[mirror_ubuntu-bionic-kernel.git] / drivers / cpufreq / speedstep-ich.c

/*
 * (C) 2001  Dave Jones, Arjan van de ven.
 * (C) 2002 - 2003  Dominik Brodowski <linux@brodo.de>
 *
 *  Licensed under the terms of the GNU GPL License version 2.
 *  Based upon reverse engineered information, and on Intel documentation
 *  for chipsets ICH2-M and ICH3-M.
 *
 *  Many thanks to Ducrot Bruno for finding and fixing the last
 *  "missing link" for ICH2-M/ICH3-M support, and to Thomas Winkler
 *  for extensive testing.
 *
 *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
 */


/*********************************************************************
 *                        SPEEDSTEP - DEFINITIONS                    *
 *********************************************************************/

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/pci.h>
#include <linux/sched.h>

#include "speedstep-lib.h"


/* speedstep_chipset:
 *   It is necessary to know which chipset is used. As accesses to
 * this device occur at various places in this module, we need a
 * static struct pci_dev * pointing to that device.
 */
static struct pci_dev *speedstep_chipset_dev;


/* speedstep_processor
 */
static enum speedstep_processor speedstep_processor;

static u32 pmbase;

/*
 *   There are only two frequency states for each processor. Values
 * are in kHz for the time being.
 */
static struct cpufreq_frequency_table speedstep_freqs[] = {
	{SPEEDSTEP_HIGH,	0},
	{SPEEDSTEP_LOW,		0},
	{0,			CPUFREQ_TABLE_END},
};


/**
 * speedstep_find_register - read the PMBASE address
 *
 * Returns: -ENODEV if no register could be found
 */
static int speedstep_find_register(void)
{
	if (!speedstep_chipset_dev)
		return -ENODEV;

	/* get PMBASE */
	pci_read_config_dword(speedstep_chipset_dev, 0x40, &pmbase);
	if (!(pmbase & 0x01)) {
		printk(KERN_ERR "speedstep-ich: could not find speedstep register\n");
		return -ENODEV;
	}

	pmbase &= 0xFFFFFFFE;
	if (!pmbase) {
		printk(KERN_ERR "speedstep-ich: could not find speedstep register\n");
		return -ENODEV;
	}

	pr_debug("pmbase is 0x%x\n", pmbase);
	return 0;
}

/**
 * speedstep_set_state - set the SpeedStep state
 * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
 *
 *   Tries to change the SpeedStep state.  Can be called from
 *   smp_call_function_single.
 */
static void speedstep_set_state(unsigned int state)
{
	u8 pm2_blk;
	u8 value;
	unsigned long flags;

	if (state > 0x1)
		return;

	/* Disable IRQs */
	local_irq_save(flags);

	/* read state */
	value = inb(pmbase + 0x50);

	pr_debug("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);

	/* write new state */
	value &= 0xFE;
	value |= state;

	pr_debug("writing 0x%x to pmbase 0x%x + 0x50\n", value, pmbase);

	/* Disable bus master arbitration */
	pm2_blk = inb(pmbase + 0x20);
	pm2_blk |= 0x01;
	outb(pm2_blk, (pmbase + 0x20));

	/* Actual transition */
	outb(value, (pmbase + 0x50));

	/* Restore bus master arbitration */
	pm2_blk &= 0xfe;
	outb(pm2_blk, (pmbase + 0x20));

	/* check if transition was successful */
	value = inb(pmbase + 0x50);

	/* Enable IRQs */
	local_irq_restore(flags);

	pr_debug("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);

	if (state == (value & 0x1))
		pr_debug("change to %u MHz succeeded\n",
			speedstep_get_frequency(speedstep_processor) / 1000);
	else
		printk(KERN_ERR "cpufreq: change failed - I/O error\n");

	return;
}

/* Wrapper for smp_call_function_single. */
static void _speedstep_set_state(void *_state)
{
	speedstep_set_state(*(unsigned int *)_state);
}

/**
 * speedstep_activate - activate SpeedStep control in the chipset
 *
 *   Tries to activate the SpeedStep status and control registers.
 * Returns -EINVAL on an unsupported chipset, and zero on success.
 */
static int speedstep_activate(void)
{
	u16 value = 0;

	if (!speedstep_chipset_dev)
		return -EINVAL;

	pci_read_config_word(speedstep_chipset_dev, 0x00A0, &value);
	if (!(value & 0x08)) {
		value |= 0x08;
		pr_debug("activating SpeedStep (TM) registers\n");
		pci_write_config_word(speedstep_chipset_dev, 0x00A0, value);
	}

	return 0;
}


/**
 * speedstep_detect_chipset - detect the Southbridge which contains SpeedStep logic
 *
 *   Detects ICH2-M, ICH3-M and ICH4-M so far. The pci_dev points to
 * the LPC bridge / PM module which contains all power-management
 * functions. Returns the SPEEDSTEP_CHIPSET_-number for the detected
 * chipset, or zero on failure.
 */
static unsigned int speedstep_detect_chipset(void)
{
	speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
			      PCI_DEVICE_ID_INTEL_82801DB_12,
			      PCI_ANY_ID, PCI_ANY_ID,
			      NULL);
	if (speedstep_chipset_dev)
		return 4; /* 4-M */

	speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
			      PCI_DEVICE_ID_INTEL_82801CA_12,
			      PCI_ANY_ID, PCI_ANY_ID,
			      NULL);
	if (speedstep_chipset_dev)
		return 3; /* 3-M */


	speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
			      PCI_DEVICE_ID_INTEL_82801BA_10,
			      PCI_ANY_ID, PCI_ANY_ID,
			      NULL);
	if (speedstep_chipset_dev) {
		/* speedstep.c causes lockups on Dell Inspirons 8000 and
		 * 8100 which use a pretty old revision of the 82815
		 * host brige. Abort on these systems.
		 */
		static struct pci_dev *hostbridge;

		hostbridge  = pci_get_subsys(PCI_VENDOR_ID_INTEL,
			      PCI_DEVICE_ID_INTEL_82815_MC,
			      PCI_ANY_ID, PCI_ANY_ID,
			      NULL);

		if (!hostbridge)
			return 2; /* 2-M */

		if (hostbridge->revision < 5) {
			pr_debug("hostbridge does not support speedstep\n");
			speedstep_chipset_dev = NULL;
			pci_dev_put(hostbridge);
			return 0;
		}

		pci_dev_put(hostbridge);
		return 2; /* 2-M */
	}

	return 0;
}

static void get_freq_data(void *_speed)
{
	unsigned int *speed = _speed;

	*speed = speedstep_get_frequency(speedstep_processor);
}

static unsigned int speedstep_get(unsigned int cpu)
{
	unsigned int speed;

	/* You're supposed to ensure CPU is online. */
	if (smp_call_function_single(cpu, get_freq_data, &speed, 1) != 0)
		BUG();

	pr_debug("detected %u kHz as current frequency\n", speed);
	return speed;
}

/**
 * speedstep_target - set a new CPUFreq policy
 * @policy: new policy
 * @target_freq: the target frequency
 * @relation: how that frequency relates to achieved frequency
 *	(CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
 *
 * Sets a new CPUFreq policy.
 */
static int speedstep_target(struct cpufreq_policy *policy,
			     unsigned int target_freq,
			     unsigned int relation)
{
	unsigned int newstate = 0, policy_cpu;
	struct cpufreq_freqs freqs;
	int i;

	if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0],
				target_freq, relation, &newstate))
		return -EINVAL;

	policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask);
	freqs.old = speedstep_get(policy_cpu);
	freqs.new = speedstep_freqs[newstate].frequency;
	freqs.cpu = policy->cpu;

	pr_debug("transiting from %u to %u kHz\n", freqs.old, freqs.new);

	/* no transition necessary */
	if (freqs.old == freqs.new)
		return 0;

	for_each_cpu(i, policy->cpus) {
		freqs.cpu = i;
		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
	}

	smp_call_function_single(policy_cpu, _speedstep_set_state, &newstate,
				 true);

	for_each_cpu(i, policy->cpus) {
		freqs.cpu = i;
		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
	}

	return 0;
}


/**
 * speedstep_verify - verifies a new CPUFreq policy
 * @policy: new policy
 *
 * Limit must be within speedstep_low_freq and speedstep_high_freq, with
 * at least one border included.
 */
static int speedstep_verify(struct cpufreq_policy *policy)
{
	return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]);
}

struct get_freqs {
	struct cpufreq_policy *policy;
	int ret;
};

static void get_freqs_on_cpu(void *_get_freqs)
{
	struct get_freqs *get_freqs = _get_freqs;

	get_freqs->ret =
		speedstep_get_freqs(speedstep_processor,
			    &speedstep_freqs[SPEEDSTEP_LOW].frequency,
			    &speedstep_freqs[SPEEDSTEP_HIGH].frequency,
			    &get_freqs->policy->cpuinfo.transition_latency,
			    &speedstep_set_state);
}

static int speedstep_cpu_init(struct cpufreq_policy *policy)
{
	int result;
	unsigned int policy_cpu, speed;
	struct get_freqs gf;

	/* only run on CPU to be set, or on its sibling */
#ifdef CONFIG_SMP
	cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu));
#endif
	policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask);

	/* detect low and high frequency and transition latency */
	gf.policy = policy;
	smp_call_function_single(policy_cpu, get_freqs_on_cpu, &gf, 1);
	if (gf.ret)
		return gf.ret;

	/* get current speed setting */
	speed = speedstep_get(policy_cpu);
	if (!speed)
		return -EIO;

	pr_debug("currently at %s speed setting - %i MHz\n",
		(speed == speedstep_freqs[SPEEDSTEP_LOW].frequency)
		? "low" : "high",
		(speed / 1000));

	/* cpuinfo and default policy values */
	policy->cur = speed;

	result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs);
	if (result)
		return result;

	cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu);

	return 0;
}


static int speedstep_cpu_exit(struct cpufreq_policy *policy)
{
	cpufreq_frequency_table_put_attr(policy->cpu);
	return 0;
}

static struct freq_attr *speedstep_attr[] = {
	&cpufreq_freq_attr_scaling_available_freqs,
	NULL,
};


static struct cpufreq_driver speedstep_driver = {
	.name	= "speedstep-ich",
	.verify	= speedstep_verify,
	.target	= speedstep_target,
	.init	= speedstep_cpu_init,
	.exit	= speedstep_cpu_exit,
	.get	= speedstep_get,
	.owner	= THIS_MODULE,
	.attr	= speedstep_attr,
};


/**
 * speedstep_init - initializes the SpeedStep CPUFreq driver
 *
 *   Initializes the SpeedStep support. Returns -ENODEV on unsupported
 * devices, -EINVAL on problems during initiatization, and zero on
 * success.
 */
static int __init speedstep_init(void)
{
	/* detect processor */
	speedstep_processor = speedstep_detect_processor();
	if (!speedstep_processor) {
		pr_debug("Intel(R) SpeedStep(TM) capable processor "
				"not found\n");
		return -ENODEV;
	}

	/* detect chipset */
	if (!speedstep_detect_chipset()) {
		pr_debug("Intel(R) SpeedStep(TM) for this chipset not "
				"(yet) available.\n");
		return -ENODEV;
	}

	/* activate speedstep support */
	if (speedstep_activate()) {
		pci_dev_put(speedstep_chipset_dev);
		return -EINVAL;
	}

	if (speedstep_find_register())
		return -ENODEV;

	return cpufreq_register_driver(&speedstep_driver);
}


/**
 * speedstep_exit - unregisters SpeedStep support
 *
 *   Unregisters SpeedStep support.
 */
static void __exit speedstep_exit(void)
{
	pci_dev_put(speedstep_chipset_dev);
	cpufreq_unregister_driver(&speedstep_driver);
}


MODULE_AUTHOR("Dave Jones <davej@redhat.com>, "
		"Dominik Brodowski <linux@brodo.de>");
MODULE_DESCRIPTION("Speedstep driver for Intel mobile processors on chipsets "
		"with ICH-M southbridges.");
MODULE_LICENSE("GPL");

module_init(speedstep_init);
module_exit(speedstep_exit);
Commit	Line	Data
1da177e4 LT	1	/*
	2	* (C) 2001 Dave Jones, Arjan van de ven.
	3	* (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
	4	*
	5	* Licensed under the terms of the GNU GPL License version 2.
	6	* Based upon reverse engineered information, and on Intel documentation
	7	* for chipsets ICH2-M and ICH3-M.
	8	*
	9	* Many thanks to Ducrot Bruno for finding and fixing the last
	10	* "missing link" for ICH2-M/ICH3-M support, and to Thomas Winkler
	11	* for extensive testing.
	12	*
	13	* BIG FAT DISCLAIMER: Work in progress code. Possibly dangerous
	14	*/
	15
	16
	17	/*********************************************************************
	18	* SPEEDSTEP - DEFINITIONS *
	19	*********************************************************************/
	20
	21	#include <linux/kernel.h>
	22	#include <linux/module.h>
	23	#include <linux/init.h>
	24	#include <linux/cpufreq.h>
	25	#include <linux/pci.h>
e8edc6e0	26	#include <linux/sched.h>
1da177e4 LT	27
	28	#include "speedstep-lib.h"
	29
	30
	31	/* speedstep_chipset:
	32	* It is necessary to know which chipset is used. As accesses to
	33	* this device occur at various places in this module, we need a
	34	* static struct pci_dev * pointing to that device.
	35	*/
	36	static struct pci_dev *speedstep_chipset_dev;
	37
	38
	39	/* speedstep_processor
	40	*/
1cce76c2	41	static enum speedstep_processor speedstep_processor;
1da177e4	42
9a7d82a8	43	static u32 pmbase;
1da177e4 LT	44
	45	/*
	46	* There are only two frequency states for each processor. Values
	47	* are in kHz for the time being.
	48	*/
	49	static struct cpufreq_frequency_table speedstep_freqs[] = {
	50	{SPEEDSTEP_HIGH, 0},
	51	{SPEEDSTEP_LOW, 0},
	52	{0, CPUFREQ_TABLE_END},
	53	};
	54
	55
1da177e4	56	/**
9a7d82a8	57	* speedstep_find_register - read the PMBASE address
1da177e4	58	*
9a7d82a8	59	* Returns: -ENODEV if no register could be found
1da177e4	60	*/
bbfebd66	61	static int speedstep_find_register(void)
1da177e4	62	{
9a7d82a8 MD	63	if (!speedstep_chipset_dev)
9a7d82a8 MD	64	return -ENODEV;
1da177e4 LT	65
	66	/* get PMBASE */
	67	pci_read_config_dword(speedstep_chipset_dev, 0x40, &pmbase);
	68	if (!(pmbase & 0x01)) {
	69	printk(KERN_ERR "speedstep-ich: could not find speedstep register\n");
9a7d82a8	70	return -ENODEV;
1da177e4 LT	71	}
	72
	73	pmbase &= 0xFFFFFFFE;
	74	if (!pmbase) {
	75	printk(KERN_ERR "speedstep-ich: could not find speedstep register\n");
9a7d82a8	76	return -ENODEV;
1da177e4 LT	77	}
1da177e4 LT	78
2d06d8c4	79	pr_debug("pmbase is 0x%x\n", pmbase);
9a7d82a8 MD	80	return 0;
	81	}
	82
	83	/**
	84	* speedstep_set_state - set the SpeedStep state
	85	* @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
	86	*
394122ab RR	87	* Tries to change the SpeedStep state. Can be called from
394122ab RR	88	* smp_call_function_single.
9a7d82a8	89	*/
bbfebd66	90	static void speedstep_set_state(unsigned int state)
9a7d82a8 MD	91	{
	92	u8 pm2_blk;
	93	u8 value;
	94	unsigned long flags;
	95
	96	if (state > 0x1)
	97	return;
	98
1da177e4 LT	99	/* Disable IRQs */
	100	local_irq_save(flags);
	101
	102	/* read state */
	103	value = inb(pmbase + 0x50);
	104
2d06d8c4	105	pr_debug("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
1da177e4 LT	106
	107	/* write new state */
	108	value &= 0xFE;
	109	value \|= state;
	110
2d06d8c4	111	pr_debug("writing 0x%x to pmbase 0x%x + 0x50\n", value, pmbase);
1da177e4 LT	112
	113	/* Disable bus master arbitration */
	114	pm2_blk = inb(pmbase + 0x20);
	115	pm2_blk \|= 0x01;
	116	outb(pm2_blk, (pmbase + 0x20));
	117
	118	/* Actual transition */
	119	outb(value, (pmbase + 0x50));
	120
	121	/* Restore bus master arbitration */
	122	pm2_blk &= 0xfe;
	123	outb(pm2_blk, (pmbase + 0x20));
	124
	125	/* check if transition was successful */
	126	value = inb(pmbase + 0x50);
	127
	128	/* Enable IRQs */
	129	local_irq_restore(flags);
	130
2d06d8c4	131	pr_debug("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
1da177e4	132
bbfebd66	133	if (state == (value & 0x1))
2d06d8c4	134	pr_debug("change to %u MHz succeeded\n",
bbfebd66 DJ	135	speedstep_get_frequency(speedstep_processor) / 1000);
	136	else
	137	printk(KERN_ERR "cpufreq: change failed - I/O error\n");
1da177e4 LT	138
	139	return;
	140	}
	141
394122ab RR	142	/* Wrapper for smp_call_function_single. */
	143	static void _speedstep_set_state(void *_state)
	144	{
	145	speedstep_set_state((unsigned int )_state);
	146	}
1da177e4 LT	147
	148	/**
	149	* speedstep_activate - activate SpeedStep control in the chipset
	150	*
	151	* Tries to activate the SpeedStep status and control registers.
	152	* Returns -EINVAL on an unsupported chipset, and zero on success.
	153	*/
bbfebd66	154	static int speedstep_activate(void)
1da177e4 LT	155	{
	156	u16 value = 0;
	157
	158	if (!speedstep_chipset_dev)
	159	return -EINVAL;
	160
	161	pci_read_config_word(speedstep_chipset_dev, 0x00A0, &value);
	162	if (!(value & 0x08)) {
	163	value \|= 0x08;
2d06d8c4	164	pr_debug("activating SpeedStep (TM) registers\n");
1da177e4 LT	165	pci_write_config_word(speedstep_chipset_dev, 0x00A0, value);
	166	}
	167
	168	return 0;
	169	}
	170
	171
	172	/**
	173	* speedstep_detect_chipset - detect the Southbridge which contains SpeedStep logic
	174	*
	175	* Detects ICH2-M, ICH3-M and ICH4-M so far. The pci_dev points to
	176	* the LPC bridge / PM module which contains all power-management
	177	* functions. Returns the SPEEDSTEP_CHIPSET_-number for the detected
	178	* chipset, or zero on failure.
	179	*/
bbfebd66	180	static unsigned int speedstep_detect_chipset(void)
1da177e4 LT	181	{
	182	speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
	183	PCI_DEVICE_ID_INTEL_82801DB_12,
bbfebd66	184	PCI_ANY_ID, PCI_ANY_ID,
1da177e4 LT	185	NULL);
	186	if (speedstep_chipset_dev)
	187	return 4; /* 4-M */
	188
	189	speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
	190	PCI_DEVICE_ID_INTEL_82801CA_12,
bbfebd66	191	PCI_ANY_ID, PCI_ANY_ID,
1da177e4 LT	192	NULL);
	193	if (speedstep_chipset_dev)
	194	return 3; /* 3-M */
	195
	196
	197	speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
	198	PCI_DEVICE_ID_INTEL_82801BA_10,
bbfebd66	199	PCI_ANY_ID, PCI_ANY_ID,
1da177e4 LT	200	NULL);
	201	if (speedstep_chipset_dev) {
	202	/* speedstep.c causes lockups on Dell Inspirons 8000 and
	203	* 8100 which use a pretty old revision of the 82815
	204	* host brige. Abort on these systems.
	205	*/
	206	static struct pci_dev *hostbridge;
1da177e4 LT	207
	208	hostbridge = pci_get_subsys(PCI_VENDOR_ID_INTEL,
	209	PCI_DEVICE_ID_INTEL_82815_MC,
bbfebd66	210	PCI_ANY_ID, PCI_ANY_ID,
1da177e4 LT	211	NULL);
	212
	213	if (!hostbridge)
	214	return 2; /* 2-M */
	215
44c10138	216	if (hostbridge->revision < 5) {
2d06d8c4	217	pr_debug("hostbridge does not support speedstep\n");
1da177e4 LT	218	speedstep_chipset_dev = NULL;
	219	pci_dev_put(hostbridge);
	220	return 0;
	221	}
	222
	223	pci_dev_put(hostbridge);
	224	return 2; /* 2-M */
	225	}
	226
	227	return 0;
	228	}
	229
8dca15e4	230	static void get_freq_data(void *_speed)
394122ab	231	{
8dca15e4	232	unsigned int *speed = _speed;
394122ab	233
8dca15e4	234	*speed = speedstep_get_frequency(speedstep_processor);
1da177e4 LT	235	}
	236
	237	static unsigned int speedstep_get(unsigned int cpu)
	238	{
8dca15e4	239	unsigned int speed;
394122ab RR	240
394122ab RR	241	/* You're supposed to ensure CPU is online. */
8dca15e4	242	if (smp_call_function_single(cpu, get_freq_data, &speed, 1) != 0)
394122ab RR	243	BUG();
394122ab RR	244
2d06d8c4	245	pr_debug("detected %u kHz as current frequency\n", speed);
8dca15e4	246	return speed;
1da177e4 LT	247	}
	248
	249	/**
	250	* speedstep_target - set a new CPUFreq policy
	251	* @policy: new policy
	252	* @target_freq: the target frequency
bbfebd66 DJ	253	* @relation: how that frequency relates to achieved frequency
bbfebd66 DJ	254	* (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
1da177e4 LT	255	*
	256	* Sets a new CPUFreq policy.
	257	*/
bbfebd66	258	static int speedstep_target(struct cpufreq_policy *policy,
1da177e4 LT	259	unsigned int target_freq,
	260	unsigned int relation)
	261	{
394122ab	262	unsigned int newstate = 0, policy_cpu;
1da177e4	263	struct cpufreq_freqs freqs;
1da177e4 LT	264	int i;
1da177e4 LT	265
bbfebd66 DJ	266	if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0],
bbfebd66 DJ	267	target_freq, relation, &newstate))
1da177e4 LT	268	return -EINVAL;
1da177e4 LT	269
394122ab RR	270	policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask);
394122ab RR	271	freqs.old = speedstep_get(policy_cpu);
1da177e4 LT	272	freqs.new = speedstep_freqs[newstate].frequency;
	273	freqs.cpu = policy->cpu;
	274
2d06d8c4	275	pr_debug("transiting from %u to %u kHz\n", freqs.old, freqs.new);
1da177e4 LT	276
	277	/* no transition necessary */
	278	if (freqs.old == freqs.new)
	279	return 0;
	280
835481d9	281	for_each_cpu(i, policy->cpus) {
1da177e4 LT	282	freqs.cpu = i;
	283	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
	284	}
	285
394122ab RR	286	smp_call_function_single(policy_cpu, _speedstep_set_state, &newstate,
394122ab RR	287	true);
1da177e4	288
835481d9	289	for_each_cpu(i, policy->cpus) {
1da177e4 LT	290	freqs.cpu = i;
	291	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
	292	}
	293
	294	return 0;
	295	}
	296
	297
	298	/**
	299	* speedstep_verify - verifies a new CPUFreq policy
	300	* @policy: new policy
	301	*
	302	* Limit must be within speedstep_low_freq and speedstep_high_freq, with
	303	* at least one border included.
	304	*/
bbfebd66	305	static int speedstep_verify(struct cpufreq_policy *policy)
1da177e4 LT	306	{
	307	return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]);
	308	}
	309
394122ab RR	310	struct get_freqs {
	311	struct cpufreq_policy *policy;
	312	int ret;
	313	};
	314
	315	static void get_freqs_on_cpu(void *_get_freqs)
	316	{
	317	struct get_freqs *get_freqs = _get_freqs;
	318
	319	get_freqs->ret =
	320	speedstep_get_freqs(speedstep_processor,
	321	&speedstep_freqs[SPEEDSTEP_LOW].frequency,
	322	&speedstep_freqs[SPEEDSTEP_HIGH].frequency,
	323	&get_freqs->policy->cpuinfo.transition_latency,
	324	&speedstep_set_state);
	325	}
1da177e4 LT	326
	327	static int speedstep_cpu_init(struct cpufreq_policy *policy)
	328	{
394122ab RR	329	int result;
	330	unsigned int policy_cpu, speed;
	331	struct get_freqs gf;
1da177e4 LT	332
	333	/* only run on CPU to be set, or on its sibling */
	334	#ifdef CONFIG_SMP
7ad728f9	335	cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu));
1da177e4	336	#endif
394122ab	337	policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask);
1da177e4	338
1a10760c	339	/* detect low and high frequency and transition latency */
394122ab RR	340	gf.policy = policy;
	341	smp_call_function_single(policy_cpu, get_freqs_on_cpu, &gf, 1);
	342	if (gf.ret)
	343	return gf.ret;
1da177e4 LT	344
1da177e4 LT	345	/* get current speed setting */
394122ab	346	speed = speedstep_get(policy_cpu);
1da177e4 LT	347	if (!speed)
	348	return -EIO;
	349
2d06d8c4	350	pr_debug("currently at %s speed setting - %i MHz\n",
bbfebd66 DJ	351	(speed == speedstep_freqs[SPEEDSTEP_LOW].frequency)
bbfebd66 DJ	352	? "low" : "high",
1da177e4 LT	353	(speed / 1000));
	354
	355	/* cpuinfo and default policy values */
1da177e4 LT	356	policy->cur = speed;
	357
	358	result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs);
	359	if (result)
bbfebd66	360	return result;
1da177e4	361
bbfebd66	362	cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu);
1da177e4 LT	363
	364	return 0;
	365	}
	366
	367
	368	static int speedstep_cpu_exit(struct cpufreq_policy *policy)
	369	{
	370	cpufreq_frequency_table_put_attr(policy->cpu);
	371	return 0;
	372	}
	373
bbfebd66	374	static struct freq_attr *speedstep_attr[] = {
1da177e4 LT	375	&cpufreq_freq_attr_scaling_available_freqs,
	376	NULL,
	377	};
	378
	379
221dee28	380	static struct cpufreq_driver speedstep_driver = {
1da177e4 LT	381	.name = "speedstep-ich",
	382	.verify = speedstep_verify,
	383	.target = speedstep_target,
	384	.init = speedstep_cpu_init,
	385	.exit = speedstep_cpu_exit,
	386	.get = speedstep_get,
	387	.owner = THIS_MODULE,
	388	.attr = speedstep_attr,
	389	};
	390
	391
	392	/**
	393	* speedstep_init - initializes the SpeedStep CPUFreq driver
	394	*
	395	* Initializes the SpeedStep support. Returns -ENODEV on unsupported
	396	* devices, -EINVAL on problems during initiatization, and zero on
	397	* success.
	398	*/
	399	static int __init speedstep_init(void)
	400	{
	401	/* detect processor */
	402	speedstep_processor = speedstep_detect_processor();
	403	if (!speedstep_processor) {
2d06d8c4	404	pr_debug("Intel(R) SpeedStep(TM) capable processor "
bbfebd66	405	"not found\n");
1da177e4 LT	406	return -ENODEV;
	407	}
	408
	409	/* detect chipset */
	410	if (!speedstep_detect_chipset()) {
2d06d8c4	411	pr_debug("Intel(R) SpeedStep(TM) for this chipset not "
bbfebd66	412	"(yet) available.\n");
1da177e4 LT	413	return -ENODEV;
	414	}
	415
	416	/* activate speedstep support */
	417	if (speedstep_activate()) {
	418	pci_dev_put(speedstep_chipset_dev);
	419	return -EINVAL;
	420	}
	421
9a7d82a8 MD	422	if (speedstep_find_register())
	423	return -ENODEV;
	424
1da177e4 LT	425	return cpufreq_register_driver(&speedstep_driver);
	426	}
	427
	428
	429	/**
	430	* speedstep_exit - unregisters SpeedStep support
	431	*
	432	* Unregisters SpeedStep support.
	433	*/
	434	static void __exit speedstep_exit(void)
	435	{
	436	pci_dev_put(speedstep_chipset_dev);
	437	cpufreq_unregister_driver(&speedstep_driver);
	438	}
	439
	440
bbfebd66 DJ	441	MODULE_AUTHOR("Dave Jones <davej@redhat.com>, "
	442	"Dominik Brodowski <linux@brodo.de>");
	443	MODULE_DESCRIPTION("Speedstep driver for Intel mobile processors on chipsets "
	444	"with ICH-M southbridges.");
	445	MODULE_LICENSE("GPL");
1da177e4 LT	446
	447	module_init(speedstep_init);
	448	module_exit(speedstep_exit);