]>
Commit | Line | Data |
---|---|---|
2bc65418 | 1 | #include "amd64_edac.h" |
7d6034d3 | 2 | #include <asm/k8.h> |
2bc65418 DT |
3 | |
4 | static struct edac_pci_ctl_info *amd64_ctl_pci; | |
5 | ||
6 | static int report_gart_errors; | |
7 | module_param(report_gart_errors, int, 0644); | |
8 | ||
9 | /* | |
10 | * Set by command line parameter. If BIOS has enabled the ECC, this override is | |
11 | * cleared to prevent re-enabling the hardware by this driver. | |
12 | */ | |
13 | static int ecc_enable_override; | |
14 | module_param(ecc_enable_override, int, 0644); | |
15 | ||
16 | /* Lookup table for all possible MC control instances */ | |
17 | struct amd64_pvt; | |
3011b20d BP |
18 | static struct mem_ctl_info *mci_lookup[EDAC_MAX_NUMNODES]; |
19 | static struct amd64_pvt *pvt_lookup[EDAC_MAX_NUMNODES]; | |
2bc65418 | 20 | |
b70ef010 BP |
21 | /* |
22 | * See F2x80 for K8 and F2x[1,0]80 for Fam10 and later. The table below is only | |
23 | * for DDR2 DRAM mapping. | |
24 | */ | |
25 | u32 revf_quad_ddr2_shift[] = { | |
26 | 0, /* 0000b NULL DIMM (128mb) */ | |
27 | 28, /* 0001b 256mb */ | |
28 | 29, /* 0010b 512mb */ | |
29 | 29, /* 0011b 512mb */ | |
30 | 29, /* 0100b 512mb */ | |
31 | 30, /* 0101b 1gb */ | |
32 | 30, /* 0110b 1gb */ | |
33 | 31, /* 0111b 2gb */ | |
34 | 31, /* 1000b 2gb */ | |
35 | 32, /* 1001b 4gb */ | |
36 | 32, /* 1010b 4gb */ | |
37 | 33, /* 1011b 8gb */ | |
38 | 0, /* 1100b future */ | |
39 | 0, /* 1101b future */ | |
40 | 0, /* 1110b future */ | |
41 | 0 /* 1111b future */ | |
42 | }; | |
43 | ||
44 | /* | |
45 | * Valid scrub rates for the K8 hardware memory scrubber. We map the scrubbing | |
46 | * bandwidth to a valid bit pattern. The 'set' operation finds the 'matching- | |
47 | * or higher value'. | |
48 | * | |
49 | *FIXME: Produce a better mapping/linearisation. | |
50 | */ | |
51 | ||
52 | struct scrubrate scrubrates[] = { | |
53 | { 0x01, 1600000000UL}, | |
54 | { 0x02, 800000000UL}, | |
55 | { 0x03, 400000000UL}, | |
56 | { 0x04, 200000000UL}, | |
57 | { 0x05, 100000000UL}, | |
58 | { 0x06, 50000000UL}, | |
59 | { 0x07, 25000000UL}, | |
60 | { 0x08, 12284069UL}, | |
61 | { 0x09, 6274509UL}, | |
62 | { 0x0A, 3121951UL}, | |
63 | { 0x0B, 1560975UL}, | |
64 | { 0x0C, 781440UL}, | |
65 | { 0x0D, 390720UL}, | |
66 | { 0x0E, 195300UL}, | |
67 | { 0x0F, 97650UL}, | |
68 | { 0x10, 48854UL}, | |
69 | { 0x11, 24427UL}, | |
70 | { 0x12, 12213UL}, | |
71 | { 0x13, 6101UL}, | |
72 | { 0x14, 3051UL}, | |
73 | { 0x15, 1523UL}, | |
74 | { 0x16, 761UL}, | |
75 | { 0x00, 0UL}, /* scrubbing off */ | |
76 | }; | |
77 | ||
2bc65418 DT |
78 | /* |
79 | * Memory scrubber control interface. For K8, memory scrubbing is handled by | |
80 | * hardware and can involve L2 cache, dcache as well as the main memory. With | |
81 | * F10, this is extended to L3 cache scrubbing on CPU models sporting that | |
82 | * functionality. | |
83 | * | |
84 | * This causes the "units" for the scrubbing speed to vary from 64 byte blocks | |
85 | * (dram) over to cache lines. This is nasty, so we will use bandwidth in | |
86 | * bytes/sec for the setting. | |
87 | * | |
88 | * Currently, we only do dram scrubbing. If the scrubbing is done in software on | |
89 | * other archs, we might not have access to the caches directly. | |
90 | */ | |
91 | ||
92 | /* | |
93 | * scan the scrub rate mapping table for a close or matching bandwidth value to | |
94 | * issue. If requested is too big, then use last maximum value found. | |
95 | */ | |
96 | static int amd64_search_set_scrub_rate(struct pci_dev *ctl, u32 new_bw, | |
97 | u32 min_scrubrate) | |
98 | { | |
99 | u32 scrubval; | |
100 | int i; | |
101 | ||
102 | /* | |
103 | * map the configured rate (new_bw) to a value specific to the AMD64 | |
104 | * memory controller and apply to register. Search for the first | |
105 | * bandwidth entry that is greater or equal than the setting requested | |
106 | * and program that. If at last entry, turn off DRAM scrubbing. | |
107 | */ | |
108 | for (i = 0; i < ARRAY_SIZE(scrubrates); i++) { | |
109 | /* | |
110 | * skip scrub rates which aren't recommended | |
111 | * (see F10 BKDG, F3x58) | |
112 | */ | |
113 | if (scrubrates[i].scrubval < min_scrubrate) | |
114 | continue; | |
115 | ||
116 | if (scrubrates[i].bandwidth <= new_bw) | |
117 | break; | |
118 | ||
119 | /* | |
120 | * if no suitable bandwidth found, turn off DRAM scrubbing | |
121 | * entirely by falling back to the last element in the | |
122 | * scrubrates array. | |
123 | */ | |
124 | } | |
125 | ||
126 | scrubval = scrubrates[i].scrubval; | |
127 | if (scrubval) | |
128 | edac_printk(KERN_DEBUG, EDAC_MC, | |
129 | "Setting scrub rate bandwidth: %u\n", | |
130 | scrubrates[i].bandwidth); | |
131 | else | |
132 | edac_printk(KERN_DEBUG, EDAC_MC, "Turning scrubbing off.\n"); | |
133 | ||
134 | pci_write_bits32(ctl, K8_SCRCTRL, scrubval, 0x001F); | |
135 | ||
136 | return 0; | |
137 | } | |
138 | ||
139 | static int amd64_set_scrub_rate(struct mem_ctl_info *mci, u32 *bandwidth) | |
140 | { | |
141 | struct amd64_pvt *pvt = mci->pvt_info; | |
142 | u32 min_scrubrate = 0x0; | |
143 | ||
144 | switch (boot_cpu_data.x86) { | |
145 | case 0xf: | |
146 | min_scrubrate = K8_MIN_SCRUB_RATE_BITS; | |
147 | break; | |
148 | case 0x10: | |
149 | min_scrubrate = F10_MIN_SCRUB_RATE_BITS; | |
150 | break; | |
151 | case 0x11: | |
152 | min_scrubrate = F11_MIN_SCRUB_RATE_BITS; | |
153 | break; | |
154 | ||
155 | default: | |
156 | amd64_printk(KERN_ERR, "Unsupported family!\n"); | |
157 | break; | |
158 | } | |
159 | return amd64_search_set_scrub_rate(pvt->misc_f3_ctl, *bandwidth, | |
160 | min_scrubrate); | |
161 | } | |
162 | ||
163 | static int amd64_get_scrub_rate(struct mem_ctl_info *mci, u32 *bw) | |
164 | { | |
165 | struct amd64_pvt *pvt = mci->pvt_info; | |
166 | u32 scrubval = 0; | |
167 | int status = -1, i, ret = 0; | |
168 | ||
169 | ret = pci_read_config_dword(pvt->misc_f3_ctl, K8_SCRCTRL, &scrubval); | |
170 | if (ret) | |
171 | debugf0("Reading K8_SCRCTRL failed\n"); | |
172 | ||
173 | scrubval = scrubval & 0x001F; | |
174 | ||
175 | edac_printk(KERN_DEBUG, EDAC_MC, | |
176 | "pci-read, sdram scrub control value: %d \n", scrubval); | |
177 | ||
178 | for (i = 0; ARRAY_SIZE(scrubrates); i++) { | |
179 | if (scrubrates[i].scrubval == scrubval) { | |
180 | *bw = scrubrates[i].bandwidth; | |
181 | status = 0; | |
182 | break; | |
183 | } | |
184 | } | |
185 | ||
186 | return status; | |
187 | } | |
188 | ||
6775763a DT |
189 | /* Map from a CSROW entry to the mask entry that operates on it */ |
190 | static inline u32 amd64_map_to_dcs_mask(struct amd64_pvt *pvt, int csrow) | |
191 | { | |
9d858bb1 BP |
192 | if (boot_cpu_data.x86 == 0xf && pvt->ext_model < OPTERON_CPU_REV_F) |
193 | return csrow; | |
194 | else | |
195 | return csrow >> 1; | |
6775763a DT |
196 | } |
197 | ||
198 | /* return the 'base' address the i'th CS entry of the 'dct' DRAM controller */ | |
199 | static u32 amd64_get_dct_base(struct amd64_pvt *pvt, int dct, int csrow) | |
200 | { | |
201 | if (dct == 0) | |
202 | return pvt->dcsb0[csrow]; | |
203 | else | |
204 | return pvt->dcsb1[csrow]; | |
205 | } | |
206 | ||
207 | /* | |
208 | * Return the 'mask' address the i'th CS entry. This function is needed because | |
209 | * there number of DCSM registers on Rev E and prior vs Rev F and later is | |
210 | * different. | |
211 | */ | |
212 | static u32 amd64_get_dct_mask(struct amd64_pvt *pvt, int dct, int csrow) | |
213 | { | |
214 | if (dct == 0) | |
215 | return pvt->dcsm0[amd64_map_to_dcs_mask(pvt, csrow)]; | |
216 | else | |
217 | return pvt->dcsm1[amd64_map_to_dcs_mask(pvt, csrow)]; | |
218 | } | |
219 | ||
220 | ||
221 | /* | |
222 | * In *base and *limit, pass back the full 40-bit base and limit physical | |
223 | * addresses for the node given by node_id. This information is obtained from | |
224 | * DRAM Base (section 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers. The | |
225 | * base and limit addresses are of type SysAddr, as defined at the start of | |
226 | * section 3.4.4 (p. 70). They are the lowest and highest physical addresses | |
227 | * in the address range they represent. | |
228 | */ | |
229 | static void amd64_get_base_and_limit(struct amd64_pvt *pvt, int node_id, | |
230 | u64 *base, u64 *limit) | |
231 | { | |
232 | *base = pvt->dram_base[node_id]; | |
233 | *limit = pvt->dram_limit[node_id]; | |
234 | } | |
235 | ||
236 | /* | |
237 | * Return 1 if the SysAddr given by sys_addr matches the base/limit associated | |
238 | * with node_id | |
239 | */ | |
240 | static int amd64_base_limit_match(struct amd64_pvt *pvt, | |
241 | u64 sys_addr, int node_id) | |
242 | { | |
243 | u64 base, limit, addr; | |
244 | ||
245 | amd64_get_base_and_limit(pvt, node_id, &base, &limit); | |
246 | ||
247 | /* The K8 treats this as a 40-bit value. However, bits 63-40 will be | |
248 | * all ones if the most significant implemented address bit is 1. | |
249 | * Here we discard bits 63-40. See section 3.4.2 of AMD publication | |
250 | * 24592: AMD x86-64 Architecture Programmer's Manual Volume 1 | |
251 | * Application Programming. | |
252 | */ | |
253 | addr = sys_addr & 0x000000ffffffffffull; | |
254 | ||
255 | return (addr >= base) && (addr <= limit); | |
256 | } | |
257 | ||
258 | /* | |
259 | * Attempt to map a SysAddr to a node. On success, return a pointer to the | |
260 | * mem_ctl_info structure for the node that the SysAddr maps to. | |
261 | * | |
262 | * On failure, return NULL. | |
263 | */ | |
264 | static struct mem_ctl_info *find_mc_by_sys_addr(struct mem_ctl_info *mci, | |
265 | u64 sys_addr) | |
266 | { | |
267 | struct amd64_pvt *pvt; | |
268 | int node_id; | |
269 | u32 intlv_en, bits; | |
270 | ||
271 | /* | |
272 | * Here we use the DRAM Base (section 3.4.4.1) and DRAM Limit (section | |
273 | * 3.4.4.2) registers to map the SysAddr to a node ID. | |
274 | */ | |
275 | pvt = mci->pvt_info; | |
276 | ||
277 | /* | |
278 | * The value of this field should be the same for all DRAM Base | |
279 | * registers. Therefore we arbitrarily choose to read it from the | |
280 | * register for node 0. | |
281 | */ | |
282 | intlv_en = pvt->dram_IntlvEn[0]; | |
283 | ||
284 | if (intlv_en == 0) { | |
8edc5445 | 285 | for (node_id = 0; node_id < DRAM_REG_COUNT; node_id++) { |
6775763a | 286 | if (amd64_base_limit_match(pvt, sys_addr, node_id)) |
8edc5445 | 287 | goto found; |
6775763a | 288 | } |
8edc5445 | 289 | goto err_no_match; |
6775763a DT |
290 | } |
291 | ||
72f158fe BP |
292 | if (unlikely((intlv_en != 0x01) && |
293 | (intlv_en != 0x03) && | |
294 | (intlv_en != 0x07))) { | |
6775763a DT |
295 | amd64_printk(KERN_WARNING, "junk value of 0x%x extracted from " |
296 | "IntlvEn field of DRAM Base Register for node 0: " | |
72f158fe | 297 | "this probably indicates a BIOS bug.\n", intlv_en); |
6775763a DT |
298 | return NULL; |
299 | } | |
300 | ||
301 | bits = (((u32) sys_addr) >> 12) & intlv_en; | |
302 | ||
303 | for (node_id = 0; ; ) { | |
8edc5445 | 304 | if ((pvt->dram_IntlvSel[node_id] & intlv_en) == bits) |
6775763a DT |
305 | break; /* intlv_sel field matches */ |
306 | ||
307 | if (++node_id >= DRAM_REG_COUNT) | |
308 | goto err_no_match; | |
309 | } | |
310 | ||
311 | /* sanity test for sys_addr */ | |
312 | if (unlikely(!amd64_base_limit_match(pvt, sys_addr, node_id))) { | |
313 | amd64_printk(KERN_WARNING, | |
8edc5445 BP |
314 | "%s(): sys_addr 0x%llx falls outside base/limit " |
315 | "address range for node %d with node interleaving " | |
316 | "enabled.\n", | |
317 | __func__, sys_addr, node_id); | |
6775763a DT |
318 | return NULL; |
319 | } | |
320 | ||
321 | found: | |
322 | return edac_mc_find(node_id); | |
323 | ||
324 | err_no_match: | |
325 | debugf2("sys_addr 0x%lx doesn't match any node\n", | |
326 | (unsigned long)sys_addr); | |
327 | ||
328 | return NULL; | |
329 | } | |
e2ce7255 DT |
330 | |
331 | /* | |
332 | * Extract the DRAM CS base address from selected csrow register. | |
333 | */ | |
334 | static u64 base_from_dct_base(struct amd64_pvt *pvt, int csrow) | |
335 | { | |
336 | return ((u64) (amd64_get_dct_base(pvt, 0, csrow) & pvt->dcsb_base)) << | |
337 | pvt->dcs_shift; | |
338 | } | |
339 | ||
340 | /* | |
341 | * Extract the mask from the dcsb0[csrow] entry in a CPU revision-specific way. | |
342 | */ | |
343 | static u64 mask_from_dct_mask(struct amd64_pvt *pvt, int csrow) | |
344 | { | |
345 | u64 dcsm_bits, other_bits; | |
346 | u64 mask; | |
347 | ||
348 | /* Extract bits from DRAM CS Mask. */ | |
349 | dcsm_bits = amd64_get_dct_mask(pvt, 0, csrow) & pvt->dcsm_mask; | |
350 | ||
351 | other_bits = pvt->dcsm_mask; | |
352 | other_bits = ~(other_bits << pvt->dcs_shift); | |
353 | ||
354 | /* | |
355 | * The extracted bits from DCSM belong in the spaces represented by | |
356 | * the cleared bits in other_bits. | |
357 | */ | |
358 | mask = (dcsm_bits << pvt->dcs_shift) | other_bits; | |
359 | ||
360 | return mask; | |
361 | } | |
362 | ||
363 | /* | |
364 | * @input_addr is an InputAddr associated with the node given by mci. Return the | |
365 | * csrow that input_addr maps to, or -1 on failure (no csrow claims input_addr). | |
366 | */ | |
367 | static int input_addr_to_csrow(struct mem_ctl_info *mci, u64 input_addr) | |
368 | { | |
369 | struct amd64_pvt *pvt; | |
370 | int csrow; | |
371 | u64 base, mask; | |
372 | ||
373 | pvt = mci->pvt_info; | |
374 | ||
375 | /* | |
376 | * Here we use the DRAM CS Base and DRAM CS Mask registers. For each CS | |
377 | * base/mask register pair, test the condition shown near the start of | |
378 | * section 3.5.4 (p. 84, BKDG #26094, K8, revA-E). | |
379 | */ | |
9d858bb1 | 380 | for (csrow = 0; csrow < pvt->cs_count; csrow++) { |
e2ce7255 DT |
381 | |
382 | /* This DRAM chip select is disabled on this node */ | |
383 | if ((pvt->dcsb0[csrow] & K8_DCSB_CS_ENABLE) == 0) | |
384 | continue; | |
385 | ||
386 | base = base_from_dct_base(pvt, csrow); | |
387 | mask = ~mask_from_dct_mask(pvt, csrow); | |
388 | ||
389 | if ((input_addr & mask) == (base & mask)) { | |
390 | debugf2("InputAddr 0x%lx matches csrow %d (node %d)\n", | |
391 | (unsigned long)input_addr, csrow, | |
392 | pvt->mc_node_id); | |
393 | ||
394 | return csrow; | |
395 | } | |
396 | } | |
397 | ||
398 | debugf2("no matching csrow for InputAddr 0x%lx (MC node %d)\n", | |
399 | (unsigned long)input_addr, pvt->mc_node_id); | |
400 | ||
401 | return -1; | |
402 | } | |
403 | ||
404 | /* | |
405 | * Return the base value defined by the DRAM Base register for the node | |
406 | * represented by mci. This function returns the full 40-bit value despite the | |
407 | * fact that the register only stores bits 39-24 of the value. See section | |
408 | * 3.4.4.1 (BKDG #26094, K8, revA-E) | |
409 | */ | |
410 | static inline u64 get_dram_base(struct mem_ctl_info *mci) | |
411 | { | |
412 | struct amd64_pvt *pvt = mci->pvt_info; | |
413 | ||
414 | return pvt->dram_base[pvt->mc_node_id]; | |
415 | } | |
416 | ||
417 | /* | |
418 | * Obtain info from the DRAM Hole Address Register (section 3.4.8, pub #26094) | |
419 | * for the node represented by mci. Info is passed back in *hole_base, | |
420 | * *hole_offset, and *hole_size. Function returns 0 if info is valid or 1 if | |
421 | * info is invalid. Info may be invalid for either of the following reasons: | |
422 | * | |
423 | * - The revision of the node is not E or greater. In this case, the DRAM Hole | |
424 | * Address Register does not exist. | |
425 | * | |
426 | * - The DramHoleValid bit is cleared in the DRAM Hole Address Register, | |
427 | * indicating that its contents are not valid. | |
428 | * | |
429 | * The values passed back in *hole_base, *hole_offset, and *hole_size are | |
430 | * complete 32-bit values despite the fact that the bitfields in the DHAR | |
431 | * only represent bits 31-24 of the base and offset values. | |
432 | */ | |
433 | int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base, | |
434 | u64 *hole_offset, u64 *hole_size) | |
435 | { | |
436 | struct amd64_pvt *pvt = mci->pvt_info; | |
437 | u64 base; | |
438 | ||
439 | /* only revE and later have the DRAM Hole Address Register */ | |
440 | if (boot_cpu_data.x86 == 0xf && pvt->ext_model < OPTERON_CPU_REV_E) { | |
441 | debugf1(" revision %d for node %d does not support DHAR\n", | |
442 | pvt->ext_model, pvt->mc_node_id); | |
443 | return 1; | |
444 | } | |
445 | ||
446 | /* only valid for Fam10h */ | |
447 | if (boot_cpu_data.x86 == 0x10 && | |
448 | (pvt->dhar & F10_DRAM_MEM_HOIST_VALID) == 0) { | |
449 | debugf1(" Dram Memory Hoisting is DISABLED on this system\n"); | |
450 | return 1; | |
451 | } | |
452 | ||
453 | if ((pvt->dhar & DHAR_VALID) == 0) { | |
454 | debugf1(" Dram Memory Hoisting is DISABLED on this node %d\n", | |
455 | pvt->mc_node_id); | |
456 | return 1; | |
457 | } | |
458 | ||
459 | /* This node has Memory Hoisting */ | |
460 | ||
461 | /* +------------------+--------------------+--------------------+----- | |
462 | * | memory | DRAM hole | relocated | | |
463 | * | [0, (x - 1)] | [x, 0xffffffff] | addresses from | | |
464 | * | | | DRAM hole | | |
465 | * | | | [0x100000000, | | |
466 | * | | | (0x100000000+ | | |
467 | * | | | (0xffffffff-x))] | | |
468 | * +------------------+--------------------+--------------------+----- | |
469 | * | |
470 | * Above is a diagram of physical memory showing the DRAM hole and the | |
471 | * relocated addresses from the DRAM hole. As shown, the DRAM hole | |
472 | * starts at address x (the base address) and extends through address | |
473 | * 0xffffffff. The DRAM Hole Address Register (DHAR) relocates the | |
474 | * addresses in the hole so that they start at 0x100000000. | |
475 | */ | |
476 | ||
477 | base = dhar_base(pvt->dhar); | |
478 | ||
479 | *hole_base = base; | |
480 | *hole_size = (0x1ull << 32) - base; | |
481 | ||
482 | if (boot_cpu_data.x86 > 0xf) | |
483 | *hole_offset = f10_dhar_offset(pvt->dhar); | |
484 | else | |
485 | *hole_offset = k8_dhar_offset(pvt->dhar); | |
486 | ||
487 | debugf1(" DHAR info for node %d base 0x%lx offset 0x%lx size 0x%lx\n", | |
488 | pvt->mc_node_id, (unsigned long)*hole_base, | |
489 | (unsigned long)*hole_offset, (unsigned long)*hole_size); | |
490 | ||
491 | return 0; | |
492 | } | |
493 | EXPORT_SYMBOL_GPL(amd64_get_dram_hole_info); | |
494 | ||
93c2df58 DT |
495 | /* |
496 | * Return the DramAddr that the SysAddr given by @sys_addr maps to. It is | |
497 | * assumed that sys_addr maps to the node given by mci. | |
498 | * | |
499 | * The first part of section 3.4.4 (p. 70) shows how the DRAM Base (section | |
500 | * 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers are used to translate a | |
501 | * SysAddr to a DramAddr. If the DRAM Hole Address Register (DHAR) is enabled, | |
502 | * then it is also involved in translating a SysAddr to a DramAddr. Sections | |
503 | * 3.4.8 and 3.5.8.2 describe the DHAR and how it is used for memory hoisting. | |
504 | * These parts of the documentation are unclear. I interpret them as follows: | |
505 | * | |
506 | * When node n receives a SysAddr, it processes the SysAddr as follows: | |
507 | * | |
508 | * 1. It extracts the DRAMBase and DRAMLimit values from the DRAM Base and DRAM | |
509 | * Limit registers for node n. If the SysAddr is not within the range | |
510 | * specified by the base and limit values, then node n ignores the Sysaddr | |
511 | * (since it does not map to node n). Otherwise continue to step 2 below. | |
512 | * | |
513 | * 2. If the DramHoleValid bit of the DHAR for node n is clear, the DHAR is | |
514 | * disabled so skip to step 3 below. Otherwise see if the SysAddr is within | |
515 | * the range of relocated addresses (starting at 0x100000000) from the DRAM | |
516 | * hole. If not, skip to step 3 below. Else get the value of the | |
517 | * DramHoleOffset field from the DHAR. To obtain the DramAddr, subtract the | |
518 | * offset defined by this value from the SysAddr. | |
519 | * | |
520 | * 3. Obtain the base address for node n from the DRAMBase field of the DRAM | |
521 | * Base register for node n. To obtain the DramAddr, subtract the base | |
522 | * address from the SysAddr, as shown near the start of section 3.4.4 (p.70). | |
523 | */ | |
524 | static u64 sys_addr_to_dram_addr(struct mem_ctl_info *mci, u64 sys_addr) | |
525 | { | |
526 | u64 dram_base, hole_base, hole_offset, hole_size, dram_addr; | |
527 | int ret = 0; | |
528 | ||
529 | dram_base = get_dram_base(mci); | |
530 | ||
531 | ret = amd64_get_dram_hole_info(mci, &hole_base, &hole_offset, | |
532 | &hole_size); | |
533 | if (!ret) { | |
534 | if ((sys_addr >= (1ull << 32)) && | |
535 | (sys_addr < ((1ull << 32) + hole_size))) { | |
536 | /* use DHAR to translate SysAddr to DramAddr */ | |
537 | dram_addr = sys_addr - hole_offset; | |
538 | ||
539 | debugf2("using DHAR to translate SysAddr 0x%lx to " | |
540 | "DramAddr 0x%lx\n", | |
541 | (unsigned long)sys_addr, | |
542 | (unsigned long)dram_addr); | |
543 | ||
544 | return dram_addr; | |
545 | } | |
546 | } | |
547 | ||
548 | /* | |
549 | * Translate the SysAddr to a DramAddr as shown near the start of | |
550 | * section 3.4.4 (p. 70). Although sys_addr is a 64-bit value, the k8 | |
551 | * only deals with 40-bit values. Therefore we discard bits 63-40 of | |
552 | * sys_addr below. If bit 39 of sys_addr is 1 then the bits we | |
553 | * discard are all 1s. Otherwise the bits we discard are all 0s. See | |
554 | * section 3.4.2 of AMD publication 24592: AMD x86-64 Architecture | |
555 | * Programmer's Manual Volume 1 Application Programming. | |
556 | */ | |
557 | dram_addr = (sys_addr & 0xffffffffffull) - dram_base; | |
558 | ||
559 | debugf2("using DRAM Base register to translate SysAddr 0x%lx to " | |
560 | "DramAddr 0x%lx\n", (unsigned long)sys_addr, | |
561 | (unsigned long)dram_addr); | |
562 | return dram_addr; | |
563 | } | |
564 | ||
565 | /* | |
566 | * @intlv_en is the value of the IntlvEn field from a DRAM Base register | |
567 | * (section 3.4.4.1). Return the number of bits from a SysAddr that are used | |
568 | * for node interleaving. | |
569 | */ | |
570 | static int num_node_interleave_bits(unsigned intlv_en) | |
571 | { | |
572 | static const int intlv_shift_table[] = { 0, 1, 0, 2, 0, 0, 0, 3 }; | |
573 | int n; | |
574 | ||
575 | BUG_ON(intlv_en > 7); | |
576 | n = intlv_shift_table[intlv_en]; | |
577 | return n; | |
578 | } | |
579 | ||
580 | /* Translate the DramAddr given by @dram_addr to an InputAddr. */ | |
581 | static u64 dram_addr_to_input_addr(struct mem_ctl_info *mci, u64 dram_addr) | |
582 | { | |
583 | struct amd64_pvt *pvt; | |
584 | int intlv_shift; | |
585 | u64 input_addr; | |
586 | ||
587 | pvt = mci->pvt_info; | |
588 | ||
589 | /* | |
590 | * See the start of section 3.4.4 (p. 70, BKDG #26094, K8, revA-E) | |
591 | * concerning translating a DramAddr to an InputAddr. | |
592 | */ | |
593 | intlv_shift = num_node_interleave_bits(pvt->dram_IntlvEn[0]); | |
594 | input_addr = ((dram_addr >> intlv_shift) & 0xffffff000ull) + | |
595 | (dram_addr & 0xfff); | |
596 | ||
597 | debugf2(" Intlv Shift=%d DramAddr=0x%lx maps to InputAddr=0x%lx\n", | |
598 | intlv_shift, (unsigned long)dram_addr, | |
599 | (unsigned long)input_addr); | |
600 | ||
601 | return input_addr; | |
602 | } | |
603 | ||
604 | /* | |
605 | * Translate the SysAddr represented by @sys_addr to an InputAddr. It is | |
606 | * assumed that @sys_addr maps to the node given by mci. | |
607 | */ | |
608 | static u64 sys_addr_to_input_addr(struct mem_ctl_info *mci, u64 sys_addr) | |
609 | { | |
610 | u64 input_addr; | |
611 | ||
612 | input_addr = | |
613 | dram_addr_to_input_addr(mci, sys_addr_to_dram_addr(mci, sys_addr)); | |
614 | ||
615 | debugf2("SysAdddr 0x%lx translates to InputAddr 0x%lx\n", | |
616 | (unsigned long)sys_addr, (unsigned long)input_addr); | |
617 | ||
618 | return input_addr; | |
619 | } | |
620 | ||
621 | ||
622 | /* | |
623 | * @input_addr is an InputAddr associated with the node represented by mci. | |
624 | * Translate @input_addr to a DramAddr and return the result. | |
625 | */ | |
626 | static u64 input_addr_to_dram_addr(struct mem_ctl_info *mci, u64 input_addr) | |
627 | { | |
628 | struct amd64_pvt *pvt; | |
629 | int node_id, intlv_shift; | |
630 | u64 bits, dram_addr; | |
631 | u32 intlv_sel; | |
632 | ||
633 | /* | |
634 | * Near the start of section 3.4.4 (p. 70, BKDG #26094, K8, revA-E) | |
635 | * shows how to translate a DramAddr to an InputAddr. Here we reverse | |
636 | * this procedure. When translating from a DramAddr to an InputAddr, the | |
637 | * bits used for node interleaving are discarded. Here we recover these | |
638 | * bits from the IntlvSel field of the DRAM Limit register (section | |
639 | * 3.4.4.2) for the node that input_addr is associated with. | |
640 | */ | |
641 | pvt = mci->pvt_info; | |
642 | node_id = pvt->mc_node_id; | |
643 | BUG_ON((node_id < 0) || (node_id > 7)); | |
644 | ||
645 | intlv_shift = num_node_interleave_bits(pvt->dram_IntlvEn[0]); | |
646 | ||
647 | if (intlv_shift == 0) { | |
648 | debugf1(" InputAddr 0x%lx translates to DramAddr of " | |
649 | "same value\n", (unsigned long)input_addr); | |
650 | ||
651 | return input_addr; | |
652 | } | |
653 | ||
654 | bits = ((input_addr & 0xffffff000ull) << intlv_shift) + | |
655 | (input_addr & 0xfff); | |
656 | ||
657 | intlv_sel = pvt->dram_IntlvSel[node_id] & ((1 << intlv_shift) - 1); | |
658 | dram_addr = bits + (intlv_sel << 12); | |
659 | ||
660 | debugf1("InputAddr 0x%lx translates to DramAddr 0x%lx " | |
661 | "(%d node interleave bits)\n", (unsigned long)input_addr, | |
662 | (unsigned long)dram_addr, intlv_shift); | |
663 | ||
664 | return dram_addr; | |
665 | } | |
666 | ||
667 | /* | |
668 | * @dram_addr is a DramAddr that maps to the node represented by mci. Convert | |
669 | * @dram_addr to a SysAddr. | |
670 | */ | |
671 | static u64 dram_addr_to_sys_addr(struct mem_ctl_info *mci, u64 dram_addr) | |
672 | { | |
673 | struct amd64_pvt *pvt = mci->pvt_info; | |
674 | u64 hole_base, hole_offset, hole_size, base, limit, sys_addr; | |
675 | int ret = 0; | |
676 | ||
677 | ret = amd64_get_dram_hole_info(mci, &hole_base, &hole_offset, | |
678 | &hole_size); | |
679 | if (!ret) { | |
680 | if ((dram_addr >= hole_base) && | |
681 | (dram_addr < (hole_base + hole_size))) { | |
682 | sys_addr = dram_addr + hole_offset; | |
683 | ||
684 | debugf1("using DHAR to translate DramAddr 0x%lx to " | |
685 | "SysAddr 0x%lx\n", (unsigned long)dram_addr, | |
686 | (unsigned long)sys_addr); | |
687 | ||
688 | return sys_addr; | |
689 | } | |
690 | } | |
691 | ||
692 | amd64_get_base_and_limit(pvt, pvt->mc_node_id, &base, &limit); | |
693 | sys_addr = dram_addr + base; | |
694 | ||
695 | /* | |
696 | * The sys_addr we have computed up to this point is a 40-bit value | |
697 | * because the k8 deals with 40-bit values. However, the value we are | |
698 | * supposed to return is a full 64-bit physical address. The AMD | |
699 | * x86-64 architecture specifies that the most significant implemented | |
700 | * address bit through bit 63 of a physical address must be either all | |
701 | * 0s or all 1s. Therefore we sign-extend the 40-bit sys_addr to a | |
702 | * 64-bit value below. See section 3.4.2 of AMD publication 24592: | |
703 | * AMD x86-64 Architecture Programmer's Manual Volume 1 Application | |
704 | * Programming. | |
705 | */ | |
706 | sys_addr |= ~((sys_addr & (1ull << 39)) - 1); | |
707 | ||
708 | debugf1(" Node %d, DramAddr 0x%lx to SysAddr 0x%lx\n", | |
709 | pvt->mc_node_id, (unsigned long)dram_addr, | |
710 | (unsigned long)sys_addr); | |
711 | ||
712 | return sys_addr; | |
713 | } | |
714 | ||
715 | /* | |
716 | * @input_addr is an InputAddr associated with the node given by mci. Translate | |
717 | * @input_addr to a SysAddr. | |
718 | */ | |
719 | static inline u64 input_addr_to_sys_addr(struct mem_ctl_info *mci, | |
720 | u64 input_addr) | |
721 | { | |
722 | return dram_addr_to_sys_addr(mci, | |
723 | input_addr_to_dram_addr(mci, input_addr)); | |
724 | } | |
725 | ||
726 | /* | |
727 | * Find the minimum and maximum InputAddr values that map to the given @csrow. | |
728 | * Pass back these values in *input_addr_min and *input_addr_max. | |
729 | */ | |
730 | static void find_csrow_limits(struct mem_ctl_info *mci, int csrow, | |
731 | u64 *input_addr_min, u64 *input_addr_max) | |
732 | { | |
733 | struct amd64_pvt *pvt; | |
734 | u64 base, mask; | |
735 | ||
736 | pvt = mci->pvt_info; | |
9d858bb1 | 737 | BUG_ON((csrow < 0) || (csrow >= pvt->cs_count)); |
93c2df58 DT |
738 | |
739 | base = base_from_dct_base(pvt, csrow); | |
740 | mask = mask_from_dct_mask(pvt, csrow); | |
741 | ||
742 | *input_addr_min = base & ~mask; | |
743 | *input_addr_max = base | mask | pvt->dcs_mask_notused; | |
744 | } | |
745 | ||
746 | /* | |
747 | * Extract error address from MCA NB Address Low (section 3.6.4.5) and MCA NB | |
748 | * Address High (section 3.6.4.6) register values and return the result. Address | |
749 | * is located in the info structure (nbeah and nbeal), the encoding is device | |
750 | * specific. | |
751 | */ | |
752 | static u64 extract_error_address(struct mem_ctl_info *mci, | |
ef44cc4c | 753 | struct err_regs *info) |
93c2df58 DT |
754 | { |
755 | struct amd64_pvt *pvt = mci->pvt_info; | |
756 | ||
757 | return pvt->ops->get_error_address(mci, info); | |
758 | } | |
759 | ||
760 | ||
761 | /* Map the Error address to a PAGE and PAGE OFFSET. */ | |
762 | static inline void error_address_to_page_and_offset(u64 error_address, | |
763 | u32 *page, u32 *offset) | |
764 | { | |
765 | *page = (u32) (error_address >> PAGE_SHIFT); | |
766 | *offset = ((u32) error_address) & ~PAGE_MASK; | |
767 | } | |
768 | ||
769 | /* | |
770 | * @sys_addr is an error address (a SysAddr) extracted from the MCA NB Address | |
771 | * Low (section 3.6.4.5) and MCA NB Address High (section 3.6.4.6) registers | |
772 | * of a node that detected an ECC memory error. mci represents the node that | |
773 | * the error address maps to (possibly different from the node that detected | |
774 | * the error). Return the number of the csrow that sys_addr maps to, or -1 on | |
775 | * error. | |
776 | */ | |
777 | static int sys_addr_to_csrow(struct mem_ctl_info *mci, u64 sys_addr) | |
778 | { | |
779 | int csrow; | |
780 | ||
781 | csrow = input_addr_to_csrow(mci, sys_addr_to_input_addr(mci, sys_addr)); | |
782 | ||
783 | if (csrow == -1) | |
784 | amd64_mc_printk(mci, KERN_ERR, | |
785 | "Failed to translate InputAddr to csrow for " | |
786 | "address 0x%lx\n", (unsigned long)sys_addr); | |
787 | return csrow; | |
788 | } | |
e2ce7255 | 789 | |
2da11654 DT |
790 | static int get_channel_from_ecc_syndrome(unsigned short syndrome); |
791 | ||
792 | static void amd64_cpu_display_info(struct amd64_pvt *pvt) | |
793 | { | |
794 | if (boot_cpu_data.x86 == 0x11) | |
795 | edac_printk(KERN_DEBUG, EDAC_MC, "F11h CPU detected\n"); | |
796 | else if (boot_cpu_data.x86 == 0x10) | |
797 | edac_printk(KERN_DEBUG, EDAC_MC, "F10h CPU detected\n"); | |
798 | else if (boot_cpu_data.x86 == 0xf) | |
799 | edac_printk(KERN_DEBUG, EDAC_MC, "%s detected\n", | |
800 | (pvt->ext_model >= OPTERON_CPU_REV_F) ? | |
801 | "Rev F or later" : "Rev E or earlier"); | |
802 | else | |
803 | /* we'll hardly ever ever get here */ | |
804 | edac_printk(KERN_ERR, EDAC_MC, "Unknown cpu!\n"); | |
805 | } | |
806 | ||
807 | /* | |
808 | * Determine if the DIMMs have ECC enabled. ECC is enabled ONLY if all the DIMMs | |
809 | * are ECC capable. | |
810 | */ | |
811 | static enum edac_type amd64_determine_edac_cap(struct amd64_pvt *pvt) | |
812 | { | |
813 | int bit; | |
584fcff4 | 814 | enum dev_type edac_cap = EDAC_FLAG_NONE; |
2da11654 DT |
815 | |
816 | bit = (boot_cpu_data.x86 > 0xf || pvt->ext_model >= OPTERON_CPU_REV_F) | |
817 | ? 19 | |
818 | : 17; | |
819 | ||
584fcff4 | 820 | if (pvt->dclr0 & BIT(bit)) |
2da11654 DT |
821 | edac_cap = EDAC_FLAG_SECDED; |
822 | ||
823 | return edac_cap; | |
824 | } | |
825 | ||
826 | ||
827 | static void f10_debug_display_dimm_sizes(int ctrl, struct amd64_pvt *pvt, | |
828 | int ganged); | |
829 | ||
830 | /* Display and decode various NB registers for debug purposes. */ | |
831 | static void amd64_dump_misc_regs(struct amd64_pvt *pvt) | |
832 | { | |
833 | int ganged; | |
834 | ||
835 | debugf1(" nbcap:0x%8.08x DctDualCap=%s DualNode=%s 8-Node=%s\n", | |
836 | pvt->nbcap, | |
837 | (pvt->nbcap & K8_NBCAP_DCT_DUAL) ? "True" : "False", | |
838 | (pvt->nbcap & K8_NBCAP_DUAL_NODE) ? "True" : "False", | |
839 | (pvt->nbcap & K8_NBCAP_8_NODE) ? "True" : "False"); | |
840 | debugf1(" ECC Capable=%s ChipKill Capable=%s\n", | |
841 | (pvt->nbcap & K8_NBCAP_SECDED) ? "True" : "False", | |
842 | (pvt->nbcap & K8_NBCAP_CHIPKILL) ? "True" : "False"); | |
843 | debugf1(" DramCfg0-low=0x%08x DIMM-ECC=%s Parity=%s Width=%s\n", | |
844 | pvt->dclr0, | |
845 | (pvt->dclr0 & BIT(19)) ? "Enabled" : "Disabled", | |
846 | (pvt->dclr0 & BIT(8)) ? "Enabled" : "Disabled", | |
847 | (pvt->dclr0 & BIT(11)) ? "128b" : "64b"); | |
848 | debugf1(" DIMM x4 Present: L0=%s L1=%s L2=%s L3=%s DIMM Type=%s\n", | |
849 | (pvt->dclr0 & BIT(12)) ? "Y" : "N", | |
850 | (pvt->dclr0 & BIT(13)) ? "Y" : "N", | |
851 | (pvt->dclr0 & BIT(14)) ? "Y" : "N", | |
852 | (pvt->dclr0 & BIT(15)) ? "Y" : "N", | |
853 | (pvt->dclr0 & BIT(16)) ? "UN-Buffered" : "Buffered"); | |
854 | ||
855 | ||
856 | debugf1(" online-spare: 0x%8.08x\n", pvt->online_spare); | |
857 | ||
858 | if (boot_cpu_data.x86 == 0xf) { | |
859 | debugf1(" dhar: 0x%8.08x Base=0x%08x Offset=0x%08x\n", | |
860 | pvt->dhar, dhar_base(pvt->dhar), | |
861 | k8_dhar_offset(pvt->dhar)); | |
862 | debugf1(" DramHoleValid=%s\n", | |
863 | (pvt->dhar & DHAR_VALID) ? "True" : "False"); | |
864 | ||
865 | debugf1(" dbam-dkt: 0x%8.08x\n", pvt->dbam0); | |
866 | ||
867 | /* everything below this point is Fam10h and above */ | |
868 | return; | |
869 | ||
870 | } else { | |
871 | debugf1(" dhar: 0x%8.08x Base=0x%08x Offset=0x%08x\n", | |
872 | pvt->dhar, dhar_base(pvt->dhar), | |
873 | f10_dhar_offset(pvt->dhar)); | |
874 | debugf1(" DramMemHoistValid=%s DramHoleValid=%s\n", | |
875 | (pvt->dhar & F10_DRAM_MEM_HOIST_VALID) ? | |
876 | "True" : "False", | |
877 | (pvt->dhar & DHAR_VALID) ? | |
878 | "True" : "False"); | |
879 | } | |
880 | ||
881 | /* Only if NOT ganged does dcl1 have valid info */ | |
882 | if (!dct_ganging_enabled(pvt)) { | |
883 | debugf1(" DramCfg1-low=0x%08x DIMM-ECC=%s Parity=%s " | |
884 | "Width=%s\n", pvt->dclr1, | |
885 | (pvt->dclr1 & BIT(19)) ? "Enabled" : "Disabled", | |
886 | (pvt->dclr1 & BIT(8)) ? "Enabled" : "Disabled", | |
887 | (pvt->dclr1 & BIT(11)) ? "128b" : "64b"); | |
888 | debugf1(" DIMM x4 Present: L0=%s L1=%s L2=%s L3=%s " | |
889 | "DIMM Type=%s\n", | |
890 | (pvt->dclr1 & BIT(12)) ? "Y" : "N", | |
891 | (pvt->dclr1 & BIT(13)) ? "Y" : "N", | |
892 | (pvt->dclr1 & BIT(14)) ? "Y" : "N", | |
893 | (pvt->dclr1 & BIT(15)) ? "Y" : "N", | |
894 | (pvt->dclr1 & BIT(16)) ? "UN-Buffered" : "Buffered"); | |
895 | } | |
896 | ||
897 | /* | |
898 | * Determine if ganged and then dump memory sizes for first controller, | |
899 | * and if NOT ganged dump info for 2nd controller. | |
900 | */ | |
901 | ganged = dct_ganging_enabled(pvt); | |
902 | ||
903 | f10_debug_display_dimm_sizes(0, pvt, ganged); | |
904 | ||
905 | if (!ganged) | |
906 | f10_debug_display_dimm_sizes(1, pvt, ganged); | |
907 | } | |
908 | ||
909 | /* Read in both of DBAM registers */ | |
910 | static void amd64_read_dbam_reg(struct amd64_pvt *pvt) | |
911 | { | |
912 | int err = 0; | |
913 | unsigned int reg; | |
914 | ||
915 | reg = DBAM0; | |
916 | err = pci_read_config_dword(pvt->dram_f2_ctl, reg, &pvt->dbam0); | |
917 | if (err) | |
918 | goto err_reg; | |
919 | ||
920 | if (boot_cpu_data.x86 >= 0x10) { | |
921 | reg = DBAM1; | |
922 | err = pci_read_config_dword(pvt->dram_f2_ctl, reg, &pvt->dbam1); | |
923 | ||
924 | if (err) | |
925 | goto err_reg; | |
926 | } | |
927 | ||
c2718348 DT |
928 | return; |
929 | ||
2da11654 DT |
930 | err_reg: |
931 | debugf0("Error reading F2x%03x.\n", reg); | |
932 | } | |
933 | ||
94be4bff DT |
934 | /* |
935 | * NOTE: CPU Revision Dependent code: Rev E and Rev F | |
936 | * | |
937 | * Set the DCSB and DCSM mask values depending on the CPU revision value. Also | |
938 | * set the shift factor for the DCSB and DCSM values. | |
939 | * | |
940 | * ->dcs_mask_notused, RevE: | |
941 | * | |
942 | * To find the max InputAddr for the csrow, start with the base address and set | |
943 | * all bits that are "don't care" bits in the test at the start of section | |
944 | * 3.5.4 (p. 84). | |
945 | * | |
946 | * The "don't care" bits are all set bits in the mask and all bits in the gaps | |
947 | * between bit ranges [35:25] and [19:13]. The value REV_E_DCS_NOTUSED_BITS | |
948 | * represents bits [24:20] and [12:0], which are all bits in the above-mentioned | |
949 | * gaps. | |
950 | * | |
951 | * ->dcs_mask_notused, RevF and later: | |
952 | * | |
953 | * To find the max InputAddr for the csrow, start with the base address and set | |
954 | * all bits that are "don't care" bits in the test at the start of NPT section | |
955 | * 4.5.4 (p. 87). | |
956 | * | |
957 | * The "don't care" bits are all set bits in the mask and all bits in the gaps | |
958 | * between bit ranges [36:27] and [21:13]. | |
959 | * | |
960 | * The value REV_F_F1Xh_DCS_NOTUSED_BITS represents bits [26:22] and [12:0], | |
961 | * which are all bits in the above-mentioned gaps. | |
962 | */ | |
963 | static void amd64_set_dct_base_and_mask(struct amd64_pvt *pvt) | |
964 | { | |
9d858bb1 BP |
965 | |
966 | if (boot_cpu_data.x86 == 0xf && pvt->ext_model < OPTERON_CPU_REV_F) { | |
967 | pvt->dcsb_base = REV_E_DCSB_BASE_BITS; | |
968 | pvt->dcsm_mask = REV_E_DCSM_MASK_BITS; | |
969 | pvt->dcs_mask_notused = REV_E_DCS_NOTUSED_BITS; | |
970 | pvt->dcs_shift = REV_E_DCS_SHIFT; | |
971 | pvt->cs_count = 8; | |
972 | pvt->num_dcsm = 8; | |
973 | } else { | |
94be4bff DT |
974 | pvt->dcsb_base = REV_F_F1Xh_DCSB_BASE_BITS; |
975 | pvt->dcsm_mask = REV_F_F1Xh_DCSM_MASK_BITS; | |
976 | pvt->dcs_mask_notused = REV_F_F1Xh_DCS_NOTUSED_BITS; | |
977 | pvt->dcs_shift = REV_F_F1Xh_DCS_SHIFT; | |
978 | ||
9d858bb1 BP |
979 | if (boot_cpu_data.x86 == 0x11) { |
980 | pvt->cs_count = 4; | |
981 | pvt->num_dcsm = 2; | |
982 | } else { | |
983 | pvt->cs_count = 8; | |
984 | pvt->num_dcsm = 4; | |
94be4bff | 985 | } |
94be4bff DT |
986 | } |
987 | } | |
988 | ||
989 | /* | |
990 | * Function 2 Offset F10_DCSB0; read in the DCS Base and DCS Mask hw registers | |
991 | */ | |
992 | static void amd64_read_dct_base_mask(struct amd64_pvt *pvt) | |
993 | { | |
994 | int cs, reg, err = 0; | |
995 | ||
996 | amd64_set_dct_base_and_mask(pvt); | |
997 | ||
9d858bb1 | 998 | for (cs = 0; cs < pvt->cs_count; cs++) { |
94be4bff DT |
999 | reg = K8_DCSB0 + (cs * 4); |
1000 | err = pci_read_config_dword(pvt->dram_f2_ctl, reg, | |
1001 | &pvt->dcsb0[cs]); | |
1002 | if (unlikely(err)) | |
1003 | debugf0("Reading K8_DCSB0[%d] failed\n", cs); | |
1004 | else | |
1005 | debugf0(" DCSB0[%d]=0x%08x reg: F2x%x\n", | |
1006 | cs, pvt->dcsb0[cs], reg); | |
1007 | ||
1008 | /* If DCT are NOT ganged, then read in DCT1's base */ | |
1009 | if (boot_cpu_data.x86 >= 0x10 && !dct_ganging_enabled(pvt)) { | |
1010 | reg = F10_DCSB1 + (cs * 4); | |
1011 | err = pci_read_config_dword(pvt->dram_f2_ctl, reg, | |
1012 | &pvt->dcsb1[cs]); | |
1013 | if (unlikely(err)) | |
1014 | debugf0("Reading F10_DCSB1[%d] failed\n", cs); | |
1015 | else | |
1016 | debugf0(" DCSB1[%d]=0x%08x reg: F2x%x\n", | |
1017 | cs, pvt->dcsb1[cs], reg); | |
1018 | } else { | |
1019 | pvt->dcsb1[cs] = 0; | |
1020 | } | |
1021 | } | |
1022 | ||
1023 | for (cs = 0; cs < pvt->num_dcsm; cs++) { | |
4afcd2dc | 1024 | reg = K8_DCSM0 + (cs * 4); |
94be4bff DT |
1025 | err = pci_read_config_dword(pvt->dram_f2_ctl, reg, |
1026 | &pvt->dcsm0[cs]); | |
1027 | if (unlikely(err)) | |
1028 | debugf0("Reading K8_DCSM0 failed\n"); | |
1029 | else | |
1030 | debugf0(" DCSM0[%d]=0x%08x reg: F2x%x\n", | |
1031 | cs, pvt->dcsm0[cs], reg); | |
1032 | ||
1033 | /* If DCT are NOT ganged, then read in DCT1's mask */ | |
1034 | if (boot_cpu_data.x86 >= 0x10 && !dct_ganging_enabled(pvt)) { | |
1035 | reg = F10_DCSM1 + (cs * 4); | |
1036 | err = pci_read_config_dword(pvt->dram_f2_ctl, reg, | |
1037 | &pvt->dcsm1[cs]); | |
1038 | if (unlikely(err)) | |
1039 | debugf0("Reading F10_DCSM1[%d] failed\n", cs); | |
1040 | else | |
1041 | debugf0(" DCSM1[%d]=0x%08x reg: F2x%x\n", | |
1042 | cs, pvt->dcsm1[cs], reg); | |
1043 | } else | |
1044 | pvt->dcsm1[cs] = 0; | |
1045 | } | |
1046 | } | |
1047 | ||
1048 | static enum mem_type amd64_determine_memory_type(struct amd64_pvt *pvt) | |
1049 | { | |
1050 | enum mem_type type; | |
1051 | ||
1052 | if (boot_cpu_data.x86 >= 0x10 || pvt->ext_model >= OPTERON_CPU_REV_F) { | |
1053 | /* Rev F and later */ | |
1054 | type = (pvt->dclr0 & BIT(16)) ? MEM_DDR2 : MEM_RDDR2; | |
1055 | } else { | |
1056 | /* Rev E and earlier */ | |
1057 | type = (pvt->dclr0 & BIT(18)) ? MEM_DDR : MEM_RDDR; | |
1058 | } | |
1059 | ||
1060 | debugf1(" Memory type is: %s\n", | |
1061 | (type == MEM_DDR2) ? "MEM_DDR2" : | |
1062 | (type == MEM_RDDR2) ? "MEM_RDDR2" : | |
1063 | (type == MEM_DDR) ? "MEM_DDR" : "MEM_RDDR"); | |
1064 | ||
1065 | return type; | |
1066 | } | |
1067 | ||
ddff876d DT |
1068 | /* |
1069 | * Read the DRAM Configuration Low register. It differs between CG, D & E revs | |
1070 | * and the later RevF memory controllers (DDR vs DDR2) | |
1071 | * | |
1072 | * Return: | |
1073 | * number of memory channels in operation | |
1074 | * Pass back: | |
1075 | * contents of the DCL0_LOW register | |
1076 | */ | |
1077 | static int k8_early_channel_count(struct amd64_pvt *pvt) | |
1078 | { | |
1079 | int flag, err = 0; | |
1080 | ||
1081 | err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCLR_0, &pvt->dclr0); | |
1082 | if (err) | |
1083 | return err; | |
1084 | ||
1085 | if ((boot_cpu_data.x86_model >> 4) >= OPTERON_CPU_REV_F) { | |
1086 | /* RevF (NPT) and later */ | |
1087 | flag = pvt->dclr0 & F10_WIDTH_128; | |
1088 | } else { | |
1089 | /* RevE and earlier */ | |
1090 | flag = pvt->dclr0 & REVE_WIDTH_128; | |
1091 | } | |
1092 | ||
1093 | /* not used */ | |
1094 | pvt->dclr1 = 0; | |
1095 | ||
1096 | return (flag) ? 2 : 1; | |
1097 | } | |
1098 | ||
1099 | /* extract the ERROR ADDRESS for the K8 CPUs */ | |
1100 | static u64 k8_get_error_address(struct mem_ctl_info *mci, | |
ef44cc4c | 1101 | struct err_regs *info) |
ddff876d DT |
1102 | { |
1103 | return (((u64) (info->nbeah & 0xff)) << 32) + | |
1104 | (info->nbeal & ~0x03); | |
1105 | } | |
1106 | ||
1107 | /* | |
1108 | * Read the Base and Limit registers for K8 based Memory controllers; extract | |
1109 | * fields from the 'raw' reg into separate data fields | |
1110 | * | |
1111 | * Isolates: BASE, LIMIT, IntlvEn, IntlvSel, RW_EN | |
1112 | */ | |
1113 | static void k8_read_dram_base_limit(struct amd64_pvt *pvt, int dram) | |
1114 | { | |
1115 | u32 low; | |
1116 | u32 off = dram << 3; /* 8 bytes between DRAM entries */ | |
1117 | int err; | |
1118 | ||
1119 | err = pci_read_config_dword(pvt->addr_f1_ctl, | |
1120 | K8_DRAM_BASE_LOW + off, &low); | |
1121 | if (err) | |
1122 | debugf0("Reading K8_DRAM_BASE_LOW failed\n"); | |
1123 | ||
1124 | /* Extract parts into separate data entries */ | |
4997811e | 1125 | pvt->dram_base[dram] = ((u64) low & 0xFFFF0000) << 8; |
ddff876d DT |
1126 | pvt->dram_IntlvEn[dram] = (low >> 8) & 0x7; |
1127 | pvt->dram_rw_en[dram] = (low & 0x3); | |
1128 | ||
1129 | err = pci_read_config_dword(pvt->addr_f1_ctl, | |
1130 | K8_DRAM_LIMIT_LOW + off, &low); | |
1131 | if (err) | |
1132 | debugf0("Reading K8_DRAM_LIMIT_LOW failed\n"); | |
1133 | ||
1134 | /* | |
1135 | * Extract parts into separate data entries. Limit is the HIGHEST memory | |
1136 | * location of the region, so lower 24 bits need to be all ones | |
1137 | */ | |
4997811e | 1138 | pvt->dram_limit[dram] = (((u64) low & 0xFFFF0000) << 8) | 0x00FFFFFF; |
ddff876d DT |
1139 | pvt->dram_IntlvSel[dram] = (low >> 8) & 0x7; |
1140 | pvt->dram_DstNode[dram] = (low & 0x7); | |
1141 | } | |
1142 | ||
1143 | static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci, | |
ef44cc4c | 1144 | struct err_regs *info, |
ddff876d DT |
1145 | u64 SystemAddress) |
1146 | { | |
1147 | struct mem_ctl_info *src_mci; | |
1148 | unsigned short syndrome; | |
1149 | int channel, csrow; | |
1150 | u32 page, offset; | |
1151 | ||
1152 | /* Extract the syndrome parts and form a 16-bit syndrome */ | |
b70ef010 BP |
1153 | syndrome = HIGH_SYNDROME(info->nbsl) << 8; |
1154 | syndrome |= LOW_SYNDROME(info->nbsh); | |
ddff876d DT |
1155 | |
1156 | /* CHIPKILL enabled */ | |
1157 | if (info->nbcfg & K8_NBCFG_CHIPKILL) { | |
1158 | channel = get_channel_from_ecc_syndrome(syndrome); | |
1159 | if (channel < 0) { | |
1160 | /* | |
1161 | * Syndrome didn't map, so we don't know which of the | |
1162 | * 2 DIMMs is in error. So we need to ID 'both' of them | |
1163 | * as suspect. | |
1164 | */ | |
1165 | amd64_mc_printk(mci, KERN_WARNING, | |
1166 | "unknown syndrome 0x%x - possible error " | |
1167 | "reporting race\n", syndrome); | |
1168 | edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR); | |
1169 | return; | |
1170 | } | |
1171 | } else { | |
1172 | /* | |
1173 | * non-chipkill ecc mode | |
1174 | * | |
1175 | * The k8 documentation is unclear about how to determine the | |
1176 | * channel number when using non-chipkill memory. This method | |
1177 | * was obtained from email communication with someone at AMD. | |
1178 | * (Wish the email was placed in this comment - norsk) | |
1179 | */ | |
1180 | channel = ((SystemAddress & BIT(3)) != 0); | |
1181 | } | |
1182 | ||
1183 | /* | |
1184 | * Find out which node the error address belongs to. This may be | |
1185 | * different from the node that detected the error. | |
1186 | */ | |
1187 | src_mci = find_mc_by_sys_addr(mci, SystemAddress); | |
2cff18c2 | 1188 | if (!src_mci) { |
ddff876d DT |
1189 | amd64_mc_printk(mci, KERN_ERR, |
1190 | "failed to map error address 0x%lx to a node\n", | |
1191 | (unsigned long)SystemAddress); | |
1192 | edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR); | |
1193 | return; | |
1194 | } | |
1195 | ||
1196 | /* Now map the SystemAddress to a CSROW */ | |
1197 | csrow = sys_addr_to_csrow(src_mci, SystemAddress); | |
1198 | if (csrow < 0) { | |
1199 | edac_mc_handle_ce_no_info(src_mci, EDAC_MOD_STR); | |
1200 | } else { | |
1201 | error_address_to_page_and_offset(SystemAddress, &page, &offset); | |
1202 | ||
1203 | edac_mc_handle_ce(src_mci, page, offset, syndrome, csrow, | |
1204 | channel, EDAC_MOD_STR); | |
1205 | } | |
1206 | } | |
1207 | ||
1208 | /* | |
1209 | * determrine the number of PAGES in for this DIMM's size based on its DRAM | |
1210 | * Address Mapping. | |
1211 | * | |
1212 | * First step is to calc the number of bits to shift a value of 1 left to | |
1213 | * indicate show many pages. Start with the DBAM value as the starting bits, | |
1214 | * then proceed to adjust those shift bits, based on CPU rev and the table. | |
1215 | * See BKDG on the DBAM | |
1216 | */ | |
1217 | static int k8_dbam_map_to_pages(struct amd64_pvt *pvt, int dram_map) | |
1218 | { | |
1219 | int nr_pages; | |
1220 | ||
1221 | if (pvt->ext_model >= OPTERON_CPU_REV_F) { | |
1222 | nr_pages = 1 << (revf_quad_ddr2_shift[dram_map] - PAGE_SHIFT); | |
1223 | } else { | |
1224 | /* | |
1225 | * RevE and less section; this line is tricky. It collapses the | |
1226 | * table used by RevD and later to one that matches revisions CG | |
1227 | * and earlier. | |
1228 | */ | |
1229 | dram_map -= (pvt->ext_model >= OPTERON_CPU_REV_D) ? | |
1230 | (dram_map > 8 ? 4 : (dram_map > 5 ? | |
1231 | 3 : (dram_map > 2 ? 1 : 0))) : 0; | |
1232 | ||
1233 | /* 25 shift is 32MiB minimum DIMM size in RevE and prior */ | |
1234 | nr_pages = 1 << (dram_map + 25 - PAGE_SHIFT); | |
1235 | } | |
1236 | ||
1237 | return nr_pages; | |
1238 | } | |
1239 | ||
1afd3c98 DT |
1240 | /* |
1241 | * Get the number of DCT channels in use. | |
1242 | * | |
1243 | * Return: | |
1244 | * number of Memory Channels in operation | |
1245 | * Pass back: | |
1246 | * contents of the DCL0_LOW register | |
1247 | */ | |
1248 | static int f10_early_channel_count(struct amd64_pvt *pvt) | |
1249 | { | |
57a30854 | 1250 | int dbams[] = { DBAM0, DBAM1 }; |
1afd3c98 | 1251 | int err = 0, channels = 0; |
57a30854 | 1252 | int i, j; |
1afd3c98 DT |
1253 | u32 dbam; |
1254 | ||
1255 | err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCLR_0, &pvt->dclr0); | |
1256 | if (err) | |
1257 | goto err_reg; | |
1258 | ||
1259 | err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCLR_1, &pvt->dclr1); | |
1260 | if (err) | |
1261 | goto err_reg; | |
1262 | ||
1263 | /* If we are in 128 bit mode, then we are using 2 channels */ | |
1264 | if (pvt->dclr0 & F10_WIDTH_128) { | |
1265 | debugf0("Data WIDTH is 128 bits - 2 channels\n"); | |
1266 | channels = 2; | |
1267 | return channels; | |
1268 | } | |
1269 | ||
1270 | /* | |
1271 | * Need to check if in UN-ganged mode: In such, there are 2 channels, | |
1272 | * but they are NOT in 128 bit mode and thus the above 'dcl0' status bit | |
1273 | * will be OFF. | |
1274 | * | |
1275 | * Need to check DCT0[0] and DCT1[0] to see if only one of them has | |
1276 | * their CSEnable bit on. If so, then SINGLE DIMM case. | |
1277 | */ | |
1278 | debugf0("Data WIDTH is NOT 128 bits - need more decoding\n"); | |
ddff876d | 1279 | |
1afd3c98 DT |
1280 | /* |
1281 | * Check DRAM Bank Address Mapping values for each DIMM to see if there | |
1282 | * is more than just one DIMM present in unganged mode. Need to check | |
1283 | * both controllers since DIMMs can be placed in either one. | |
1284 | */ | |
57a30854 WW |
1285 | for (i = 0; i < ARRAY_SIZE(dbams); i++) { |
1286 | err = pci_read_config_dword(pvt->dram_f2_ctl, dbams[i], &dbam); | |
1afd3c98 DT |
1287 | if (err) |
1288 | goto err_reg; | |
1289 | ||
57a30854 WW |
1290 | for (j = 0; j < 4; j++) { |
1291 | if (DBAM_DIMM(j, dbam) > 0) { | |
1292 | channels++; | |
1293 | break; | |
1294 | } | |
1295 | } | |
1afd3c98 DT |
1296 | } |
1297 | ||
37da0450 | 1298 | debugf0("MCT channel count: %d\n", channels); |
1afd3c98 DT |
1299 | |
1300 | return channels; | |
1301 | ||
1302 | err_reg: | |
1303 | return -1; | |
1304 | ||
1305 | } | |
1306 | ||
1307 | static int f10_dbam_map_to_pages(struct amd64_pvt *pvt, int dram_map) | |
1308 | { | |
1309 | return 1 << (revf_quad_ddr2_shift[dram_map] - PAGE_SHIFT); | |
1310 | } | |
1311 | ||
1312 | /* Enable extended configuration access via 0xCF8 feature */ | |
1313 | static void amd64_setup(struct amd64_pvt *pvt) | |
1314 | { | |
1315 | u32 reg; | |
1316 | ||
1317 | pci_read_config_dword(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, ®); | |
1318 | ||
1319 | pvt->flags.cf8_extcfg = !!(reg & F10_NB_CFG_LOW_ENABLE_EXT_CFG); | |
1320 | reg |= F10_NB_CFG_LOW_ENABLE_EXT_CFG; | |
1321 | pci_write_config_dword(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, reg); | |
1322 | } | |
1323 | ||
1324 | /* Restore the extended configuration access via 0xCF8 feature */ | |
1325 | static void amd64_teardown(struct amd64_pvt *pvt) | |
1326 | { | |
1327 | u32 reg; | |
1328 | ||
1329 | pci_read_config_dword(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, ®); | |
1330 | ||
1331 | reg &= ~F10_NB_CFG_LOW_ENABLE_EXT_CFG; | |
1332 | if (pvt->flags.cf8_extcfg) | |
1333 | reg |= F10_NB_CFG_LOW_ENABLE_EXT_CFG; | |
1334 | pci_write_config_dword(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, reg); | |
1335 | } | |
1336 | ||
1337 | static u64 f10_get_error_address(struct mem_ctl_info *mci, | |
ef44cc4c | 1338 | struct err_regs *info) |
1afd3c98 DT |
1339 | { |
1340 | return (((u64) (info->nbeah & 0xffff)) << 32) + | |
1341 | (info->nbeal & ~0x01); | |
1342 | } | |
1343 | ||
1344 | /* | |
1345 | * Read the Base and Limit registers for F10 based Memory controllers. Extract | |
1346 | * fields from the 'raw' reg into separate data fields. | |
1347 | * | |
1348 | * Isolates: BASE, LIMIT, IntlvEn, IntlvSel, RW_EN. | |
1349 | */ | |
1350 | static void f10_read_dram_base_limit(struct amd64_pvt *pvt, int dram) | |
1351 | { | |
1352 | u32 high_offset, low_offset, high_base, low_base, high_limit, low_limit; | |
1353 | ||
1354 | low_offset = K8_DRAM_BASE_LOW + (dram << 3); | |
1355 | high_offset = F10_DRAM_BASE_HIGH + (dram << 3); | |
1356 | ||
1357 | /* read the 'raw' DRAM BASE Address register */ | |
1358 | pci_read_config_dword(pvt->addr_f1_ctl, low_offset, &low_base); | |
1359 | ||
1360 | /* Read from the ECS data register */ | |
1361 | pci_read_config_dword(pvt->addr_f1_ctl, high_offset, &high_base); | |
1362 | ||
1363 | /* Extract parts into separate data entries */ | |
1364 | pvt->dram_rw_en[dram] = (low_base & 0x3); | |
1365 | ||
1366 | if (pvt->dram_rw_en[dram] == 0) | |
1367 | return; | |
1368 | ||
1369 | pvt->dram_IntlvEn[dram] = (low_base >> 8) & 0x7; | |
1370 | ||
66216a7a | 1371 | pvt->dram_base[dram] = (((u64)high_base & 0x000000FF) << 40) | |
4997811e | 1372 | (((u64)low_base & 0xFFFF0000) << 8); |
1afd3c98 DT |
1373 | |
1374 | low_offset = K8_DRAM_LIMIT_LOW + (dram << 3); | |
1375 | high_offset = F10_DRAM_LIMIT_HIGH + (dram << 3); | |
1376 | ||
1377 | /* read the 'raw' LIMIT registers */ | |
1378 | pci_read_config_dword(pvt->addr_f1_ctl, low_offset, &low_limit); | |
1379 | ||
1380 | /* Read from the ECS data register for the HIGH portion */ | |
1381 | pci_read_config_dword(pvt->addr_f1_ctl, high_offset, &high_limit); | |
1382 | ||
1383 | debugf0(" HW Regs: BASE=0x%08x-%08x LIMIT= 0x%08x-%08x\n", | |
1384 | high_base, low_base, high_limit, low_limit); | |
1385 | ||
1386 | pvt->dram_DstNode[dram] = (low_limit & 0x7); | |
1387 | pvt->dram_IntlvSel[dram] = (low_limit >> 8) & 0x7; | |
1388 | ||
1389 | /* | |
1390 | * Extract address values and form a LIMIT address. Limit is the HIGHEST | |
1391 | * memory location of the region, so low 24 bits need to be all ones. | |
1392 | */ | |
66216a7a | 1393 | pvt->dram_limit[dram] = (((u64)high_limit & 0x000000FF) << 40) | |
4997811e | 1394 | (((u64) low_limit & 0xFFFF0000) << 8) | |
66216a7a | 1395 | 0x00FFFFFF; |
1afd3c98 | 1396 | } |
6163b5d4 DT |
1397 | |
1398 | static void f10_read_dram_ctl_register(struct amd64_pvt *pvt) | |
1399 | { | |
1400 | int err = 0; | |
1401 | ||
1402 | err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCTL_SEL_LOW, | |
1403 | &pvt->dram_ctl_select_low); | |
1404 | if (err) { | |
1405 | debugf0("Reading F10_DCTL_SEL_LOW failed\n"); | |
1406 | } else { | |
1407 | debugf0("DRAM_DCTL_SEL_LOW=0x%x DctSelBaseAddr=0x%x\n", | |
1408 | pvt->dram_ctl_select_low, dct_sel_baseaddr(pvt)); | |
1409 | ||
1410 | debugf0(" DRAM DCTs are=%s DRAM Is=%s DRAM-Ctl-" | |
1411 | "sel-hi-range=%s\n", | |
1412 | (dct_ganging_enabled(pvt) ? "GANGED" : "NOT GANGED"), | |
1413 | (dct_dram_enabled(pvt) ? "Enabled" : "Disabled"), | |
1414 | (dct_high_range_enabled(pvt) ? "Enabled" : "Disabled")); | |
1415 | ||
1416 | debugf0(" DctDatIntLv=%s MemCleared=%s DctSelIntLvAddr=0x%x\n", | |
1417 | (dct_data_intlv_enabled(pvt) ? "Enabled" : "Disabled"), | |
1418 | (dct_memory_cleared(pvt) ? "True " : "False "), | |
1419 | dct_sel_interleave_addr(pvt)); | |
1420 | } | |
1421 | ||
1422 | err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCTL_SEL_HIGH, | |
1423 | &pvt->dram_ctl_select_high); | |
1424 | if (err) | |
1425 | debugf0("Reading F10_DCTL_SEL_HIGH failed\n"); | |
1426 | } | |
1427 | ||
f71d0a05 DT |
1428 | /* |
1429 | * determine channel based on the interleaving mode: F10h BKDG, 2.8.9 Memory | |
1430 | * Interleaving Modes. | |
1431 | */ | |
6163b5d4 DT |
1432 | static u32 f10_determine_channel(struct amd64_pvt *pvt, u64 sys_addr, |
1433 | int hi_range_sel, u32 intlv_en) | |
1434 | { | |
1435 | u32 cs, temp, dct_sel_high = (pvt->dram_ctl_select_low >> 1) & 1; | |
1436 | ||
1437 | if (dct_ganging_enabled(pvt)) | |
1438 | cs = 0; | |
1439 | else if (hi_range_sel) | |
1440 | cs = dct_sel_high; | |
1441 | else if (dct_interleave_enabled(pvt)) { | |
f71d0a05 DT |
1442 | /* |
1443 | * see F2x110[DctSelIntLvAddr] - channel interleave mode | |
1444 | */ | |
6163b5d4 DT |
1445 | if (dct_sel_interleave_addr(pvt) == 0) |
1446 | cs = sys_addr >> 6 & 1; | |
1447 | else if ((dct_sel_interleave_addr(pvt) >> 1) & 1) { | |
1448 | temp = hweight_long((u32) ((sys_addr >> 16) & 0x1F)) % 2; | |
1449 | ||
1450 | if (dct_sel_interleave_addr(pvt) & 1) | |
1451 | cs = (sys_addr >> 9 & 1) ^ temp; | |
1452 | else | |
1453 | cs = (sys_addr >> 6 & 1) ^ temp; | |
1454 | } else if (intlv_en & 4) | |
1455 | cs = sys_addr >> 15 & 1; | |
1456 | else if (intlv_en & 2) | |
1457 | cs = sys_addr >> 14 & 1; | |
1458 | else if (intlv_en & 1) | |
1459 | cs = sys_addr >> 13 & 1; | |
1460 | else | |
1461 | cs = sys_addr >> 12 & 1; | |
1462 | } else if (dct_high_range_enabled(pvt) && !dct_ganging_enabled(pvt)) | |
1463 | cs = ~dct_sel_high & 1; | |
1464 | else | |
1465 | cs = 0; | |
1466 | ||
1467 | return cs; | |
1468 | } | |
1469 | ||
1470 | static inline u32 f10_map_intlv_en_to_shift(u32 intlv_en) | |
1471 | { | |
1472 | if (intlv_en == 1) | |
1473 | return 1; | |
1474 | else if (intlv_en == 3) | |
1475 | return 2; | |
1476 | else if (intlv_en == 7) | |
1477 | return 3; | |
1478 | ||
1479 | return 0; | |
1480 | } | |
1481 | ||
f71d0a05 DT |
1482 | /* See F10h BKDG, 2.8.10.2 DctSelBaseOffset Programming */ |
1483 | static inline u64 f10_get_base_addr_offset(u64 sys_addr, int hi_range_sel, | |
6163b5d4 DT |
1484 | u32 dct_sel_base_addr, |
1485 | u64 dct_sel_base_off, | |
f71d0a05 | 1486 | u32 hole_valid, u32 hole_off, |
6163b5d4 DT |
1487 | u64 dram_base) |
1488 | { | |
1489 | u64 chan_off; | |
1490 | ||
1491 | if (hi_range_sel) { | |
1492 | if (!(dct_sel_base_addr & 0xFFFFF800) && | |
f71d0a05 | 1493 | hole_valid && (sys_addr >= 0x100000000ULL)) |
6163b5d4 DT |
1494 | chan_off = hole_off << 16; |
1495 | else | |
1496 | chan_off = dct_sel_base_off; | |
1497 | } else { | |
f71d0a05 | 1498 | if (hole_valid && (sys_addr >= 0x100000000ULL)) |
6163b5d4 DT |
1499 | chan_off = hole_off << 16; |
1500 | else | |
1501 | chan_off = dram_base & 0xFFFFF8000000ULL; | |
1502 | } | |
1503 | ||
1504 | return (sys_addr & 0x0000FFFFFFFFFFC0ULL) - | |
1505 | (chan_off & 0x0000FFFFFF800000ULL); | |
1506 | } | |
1507 | ||
1508 | /* Hack for the time being - Can we get this from BIOS?? */ | |
1509 | #define CH0SPARE_RANK 0 | |
1510 | #define CH1SPARE_RANK 1 | |
1511 | ||
1512 | /* | |
1513 | * checks if the csrow passed in is marked as SPARED, if so returns the new | |
1514 | * spare row | |
1515 | */ | |
1516 | static inline int f10_process_possible_spare(int csrow, | |
1517 | u32 cs, struct amd64_pvt *pvt) | |
1518 | { | |
1519 | u32 swap_done; | |
1520 | u32 bad_dram_cs; | |
1521 | ||
1522 | /* Depending on channel, isolate respective SPARING info */ | |
1523 | if (cs) { | |
1524 | swap_done = F10_ONLINE_SPARE_SWAPDONE1(pvt->online_spare); | |
1525 | bad_dram_cs = F10_ONLINE_SPARE_BADDRAM_CS1(pvt->online_spare); | |
1526 | if (swap_done && (csrow == bad_dram_cs)) | |
1527 | csrow = CH1SPARE_RANK; | |
1528 | } else { | |
1529 | swap_done = F10_ONLINE_SPARE_SWAPDONE0(pvt->online_spare); | |
1530 | bad_dram_cs = F10_ONLINE_SPARE_BADDRAM_CS0(pvt->online_spare); | |
1531 | if (swap_done && (csrow == bad_dram_cs)) | |
1532 | csrow = CH0SPARE_RANK; | |
1533 | } | |
1534 | return csrow; | |
1535 | } | |
1536 | ||
1537 | /* | |
1538 | * Iterate over the DRAM DCT "base" and "mask" registers looking for a | |
1539 | * SystemAddr match on the specified 'ChannelSelect' and 'NodeID' | |
1540 | * | |
1541 | * Return: | |
1542 | * -EINVAL: NOT FOUND | |
1543 | * 0..csrow = Chip-Select Row | |
1544 | */ | |
1545 | static int f10_lookup_addr_in_dct(u32 in_addr, u32 nid, u32 cs) | |
1546 | { | |
1547 | struct mem_ctl_info *mci; | |
1548 | struct amd64_pvt *pvt; | |
1549 | u32 cs_base, cs_mask; | |
1550 | int cs_found = -EINVAL; | |
1551 | int csrow; | |
1552 | ||
1553 | mci = mci_lookup[nid]; | |
1554 | if (!mci) | |
1555 | return cs_found; | |
1556 | ||
1557 | pvt = mci->pvt_info; | |
1558 | ||
1559 | debugf1("InputAddr=0x%x channelselect=%d\n", in_addr, cs); | |
1560 | ||
9d858bb1 | 1561 | for (csrow = 0; csrow < pvt->cs_count; csrow++) { |
6163b5d4 DT |
1562 | |
1563 | cs_base = amd64_get_dct_base(pvt, cs, csrow); | |
1564 | if (!(cs_base & K8_DCSB_CS_ENABLE)) | |
1565 | continue; | |
1566 | ||
1567 | /* | |
1568 | * We have an ENABLED CSROW, Isolate just the MASK bits of the | |
1569 | * target: [28:19] and [13:5], which map to [36:27] and [21:13] | |
1570 | * of the actual address. | |
1571 | */ | |
1572 | cs_base &= REV_F_F1Xh_DCSB_BASE_BITS; | |
1573 | ||
1574 | /* | |
1575 | * Get the DCT Mask, and ENABLE the reserved bits: [18:16] and | |
1576 | * [4:0] to become ON. Then mask off bits [28:0] ([36:8]) | |
1577 | */ | |
1578 | cs_mask = amd64_get_dct_mask(pvt, cs, csrow); | |
1579 | ||
1580 | debugf1(" CSROW=%d CSBase=0x%x RAW CSMask=0x%x\n", | |
1581 | csrow, cs_base, cs_mask); | |
1582 | ||
1583 | cs_mask = (cs_mask | 0x0007C01F) & 0x1FFFFFFF; | |
1584 | ||
1585 | debugf1(" Final CSMask=0x%x\n", cs_mask); | |
1586 | debugf1(" (InputAddr & ~CSMask)=0x%x " | |
1587 | "(CSBase & ~CSMask)=0x%x\n", | |
1588 | (in_addr & ~cs_mask), (cs_base & ~cs_mask)); | |
1589 | ||
1590 | if ((in_addr & ~cs_mask) == (cs_base & ~cs_mask)) { | |
1591 | cs_found = f10_process_possible_spare(csrow, cs, pvt); | |
1592 | ||
1593 | debugf1(" MATCH csrow=%d\n", cs_found); | |
1594 | break; | |
1595 | } | |
1596 | } | |
1597 | return cs_found; | |
1598 | } | |
1599 | ||
f71d0a05 DT |
1600 | /* For a given @dram_range, check if @sys_addr falls within it. */ |
1601 | static int f10_match_to_this_node(struct amd64_pvt *pvt, int dram_range, | |
1602 | u64 sys_addr, int *nid, int *chan_sel) | |
1603 | { | |
1604 | int node_id, cs_found = -EINVAL, high_range = 0; | |
1605 | u32 intlv_en, intlv_sel, intlv_shift, hole_off; | |
1606 | u32 hole_valid, tmp, dct_sel_base, channel; | |
1607 | u64 dram_base, chan_addr, dct_sel_base_off; | |
1608 | ||
1609 | dram_base = pvt->dram_base[dram_range]; | |
1610 | intlv_en = pvt->dram_IntlvEn[dram_range]; | |
1611 | ||
1612 | node_id = pvt->dram_DstNode[dram_range]; | |
1613 | intlv_sel = pvt->dram_IntlvSel[dram_range]; | |
1614 | ||
1615 | debugf1("(dram=%d) Base=0x%llx SystemAddr= 0x%llx Limit=0x%llx\n", | |
1616 | dram_range, dram_base, sys_addr, pvt->dram_limit[dram_range]); | |
1617 | ||
1618 | /* | |
1619 | * This assumes that one node's DHAR is the same as all the other | |
1620 | * nodes' DHAR. | |
1621 | */ | |
1622 | hole_off = (pvt->dhar & 0x0000FF80); | |
1623 | hole_valid = (pvt->dhar & 0x1); | |
1624 | dct_sel_base_off = (pvt->dram_ctl_select_high & 0xFFFFFC00) << 16; | |
1625 | ||
1626 | debugf1(" HoleOffset=0x%x HoleValid=0x%x IntlvSel=0x%x\n", | |
1627 | hole_off, hole_valid, intlv_sel); | |
1628 | ||
1629 | if (intlv_en || | |
1630 | (intlv_sel != ((sys_addr >> 12) & intlv_en))) | |
1631 | return -EINVAL; | |
1632 | ||
1633 | dct_sel_base = dct_sel_baseaddr(pvt); | |
1634 | ||
1635 | /* | |
1636 | * check whether addresses >= DctSelBaseAddr[47:27] are to be used to | |
1637 | * select between DCT0 and DCT1. | |
1638 | */ | |
1639 | if (dct_high_range_enabled(pvt) && | |
1640 | !dct_ganging_enabled(pvt) && | |
1641 | ((sys_addr >> 27) >= (dct_sel_base >> 11))) | |
1642 | high_range = 1; | |
1643 | ||
1644 | channel = f10_determine_channel(pvt, sys_addr, high_range, intlv_en); | |
1645 | ||
1646 | chan_addr = f10_get_base_addr_offset(sys_addr, high_range, dct_sel_base, | |
1647 | dct_sel_base_off, hole_valid, | |
1648 | hole_off, dram_base); | |
1649 | ||
1650 | intlv_shift = f10_map_intlv_en_to_shift(intlv_en); | |
1651 | ||
1652 | /* remove Node ID (in case of memory interleaving) */ | |
1653 | tmp = chan_addr & 0xFC0; | |
1654 | ||
1655 | chan_addr = ((chan_addr >> intlv_shift) & 0xFFFFFFFFF000ULL) | tmp; | |
1656 | ||
1657 | /* remove channel interleave and hash */ | |
1658 | if (dct_interleave_enabled(pvt) && | |
1659 | !dct_high_range_enabled(pvt) && | |
1660 | !dct_ganging_enabled(pvt)) { | |
1661 | if (dct_sel_interleave_addr(pvt) != 1) | |
1662 | chan_addr = (chan_addr >> 1) & 0xFFFFFFFFFFFFFFC0ULL; | |
1663 | else { | |
1664 | tmp = chan_addr & 0xFC0; | |
1665 | chan_addr = ((chan_addr & 0xFFFFFFFFFFFFC000ULL) >> 1) | |
1666 | | tmp; | |
1667 | } | |
1668 | } | |
1669 | ||
1670 | debugf1(" (ChannelAddrLong=0x%llx) >> 8 becomes InputAddr=0x%x\n", | |
1671 | chan_addr, (u32)(chan_addr >> 8)); | |
1672 | ||
1673 | cs_found = f10_lookup_addr_in_dct(chan_addr >> 8, node_id, channel); | |
1674 | ||
1675 | if (cs_found >= 0) { | |
1676 | *nid = node_id; | |
1677 | *chan_sel = channel; | |
1678 | } | |
1679 | return cs_found; | |
1680 | } | |
1681 | ||
1682 | static int f10_translate_sysaddr_to_cs(struct amd64_pvt *pvt, u64 sys_addr, | |
1683 | int *node, int *chan_sel) | |
1684 | { | |
1685 | int dram_range, cs_found = -EINVAL; | |
1686 | u64 dram_base, dram_limit; | |
1687 | ||
1688 | for (dram_range = 0; dram_range < DRAM_REG_COUNT; dram_range++) { | |
1689 | ||
1690 | if (!pvt->dram_rw_en[dram_range]) | |
1691 | continue; | |
1692 | ||
1693 | dram_base = pvt->dram_base[dram_range]; | |
1694 | dram_limit = pvt->dram_limit[dram_range]; | |
1695 | ||
1696 | if ((dram_base <= sys_addr) && (sys_addr <= dram_limit)) { | |
1697 | ||
1698 | cs_found = f10_match_to_this_node(pvt, dram_range, | |
1699 | sys_addr, node, | |
1700 | chan_sel); | |
1701 | if (cs_found >= 0) | |
1702 | break; | |
1703 | } | |
1704 | } | |
1705 | return cs_found; | |
1706 | } | |
1707 | ||
1708 | /* | |
1709 | * This the F10h reference code from AMD to map a @sys_addr to NodeID, | |
1710 | * CSROW, Channel. | |
1711 | * | |
1712 | * The @sys_addr is usually an error address received from the hardware. | |
1713 | */ | |
1714 | static void f10_map_sysaddr_to_csrow(struct mem_ctl_info *mci, | |
ef44cc4c | 1715 | struct err_regs *info, |
f71d0a05 DT |
1716 | u64 sys_addr) |
1717 | { | |
1718 | struct amd64_pvt *pvt = mci->pvt_info; | |
1719 | u32 page, offset; | |
1720 | unsigned short syndrome; | |
1721 | int nid, csrow, chan = 0; | |
1722 | ||
1723 | csrow = f10_translate_sysaddr_to_cs(pvt, sys_addr, &nid, &chan); | |
1724 | ||
1725 | if (csrow >= 0) { | |
1726 | error_address_to_page_and_offset(sys_addr, &page, &offset); | |
1727 | ||
b70ef010 BP |
1728 | syndrome = HIGH_SYNDROME(info->nbsl) << 8; |
1729 | syndrome |= LOW_SYNDROME(info->nbsh); | |
f71d0a05 DT |
1730 | |
1731 | /* | |
1732 | * Is CHIPKILL on? If so, then we can attempt to use the | |
1733 | * syndrome to isolate which channel the error was on. | |
1734 | */ | |
1735 | if (pvt->nbcfg & K8_NBCFG_CHIPKILL) | |
1736 | chan = get_channel_from_ecc_syndrome(syndrome); | |
1737 | ||
1738 | if (chan >= 0) { | |
1739 | edac_mc_handle_ce(mci, page, offset, syndrome, | |
1740 | csrow, chan, EDAC_MOD_STR); | |
1741 | } else { | |
1742 | /* | |
1743 | * Channel unknown, report all channels on this | |
1744 | * CSROW as failed. | |
1745 | */ | |
1746 | for (chan = 0; chan < mci->csrows[csrow].nr_channels; | |
1747 | chan++) { | |
1748 | edac_mc_handle_ce(mci, page, offset, | |
1749 | syndrome, | |
1750 | csrow, chan, | |
1751 | EDAC_MOD_STR); | |
1752 | } | |
1753 | } | |
1754 | ||
1755 | } else { | |
1756 | edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR); | |
1757 | } | |
1758 | } | |
1759 | ||
1760 | /* | |
1761 | * Input (@index) is the DBAM DIMM value (1 of 4) used as an index into a shift | |
1762 | * table (revf_quad_ddr2_shift) which starts at 128MB DIMM size. Index of 0 | |
1763 | * indicates an empty DIMM slot, as reported by Hardware on empty slots. | |
1764 | * | |
1765 | * Normalize to 128MB by subracting 27 bit shift. | |
1766 | */ | |
1767 | static int map_dbam_to_csrow_size(int index) | |
1768 | { | |
1769 | int mega_bytes = 0; | |
1770 | ||
1771 | if (index > 0 && index <= DBAM_MAX_VALUE) | |
1772 | mega_bytes = ((128 << (revf_quad_ddr2_shift[index]-27))); | |
1773 | ||
1774 | return mega_bytes; | |
1775 | } | |
1776 | ||
1777 | /* | |
1778 | * debug routine to display the memory sizes of a DIMM (ganged or not) and it | |
1779 | * CSROWs as well | |
1780 | */ | |
1781 | static void f10_debug_display_dimm_sizes(int ctrl, struct amd64_pvt *pvt, | |
1782 | int ganged) | |
1783 | { | |
1784 | int dimm, size0, size1; | |
1785 | u32 dbam; | |
1786 | u32 *dcsb; | |
1787 | ||
1788 | debugf1(" dbam%d: 0x%8.08x CSROW is %s\n", ctrl, | |
1789 | ctrl ? pvt->dbam1 : pvt->dbam0, | |
1790 | ganged ? "GANGED - dbam1 not used" : "NON-GANGED"); | |
1791 | ||
1792 | dbam = ctrl ? pvt->dbam1 : pvt->dbam0; | |
1793 | dcsb = ctrl ? pvt->dcsb1 : pvt->dcsb0; | |
1794 | ||
1795 | /* Dump memory sizes for DIMM and its CSROWs */ | |
1796 | for (dimm = 0; dimm < 4; dimm++) { | |
1797 | ||
1798 | size0 = 0; | |
1799 | if (dcsb[dimm*2] & K8_DCSB_CS_ENABLE) | |
1800 | size0 = map_dbam_to_csrow_size(DBAM_DIMM(dimm, dbam)); | |
1801 | ||
1802 | size1 = 0; | |
1803 | if (dcsb[dimm*2 + 1] & K8_DCSB_CS_ENABLE) | |
1804 | size1 = map_dbam_to_csrow_size(DBAM_DIMM(dimm, dbam)); | |
1805 | ||
1806 | debugf1(" CTRL-%d DIMM-%d=%5dMB CSROW-%d=%5dMB " | |
1807 | "CSROW-%d=%5dMB\n", | |
1808 | ctrl, | |
1809 | dimm, | |
1810 | size0 + size1, | |
1811 | dimm * 2, | |
1812 | size0, | |
1813 | dimm * 2 + 1, | |
1814 | size1); | |
1815 | } | |
1816 | } | |
1817 | ||
1818 | /* | |
1819 | * Very early hardware probe on pci_probe thread to determine if this module | |
1820 | * supports the hardware. | |
1821 | * | |
1822 | * Return: | |
1823 | * 0 for OK | |
1824 | * 1 for error | |
1825 | */ | |
1826 | static int f10_probe_valid_hardware(struct amd64_pvt *pvt) | |
1827 | { | |
1828 | int ret = 0; | |
1829 | ||
1830 | /* | |
1831 | * If we are on a DDR3 machine, we don't know yet if | |
1832 | * we support that properly at this time | |
1833 | */ | |
1834 | if ((pvt->dchr0 & F10_DCHR_Ddr3Mode) || | |
1835 | (pvt->dchr1 & F10_DCHR_Ddr3Mode)) { | |
1836 | ||
1837 | amd64_printk(KERN_WARNING, | |
1838 | "%s() This machine is running with DDR3 memory. " | |
1839 | "This is not currently supported. " | |
1840 | "DCHR0=0x%x DCHR1=0x%x\n", | |
1841 | __func__, pvt->dchr0, pvt->dchr1); | |
1842 | ||
1843 | amd64_printk(KERN_WARNING, | |
1844 | " Contact '%s' module MAINTAINER to help add" | |
1845 | " support.\n", | |
1846 | EDAC_MOD_STR); | |
1847 | ||
1848 | ret = 1; | |
1849 | ||
1850 | } | |
1851 | return ret; | |
1852 | } | |
6163b5d4 | 1853 | |
4d37607a DT |
1854 | /* |
1855 | * There currently are 3 types type of MC devices for AMD Athlon/Opterons | |
1856 | * (as per PCI DEVICE_IDs): | |
1857 | * | |
1858 | * Family K8: That is the Athlon64 and Opteron CPUs. They all have the same PCI | |
1859 | * DEVICE ID, even though there is differences between the different Revisions | |
1860 | * (CG,D,E,F). | |
1861 | * | |
1862 | * Family F10h and F11h. | |
1863 | * | |
1864 | */ | |
1865 | static struct amd64_family_type amd64_family_types[] = { | |
1866 | [K8_CPUS] = { | |
1867 | .ctl_name = "RevF", | |
1868 | .addr_f1_ctl = PCI_DEVICE_ID_AMD_K8_NB_ADDRMAP, | |
1869 | .misc_f3_ctl = PCI_DEVICE_ID_AMD_K8_NB_MISC, | |
1870 | .ops = { | |
1871 | .early_channel_count = k8_early_channel_count, | |
1872 | .get_error_address = k8_get_error_address, | |
1873 | .read_dram_base_limit = k8_read_dram_base_limit, | |
1874 | .map_sysaddr_to_csrow = k8_map_sysaddr_to_csrow, | |
1875 | .dbam_map_to_pages = k8_dbam_map_to_pages, | |
1876 | } | |
1877 | }, | |
1878 | [F10_CPUS] = { | |
1879 | .ctl_name = "Family 10h", | |
1880 | .addr_f1_ctl = PCI_DEVICE_ID_AMD_10H_NB_MAP, | |
1881 | .misc_f3_ctl = PCI_DEVICE_ID_AMD_10H_NB_MISC, | |
1882 | .ops = { | |
1883 | .probe_valid_hardware = f10_probe_valid_hardware, | |
1884 | .early_channel_count = f10_early_channel_count, | |
1885 | .get_error_address = f10_get_error_address, | |
1886 | .read_dram_base_limit = f10_read_dram_base_limit, | |
1887 | .read_dram_ctl_register = f10_read_dram_ctl_register, | |
1888 | .map_sysaddr_to_csrow = f10_map_sysaddr_to_csrow, | |
1889 | .dbam_map_to_pages = f10_dbam_map_to_pages, | |
1890 | } | |
1891 | }, | |
1892 | [F11_CPUS] = { | |
1893 | .ctl_name = "Family 11h", | |
1894 | .addr_f1_ctl = PCI_DEVICE_ID_AMD_11H_NB_MAP, | |
1895 | .misc_f3_ctl = PCI_DEVICE_ID_AMD_11H_NB_MISC, | |
1896 | .ops = { | |
1897 | .probe_valid_hardware = f10_probe_valid_hardware, | |
1898 | .early_channel_count = f10_early_channel_count, | |
1899 | .get_error_address = f10_get_error_address, | |
1900 | .read_dram_base_limit = f10_read_dram_base_limit, | |
1901 | .read_dram_ctl_register = f10_read_dram_ctl_register, | |
1902 | .map_sysaddr_to_csrow = f10_map_sysaddr_to_csrow, | |
1903 | .dbam_map_to_pages = f10_dbam_map_to_pages, | |
1904 | } | |
1905 | }, | |
1906 | }; | |
1907 | ||
1908 | static struct pci_dev *pci_get_related_function(unsigned int vendor, | |
1909 | unsigned int device, | |
1910 | struct pci_dev *related) | |
1911 | { | |
1912 | struct pci_dev *dev = NULL; | |
1913 | ||
1914 | dev = pci_get_device(vendor, device, dev); | |
1915 | while (dev) { | |
1916 | if ((dev->bus->number == related->bus->number) && | |
1917 | (PCI_SLOT(dev->devfn) == PCI_SLOT(related->devfn))) | |
1918 | break; | |
1919 | dev = pci_get_device(vendor, device, dev); | |
1920 | } | |
1921 | ||
1922 | return dev; | |
1923 | } | |
1924 | ||
b1289d6f DT |
1925 | /* |
1926 | * syndrome mapping table for ECC ChipKill devices | |
1927 | * | |
1928 | * The comment in each row is the token (nibble) number that is in error. | |
1929 | * The least significant nibble of the syndrome is the mask for the bits | |
1930 | * that are in error (need to be toggled) for the particular nibble. | |
1931 | * | |
1932 | * Each row contains 16 entries. | |
1933 | * The first entry (0th) is the channel number for that row of syndromes. | |
1934 | * The remaining 15 entries are the syndromes for the respective Error | |
1935 | * bit mask index. | |
1936 | * | |
1937 | * 1st index entry is 0x0001 mask, indicating that the rightmost bit is the | |
1938 | * bit in error. | |
1939 | * The 2nd index entry is 0x0010 that the second bit is damaged. | |
1940 | * The 3rd index entry is 0x0011 indicating that the rightmost 2 bits | |
1941 | * are damaged. | |
1942 | * Thus so on until index 15, 0x1111, whose entry has the syndrome | |
1943 | * indicating that all 4 bits are damaged. | |
1944 | * | |
1945 | * A search is performed on this table looking for a given syndrome. | |
1946 | * | |
1947 | * See the AMD documentation for ECC syndromes. This ECC table is valid | |
1948 | * across all the versions of the AMD64 processors. | |
1949 | * | |
1950 | * A fast lookup is to use the LAST four bits of the 16-bit syndrome as a | |
1951 | * COLUMN index, then search all ROWS of that column, looking for a match | |
1952 | * with the input syndrome. The ROW value will be the token number. | |
1953 | * | |
1954 | * The 0'th entry on that row, can be returned as the CHANNEL (0 or 1) of this | |
1955 | * error. | |
1956 | */ | |
1957 | #define NUMBER_ECC_ROWS 36 | |
1958 | static const unsigned short ecc_chipkill_syndromes[NUMBER_ECC_ROWS][16] = { | |
1959 | /* Channel 0 syndromes */ | |
1960 | {/*0*/ 0, 0xe821, 0x7c32, 0x9413, 0xbb44, 0x5365, 0xc776, 0x2f57, | |
1961 | 0xdd88, 0x35a9, 0xa1ba, 0x499b, 0x66cc, 0x8eed, 0x1afe, 0xf2df }, | |
1962 | {/*1*/ 0, 0x5d31, 0xa612, 0xfb23, 0x9584, 0xc8b5, 0x3396, 0x6ea7, | |
1963 | 0xeac8, 0xb7f9, 0x4cda, 0x11eb, 0x7f4c, 0x227d, 0xd95e, 0x846f }, | |
1964 | {/*2*/ 0, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0006, 0x0007, | |
1965 | 0x0008, 0x0009, 0x000a, 0x000b, 0x000c, 0x000d, 0x000e, 0x000f }, | |
1966 | {/*3*/ 0, 0x2021, 0x3032, 0x1013, 0x4044, 0x6065, 0x7076, 0x5057, | |
1967 | 0x8088, 0xa0a9, 0xb0ba, 0x909b, 0xc0cc, 0xe0ed, 0xf0fe, 0xd0df }, | |
1968 | {/*4*/ 0, 0x5041, 0xa082, 0xf0c3, 0x9054, 0xc015, 0x30d6, 0x6097, | |
1969 | 0xe0a8, 0xb0e9, 0x402a, 0x106b, 0x70fc, 0x20bd, 0xd07e, 0x803f }, | |
1970 | {/*5*/ 0, 0xbe21, 0xd732, 0x6913, 0x2144, 0x9f65, 0xf676, 0x4857, | |
1971 | 0x3288, 0x8ca9, 0xe5ba, 0x5b9b, 0x13cc, 0xaded, 0xc4fe, 0x7adf }, | |
1972 | {/*6*/ 0, 0x4951, 0x8ea2, 0xc7f3, 0x5394, 0x1ac5, 0xdd36, 0x9467, | |
1973 | 0xa1e8, 0xe8b9, 0x2f4a, 0x661b, 0xf27c, 0xbb2d, 0x7cde, 0x358f }, | |
1974 | {/*7*/ 0, 0x74e1, 0x9872, 0xec93, 0xd6b4, 0xa255, 0x4ec6, 0x3a27, | |
1975 | 0x6bd8, 0x1f39, 0xf3aa, 0x874b, 0xbd6c, 0xc98d, 0x251e, 0x51ff }, | |
1976 | {/*8*/ 0, 0x15c1, 0x2a42, 0x3f83, 0xcef4, 0xdb35, 0xe4b6, 0xf177, | |
1977 | 0x4758, 0x5299, 0x6d1a, 0x78db, 0x89ac, 0x9c6d, 0xa3ee, 0xb62f }, | |
1978 | {/*9*/ 0, 0x3d01, 0x1602, 0x2b03, 0x8504, 0xb805, 0x9306, 0xae07, | |
1979 | 0xca08, 0xf709, 0xdc0a, 0xe10b, 0x4f0c, 0x720d, 0x590e, 0x640f }, | |
1980 | {/*a*/ 0, 0x9801, 0xec02, 0x7403, 0x6b04, 0xf305, 0x8706, 0x1f07, | |
1981 | 0xbd08, 0x2509, 0x510a, 0xc90b, 0xd60c, 0x4e0d, 0x3a0e, 0xa20f }, | |
1982 | {/*b*/ 0, 0xd131, 0x6212, 0xb323, 0x3884, 0xe9b5, 0x5a96, 0x8ba7, | |
1983 | 0x1cc8, 0xcdf9, 0x7eda, 0xafeb, 0x244c, 0xf57d, 0x465e, 0x976f }, | |
1984 | {/*c*/ 0, 0xe1d1, 0x7262, 0x93b3, 0xb834, 0x59e5, 0xca56, 0x2b87, | |
1985 | 0xdc18, 0x3dc9, 0xae7a, 0x4fab, 0x542c, 0x85fd, 0x164e, 0xf79f }, | |
1986 | {/*d*/ 0, 0x6051, 0xb0a2, 0xd0f3, 0x1094, 0x70c5, 0xa036, 0xc067, | |
1987 | 0x20e8, 0x40b9, 0x904a, 0x601b, 0x307c, 0x502d, 0x80de, 0xe08f }, | |
1988 | {/*e*/ 0, 0xa4c1, 0xf842, 0x5c83, 0xe6f4, 0x4235, 0x1eb6, 0xba77, | |
1989 | 0x7b58, 0xdf99, 0x831a, 0x27db, 0x9dac, 0x396d, 0x65ee, 0xc12f }, | |
1990 | {/*f*/ 0, 0x11c1, 0x2242, 0x3383, 0xc8f4, 0xd935, 0xeab6, 0xfb77, | |
1991 | 0x4c58, 0x5d99, 0x6e1a, 0x7fdb, 0x84ac, 0x956d, 0xa6ee, 0xb72f }, | |
1992 | ||
1993 | /* Channel 1 syndromes */ | |
1994 | {/*10*/ 1, 0x45d1, 0x8a62, 0xcfb3, 0x5e34, 0x1be5, 0xd456, 0x9187, | |
1995 | 0xa718, 0xe2c9, 0x2d7a, 0x68ab, 0xf92c, 0xbcfd, 0x734e, 0x369f }, | |
1996 | {/*11*/ 1, 0x63e1, 0xb172, 0xd293, 0x14b4, 0x7755, 0xa5c6, 0xc627, | |
1997 | 0x28d8, 0x4b39, 0x99aa, 0xfa4b, 0x3c6c, 0x5f8d, 0x8d1e, 0xeeff }, | |
1998 | {/*12*/ 1, 0xb741, 0xd982, 0x6ec3, 0x2254, 0x9515, 0xfbd6, 0x4c97, | |
1999 | 0x33a8, 0x84e9, 0xea2a, 0x5d6b, 0x11fc, 0xa6bd, 0xc87e, 0x7f3f }, | |
2000 | {/*13*/ 1, 0xdd41, 0x6682, 0xbbc3, 0x3554, 0xe815, 0x53d6, 0xce97, | |
2001 | 0x1aa8, 0xc7e9, 0x7c2a, 0xa1fb, 0x2ffc, 0xf2bd, 0x497e, 0x943f }, | |
2002 | {/*14*/ 1, 0x2bd1, 0x3d62, 0x16b3, 0x4f34, 0x64e5, 0x7256, 0x5987, | |
2003 | 0x8518, 0xaec9, 0xb87a, 0x93ab, 0xca2c, 0xe1fd, 0xf74e, 0xdc9f }, | |
2004 | {/*15*/ 1, 0x83c1, 0xc142, 0x4283, 0xa4f4, 0x2735, 0x65b6, 0xe677, | |
2005 | 0xf858, 0x7b99, 0x391a, 0xbadb, 0x5cac, 0xdf6d, 0x9dee, 0x1e2f }, | |
2006 | {/*16*/ 1, 0x8fd1, 0xc562, 0x4ab3, 0xa934, 0x26e5, 0x6c56, 0xe387, | |
2007 | 0xfe18, 0x71c9, 0x3b7a, 0xb4ab, 0x572c, 0xd8fd, 0x924e, 0x1d9f }, | |
2008 | {/*17*/ 1, 0x4791, 0x89e2, 0xce73, 0x5264, 0x15f5, 0xdb86, 0x9c17, | |
2009 | 0xa3b8, 0xe429, 0x2a5a, 0x6dcb, 0xf1dc, 0xb64d, 0x783e, 0x3faf }, | |
2010 | {/*18*/ 1, 0x5781, 0xa9c2, 0xfe43, 0x92a4, 0xc525, 0x3b66, 0x6ce7, | |
2011 | 0xe3f8, 0xb479, 0x4a3a, 0x1dbb, 0x715c, 0x26dd, 0xd89e, 0x8f1f }, | |
2012 | {/*19*/ 1, 0xbf41, 0xd582, 0x6ac3, 0x2954, 0x9615, 0xfcd6, 0x4397, | |
2013 | 0x3ea8, 0x81e9, 0xeb2a, 0x546b, 0x17fc, 0xa8bd, 0xc27e, 0x7d3f }, | |
2014 | {/*1a*/ 1, 0x9891, 0xe1e2, 0x7273, 0x6464, 0xf7f5, 0x8586, 0x1617, | |
2015 | 0xb8b8, 0x2b29, 0x595a, 0xcacb, 0xdcdc, 0x4f4d, 0x3d3e, 0xaeaf }, | |
2016 | {/*1b*/ 1, 0xcce1, 0x4472, 0x8893, 0xfdb4, 0x3f55, 0xb9c6, 0x7527, | |
2017 | 0x56d8, 0x9a39, 0x12aa, 0xde4b, 0xab6c, 0x678d, 0xef1e, 0x23ff }, | |
2018 | {/*1c*/ 1, 0xa761, 0xf9b2, 0x5ed3, 0xe214, 0x4575, 0x1ba6, 0xbcc7, | |
2019 | 0x7328, 0xd449, 0x8a9a, 0x2dfb, 0x913c, 0x365d, 0x688e, 0xcfef }, | |
2020 | {/*1d*/ 1, 0xff61, 0x55b2, 0xaad3, 0x7914, 0x8675, 0x2ca6, 0xd3c7, | |
2021 | 0x9e28, 0x6149, 0xcb9a, 0x34fb, 0xe73c, 0x185d, 0xb28e, 0x4def }, | |
2022 | {/*1e*/ 1, 0x5451, 0xa8a2, 0xfcf3, 0x9694, 0xc2c5, 0x3e36, 0x6a67, | |
2023 | 0xebe8, 0xbfb9, 0x434a, 0x171b, 0x7d7c, 0x292d, 0xd5de, 0x818f }, | |
2024 | {/*1f*/ 1, 0x6fc1, 0xb542, 0xda83, 0x19f4, 0x7635, 0xacb6, 0xc377, | |
2025 | 0x2e58, 0x4199, 0x9b1a, 0xf4db, 0x37ac, 0x586d, 0x82ee, 0xed2f }, | |
2026 | ||
2027 | /* ECC bits are also in the set of tokens and they too can go bad | |
2028 | * first 2 cover channel 0, while the second 2 cover channel 1 | |
2029 | */ | |
2030 | {/*20*/ 0, 0xbe01, 0xd702, 0x6903, 0x2104, 0x9f05, 0xf606, 0x4807, | |
2031 | 0x3208, 0x8c09, 0xe50a, 0x5b0b, 0x130c, 0xad0d, 0xc40e, 0x7a0f }, | |
2032 | {/*21*/ 0, 0x4101, 0x8202, 0xc303, 0x5804, 0x1905, 0xda06, 0x9b07, | |
2033 | 0xac08, 0xed09, 0x2e0a, 0x6f0b, 0x640c, 0xb50d, 0x760e, 0x370f }, | |
2034 | {/*22*/ 1, 0xc441, 0x4882, 0x8cc3, 0xf654, 0x3215, 0xbed6, 0x7a97, | |
2035 | 0x5ba8, 0x9fe9, 0x132a, 0xd76b, 0xadfc, 0x69bd, 0xe57e, 0x213f }, | |
2036 | {/*23*/ 1, 0x7621, 0x9b32, 0xed13, 0xda44, 0xac65, 0x4176, 0x3757, | |
2037 | 0x6f88, 0x19a9, 0xf4ba, 0x829b, 0xb5cc, 0xc3ed, 0x2efe, 0x58df } | |
2038 | }; | |
2039 | ||
2040 | /* | |
2041 | * Given the syndrome argument, scan each of the channel tables for a syndrome | |
2042 | * match. Depending on which table it is found, return the channel number. | |
2043 | */ | |
2044 | static int get_channel_from_ecc_syndrome(unsigned short syndrome) | |
2045 | { | |
2046 | int row; | |
2047 | int column; | |
4d37607a | 2048 | |
b1289d6f DT |
2049 | /* Determine column to scan */ |
2050 | column = syndrome & 0xF; | |
2051 | ||
2052 | /* Scan all rows, looking for syndrome, or end of table */ | |
2053 | for (row = 0; row < NUMBER_ECC_ROWS; row++) { | |
2054 | if (ecc_chipkill_syndromes[row][column] == syndrome) | |
2055 | return ecc_chipkill_syndromes[row][0]; | |
2056 | } | |
2057 | ||
2058 | debugf0("syndrome(%x) not found\n", syndrome); | |
2059 | return -1; | |
2060 | } | |
d27bf6fa DT |
2061 | |
2062 | /* | |
2063 | * Check for valid error in the NB Status High register. If so, proceed to read | |
2064 | * NB Status Low, NB Address Low and NB Address High registers and store data | |
2065 | * into error structure. | |
2066 | * | |
2067 | * Returns: | |
2068 | * - 1: if hardware regs contains valid error info | |
2069 | * - 0: if no valid error is indicated | |
2070 | */ | |
2071 | static int amd64_get_error_info_regs(struct mem_ctl_info *mci, | |
ef44cc4c | 2072 | struct err_regs *regs) |
d27bf6fa DT |
2073 | { |
2074 | struct amd64_pvt *pvt; | |
2075 | struct pci_dev *misc_f3_ctl; | |
2076 | int err = 0; | |
2077 | ||
2078 | pvt = mci->pvt_info; | |
2079 | misc_f3_ctl = pvt->misc_f3_ctl; | |
2080 | ||
2081 | err = pci_read_config_dword(misc_f3_ctl, K8_NBSH, ®s->nbsh); | |
2082 | if (err) | |
2083 | goto err_reg; | |
2084 | ||
2085 | if (!(regs->nbsh & K8_NBSH_VALID_BIT)) | |
2086 | return 0; | |
2087 | ||
2088 | /* valid error, read remaining error information registers */ | |
2089 | err = pci_read_config_dword(misc_f3_ctl, K8_NBSL, ®s->nbsl); | |
2090 | if (err) | |
2091 | goto err_reg; | |
2092 | ||
2093 | err = pci_read_config_dword(misc_f3_ctl, K8_NBEAL, ®s->nbeal); | |
2094 | if (err) | |
2095 | goto err_reg; | |
2096 | ||
2097 | err = pci_read_config_dword(misc_f3_ctl, K8_NBEAH, ®s->nbeah); | |
2098 | if (err) | |
2099 | goto err_reg; | |
2100 | ||
2101 | err = pci_read_config_dword(misc_f3_ctl, K8_NBCFG, ®s->nbcfg); | |
2102 | if (err) | |
2103 | goto err_reg; | |
2104 | ||
2105 | return 1; | |
2106 | ||
2107 | err_reg: | |
2108 | debugf0("Reading error info register failed\n"); | |
2109 | return 0; | |
2110 | } | |
2111 | ||
2112 | /* | |
2113 | * This function is called to retrieve the error data from hardware and store it | |
2114 | * in the info structure. | |
2115 | * | |
2116 | * Returns: | |
2117 | * - 1: if a valid error is found | |
2118 | * - 0: if no error is found | |
2119 | */ | |
2120 | static int amd64_get_error_info(struct mem_ctl_info *mci, | |
ef44cc4c | 2121 | struct err_regs *info) |
d27bf6fa DT |
2122 | { |
2123 | struct amd64_pvt *pvt; | |
ef44cc4c | 2124 | struct err_regs regs; |
d27bf6fa DT |
2125 | |
2126 | pvt = mci->pvt_info; | |
2127 | ||
2128 | if (!amd64_get_error_info_regs(mci, info)) | |
2129 | return 0; | |
2130 | ||
2131 | /* | |
2132 | * Here's the problem with the K8's EDAC reporting: There are four | |
2133 | * registers which report pieces of error information. They are shared | |
2134 | * between CEs and UEs. Furthermore, contrary to what is stated in the | |
2135 | * BKDG, the overflow bit is never used! Every error always updates the | |
2136 | * reporting registers. | |
2137 | * | |
2138 | * Can you see the race condition? All four error reporting registers | |
2139 | * must be read before a new error updates them! There is no way to read | |
2140 | * all four registers atomically. The best than can be done is to detect | |
2141 | * that a race has occured and then report the error without any kind of | |
2142 | * precision. | |
2143 | * | |
2144 | * What is still positive is that errors are still reported and thus | |
2145 | * problems can still be detected - just not localized because the | |
2146 | * syndrome and address are spread out across registers. | |
2147 | * | |
2148 | * Grrrrr!!!!! Here's hoping that AMD fixes this in some future K8 rev. | |
2149 | * UEs and CEs should have separate register sets with proper overflow | |
2150 | * bits that are used! At very least the problem can be fixed by | |
2151 | * honoring the ErrValid bit in 'nbsh' and not updating registers - just | |
2152 | * set the overflow bit - unless the current error is CE and the new | |
2153 | * error is UE which would be the only situation for overwriting the | |
2154 | * current values. | |
2155 | */ | |
2156 | ||
2157 | regs = *info; | |
2158 | ||
2159 | /* Use info from the second read - most current */ | |
2160 | if (unlikely(!amd64_get_error_info_regs(mci, info))) | |
2161 | return 0; | |
2162 | ||
2163 | /* clear the error bits in hardware */ | |
2164 | pci_write_bits32(pvt->misc_f3_ctl, K8_NBSH, 0, K8_NBSH_VALID_BIT); | |
2165 | ||
2166 | /* Check for the possible race condition */ | |
2167 | if ((regs.nbsh != info->nbsh) || | |
2168 | (regs.nbsl != info->nbsl) || | |
2169 | (regs.nbeah != info->nbeah) || | |
2170 | (regs.nbeal != info->nbeal)) { | |
2171 | amd64_mc_printk(mci, KERN_WARNING, | |
2172 | "hardware STATUS read access race condition " | |
2173 | "detected!\n"); | |
2174 | return 0; | |
2175 | } | |
2176 | return 1; | |
2177 | } | |
2178 | ||
d27bf6fa DT |
2179 | /* |
2180 | * Handle any Correctable Errors (CEs) that have occurred. Check for valid ERROR | |
2181 | * ADDRESS and process. | |
2182 | */ | |
2183 | static void amd64_handle_ce(struct mem_ctl_info *mci, | |
ef44cc4c | 2184 | struct err_regs *info) |
d27bf6fa DT |
2185 | { |
2186 | struct amd64_pvt *pvt = mci->pvt_info; | |
2187 | u64 SystemAddress; | |
2188 | ||
2189 | /* Ensure that the Error Address is VALID */ | |
2190 | if ((info->nbsh & K8_NBSH_VALID_ERROR_ADDR) == 0) { | |
2191 | amd64_mc_printk(mci, KERN_ERR, | |
2192 | "HW has no ERROR_ADDRESS available\n"); | |
2193 | edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR); | |
2194 | return; | |
2195 | } | |
2196 | ||
2197 | SystemAddress = extract_error_address(mci, info); | |
2198 | ||
2199 | amd64_mc_printk(mci, KERN_ERR, | |
2200 | "CE ERROR_ADDRESS= 0x%llx\n", SystemAddress); | |
2201 | ||
2202 | pvt->ops->map_sysaddr_to_csrow(mci, info, SystemAddress); | |
2203 | } | |
2204 | ||
2205 | /* Handle any Un-correctable Errors (UEs) */ | |
2206 | static void amd64_handle_ue(struct mem_ctl_info *mci, | |
ef44cc4c | 2207 | struct err_regs *info) |
d27bf6fa DT |
2208 | { |
2209 | int csrow; | |
2210 | u64 SystemAddress; | |
2211 | u32 page, offset; | |
2212 | struct mem_ctl_info *log_mci, *src_mci = NULL; | |
2213 | ||
2214 | log_mci = mci; | |
2215 | ||
2216 | if ((info->nbsh & K8_NBSH_VALID_ERROR_ADDR) == 0) { | |
2217 | amd64_mc_printk(mci, KERN_CRIT, | |
2218 | "HW has no ERROR_ADDRESS available\n"); | |
2219 | edac_mc_handle_ue_no_info(log_mci, EDAC_MOD_STR); | |
2220 | return; | |
2221 | } | |
2222 | ||
2223 | SystemAddress = extract_error_address(mci, info); | |
2224 | ||
2225 | /* | |
2226 | * Find out which node the error address belongs to. This may be | |
2227 | * different from the node that detected the error. | |
2228 | */ | |
2229 | src_mci = find_mc_by_sys_addr(mci, SystemAddress); | |
2230 | if (!src_mci) { | |
2231 | amd64_mc_printk(mci, KERN_CRIT, | |
2232 | "ERROR ADDRESS (0x%lx) value NOT mapped to a MC\n", | |
2233 | (unsigned long)SystemAddress); | |
2234 | edac_mc_handle_ue_no_info(log_mci, EDAC_MOD_STR); | |
2235 | return; | |
2236 | } | |
2237 | ||
2238 | log_mci = src_mci; | |
2239 | ||
2240 | csrow = sys_addr_to_csrow(log_mci, SystemAddress); | |
2241 | if (csrow < 0) { | |
2242 | amd64_mc_printk(mci, KERN_CRIT, | |
2243 | "ERROR_ADDRESS (0x%lx) value NOT mapped to 'csrow'\n", | |
2244 | (unsigned long)SystemAddress); | |
2245 | edac_mc_handle_ue_no_info(log_mci, EDAC_MOD_STR); | |
2246 | } else { | |
2247 | error_address_to_page_and_offset(SystemAddress, &page, &offset); | |
2248 | edac_mc_handle_ue(log_mci, page, offset, csrow, EDAC_MOD_STR); | |
2249 | } | |
2250 | } | |
2251 | ||
549d042d | 2252 | static inline void __amd64_decode_bus_error(struct mem_ctl_info *mci, |
b69b29de | 2253 | struct err_regs *info) |
d27bf6fa | 2254 | { |
b70ef010 BP |
2255 | u32 ec = ERROR_CODE(info->nbsl); |
2256 | u32 xec = EXT_ERROR_CODE(info->nbsl); | |
b69b29de | 2257 | int ecc_type = info->nbsh & (0x3 << 13); |
d27bf6fa | 2258 | |
b70ef010 BP |
2259 | /* Bail early out if this was an 'observed' error */ |
2260 | if (PP(ec) == K8_NBSL_PP_OBS) | |
2261 | return; | |
d27bf6fa | 2262 | |
ecaf5606 BP |
2263 | /* Do only ECC errors */ |
2264 | if (xec && xec != F10_NBSL_EXT_ERR_ECC) | |
d27bf6fa | 2265 | return; |
d27bf6fa | 2266 | |
ecaf5606 | 2267 | if (ecc_type == 2) |
d27bf6fa | 2268 | amd64_handle_ce(mci, info); |
ecaf5606 | 2269 | else if (ecc_type == 1) |
d27bf6fa DT |
2270 | amd64_handle_ue(mci, info); |
2271 | ||
2272 | /* | |
2273 | * If main error is CE then overflow must be CE. If main error is UE | |
2274 | * then overflow is unknown. We'll call the overflow a CE - if | |
2275 | * panic_on_ue is set then we're already panic'ed and won't arrive | |
2276 | * here. Else, then apparently someone doesn't think that UE's are | |
2277 | * catastrophic. | |
2278 | */ | |
2279 | if (info->nbsh & K8_NBSH_OVERFLOW) | |
ecaf5606 | 2280 | edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR "Error Overflow"); |
d27bf6fa DT |
2281 | } |
2282 | ||
b69b29de | 2283 | void amd64_decode_bus_error(int node_id, struct err_regs *regs) |
d27bf6fa | 2284 | { |
549d042d | 2285 | struct mem_ctl_info *mci = mci_lookup[node_id]; |
d27bf6fa | 2286 | |
b69b29de | 2287 | __amd64_decode_bus_error(mci, regs); |
d27bf6fa | 2288 | |
d27bf6fa DT |
2289 | /* |
2290 | * Check the UE bit of the NB status high register, if set generate some | |
2291 | * logs. If NOT a GART error, then process the event as a NO-INFO event. | |
2292 | * If it was a GART error, skip that process. | |
549d042d BP |
2293 | * |
2294 | * FIXME: this should go somewhere else, if at all. | |
d27bf6fa | 2295 | */ |
5110dbde BP |
2296 | if (regs->nbsh & K8_NBSH_UC_ERR && !report_gart_errors) |
2297 | edac_mc_handle_ue_no_info(mci, "UE bit is set"); | |
549d042d | 2298 | |
d27bf6fa | 2299 | } |
d27bf6fa | 2300 | |
0ec449ee DT |
2301 | /* |
2302 | * The main polling 'check' function, called FROM the edac core to perform the | |
2303 | * error checking and if an error is encountered, error processing. | |
2304 | */ | |
2305 | static void amd64_check(struct mem_ctl_info *mci) | |
2306 | { | |
ef44cc4c | 2307 | struct err_regs regs; |
0ec449ee | 2308 | |
549d042d BP |
2309 | if (amd64_get_error_info(mci, ®s)) { |
2310 | struct amd64_pvt *pvt = mci->pvt_info; | |
2311 | amd_decode_nb_mce(pvt->mc_node_id, ®s, 1); | |
2312 | } | |
0ec449ee DT |
2313 | } |
2314 | ||
2315 | /* | |
2316 | * Input: | |
2317 | * 1) struct amd64_pvt which contains pvt->dram_f2_ctl pointer | |
2318 | * 2) AMD Family index value | |
2319 | * | |
2320 | * Ouput: | |
2321 | * Upon return of 0, the following filled in: | |
2322 | * | |
2323 | * struct pvt->addr_f1_ctl | |
2324 | * struct pvt->misc_f3_ctl | |
2325 | * | |
2326 | * Filled in with related device funcitions of 'dram_f2_ctl' | |
2327 | * These devices are "reserved" via the pci_get_device() | |
2328 | * | |
2329 | * Upon return of 1 (error status): | |
2330 | * | |
2331 | * Nothing reserved | |
2332 | */ | |
2333 | static int amd64_reserve_mc_sibling_devices(struct amd64_pvt *pvt, int mc_idx) | |
2334 | { | |
2335 | const struct amd64_family_type *amd64_dev = &amd64_family_types[mc_idx]; | |
2336 | ||
2337 | /* Reserve the ADDRESS MAP Device */ | |
2338 | pvt->addr_f1_ctl = pci_get_related_function(pvt->dram_f2_ctl->vendor, | |
2339 | amd64_dev->addr_f1_ctl, | |
2340 | pvt->dram_f2_ctl); | |
2341 | ||
2342 | if (!pvt->addr_f1_ctl) { | |
2343 | amd64_printk(KERN_ERR, "error address map device not found: " | |
2344 | "vendor %x device 0x%x (broken BIOS?)\n", | |
2345 | PCI_VENDOR_ID_AMD, amd64_dev->addr_f1_ctl); | |
2346 | return 1; | |
2347 | } | |
2348 | ||
2349 | /* Reserve the MISC Device */ | |
2350 | pvt->misc_f3_ctl = pci_get_related_function(pvt->dram_f2_ctl->vendor, | |
2351 | amd64_dev->misc_f3_ctl, | |
2352 | pvt->dram_f2_ctl); | |
2353 | ||
2354 | if (!pvt->misc_f3_ctl) { | |
2355 | pci_dev_put(pvt->addr_f1_ctl); | |
2356 | pvt->addr_f1_ctl = NULL; | |
2357 | ||
2358 | amd64_printk(KERN_ERR, "error miscellaneous device not found: " | |
2359 | "vendor %x device 0x%x (broken BIOS?)\n", | |
2360 | PCI_VENDOR_ID_AMD, amd64_dev->misc_f3_ctl); | |
2361 | return 1; | |
2362 | } | |
2363 | ||
2364 | debugf1(" Addr Map device PCI Bus ID:\t%s\n", | |
2365 | pci_name(pvt->addr_f1_ctl)); | |
2366 | debugf1(" DRAM MEM-CTL PCI Bus ID:\t%s\n", | |
2367 | pci_name(pvt->dram_f2_ctl)); | |
2368 | debugf1(" Misc device PCI Bus ID:\t%s\n", | |
2369 | pci_name(pvt->misc_f3_ctl)); | |
2370 | ||
2371 | return 0; | |
2372 | } | |
2373 | ||
2374 | static void amd64_free_mc_sibling_devices(struct amd64_pvt *pvt) | |
2375 | { | |
2376 | pci_dev_put(pvt->addr_f1_ctl); | |
2377 | pci_dev_put(pvt->misc_f3_ctl); | |
2378 | } | |
2379 | ||
2380 | /* | |
2381 | * Retrieve the hardware registers of the memory controller (this includes the | |
2382 | * 'Address Map' and 'Misc' device regs) | |
2383 | */ | |
2384 | static void amd64_read_mc_registers(struct amd64_pvt *pvt) | |
2385 | { | |
2386 | u64 msr_val; | |
2387 | int dram, err = 0; | |
2388 | ||
2389 | /* | |
2390 | * Retrieve TOP_MEM and TOP_MEM2; no masking off of reserved bits since | |
2391 | * those are Read-As-Zero | |
2392 | */ | |
2393 | rdmsrl(MSR_K8_TOP_MEM1, msr_val); | |
2394 | pvt->top_mem = msr_val >> 23; | |
2395 | debugf0(" TOP_MEM=0x%08llx\n", pvt->top_mem); | |
2396 | ||
2397 | /* check first whether TOP_MEM2 is enabled */ | |
2398 | rdmsrl(MSR_K8_SYSCFG, msr_val); | |
2399 | if (msr_val & (1U << 21)) { | |
2400 | rdmsrl(MSR_K8_TOP_MEM2, msr_val); | |
2401 | pvt->top_mem2 = msr_val >> 23; | |
2402 | debugf0(" TOP_MEM2=0x%08llx\n", pvt->top_mem2); | |
2403 | } else | |
2404 | debugf0(" TOP_MEM2 disabled.\n"); | |
2405 | ||
2406 | amd64_cpu_display_info(pvt); | |
2407 | ||
2408 | err = pci_read_config_dword(pvt->misc_f3_ctl, K8_NBCAP, &pvt->nbcap); | |
2409 | if (err) | |
2410 | goto err_reg; | |
2411 | ||
2412 | if (pvt->ops->read_dram_ctl_register) | |
2413 | pvt->ops->read_dram_ctl_register(pvt); | |
2414 | ||
2415 | for (dram = 0; dram < DRAM_REG_COUNT; dram++) { | |
2416 | /* | |
2417 | * Call CPU specific READ function to get the DRAM Base and | |
2418 | * Limit values from the DCT. | |
2419 | */ | |
2420 | pvt->ops->read_dram_base_limit(pvt, dram); | |
2421 | ||
2422 | /* | |
2423 | * Only print out debug info on rows with both R and W Enabled. | |
2424 | * Normal processing, compiler should optimize this whole 'if' | |
2425 | * debug output block away. | |
2426 | */ | |
2427 | if (pvt->dram_rw_en[dram] != 0) { | |
2428 | debugf1(" DRAM_BASE[%d]: 0x%8.08x-%8.08x " | |
2429 | "DRAM_LIMIT: 0x%8.08x-%8.08x\n", | |
2430 | dram, | |
2431 | (u32)(pvt->dram_base[dram] >> 32), | |
2432 | (u32)(pvt->dram_base[dram] & 0xFFFFFFFF), | |
2433 | (u32)(pvt->dram_limit[dram] >> 32), | |
2434 | (u32)(pvt->dram_limit[dram] & 0xFFFFFFFF)); | |
2435 | debugf1(" IntlvEn=%s %s %s " | |
2436 | "IntlvSel=%d DstNode=%d\n", | |
2437 | pvt->dram_IntlvEn[dram] ? | |
2438 | "Enabled" : "Disabled", | |
2439 | (pvt->dram_rw_en[dram] & 0x2) ? "W" : "!W", | |
2440 | (pvt->dram_rw_en[dram] & 0x1) ? "R" : "!R", | |
2441 | pvt->dram_IntlvSel[dram], | |
2442 | pvt->dram_DstNode[dram]); | |
2443 | } | |
2444 | } | |
2445 | ||
2446 | amd64_read_dct_base_mask(pvt); | |
2447 | ||
2448 | err = pci_read_config_dword(pvt->addr_f1_ctl, K8_DHAR, &pvt->dhar); | |
2449 | if (err) | |
2450 | goto err_reg; | |
2451 | ||
2452 | amd64_read_dbam_reg(pvt); | |
2453 | ||
2454 | err = pci_read_config_dword(pvt->misc_f3_ctl, | |
2455 | F10_ONLINE_SPARE, &pvt->online_spare); | |
2456 | if (err) | |
2457 | goto err_reg; | |
2458 | ||
2459 | err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCLR_0, &pvt->dclr0); | |
2460 | if (err) | |
2461 | goto err_reg; | |
2462 | ||
2463 | err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCHR_0, &pvt->dchr0); | |
2464 | if (err) | |
2465 | goto err_reg; | |
2466 | ||
2467 | if (!dct_ganging_enabled(pvt)) { | |
2468 | err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCLR_1, | |
2469 | &pvt->dclr1); | |
2470 | if (err) | |
2471 | goto err_reg; | |
2472 | ||
2473 | err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCHR_1, | |
2474 | &pvt->dchr1); | |
2475 | if (err) | |
2476 | goto err_reg; | |
2477 | } | |
2478 | ||
2479 | amd64_dump_misc_regs(pvt); | |
2480 | ||
c2718348 DT |
2481 | return; |
2482 | ||
0ec449ee DT |
2483 | err_reg: |
2484 | debugf0("Reading an MC register failed\n"); | |
2485 | ||
2486 | } | |
2487 | ||
2488 | /* | |
2489 | * NOTE: CPU Revision Dependent code | |
2490 | * | |
2491 | * Input: | |
9d858bb1 | 2492 | * @csrow_nr ChipSelect Row Number (0..pvt->cs_count-1) |
0ec449ee DT |
2493 | * k8 private pointer to --> |
2494 | * DRAM Bank Address mapping register | |
2495 | * node_id | |
2496 | * DCL register where dual_channel_active is | |
2497 | * | |
2498 | * The DBAM register consists of 4 sets of 4 bits each definitions: | |
2499 | * | |
2500 | * Bits: CSROWs | |
2501 | * 0-3 CSROWs 0 and 1 | |
2502 | * 4-7 CSROWs 2 and 3 | |
2503 | * 8-11 CSROWs 4 and 5 | |
2504 | * 12-15 CSROWs 6 and 7 | |
2505 | * | |
2506 | * Values range from: 0 to 15 | |
2507 | * The meaning of the values depends on CPU revision and dual-channel state, | |
2508 | * see relevant BKDG more info. | |
2509 | * | |
2510 | * The memory controller provides for total of only 8 CSROWs in its current | |
2511 | * architecture. Each "pair" of CSROWs normally represents just one DIMM in | |
2512 | * single channel or two (2) DIMMs in dual channel mode. | |
2513 | * | |
2514 | * The following code logic collapses the various tables for CSROW based on CPU | |
2515 | * revision. | |
2516 | * | |
2517 | * Returns: | |
2518 | * The number of PAGE_SIZE pages on the specified CSROW number it | |
2519 | * encompasses | |
2520 | * | |
2521 | */ | |
2522 | static u32 amd64_csrow_nr_pages(int csrow_nr, struct amd64_pvt *pvt) | |
2523 | { | |
2524 | u32 dram_map, nr_pages; | |
2525 | ||
2526 | /* | |
2527 | * The math on this doesn't look right on the surface because x/2*4 can | |
2528 | * be simplified to x*2 but this expression makes use of the fact that | |
2529 | * it is integral math where 1/2=0. This intermediate value becomes the | |
2530 | * number of bits to shift the DBAM register to extract the proper CSROW | |
2531 | * field. | |
2532 | */ | |
2533 | dram_map = (pvt->dbam0 >> ((csrow_nr / 2) * 4)) & 0xF; | |
2534 | ||
2535 | nr_pages = pvt->ops->dbam_map_to_pages(pvt, dram_map); | |
2536 | ||
2537 | /* | |
2538 | * If dual channel then double the memory size of single channel. | |
2539 | * Channel count is 1 or 2 | |
2540 | */ | |
2541 | nr_pages <<= (pvt->channel_count - 1); | |
2542 | ||
2543 | debugf0(" (csrow=%d) DBAM map index= %d\n", csrow_nr, dram_map); | |
2544 | debugf0(" nr_pages= %u channel-count = %d\n", | |
2545 | nr_pages, pvt->channel_count); | |
2546 | ||
2547 | return nr_pages; | |
2548 | } | |
2549 | ||
2550 | /* | |
2551 | * Initialize the array of csrow attribute instances, based on the values | |
2552 | * from pci config hardware registers. | |
2553 | */ | |
2554 | static int amd64_init_csrows(struct mem_ctl_info *mci) | |
2555 | { | |
2556 | struct csrow_info *csrow; | |
2557 | struct amd64_pvt *pvt; | |
2558 | u64 input_addr_min, input_addr_max, sys_addr; | |
2559 | int i, err = 0, empty = 1; | |
2560 | ||
2561 | pvt = mci->pvt_info; | |
2562 | ||
2563 | err = pci_read_config_dword(pvt->misc_f3_ctl, K8_NBCFG, &pvt->nbcfg); | |
2564 | if (err) | |
2565 | debugf0("Reading K8_NBCFG failed\n"); | |
2566 | ||
2567 | debugf0("NBCFG= 0x%x CHIPKILL= %s DRAM ECC= %s\n", pvt->nbcfg, | |
2568 | (pvt->nbcfg & K8_NBCFG_CHIPKILL) ? "Enabled" : "Disabled", | |
2569 | (pvt->nbcfg & K8_NBCFG_ECC_ENABLE) ? "Enabled" : "Disabled" | |
2570 | ); | |
2571 | ||
9d858bb1 | 2572 | for (i = 0; i < pvt->cs_count; i++) { |
0ec449ee DT |
2573 | csrow = &mci->csrows[i]; |
2574 | ||
2575 | if ((pvt->dcsb0[i] & K8_DCSB_CS_ENABLE) == 0) { | |
2576 | debugf1("----CSROW %d EMPTY for node %d\n", i, | |
2577 | pvt->mc_node_id); | |
2578 | continue; | |
2579 | } | |
2580 | ||
2581 | debugf1("----CSROW %d VALID for MC node %d\n", | |
2582 | i, pvt->mc_node_id); | |
2583 | ||
2584 | empty = 0; | |
2585 | csrow->nr_pages = amd64_csrow_nr_pages(i, pvt); | |
2586 | find_csrow_limits(mci, i, &input_addr_min, &input_addr_max); | |
2587 | sys_addr = input_addr_to_sys_addr(mci, input_addr_min); | |
2588 | csrow->first_page = (u32) (sys_addr >> PAGE_SHIFT); | |
2589 | sys_addr = input_addr_to_sys_addr(mci, input_addr_max); | |
2590 | csrow->last_page = (u32) (sys_addr >> PAGE_SHIFT); | |
2591 | csrow->page_mask = ~mask_from_dct_mask(pvt, i); | |
2592 | /* 8 bytes of resolution */ | |
2593 | ||
2594 | csrow->mtype = amd64_determine_memory_type(pvt); | |
2595 | ||
2596 | debugf1(" for MC node %d csrow %d:\n", pvt->mc_node_id, i); | |
2597 | debugf1(" input_addr_min: 0x%lx input_addr_max: 0x%lx\n", | |
2598 | (unsigned long)input_addr_min, | |
2599 | (unsigned long)input_addr_max); | |
2600 | debugf1(" sys_addr: 0x%lx page_mask: 0x%lx\n", | |
2601 | (unsigned long)sys_addr, csrow->page_mask); | |
2602 | debugf1(" nr_pages: %u first_page: 0x%lx " | |
2603 | "last_page: 0x%lx\n", | |
2604 | (unsigned)csrow->nr_pages, | |
2605 | csrow->first_page, csrow->last_page); | |
2606 | ||
2607 | /* | |
2608 | * determine whether CHIPKILL or JUST ECC or NO ECC is operating | |
2609 | */ | |
2610 | if (pvt->nbcfg & K8_NBCFG_ECC_ENABLE) | |
2611 | csrow->edac_mode = | |
2612 | (pvt->nbcfg & K8_NBCFG_CHIPKILL) ? | |
2613 | EDAC_S4ECD4ED : EDAC_SECDED; | |
2614 | else | |
2615 | csrow->edac_mode = EDAC_NONE; | |
2616 | } | |
2617 | ||
2618 | return empty; | |
2619 | } | |
d27bf6fa | 2620 | |
f9431992 DT |
2621 | /* |
2622 | * Only if 'ecc_enable_override' is set AND BIOS had ECC disabled, do "we" | |
2623 | * enable it. | |
2624 | */ | |
2625 | static void amd64_enable_ecc_error_reporting(struct mem_ctl_info *mci) | |
2626 | { | |
2627 | struct amd64_pvt *pvt = mci->pvt_info; | |
2628 | const cpumask_t *cpumask = cpumask_of_node(pvt->mc_node_id); | |
2629 | int cpu, idx = 0, err = 0; | |
2630 | struct msr msrs[cpumask_weight(cpumask)]; | |
2631 | u32 value; | |
2632 | u32 mask = K8_NBCTL_CECCEn | K8_NBCTL_UECCEn; | |
2633 | ||
2634 | if (!ecc_enable_override) | |
2635 | return; | |
2636 | ||
2637 | memset(msrs, 0, sizeof(msrs)); | |
2638 | ||
2639 | amd64_printk(KERN_WARNING, | |
2640 | "'ecc_enable_override' parameter is active, " | |
2641 | "Enabling AMD ECC hardware now: CAUTION\n"); | |
2642 | ||
2643 | err = pci_read_config_dword(pvt->misc_f3_ctl, K8_NBCTL, &value); | |
2644 | if (err) | |
2645 | debugf0("Reading K8_NBCTL failed\n"); | |
2646 | ||
2647 | /* turn on UECCn and CECCEn bits */ | |
2648 | pvt->old_nbctl = value & mask; | |
2649 | pvt->nbctl_mcgctl_saved = 1; | |
2650 | ||
2651 | value |= mask; | |
2652 | pci_write_config_dword(pvt->misc_f3_ctl, K8_NBCTL, value); | |
2653 | ||
2654 | rdmsr_on_cpus(cpumask, K8_MSR_MCGCTL, msrs); | |
2655 | ||
2656 | for_each_cpu(cpu, cpumask) { | |
2657 | if (msrs[idx].l & K8_MSR_MCGCTL_NBE) | |
2658 | set_bit(idx, &pvt->old_mcgctl); | |
2659 | ||
2660 | msrs[idx].l |= K8_MSR_MCGCTL_NBE; | |
2661 | idx++; | |
2662 | } | |
2663 | wrmsr_on_cpus(cpumask, K8_MSR_MCGCTL, msrs); | |
2664 | ||
2665 | err = pci_read_config_dword(pvt->misc_f3_ctl, K8_NBCFG, &value); | |
2666 | if (err) | |
2667 | debugf0("Reading K8_NBCFG failed\n"); | |
2668 | ||
2669 | debugf0("NBCFG(1)= 0x%x CHIPKILL= %s ECC_ENABLE= %s\n", value, | |
2670 | (value & K8_NBCFG_CHIPKILL) ? "Enabled" : "Disabled", | |
2671 | (value & K8_NBCFG_ECC_ENABLE) ? "Enabled" : "Disabled"); | |
2672 | ||
2673 | if (!(value & K8_NBCFG_ECC_ENABLE)) { | |
2674 | amd64_printk(KERN_WARNING, | |
2675 | "This node reports that DRAM ECC is " | |
2676 | "currently Disabled; ENABLING now\n"); | |
2677 | ||
2678 | /* Attempt to turn on DRAM ECC Enable */ | |
2679 | value |= K8_NBCFG_ECC_ENABLE; | |
2680 | pci_write_config_dword(pvt->misc_f3_ctl, K8_NBCFG, value); | |
2681 | ||
2682 | err = pci_read_config_dword(pvt->misc_f3_ctl, K8_NBCFG, &value); | |
2683 | if (err) | |
2684 | debugf0("Reading K8_NBCFG failed\n"); | |
2685 | ||
2686 | if (!(value & K8_NBCFG_ECC_ENABLE)) { | |
2687 | amd64_printk(KERN_WARNING, | |
2688 | "Hardware rejects Enabling DRAM ECC checking\n" | |
2689 | "Check memory DIMM configuration\n"); | |
2690 | } else { | |
2691 | amd64_printk(KERN_DEBUG, | |
2692 | "Hardware accepted DRAM ECC Enable\n"); | |
2693 | } | |
2694 | } | |
2695 | debugf0("NBCFG(2)= 0x%x CHIPKILL= %s ECC_ENABLE= %s\n", value, | |
2696 | (value & K8_NBCFG_CHIPKILL) ? "Enabled" : "Disabled", | |
2697 | (value & K8_NBCFG_ECC_ENABLE) ? "Enabled" : "Disabled"); | |
2698 | ||
2699 | pvt->ctl_error_info.nbcfg = value; | |
2700 | } | |
2701 | ||
2702 | static void amd64_restore_ecc_error_reporting(struct amd64_pvt *pvt) | |
2703 | { | |
2704 | const cpumask_t *cpumask = cpumask_of_node(pvt->mc_node_id); | |
2705 | int cpu, idx = 0, err = 0; | |
2706 | struct msr msrs[cpumask_weight(cpumask)]; | |
2707 | u32 value; | |
2708 | u32 mask = K8_NBCTL_CECCEn | K8_NBCTL_UECCEn; | |
2709 | ||
2710 | if (!pvt->nbctl_mcgctl_saved) | |
2711 | return; | |
2712 | ||
2713 | memset(msrs, 0, sizeof(msrs)); | |
2714 | ||
2715 | err = pci_read_config_dword(pvt->misc_f3_ctl, K8_NBCTL, &value); | |
2716 | if (err) | |
2717 | debugf0("Reading K8_NBCTL failed\n"); | |
2718 | value &= ~mask; | |
2719 | value |= pvt->old_nbctl; | |
2720 | ||
2721 | /* restore the NB Enable MCGCTL bit */ | |
2722 | pci_write_config_dword(pvt->misc_f3_ctl, K8_NBCTL, value); | |
2723 | ||
2724 | rdmsr_on_cpus(cpumask, K8_MSR_MCGCTL, msrs); | |
2725 | ||
2726 | for_each_cpu(cpu, cpumask) { | |
2727 | msrs[idx].l &= ~K8_MSR_MCGCTL_NBE; | |
2728 | msrs[idx].l |= | |
2729 | test_bit(idx, &pvt->old_mcgctl) << K8_MSR_MCGCTL_NBE; | |
2730 | idx++; | |
2731 | } | |
2732 | ||
2733 | wrmsr_on_cpus(cpumask, K8_MSR_MCGCTL, msrs); | |
2734 | } | |
2735 | ||
06724535 BP |
2736 | /* get all cores on this DCT */ |
2737 | static void get_cpus_on_this_dct_cpumask(cpumask_t *mask, int nid) | |
f9431992 | 2738 | { |
06724535 | 2739 | int cpu; |
f9431992 | 2740 | |
06724535 BP |
2741 | for_each_online_cpu(cpu) |
2742 | if (amd_get_nb_id(cpu) == nid) | |
2743 | cpumask_set_cpu(cpu, mask); | |
f9431992 DT |
2744 | } |
2745 | ||
2746 | /* check MCG_CTL on all the cpus on this node */ | |
06724535 | 2747 | static bool amd64_nb_mce_bank_enabled_on_node(int nid) |
f9431992 | 2748 | { |
06724535 BP |
2749 | cpumask_t mask; |
2750 | struct msr *msrs; | |
2751 | int cpu, nbe, idx = 0; | |
2752 | bool ret = false; | |
2753 | ||
2754 | cpumask_clear(&mask); | |
2755 | ||
2756 | get_cpus_on_this_dct_cpumask(&mask, nid); | |
2757 | ||
2758 | msrs = kzalloc(sizeof(struct msr) * cpumask_weight(&mask), GFP_KERNEL); | |
2759 | if (!msrs) { | |
2760 | amd64_printk(KERN_WARNING, "%s: error allocating msrs\n", | |
2761 | __func__); | |
2762 | return false; | |
2763 | } | |
2764 | ||
2765 | rdmsr_on_cpus(&mask, MSR_IA32_MCG_CTL, msrs); | |
2766 | ||
2767 | for_each_cpu(cpu, &mask) { | |
2768 | nbe = msrs[idx].l & K8_MSR_MCGCTL_NBE; | |
2769 | ||
2770 | debugf0("core: %u, MCG_CTL: 0x%llx, NB MSR is %s\n", | |
2771 | cpu, msrs[idx].q, | |
2772 | (nbe ? "enabled" : "disabled")); | |
2773 | ||
2774 | if (!nbe) | |
2775 | goto out; | |
2776 | ||
2777 | idx++; | |
2778 | } | |
2779 | ret = true; | |
f9431992 | 2780 | |
06724535 BP |
2781 | out: |
2782 | kfree(msrs); | |
f9431992 DT |
2783 | return ret; |
2784 | } | |
2785 | ||
2786 | /* | |
2787 | * EDAC requires that the BIOS have ECC enabled before taking over the | |
2788 | * processing of ECC errors. This is because the BIOS can properly initialize | |
2789 | * the memory system completely. A command line option allows to force-enable | |
2790 | * hardware ECC later in amd64_enable_ecc_error_reporting(). | |
2791 | */ | |
be3468e8 BP |
2792 | static const char *ecc_warning = |
2793 | "WARNING: ECC is disabled by BIOS. Module will NOT be loaded.\n" | |
2794 | " Either Enable ECC in the BIOS, or set 'ecc_enable_override'.\n" | |
2795 | " Also, use of the override can cause unknown side effects.\n"; | |
2796 | ||
f9431992 DT |
2797 | static int amd64_check_ecc_enabled(struct amd64_pvt *pvt) |
2798 | { | |
2799 | u32 value; | |
be3468e8 | 2800 | int err = 0; |
06724535 BP |
2801 | u8 ecc_enabled = 0; |
2802 | bool nb_mce_en = false; | |
f9431992 DT |
2803 | |
2804 | err = pci_read_config_dword(pvt->misc_f3_ctl, K8_NBCFG, &value); | |
2805 | if (err) | |
2806 | debugf0("Reading K8_NBCTL failed\n"); | |
2807 | ||
2808 | ecc_enabled = !!(value & K8_NBCFG_ECC_ENABLE); | |
be3468e8 BP |
2809 | if (!ecc_enabled) |
2810 | amd64_printk(KERN_WARNING, "This node reports that Memory ECC " | |
2811 | "is currently disabled, set F3x%x[22] (%s).\n", | |
2812 | K8_NBCFG, pci_name(pvt->misc_f3_ctl)); | |
2813 | else | |
2814 | amd64_printk(KERN_INFO, "ECC is enabled by BIOS.\n"); | |
f9431992 | 2815 | |
06724535 BP |
2816 | nb_mce_en = amd64_nb_mce_bank_enabled_on_node(pvt->mc_node_id); |
2817 | if (!nb_mce_en) | |
be3468e8 BP |
2818 | amd64_printk(KERN_WARNING, "NB MCE bank disabled, set MSR " |
2819 | "0x%08x[4] on node %d to enable.\n", | |
2820 | MSR_IA32_MCG_CTL, pvt->mc_node_id); | |
f9431992 | 2821 | |
06724535 | 2822 | if (!ecc_enabled || !nb_mce_en) { |
f9431992 | 2823 | if (!ecc_enable_override) { |
be3468e8 BP |
2824 | amd64_printk(KERN_WARNING, "%s", ecc_warning); |
2825 | return -ENODEV; | |
2826 | } | |
2827 | } else | |
f9431992 DT |
2828 | /* CLEAR the override, since BIOS controlled it */ |
2829 | ecc_enable_override = 0; | |
f9431992 | 2830 | |
be3468e8 | 2831 | return 0; |
f9431992 DT |
2832 | } |
2833 | ||
7d6034d3 DT |
2834 | struct mcidev_sysfs_attribute sysfs_attrs[ARRAY_SIZE(amd64_dbg_attrs) + |
2835 | ARRAY_SIZE(amd64_inj_attrs) + | |
2836 | 1]; | |
2837 | ||
2838 | struct mcidev_sysfs_attribute terminator = { .attr = { .name = NULL } }; | |
2839 | ||
2840 | static void amd64_set_mc_sysfs_attributes(struct mem_ctl_info *mci) | |
2841 | { | |
2842 | unsigned int i = 0, j = 0; | |
2843 | ||
2844 | for (; i < ARRAY_SIZE(amd64_dbg_attrs); i++) | |
2845 | sysfs_attrs[i] = amd64_dbg_attrs[i]; | |
2846 | ||
2847 | for (j = 0; j < ARRAY_SIZE(amd64_inj_attrs); j++, i++) | |
2848 | sysfs_attrs[i] = amd64_inj_attrs[j]; | |
2849 | ||
2850 | sysfs_attrs[i] = terminator; | |
2851 | ||
2852 | mci->mc_driver_sysfs_attributes = sysfs_attrs; | |
2853 | } | |
2854 | ||
2855 | static void amd64_setup_mci_misc_attributes(struct mem_ctl_info *mci) | |
2856 | { | |
2857 | struct amd64_pvt *pvt = mci->pvt_info; | |
2858 | ||
2859 | mci->mtype_cap = MEM_FLAG_DDR2 | MEM_FLAG_RDDR2; | |
2860 | mci->edac_ctl_cap = EDAC_FLAG_NONE; | |
7d6034d3 DT |
2861 | |
2862 | if (pvt->nbcap & K8_NBCAP_SECDED) | |
2863 | mci->edac_ctl_cap |= EDAC_FLAG_SECDED; | |
2864 | ||
2865 | if (pvt->nbcap & K8_NBCAP_CHIPKILL) | |
2866 | mci->edac_ctl_cap |= EDAC_FLAG_S4ECD4ED; | |
2867 | ||
2868 | mci->edac_cap = amd64_determine_edac_cap(pvt); | |
2869 | mci->mod_name = EDAC_MOD_STR; | |
2870 | mci->mod_ver = EDAC_AMD64_VERSION; | |
2871 | mci->ctl_name = get_amd_family_name(pvt->mc_type_index); | |
2872 | mci->dev_name = pci_name(pvt->dram_f2_ctl); | |
2873 | mci->ctl_page_to_phys = NULL; | |
2874 | ||
2875 | /* IMPORTANT: Set the polling 'check' function in this module */ | |
2876 | mci->edac_check = amd64_check; | |
2877 | ||
2878 | /* memory scrubber interface */ | |
2879 | mci->set_sdram_scrub_rate = amd64_set_scrub_rate; | |
2880 | mci->get_sdram_scrub_rate = amd64_get_scrub_rate; | |
2881 | } | |
2882 | ||
2883 | /* | |
2884 | * Init stuff for this DRAM Controller device. | |
2885 | * | |
2886 | * Due to a hardware feature on Fam10h CPUs, the Enable Extended Configuration | |
2887 | * Space feature MUST be enabled on ALL Processors prior to actually reading | |
2888 | * from the ECS registers. Since the loading of the module can occur on any | |
2889 | * 'core', and cores don't 'see' all the other processors ECS data when the | |
2890 | * others are NOT enabled. Our solution is to first enable ECS access in this | |
2891 | * routine on all processors, gather some data in a amd64_pvt structure and | |
2892 | * later come back in a finish-setup function to perform that final | |
2893 | * initialization. See also amd64_init_2nd_stage() for that. | |
2894 | */ | |
2895 | static int amd64_probe_one_instance(struct pci_dev *dram_f2_ctl, | |
2896 | int mc_type_index) | |
2897 | { | |
2898 | struct amd64_pvt *pvt = NULL; | |
2899 | int err = 0, ret; | |
2900 | ||
2901 | ret = -ENOMEM; | |
2902 | pvt = kzalloc(sizeof(struct amd64_pvt), GFP_KERNEL); | |
2903 | if (!pvt) | |
2904 | goto err_exit; | |
2905 | ||
37da0450 | 2906 | pvt->mc_node_id = get_node_id(dram_f2_ctl); |
7d6034d3 DT |
2907 | |
2908 | pvt->dram_f2_ctl = dram_f2_ctl; | |
2909 | pvt->ext_model = boot_cpu_data.x86_model >> 4; | |
2910 | pvt->mc_type_index = mc_type_index; | |
2911 | pvt->ops = family_ops(mc_type_index); | |
2912 | pvt->old_mcgctl = 0; | |
2913 | ||
2914 | /* | |
2915 | * We have the dram_f2_ctl device as an argument, now go reserve its | |
2916 | * sibling devices from the PCI system. | |
2917 | */ | |
2918 | ret = -ENODEV; | |
2919 | err = amd64_reserve_mc_sibling_devices(pvt, mc_type_index); | |
2920 | if (err) | |
2921 | goto err_free; | |
2922 | ||
2923 | ret = -EINVAL; | |
2924 | err = amd64_check_ecc_enabled(pvt); | |
2925 | if (err) | |
2926 | goto err_put; | |
2927 | ||
2928 | /* | |
2929 | * Key operation here: setup of HW prior to performing ops on it. Some | |
2930 | * setup is required to access ECS data. After this is performed, the | |
2931 | * 'teardown' function must be called upon error and normal exit paths. | |
2932 | */ | |
2933 | if (boot_cpu_data.x86 >= 0x10) | |
2934 | amd64_setup(pvt); | |
2935 | ||
2936 | /* | |
2937 | * Save the pointer to the private data for use in 2nd initialization | |
2938 | * stage | |
2939 | */ | |
2940 | pvt_lookup[pvt->mc_node_id] = pvt; | |
2941 | ||
2942 | return 0; | |
2943 | ||
2944 | err_put: | |
2945 | amd64_free_mc_sibling_devices(pvt); | |
2946 | ||
2947 | err_free: | |
2948 | kfree(pvt); | |
2949 | ||
2950 | err_exit: | |
2951 | return ret; | |
2952 | } | |
2953 | ||
2954 | /* | |
2955 | * This is the finishing stage of the init code. Needs to be performed after all | |
2956 | * MCs' hardware have been prepped for accessing extended config space. | |
2957 | */ | |
2958 | static int amd64_init_2nd_stage(struct amd64_pvt *pvt) | |
2959 | { | |
2960 | int node_id = pvt->mc_node_id; | |
2961 | struct mem_ctl_info *mci; | |
2962 | int ret, err = 0; | |
2963 | ||
2964 | amd64_read_mc_registers(pvt); | |
2965 | ||
2966 | ret = -ENODEV; | |
2967 | if (pvt->ops->probe_valid_hardware) { | |
2968 | err = pvt->ops->probe_valid_hardware(pvt); | |
2969 | if (err) | |
2970 | goto err_exit; | |
2971 | } | |
2972 | ||
2973 | /* | |
2974 | * We need to determine how many memory channels there are. Then use | |
2975 | * that information for calculating the size of the dynamic instance | |
2976 | * tables in the 'mci' structure | |
2977 | */ | |
2978 | pvt->channel_count = pvt->ops->early_channel_count(pvt); | |
2979 | if (pvt->channel_count < 0) | |
2980 | goto err_exit; | |
2981 | ||
2982 | ret = -ENOMEM; | |
9d858bb1 | 2983 | mci = edac_mc_alloc(0, pvt->cs_count, pvt->channel_count, node_id); |
7d6034d3 DT |
2984 | if (!mci) |
2985 | goto err_exit; | |
2986 | ||
2987 | mci->pvt_info = pvt; | |
2988 | ||
2989 | mci->dev = &pvt->dram_f2_ctl->dev; | |
2990 | amd64_setup_mci_misc_attributes(mci); | |
2991 | ||
2992 | if (amd64_init_csrows(mci)) | |
2993 | mci->edac_cap = EDAC_FLAG_NONE; | |
2994 | ||
2995 | amd64_enable_ecc_error_reporting(mci); | |
2996 | amd64_set_mc_sysfs_attributes(mci); | |
2997 | ||
2998 | ret = -ENODEV; | |
2999 | if (edac_mc_add_mc(mci)) { | |
3000 | debugf1("failed edac_mc_add_mc()\n"); | |
3001 | goto err_add_mc; | |
3002 | } | |
3003 | ||
3004 | mci_lookup[node_id] = mci; | |
3005 | pvt_lookup[node_id] = NULL; | |
549d042d BP |
3006 | |
3007 | /* register stuff with EDAC MCE */ | |
3008 | if (report_gart_errors) | |
3009 | amd_report_gart_errors(true); | |
3010 | ||
3011 | amd_register_ecc_decoder(amd64_decode_bus_error); | |
3012 | ||
7d6034d3 DT |
3013 | return 0; |
3014 | ||
3015 | err_add_mc: | |
3016 | edac_mc_free(mci); | |
3017 | ||
3018 | err_exit: | |
3019 | debugf0("failure to init 2nd stage: ret=%d\n", ret); | |
3020 | ||
3021 | amd64_restore_ecc_error_reporting(pvt); | |
3022 | ||
3023 | if (boot_cpu_data.x86 > 0xf) | |
3024 | amd64_teardown(pvt); | |
3025 | ||
3026 | amd64_free_mc_sibling_devices(pvt); | |
3027 | ||
3028 | kfree(pvt_lookup[pvt->mc_node_id]); | |
3029 | pvt_lookup[node_id] = NULL; | |
3030 | ||
3031 | return ret; | |
3032 | } | |
3033 | ||
3034 | ||
3035 | static int __devinit amd64_init_one_instance(struct pci_dev *pdev, | |
3036 | const struct pci_device_id *mc_type) | |
3037 | { | |
3038 | int ret = 0; | |
3039 | ||
37da0450 | 3040 | debugf0("(MC node=%d,mc_type='%s')\n", get_node_id(pdev), |
7d6034d3 DT |
3041 | get_amd_family_name(mc_type->driver_data)); |
3042 | ||
3043 | ret = pci_enable_device(pdev); | |
3044 | if (ret < 0) | |
3045 | ret = -EIO; | |
3046 | else | |
3047 | ret = amd64_probe_one_instance(pdev, mc_type->driver_data); | |
3048 | ||
3049 | if (ret < 0) | |
3050 | debugf0("ret=%d\n", ret); | |
3051 | ||
3052 | return ret; | |
3053 | } | |
3054 | ||
3055 | static void __devexit amd64_remove_one_instance(struct pci_dev *pdev) | |
3056 | { | |
3057 | struct mem_ctl_info *mci; | |
3058 | struct amd64_pvt *pvt; | |
3059 | ||
3060 | /* Remove from EDAC CORE tracking list */ | |
3061 | mci = edac_mc_del_mc(&pdev->dev); | |
3062 | if (!mci) | |
3063 | return; | |
3064 | ||
3065 | pvt = mci->pvt_info; | |
3066 | ||
3067 | amd64_restore_ecc_error_reporting(pvt); | |
3068 | ||
3069 | if (boot_cpu_data.x86 > 0xf) | |
3070 | amd64_teardown(pvt); | |
3071 | ||
3072 | amd64_free_mc_sibling_devices(pvt); | |
3073 | ||
3074 | kfree(pvt); | |
3075 | mci->pvt_info = NULL; | |
3076 | ||
3077 | mci_lookup[pvt->mc_node_id] = NULL; | |
3078 | ||
549d042d BP |
3079 | /* unregister from EDAC MCE */ |
3080 | amd_report_gart_errors(false); | |
3081 | amd_unregister_ecc_decoder(amd64_decode_bus_error); | |
3082 | ||
7d6034d3 DT |
3083 | /* Free the EDAC CORE resources */ |
3084 | edac_mc_free(mci); | |
3085 | } | |
3086 | ||
3087 | /* | |
3088 | * This table is part of the interface for loading drivers for PCI devices. The | |
3089 | * PCI core identifies what devices are on a system during boot, and then | |
3090 | * inquiry this table to see if this driver is for a given device found. | |
3091 | */ | |
3092 | static const struct pci_device_id amd64_pci_table[] __devinitdata = { | |
3093 | { | |
3094 | .vendor = PCI_VENDOR_ID_AMD, | |
3095 | .device = PCI_DEVICE_ID_AMD_K8_NB_MEMCTL, | |
3096 | .subvendor = PCI_ANY_ID, | |
3097 | .subdevice = PCI_ANY_ID, | |
3098 | .class = 0, | |
3099 | .class_mask = 0, | |
3100 | .driver_data = K8_CPUS | |
3101 | }, | |
3102 | { | |
3103 | .vendor = PCI_VENDOR_ID_AMD, | |
3104 | .device = PCI_DEVICE_ID_AMD_10H_NB_DRAM, | |
3105 | .subvendor = PCI_ANY_ID, | |
3106 | .subdevice = PCI_ANY_ID, | |
3107 | .class = 0, | |
3108 | .class_mask = 0, | |
3109 | .driver_data = F10_CPUS | |
3110 | }, | |
3111 | { | |
3112 | .vendor = PCI_VENDOR_ID_AMD, | |
3113 | .device = PCI_DEVICE_ID_AMD_11H_NB_DRAM, | |
3114 | .subvendor = PCI_ANY_ID, | |
3115 | .subdevice = PCI_ANY_ID, | |
3116 | .class = 0, | |
3117 | .class_mask = 0, | |
3118 | .driver_data = F11_CPUS | |
3119 | }, | |
3120 | {0, } | |
3121 | }; | |
3122 | MODULE_DEVICE_TABLE(pci, amd64_pci_table); | |
3123 | ||
3124 | static struct pci_driver amd64_pci_driver = { | |
3125 | .name = EDAC_MOD_STR, | |
3126 | .probe = amd64_init_one_instance, | |
3127 | .remove = __devexit_p(amd64_remove_one_instance), | |
3128 | .id_table = amd64_pci_table, | |
3129 | }; | |
3130 | ||
3131 | static void amd64_setup_pci_device(void) | |
3132 | { | |
3133 | struct mem_ctl_info *mci; | |
3134 | struct amd64_pvt *pvt; | |
3135 | ||
3136 | if (amd64_ctl_pci) | |
3137 | return; | |
3138 | ||
3139 | mci = mci_lookup[0]; | |
3140 | if (mci) { | |
3141 | ||
3142 | pvt = mci->pvt_info; | |
3143 | amd64_ctl_pci = | |
3144 | edac_pci_create_generic_ctl(&pvt->dram_f2_ctl->dev, | |
3145 | EDAC_MOD_STR); | |
3146 | ||
3147 | if (!amd64_ctl_pci) { | |
3148 | pr_warning("%s(): Unable to create PCI control\n", | |
3149 | __func__); | |
3150 | ||
3151 | pr_warning("%s(): PCI error report via EDAC not set\n", | |
3152 | __func__); | |
3153 | } | |
3154 | } | |
3155 | } | |
3156 | ||
3157 | static int __init amd64_edac_init(void) | |
3158 | { | |
3159 | int nb, err = -ENODEV; | |
3160 | ||
3161 | edac_printk(KERN_INFO, EDAC_MOD_STR, EDAC_AMD64_VERSION "\n"); | |
3162 | ||
3163 | opstate_init(); | |
3164 | ||
3165 | if (cache_k8_northbridges() < 0) | |
3166 | goto err_exit; | |
3167 | ||
3168 | err = pci_register_driver(&amd64_pci_driver); | |
3169 | if (err) | |
3170 | return err; | |
3171 | ||
3172 | /* | |
3173 | * At this point, the array 'pvt_lookup[]' contains pointers to alloc'd | |
3174 | * amd64_pvt structs. These will be used in the 2nd stage init function | |
3175 | * to finish initialization of the MC instances. | |
3176 | */ | |
3177 | for (nb = 0; nb < num_k8_northbridges; nb++) { | |
3178 | if (!pvt_lookup[nb]) | |
3179 | continue; | |
3180 | ||
3181 | err = amd64_init_2nd_stage(pvt_lookup[nb]); | |
3182 | if (err) | |
37da0450 | 3183 | goto err_2nd_stage; |
7d6034d3 DT |
3184 | } |
3185 | ||
3186 | amd64_setup_pci_device(); | |
3187 | ||
3188 | return 0; | |
3189 | ||
37da0450 BP |
3190 | err_2nd_stage: |
3191 | debugf0("2nd stage failed\n"); | |
3192 | ||
7d6034d3 | 3193 | err_exit: |
7d6034d3 DT |
3194 | pci_unregister_driver(&amd64_pci_driver); |
3195 | ||
3196 | return err; | |
3197 | } | |
3198 | ||
3199 | static void __exit amd64_edac_exit(void) | |
3200 | { | |
3201 | if (amd64_ctl_pci) | |
3202 | edac_pci_release_generic_ctl(amd64_ctl_pci); | |
3203 | ||
3204 | pci_unregister_driver(&amd64_pci_driver); | |
3205 | } | |
3206 | ||
3207 | module_init(amd64_edac_init); | |
3208 | module_exit(amd64_edac_exit); | |
3209 | ||
3210 | MODULE_LICENSE("GPL"); | |
3211 | MODULE_AUTHOR("SoftwareBitMaker: Doug Thompson, " | |
3212 | "Dave Peterson, Thayne Harbaugh"); | |
3213 | MODULE_DESCRIPTION("MC support for AMD64 memory controllers - " | |
3214 | EDAC_AMD64_VERSION); | |
3215 | ||
3216 | module_param(edac_op_state, int, 0444); | |
3217 | MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); |