
1da177e4 LT |
1237 | /* Set input FIFO size (1-8 bytes) */ |
1238 | cor3 |= sx_rxfifo; | |
1239 | /* Setting up CD186x channel registers */ | |
1240 | spin_lock_irqsave(&bp->lock, flags); | |
1241 | sx_out(bp, CD186x_COR1, cor1); | |
1242 | sx_out(bp, CD186x_COR2, port->COR2); | |
1243 | sx_out(bp, CD186x_COR3, cor3); | |
1244 | spin_unlock_irqrestore(&bp->lock, flags); | |
1245 | /* Make CD186x know about registers change */ | |
1246 | sx_wait_CCR(bp); | |
1247 | spin_lock_irqsave(&bp->lock, flags); | |
1248 | sx_out(bp, CD186x_CCR, CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3); | |
1249 | /* Setting up modem option registers */ | |
1250 | dprintk (SX_DEBUG_TERMIOS, "Mcor1 = %02x, mcor2 = %02x.\n", mcor1, mcor2); | |
1251 | sx_out(bp, CD186x_MCOR1, mcor1); | |
1252 | sx_out(bp, CD186x_MCOR2, mcor2); | |
1253 | spin_unlock_irqrestore(&bp->lock, flags); | |
1254 | /* Enable CD186x transmitter & receiver */ | |
1255 | sx_wait_CCR(bp); | |
1256 | spin_lock_irqsave(&bp->lock, flags); | |
1257 | sx_out(bp, CD186x_CCR, CCR_TXEN | CCR_RXEN); | |
1258 | /* Enable interrupts */ | |
1259 | sx_out(bp, CD186x_IER, port->IER); | |
1260 | /* And finally set the modem lines... */ | |
1261 | sx_out(bp, CD186x_MSVR, port->MSVR); | |
1262 | spin_unlock_irqrestore(&bp->lock, flags); | |
1263 | ||
1264 | func_exit(); | |
1265 | } | |
1266 | ||
1267 | ||
1268 | /* Must be called with interrupts enabled */ | |
1269 | static int sx_setup_port(struct specialix_board *bp, struct specialix_port *port) | |
1270 | { | |
1271 | unsigned long flags; | |
1272 | ||
1273 | func_enter(); | |
1274 | ||
1275 | if (port->flags & ASYNC_INITIALIZED) { | |
1276 | func_exit(); | |
1277 | return 0; | |
1278 | } | |
d61780c0 | 1279 | |
1da177e4 LT |
1280 | if (!port->xmit_buf) { |
1281 | /* We may sleep in get_zeroed_page() */ | |
1282 | unsigned long tmp; | |
d61780c0 | 1283 | |
1da177e4 LT |
1284 | if (!(tmp = get_zeroed_page(GFP_KERNEL))) { |
1285 | func_exit(); | |
1286 | return -ENOMEM; | |
1287 | } | |
1288 | ||
1289 | if (port->xmit_buf) { | |
1290 | free_page(tmp); | |
1291 | func_exit(); | |
1292 | return -ERESTARTSYS; | |
1293 | } | |
1294 | port->xmit_buf = (unsigned char *) tmp; | |
1295 | } | |
d61780c0 | 1296 | |
1da177e4 LT |
1297 | spin_lock_irqsave(&port->lock, flags); |
1298 | ||
d61780c0 | 1299 | if (port->tty) |
1da177e4 LT |
1300 | clear_bit(TTY_IO_ERROR, &port->tty->flags); |
1301 | ||
1302 | port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; | |
1303 | sx_change_speed(bp, port); | |
1304 | port->flags |= ASYNC_INITIALIZED; | |
1305 | ||
1306 | spin_unlock_irqrestore(&port->lock, flags); | |
1307 | ||
d61780c0 | 1308 | |
1da177e4 LT |
1309 | func_exit(); |
1310 | return 0; | |
1311 | } | |
1312 | ||
1313 | ||
1314 | /* Must be called with interrupts disabled */ | |
1315 | static void sx_shutdown_port(struct specialix_board *bp, struct specialix_port *port) | |
1316 | { | |
1317 | struct tty_struct *tty; | |
1318 | int i; | |
1319 | unsigned long flags; | |
d61780c0 | 1320 | |
1da177e4 LT |
1321 | func_enter(); |
1322 | ||
1323 | if (!(port->flags & ASYNC_INITIALIZED)) { | |
1324 | func_exit(); | |
1325 | return; | |
1326 | } | |
d61780c0 | 1327 | |
1da177e4 LT |
1328 | if (sx_debug & SX_DEBUG_FIFO) { |
1329 | dprintk(SX_DEBUG_FIFO, "sx%d: port %d: %ld overruns, FIFO hits [ ", | |
1330 | board_No(bp), port_No(port), port->overrun); | |
1331 | for (i = 0; i < 10; i++) { | |
1332 | dprintk(SX_DEBUG_FIFO, "%ld ", port->hits[i]); | |
1333 | } | |
1334 | dprintk(SX_DEBUG_FIFO, "].\n"); | |
1335 | } | |
1336 | ||
1337 | if (port->xmit_buf) { | |
1338 | free_page((unsigned long) port->xmit_buf); | |
1339 | port->xmit_buf = NULL; | |
1340 | } | |
1341 | ||
1342 | /* Select port */ | |
1343 | spin_lock_irqsave(&bp->lock, flags); | |
1344 | sx_out(bp, CD186x_CAR, port_No(port)); | |
1345 | ||
1346 | if (!(tty = port->tty) || C_HUPCL(tty)) { | |
1347 | /* Drop DTR */ | |
1348 | sx_out(bp, CD186x_MSVDTR, 0); | |
1349 | } | |
1350 | spin_unlock_irqrestore(&bp->lock, flags); | |
1351 | /* Reset port */ | |
1352 | sx_wait_CCR(bp); | |
1353 | spin_lock_irqsave(&bp->lock, flags); | |
1354 | sx_out(bp, CD186x_CCR, CCR_SOFTRESET); | |
1355 | /* Disable all interrupts from this port */ | |
1356 | port->IER = 0; | |
1357 | sx_out(bp, CD186x_IER, port->IER); | |
1358 | spin_unlock_irqrestore(&bp->lock, flags); | |
1359 | if (tty) | |
1360 | set_bit(TTY_IO_ERROR, &tty->flags); | |
1361 | port->flags &= ~ASYNC_INITIALIZED; | |
d61780c0 JG |
1362 | |
1363 | if (!bp->count) | |
1da177e4 LT |
1364 | sx_shutdown_board(bp); |
1365 | func_exit(); | |
1366 | } | |
1367 | ||
d61780c0 | 1368 | |
1da177e4 LT |
1369 | static int block_til_ready(struct tty_struct *tty, struct file * filp, |
1370 | struct specialix_port *port) | |
1371 | { | |
1372 | DECLARE_WAITQUEUE(wait, current); | |
1373 | struct specialix_board *bp = port_Board(port); | |
1374 | int retval; | |
1375 | int do_clocal = 0; | |
1376 | int CD; | |
1377 | unsigned long flags; | |
1378 | ||
1379 | func_enter(); | |
1380 | ||
1381 | /* | |
1382 | * If the device is in the middle of being closed, then block | |
1383 | * until it's done, and then try again. | |
1384 | */ | |
1385 | if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) { | |
1386 | interruptible_sleep_on(&port->close_wait); | |
1387 | if (port->flags & ASYNC_HUP_NOTIFY) { | |
1388 | func_exit(); | |
1389 | return -EAGAIN; | |
1390 | } else { | |
1391 | func_exit(); | |
1392 | return -ERESTARTSYS; | |
1393 | } | |
1394 | } | |
d61780c0 | 1395 | |
1da177e4 LT |
1396 | /* |
1397 | * If non-blocking mode is set, or the port is not enabled, | |
1398 | * then make the check up front and then exit. | |
1399 | */ | |
1400 | if ((filp->f_flags & O_NONBLOCK) || | |
1401 | (tty->flags & (1 << TTY_IO_ERROR))) { | |
1402 | port->flags |= ASYNC_NORMAL_ACTIVE; | |
1403 | func_exit(); | |
1404 | return 0; | |
1405 | } | |
1406 | ||
1407 | if (C_CLOCAL(tty)) | |
1408 | do_clocal = 1; | |
1409 | ||
1410 | /* | |
1411 | * Block waiting for the carrier detect and the line to become | |
1412 | * free (i.e., not in use by the callout). While we are in | |
1413 | * this loop, info->count is dropped by one, so that | |
1414 | * rs_close() knows when to free things. We restore it upon | |
1415 | * exit, either normal or abnormal. | |
1416 | */ | |
1417 | retval = 0; | |
1418 | add_wait_queue(&port->open_wait, &wait); | |
1419 | spin_lock_irqsave(&port->lock, flags); | |
1420 | if (!tty_hung_up_p(filp)) { | |
1421 | port->count--; | |
1422 | } | |
1423 | spin_unlock_irqrestore(&port->lock, flags); | |
1424 | port->blocked_open++; | |
1425 | while (1) { | |
1426 | spin_lock_irqsave(&bp->lock, flags); | |
1427 | sx_out(bp, CD186x_CAR, port_No(port)); | |
1428 | CD = sx_in(bp, CD186x_MSVR) & MSVR_CD; | |
1429 | if (SX_CRTSCTS (tty)) { | |
1430 | /* Activate RTS */ | |
1431 | port->MSVR |= MSVR_DTR; /* WTF? */ | |
1432 | sx_out (bp, CD186x_MSVR, port->MSVR); | |
1433 | } else { | |
1434 | /* Activate DTR */ | |
1435 | port->MSVR |= MSVR_DTR; | |
1436 | sx_out (bp, CD186x_MSVR, port->MSVR); | |
1437 | } | |
1438 | spin_unlock_irqrestore(&bp->lock, flags); | |
1439 | set_current_state(TASK_INTERRUPTIBLE); | |
1440 | if (tty_hung_up_p(filp) || | |
1441 | !(port->flags & ASYNC_INITIALIZED)) { | |
1442 | if (port->flags & ASYNC_HUP_NOTIFY) | |
1443 | retval = -EAGAIN; | |
1444 | else | |
d61780c0 | 1445 | retval = -ERESTARTSYS; |
1da177e4 LT |
1446 | break; |
1447 | } | |
1448 | if (!(port->flags & ASYNC_CLOSING) && | |
1449 | (do_clocal || CD)) | |
1450 | break; | |
1451 | if (signal_pending(current)) { | |
1452 | retval = -ERESTARTSYS; | |
1453 | break; | |
1454 | } | |
1455 | schedule(); | |
1456 | } | |
1457 | ||
1458 | set_current_state(TASK_RUNNING); | |
1459 | remove_wait_queue(&port->open_wait, &wait); | |
1460 | spin_lock_irqsave(&port->lock, flags); | |
1461 | if (!tty_hung_up_p(filp)) { | |
1462 | port->count++; | |
1463 | } | |
1464 | port->blocked_open--; | |
1465 | spin_unlock_irqrestore(&port->lock, flags); | |
1466 | if (retval) { | |
1467 | func_exit(); | |
1468 | return retval; | |
1469 | } | |
1470 | ||
1471 | port->flags |= ASYNC_NORMAL_ACTIVE; | |
1472 | func_exit(); | |
1473 | return 0; | |
d61780c0 | 1474 | } |
1da177e4 LT |
1475 | |
1476 | ||
1477 | static int sx_open(struct tty_struct * tty, struct file * filp) | |
1478 | { | |
1479 | int board; | |
1480 | int error; | |
1481 | struct specialix_port * port; | |
1482 | struct specialix_board * bp; | |
1483 | int i; | |
1484 | unsigned long flags; | |
1485 | ||
1486 | func_enter(); | |
1487 | ||
1488 | board = SX_BOARD(tty->index); | |
1489 | ||
1490 | if (board >= SX_NBOARD || !(sx_board[board].flags & SX_BOARD_PRESENT)) { | |
1491 | func_exit(); | |
1492 | return -ENODEV; | |
1493 | } | |
d61780c0 | 1494 | |
1da177e4 LT |
1495 | bp = &sx_board[board]; |
1496 | port = sx_port + board * SX_NPORT + SX_PORT(tty->index); | |
1497 | port->overrun = 0; | |
1498 | for (i = 0; i < 10; i++) | |
1499 | port->hits[i]=0; | |
1500 | ||
1501 | dprintk (SX_DEBUG_OPEN, "Board = %d, bp = %p, port = %p, portno = %d.\n", | |
1502 | board, bp, port, SX_PORT(tty->index)); | |
1503 | ||
1504 | if (sx_paranoia_check(port, tty->name, "sx_open")) { | |
1505 | func_enter(); | |
1506 | return -ENODEV; | |
1507 | } | |
1508 | ||
1509 | if ((error = sx_setup_board(bp))) { | |
1510 | func_exit(); | |
1511 | return error; | |
1512 | } | |
1513 | ||
1514 | spin_lock_irqsave(&bp->lock, flags); | |
1515 | port->count++; | |
1516 | bp->count++; | |
1517 | tty->driver_data = port; | |
1518 | port->tty = tty; | |
1519 | spin_unlock_irqrestore(&bp->lock, flags); | |
1520 | ||
1521 | if ((error = sx_setup_port(bp, port))) { | |
1522 | func_enter(); | |
1523 | return error; | |
1524 | } | |
d61780c0 | 1525 | |
1da177e4 LT |
1526 | if ((error = block_til_ready(tty, filp, port))) { |
1527 | func_enter(); | |
1528 | return error; | |
1529 | } | |
1530 | ||
1531 | func_exit(); | |
1532 | return 0; | |
1533 | } | |
1534 | ||
1535 | ||
1536 | static void sx_close(struct tty_struct * tty, struct file * filp) | |
1537 | { | |
1538 | struct specialix_port *port = (struct specialix_port *) tty->driver_data; | |
1539 | struct specialix_board *bp; | |
1540 | unsigned long flags; | |
1541 | unsigned long timeout; | |
d61780c0 | 1542 | |
1da177e4 LT |
1543 | func_enter(); |
1544 | if (!port || sx_paranoia_check(port, tty->name, "close")) { | |
1545 | func_exit(); | |
1546 | return; | |
1547 | } | |
1548 | spin_lock_irqsave(&port->lock, flags); | |
1549 | ||
1550 | if (tty_hung_up_p(filp)) { | |
1551 | spin_unlock_irqrestore(&port->lock, flags); | |
1552 | func_exit(); | |
1553 | return; | |
1554 | } | |
d61780c0 | 1555 | |
1da177e4 LT |
1556 | bp = port_Board(port); |
1557 | if ((tty->count == 1) && (port->count != 1)) { | |
1558 | printk(KERN_ERR "sx%d: sx_close: bad port count;" | |
1559 | " tty->count is 1, port count is %d\n", | |
1560 | board_No(bp), port->count); | |
1561 | port->count = 1; | |
1562 | } | |
1563 | ||
1564 | if (port->count > 1) { | |
1565 | port->count--; | |
1566 | bp->count--; | |
1567 | ||
1568 | spin_unlock_irqrestore(&port->lock, flags); | |
1569 | ||
1570 | func_exit(); | |
1571 | return; | |
1572 | } | |
1573 | port->flags |= ASYNC_CLOSING; | |
1574 | /* | |
d61780c0 | 1575 | * Now we wait for the transmit buffer to clear; and we notify |
1da177e4 LT |
1576 | * the line discipline to only process XON/XOFF characters. |
1577 | */ | |
1578 | tty->closing = 1; | |
1579 | spin_unlock_irqrestore(&port->lock, flags); | |
1580 | dprintk (SX_DEBUG_OPEN, "Closing\n"); | |
1581 | if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) { | |
1582 | tty_wait_until_sent(tty, port->closing_wait); | |
1583 | } | |
1584 | /* | |
1585 | * At this point we stop accepting input. To do this, we | |
1586 | * disable the receive line status interrupts, and tell the | |
1587 | * interrupt driver to stop checking the data ready bit in the | |
1588 | * line status register. | |
1589 | */ | |
1590 | dprintk (SX_DEBUG_OPEN, "Closed\n"); | |
1591 | port->IER &= ~IER_RXD; | |
1592 | if (port->flags & ASYNC_INITIALIZED) { | |
1593 | port->IER &= ~IER_TXRDY; | |
1594 | port->IER |= IER_TXEMPTY; | |
1595 | spin_lock_irqsave(&bp->lock, flags); | |
1596 | sx_out(bp, CD186x_CAR, port_No(port)); | |
1597 | sx_out(bp, CD186x_IER, port->IER); | |
1598 | spin_unlock_irqrestore(&bp->lock, flags); | |
1599 | /* | |
1600 | * Before we drop DTR, make sure the UART transmitter | |
1601 | * has completely drained; this is especially | |
1602 | * important if there is a transmit FIFO! | |
1603 | */ | |
1604 | timeout = jiffies+HZ; | |
1605 | while(port->IER & IER_TXEMPTY) { | |
1606 | set_current_state (TASK_INTERRUPTIBLE); | |
1607 | msleep_interruptible(jiffies_to_msecs(port->timeout)); | |
1608 | if (time_after(jiffies, timeout)) { | |
1609 | printk (KERN_INFO "Timeout waiting for close\n"); | |
1610 | break; | |
1611 | } | |
1612 | } | |
1613 | ||
1614 | } | |
1615 | ||
1616 | if (--bp->count < 0) { | |
1617 | printk(KERN_ERR "sx%d: sx_shutdown_port: bad board count: %d port: %d\n", | |
1618 | board_No(bp), bp->count, tty->index); | |
1619 | bp->count = 0; | |
1620 | } | |
1621 | if (--port->count < 0) { | |
1622 | printk(KERN_ERR "sx%d: sx_close: bad port count for tty%d: %d\n", | |
1623 | board_No(bp), port_No(port), port->count); | |
1624 | port->count = 0; | |
1625 | } | |
1626 | ||
1627 | sx_shutdown_port(bp, port); | |
1628 | if (tty->driver->flush_buffer) | |
1629 | tty->driver->flush_buffer(tty); | |
1630 | tty_ldisc_flush(tty); | |
1631 | spin_lock_irqsave(&port->lock, flags); | |
1632 | tty->closing = 0; | |
1633 | port->event = 0; | |
1634 | port->tty = NULL; | |
1635 | spin_unlock_irqrestore(&port->lock, flags); | |
1636 | if (port->blocked_open) { | |
1637 | if (port->close_delay) { | |
1638 | msleep_interruptible(jiffies_to_msecs(port->close_delay)); | |
1639 | } | |
1640 | wake_up_interruptible(&port->open_wait); | |
1641 | } | |
1642 | port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); | |
1643 | wake_up_interruptible(&port->close_wait); | |
1644 | ||
1645 | func_exit(); | |
1646 | } | |
1647 | ||
1648 | ||
d61780c0 | 1649 | static int sx_write(struct tty_struct * tty, |
1da177e4 LT |
1650 | const unsigned char *buf, int count) |
1651 | { | |
1652 | struct specialix_port *port = (struct specialix_port *)tty->driver_data; | |
1653 | struct specialix_board *bp; | |
1654 | int c, total = 0; | |
1655 | unsigned long flags; | |
1656 | ||
1657 | func_enter(); | |
1658 | if (sx_paranoia_check(port, tty->name, "sx_write")) { | |
1659 | func_exit(); | |
1660 | return 0; | |
1661 | } | |
d61780c0 | 1662 | |
1da177e4 LT |
1663 | bp = port_Board(port); |
1664 | ||
365e0223 | 1665 | if (!port->xmit_buf) { |
1da177e4 LT |
1666 | func_exit(); |
1667 | return 0; | |
1668 | } | |
1669 | ||
1670 | while (1) { | |
1671 | spin_lock_irqsave(&port->lock, flags); | |
1672 | c = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1, | |
1673 | SERIAL_XMIT_SIZE - port->xmit_head)); | |
1674 | if (c <= 0) { | |
1675 | spin_unlock_irqrestore(&port->lock, flags); | |
1676 | break; | |
1677 | } | |
1678 | memcpy(port->xmit_buf + port->xmit_head, buf, c); | |
1679 | port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1); | |
1680 | port->xmit_cnt += c; | |
1681 | spin_unlock_irqrestore(&port->lock, flags); | |
1682 | ||
1683 | buf += c; | |
1684 | count -= c; | |
1685 | total += c; | |
1686 | } | |
1687 | ||
1688 | spin_lock_irqsave(&bp->lock, flags); | |
1689 | if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped && | |
1690 | !(port->IER & IER_TXRDY)) { | |
1691 | port->IER |= IER_TXRDY; | |
1692 | sx_out(bp, CD186x_CAR, port_No(port)); | |
1693 | sx_out(bp, CD186x_IER, port->IER); | |
1694 | } | |
1695 | spin_unlock_irqrestore(&bp->lock, flags); | |
1696 | func_exit(); | |
1697 | ||
1698 | return total; | |
1699 | } | |
1700 | ||
1701 | ||
1702 | static void sx_put_char(struct tty_struct * tty, unsigned char ch) | |
1703 | { | |
1704 | struct specialix_port *port = (struct specialix_port *)tty->driver_data; | |
1705 | unsigned long flags; | |
1706 | struct specialix_board * bp; | |
1707 | ||
1708 | func_enter(); | |
1709 | ||
1710 | if (sx_paranoia_check(port, tty->name, "sx_put_char")) { | |
1711 | func_exit(); | |
1712 | return; | |
1713 | } | |
1714 | dprintk (SX_DEBUG_TX, "check tty: %p %p\n", tty, port->xmit_buf); | |
326f28e9 | 1715 | if (!port->xmit_buf) { |
1da177e4 LT |
1716 | func_exit(); |
1717 | return; | |
1718 | } | |
1719 | bp = port_Board(port); | |
1720 | spin_lock_irqsave(&port->lock, flags); | |
1721 | ||
1722 | dprintk (SX_DEBUG_TX, "xmit_cnt: %d xmit_buf: %p\n", port->xmit_cnt, port->xmit_buf); | |
1723 | if ((port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) || (!port->xmit_buf)) { | |
1724 | spin_unlock_irqrestore(&port->lock, flags); | |
1725 | dprintk (SX_DEBUG_TX, "Exit size\n"); | |
1726 | func_exit(); | |
1727 | return; | |
1728 | } | |
1729 | dprintk (SX_DEBUG_TX, "Handle xmit: %p %p\n", port, port->xmit_buf); | |
1730 | port->xmit_buf[port->xmit_head++] = ch; | |
1731 | port->xmit_head &= SERIAL_XMIT_SIZE - 1; | |
1732 | port->xmit_cnt++; | |
1733 | spin_unlock_irqrestore(&port->lock, flags); | |
1734 | ||
1735 | func_exit(); | |
1736 | } | |
1737 | ||
1738 | ||
1739 | static void sx_flush_chars(struct tty_struct * tty) | |
1740 | { | |
1741 | struct specialix_port *port = (struct specialix_port *)tty->driver_data; | |
1742 | unsigned long flags; | |
1743 | struct specialix_board * bp = port_Board(port); | |
1744 | ||
1745 | func_enter(); | |
1746 | ||
1747 | if (sx_paranoia_check(port, tty->name, "sx_flush_chars")) { | |
1748 | func_exit(); | |
1749 | return; | |
1750 | } | |
1751 | if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || | |
1752 | !port->xmit_buf) { | |
1753 | func_exit(); | |
1754 | return; | |
1755 | } | |
1756 | spin_lock_irqsave(&bp->lock, flags); | |
1757 | port->IER |= IER_TXRDY; | |
1758 | sx_out(port_Board(port), CD186x_CAR, port_No(port)); | |
1759 | sx_out(port_Board(port), CD186x_IER, port->IER); | |
1760 | spin_unlock_irqrestore(&bp->lock, flags); | |
1761 | ||
1762 | func_exit(); | |
1763 | } | |
1764 | ||
1765 | ||
1766 | static int sx_write_room(struct tty_struct * tty) | |
1767 | { | |
1768 | struct specialix_port *port = (struct specialix_port *)tty->driver_data; | |
1769 | int ret; | |
1770 | ||
1771 | func_enter(); | |
1772 | ||
1773 | if (sx_paranoia_check(port, tty->name, "sx_write_room")) { | |
1774 | func_exit(); | |
1775 | return 0; | |
1776 | } | |
1777 | ||
1778 | ret = SERIAL_XMIT_SIZE - port->xmit_cnt - 1; | |
1779 | if (ret < 0) | |
1780 | ret = 0; | |
1781 | ||
1782 | func_exit(); | |
1783 | return ret; | |
1784 | } | |
1785 | ||
1786 | ||
1787 | static int sx_chars_in_buffer(struct tty_struct *tty) | |
1788 | { | |
1789 | struct specialix_port *port = (struct specialix_port *)tty->driver_data; | |
1790 | ||
1791 | func_enter(); | |
d61780c0 | 1792 | |
1da177e4 LT |
1793 | if (sx_paranoia_check(port, tty->name, "sx_chars_in_buffer")) { |
1794 | func_exit(); | |
1795 | return 0; | |
1796 | } | |
1797 | func_exit(); | |
1798 | return port->xmit_cnt; | |
1799 | } | |
1800 | ||
1801 | ||
1802 | static void sx_flush_buffer(struct tty_struct *tty) | |
1803 | { | |
1804 | struct specialix_port *port = (struct specialix_port *)tty->driver_data; | |
1805 | unsigned long flags; | |
1806 | struct specialix_board * bp; | |
1807 | ||
1808 | func_enter(); | |
1809 | ||
1810 | if (sx_paranoia_check(port, tty->name, "sx_flush_buffer")) { | |
1811 | func_exit(); | |
1812 | return; | |
1813 | } | |
1814 | ||
1815 | bp = port_Board(port); | |
1816 | spin_lock_irqsave(&port->lock, flags); | |
1817 | port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; | |
1818 | spin_unlock_irqrestore(&port->lock, flags); | |
1819 | tty_wakeup(tty); | |
1820 | ||
1821 | func_exit(); | |
1822 | } | |
1823 | ||
1824 | ||
1825 | static int sx_tiocmget(struct tty_struct *tty, struct file *file) | |
1826 | { | |
1827 | struct specialix_port *port = (struct specialix_port *)tty->driver_data; | |
1828 | struct specialix_board * bp; | |
1829 | unsigned char status; | |
1830 | unsigned int result; | |
1831 | unsigned long flags; | |
1832 | ||
1833 | func_enter(); | |
1834 | ||
1835 | if (sx_paranoia_check(port, tty->name, __FUNCTION__)) { | |
1836 | func_exit(); | |
1837 | return -ENODEV; | |
1838 | } | |
1839 | ||
1840 | bp = port_Board(port); | |
1841 | spin_lock_irqsave (&bp->lock, flags); | |
1842 | sx_out(bp, CD186x_CAR, port_No(port)); | |
1843 | status = sx_in(bp, CD186x_MSVR); | |
1844 | spin_unlock_irqrestore(&bp->lock, flags); | |
1845 | dprintk (SX_DEBUG_INIT, "Got msvr[%d] = %02x, car = %d.\n", | |
1846 | port_No(port), status, sx_in (bp, CD186x_CAR)); | |
1847 | dprintk (SX_DEBUG_INIT, "sx_port = %p, port = %p\n", sx_port, port); | |
1848 | if (SX_CRTSCTS(port->tty)) { | |
d61780c0 | 1849 | result = /* (status & MSVR_RTS) ? */ TIOCM_DTR /* : 0) */ |
1da177e4 LT |
1850 | | ((status & MSVR_DTR) ? TIOCM_RTS : 0) |
1851 | | ((status & MSVR_CD) ? TIOCM_CAR : 0) | |
1852 | |/* ((status & MSVR_DSR) ? */ TIOCM_DSR /* : 0) */ | |
1853 | | ((status & MSVR_CTS) ? TIOCM_CTS : 0); | |
1854 | } else { | |
d61780c0 | 1855 | result = /* (status & MSVR_RTS) ? */ TIOCM_RTS /* : 0) */ |
1da177e4 LT |
1856 | | ((status & MSVR_DTR) ? TIOCM_DTR : 0) |
1857 | | ((status & MSVR_CD) ? TIOCM_CAR : 0) | |
1858 | |/* ((status & MSVR_DSR) ? */ TIOCM_DSR /* : 0) */ | |
1859 | | ((status & MSVR_CTS) ? TIOCM_CTS : 0); | |
1860 | } | |
1861 | ||
1862 | func_exit(); | |
1863 | ||
1864 | return result; | |
1865 | } | |
1866 | ||
1867 | ||
1868 | static int sx_tiocmset(struct tty_struct *tty, struct file *file, | |
1869 | unsigned int set, unsigned int clear) | |
1870 | { | |
1871 | struct specialix_port *port = (struct specialix_port *)tty->driver_data; | |
1872 | unsigned long flags; | |
1873 | struct specialix_board *bp; | |
1874 | ||
1875 | func_enter(); | |
1876 | ||
1877 | if (sx_paranoia_check(port, tty->name, __FUNCTION__)) { | |
1878 | func_exit(); | |
1879 | return -ENODEV; | |
1880 | } | |
1881 | ||
1882 | bp = port_Board(port); | |
1883 | ||
1884 | spin_lock_irqsave(&port->lock, flags); | |
1885 | /* if (set & TIOCM_RTS) | |
1886 | port->MSVR |= MSVR_RTS; */ | |
1887 | /* if (set & TIOCM_DTR) | |
1888 | port->MSVR |= MSVR_DTR; */ | |
1889 | ||
1890 | if (SX_CRTSCTS(port->tty)) { | |
1891 | if (set & TIOCM_RTS) | |
1892 | port->MSVR |= MSVR_DTR; | |
1893 | } else { | |
1894 | if (set & TIOCM_DTR) | |
1895 | port->MSVR |= MSVR_DTR; | |
1896 | } | |
1897 | ||
1898 | /* if (clear & TIOCM_RTS) | |
1899 | port->MSVR &= ~MSVR_RTS; */ | |
1900 | /* if (clear & TIOCM_DTR) | |
1901 | port->MSVR &= ~MSVR_DTR; */ | |
1902 | if (SX_CRTSCTS(port->tty)) { | |
1903 | if (clear & TIOCM_RTS) | |
1904 | port->MSVR &= ~MSVR_DTR; | |
1905 | } else { | |
1906 | if (clear & TIOCM_DTR) | |
1907 | port->MSVR &= ~MSVR_DTR; | |
1908 | } | |
1909 | spin_lock_irqsave(&bp->lock, flags); | |
1910 | sx_out(bp, CD186x_CAR, port_No(port)); | |
1911 | sx_out(bp, CD186x_MSVR, port->MSVR); | |
1912 | spin_unlock_irqrestore(&bp->lock, flags); | |
1913 | spin_unlock_irqrestore(&port->lock, flags); | |
1914 | func_exit(); | |
1915 | return 0; | |
1916 | } | |
1917 | ||
1918 | ||
1919 | static inline void sx_send_break(struct specialix_port * port, unsigned long length) | |
1920 | { | |
1921 | struct specialix_board *bp = port_Board(port); | |
1922 | unsigned long flags; | |
d61780c0 | 1923 | |
1da177e4 LT |
1924 | func_enter(); |
1925 | ||
1926 | spin_lock_irqsave (&port->lock, flags); | |
1927 | port->break_length = SPECIALIX_TPS / HZ * length; | |
1928 | port->COR2 |= COR2_ETC; | |
1929 | port->IER |= IER_TXRDY; | |
1930 | spin_lock_irqsave(&bp->lock, flags); | |
1931 | sx_out(bp, CD186x_CAR, port_No(port)); | |
1932 | sx_out(bp, CD186x_COR2, port->COR2); | |
1933 | sx_out(bp, CD186x_IER, port->IER); | |
1934 | spin_unlock_irqrestore(&bp->lock, flags); | |
1935 | spin_unlock_irqrestore (&port->lock, flags); | |
1936 | sx_wait_CCR(bp); | |
1937 | spin_lock_irqsave(&bp->lock, flags); | |
1938 | sx_out(bp, CD186x_CCR, CCR_CORCHG2); | |
1939 | spin_unlock_irqrestore(&bp->lock, flags); | |
1940 | sx_wait_CCR(bp); | |
1941 | ||
1942 | func_exit(); | |
1943 | } | |
1944 | ||
1945 | ||
1946 | static inline int sx_set_serial_info(struct specialix_port * port, | |
1947 | struct serial_struct __user * newinfo) | |
1948 | { | |
1949 | struct serial_struct tmp; | |
1950 | struct specialix_board *bp = port_Board(port); | |
1951 | int change_speed; | |
1952 | ||
1953 | func_enter(); | |
1954 | /* | |
e49332bd | 1955 | if (!access_ok(VERIFY_READ, (void *) newinfo, sizeof(tmp))) { |
1da177e4 | 1956 | func_exit(); |
e49332bd | 1957 | return -EFAULT; |
1da177e4 LT |
1958 | } |
1959 | */ | |
1960 | if (copy_from_user(&tmp, newinfo, sizeof(tmp))) { | |
1961 | func_enter(); | |
1962 | return -EFAULT; | |
1963 | } | |
d61780c0 JG |
1964 | |
1965 | #if 0 | |
1da177e4 LT |
1966 | if ((tmp.irq != bp->irq) || |
1967 | (tmp.port != bp->base) || | |
1968 | (tmp.type != PORT_CIRRUS) || | |
1969 | (tmp.baud_base != (SX_OSCFREQ + CD186x_TPC/2) / CD186x_TPC) || | |
1970 | (tmp.custom_divisor != 0) || | |
1971 | (tmp.xmit_fifo_size != CD186x_NFIFO) || | |
1972 | (tmp.flags & ~SPECIALIX_LEGAL_FLAGS)) { | |
1973 | func_exit(); | |
1974 | return -EINVAL; | |
1975 | } | |
d61780c0 | 1976 | #endif |
1da177e4 LT |
1977 | |
1978 | change_speed = ((port->flags & ASYNC_SPD_MASK) != | |
1979 | (tmp.flags & ASYNC_SPD_MASK)); | |
1980 | change_speed |= (tmp.custom_divisor != port->custom_divisor); | |
d61780c0 | 1981 | |
1da177e4 LT |
1982 | if (!capable(CAP_SYS_ADMIN)) { |
1983 | if ((tmp.close_delay != port->close_delay) || | |
1984 | (tmp.closing_wait != port->closing_wait) || | |
1985 | ((tmp.flags & ~ASYNC_USR_MASK) != | |
1986 | (port->flags & ~ASYNC_USR_MASK))) { | |
1987 | func_exit(); | |
1988 | return -EPERM; | |
1989 | } | |
1990 | port->flags = ((port->flags & ~ASYNC_USR_MASK) | | |
1991 | (tmp.flags & ASYNC_USR_MASK)); | |
1992 | port->custom_divisor = tmp.custom_divisor; | |
1993 | } else { | |
1994 | port->flags = ((port->flags & ~ASYNC_FLAGS) | | |
1995 | (tmp.flags & ASYNC_FLAGS)); | |
1996 | port->close_delay = tmp.close_delay; | |
1997 | port->closing_wait = tmp.closing_wait; | |
1998 | port->custom_divisor = tmp.custom_divisor; | |
1999 | } | |
2000 | if (change_speed) { | |
2001 | sx_change_speed(bp, port); | |
2002 | } | |
2003 | func_exit(); | |
2004 | return 0; | |
2005 | } | |
2006 | ||
2007 | ||
2008 | static inline int sx_get_serial_info(struct specialix_port * port, | |
2009 | struct serial_struct __user *retinfo) | |
2010 | { | |
2011 | struct serial_struct tmp; | |
2012 | struct specialix_board *bp = port_Board(port); | |
d61780c0 | 2013 | |
1da177e4 LT |
2014 | func_enter(); |
2015 | ||
2016 | /* | |
e49332bd JJ |
2017 | if (!access_ok(VERIFY_WRITE, (void *) retinfo, sizeof(tmp))) |
2018 | return -EFAULT; | |
1da177e4 LT |
2019 | */ |
2020 | ||
2021 | memset(&tmp, 0, sizeof(tmp)); | |
2022 | tmp.type = PORT_CIRRUS; | |
2023 | tmp.line = port - sx_port; | |
2024 | tmp.port = bp->base; | |
2025 | tmp.irq = bp->irq; | |
2026 | tmp.flags = port->flags; | |
2027 | tmp.baud_base = (SX_OSCFREQ + CD186x_TPC/2) / CD186x_TPC; | |
2028 | tmp.close_delay = port->close_delay * HZ/100; | |
2029 | tmp.closing_wait = port->closing_wait * HZ/100; | |
2030 | tmp.custom_divisor = port->custom_divisor; | |
2031 | tmp.xmit_fifo_size = CD186x_NFIFO; | |
2032 | if (copy_to_user(retinfo, &tmp, sizeof(tmp))) { | |
2033 | func_exit(); | |
2034 | return -EFAULT; | |
2035 | } | |
2036 | ||
2037 | func_exit(); | |
2038 | return 0; | |
2039 | } | |
2040 | ||
2041 | ||
d61780c0 | 2042 | static int sx_ioctl(struct tty_struct * tty, struct file * filp, |
1da177e4 LT |
2043 | unsigned int cmd, unsigned long arg) |
2044 | { | |
2045 | struct specialix_port *port = (struct specialix_port *)tty->driver_data; | |
2046 | int retval; | |
2047 | void __user *argp = (void __user *)arg; | |
2048 | ||
2049 | func_enter(); | |
2050 | ||
2051 | if (sx_paranoia_check(port, tty->name, "sx_ioctl")) { | |
2052 | func_exit(); | |
2053 | return -ENODEV; | |
2054 | } | |
d61780c0 | 2055 | |
1da177e4 LT |
2056 | switch (cmd) { |
2057 | case TCSBRK: /* SVID version: non-zero arg --> no break */ | |
2058 | retval = tty_check_change(tty); | |
2059 | if (retval) { | |
2060 | func_exit(); | |
2061 | return retval; | |
2062 | } | |
2063 | tty_wait_until_sent(tty, 0); | |
2064 | if (!arg) | |
2065 | sx_send_break(port, HZ/4); /* 1/4 second */ | |
2066 | return 0; | |
2067 | case TCSBRKP: /* support for POSIX tcsendbreak() */ | |
2068 | retval = tty_check_change(tty); | |
2069 | if (retval) { | |
2070 | func_exit(); | |
2071 | return retval; | |
2072 | } | |
2073 | tty_wait_until_sent(tty, 0); | |
2074 | sx_send_break(port, arg ? arg*(HZ/10) : HZ/4); | |
2075 | func_exit(); | |
2076 | return 0; | |
2077 | case TIOCGSOFTCAR: | |
2078 | if (put_user(C_CLOCAL(tty)?1:0, (unsigned long __user *)argp)) { | |
2079 | func_exit(); | |
2080 | return -EFAULT; | |
2081 | } | |
2082 | func_exit(); | |
2083 | return 0; | |
2084 | case TIOCSSOFTCAR: | |
2085 | if (get_user(arg, (unsigned long __user *) argp)) { | |
2086 | func_exit(); | |
2087 | return -EFAULT; | |
2088 | } | |
2089 | tty->termios->c_cflag = | |
2090 | ((tty->termios->c_cflag & ~CLOCAL) | | |
2091 | (arg ? CLOCAL : 0)); | |
2092 | func_exit(); | |
2093 | return 0; | |
2094 | case TIOCGSERIAL: | |
2095 | func_exit(); | |
2096 | return sx_get_serial_info(port, argp); | |
d61780c0 | 2097 | case TIOCSSERIAL: |
1da177e4 LT |
2098 | func_exit(); |
2099 | return sx_set_serial_info(port, argp); | |
2100 | default: | |
2101 | func_exit(); | |
2102 | return -ENOIOCTLCMD; | |
2103 | } | |
2104 | func_exit(); | |
2105 | return 0; | |
2106 | } | |
2107 | ||
2108 | ||
2109 | static void sx_throttle(struct tty_struct * tty) | |
2110 | { | |
2111 | struct specialix_port *port = (struct specialix_port *)tty->driver_data; | |
2112 | struct specialix_board *bp; | |
2113 | unsigned long flags; | |
2114 | ||
2115 | func_enter(); | |
2116 | ||
2117 | if (sx_paranoia_check(port, tty->name, "sx_throttle")) { | |
2118 | func_exit(); | |
2119 | return; | |
2120 | } | |
d61780c0 | 2121 | |
1da177e4 | 2122 | bp = port_Board(port); |
d61780c0 | 2123 | |
1da177e4 | 2124 | /* Use DTR instead of RTS ! */ |
d61780c0 | 2125 | if (SX_CRTSCTS (tty)) |
1da177e4 LT |
2126 | port->MSVR &= ~MSVR_DTR; |
2127 | else { | |
2128 | /* Auch!!! I think the system shouldn't call this then. */ | |
2129 | /* Or maybe we're supposed (allowed?) to do our side of hw | |
d61780c0 | 2130 | handshake anyway, even when hardware handshake is off. |
1da177e4 LT |
2131 | When you see this in your logs, please report.... */ |
2132 | printk (KERN_ERR "sx%d: Need to throttle, but can't (hardware hs is off)\n", | |
2133 | port_No (port)); | |
2134 | } | |
2135 | spin_lock_irqsave(&bp->lock, flags); | |
2136 | sx_out(bp, CD186x_CAR, port_No(port)); | |
2137 | spin_unlock_irqrestore(&bp->lock, flags); | |
2138 | if (I_IXOFF(tty)) { | |
2139 | spin_unlock_irqrestore(&bp->lock, flags); | |
2140 | sx_wait_CCR(bp); | |
2141 | spin_lock_irqsave(&bp->lock, flags); | |
2142 | sx_out(bp, CD186x_CCR, CCR_SSCH2); | |
2143 | spin_unlock_irqrestore(&bp->lock, flags); | |
2144 | sx_wait_CCR(bp); | |
2145 | } | |
2146 | spin_lock_irqsave(&bp->lock, flags); | |
2147 | sx_out(bp, CD186x_MSVR, port->MSVR); | |
2148 | spin_unlock_irqrestore(&bp->lock, flags); | |
2149 | ||
2150 | func_exit(); | |
2151 | } | |
2152 | ||
2153 | ||
2154 | static void sx_unthrottle(struct tty_struct * tty) | |
2155 | { | |
2156 | struct specialix_port *port = (struct specialix_port *)tty->driver_data; | |
2157 | struct specialix_board *bp; | |
2158 | unsigned long flags; | |
2159 | ||
2160 | func_enter(); | |
d61780c0 | 2161 | |
1da177e4 LT |
2162 | if (sx_paranoia_check(port, tty->name, "sx_unthrottle")) { |
2163 | func_exit(); | |
2164 | return; | |
2165 | } | |
d61780c0 | 2166 | |
1da177e4 | 2167 | bp = port_Board(port); |
d61780c0 | 2168 | |
1da177e4 LT |
2169 | spin_lock_irqsave(&port->lock, flags); |
2170 | /* XXXX Use DTR INSTEAD???? */ | |
2171 | if (SX_CRTSCTS(tty)) { | |
2172 | port->MSVR |= MSVR_DTR; | |
2173 | } /* Else clause: see remark in "sx_throttle"... */ | |
2174 | spin_lock_irqsave(&bp->lock, flags); | |
2175 | sx_out(bp, CD186x_CAR, port_No(port)); | |
2176 | spin_unlock_irqrestore(&bp->lock, flags); | |
2177 | if (I_IXOFF(tty)) { | |
2178 | spin_unlock_irqrestore(&port->lock, flags); | |
2179 | sx_wait_CCR(bp); | |
2180 | spin_lock_irqsave(&bp->lock, flags); | |
2181 | sx_out(bp, CD186x_CCR, CCR_SSCH1); | |
2182 | spin_unlock_irqrestore(&bp->lock, flags); | |
2183 | sx_wait_CCR(bp); | |
2184 | spin_lock_irqsave(&port->lock, flags); | |
2185 | } | |
2186 | spin_lock_irqsave(&bp->lock, flags); | |
2187 | sx_out(bp, CD186x_MSVR, port->MSVR); | |
2188 | spin_unlock_irqrestore(&bp->lock, flags); | |
2189 | spin_unlock_irqrestore(&port->lock, flags); | |
2190 | ||
2191 | func_exit(); | |
2192 | } | |
2193 | ||
2194 | ||
2195 | static void sx_stop(struct tty_struct * tty) | |
2196 | { | |
2197 | struct specialix_port *port = (struct specialix_port *)tty->driver_data; | |
2198 | struct specialix_board *bp; | |
2199 | unsigned long flags; | |
2200 | ||
2201 | func_enter(); | |
d61780c0 | 2202 | |
1da177e4 LT |
2203 | if (sx_paranoia_check(port, tty->name, "sx_stop")) { |
2204 | func_exit(); | |
2205 | return; | |
2206 | } | |
2207 | ||
2208 | bp = port_Board(port); | |
d61780c0 | 2209 | |
1da177e4 LT |
2210 | spin_lock_irqsave(&port->lock, flags); |
2211 | port->IER &= ~IER_TXRDY; | |
2212 | spin_lock_irqsave(&bp->lock, flags); | |
2213 | sx_out(bp, CD186x_CAR, port_No(port)); | |
2214 | sx_out(bp, CD186x_IER, port->IER); | |
2215 | spin_unlock_irqrestore(&bp->lock, flags); | |
2216 | spin_unlock_irqrestore(&port->lock, flags); | |
2217 | ||
2218 | func_exit(); | |
2219 | } | |
2220 | ||
2221 | ||
2222 | static void sx_start(struct tty_struct * tty) | |
2223 | { | |
2224 | struct specialix_port *port = (struct specialix_port *)tty->driver_data; | |
2225 | struct specialix_board *bp; | |
2226 | unsigned long flags; | |
2227 | ||
2228 | func_enter(); | |
d61780c0 | 2229 | |
1da177e4 LT |
2230 | if (sx_paranoia_check(port, tty->name, "sx_start")) { |
2231 | func_exit(); | |
2232 | return; | |
2233 | } | |
d61780c0 | 2234 | |
1da177e4 | 2235 | bp = port_Board(port); |
d61780c0 | 2236 | |
1da177e4 LT |
2237 | spin_lock_irqsave(&port->lock, flags); |
2238 | if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) { | |
2239 | port->IER |= IER_TXRDY; | |
2240 | spin_lock_irqsave(&bp->lock, flags); | |
2241 | sx_out(bp, CD186x_CAR, port_No(port)); | |
2242 | sx_out(bp, CD186x_IER, port->IER); | |
2243 | spin_unlock_irqrestore(&bp->lock, flags); | |
2244 | } | |
2245 | spin_unlock_irqrestore(&port->lock, flags); | |
2246 | ||
2247 | func_exit(); | |
2248 | } | |
2249 | ||
2250 | ||
2251 | /* | |
2252 | * This routine is called from the work-queue when the interrupt | |
2253 | * routine has signalled that a hangup has occurred. The path of | |
2254 | * hangup processing is: | |
2255 | * | |
2256 | * serial interrupt routine -> (workqueue) -> | |
2257 | * do_sx_hangup() -> tty->hangup() -> sx_hangup() | |
d61780c0 | 2258 | * |
1da177e4 | 2259 | */ |
c4028958 | 2260 | static void do_sx_hangup(struct work_struct *work) |
1da177e4 | 2261 | { |
c4028958 DH |
2262 | struct specialix_port *port = |
2263 | container_of(work, struct specialix_port, tqueue_hangup); | |
1da177e4 | 2264 | struct tty_struct *tty; |
d61780c0 | 2265 | |
1da177e4 LT |
2266 | func_enter(); |
2267 | ||
2268 | tty = port->tty; | |
2269 | if (tty) | |
2270 | tty_hangup(tty); /* FIXME: module removal race here */ | |
2271 | ||
2272 | func_exit(); | |
2273 | } | |
2274 | ||
2275 | ||
2276 | static void sx_hangup(struct tty_struct * tty) | |
2277 | { | |
2278 | struct specialix_port *port = (struct specialix_port *)tty->driver_data; | |
2279 | struct specialix_board *bp; | |
2280 | unsigned long flags; | |
2281 | ||
2282 | func_enter(); | |
2283 | ||
2284 | if (sx_paranoia_check(port, tty->name, "sx_hangup")) { | |
2285 | func_exit(); | |
2286 | return; | |
2287 | } | |
d61780c0 | 2288 | |
1da177e4 | 2289 | bp = port_Board(port); |
d61780c0 | 2290 | |
1da177e4 LT |
2291 | sx_shutdown_port(bp, port); |
2292 | spin_lock_irqsave(&port->lock, flags); | |
2293 | port->event = 0; | |
2294 | bp->count -= port->count; | |
2295 | if (bp->count < 0) { | |
2296 | printk(KERN_ERR "sx%d: sx_hangup: bad board count: %d port: %d\n", | |
2297 | board_No(bp), bp->count, tty->index); | |
2298 | bp->count = 0; | |
2299 | } | |
2300 | port->count = 0; | |
2301 | port->flags &= ~ASYNC_NORMAL_ACTIVE; | |
2302 | port->tty = NULL; | |
2303 | spin_unlock_irqrestore(&port->lock, flags); | |
2304 | wake_up_interruptible(&port->open_wait); | |
2305 | ||
2306 | func_exit(); | |
2307 | } | |
2308 | ||
2309 | ||
606d099c | 2310 | static void sx_set_termios(struct tty_struct * tty, struct ktermios * old_termios) |
1da177e4 LT |
2311 | { |
2312 | struct specialix_port *port = (struct specialix_port *)tty->driver_data; | |
2313 | unsigned long flags; | |
2314 | struct specialix_board * bp; | |
d61780c0 | 2315 | |
1da177e4 LT |
2316 | if (sx_paranoia_check(port, tty->name, "sx_set_termios")) |
2317 | return; | |
d61780c0 | 2318 | |
1da177e4 LT |
2319 | if (tty->termios->c_cflag == old_termios->c_cflag && |
2320 | tty->termios->c_iflag == old_termios->c_iflag) | |
2321 | return; | |
2322 | ||
2323 | bp = port_Board(port); | |
2324 | spin_lock_irqsave(&port->lock, flags); | |
2325 | sx_change_speed(port_Board(port), port); | |
2326 | spin_unlock_irqrestore(&port->lock, flags); | |
2327 | ||
2328 | if ((old_termios->c_cflag & CRTSCTS) && | |
2329 | !(tty->termios->c_cflag & CRTSCTS)) { | |
2330 | tty->hw_stopped = 0; | |
2331 | sx_start(tty); | |
2332 | } | |
2333 | } | |
2334 | ||
2335 | ||
c4028958 | 2336 | static void do_softint(struct work_struct *work) |
1da177e4 | 2337 | { |
c4028958 DH |
2338 | struct specialix_port *port = |
2339 | container_of(work, struct specialix_port, tqueue); | |
1da177e4 LT |
2340 | struct tty_struct *tty; |
2341 | ||
2342 | func_enter(); | |
2343 | ||
2344 | if(!(tty = port->tty)) { | |
2345 | func_exit(); | |
2346 | return; | |
2347 | } | |
2348 | ||
b963a844 | 2349 | if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &port->event)) |
1da177e4 | 2350 | tty_wakeup(tty); |
1da177e4 LT |
2351 | |
2352 | func_exit(); | |
2353 | } | |
2354 | ||
b68e31d0 | 2355 | static const struct tty_operations sx_ops = { |
1da177e4 LT |
2356 | .open = sx_open, |
2357 | .close = sx_close, | |
2358 | .write = sx_write, | |
2359 | .put_char = sx_put_char, | |
2360 | .flush_chars = sx_flush_chars, | |
2361 | .write_room = sx_write_room, | |
2362 | .chars_in_buffer = sx_chars_in_buffer, | |
2363 | .flush_buffer = sx_flush_buffer, | |
2364 | .ioctl = sx_ioctl, | |
2365 | .throttle = sx_throttle, | |
2366 | .unthrottle = sx_unthrottle, | |
2367 | .set_termios = sx_set_termios, | |
2368 | .stop = sx_stop, | |
2369 | .start = sx_start, | |
2370 | .hangup = sx_hangup, | |
2371 | .tiocmget = sx_tiocmget, | |
2372 | .tiocmset = sx_tiocmset, | |
2373 | }; | |
2374 | ||
2375 | static int sx_init_drivers(void) | |
2376 | { | |
2377 | int error; | |
2378 | int i; | |
2379 | ||
2380 | func_enter(); | |
2381 | ||
2382 | specialix_driver = alloc_tty_driver(SX_NBOARD * SX_NPORT); | |
2383 | if (!specialix_driver) { | |
2384 | printk(KERN_ERR "sx: Couldn't allocate tty_driver.\n"); | |
2385 | func_exit(); | |
2386 | return 1; | |
2387 | } | |
d61780c0 | 2388 | |
1da177e4 LT |
2389 | specialix_driver->owner = THIS_MODULE; |
2390 | specialix_driver->name = "ttyW"; | |
2391 | specialix_driver->major = SPECIALIX_NORMAL_MAJOR; | |
2392 | specialix_driver->type = TTY_DRIVER_TYPE_SERIAL; | |
2393 | specialix_driver->subtype = SERIAL_TYPE_NORMAL; | |
2394 | specialix_driver->init_termios = tty_std_termios; | |
2395 | specialix_driver->init_termios.c_cflag = | |
2396 | B9600 | CS8 | CREAD | HUPCL | CLOCAL; | |
606d099c AC |
2397 | specialix_driver->init_termios.c_ispeed = 9600; |
2398 | specialix_driver->init_termios.c_ospeed = 9600; | |
1da177e4 LT |
2399 | specialix_driver->flags = TTY_DRIVER_REAL_RAW; |
2400 | tty_set_operations(specialix_driver, &sx_ops); | |
2401 | ||
2402 | if ((error = tty_register_driver(specialix_driver))) { | |
2403 | put_tty_driver(specialix_driver); | |
1da177e4 LT |
2404 | printk(KERN_ERR "sx: Couldn't register specialix IO8+ driver, error = %d\n", |
2405 | error); | |
2406 | func_exit(); | |
2407 | return 1; | |
2408 | } | |
2409 | memset(sx_port, 0, sizeof(sx_port)); | |
2410 | for (i = 0; i < SX_NPORT * SX_NBOARD; i++) { | |
2411 | sx_port[i].magic = SPECIALIX_MAGIC; | |
c4028958 DH |
2412 | INIT_WORK(&sx_port[i].tqueue, do_softint); |
2413 | INIT_WORK(&sx_port[i].tqueue_hangup, do_sx_hangup); | |
1da177e4 LT |
2414 | sx_port[i].close_delay = 50 * HZ/100; |
2415 | sx_port[i].closing_wait = 3000 * HZ/100; | |
2416 | init_waitqueue_head(&sx_port[i].open_wait); | |
2417 | init_waitqueue_head(&sx_port[i].close_wait); | |
2418 | spin_lock_init(&sx_port[i].lock); | |
2419 | } | |
d61780c0 | 2420 | |
1da177e4 LT |
2421 | func_exit(); |
2422 | return 0; | |
2423 | } | |
2424 | ||
2425 | static void sx_release_drivers(void) | |
2426 | { | |
2427 | func_enter(); | |
2428 | ||
1da177e4 LT |
2429 | tty_unregister_driver(specialix_driver); |
2430 | put_tty_driver(specialix_driver); | |
2431 | func_exit(); | |
2432 | } | |
2433 | ||
d61780c0 JG |
2434 | /* |
2435 | * This routine must be called by kernel at boot time | |
1da177e4 LT |
2436 | */ |
2437 | static int __init specialix_init(void) | |
2438 | { | |
2439 | int i; | |
2440 | int found = 0; | |
2441 | ||
2442 | func_enter(); | |
2443 | ||
2444 | printk(KERN_INFO "sx: Specialix IO8+ driver v" VERSION ", (c) R.E.Wolff 1997/1998.\n"); | |
2445 | printk(KERN_INFO "sx: derived from work (c) D.Gorodchanin 1994-1996.\n"); | |
2446 | #ifdef CONFIG_SPECIALIX_RTSCTS | |
2447 | printk (KERN_INFO "sx: DTR/RTS pin is always RTS.\n"); | |
2448 | #else | |
2449 | printk (KERN_INFO "sx: DTR/RTS pin is RTS when CRTSCTS is on.\n"); | |
2450 | #endif | |
d61780c0 | 2451 | |
1da177e4 | 2452 | for (i = 0; i < SX_NBOARD; i++) |
34af946a | 2453 | spin_lock_init(&sx_board[i].lock); |
1da177e4 LT |
2454 | |
2455 | if (sx_init_drivers()) { | |
2456 | func_exit(); | |
2457 | return -EIO; | |
2458 | } | |
2459 | ||
d61780c0 | 2460 | for (i = 0; i < SX_NBOARD; i++) |
1da177e4 LT |
2461 | if (sx_board[i].base && !sx_probe(&sx_board[i])) |
2462 | found++; | |
2463 | ||
2464 | #ifdef CONFIG_PCI | |
2465 | { | |
2466 | struct pci_dev *pdev = NULL; | |
2467 | ||
2468 | i=0; | |
2469 | while (i < SX_NBOARD) { | |
2470 | if (sx_board[i].flags & SX_BOARD_PRESENT) { | |
2471 | i++; | |
2472 | continue; | |
2473 | } | |
606d099c | 2474 | pdev = pci_get_device (PCI_VENDOR_ID_SPECIALIX, |
d61780c0 | 2475 | PCI_DEVICE_ID_SPECIALIX_IO8, |
1da177e4 LT |
2476 | pdev); |
2477 | if (!pdev) break; | |
2478 | ||
2479 | if (pci_enable_device(pdev)) | |
2480 | continue; | |
2481 | ||
2482 | sx_board[i].irq = pdev->irq; | |
2483 | ||
2484 | sx_board[i].base = pci_resource_start (pdev, 2); | |
2485 | ||
2486 | sx_board[i].flags |= SX_BOARD_IS_PCI; | |
2487 | if (!sx_probe(&sx_board[i])) | |
2488 | found ++; | |
2489 | } | |
606d099c AC |
2490 | /* May exit pci_get sequence early with lots of boards */ |
2491 | if (pdev != NULL) | |
2492 | pci_dev_put(pdev); | |
1da177e4 LT |
2493 | } |
2494 | #endif | |
2495 | ||
2496 | if (!found) { | |
2497 | sx_release_drivers(); | |
2498 | printk(KERN_INFO "sx: No specialix IO8+ boards detected.\n"); | |
2499 | func_exit(); | |
2500 | return -EIO; | |
2501 | } | |
2502 | ||
2503 | func_exit(); | |
2504 | return 0; | |
2505 | } | |
2506 | ||
2507 | static int iobase[SX_NBOARD] = {0,}; | |
2508 | ||
2509 | static int irq [SX_NBOARD] = {0,}; | |
2510 | ||
2511 | module_param_array(iobase, int, NULL, 0); | |
2512 | module_param_array(irq, int, NULL, 0); | |
2513 | module_param(sx_debug, int, 0); | |
2514 | module_param(sx_rxfifo, int, 0); | |
2515 | #ifdef SPECIALIX_TIMER | |
2516 | module_param(sx_poll, int, 0); | |
2517 | #endif | |
2518 | ||
2519 | /* | |
2520 | * You can setup up to 4 boards. | |
2521 | * by specifying "iobase=0xXXX,0xXXX ..." as insmod parameter. | |
d61780c0 JG |
2522 | * You should specify the IRQs too in that case "irq=....,...". |
2523 | * | |
1da177e4 | 2524 | * More than 4 boards in one computer is not possible, as the card can |
d61780c0 | 2525 | * only use 4 different interrupts. |
1da177e4 LT |
2526 | * |
2527 | */ | |
2528 | static int __init specialix_init_module(void) | |
2529 | { | |
2530 | int i; | |
2531 | ||
2532 | func_enter(); | |
2533 | ||
1da177e4 LT |
2534 | if (iobase[0] || iobase[1] || iobase[2] || iobase[3]) { |
2535 | for(i = 0; i < SX_NBOARD; i++) { | |
2536 | sx_board[i].base = iobase[i]; | |
2537 | sx_board[i].irq = irq[i]; | |
2538 | sx_board[i].count= 0; | |
2539 | } | |
2540 | } | |
2541 | ||
2542 | func_exit(); | |
2543 | ||
2544 | return specialix_init(); | |
2545 | } | |
d61780c0 | 2546 | |
1da177e4 LT |
2547 | static void __exit specialix_exit_module(void) |
2548 | { | |
2549 | int i; | |
d61780c0 | 2550 | |
1da177e4 LT |
2551 | func_enter(); |
2552 | ||
2553 | sx_release_drivers(); | |
2554 | for (i = 0; i < SX_NBOARD; i++) | |
d61780c0 | 2555 | if (sx_board[i].flags & SX_BOARD_PRESENT) |
1da177e4 LT |
2556 | sx_release_io_range(&sx_board[i]); |
2557 | #ifdef SPECIALIX_TIMER | |
40565f19 | 2558 | del_timer_sync(&missed_irq_timer); |
1da177e4 LT |
2559 | #endif |
2560 | ||
2561 | func_exit(); | |
2562 | } | |
2563 | ||
7691030b CS |
2564 | static struct pci_device_id specialx_pci_tbl[] __devinitdata = { |
2565 | { PCI_DEVICE(PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_IO8) }, | |
2566 | { } | |
2567 | }; | |
2568 | MODULE_DEVICE_TABLE(pci, specialx_pci_tbl); | |
2569 | ||
1da177e4 LT |
2570 | module_init(specialix_init_module); |
2571 | module_exit(specialix_exit_module); | |
2572 | ||
2573 | MODULE_LICENSE("GPL"); |