[mirror_ubuntu-artful-kernel.git] / drivers / edac / i82975x_edac.c

/*
 * Intel 82975X Memory Controller kernel module
 * (C) 2007 aCarLab (India) Pvt. Ltd. (http://acarlab.com)
 * (C) 2007 jetzbroadband (http://jetzbroadband.com)
 * This file may be distributed under the terms of the
 * GNU General Public License.
 *
 * Written by Arvind R.
 *   Copied from i82875p_edac.c source:
 */

#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
#include <linux/edac.h>
#include "edac_module.h"

#define I82975X_REVISION	" Ver: 1.0.0"
#define EDAC_MOD_STR		"i82975x_edac"

#define i82975x_printk(level, fmt, arg...) \
	edac_printk(level, "i82975x", fmt, ##arg)

#define i82975x_mc_printk(mci, level, fmt, arg...) \
	edac_mc_chipset_printk(mci, level, "i82975x", fmt, ##arg)

#ifndef PCI_DEVICE_ID_INTEL_82975_0
#define PCI_DEVICE_ID_INTEL_82975_0	0x277c
#endif				/* PCI_DEVICE_ID_INTEL_82975_0 */

#define I82975X_NR_DIMMS		8
#define I82975X_NR_CSROWS(nr_chans)	(I82975X_NR_DIMMS / (nr_chans))

/* Intel 82975X register addresses - device 0 function 0 - DRAM Controller */
#define I82975X_EAP		0x58	/* Dram Error Address Pointer (32b)
					 *
					 * 31:7  128 byte cache-line address
					 * 6:1   reserved
					 * 0     0: CH0; 1: CH1
					 */

#define I82975X_DERRSYN		0x5c	/* Dram Error SYNdrome (8b)
					 *
					 *  7:0  DRAM ECC Syndrome
					 */

#define I82975X_DES		0x5d	/* Dram ERRor DeSTination (8b)
					 * 0h:    Processor Memory Reads
					 * 1h:7h  reserved
					 * More - See Page 65 of Intel DocSheet.
					 */

#define I82975X_ERRSTS		0xc8	/* Error Status Register (16b)
					 *
					 * 15:12 reserved
					 * 11    Thermal Sensor Event
					 * 10    reserved
					 *  9    non-DRAM lock error (ndlock)
					 *  8    Refresh Timeout
					 *  7:2  reserved
					 *  1    ECC UE (multibit DRAM error)
					 *  0    ECC CE (singlebit DRAM error)
					 */

/* Error Reporting is supported by 3 mechanisms:
  1. DMI SERR generation  ( ERRCMD )
  2. SMI DMI  generation  ( SMICMD )
  3. SCI DMI  generation  ( SCICMD )
NOTE: Only ONE of the three must be enabled
*/
#define I82975X_ERRCMD		0xca	/* Error Command (16b)
					 *
					 * 15:12 reserved
					 * 11    Thermal Sensor Event
					 * 10    reserved
					 *  9    non-DRAM lock error (ndlock)
					 *  8    Refresh Timeout
					 *  7:2  reserved
					 *  1    ECC UE (multibit DRAM error)
					 *  0    ECC CE (singlebit DRAM error)
					 */

#define I82975X_SMICMD		0xcc	/* Error Command (16b)
					 *
					 * 15:2  reserved
					 *  1    ECC UE (multibit DRAM error)
					 *  0    ECC CE (singlebit DRAM error)
					 */

#define I82975X_SCICMD		0xce	/* Error Command (16b)
					 *
					 * 15:2  reserved
					 *  1    ECC UE (multibit DRAM error)
					 *  0    ECC CE (singlebit DRAM error)
					 */

#define I82975X_XEAP	0xfc	/* Extended Dram Error Address Pointer (8b)
					 *
					 * 7:1   reserved
					 * 0     Bit32 of the Dram Error Address
					 */

#define I82975X_MCHBAR		0x44	/*
					 *
					 * 31:14 Base Addr of 16K memory-mapped
					 *	configuration space
					 * 13:1  reserverd
					 *  0    mem-mapped config space enable
					 */

/* NOTE: Following addresses have to indexed using MCHBAR offset (44h, 32b) */
/* Intel 82975x memory mapped register space */

#define I82975X_DRB_SHIFT 25	/* fixed 32MiB grain */

#define I82975X_DRB		0x100	/* DRAM Row Boundary (8b x 8)
					 *
					 * 7   set to 1 in highest DRB of
					 *	channel if 4GB in ch.
					 * 6:2 upper boundary of rank in
					 *	32MB grains
					 * 1:0 set to 0
					 */
#define I82975X_DRB_CH0R0		0x100
#define I82975X_DRB_CH0R1		0x101
#define I82975X_DRB_CH0R2		0x102
#define I82975X_DRB_CH0R3		0x103
#define I82975X_DRB_CH1R0		0x180
#define I82975X_DRB_CH1R1		0x181
#define I82975X_DRB_CH1R2		0x182
#define I82975X_DRB_CH1R3		0x183


#define I82975X_DRA		0x108	/* DRAM Row Attribute (4b x 8)
					 *  defines the PAGE SIZE to be used
					 *	for the rank
					 *  7    reserved
					 *  6:4  row attr of odd rank, i.e. 1
					 *  3    reserved
					 *  2:0  row attr of even rank, i.e. 0
					 *
					 * 000 = unpopulated
					 * 001 = reserved
					 * 010 = 4KiB
					 * 011 = 8KiB
					 * 100 = 16KiB
					 * others = reserved
					 */
#define I82975X_DRA_CH0R01		0x108
#define I82975X_DRA_CH0R23		0x109
#define I82975X_DRA_CH1R01		0x188
#define I82975X_DRA_CH1R23		0x189


#define I82975X_BNKARC	0x10e /* Type of device in each rank - Bank Arch (16b)
					 *
					 * 15:8  reserved
					 * 7:6  Rank 3 architecture
					 * 5:4  Rank 2 architecture
					 * 3:2  Rank 1 architecture
					 * 1:0  Rank 0 architecture
					 *
					 * 00 => 4 banks
					 * 01 => 8 banks
					 */
#define I82975X_C0BNKARC	0x10e
#define I82975X_C1BNKARC	0x18e


#define I82975X_DRC		0x120 /* DRAM Controller Mode0 (32b)
					 *
					 * 31:30 reserved
					 * 29    init complete
					 * 28:11 reserved, according to Intel
					 *    22:21 number of channels
					 *		00=1 01=2 in 82875
					 *		seems to be ECC mode
					 *		bits in 82975 in Asus
					 *		P5W
					 *	 19:18 Data Integ Mode
					 *		00=none 01=ECC in 82875
					 * 10:8  refresh mode
					 *  7    reserved
					 *  6:4  mode select
					 *  3:2  reserved
					 *  1:0  DRAM type 10=Second Revision
					 *		DDR2 SDRAM
					 *         00, 01, 11 reserved
					 */
#define I82975X_DRC_CH0M0		0x120
#define I82975X_DRC_CH1M0		0x1A0


#define I82975X_DRC_M1	0x124 /* DRAM Controller Mode1 (32b)
					 * 31	0=Standard Address Map
					 *	1=Enhanced Address Map
					 * 30:0	reserved
					 */

#define I82975X_DRC_CH0M1		0x124
#define I82975X_DRC_CH1M1		0x1A4

enum i82975x_chips {
	I82975X = 0,
};

struct i82975x_pvt {
	void __iomem *mch_window;
};

struct i82975x_dev_info {
	const char *ctl_name;
};

struct i82975x_error_info {
	u16 errsts;
	u32 eap;
	u8 des;
	u8 derrsyn;
	u16 errsts2;
	u8 chan;		/* the channel is bit 0 of EAP */
	u8 xeap;		/* extended eap bit */
};

static const struct i82975x_dev_info i82975x_devs[] = {
	[I82975X] = {
		.ctl_name = "i82975x"
	},
};

static struct pci_dev *mci_pdev;	/* init dev: in case that AGP code has
					 * already registered driver
					 */

static int i82975x_registered = 1;

static void i82975x_get_error_info(struct mem_ctl_info *mci,
		struct i82975x_error_info *info)
{
	struct pci_dev *pdev;

	pdev = to_pci_dev(mci->pdev);

	/*
	 * This is a mess because there is no atomic way to read all the
	 * registers at once and the registers can transition from CE being
	 * overwritten by UE.
	 */
	pci_read_config_word(pdev, I82975X_ERRSTS, &info->errsts);
	pci_read_config_dword(pdev, I82975X_EAP, &info->eap);
	pci_read_config_byte(pdev, I82975X_XEAP, &info->xeap);
	pci_read_config_byte(pdev, I82975X_DES, &info->des);
	pci_read_config_byte(pdev, I82975X_DERRSYN, &info->derrsyn);
	pci_read_config_word(pdev, I82975X_ERRSTS, &info->errsts2);

	pci_write_bits16(pdev, I82975X_ERRSTS, 0x0003, 0x0003);

	/*
	 * If the error is the same then we can for both reads then
	 * the first set of reads is valid.  If there is a change then
	 * there is a CE no info and the second set of reads is valid
	 * and should be UE info.
	 */
	if (!(info->errsts2 & 0x0003))
		return;

	if ((info->errsts ^ info->errsts2) & 0x0003) {
		pci_read_config_dword(pdev, I82975X_EAP, &info->eap);
		pci_read_config_byte(pdev, I82975X_XEAP, &info->xeap);
		pci_read_config_byte(pdev, I82975X_DES, &info->des);
		pci_read_config_byte(pdev, I82975X_DERRSYN,
				&info->derrsyn);
	}
}

static int i82975x_process_error_info(struct mem_ctl_info *mci,
		struct i82975x_error_info *info, int handle_errors)
{
	int row, chan;
	unsigned long offst, page;

	if (!(info->errsts2 & 0x0003))
		return 0;

	if (!handle_errors)
		return 1;

	if ((info->errsts ^ info->errsts2) & 0x0003) {
		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0,
				     -1, -1, -1, "UE overwrote CE", "");
		info->errsts = info->errsts2;
	}

	page = (unsigned long) info->eap;
	page >>= 1;
	if (info->xeap & 1)
		page |= 0x80000000;
	page >>= (PAGE_SHIFT - 1);
	row = edac_mc_find_csrow_by_page(mci, page);

	if (row == -1)	{
		i82975x_mc_printk(mci, KERN_ERR, "error processing EAP:\n"
			"\tXEAP=%u\n"
			"\t EAP=0x%08x\n"
			"\tPAGE=0x%08x\n",
			(info->xeap & 1) ? 1 : 0, info->eap, (unsigned int) page);
		return 0;
	}
	chan = (mci->csrows[row]->nr_channels == 1) ? 0 : info->eap & 1;
	offst = info->eap
			& ((1 << PAGE_SHIFT) -
			   (1 << mci->csrows[row]->channels[chan]->dimm->grain));

	if (info->errsts & 0x0002)
		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
				     page, offst, 0,
				     row, -1, -1,
				     "i82975x UE", "");
	else
		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
				     page, offst, info->derrsyn,
				     row, chan ? chan : 0, -1,
				     "i82975x CE", "");

	return 1;
}

static void i82975x_check(struct mem_ctl_info *mci)
{
	struct i82975x_error_info info;

	edac_dbg(1, "MC%d\n", mci->mc_idx);
	i82975x_get_error_info(mci, &info);
	i82975x_process_error_info(mci, &info, 1);
}

/* Return 1 if dual channel mode is active.  Else return 0. */
static int dual_channel_active(void __iomem *mch_window)
{
	/*
	 * We treat interleaved-symmetric configuration as dual-channel - EAP's
	 * bit-0 giving the channel of the error location.
	 *
	 * All other configurations are treated as single channel - the EAP's
	 * bit-0 will resolve ok in symmetric area of mixed
	 * (symmetric/asymmetric) configurations
	 */
	u8	drb[4][2];
	int	row;
	int    dualch;

	for (dualch = 1, row = 0; dualch && (row < 4); row++) {
		drb[row][0] = readb(mch_window + I82975X_DRB + row);
		drb[row][1] = readb(mch_window + I82975X_DRB + row + 0x80);
		dualch = dualch && (drb[row][0] == drb[row][1]);
	}
	return dualch;
}

static enum dev_type i82975x_dram_type(void __iomem *mch_window, int rank)
{
	/*
	 * ECC is possible on i92975x ONLY with DEV_X8
	 */
	return DEV_X8;
}

static void i82975x_init_csrows(struct mem_ctl_info *mci,
		struct pci_dev *pdev, void __iomem *mch_window)
{
	struct csrow_info *csrow;
	unsigned long last_cumul_size;
	u8 value;
	u32 cumul_size, nr_pages;
	int index, chan;
	struct dimm_info *dimm;
	enum dev_type dtype;

	last_cumul_size = 0;

	/*
	 * 82875 comment:
	 * The dram row boundary (DRB) reg values are boundary address
	 * for each DRAM row with a granularity of 32 or 64MB (single/dual
	 * channel operation).  DRB regs are cumulative; therefore DRB7 will
	 * contain the total memory contained in all rows.
	 *
	 */

	for (index = 0; index < mci->nr_csrows; index++) {
		csrow = mci->csrows[index];

		value = readb(mch_window + I82975X_DRB + index +
					((index >= 4) ? 0x80 : 0));
		cumul_size = value;
		cumul_size <<= (I82975X_DRB_SHIFT - PAGE_SHIFT);
		/*
		 * Adjust cumul_size w.r.t number of channels
		 *
		 */
		if (csrow->nr_channels > 1)
			cumul_size <<= 1;
		edac_dbg(3, "(%d) cumul_size 0x%x\n", index, cumul_size);

		nr_pages = cumul_size - last_cumul_size;
		if (!nr_pages)
			continue;

		/*
		 * Initialise dram labels
		 * index values:
		 *   [0-7] for single-channel; i.e. csrow->nr_channels = 1
		 *   [0-3] for dual-channel; i.e. csrow->nr_channels = 2
		 */
		dtype = i82975x_dram_type(mch_window, index);
		for (chan = 0; chan < csrow->nr_channels; chan++) {
			dimm = mci->csrows[index]->channels[chan]->dimm;

			dimm->nr_pages = nr_pages / csrow->nr_channels;

			snprintf(csrow->channels[chan]->dimm->label, EDAC_MC_LABEL_LEN, "DIMM %c%d",
				 (chan == 0) ? 'A' : 'B',
				 index);
			dimm->grain = 1 << 7;	/* 128Byte cache-line resolution */
			dimm->dtype = i82975x_dram_type(mch_window, index);
			dimm->mtype = MEM_DDR2; /* I82975x supports only DDR2 */
			dimm->edac_mode = EDAC_SECDED; /* only supported */
		}

		csrow->first_page = last_cumul_size;
		csrow->last_page = cumul_size - 1;
		last_cumul_size = cumul_size;
	}
}

/* #define  i82975x_DEBUG_IOMEM */

#ifdef i82975x_DEBUG_IOMEM
static void i82975x_print_dram_timings(void __iomem *mch_window)
{
	/*
	 * The register meanings are from Intel specs;
	 * (shows 13-5-5-5 for 800-DDR2)
	 * Asus P5W Bios reports 15-5-4-4
	 * What's your religion?
	 */
	static const int caslats[4] = { 5, 4, 3, 6 };
	u32	dtreg[2];

	dtreg[0] = readl(mch_window + 0x114);
	dtreg[1] = readl(mch_window + 0x194);
	i82975x_printk(KERN_INFO, "DRAM Timings :     Ch0    Ch1\n"
		"                RAS Active Min = %d     %d\n"
		"                CAS latency    =  %d      %d\n"
		"                RAS to CAS     =  %d      %d\n"
		"                RAS precharge  =  %d      %d\n",
		(dtreg[0] >> 19 ) & 0x0f,
			(dtreg[1] >> 19) & 0x0f,
		caslats[(dtreg[0] >> 8) & 0x03],
			caslats[(dtreg[1] >> 8) & 0x03],
		((dtreg[0] >> 4) & 0x07) + 2,
			((dtreg[1] >> 4) & 0x07) + 2,
		(dtreg[0] & 0x07) + 2,
			(dtreg[1] & 0x07) + 2
	);

}
#endif

static int i82975x_probe1(struct pci_dev *pdev, int dev_idx)
{
	int rc = -ENODEV;
	struct mem_ctl_info *mci;
	struct edac_mc_layer layers[2];
	struct i82975x_pvt *pvt;
	void __iomem *mch_window;
	u32 mchbar;
	u32 drc[2];
	struct i82975x_error_info discard;
	int	chans;
#ifdef i82975x_DEBUG_IOMEM
	u8 c0drb[4];
	u8 c1drb[4];
#endif

	edac_dbg(0, "\n");

	pci_read_config_dword(pdev, I82975X_MCHBAR, &mchbar);
	if (!(mchbar & 1)) {
		edac_dbg(3, "failed, MCHBAR disabled!\n");
		goto fail0;
	}
	mchbar &= 0xffffc000;	/* bits 31:14 used for 16K window */
	mch_window = ioremap_nocache(mchbar, 0x1000);

#ifdef i82975x_DEBUG_IOMEM
	i82975x_printk(KERN_INFO, "MCHBAR real = %0x, remapped = %p\n",
					mchbar, mch_window);

	c0drb[0] = readb(mch_window + I82975X_DRB_CH0R0);
	c0drb[1] = readb(mch_window + I82975X_DRB_CH0R1);
	c0drb[2] = readb(mch_window + I82975X_DRB_CH0R2);
	c0drb[3] = readb(mch_window + I82975X_DRB_CH0R3);
	c1drb[0] = readb(mch_window + I82975X_DRB_CH1R0);
	c1drb[1] = readb(mch_window + I82975X_DRB_CH1R1);
	c1drb[2] = readb(mch_window + I82975X_DRB_CH1R2);
	c1drb[3] = readb(mch_window + I82975X_DRB_CH1R3);
	i82975x_printk(KERN_INFO, "DRBCH0R0 = 0x%02x\n", c0drb[0]);
	i82975x_printk(KERN_INFO, "DRBCH0R1 = 0x%02x\n", c0drb[1]);
	i82975x_printk(KERN_INFO, "DRBCH0R2 = 0x%02x\n", c0drb[2]);
	i82975x_printk(KERN_INFO, "DRBCH0R3 = 0x%02x\n", c0drb[3]);
	i82975x_printk(KERN_INFO, "DRBCH1R0 = 0x%02x\n", c1drb[0]);
	i82975x_printk(KERN_INFO, "DRBCH1R1 = 0x%02x\n", c1drb[1]);
	i82975x_printk(KERN_INFO, "DRBCH1R2 = 0x%02x\n", c1drb[2]);
	i82975x_printk(KERN_INFO, "DRBCH1R3 = 0x%02x\n", c1drb[3]);
#endif

	drc[0] = readl(mch_window + I82975X_DRC_CH0M0);
	drc[1] = readl(mch_window + I82975X_DRC_CH1M0);
#ifdef i82975x_DEBUG_IOMEM
	i82975x_printk(KERN_INFO, "DRC_CH0 = %0x, %s\n", drc[0],
			((drc[0] >> 21) & 3) == 1 ?
				"ECC enabled" : "ECC disabled");
	i82975x_printk(KERN_INFO, "DRC_CH1 = %0x, %s\n", drc[1],
			((drc[1] >> 21) & 3) == 1 ?
				"ECC enabled" : "ECC disabled");

	i82975x_printk(KERN_INFO, "C0 BNKARC = %0x\n",
		readw(mch_window + I82975X_C0BNKARC));
	i82975x_printk(KERN_INFO, "C1 BNKARC = %0x\n",
		readw(mch_window + I82975X_C1BNKARC));
	i82975x_print_dram_timings(mch_window);
	goto fail1;
#endif
	if (!(((drc[0] >> 21) & 3) == 1 || ((drc[1] >> 21) & 3) == 1)) {
		i82975x_printk(KERN_INFO, "ECC disabled on both channels.\n");
		goto fail1;
	}

	chans = dual_channel_active(mch_window) + 1;

	/* assuming only one controller, index thus is 0 */
	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
	layers[0].size = I82975X_NR_DIMMS;
	layers[0].is_virt_csrow = true;
	layers[1].type = EDAC_MC_LAYER_CHANNEL;
	layers[1].size = I82975X_NR_CSROWS(chans);
	layers[1].is_virt_csrow = false;
	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt));
	if (!mci) {
		rc = -ENOMEM;
		goto fail1;
	}

	edac_dbg(3, "init mci\n");
	mci->pdev = &pdev->dev;
	mci->mtype_cap = MEM_FLAG_DDR2;
	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
	mci->edac_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
	mci->mod_name = EDAC_MOD_STR;
	mci->mod_ver = I82975X_REVISION;
	mci->ctl_name = i82975x_devs[dev_idx].ctl_name;
	mci->dev_name = pci_name(pdev);
	mci->edac_check = i82975x_check;
	mci->ctl_page_to_phys = NULL;
	edac_dbg(3, "init pvt\n");
	pvt = (struct i82975x_pvt *) mci->pvt_info;
	pvt->mch_window = mch_window;
	i82975x_init_csrows(mci, pdev, mch_window);
	mci->scrub_mode = SCRUB_HW_SRC;
	i82975x_get_error_info(mci, &discard);  /* clear counters */

	/* finalize this instance of memory controller with edac core */
	if (edac_mc_add_mc(mci)) {
		edac_dbg(3, "failed edac_mc_add_mc()\n");
		goto fail2;
	}

	/* get this far and it's successful */
	edac_dbg(3, "success\n");
	return 0;

fail2:
	edac_mc_free(mci);

fail1:
	iounmap(mch_window);
fail0:
	return rc;
}

/* returns count (>= 0), or negative on error */
static int i82975x_init_one(struct pci_dev *pdev,
			    const struct pci_device_id *ent)
{
	int rc;

	edac_dbg(0, "\n");

	if (pci_enable_device(pdev) < 0)
		return -EIO;

	rc = i82975x_probe1(pdev, ent->driver_data);

	if (mci_pdev == NULL)
		mci_pdev = pci_dev_get(pdev);

	return rc;
}

static void i82975x_remove_one(struct pci_dev *pdev)
{
	struct mem_ctl_info *mci;
	struct i82975x_pvt *pvt;

	edac_dbg(0, "\n");

	mci = edac_mc_del_mc(&pdev->dev);
	if (mci  == NULL)
		return;

	pvt = mci->pvt_info;
	if (pvt->mch_window)
		iounmap( pvt->mch_window );

	edac_mc_free(mci);
}

static const struct pci_device_id i82975x_pci_tbl[] = {
	{
		PCI_VEND_DEV(INTEL, 82975_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
		I82975X
	},
	{
		0,
	}	/* 0 terminated list. */
};

MODULE_DEVICE_TABLE(pci, i82975x_pci_tbl);

static struct pci_driver i82975x_driver = {
	.name = EDAC_MOD_STR,
	.probe = i82975x_init_one,
	.remove = i82975x_remove_one,
	.id_table = i82975x_pci_tbl,
};

static int __init i82975x_init(void)
{
	int pci_rc;

	edac_dbg(3, "\n");

       /* Ensure that the OPSTATE is set correctly for POLL or NMI */
       opstate_init();

	pci_rc = pci_register_driver(&i82975x_driver);
	if (pci_rc < 0)
		goto fail0;

	if (mci_pdev == NULL) {
		mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
				PCI_DEVICE_ID_INTEL_82975_0, NULL);

		if (!mci_pdev) {
			edac_dbg(0, "i82975x pci_get_device fail\n");
			pci_rc = -ENODEV;
			goto fail1;
		}

		pci_rc = i82975x_init_one(mci_pdev, i82975x_pci_tbl);

		if (pci_rc < 0) {
			edac_dbg(0, "i82975x init fail\n");
			pci_rc = -ENODEV;
			goto fail1;
		}
	}

	return 0;

fail1:
	pci_unregister_driver(&i82975x_driver);

fail0:
	pci_dev_put(mci_pdev);
	return pci_rc;
}

static void __exit i82975x_exit(void)
{
	edac_dbg(3, "\n");

	pci_unregister_driver(&i82975x_driver);

	if (!i82975x_registered) {
		i82975x_remove_one(mci_pdev);
		pci_dev_put(mci_pdev);
	}
}

module_init(i82975x_init);
module_exit(i82975x_exit);

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Arvind R. <arvino55@gmail.com>");
MODULE_DESCRIPTION("MC support for Intel 82975 memory hub controllers");

module_param(edac_op_state, int, 0444);
MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
Commit	Line	Data
420390f0 RD	1	/*
	2	* Intel 82975X Memory Controller kernel module
	3	* (C) 2007 aCarLab (India) Pvt. Ltd. (http://acarlab.com)
	4	* (C) 2007 jetzbroadband (http://jetzbroadband.com)
	5	* This file may be distributed under the terms of the
	6	* GNU General Public License.
	7	*
	8	* Written by Arvind R.
	9	* Copied from i82875p_edac.c source:
	10	*/
	11
	12	#include <linux/module.h>
	13	#include <linux/init.h>
	14	#include <linux/pci.h>
	15	#include <linux/pci_ids.h>
c3c52bce	16	#include <linux/edac.h>
78d88e8a	17	#include "edac_module.h"
420390f0	18
152ba394	19	#define I82975X_REVISION " Ver: 1.0.0"
420390f0 RD	20	#define EDAC_MOD_STR "i82975x_edac"
	21
	22	#define i82975x_printk(level, fmt, arg...) \
	23	edac_printk(level, "i82975x", fmt, ##arg)
	24
	25	#define i82975x_mc_printk(mci, level, fmt, arg...) \
	26	edac_mc_chipset_printk(mci, level, "i82975x", fmt, ##arg)
	27
	28	#ifndef PCI_DEVICE_ID_INTEL_82975_0
	29	#define PCI_DEVICE_ID_INTEL_82975_0 0x277c
	30	#endif /* PCI_DEVICE_ID_INTEL_82975_0 */
	31
70521358 MCC	32	#define I82975X_NR_DIMMS 8
70521358 MCC	33	#define I82975X_NR_CSROWS(nr_chans) (I82975X_NR_DIMMS / (nr_chans))
420390f0 RD	34
	35	/* Intel 82975X register addresses - device 0 function 0 - DRAM Controller */
	36	#define I82975X_EAP 0x58 /* Dram Error Address Pointer (32b)
	37	*
	38	* 31:7 128 byte cache-line address
	39	* 6:1 reserved
	40	* 0 0: CH0; 1: CH1
	41	*/
	42
	43	#define I82975X_DERRSYN 0x5c /* Dram Error SYNdrome (8b)
	44	*
	45	* 7:0 DRAM ECC Syndrome
	46	*/
	47
	48	#define I82975X_DES 0x5d /* Dram ERRor DeSTination (8b)
	49	* 0h: Processor Memory Reads
	50	* 1h:7h reserved
	51	* More - See Page 65 of Intel DocSheet.
	52	*/
	53
	54	#define I82975X_ERRSTS 0xc8 /* Error Status Register (16b)
	55	*
	56	* 15:12 reserved
	57	* 11 Thermal Sensor Event
	58	* 10 reserved
	59	* 9 non-DRAM lock error (ndlock)
	60	* 8 Refresh Timeout
	61	* 7:2 reserved
	62	* 1 ECC UE (multibit DRAM error)
	63	* 0 ECC CE (singlebit DRAM error)
	64	*/
	65
	66	/* Error Reporting is supported by 3 mechanisms:
	67	1. DMI SERR generation ( ERRCMD )
	68	2. SMI DMI generation ( SMICMD )
	69	3. SCI DMI generation ( SCICMD )
	70	NOTE: Only ONE of the three must be enabled
	71	*/
	72	#define I82975X_ERRCMD 0xca /* Error Command (16b)
	73	*
	74	* 15:12 reserved
	75	* 11 Thermal Sensor Event
	76	* 10 reserved
	77	* 9 non-DRAM lock error (ndlock)
	78	* 8 Refresh Timeout
	79	* 7:2 reserved
	80	* 1 ECC UE (multibit DRAM error)
	81	* 0 ECC CE (singlebit DRAM error)
	82	*/
	83
	84	#define I82975X_SMICMD 0xcc /* Error Command (16b)
	85	*
	86	* 15:2 reserved
	87	* 1 ECC UE (multibit DRAM error)
	88	* 0 ECC CE (singlebit DRAM error)
	89	*/
	90
	91	#define I82975X_SCICMD 0xce /* Error Command (16b)
	92	*
	93	* 15:2 reserved
	94	* 1 ECC UE (multibit DRAM error)
	95	* 0 ECC CE (singlebit DRAM error)
	96	*/
	97
98	#define I82975X_XEAP 0xfc /* Extended Dram Error Address Pointer (8b)
99	*
100	* 7:1 reserved
101	* 0 Bit32 of the Dram Error Address
102	*/
103
104	#define I82975X_MCHBAR 0x44 /*
105	*
106	* 31:14 Base Addr of 16K memory-mapped
107	* configuration space
108	* 13:1 reserverd
109	* 0 mem-mapped config space enable
110	*/
111
112	/* NOTE: Following addresses have to indexed using MCHBAR offset (44h, 32b) */
113	/* Intel 82975x memory mapped register space */
114
115	#define I82975X_DRB_SHIFT 25 /* fixed 32MiB grain */
116
117	#define I82975X_DRB 0x100 /* DRAM Row Boundary (8b x 8)
118	*
119	* 7 set to 1 in highest DRB of
120	* channel if 4GB in ch.
121	* 6:2 upper boundary of rank in
122	* 32MB grains
123	* 1:0 set to 0
124	*/
125	#define I82975X_DRB_CH0R0 0x100
126	#define I82975X_DRB_CH0R1 0x101
127	#define I82975X_DRB_CH0R2 0x102
128	#define I82975X_DRB_CH0R3 0x103
129	#define I82975X_DRB_CH1R0 0x180
130	#define I82975X_DRB_CH1R1 0x181
131	#define I82975X_DRB_CH1R2 0x182
132	#define I82975X_DRB_CH1R3 0x183
133
134
135	#define I82975X_DRA 0x108 /* DRAM Row Attribute (4b x 8)
136	* defines the PAGE SIZE to be used
137	* for the rank
138	* 7 reserved
139	* 6:4 row attr of odd rank, i.e. 1
140	* 3 reserved
141	* 2:0 row attr of even rank, i.e. 0
142	*
143	* 000 = unpopulated
144	* 001 = reserved
145	* 010 = 4KiB
146	* 011 = 8KiB
147	* 100 = 16KiB
148	* others = reserved
149	*/
150	#define I82975X_DRA_CH0R01 0x108
151	#define I82975X_DRA_CH0R23 0x109
152	#define I82975X_DRA_CH1R01 0x188
153	#define I82975X_DRA_CH1R23 0x189
154
155
156	#define I82975X_BNKARC 0x10e /* Type of device in each rank - Bank Arch (16b)
157	*
158	* 15:8 reserved
159	* 7:6 Rank 3 architecture
160	* 5:4 Rank 2 architecture
161	* 3:2 Rank 1 architecture
162	* 1:0 Rank 0 architecture
163	*
7ba99575 A	164	* 00 => 4 banks
7ba99575 A	165	* 01 => 8 banks
420390f0 RD	166	*/
	167	#define I82975X_C0BNKARC 0x10e
	168	#define I82975X_C1BNKARC 0x18e
	169
	170
	171
	172	#define I82975X_DRC 0x120 /* DRAM Controller Mode0 (32b)
	173	*
	174	* 31:30 reserved
	175	* 29 init complete
	176	* 28:11 reserved, according to Intel
	177	* 22:21 number of channels
	178	* 00=1 01=2 in 82875
	179	* seems to be ECC mode
	180	* bits in 82975 in Asus
	181	* P5W
	182	* 19:18 Data Integ Mode
	183	* 00=none 01=ECC in 82875
	184	* 10:8 refresh mode
	185	* 7 reserved
	186	* 6:4 mode select
	187	* 3:2 reserved
	188	* 1:0 DRAM type 10=Second Revision
	189	* DDR2 SDRAM
	190	* 00, 01, 11 reserved
	191	*/
	192	#define I82975X_DRC_CH0M0 0x120
	193	#define I82975X_DRC_CH1M0 0x1A0
	194
	195
	196	#define I82975X_DRC_M1 0x124 /* DRAM Controller Mode1 (32b)
	197	* 31 0=Standard Address Map
	198	* 1=Enhanced Address Map
	199	* 30:0 reserved
	200	*/
	201
	202	#define I82975X_DRC_CH0M1 0x124
	203	#define I82975X_DRC_CH1M1 0x1A4
	204
	205	enum i82975x_chips {
	206	I82975X = 0,
	207	};
	208
	209	struct i82975x_pvt {
	210	void __iomem *mch_window;
	211	};
	212
	213	struct i82975x_dev_info {
	214	const char *ctl_name;
	215	};
	216
	217	struct i82975x_error_info {
	218	u16 errsts;
	219	u32 eap;
	220	u8 des;
	221	u8 derrsyn;
	222	u16 errsts2;
	223	u8 chan; /* the channel is bit 0 of EAP */
	224	u8 xeap; /* extended eap bit */
	225	};
	226
	227	static const struct i82975x_dev_info i82975x_devs[] = {
	228	[I82975X] = {
	229	.ctl_name = "i82975x"
230	},
231	};
232
233	static struct pci_dev mci_pdev; / init dev: in case that AGP code has
234	* already registered driver
235	*/
236
237	static int i82975x_registered = 1;
238
239	static void i82975x_get_error_info(struct mem_ctl_info *mci,
240	struct i82975x_error_info *info)
241	{
242	struct pci_dev *pdev;
243
fd687502	244	pdev = to_pci_dev(mci->pdev);
420390f0 RD	245
	246	/*
	247	* This is a mess because there is no atomic way to read all the
	248	* registers at once and the registers can transition from CE being
	249	* overwritten by UE.
	250	*/
	251	pci_read_config_word(pdev, I82975X_ERRSTS, &info->errsts);
	252	pci_read_config_dword(pdev, I82975X_EAP, &info->eap);
	253	pci_read_config_byte(pdev, I82975X_XEAP, &info->xeap);
	254	pci_read_config_byte(pdev, I82975X_DES, &info->des);
	255	pci_read_config_byte(pdev, I82975X_DERRSYN, &info->derrsyn);
	256	pci_read_config_word(pdev, I82975X_ERRSTS, &info->errsts2);
	257
	258	pci_write_bits16(pdev, I82975X_ERRSTS, 0x0003, 0x0003);
	259
	260	/*
	261	* If the error is the same then we can for both reads then
	262	* the first set of reads is valid. If there is a change then
	263	* there is a CE no info and the second set of reads is valid
	264	* and should be UE info.
	265	*/
	266	if (!(info->errsts2 & 0x0003))
	267	return;
	268
	269	if ((info->errsts ^ info->errsts2) & 0x0003) {
	270	pci_read_config_dword(pdev, I82975X_EAP, &info->eap);
	271	pci_read_config_byte(pdev, I82975X_XEAP, &info->xeap);
	272	pci_read_config_byte(pdev, I82975X_DES, &info->des);
	273	pci_read_config_byte(pdev, I82975X_DERRSYN,
	274	&info->derrsyn);
	275	}
	276	}
	277
	278	static int i82975x_process_error_info(struct mem_ctl_info *mci,
	279	struct i82975x_error_info *info, int handle_errors)
	280	{
6099e419	281	int row, chan;
cb60a422	282	unsigned long offst, page;
420390f0	283
420390f0 RD	284	if (!(info->errsts2 & 0x0003))
	285	return 0;
	286
	287	if (!handle_errors)
	288	return 1;
	289
	290	if ((info->errsts ^ info->errsts2) & 0x0003) {
9eb07a7f	291	edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0,
03f7eae8	292	-1, -1, -1, "UE overwrote CE", "");
420390f0 RD	293	info->errsts = info->errsts2;
	294	}
	295
cb60a422	296	page = (unsigned long) info->eap;
cb60a422	297	page >>= 1;
6099e419 A	298	if (info->xeap & 1)
	299	page \|= 0x80000000;
	300	page >>= (PAGE_SHIFT - 1);
cb60a422	301	row = edac_mc_find_csrow_by_page(mci, page);
420390f0	302
6099e419 A	303	if (row == -1) {
	304	i82975x_mc_printk(mci, KERN_ERR, "error processing EAP:\n"
	305	"\tXEAP=%u\n"
	306	"\t EAP=0x%08x\n"
	307	"\tPAGE=0x%08x\n",
	308	(info->xeap & 1) ? 1 : 0, info->eap, (unsigned int) page);
	309	return 0;
	310	}
de3910eb	311	chan = (mci->csrows[row]->nr_channels == 1) ? 0 : info->eap & 1;
6099e419 A	312	offst = info->eap
6099e419 A	313	& ((1 << PAGE_SHIFT) -
de3910eb	314	(1 << mci->csrows[row]->channels[chan]->dimm->grain));
6099e419	315
420390f0	316	if (info->errsts & 0x0002)
9eb07a7f	317	edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
70521358 MCC	318	page, offst, 0,
70521358 MCC	319	row, -1, -1,
03f7eae8	320	"i82975x UE", "");
420390f0	321	else
9eb07a7f	322	edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
70521358 MCC	323	page, offst, info->derrsyn,
70521358 MCC	324	row, chan ? chan : 0, -1,
03f7eae8	325	"i82975x CE", "");
420390f0 RD	326
	327	return 1;
	328	}
	329
	330	static void i82975x_check(struct mem_ctl_info *mci)
	331	{
	332	struct i82975x_error_info info;
	333
956b9ba1	334	edac_dbg(1, "MC%d\n", mci->mc_idx);
420390f0 RD	335	i82975x_get_error_info(mci, &info);
	336	i82975x_process_error_info(mci, &info, 1);
	337	}
	338
	339	/* Return 1 if dual channel mode is active. Else return 0. */
	340	static int dual_channel_active(void __iomem *mch_window)
	341	{
	342	/*
	343	* We treat interleaved-symmetric configuration as dual-channel - EAP's
	344	* bit-0 giving the channel of the error location.
	345	*
	346	* All other configurations are treated as single channel - the EAP's
	347	* bit-0 will resolve ok in symmetric area of mixed
	348	* (symmetric/asymmetric) configurations
	349	*/
	350	u8 drb[4][2];
	351	int row;
	352	int dualch;
	353
	354	for (dualch = 1, row = 0; dualch && (row < 4); row++) {
	355	drb[row][0] = readb(mch_window + I82975X_DRB + row);
	356	drb[row][1] = readb(mch_window + I82975X_DRB + row + 0x80);
	357	dualch = dualch && (drb[row][0] == drb[row][1]);
	358	}
	359	return dualch;
	360	}
	361
	362	static enum dev_type i82975x_dram_type(void __iomem *mch_window, int rank)
	363	{
	364	/*
7ba99575	365	* ECC is possible on i92975x ONLY with DEV_X8
420390f0 RD	366	*/
	367	return DEV_X8;
	368	}
	369
	370	static void i82975x_init_csrows(struct mem_ctl_info *mci,
	371	struct pci_dev pdev, void __iomem mch_window)
	372	{
	373	struct csrow_info *csrow;
	374	unsigned long last_cumul_size;
	375	u8 value;
a895bf8b	376	u32 cumul_size, nr_pages;
cb60a422	377	int index, chan;
084a4fcc MCC	378	struct dimm_info *dimm;
084a4fcc MCC	379	enum dev_type dtype;
420390f0 RD	380
	381	last_cumul_size = 0;
	382
	383	/*
	384	* 82875 comment:
	385	* The dram row boundary (DRB) reg values are boundary address
	386	* for each DRAM row with a granularity of 32 or 64MB (single/dual
	387	* channel operation). DRB regs are cumulative; therefore DRB7 will
cb60a422	388	* contain the total memory contained in all rows.
420390f0 RD	389	*
	390	*/
	391
	392	for (index = 0; index < mci->nr_csrows; index++) {
de3910eb	393	csrow = mci->csrows[index];
420390f0 RD	394
	395	value = readb(mch_window + I82975X_DRB + index +
	396	((index >= 4) ? 0x80 : 0));
	397	cumul_size = value;
	398	cumul_size <<= (I82975X_DRB_SHIFT - PAGE_SHIFT);
cb60a422 A	399	/*
	400	* Adjust cumul_size w.r.t number of channels
	401	*
	402	*/
	403	if (csrow->nr_channels > 1)
	404	cumul_size <<= 1;
956b9ba1	405	edac_dbg(3, "(%d) cumul_size 0x%x\n", index, cumul_size);
cb60a422	406
a895bf8b	407	nr_pages = cumul_size - last_cumul_size;
36683aab MCC	408	if (!nr_pages)
	409	continue;
	410
cb60a422 A	411	/*
	412	* Initialise dram labels
	413	* index values:
	414	* [0-7] for single-channel; i.e. csrow->nr_channels = 1
	415	* [0-3] for dual-channel; i.e. csrow->nr_channels = 2
	416	*/
084a4fcc MCC	417	dtype = i82975x_dram_type(mch_window, index);
084a4fcc MCC	418	for (chan = 0; chan < csrow->nr_channels; chan++) {
de3910eb	419	dimm = mci->csrows[index]->channels[chan]->dimm;
a895bf8b	420
a895bf8b	421	dimm->nr_pages = nr_pages / csrow->nr_channels;
47969684 MCC	422
	423	snprintf(csrow->channels[chan]->dimm->label, EDAC_MC_LABEL_LEN, "DIMM %c%d",
	424	(chan == 0) ? 'A' : 'B',
	425	index);
084a4fcc MCC	426	dimm->grain = 1 << 7; /* 128Byte cache-line resolution */
	427	dimm->dtype = i82975x_dram_type(mch_window, index);
	428	dimm->mtype = MEM_DDR2; /* I82975x supports only DDR2 */
	429	dimm->edac_mode = EDAC_SECDED; /* only supported */
	430	}
cb60a422	431
420390f0 RD	432	csrow->first_page = last_cumul_size;
420390f0 RD	433	csrow->last_page = cumul_size - 1;
420390f0	434	last_cumul_size = cumul_size;
420390f0 RD	435	}
	436	}
	437
	438	/* #define i82975x_DEBUG_IOMEM */
	439
	440	#ifdef i82975x_DEBUG_IOMEM
	441	static void i82975x_print_dram_timings(void __iomem *mch_window)
	442	{
	443	/*
	444	* The register meanings are from Intel specs;
	445	* (shows 13-5-5-5 for 800-DDR2)
	446	* Asus P5W Bios reports 15-5-4-4
	447	* What's your religion?
	448	*/
	449	static const int caslats[4] = { 5, 4, 3, 6 };
	450	u32 dtreg[2];
	451
	452	dtreg[0] = readl(mch_window + 0x114);
	453	dtreg[1] = readl(mch_window + 0x194);
	454	i82975x_printk(KERN_INFO, "DRAM Timings : Ch0 Ch1\n"
	455	" RAS Active Min = %d %d\n"
	456	" CAS latency = %d %d\n"
	457	" RAS to CAS = %d %d\n"
	458	" RAS precharge = %d %d\n",
	459	(dtreg[0] >> 19 ) & 0x0f,
	460	(dtreg[1] >> 19) & 0x0f,
	461	caslats[(dtreg[0] >> 8) & 0x03],
	462	caslats[(dtreg[1] >> 8) & 0x03],
	463	((dtreg[0] >> 4) & 0x07) + 2,
	464	((dtreg[1] >> 4) & 0x07) + 2,
	465	(dtreg[0] & 0x07) + 2,
	466	(dtreg[1] & 0x07) + 2
	467	);
	468
	469	}
	470	#endif
	471
	472	static int i82975x_probe1(struct pci_dev *pdev, int dev_idx)
	473	{
	474	int rc = -ENODEV;
	475	struct mem_ctl_info *mci;
70521358	476	struct edac_mc_layer layers[2];
420390f0 RD	477	struct i82975x_pvt *pvt;
	478	void __iomem *mch_window;
	479	u32 mchbar;
	480	u32 drc[2];
	481	struct i82975x_error_info discard;
	482	int chans;
	483	#ifdef i82975x_DEBUG_IOMEM
	484	u8 c0drb[4];
	485	u8 c1drb[4];
	486	#endif
	487
956b9ba1	488	edac_dbg(0, "\n");
420390f0 RD	489
	490	pci_read_config_dword(pdev, I82975X_MCHBAR, &mchbar);
	491	if (!(mchbar & 1)) {
956b9ba1	492	edac_dbg(3, "failed, MCHBAR disabled!\n");
420390f0 RD	493	goto fail0;
	494	}
	495	mchbar &= 0xffffc000; /* bits 31:14 used for 16K window */
	496	mch_window = ioremap_nocache(mchbar, 0x1000);
	497
	498	#ifdef i82975x_DEBUG_IOMEM
	499	i82975x_printk(KERN_INFO, "MCHBAR real = %0x, remapped = %p\n",
	500	mchbar, mch_window);
	501
	502	c0drb[0] = readb(mch_window + I82975X_DRB_CH0R0);
	503	c0drb[1] = readb(mch_window + I82975X_DRB_CH0R1);
	504	c0drb[2] = readb(mch_window + I82975X_DRB_CH0R2);
	505	c0drb[3] = readb(mch_window + I82975X_DRB_CH0R3);
	506	c1drb[0] = readb(mch_window + I82975X_DRB_CH1R0);
	507	c1drb[1] = readb(mch_window + I82975X_DRB_CH1R1);
	508	c1drb[2] = readb(mch_window + I82975X_DRB_CH1R2);
	509	c1drb[3] = readb(mch_window + I82975X_DRB_CH1R3);
	510	i82975x_printk(KERN_INFO, "DRBCH0R0 = 0x%02x\n", c0drb[0]);
	511	i82975x_printk(KERN_INFO, "DRBCH0R1 = 0x%02x\n", c0drb[1]);
	512	i82975x_printk(KERN_INFO, "DRBCH0R2 = 0x%02x\n", c0drb[2]);
	513	i82975x_printk(KERN_INFO, "DRBCH0R3 = 0x%02x\n", c0drb[3]);
	514	i82975x_printk(KERN_INFO, "DRBCH1R0 = 0x%02x\n", c1drb[0]);
	515	i82975x_printk(KERN_INFO, "DRBCH1R1 = 0x%02x\n", c1drb[1]);
	516	i82975x_printk(KERN_INFO, "DRBCH1R2 = 0x%02x\n", c1drb[2]);
	517	i82975x_printk(KERN_INFO, "DRBCH1R3 = 0x%02x\n", c1drb[3]);
	518	#endif
	519
	520	drc[0] = readl(mch_window + I82975X_DRC_CH0M0);
	521	drc[1] = readl(mch_window + I82975X_DRC_CH1M0);
	522	#ifdef i82975x_DEBUG_IOMEM
	523	i82975x_printk(KERN_INFO, "DRC_CH0 = %0x, %s\n", drc[0],
	524	((drc[0] >> 21) & 3) == 1 ?
	525	"ECC enabled" : "ECC disabled");
	526	i82975x_printk(KERN_INFO, "DRC_CH1 = %0x, %s\n", drc[1],
	527	((drc[1] >> 21) & 3) == 1 ?
	528	"ECC enabled" : "ECC disabled");
	529
	530	i82975x_printk(KERN_INFO, "C0 BNKARC = %0x\n",
	531	readw(mch_window + I82975X_C0BNKARC));
	532	i82975x_printk(KERN_INFO, "C1 BNKARC = %0x\n",
	533	readw(mch_window + I82975X_C1BNKARC));
	534	i82975x_print_dram_timings(mch_window);
	535	goto fail1;
	536	#endif
	537	if (!(((drc[0] >> 21) & 3) == 1 \|\| ((drc[1] >> 21) & 3) == 1)) {
	538	i82975x_printk(KERN_INFO, "ECC disabled on both channels.\n");
	539	goto fail1;
	540	}
	541
	542	chans = dual_channel_active(mch_window) + 1;
	543
	544	/* assuming only one controller, index thus is 0 */
70521358 MCC	545	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
	546	layers[0].size = I82975X_NR_DIMMS;
	547	layers[0].is_virt_csrow = true;
	548	layers[1].type = EDAC_MC_LAYER_CHANNEL;
	549	layers[1].size = I82975X_NR_CSROWS(chans);
	550	layers[1].is_virt_csrow = false;
ca0907b9	551	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt));
420390f0 RD	552	if (!mci) {
	553	rc = -ENOMEM;
	554	goto fail1;
	555	}
	556
956b9ba1	557	edac_dbg(3, "init mci\n");
fd687502	558	mci->pdev = &pdev->dev;
da95b3d2	559	mci->mtype_cap = MEM_FLAG_DDR2;
420390f0 RD	560	mci->edac_ctl_cap = EDAC_FLAG_NONE \| EDAC_FLAG_SECDED;
	561	mci->edac_cap = EDAC_FLAG_NONE \| EDAC_FLAG_SECDED;
	562	mci->mod_name = EDAC_MOD_STR;
	563	mci->mod_ver = I82975X_REVISION;
	564	mci->ctl_name = i82975x_devs[dev_idx].ctl_name;
da95b3d2	565	mci->dev_name = pci_name(pdev);
420390f0 RD	566	mci->edac_check = i82975x_check;
420390f0 RD	567	mci->ctl_page_to_phys = NULL;
956b9ba1	568	edac_dbg(3, "init pvt\n");
420390f0 RD	569	pvt = (struct i82975x_pvt *) mci->pvt_info;
	570	pvt->mch_window = mch_window;
	571	i82975x_init_csrows(mci, pdev, mch_window);
da95b3d2	572	mci->scrub_mode = SCRUB_HW_SRC;
420390f0 RD	573	i82975x_get_error_info(mci, &discard); /* clear counters */
	574
	575	/* finalize this instance of memory controller with edac core */
	576	if (edac_mc_add_mc(mci)) {
956b9ba1	577	edac_dbg(3, "failed edac_mc_add_mc()\n");
420390f0 RD	578	goto fail2;
	579	}
	580
	581	/* get this far and it's successful */
956b9ba1	582	edac_dbg(3, "success\n");
420390f0 RD	583	return 0;
	584
	585	fail2:
	586	edac_mc_free(mci);
	587
	588	fail1:
	589	iounmap(mch_window);
	590	fail0:
	591	return rc;
	592	}
	593
	594	/* returns count (>= 0), or negative on error */
9b3c6e85 GKH	595	static int i82975x_init_one(struct pci_dev *pdev,
9b3c6e85 GKH	596	const struct pci_device_id *ent)
420390f0 RD	597	{
	598	int rc;
	599
956b9ba1	600	edac_dbg(0, "\n");
420390f0 RD	601
	602	if (pci_enable_device(pdev) < 0)
	603	return -EIO;
	604
	605	rc = i82975x_probe1(pdev, ent->driver_data);
	606
	607	if (mci_pdev == NULL)
	608	mci_pdev = pci_dev_get(pdev);
	609
	610	return rc;
	611	}
	612
9b3c6e85	613	static void i82975x_remove_one(struct pci_dev *pdev)
420390f0 RD	614	{
	615	struct mem_ctl_info *mci;
	616	struct i82975x_pvt *pvt;
	617
956b9ba1	618	edac_dbg(0, "\n");
420390f0 RD	619
	620	mci = edac_mc_del_mc(&pdev->dev);
	621	if (mci == NULL)
	622	return;
	623
	624	pvt = mci->pvt_info;
	625	if (pvt->mch_window)
	626	iounmap( pvt->mch_window );
	627
	628	edac_mc_free(mci);
	629	}
	630
ba935f40	631	static const struct pci_device_id i82975x_pci_tbl[] = {
420390f0 RD	632	{
	633	PCI_VEND_DEV(INTEL, 82975_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
	634	I82975X
	635	},
	636	{
	637	0,
	638	} /* 0 terminated list. */
	639	};
	640
	641	MODULE_DEVICE_TABLE(pci, i82975x_pci_tbl);
	642
	643	static struct pci_driver i82975x_driver = {
	644	.name = EDAC_MOD_STR,
	645	.probe = i82975x_init_one,
9b3c6e85	646	.remove = i82975x_remove_one,
420390f0 RD	647	.id_table = i82975x_pci_tbl,
	648	};
	649
	650	static int __init i82975x_init(void)
	651	{
	652	int pci_rc;
	653
956b9ba1	654	edac_dbg(3, "\n");
420390f0	655
c3c52bce HM	656	/* Ensure that the OPSTATE is set correctly for POLL or NMI */
	657	opstate_init();
	658
420390f0 RD	659	pci_rc = pci_register_driver(&i82975x_driver);
	660	if (pci_rc < 0)
	661	goto fail0;
	662
	663	if (mci_pdev == NULL) {
	664	mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
	665	PCI_DEVICE_ID_INTEL_82975_0, NULL);
	666
	667	if (!mci_pdev) {
956b9ba1	668	edac_dbg(0, "i82975x pci_get_device fail\n");
420390f0 RD	669	pci_rc = -ENODEV;
	670	goto fail1;
	671	}
	672
	673	pci_rc = i82975x_init_one(mci_pdev, i82975x_pci_tbl);
	674
	675	if (pci_rc < 0) {
956b9ba1	676	edac_dbg(0, "i82975x init fail\n");
420390f0 RD	677	pci_rc = -ENODEV;
	678	goto fail1;
	679	}
	680	}
	681
	682	return 0;
	683
	684	fail1:
	685	pci_unregister_driver(&i82975x_driver);
	686
	687	fail0:
72601945	688	pci_dev_put(mci_pdev);
420390f0 RD	689	return pci_rc;
	690	}
	691
	692	static void __exit i82975x_exit(void)
	693	{
956b9ba1	694	edac_dbg(3, "\n");
420390f0 RD	695
	696	pci_unregister_driver(&i82975x_driver);
	697
	698	if (!i82975x_registered) {
	699	i82975x_remove_one(mci_pdev);
	700	pci_dev_put(mci_pdev);
	701	}
	702	}
	703
	704	module_init(i82975x_init);
	705	module_exit(i82975x_exit);
	706
	707	MODULE_LICENSE("GPL");
25527885	708	MODULE_AUTHOR("Arvind R. <arvino55@gmail.com>");
420390f0	709	MODULE_DESCRIPTION("MC support for Intel 82975 memory hub controllers");
c3c52bce HM	710
	711	module_param(edac_op_state, int, 0444);
	712	MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");