]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /*****************************************************************************/ |
2 | ||
3 | /* | |
4 | * stallion.c -- stallion multiport serial driver. | |
5 | * | |
6 | * Copyright (C) 1996-1999 Stallion Technologies | |
7 | * Copyright (C) 1994-1996 Greg Ungerer. | |
8 | * | |
9 | * This code is loosely based on the Linux serial driver, written by | |
10 | * Linus Torvalds, Theodore T'so and others. | |
11 | * | |
12 | * This program is free software; you can redistribute it and/or modify | |
13 | * it under the terms of the GNU General Public License as published by | |
14 | * the Free Software Foundation; either version 2 of the License, or | |
15 | * (at your option) any later version. | |
16 | * | |
17 | * This program is distributed in the hope that it will be useful, | |
18 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
19 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
20 | * GNU General Public License for more details. | |
21 | * | |
22 | * You should have received a copy of the GNU General Public License | |
23 | * along with this program; if not, write to the Free Software | |
24 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
25 | */ | |
26 | ||
27 | /*****************************************************************************/ | |
28 | ||
29 | #include <linux/config.h> | |
30 | #include <linux/module.h> | |
31 | #include <linux/slab.h> | |
32 | #include <linux/interrupt.h> | |
33 | #include <linux/tty.h> | |
34 | #include <linux/tty_flip.h> | |
35 | #include <linux/serial.h> | |
36 | #include <linux/cd1400.h> | |
37 | #include <linux/sc26198.h> | |
38 | #include <linux/comstats.h> | |
39 | #include <linux/stallion.h> | |
40 | #include <linux/ioport.h> | |
41 | #include <linux/init.h> | |
42 | #include <linux/smp_lock.h> | |
43 | #include <linux/devfs_fs_kernel.h> | |
44 | #include <linux/device.h> | |
45 | #include <linux/delay.h> | |
46 | ||
47 | #include <asm/io.h> | |
48 | #include <asm/uaccess.h> | |
49 | ||
50 | #ifdef CONFIG_PCI | |
51 | #include <linux/pci.h> | |
52 | #endif | |
53 | ||
54 | /*****************************************************************************/ | |
55 | ||
56 | /* | |
57 | * Define different board types. Use the standard Stallion "assigned" | |
58 | * board numbers. Boards supported in this driver are abbreviated as | |
59 | * EIO = EasyIO and ECH = EasyConnection 8/32. | |
60 | */ | |
61 | #define BRD_EASYIO 20 | |
62 | #define BRD_ECH 21 | |
63 | #define BRD_ECHMC 22 | |
64 | #define BRD_ECHPCI 26 | |
65 | #define BRD_ECH64PCI 27 | |
66 | #define BRD_EASYIOPCI 28 | |
67 | ||
68 | /* | |
69 | * Define a configuration structure to hold the board configuration. | |
70 | * Need to set this up in the code (for now) with the boards that are | |
71 | * to be configured into the system. This is what needs to be modified | |
72 | * when adding/removing/modifying boards. Each line entry in the | |
73 | * stl_brdconf[] array is a board. Each line contains io/irq/memory | |
74 | * ranges for that board (as well as what type of board it is). | |
75 | * Some examples: | |
76 | * { BRD_EASYIO, 0x2a0, 0, 0, 10, 0 }, | |
77 | * This line would configure an EasyIO board (4 or 8, no difference), | |
78 | * at io address 2a0 and irq 10. | |
79 | * Another example: | |
80 | * { BRD_ECH, 0x2a8, 0x280, 0, 12, 0 }, | |
81 | * This line will configure an EasyConnection 8/32 board at primary io | |
82 | * address 2a8, secondary io address 280 and irq 12. | |
83 | * Enter as many lines into this array as you want (only the first 4 | |
84 | * will actually be used!). Any combination of EasyIO and EasyConnection | |
85 | * boards can be specified. EasyConnection 8/32 boards can share their | |
86 | * secondary io addresses between each other. | |
87 | * | |
88 | * NOTE: there is no need to put any entries in this table for PCI | |
89 | * boards. They will be found automatically by the driver - provided | |
90 | * PCI BIOS32 support is compiled into the kernel. | |
91 | */ | |
92 | ||
93 | typedef struct { | |
94 | int brdtype; | |
95 | int ioaddr1; | |
96 | int ioaddr2; | |
97 | unsigned long memaddr; | |
98 | int irq; | |
99 | int irqtype; | |
100 | } stlconf_t; | |
101 | ||
102 | static stlconf_t stl_brdconf[] = { | |
103 | /*{ BRD_EASYIO, 0x2a0, 0, 0, 10, 0 },*/ | |
104 | }; | |
105 | ||
fe971071 | 106 | static int stl_nrbrds = ARRAY_SIZE(stl_brdconf); |
1da177e4 LT |
107 | |
108 | /*****************************************************************************/ | |
109 | ||
110 | /* | |
111 | * Define some important driver characteristics. Device major numbers | |
112 | * allocated as per Linux Device Registry. | |
113 | */ | |
114 | #ifndef STL_SIOMEMMAJOR | |
115 | #define STL_SIOMEMMAJOR 28 | |
116 | #endif | |
117 | #ifndef STL_SERIALMAJOR | |
118 | #define STL_SERIALMAJOR 24 | |
119 | #endif | |
120 | #ifndef STL_CALLOUTMAJOR | |
121 | #define STL_CALLOUTMAJOR 25 | |
122 | #endif | |
123 | ||
124 | /* | |
125 | * Set the TX buffer size. Bigger is better, but we don't want | |
126 | * to chew too much memory with buffers! | |
127 | */ | |
128 | #define STL_TXBUFLOW 512 | |
129 | #define STL_TXBUFSIZE 4096 | |
130 | ||
131 | /*****************************************************************************/ | |
132 | ||
133 | /* | |
134 | * Define our local driver identity first. Set up stuff to deal with | |
135 | * all the local structures required by a serial tty driver. | |
136 | */ | |
137 | static char *stl_drvtitle = "Stallion Multiport Serial Driver"; | |
138 | static char *stl_drvname = "stallion"; | |
139 | static char *stl_drvversion = "5.6.0"; | |
140 | ||
141 | static struct tty_driver *stl_serial; | |
142 | ||
143 | /* | |
144 | * We will need to allocate a temporary write buffer for chars that | |
145 | * come direct from user space. The problem is that a copy from user | |
146 | * space might cause a page fault (typically on a system that is | |
147 | * swapping!). All ports will share one buffer - since if the system | |
148 | * is already swapping a shared buffer won't make things any worse. | |
149 | */ | |
150 | static char *stl_tmpwritebuf; | |
1da177e4 LT |
151 | |
152 | /* | |
153 | * Define a local default termios struct. All ports will be created | |
154 | * with this termios initially. Basically all it defines is a raw port | |
155 | * at 9600, 8 data bits, 1 stop bit. | |
156 | */ | |
157 | static struct termios stl_deftermios = { | |
158 | .c_cflag = (B9600 | CS8 | CREAD | HUPCL | CLOCAL), | |
159 | .c_cc = INIT_C_CC, | |
160 | }; | |
161 | ||
162 | /* | |
163 | * Define global stats structures. Not used often, and can be | |
164 | * re-used for each stats call. | |
165 | */ | |
166 | static comstats_t stl_comstats; | |
167 | static combrd_t stl_brdstats; | |
168 | static stlbrd_t stl_dummybrd; | |
169 | static stlport_t stl_dummyport; | |
170 | ||
171 | /* | |
172 | * Define global place to put buffer overflow characters. | |
173 | */ | |
174 | static char stl_unwanted[SC26198_RXFIFOSIZE]; | |
175 | ||
176 | /*****************************************************************************/ | |
177 | ||
178 | static stlbrd_t *stl_brds[STL_MAXBRDS]; | |
179 | ||
180 | /* | |
181 | * Per board state flags. Used with the state field of the board struct. | |
182 | * Not really much here! | |
183 | */ | |
184 | #define BRD_FOUND 0x1 | |
185 | ||
186 | /* | |
187 | * Define the port structure istate flags. These set of flags are | |
188 | * modified at interrupt time - so setting and reseting them needs | |
189 | * to be atomic. Use the bit clear/setting routines for this. | |
190 | */ | |
191 | #define ASYI_TXBUSY 1 | |
192 | #define ASYI_TXLOW 2 | |
193 | #define ASYI_DCDCHANGE 3 | |
194 | #define ASYI_TXFLOWED 4 | |
195 | ||
196 | /* | |
197 | * Define an array of board names as printable strings. Handy for | |
198 | * referencing boards when printing trace and stuff. | |
199 | */ | |
200 | static char *stl_brdnames[] = { | |
201 | (char *) NULL, | |
202 | (char *) NULL, | |
203 | (char *) NULL, | |
204 | (char *) NULL, | |
205 | (char *) NULL, | |
206 | (char *) NULL, | |
207 | (char *) NULL, | |
208 | (char *) NULL, | |
209 | (char *) NULL, | |
210 | (char *) NULL, | |
211 | (char *) NULL, | |
212 | (char *) NULL, | |
213 | (char *) NULL, | |
214 | (char *) NULL, | |
215 | (char *) NULL, | |
216 | (char *) NULL, | |
217 | (char *) NULL, | |
218 | (char *) NULL, | |
219 | (char *) NULL, | |
220 | (char *) NULL, | |
221 | "EasyIO", | |
222 | "EC8/32-AT", | |
223 | "EC8/32-MC", | |
224 | (char *) NULL, | |
225 | (char *) NULL, | |
226 | (char *) NULL, | |
227 | "EC8/32-PCI", | |
228 | "EC8/64-PCI", | |
229 | "EasyIO-PCI", | |
230 | }; | |
231 | ||
232 | /*****************************************************************************/ | |
233 | ||
234 | /* | |
235 | * Define some string labels for arguments passed from the module | |
236 | * load line. These allow for easy board definitions, and easy | |
237 | * modification of the io, memory and irq resoucres. | |
238 | */ | |
239 | static int stl_nargs = 0; | |
240 | static char *board0[4]; | |
241 | static char *board1[4]; | |
242 | static char *board2[4]; | |
243 | static char *board3[4]; | |
244 | ||
245 | static char **stl_brdsp[] = { | |
246 | (char **) &board0, | |
247 | (char **) &board1, | |
248 | (char **) &board2, | |
249 | (char **) &board3 | |
250 | }; | |
251 | ||
252 | /* | |
253 | * Define a set of common board names, and types. This is used to | |
254 | * parse any module arguments. | |
255 | */ | |
256 | ||
257 | typedef struct stlbrdtype { | |
258 | char *name; | |
259 | int type; | |
260 | } stlbrdtype_t; | |
261 | ||
262 | static stlbrdtype_t stl_brdstr[] = { | |
263 | { "easyio", BRD_EASYIO }, | |
264 | { "eio", BRD_EASYIO }, | |
265 | { "20", BRD_EASYIO }, | |
266 | { "ec8/32", BRD_ECH }, | |
267 | { "ec8/32-at", BRD_ECH }, | |
268 | { "ec8/32-isa", BRD_ECH }, | |
269 | { "ech", BRD_ECH }, | |
270 | { "echat", BRD_ECH }, | |
271 | { "21", BRD_ECH }, | |
272 | { "ec8/32-mc", BRD_ECHMC }, | |
273 | { "ec8/32-mca", BRD_ECHMC }, | |
274 | { "echmc", BRD_ECHMC }, | |
275 | { "echmca", BRD_ECHMC }, | |
276 | { "22", BRD_ECHMC }, | |
277 | { "ec8/32-pc", BRD_ECHPCI }, | |
278 | { "ec8/32-pci", BRD_ECHPCI }, | |
279 | { "26", BRD_ECHPCI }, | |
280 | { "ec8/64-pc", BRD_ECH64PCI }, | |
281 | { "ec8/64-pci", BRD_ECH64PCI }, | |
282 | { "ech-pci", BRD_ECH64PCI }, | |
283 | { "echpci", BRD_ECH64PCI }, | |
284 | { "echpc", BRD_ECH64PCI }, | |
285 | { "27", BRD_ECH64PCI }, | |
286 | { "easyio-pc", BRD_EASYIOPCI }, | |
287 | { "easyio-pci", BRD_EASYIOPCI }, | |
288 | { "eio-pci", BRD_EASYIOPCI }, | |
289 | { "eiopci", BRD_EASYIOPCI }, | |
290 | { "28", BRD_EASYIOPCI }, | |
291 | }; | |
292 | ||
293 | /* | |
294 | * Define the module agruments. | |
295 | */ | |
296 | MODULE_AUTHOR("Greg Ungerer"); | |
297 | MODULE_DESCRIPTION("Stallion Multiport Serial Driver"); | |
298 | MODULE_LICENSE("GPL"); | |
299 | ||
300 | module_param_array(board0, charp, &stl_nargs, 0); | |
301 | MODULE_PARM_DESC(board0, "Board 0 config -> name[,ioaddr[,ioaddr2][,irq]]"); | |
302 | module_param_array(board1, charp, &stl_nargs, 0); | |
303 | MODULE_PARM_DESC(board1, "Board 1 config -> name[,ioaddr[,ioaddr2][,irq]]"); | |
304 | module_param_array(board2, charp, &stl_nargs, 0); | |
305 | MODULE_PARM_DESC(board2, "Board 2 config -> name[,ioaddr[,ioaddr2][,irq]]"); | |
306 | module_param_array(board3, charp, &stl_nargs, 0); | |
307 | MODULE_PARM_DESC(board3, "Board 3 config -> name[,ioaddr[,ioaddr2][,irq]]"); | |
308 | ||
309 | /*****************************************************************************/ | |
310 | ||
311 | /* | |
312 | * Hardware ID bits for the EasyIO and ECH boards. These defines apply | |
313 | * to the directly accessible io ports of these boards (not the uarts - | |
314 | * they are in cd1400.h and sc26198.h). | |
315 | */ | |
316 | #define EIO_8PORTRS 0x04 | |
317 | #define EIO_4PORTRS 0x05 | |
318 | #define EIO_8PORTDI 0x00 | |
319 | #define EIO_8PORTM 0x06 | |
320 | #define EIO_MK3 0x03 | |
321 | #define EIO_IDBITMASK 0x07 | |
322 | ||
323 | #define EIO_BRDMASK 0xf0 | |
324 | #define ID_BRD4 0x10 | |
325 | #define ID_BRD8 0x20 | |
326 | #define ID_BRD16 0x30 | |
327 | ||
328 | #define EIO_INTRPEND 0x08 | |
329 | #define EIO_INTEDGE 0x00 | |
330 | #define EIO_INTLEVEL 0x08 | |
331 | #define EIO_0WS 0x10 | |
332 | ||
333 | #define ECH_ID 0xa0 | |
334 | #define ECH_IDBITMASK 0xe0 | |
335 | #define ECH_BRDENABLE 0x08 | |
336 | #define ECH_BRDDISABLE 0x00 | |
337 | #define ECH_INTENABLE 0x01 | |
338 | #define ECH_INTDISABLE 0x00 | |
339 | #define ECH_INTLEVEL 0x02 | |
340 | #define ECH_INTEDGE 0x00 | |
341 | #define ECH_INTRPEND 0x01 | |
342 | #define ECH_BRDRESET 0x01 | |
343 | ||
344 | #define ECHMC_INTENABLE 0x01 | |
345 | #define ECHMC_BRDRESET 0x02 | |
346 | ||
347 | #define ECH_PNLSTATUS 2 | |
348 | #define ECH_PNL16PORT 0x20 | |
349 | #define ECH_PNLIDMASK 0x07 | |
350 | #define ECH_PNLXPID 0x40 | |
351 | #define ECH_PNLINTRPEND 0x80 | |
352 | ||
353 | #define ECH_ADDR2MASK 0x1e0 | |
354 | ||
355 | /* | |
356 | * Define the vector mapping bits for the programmable interrupt board | |
357 | * hardware. These bits encode the interrupt for the board to use - it | |
358 | * is software selectable (except the EIO-8M). | |
359 | */ | |
360 | static unsigned char stl_vecmap[] = { | |
361 | 0xff, 0xff, 0xff, 0x04, 0x06, 0x05, 0xff, 0x07, | |
362 | 0xff, 0xff, 0x00, 0x02, 0x01, 0xff, 0xff, 0x03 | |
363 | }; | |
364 | ||
365 | /* | |
366 | * Set up enable and disable macros for the ECH boards. They require | |
367 | * the secondary io address space to be activated and deactivated. | |
368 | * This way all ECH boards can share their secondary io region. | |
369 | * If this is an ECH-PCI board then also need to set the page pointer | |
370 | * to point to the correct page. | |
371 | */ | |
372 | #define BRDENABLE(brdnr,pagenr) \ | |
373 | if (stl_brds[(brdnr)]->brdtype == BRD_ECH) \ | |
374 | outb((stl_brds[(brdnr)]->ioctrlval | ECH_BRDENABLE), \ | |
375 | stl_brds[(brdnr)]->ioctrl); \ | |
376 | else if (stl_brds[(brdnr)]->brdtype == BRD_ECHPCI) \ | |
377 | outb((pagenr), stl_brds[(brdnr)]->ioctrl); | |
378 | ||
379 | #define BRDDISABLE(brdnr) \ | |
380 | if (stl_brds[(brdnr)]->brdtype == BRD_ECH) \ | |
381 | outb((stl_brds[(brdnr)]->ioctrlval | ECH_BRDDISABLE), \ | |
382 | stl_brds[(brdnr)]->ioctrl); | |
383 | ||
384 | #define STL_CD1400MAXBAUD 230400 | |
385 | #define STL_SC26198MAXBAUD 460800 | |
386 | ||
387 | #define STL_BAUDBASE 115200 | |
388 | #define STL_CLOSEDELAY (5 * HZ / 10) | |
389 | ||
390 | /*****************************************************************************/ | |
391 | ||
392 | #ifdef CONFIG_PCI | |
393 | ||
394 | /* | |
395 | * Define the Stallion PCI vendor and device IDs. | |
396 | */ | |
397 | #ifndef PCI_VENDOR_ID_STALLION | |
398 | #define PCI_VENDOR_ID_STALLION 0x124d | |
399 | #endif | |
400 | #ifndef PCI_DEVICE_ID_ECHPCI832 | |
401 | #define PCI_DEVICE_ID_ECHPCI832 0x0000 | |
402 | #endif | |
403 | #ifndef PCI_DEVICE_ID_ECHPCI864 | |
404 | #define PCI_DEVICE_ID_ECHPCI864 0x0002 | |
405 | #endif | |
406 | #ifndef PCI_DEVICE_ID_EIOPCI | |
407 | #define PCI_DEVICE_ID_EIOPCI 0x0003 | |
408 | #endif | |
409 | ||
410 | /* | |
411 | * Define structure to hold all Stallion PCI boards. | |
412 | */ | |
413 | typedef struct stlpcibrd { | |
414 | unsigned short vendid; | |
415 | unsigned short devid; | |
416 | int brdtype; | |
417 | } stlpcibrd_t; | |
418 | ||
419 | static stlpcibrd_t stl_pcibrds[] = { | |
420 | { PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECHPCI864, BRD_ECH64PCI }, | |
421 | { PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_EIOPCI, BRD_EASYIOPCI }, | |
422 | { PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECHPCI832, BRD_ECHPCI }, | |
423 | { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87410, BRD_ECHPCI }, | |
424 | }; | |
425 | ||
fe971071 | 426 | static int stl_nrpcibrds = ARRAY_SIZE(stl_pcibrds); |
1da177e4 LT |
427 | |
428 | #endif | |
429 | ||
430 | /*****************************************************************************/ | |
431 | ||
432 | /* | |
433 | * Define macros to extract a brd/port number from a minor number. | |
434 | */ | |
435 | #define MINOR2BRD(min) (((min) & 0xc0) >> 6) | |
436 | #define MINOR2PORT(min) ((min) & 0x3f) | |
437 | ||
438 | /* | |
439 | * Define a baud rate table that converts termios baud rate selector | |
440 | * into the actual baud rate value. All baud rate calculations are | |
441 | * based on the actual baud rate required. | |
442 | */ | |
443 | static unsigned int stl_baudrates[] = { | |
444 | 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, | |
445 | 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 | |
446 | }; | |
447 | ||
448 | /* | |
449 | * Define some handy local macros... | |
450 | */ | |
451 | #undef MIN | |
452 | #define MIN(a,b) (((a) <= (b)) ? (a) : (b)) | |
453 | ||
454 | #undef TOLOWER | |
455 | #define TOLOWER(x) ((((x) >= 'A') && ((x) <= 'Z')) ? ((x) + 0x20) : (x)) | |
456 | ||
457 | /*****************************************************************************/ | |
458 | ||
459 | /* | |
460 | * Declare all those functions in this driver! | |
461 | */ | |
462 | ||
463 | static void stl_argbrds(void); | |
464 | static int stl_parsebrd(stlconf_t *confp, char **argp); | |
465 | ||
466 | static unsigned long stl_atol(char *str); | |
467 | ||
408b664a | 468 | static int stl_init(void); |
1da177e4 LT |
469 | static int stl_open(struct tty_struct *tty, struct file *filp); |
470 | static void stl_close(struct tty_struct *tty, struct file *filp); | |
471 | static int stl_write(struct tty_struct *tty, const unsigned char *buf, int count); | |
472 | static void stl_putchar(struct tty_struct *tty, unsigned char ch); | |
473 | static void stl_flushchars(struct tty_struct *tty); | |
474 | static int stl_writeroom(struct tty_struct *tty); | |
475 | static int stl_charsinbuffer(struct tty_struct *tty); | |
476 | static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); | |
477 | static void stl_settermios(struct tty_struct *tty, struct termios *old); | |
478 | static void stl_throttle(struct tty_struct *tty); | |
479 | static void stl_unthrottle(struct tty_struct *tty); | |
480 | static void stl_stop(struct tty_struct *tty); | |
481 | static void stl_start(struct tty_struct *tty); | |
482 | static void stl_flushbuffer(struct tty_struct *tty); | |
483 | static void stl_breakctl(struct tty_struct *tty, int state); | |
484 | static void stl_waituntilsent(struct tty_struct *tty, int timeout); | |
485 | static void stl_sendxchar(struct tty_struct *tty, char ch); | |
486 | static void stl_hangup(struct tty_struct *tty); | |
487 | static int stl_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg); | |
488 | static int stl_portinfo(stlport_t *portp, int portnr, char *pos); | |
489 | static int stl_readproc(char *page, char **start, off_t off, int count, int *eof, void *data); | |
490 | ||
491 | static int stl_brdinit(stlbrd_t *brdp); | |
492 | static int stl_initports(stlbrd_t *brdp, stlpanel_t *panelp); | |
493 | static int stl_getserial(stlport_t *portp, struct serial_struct __user *sp); | |
494 | static int stl_setserial(stlport_t *portp, struct serial_struct __user *sp); | |
495 | static int stl_getbrdstats(combrd_t __user *bp); | |
496 | static int stl_getportstats(stlport_t *portp, comstats_t __user *cp); | |
497 | static int stl_clrportstats(stlport_t *portp, comstats_t __user *cp); | |
498 | static int stl_getportstruct(stlport_t __user *arg); | |
499 | static int stl_getbrdstruct(stlbrd_t __user *arg); | |
500 | static int stl_waitcarrier(stlport_t *portp, struct file *filp); | |
501 | static int stl_eiointr(stlbrd_t *brdp); | |
502 | static int stl_echatintr(stlbrd_t *brdp); | |
503 | static int stl_echmcaintr(stlbrd_t *brdp); | |
504 | static int stl_echpciintr(stlbrd_t *brdp); | |
505 | static int stl_echpci64intr(stlbrd_t *brdp); | |
506 | static void stl_offintr(void *private); | |
1da177e4 LT |
507 | static stlbrd_t *stl_allocbrd(void); |
508 | static stlport_t *stl_getport(int brdnr, int panelnr, int portnr); | |
509 | ||
510 | static inline int stl_initbrds(void); | |
511 | static inline int stl_initeio(stlbrd_t *brdp); | |
512 | static inline int stl_initech(stlbrd_t *brdp); | |
513 | static inline int stl_getbrdnr(void); | |
514 | ||
515 | #ifdef CONFIG_PCI | |
516 | static inline int stl_findpcibrds(void); | |
517 | static inline int stl_initpcibrd(int brdtype, struct pci_dev *devp); | |
518 | #endif | |
519 | ||
520 | /* | |
521 | * CD1400 uart specific handling functions. | |
522 | */ | |
523 | static void stl_cd1400setreg(stlport_t *portp, int regnr, int value); | |
524 | static int stl_cd1400getreg(stlport_t *portp, int regnr); | |
525 | static int stl_cd1400updatereg(stlport_t *portp, int regnr, int value); | |
526 | static int stl_cd1400panelinit(stlbrd_t *brdp, stlpanel_t *panelp); | |
527 | static void stl_cd1400portinit(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *portp); | |
528 | static void stl_cd1400setport(stlport_t *portp, struct termios *tiosp); | |
529 | static int stl_cd1400getsignals(stlport_t *portp); | |
530 | static void stl_cd1400setsignals(stlport_t *portp, int dtr, int rts); | |
531 | static void stl_cd1400ccrwait(stlport_t *portp); | |
532 | static void stl_cd1400enablerxtx(stlport_t *portp, int rx, int tx); | |
533 | static void stl_cd1400startrxtx(stlport_t *portp, int rx, int tx); | |
534 | static void stl_cd1400disableintrs(stlport_t *portp); | |
535 | static void stl_cd1400sendbreak(stlport_t *portp, int len); | |
536 | static void stl_cd1400flowctrl(stlport_t *portp, int state); | |
537 | static void stl_cd1400sendflow(stlport_t *portp, int state); | |
538 | static void stl_cd1400flush(stlport_t *portp); | |
539 | static int stl_cd1400datastate(stlport_t *portp); | |
540 | static void stl_cd1400eiointr(stlpanel_t *panelp, unsigned int iobase); | |
541 | static void stl_cd1400echintr(stlpanel_t *panelp, unsigned int iobase); | |
542 | static void stl_cd1400txisr(stlpanel_t *panelp, int ioaddr); | |
543 | static void stl_cd1400rxisr(stlpanel_t *panelp, int ioaddr); | |
544 | static void stl_cd1400mdmisr(stlpanel_t *panelp, int ioaddr); | |
545 | ||
546 | static inline int stl_cd1400breakisr(stlport_t *portp, int ioaddr); | |
547 | ||
548 | /* | |
549 | * SC26198 uart specific handling functions. | |
550 | */ | |
551 | static void stl_sc26198setreg(stlport_t *portp, int regnr, int value); | |
552 | static int stl_sc26198getreg(stlport_t *portp, int regnr); | |
553 | static int stl_sc26198updatereg(stlport_t *portp, int regnr, int value); | |
554 | static int stl_sc26198getglobreg(stlport_t *portp, int regnr); | |
555 | static int stl_sc26198panelinit(stlbrd_t *brdp, stlpanel_t *panelp); | |
556 | static void stl_sc26198portinit(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *portp); | |
557 | static void stl_sc26198setport(stlport_t *portp, struct termios *tiosp); | |
558 | static int stl_sc26198getsignals(stlport_t *portp); | |
559 | static void stl_sc26198setsignals(stlport_t *portp, int dtr, int rts); | |
560 | static void stl_sc26198enablerxtx(stlport_t *portp, int rx, int tx); | |
561 | static void stl_sc26198startrxtx(stlport_t *portp, int rx, int tx); | |
562 | static void stl_sc26198disableintrs(stlport_t *portp); | |
563 | static void stl_sc26198sendbreak(stlport_t *portp, int len); | |
564 | static void stl_sc26198flowctrl(stlport_t *portp, int state); | |
565 | static void stl_sc26198sendflow(stlport_t *portp, int state); | |
566 | static void stl_sc26198flush(stlport_t *portp); | |
567 | static int stl_sc26198datastate(stlport_t *portp); | |
568 | static void stl_sc26198wait(stlport_t *portp); | |
569 | static void stl_sc26198txunflow(stlport_t *portp, struct tty_struct *tty); | |
570 | static void stl_sc26198intr(stlpanel_t *panelp, unsigned int iobase); | |
571 | static void stl_sc26198txisr(stlport_t *port); | |
572 | static void stl_sc26198rxisr(stlport_t *port, unsigned int iack); | |
573 | static void stl_sc26198rxbadch(stlport_t *portp, unsigned char status, char ch); | |
574 | static void stl_sc26198rxbadchars(stlport_t *portp); | |
575 | static void stl_sc26198otherisr(stlport_t *port, unsigned int iack); | |
576 | ||
577 | /*****************************************************************************/ | |
578 | ||
579 | /* | |
580 | * Generic UART support structure. | |
581 | */ | |
582 | typedef struct uart { | |
583 | int (*panelinit)(stlbrd_t *brdp, stlpanel_t *panelp); | |
584 | void (*portinit)(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *portp); | |
585 | void (*setport)(stlport_t *portp, struct termios *tiosp); | |
586 | int (*getsignals)(stlport_t *portp); | |
587 | void (*setsignals)(stlport_t *portp, int dtr, int rts); | |
588 | void (*enablerxtx)(stlport_t *portp, int rx, int tx); | |
589 | void (*startrxtx)(stlport_t *portp, int rx, int tx); | |
590 | void (*disableintrs)(stlport_t *portp); | |
591 | void (*sendbreak)(stlport_t *portp, int len); | |
592 | void (*flowctrl)(stlport_t *portp, int state); | |
593 | void (*sendflow)(stlport_t *portp, int state); | |
594 | void (*flush)(stlport_t *portp); | |
595 | int (*datastate)(stlport_t *portp); | |
596 | void (*intr)(stlpanel_t *panelp, unsigned int iobase); | |
597 | } uart_t; | |
598 | ||
599 | /* | |
600 | * Define some macros to make calling these functions nice and clean. | |
601 | */ | |
602 | #define stl_panelinit (* ((uart_t *) panelp->uartp)->panelinit) | |
603 | #define stl_portinit (* ((uart_t *) portp->uartp)->portinit) | |
604 | #define stl_setport (* ((uart_t *) portp->uartp)->setport) | |
605 | #define stl_getsignals (* ((uart_t *) portp->uartp)->getsignals) | |
606 | #define stl_setsignals (* ((uart_t *) portp->uartp)->setsignals) | |
607 | #define stl_enablerxtx (* ((uart_t *) portp->uartp)->enablerxtx) | |
608 | #define stl_startrxtx (* ((uart_t *) portp->uartp)->startrxtx) | |
609 | #define stl_disableintrs (* ((uart_t *) portp->uartp)->disableintrs) | |
610 | #define stl_sendbreak (* ((uart_t *) portp->uartp)->sendbreak) | |
611 | #define stl_flowctrl (* ((uart_t *) portp->uartp)->flowctrl) | |
612 | #define stl_sendflow (* ((uart_t *) portp->uartp)->sendflow) | |
613 | #define stl_flush (* ((uart_t *) portp->uartp)->flush) | |
614 | #define stl_datastate (* ((uart_t *) portp->uartp)->datastate) | |
615 | ||
616 | /*****************************************************************************/ | |
617 | ||
618 | /* | |
619 | * CD1400 UART specific data initialization. | |
620 | */ | |
621 | static uart_t stl_cd1400uart = { | |
622 | stl_cd1400panelinit, | |
623 | stl_cd1400portinit, | |
624 | stl_cd1400setport, | |
625 | stl_cd1400getsignals, | |
626 | stl_cd1400setsignals, | |
627 | stl_cd1400enablerxtx, | |
628 | stl_cd1400startrxtx, | |
629 | stl_cd1400disableintrs, | |
630 | stl_cd1400sendbreak, | |
631 | stl_cd1400flowctrl, | |
632 | stl_cd1400sendflow, | |
633 | stl_cd1400flush, | |
634 | stl_cd1400datastate, | |
635 | stl_cd1400eiointr | |
636 | }; | |
637 | ||
638 | /* | |
639 | * Define the offsets within the register bank of a cd1400 based panel. | |
640 | * These io address offsets are common to the EasyIO board as well. | |
641 | */ | |
642 | #define EREG_ADDR 0 | |
643 | #define EREG_DATA 4 | |
644 | #define EREG_RXACK 5 | |
645 | #define EREG_TXACK 6 | |
646 | #define EREG_MDACK 7 | |
647 | ||
648 | #define EREG_BANKSIZE 8 | |
649 | ||
650 | #define CD1400_CLK 25000000 | |
651 | #define CD1400_CLK8M 20000000 | |
652 | ||
653 | /* | |
654 | * Define the cd1400 baud rate clocks. These are used when calculating | |
655 | * what clock and divisor to use for the required baud rate. Also | |
656 | * define the maximum baud rate allowed, and the default base baud. | |
657 | */ | |
658 | static int stl_cd1400clkdivs[] = { | |
659 | CD1400_CLK0, CD1400_CLK1, CD1400_CLK2, CD1400_CLK3, CD1400_CLK4 | |
660 | }; | |
661 | ||
662 | /*****************************************************************************/ | |
663 | ||
664 | /* | |
665 | * SC26198 UART specific data initization. | |
666 | */ | |
667 | static uart_t stl_sc26198uart = { | |
668 | stl_sc26198panelinit, | |
669 | stl_sc26198portinit, | |
670 | stl_sc26198setport, | |
671 | stl_sc26198getsignals, | |
672 | stl_sc26198setsignals, | |
673 | stl_sc26198enablerxtx, | |
674 | stl_sc26198startrxtx, | |
675 | stl_sc26198disableintrs, | |
676 | stl_sc26198sendbreak, | |
677 | stl_sc26198flowctrl, | |
678 | stl_sc26198sendflow, | |
679 | stl_sc26198flush, | |
680 | stl_sc26198datastate, | |
681 | stl_sc26198intr | |
682 | }; | |
683 | ||
684 | /* | |
685 | * Define the offsets within the register bank of a sc26198 based panel. | |
686 | */ | |
687 | #define XP_DATA 0 | |
688 | #define XP_ADDR 1 | |
689 | #define XP_MODID 2 | |
690 | #define XP_STATUS 2 | |
691 | #define XP_IACK 3 | |
692 | ||
693 | #define XP_BANKSIZE 4 | |
694 | ||
695 | /* | |
696 | * Define the sc26198 baud rate table. Offsets within the table | |
697 | * represent the actual baud rate selector of sc26198 registers. | |
698 | */ | |
699 | static unsigned int sc26198_baudtable[] = { | |
700 | 50, 75, 150, 200, 300, 450, 600, 900, 1200, 1800, 2400, 3600, | |
701 | 4800, 7200, 9600, 14400, 19200, 28800, 38400, 57600, 115200, | |
702 | 230400, 460800, 921600 | |
703 | }; | |
704 | ||
fe971071 | 705 | #define SC26198_NRBAUDS ARRAY_SIZE(sc26198_baudtable) |
1da177e4 LT |
706 | |
707 | /*****************************************************************************/ | |
708 | ||
709 | /* | |
710 | * Define the driver info for a user level control device. Used mainly | |
711 | * to get at port stats - only not using the port device itself. | |
712 | */ | |
713 | static struct file_operations stl_fsiomem = { | |
714 | .owner = THIS_MODULE, | |
715 | .ioctl = stl_memioctl, | |
716 | }; | |
717 | ||
718 | /*****************************************************************************/ | |
719 | ||
ca8eca68 | 720 | static struct class *stallion_class; |
1da177e4 LT |
721 | |
722 | /* | |
723 | * Loadable module initialization stuff. | |
724 | */ | |
725 | ||
726 | static int __init stallion_module_init(void) | |
727 | { | |
728 | unsigned long flags; | |
729 | ||
730 | #ifdef DEBUG | |
731 | printk("init_module()\n"); | |
732 | #endif | |
733 | ||
734 | save_flags(flags); | |
735 | cli(); | |
736 | stl_init(); | |
737 | restore_flags(flags); | |
738 | ||
014c2544 | 739 | return 0; |
1da177e4 LT |
740 | } |
741 | ||
742 | /*****************************************************************************/ | |
743 | ||
744 | static void __exit stallion_module_exit(void) | |
745 | { | |
746 | stlbrd_t *brdp; | |
747 | stlpanel_t *panelp; | |
748 | stlport_t *portp; | |
749 | unsigned long flags; | |
750 | int i, j, k; | |
751 | ||
752 | #ifdef DEBUG | |
753 | printk("cleanup_module()\n"); | |
754 | #endif | |
755 | ||
756 | printk(KERN_INFO "Unloading %s: version %s\n", stl_drvtitle, | |
757 | stl_drvversion); | |
758 | ||
759 | save_flags(flags); | |
760 | cli(); | |
761 | ||
762 | /* | |
763 | * Free up all allocated resources used by the ports. This includes | |
764 | * memory and interrupts. As part of this process we will also do | |
765 | * a hangup on every open port - to try to flush out any processes | |
766 | * hanging onto ports. | |
767 | */ | |
768 | i = tty_unregister_driver(stl_serial); | |
769 | put_tty_driver(stl_serial); | |
770 | if (i) { | |
771 | printk("STALLION: failed to un-register tty driver, " | |
772 | "errno=%d\n", -i); | |
773 | restore_flags(flags); | |
774 | return; | |
775 | } | |
776 | for (i = 0; i < 4; i++) { | |
777 | devfs_remove("staliomem/%d", i); | |
ca8eca68 | 778 | class_device_destroy(stallion_class, MKDEV(STL_SIOMEMMAJOR, i)); |
1da177e4 LT |
779 | } |
780 | devfs_remove("staliomem"); | |
781 | if ((i = unregister_chrdev(STL_SIOMEMMAJOR, "staliomem"))) | |
782 | printk("STALLION: failed to un-register serial memory device, " | |
783 | "errno=%d\n", -i); | |
ca8eca68 | 784 | class_destroy(stallion_class); |
1da177e4 | 785 | |
735d5661 | 786 | kfree(stl_tmpwritebuf); |
1da177e4 LT |
787 | |
788 | for (i = 0; (i < stl_nrbrds); i++) { | |
789 | if ((brdp = stl_brds[i]) == (stlbrd_t *) NULL) | |
790 | continue; | |
791 | ||
792 | free_irq(brdp->irq, brdp); | |
793 | ||
794 | for (j = 0; (j < STL_MAXPANELS); j++) { | |
795 | panelp = brdp->panels[j]; | |
796 | if (panelp == (stlpanel_t *) NULL) | |
797 | continue; | |
798 | for (k = 0; (k < STL_PORTSPERPANEL); k++) { | |
799 | portp = panelp->ports[k]; | |
800 | if (portp == (stlport_t *) NULL) | |
801 | continue; | |
802 | if (portp->tty != (struct tty_struct *) NULL) | |
803 | stl_hangup(portp->tty); | |
735d5661 | 804 | kfree(portp->tx.buf); |
1da177e4 LT |
805 | kfree(portp); |
806 | } | |
807 | kfree(panelp); | |
808 | } | |
809 | ||
810 | release_region(brdp->ioaddr1, brdp->iosize1); | |
811 | if (brdp->iosize2 > 0) | |
812 | release_region(brdp->ioaddr2, brdp->iosize2); | |
813 | ||
814 | kfree(brdp); | |
815 | stl_brds[i] = (stlbrd_t *) NULL; | |
816 | } | |
817 | ||
818 | restore_flags(flags); | |
819 | } | |
820 | ||
821 | module_init(stallion_module_init); | |
822 | module_exit(stallion_module_exit); | |
823 | ||
824 | /*****************************************************************************/ | |
825 | ||
826 | /* | |
827 | * Check for any arguments passed in on the module load command line. | |
828 | */ | |
829 | ||
830 | static void stl_argbrds(void) | |
831 | { | |
832 | stlconf_t conf; | |
833 | stlbrd_t *brdp; | |
834 | int i; | |
835 | ||
836 | #ifdef DEBUG | |
837 | printk("stl_argbrds()\n"); | |
838 | #endif | |
839 | ||
840 | for (i = stl_nrbrds; (i < stl_nargs); i++) { | |
841 | memset(&conf, 0, sizeof(conf)); | |
842 | if (stl_parsebrd(&conf, stl_brdsp[i]) == 0) | |
843 | continue; | |
844 | if ((brdp = stl_allocbrd()) == (stlbrd_t *) NULL) | |
845 | continue; | |
846 | stl_nrbrds = i + 1; | |
847 | brdp->brdnr = i; | |
848 | brdp->brdtype = conf.brdtype; | |
849 | brdp->ioaddr1 = conf.ioaddr1; | |
850 | brdp->ioaddr2 = conf.ioaddr2; | |
851 | brdp->irq = conf.irq; | |
852 | brdp->irqtype = conf.irqtype; | |
853 | stl_brdinit(brdp); | |
854 | } | |
855 | } | |
856 | ||
857 | /*****************************************************************************/ | |
858 | ||
859 | /* | |
860 | * Convert an ascii string number into an unsigned long. | |
861 | */ | |
862 | ||
863 | static unsigned long stl_atol(char *str) | |
864 | { | |
865 | unsigned long val; | |
866 | int base, c; | |
867 | char *sp; | |
868 | ||
869 | val = 0; | |
870 | sp = str; | |
871 | if ((*sp == '0') && (*(sp+1) == 'x')) { | |
872 | base = 16; | |
873 | sp += 2; | |
874 | } else if (*sp == '0') { | |
875 | base = 8; | |
876 | sp++; | |
877 | } else { | |
878 | base = 10; | |
879 | } | |
880 | ||
881 | for (; (*sp != 0); sp++) { | |
882 | c = (*sp > '9') ? (TOLOWER(*sp) - 'a' + 10) : (*sp - '0'); | |
883 | if ((c < 0) || (c >= base)) { | |
884 | printk("STALLION: invalid argument %s\n", str); | |
885 | val = 0; | |
886 | break; | |
887 | } | |
888 | val = (val * base) + c; | |
889 | } | |
014c2544 | 890 | return val; |
1da177e4 LT |
891 | } |
892 | ||
893 | /*****************************************************************************/ | |
894 | ||
895 | /* | |
896 | * Parse the supplied argument string, into the board conf struct. | |
897 | */ | |
898 | ||
899 | static int stl_parsebrd(stlconf_t *confp, char **argp) | |
900 | { | |
901 | char *sp; | |
fe971071 | 902 | int i; |
1da177e4 LT |
903 | |
904 | #ifdef DEBUG | |
905 | printk("stl_parsebrd(confp=%x,argp=%x)\n", (int) confp, (int) argp); | |
906 | #endif | |
907 | ||
908 | if ((argp[0] == (char *) NULL) || (*argp[0] == 0)) | |
014c2544 | 909 | return 0; |
1da177e4 LT |
910 | |
911 | for (sp = argp[0], i = 0; ((*sp != 0) && (i < 25)); sp++, i++) | |
912 | *sp = TOLOWER(*sp); | |
913 | ||
fe971071 | 914 | for (i = 0; i < ARRAY_SIZE(stl_brdstr); i++) { |
1da177e4 LT |
915 | if (strcmp(stl_brdstr[i].name, argp[0]) == 0) |
916 | break; | |
917 | } | |
fe971071 | 918 | if (i == ARRAY_SIZE(stl_brdstr)) { |
1da177e4 | 919 | printk("STALLION: unknown board name, %s?\n", argp[0]); |
fe971071 | 920 | return 0; |
1da177e4 LT |
921 | } |
922 | ||
923 | confp->brdtype = stl_brdstr[i].type; | |
924 | ||
925 | i = 1; | |
926 | if ((argp[i] != (char *) NULL) && (*argp[i] != 0)) | |
927 | confp->ioaddr1 = stl_atol(argp[i]); | |
928 | i++; | |
929 | if (confp->brdtype == BRD_ECH) { | |
930 | if ((argp[i] != (char *) NULL) && (*argp[i] != 0)) | |
931 | confp->ioaddr2 = stl_atol(argp[i]); | |
932 | i++; | |
933 | } | |
934 | if ((argp[i] != (char *) NULL) && (*argp[i] != 0)) | |
935 | confp->irq = stl_atol(argp[i]); | |
014c2544 | 936 | return 1; |
1da177e4 LT |
937 | } |
938 | ||
939 | /*****************************************************************************/ | |
940 | ||
1da177e4 LT |
941 | /* |
942 | * Allocate a new board structure. Fill out the basic info in it. | |
943 | */ | |
944 | ||
945 | static stlbrd_t *stl_allocbrd(void) | |
946 | { | |
947 | stlbrd_t *brdp; | |
948 | ||
b0b4ed72 TK |
949 | brdp = kzalloc(sizeof(stlbrd_t), GFP_KERNEL); |
950 | if (!brdp) { | |
1da177e4 LT |
951 | printk("STALLION: failed to allocate memory (size=%d)\n", |
952 | sizeof(stlbrd_t)); | |
b0b4ed72 | 953 | return NULL; |
1da177e4 LT |
954 | } |
955 | ||
1da177e4 | 956 | brdp->magic = STL_BOARDMAGIC; |
014c2544 | 957 | return brdp; |
1da177e4 LT |
958 | } |
959 | ||
960 | /*****************************************************************************/ | |
961 | ||
962 | static int stl_open(struct tty_struct *tty, struct file *filp) | |
963 | { | |
964 | stlport_t *portp; | |
965 | stlbrd_t *brdp; | |
966 | unsigned int minordev; | |
967 | int brdnr, panelnr, portnr, rc; | |
968 | ||
969 | #ifdef DEBUG | |
970 | printk("stl_open(tty=%x,filp=%x): device=%s\n", (int) tty, | |
971 | (int) filp, tty->name); | |
972 | #endif | |
973 | ||
974 | minordev = tty->index; | |
975 | brdnr = MINOR2BRD(minordev); | |
976 | if (brdnr >= stl_nrbrds) | |
014c2544 | 977 | return -ENODEV; |
1da177e4 LT |
978 | brdp = stl_brds[brdnr]; |
979 | if (brdp == (stlbrd_t *) NULL) | |
014c2544 | 980 | return -ENODEV; |
1da177e4 LT |
981 | minordev = MINOR2PORT(minordev); |
982 | for (portnr = -1, panelnr = 0; (panelnr < STL_MAXPANELS); panelnr++) { | |
983 | if (brdp->panels[panelnr] == (stlpanel_t *) NULL) | |
984 | break; | |
985 | if (minordev < brdp->panels[panelnr]->nrports) { | |
986 | portnr = minordev; | |
987 | break; | |
988 | } | |
989 | minordev -= brdp->panels[panelnr]->nrports; | |
990 | } | |
991 | if (portnr < 0) | |
014c2544 | 992 | return -ENODEV; |
1da177e4 LT |
993 | |
994 | portp = brdp->panels[panelnr]->ports[portnr]; | |
995 | if (portp == (stlport_t *) NULL) | |
014c2544 | 996 | return -ENODEV; |
1da177e4 LT |
997 | |
998 | /* | |
999 | * On the first open of the device setup the port hardware, and | |
1000 | * initialize the per port data structure. | |
1001 | */ | |
1002 | portp->tty = tty; | |
1003 | tty->driver_data = portp; | |
1004 | portp->refcount++; | |
1005 | ||
1006 | if ((portp->flags & ASYNC_INITIALIZED) == 0) { | |
b0b4ed72 TK |
1007 | if (!portp->tx.buf) { |
1008 | portp->tx.buf = kmalloc(STL_TXBUFSIZE, GFP_KERNEL); | |
1009 | if (!portp->tx.buf) | |
014c2544 | 1010 | return -ENOMEM; |
1da177e4 LT |
1011 | portp->tx.head = portp->tx.buf; |
1012 | portp->tx.tail = portp->tx.buf; | |
1013 | } | |
1014 | stl_setport(portp, tty->termios); | |
1015 | portp->sigs = stl_getsignals(portp); | |
1016 | stl_setsignals(portp, 1, 1); | |
1017 | stl_enablerxtx(portp, 1, 1); | |
1018 | stl_startrxtx(portp, 1, 0); | |
1019 | clear_bit(TTY_IO_ERROR, &tty->flags); | |
1020 | portp->flags |= ASYNC_INITIALIZED; | |
1021 | } | |
1022 | ||
1023 | /* | |
1024 | * Check if this port is in the middle of closing. If so then wait | |
1025 | * until it is closed then return error status, based on flag settings. | |
1026 | * The sleep here does not need interrupt protection since the wakeup | |
1027 | * for it is done with the same context. | |
1028 | */ | |
1029 | if (portp->flags & ASYNC_CLOSING) { | |
1030 | interruptible_sleep_on(&portp->close_wait); | |
1031 | if (portp->flags & ASYNC_HUP_NOTIFY) | |
014c2544 JJ |
1032 | return -EAGAIN; |
1033 | return -ERESTARTSYS; | |
1da177e4 LT |
1034 | } |
1035 | ||
1036 | /* | |
1037 | * Based on type of open being done check if it can overlap with any | |
1038 | * previous opens still in effect. If we are a normal serial device | |
1039 | * then also we might have to wait for carrier. | |
1040 | */ | |
1041 | if (!(filp->f_flags & O_NONBLOCK)) { | |
1042 | if ((rc = stl_waitcarrier(portp, filp)) != 0) | |
014c2544 | 1043 | return rc; |
1da177e4 LT |
1044 | } |
1045 | portp->flags |= ASYNC_NORMAL_ACTIVE; | |
1046 | ||
014c2544 | 1047 | return 0; |
1da177e4 LT |
1048 | } |
1049 | ||
1050 | /*****************************************************************************/ | |
1051 | ||
1052 | /* | |
1053 | * Possibly need to wait for carrier (DCD signal) to come high. Say | |
1054 | * maybe because if we are clocal then we don't need to wait... | |
1055 | */ | |
1056 | ||
1057 | static int stl_waitcarrier(stlport_t *portp, struct file *filp) | |
1058 | { | |
1059 | unsigned long flags; | |
1060 | int rc, doclocal; | |
1061 | ||
1062 | #ifdef DEBUG | |
1063 | printk("stl_waitcarrier(portp=%x,filp=%x)\n", (int) portp, (int) filp); | |
1064 | #endif | |
1065 | ||
1066 | rc = 0; | |
1067 | doclocal = 0; | |
1068 | ||
1069 | if (portp->tty->termios->c_cflag & CLOCAL) | |
1070 | doclocal++; | |
1071 | ||
1072 | save_flags(flags); | |
1073 | cli(); | |
1074 | portp->openwaitcnt++; | |
1075 | if (! tty_hung_up_p(filp)) | |
1076 | portp->refcount--; | |
1077 | ||
1078 | for (;;) { | |
1079 | stl_setsignals(portp, 1, 1); | |
1080 | if (tty_hung_up_p(filp) || | |
1081 | ((portp->flags & ASYNC_INITIALIZED) == 0)) { | |
1082 | if (portp->flags & ASYNC_HUP_NOTIFY) | |
1083 | rc = -EBUSY; | |
1084 | else | |
1085 | rc = -ERESTARTSYS; | |
1086 | break; | |
1087 | } | |
1088 | if (((portp->flags & ASYNC_CLOSING) == 0) && | |
1089 | (doclocal || (portp->sigs & TIOCM_CD))) { | |
1090 | break; | |
1091 | } | |
1092 | if (signal_pending(current)) { | |
1093 | rc = -ERESTARTSYS; | |
1094 | break; | |
1095 | } | |
1096 | interruptible_sleep_on(&portp->open_wait); | |
1097 | } | |
1098 | ||
1099 | if (! tty_hung_up_p(filp)) | |
1100 | portp->refcount++; | |
1101 | portp->openwaitcnt--; | |
1102 | restore_flags(flags); | |
1103 | ||
014c2544 | 1104 | return rc; |
1da177e4 LT |
1105 | } |
1106 | ||
1107 | /*****************************************************************************/ | |
1108 | ||
1109 | static void stl_close(struct tty_struct *tty, struct file *filp) | |
1110 | { | |
1111 | stlport_t *portp; | |
1112 | unsigned long flags; | |
1113 | ||
1114 | #ifdef DEBUG | |
1115 | printk("stl_close(tty=%x,filp=%x)\n", (int) tty, (int) filp); | |
1116 | #endif | |
1117 | ||
1118 | portp = tty->driver_data; | |
1119 | if (portp == (stlport_t *) NULL) | |
1120 | return; | |
1121 | ||
1122 | save_flags(flags); | |
1123 | cli(); | |
1124 | if (tty_hung_up_p(filp)) { | |
1125 | restore_flags(flags); | |
1126 | return; | |
1127 | } | |
1128 | if ((tty->count == 1) && (portp->refcount != 1)) | |
1129 | portp->refcount = 1; | |
1130 | if (portp->refcount-- > 1) { | |
1131 | restore_flags(flags); | |
1132 | return; | |
1133 | } | |
1134 | ||
1135 | portp->refcount = 0; | |
1136 | portp->flags |= ASYNC_CLOSING; | |
1137 | ||
1138 | /* | |
1139 | * May want to wait for any data to drain before closing. The BUSY | |
1140 | * flag keeps track of whether we are still sending or not - it is | |
1141 | * very accurate for the cd1400, not quite so for the sc26198. | |
1142 | * (The sc26198 has no "end-of-data" interrupt only empty FIFO) | |
1143 | */ | |
1144 | tty->closing = 1; | |
1145 | if (portp->closing_wait != ASYNC_CLOSING_WAIT_NONE) | |
1146 | tty_wait_until_sent(tty, portp->closing_wait); | |
1147 | stl_waituntilsent(tty, (HZ / 2)); | |
1148 | ||
1149 | portp->flags &= ~ASYNC_INITIALIZED; | |
1150 | stl_disableintrs(portp); | |
1151 | if (tty->termios->c_cflag & HUPCL) | |
1152 | stl_setsignals(portp, 0, 0); | |
1153 | stl_enablerxtx(portp, 0, 0); | |
1154 | stl_flushbuffer(tty); | |
1155 | portp->istate = 0; | |
1156 | if (portp->tx.buf != (char *) NULL) { | |
1157 | kfree(portp->tx.buf); | |
1158 | portp->tx.buf = (char *) NULL; | |
1159 | portp->tx.head = (char *) NULL; | |
1160 | portp->tx.tail = (char *) NULL; | |
1161 | } | |
1162 | set_bit(TTY_IO_ERROR, &tty->flags); | |
1163 | tty_ldisc_flush(tty); | |
1164 | ||
1165 | tty->closing = 0; | |
1166 | portp->tty = (struct tty_struct *) NULL; | |
1167 | ||
1168 | if (portp->openwaitcnt) { | |
1169 | if (portp->close_delay) | |
1170 | msleep_interruptible(jiffies_to_msecs(portp->close_delay)); | |
1171 | wake_up_interruptible(&portp->open_wait); | |
1172 | } | |
1173 | ||
1174 | portp->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); | |
1175 | wake_up_interruptible(&portp->close_wait); | |
1176 | restore_flags(flags); | |
1177 | } | |
1178 | ||
1179 | /*****************************************************************************/ | |
1180 | ||
1181 | /* | |
1182 | * Write routine. Take data and stuff it in to the TX ring queue. | |
1183 | * If transmit interrupts are not running then start them. | |
1184 | */ | |
1185 | ||
1186 | static int stl_write(struct tty_struct *tty, const unsigned char *buf, int count) | |
1187 | { | |
1188 | stlport_t *portp; | |
1189 | unsigned int len, stlen; | |
1190 | unsigned char *chbuf; | |
1191 | char *head, *tail; | |
1192 | ||
1193 | #ifdef DEBUG | |
1194 | printk("stl_write(tty=%x,buf=%x,count=%d)\n", | |
1195 | (int) tty, (int) buf, count); | |
1196 | #endif | |
1197 | ||
1198 | if ((tty == (struct tty_struct *) NULL) || | |
1199 | (stl_tmpwritebuf == (char *) NULL)) | |
014c2544 | 1200 | return 0; |
1da177e4 LT |
1201 | portp = tty->driver_data; |
1202 | if (portp == (stlport_t *) NULL) | |
014c2544 | 1203 | return 0; |
1da177e4 | 1204 | if (portp->tx.buf == (char *) NULL) |
014c2544 | 1205 | return 0; |
1da177e4 LT |
1206 | |
1207 | /* | |
1208 | * If copying direct from user space we must cater for page faults, | |
1209 | * causing us to "sleep" here for a while. To handle this copy in all | |
1210 | * the data we need now, into a local buffer. Then when we got it all | |
1211 | * copy it into the TX buffer. | |
1212 | */ | |
1213 | chbuf = (unsigned char *) buf; | |
1214 | ||
1215 | head = portp->tx.head; | |
1216 | tail = portp->tx.tail; | |
1217 | if (head >= tail) { | |
1218 | len = STL_TXBUFSIZE - (head - tail) - 1; | |
1219 | stlen = STL_TXBUFSIZE - (head - portp->tx.buf); | |
1220 | } else { | |
1221 | len = tail - head - 1; | |
1222 | stlen = len; | |
1223 | } | |
1224 | ||
1225 | len = MIN(len, count); | |
1226 | count = 0; | |
1227 | while (len > 0) { | |
1228 | stlen = MIN(len, stlen); | |
1229 | memcpy(head, chbuf, stlen); | |
1230 | len -= stlen; | |
1231 | chbuf += stlen; | |
1232 | count += stlen; | |
1233 | head += stlen; | |
1234 | if (head >= (portp->tx.buf + STL_TXBUFSIZE)) { | |
1235 | head = portp->tx.buf; | |
1236 | stlen = tail - head; | |
1237 | } | |
1238 | } | |
1239 | portp->tx.head = head; | |
1240 | ||
1241 | clear_bit(ASYI_TXLOW, &portp->istate); | |
1242 | stl_startrxtx(portp, -1, 1); | |
1243 | ||
014c2544 | 1244 | return count; |
1da177e4 LT |
1245 | } |
1246 | ||
1247 | /*****************************************************************************/ | |
1248 | ||
1249 | static void stl_putchar(struct tty_struct *tty, unsigned char ch) | |
1250 | { | |
1251 | stlport_t *portp; | |
1252 | unsigned int len; | |
1253 | char *head, *tail; | |
1254 | ||
1255 | #ifdef DEBUG | |
1256 | printk("stl_putchar(tty=%x,ch=%x)\n", (int) tty, (int) ch); | |
1257 | #endif | |
1258 | ||
1259 | if (tty == (struct tty_struct *) NULL) | |
1260 | return; | |
1261 | portp = tty->driver_data; | |
1262 | if (portp == (stlport_t *) NULL) | |
1263 | return; | |
1264 | if (portp->tx.buf == (char *) NULL) | |
1265 | return; | |
1266 | ||
1267 | head = portp->tx.head; | |
1268 | tail = portp->tx.tail; | |
1269 | ||
1270 | len = (head >= tail) ? (STL_TXBUFSIZE - (head - tail)) : (tail - head); | |
1271 | len--; | |
1272 | ||
1273 | if (len > 0) { | |
1274 | *head++ = ch; | |
1275 | if (head >= (portp->tx.buf + STL_TXBUFSIZE)) | |
1276 | head = portp->tx.buf; | |
1277 | } | |
1278 | portp->tx.head = head; | |
1279 | } | |
1280 | ||
1281 | /*****************************************************************************/ | |
1282 | ||
1283 | /* | |
1284 | * If there are any characters in the buffer then make sure that TX | |
1285 | * interrupts are on and get'em out. Normally used after the putchar | |
1286 | * routine has been called. | |
1287 | */ | |
1288 | ||
1289 | static void stl_flushchars(struct tty_struct *tty) | |
1290 | { | |
1291 | stlport_t *portp; | |
1292 | ||
1293 | #ifdef DEBUG | |
1294 | printk("stl_flushchars(tty=%x)\n", (int) tty); | |
1295 | #endif | |
1296 | ||
1297 | if (tty == (struct tty_struct *) NULL) | |
1298 | return; | |
1299 | portp = tty->driver_data; | |
1300 | if (portp == (stlport_t *) NULL) | |
1301 | return; | |
1302 | if (portp->tx.buf == (char *) NULL) | |
1303 | return; | |
1304 | ||
1305 | #if 0 | |
1306 | if (tty->stopped || tty->hw_stopped || | |
1307 | (portp->tx.head == portp->tx.tail)) | |
1308 | return; | |
1309 | #endif | |
1310 | stl_startrxtx(portp, -1, 1); | |
1311 | } | |
1312 | ||
1313 | /*****************************************************************************/ | |
1314 | ||
1315 | static int stl_writeroom(struct tty_struct *tty) | |
1316 | { | |
1317 | stlport_t *portp; | |
1318 | char *head, *tail; | |
1319 | ||
1320 | #ifdef DEBUG | |
1321 | printk("stl_writeroom(tty=%x)\n", (int) tty); | |
1322 | #endif | |
1323 | ||
1324 | if (tty == (struct tty_struct *) NULL) | |
014c2544 | 1325 | return 0; |
1da177e4 LT |
1326 | portp = tty->driver_data; |
1327 | if (portp == (stlport_t *) NULL) | |
014c2544 | 1328 | return 0; |
1da177e4 | 1329 | if (portp->tx.buf == (char *) NULL) |
014c2544 | 1330 | return 0; |
1da177e4 LT |
1331 | |
1332 | head = portp->tx.head; | |
1333 | tail = portp->tx.tail; | |
014c2544 | 1334 | return ((head >= tail) ? (STL_TXBUFSIZE - (head - tail) - 1) : (tail - head - 1)); |
1da177e4 LT |
1335 | } |
1336 | ||
1337 | /*****************************************************************************/ | |
1338 | ||
1339 | /* | |
1340 | * Return number of chars in the TX buffer. Normally we would just | |
1341 | * calculate the number of chars in the buffer and return that, but if | |
1342 | * the buffer is empty and TX interrupts are still on then we return | |
1343 | * that the buffer still has 1 char in it. This way whoever called us | |
1344 | * will not think that ALL chars have drained - since the UART still | |
1345 | * must have some chars in it (we are busy after all). | |
1346 | */ | |
1347 | ||
1348 | static int stl_charsinbuffer(struct tty_struct *tty) | |
1349 | { | |
1350 | stlport_t *portp; | |
1351 | unsigned int size; | |
1352 | char *head, *tail; | |
1353 | ||
1354 | #ifdef DEBUG | |
1355 | printk("stl_charsinbuffer(tty=%x)\n", (int) tty); | |
1356 | #endif | |
1357 | ||
1358 | if (tty == (struct tty_struct *) NULL) | |
014c2544 | 1359 | return 0; |
1da177e4 LT |
1360 | portp = tty->driver_data; |
1361 | if (portp == (stlport_t *) NULL) | |
014c2544 | 1362 | return 0; |
1da177e4 | 1363 | if (portp->tx.buf == (char *) NULL) |
014c2544 | 1364 | return 0; |
1da177e4 LT |
1365 | |
1366 | head = portp->tx.head; | |
1367 | tail = portp->tx.tail; | |
1368 | size = (head >= tail) ? (head - tail) : (STL_TXBUFSIZE - (tail - head)); | |
1369 | if ((size == 0) && test_bit(ASYI_TXBUSY, &portp->istate)) | |
1370 | size = 1; | |
014c2544 | 1371 | return size; |
1da177e4 LT |
1372 | } |
1373 | ||
1374 | /*****************************************************************************/ | |
1375 | ||
1376 | /* | |
1377 | * Generate the serial struct info. | |
1378 | */ | |
1379 | ||
1380 | static int stl_getserial(stlport_t *portp, struct serial_struct __user *sp) | |
1381 | { | |
1382 | struct serial_struct sio; | |
1383 | stlbrd_t *brdp; | |
1384 | ||
1385 | #ifdef DEBUG | |
1386 | printk("stl_getserial(portp=%x,sp=%x)\n", (int) portp, (int) sp); | |
1387 | #endif | |
1388 | ||
1389 | memset(&sio, 0, sizeof(struct serial_struct)); | |
1390 | sio.line = portp->portnr; | |
1391 | sio.port = portp->ioaddr; | |
1392 | sio.flags = portp->flags; | |
1393 | sio.baud_base = portp->baud_base; | |
1394 | sio.close_delay = portp->close_delay; | |
1395 | sio.closing_wait = portp->closing_wait; | |
1396 | sio.custom_divisor = portp->custom_divisor; | |
1397 | sio.hub6 = 0; | |
1398 | if (portp->uartp == &stl_cd1400uart) { | |
1399 | sio.type = PORT_CIRRUS; | |
1400 | sio.xmit_fifo_size = CD1400_TXFIFOSIZE; | |
1401 | } else { | |
1402 | sio.type = PORT_UNKNOWN; | |
1403 | sio.xmit_fifo_size = SC26198_TXFIFOSIZE; | |
1404 | } | |
1405 | ||
1406 | brdp = stl_brds[portp->brdnr]; | |
1407 | if (brdp != (stlbrd_t *) NULL) | |
1408 | sio.irq = brdp->irq; | |
1409 | ||
1410 | return copy_to_user(sp, &sio, sizeof(struct serial_struct)) ? -EFAULT : 0; | |
1411 | } | |
1412 | ||
1413 | /*****************************************************************************/ | |
1414 | ||
1415 | /* | |
1416 | * Set port according to the serial struct info. | |
1417 | * At this point we do not do any auto-configure stuff, so we will | |
1418 | * just quietly ignore any requests to change irq, etc. | |
1419 | */ | |
1420 | ||
1421 | static int stl_setserial(stlport_t *portp, struct serial_struct __user *sp) | |
1422 | { | |
1423 | struct serial_struct sio; | |
1424 | ||
1425 | #ifdef DEBUG | |
1426 | printk("stl_setserial(portp=%x,sp=%x)\n", (int) portp, (int) sp); | |
1427 | #endif | |
1428 | ||
1429 | if (copy_from_user(&sio, sp, sizeof(struct serial_struct))) | |
1430 | return -EFAULT; | |
1431 | if (!capable(CAP_SYS_ADMIN)) { | |
1432 | if ((sio.baud_base != portp->baud_base) || | |
1433 | (sio.close_delay != portp->close_delay) || | |
1434 | ((sio.flags & ~ASYNC_USR_MASK) != | |
1435 | (portp->flags & ~ASYNC_USR_MASK))) | |
014c2544 | 1436 | return -EPERM; |
1da177e4 LT |
1437 | } |
1438 | ||
1439 | portp->flags = (portp->flags & ~ASYNC_USR_MASK) | | |
1440 | (sio.flags & ASYNC_USR_MASK); | |
1441 | portp->baud_base = sio.baud_base; | |
1442 | portp->close_delay = sio.close_delay; | |
1443 | portp->closing_wait = sio.closing_wait; | |
1444 | portp->custom_divisor = sio.custom_divisor; | |
1445 | stl_setport(portp, portp->tty->termios); | |
014c2544 | 1446 | return 0; |
1da177e4 LT |
1447 | } |
1448 | ||
1449 | /*****************************************************************************/ | |
1450 | ||
1451 | static int stl_tiocmget(struct tty_struct *tty, struct file *file) | |
1452 | { | |
1453 | stlport_t *portp; | |
1454 | ||
1455 | if (tty == (struct tty_struct *) NULL) | |
014c2544 | 1456 | return -ENODEV; |
1da177e4 LT |
1457 | portp = tty->driver_data; |
1458 | if (portp == (stlport_t *) NULL) | |
014c2544 | 1459 | return -ENODEV; |
1da177e4 | 1460 | if (tty->flags & (1 << TTY_IO_ERROR)) |
014c2544 | 1461 | return -EIO; |
1da177e4 LT |
1462 | |
1463 | return stl_getsignals(portp); | |
1464 | } | |
1465 | ||
1466 | static int stl_tiocmset(struct tty_struct *tty, struct file *file, | |
1467 | unsigned int set, unsigned int clear) | |
1468 | { | |
1469 | stlport_t *portp; | |
1470 | int rts = -1, dtr = -1; | |
1471 | ||
1472 | if (tty == (struct tty_struct *) NULL) | |
014c2544 | 1473 | return -ENODEV; |
1da177e4 LT |
1474 | portp = tty->driver_data; |
1475 | if (portp == (stlport_t *) NULL) | |
014c2544 | 1476 | return -ENODEV; |
1da177e4 | 1477 | if (tty->flags & (1 << TTY_IO_ERROR)) |
014c2544 | 1478 | return -EIO; |
1da177e4 LT |
1479 | |
1480 | if (set & TIOCM_RTS) | |
1481 | rts = 1; | |
1482 | if (set & TIOCM_DTR) | |
1483 | dtr = 1; | |
1484 | if (clear & TIOCM_RTS) | |
1485 | rts = 0; | |
1486 | if (clear & TIOCM_DTR) | |
1487 | dtr = 0; | |
1488 | ||
1489 | stl_setsignals(portp, dtr, rts); | |
1490 | return 0; | |
1491 | } | |
1492 | ||
1493 | static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) | |
1494 | { | |
1495 | stlport_t *portp; | |
1496 | unsigned int ival; | |
1497 | int rc; | |
1498 | void __user *argp = (void __user *)arg; | |
1499 | ||
1500 | #ifdef DEBUG | |
1501 | printk("stl_ioctl(tty=%x,file=%x,cmd=%x,arg=%x)\n", | |
1502 | (int) tty, (int) file, cmd, (int) arg); | |
1503 | #endif | |
1504 | ||
1505 | if (tty == (struct tty_struct *) NULL) | |
014c2544 | 1506 | return -ENODEV; |
1da177e4 LT |
1507 | portp = tty->driver_data; |
1508 | if (portp == (stlport_t *) NULL) | |
014c2544 | 1509 | return -ENODEV; |
1da177e4 LT |
1510 | |
1511 | if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && | |
1512 | (cmd != COM_GETPORTSTATS) && (cmd != COM_CLRPORTSTATS)) { | |
1513 | if (tty->flags & (1 << TTY_IO_ERROR)) | |
014c2544 | 1514 | return -EIO; |
1da177e4 LT |
1515 | } |
1516 | ||
1517 | rc = 0; | |
1518 | ||
1519 | switch (cmd) { | |
1520 | case TIOCGSOFTCAR: | |
1521 | rc = put_user(((tty->termios->c_cflag & CLOCAL) ? 1 : 0), | |
1522 | (unsigned __user *) argp); | |
1523 | break; | |
1524 | case TIOCSSOFTCAR: | |
1525 | if (get_user(ival, (unsigned int __user *) arg)) | |
1526 | return -EFAULT; | |
1527 | tty->termios->c_cflag = | |
1528 | (tty->termios->c_cflag & ~CLOCAL) | | |
1529 | (ival ? CLOCAL : 0); | |
1530 | break; | |
1531 | case TIOCGSERIAL: | |
1532 | rc = stl_getserial(portp, argp); | |
1533 | break; | |
1534 | case TIOCSSERIAL: | |
1535 | rc = stl_setserial(portp, argp); | |
1536 | break; | |
1537 | case COM_GETPORTSTATS: | |
1538 | rc = stl_getportstats(portp, argp); | |
1539 | break; | |
1540 | case COM_CLRPORTSTATS: | |
1541 | rc = stl_clrportstats(portp, argp); | |
1542 | break; | |
1543 | case TIOCSERCONFIG: | |
1544 | case TIOCSERGWILD: | |
1545 | case TIOCSERSWILD: | |
1546 | case TIOCSERGETLSR: | |
1547 | case TIOCSERGSTRUCT: | |
1548 | case TIOCSERGETMULTI: | |
1549 | case TIOCSERSETMULTI: | |
1550 | default: | |
1551 | rc = -ENOIOCTLCMD; | |
1552 | break; | |
1553 | } | |
1554 | ||
014c2544 | 1555 | return rc; |
1da177e4 LT |
1556 | } |
1557 | ||
1558 | /*****************************************************************************/ | |
1559 | ||
1560 | static void stl_settermios(struct tty_struct *tty, struct termios *old) | |
1561 | { | |
1562 | stlport_t *portp; | |
1563 | struct termios *tiosp; | |
1564 | ||
1565 | #ifdef DEBUG | |
1566 | printk("stl_settermios(tty=%x,old=%x)\n", (int) tty, (int) old); | |
1567 | #endif | |
1568 | ||
1569 | if (tty == (struct tty_struct *) NULL) | |
1570 | return; | |
1571 | portp = tty->driver_data; | |
1572 | if (portp == (stlport_t *) NULL) | |
1573 | return; | |
1574 | ||
1575 | tiosp = tty->termios; | |
1576 | if ((tiosp->c_cflag == old->c_cflag) && | |
1577 | (tiosp->c_iflag == old->c_iflag)) | |
1578 | return; | |
1579 | ||
1580 | stl_setport(portp, tiosp); | |
1581 | stl_setsignals(portp, ((tiosp->c_cflag & (CBAUD & ~CBAUDEX)) ? 1 : 0), | |
1582 | -1); | |
1583 | if ((old->c_cflag & CRTSCTS) && ((tiosp->c_cflag & CRTSCTS) == 0)) { | |
1584 | tty->hw_stopped = 0; | |
1585 | stl_start(tty); | |
1586 | } | |
1587 | if (((old->c_cflag & CLOCAL) == 0) && (tiosp->c_cflag & CLOCAL)) | |
1588 | wake_up_interruptible(&portp->open_wait); | |
1589 | } | |
1590 | ||
1591 | /*****************************************************************************/ | |
1592 | ||
1593 | /* | |
1594 | * Attempt to flow control who ever is sending us data. Based on termios | |
1595 | * settings use software or/and hardware flow control. | |
1596 | */ | |
1597 | ||
1598 | static void stl_throttle(struct tty_struct *tty) | |
1599 | { | |
1600 | stlport_t *portp; | |
1601 | ||
1602 | #ifdef DEBUG | |
1603 | printk("stl_throttle(tty=%x)\n", (int) tty); | |
1604 | #endif | |
1605 | ||
1606 | if (tty == (struct tty_struct *) NULL) | |
1607 | return; | |
1608 | portp = tty->driver_data; | |
1609 | if (portp == (stlport_t *) NULL) | |
1610 | return; | |
1611 | stl_flowctrl(portp, 0); | |
1612 | } | |
1613 | ||
1614 | /*****************************************************************************/ | |
1615 | ||
1616 | /* | |
1617 | * Unflow control the device sending us data... | |
1618 | */ | |
1619 | ||
1620 | static void stl_unthrottle(struct tty_struct *tty) | |
1621 | { | |
1622 | stlport_t *portp; | |
1623 | ||
1624 | #ifdef DEBUG | |
1625 | printk("stl_unthrottle(tty=%x)\n", (int) tty); | |
1626 | #endif | |
1627 | ||
1628 | if (tty == (struct tty_struct *) NULL) | |
1629 | return; | |
1630 | portp = tty->driver_data; | |
1631 | if (portp == (stlport_t *) NULL) | |
1632 | return; | |
1633 | stl_flowctrl(portp, 1); | |
1634 | } | |
1635 | ||
1636 | /*****************************************************************************/ | |
1637 | ||
1638 | /* | |
1639 | * Stop the transmitter. Basically to do this we will just turn TX | |
1640 | * interrupts off. | |
1641 | */ | |
1642 | ||
1643 | static void stl_stop(struct tty_struct *tty) | |
1644 | { | |
1645 | stlport_t *portp; | |
1646 | ||
1647 | #ifdef DEBUG | |
1648 | printk("stl_stop(tty=%x)\n", (int) tty); | |
1649 | #endif | |
1650 | ||
1651 | if (tty == (struct tty_struct *) NULL) | |
1652 | return; | |
1653 | portp = tty->driver_data; | |
1654 | if (portp == (stlport_t *) NULL) | |
1655 | return; | |
1656 | stl_startrxtx(portp, -1, 0); | |
1657 | } | |
1658 | ||
1659 | /*****************************************************************************/ | |
1660 | ||
1661 | /* | |
1662 | * Start the transmitter again. Just turn TX interrupts back on. | |
1663 | */ | |
1664 | ||
1665 | static void stl_start(struct tty_struct *tty) | |
1666 | { | |
1667 | stlport_t *portp; | |
1668 | ||
1669 | #ifdef DEBUG | |
1670 | printk("stl_start(tty=%x)\n", (int) tty); | |
1671 | #endif | |
1672 | ||
1673 | if (tty == (struct tty_struct *) NULL) | |
1674 | return; | |
1675 | portp = tty->driver_data; | |
1676 | if (portp == (stlport_t *) NULL) | |
1677 | return; | |
1678 | stl_startrxtx(portp, -1, 1); | |
1679 | } | |
1680 | ||
1681 | /*****************************************************************************/ | |
1682 | ||
1683 | /* | |
1684 | * Hangup this port. This is pretty much like closing the port, only | |
1685 | * a little more brutal. No waiting for data to drain. Shutdown the | |
1686 | * port and maybe drop signals. | |
1687 | */ | |
1688 | ||
1689 | static void stl_hangup(struct tty_struct *tty) | |
1690 | { | |
1691 | stlport_t *portp; | |
1692 | ||
1693 | #ifdef DEBUG | |
1694 | printk("stl_hangup(tty=%x)\n", (int) tty); | |
1695 | #endif | |
1696 | ||
1697 | if (tty == (struct tty_struct *) NULL) | |
1698 | return; | |
1699 | portp = tty->driver_data; | |
1700 | if (portp == (stlport_t *) NULL) | |
1701 | return; | |
1702 | ||
1703 | portp->flags &= ~ASYNC_INITIALIZED; | |
1704 | stl_disableintrs(portp); | |
1705 | if (tty->termios->c_cflag & HUPCL) | |
1706 | stl_setsignals(portp, 0, 0); | |
1707 | stl_enablerxtx(portp, 0, 0); | |
1708 | stl_flushbuffer(tty); | |
1709 | portp->istate = 0; | |
1710 | set_bit(TTY_IO_ERROR, &tty->flags); | |
1711 | if (portp->tx.buf != (char *) NULL) { | |
1712 | kfree(portp->tx.buf); | |
1713 | portp->tx.buf = (char *) NULL; | |
1714 | portp->tx.head = (char *) NULL; | |
1715 | portp->tx.tail = (char *) NULL; | |
1716 | } | |
1717 | portp->tty = (struct tty_struct *) NULL; | |
1718 | portp->flags &= ~ASYNC_NORMAL_ACTIVE; | |
1719 | portp->refcount = 0; | |
1720 | wake_up_interruptible(&portp->open_wait); | |
1721 | } | |
1722 | ||
1723 | /*****************************************************************************/ | |
1724 | ||
1725 | static void stl_flushbuffer(struct tty_struct *tty) | |
1726 | { | |
1727 | stlport_t *portp; | |
1728 | ||
1729 | #ifdef DEBUG | |
1730 | printk("stl_flushbuffer(tty=%x)\n", (int) tty); | |
1731 | #endif | |
1732 | ||
1733 | if (tty == (struct tty_struct *) NULL) | |
1734 | return; | |
1735 | portp = tty->driver_data; | |
1736 | if (portp == (stlport_t *) NULL) | |
1737 | return; | |
1738 | ||
1739 | stl_flush(portp); | |
1740 | tty_wakeup(tty); | |
1741 | } | |
1742 | ||
1743 | /*****************************************************************************/ | |
1744 | ||
1745 | static void stl_breakctl(struct tty_struct *tty, int state) | |
1746 | { | |
1747 | stlport_t *portp; | |
1748 | ||
1749 | #ifdef DEBUG | |
1750 | printk("stl_breakctl(tty=%x,state=%d)\n", (int) tty, state); | |
1751 | #endif | |
1752 | ||
1753 | if (tty == (struct tty_struct *) NULL) | |
1754 | return; | |
1755 | portp = tty->driver_data; | |
1756 | if (portp == (stlport_t *) NULL) | |
1757 | return; | |
1758 | ||
1759 | stl_sendbreak(portp, ((state == -1) ? 1 : 2)); | |
1760 | } | |
1761 | ||
1762 | /*****************************************************************************/ | |
1763 | ||
1764 | static void stl_waituntilsent(struct tty_struct *tty, int timeout) | |
1765 | { | |
1766 | stlport_t *portp; | |
1767 | unsigned long tend; | |
1768 | ||
1769 | #ifdef DEBUG | |
1770 | printk("stl_waituntilsent(tty=%x,timeout=%d)\n", (int) tty, timeout); | |
1771 | #endif | |
1772 | ||
1773 | if (tty == (struct tty_struct *) NULL) | |
1774 | return; | |
1775 | portp = tty->driver_data; | |
1776 | if (portp == (stlport_t *) NULL) | |
1777 | return; | |
1778 | ||
1779 | if (timeout == 0) | |
1780 | timeout = HZ; | |
1781 | tend = jiffies + timeout; | |
1782 | ||
1783 | while (stl_datastate(portp)) { | |
1784 | if (signal_pending(current)) | |
1785 | break; | |
1786 | msleep_interruptible(20); | |
1787 | if (time_after_eq(jiffies, tend)) | |
1788 | break; | |
1789 | } | |
1790 | } | |
1791 | ||
1792 | /*****************************************************************************/ | |
1793 | ||
1794 | static void stl_sendxchar(struct tty_struct *tty, char ch) | |
1795 | { | |
1796 | stlport_t *portp; | |
1797 | ||
1798 | #ifdef DEBUG | |
1799 | printk("stl_sendxchar(tty=%x,ch=%x)\n", (int) tty, ch); | |
1800 | #endif | |
1801 | ||
1802 | if (tty == (struct tty_struct *) NULL) | |
1803 | return; | |
1804 | portp = tty->driver_data; | |
1805 | if (portp == (stlport_t *) NULL) | |
1806 | return; | |
1807 | ||
1808 | if (ch == STOP_CHAR(tty)) | |
1809 | stl_sendflow(portp, 0); | |
1810 | else if (ch == START_CHAR(tty)) | |
1811 | stl_sendflow(portp, 1); | |
1812 | else | |
1813 | stl_putchar(tty, ch); | |
1814 | } | |
1815 | ||
1816 | /*****************************************************************************/ | |
1817 | ||
1818 | #define MAXLINE 80 | |
1819 | ||
1820 | /* | |
1821 | * Format info for a specified port. The line is deliberately limited | |
1822 | * to 80 characters. (If it is too long it will be truncated, if too | |
1823 | * short then padded with spaces). | |
1824 | */ | |
1825 | ||
1826 | static int stl_portinfo(stlport_t *portp, int portnr, char *pos) | |
1827 | { | |
1828 | char *sp; | |
1829 | int sigs, cnt; | |
1830 | ||
1831 | sp = pos; | |
1832 | sp += sprintf(sp, "%d: uart:%s tx:%d rx:%d", | |
1833 | portnr, (portp->hwid == 1) ? "SC26198" : "CD1400", | |
1834 | (int) portp->stats.txtotal, (int) portp->stats.rxtotal); | |
1835 | ||
1836 | if (portp->stats.rxframing) | |
1837 | sp += sprintf(sp, " fe:%d", (int) portp->stats.rxframing); | |
1838 | if (portp->stats.rxparity) | |
1839 | sp += sprintf(sp, " pe:%d", (int) portp->stats.rxparity); | |
1840 | if (portp->stats.rxbreaks) | |
1841 | sp += sprintf(sp, " brk:%d", (int) portp->stats.rxbreaks); | |
1842 | if (portp->stats.rxoverrun) | |
1843 | sp += sprintf(sp, " oe:%d", (int) portp->stats.rxoverrun); | |
1844 | ||
1845 | sigs = stl_getsignals(portp); | |
1846 | cnt = sprintf(sp, "%s%s%s%s%s ", | |
1847 | (sigs & TIOCM_RTS) ? "|RTS" : "", | |
1848 | (sigs & TIOCM_CTS) ? "|CTS" : "", | |
1849 | (sigs & TIOCM_DTR) ? "|DTR" : "", | |
1850 | (sigs & TIOCM_CD) ? "|DCD" : "", | |
1851 | (sigs & TIOCM_DSR) ? "|DSR" : ""); | |
1852 | *sp = ' '; | |
1853 | sp += cnt; | |
1854 | ||
1855 | for (cnt = (sp - pos); (cnt < (MAXLINE - 1)); cnt++) | |
1856 | *sp++ = ' '; | |
1857 | if (cnt >= MAXLINE) | |
1858 | pos[(MAXLINE - 2)] = '+'; | |
1859 | pos[(MAXLINE - 1)] = '\n'; | |
1860 | ||
014c2544 | 1861 | return MAXLINE; |
1da177e4 LT |
1862 | } |
1863 | ||
1864 | /*****************************************************************************/ | |
1865 | ||
1866 | /* | |
1867 | * Port info, read from the /proc file system. | |
1868 | */ | |
1869 | ||
1870 | static int stl_readproc(char *page, char **start, off_t off, int count, int *eof, void *data) | |
1871 | { | |
1872 | stlbrd_t *brdp; | |
1873 | stlpanel_t *panelp; | |
1874 | stlport_t *portp; | |
1875 | int brdnr, panelnr, portnr, totalport; | |
1876 | int curoff, maxoff; | |
1877 | char *pos; | |
1878 | ||
1879 | #ifdef DEBUG | |
1880 | printk("stl_readproc(page=%x,start=%x,off=%x,count=%d,eof=%x," | |
1881 | "data=%x\n", (int) page, (int) start, (int) off, count, | |
1882 | (int) eof, (int) data); | |
1883 | #endif | |
1884 | ||
1885 | pos = page; | |
1886 | totalport = 0; | |
1887 | curoff = 0; | |
1888 | ||
1889 | if (off == 0) { | |
1890 | pos += sprintf(pos, "%s: version %s", stl_drvtitle, | |
1891 | stl_drvversion); | |
1892 | while (pos < (page + MAXLINE - 1)) | |
1893 | *pos++ = ' '; | |
1894 | *pos++ = '\n'; | |
1895 | } | |
1896 | curoff = MAXLINE; | |
1897 | ||
1898 | /* | |
1899 | * We scan through for each board, panel and port. The offset is | |
1900 | * calculated on the fly, and irrelevant ports are skipped. | |
1901 | */ | |
1902 | for (brdnr = 0; (brdnr < stl_nrbrds); brdnr++) { | |
1903 | brdp = stl_brds[brdnr]; | |
1904 | if (brdp == (stlbrd_t *) NULL) | |
1905 | continue; | |
1906 | if (brdp->state == 0) | |
1907 | continue; | |
1908 | ||
1909 | maxoff = curoff + (brdp->nrports * MAXLINE); | |
1910 | if (off >= maxoff) { | |
1911 | curoff = maxoff; | |
1912 | continue; | |
1913 | } | |
1914 | ||
1915 | totalport = brdnr * STL_MAXPORTS; | |
1916 | for (panelnr = 0; (panelnr < brdp->nrpanels); panelnr++) { | |
1917 | panelp = brdp->panels[panelnr]; | |
1918 | if (panelp == (stlpanel_t *) NULL) | |
1919 | continue; | |
1920 | ||
1921 | maxoff = curoff + (panelp->nrports * MAXLINE); | |
1922 | if (off >= maxoff) { | |
1923 | curoff = maxoff; | |
1924 | totalport += panelp->nrports; | |
1925 | continue; | |
1926 | } | |
1927 | ||
1928 | for (portnr = 0; (portnr < panelp->nrports); portnr++, | |
1929 | totalport++) { | |
1930 | portp = panelp->ports[portnr]; | |
1931 | if (portp == (stlport_t *) NULL) | |
1932 | continue; | |
1933 | if (off >= (curoff += MAXLINE)) | |
1934 | continue; | |
1935 | if ((pos - page + MAXLINE) > count) | |
1936 | goto stl_readdone; | |
1937 | pos += stl_portinfo(portp, totalport, pos); | |
1938 | } | |
1939 | } | |
1940 | } | |
1941 | ||
1942 | *eof = 1; | |
1943 | ||
1944 | stl_readdone: | |
1945 | *start = page; | |
014c2544 | 1946 | return (pos - page); |
1da177e4 LT |
1947 | } |
1948 | ||
1949 | /*****************************************************************************/ | |
1950 | ||
1951 | /* | |
1952 | * All board interrupts are vectored through here first. This code then | |
1953 | * calls off to the approrpriate board interrupt handlers. | |
1954 | */ | |
1955 | ||
1956 | static irqreturn_t stl_intr(int irq, void *dev_id, struct pt_regs *regs) | |
1957 | { | |
1958 | stlbrd_t *brdp = (stlbrd_t *) dev_id; | |
1959 | ||
1960 | #ifdef DEBUG | |
1961 | printk("stl_intr(brdp=%x,irq=%d,regs=%x)\n", (int) brdp, irq, | |
1962 | (int) regs); | |
1963 | #endif | |
1964 | ||
1965 | return IRQ_RETVAL((* brdp->isr)(brdp)); | |
1966 | } | |
1967 | ||
1968 | /*****************************************************************************/ | |
1969 | ||
1970 | /* | |
1971 | * Interrupt service routine for EasyIO board types. | |
1972 | */ | |
1973 | ||
1974 | static int stl_eiointr(stlbrd_t *brdp) | |
1975 | { | |
1976 | stlpanel_t *panelp; | |
1977 | unsigned int iobase; | |
1978 | int handled = 0; | |
1979 | ||
1980 | panelp = brdp->panels[0]; | |
1981 | iobase = panelp->iobase; | |
1982 | while (inb(brdp->iostatus) & EIO_INTRPEND) { | |
1983 | handled = 1; | |
1984 | (* panelp->isr)(panelp, iobase); | |
1985 | } | |
1986 | return handled; | |
1987 | } | |
1988 | ||
1989 | /*****************************************************************************/ | |
1990 | ||
1991 | /* | |
1992 | * Interrupt service routine for ECH-AT board types. | |
1993 | */ | |
1994 | ||
1995 | static int stl_echatintr(stlbrd_t *brdp) | |
1996 | { | |
1997 | stlpanel_t *panelp; | |
1998 | unsigned int ioaddr; | |
1999 | int bnknr; | |
2000 | int handled = 0; | |
2001 | ||
2002 | outb((brdp->ioctrlval | ECH_BRDENABLE), brdp->ioctrl); | |
2003 | ||
2004 | while (inb(brdp->iostatus) & ECH_INTRPEND) { | |
2005 | handled = 1; | |
2006 | for (bnknr = 0; (bnknr < brdp->nrbnks); bnknr++) { | |
2007 | ioaddr = brdp->bnkstataddr[bnknr]; | |
2008 | if (inb(ioaddr) & ECH_PNLINTRPEND) { | |
2009 | panelp = brdp->bnk2panel[bnknr]; | |
2010 | (* panelp->isr)(panelp, (ioaddr & 0xfffc)); | |
2011 | } | |
2012 | } | |
2013 | } | |
2014 | ||
2015 | outb((brdp->ioctrlval | ECH_BRDDISABLE), brdp->ioctrl); | |
2016 | ||
2017 | return handled; | |
2018 | } | |
2019 | ||
2020 | /*****************************************************************************/ | |
2021 | ||
2022 | /* | |
2023 | * Interrupt service routine for ECH-MCA board types. | |
2024 | */ | |
2025 | ||
2026 | static int stl_echmcaintr(stlbrd_t *brdp) | |
2027 | { | |
2028 | stlpanel_t *panelp; | |
2029 | unsigned int ioaddr; | |
2030 | int bnknr; | |
2031 | int handled = 0; | |
2032 | ||
2033 | while (inb(brdp->iostatus) & ECH_INTRPEND) { | |
2034 | handled = 1; | |
2035 | for (bnknr = 0; (bnknr < brdp->nrbnks); bnknr++) { | |
2036 | ioaddr = brdp->bnkstataddr[bnknr]; | |
2037 | if (inb(ioaddr) & ECH_PNLINTRPEND) { | |
2038 | panelp = brdp->bnk2panel[bnknr]; | |
2039 | (* panelp->isr)(panelp, (ioaddr & 0xfffc)); | |
2040 | } | |
2041 | } | |
2042 | } | |
2043 | return handled; | |
2044 | } | |
2045 | ||
2046 | /*****************************************************************************/ | |
2047 | ||
2048 | /* | |
2049 | * Interrupt service routine for ECH-PCI board types. | |
2050 | */ | |
2051 | ||
2052 | static int stl_echpciintr(stlbrd_t *brdp) | |
2053 | { | |
2054 | stlpanel_t *panelp; | |
2055 | unsigned int ioaddr; | |
2056 | int bnknr, recheck; | |
2057 | int handled = 0; | |
2058 | ||
2059 | while (1) { | |
2060 | recheck = 0; | |
2061 | for (bnknr = 0; (bnknr < brdp->nrbnks); bnknr++) { | |
2062 | outb(brdp->bnkpageaddr[bnknr], brdp->ioctrl); | |
2063 | ioaddr = brdp->bnkstataddr[bnknr]; | |
2064 | if (inb(ioaddr) & ECH_PNLINTRPEND) { | |
2065 | panelp = brdp->bnk2panel[bnknr]; | |
2066 | (* panelp->isr)(panelp, (ioaddr & 0xfffc)); | |
2067 | recheck++; | |
2068 | handled = 1; | |
2069 | } | |
2070 | } | |
2071 | if (! recheck) | |
2072 | break; | |
2073 | } | |
2074 | return handled; | |
2075 | } | |
2076 | ||
2077 | /*****************************************************************************/ | |
2078 | ||
2079 | /* | |
2080 | * Interrupt service routine for ECH-8/64-PCI board types. | |
2081 | */ | |
2082 | ||
2083 | static int stl_echpci64intr(stlbrd_t *brdp) | |
2084 | { | |
2085 | stlpanel_t *panelp; | |
2086 | unsigned int ioaddr; | |
2087 | int bnknr; | |
2088 | int handled = 0; | |
2089 | ||
2090 | while (inb(brdp->ioctrl) & 0x1) { | |
2091 | handled = 1; | |
2092 | for (bnknr = 0; (bnknr < brdp->nrbnks); bnknr++) { | |
2093 | ioaddr = brdp->bnkstataddr[bnknr]; | |
2094 | if (inb(ioaddr) & ECH_PNLINTRPEND) { | |
2095 | panelp = brdp->bnk2panel[bnknr]; | |
2096 | (* panelp->isr)(panelp, (ioaddr & 0xfffc)); | |
2097 | } | |
2098 | } | |
2099 | } | |
2100 | ||
2101 | return handled; | |
2102 | } | |
2103 | ||
2104 | /*****************************************************************************/ | |
2105 | ||
2106 | /* | |
2107 | * Service an off-level request for some channel. | |
2108 | */ | |
2109 | static void stl_offintr(void *private) | |
2110 | { | |
2111 | stlport_t *portp; | |
2112 | struct tty_struct *tty; | |
2113 | unsigned int oldsigs; | |
2114 | ||
2115 | portp = private; | |
2116 | ||
2117 | #ifdef DEBUG | |
2118 | printk("stl_offintr(portp=%x)\n", (int) portp); | |
2119 | #endif | |
2120 | ||
2121 | if (portp == (stlport_t *) NULL) | |
2122 | return; | |
2123 | ||
2124 | tty = portp->tty; | |
2125 | if (tty == (struct tty_struct *) NULL) | |
2126 | return; | |
2127 | ||
2128 | lock_kernel(); | |
2129 | if (test_bit(ASYI_TXLOW, &portp->istate)) { | |
2130 | tty_wakeup(tty); | |
2131 | } | |
2132 | if (test_bit(ASYI_DCDCHANGE, &portp->istate)) { | |
2133 | clear_bit(ASYI_DCDCHANGE, &portp->istate); | |
2134 | oldsigs = portp->sigs; | |
2135 | portp->sigs = stl_getsignals(portp); | |
2136 | if ((portp->sigs & TIOCM_CD) && ((oldsigs & TIOCM_CD) == 0)) | |
2137 | wake_up_interruptible(&portp->open_wait); | |
2138 | if ((oldsigs & TIOCM_CD) && ((portp->sigs & TIOCM_CD) == 0)) { | |
2139 | if (portp->flags & ASYNC_CHECK_CD) | |
2140 | tty_hangup(tty); /* FIXME: module removal race here - AKPM */ | |
2141 | } | |
2142 | } | |
2143 | unlock_kernel(); | |
2144 | } | |
2145 | ||
2146 | /*****************************************************************************/ | |
2147 | ||
2148 | /* | |
2149 | * Initialize all the ports on a panel. | |
2150 | */ | |
2151 | ||
2152 | static int __init stl_initports(stlbrd_t *brdp, stlpanel_t *panelp) | |
2153 | { | |
2154 | stlport_t *portp; | |
2155 | int chipmask, i; | |
2156 | ||
2157 | #ifdef DEBUG | |
2158 | printk("stl_initports(brdp=%x,panelp=%x)\n", (int) brdp, (int) panelp); | |
2159 | #endif | |
2160 | ||
2161 | chipmask = stl_panelinit(brdp, panelp); | |
2162 | ||
2163 | /* | |
2164 | * All UART's are initialized (if found!). Now go through and setup | |
2165 | * each ports data structures. | |
2166 | */ | |
2167 | for (i = 0; (i < panelp->nrports); i++) { | |
b0b4ed72 TK |
2168 | portp = kzalloc(sizeof(stlport_t), GFP_KERNEL); |
2169 | if (!portp) { | |
1da177e4 LT |
2170 | printk("STALLION: failed to allocate memory " |
2171 | "(size=%d)\n", sizeof(stlport_t)); | |
2172 | break; | |
2173 | } | |
1da177e4 LT |
2174 | |
2175 | portp->magic = STL_PORTMAGIC; | |
2176 | portp->portnr = i; | |
2177 | portp->brdnr = panelp->brdnr; | |
2178 | portp->panelnr = panelp->panelnr; | |
2179 | portp->uartp = panelp->uartp; | |
2180 | portp->clk = brdp->clk; | |
2181 | portp->baud_base = STL_BAUDBASE; | |
2182 | portp->close_delay = STL_CLOSEDELAY; | |
2183 | portp->closing_wait = 30 * HZ; | |
2184 | INIT_WORK(&portp->tqueue, stl_offintr, portp); | |
2185 | init_waitqueue_head(&portp->open_wait); | |
2186 | init_waitqueue_head(&portp->close_wait); | |
2187 | portp->stats.brd = portp->brdnr; | |
2188 | portp->stats.panel = portp->panelnr; | |
2189 | portp->stats.port = portp->portnr; | |
2190 | panelp->ports[i] = portp; | |
2191 | stl_portinit(brdp, panelp, portp); | |
2192 | } | |
2193 | ||
2194 | return(0); | |
2195 | } | |
2196 | ||
2197 | /*****************************************************************************/ | |
2198 | ||
2199 | /* | |
2200 | * Try to find and initialize an EasyIO board. | |
2201 | */ | |
2202 | ||
2203 | static inline int stl_initeio(stlbrd_t *brdp) | |
2204 | { | |
2205 | stlpanel_t *panelp; | |
2206 | unsigned int status; | |
2207 | char *name; | |
2208 | int rc; | |
2209 | ||
2210 | #ifdef DEBUG | |
2211 | printk("stl_initeio(brdp=%x)\n", (int) brdp); | |
2212 | #endif | |
2213 | ||
2214 | brdp->ioctrl = brdp->ioaddr1 + 1; | |
2215 | brdp->iostatus = brdp->ioaddr1 + 2; | |
2216 | ||
2217 | status = inb(brdp->iostatus); | |
2218 | if ((status & EIO_IDBITMASK) == EIO_MK3) | |
2219 | brdp->ioctrl++; | |
2220 | ||
2221 | /* | |
2222 | * Handle board specific stuff now. The real difference is PCI | |
2223 | * or not PCI. | |
2224 | */ | |
2225 | if (brdp->brdtype == BRD_EASYIOPCI) { | |
2226 | brdp->iosize1 = 0x80; | |
2227 | brdp->iosize2 = 0x80; | |
2228 | name = "serial(EIO-PCI)"; | |
2229 | outb(0x41, (brdp->ioaddr2 + 0x4c)); | |
2230 | } else { | |
2231 | brdp->iosize1 = 8; | |
2232 | name = "serial(EIO)"; | |
2233 | if ((brdp->irq < 0) || (brdp->irq > 15) || | |
2234 | (stl_vecmap[brdp->irq] == (unsigned char) 0xff)) { | |
2235 | printk("STALLION: invalid irq=%d for brd=%d\n", | |
2236 | brdp->irq, brdp->brdnr); | |
2237 | return(-EINVAL); | |
2238 | } | |
2239 | outb((stl_vecmap[brdp->irq] | EIO_0WS | | |
2240 | ((brdp->irqtype) ? EIO_INTLEVEL : EIO_INTEDGE)), | |
2241 | brdp->ioctrl); | |
2242 | } | |
2243 | ||
2244 | if (!request_region(brdp->ioaddr1, brdp->iosize1, name)) { | |
2245 | printk(KERN_WARNING "STALLION: Warning, board %d I/O address " | |
2246 | "%x conflicts with another device\n", brdp->brdnr, | |
2247 | brdp->ioaddr1); | |
2248 | return(-EBUSY); | |
2249 | } | |
2250 | ||
2251 | if (brdp->iosize2 > 0) | |
2252 | if (!request_region(brdp->ioaddr2, brdp->iosize2, name)) { | |
2253 | printk(KERN_WARNING "STALLION: Warning, board %d I/O " | |
2254 | "address %x conflicts with another device\n", | |
2255 | brdp->brdnr, brdp->ioaddr2); | |
2256 | printk(KERN_WARNING "STALLION: Warning, also " | |
2257 | "releasing board %d I/O address %x \n", | |
2258 | brdp->brdnr, brdp->ioaddr1); | |
2259 | release_region(brdp->ioaddr1, brdp->iosize1); | |
2260 | return(-EBUSY); | |
2261 | } | |
2262 | ||
2263 | /* | |
2264 | * Everything looks OK, so let's go ahead and probe for the hardware. | |
2265 | */ | |
2266 | brdp->clk = CD1400_CLK; | |
2267 | brdp->isr = stl_eiointr; | |
2268 | ||
2269 | switch (status & EIO_IDBITMASK) { | |
2270 | case EIO_8PORTM: | |
2271 | brdp->clk = CD1400_CLK8M; | |
2272 | /* fall thru */ | |
2273 | case EIO_8PORTRS: | |
2274 | case EIO_8PORTDI: | |
2275 | brdp->nrports = 8; | |
2276 | break; | |
2277 | case EIO_4PORTRS: | |
2278 | brdp->nrports = 4; | |
2279 | break; | |
2280 | case EIO_MK3: | |
2281 | switch (status & EIO_BRDMASK) { | |
2282 | case ID_BRD4: | |
2283 | brdp->nrports = 4; | |
2284 | break; | |
2285 | case ID_BRD8: | |
2286 | brdp->nrports = 8; | |
2287 | break; | |
2288 | case ID_BRD16: | |
2289 | brdp->nrports = 16; | |
2290 | break; | |
2291 | default: | |
2292 | return(-ENODEV); | |
2293 | } | |
2294 | break; | |
2295 | default: | |
2296 | return(-ENODEV); | |
2297 | } | |
2298 | ||
2299 | /* | |
2300 | * We have verified that the board is actually present, so now we | |
2301 | * can complete the setup. | |
2302 | */ | |
2303 | ||
b0b4ed72 TK |
2304 | panelp = kzalloc(sizeof(stlpanel_t), GFP_KERNEL); |
2305 | if (!panelp) { | |
1da177e4 LT |
2306 | printk(KERN_WARNING "STALLION: failed to allocate memory " |
2307 | "(size=%d)\n", sizeof(stlpanel_t)); | |
b0b4ed72 | 2308 | return -ENOMEM; |
1da177e4 | 2309 | } |
1da177e4 LT |
2310 | |
2311 | panelp->magic = STL_PANELMAGIC; | |
2312 | panelp->brdnr = brdp->brdnr; | |
2313 | panelp->panelnr = 0; | |
2314 | panelp->nrports = brdp->nrports; | |
2315 | panelp->iobase = brdp->ioaddr1; | |
2316 | panelp->hwid = status; | |
2317 | if ((status & EIO_IDBITMASK) == EIO_MK3) { | |
2318 | panelp->uartp = (void *) &stl_sc26198uart; | |
2319 | panelp->isr = stl_sc26198intr; | |
2320 | } else { | |
2321 | panelp->uartp = (void *) &stl_cd1400uart; | |
2322 | panelp->isr = stl_cd1400eiointr; | |
2323 | } | |
2324 | ||
2325 | brdp->panels[0] = panelp; | |
2326 | brdp->nrpanels = 1; | |
2327 | brdp->state |= BRD_FOUND; | |
2328 | brdp->hwid = status; | |
2329 | if (request_irq(brdp->irq, stl_intr, SA_SHIRQ, name, brdp) != 0) { | |
2330 | printk("STALLION: failed to register interrupt " | |
2331 | "routine for %s irq=%d\n", name, brdp->irq); | |
2332 | rc = -ENODEV; | |
2333 | } else { | |
2334 | rc = 0; | |
2335 | } | |
014c2544 | 2336 | return rc; |
1da177e4 LT |
2337 | } |
2338 | ||
2339 | /*****************************************************************************/ | |
2340 | ||
2341 | /* | |
2342 | * Try to find an ECH board and initialize it. This code is capable of | |
2343 | * dealing with all types of ECH board. | |
2344 | */ | |
2345 | ||
2346 | static inline int stl_initech(stlbrd_t *brdp) | |
2347 | { | |
2348 | stlpanel_t *panelp; | |
2349 | unsigned int status, nxtid, ioaddr, conflict; | |
2350 | int panelnr, banknr, i; | |
2351 | char *name; | |
2352 | ||
2353 | #ifdef DEBUG | |
2354 | printk("stl_initech(brdp=%x)\n", (int) brdp); | |
2355 | #endif | |
2356 | ||
2357 | status = 0; | |
2358 | conflict = 0; | |
2359 | ||
2360 | /* | |
2361 | * Set up the initial board register contents for boards. This varies a | |
2362 | * bit between the different board types. So we need to handle each | |
2363 | * separately. Also do a check that the supplied IRQ is good. | |
2364 | */ | |
2365 | switch (brdp->brdtype) { | |
2366 | ||
2367 | case BRD_ECH: | |
2368 | brdp->isr = stl_echatintr; | |
2369 | brdp->ioctrl = brdp->ioaddr1 + 1; | |
2370 | brdp->iostatus = brdp->ioaddr1 + 1; | |
2371 | status = inb(brdp->iostatus); | |
2372 | if ((status & ECH_IDBITMASK) != ECH_ID) | |
2373 | return(-ENODEV); | |
2374 | if ((brdp->irq < 0) || (brdp->irq > 15) || | |
2375 | (stl_vecmap[brdp->irq] == (unsigned char) 0xff)) { | |
2376 | printk("STALLION: invalid irq=%d for brd=%d\n", | |
2377 | brdp->irq, brdp->brdnr); | |
2378 | return(-EINVAL); | |
2379 | } | |
2380 | status = ((brdp->ioaddr2 & ECH_ADDR2MASK) >> 1); | |
2381 | status |= (stl_vecmap[brdp->irq] << 1); | |
2382 | outb((status | ECH_BRDRESET), brdp->ioaddr1); | |
2383 | brdp->ioctrlval = ECH_INTENABLE | | |
2384 | ((brdp->irqtype) ? ECH_INTLEVEL : ECH_INTEDGE); | |
2385 | for (i = 0; (i < 10); i++) | |
2386 | outb((brdp->ioctrlval | ECH_BRDENABLE), brdp->ioctrl); | |
2387 | brdp->iosize1 = 2; | |
2388 | brdp->iosize2 = 32; | |
2389 | name = "serial(EC8/32)"; | |
2390 | outb(status, brdp->ioaddr1); | |
2391 | break; | |
2392 | ||
2393 | case BRD_ECHMC: | |
2394 | brdp->isr = stl_echmcaintr; | |
2395 | brdp->ioctrl = brdp->ioaddr1 + 0x20; | |
2396 | brdp->iostatus = brdp->ioctrl; | |
2397 | status = inb(brdp->iostatus); | |
2398 | if ((status & ECH_IDBITMASK) != ECH_ID) | |
2399 | return(-ENODEV); | |
2400 | if ((brdp->irq < 0) || (brdp->irq > 15) || | |
2401 | (stl_vecmap[brdp->irq] == (unsigned char) 0xff)) { | |
2402 | printk("STALLION: invalid irq=%d for brd=%d\n", | |
2403 | brdp->irq, brdp->brdnr); | |
2404 | return(-EINVAL); | |
2405 | } | |
2406 | outb(ECHMC_BRDRESET, brdp->ioctrl); | |
2407 | outb(ECHMC_INTENABLE, brdp->ioctrl); | |
2408 | brdp->iosize1 = 64; | |
2409 | name = "serial(EC8/32-MC)"; | |
2410 | break; | |
2411 | ||
2412 | case BRD_ECHPCI: | |
2413 | brdp->isr = stl_echpciintr; | |
2414 | brdp->ioctrl = brdp->ioaddr1 + 2; | |
2415 | brdp->iosize1 = 4; | |
2416 | brdp->iosize2 = 8; | |
2417 | name = "serial(EC8/32-PCI)"; | |
2418 | break; | |
2419 | ||
2420 | case BRD_ECH64PCI: | |
2421 | brdp->isr = stl_echpci64intr; | |
2422 | brdp->ioctrl = brdp->ioaddr2 + 0x40; | |
2423 | outb(0x43, (brdp->ioaddr1 + 0x4c)); | |
2424 | brdp->iosize1 = 0x80; | |
2425 | brdp->iosize2 = 0x80; | |
2426 | name = "serial(EC8/64-PCI)"; | |
2427 | break; | |
2428 | ||
2429 | default: | |
2430 | printk("STALLION: unknown board type=%d\n", brdp->brdtype); | |
2431 | return(-EINVAL); | |
2432 | break; | |
2433 | } | |
2434 | ||
2435 | /* | |
2436 | * Check boards for possible IO address conflicts and return fail status | |
2437 | * if an IO conflict found. | |
2438 | */ | |
2439 | if (!request_region(brdp->ioaddr1, brdp->iosize1, name)) { | |
2440 | printk(KERN_WARNING "STALLION: Warning, board %d I/O address " | |
2441 | "%x conflicts with another device\n", brdp->brdnr, | |
2442 | brdp->ioaddr1); | |
2443 | return(-EBUSY); | |
2444 | } | |
2445 | ||
2446 | if (brdp->iosize2 > 0) | |
2447 | if (!request_region(brdp->ioaddr2, brdp->iosize2, name)) { | |
2448 | printk(KERN_WARNING "STALLION: Warning, board %d I/O " | |
2449 | "address %x conflicts with another device\n", | |
2450 | brdp->brdnr, brdp->ioaddr2); | |
2451 | printk(KERN_WARNING "STALLION: Warning, also " | |
2452 | "releasing board %d I/O address %x \n", | |
2453 | brdp->brdnr, brdp->ioaddr1); | |
2454 | release_region(brdp->ioaddr1, brdp->iosize1); | |
2455 | return(-EBUSY); | |
2456 | } | |
2457 | ||
2458 | /* | |
2459 | * Scan through the secondary io address space looking for panels. | |
2460 | * As we find'em allocate and initialize panel structures for each. | |
2461 | */ | |
2462 | brdp->clk = CD1400_CLK; | |
2463 | brdp->hwid = status; | |
2464 | ||
2465 | ioaddr = brdp->ioaddr2; | |
2466 | banknr = 0; | |
2467 | panelnr = 0; | |
2468 | nxtid = 0; | |
2469 | ||
2470 | for (i = 0; (i < STL_MAXPANELS); i++) { | |
2471 | if (brdp->brdtype == BRD_ECHPCI) { | |
2472 | outb(nxtid, brdp->ioctrl); | |
2473 | ioaddr = brdp->ioaddr2; | |
2474 | } | |
2475 | status = inb(ioaddr + ECH_PNLSTATUS); | |
2476 | if ((status & ECH_PNLIDMASK) != nxtid) | |
2477 | break; | |
b0b4ed72 TK |
2478 | panelp = kzalloc(sizeof(stlpanel_t), GFP_KERNEL); |
2479 | if (!panelp) { | |
1da177e4 LT |
2480 | printk("STALLION: failed to allocate memory " |
2481 | "(size=%d)\n", sizeof(stlpanel_t)); | |
2482 | break; | |
2483 | } | |
1da177e4 LT |
2484 | panelp->magic = STL_PANELMAGIC; |
2485 | panelp->brdnr = brdp->brdnr; | |
2486 | panelp->panelnr = panelnr; | |
2487 | panelp->iobase = ioaddr; | |
2488 | panelp->pagenr = nxtid; | |
2489 | panelp->hwid = status; | |
2490 | brdp->bnk2panel[banknr] = panelp; | |
2491 | brdp->bnkpageaddr[banknr] = nxtid; | |
2492 | brdp->bnkstataddr[banknr++] = ioaddr + ECH_PNLSTATUS; | |
2493 | ||
2494 | if (status & ECH_PNLXPID) { | |
2495 | panelp->uartp = (void *) &stl_sc26198uart; | |
2496 | panelp->isr = stl_sc26198intr; | |
2497 | if (status & ECH_PNL16PORT) { | |
2498 | panelp->nrports = 16; | |
2499 | brdp->bnk2panel[banknr] = panelp; | |
2500 | brdp->bnkpageaddr[banknr] = nxtid; | |
2501 | brdp->bnkstataddr[banknr++] = ioaddr + 4 + | |
2502 | ECH_PNLSTATUS; | |
2503 | } else { | |
2504 | panelp->nrports = 8; | |
2505 | } | |
2506 | } else { | |
2507 | panelp->uartp = (void *) &stl_cd1400uart; | |
2508 | panelp->isr = stl_cd1400echintr; | |
2509 | if (status & ECH_PNL16PORT) { | |
2510 | panelp->nrports = 16; | |
2511 | panelp->ackmask = 0x80; | |
2512 | if (brdp->brdtype != BRD_ECHPCI) | |
2513 | ioaddr += EREG_BANKSIZE; | |
2514 | brdp->bnk2panel[banknr] = panelp; | |
2515 | brdp->bnkpageaddr[banknr] = ++nxtid; | |
2516 | brdp->bnkstataddr[banknr++] = ioaddr + | |
2517 | ECH_PNLSTATUS; | |
2518 | } else { | |
2519 | panelp->nrports = 8; | |
2520 | panelp->ackmask = 0xc0; | |
2521 | } | |
2522 | } | |
2523 | ||
2524 | nxtid++; | |
2525 | ioaddr += EREG_BANKSIZE; | |
2526 | brdp->nrports += panelp->nrports; | |
2527 | brdp->panels[panelnr++] = panelp; | |
2528 | if ((brdp->brdtype != BRD_ECHPCI) && | |
2529 | (ioaddr >= (brdp->ioaddr2 + brdp->iosize2))) | |
2530 | break; | |
2531 | } | |
2532 | ||
2533 | brdp->nrpanels = panelnr; | |
2534 | brdp->nrbnks = banknr; | |
2535 | if (brdp->brdtype == BRD_ECH) | |
2536 | outb((brdp->ioctrlval | ECH_BRDDISABLE), brdp->ioctrl); | |
2537 | ||
2538 | brdp->state |= BRD_FOUND; | |
2539 | if (request_irq(brdp->irq, stl_intr, SA_SHIRQ, name, brdp) != 0) { | |
2540 | printk("STALLION: failed to register interrupt " | |
2541 | "routine for %s irq=%d\n", name, brdp->irq); | |
2542 | i = -ENODEV; | |
2543 | } else { | |
2544 | i = 0; | |
2545 | } | |
2546 | ||
2547 | return(i); | |
2548 | } | |
2549 | ||
2550 | /*****************************************************************************/ | |
2551 | ||
2552 | /* | |
2553 | * Initialize and configure the specified board. | |
2554 | * Scan through all the boards in the configuration and see what we | |
2555 | * can find. Handle EIO and the ECH boards a little differently here | |
2556 | * since the initial search and setup is very different. | |
2557 | */ | |
2558 | ||
2559 | static int __init stl_brdinit(stlbrd_t *brdp) | |
2560 | { | |
2561 | int i; | |
2562 | ||
2563 | #ifdef DEBUG | |
2564 | printk("stl_brdinit(brdp=%x)\n", (int) brdp); | |
2565 | #endif | |
2566 | ||
2567 | switch (brdp->brdtype) { | |
2568 | case BRD_EASYIO: | |
2569 | case BRD_EASYIOPCI: | |
2570 | stl_initeio(brdp); | |
2571 | break; | |
2572 | case BRD_ECH: | |
2573 | case BRD_ECHMC: | |
2574 | case BRD_ECHPCI: | |
2575 | case BRD_ECH64PCI: | |
2576 | stl_initech(brdp); | |
2577 | break; | |
2578 | default: | |
2579 | printk("STALLION: board=%d is unknown board type=%d\n", | |
2580 | brdp->brdnr, brdp->brdtype); | |
2581 | return(ENODEV); | |
2582 | } | |
2583 | ||
2584 | stl_brds[brdp->brdnr] = brdp; | |
2585 | if ((brdp->state & BRD_FOUND) == 0) { | |
2586 | printk("STALLION: %s board not found, board=%d io=%x irq=%d\n", | |
2587 | stl_brdnames[brdp->brdtype], brdp->brdnr, | |
2588 | brdp->ioaddr1, brdp->irq); | |
2589 | return(ENODEV); | |
2590 | } | |
2591 | ||
2592 | for (i = 0; (i < STL_MAXPANELS); i++) | |
2593 | if (brdp->panels[i] != (stlpanel_t *) NULL) | |
2594 | stl_initports(brdp, brdp->panels[i]); | |
2595 | ||
2596 | printk("STALLION: %s found, board=%d io=%x irq=%d " | |
2597 | "nrpanels=%d nrports=%d\n", stl_brdnames[brdp->brdtype], | |
2598 | brdp->brdnr, brdp->ioaddr1, brdp->irq, brdp->nrpanels, | |
2599 | brdp->nrports); | |
2600 | return(0); | |
2601 | } | |
2602 | ||
2603 | /*****************************************************************************/ | |
2604 | ||
2605 | /* | |
2606 | * Find the next available board number that is free. | |
2607 | */ | |
2608 | ||
2609 | static inline int stl_getbrdnr(void) | |
2610 | { | |
2611 | int i; | |
2612 | ||
2613 | for (i = 0; (i < STL_MAXBRDS); i++) { | |
2614 | if (stl_brds[i] == (stlbrd_t *) NULL) { | |
2615 | if (i >= stl_nrbrds) | |
2616 | stl_nrbrds = i + 1; | |
2617 | return(i); | |
2618 | } | |
2619 | } | |
2620 | return(-1); | |
2621 | } | |
2622 | ||
2623 | /*****************************************************************************/ | |
2624 | ||
2625 | #ifdef CONFIG_PCI | |
2626 | ||
2627 | /* | |
2628 | * We have a Stallion board. Allocate a board structure and | |
2629 | * initialize it. Read its IO and IRQ resources from PCI | |
2630 | * configuration space. | |
2631 | */ | |
2632 | ||
2633 | static inline int stl_initpcibrd(int brdtype, struct pci_dev *devp) | |
2634 | { | |
2635 | stlbrd_t *brdp; | |
2636 | ||
2637 | #ifdef DEBUG | |
2638 | printk("stl_initpcibrd(brdtype=%d,busnr=%x,devnr=%x)\n", brdtype, | |
2639 | devp->bus->number, devp->devfn); | |
2640 | #endif | |
2641 | ||
2642 | if (pci_enable_device(devp)) | |
2643 | return(-EIO); | |
2644 | if ((brdp = stl_allocbrd()) == (stlbrd_t *) NULL) | |
2645 | return(-ENOMEM); | |
2646 | if ((brdp->brdnr = stl_getbrdnr()) < 0) { | |
2647 | printk("STALLION: too many boards found, " | |
2648 | "maximum supported %d\n", STL_MAXBRDS); | |
2649 | return(0); | |
2650 | } | |
2651 | brdp->brdtype = brdtype; | |
2652 | ||
2653 | /* | |
2654 | * Different Stallion boards use the BAR registers in different ways, | |
2655 | * so set up io addresses based on board type. | |
2656 | */ | |
2657 | #ifdef DEBUG | |
2658 | printk("%s(%d): BAR[]=%x,%x,%x,%x IRQ=%x\n", __FILE__, __LINE__, | |
2659 | pci_resource_start(devp, 0), pci_resource_start(devp, 1), | |
2660 | pci_resource_start(devp, 2), pci_resource_start(devp, 3), devp->irq); | |
2661 | #endif | |
2662 | ||
2663 | /* | |
2664 | * We have all resources from the board, so let's setup the actual | |
2665 | * board structure now. | |
2666 | */ | |
2667 | switch (brdtype) { | |
2668 | case BRD_ECHPCI: | |
2669 | brdp->ioaddr2 = pci_resource_start(devp, 0); | |
2670 | brdp->ioaddr1 = pci_resource_start(devp, 1); | |
2671 | break; | |
2672 | case BRD_ECH64PCI: | |
2673 | brdp->ioaddr2 = pci_resource_start(devp, 2); | |
2674 | brdp->ioaddr1 = pci_resource_start(devp, 1); | |
2675 | break; | |
2676 | case BRD_EASYIOPCI: | |
2677 | brdp->ioaddr1 = pci_resource_start(devp, 2); | |
2678 | brdp->ioaddr2 = pci_resource_start(devp, 1); | |
2679 | break; | |
2680 | default: | |
2681 | printk("STALLION: unknown PCI board type=%d\n", brdtype); | |
2682 | break; | |
2683 | } | |
2684 | ||
2685 | brdp->irq = devp->irq; | |
2686 | stl_brdinit(brdp); | |
2687 | ||
2688 | return(0); | |
2689 | } | |
2690 | ||
2691 | /*****************************************************************************/ | |
2692 | ||
2693 | /* | |
2694 | * Find all Stallion PCI boards that might be installed. Initialize each | |
2695 | * one as it is found. | |
2696 | */ | |
2697 | ||
2698 | ||
2699 | static inline int stl_findpcibrds(void) | |
2700 | { | |
2701 | struct pci_dev *dev = NULL; | |
2702 | int i, rc; | |
2703 | ||
2704 | #ifdef DEBUG | |
2705 | printk("stl_findpcibrds()\n"); | |
2706 | #endif | |
2707 | ||
2708 | for (i = 0; (i < stl_nrpcibrds); i++) | |
2709 | while ((dev = pci_find_device(stl_pcibrds[i].vendid, | |
2710 | stl_pcibrds[i].devid, dev))) { | |
2711 | ||
2712 | /* | |
2713 | * Found a device on the PCI bus that has our vendor and | |
2714 | * device ID. Need to check now that it is really us. | |
2715 | */ | |
2716 | if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE) | |
2717 | continue; | |
2718 | ||
2719 | rc = stl_initpcibrd(stl_pcibrds[i].brdtype, dev); | |
2720 | if (rc) | |
2721 | return(rc); | |
2722 | } | |
2723 | ||
2724 | return(0); | |
2725 | } | |
2726 | ||
2727 | #endif | |
2728 | ||
2729 | /*****************************************************************************/ | |
2730 | ||
2731 | /* | |
2732 | * Scan through all the boards in the configuration and see what we | |
2733 | * can find. Handle EIO and the ECH boards a little differently here | |
2734 | * since the initial search and setup is too different. | |
2735 | */ | |
2736 | ||
2737 | static inline int stl_initbrds(void) | |
2738 | { | |
2739 | stlbrd_t *brdp; | |
2740 | stlconf_t *confp; | |
2741 | int i; | |
2742 | ||
2743 | #ifdef DEBUG | |
2744 | printk("stl_initbrds()\n"); | |
2745 | #endif | |
2746 | ||
2747 | if (stl_nrbrds > STL_MAXBRDS) { | |
2748 | printk("STALLION: too many boards in configuration table, " | |
2749 | "truncating to %d\n", STL_MAXBRDS); | |
2750 | stl_nrbrds = STL_MAXBRDS; | |
2751 | } | |
2752 | ||
2753 | /* | |
2754 | * Firstly scan the list of static boards configured. Allocate | |
2755 | * resources and initialize the boards as found. | |
2756 | */ | |
2757 | for (i = 0; (i < stl_nrbrds); i++) { | |
2758 | confp = &stl_brdconf[i]; | |
2759 | stl_parsebrd(confp, stl_brdsp[i]); | |
2760 | if ((brdp = stl_allocbrd()) == (stlbrd_t *) NULL) | |
2761 | return(-ENOMEM); | |
2762 | brdp->brdnr = i; | |
2763 | brdp->brdtype = confp->brdtype; | |
2764 | brdp->ioaddr1 = confp->ioaddr1; | |
2765 | brdp->ioaddr2 = confp->ioaddr2; | |
2766 | brdp->irq = confp->irq; | |
2767 | brdp->irqtype = confp->irqtype; | |
2768 | stl_brdinit(brdp); | |
2769 | } | |
2770 | ||
2771 | /* | |
2772 | * Find any dynamically supported boards. That is via module load | |
2773 | * line options or auto-detected on the PCI bus. | |
2774 | */ | |
2775 | stl_argbrds(); | |
2776 | #ifdef CONFIG_PCI | |
2777 | stl_findpcibrds(); | |
2778 | #endif | |
2779 | ||
2780 | return(0); | |
2781 | } | |
2782 | ||
2783 | /*****************************************************************************/ | |
2784 | ||
2785 | /* | |
2786 | * Return the board stats structure to user app. | |
2787 | */ | |
2788 | ||
2789 | static int stl_getbrdstats(combrd_t __user *bp) | |
2790 | { | |
2791 | stlbrd_t *brdp; | |
2792 | stlpanel_t *panelp; | |
2793 | int i; | |
2794 | ||
2795 | if (copy_from_user(&stl_brdstats, bp, sizeof(combrd_t))) | |
2796 | return -EFAULT; | |
2797 | if (stl_brdstats.brd >= STL_MAXBRDS) | |
2798 | return(-ENODEV); | |
2799 | brdp = stl_brds[stl_brdstats.brd]; | |
2800 | if (brdp == (stlbrd_t *) NULL) | |
2801 | return(-ENODEV); | |
2802 | ||
2803 | memset(&stl_brdstats, 0, sizeof(combrd_t)); | |
2804 | stl_brdstats.brd = brdp->brdnr; | |
2805 | stl_brdstats.type = brdp->brdtype; | |
2806 | stl_brdstats.hwid = brdp->hwid; | |
2807 | stl_brdstats.state = brdp->state; | |
2808 | stl_brdstats.ioaddr = brdp->ioaddr1; | |
2809 | stl_brdstats.ioaddr2 = brdp->ioaddr2; | |
2810 | stl_brdstats.irq = brdp->irq; | |
2811 | stl_brdstats.nrpanels = brdp->nrpanels; | |
2812 | stl_brdstats.nrports = brdp->nrports; | |
2813 | for (i = 0; (i < brdp->nrpanels); i++) { | |
2814 | panelp = brdp->panels[i]; | |
2815 | stl_brdstats.panels[i].panel = i; | |
2816 | stl_brdstats.panels[i].hwid = panelp->hwid; | |
2817 | stl_brdstats.panels[i].nrports = panelp->nrports; | |
2818 | } | |
2819 | ||
2820 | return copy_to_user(bp, &stl_brdstats, sizeof(combrd_t)) ? -EFAULT : 0; | |
2821 | } | |
2822 | ||
2823 | /*****************************************************************************/ | |
2824 | ||
2825 | /* | |
2826 | * Resolve the referenced port number into a port struct pointer. | |
2827 | */ | |
2828 | ||
2829 | static stlport_t *stl_getport(int brdnr, int panelnr, int portnr) | |
2830 | { | |
2831 | stlbrd_t *brdp; | |
2832 | stlpanel_t *panelp; | |
2833 | ||
2834 | if ((brdnr < 0) || (brdnr >= STL_MAXBRDS)) | |
2835 | return((stlport_t *) NULL); | |
2836 | brdp = stl_brds[brdnr]; | |
2837 | if (brdp == (stlbrd_t *) NULL) | |
2838 | return((stlport_t *) NULL); | |
2839 | if ((panelnr < 0) || (panelnr >= brdp->nrpanels)) | |
2840 | return((stlport_t *) NULL); | |
2841 | panelp = brdp->panels[panelnr]; | |
2842 | if (panelp == (stlpanel_t *) NULL) | |
2843 | return((stlport_t *) NULL); | |
2844 | if ((portnr < 0) || (portnr >= panelp->nrports)) | |
2845 | return((stlport_t *) NULL); | |
2846 | return(panelp->ports[portnr]); | |
2847 | } | |
2848 | ||
2849 | /*****************************************************************************/ | |
2850 | ||
2851 | /* | |
2852 | * Return the port stats structure to user app. A NULL port struct | |
2853 | * pointer passed in means that we need to find out from the app | |
2854 | * what port to get stats for (used through board control device). | |
2855 | */ | |
2856 | ||
2857 | static int stl_getportstats(stlport_t *portp, comstats_t __user *cp) | |
2858 | { | |
2859 | unsigned char *head, *tail; | |
2860 | unsigned long flags; | |
2861 | ||
2862 | if (!portp) { | |
2863 | if (copy_from_user(&stl_comstats, cp, sizeof(comstats_t))) | |
2864 | return -EFAULT; | |
2865 | portp = stl_getport(stl_comstats.brd, stl_comstats.panel, | |
2866 | stl_comstats.port); | |
2867 | if (portp == (stlport_t *) NULL) | |
2868 | return(-ENODEV); | |
2869 | } | |
2870 | ||
2871 | portp->stats.state = portp->istate; | |
2872 | portp->stats.flags = portp->flags; | |
2873 | portp->stats.hwid = portp->hwid; | |
2874 | ||
2875 | portp->stats.ttystate = 0; | |
2876 | portp->stats.cflags = 0; | |
2877 | portp->stats.iflags = 0; | |
2878 | portp->stats.oflags = 0; | |
2879 | portp->stats.lflags = 0; | |
2880 | portp->stats.rxbuffered = 0; | |
2881 | ||
2882 | save_flags(flags); | |
2883 | cli(); | |
2884 | if (portp->tty != (struct tty_struct *) NULL) { | |
2885 | if (portp->tty->driver_data == portp) { | |
2886 | portp->stats.ttystate = portp->tty->flags; | |
33f0f88f AC |
2887 | /* No longer available as a statistic */ |
2888 | portp->stats.rxbuffered = 1; /*portp->tty->flip.count; */ | |
1da177e4 LT |
2889 | if (portp->tty->termios != (struct termios *) NULL) { |
2890 | portp->stats.cflags = portp->tty->termios->c_cflag; | |
2891 | portp->stats.iflags = portp->tty->termios->c_iflag; | |
2892 | portp->stats.oflags = portp->tty->termios->c_oflag; | |
2893 | portp->stats.lflags = portp->tty->termios->c_lflag; | |
2894 | } | |
2895 | } | |
2896 | } | |
2897 | restore_flags(flags); | |
2898 | ||
2899 | head = portp->tx.head; | |
2900 | tail = portp->tx.tail; | |
2901 | portp->stats.txbuffered = ((head >= tail) ? (head - tail) : | |
2902 | (STL_TXBUFSIZE - (tail - head))); | |
2903 | ||
2904 | portp->stats.signals = (unsigned long) stl_getsignals(portp); | |
2905 | ||
2906 | return copy_to_user(cp, &portp->stats, | |
2907 | sizeof(comstats_t)) ? -EFAULT : 0; | |
2908 | } | |
2909 | ||
2910 | /*****************************************************************************/ | |
2911 | ||
2912 | /* | |
2913 | * Clear the port stats structure. We also return it zeroed out... | |
2914 | */ | |
2915 | ||
2916 | static int stl_clrportstats(stlport_t *portp, comstats_t __user *cp) | |
2917 | { | |
2918 | if (!portp) { | |
2919 | if (copy_from_user(&stl_comstats, cp, sizeof(comstats_t))) | |
2920 | return -EFAULT; | |
2921 | portp = stl_getport(stl_comstats.brd, stl_comstats.panel, | |
2922 | stl_comstats.port); | |
2923 | if (portp == (stlport_t *) NULL) | |
2924 | return(-ENODEV); | |
2925 | } | |
2926 | ||
2927 | memset(&portp->stats, 0, sizeof(comstats_t)); | |
2928 | portp->stats.brd = portp->brdnr; | |
2929 | portp->stats.panel = portp->panelnr; | |
2930 | portp->stats.port = portp->portnr; | |
2931 | return copy_to_user(cp, &portp->stats, | |
2932 | sizeof(comstats_t)) ? -EFAULT : 0; | |
2933 | } | |
2934 | ||
2935 | /*****************************************************************************/ | |
2936 | ||
2937 | /* | |
2938 | * Return the entire driver ports structure to a user app. | |
2939 | */ | |
2940 | ||
2941 | static int stl_getportstruct(stlport_t __user *arg) | |
2942 | { | |
2943 | stlport_t *portp; | |
2944 | ||
2945 | if (copy_from_user(&stl_dummyport, arg, sizeof(stlport_t))) | |
2946 | return -EFAULT; | |
2947 | portp = stl_getport(stl_dummyport.brdnr, stl_dummyport.panelnr, | |
2948 | stl_dummyport.portnr); | |
2949 | if (!portp) | |
2950 | return -ENODEV; | |
2951 | return copy_to_user(arg, portp, sizeof(stlport_t)) ? -EFAULT : 0; | |
2952 | } | |
2953 | ||
2954 | /*****************************************************************************/ | |
2955 | ||
2956 | /* | |
2957 | * Return the entire driver board structure to a user app. | |
2958 | */ | |
2959 | ||
2960 | static int stl_getbrdstruct(stlbrd_t __user *arg) | |
2961 | { | |
2962 | stlbrd_t *brdp; | |
2963 | ||
2964 | if (copy_from_user(&stl_dummybrd, arg, sizeof(stlbrd_t))) | |
2965 | return -EFAULT; | |
2966 | if ((stl_dummybrd.brdnr < 0) || (stl_dummybrd.brdnr >= STL_MAXBRDS)) | |
2967 | return -ENODEV; | |
2968 | brdp = stl_brds[stl_dummybrd.brdnr]; | |
2969 | if (!brdp) | |
2970 | return(-ENODEV); | |
2971 | return copy_to_user(arg, brdp, sizeof(stlbrd_t)) ? -EFAULT : 0; | |
2972 | } | |
2973 | ||
2974 | /*****************************************************************************/ | |
2975 | ||
2976 | /* | |
2977 | * The "staliomem" device is also required to do some special operations | |
2978 | * on the board and/or ports. In this driver it is mostly used for stats | |
2979 | * collection. | |
2980 | */ | |
2981 | ||
2982 | static int stl_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg) | |
2983 | { | |
2984 | int brdnr, rc; | |
2985 | void __user *argp = (void __user *)arg; | |
2986 | ||
2987 | #ifdef DEBUG | |
2988 | printk("stl_memioctl(ip=%x,fp=%x,cmd=%x,arg=%x)\n", (int) ip, | |
2989 | (int) fp, cmd, (int) arg); | |
2990 | #endif | |
2991 | ||
2992 | brdnr = iminor(ip); | |
2993 | if (brdnr >= STL_MAXBRDS) | |
2994 | return(-ENODEV); | |
2995 | rc = 0; | |
2996 | ||
2997 | switch (cmd) { | |
2998 | case COM_GETPORTSTATS: | |
2999 | rc = stl_getportstats(NULL, argp); | |
3000 | break; | |
3001 | case COM_CLRPORTSTATS: | |
3002 | rc = stl_clrportstats(NULL, argp); | |
3003 | break; | |
3004 | case COM_GETBRDSTATS: | |
3005 | rc = stl_getbrdstats(argp); | |
3006 | break; | |
3007 | case COM_READPORT: | |
3008 | rc = stl_getportstruct(argp); | |
3009 | break; | |
3010 | case COM_READBOARD: | |
3011 | rc = stl_getbrdstruct(argp); | |
3012 | break; | |
3013 | default: | |
3014 | rc = -ENOIOCTLCMD; | |
3015 | break; | |
3016 | } | |
3017 | ||
3018 | return(rc); | |
3019 | } | |
3020 | ||
3021 | static struct tty_operations stl_ops = { | |
3022 | .open = stl_open, | |
3023 | .close = stl_close, | |
3024 | .write = stl_write, | |
3025 | .put_char = stl_putchar, | |
3026 | .flush_chars = stl_flushchars, | |
3027 | .write_room = stl_writeroom, | |
3028 | .chars_in_buffer = stl_charsinbuffer, | |
3029 | .ioctl = stl_ioctl, | |
3030 | .set_termios = stl_settermios, | |
3031 | .throttle = stl_throttle, | |
3032 | .unthrottle = stl_unthrottle, | |
3033 | .stop = stl_stop, | |
3034 | .start = stl_start, | |
3035 | .hangup = stl_hangup, | |
3036 | .flush_buffer = stl_flushbuffer, | |
3037 | .break_ctl = stl_breakctl, | |
3038 | .wait_until_sent = stl_waituntilsent, | |
3039 | .send_xchar = stl_sendxchar, | |
3040 | .read_proc = stl_readproc, | |
3041 | .tiocmget = stl_tiocmget, | |
3042 | .tiocmset = stl_tiocmset, | |
3043 | }; | |
3044 | ||
3045 | /*****************************************************************************/ | |
3046 | ||
408b664a | 3047 | static int __init stl_init(void) |
1da177e4 LT |
3048 | { |
3049 | int i; | |
3050 | printk(KERN_INFO "%s: version %s\n", stl_drvtitle, stl_drvversion); | |
3051 | ||
3052 | stl_initbrds(); | |
3053 | ||
3054 | stl_serial = alloc_tty_driver(STL_MAXBRDS * STL_MAXPORTS); | |
3055 | if (!stl_serial) | |
3056 | return -1; | |
3057 | ||
3058 | /* | |
3059 | * Allocate a temporary write buffer. | |
3060 | */ | |
b0b4ed72 TK |
3061 | stl_tmpwritebuf = kmalloc(STL_TXBUFSIZE, GFP_KERNEL); |
3062 | if (!stl_tmpwritebuf) | |
1da177e4 LT |
3063 | printk("STALLION: failed to allocate memory (size=%d)\n", |
3064 | STL_TXBUFSIZE); | |
3065 | ||
3066 | /* | |
3067 | * Set up a character driver for per board stuff. This is mainly used | |
3068 | * to do stats ioctls on the ports. | |
3069 | */ | |
3070 | if (register_chrdev(STL_SIOMEMMAJOR, "staliomem", &stl_fsiomem)) | |
3071 | printk("STALLION: failed to register serial board device\n"); | |
1da177e4 | 3072 | |
ca8eca68 | 3073 | stallion_class = class_create(THIS_MODULE, "staliomem"); |
1da177e4 LT |
3074 | for (i = 0; i < 4; i++) { |
3075 | devfs_mk_cdev(MKDEV(STL_SIOMEMMAJOR, i), | |
3076 | S_IFCHR|S_IRUSR|S_IWUSR, | |
3077 | "staliomem/%d", i); | |
53f46542 GKH |
3078 | class_device_create(stallion_class, NULL, |
3079 | MKDEV(STL_SIOMEMMAJOR, i), NULL, | |
3080 | "staliomem%d", i); | |
1da177e4 LT |
3081 | } |
3082 | ||
3083 | stl_serial->owner = THIS_MODULE; | |
3084 | stl_serial->driver_name = stl_drvname; | |
3085 | stl_serial->name = "ttyE"; | |
3086 | stl_serial->devfs_name = "tts/E"; | |
3087 | stl_serial->major = STL_SERIALMAJOR; | |
3088 | stl_serial->minor_start = 0; | |
3089 | stl_serial->type = TTY_DRIVER_TYPE_SERIAL; | |
3090 | stl_serial->subtype = SERIAL_TYPE_NORMAL; | |
3091 | stl_serial->init_termios = stl_deftermios; | |
3092 | stl_serial->flags = TTY_DRIVER_REAL_RAW; | |
3093 | tty_set_operations(stl_serial, &stl_ops); | |
3094 | ||
3095 | if (tty_register_driver(stl_serial)) { | |
3096 | put_tty_driver(stl_serial); | |
3097 | printk("STALLION: failed to register serial driver\n"); | |
3098 | return -1; | |
3099 | } | |
3100 | ||
014c2544 | 3101 | return 0; |
1da177e4 LT |
3102 | } |
3103 | ||
3104 | /*****************************************************************************/ | |
3105 | /* CD1400 HARDWARE FUNCTIONS */ | |
3106 | /*****************************************************************************/ | |
3107 | ||
3108 | /* | |
3109 | * These functions get/set/update the registers of the cd1400 UARTs. | |
3110 | * Access to the cd1400 registers is via an address/data io port pair. | |
3111 | * (Maybe should make this inline...) | |
3112 | */ | |
3113 | ||
3114 | static int stl_cd1400getreg(stlport_t *portp, int regnr) | |
3115 | { | |
3116 | outb((regnr + portp->uartaddr), portp->ioaddr); | |
014c2544 | 3117 | return inb(portp->ioaddr + EREG_DATA); |
1da177e4 LT |
3118 | } |
3119 | ||
3120 | static void stl_cd1400setreg(stlport_t *portp, int regnr, int value) | |
3121 | { | |
3122 | outb((regnr + portp->uartaddr), portp->ioaddr); | |
3123 | outb(value, portp->ioaddr + EREG_DATA); | |
3124 | } | |
3125 | ||
3126 | static int stl_cd1400updatereg(stlport_t *portp, int regnr, int value) | |
3127 | { | |
3128 | outb((regnr + portp->uartaddr), portp->ioaddr); | |
3129 | if (inb(portp->ioaddr + EREG_DATA) != value) { | |
3130 | outb(value, portp->ioaddr + EREG_DATA); | |
014c2544 | 3131 | return 1; |
1da177e4 | 3132 | } |
014c2544 | 3133 | return 0; |
1da177e4 LT |
3134 | } |
3135 | ||
3136 | /*****************************************************************************/ | |
3137 | ||
3138 | /* | |
3139 | * Inbitialize the UARTs in a panel. We don't care what sort of board | |
3140 | * these ports are on - since the port io registers are almost | |
3141 | * identical when dealing with ports. | |
3142 | */ | |
3143 | ||
3144 | static int stl_cd1400panelinit(stlbrd_t *brdp, stlpanel_t *panelp) | |
3145 | { | |
3146 | unsigned int gfrcr; | |
3147 | int chipmask, i, j; | |
3148 | int nrchips, uartaddr, ioaddr; | |
3149 | ||
3150 | #ifdef DEBUG | |
3151 | printk("stl_panelinit(brdp=%x,panelp=%x)\n", (int) brdp, (int) panelp); | |
3152 | #endif | |
3153 | ||
3154 | BRDENABLE(panelp->brdnr, panelp->pagenr); | |
3155 | ||
3156 | /* | |
3157 | * Check that each chip is present and started up OK. | |
3158 | */ | |
3159 | chipmask = 0; | |
3160 | nrchips = panelp->nrports / CD1400_PORTS; | |
3161 | for (i = 0; (i < nrchips); i++) { | |
3162 | if (brdp->brdtype == BRD_ECHPCI) { | |
3163 | outb((panelp->pagenr + (i >> 1)), brdp->ioctrl); | |
3164 | ioaddr = panelp->iobase; | |
3165 | } else { | |
3166 | ioaddr = panelp->iobase + (EREG_BANKSIZE * (i >> 1)); | |
3167 | } | |
3168 | uartaddr = (i & 0x01) ? 0x080 : 0; | |
3169 | outb((GFRCR + uartaddr), ioaddr); | |
3170 | outb(0, (ioaddr + EREG_DATA)); | |
3171 | outb((CCR + uartaddr), ioaddr); | |
3172 | outb(CCR_RESETFULL, (ioaddr + EREG_DATA)); | |
3173 | outb(CCR_RESETFULL, (ioaddr + EREG_DATA)); | |
3174 | outb((GFRCR + uartaddr), ioaddr); | |
3175 | for (j = 0; (j < CCR_MAXWAIT); j++) { | |
3176 | if ((gfrcr = inb(ioaddr + EREG_DATA)) != 0) | |
3177 | break; | |
3178 | } | |
3179 | if ((j >= CCR_MAXWAIT) || (gfrcr < 0x40) || (gfrcr > 0x60)) { | |
3180 | printk("STALLION: cd1400 not responding, " | |
3181 | "brd=%d panel=%d chip=%d\n", | |
3182 | panelp->brdnr, panelp->panelnr, i); | |
3183 | continue; | |
3184 | } | |
3185 | chipmask |= (0x1 << i); | |
3186 | outb((PPR + uartaddr), ioaddr); | |
3187 | outb(PPR_SCALAR, (ioaddr + EREG_DATA)); | |
3188 | } | |
3189 | ||
3190 | BRDDISABLE(panelp->brdnr); | |
014c2544 | 3191 | return chipmask; |
1da177e4 LT |
3192 | } |
3193 | ||
3194 | /*****************************************************************************/ | |
3195 | ||
3196 | /* | |
3197 | * Initialize hardware specific port registers. | |
3198 | */ | |
3199 | ||
3200 | static void stl_cd1400portinit(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *portp) | |
3201 | { | |
3202 | #ifdef DEBUG | |
3203 | printk("stl_cd1400portinit(brdp=%x,panelp=%x,portp=%x)\n", | |
3204 | (int) brdp, (int) panelp, (int) portp); | |
3205 | #endif | |
3206 | ||
3207 | if ((brdp == (stlbrd_t *) NULL) || (panelp == (stlpanel_t *) NULL) || | |
3208 | (portp == (stlport_t *) NULL)) | |
3209 | return; | |
3210 | ||
3211 | portp->ioaddr = panelp->iobase + (((brdp->brdtype == BRD_ECHPCI) || | |
3212 | (portp->portnr < 8)) ? 0 : EREG_BANKSIZE); | |
3213 | portp->uartaddr = (portp->portnr & 0x04) << 5; | |
3214 | portp->pagenr = panelp->pagenr + (portp->portnr >> 3); | |
3215 | ||
3216 | BRDENABLE(portp->brdnr, portp->pagenr); | |
3217 | stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); | |
3218 | stl_cd1400setreg(portp, LIVR, (portp->portnr << 3)); | |
3219 | portp->hwid = stl_cd1400getreg(portp, GFRCR); | |
3220 | BRDDISABLE(portp->brdnr); | |
3221 | } | |
3222 | ||
3223 | /*****************************************************************************/ | |
3224 | ||
3225 | /* | |
3226 | * Wait for the command register to be ready. We will poll this, | |
3227 | * since it won't usually take too long to be ready. | |
3228 | */ | |
3229 | ||
3230 | static void stl_cd1400ccrwait(stlport_t *portp) | |
3231 | { | |
3232 | int i; | |
3233 | ||
3234 | for (i = 0; (i < CCR_MAXWAIT); i++) { | |
3235 | if (stl_cd1400getreg(portp, CCR) == 0) { | |
3236 | return; | |
3237 | } | |
3238 | } | |
3239 | ||
3240 | printk("STALLION: cd1400 not responding, port=%d panel=%d brd=%d\n", | |
3241 | portp->portnr, portp->panelnr, portp->brdnr); | |
3242 | } | |
3243 | ||
3244 | /*****************************************************************************/ | |
3245 | ||
3246 | /* | |
3247 | * Set up the cd1400 registers for a port based on the termios port | |
3248 | * settings. | |
3249 | */ | |
3250 | ||
3251 | static void stl_cd1400setport(stlport_t *portp, struct termios *tiosp) | |
3252 | { | |
3253 | stlbrd_t *brdp; | |
3254 | unsigned long flags; | |
3255 | unsigned int clkdiv, baudrate; | |
3256 | unsigned char cor1, cor2, cor3; | |
3257 | unsigned char cor4, cor5, ccr; | |
3258 | unsigned char srer, sreron, sreroff; | |
3259 | unsigned char mcor1, mcor2, rtpr; | |
3260 | unsigned char clk, div; | |
3261 | ||
3262 | cor1 = 0; | |
3263 | cor2 = 0; | |
3264 | cor3 = 0; | |
3265 | cor4 = 0; | |
3266 | cor5 = 0; | |
3267 | ccr = 0; | |
3268 | rtpr = 0; | |
3269 | clk = 0; | |
3270 | div = 0; | |
3271 | mcor1 = 0; | |
3272 | mcor2 = 0; | |
3273 | sreron = 0; | |
3274 | sreroff = 0; | |
3275 | ||
3276 | brdp = stl_brds[portp->brdnr]; | |
3277 | if (brdp == (stlbrd_t *) NULL) | |
3278 | return; | |
3279 | ||
3280 | /* | |
3281 | * Set up the RX char ignore mask with those RX error types we | |
3282 | * can ignore. We can get the cd1400 to help us out a little here, | |
3283 | * it will ignore parity errors and breaks for us. | |
3284 | */ | |
3285 | portp->rxignoremsk = 0; | |
3286 | if (tiosp->c_iflag & IGNPAR) { | |
3287 | portp->rxignoremsk |= (ST_PARITY | ST_FRAMING | ST_OVERRUN); | |
3288 | cor1 |= COR1_PARIGNORE; | |
3289 | } | |
3290 | if (tiosp->c_iflag & IGNBRK) { | |
3291 | portp->rxignoremsk |= ST_BREAK; | |
3292 | cor4 |= COR4_IGNBRK; | |
3293 | } | |
3294 | ||
3295 | portp->rxmarkmsk = ST_OVERRUN; | |
3296 | if (tiosp->c_iflag & (INPCK | PARMRK)) | |
3297 | portp->rxmarkmsk |= (ST_PARITY | ST_FRAMING); | |
3298 | if (tiosp->c_iflag & BRKINT) | |
3299 | portp->rxmarkmsk |= ST_BREAK; | |
3300 | ||
3301 | /* | |
3302 | * Go through the char size, parity and stop bits and set all the | |
3303 | * option register appropriately. | |
3304 | */ | |
3305 | switch (tiosp->c_cflag & CSIZE) { | |
3306 | case CS5: | |
3307 | cor1 |= COR1_CHL5; | |
3308 | break; | |
3309 | case CS6: | |
3310 | cor1 |= COR1_CHL6; | |
3311 | break; | |
3312 | case CS7: | |
3313 | cor1 |= COR1_CHL7; | |
3314 | break; | |
3315 | default: | |
3316 | cor1 |= COR1_CHL8; | |
3317 | break; | |
3318 | } | |
3319 | ||
3320 | if (tiosp->c_cflag & CSTOPB) | |
3321 | cor1 |= COR1_STOP2; | |
3322 | else | |
3323 | cor1 |= COR1_STOP1; | |
3324 | ||
3325 | if (tiosp->c_cflag & PARENB) { | |
3326 | if (tiosp->c_cflag & PARODD) | |
3327 | cor1 |= (COR1_PARENB | COR1_PARODD); | |
3328 | else | |
3329 | cor1 |= (COR1_PARENB | COR1_PAREVEN); | |
3330 | } else { | |
3331 | cor1 |= COR1_PARNONE; | |
3332 | } | |
3333 | ||
3334 | /* | |
3335 | * Set the RX FIFO threshold at 6 chars. This gives a bit of breathing | |
3336 | * space for hardware flow control and the like. This should be set to | |
3337 | * VMIN. Also here we will set the RX data timeout to 10ms - this should | |
3338 | * really be based on VTIME. | |
3339 | */ | |
3340 | cor3 |= FIFO_RXTHRESHOLD; | |
3341 | rtpr = 2; | |
3342 | ||
3343 | /* | |
3344 | * Calculate the baud rate timers. For now we will just assume that | |
3345 | * the input and output baud are the same. Could have used a baud | |
3346 | * table here, but this way we can generate virtually any baud rate | |
3347 | * we like! | |
3348 | */ | |
3349 | baudrate = tiosp->c_cflag & CBAUD; | |
3350 | if (baudrate & CBAUDEX) { | |
3351 | baudrate &= ~CBAUDEX; | |
3352 | if ((baudrate < 1) || (baudrate > 4)) | |
3353 | tiosp->c_cflag &= ~CBAUDEX; | |
3354 | else | |
3355 | baudrate += 15; | |
3356 | } | |
3357 | baudrate = stl_baudrates[baudrate]; | |
3358 | if ((tiosp->c_cflag & CBAUD) == B38400) { | |
3359 | if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) | |
3360 | baudrate = 57600; | |
3361 | else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) | |
3362 | baudrate = 115200; | |
3363 | else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) | |
3364 | baudrate = 230400; | |
3365 | else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) | |
3366 | baudrate = 460800; | |
3367 | else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) | |
3368 | baudrate = (portp->baud_base / portp->custom_divisor); | |
3369 | } | |
3370 | if (baudrate > STL_CD1400MAXBAUD) | |
3371 | baudrate = STL_CD1400MAXBAUD; | |
3372 | ||
3373 | if (baudrate > 0) { | |
3374 | for (clk = 0; (clk < CD1400_NUMCLKS); clk++) { | |
3375 | clkdiv = ((portp->clk / stl_cd1400clkdivs[clk]) / baudrate); | |
3376 | if (clkdiv < 0x100) | |
3377 | break; | |
3378 | } | |
3379 | div = (unsigned char) clkdiv; | |
3380 | } | |
3381 | ||
3382 | /* | |
3383 | * Check what form of modem signaling is required and set it up. | |
3384 | */ | |
3385 | if ((tiosp->c_cflag & CLOCAL) == 0) { | |
3386 | mcor1 |= MCOR1_DCD; | |
3387 | mcor2 |= MCOR2_DCD; | |
3388 | sreron |= SRER_MODEM; | |
3389 | portp->flags |= ASYNC_CHECK_CD; | |
3390 | } else { | |
3391 | portp->flags &= ~ASYNC_CHECK_CD; | |
3392 | } | |
3393 | ||
3394 | /* | |
3395 | * Setup cd1400 enhanced modes if we can. In particular we want to | |
3396 | * handle as much of the flow control as possible automatically. As | |
3397 | * well as saving a few CPU cycles it will also greatly improve flow | |
3398 | * control reliability. | |
3399 | */ | |
3400 | if (tiosp->c_iflag & IXON) { | |
3401 | cor2 |= COR2_TXIBE; | |
3402 | cor3 |= COR3_SCD12; | |
3403 | if (tiosp->c_iflag & IXANY) | |
3404 | cor2 |= COR2_IXM; | |
3405 | } | |
3406 | ||
3407 | if (tiosp->c_cflag & CRTSCTS) { | |
3408 | cor2 |= COR2_CTSAE; | |
3409 | mcor1 |= FIFO_RTSTHRESHOLD; | |
3410 | } | |
3411 | ||
3412 | /* | |
3413 | * All cd1400 register values calculated so go through and set | |
3414 | * them all up. | |
3415 | */ | |
3416 | ||
3417 | #ifdef DEBUG | |
3418 | printk("SETPORT: portnr=%d panelnr=%d brdnr=%d\n", | |
3419 | portp->portnr, portp->panelnr, portp->brdnr); | |
3420 | printk(" cor1=%x cor2=%x cor3=%x cor4=%x cor5=%x\n", | |
3421 | cor1, cor2, cor3, cor4, cor5); | |
3422 | printk(" mcor1=%x mcor2=%x rtpr=%x sreron=%x sreroff=%x\n", | |
3423 | mcor1, mcor2, rtpr, sreron, sreroff); | |
3424 | printk(" tcor=%x tbpr=%x rcor=%x rbpr=%x\n", clk, div, clk, div); | |
3425 | printk(" schr1=%x schr2=%x schr3=%x schr4=%x\n", | |
3426 | tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP], | |
3427 | tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP]); | |
3428 | #endif | |
3429 | ||
3430 | save_flags(flags); | |
3431 | cli(); | |
3432 | BRDENABLE(portp->brdnr, portp->pagenr); | |
3433 | stl_cd1400setreg(portp, CAR, (portp->portnr & 0x3)); | |
3434 | srer = stl_cd1400getreg(portp, SRER); | |
3435 | stl_cd1400setreg(portp, SRER, 0); | |
3436 | if (stl_cd1400updatereg(portp, COR1, cor1)) | |
3437 | ccr = 1; | |
3438 | if (stl_cd1400updatereg(portp, COR2, cor2)) | |
3439 | ccr = 1; | |
3440 | if (stl_cd1400updatereg(portp, COR3, cor3)) | |
3441 | ccr = 1; | |
3442 | if (ccr) { | |
3443 | stl_cd1400ccrwait(portp); | |
3444 | stl_cd1400setreg(portp, CCR, CCR_CORCHANGE); | |
3445 | } | |
3446 | stl_cd1400setreg(portp, COR4, cor4); | |
3447 | stl_cd1400setreg(portp, COR5, cor5); | |
3448 | stl_cd1400setreg(portp, MCOR1, mcor1); | |
3449 | stl_cd1400setreg(portp, MCOR2, mcor2); | |
3450 | if (baudrate > 0) { | |
3451 | stl_cd1400setreg(portp, TCOR, clk); | |
3452 | stl_cd1400setreg(portp, TBPR, div); | |
3453 | stl_cd1400setreg(portp, RCOR, clk); | |
3454 | stl_cd1400setreg(portp, RBPR, div); | |
3455 | } | |
3456 | stl_cd1400setreg(portp, SCHR1, tiosp->c_cc[VSTART]); | |
3457 | stl_cd1400setreg(portp, SCHR2, tiosp->c_cc[VSTOP]); | |
3458 | stl_cd1400setreg(portp, SCHR3, tiosp->c_cc[VSTART]); | |
3459 | stl_cd1400setreg(portp, SCHR4, tiosp->c_cc[VSTOP]); | |
3460 | stl_cd1400setreg(portp, RTPR, rtpr); | |
3461 | mcor1 = stl_cd1400getreg(portp, MSVR1); | |
3462 | if (mcor1 & MSVR1_DCD) | |
3463 | portp->sigs |= TIOCM_CD; | |
3464 | else | |
3465 | portp->sigs &= ~TIOCM_CD; | |
3466 | stl_cd1400setreg(portp, SRER, ((srer & ~sreroff) | sreron)); | |
3467 | BRDDISABLE(portp->brdnr); | |
3468 | restore_flags(flags); | |
3469 | } | |
3470 | ||
3471 | /*****************************************************************************/ | |
3472 | ||
3473 | /* | |
3474 | * Set the state of the DTR and RTS signals. | |
3475 | */ | |
3476 | ||
3477 | static void stl_cd1400setsignals(stlport_t *portp, int dtr, int rts) | |
3478 | { | |
3479 | unsigned char msvr1, msvr2; | |
3480 | unsigned long flags; | |
3481 | ||
3482 | #ifdef DEBUG | |
3483 | printk("stl_cd1400setsignals(portp=%x,dtr=%d,rts=%d)\n", | |
3484 | (int) portp, dtr, rts); | |
3485 | #endif | |
3486 | ||
3487 | msvr1 = 0; | |
3488 | msvr2 = 0; | |
3489 | if (dtr > 0) | |
3490 | msvr1 = MSVR1_DTR; | |
3491 | if (rts > 0) | |
3492 | msvr2 = MSVR2_RTS; | |
3493 | ||
3494 | save_flags(flags); | |
3495 | cli(); | |
3496 | BRDENABLE(portp->brdnr, portp->pagenr); | |
3497 | stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); | |
3498 | if (rts >= 0) | |
3499 | stl_cd1400setreg(portp, MSVR2, msvr2); | |
3500 | if (dtr >= 0) | |
3501 | stl_cd1400setreg(portp, MSVR1, msvr1); | |
3502 | BRDDISABLE(portp->brdnr); | |
3503 | restore_flags(flags); | |
3504 | } | |
3505 | ||
3506 | /*****************************************************************************/ | |
3507 | ||
3508 | /* | |
3509 | * Return the state of the signals. | |
3510 | */ | |
3511 | ||
3512 | static int stl_cd1400getsignals(stlport_t *portp) | |
3513 | { | |
3514 | unsigned char msvr1, msvr2; | |
3515 | unsigned long flags; | |
3516 | int sigs; | |
3517 | ||
3518 | #ifdef DEBUG | |
3519 | printk("stl_cd1400getsignals(portp=%x)\n", (int) portp); | |
3520 | #endif | |
3521 | ||
3522 | save_flags(flags); | |
3523 | cli(); | |
3524 | BRDENABLE(portp->brdnr, portp->pagenr); | |
3525 | stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); | |
3526 | msvr1 = stl_cd1400getreg(portp, MSVR1); | |
3527 | msvr2 = stl_cd1400getreg(portp, MSVR2); | |
3528 | BRDDISABLE(portp->brdnr); | |
3529 | restore_flags(flags); | |
3530 | ||
3531 | sigs = 0; | |
3532 | sigs |= (msvr1 & MSVR1_DCD) ? TIOCM_CD : 0; | |
3533 | sigs |= (msvr1 & MSVR1_CTS) ? TIOCM_CTS : 0; | |
3534 | sigs |= (msvr1 & MSVR1_DTR) ? TIOCM_DTR : 0; | |
3535 | sigs |= (msvr2 & MSVR2_RTS) ? TIOCM_RTS : 0; | |
3536 | #if 0 | |
3537 | sigs |= (msvr1 & MSVR1_RI) ? TIOCM_RI : 0; | |
3538 | sigs |= (msvr1 & MSVR1_DSR) ? TIOCM_DSR : 0; | |
3539 | #else | |
3540 | sigs |= TIOCM_DSR; | |
3541 | #endif | |
014c2544 | 3542 | return sigs; |
1da177e4 LT |
3543 | } |
3544 | ||
3545 | /*****************************************************************************/ | |
3546 | ||
3547 | /* | |
3548 | * Enable/Disable the Transmitter and/or Receiver. | |
3549 | */ | |
3550 | ||
3551 | static void stl_cd1400enablerxtx(stlport_t *portp, int rx, int tx) | |
3552 | { | |
3553 | unsigned char ccr; | |
3554 | unsigned long flags; | |
3555 | ||
3556 | #ifdef DEBUG | |
3557 | printk("stl_cd1400enablerxtx(portp=%x,rx=%d,tx=%d)\n", | |
3558 | (int) portp, rx, tx); | |
3559 | #endif | |
3560 | ccr = 0; | |
3561 | ||
3562 | if (tx == 0) | |
3563 | ccr |= CCR_TXDISABLE; | |
3564 | else if (tx > 0) | |
3565 | ccr |= CCR_TXENABLE; | |
3566 | if (rx == 0) | |
3567 | ccr |= CCR_RXDISABLE; | |
3568 | else if (rx > 0) | |
3569 | ccr |= CCR_RXENABLE; | |
3570 | ||
3571 | save_flags(flags); | |
3572 | cli(); | |
3573 | BRDENABLE(portp->brdnr, portp->pagenr); | |
3574 | stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); | |
3575 | stl_cd1400ccrwait(portp); | |
3576 | stl_cd1400setreg(portp, CCR, ccr); | |
3577 | stl_cd1400ccrwait(portp); | |
3578 | BRDDISABLE(portp->brdnr); | |
3579 | restore_flags(flags); | |
3580 | } | |
3581 | ||
3582 | /*****************************************************************************/ | |
3583 | ||
3584 | /* | |
3585 | * Start/stop the Transmitter and/or Receiver. | |
3586 | */ | |
3587 | ||
3588 | static void stl_cd1400startrxtx(stlport_t *portp, int rx, int tx) | |
3589 | { | |
3590 | unsigned char sreron, sreroff; | |
3591 | unsigned long flags; | |
3592 | ||
3593 | #ifdef DEBUG | |
3594 | printk("stl_cd1400startrxtx(portp=%x,rx=%d,tx=%d)\n", | |
3595 | (int) portp, rx, tx); | |
3596 | #endif | |
3597 | ||
3598 | sreron = 0; | |
3599 | sreroff = 0; | |
3600 | if (tx == 0) | |
3601 | sreroff |= (SRER_TXDATA | SRER_TXEMPTY); | |
3602 | else if (tx == 1) | |
3603 | sreron |= SRER_TXDATA; | |
3604 | else if (tx >= 2) | |
3605 | sreron |= SRER_TXEMPTY; | |
3606 | if (rx == 0) | |
3607 | sreroff |= SRER_RXDATA; | |
3608 | else if (rx > 0) | |
3609 | sreron |= SRER_RXDATA; | |
3610 | ||
3611 | save_flags(flags); | |
3612 | cli(); | |
3613 | BRDENABLE(portp->brdnr, portp->pagenr); | |
3614 | stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); | |
3615 | stl_cd1400setreg(portp, SRER, | |
3616 | ((stl_cd1400getreg(portp, SRER) & ~sreroff) | sreron)); | |
3617 | BRDDISABLE(portp->brdnr); | |
3618 | if (tx > 0) | |
3619 | set_bit(ASYI_TXBUSY, &portp->istate); | |
3620 | restore_flags(flags); | |
3621 | } | |
3622 | ||
3623 | /*****************************************************************************/ | |
3624 | ||
3625 | /* | |
3626 | * Disable all interrupts from this port. | |
3627 | */ | |
3628 | ||
3629 | static void stl_cd1400disableintrs(stlport_t *portp) | |
3630 | { | |
3631 | unsigned long flags; | |
3632 | ||
3633 | #ifdef DEBUG | |
3634 | printk("stl_cd1400disableintrs(portp=%x)\n", (int) portp); | |
3635 | #endif | |
3636 | save_flags(flags); | |
3637 | cli(); | |
3638 | BRDENABLE(portp->brdnr, portp->pagenr); | |
3639 | stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); | |
3640 | stl_cd1400setreg(portp, SRER, 0); | |
3641 | BRDDISABLE(portp->brdnr); | |
3642 | restore_flags(flags); | |
3643 | } | |
3644 | ||
3645 | /*****************************************************************************/ | |
3646 | ||
3647 | static void stl_cd1400sendbreak(stlport_t *portp, int len) | |
3648 | { | |
3649 | unsigned long flags; | |
3650 | ||
3651 | #ifdef DEBUG | |
3652 | printk("stl_cd1400sendbreak(portp=%x,len=%d)\n", (int) portp, len); | |
3653 | #endif | |
3654 | ||
3655 | save_flags(flags); | |
3656 | cli(); | |
3657 | BRDENABLE(portp->brdnr, portp->pagenr); | |
3658 | stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); | |
3659 | stl_cd1400setreg(portp, SRER, | |
3660 | ((stl_cd1400getreg(portp, SRER) & ~SRER_TXDATA) | | |
3661 | SRER_TXEMPTY)); | |
3662 | BRDDISABLE(portp->brdnr); | |
3663 | portp->brklen = len; | |
3664 | if (len == 1) | |
3665 | portp->stats.txbreaks++; | |
3666 | restore_flags(flags); | |
3667 | } | |
3668 | ||
3669 | /*****************************************************************************/ | |
3670 | ||
3671 | /* | |
3672 | * Take flow control actions... | |
3673 | */ | |
3674 | ||
3675 | static void stl_cd1400flowctrl(stlport_t *portp, int state) | |
3676 | { | |
3677 | struct tty_struct *tty; | |
3678 | unsigned long flags; | |
3679 | ||
3680 | #ifdef DEBUG | |
3681 | printk("stl_cd1400flowctrl(portp=%x,state=%x)\n", (int) portp, state); | |
3682 | #endif | |
3683 | ||
3684 | if (portp == (stlport_t *) NULL) | |
3685 | return; | |
3686 | tty = portp->tty; | |
3687 | if (tty == (struct tty_struct *) NULL) | |
3688 | return; | |
3689 | ||
3690 | save_flags(flags); | |
3691 | cli(); | |
3692 | BRDENABLE(portp->brdnr, portp->pagenr); | |
3693 | stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); | |
3694 | ||
3695 | if (state) { | |
3696 | if (tty->termios->c_iflag & IXOFF) { | |
3697 | stl_cd1400ccrwait(portp); | |
3698 | stl_cd1400setreg(portp, CCR, CCR_SENDSCHR1); | |
3699 | portp->stats.rxxon++; | |
3700 | stl_cd1400ccrwait(portp); | |
3701 | } | |
3702 | /* | |
3703 | * Question: should we return RTS to what it was before? It may | |
3704 | * have been set by an ioctl... Suppose not, since if you have | |
3705 | * hardware flow control set then it is pretty silly to go and | |
3706 | * set the RTS line by hand. | |
3707 | */ | |
3708 | if (tty->termios->c_cflag & CRTSCTS) { | |
3709 | stl_cd1400setreg(portp, MCOR1, | |
3710 | (stl_cd1400getreg(portp, MCOR1) | | |
3711 | FIFO_RTSTHRESHOLD)); | |
3712 | stl_cd1400setreg(portp, MSVR2, MSVR2_RTS); | |
3713 | portp->stats.rxrtson++; | |
3714 | } | |
3715 | } else { | |
3716 | if (tty->termios->c_iflag & IXOFF) { | |
3717 | stl_cd1400ccrwait(portp); | |
3718 | stl_cd1400setreg(portp, CCR, CCR_SENDSCHR2); | |
3719 | portp->stats.rxxoff++; | |
3720 | stl_cd1400ccrwait(portp); | |
3721 | } | |
3722 | if (tty->termios->c_cflag & CRTSCTS) { | |
3723 | stl_cd1400setreg(portp, MCOR1, | |
3724 | (stl_cd1400getreg(portp, MCOR1) & 0xf0)); | |
3725 | stl_cd1400setreg(portp, MSVR2, 0); | |
3726 | portp->stats.rxrtsoff++; | |
3727 | } | |
3728 | } | |
3729 | ||
3730 | BRDDISABLE(portp->brdnr); | |
3731 | restore_flags(flags); | |
3732 | } | |
3733 | ||
3734 | /*****************************************************************************/ | |
3735 | ||
3736 | /* | |
3737 | * Send a flow control character... | |
3738 | */ | |
3739 | ||
3740 | static void stl_cd1400sendflow(stlport_t *portp, int state) | |
3741 | { | |
3742 | struct tty_struct *tty; | |
3743 | unsigned long flags; | |
3744 | ||
3745 | #ifdef DEBUG | |
3746 | printk("stl_cd1400sendflow(portp=%x,state=%x)\n", (int) portp, state); | |
3747 | #endif | |
3748 | ||
3749 | if (portp == (stlport_t *) NULL) | |
3750 | return; | |
3751 | tty = portp->tty; | |
3752 | if (tty == (struct tty_struct *) NULL) | |
3753 | return; | |
3754 | ||
3755 | save_flags(flags); | |
3756 | cli(); | |
3757 | BRDENABLE(portp->brdnr, portp->pagenr); | |
3758 | stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); | |
3759 | if (state) { | |
3760 | stl_cd1400ccrwait(portp); | |
3761 | stl_cd1400setreg(portp, CCR, CCR_SENDSCHR1); | |
3762 | portp->stats.rxxon++; | |
3763 | stl_cd1400ccrwait(portp); | |
3764 | } else { | |
3765 | stl_cd1400ccrwait(portp); | |
3766 | stl_cd1400setreg(portp, CCR, CCR_SENDSCHR2); | |
3767 | portp->stats.rxxoff++; | |
3768 | stl_cd1400ccrwait(portp); | |
3769 | } | |
3770 | BRDDISABLE(portp->brdnr); | |
3771 | restore_flags(flags); | |
3772 | } | |
3773 | ||
3774 | /*****************************************************************************/ | |
3775 | ||
3776 | static void stl_cd1400flush(stlport_t *portp) | |
3777 | { | |
3778 | unsigned long flags; | |
3779 | ||
3780 | #ifdef DEBUG | |
3781 | printk("stl_cd1400flush(portp=%x)\n", (int) portp); | |
3782 | #endif | |
3783 | ||
3784 | if (portp == (stlport_t *) NULL) | |
3785 | return; | |
3786 | ||
3787 | save_flags(flags); | |
3788 | cli(); | |
3789 | BRDENABLE(portp->brdnr, portp->pagenr); | |
3790 | stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03)); | |
3791 | stl_cd1400ccrwait(portp); | |
3792 | stl_cd1400setreg(portp, CCR, CCR_TXFLUSHFIFO); | |
3793 | stl_cd1400ccrwait(portp); | |
3794 | portp->tx.tail = portp->tx.head; | |
3795 | BRDDISABLE(portp->brdnr); | |
3796 | restore_flags(flags); | |
3797 | } | |
3798 | ||
3799 | /*****************************************************************************/ | |
3800 | ||
3801 | /* | |
3802 | * Return the current state of data flow on this port. This is only | |
3803 | * really interresting when determining if data has fully completed | |
3804 | * transmission or not... This is easy for the cd1400, it accurately | |
3805 | * maintains the busy port flag. | |
3806 | */ | |
3807 | ||
3808 | static int stl_cd1400datastate(stlport_t *portp) | |
3809 | { | |
3810 | #ifdef DEBUG | |
3811 | printk("stl_cd1400datastate(portp=%x)\n", (int) portp); | |
3812 | #endif | |
3813 | ||
3814 | if (portp == (stlport_t *) NULL) | |
014c2544 | 3815 | return 0; |
1da177e4 | 3816 | |
014c2544 | 3817 | return test_bit(ASYI_TXBUSY, &portp->istate) ? 1 : 0; |
1da177e4 LT |
3818 | } |
3819 | ||
3820 | /*****************************************************************************/ | |
3821 | ||
3822 | /* | |
3823 | * Interrupt service routine for cd1400 EasyIO boards. | |
3824 | */ | |
3825 | ||
3826 | static void stl_cd1400eiointr(stlpanel_t *panelp, unsigned int iobase) | |
3827 | { | |
3828 | unsigned char svrtype; | |
3829 | ||
3830 | #ifdef DEBUG | |
3831 | printk("stl_cd1400eiointr(panelp=%x,iobase=%x)\n", | |
3832 | (int) panelp, iobase); | |
3833 | #endif | |
3834 | ||
3835 | outb(SVRR, iobase); | |
3836 | svrtype = inb(iobase + EREG_DATA); | |
3837 | if (panelp->nrports > 4) { | |
3838 | outb((SVRR + 0x80), iobase); | |
3839 | svrtype |= inb(iobase + EREG_DATA); | |
3840 | } | |
3841 | ||
3842 | if (svrtype & SVRR_RX) | |
3843 | stl_cd1400rxisr(panelp, iobase); | |
3844 | else if (svrtype & SVRR_TX) | |
3845 | stl_cd1400txisr(panelp, iobase); | |
3846 | else if (svrtype & SVRR_MDM) | |
3847 | stl_cd1400mdmisr(panelp, iobase); | |
3848 | } | |
3849 | ||
3850 | /*****************************************************************************/ | |
3851 | ||
3852 | /* | |
3853 | * Interrupt service routine for cd1400 panels. | |
3854 | */ | |
3855 | ||
3856 | static void stl_cd1400echintr(stlpanel_t *panelp, unsigned int iobase) | |
3857 | { | |
3858 | unsigned char svrtype; | |
3859 | ||
3860 | #ifdef DEBUG | |
3861 | printk("stl_cd1400echintr(panelp=%x,iobase=%x)\n", (int) panelp, | |
3862 | iobase); | |
3863 | #endif | |
3864 | ||
3865 | outb(SVRR, iobase); | |
3866 | svrtype = inb(iobase + EREG_DATA); | |
3867 | outb((SVRR + 0x80), iobase); | |
3868 | svrtype |= inb(iobase + EREG_DATA); | |
3869 | if (svrtype & SVRR_RX) | |
3870 | stl_cd1400rxisr(panelp, iobase); | |
3871 | else if (svrtype & SVRR_TX) | |
3872 | stl_cd1400txisr(panelp, iobase); | |
3873 | else if (svrtype & SVRR_MDM) | |
3874 | stl_cd1400mdmisr(panelp, iobase); | |
3875 | } | |
3876 | ||
3877 | ||
3878 | /*****************************************************************************/ | |
3879 | ||
3880 | /* | |
3881 | * Unfortunately we need to handle breaks in the TX data stream, since | |
3882 | * this is the only way to generate them on the cd1400. | |
3883 | */ | |
3884 | ||
3885 | static inline int stl_cd1400breakisr(stlport_t *portp, int ioaddr) | |
3886 | { | |
3887 | if (portp->brklen == 1) { | |
3888 | outb((COR2 + portp->uartaddr), ioaddr); | |
3889 | outb((inb(ioaddr + EREG_DATA) | COR2_ETC), | |
3890 | (ioaddr + EREG_DATA)); | |
3891 | outb((TDR + portp->uartaddr), ioaddr); | |
3892 | outb(ETC_CMD, (ioaddr + EREG_DATA)); | |
3893 | outb(ETC_STARTBREAK, (ioaddr + EREG_DATA)); | |
3894 | outb((SRER + portp->uartaddr), ioaddr); | |
3895 | outb((inb(ioaddr + EREG_DATA) & ~(SRER_TXDATA | SRER_TXEMPTY)), | |
3896 | (ioaddr + EREG_DATA)); | |
014c2544 | 3897 | return 1; |
1da177e4 LT |
3898 | } else if (portp->brklen > 1) { |
3899 | outb((TDR + portp->uartaddr), ioaddr); | |
3900 | outb(ETC_CMD, (ioaddr + EREG_DATA)); | |
3901 | outb(ETC_STOPBREAK, (ioaddr + EREG_DATA)); | |
3902 | portp->brklen = -1; | |
014c2544 | 3903 | return 1; |
1da177e4 LT |
3904 | } else { |
3905 | outb((COR2 + portp->uartaddr), ioaddr); | |
3906 | outb((inb(ioaddr + EREG_DATA) & ~COR2_ETC), | |
3907 | (ioaddr + EREG_DATA)); | |
3908 | portp->brklen = 0; | |
3909 | } | |
014c2544 | 3910 | return 0; |
1da177e4 LT |
3911 | } |
3912 | ||
3913 | /*****************************************************************************/ | |
3914 | ||
3915 | /* | |
3916 | * Transmit interrupt handler. This has gotta be fast! Handling TX | |
3917 | * chars is pretty simple, stuff as many as possible from the TX buffer | |
3918 | * into the cd1400 FIFO. Must also handle TX breaks here, since they | |
3919 | * are embedded as commands in the data stream. Oh no, had to use a goto! | |
3920 | * This could be optimized more, will do when I get time... | |
3921 | * In practice it is possible that interrupts are enabled but that the | |
3922 | * port has been hung up. Need to handle not having any TX buffer here, | |
3923 | * this is done by using the side effect that head and tail will also | |
3924 | * be NULL if the buffer has been freed. | |
3925 | */ | |
3926 | ||
3927 | static void stl_cd1400txisr(stlpanel_t *panelp, int ioaddr) | |
3928 | { | |
3929 | stlport_t *portp; | |
3930 | int len, stlen; | |
3931 | char *head, *tail; | |
3932 | unsigned char ioack, srer; | |
3933 | ||
3934 | #ifdef DEBUG | |
3935 | printk("stl_cd1400txisr(panelp=%x,ioaddr=%x)\n", (int) panelp, ioaddr); | |
3936 | #endif | |
3937 | ||
3938 | ioack = inb(ioaddr + EREG_TXACK); | |
3939 | if (((ioack & panelp->ackmask) != 0) || | |
3940 | ((ioack & ACK_TYPMASK) != ACK_TYPTX)) { | |
3941 | printk("STALLION: bad TX interrupt ack value=%x\n", ioack); | |
3942 | return; | |
3943 | } | |
3944 | portp = panelp->ports[(ioack >> 3)]; | |
3945 | ||
3946 | /* | |
3947 | * Unfortunately we need to handle breaks in the data stream, since | |
3948 | * this is the only way to generate them on the cd1400. Do it now if | |
3949 | * a break is to be sent. | |
3950 | */ | |
3951 | if (portp->brklen != 0) | |
3952 | if (stl_cd1400breakisr(portp, ioaddr)) | |
3953 | goto stl_txalldone; | |
3954 | ||
3955 | head = portp->tx.head; | |
3956 | tail = portp->tx.tail; | |
3957 | len = (head >= tail) ? (head - tail) : (STL_TXBUFSIZE - (tail - head)); | |
3958 | if ((len == 0) || ((len < STL_TXBUFLOW) && | |
3959 | (test_bit(ASYI_TXLOW, &portp->istate) == 0))) { | |
3960 | set_bit(ASYI_TXLOW, &portp->istate); | |
3961 | schedule_work(&portp->tqueue); | |
3962 | } | |
3963 | ||
3964 | if (len == 0) { | |
3965 | outb((SRER + portp->uartaddr), ioaddr); | |
3966 | srer = inb(ioaddr + EREG_DATA); | |
3967 | if (srer & SRER_TXDATA) { | |
3968 | srer = (srer & ~SRER_TXDATA) | SRER_TXEMPTY; | |
3969 | } else { | |
3970 | srer &= ~(SRER_TXDATA | SRER_TXEMPTY); | |
3971 | clear_bit(ASYI_TXBUSY, &portp->istate); | |
3972 | } | |
3973 | outb(srer, (ioaddr + EREG_DATA)); | |
3974 | } else { | |
3975 | len = MIN(len, CD1400_TXFIFOSIZE); | |
3976 | portp->stats.txtotal += len; | |
3977 | stlen = MIN(len, ((portp->tx.buf + STL_TXBUFSIZE) - tail)); | |
3978 | outb((TDR + portp->uartaddr), ioaddr); | |
3979 | outsb((ioaddr + EREG_DATA), tail, stlen); | |
3980 | len -= stlen; | |
3981 | tail += stlen; | |
3982 | if (tail >= (portp->tx.buf + STL_TXBUFSIZE)) | |
3983 | tail = portp->tx.buf; | |
3984 | if (len > 0) { | |
3985 | outsb((ioaddr + EREG_DATA), tail, len); | |
3986 | tail += len; | |
3987 | } | |
3988 | portp->tx.tail = tail; | |
3989 | } | |
3990 | ||
3991 | stl_txalldone: | |
3992 | outb((EOSRR + portp->uartaddr), ioaddr); | |
3993 | outb(0, (ioaddr + EREG_DATA)); | |
3994 | } | |
3995 | ||
3996 | /*****************************************************************************/ | |
3997 | ||
3998 | /* | |
3999 | * Receive character interrupt handler. Determine if we have good chars | |
4000 | * or bad chars and then process appropriately. Good chars are easy | |
4001 | * just shove the lot into the RX buffer and set all status byte to 0. | |
4002 | * If a bad RX char then process as required. This routine needs to be | |
4003 | * fast! In practice it is possible that we get an interrupt on a port | |
4004 | * that is closed. This can happen on hangups - since they completely | |
4005 | * shutdown a port not in user context. Need to handle this case. | |
4006 | */ | |
4007 | ||
4008 | static void stl_cd1400rxisr(stlpanel_t *panelp, int ioaddr) | |
4009 | { | |
4010 | stlport_t *portp; | |
4011 | struct tty_struct *tty; | |
4012 | unsigned int ioack, len, buflen; | |
4013 | unsigned char status; | |
4014 | char ch; | |
4015 | ||
4016 | #ifdef DEBUG | |
4017 | printk("stl_cd1400rxisr(panelp=%x,ioaddr=%x)\n", (int) panelp, ioaddr); | |
4018 | #endif | |
4019 | ||
4020 | ioack = inb(ioaddr + EREG_RXACK); | |
4021 | if ((ioack & panelp->ackmask) != 0) { | |
4022 | printk("STALLION: bad RX interrupt ack value=%x\n", ioack); | |
4023 | return; | |
4024 | } | |
4025 | portp = panelp->ports[(ioack >> 3)]; | |
4026 | tty = portp->tty; | |
4027 | ||
4028 | if ((ioack & ACK_TYPMASK) == ACK_TYPRXGOOD) { | |
4029 | outb((RDCR + portp->uartaddr), ioaddr); | |
4030 | len = inb(ioaddr + EREG_DATA); | |
33f0f88f | 4031 | if (tty == NULL || (buflen = tty_buffer_request_room(tty, len)) == 0) { |
1da177e4 LT |
4032 | len = MIN(len, sizeof(stl_unwanted)); |
4033 | outb((RDSR + portp->uartaddr), ioaddr); | |
4034 | insb((ioaddr + EREG_DATA), &stl_unwanted[0], len); | |
4035 | portp->stats.rxlost += len; | |
4036 | portp->stats.rxtotal += len; | |
4037 | } else { | |
4038 | len = MIN(len, buflen); | |
4039 | if (len > 0) { | |
33f0f88f | 4040 | unsigned char *ptr; |
1da177e4 | 4041 | outb((RDSR + portp->uartaddr), ioaddr); |
33f0f88f AC |
4042 | tty_prepare_flip_string(tty, &ptr, len); |
4043 | insb((ioaddr + EREG_DATA), ptr, len); | |
1da177e4 LT |
4044 | tty_schedule_flip(tty); |
4045 | portp->stats.rxtotal += len; | |
4046 | } | |
4047 | } | |
4048 | } else if ((ioack & ACK_TYPMASK) == ACK_TYPRXBAD) { | |
4049 | outb((RDSR + portp->uartaddr), ioaddr); | |
4050 | status = inb(ioaddr + EREG_DATA); | |
4051 | ch = inb(ioaddr + EREG_DATA); | |
4052 | if (status & ST_PARITY) | |
4053 | portp->stats.rxparity++; | |
4054 | if (status & ST_FRAMING) | |
4055 | portp->stats.rxframing++; | |
4056 | if (status & ST_OVERRUN) | |
4057 | portp->stats.rxoverrun++; | |
4058 | if (status & ST_BREAK) | |
4059 | portp->stats.rxbreaks++; | |
4060 | if (status & ST_SCHARMASK) { | |
4061 | if ((status & ST_SCHARMASK) == ST_SCHAR1) | |
4062 | portp->stats.txxon++; | |
4063 | if ((status & ST_SCHARMASK) == ST_SCHAR2) | |
4064 | portp->stats.txxoff++; | |
4065 | goto stl_rxalldone; | |
4066 | } | |
33f0f88f | 4067 | if (tty != NULL && (portp->rxignoremsk & status) == 0) { |
1da177e4 LT |
4068 | if (portp->rxmarkmsk & status) { |
4069 | if (status & ST_BREAK) { | |
4070 | status = TTY_BREAK; | |
4071 | if (portp->flags & ASYNC_SAK) { | |
4072 | do_SAK(tty); | |
4073 | BRDENABLE(portp->brdnr, portp->pagenr); | |
4074 | } | |
4075 | } else if (status & ST_PARITY) { | |
4076 | status = TTY_PARITY; | |
4077 | } else if (status & ST_FRAMING) { | |
4078 | status = TTY_FRAME; | |
4079 | } else if(status & ST_OVERRUN) { | |
4080 | status = TTY_OVERRUN; | |
4081 | } else { | |
4082 | status = 0; | |
4083 | } | |
4084 | } else { | |
4085 | status = 0; | |
4086 | } | |
33f0f88f AC |
4087 | tty_insert_flip_char(tty, ch, status); |
4088 | tty_schedule_flip(tty); | |
1da177e4 LT |
4089 | } |
4090 | } else { | |
4091 | printk("STALLION: bad RX interrupt ack value=%x\n", ioack); | |
4092 | return; | |
4093 | } | |
4094 | ||
4095 | stl_rxalldone: | |
4096 | outb((EOSRR + portp->uartaddr), ioaddr); | |
4097 | outb(0, (ioaddr + EREG_DATA)); | |
4098 | } | |
4099 | ||
4100 | /*****************************************************************************/ | |
4101 | ||
4102 | /* | |
4103 | * Modem interrupt handler. The is called when the modem signal line | |
4104 | * (DCD) has changed state. Leave most of the work to the off-level | |
4105 | * processing routine. | |
4106 | */ | |
4107 | ||
4108 | static void stl_cd1400mdmisr(stlpanel_t *panelp, int ioaddr) | |
4109 | { | |
4110 | stlport_t *portp; | |
4111 | unsigned int ioack; | |
4112 | unsigned char misr; | |
4113 | ||
4114 | #ifdef DEBUG | |
4115 | printk("stl_cd1400mdmisr(panelp=%x)\n", (int) panelp); | |
4116 | #endif | |
4117 | ||
4118 | ioack = inb(ioaddr + EREG_MDACK); | |
4119 | if (((ioack & panelp->ackmask) != 0) || | |
4120 | ((ioack & ACK_TYPMASK) != ACK_TYPMDM)) { | |
4121 | printk("STALLION: bad MODEM interrupt ack value=%x\n", ioack); | |
4122 | return; | |
4123 | } | |
4124 | portp = panelp->ports[(ioack >> 3)]; | |
4125 | ||
4126 | outb((MISR + portp->uartaddr), ioaddr); | |
4127 | misr = inb(ioaddr + EREG_DATA); | |
4128 | if (misr & MISR_DCD) { | |
4129 | set_bit(ASYI_DCDCHANGE, &portp->istate); | |
4130 | schedule_work(&portp->tqueue); | |
4131 | portp->stats.modem++; | |
4132 | } | |
4133 | ||
4134 | outb((EOSRR + portp->uartaddr), ioaddr); | |
4135 | outb(0, (ioaddr + EREG_DATA)); | |
4136 | } | |
4137 | ||
4138 | /*****************************************************************************/ | |
4139 | /* SC26198 HARDWARE FUNCTIONS */ | |
4140 | /*****************************************************************************/ | |
4141 | ||
4142 | /* | |
4143 | * These functions get/set/update the registers of the sc26198 UARTs. | |
4144 | * Access to the sc26198 registers is via an address/data io port pair. | |
4145 | * (Maybe should make this inline...) | |
4146 | */ | |
4147 | ||
4148 | static int stl_sc26198getreg(stlport_t *portp, int regnr) | |
4149 | { | |
4150 | outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR)); | |
014c2544 | 4151 | return inb(portp->ioaddr + XP_DATA); |
1da177e4 LT |
4152 | } |
4153 | ||
4154 | static void stl_sc26198setreg(stlport_t *portp, int regnr, int value) | |
4155 | { | |
4156 | outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR)); | |
4157 | outb(value, (portp->ioaddr + XP_DATA)); | |
4158 | } | |
4159 | ||
4160 | static int stl_sc26198updatereg(stlport_t *portp, int regnr, int value) | |
4161 | { | |
4162 | outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR)); | |
4163 | if (inb(portp->ioaddr + XP_DATA) != value) { | |
4164 | outb(value, (portp->ioaddr + XP_DATA)); | |
014c2544 | 4165 | return 1; |
1da177e4 | 4166 | } |
014c2544 | 4167 | return 0; |
1da177e4 LT |
4168 | } |
4169 | ||
4170 | /*****************************************************************************/ | |
4171 | ||
4172 | /* | |
4173 | * Functions to get and set the sc26198 global registers. | |
4174 | */ | |
4175 | ||
4176 | static int stl_sc26198getglobreg(stlport_t *portp, int regnr) | |
4177 | { | |
4178 | outb(regnr, (portp->ioaddr + XP_ADDR)); | |
014c2544 | 4179 | return inb(portp->ioaddr + XP_DATA); |
1da177e4 LT |
4180 | } |
4181 | ||
4182 | #if 0 | |
4183 | static void stl_sc26198setglobreg(stlport_t *portp, int regnr, int value) | |
4184 | { | |
4185 | outb(regnr, (portp->ioaddr + XP_ADDR)); | |
4186 | outb(value, (portp->ioaddr + XP_DATA)); | |
4187 | } | |
4188 | #endif | |
4189 | ||
4190 | /*****************************************************************************/ | |
4191 | ||
4192 | /* | |
4193 | * Inbitialize the UARTs in a panel. We don't care what sort of board | |
4194 | * these ports are on - since the port io registers are almost | |
4195 | * identical when dealing with ports. | |
4196 | */ | |
4197 | ||
4198 | static int stl_sc26198panelinit(stlbrd_t *brdp, stlpanel_t *panelp) | |
4199 | { | |
4200 | int chipmask, i; | |
4201 | int nrchips, ioaddr; | |
4202 | ||
4203 | #ifdef DEBUG | |
4204 | printk("stl_sc26198panelinit(brdp=%x,panelp=%x)\n", | |
4205 | (int) brdp, (int) panelp); | |
4206 | #endif | |
4207 | ||
4208 | BRDENABLE(panelp->brdnr, panelp->pagenr); | |
4209 | ||
4210 | /* | |
4211 | * Check that each chip is present and started up OK. | |
4212 | */ | |
4213 | chipmask = 0; | |
4214 | nrchips = (panelp->nrports + 4) / SC26198_PORTS; | |
4215 | if (brdp->brdtype == BRD_ECHPCI) | |
4216 | outb(panelp->pagenr, brdp->ioctrl); | |
4217 | ||
4218 | for (i = 0; (i < nrchips); i++) { | |
4219 | ioaddr = panelp->iobase + (i * 4); | |
4220 | outb(SCCR, (ioaddr + XP_ADDR)); | |
4221 | outb(CR_RESETALL, (ioaddr + XP_DATA)); | |
4222 | outb(TSTR, (ioaddr + XP_ADDR)); | |
4223 | if (inb(ioaddr + XP_DATA) != 0) { | |
4224 | printk("STALLION: sc26198 not responding, " | |
4225 | "brd=%d panel=%d chip=%d\n", | |
4226 | panelp->brdnr, panelp->panelnr, i); | |
4227 | continue; | |
4228 | } | |
4229 | chipmask |= (0x1 << i); | |
4230 | outb(GCCR, (ioaddr + XP_ADDR)); | |
4231 | outb(GCCR_IVRTYPCHANACK, (ioaddr + XP_DATA)); | |
4232 | outb(WDTRCR, (ioaddr + XP_ADDR)); | |
4233 | outb(0xff, (ioaddr + XP_DATA)); | |
4234 | } | |
4235 | ||
4236 | BRDDISABLE(panelp->brdnr); | |
014c2544 | 4237 | return chipmask; |
1da177e4 LT |
4238 | } |
4239 | ||
4240 | /*****************************************************************************/ | |
4241 | ||
4242 | /* | |
4243 | * Initialize hardware specific port registers. | |
4244 | */ | |
4245 | ||
4246 | static void stl_sc26198portinit(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *portp) | |
4247 | { | |
4248 | #ifdef DEBUG | |
4249 | printk("stl_sc26198portinit(brdp=%x,panelp=%x,portp=%x)\n", | |
4250 | (int) brdp, (int) panelp, (int) portp); | |
4251 | #endif | |
4252 | ||
4253 | if ((brdp == (stlbrd_t *) NULL) || (panelp == (stlpanel_t *) NULL) || | |
4254 | (portp == (stlport_t *) NULL)) | |
4255 | return; | |
4256 | ||
4257 | portp->ioaddr = panelp->iobase + ((portp->portnr < 8) ? 0 : 4); | |
4258 | portp->uartaddr = (portp->portnr & 0x07) << 4; | |
4259 | portp->pagenr = panelp->pagenr; | |
4260 | portp->hwid = 0x1; | |
4261 | ||
4262 | BRDENABLE(portp->brdnr, portp->pagenr); | |
4263 | stl_sc26198setreg(portp, IOPCR, IOPCR_SETSIGS); | |
4264 | BRDDISABLE(portp->brdnr); | |
4265 | } | |
4266 | ||
4267 | /*****************************************************************************/ | |
4268 | ||
4269 | /* | |
4270 | * Set up the sc26198 registers for a port based on the termios port | |
4271 | * settings. | |
4272 | */ | |
4273 | ||
4274 | static void stl_sc26198setport(stlport_t *portp, struct termios *tiosp) | |
4275 | { | |
4276 | stlbrd_t *brdp; | |
4277 | unsigned long flags; | |
4278 | unsigned int baudrate; | |
4279 | unsigned char mr0, mr1, mr2, clk; | |
4280 | unsigned char imron, imroff, iopr, ipr; | |
4281 | ||
4282 | mr0 = 0; | |
4283 | mr1 = 0; | |
4284 | mr2 = 0; | |
4285 | clk = 0; | |
4286 | iopr = 0; | |
4287 | imron = 0; | |
4288 | imroff = 0; | |
4289 | ||
4290 | brdp = stl_brds[portp->brdnr]; | |
4291 | if (brdp == (stlbrd_t *) NULL) | |
4292 | return; | |
4293 | ||
4294 | /* | |
4295 | * Set up the RX char ignore mask with those RX error types we | |
4296 | * can ignore. | |
4297 | */ | |
4298 | portp->rxignoremsk = 0; | |
4299 | if (tiosp->c_iflag & IGNPAR) | |
4300 | portp->rxignoremsk |= (SR_RXPARITY | SR_RXFRAMING | | |
4301 | SR_RXOVERRUN); | |
4302 | if (tiosp->c_iflag & IGNBRK) | |
4303 | portp->rxignoremsk |= SR_RXBREAK; | |
4304 | ||
4305 | portp->rxmarkmsk = SR_RXOVERRUN; | |
4306 | if (tiosp->c_iflag & (INPCK | PARMRK)) | |
4307 | portp->rxmarkmsk |= (SR_RXPARITY | SR_RXFRAMING); | |
4308 | if (tiosp->c_iflag & BRKINT) | |
4309 | portp->rxmarkmsk |= SR_RXBREAK; | |
4310 | ||
4311 | /* | |
4312 | * Go through the char size, parity and stop bits and set all the | |
4313 | * option register appropriately. | |
4314 | */ | |
4315 | switch (tiosp->c_cflag & CSIZE) { | |
4316 | case CS5: | |
4317 | mr1 |= MR1_CS5; | |
4318 | break; | |
4319 | case CS6: | |
4320 | mr1 |= MR1_CS6; | |
4321 | break; | |
4322 | case CS7: | |
4323 | mr1 |= MR1_CS7; | |
4324 | break; | |
4325 | default: | |
4326 | mr1 |= MR1_CS8; | |
4327 | break; | |
4328 | } | |
4329 | ||
4330 | if (tiosp->c_cflag & CSTOPB) | |
4331 | mr2 |= MR2_STOP2; | |
4332 | else | |
4333 | mr2 |= MR2_STOP1; | |
4334 | ||
4335 | if (tiosp->c_cflag & PARENB) { | |
4336 | if (tiosp->c_cflag & PARODD) | |
4337 | mr1 |= (MR1_PARENB | MR1_PARODD); | |
4338 | else | |
4339 | mr1 |= (MR1_PARENB | MR1_PAREVEN); | |
4340 | } else { | |
4341 | mr1 |= MR1_PARNONE; | |
4342 | } | |
4343 | ||
4344 | mr1 |= MR1_ERRBLOCK; | |
4345 | ||
4346 | /* | |
4347 | * Set the RX FIFO threshold at 8 chars. This gives a bit of breathing | |
4348 | * space for hardware flow control and the like. This should be set to | |
4349 | * VMIN. | |
4350 | */ | |
4351 | mr2 |= MR2_RXFIFOHALF; | |
4352 | ||
4353 | /* | |
4354 | * Calculate the baud rate timers. For now we will just assume that | |
4355 | * the input and output baud are the same. The sc26198 has a fixed | |
4356 | * baud rate table, so only discrete baud rates possible. | |
4357 | */ | |
4358 | baudrate = tiosp->c_cflag & CBAUD; | |
4359 | if (baudrate & CBAUDEX) { | |
4360 | baudrate &= ~CBAUDEX; | |
4361 | if ((baudrate < 1) || (baudrate > 4)) | |
4362 | tiosp->c_cflag &= ~CBAUDEX; | |
4363 | else | |
4364 | baudrate += 15; | |
4365 | } | |
4366 | baudrate = stl_baudrates[baudrate]; | |
4367 | if ((tiosp->c_cflag & CBAUD) == B38400) { | |
4368 | if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) | |
4369 | baudrate = 57600; | |
4370 | else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) | |
4371 | baudrate = 115200; | |
4372 | else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) | |
4373 | baudrate = 230400; | |
4374 | else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) | |
4375 | baudrate = 460800; | |
4376 | else if ((portp->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) | |
4377 | baudrate = (portp->baud_base / portp->custom_divisor); | |
4378 | } | |
4379 | if (baudrate > STL_SC26198MAXBAUD) | |
4380 | baudrate = STL_SC26198MAXBAUD; | |
4381 | ||
4382 | if (baudrate > 0) { | |
4383 | for (clk = 0; (clk < SC26198_NRBAUDS); clk++) { | |
4384 | if (baudrate <= sc26198_baudtable[clk]) | |
4385 | break; | |
4386 | } | |
4387 | } | |
4388 | ||
4389 | /* | |
4390 | * Check what form of modem signaling is required and set it up. | |
4391 | */ | |
4392 | if (tiosp->c_cflag & CLOCAL) { | |
4393 | portp->flags &= ~ASYNC_CHECK_CD; | |
4394 | } else { | |
4395 | iopr |= IOPR_DCDCOS; | |
4396 | imron |= IR_IOPORT; | |
4397 | portp->flags |= ASYNC_CHECK_CD; | |
4398 | } | |
4399 | ||
4400 | /* | |
4401 | * Setup sc26198 enhanced modes if we can. In particular we want to | |
4402 | * handle as much of the flow control as possible automatically. As | |
4403 | * well as saving a few CPU cycles it will also greatly improve flow | |
4404 | * control reliability. | |
4405 | */ | |
4406 | if (tiosp->c_iflag & IXON) { | |
4407 | mr0 |= MR0_SWFTX | MR0_SWFT; | |
4408 | imron |= IR_XONXOFF; | |
4409 | } else { | |
4410 | imroff |= IR_XONXOFF; | |
4411 | } | |
4412 | if (tiosp->c_iflag & IXOFF) | |
4413 | mr0 |= MR0_SWFRX; | |
4414 | ||
4415 | if (tiosp->c_cflag & CRTSCTS) { | |
4416 | mr2 |= MR2_AUTOCTS; | |
4417 | mr1 |= MR1_AUTORTS; | |
4418 | } | |
4419 | ||
4420 | /* | |
4421 | * All sc26198 register values calculated so go through and set | |
4422 | * them all up. | |
4423 | */ | |
4424 | ||
4425 | #ifdef DEBUG | |
4426 | printk("SETPORT: portnr=%d panelnr=%d brdnr=%d\n", | |
4427 | portp->portnr, portp->panelnr, portp->brdnr); | |
4428 | printk(" mr0=%x mr1=%x mr2=%x clk=%x\n", mr0, mr1, mr2, clk); | |
4429 | printk(" iopr=%x imron=%x imroff=%x\n", iopr, imron, imroff); | |
4430 | printk(" schr1=%x schr2=%x schr3=%x schr4=%x\n", | |
4431 | tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP], | |
4432 | tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP]); | |
4433 | #endif | |
4434 | ||
4435 | save_flags(flags); | |
4436 | cli(); | |
4437 | BRDENABLE(portp->brdnr, portp->pagenr); | |
4438 | stl_sc26198setreg(portp, IMR, 0); | |
4439 | stl_sc26198updatereg(portp, MR0, mr0); | |
4440 | stl_sc26198updatereg(portp, MR1, mr1); | |
4441 | stl_sc26198setreg(portp, SCCR, CR_RXERRBLOCK); | |
4442 | stl_sc26198updatereg(portp, MR2, mr2); | |
4443 | stl_sc26198updatereg(portp, IOPIOR, | |
4444 | ((stl_sc26198getreg(portp, IOPIOR) & ~IPR_CHANGEMASK) | iopr)); | |
4445 | ||
4446 | if (baudrate > 0) { | |
4447 | stl_sc26198setreg(portp, TXCSR, clk); | |
4448 | stl_sc26198setreg(portp, RXCSR, clk); | |
4449 | } | |
4450 | ||
4451 | stl_sc26198setreg(portp, XONCR, tiosp->c_cc[VSTART]); | |
4452 | stl_sc26198setreg(portp, XOFFCR, tiosp->c_cc[VSTOP]); | |
4453 | ||
4454 | ipr = stl_sc26198getreg(portp, IPR); | |
4455 | if (ipr & IPR_DCD) | |
4456 | portp->sigs &= ~TIOCM_CD; | |
4457 | else | |
4458 | portp->sigs |= TIOCM_CD; | |
4459 | ||
4460 | portp->imr = (portp->imr & ~imroff) | imron; | |
4461 | stl_sc26198setreg(portp, IMR, portp->imr); | |
4462 | BRDDISABLE(portp->brdnr); | |
4463 | restore_flags(flags); | |
4464 | } | |
4465 | ||
4466 | /*****************************************************************************/ | |
4467 | ||
4468 | /* | |
4469 | * Set the state of the DTR and RTS signals. | |
4470 | */ | |
4471 | ||
4472 | static void stl_sc26198setsignals(stlport_t *portp, int dtr, int rts) | |
4473 | { | |
4474 | unsigned char iopioron, iopioroff; | |
4475 | unsigned long flags; | |
4476 | ||
4477 | #ifdef DEBUG | |
4478 | printk("stl_sc26198setsignals(portp=%x,dtr=%d,rts=%d)\n", | |
4479 | (int) portp, dtr, rts); | |
4480 | #endif | |
4481 | ||
4482 | iopioron = 0; | |
4483 | iopioroff = 0; | |
4484 | if (dtr == 0) | |
4485 | iopioroff |= IPR_DTR; | |
4486 | else if (dtr > 0) | |
4487 | iopioron |= IPR_DTR; | |
4488 | if (rts == 0) | |
4489 | iopioroff |= IPR_RTS; | |
4490 | else if (rts > 0) | |
4491 | iopioron |= IPR_RTS; | |
4492 | ||
4493 | save_flags(flags); | |
4494 | cli(); | |
4495 | BRDENABLE(portp->brdnr, portp->pagenr); | |
4496 | stl_sc26198setreg(portp, IOPIOR, | |
4497 | ((stl_sc26198getreg(portp, IOPIOR) & ~iopioroff) | iopioron)); | |
4498 | BRDDISABLE(portp->brdnr); | |
4499 | restore_flags(flags); | |
4500 | } | |
4501 | ||
4502 | /*****************************************************************************/ | |
4503 | ||
4504 | /* | |
4505 | * Return the state of the signals. | |
4506 | */ | |
4507 | ||
4508 | static int stl_sc26198getsignals(stlport_t *portp) | |
4509 | { | |
4510 | unsigned char ipr; | |
4511 | unsigned long flags; | |
4512 | int sigs; | |
4513 | ||
4514 | #ifdef DEBUG | |
4515 | printk("stl_sc26198getsignals(portp=%x)\n", (int) portp); | |
4516 | #endif | |
4517 | ||
4518 | save_flags(flags); | |
4519 | cli(); | |
4520 | BRDENABLE(portp->brdnr, portp->pagenr); | |
4521 | ipr = stl_sc26198getreg(portp, IPR); | |
4522 | BRDDISABLE(portp->brdnr); | |
4523 | restore_flags(flags); | |
4524 | ||
4525 | sigs = 0; | |
4526 | sigs |= (ipr & IPR_DCD) ? 0 : TIOCM_CD; | |
4527 | sigs |= (ipr & IPR_CTS) ? 0 : TIOCM_CTS; | |
4528 | sigs |= (ipr & IPR_DTR) ? 0: TIOCM_DTR; | |
4529 | sigs |= (ipr & IPR_RTS) ? 0: TIOCM_RTS; | |
4530 | sigs |= TIOCM_DSR; | |
014c2544 | 4531 | return sigs; |
1da177e4 LT |
4532 | } |
4533 | ||
4534 | /*****************************************************************************/ | |
4535 | ||
4536 | /* | |
4537 | * Enable/Disable the Transmitter and/or Receiver. | |
4538 | */ | |
4539 | ||
4540 | static void stl_sc26198enablerxtx(stlport_t *portp, int rx, int tx) | |
4541 | { | |
4542 | unsigned char ccr; | |
4543 | unsigned long flags; | |
4544 | ||
4545 | #ifdef DEBUG | |
4546 | printk("stl_sc26198enablerxtx(portp=%x,rx=%d,tx=%d)\n", | |
4547 | (int) portp, rx, tx); | |
4548 | #endif | |
4549 | ||
4550 | ccr = portp->crenable; | |
4551 | if (tx == 0) | |
4552 | ccr &= ~CR_TXENABLE; | |
4553 | else if (tx > 0) | |
4554 | ccr |= CR_TXENABLE; | |
4555 | if (rx == 0) | |
4556 | ccr &= ~CR_RXENABLE; | |
4557 | else if (rx > 0) | |
4558 | ccr |= CR_RXENABLE; | |
4559 | ||
4560 | save_flags(flags); | |
4561 | cli(); | |
4562 | BRDENABLE(portp->brdnr, portp->pagenr); | |
4563 | stl_sc26198setreg(portp, SCCR, ccr); | |
4564 | BRDDISABLE(portp->brdnr); | |
4565 | portp->crenable = ccr; | |
4566 | restore_flags(flags); | |
4567 | } | |
4568 | ||
4569 | /*****************************************************************************/ | |
4570 | ||
4571 | /* | |
4572 | * Start/stop the Transmitter and/or Receiver. | |
4573 | */ | |
4574 | ||
4575 | static void stl_sc26198startrxtx(stlport_t *portp, int rx, int tx) | |
4576 | { | |
4577 | unsigned char imr; | |
4578 | unsigned long flags; | |
4579 | ||
4580 | #ifdef DEBUG | |
4581 | printk("stl_sc26198startrxtx(portp=%x,rx=%d,tx=%d)\n", | |
4582 | (int) portp, rx, tx); | |
4583 | #endif | |
4584 | ||
4585 | imr = portp->imr; | |
4586 | if (tx == 0) | |
4587 | imr &= ~IR_TXRDY; | |
4588 | else if (tx == 1) | |
4589 | imr |= IR_TXRDY; | |
4590 | if (rx == 0) | |
4591 | imr &= ~(IR_RXRDY | IR_RXBREAK | IR_RXWATCHDOG); | |
4592 | else if (rx > 0) | |
4593 | imr |= IR_RXRDY | IR_RXBREAK | IR_RXWATCHDOG; | |
4594 | ||
4595 | save_flags(flags); | |
4596 | cli(); | |
4597 | BRDENABLE(portp->brdnr, portp->pagenr); | |
4598 | stl_sc26198setreg(portp, IMR, imr); | |
4599 | BRDDISABLE(portp->brdnr); | |
4600 | portp->imr = imr; | |
4601 | if (tx > 0) | |
4602 | set_bit(ASYI_TXBUSY, &portp->istate); | |
4603 | restore_flags(flags); | |
4604 | } | |
4605 | ||
4606 | /*****************************************************************************/ | |
4607 | ||
4608 | /* | |
4609 | * Disable all interrupts from this port. | |
4610 | */ | |
4611 | ||
4612 | static void stl_sc26198disableintrs(stlport_t *portp) | |
4613 | { | |
4614 | unsigned long flags; | |
4615 | ||
4616 | #ifdef DEBUG | |
4617 | printk("stl_sc26198disableintrs(portp=%x)\n", (int) portp); | |
4618 | #endif | |
4619 | ||
4620 | save_flags(flags); | |
4621 | cli(); | |
4622 | BRDENABLE(portp->brdnr, portp->pagenr); | |
4623 | portp->imr = 0; | |
4624 | stl_sc26198setreg(portp, IMR, 0); | |
4625 | BRDDISABLE(portp->brdnr); | |
4626 | restore_flags(flags); | |
4627 | } | |
4628 | ||
4629 | /*****************************************************************************/ | |
4630 | ||
4631 | static void stl_sc26198sendbreak(stlport_t *portp, int len) | |
4632 | { | |
4633 | unsigned long flags; | |
4634 | ||
4635 | #ifdef DEBUG | |
4636 | printk("stl_sc26198sendbreak(portp=%x,len=%d)\n", (int) portp, len); | |
4637 | #endif | |
4638 | ||
4639 | save_flags(flags); | |
4640 | cli(); | |
4641 | BRDENABLE(portp->brdnr, portp->pagenr); | |
4642 | if (len == 1) { | |
4643 | stl_sc26198setreg(portp, SCCR, CR_TXSTARTBREAK); | |
4644 | portp->stats.txbreaks++; | |
4645 | } else { | |
4646 | stl_sc26198setreg(portp, SCCR, CR_TXSTOPBREAK); | |
4647 | } | |
4648 | BRDDISABLE(portp->brdnr); | |
4649 | restore_flags(flags); | |
4650 | } | |
4651 | ||
4652 | /*****************************************************************************/ | |
4653 | ||
4654 | /* | |
4655 | * Take flow control actions... | |
4656 | */ | |
4657 | ||
4658 | static void stl_sc26198flowctrl(stlport_t *portp, int state) | |
4659 | { | |
4660 | struct tty_struct *tty; | |
4661 | unsigned long flags; | |
4662 | unsigned char mr0; | |
4663 | ||
4664 | #ifdef DEBUG | |
4665 | printk("stl_sc26198flowctrl(portp=%x,state=%x)\n", (int) portp, state); | |
4666 | #endif | |
4667 | ||
4668 | if (portp == (stlport_t *) NULL) | |
4669 | return; | |
4670 | tty = portp->tty; | |
4671 | if (tty == (struct tty_struct *) NULL) | |
4672 | return; | |
4673 | ||
4674 | save_flags(flags); | |
4675 | cli(); | |
4676 | BRDENABLE(portp->brdnr, portp->pagenr); | |
4677 | ||
4678 | if (state) { | |
4679 | if (tty->termios->c_iflag & IXOFF) { | |
4680 | mr0 = stl_sc26198getreg(portp, MR0); | |
4681 | stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX)); | |
4682 | stl_sc26198setreg(portp, SCCR, CR_TXSENDXON); | |
4683 | mr0 |= MR0_SWFRX; | |
4684 | portp->stats.rxxon++; | |
4685 | stl_sc26198wait(portp); | |
4686 | stl_sc26198setreg(portp, MR0, mr0); | |
4687 | } | |
4688 | /* | |
4689 | * Question: should we return RTS to what it was before? It may | |
4690 | * have been set by an ioctl... Suppose not, since if you have | |
4691 | * hardware flow control set then it is pretty silly to go and | |
4692 | * set the RTS line by hand. | |
4693 | */ | |
4694 | if (tty->termios->c_cflag & CRTSCTS) { | |
4695 | stl_sc26198setreg(portp, MR1, | |
4696 | (stl_sc26198getreg(portp, MR1) | MR1_AUTORTS)); | |
4697 | stl_sc26198setreg(portp, IOPIOR, | |
4698 | (stl_sc26198getreg(portp, IOPIOR) | IOPR_RTS)); | |
4699 | portp->stats.rxrtson++; | |
4700 | } | |
4701 | } else { | |
4702 | if (tty->termios->c_iflag & IXOFF) { | |
4703 | mr0 = stl_sc26198getreg(portp, MR0); | |
4704 | stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX)); | |
4705 | stl_sc26198setreg(portp, SCCR, CR_TXSENDXOFF); | |
4706 | mr0 &= ~MR0_SWFRX; | |
4707 | portp->stats.rxxoff++; | |
4708 | stl_sc26198wait(portp); | |
4709 | stl_sc26198setreg(portp, MR0, mr0); | |
4710 | } | |
4711 | if (tty->termios->c_cflag & CRTSCTS) { | |
4712 | stl_sc26198setreg(portp, MR1, | |
4713 | (stl_sc26198getreg(portp, MR1) & ~MR1_AUTORTS)); | |
4714 | stl_sc26198setreg(portp, IOPIOR, | |
4715 | (stl_sc26198getreg(portp, IOPIOR) & ~IOPR_RTS)); | |
4716 | portp->stats.rxrtsoff++; | |
4717 | } | |
4718 | } | |
4719 | ||
4720 | BRDDISABLE(portp->brdnr); | |
4721 | restore_flags(flags); | |
4722 | } | |
4723 | ||
4724 | /*****************************************************************************/ | |
4725 | ||
4726 | /* | |
4727 | * Send a flow control character. | |
4728 | */ | |
4729 | ||
4730 | static void stl_sc26198sendflow(stlport_t *portp, int state) | |
4731 | { | |
4732 | struct tty_struct *tty; | |
4733 | unsigned long flags; | |
4734 | unsigned char mr0; | |
4735 | ||
4736 | #ifdef DEBUG | |
4737 | printk("stl_sc26198sendflow(portp=%x,state=%x)\n", (int) portp, state); | |
4738 | #endif | |
4739 | ||
4740 | if (portp == (stlport_t *) NULL) | |
4741 | return; | |
4742 | tty = portp->tty; | |
4743 | if (tty == (struct tty_struct *) NULL) | |
4744 | return; | |
4745 | ||
4746 | save_flags(flags); | |
4747 | cli(); | |
4748 | BRDENABLE(portp->brdnr, portp->pagenr); | |
4749 | if (state) { | |
4750 | mr0 = stl_sc26198getreg(portp, MR0); | |
4751 | stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX)); | |
4752 | stl_sc26198setreg(portp, SCCR, CR_TXSENDXON); | |
4753 | mr0 |= MR0_SWFRX; | |
4754 | portp->stats.rxxon++; | |
4755 | stl_sc26198wait(portp); | |
4756 | stl_sc26198setreg(portp, MR0, mr0); | |
4757 | } else { | |
4758 | mr0 = stl_sc26198getreg(portp, MR0); | |
4759 | stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX)); | |
4760 | stl_sc26198setreg(portp, SCCR, CR_TXSENDXOFF); | |
4761 | mr0 &= ~MR0_SWFRX; | |
4762 | portp->stats.rxxoff++; | |
4763 | stl_sc26198wait(portp); | |
4764 | stl_sc26198setreg(portp, MR0, mr0); | |
4765 | } | |
4766 | BRDDISABLE(portp->brdnr); | |
4767 | restore_flags(flags); | |
4768 | } | |
4769 | ||
4770 | /*****************************************************************************/ | |
4771 | ||
4772 | static void stl_sc26198flush(stlport_t *portp) | |
4773 | { | |
4774 | unsigned long flags; | |
4775 | ||
4776 | #ifdef DEBUG | |
4777 | printk("stl_sc26198flush(portp=%x)\n", (int) portp); | |
4778 | #endif | |
4779 | ||
4780 | if (portp == (stlport_t *) NULL) | |
4781 | return; | |
4782 | ||
4783 | save_flags(flags); | |
4784 | cli(); | |
4785 | BRDENABLE(portp->brdnr, portp->pagenr); | |
4786 | stl_sc26198setreg(portp, SCCR, CR_TXRESET); | |
4787 | stl_sc26198setreg(portp, SCCR, portp->crenable); | |
4788 | BRDDISABLE(portp->brdnr); | |
4789 | portp->tx.tail = portp->tx.head; | |
4790 | restore_flags(flags); | |
4791 | } | |
4792 | ||
4793 | /*****************************************************************************/ | |
4794 | ||
4795 | /* | |
4796 | * Return the current state of data flow on this port. This is only | |
4797 | * really interresting when determining if data has fully completed | |
4798 | * transmission or not... The sc26198 interrupt scheme cannot | |
4799 | * determine when all data has actually drained, so we need to | |
4800 | * check the port statusy register to be sure. | |
4801 | */ | |
4802 | ||
4803 | static int stl_sc26198datastate(stlport_t *portp) | |
4804 | { | |
4805 | unsigned long flags; | |
4806 | unsigned char sr; | |
4807 | ||
4808 | #ifdef DEBUG | |
4809 | printk("stl_sc26198datastate(portp=%x)\n", (int) portp); | |
4810 | #endif | |
4811 | ||
4812 | if (portp == (stlport_t *) NULL) | |
014c2544 | 4813 | return 0; |
1da177e4 | 4814 | if (test_bit(ASYI_TXBUSY, &portp->istate)) |
014c2544 | 4815 | return 1; |
1da177e4 LT |
4816 | |
4817 | save_flags(flags); | |
4818 | cli(); | |
4819 | BRDENABLE(portp->brdnr, portp->pagenr); | |
4820 | sr = stl_sc26198getreg(portp, SR); | |
4821 | BRDDISABLE(portp->brdnr); | |
4822 | restore_flags(flags); | |
4823 | ||
014c2544 | 4824 | return (sr & SR_TXEMPTY) ? 0 : 1; |
1da177e4 LT |
4825 | } |
4826 | ||
4827 | /*****************************************************************************/ | |
4828 | ||
4829 | /* | |
4830 | * Delay for a small amount of time, to give the sc26198 a chance | |
4831 | * to process a command... | |
4832 | */ | |
4833 | ||
4834 | static void stl_sc26198wait(stlport_t *portp) | |
4835 | { | |
4836 | int i; | |
4837 | ||
4838 | #ifdef DEBUG | |
4839 | printk("stl_sc26198wait(portp=%x)\n", (int) portp); | |
4840 | #endif | |
4841 | ||
4842 | if (portp == (stlport_t *) NULL) | |
4843 | return; | |
4844 | ||
4845 | for (i = 0; (i < 20); i++) | |
4846 | stl_sc26198getglobreg(portp, TSTR); | |
4847 | } | |
4848 | ||
4849 | /*****************************************************************************/ | |
4850 | ||
4851 | /* | |
4852 | * If we are TX flow controlled and in IXANY mode then we may | |
4853 | * need to unflow control here. We gotta do this because of the | |
4854 | * automatic flow control modes of the sc26198. | |
4855 | */ | |
4856 | ||
4857 | static inline void stl_sc26198txunflow(stlport_t *portp, struct tty_struct *tty) | |
4858 | { | |
4859 | unsigned char mr0; | |
4860 | ||
4861 | mr0 = stl_sc26198getreg(portp, MR0); | |
4862 | stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX)); | |
4863 | stl_sc26198setreg(portp, SCCR, CR_HOSTXON); | |
4864 | stl_sc26198wait(portp); | |
4865 | stl_sc26198setreg(portp, MR0, mr0); | |
4866 | clear_bit(ASYI_TXFLOWED, &portp->istate); | |
4867 | } | |
4868 | ||
4869 | /*****************************************************************************/ | |
4870 | ||
4871 | /* | |
4872 | * Interrupt service routine for sc26198 panels. | |
4873 | */ | |
4874 | ||
4875 | static void stl_sc26198intr(stlpanel_t *panelp, unsigned int iobase) | |
4876 | { | |
4877 | stlport_t *portp; | |
4878 | unsigned int iack; | |
4879 | ||
4880 | /* | |
4881 | * Work around bug in sc26198 chip... Cannot have A6 address | |
4882 | * line of UART high, else iack will be returned as 0. | |
4883 | */ | |
4884 | outb(0, (iobase + 1)); | |
4885 | ||
4886 | iack = inb(iobase + XP_IACK); | |
4887 | portp = panelp->ports[(iack & IVR_CHANMASK) + ((iobase & 0x4) << 1)]; | |
4888 | ||
4889 | if (iack & IVR_RXDATA) | |
4890 | stl_sc26198rxisr(portp, iack); | |
4891 | else if (iack & IVR_TXDATA) | |
4892 | stl_sc26198txisr(portp); | |
4893 | else | |
4894 | stl_sc26198otherisr(portp, iack); | |
4895 | } | |
4896 | ||
4897 | /*****************************************************************************/ | |
4898 | ||
4899 | /* | |
4900 | * Transmit interrupt handler. This has gotta be fast! Handling TX | |
4901 | * chars is pretty simple, stuff as many as possible from the TX buffer | |
4902 | * into the sc26198 FIFO. | |
4903 | * In practice it is possible that interrupts are enabled but that the | |
4904 | * port has been hung up. Need to handle not having any TX buffer here, | |
4905 | * this is done by using the side effect that head and tail will also | |
4906 | * be NULL if the buffer has been freed. | |
4907 | */ | |
4908 | ||
4909 | static void stl_sc26198txisr(stlport_t *portp) | |
4910 | { | |
4911 | unsigned int ioaddr; | |
4912 | unsigned char mr0; | |
4913 | int len, stlen; | |
4914 | char *head, *tail; | |
4915 | ||
4916 | #ifdef DEBUG | |
4917 | printk("stl_sc26198txisr(portp=%x)\n", (int) portp); | |
4918 | #endif | |
4919 | ||
4920 | ioaddr = portp->ioaddr; | |
4921 | head = portp->tx.head; | |
4922 | tail = portp->tx.tail; | |
4923 | len = (head >= tail) ? (head - tail) : (STL_TXBUFSIZE - (tail - head)); | |
4924 | if ((len == 0) || ((len < STL_TXBUFLOW) && | |
4925 | (test_bit(ASYI_TXLOW, &portp->istate) == 0))) { | |
4926 | set_bit(ASYI_TXLOW, &portp->istate); | |
4927 | schedule_work(&portp->tqueue); | |
4928 | } | |
4929 | ||
4930 | if (len == 0) { | |
4931 | outb((MR0 | portp->uartaddr), (ioaddr + XP_ADDR)); | |
4932 | mr0 = inb(ioaddr + XP_DATA); | |
4933 | if ((mr0 & MR0_TXMASK) == MR0_TXEMPTY) { | |
4934 | portp->imr &= ~IR_TXRDY; | |
4935 | outb((IMR | portp->uartaddr), (ioaddr + XP_ADDR)); | |
4936 | outb(portp->imr, (ioaddr + XP_DATA)); | |
4937 | clear_bit(ASYI_TXBUSY, &portp->istate); | |
4938 | } else { | |
4939 | mr0 |= ((mr0 & ~MR0_TXMASK) | MR0_TXEMPTY); | |
4940 | outb(mr0, (ioaddr + XP_DATA)); | |
4941 | } | |
4942 | } else { | |
4943 | len = MIN(len, SC26198_TXFIFOSIZE); | |
4944 | portp->stats.txtotal += len; | |
4945 | stlen = MIN(len, ((portp->tx.buf + STL_TXBUFSIZE) - tail)); | |
4946 | outb(GTXFIFO, (ioaddr + XP_ADDR)); | |
4947 | outsb((ioaddr + XP_DATA), tail, stlen); | |
4948 | len -= stlen; | |
4949 | tail += stlen; | |
4950 | if (tail >= (portp->tx.buf + STL_TXBUFSIZE)) | |
4951 | tail = portp->tx.buf; | |
4952 | if (len > 0) { | |
4953 | outsb((ioaddr + XP_DATA), tail, len); | |
4954 | tail += len; | |
4955 | } | |
4956 | portp->tx.tail = tail; | |
4957 | } | |
4958 | } | |
4959 | ||
4960 | /*****************************************************************************/ | |
4961 | ||
4962 | /* | |
4963 | * Receive character interrupt handler. Determine if we have good chars | |
4964 | * or bad chars and then process appropriately. Good chars are easy | |
4965 | * just shove the lot into the RX buffer and set all status byte to 0. | |
4966 | * If a bad RX char then process as required. This routine needs to be | |
4967 | * fast! In practice it is possible that we get an interrupt on a port | |
4968 | * that is closed. This can happen on hangups - since they completely | |
4969 | * shutdown a port not in user context. Need to handle this case. | |
4970 | */ | |
4971 | ||
4972 | static void stl_sc26198rxisr(stlport_t *portp, unsigned int iack) | |
4973 | { | |
4974 | struct tty_struct *tty; | |
4975 | unsigned int len, buflen, ioaddr; | |
4976 | ||
4977 | #ifdef DEBUG | |
4978 | printk("stl_sc26198rxisr(portp=%x,iack=%x)\n", (int) portp, iack); | |
4979 | #endif | |
4980 | ||
4981 | tty = portp->tty; | |
4982 | ioaddr = portp->ioaddr; | |
4983 | outb(GIBCR, (ioaddr + XP_ADDR)); | |
4984 | len = inb(ioaddr + XP_DATA) + 1; | |
4985 | ||
4986 | if ((iack & IVR_TYPEMASK) == IVR_RXDATA) { | |
33f0f88f | 4987 | if (tty == NULL || (buflen = tty_buffer_request_room(tty, len)) == 0) { |
1da177e4 LT |
4988 | len = MIN(len, sizeof(stl_unwanted)); |
4989 | outb(GRXFIFO, (ioaddr + XP_ADDR)); | |
4990 | insb((ioaddr + XP_DATA), &stl_unwanted[0], len); | |
4991 | portp->stats.rxlost += len; | |
4992 | portp->stats.rxtotal += len; | |
4993 | } else { | |
4994 | len = MIN(len, buflen); | |
4995 | if (len > 0) { | |
33f0f88f | 4996 | unsigned char *ptr; |
1da177e4 | 4997 | outb(GRXFIFO, (ioaddr + XP_ADDR)); |
33f0f88f AC |
4998 | tty_prepare_flip_string(tty, &ptr, len); |
4999 | insb((ioaddr + XP_DATA), ptr, len); | |
1da177e4 LT |
5000 | tty_schedule_flip(tty); |
5001 | portp->stats.rxtotal += len; | |
5002 | } | |
5003 | } | |
5004 | } else { | |
5005 | stl_sc26198rxbadchars(portp); | |
5006 | } | |
5007 | ||
5008 | /* | |
5009 | * If we are TX flow controlled and in IXANY mode then we may need | |
5010 | * to unflow control here. We gotta do this because of the automatic | |
5011 | * flow control modes of the sc26198. | |
5012 | */ | |
5013 | if (test_bit(ASYI_TXFLOWED, &portp->istate)) { | |
5014 | if ((tty != (struct tty_struct *) NULL) && | |
5015 | (tty->termios != (struct termios *) NULL) && | |
5016 | (tty->termios->c_iflag & IXANY)) { | |
5017 | stl_sc26198txunflow(portp, tty); | |
5018 | } | |
5019 | } | |
5020 | } | |
5021 | ||
5022 | /*****************************************************************************/ | |
5023 | ||
5024 | /* | |
5025 | * Process an RX bad character. | |
5026 | */ | |
5027 | ||
5028 | static inline void stl_sc26198rxbadch(stlport_t *portp, unsigned char status, char ch) | |
5029 | { | |
5030 | struct tty_struct *tty; | |
5031 | unsigned int ioaddr; | |
5032 | ||
5033 | tty = portp->tty; | |
5034 | ioaddr = portp->ioaddr; | |
5035 | ||
5036 | if (status & SR_RXPARITY) | |
5037 | portp->stats.rxparity++; | |
5038 | if (status & SR_RXFRAMING) | |
5039 | portp->stats.rxframing++; | |
5040 | if (status & SR_RXOVERRUN) | |
5041 | portp->stats.rxoverrun++; | |
5042 | if (status & SR_RXBREAK) | |
5043 | portp->stats.rxbreaks++; | |
5044 | ||
5045 | if ((tty != (struct tty_struct *) NULL) && | |
5046 | ((portp->rxignoremsk & status) == 0)) { | |
5047 | if (portp->rxmarkmsk & status) { | |
5048 | if (status & SR_RXBREAK) { | |
5049 | status = TTY_BREAK; | |
5050 | if (portp->flags & ASYNC_SAK) { | |
5051 | do_SAK(tty); | |
5052 | BRDENABLE(portp->brdnr, portp->pagenr); | |
5053 | } | |
5054 | } else if (status & SR_RXPARITY) { | |
5055 | status = TTY_PARITY; | |
5056 | } else if (status & SR_RXFRAMING) { | |
5057 | status = TTY_FRAME; | |
5058 | } else if(status & SR_RXOVERRUN) { | |
5059 | status = TTY_OVERRUN; | |
5060 | } else { | |
5061 | status = 0; | |
5062 | } | |
5063 | } else { | |
5064 | status = 0; | |
5065 | } | |
5066 | ||
33f0f88f AC |
5067 | tty_insert_flip_char(tty, ch, status); |
5068 | tty_schedule_flip(tty); | |
1da177e4 LT |
5069 | |
5070 | if (status == 0) | |
5071 | portp->stats.rxtotal++; | |
5072 | } | |
5073 | } | |
5074 | ||
5075 | /*****************************************************************************/ | |
5076 | ||
5077 | /* | |
5078 | * Process all characters in the RX FIFO of the UART. Check all char | |
5079 | * status bytes as well, and process as required. We need to check | |
5080 | * all bytes in the FIFO, in case some more enter the FIFO while we | |
5081 | * are here. To get the exact character error type we need to switch | |
5082 | * into CHAR error mode (that is why we need to make sure we empty | |
5083 | * the FIFO). | |
5084 | */ | |
5085 | ||
5086 | static void stl_sc26198rxbadchars(stlport_t *portp) | |
5087 | { | |
5088 | unsigned char status, mr1; | |
5089 | char ch; | |
5090 | ||
5091 | /* | |
5092 | * To get the precise error type for each character we must switch | |
5093 | * back into CHAR error mode. | |
5094 | */ | |
5095 | mr1 = stl_sc26198getreg(portp, MR1); | |
5096 | stl_sc26198setreg(portp, MR1, (mr1 & ~MR1_ERRBLOCK)); | |
5097 | ||
5098 | while ((status = stl_sc26198getreg(portp, SR)) & SR_RXRDY) { | |
5099 | stl_sc26198setreg(portp, SCCR, CR_CLEARRXERR); | |
5100 | ch = stl_sc26198getreg(portp, RXFIFO); | |
5101 | stl_sc26198rxbadch(portp, status, ch); | |
5102 | } | |
5103 | ||
5104 | /* | |
5105 | * To get correct interrupt class we must switch back into BLOCK | |
5106 | * error mode. | |
5107 | */ | |
5108 | stl_sc26198setreg(portp, MR1, mr1); | |
5109 | } | |
5110 | ||
5111 | /*****************************************************************************/ | |
5112 | ||
5113 | /* | |
5114 | * Other interrupt handler. This includes modem signals, flow | |
5115 | * control actions, etc. Most stuff is left to off-level interrupt | |
5116 | * processing time. | |
5117 | */ | |
5118 | ||
5119 | static void stl_sc26198otherisr(stlport_t *portp, unsigned int iack) | |
5120 | { | |
5121 | unsigned char cir, ipr, xisr; | |
5122 | ||
5123 | #ifdef DEBUG | |
5124 | printk("stl_sc26198otherisr(portp=%x,iack=%x)\n", (int) portp, iack); | |
5125 | #endif | |
5126 | ||
5127 | cir = stl_sc26198getglobreg(portp, CIR); | |
5128 | ||
5129 | switch (cir & CIR_SUBTYPEMASK) { | |
5130 | case CIR_SUBCOS: | |
5131 | ipr = stl_sc26198getreg(portp, IPR); | |
5132 | if (ipr & IPR_DCDCHANGE) { | |
5133 | set_bit(ASYI_DCDCHANGE, &portp->istate); | |
5134 | schedule_work(&portp->tqueue); | |
5135 | portp->stats.modem++; | |
5136 | } | |
5137 | break; | |
5138 | case CIR_SUBXONXOFF: | |
5139 | xisr = stl_sc26198getreg(portp, XISR); | |
5140 | if (xisr & XISR_RXXONGOT) { | |
5141 | set_bit(ASYI_TXFLOWED, &portp->istate); | |
5142 | portp->stats.txxoff++; | |
5143 | } | |
5144 | if (xisr & XISR_RXXOFFGOT) { | |
5145 | clear_bit(ASYI_TXFLOWED, &portp->istate); | |
5146 | portp->stats.txxon++; | |
5147 | } | |
5148 | break; | |
5149 | case CIR_SUBBREAK: | |
5150 | stl_sc26198setreg(portp, SCCR, CR_BREAKRESET); | |
5151 | stl_sc26198rxbadchars(portp); | |
5152 | break; | |
5153 | default: | |
5154 | break; | |
5155 | } | |
5156 | } | |
5157 | ||
5158 | /*****************************************************************************/ |