]>
Commit | Line | Data |
---|---|---|
e8689e63 LW |
1 | /* |
2 | * Copyright (c) 2006 ARM Ltd. | |
3 | * Copyright (c) 2010 ST-Ericsson SA | |
4 | * | |
5 | * Author: Peter Pearse <peter.pearse@arm.com> | |
6 | * Author: Linus Walleij <linus.walleij@stericsson.com> | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or modify it | |
9 | * under the terms of the GNU General Public License as published by the Free | |
10 | * Software Foundation; either version 2 of the License, or (at your option) | |
11 | * any later version. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, but WITHOUT | |
14 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
15 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
16 | * more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License along with | |
19 | * this program; if not, write to the Free Software Foundation, Inc., 59 | |
20 | * Temple Place - Suite 330, Boston, MA 02111-1307, USA. | |
21 | * | |
94ae8522 RKAL |
22 | * The full GNU General Public License is in this distribution in the file |
23 | * called COPYING. | |
e8689e63 LW |
24 | * |
25 | * Documentation: ARM DDI 0196G == PL080 | |
94ae8522 | 26 | * Documentation: ARM DDI 0218E == PL081 |
e8689e63 | 27 | * |
94ae8522 RKAL |
28 | * PL080 & PL081 both have 16 sets of DMA signals that can be routed to any |
29 | * channel. | |
e8689e63 LW |
30 | * |
31 | * The PL080 has 8 channels available for simultaneous use, and the PL081 | |
32 | * has only two channels. So on these DMA controllers the number of channels | |
33 | * and the number of incoming DMA signals are two totally different things. | |
34 | * It is usually not possible to theoretically handle all physical signals, | |
35 | * so a multiplexing scheme with possible denial of use is necessary. | |
36 | * | |
37 | * The PL080 has a dual bus master, PL081 has a single master. | |
38 | * | |
39 | * Memory to peripheral transfer may be visualized as | |
40 | * Get data from memory to DMAC | |
41 | * Until no data left | |
42 | * On burst request from peripheral | |
43 | * Destination burst from DMAC to peripheral | |
44 | * Clear burst request | |
45 | * Raise terminal count interrupt | |
46 | * | |
47 | * For peripherals with a FIFO: | |
48 | * Source burst size == half the depth of the peripheral FIFO | |
49 | * Destination burst size == the depth of the peripheral FIFO | |
50 | * | |
51 | * (Bursts are irrelevant for mem to mem transfers - there are no burst | |
52 | * signals, the DMA controller will simply facilitate its AHB master.) | |
53 | * | |
54 | * ASSUMES default (little) endianness for DMA transfers | |
55 | * | |
9dc2c200 RKAL |
56 | * The PL08x has two flow control settings: |
57 | * - DMAC flow control: the transfer size defines the number of transfers | |
58 | * which occur for the current LLI entry, and the DMAC raises TC at the | |
59 | * end of every LLI entry. Observed behaviour shows the DMAC listening | |
60 | * to both the BREQ and SREQ signals (contrary to documented), | |
61 | * transferring data if either is active. The LBREQ and LSREQ signals | |
62 | * are ignored. | |
63 | * | |
64 | * - Peripheral flow control: the transfer size is ignored (and should be | |
65 | * zero). The data is transferred from the current LLI entry, until | |
66 | * after the final transfer signalled by LBREQ or LSREQ. The DMAC | |
67 | * will then move to the next LLI entry. | |
68 | * | |
69 | * Only the former works sanely with scatter lists, so we only implement | |
70 | * the DMAC flow control method. However, peripherals which use the LBREQ | |
71 | * and LSREQ signals (eg, MMCI) are unable to use this mode, which through | |
72 | * these hardware restrictions prevents them from using scatter DMA. | |
e8689e63 LW |
73 | * |
74 | * Global TODO: | |
75 | * - Break out common code from arch/arm/mach-s3c64xx and share | |
76 | */ | |
730404ac | 77 | #include <linux/amba/bus.h> |
e8689e63 LW |
78 | #include <linux/amba/pl08x.h> |
79 | #include <linux/debugfs.h> | |
0c38d701 VK |
80 | #include <linux/delay.h> |
81 | #include <linux/device.h> | |
82 | #include <linux/dmaengine.h> | |
83 | #include <linux/dmapool.h> | |
84 | #include <linux/init.h> | |
85 | #include <linux/interrupt.h> | |
86 | #include <linux/module.h> | |
b7b6018b | 87 | #include <linux/pm_runtime.h> |
e8689e63 | 88 | #include <linux/seq_file.h> |
0c38d701 | 89 | #include <linux/slab.h> |
e8689e63 | 90 | #include <asm/hardware/pl080.h> |
e8689e63 LW |
91 | |
92 | #define DRIVER_NAME "pl08xdmac" | |
93 | ||
94 | /** | |
94ae8522 | 95 | * struct vendor_data - vendor-specific config parameters for PL08x derivatives |
e8689e63 | 96 | * @channels: the number of channels available in this variant |
94ae8522 | 97 | * @dualmaster: whether this version supports dual AHB masters or not. |
e8689e63 LW |
98 | */ |
99 | struct vendor_data { | |
e8689e63 LW |
100 | u8 channels; |
101 | bool dualmaster; | |
102 | }; | |
103 | ||
104 | /* | |
105 | * PL08X private data structures | |
e8b5e11d | 106 | * An LLI struct - see PL08x TRM. Note that next uses bit[0] as a bus bit, |
e25761d7 RKAL |
107 | * start & end do not - their bus bit info is in cctl. Also note that these |
108 | * are fixed 32-bit quantities. | |
e8689e63 | 109 | */ |
7cb72ad9 | 110 | struct pl08x_lli { |
e25761d7 RKAL |
111 | u32 src; |
112 | u32 dst; | |
bfddfb45 | 113 | u32 lli; |
e8689e63 LW |
114 | u32 cctl; |
115 | }; | |
116 | ||
117 | /** | |
118 | * struct pl08x_driver_data - the local state holder for the PL08x | |
119 | * @slave: slave engine for this instance | |
120 | * @memcpy: memcpy engine for this instance | |
121 | * @base: virtual memory base (remapped) for the PL08x | |
122 | * @adev: the corresponding AMBA (PrimeCell) bus entry | |
123 | * @vd: vendor data for this PL08x variant | |
124 | * @pd: platform data passed in from the platform/machine | |
125 | * @phy_chans: array of data for the physical channels | |
126 | * @pool: a pool for the LLI descriptors | |
127 | * @pool_ctr: counter of LLIs in the pool | |
3e27ee84 VK |
128 | * @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI |
129 | * fetches | |
30749cb4 | 130 | * @mem_buses: set to indicate memory transfers on AHB2. |
e8689e63 LW |
131 | * @lock: a spinlock for this struct |
132 | */ | |
133 | struct pl08x_driver_data { | |
134 | struct dma_device slave; | |
135 | struct dma_device memcpy; | |
136 | void __iomem *base; | |
137 | struct amba_device *adev; | |
f96ca9ec | 138 | const struct vendor_data *vd; |
e8689e63 LW |
139 | struct pl08x_platform_data *pd; |
140 | struct pl08x_phy_chan *phy_chans; | |
141 | struct dma_pool *pool; | |
142 | int pool_ctr; | |
30749cb4 RKAL |
143 | u8 lli_buses; |
144 | u8 mem_buses; | |
e8689e63 LW |
145 | spinlock_t lock; |
146 | }; | |
147 | ||
148 | /* | |
149 | * PL08X specific defines | |
150 | */ | |
151 | ||
e8689e63 LW |
152 | /* Size (bytes) of each LLI buffer allocated for one transfer */ |
153 | # define PL08X_LLI_TSFR_SIZE 0x2000 | |
154 | ||
e8b5e11d | 155 | /* Maximum times we call dma_pool_alloc on this pool without freeing */ |
7cb72ad9 | 156 | #define MAX_NUM_TSFR_LLIS (PL08X_LLI_TSFR_SIZE/sizeof(struct pl08x_lli)) |
e8689e63 LW |
157 | #define PL08X_ALIGN 8 |
158 | ||
159 | static inline struct pl08x_dma_chan *to_pl08x_chan(struct dma_chan *chan) | |
160 | { | |
161 | return container_of(chan, struct pl08x_dma_chan, chan); | |
162 | } | |
163 | ||
501e67e8 RKAL |
164 | static inline struct pl08x_txd *to_pl08x_txd(struct dma_async_tx_descriptor *tx) |
165 | { | |
166 | return container_of(tx, struct pl08x_txd, tx); | |
167 | } | |
168 | ||
e8689e63 LW |
169 | /* |
170 | * Physical channel handling | |
171 | */ | |
172 | ||
173 | /* Whether a certain channel is busy or not */ | |
174 | static int pl08x_phy_channel_busy(struct pl08x_phy_chan *ch) | |
175 | { | |
176 | unsigned int val; | |
177 | ||
178 | val = readl(ch->base + PL080_CH_CONFIG); | |
179 | return val & PL080_CONFIG_ACTIVE; | |
180 | } | |
181 | ||
182 | /* | |
183 | * Set the initial DMA register values i.e. those for the first LLI | |
e8b5e11d | 184 | * The next LLI pointer and the configuration interrupt bit have |
c885bee4 RKAL |
185 | * been set when the LLIs were constructed. Poke them into the hardware |
186 | * and start the transfer. | |
e8689e63 | 187 | */ |
c885bee4 RKAL |
188 | static void pl08x_start_txd(struct pl08x_dma_chan *plchan, |
189 | struct pl08x_txd *txd) | |
e8689e63 | 190 | { |
c885bee4 | 191 | struct pl08x_driver_data *pl08x = plchan->host; |
e8689e63 | 192 | struct pl08x_phy_chan *phychan = plchan->phychan; |
19524d77 | 193 | struct pl08x_lli *lli = &txd->llis_va[0]; |
09b3c323 | 194 | u32 val; |
c885bee4 RKAL |
195 | |
196 | plchan->at = txd; | |
e8689e63 | 197 | |
c885bee4 RKAL |
198 | /* Wait for channel inactive */ |
199 | while (pl08x_phy_channel_busy(phychan)) | |
200 | cpu_relax(); | |
e8689e63 | 201 | |
c885bee4 RKAL |
202 | dev_vdbg(&pl08x->adev->dev, |
203 | "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, " | |
19524d77 RKAL |
204 | "clli=0x%08x, cctl=0x%08x, ccfg=0x%08x\n", |
205 | phychan->id, lli->src, lli->dst, lli->lli, lli->cctl, | |
09b3c323 | 206 | txd->ccfg); |
19524d77 RKAL |
207 | |
208 | writel(lli->src, phychan->base + PL080_CH_SRC_ADDR); | |
209 | writel(lli->dst, phychan->base + PL080_CH_DST_ADDR); | |
210 | writel(lli->lli, phychan->base + PL080_CH_LLI); | |
211 | writel(lli->cctl, phychan->base + PL080_CH_CONTROL); | |
09b3c323 | 212 | writel(txd->ccfg, phychan->base + PL080_CH_CONFIG); |
c885bee4 RKAL |
213 | |
214 | /* Enable the DMA channel */ | |
215 | /* Do not access config register until channel shows as disabled */ | |
216 | while (readl(pl08x->base + PL080_EN_CHAN) & (1 << phychan->id)) | |
19386b32 | 217 | cpu_relax(); |
e8689e63 | 218 | |
c885bee4 RKAL |
219 | /* Do not access config register until channel shows as inactive */ |
220 | val = readl(phychan->base + PL080_CH_CONFIG); | |
e8689e63 | 221 | while ((val & PL080_CONFIG_ACTIVE) || (val & PL080_CONFIG_ENABLE)) |
c885bee4 | 222 | val = readl(phychan->base + PL080_CH_CONFIG); |
e8689e63 | 223 | |
c885bee4 | 224 | writel(val | PL080_CONFIG_ENABLE, phychan->base + PL080_CH_CONFIG); |
e8689e63 LW |
225 | } |
226 | ||
227 | /* | |
81796616 | 228 | * Pause the channel by setting the HALT bit. |
e8689e63 | 229 | * |
81796616 RKAL |
230 | * For M->P transfers, pause the DMAC first and then stop the peripheral - |
231 | * the FIFO can only drain if the peripheral is still requesting data. | |
232 | * (note: this can still timeout if the DMAC FIFO never drains of data.) | |
e8689e63 | 233 | * |
81796616 RKAL |
234 | * For P->M transfers, disable the peripheral first to stop it filling |
235 | * the DMAC FIFO, and then pause the DMAC. | |
e8689e63 LW |
236 | */ |
237 | static void pl08x_pause_phy_chan(struct pl08x_phy_chan *ch) | |
238 | { | |
239 | u32 val; | |
81796616 | 240 | int timeout; |
e8689e63 LW |
241 | |
242 | /* Set the HALT bit and wait for the FIFO to drain */ | |
243 | val = readl(ch->base + PL080_CH_CONFIG); | |
244 | val |= PL080_CONFIG_HALT; | |
245 | writel(val, ch->base + PL080_CH_CONFIG); | |
246 | ||
247 | /* Wait for channel inactive */ | |
81796616 RKAL |
248 | for (timeout = 1000; timeout; timeout--) { |
249 | if (!pl08x_phy_channel_busy(ch)) | |
250 | break; | |
251 | udelay(1); | |
252 | } | |
253 | if (pl08x_phy_channel_busy(ch)) | |
254 | pr_err("pl08x: channel%u timeout waiting for pause\n", ch->id); | |
e8689e63 LW |
255 | } |
256 | ||
257 | static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch) | |
258 | { | |
259 | u32 val; | |
260 | ||
261 | /* Clear the HALT bit */ | |
262 | val = readl(ch->base + PL080_CH_CONFIG); | |
263 | val &= ~PL080_CONFIG_HALT; | |
264 | writel(val, ch->base + PL080_CH_CONFIG); | |
265 | } | |
266 | ||
fb526210 RKAL |
267 | /* |
268 | * pl08x_terminate_phy_chan() stops the channel, clears the FIFO and | |
269 | * clears any pending interrupt status. This should not be used for | |
270 | * an on-going transfer, but as a method of shutting down a channel | |
271 | * (eg, when it's no longer used) or terminating a transfer. | |
272 | */ | |
273 | static void pl08x_terminate_phy_chan(struct pl08x_driver_data *pl08x, | |
274 | struct pl08x_phy_chan *ch) | |
e8689e63 | 275 | { |
fb526210 | 276 | u32 val = readl(ch->base + PL080_CH_CONFIG); |
e8689e63 | 277 | |
fb526210 RKAL |
278 | val &= ~(PL080_CONFIG_ENABLE | PL080_CONFIG_ERR_IRQ_MASK | |
279 | PL080_CONFIG_TC_IRQ_MASK); | |
e8689e63 | 280 | |
e8689e63 | 281 | writel(val, ch->base + PL080_CH_CONFIG); |
fb526210 RKAL |
282 | |
283 | writel(1 << ch->id, pl08x->base + PL080_ERR_CLEAR); | |
284 | writel(1 << ch->id, pl08x->base + PL080_TC_CLEAR); | |
e8689e63 LW |
285 | } |
286 | ||
287 | static inline u32 get_bytes_in_cctl(u32 cctl) | |
288 | { | |
289 | /* The source width defines the number of bytes */ | |
290 | u32 bytes = cctl & PL080_CONTROL_TRANSFER_SIZE_MASK; | |
291 | ||
292 | switch (cctl >> PL080_CONTROL_SWIDTH_SHIFT) { | |
293 | case PL080_WIDTH_8BIT: | |
294 | break; | |
295 | case PL080_WIDTH_16BIT: | |
296 | bytes *= 2; | |
297 | break; | |
298 | case PL080_WIDTH_32BIT: | |
299 | bytes *= 4; | |
300 | break; | |
301 | } | |
302 | return bytes; | |
303 | } | |
304 | ||
305 | /* The channel should be paused when calling this */ | |
306 | static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) | |
307 | { | |
308 | struct pl08x_phy_chan *ch; | |
e8689e63 LW |
309 | struct pl08x_txd *txd; |
310 | unsigned long flags; | |
cace6585 | 311 | size_t bytes = 0; |
e8689e63 LW |
312 | |
313 | spin_lock_irqsave(&plchan->lock, flags); | |
e8689e63 LW |
314 | ch = plchan->phychan; |
315 | txd = plchan->at; | |
316 | ||
317 | /* | |
db9f136a RKAL |
318 | * Follow the LLIs to get the number of remaining |
319 | * bytes in the currently active transaction. | |
e8689e63 LW |
320 | */ |
321 | if (ch && txd) { | |
4c0df6a3 | 322 | u32 clli = readl(ch->base + PL080_CH_LLI) & ~PL080_LLI_LM_AHB2; |
e8689e63 | 323 | |
db9f136a | 324 | /* First get the remaining bytes in the active transfer */ |
e8689e63 LW |
325 | bytes = get_bytes_in_cctl(readl(ch->base + PL080_CH_CONTROL)); |
326 | ||
327 | if (clli) { | |
db9f136a RKAL |
328 | struct pl08x_lli *llis_va = txd->llis_va; |
329 | dma_addr_t llis_bus = txd->llis_bus; | |
330 | int index; | |
331 | ||
332 | BUG_ON(clli < llis_bus || clli >= llis_bus + | |
333 | sizeof(struct pl08x_lli) * MAX_NUM_TSFR_LLIS); | |
e8689e63 | 334 | |
db9f136a RKAL |
335 | /* |
336 | * Locate the next LLI - as this is an array, | |
337 | * it's simple maths to find. | |
338 | */ | |
339 | index = (clli - llis_bus) / sizeof(struct pl08x_lli); | |
340 | ||
341 | for (; index < MAX_NUM_TSFR_LLIS; index++) { | |
342 | bytes += get_bytes_in_cctl(llis_va[index].cctl); | |
e8689e63 | 343 | |
e8689e63 | 344 | /* |
e8b5e11d | 345 | * A LLI pointer of 0 terminates the LLI list |
e8689e63 | 346 | */ |
db9f136a RKAL |
347 | if (!llis_va[index].lli) |
348 | break; | |
e8689e63 LW |
349 | } |
350 | } | |
351 | } | |
352 | ||
353 | /* Sum up all queued transactions */ | |
15c17232 | 354 | if (!list_empty(&plchan->pend_list)) { |
db9f136a | 355 | struct pl08x_txd *txdi; |
15c17232 | 356 | list_for_each_entry(txdi, &plchan->pend_list, node) { |
e8689e63 LW |
357 | bytes += txdi->len; |
358 | } | |
e8689e63 LW |
359 | } |
360 | ||
361 | spin_unlock_irqrestore(&plchan->lock, flags); | |
362 | ||
363 | return bytes; | |
364 | } | |
365 | ||
366 | /* | |
367 | * Allocate a physical channel for a virtual channel | |
94ae8522 RKAL |
368 | * |
369 | * Try to locate a physical channel to be used for this transfer. If all | |
370 | * are taken return NULL and the requester will have to cope by using | |
371 | * some fallback PIO mode or retrying later. | |
e8689e63 LW |
372 | */ |
373 | static struct pl08x_phy_chan * | |
374 | pl08x_get_phy_channel(struct pl08x_driver_data *pl08x, | |
375 | struct pl08x_dma_chan *virt_chan) | |
376 | { | |
377 | struct pl08x_phy_chan *ch = NULL; | |
378 | unsigned long flags; | |
379 | int i; | |
380 | ||
e8689e63 LW |
381 | for (i = 0; i < pl08x->vd->channels; i++) { |
382 | ch = &pl08x->phy_chans[i]; | |
383 | ||
384 | spin_lock_irqsave(&ch->lock, flags); | |
385 | ||
386 | if (!ch->serving) { | |
387 | ch->serving = virt_chan; | |
388 | ch->signal = -1; | |
389 | spin_unlock_irqrestore(&ch->lock, flags); | |
390 | break; | |
391 | } | |
392 | ||
393 | spin_unlock_irqrestore(&ch->lock, flags); | |
394 | } | |
395 | ||
396 | if (i == pl08x->vd->channels) { | |
397 | /* No physical channel available, cope with it */ | |
398 | return NULL; | |
399 | } | |
400 | ||
b7b6018b | 401 | pm_runtime_get_sync(&pl08x->adev->dev); |
e8689e63 LW |
402 | return ch; |
403 | } | |
404 | ||
405 | static inline void pl08x_put_phy_channel(struct pl08x_driver_data *pl08x, | |
406 | struct pl08x_phy_chan *ch) | |
407 | { | |
408 | unsigned long flags; | |
409 | ||
fb526210 RKAL |
410 | spin_lock_irqsave(&ch->lock, flags); |
411 | ||
e8689e63 | 412 | /* Stop the channel and clear its interrupts */ |
fb526210 | 413 | pl08x_terminate_phy_chan(pl08x, ch); |
e8689e63 | 414 | |
b7b6018b VK |
415 | pm_runtime_put(&pl08x->adev->dev); |
416 | ||
e8689e63 | 417 | /* Mark it as free */ |
e8689e63 LW |
418 | ch->serving = NULL; |
419 | spin_unlock_irqrestore(&ch->lock, flags); | |
420 | } | |
421 | ||
422 | /* | |
423 | * LLI handling | |
424 | */ | |
425 | ||
426 | static inline unsigned int pl08x_get_bytes_for_cctl(unsigned int coded) | |
427 | { | |
428 | switch (coded) { | |
429 | case PL080_WIDTH_8BIT: | |
430 | return 1; | |
431 | case PL080_WIDTH_16BIT: | |
432 | return 2; | |
433 | case PL080_WIDTH_32BIT: | |
434 | return 4; | |
435 | default: | |
436 | break; | |
437 | } | |
438 | BUG(); | |
439 | return 0; | |
440 | } | |
441 | ||
442 | static inline u32 pl08x_cctl_bits(u32 cctl, u8 srcwidth, u8 dstwidth, | |
cace6585 | 443 | size_t tsize) |
e8689e63 LW |
444 | { |
445 | u32 retbits = cctl; | |
446 | ||
e8b5e11d | 447 | /* Remove all src, dst and transfer size bits */ |
e8689e63 LW |
448 | retbits &= ~PL080_CONTROL_DWIDTH_MASK; |
449 | retbits &= ~PL080_CONTROL_SWIDTH_MASK; | |
450 | retbits &= ~PL080_CONTROL_TRANSFER_SIZE_MASK; | |
451 | ||
452 | /* Then set the bits according to the parameters */ | |
453 | switch (srcwidth) { | |
454 | case 1: | |
455 | retbits |= PL080_WIDTH_8BIT << PL080_CONTROL_SWIDTH_SHIFT; | |
456 | break; | |
457 | case 2: | |
458 | retbits |= PL080_WIDTH_16BIT << PL080_CONTROL_SWIDTH_SHIFT; | |
459 | break; | |
460 | case 4: | |
461 | retbits |= PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT; | |
462 | break; | |
463 | default: | |
464 | BUG(); | |
465 | break; | |
466 | } | |
467 | ||
468 | switch (dstwidth) { | |
469 | case 1: | |
470 | retbits |= PL080_WIDTH_8BIT << PL080_CONTROL_DWIDTH_SHIFT; | |
471 | break; | |
472 | case 2: | |
473 | retbits |= PL080_WIDTH_16BIT << PL080_CONTROL_DWIDTH_SHIFT; | |
474 | break; | |
475 | case 4: | |
476 | retbits |= PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT; | |
477 | break; | |
478 | default: | |
479 | BUG(); | |
480 | break; | |
481 | } | |
482 | ||
483 | retbits |= tsize << PL080_CONTROL_TRANSFER_SIZE_SHIFT; | |
484 | return retbits; | |
485 | } | |
486 | ||
542361f8 RKAL |
487 | struct pl08x_lli_build_data { |
488 | struct pl08x_txd *txd; | |
542361f8 RKAL |
489 | struct pl08x_bus_data srcbus; |
490 | struct pl08x_bus_data dstbus; | |
491 | size_t remainder; | |
25c94f7f | 492 | u32 lli_bus; |
542361f8 RKAL |
493 | }; |
494 | ||
e8689e63 | 495 | /* |
0532e6fc VK |
496 | * Autoselect a master bus to use for the transfer. Slave will be the chosen as |
497 | * victim in case src & dest are not similarly aligned. i.e. If after aligning | |
498 | * masters address with width requirements of transfer (by sending few byte by | |
499 | * byte data), slave is still not aligned, then its width will be reduced to | |
500 | * BYTE. | |
501 | * - prefers the destination bus if both available | |
502 | * - if fixed address on one bus the other will be chosen | |
e8689e63 | 503 | */ |
542361f8 RKAL |
504 | static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd, |
505 | struct pl08x_bus_data **mbus, struct pl08x_bus_data **sbus, u32 cctl) | |
e8689e63 LW |
506 | { |
507 | if (!(cctl & PL080_CONTROL_DST_INCR)) { | |
542361f8 RKAL |
508 | *mbus = &bd->srcbus; |
509 | *sbus = &bd->dstbus; | |
e8689e63 | 510 | } else if (!(cctl & PL080_CONTROL_SRC_INCR)) { |
542361f8 RKAL |
511 | *mbus = &bd->dstbus; |
512 | *sbus = &bd->srcbus; | |
e8689e63 | 513 | } else { |
542361f8 RKAL |
514 | if (bd->dstbus.buswidth == 4) { |
515 | *mbus = &bd->dstbus; | |
516 | *sbus = &bd->srcbus; | |
517 | } else if (bd->srcbus.buswidth == 4) { | |
518 | *mbus = &bd->srcbus; | |
519 | *sbus = &bd->dstbus; | |
520 | } else if (bd->dstbus.buswidth == 2) { | |
521 | *mbus = &bd->dstbus; | |
522 | *sbus = &bd->srcbus; | |
523 | } else if (bd->srcbus.buswidth == 2) { | |
524 | *mbus = &bd->srcbus; | |
525 | *sbus = &bd->dstbus; | |
e8689e63 | 526 | } else { |
542361f8 RKAL |
527 | /* bd->srcbus.buswidth == 1 */ |
528 | *mbus = &bd->dstbus; | |
529 | *sbus = &bd->srcbus; | |
e8689e63 LW |
530 | } |
531 | } | |
532 | } | |
533 | ||
534 | /* | |
94ae8522 | 535 | * Fills in one LLI for a certain transfer descriptor and advance the counter |
e8689e63 | 536 | */ |
542361f8 RKAL |
537 | static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd, |
538 | int num_llis, int len, u32 cctl) | |
e8689e63 | 539 | { |
542361f8 RKAL |
540 | struct pl08x_lli *llis_va = bd->txd->llis_va; |
541 | dma_addr_t llis_bus = bd->txd->llis_bus; | |
e8689e63 LW |
542 | |
543 | BUG_ON(num_llis >= MAX_NUM_TSFR_LLIS); | |
544 | ||
30749cb4 | 545 | llis_va[num_llis].cctl = cctl; |
542361f8 RKAL |
546 | llis_va[num_llis].src = bd->srcbus.addr; |
547 | llis_va[num_llis].dst = bd->dstbus.addr; | |
3e27ee84 VK |
548 | llis_va[num_llis].lli = llis_bus + (num_llis + 1) * |
549 | sizeof(struct pl08x_lli); | |
25c94f7f | 550 | llis_va[num_llis].lli |= bd->lli_bus; |
e8689e63 LW |
551 | |
552 | if (cctl & PL080_CONTROL_SRC_INCR) | |
542361f8 | 553 | bd->srcbus.addr += len; |
e8689e63 | 554 | if (cctl & PL080_CONTROL_DST_INCR) |
542361f8 | 555 | bd->dstbus.addr += len; |
e8689e63 | 556 | |
542361f8 | 557 | BUG_ON(bd->remainder < len); |
cace6585 | 558 | |
542361f8 | 559 | bd->remainder -= len; |
e8689e63 LW |
560 | } |
561 | ||
e8689e63 LW |
562 | /* |
563 | * This fills in the table of LLIs for the transfer descriptor | |
564 | * Note that we assume we never have to change the burst sizes | |
565 | * Return 0 for error | |
566 | */ | |
567 | static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, | |
568 | struct pl08x_txd *txd) | |
569 | { | |
e8689e63 | 570 | struct pl08x_bus_data *mbus, *sbus; |
542361f8 | 571 | struct pl08x_lli_build_data bd; |
e8689e63 LW |
572 | int num_llis = 0; |
573 | u32 cctl; | |
3e27ee84 | 574 | size_t max_bytes_per_lli, total_bytes = 0; |
7cb72ad9 | 575 | struct pl08x_lli *llis_va; |
e8689e63 | 576 | |
3e27ee84 | 577 | txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, &txd->llis_bus); |
e8689e63 LW |
578 | if (!txd->llis_va) { |
579 | dev_err(&pl08x->adev->dev, "%s no memory for llis\n", __func__); | |
580 | return 0; | |
581 | } | |
582 | ||
583 | pl08x->pool_ctr++; | |
584 | ||
70b5ed6b RKAL |
585 | /* Get the default CCTL */ |
586 | cctl = txd->cctl; | |
e8689e63 | 587 | |
542361f8 | 588 | bd.txd = txd; |
d7244e9a RKAL |
589 | bd.srcbus.addr = txd->src_addr; |
590 | bd.dstbus.addr = txd->dst_addr; | |
25c94f7f | 591 | bd.lli_bus = (pl08x->lli_buses & PL08X_AHB2) ? PL080_LLI_LM_AHB2 : 0; |
542361f8 | 592 | |
e8689e63 | 593 | /* Find maximum width of the source bus */ |
542361f8 | 594 | bd.srcbus.maxwidth = |
e8689e63 LW |
595 | pl08x_get_bytes_for_cctl((cctl & PL080_CONTROL_SWIDTH_MASK) >> |
596 | PL080_CONTROL_SWIDTH_SHIFT); | |
597 | ||
598 | /* Find maximum width of the destination bus */ | |
542361f8 | 599 | bd.dstbus.maxwidth = |
e8689e63 LW |
600 | pl08x_get_bytes_for_cctl((cctl & PL080_CONTROL_DWIDTH_MASK) >> |
601 | PL080_CONTROL_DWIDTH_SHIFT); | |
602 | ||
603 | /* Set up the bus widths to the maximum */ | |
542361f8 RKAL |
604 | bd.srcbus.buswidth = bd.srcbus.maxwidth; |
605 | bd.dstbus.buswidth = bd.dstbus.maxwidth; | |
e8689e63 LW |
606 | |
607 | /* | |
608 | * Bytes transferred == tsize * MIN(buswidths), not max(buswidths) | |
609 | */ | |
542361f8 | 610 | max_bytes_per_lli = min(bd.srcbus.buswidth, bd.dstbus.buswidth) * |
e8689e63 | 611 | PL080_CONTROL_TRANSFER_SIZE_MASK; |
e8689e63 LW |
612 | |
613 | /* We need to count this down to zero */ | |
542361f8 | 614 | bd.remainder = txd->len; |
e8689e63 | 615 | |
542361f8 | 616 | pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl); |
e8689e63 | 617 | |
fc74eb79 RKAL |
618 | dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu llimax=%zu\n", |
619 | bd.srcbus.addr, cctl & PL080_CONTROL_SRC_INCR ? "+" : "", | |
620 | bd.srcbus.buswidth, | |
621 | bd.dstbus.addr, cctl & PL080_CONTROL_DST_INCR ? "+" : "", | |
622 | bd.dstbus.buswidth, | |
623 | bd.remainder, max_bytes_per_lli); | |
624 | dev_vdbg(&pl08x->adev->dev, "mbus=%s sbus=%s\n", | |
625 | mbus == &bd.srcbus ? "src" : "dst", | |
626 | sbus == &bd.srcbus ? "src" : "dst"); | |
627 | ||
e8689e63 | 628 | if (txd->len < mbus->buswidth) { |
94ae8522 | 629 | /* Less than a bus width available - send as single bytes */ |
542361f8 | 630 | while (bd.remainder) { |
e8689e63 LW |
631 | dev_vdbg(&pl08x->adev->dev, |
632 | "%s single byte LLIs for a transfer of " | |
9c132992 | 633 | "less than a bus width (remain 0x%08x)\n", |
542361f8 | 634 | __func__, bd.remainder); |
e8689e63 | 635 | cctl = pl08x_cctl_bits(cctl, 1, 1, 1); |
542361f8 | 636 | pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl); |
e8689e63 LW |
637 | total_bytes++; |
638 | } | |
639 | } else { | |
94ae8522 | 640 | /* Make one byte LLIs until master bus is aligned */ |
e8689e63 LW |
641 | while ((mbus->addr) % (mbus->buswidth)) { |
642 | dev_vdbg(&pl08x->adev->dev, | |
643 | "%s adjustment lli for less than bus width " | |
9c132992 | 644 | "(remain 0x%08x)\n", |
542361f8 | 645 | __func__, bd.remainder); |
e8689e63 | 646 | cctl = pl08x_cctl_bits(cctl, 1, 1, 1); |
542361f8 | 647 | pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl); |
e8689e63 LW |
648 | total_bytes++; |
649 | } | |
650 | ||
651 | /* | |
94ae8522 | 652 | * Master now aligned |
e8689e63 LW |
653 | * - if slave is not then we must set its width down |
654 | */ | |
655 | if (sbus->addr % sbus->buswidth) { | |
656 | dev_dbg(&pl08x->adev->dev, | |
657 | "%s set down bus width to one byte\n", | |
658 | __func__); | |
659 | ||
660 | sbus->buswidth = 1; | |
661 | } | |
662 | ||
663 | /* | |
664 | * Make largest possible LLIs until less than one bus | |
665 | * width left | |
666 | */ | |
542361f8 | 667 | while (bd.remainder > (mbus->buswidth - 1)) { |
16a2e7d3 | 668 | size_t lli_len, tsize; |
e8689e63 LW |
669 | |
670 | /* | |
671 | * If enough left try to send max possible, | |
672 | * otherwise try to send the remainder | |
673 | */ | |
16a2e7d3 | 674 | lli_len = min(bd.remainder, max_bytes_per_lli); |
e8689e63 | 675 | /* |
16a2e7d3 VK |
676 | * Check against minimum bus alignment: Calculate actual |
677 | * transfer size in relation to bus width and get a | |
678 | * maximum remainder of the smallest bus width - 1 | |
e8689e63 | 679 | */ |
16a2e7d3 VK |
680 | tsize = lli_len / min(mbus->buswidth, sbus->buswidth); |
681 | lli_len = tsize * min(mbus->buswidth, sbus->buswidth); | |
e8689e63 | 682 | |
16a2e7d3 VK |
683 | dev_vdbg(&pl08x->adev->dev, |
684 | "%s fill lli with single lli chunk of " | |
685 | "size 0x%08zx (remainder 0x%08zx)\n", | |
686 | __func__, lli_len, bd.remainder); | |
687 | ||
688 | cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth, | |
689 | bd.dstbus.buswidth, tsize); | |
690 | pl08x_fill_lli_for_desc(&bd, num_llis++, lli_len, cctl); | |
691 | total_bytes += lli_len; | |
e8689e63 LW |
692 | } |
693 | ||
694 | /* | |
695 | * Send any odd bytes | |
696 | */ | |
542361f8 | 697 | while (bd.remainder) { |
e8689e63 LW |
698 | cctl = pl08x_cctl_bits(cctl, 1, 1, 1); |
699 | dev_vdbg(&pl08x->adev->dev, | |
cace6585 | 700 | "%s align with boundary, single odd byte (remain %zu)\n", |
542361f8 RKAL |
701 | __func__, bd.remainder); |
702 | pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl); | |
e8689e63 LW |
703 | total_bytes++; |
704 | } | |
705 | } | |
16a2e7d3 | 706 | |
e8689e63 LW |
707 | if (total_bytes != txd->len) { |
708 | dev_err(&pl08x->adev->dev, | |
cace6585 | 709 | "%s size of encoded lli:s don't match total txd, transferred 0x%08zx from size 0x%08zx\n", |
e8689e63 LW |
710 | __func__, total_bytes, txd->len); |
711 | return 0; | |
712 | } | |
713 | ||
714 | if (num_llis >= MAX_NUM_TSFR_LLIS) { | |
715 | dev_err(&pl08x->adev->dev, | |
716 | "%s need to increase MAX_NUM_TSFR_LLIS from 0x%08x\n", | |
717 | __func__, (u32) MAX_NUM_TSFR_LLIS); | |
718 | return 0; | |
719 | } | |
b58b6b5b RKAL |
720 | |
721 | llis_va = txd->llis_va; | |
94ae8522 | 722 | /* The final LLI terminates the LLI. */ |
bfddfb45 | 723 | llis_va[num_llis - 1].lli = 0; |
94ae8522 | 724 | /* The final LLI element shall also fire an interrupt. */ |
b58b6b5b | 725 | llis_va[num_llis - 1].cctl |= PL080_CONTROL_TC_IRQ_EN; |
e8689e63 | 726 | |
e8689e63 LW |
727 | #ifdef VERBOSE_DEBUG |
728 | { | |
729 | int i; | |
730 | ||
fc74eb79 RKAL |
731 | dev_vdbg(&pl08x->adev->dev, |
732 | "%-3s %-9s %-10s %-10s %-10s %s\n", | |
733 | "lli", "", "csrc", "cdst", "clli", "cctl"); | |
e8689e63 LW |
734 | for (i = 0; i < num_llis; i++) { |
735 | dev_vdbg(&pl08x->adev->dev, | |
fc74eb79 RKAL |
736 | "%3d @%p: 0x%08x 0x%08x 0x%08x 0x%08x\n", |
737 | i, &llis_va[i], llis_va[i].src, | |
738 | llis_va[i].dst, llis_va[i].lli, llis_va[i].cctl | |
e8689e63 LW |
739 | ); |
740 | } | |
741 | } | |
742 | #endif | |
743 | ||
744 | return num_llis; | |
745 | } | |
746 | ||
747 | /* You should call this with the struct pl08x lock held */ | |
748 | static void pl08x_free_txd(struct pl08x_driver_data *pl08x, | |
749 | struct pl08x_txd *txd) | |
750 | { | |
e8689e63 | 751 | /* Free the LLI */ |
56b61882 | 752 | dma_pool_free(pl08x->pool, txd->llis_va, txd->llis_bus); |
e8689e63 LW |
753 | |
754 | pl08x->pool_ctr--; | |
755 | ||
756 | kfree(txd); | |
757 | } | |
758 | ||
759 | static void pl08x_free_txd_list(struct pl08x_driver_data *pl08x, | |
760 | struct pl08x_dma_chan *plchan) | |
761 | { | |
762 | struct pl08x_txd *txdi = NULL; | |
763 | struct pl08x_txd *next; | |
764 | ||
15c17232 | 765 | if (!list_empty(&plchan->pend_list)) { |
e8689e63 | 766 | list_for_each_entry_safe(txdi, |
15c17232 | 767 | next, &plchan->pend_list, node) { |
e8689e63 LW |
768 | list_del(&txdi->node); |
769 | pl08x_free_txd(pl08x, txdi); | |
770 | } | |
e8689e63 LW |
771 | } |
772 | } | |
773 | ||
774 | /* | |
775 | * The DMA ENGINE API | |
776 | */ | |
777 | static int pl08x_alloc_chan_resources(struct dma_chan *chan) | |
778 | { | |
779 | return 0; | |
780 | } | |
781 | ||
782 | static void pl08x_free_chan_resources(struct dma_chan *chan) | |
783 | { | |
784 | } | |
785 | ||
786 | /* | |
787 | * This should be called with the channel plchan->lock held | |
788 | */ | |
789 | static int prep_phy_channel(struct pl08x_dma_chan *plchan, | |
790 | struct pl08x_txd *txd) | |
791 | { | |
792 | struct pl08x_driver_data *pl08x = plchan->host; | |
793 | struct pl08x_phy_chan *ch; | |
794 | int ret; | |
795 | ||
796 | /* Check if we already have a channel */ | |
797 | if (plchan->phychan) | |
798 | return 0; | |
799 | ||
800 | ch = pl08x_get_phy_channel(pl08x, plchan); | |
801 | if (!ch) { | |
802 | /* No physical channel available, cope with it */ | |
803 | dev_dbg(&pl08x->adev->dev, "no physical channel available for xfer on %s\n", plchan->name); | |
804 | return -EBUSY; | |
805 | } | |
806 | ||
807 | /* | |
808 | * OK we have a physical channel: for memcpy() this is all we | |
809 | * need, but for slaves the physical signals may be muxed! | |
810 | * Can the platform allow us to use this channel? | |
811 | */ | |
16ca8105 | 812 | if (plchan->slave && pl08x->pd->get_signal) { |
e8689e63 LW |
813 | ret = pl08x->pd->get_signal(plchan); |
814 | if (ret < 0) { | |
815 | dev_dbg(&pl08x->adev->dev, | |
816 | "unable to use physical channel %d for transfer on %s due to platform restrictions\n", | |
817 | ch->id, plchan->name); | |
818 | /* Release physical channel & return */ | |
819 | pl08x_put_phy_channel(pl08x, ch); | |
820 | return -EBUSY; | |
821 | } | |
822 | ch->signal = ret; | |
09b3c323 RKAL |
823 | |
824 | /* Assign the flow control signal to this channel */ | |
825 | if (txd->direction == DMA_TO_DEVICE) | |
826 | txd->ccfg |= ch->signal << PL080_CONFIG_DST_SEL_SHIFT; | |
827 | else if (txd->direction == DMA_FROM_DEVICE) | |
828 | txd->ccfg |= ch->signal << PL080_CONFIG_SRC_SEL_SHIFT; | |
e8689e63 LW |
829 | } |
830 | ||
831 | dev_dbg(&pl08x->adev->dev, "allocated physical channel %d and signal %d for xfer on %s\n", | |
832 | ch->id, | |
833 | ch->signal, | |
834 | plchan->name); | |
835 | ||
8087aacd | 836 | plchan->phychan_hold++; |
e8689e63 LW |
837 | plchan->phychan = ch; |
838 | ||
839 | return 0; | |
840 | } | |
841 | ||
8c8cc2b1 RKAL |
842 | static void release_phy_channel(struct pl08x_dma_chan *plchan) |
843 | { | |
844 | struct pl08x_driver_data *pl08x = plchan->host; | |
845 | ||
846 | if ((plchan->phychan->signal >= 0) && pl08x->pd->put_signal) { | |
847 | pl08x->pd->put_signal(plchan); | |
848 | plchan->phychan->signal = -1; | |
849 | } | |
850 | pl08x_put_phy_channel(pl08x, plchan->phychan); | |
851 | plchan->phychan = NULL; | |
852 | } | |
853 | ||
e8689e63 LW |
854 | static dma_cookie_t pl08x_tx_submit(struct dma_async_tx_descriptor *tx) |
855 | { | |
856 | struct pl08x_dma_chan *plchan = to_pl08x_chan(tx->chan); | |
501e67e8 | 857 | struct pl08x_txd *txd = to_pl08x_txd(tx); |
c370e594 RKAL |
858 | unsigned long flags; |
859 | ||
860 | spin_lock_irqsave(&plchan->lock, flags); | |
e8689e63 | 861 | |
91aa5fad RKAL |
862 | plchan->chan.cookie += 1; |
863 | if (plchan->chan.cookie < 0) | |
864 | plchan->chan.cookie = 1; | |
865 | tx->cookie = plchan->chan.cookie; | |
501e67e8 RKAL |
866 | |
867 | /* Put this onto the pending list */ | |
868 | list_add_tail(&txd->node, &plchan->pend_list); | |
869 | ||
870 | /* | |
871 | * If there was no physical channel available for this memcpy, | |
872 | * stack the request up and indicate that the channel is waiting | |
873 | * for a free physical channel. | |
874 | */ | |
875 | if (!plchan->slave && !plchan->phychan) { | |
876 | /* Do this memcpy whenever there is a channel ready */ | |
877 | plchan->state = PL08X_CHAN_WAITING; | |
878 | plchan->waiting = txd; | |
8087aacd RKAL |
879 | } else { |
880 | plchan->phychan_hold--; | |
501e67e8 RKAL |
881 | } |
882 | ||
c370e594 | 883 | spin_unlock_irqrestore(&plchan->lock, flags); |
e8689e63 LW |
884 | |
885 | return tx->cookie; | |
886 | } | |
887 | ||
888 | static struct dma_async_tx_descriptor *pl08x_prep_dma_interrupt( | |
889 | struct dma_chan *chan, unsigned long flags) | |
890 | { | |
891 | struct dma_async_tx_descriptor *retval = NULL; | |
892 | ||
893 | return retval; | |
894 | } | |
895 | ||
896 | /* | |
94ae8522 RKAL |
897 | * Code accessing dma_async_is_complete() in a tight loop may give problems. |
898 | * If slaves are relying on interrupts to signal completion this function | |
899 | * must not be called with interrupts disabled. | |
e8689e63 | 900 | */ |
3e27ee84 VK |
901 | static enum dma_status pl08x_dma_tx_status(struct dma_chan *chan, |
902 | dma_cookie_t cookie, struct dma_tx_state *txstate) | |
e8689e63 LW |
903 | { |
904 | struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); | |
905 | dma_cookie_t last_used; | |
906 | dma_cookie_t last_complete; | |
907 | enum dma_status ret; | |
908 | u32 bytesleft = 0; | |
909 | ||
91aa5fad | 910 | last_used = plchan->chan.cookie; |
e8689e63 LW |
911 | last_complete = plchan->lc; |
912 | ||
913 | ret = dma_async_is_complete(cookie, last_complete, last_used); | |
914 | if (ret == DMA_SUCCESS) { | |
915 | dma_set_tx_state(txstate, last_complete, last_used, 0); | |
916 | return ret; | |
917 | } | |
918 | ||
e8689e63 LW |
919 | /* |
920 | * This cookie not complete yet | |
921 | */ | |
91aa5fad | 922 | last_used = plchan->chan.cookie; |
e8689e63 LW |
923 | last_complete = plchan->lc; |
924 | ||
925 | /* Get number of bytes left in the active transactions and queue */ | |
926 | bytesleft = pl08x_getbytes_chan(plchan); | |
927 | ||
928 | dma_set_tx_state(txstate, last_complete, last_used, | |
929 | bytesleft); | |
930 | ||
931 | if (plchan->state == PL08X_CHAN_PAUSED) | |
932 | return DMA_PAUSED; | |
933 | ||
934 | /* Whether waiting or running, we're in progress */ | |
935 | return DMA_IN_PROGRESS; | |
936 | } | |
937 | ||
938 | /* PrimeCell DMA extension */ | |
939 | struct burst_table { | |
760596c6 | 940 | u32 burstwords; |
e8689e63 LW |
941 | u32 reg; |
942 | }; | |
943 | ||
944 | static const struct burst_table burst_sizes[] = { | |
945 | { | |
946 | .burstwords = 256, | |
760596c6 | 947 | .reg = PL080_BSIZE_256, |
e8689e63 LW |
948 | }, |
949 | { | |
950 | .burstwords = 128, | |
760596c6 | 951 | .reg = PL080_BSIZE_128, |
e8689e63 LW |
952 | }, |
953 | { | |
954 | .burstwords = 64, | |
760596c6 | 955 | .reg = PL080_BSIZE_64, |
e8689e63 LW |
956 | }, |
957 | { | |
958 | .burstwords = 32, | |
760596c6 | 959 | .reg = PL080_BSIZE_32, |
e8689e63 LW |
960 | }, |
961 | { | |
962 | .burstwords = 16, | |
760596c6 | 963 | .reg = PL080_BSIZE_16, |
e8689e63 LW |
964 | }, |
965 | { | |
966 | .burstwords = 8, | |
760596c6 | 967 | .reg = PL080_BSIZE_8, |
e8689e63 LW |
968 | }, |
969 | { | |
970 | .burstwords = 4, | |
760596c6 | 971 | .reg = PL080_BSIZE_4, |
e8689e63 LW |
972 | }, |
973 | { | |
760596c6 RKAL |
974 | .burstwords = 0, |
975 | .reg = PL080_BSIZE_1, | |
e8689e63 LW |
976 | }, |
977 | }; | |
978 | ||
121c8476 RKAL |
979 | /* |
980 | * Given the source and destination available bus masks, select which | |
981 | * will be routed to each port. We try to have source and destination | |
982 | * on separate ports, but always respect the allowable settings. | |
983 | */ | |
984 | static u32 pl08x_select_bus(u8 src, u8 dst) | |
985 | { | |
986 | u32 cctl = 0; | |
987 | ||
988 | if (!(dst & PL08X_AHB1) || ((dst & PL08X_AHB2) && (src & PL08X_AHB1))) | |
989 | cctl |= PL080_CONTROL_DST_AHB2; | |
990 | if (!(src & PL08X_AHB1) || ((src & PL08X_AHB2) && !(dst & PL08X_AHB2))) | |
991 | cctl |= PL080_CONTROL_SRC_AHB2; | |
992 | ||
993 | return cctl; | |
994 | } | |
995 | ||
f14c426c RKAL |
996 | static u32 pl08x_cctl(u32 cctl) |
997 | { | |
998 | cctl &= ~(PL080_CONTROL_SRC_AHB2 | PL080_CONTROL_DST_AHB2 | | |
999 | PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR | | |
1000 | PL080_CONTROL_PROT_MASK); | |
1001 | ||
1002 | /* Access the cell in privileged mode, non-bufferable, non-cacheable */ | |
1003 | return cctl | PL080_CONTROL_PROT_SYS; | |
1004 | } | |
1005 | ||
aa88cdaa RKAL |
1006 | static u32 pl08x_width(enum dma_slave_buswidth width) |
1007 | { | |
1008 | switch (width) { | |
1009 | case DMA_SLAVE_BUSWIDTH_1_BYTE: | |
1010 | return PL080_WIDTH_8BIT; | |
1011 | case DMA_SLAVE_BUSWIDTH_2_BYTES: | |
1012 | return PL080_WIDTH_16BIT; | |
1013 | case DMA_SLAVE_BUSWIDTH_4_BYTES: | |
1014 | return PL080_WIDTH_32BIT; | |
f32807f1 VK |
1015 | default: |
1016 | return ~0; | |
aa88cdaa | 1017 | } |
aa88cdaa RKAL |
1018 | } |
1019 | ||
760596c6 RKAL |
1020 | static u32 pl08x_burst(u32 maxburst) |
1021 | { | |
1022 | int i; | |
1023 | ||
1024 | for (i = 0; i < ARRAY_SIZE(burst_sizes); i++) | |
1025 | if (burst_sizes[i].burstwords <= maxburst) | |
1026 | break; | |
1027 | ||
1028 | return burst_sizes[i].reg; | |
1029 | } | |
1030 | ||
f0fd9446 RKAL |
1031 | static int dma_set_runtime_config(struct dma_chan *chan, |
1032 | struct dma_slave_config *config) | |
e8689e63 LW |
1033 | { |
1034 | struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); | |
1035 | struct pl08x_driver_data *pl08x = plchan->host; | |
e8689e63 | 1036 | enum dma_slave_buswidth addr_width; |
760596c6 | 1037 | u32 width, burst, maxburst; |
e8689e63 | 1038 | u32 cctl = 0; |
b7f75865 RKAL |
1039 | |
1040 | if (!plchan->slave) | |
1041 | return -EINVAL; | |
e8689e63 LW |
1042 | |
1043 | /* Transfer direction */ | |
1044 | plchan->runtime_direction = config->direction; | |
1045 | if (config->direction == DMA_TO_DEVICE) { | |
e8689e63 LW |
1046 | addr_width = config->dst_addr_width; |
1047 | maxburst = config->dst_maxburst; | |
1048 | } else if (config->direction == DMA_FROM_DEVICE) { | |
e8689e63 LW |
1049 | addr_width = config->src_addr_width; |
1050 | maxburst = config->src_maxburst; | |
1051 | } else { | |
1052 | dev_err(&pl08x->adev->dev, | |
1053 | "bad runtime_config: alien transfer direction\n"); | |
f0fd9446 | 1054 | return -EINVAL; |
e8689e63 LW |
1055 | } |
1056 | ||
aa88cdaa RKAL |
1057 | width = pl08x_width(addr_width); |
1058 | if (width == ~0) { | |
e8689e63 LW |
1059 | dev_err(&pl08x->adev->dev, |
1060 | "bad runtime_config: alien address width\n"); | |
f0fd9446 | 1061 | return -EINVAL; |
e8689e63 LW |
1062 | } |
1063 | ||
aa88cdaa RKAL |
1064 | cctl |= width << PL080_CONTROL_SWIDTH_SHIFT; |
1065 | cctl |= width << PL080_CONTROL_DWIDTH_SHIFT; | |
1066 | ||
e8689e63 | 1067 | /* |
4440aacf RKAL |
1068 | * If this channel will only request single transfers, set this |
1069 | * down to ONE element. Also select one element if no maxburst | |
1070 | * is specified. | |
e8689e63 | 1071 | */ |
760596c6 RKAL |
1072 | if (plchan->cd->single) |
1073 | maxburst = 1; | |
1074 | ||
1075 | burst = pl08x_burst(maxburst); | |
1076 | cctl |= burst << PL080_CONTROL_SB_SIZE_SHIFT; | |
1077 | cctl |= burst << PL080_CONTROL_DB_SIZE_SHIFT; | |
e8689e63 | 1078 | |
b207b4d0 RKAL |
1079 | if (plchan->runtime_direction == DMA_FROM_DEVICE) { |
1080 | plchan->src_addr = config->src_addr; | |
121c8476 RKAL |
1081 | plchan->src_cctl = pl08x_cctl(cctl) | PL080_CONTROL_DST_INCR | |
1082 | pl08x_select_bus(plchan->cd->periph_buses, | |
1083 | pl08x->mem_buses); | |
b207b4d0 RKAL |
1084 | } else { |
1085 | plchan->dst_addr = config->dst_addr; | |
121c8476 RKAL |
1086 | plchan->dst_cctl = pl08x_cctl(cctl) | PL080_CONTROL_SRC_INCR | |
1087 | pl08x_select_bus(pl08x->mem_buses, | |
1088 | plchan->cd->periph_buses); | |
b207b4d0 | 1089 | } |
f0fd9446 | 1090 | |
e8689e63 LW |
1091 | dev_dbg(&pl08x->adev->dev, |
1092 | "configured channel %s (%s) for %s, data width %d, " | |
4983a04f | 1093 | "maxburst %d words, LE, CCTL=0x%08x\n", |
e8689e63 LW |
1094 | dma_chan_name(chan), plchan->name, |
1095 | (config->direction == DMA_FROM_DEVICE) ? "RX" : "TX", | |
1096 | addr_width, | |
1097 | maxburst, | |
4983a04f | 1098 | cctl); |
f0fd9446 RKAL |
1099 | |
1100 | return 0; | |
e8689e63 LW |
1101 | } |
1102 | ||
1103 | /* | |
1104 | * Slave transactions callback to the slave device to allow | |
1105 | * synchronization of slave DMA signals with the DMAC enable | |
1106 | */ | |
1107 | static void pl08x_issue_pending(struct dma_chan *chan) | |
1108 | { | |
1109 | struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); | |
e8689e63 LW |
1110 | unsigned long flags; |
1111 | ||
1112 | spin_lock_irqsave(&plchan->lock, flags); | |
9c0bb43b RKAL |
1113 | /* Something is already active, or we're waiting for a channel... */ |
1114 | if (plchan->at || plchan->state == PL08X_CHAN_WAITING) { | |
1115 | spin_unlock_irqrestore(&plchan->lock, flags); | |
e8689e63 | 1116 | return; |
9c0bb43b | 1117 | } |
e8689e63 LW |
1118 | |
1119 | /* Take the first element in the queue and execute it */ | |
15c17232 | 1120 | if (!list_empty(&plchan->pend_list)) { |
e8689e63 LW |
1121 | struct pl08x_txd *next; |
1122 | ||
15c17232 | 1123 | next = list_first_entry(&plchan->pend_list, |
e8689e63 LW |
1124 | struct pl08x_txd, |
1125 | node); | |
1126 | list_del(&next->node); | |
e8689e63 LW |
1127 | plchan->state = PL08X_CHAN_RUNNING; |
1128 | ||
c885bee4 | 1129 | pl08x_start_txd(plchan, next); |
e8689e63 LW |
1130 | } |
1131 | ||
1132 | spin_unlock_irqrestore(&plchan->lock, flags); | |
1133 | } | |
1134 | ||
1135 | static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, | |
1136 | struct pl08x_txd *txd) | |
1137 | { | |
e8689e63 | 1138 | struct pl08x_driver_data *pl08x = plchan->host; |
c370e594 RKAL |
1139 | unsigned long flags; |
1140 | int num_llis, ret; | |
e8689e63 LW |
1141 | |
1142 | num_llis = pl08x_fill_llis_for_desc(pl08x, txd); | |
dafa7317 RKAL |
1143 | if (!num_llis) { |
1144 | kfree(txd); | |
e8689e63 | 1145 | return -EINVAL; |
dafa7317 | 1146 | } |
e8689e63 | 1147 | |
c370e594 | 1148 | spin_lock_irqsave(&plchan->lock, flags); |
e8689e63 | 1149 | |
e8689e63 LW |
1150 | /* |
1151 | * See if we already have a physical channel allocated, | |
1152 | * else this is the time to try to get one. | |
1153 | */ | |
1154 | ret = prep_phy_channel(plchan, txd); | |
1155 | if (ret) { | |
1156 | /* | |
501e67e8 RKAL |
1157 | * No physical channel was available. |
1158 | * | |
1159 | * memcpy transfers can be sorted out at submission time. | |
1160 | * | |
1161 | * Slave transfers may have been denied due to platform | |
1162 | * channel muxing restrictions. Since there is no guarantee | |
1163 | * that this will ever be resolved, and the signal must be | |
1164 | * acquired AFTER acquiring the physical channel, we will let | |
1165 | * them be NACK:ed with -EBUSY here. The drivers can retry | |
1166 | * the prep() call if they are eager on doing this using DMA. | |
e8689e63 LW |
1167 | */ |
1168 | if (plchan->slave) { | |
1169 | pl08x_free_txd_list(pl08x, plchan); | |
501e67e8 | 1170 | pl08x_free_txd(pl08x, txd); |
c370e594 | 1171 | spin_unlock_irqrestore(&plchan->lock, flags); |
e8689e63 LW |
1172 | return -EBUSY; |
1173 | } | |
e8689e63 LW |
1174 | } else |
1175 | /* | |
94ae8522 RKAL |
1176 | * Else we're all set, paused and ready to roll, status |
1177 | * will switch to PL08X_CHAN_RUNNING when we call | |
1178 | * issue_pending(). If there is something running on the | |
1179 | * channel already we don't change its state. | |
e8689e63 LW |
1180 | */ |
1181 | if (plchan->state == PL08X_CHAN_IDLE) | |
1182 | plchan->state = PL08X_CHAN_PAUSED; | |
1183 | ||
c370e594 | 1184 | spin_unlock_irqrestore(&plchan->lock, flags); |
e8689e63 LW |
1185 | |
1186 | return 0; | |
1187 | } | |
1188 | ||
c0428794 RKAL |
1189 | static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan, |
1190 | unsigned long flags) | |
ac3cd20d | 1191 | { |
b201c111 | 1192 | struct pl08x_txd *txd = kzalloc(sizeof(*txd), GFP_NOWAIT); |
ac3cd20d RKAL |
1193 | |
1194 | if (txd) { | |
1195 | dma_async_tx_descriptor_init(&txd->tx, &plchan->chan); | |
c0428794 | 1196 | txd->tx.flags = flags; |
ac3cd20d RKAL |
1197 | txd->tx.tx_submit = pl08x_tx_submit; |
1198 | INIT_LIST_HEAD(&txd->node); | |
4983a04f RKAL |
1199 | |
1200 | /* Always enable error and terminal interrupts */ | |
1201 | txd->ccfg = PL080_CONFIG_ERR_IRQ_MASK | | |
1202 | PL080_CONFIG_TC_IRQ_MASK; | |
ac3cd20d RKAL |
1203 | } |
1204 | return txd; | |
1205 | } | |
1206 | ||
e8689e63 LW |
1207 | /* |
1208 | * Initialize a descriptor to be used by memcpy submit | |
1209 | */ | |
1210 | static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( | |
1211 | struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, | |
1212 | size_t len, unsigned long flags) | |
1213 | { | |
1214 | struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); | |
1215 | struct pl08x_driver_data *pl08x = plchan->host; | |
1216 | struct pl08x_txd *txd; | |
1217 | int ret; | |
1218 | ||
c0428794 | 1219 | txd = pl08x_get_txd(plchan, flags); |
e8689e63 LW |
1220 | if (!txd) { |
1221 | dev_err(&pl08x->adev->dev, | |
1222 | "%s no memory for descriptor\n", __func__); | |
1223 | return NULL; | |
1224 | } | |
1225 | ||
e8689e63 | 1226 | txd->direction = DMA_NONE; |
d7244e9a RKAL |
1227 | txd->src_addr = src; |
1228 | txd->dst_addr = dest; | |
c7da9a56 | 1229 | txd->len = len; |
e8689e63 LW |
1230 | |
1231 | /* Set platform data for m2m */ | |
4983a04f | 1232 | txd->ccfg |= PL080_FLOW_MEM2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; |
c7da9a56 RKAL |
1233 | txd->cctl = pl08x->pd->memcpy_channel.cctl & |
1234 | ~(PL080_CONTROL_DST_AHB2 | PL080_CONTROL_SRC_AHB2); | |
4983a04f | 1235 | |
e8689e63 | 1236 | /* Both to be incremented or the code will break */ |
70b5ed6b | 1237 | txd->cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR; |
c7da9a56 | 1238 | |
c7da9a56 | 1239 | if (pl08x->vd->dualmaster) |
121c8476 RKAL |
1240 | txd->cctl |= pl08x_select_bus(pl08x->mem_buses, |
1241 | pl08x->mem_buses); | |
e8689e63 | 1242 | |
e8689e63 LW |
1243 | ret = pl08x_prep_channel_resources(plchan, txd); |
1244 | if (ret) | |
1245 | return NULL; | |
e8689e63 LW |
1246 | |
1247 | return &txd->tx; | |
1248 | } | |
1249 | ||
3e2a037c | 1250 | static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( |
e8689e63 LW |
1251 | struct dma_chan *chan, struct scatterlist *sgl, |
1252 | unsigned int sg_len, enum dma_data_direction direction, | |
1253 | unsigned long flags) | |
1254 | { | |
1255 | struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); | |
1256 | struct pl08x_driver_data *pl08x = plchan->host; | |
1257 | struct pl08x_txd *txd; | |
1258 | int ret; | |
1259 | ||
1260 | /* | |
1261 | * Current implementation ASSUMES only one sg | |
1262 | */ | |
1263 | if (sg_len != 1) { | |
1264 | dev_err(&pl08x->adev->dev, "%s prepared too long sglist\n", | |
1265 | __func__); | |
1266 | BUG(); | |
1267 | } | |
1268 | ||
1269 | dev_dbg(&pl08x->adev->dev, "%s prepare transaction of %d bytes from %s\n", | |
1270 | __func__, sgl->length, plchan->name); | |
1271 | ||
c0428794 | 1272 | txd = pl08x_get_txd(plchan, flags); |
e8689e63 LW |
1273 | if (!txd) { |
1274 | dev_err(&pl08x->adev->dev, "%s no txd\n", __func__); | |
1275 | return NULL; | |
1276 | } | |
1277 | ||
e8689e63 LW |
1278 | if (direction != plchan->runtime_direction) |
1279 | dev_err(&pl08x->adev->dev, "%s DMA setup does not match " | |
1280 | "the direction configured for the PrimeCell\n", | |
1281 | __func__); | |
1282 | ||
1283 | /* | |
1284 | * Set up addresses, the PrimeCell configured address | |
1285 | * will take precedence since this may configure the | |
1286 | * channel target address dynamically at runtime. | |
1287 | */ | |
1288 | txd->direction = direction; | |
c7da9a56 RKAL |
1289 | txd->len = sgl->length; |
1290 | ||
e8689e63 | 1291 | if (direction == DMA_TO_DEVICE) { |
4983a04f | 1292 | txd->ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT; |
121c8476 | 1293 | txd->cctl = plchan->dst_cctl; |
d7244e9a | 1294 | txd->src_addr = sgl->dma_address; |
b207b4d0 | 1295 | txd->dst_addr = plchan->dst_addr; |
e8689e63 | 1296 | } else if (direction == DMA_FROM_DEVICE) { |
4983a04f | 1297 | txd->ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; |
121c8476 | 1298 | txd->cctl = plchan->src_cctl; |
b207b4d0 | 1299 | txd->src_addr = plchan->src_addr; |
d7244e9a | 1300 | txd->dst_addr = sgl->dma_address; |
e8689e63 LW |
1301 | } else { |
1302 | dev_err(&pl08x->adev->dev, | |
1303 | "%s direction unsupported\n", __func__); | |
1304 | return NULL; | |
1305 | } | |
e8689e63 LW |
1306 | |
1307 | ret = pl08x_prep_channel_resources(plchan, txd); | |
1308 | if (ret) | |
1309 | return NULL; | |
e8689e63 LW |
1310 | |
1311 | return &txd->tx; | |
1312 | } | |
1313 | ||
1314 | static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, | |
1315 | unsigned long arg) | |
1316 | { | |
1317 | struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); | |
1318 | struct pl08x_driver_data *pl08x = plchan->host; | |
1319 | unsigned long flags; | |
1320 | int ret = 0; | |
1321 | ||
1322 | /* Controls applicable to inactive channels */ | |
1323 | if (cmd == DMA_SLAVE_CONFIG) { | |
f0fd9446 RKAL |
1324 | return dma_set_runtime_config(chan, |
1325 | (struct dma_slave_config *)arg); | |
e8689e63 LW |
1326 | } |
1327 | ||
1328 | /* | |
1329 | * Anything succeeds on channels with no physical allocation and | |
1330 | * no queued transfers. | |
1331 | */ | |
1332 | spin_lock_irqsave(&plchan->lock, flags); | |
1333 | if (!plchan->phychan && !plchan->at) { | |
1334 | spin_unlock_irqrestore(&plchan->lock, flags); | |
1335 | return 0; | |
1336 | } | |
1337 | ||
1338 | switch (cmd) { | |
1339 | case DMA_TERMINATE_ALL: | |
1340 | plchan->state = PL08X_CHAN_IDLE; | |
1341 | ||
1342 | if (plchan->phychan) { | |
fb526210 | 1343 | pl08x_terminate_phy_chan(pl08x, plchan->phychan); |
e8689e63 LW |
1344 | |
1345 | /* | |
1346 | * Mark physical channel as free and free any slave | |
1347 | * signal | |
1348 | */ | |
8c8cc2b1 | 1349 | release_phy_channel(plchan); |
e8689e63 | 1350 | } |
e8689e63 LW |
1351 | /* Dequeue jobs and free LLIs */ |
1352 | if (plchan->at) { | |
1353 | pl08x_free_txd(pl08x, plchan->at); | |
1354 | plchan->at = NULL; | |
1355 | } | |
1356 | /* Dequeue jobs not yet fired as well */ | |
1357 | pl08x_free_txd_list(pl08x, plchan); | |
1358 | break; | |
1359 | case DMA_PAUSE: | |
1360 | pl08x_pause_phy_chan(plchan->phychan); | |
1361 | plchan->state = PL08X_CHAN_PAUSED; | |
1362 | break; | |
1363 | case DMA_RESUME: | |
1364 | pl08x_resume_phy_chan(plchan->phychan); | |
1365 | plchan->state = PL08X_CHAN_RUNNING; | |
1366 | break; | |
1367 | default: | |
1368 | /* Unknown command */ | |
1369 | ret = -ENXIO; | |
1370 | break; | |
1371 | } | |
1372 | ||
1373 | spin_unlock_irqrestore(&plchan->lock, flags); | |
1374 | ||
1375 | return ret; | |
1376 | } | |
1377 | ||
1378 | bool pl08x_filter_id(struct dma_chan *chan, void *chan_id) | |
1379 | { | |
1380 | struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); | |
1381 | char *name = chan_id; | |
1382 | ||
1383 | /* Check that the channel is not taken! */ | |
1384 | if (!strcmp(plchan->name, name)) | |
1385 | return true; | |
1386 | ||
1387 | return false; | |
1388 | } | |
1389 | ||
1390 | /* | |
1391 | * Just check that the device is there and active | |
94ae8522 RKAL |
1392 | * TODO: turn this bit on/off depending on the number of physical channels |
1393 | * actually used, if it is zero... well shut it off. That will save some | |
1394 | * power. Cut the clock at the same time. | |
e8689e63 LW |
1395 | */ |
1396 | static void pl08x_ensure_on(struct pl08x_driver_data *pl08x) | |
1397 | { | |
48a59ef3 | 1398 | writel(PL080_CONFIG_ENABLE, pl08x->base + PL080_CONFIG); |
e8689e63 LW |
1399 | } |
1400 | ||
3d992e1a RKAL |
1401 | static void pl08x_unmap_buffers(struct pl08x_txd *txd) |
1402 | { | |
1403 | struct device *dev = txd->tx.chan->device->dev; | |
1404 | ||
1405 | if (!(txd->tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) { | |
1406 | if (txd->tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE) | |
1407 | dma_unmap_single(dev, txd->src_addr, txd->len, | |
1408 | DMA_TO_DEVICE); | |
1409 | else | |
1410 | dma_unmap_page(dev, txd->src_addr, txd->len, | |
1411 | DMA_TO_DEVICE); | |
1412 | } | |
1413 | if (!(txd->tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) { | |
1414 | if (txd->tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE) | |
1415 | dma_unmap_single(dev, txd->dst_addr, txd->len, | |
1416 | DMA_FROM_DEVICE); | |
1417 | else | |
1418 | dma_unmap_page(dev, txd->dst_addr, txd->len, | |
1419 | DMA_FROM_DEVICE); | |
1420 | } | |
1421 | } | |
1422 | ||
e8689e63 LW |
1423 | static void pl08x_tasklet(unsigned long data) |
1424 | { | |
1425 | struct pl08x_dma_chan *plchan = (struct pl08x_dma_chan *) data; | |
e8689e63 | 1426 | struct pl08x_driver_data *pl08x = plchan->host; |
858c21c0 | 1427 | struct pl08x_txd *txd; |
bf072af4 | 1428 | unsigned long flags; |
e8689e63 | 1429 | |
bf072af4 | 1430 | spin_lock_irqsave(&plchan->lock, flags); |
e8689e63 | 1431 | |
858c21c0 RKAL |
1432 | txd = plchan->at; |
1433 | plchan->at = NULL; | |
e8689e63 | 1434 | |
858c21c0 | 1435 | if (txd) { |
94ae8522 | 1436 | /* Update last completed */ |
858c21c0 | 1437 | plchan->lc = txd->tx.cookie; |
e8689e63 | 1438 | } |
8087aacd | 1439 | |
94ae8522 | 1440 | /* If a new descriptor is queued, set it up plchan->at is NULL here */ |
15c17232 | 1441 | if (!list_empty(&plchan->pend_list)) { |
e8689e63 LW |
1442 | struct pl08x_txd *next; |
1443 | ||
15c17232 | 1444 | next = list_first_entry(&plchan->pend_list, |
e8689e63 LW |
1445 | struct pl08x_txd, |
1446 | node); | |
1447 | list_del(&next->node); | |
c885bee4 RKAL |
1448 | |
1449 | pl08x_start_txd(plchan, next); | |
8087aacd RKAL |
1450 | } else if (plchan->phychan_hold) { |
1451 | /* | |
1452 | * This channel is still in use - we have a new txd being | |
1453 | * prepared and will soon be queued. Don't give up the | |
1454 | * physical channel. | |
1455 | */ | |
e8689e63 LW |
1456 | } else { |
1457 | struct pl08x_dma_chan *waiting = NULL; | |
1458 | ||
1459 | /* | |
1460 | * No more jobs, so free up the physical channel | |
1461 | * Free any allocated signal on slave transfers too | |
1462 | */ | |
8c8cc2b1 | 1463 | release_phy_channel(plchan); |
e8689e63 LW |
1464 | plchan->state = PL08X_CHAN_IDLE; |
1465 | ||
1466 | /* | |
94ae8522 RKAL |
1467 | * And NOW before anyone else can grab that free:d up |
1468 | * physical channel, see if there is some memcpy pending | |
1469 | * that seriously needs to start because of being stacked | |
1470 | * up while we were choking the physical channels with data. | |
e8689e63 LW |
1471 | */ |
1472 | list_for_each_entry(waiting, &pl08x->memcpy.channels, | |
1473 | chan.device_node) { | |
3e27ee84 VK |
1474 | if (waiting->state == PL08X_CHAN_WAITING && |
1475 | waiting->waiting != NULL) { | |
e8689e63 LW |
1476 | int ret; |
1477 | ||
1478 | /* This should REALLY not fail now */ | |
1479 | ret = prep_phy_channel(waiting, | |
1480 | waiting->waiting); | |
1481 | BUG_ON(ret); | |
8087aacd | 1482 | waiting->phychan_hold--; |
e8689e63 LW |
1483 | waiting->state = PL08X_CHAN_RUNNING; |
1484 | waiting->waiting = NULL; | |
1485 | pl08x_issue_pending(&waiting->chan); | |
1486 | break; | |
1487 | } | |
1488 | } | |
1489 | } | |
1490 | ||
bf072af4 | 1491 | spin_unlock_irqrestore(&plchan->lock, flags); |
858c21c0 | 1492 | |
3d992e1a RKAL |
1493 | if (txd) { |
1494 | dma_async_tx_callback callback = txd->tx.callback; | |
1495 | void *callback_param = txd->tx.callback_param; | |
1496 | ||
1497 | /* Don't try to unmap buffers on slave channels */ | |
1498 | if (!plchan->slave) | |
1499 | pl08x_unmap_buffers(txd); | |
1500 | ||
1501 | /* Free the descriptor */ | |
1502 | spin_lock_irqsave(&plchan->lock, flags); | |
1503 | pl08x_free_txd(pl08x, txd); | |
1504 | spin_unlock_irqrestore(&plchan->lock, flags); | |
1505 | ||
1506 | /* Callback to signal completion */ | |
1507 | if (callback) | |
1508 | callback(callback_param); | |
1509 | } | |
e8689e63 LW |
1510 | } |
1511 | ||
1512 | static irqreturn_t pl08x_irq(int irq, void *dev) | |
1513 | { | |
1514 | struct pl08x_driver_data *pl08x = dev; | |
28da2836 VK |
1515 | u32 mask = 0, err, tc, i; |
1516 | ||
1517 | /* check & clear - ERR & TC interrupts */ | |
1518 | err = readl(pl08x->base + PL080_ERR_STATUS); | |
1519 | if (err) { | |
1520 | dev_err(&pl08x->adev->dev, "%s error interrupt, register value 0x%08x\n", | |
1521 | __func__, err); | |
1522 | writel(err, pl08x->base + PL080_ERR_CLEAR); | |
e8689e63 | 1523 | } |
28da2836 VK |
1524 | tc = readl(pl08x->base + PL080_INT_STATUS); |
1525 | if (tc) | |
1526 | writel(tc, pl08x->base + PL080_TC_CLEAR); | |
1527 | ||
1528 | if (!err && !tc) | |
1529 | return IRQ_NONE; | |
1530 | ||
e8689e63 | 1531 | for (i = 0; i < pl08x->vd->channels; i++) { |
28da2836 | 1532 | if (((1 << i) & err) || ((1 << i) & tc)) { |
e8689e63 LW |
1533 | /* Locate physical channel */ |
1534 | struct pl08x_phy_chan *phychan = &pl08x->phy_chans[i]; | |
1535 | struct pl08x_dma_chan *plchan = phychan->serving; | |
1536 | ||
28da2836 VK |
1537 | if (!plchan) { |
1538 | dev_err(&pl08x->adev->dev, | |
1539 | "%s Error TC interrupt on unused channel: 0x%08x\n", | |
1540 | __func__, i); | |
1541 | continue; | |
1542 | } | |
1543 | ||
e8689e63 LW |
1544 | /* Schedule tasklet on this channel */ |
1545 | tasklet_schedule(&plchan->tasklet); | |
e8689e63 LW |
1546 | mask |= (1 << i); |
1547 | } | |
1548 | } | |
e8689e63 LW |
1549 | |
1550 | return mask ? IRQ_HANDLED : IRQ_NONE; | |
1551 | } | |
1552 | ||
121c8476 RKAL |
1553 | static void pl08x_dma_slave_init(struct pl08x_dma_chan *chan) |
1554 | { | |
1555 | u32 cctl = pl08x_cctl(chan->cd->cctl); | |
1556 | ||
1557 | chan->slave = true; | |
1558 | chan->name = chan->cd->bus_id; | |
1559 | chan->src_addr = chan->cd->addr; | |
1560 | chan->dst_addr = chan->cd->addr; | |
1561 | chan->src_cctl = cctl | PL080_CONTROL_DST_INCR | | |
1562 | pl08x_select_bus(chan->cd->periph_buses, chan->host->mem_buses); | |
1563 | chan->dst_cctl = cctl | PL080_CONTROL_SRC_INCR | | |
1564 | pl08x_select_bus(chan->host->mem_buses, chan->cd->periph_buses); | |
1565 | } | |
1566 | ||
e8689e63 LW |
1567 | /* |
1568 | * Initialise the DMAC memcpy/slave channels. | |
1569 | * Make a local wrapper to hold required data | |
1570 | */ | |
1571 | static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x, | |
3e27ee84 | 1572 | struct dma_device *dmadev, unsigned int channels, bool slave) |
e8689e63 LW |
1573 | { |
1574 | struct pl08x_dma_chan *chan; | |
1575 | int i; | |
1576 | ||
1577 | INIT_LIST_HEAD(&dmadev->channels); | |
94ae8522 | 1578 | |
e8689e63 LW |
1579 | /* |
1580 | * Register as many many memcpy as we have physical channels, | |
1581 | * we won't always be able to use all but the code will have | |
1582 | * to cope with that situation. | |
1583 | */ | |
1584 | for (i = 0; i < channels; i++) { | |
b201c111 | 1585 | chan = kzalloc(sizeof(*chan), GFP_KERNEL); |
e8689e63 LW |
1586 | if (!chan) { |
1587 | dev_err(&pl08x->adev->dev, | |
1588 | "%s no memory for channel\n", __func__); | |
1589 | return -ENOMEM; | |
1590 | } | |
1591 | ||
1592 | chan->host = pl08x; | |
1593 | chan->state = PL08X_CHAN_IDLE; | |
1594 | ||
1595 | if (slave) { | |
e8689e63 | 1596 | chan->cd = &pl08x->pd->slave_channels[i]; |
121c8476 | 1597 | pl08x_dma_slave_init(chan); |
e8689e63 LW |
1598 | } else { |
1599 | chan->cd = &pl08x->pd->memcpy_channel; | |
1600 | chan->name = kasprintf(GFP_KERNEL, "memcpy%d", i); | |
1601 | if (!chan->name) { | |
1602 | kfree(chan); | |
1603 | return -ENOMEM; | |
1604 | } | |
1605 | } | |
b58b6b5b RKAL |
1606 | if (chan->cd->circular_buffer) { |
1607 | dev_err(&pl08x->adev->dev, | |
1608 | "channel %s: circular buffers not supported\n", | |
1609 | chan->name); | |
1610 | kfree(chan); | |
1611 | continue; | |
1612 | } | |
175a5e61 | 1613 | dev_dbg(&pl08x->adev->dev, |
e8689e63 LW |
1614 | "initialize virtual channel \"%s\"\n", |
1615 | chan->name); | |
1616 | ||
1617 | chan->chan.device = dmadev; | |
91aa5fad RKAL |
1618 | chan->chan.cookie = 0; |
1619 | chan->lc = 0; | |
e8689e63 LW |
1620 | |
1621 | spin_lock_init(&chan->lock); | |
15c17232 | 1622 | INIT_LIST_HEAD(&chan->pend_list); |
e8689e63 LW |
1623 | tasklet_init(&chan->tasklet, pl08x_tasklet, |
1624 | (unsigned long) chan); | |
1625 | ||
1626 | list_add_tail(&chan->chan.device_node, &dmadev->channels); | |
1627 | } | |
1628 | dev_info(&pl08x->adev->dev, "initialized %d virtual %s channels\n", | |
1629 | i, slave ? "slave" : "memcpy"); | |
1630 | return i; | |
1631 | } | |
1632 | ||
1633 | static void pl08x_free_virtual_channels(struct dma_device *dmadev) | |
1634 | { | |
1635 | struct pl08x_dma_chan *chan = NULL; | |
1636 | struct pl08x_dma_chan *next; | |
1637 | ||
1638 | list_for_each_entry_safe(chan, | |
1639 | next, &dmadev->channels, chan.device_node) { | |
1640 | list_del(&chan->chan.device_node); | |
1641 | kfree(chan); | |
1642 | } | |
1643 | } | |
1644 | ||
1645 | #ifdef CONFIG_DEBUG_FS | |
1646 | static const char *pl08x_state_str(enum pl08x_dma_chan_state state) | |
1647 | { | |
1648 | switch (state) { | |
1649 | case PL08X_CHAN_IDLE: | |
1650 | return "idle"; | |
1651 | case PL08X_CHAN_RUNNING: | |
1652 | return "running"; | |
1653 | case PL08X_CHAN_PAUSED: | |
1654 | return "paused"; | |
1655 | case PL08X_CHAN_WAITING: | |
1656 | return "waiting"; | |
1657 | default: | |
1658 | break; | |
1659 | } | |
1660 | return "UNKNOWN STATE"; | |
1661 | } | |
1662 | ||
1663 | static int pl08x_debugfs_show(struct seq_file *s, void *data) | |
1664 | { | |
1665 | struct pl08x_driver_data *pl08x = s->private; | |
1666 | struct pl08x_dma_chan *chan; | |
1667 | struct pl08x_phy_chan *ch; | |
1668 | unsigned long flags; | |
1669 | int i; | |
1670 | ||
1671 | seq_printf(s, "PL08x physical channels:\n"); | |
1672 | seq_printf(s, "CHANNEL:\tUSER:\n"); | |
1673 | seq_printf(s, "--------\t-----\n"); | |
1674 | for (i = 0; i < pl08x->vd->channels; i++) { | |
1675 | struct pl08x_dma_chan *virt_chan; | |
1676 | ||
1677 | ch = &pl08x->phy_chans[i]; | |
1678 | ||
1679 | spin_lock_irqsave(&ch->lock, flags); | |
1680 | virt_chan = ch->serving; | |
1681 | ||
1682 | seq_printf(s, "%d\t\t%s\n", | |
1683 | ch->id, virt_chan ? virt_chan->name : "(none)"); | |
1684 | ||
1685 | spin_unlock_irqrestore(&ch->lock, flags); | |
1686 | } | |
1687 | ||
1688 | seq_printf(s, "\nPL08x virtual memcpy channels:\n"); | |
1689 | seq_printf(s, "CHANNEL:\tSTATE:\n"); | |
1690 | seq_printf(s, "--------\t------\n"); | |
1691 | list_for_each_entry(chan, &pl08x->memcpy.channels, chan.device_node) { | |
3e2a037c | 1692 | seq_printf(s, "%s\t\t%s\n", chan->name, |
e8689e63 LW |
1693 | pl08x_state_str(chan->state)); |
1694 | } | |
1695 | ||
1696 | seq_printf(s, "\nPL08x virtual slave channels:\n"); | |
1697 | seq_printf(s, "CHANNEL:\tSTATE:\n"); | |
1698 | seq_printf(s, "--------\t------\n"); | |
1699 | list_for_each_entry(chan, &pl08x->slave.channels, chan.device_node) { | |
3e2a037c | 1700 | seq_printf(s, "%s\t\t%s\n", chan->name, |
e8689e63 LW |
1701 | pl08x_state_str(chan->state)); |
1702 | } | |
1703 | ||
1704 | return 0; | |
1705 | } | |
1706 | ||
1707 | static int pl08x_debugfs_open(struct inode *inode, struct file *file) | |
1708 | { | |
1709 | return single_open(file, pl08x_debugfs_show, inode->i_private); | |
1710 | } | |
1711 | ||
1712 | static const struct file_operations pl08x_debugfs_operations = { | |
1713 | .open = pl08x_debugfs_open, | |
1714 | .read = seq_read, | |
1715 | .llseek = seq_lseek, | |
1716 | .release = single_release, | |
1717 | }; | |
1718 | ||
1719 | static void init_pl08x_debugfs(struct pl08x_driver_data *pl08x) | |
1720 | { | |
1721 | /* Expose a simple debugfs interface to view all clocks */ | |
3e27ee84 VK |
1722 | (void) debugfs_create_file(dev_name(&pl08x->adev->dev), |
1723 | S_IFREG | S_IRUGO, NULL, pl08x, | |
1724 | &pl08x_debugfs_operations); | |
e8689e63 LW |
1725 | } |
1726 | ||
1727 | #else | |
1728 | static inline void init_pl08x_debugfs(struct pl08x_driver_data *pl08x) | |
1729 | { | |
1730 | } | |
1731 | #endif | |
1732 | ||
aa25afad | 1733 | static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) |
e8689e63 LW |
1734 | { |
1735 | struct pl08x_driver_data *pl08x; | |
f96ca9ec | 1736 | const struct vendor_data *vd = id->data; |
e8689e63 LW |
1737 | int ret = 0; |
1738 | int i; | |
1739 | ||
1740 | ret = amba_request_regions(adev, NULL); | |
1741 | if (ret) | |
1742 | return ret; | |
1743 | ||
1744 | /* Create the driver state holder */ | |
b201c111 | 1745 | pl08x = kzalloc(sizeof(*pl08x), GFP_KERNEL); |
e8689e63 LW |
1746 | if (!pl08x) { |
1747 | ret = -ENOMEM; | |
1748 | goto out_no_pl08x; | |
1749 | } | |
1750 | ||
b7b6018b VK |
1751 | pm_runtime_set_active(&adev->dev); |
1752 | pm_runtime_enable(&adev->dev); | |
1753 | ||
e8689e63 LW |
1754 | /* Initialize memcpy engine */ |
1755 | dma_cap_set(DMA_MEMCPY, pl08x->memcpy.cap_mask); | |
1756 | pl08x->memcpy.dev = &adev->dev; | |
1757 | pl08x->memcpy.device_alloc_chan_resources = pl08x_alloc_chan_resources; | |
1758 | pl08x->memcpy.device_free_chan_resources = pl08x_free_chan_resources; | |
1759 | pl08x->memcpy.device_prep_dma_memcpy = pl08x_prep_dma_memcpy; | |
1760 | pl08x->memcpy.device_prep_dma_interrupt = pl08x_prep_dma_interrupt; | |
1761 | pl08x->memcpy.device_tx_status = pl08x_dma_tx_status; | |
1762 | pl08x->memcpy.device_issue_pending = pl08x_issue_pending; | |
1763 | pl08x->memcpy.device_control = pl08x_control; | |
1764 | ||
1765 | /* Initialize slave engine */ | |
1766 | dma_cap_set(DMA_SLAVE, pl08x->slave.cap_mask); | |
1767 | pl08x->slave.dev = &adev->dev; | |
1768 | pl08x->slave.device_alloc_chan_resources = pl08x_alloc_chan_resources; | |
1769 | pl08x->slave.device_free_chan_resources = pl08x_free_chan_resources; | |
1770 | pl08x->slave.device_prep_dma_interrupt = pl08x_prep_dma_interrupt; | |
1771 | pl08x->slave.device_tx_status = pl08x_dma_tx_status; | |
1772 | pl08x->slave.device_issue_pending = pl08x_issue_pending; | |
1773 | pl08x->slave.device_prep_slave_sg = pl08x_prep_slave_sg; | |
1774 | pl08x->slave.device_control = pl08x_control; | |
1775 | ||
1776 | /* Get the platform data */ | |
1777 | pl08x->pd = dev_get_platdata(&adev->dev); | |
1778 | if (!pl08x->pd) { | |
1779 | dev_err(&adev->dev, "no platform data supplied\n"); | |
1780 | goto out_no_platdata; | |
1781 | } | |
1782 | ||
1783 | /* Assign useful pointers to the driver state */ | |
1784 | pl08x->adev = adev; | |
1785 | pl08x->vd = vd; | |
1786 | ||
30749cb4 RKAL |
1787 | /* By default, AHB1 only. If dualmaster, from platform */ |
1788 | pl08x->lli_buses = PL08X_AHB1; | |
1789 | pl08x->mem_buses = PL08X_AHB1; | |
1790 | if (pl08x->vd->dualmaster) { | |
1791 | pl08x->lli_buses = pl08x->pd->lli_buses; | |
1792 | pl08x->mem_buses = pl08x->pd->mem_buses; | |
1793 | } | |
1794 | ||
e8689e63 LW |
1795 | /* A DMA memory pool for LLIs, align on 1-byte boundary */ |
1796 | pl08x->pool = dma_pool_create(DRIVER_NAME, &pl08x->adev->dev, | |
1797 | PL08X_LLI_TSFR_SIZE, PL08X_ALIGN, 0); | |
1798 | if (!pl08x->pool) { | |
1799 | ret = -ENOMEM; | |
1800 | goto out_no_lli_pool; | |
1801 | } | |
1802 | ||
1803 | spin_lock_init(&pl08x->lock); | |
1804 | ||
1805 | pl08x->base = ioremap(adev->res.start, resource_size(&adev->res)); | |
1806 | if (!pl08x->base) { | |
1807 | ret = -ENOMEM; | |
1808 | goto out_no_ioremap; | |
1809 | } | |
1810 | ||
1811 | /* Turn on the PL08x */ | |
1812 | pl08x_ensure_on(pl08x); | |
1813 | ||
94ae8522 | 1814 | /* Attach the interrupt handler */ |
e8689e63 LW |
1815 | writel(0x000000FF, pl08x->base + PL080_ERR_CLEAR); |
1816 | writel(0x000000FF, pl08x->base + PL080_TC_CLEAR); | |
1817 | ||
1818 | ret = request_irq(adev->irq[0], pl08x_irq, IRQF_DISABLED, | |
b05cd8f4 | 1819 | DRIVER_NAME, pl08x); |
e8689e63 LW |
1820 | if (ret) { |
1821 | dev_err(&adev->dev, "%s failed to request interrupt %d\n", | |
1822 | __func__, adev->irq[0]); | |
1823 | goto out_no_irq; | |
1824 | } | |
1825 | ||
1826 | /* Initialize physical channels */ | |
b201c111 | 1827 | pl08x->phy_chans = kmalloc((vd->channels * sizeof(*pl08x->phy_chans)), |
e8689e63 LW |
1828 | GFP_KERNEL); |
1829 | if (!pl08x->phy_chans) { | |
1830 | dev_err(&adev->dev, "%s failed to allocate " | |
1831 | "physical channel holders\n", | |
1832 | __func__); | |
1833 | goto out_no_phychans; | |
1834 | } | |
1835 | ||
1836 | for (i = 0; i < vd->channels; i++) { | |
1837 | struct pl08x_phy_chan *ch = &pl08x->phy_chans[i]; | |
1838 | ||
1839 | ch->id = i; | |
1840 | ch->base = pl08x->base + PL080_Cx_BASE(i); | |
1841 | spin_lock_init(&ch->lock); | |
1842 | ch->serving = NULL; | |
1843 | ch->signal = -1; | |
175a5e61 VK |
1844 | dev_dbg(&adev->dev, "physical channel %d is %s\n", |
1845 | i, pl08x_phy_channel_busy(ch) ? "BUSY" : "FREE"); | |
e8689e63 LW |
1846 | } |
1847 | ||
1848 | /* Register as many memcpy channels as there are physical channels */ | |
1849 | ret = pl08x_dma_init_virtual_channels(pl08x, &pl08x->memcpy, | |
1850 | pl08x->vd->channels, false); | |
1851 | if (ret <= 0) { | |
1852 | dev_warn(&pl08x->adev->dev, | |
1853 | "%s failed to enumerate memcpy channels - %d\n", | |
1854 | __func__, ret); | |
1855 | goto out_no_memcpy; | |
1856 | } | |
1857 | pl08x->memcpy.chancnt = ret; | |
1858 | ||
1859 | /* Register slave channels */ | |
1860 | ret = pl08x_dma_init_virtual_channels(pl08x, &pl08x->slave, | |
3e27ee84 | 1861 | pl08x->pd->num_slave_channels, true); |
e8689e63 LW |
1862 | if (ret <= 0) { |
1863 | dev_warn(&pl08x->adev->dev, | |
1864 | "%s failed to enumerate slave channels - %d\n", | |
1865 | __func__, ret); | |
1866 | goto out_no_slave; | |
1867 | } | |
1868 | pl08x->slave.chancnt = ret; | |
1869 | ||
1870 | ret = dma_async_device_register(&pl08x->memcpy); | |
1871 | if (ret) { | |
1872 | dev_warn(&pl08x->adev->dev, | |
1873 | "%s failed to register memcpy as an async device - %d\n", | |
1874 | __func__, ret); | |
1875 | goto out_no_memcpy_reg; | |
1876 | } | |
1877 | ||
1878 | ret = dma_async_device_register(&pl08x->slave); | |
1879 | if (ret) { | |
1880 | dev_warn(&pl08x->adev->dev, | |
1881 | "%s failed to register slave as an async device - %d\n", | |
1882 | __func__, ret); | |
1883 | goto out_no_slave_reg; | |
1884 | } | |
1885 | ||
1886 | amba_set_drvdata(adev, pl08x); | |
1887 | init_pl08x_debugfs(pl08x); | |
b05cd8f4 RKAL |
1888 | dev_info(&pl08x->adev->dev, "DMA: PL%03x rev%u at 0x%08llx irq %d\n", |
1889 | amba_part(adev), amba_rev(adev), | |
1890 | (unsigned long long)adev->res.start, adev->irq[0]); | |
b7b6018b VK |
1891 | |
1892 | pm_runtime_put(&adev->dev); | |
e8689e63 LW |
1893 | return 0; |
1894 | ||
1895 | out_no_slave_reg: | |
1896 | dma_async_device_unregister(&pl08x->memcpy); | |
1897 | out_no_memcpy_reg: | |
1898 | pl08x_free_virtual_channels(&pl08x->slave); | |
1899 | out_no_slave: | |
1900 | pl08x_free_virtual_channels(&pl08x->memcpy); | |
1901 | out_no_memcpy: | |
1902 | kfree(pl08x->phy_chans); | |
1903 | out_no_phychans: | |
1904 | free_irq(adev->irq[0], pl08x); | |
1905 | out_no_irq: | |
1906 | iounmap(pl08x->base); | |
1907 | out_no_ioremap: | |
1908 | dma_pool_destroy(pl08x->pool); | |
1909 | out_no_lli_pool: | |
1910 | out_no_platdata: | |
b7b6018b VK |
1911 | pm_runtime_put(&adev->dev); |
1912 | pm_runtime_disable(&adev->dev); | |
1913 | ||
e8689e63 LW |
1914 | kfree(pl08x); |
1915 | out_no_pl08x: | |
1916 | amba_release_regions(adev); | |
1917 | return ret; | |
1918 | } | |
1919 | ||
1920 | /* PL080 has 8 channels and the PL080 have just 2 */ | |
1921 | static struct vendor_data vendor_pl080 = { | |
e8689e63 LW |
1922 | .channels = 8, |
1923 | .dualmaster = true, | |
1924 | }; | |
1925 | ||
1926 | static struct vendor_data vendor_pl081 = { | |
e8689e63 LW |
1927 | .channels = 2, |
1928 | .dualmaster = false, | |
1929 | }; | |
1930 | ||
1931 | static struct amba_id pl08x_ids[] = { | |
1932 | /* PL080 */ | |
1933 | { | |
1934 | .id = 0x00041080, | |
1935 | .mask = 0x000fffff, | |
1936 | .data = &vendor_pl080, | |
1937 | }, | |
1938 | /* PL081 */ | |
1939 | { | |
1940 | .id = 0x00041081, | |
1941 | .mask = 0x000fffff, | |
1942 | .data = &vendor_pl081, | |
1943 | }, | |
1944 | /* Nomadik 8815 PL080 variant */ | |
1945 | { | |
1946 | .id = 0x00280880, | |
1947 | .mask = 0x00ffffff, | |
1948 | .data = &vendor_pl080, | |
1949 | }, | |
1950 | { 0, 0 }, | |
1951 | }; | |
1952 | ||
1953 | static struct amba_driver pl08x_amba_driver = { | |
1954 | .drv.name = DRIVER_NAME, | |
1955 | .id_table = pl08x_ids, | |
1956 | .probe = pl08x_probe, | |
1957 | }; | |
1958 | ||
1959 | static int __init pl08x_init(void) | |
1960 | { | |
1961 | int retval; | |
1962 | retval = amba_driver_register(&pl08x_amba_driver); | |
1963 | if (retval) | |
1964 | printk(KERN_WARNING DRIVER_NAME | |
e8b5e11d | 1965 | "failed to register as an AMBA device (%d)\n", |
e8689e63 LW |
1966 | retval); |
1967 | return retval; | |
1968 | } | |
1969 | subsys_initcall(pl08x_init); |