]>
Commit | Line | Data |
---|---|---|
d2912cb1 | 1 | // SPDX-License-Identifier: GPL-2.0-only |
14cf11af | 2 | /* |
14cf11af PM |
3 | * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> |
4 | * Copyright (C) 2004 John Steele Scott <toojays@toojays.net> | |
5 | * | |
14cf11af PM |
6 | * TODO: Need a big cleanup here. Basically, we need to have different |
7 | * cpufreq_driver structures for the different type of HW instead of the | |
8 | * current mess. We also need to better deal with the detection of the | |
9 | * type of machine. | |
14cf11af PM |
10 | */ |
11 | ||
1c5864e2 JP |
12 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
13 | ||
14cf11af PM |
14 | #include <linux/module.h> |
15 | #include <linux/types.h> | |
16 | #include <linux/errno.h> | |
17 | #include <linux/kernel.h> | |
18 | #include <linux/delay.h> | |
19 | #include <linux/sched.h> | |
20 | #include <linux/adb.h> | |
21 | #include <linux/pmu.h> | |
14cf11af PM |
22 | #include <linux/cpufreq.h> |
23 | #include <linux/init.h> | |
edbaa603 | 24 | #include <linux/device.h> |
14cf11af | 25 | #include <linux/hardirq.h> |
1037b275 | 26 | #include <linux/of_device.h> |
14cf11af PM |
27 | #include <asm/prom.h> |
28 | #include <asm/machdep.h> | |
29 | #include <asm/irq.h> | |
30 | #include <asm/pmac_feature.h> | |
31 | #include <asm/mmu_context.h> | |
32 | #include <asm/sections.h> | |
33 | #include <asm/cputable.h> | |
34 | #include <asm/time.h> | |
14cf11af PM |
35 | #include <asm/mpic.h> |
36 | #include <asm/keylargo.h> | |
ae3a197e | 37 | #include <asm/switch_to.h> |
14cf11af PM |
38 | |
39 | /* WARNING !!! This will cause calibrate_delay() to be called, | |
40 | * but this is an __init function ! So you MUST go edit | |
41 | * init/main.c to make it non-init before enabling DEBUG_FREQ | |
42 | */ | |
43 | #undef DEBUG_FREQ | |
44 | ||
14cf11af PM |
45 | extern void low_choose_7447a_dfs(int dfs); |
46 | extern void low_choose_750fx_pll(int pll); | |
47 | extern void low_sleep_handler(void); | |
48 | ||
49 | /* | |
50 | * Currently, PowerMac cpufreq supports only high & low frequencies | |
51 | * that are set by the firmware | |
52 | */ | |
53 | static unsigned int low_freq; | |
54 | static unsigned int hi_freq; | |
55 | static unsigned int cur_freq; | |
56 | static unsigned int sleep_freq; | |
bb29b719 | 57 | static unsigned long transition_latency; |
14cf11af PM |
58 | |
59 | /* | |
b3c2ffd5 | 60 | * Different models uses different mechanisms to switch the frequency |
14cf11af PM |
61 | */ |
62 | static int (*set_speed_proc)(int low_speed); | |
63 | static unsigned int (*get_speed_proc)(void); | |
64 | ||
65 | /* | |
66 | * Some definitions used by the various speedprocs | |
67 | */ | |
68 | static u32 voltage_gpio; | |
69 | static u32 frequency_gpio; | |
70 | static u32 slew_done_gpio; | |
71 | static int no_schedule; | |
72 | static int has_cpu_l2lve; | |
73 | static int is_pmu_based; | |
74 | ||
75 | /* There are only two frequency states for each processor. Values | |
76 | * are in kHz for the time being. | |
77 | */ | |
78 | #define CPUFREQ_HIGH 0 | |
79 | #define CPUFREQ_LOW 1 | |
80 | ||
81 | static struct cpufreq_frequency_table pmac_cpu_freqs[] = { | |
7f4b0461 VK |
82 | {0, CPUFREQ_HIGH, 0}, |
83 | {0, CPUFREQ_LOW, 0}, | |
84 | {0, 0, CPUFREQ_TABLE_END}, | |
14cf11af PM |
85 | }; |
86 | ||
14cf11af PM |
87 | static inline void local_delay(unsigned long ms) |
88 | { | |
89 | if (no_schedule) | |
90 | mdelay(ms); | |
91 | else | |
92 | msleep(ms); | |
93 | } | |
94 | ||
14cf11af PM |
95 | #ifdef DEBUG_FREQ |
96 | static inline void debug_calc_bogomips(void) | |
97 | { | |
98 | /* This will cause a recalc of bogomips and display the | |
99 | * result. We backup/restore the value to avoid affecting the | |
100 | * core cpufreq framework's own calculation. | |
101 | */ | |
14cf11af PM |
102 | unsigned long save_lpj = loops_per_jiffy; |
103 | calibrate_delay(); | |
104 | loops_per_jiffy = save_lpj; | |
105 | } | |
106 | #endif /* DEBUG_FREQ */ | |
107 | ||
108 | /* Switch CPU speed under 750FX CPU control | |
109 | */ | |
110 | static int cpu_750fx_cpu_speed(int low_speed) | |
111 | { | |
112 | u32 hid2; | |
113 | ||
114 | if (low_speed == 0) { | |
115 | /* ramping up, set voltage first */ | |
116 | pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); | |
117 | /* Make sure we sleep for at least 1ms */ | |
118 | local_delay(10); | |
119 | ||
120 | /* tweak L2 for high voltage */ | |
121 | if (has_cpu_l2lve) { | |
122 | hid2 = mfspr(SPRN_HID2); | |
123 | hid2 &= ~0x2000; | |
124 | mtspr(SPRN_HID2, hid2); | |
125 | } | |
126 | } | |
f99e33f1 | 127 | #ifdef CONFIG_PPC_BOOK3S_32 |
14cf11af PM |
128 | low_choose_750fx_pll(low_speed); |
129 | #endif | |
130 | if (low_speed == 1) { | |
131 | /* tweak L2 for low voltage */ | |
132 | if (has_cpu_l2lve) { | |
133 | hid2 = mfspr(SPRN_HID2); | |
134 | hid2 |= 0x2000; | |
135 | mtspr(SPRN_HID2, hid2); | |
136 | } | |
137 | ||
138 | /* ramping down, set voltage last */ | |
139 | pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); | |
140 | local_delay(10); | |
141 | } | |
142 | ||
143 | return 0; | |
144 | } | |
145 | ||
146 | static unsigned int cpu_750fx_get_cpu_speed(void) | |
147 | { | |
148 | if (mfspr(SPRN_HID1) & HID1_PS) | |
149 | return low_freq; | |
150 | else | |
151 | return hi_freq; | |
152 | } | |
153 | ||
154 | /* Switch CPU speed using DFS */ | |
155 | static int dfs_set_cpu_speed(int low_speed) | |
156 | { | |
157 | if (low_speed == 0) { | |
158 | /* ramping up, set voltage first */ | |
159 | pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); | |
160 | /* Make sure we sleep for at least 1ms */ | |
161 | local_delay(1); | |
162 | } | |
163 | ||
164 | /* set frequency */ | |
f99e33f1 | 165 | #ifdef CONFIG_PPC_BOOK3S_32 |
14cf11af PM |
166 | low_choose_7447a_dfs(low_speed); |
167 | #endif | |
168 | udelay(100); | |
169 | ||
170 | if (low_speed == 1) { | |
171 | /* ramping down, set voltage last */ | |
172 | pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); | |
173 | local_delay(1); | |
174 | } | |
175 | ||
176 | return 0; | |
177 | } | |
178 | ||
179 | static unsigned int dfs_get_cpu_speed(void) | |
180 | { | |
181 | if (mfspr(SPRN_HID1) & HID1_DFS) | |
182 | return low_freq; | |
183 | else | |
184 | return hi_freq; | |
185 | } | |
186 | ||
187 | ||
188 | /* Switch CPU speed using slewing GPIOs | |
189 | */ | |
190 | static int gpios_set_cpu_speed(int low_speed) | |
191 | { | |
192 | int gpio, timeout = 0; | |
193 | ||
194 | /* If ramping up, set voltage first */ | |
195 | if (low_speed == 0) { | |
196 | pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); | |
197 | /* Delay is way too big but it's ok, we schedule */ | |
198 | local_delay(10); | |
199 | } | |
200 | ||
201 | /* Set frequency */ | |
202 | gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); | |
203 | if (low_speed == ((gpio & 0x01) == 0)) | |
204 | goto skip; | |
205 | ||
206 | pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio, | |
207 | low_speed ? 0x04 : 0x05); | |
208 | udelay(200); | |
209 | do { | |
210 | if (++timeout > 100) | |
211 | break; | |
212 | local_delay(1); | |
213 | gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0); | |
214 | } while((gpio & 0x02) == 0); | |
215 | skip: | |
216 | /* If ramping down, set voltage last */ | |
217 | if (low_speed == 1) { | |
218 | pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); | |
219 | /* Delay is way too big but it's ok, we schedule */ | |
220 | local_delay(10); | |
221 | } | |
222 | ||
223 | #ifdef DEBUG_FREQ | |
224 | debug_calc_bogomips(); | |
225 | #endif | |
226 | ||
227 | return 0; | |
228 | } | |
229 | ||
230 | /* Switch CPU speed under PMU control | |
231 | */ | |
232 | static int pmu_set_cpu_speed(int low_speed) | |
233 | { | |
234 | struct adb_request req; | |
235 | unsigned long save_l2cr; | |
236 | unsigned long save_l3cr; | |
237 | unsigned int pic_prio; | |
238 | unsigned long flags; | |
239 | ||
240 | preempt_disable(); | |
241 | ||
242 | #ifdef DEBUG_FREQ | |
243 | printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1)); | |
244 | #endif | |
245 | pmu_suspend(); | |
246 | ||
247 | /* Disable all interrupt sources on openpic */ | |
248 | pic_prio = mpic_cpu_get_priority(); | |
249 | mpic_cpu_set_priority(0xf); | |
250 | ||
251 | /* Make sure the decrementer won't interrupt us */ | |
252 | asm volatile("mtdec %0" : : "r" (0x7fffffff)); | |
80f7228b | 253 | /* Make sure any pending DEC interrupt occurring while we did |
14cf11af PM |
254 | * the above didn't re-enable the DEC */ |
255 | mb(); | |
256 | asm volatile("mtdec %0" : : "r" (0x7fffffff)); | |
257 | ||
258 | /* We can now disable MSR_EE */ | |
259 | local_irq_save(flags); | |
260 | ||
261 | /* Giveup the FPU & vec */ | |
262 | enable_kernel_fp(); | |
263 | ||
264 | #ifdef CONFIG_ALTIVEC | |
265 | if (cpu_has_feature(CPU_FTR_ALTIVEC)) | |
266 | enable_kernel_altivec(); | |
267 | #endif /* CONFIG_ALTIVEC */ | |
268 | ||
269 | /* Save & disable L2 and L3 caches */ | |
270 | save_l3cr = _get_L3CR(); /* (returns -1 if not available) */ | |
271 | save_l2cr = _get_L2CR(); /* (returns -1 if not available) */ | |
272 | ||
273 | /* Send the new speed command. My assumption is that this command | |
274 | * will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep | |
275 | */ | |
276 | pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed); | |
277 | while (!req.complete) | |
278 | pmu_poll(); | |
279 | ||
280 | /* Prepare the northbridge for the speed transition */ | |
281 | pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1); | |
282 | ||
283 | /* Call low level code to backup CPU state and recover from | |
284 | * hardware reset | |
285 | */ | |
286 | low_sleep_handler(); | |
287 | ||
288 | /* Restore the northbridge */ | |
289 | pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0); | |
290 | ||
291 | /* Restore L2 cache */ | |
292 | if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0) | |
293 | _set_L2CR(save_l2cr); | |
294 | /* Restore L3 cache */ | |
295 | if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0) | |
296 | _set_L3CR(save_l3cr); | |
297 | ||
298 | /* Restore userland MMU context */ | |
d2adba3f | 299 | switch_mmu_context(NULL, current->active_mm, NULL); |
14cf11af PM |
300 | |
301 | #ifdef DEBUG_FREQ | |
302 | printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1)); | |
303 | #endif | |
304 | ||
305 | /* Restore low level PMU operations */ | |
306 | pmu_unlock(); | |
307 | ||
c1aa687d PM |
308 | /* |
309 | * Restore decrementer; we'll take a decrementer interrupt | |
310 | * as soon as interrupts are re-enabled and the generic | |
311 | * clockevents code will reprogram it with the right value. | |
312 | */ | |
313 | set_dec(1); | |
14cf11af PM |
314 | |
315 | /* Restore interrupts */ | |
316 | mpic_cpu_set_priority(pic_prio); | |
317 | ||
318 | /* Let interrupts flow again ... */ | |
319 | local_irq_restore(flags); | |
320 | ||
321 | #ifdef DEBUG_FREQ | |
322 | debug_calc_bogomips(); | |
323 | #endif | |
324 | ||
325 | pmu_resume(); | |
326 | ||
327 | preempt_enable(); | |
328 | ||
329 | return 0; | |
330 | } | |
331 | ||
d4019f0a | 332 | static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode) |
14cf11af | 333 | { |
14cf11af PM |
334 | unsigned long l3cr; |
335 | static unsigned long prev_l3cr; | |
336 | ||
14cf11af PM |
337 | if (speed_mode == CPUFREQ_LOW && |
338 | cpu_has_feature(CPU_FTR_L3CR)) { | |
339 | l3cr = _get_L3CR(); | |
340 | if (l3cr & L3CR_L3E) { | |
341 | prev_l3cr = l3cr; | |
342 | _set_L3CR(0); | |
343 | } | |
344 | } | |
345 | set_speed_proc(speed_mode == CPUFREQ_LOW); | |
346 | if (speed_mode == CPUFREQ_HIGH && | |
347 | cpu_has_feature(CPU_FTR_L3CR)) { | |
348 | l3cr = _get_L3CR(); | |
349 | if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr) | |
350 | _set_L3CR(prev_l3cr); | |
351 | } | |
14cf11af PM |
352 | cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; |
353 | ||
354 | return 0; | |
355 | } | |
356 | ||
357 | static unsigned int pmac_cpufreq_get_speed(unsigned int cpu) | |
358 | { | |
359 | return cur_freq; | |
360 | } | |
361 | ||
14cf11af | 362 | static int pmac_cpufreq_target( struct cpufreq_policy *policy, |
9c0ebcf7 | 363 | unsigned int index) |
14cf11af | 364 | { |
4350147a | 365 | int rc; |
14cf11af | 366 | |
d4019f0a | 367 | rc = do_set_cpu_speed(policy, index); |
14cf11af | 368 | |
4350147a BH |
369 | ppc_proc_freq = cur_freq * 1000ul; |
370 | return rc; | |
14cf11af PM |
371 | } |
372 | ||
373 | static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy) | |
374 | { | |
c4dcc8a1 VK |
375 | cpufreq_generic_init(policy, pmac_cpu_freqs, transition_latency); |
376 | return 0; | |
14cf11af PM |
377 | } |
378 | ||
379 | static u32 read_gpio(struct device_node *np) | |
380 | { | |
e2eb6392 | 381 | const u32 *reg = of_get_property(np, "reg", NULL); |
14cf11af PM |
382 | u32 offset; |
383 | ||
384 | if (reg == NULL) | |
385 | return 0; | |
386 | /* That works for all keylargos but shall be fixed properly | |
387 | * some day... The problem is that it seems we can't rely | |
388 | * on the "reg" property of the GPIO nodes, they are either | |
389 | * relative to the base of KeyLargo or to the base of the | |
390 | * GPIO space, and the device-tree doesn't help. | |
391 | */ | |
392 | offset = *reg; | |
393 | if (offset < KEYLARGO_GPIO_LEVELS0) | |
394 | offset += KEYLARGO_GPIO_LEVELS0; | |
395 | return offset; | |
396 | } | |
397 | ||
7ca64e2d | 398 | static int pmac_cpufreq_suspend(struct cpufreq_policy *policy) |
14cf11af PM |
399 | { |
400 | /* Ok, this could be made a bit smarter, but let's be robust for now. We | |
401 | * always force a speed change to high speed before sleep, to make sure | |
402 | * we have appropriate voltage and/or bus speed for the wakeup process, | |
403 | * and to make sure our loops_per_jiffies are "good enough", that is will | |
404 | * not cause too short delays if we sleep in low speed and wake in high | |
405 | * speed.. | |
406 | */ | |
407 | no_schedule = 1; | |
408 | sleep_freq = cur_freq; | |
409 | if (cur_freq == low_freq && !is_pmu_based) | |
d4019f0a | 410 | do_set_cpu_speed(policy, CPUFREQ_HIGH); |
14cf11af PM |
411 | return 0; |
412 | } | |
413 | ||
414 | static int pmac_cpufreq_resume(struct cpufreq_policy *policy) | |
415 | { | |
416 | /* If we resume, first check if we have a get() function */ | |
417 | if (get_speed_proc) | |
418 | cur_freq = get_speed_proc(); | |
22358ea8 | 419 | else |
14cf11af PM |
420 | cur_freq = 0; |
421 | ||
422 | /* We don't, hrm... we don't really know our speed here, best | |
423 | * is that we force a switch to whatever it was, which is | |
424 | * probably high speed due to our suspend() routine | |
425 | */ | |
b43a7ffb | 426 | do_set_cpu_speed(policy, sleep_freq == low_freq ? |
d4019f0a | 427 | CPUFREQ_LOW : CPUFREQ_HIGH); |
14cf11af | 428 | |
4350147a BH |
429 | ppc_proc_freq = cur_freq * 1000ul; |
430 | ||
14cf11af PM |
431 | no_schedule = 0; |
432 | return 0; | |
433 | } | |
434 | ||
435 | static struct cpufreq_driver pmac_cpufreq_driver = { | |
2633a46c | 436 | .verify = cpufreq_generic_frequency_table_verify, |
9c0ebcf7 | 437 | .target_index = pmac_cpufreq_target, |
14cf11af PM |
438 | .get = pmac_cpufreq_get_speed, |
439 | .init = pmac_cpufreq_cpu_init, | |
440 | .suspend = pmac_cpufreq_suspend, | |
441 | .resume = pmac_cpufreq_resume, | |
fe829ed8 VK |
442 | .flags = CPUFREQ_PM_NO_WARN | |
443 | CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING, | |
2633a46c | 444 | .attr = cpufreq_generic_attr, |
14cf11af | 445 | .name = "powermac", |
14cf11af PM |
446 | }; |
447 | ||
448 | ||
449 | static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) | |
450 | { | |
451 | struct device_node *volt_gpio_np = of_find_node_by_name(NULL, | |
452 | "voltage-gpio"); | |
453 | struct device_node *freq_gpio_np = of_find_node_by_name(NULL, | |
454 | "frequency-gpio"); | |
455 | struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL, | |
456 | "slewing-done"); | |
018a3d1d | 457 | const u32 *value; |
14cf11af PM |
458 | |
459 | /* | |
460 | * Check to see if it's GPIO driven or PMU only | |
461 | * | |
462 | * The way we extract the GPIO address is slightly hackish, but it | |
463 | * works well enough for now. We need to abstract the whole GPIO | |
464 | * stuff sooner or later anyway | |
465 | */ | |
466 | ||
467 | if (volt_gpio_np) | |
468 | voltage_gpio = read_gpio(volt_gpio_np); | |
469 | if (freq_gpio_np) | |
470 | frequency_gpio = read_gpio(freq_gpio_np); | |
471 | if (slew_done_gpio_np) | |
472 | slew_done_gpio = read_gpio(slew_done_gpio_np); | |
473 | ||
474 | /* If we use the frequency GPIOs, calculate the min/max speeds based | |
475 | * on the bus frequencies | |
476 | */ | |
477 | if (frequency_gpio && slew_done_gpio) { | |
478 | int lenp, rc; | |
018a3d1d | 479 | const u32 *freqs, *ratio; |
14cf11af | 480 | |
e2eb6392 | 481 | freqs = of_get_property(cpunode, "bus-frequencies", &lenp); |
14cf11af PM |
482 | lenp /= sizeof(u32); |
483 | if (freqs == NULL || lenp != 2) { | |
1c5864e2 | 484 | pr_err("bus-frequencies incorrect or missing\n"); |
14cf11af PM |
485 | return 1; |
486 | } | |
e2eb6392 SR |
487 | ratio = of_get_property(cpunode, "processor-to-bus-ratio*2", |
488 | NULL); | |
14cf11af | 489 | if (ratio == NULL) { |
1c5864e2 | 490 | pr_err("processor-to-bus-ratio*2 missing\n"); |
14cf11af PM |
491 | return 1; |
492 | } | |
493 | ||
494 | /* Get the min/max bus frequencies */ | |
495 | low_freq = min(freqs[0], freqs[1]); | |
496 | hi_freq = max(freqs[0], freqs[1]); | |
497 | ||
498 | /* Grrrr.. It _seems_ that the device-tree is lying on the low bus | |
499 | * frequency, it claims it to be around 84Mhz on some models while | |
500 | * it appears to be approx. 101Mhz on all. Let's hack around here... | |
501 | * fortunately, we don't need to be too precise | |
502 | */ | |
503 | if (low_freq < 98000000) | |
504 | low_freq = 101000000; | |
4350147a | 505 | |
14cf11af PM |
506 | /* Convert those to CPU core clocks */ |
507 | low_freq = (low_freq * (*ratio)) / 2000; | |
508 | hi_freq = (hi_freq * (*ratio)) / 2000; | |
509 | ||
510 | /* Now we get the frequencies, we read the GPIO to see what is out current | |
511 | * speed | |
512 | */ | |
513 | rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); | |
514 | cur_freq = (rc & 0x01) ? hi_freq : low_freq; | |
515 | ||
516 | set_speed_proc = gpios_set_cpu_speed; | |
517 | return 1; | |
518 | } | |
519 | ||
520 | /* If we use the PMU, look for the min & max frequencies in the | |
521 | * device-tree | |
522 | */ | |
e2eb6392 | 523 | value = of_get_property(cpunode, "min-clock-frequency", NULL); |
14cf11af PM |
524 | if (!value) |
525 | return 1; | |
526 | low_freq = (*value) / 1000; | |
527 | /* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree | |
528 | * here */ | |
529 | if (low_freq < 100000) | |
530 | low_freq *= 10; | |
531 | ||
e2eb6392 | 532 | value = of_get_property(cpunode, "max-clock-frequency", NULL); |
14cf11af PM |
533 | if (!value) |
534 | return 1; | |
535 | hi_freq = (*value) / 1000; | |
536 | set_speed_proc = pmu_set_cpu_speed; | |
537 | is_pmu_based = 1; | |
538 | ||
539 | return 0; | |
540 | } | |
541 | ||
542 | static int pmac_cpufreq_init_7447A(struct device_node *cpunode) | |
543 | { | |
544 | struct device_node *volt_gpio_np; | |
545 | ||
e2eb6392 | 546 | if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL) |
14cf11af PM |
547 | return 1; |
548 | ||
549 | volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); | |
550 | if (volt_gpio_np) | |
551 | voltage_gpio = read_gpio(volt_gpio_np); | |
8d10dc28 | 552 | of_node_put(volt_gpio_np); |
14cf11af | 553 | if (!voltage_gpio){ |
1c5864e2 | 554 | pr_err("missing cpu-vcore-select gpio\n"); |
14cf11af PM |
555 | return 1; |
556 | } | |
557 | ||
558 | /* OF only reports the high frequency */ | |
559 | hi_freq = cur_freq; | |
560 | low_freq = cur_freq/2; | |
561 | ||
562 | /* Read actual frequency from CPU */ | |
563 | cur_freq = dfs_get_cpu_speed(); | |
564 | set_speed_proc = dfs_set_cpu_speed; | |
565 | get_speed_proc = dfs_get_cpu_speed; | |
566 | ||
567 | return 0; | |
568 | } | |
569 | ||
570 | static int pmac_cpufreq_init_750FX(struct device_node *cpunode) | |
571 | { | |
572 | struct device_node *volt_gpio_np; | |
018a3d1d JK |
573 | u32 pvr; |
574 | const u32 *value; | |
14cf11af | 575 | |
e2eb6392 | 576 | if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL) |
14cf11af PM |
577 | return 1; |
578 | ||
579 | hi_freq = cur_freq; | |
e2eb6392 | 580 | value = of_get_property(cpunode, "reduced-clock-frequency", NULL); |
14cf11af PM |
581 | if (!value) |
582 | return 1; | |
583 | low_freq = (*value) / 1000; | |
584 | ||
585 | volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); | |
586 | if (volt_gpio_np) | |
587 | voltage_gpio = read_gpio(volt_gpio_np); | |
588 | ||
8d10dc28 | 589 | of_node_put(volt_gpio_np); |
14cf11af PM |
590 | pvr = mfspr(SPRN_PVR); |
591 | has_cpu_l2lve = !((pvr & 0xf00) == 0x100); | |
592 | ||
593 | set_speed_proc = cpu_750fx_cpu_speed; | |
594 | get_speed_proc = cpu_750fx_get_cpu_speed; | |
595 | cur_freq = cpu_750fx_get_cpu_speed(); | |
596 | ||
597 | return 0; | |
598 | } | |
599 | ||
600 | /* Currently, we support the following machines: | |
601 | * | |
602 | * - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz) | |
603 | * - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz) | |
604 | * - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz) | |
605 | * - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz) | |
606 | * - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz) | |
607 | * - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage) | |
608 | * - Recent MacRISC3 laptops | |
609 | * - All new machines with 7447A CPUs | |
610 | */ | |
611 | static int __init pmac_cpufreq_setup(void) | |
612 | { | |
613 | struct device_node *cpunode; | |
018a3d1d | 614 | const u32 *value; |
14cf11af | 615 | |
3e47d147 | 616 | if (strstr(boot_command_line, "nocpufreq")) |
14cf11af PM |
617 | return 0; |
618 | ||
1037b275 SH |
619 | /* Get first CPU node */ |
620 | cpunode = of_cpu_device_node_get(0); | |
14cf11af PM |
621 | if (!cpunode) |
622 | goto out; | |
623 | ||
624 | /* Get current cpu clock freq */ | |
e2eb6392 | 625 | value = of_get_property(cpunode, "clock-frequency", NULL); |
14cf11af PM |
626 | if (!value) |
627 | goto out; | |
628 | cur_freq = (*value) / 1000; | |
629 | ||
630 | /* Check for 7447A based MacRISC3 */ | |
71a157e8 | 631 | if (of_machine_is_compatible("MacRISC3") && |
e2eb6392 | 632 | of_get_property(cpunode, "dynamic-power-step", NULL) && |
14cf11af PM |
633 | PVR_VER(mfspr(SPRN_PVR)) == 0x8003) { |
634 | pmac_cpufreq_init_7447A(cpunode); | |
fe829ed8 VK |
635 | |
636 | /* Allow dynamic switching */ | |
bb29b719 | 637 | transition_latency = 8000000; |
fe829ed8 | 638 | pmac_cpufreq_driver.flags &= ~CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING; |
14cf11af | 639 | /* Check for other MacRISC3 machines */ |
71a157e8 GL |
640 | } else if (of_machine_is_compatible("PowerBook3,4") || |
641 | of_machine_is_compatible("PowerBook3,5") || | |
642 | of_machine_is_compatible("MacRISC3")) { | |
14cf11af PM |
643 | pmac_cpufreq_init_MacRISC3(cpunode); |
644 | /* Else check for iBook2 500/600 */ | |
71a157e8 | 645 | } else if (of_machine_is_compatible("PowerBook4,1")) { |
14cf11af PM |
646 | hi_freq = cur_freq; |
647 | low_freq = 400000; | |
648 | set_speed_proc = pmu_set_cpu_speed; | |
649 | is_pmu_based = 1; | |
650 | } | |
5629d41d | 651 | /* Else check for TiPb 550 */ |
71a157e8 | 652 | else if (of_machine_is_compatible("PowerBook3,3") && cur_freq == 550000) { |
5629d41d PM |
653 | hi_freq = cur_freq; |
654 | low_freq = 500000; | |
655 | set_speed_proc = pmu_set_cpu_speed; | |
656 | is_pmu_based = 1; | |
657 | } | |
14cf11af | 658 | /* Else check for TiPb 400 & 500 */ |
71a157e8 | 659 | else if (of_machine_is_compatible("PowerBook3,2")) { |
14cf11af PM |
660 | /* We only know about the 400 MHz and the 500Mhz model |
661 | * they both have 300 MHz as low frequency | |
662 | */ | |
663 | if (cur_freq < 350000 || cur_freq > 550000) | |
664 | goto out; | |
665 | hi_freq = cur_freq; | |
666 | low_freq = 300000; | |
667 | set_speed_proc = pmu_set_cpu_speed; | |
668 | is_pmu_based = 1; | |
669 | } | |
670 | /* Else check for 750FX */ | |
671 | else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000) | |
672 | pmac_cpufreq_init_750FX(cpunode); | |
673 | out: | |
1658ab66 | 674 | of_node_put(cpunode); |
14cf11af PM |
675 | if (set_speed_proc == NULL) |
676 | return -ENODEV; | |
677 | ||
678 | pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq; | |
679 | pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq; | |
4350147a | 680 | ppc_proc_freq = cur_freq * 1000ul; |
14cf11af | 681 | |
b49c22a6 JP |
682 | pr_info("Registering PowerMac CPU frequency driver\n"); |
683 | pr_info("Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n", | |
684 | low_freq/1000, hi_freq/1000, cur_freq/1000); | |
14cf11af PM |
685 | |
686 | return cpufreq_register_driver(&pmac_cpufreq_driver); | |
687 | } | |
688 | ||
689 | module_init(pmac_cpufreq_setup); | |
690 |