]>
Commit | Line | Data |
---|---|---|
27a28d32 JK |
1 | /* |
2 | * extcon-max77843.c - Maxim MAX77843 extcon driver to support | |
3 | * MUIC(Micro USB Interface Controller) | |
4 | * | |
5 | * Copyright (C) 2015 Samsung Electronics | |
6 | * Author: Jaewon Kim <jaewon02.kim@samsung.com> | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or modify | |
9 | * it under the terms of the GNU General Public License as published by | |
10 | * the Free Software Foundation; either version 2 of the License, or | |
11 | * (at your option) any later version. | |
12 | */ | |
13 | ||
176aa360 | 14 | #include <linux/extcon-provider.h> |
27a28d32 JK |
15 | #include <linux/i2c.h> |
16 | #include <linux/interrupt.h> | |
17 | #include <linux/kernel.h> | |
bc1aadc1 | 18 | #include <linux/mfd/max77693-common.h> |
27a28d32 JK |
19 | #include <linux/mfd/max77843-private.h> |
20 | #include <linux/module.h> | |
21 | #include <linux/platform_device.h> | |
22 | #include <linux/workqueue.h> | |
23 | ||
24 | #define DELAY_MS_DEFAULT 15000 /* unit: millisecond */ | |
25 | ||
26 | enum max77843_muic_status { | |
27 | MAX77843_MUIC_STATUS1 = 0, | |
28 | MAX77843_MUIC_STATUS2, | |
29 | MAX77843_MUIC_STATUS3, | |
30 | ||
31 | MAX77843_MUIC_STATUS_NUM, | |
32 | }; | |
33 | ||
34 | struct max77843_muic_info { | |
35 | struct device *dev; | |
bc1aadc1 | 36 | struct max77693_dev *max77843; |
27a28d32 JK |
37 | struct extcon_dev *edev; |
38 | ||
39 | struct mutex mutex; | |
40 | struct work_struct irq_work; | |
41 | struct delayed_work wq_detcable; | |
42 | ||
43 | u8 status[MAX77843_MUIC_STATUS_NUM]; | |
44 | int prev_cable_type; | |
45 | int prev_chg_type; | |
46 | int prev_gnd_type; | |
47 | ||
48 | bool irq_adc; | |
49 | bool irq_chg; | |
50 | }; | |
51 | ||
52 | enum max77843_muic_cable_group { | |
53 | MAX77843_CABLE_GROUP_ADC = 0, | |
54 | MAX77843_CABLE_GROUP_ADC_GND, | |
55 | MAX77843_CABLE_GROUP_CHG, | |
56 | }; | |
57 | ||
58 | enum max77843_muic_adc_debounce_time { | |
59 | MAX77843_DEBOUNCE_TIME_5MS = 0, | |
60 | MAX77843_DEBOUNCE_TIME_10MS, | |
61 | MAX77843_DEBOUNCE_TIME_25MS, | |
62 | MAX77843_DEBOUNCE_TIME_38_62MS, | |
63 | }; | |
64 | ||
65 | /* Define accessory cable type */ | |
66 | enum max77843_muic_accessory_type { | |
67 | MAX77843_MUIC_ADC_GROUND = 0, | |
68 | MAX77843_MUIC_ADC_SEND_END_BUTTON, | |
69 | MAX77843_MUIC_ADC_REMOTE_S1_BUTTON, | |
70 | MAX77843_MUIC_ADC_REMOTE_S2_BUTTON, | |
71 | MAX77843_MUIC_ADC_REMOTE_S3_BUTTON, | |
72 | MAX77843_MUIC_ADC_REMOTE_S4_BUTTON, | |
73 | MAX77843_MUIC_ADC_REMOTE_S5_BUTTON, | |
74 | MAX77843_MUIC_ADC_REMOTE_S6_BUTTON, | |
75 | MAX77843_MUIC_ADC_REMOTE_S7_BUTTON, | |
76 | MAX77843_MUIC_ADC_REMOTE_S8_BUTTON, | |
77 | MAX77843_MUIC_ADC_REMOTE_S9_BUTTON, | |
78 | MAX77843_MUIC_ADC_REMOTE_S10_BUTTON, | |
79 | MAX77843_MUIC_ADC_REMOTE_S11_BUTTON, | |
80 | MAX77843_MUIC_ADC_REMOTE_S12_BUTTON, | |
81 | MAX77843_MUIC_ADC_RESERVED_ACC_1, | |
82 | MAX77843_MUIC_ADC_RESERVED_ACC_2, | |
4a4a8714 | 83 | MAX77843_MUIC_ADC_RESERVED_ACC_3, /* SmartDock */ |
27a28d32 JK |
84 | MAX77843_MUIC_ADC_RESERVED_ACC_4, |
85 | MAX77843_MUIC_ADC_RESERVED_ACC_5, | |
86 | MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2, | |
87 | MAX77843_MUIC_ADC_PHONE_POWERED_DEV, | |
88 | MAX77843_MUIC_ADC_TTY_CONVERTER, | |
89 | MAX77843_MUIC_ADC_UART_CABLE, | |
90 | MAX77843_MUIC_ADC_CEA936A_TYPE1_CHG, | |
91 | MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF, | |
92 | MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON, | |
93 | MAX77843_MUIC_ADC_AV_CABLE_NOLOAD, | |
94 | MAX77843_MUIC_ADC_CEA936A_TYPE2_CHG, | |
95 | MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF, | |
96 | MAX77843_MUIC_ADC_FACTORY_MODE_UART_ON, | |
97 | MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE1, | |
98 | MAX77843_MUIC_ADC_OPEN, | |
99 | ||
af57fa4d SR |
100 | /* |
101 | * The below accessories should check | |
102 | * not only ADC value but also ADC1K and VBVolt value. | |
103 | */ | |
27a28d32 JK |
104 | /* Offset|ADC1K|VBVolt| */ |
105 | MAX77843_MUIC_GND_USB_HOST = 0x100, /* 0x1| 0| 0| */ | |
106 | MAX77843_MUIC_GND_USB_HOST_VB = 0x101, /* 0x1| 0| 1| */ | |
107 | MAX77843_MUIC_GND_MHL = 0x102, /* 0x1| 1| 0| */ | |
108 | MAX77843_MUIC_GND_MHL_VB = 0x103, /* 0x1| 1| 1| */ | |
109 | }; | |
110 | ||
111 | /* Define charger cable type */ | |
112 | enum max77843_muic_charger_type { | |
113 | MAX77843_MUIC_CHG_NONE = 0, | |
114 | MAX77843_MUIC_CHG_USB, | |
115 | MAX77843_MUIC_CHG_DOWNSTREAM, | |
116 | MAX77843_MUIC_CHG_DEDICATED, | |
117 | MAX77843_MUIC_CHG_SPECIAL_500MA, | |
118 | MAX77843_MUIC_CHG_SPECIAL_1A, | |
119 | MAX77843_MUIC_CHG_SPECIAL_BIAS, | |
120 | MAX77843_MUIC_CHG_RESERVED, | |
121 | MAX77843_MUIC_CHG_GND, | |
4a4a8714 | 122 | MAX77843_MUIC_CHG_DOCK, |
27a28d32 JK |
123 | }; |
124 | ||
73b6ecdb | 125 | static const unsigned int max77843_extcon_cable[] = { |
2a9de9c0 CC |
126 | EXTCON_USB, |
127 | EXTCON_USB_HOST, | |
8b45b6a0 | 128 | EXTCON_CHG_USB_SDP, |
11eecf91 CC |
129 | EXTCON_CHG_USB_DCP, |
130 | EXTCON_CHG_USB_CDP, | |
131 | EXTCON_CHG_USB_FAST, | |
132 | EXTCON_CHG_USB_SLOW, | |
133 | EXTCON_DISP_MHL, | |
4a4a8714 | 134 | EXTCON_DOCK, |
2a9de9c0 CC |
135 | EXTCON_JIG, |
136 | EXTCON_NONE, | |
27a28d32 JK |
137 | }; |
138 | ||
139 | struct max77843_muic_irq { | |
140 | unsigned int irq; | |
141 | const char *name; | |
142 | unsigned int virq; | |
143 | }; | |
144 | ||
145 | static struct max77843_muic_irq max77843_muic_irqs[] = { | |
146 | { MAX77843_MUIC_IRQ_INT1_ADC, "MUIC-ADC" }, | |
147 | { MAX77843_MUIC_IRQ_INT1_ADCERROR, "MUIC-ADC_ERROR" }, | |
148 | { MAX77843_MUIC_IRQ_INT1_ADC1K, "MUIC-ADC1K" }, | |
149 | { MAX77843_MUIC_IRQ_INT2_CHGTYP, "MUIC-CHGTYP" }, | |
150 | { MAX77843_MUIC_IRQ_INT2_CHGDETRUN, "MUIC-CHGDETRUN" }, | |
151 | { MAX77843_MUIC_IRQ_INT2_DCDTMR, "MUIC-DCDTMR" }, | |
152 | { MAX77843_MUIC_IRQ_INT2_DXOVP, "MUIC-DXOVP" }, | |
153 | { MAX77843_MUIC_IRQ_INT2_VBVOLT, "MUIC-VBVOLT" }, | |
154 | { MAX77843_MUIC_IRQ_INT3_VBADC, "MUIC-VBADC" }, | |
155 | { MAX77843_MUIC_IRQ_INT3_VDNMON, "MUIC-VDNMON" }, | |
156 | { MAX77843_MUIC_IRQ_INT3_DNRES, "MUIC-DNRES" }, | |
157 | { MAX77843_MUIC_IRQ_INT3_MPNACK, "MUIC-MPNACK"}, | |
158 | { MAX77843_MUIC_IRQ_INT3_MRXBUFOW, "MUIC-MRXBUFOW"}, | |
159 | { MAX77843_MUIC_IRQ_INT3_MRXTRF, "MUIC-MRXTRF"}, | |
160 | { MAX77843_MUIC_IRQ_INT3_MRXPERR, "MUIC-MRXPERR"}, | |
161 | { MAX77843_MUIC_IRQ_INT3_MRXRDY, "MUIC-MRXRDY"}, | |
162 | }; | |
163 | ||
164 | static const struct regmap_config max77843_muic_regmap_config = { | |
165 | .reg_bits = 8, | |
166 | .val_bits = 8, | |
167 | .max_register = MAX77843_MUIC_REG_END, | |
168 | }; | |
169 | ||
170 | static const struct regmap_irq max77843_muic_irq[] = { | |
171 | /* INT1 interrupt */ | |
172 | { .reg_offset = 0, .mask = MAX77843_MUIC_ADC, }, | |
173 | { .reg_offset = 0, .mask = MAX77843_MUIC_ADCERROR, }, | |
174 | { .reg_offset = 0, .mask = MAX77843_MUIC_ADC1K, }, | |
175 | ||
176 | /* INT2 interrupt */ | |
177 | { .reg_offset = 1, .mask = MAX77843_MUIC_CHGTYP, }, | |
178 | { .reg_offset = 1, .mask = MAX77843_MUIC_CHGDETRUN, }, | |
179 | { .reg_offset = 1, .mask = MAX77843_MUIC_DCDTMR, }, | |
180 | { .reg_offset = 1, .mask = MAX77843_MUIC_DXOVP, }, | |
181 | { .reg_offset = 1, .mask = MAX77843_MUIC_VBVOLT, }, | |
182 | ||
183 | /* INT3 interrupt */ | |
184 | { .reg_offset = 2, .mask = MAX77843_MUIC_VBADC, }, | |
185 | { .reg_offset = 2, .mask = MAX77843_MUIC_VDNMON, }, | |
186 | { .reg_offset = 2, .mask = MAX77843_MUIC_DNRES, }, | |
187 | { .reg_offset = 2, .mask = MAX77843_MUIC_MPNACK, }, | |
188 | { .reg_offset = 2, .mask = MAX77843_MUIC_MRXBUFOW, }, | |
189 | { .reg_offset = 2, .mask = MAX77843_MUIC_MRXTRF, }, | |
190 | { .reg_offset = 2, .mask = MAX77843_MUIC_MRXPERR, }, | |
191 | { .reg_offset = 2, .mask = MAX77843_MUIC_MRXRDY, }, | |
192 | }; | |
193 | ||
194 | static const struct regmap_irq_chip max77843_muic_irq_chip = { | |
195 | .name = "max77843-muic", | |
196 | .status_base = MAX77843_MUIC_REG_INT1, | |
197 | .mask_base = MAX77843_MUIC_REG_INTMASK1, | |
198 | .mask_invert = true, | |
199 | .num_regs = 3, | |
200 | .irqs = max77843_muic_irq, | |
201 | .num_irqs = ARRAY_SIZE(max77843_muic_irq), | |
202 | }; | |
203 | ||
204 | static int max77843_muic_set_path(struct max77843_muic_info *info, | |
4a4a8714 | 205 | u8 val, bool attached, bool nobccomp) |
27a28d32 | 206 | { |
bc1aadc1 | 207 | struct max77693_dev *max77843 = info->max77843; |
27a28d32 JK |
208 | int ret = 0; |
209 | unsigned int ctrl1, ctrl2; | |
210 | ||
211 | if (attached) | |
212 | ctrl1 = val; | |
213 | else | |
309a3e00 | 214 | ctrl1 = MAX77843_MUIC_CONTROL1_SW_OPEN; |
4a4a8714 MS |
215 | if (nobccomp) { |
216 | /* Disable BC1.2 protocol and force manual switch control */ | |
217 | ctrl1 |= MAX77843_MUIC_CONTROL1_NOBCCOMP_MASK; | |
218 | } | |
27a28d32 JK |
219 | |
220 | ret = regmap_update_bits(max77843->regmap_muic, | |
221 | MAX77843_MUIC_REG_CONTROL1, | |
4a4a8714 MS |
222 | MAX77843_MUIC_CONTROL1_COM_SW | |
223 | MAX77843_MUIC_CONTROL1_NOBCCOMP_MASK, | |
224 | ctrl1); | |
27a28d32 JK |
225 | if (ret < 0) { |
226 | dev_err(info->dev, "Cannot switch MUIC port\n"); | |
227 | return ret; | |
228 | } | |
229 | ||
230 | if (attached) | |
231 | ctrl2 = MAX77843_MUIC_CONTROL2_CPEN_MASK; | |
232 | else | |
233 | ctrl2 = MAX77843_MUIC_CONTROL2_LOWPWR_MASK; | |
234 | ||
235 | ret = regmap_update_bits(max77843->regmap_muic, | |
236 | MAX77843_MUIC_REG_CONTROL2, | |
237 | MAX77843_MUIC_CONTROL2_LOWPWR_MASK | | |
238 | MAX77843_MUIC_CONTROL2_CPEN_MASK, ctrl2); | |
239 | if (ret < 0) { | |
240 | dev_err(info->dev, "Cannot update lowpower mode\n"); | |
241 | return ret; | |
242 | } | |
243 | ||
244 | dev_dbg(info->dev, | |
245 | "CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n", | |
246 | ctrl1, ctrl2, attached ? "attached" : "detached"); | |
247 | ||
248 | return 0; | |
249 | } | |
250 | ||
7b965110 MS |
251 | static void max77843_charger_set_otg_vbus(struct max77843_muic_info *info, |
252 | bool on) | |
253 | { | |
254 | struct max77693_dev *max77843 = info->max77843; | |
255 | unsigned int cnfg00; | |
256 | ||
257 | if (on) | |
258 | cnfg00 = MAX77843_CHG_OTG_MASK | MAX77843_CHG_BOOST_MASK; | |
259 | else | |
260 | cnfg00 = MAX77843_CHG_ENABLE | MAX77843_CHG_BUCK_MASK; | |
261 | ||
262 | regmap_update_bits(max77843->regmap_chg, MAX77843_CHG_REG_CHG_CNFG_00, | |
263 | MAX77843_CHG_MODE_MASK, cnfg00); | |
264 | } | |
265 | ||
27a28d32 JK |
266 | static int max77843_muic_get_cable_type(struct max77843_muic_info *info, |
267 | enum max77843_muic_cable_group group, bool *attached) | |
268 | { | |
269 | int adc, chg_type, cable_type, gnd_type; | |
270 | ||
271 | adc = info->status[MAX77843_MUIC_STATUS1] & | |
272 | MAX77843_MUIC_STATUS1_ADC_MASK; | |
309a3e00 | 273 | adc >>= MAX77843_MUIC_STATUS1_ADC_SHIFT; |
27a28d32 JK |
274 | |
275 | switch (group) { | |
276 | case MAX77843_CABLE_GROUP_ADC: | |
277 | if (adc == MAX77843_MUIC_ADC_OPEN) { | |
278 | *attached = false; | |
279 | cable_type = info->prev_cable_type; | |
280 | info->prev_cable_type = MAX77843_MUIC_ADC_OPEN; | |
281 | } else { | |
282 | *attached = true; | |
283 | cable_type = info->prev_cable_type = adc; | |
284 | } | |
285 | break; | |
286 | case MAX77843_CABLE_GROUP_CHG: | |
287 | chg_type = info->status[MAX77843_MUIC_STATUS2] & | |
288 | MAX77843_MUIC_STATUS2_CHGTYP_MASK; | |
289 | ||
290 | /* Check GROUND accessory with charger cable */ | |
291 | if (adc == MAX77843_MUIC_ADC_GROUND) { | |
292 | if (chg_type == MAX77843_MUIC_CHG_NONE) { | |
af57fa4d SR |
293 | /* |
294 | * The following state when charger cable is | |
27a28d32 | 295 | * disconnected but the GROUND accessory still |
af57fa4d SR |
296 | * connected. |
297 | */ | |
27a28d32 JK |
298 | *attached = false; |
299 | cable_type = info->prev_chg_type; | |
300 | info->prev_chg_type = MAX77843_MUIC_CHG_NONE; | |
301 | } else { | |
302 | ||
af57fa4d SR |
303 | /* |
304 | * The following state when charger cable is | |
305 | * connected on the GROUND accessory. | |
306 | */ | |
27a28d32 JK |
307 | *attached = true; |
308 | cable_type = MAX77843_MUIC_CHG_GND; | |
309 | info->prev_chg_type = MAX77843_MUIC_CHG_GND; | |
310 | } | |
311 | break; | |
312 | } | |
313 | ||
4a4a8714 MS |
314 | if (adc == MAX77843_MUIC_ADC_RESERVED_ACC_3) { /* SmartDock */ |
315 | if (chg_type == MAX77843_MUIC_CHG_NONE) { | |
316 | *attached = false; | |
317 | cable_type = info->prev_chg_type; | |
318 | info->prev_chg_type = MAX77843_MUIC_CHG_NONE; | |
319 | } else { | |
320 | *attached = true; | |
321 | cable_type = MAX77843_MUIC_CHG_DOCK; | |
322 | info->prev_chg_type = MAX77843_MUIC_CHG_DOCK; | |
323 | } | |
324 | break; | |
325 | } | |
326 | ||
27a28d32 JK |
327 | if (chg_type == MAX77843_MUIC_CHG_NONE) { |
328 | *attached = false; | |
329 | cable_type = info->prev_chg_type; | |
330 | info->prev_chg_type = MAX77843_MUIC_CHG_NONE; | |
331 | } else { | |
332 | *attached = true; | |
333 | cable_type = info->prev_chg_type = chg_type; | |
334 | } | |
335 | break; | |
336 | case MAX77843_CABLE_GROUP_ADC_GND: | |
337 | if (adc == MAX77843_MUIC_ADC_OPEN) { | |
338 | *attached = false; | |
339 | cable_type = info->prev_gnd_type; | |
340 | info->prev_gnd_type = MAX77843_MUIC_ADC_OPEN; | |
341 | } else { | |
342 | *attached = true; | |
343 | ||
af57fa4d SR |
344 | /* |
345 | * Offset|ADC1K|VBVolt| | |
27a28d32 JK |
346 | * 0x1| 0| 0| USB-HOST |
347 | * 0x1| 0| 1| USB-HOST with VB | |
348 | * 0x1| 1| 0| MHL | |
af57fa4d SR |
349 | * 0x1| 1| 1| MHL with VB |
350 | */ | |
27a28d32 JK |
351 | /* Get ADC1K register bit */ |
352 | gnd_type = (info->status[MAX77843_MUIC_STATUS1] & | |
353 | MAX77843_MUIC_STATUS1_ADC1K_MASK); | |
354 | ||
355 | /* Get VBVolt register bit */ | |
356 | gnd_type |= (info->status[MAX77843_MUIC_STATUS2] & | |
357 | MAX77843_MUIC_STATUS2_VBVOLT_MASK); | |
309a3e00 | 358 | gnd_type >>= MAX77843_MUIC_STATUS2_VBVOLT_SHIFT; |
27a28d32 JK |
359 | |
360 | /* Offset of GND cable */ | |
361 | gnd_type |= MAX77843_MUIC_GND_USB_HOST; | |
362 | cable_type = info->prev_gnd_type = gnd_type; | |
363 | } | |
364 | break; | |
365 | default: | |
366 | dev_err(info->dev, "Unknown cable group (%d)\n", group); | |
367 | cable_type = -EINVAL; | |
368 | break; | |
369 | } | |
370 | ||
371 | return cable_type; | |
372 | } | |
373 | ||
374 | static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info) | |
375 | { | |
376 | int ret, gnd_cable_type; | |
377 | bool attached; | |
378 | ||
379 | gnd_cable_type = max77843_muic_get_cable_type(info, | |
380 | MAX77843_CABLE_GROUP_ADC_GND, &attached); | |
381 | dev_dbg(info->dev, "external connector is %s (gnd:0x%02x)\n", | |
382 | attached ? "attached" : "detached", gnd_cable_type); | |
383 | ||
384 | switch (gnd_cable_type) { | |
385 | case MAX77843_MUIC_GND_USB_HOST: | |
386 | case MAX77843_MUIC_GND_USB_HOST_VB: | |
309a3e00 KK |
387 | ret = max77843_muic_set_path(info, |
388 | MAX77843_MUIC_CONTROL1_SW_USB, | |
4a4a8714 | 389 | attached, false); |
27a28d32 JK |
390 | if (ret < 0) |
391 | return ret; | |
392 | ||
8670b459 | 393 | extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached); |
7b965110 | 394 | max77843_charger_set_otg_vbus(info, attached); |
27a28d32 JK |
395 | break; |
396 | case MAX77843_MUIC_GND_MHL_VB: | |
397 | case MAX77843_MUIC_GND_MHL: | |
309a3e00 KK |
398 | ret = max77843_muic_set_path(info, |
399 | MAX77843_MUIC_CONTROL1_SW_OPEN, | |
4a4a8714 | 400 | attached, false); |
27a28d32 JK |
401 | if (ret < 0) |
402 | return ret; | |
403 | ||
8670b459 | 404 | extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached); |
27a28d32 JK |
405 | break; |
406 | default: | |
407 | dev_err(info->dev, "failed to detect %s accessory(gnd:0x%x)\n", | |
408 | attached ? "attached" : "detached", gnd_cable_type); | |
409 | return -EINVAL; | |
410 | } | |
411 | ||
412 | return 0; | |
413 | } | |
414 | ||
415 | static int max77843_muic_jig_handler(struct max77843_muic_info *info, | |
416 | int cable_type, bool attached) | |
417 | { | |
418 | int ret; | |
309a3e00 | 419 | u8 path = MAX77843_MUIC_CONTROL1_SW_OPEN; |
27a28d32 JK |
420 | |
421 | dev_dbg(info->dev, "external connector is %s (adc:0x%02x)\n", | |
422 | attached ? "attached" : "detached", cable_type); | |
423 | ||
424 | switch (cable_type) { | |
425 | case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF: | |
27a28d32 | 426 | case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON: |
309a3e00 | 427 | path = MAX77843_MUIC_CONTROL1_SW_USB; |
27a28d32 JK |
428 | break; |
429 | case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF: | |
309a3e00 | 430 | path = MAX77843_MUIC_CONTROL1_SW_UART; |
27a28d32 JK |
431 | break; |
432 | default: | |
41b3c015 | 433 | return -EINVAL; |
27a28d32 JK |
434 | } |
435 | ||
4a4a8714 | 436 | ret = max77843_muic_set_path(info, path, attached, false); |
41b3c015 CC |
437 | if (ret < 0) |
438 | return ret; | |
439 | ||
8670b459 | 440 | extcon_set_state_sync(info->edev, EXTCON_JIG, attached); |
41b3c015 | 441 | |
27a28d32 JK |
442 | return 0; |
443 | } | |
444 | ||
4a4a8714 MS |
445 | static int max77843_muic_dock_handler(struct max77843_muic_info *info, |
446 | bool attached) | |
447 | { | |
448 | int ret; | |
449 | ||
450 | dev_dbg(info->dev, "external connector is %s (adc: 0x10)\n", | |
451 | attached ? "attached" : "detached"); | |
452 | ||
453 | ret = max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_USB, | |
454 | attached, attached); | |
455 | if (ret < 0) | |
456 | return ret; | |
457 | ||
458 | extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached); | |
459 | extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached); | |
460 | extcon_set_state_sync(info->edev, EXTCON_DOCK, attached); | |
461 | ||
462 | return 0; | |
463 | } | |
464 | ||
27a28d32 JK |
465 | static int max77843_muic_adc_handler(struct max77843_muic_info *info) |
466 | { | |
467 | int ret, cable_type; | |
468 | bool attached; | |
469 | ||
470 | cable_type = max77843_muic_get_cable_type(info, | |
471 | MAX77843_CABLE_GROUP_ADC, &attached); | |
472 | ||
473 | dev_dbg(info->dev, | |
474 | "external connector is %s (adc:0x%02x, prev_adc:0x%x)\n", | |
475 | attached ? "attached" : "detached", cable_type, | |
476 | info->prev_cable_type); | |
477 | ||
478 | switch (cable_type) { | |
4a4a8714 MS |
479 | case MAX77843_MUIC_ADC_RESERVED_ACC_3: /* SmartDock */ |
480 | ret = max77843_muic_dock_handler(info, attached); | |
481 | if (ret < 0) | |
482 | return ret; | |
483 | break; | |
27a28d32 JK |
484 | case MAX77843_MUIC_ADC_GROUND: |
485 | ret = max77843_muic_adc_gnd_handler(info); | |
486 | if (ret < 0) | |
487 | return ret; | |
488 | break; | |
489 | case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF: | |
490 | case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON: | |
491 | case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF: | |
492 | ret = max77843_muic_jig_handler(info, cable_type, attached); | |
493 | if (ret < 0) | |
494 | return ret; | |
495 | break; | |
496 | case MAX77843_MUIC_ADC_SEND_END_BUTTON: | |
497 | case MAX77843_MUIC_ADC_REMOTE_S1_BUTTON: | |
498 | case MAX77843_MUIC_ADC_REMOTE_S2_BUTTON: | |
499 | case MAX77843_MUIC_ADC_REMOTE_S3_BUTTON: | |
500 | case MAX77843_MUIC_ADC_REMOTE_S4_BUTTON: | |
501 | case MAX77843_MUIC_ADC_REMOTE_S5_BUTTON: | |
502 | case MAX77843_MUIC_ADC_REMOTE_S6_BUTTON: | |
503 | case MAX77843_MUIC_ADC_REMOTE_S7_BUTTON: | |
504 | case MAX77843_MUIC_ADC_REMOTE_S8_BUTTON: | |
505 | case MAX77843_MUIC_ADC_REMOTE_S9_BUTTON: | |
506 | case MAX77843_MUIC_ADC_REMOTE_S10_BUTTON: | |
507 | case MAX77843_MUIC_ADC_REMOTE_S11_BUTTON: | |
508 | case MAX77843_MUIC_ADC_REMOTE_S12_BUTTON: | |
509 | case MAX77843_MUIC_ADC_RESERVED_ACC_1: | |
510 | case MAX77843_MUIC_ADC_RESERVED_ACC_2: | |
27a28d32 JK |
511 | case MAX77843_MUIC_ADC_RESERVED_ACC_4: |
512 | case MAX77843_MUIC_ADC_RESERVED_ACC_5: | |
513 | case MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2: | |
514 | case MAX77843_MUIC_ADC_PHONE_POWERED_DEV: | |
515 | case MAX77843_MUIC_ADC_TTY_CONVERTER: | |
516 | case MAX77843_MUIC_ADC_UART_CABLE: | |
517 | case MAX77843_MUIC_ADC_CEA936A_TYPE1_CHG: | |
518 | case MAX77843_MUIC_ADC_AV_CABLE_NOLOAD: | |
519 | case MAX77843_MUIC_ADC_CEA936A_TYPE2_CHG: | |
520 | case MAX77843_MUIC_ADC_FACTORY_MODE_UART_ON: | |
521 | case MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE1: | |
522 | case MAX77843_MUIC_ADC_OPEN: | |
523 | dev_err(info->dev, | |
524 | "accessory is %s but it isn't used (adc:0x%x)\n", | |
525 | attached ? "attached" : "detached", cable_type); | |
526 | return -EAGAIN; | |
527 | default: | |
528 | dev_err(info->dev, | |
529 | "failed to detect %s accessory (adc:0x%x)\n", | |
530 | attached ? "attached" : "detached", cable_type); | |
531 | return -EINVAL; | |
532 | } | |
533 | ||
534 | return 0; | |
535 | } | |
536 | ||
537 | static int max77843_muic_chg_handler(struct max77843_muic_info *info) | |
538 | { | |
539 | int ret, chg_type, gnd_type; | |
540 | bool attached; | |
541 | ||
542 | chg_type = max77843_muic_get_cable_type(info, | |
543 | MAX77843_CABLE_GROUP_CHG, &attached); | |
544 | ||
545 | dev_dbg(info->dev, | |
546 | "external connector is %s(chg_type:0x%x, prev_chg_type:0x%x)\n", | |
547 | attached ? "attached" : "detached", | |
548 | chg_type, info->prev_chg_type); | |
549 | ||
550 | switch (chg_type) { | |
551 | case MAX77843_MUIC_CHG_USB: | |
309a3e00 KK |
552 | ret = max77843_muic_set_path(info, |
553 | MAX77843_MUIC_CONTROL1_SW_USB, | |
4a4a8714 | 554 | attached, false); |
27a28d32 JK |
555 | if (ret < 0) |
556 | return ret; | |
557 | ||
8670b459 CC |
558 | extcon_set_state_sync(info->edev, EXTCON_USB, attached); |
559 | extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP, | |
8b45b6a0 | 560 | attached); |
27a28d32 JK |
561 | break; |
562 | case MAX77843_MUIC_CHG_DOWNSTREAM: | |
309a3e00 KK |
563 | ret = max77843_muic_set_path(info, |
564 | MAX77843_MUIC_CONTROL1_SW_OPEN, | |
4a4a8714 | 565 | attached, false); |
27a28d32 JK |
566 | if (ret < 0) |
567 | return ret; | |
568 | ||
8670b459 | 569 | extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP, |
2a9de9c0 | 570 | attached); |
27a28d32 JK |
571 | break; |
572 | case MAX77843_MUIC_CHG_DEDICATED: | |
309a3e00 KK |
573 | ret = max77843_muic_set_path(info, |
574 | MAX77843_MUIC_CONTROL1_SW_OPEN, | |
4a4a8714 | 575 | attached, false); |
27a28d32 JK |
576 | if (ret < 0) |
577 | return ret; | |
578 | ||
8670b459 | 579 | extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, |
11eecf91 | 580 | attached); |
27a28d32 JK |
581 | break; |
582 | case MAX77843_MUIC_CHG_SPECIAL_500MA: | |
309a3e00 KK |
583 | ret = max77843_muic_set_path(info, |
584 | MAX77843_MUIC_CONTROL1_SW_OPEN, | |
4a4a8714 | 585 | attached, false); |
27a28d32 JK |
586 | if (ret < 0) |
587 | return ret; | |
588 | ||
8670b459 | 589 | extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW, |
2a9de9c0 | 590 | attached); |
27a28d32 JK |
591 | break; |
592 | case MAX77843_MUIC_CHG_SPECIAL_1A: | |
309a3e00 KK |
593 | ret = max77843_muic_set_path(info, |
594 | MAX77843_MUIC_CONTROL1_SW_OPEN, | |
4a4a8714 | 595 | attached, false); |
27a28d32 JK |
596 | if (ret < 0) |
597 | return ret; | |
598 | ||
8670b459 | 599 | extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST, |
2a9de9c0 | 600 | attached); |
27a28d32 JK |
601 | break; |
602 | case MAX77843_MUIC_CHG_GND: | |
603 | gnd_type = max77843_muic_get_cable_type(info, | |
604 | MAX77843_CABLE_GROUP_ADC_GND, &attached); | |
605 | ||
606 | /* Charger cable on MHL accessory is attach or detach */ | |
607 | if (gnd_type == MAX77843_MUIC_GND_MHL_VB) | |
8670b459 | 608 | extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, |
11eecf91 | 609 | true); |
27a28d32 | 610 | else if (gnd_type == MAX77843_MUIC_GND_MHL) |
8670b459 | 611 | extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, |
11eecf91 | 612 | false); |
27a28d32 | 613 | break; |
4a4a8714 MS |
614 | case MAX77843_MUIC_CHG_DOCK: |
615 | extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, attached); | |
616 | break; | |
27a28d32 JK |
617 | case MAX77843_MUIC_CHG_NONE: |
618 | break; | |
619 | default: | |
620 | dev_err(info->dev, | |
621 | "failed to detect %s accessory (chg_type:0x%x)\n", | |
622 | attached ? "attached" : "detached", chg_type); | |
623 | ||
309a3e00 | 624 | max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_OPEN, |
4a4a8714 | 625 | attached, false); |
27a28d32 JK |
626 | return -EINVAL; |
627 | } | |
628 | ||
629 | return 0; | |
630 | } | |
631 | ||
632 | static void max77843_muic_irq_work(struct work_struct *work) | |
633 | { | |
634 | struct max77843_muic_info *info = container_of(work, | |
635 | struct max77843_muic_info, irq_work); | |
bc1aadc1 | 636 | struct max77693_dev *max77843 = info->max77843; |
27a28d32 JK |
637 | int ret = 0; |
638 | ||
639 | mutex_lock(&info->mutex); | |
640 | ||
641 | ret = regmap_bulk_read(max77843->regmap_muic, | |
642 | MAX77843_MUIC_REG_STATUS1, info->status, | |
643 | MAX77843_MUIC_STATUS_NUM); | |
644 | if (ret) { | |
645 | dev_err(info->dev, "Cannot read STATUS registers\n"); | |
646 | mutex_unlock(&info->mutex); | |
647 | return; | |
648 | } | |
649 | ||
650 | if (info->irq_adc) { | |
651 | ret = max77843_muic_adc_handler(info); | |
652 | if (ret) | |
653 | dev_err(info->dev, "Unknown cable type\n"); | |
654 | info->irq_adc = false; | |
655 | } | |
656 | ||
657 | if (info->irq_chg) { | |
658 | ret = max77843_muic_chg_handler(info); | |
659 | if (ret) | |
660 | dev_err(info->dev, "Unknown charger type\n"); | |
661 | info->irq_chg = false; | |
662 | } | |
663 | ||
664 | mutex_unlock(&info->mutex); | |
665 | } | |
666 | ||
667 | static irqreturn_t max77843_muic_irq_handler(int irq, void *data) | |
668 | { | |
669 | struct max77843_muic_info *info = data; | |
670 | int i, irq_type = -1; | |
671 | ||
672 | for (i = 0; i < ARRAY_SIZE(max77843_muic_irqs); i++) | |
673 | if (irq == max77843_muic_irqs[i].virq) | |
674 | irq_type = max77843_muic_irqs[i].irq; | |
675 | ||
676 | switch (irq_type) { | |
677 | case MAX77843_MUIC_IRQ_INT1_ADC: | |
678 | case MAX77843_MUIC_IRQ_INT1_ADCERROR: | |
679 | case MAX77843_MUIC_IRQ_INT1_ADC1K: | |
680 | info->irq_adc = true; | |
681 | break; | |
682 | case MAX77843_MUIC_IRQ_INT2_CHGTYP: | |
683 | case MAX77843_MUIC_IRQ_INT2_CHGDETRUN: | |
684 | case MAX77843_MUIC_IRQ_INT2_DCDTMR: | |
685 | case MAX77843_MUIC_IRQ_INT2_DXOVP: | |
686 | case MAX77843_MUIC_IRQ_INT2_VBVOLT: | |
687 | info->irq_chg = true; | |
688 | break; | |
689 | case MAX77843_MUIC_IRQ_INT3_VBADC: | |
690 | case MAX77843_MUIC_IRQ_INT3_VDNMON: | |
691 | case MAX77843_MUIC_IRQ_INT3_DNRES: | |
692 | case MAX77843_MUIC_IRQ_INT3_MPNACK: | |
693 | case MAX77843_MUIC_IRQ_INT3_MRXBUFOW: | |
694 | case MAX77843_MUIC_IRQ_INT3_MRXTRF: | |
695 | case MAX77843_MUIC_IRQ_INT3_MRXPERR: | |
696 | case MAX77843_MUIC_IRQ_INT3_MRXRDY: | |
697 | break; | |
698 | default: | |
699 | dev_err(info->dev, "Cannot recognize IRQ(%d)\n", irq_type); | |
700 | break; | |
701 | } | |
702 | ||
703 | schedule_work(&info->irq_work); | |
704 | ||
705 | return IRQ_HANDLED; | |
706 | } | |
707 | ||
708 | static void max77843_muic_detect_cable_wq(struct work_struct *work) | |
709 | { | |
710 | struct max77843_muic_info *info = container_of(to_delayed_work(work), | |
711 | struct max77843_muic_info, wq_detcable); | |
bc1aadc1 | 712 | struct max77693_dev *max77843 = info->max77843; |
27a28d32 JK |
713 | int chg_type, adc, ret; |
714 | bool attached; | |
715 | ||
716 | mutex_lock(&info->mutex); | |
717 | ||
718 | ret = regmap_bulk_read(max77843->regmap_muic, | |
719 | MAX77843_MUIC_REG_STATUS1, info->status, | |
720 | MAX77843_MUIC_STATUS_NUM); | |
721 | if (ret) { | |
722 | dev_err(info->dev, "Cannot read STATUS registers\n"); | |
723 | goto err_cable_wq; | |
724 | } | |
725 | ||
726 | adc = max77843_muic_get_cable_type(info, | |
727 | MAX77843_CABLE_GROUP_ADC, &attached); | |
728 | if (attached && adc != MAX77843_MUIC_ADC_OPEN) { | |
729 | ret = max77843_muic_adc_handler(info); | |
730 | if (ret < 0) { | |
731 | dev_err(info->dev, "Cannot detect accessory\n"); | |
732 | goto err_cable_wq; | |
733 | } | |
734 | } | |
735 | ||
736 | chg_type = max77843_muic_get_cable_type(info, | |
737 | MAX77843_CABLE_GROUP_CHG, &attached); | |
738 | if (attached && chg_type != MAX77843_MUIC_CHG_NONE) { | |
739 | ret = max77843_muic_chg_handler(info); | |
740 | if (ret < 0) { | |
741 | dev_err(info->dev, "Cannot detect charger accessory\n"); | |
742 | goto err_cable_wq; | |
743 | } | |
744 | } | |
745 | ||
746 | err_cable_wq: | |
747 | mutex_unlock(&info->mutex); | |
748 | } | |
749 | ||
750 | static int max77843_muic_set_debounce_time(struct max77843_muic_info *info, | |
751 | enum max77843_muic_adc_debounce_time time) | |
752 | { | |
bc1aadc1 | 753 | struct max77693_dev *max77843 = info->max77843; |
d927c590 | 754 | int ret; |
27a28d32 JK |
755 | |
756 | switch (time) { | |
757 | case MAX77843_DEBOUNCE_TIME_5MS: | |
758 | case MAX77843_DEBOUNCE_TIME_10MS: | |
759 | case MAX77843_DEBOUNCE_TIME_25MS: | |
760 | case MAX77843_DEBOUNCE_TIME_38_62MS: | |
761 | ret = regmap_update_bits(max77843->regmap_muic, | |
762 | MAX77843_MUIC_REG_CONTROL4, | |
763 | MAX77843_MUIC_CONTROL4_ADCDBSET_MASK, | |
309a3e00 | 764 | time << MAX77843_MUIC_CONTROL4_ADCDBSET_SHIFT); |
27a28d32 JK |
765 | if (ret < 0) { |
766 | dev_err(info->dev, "Cannot write MUIC regmap\n"); | |
767 | return ret; | |
768 | } | |
769 | break; | |
770 | default: | |
771 | dev_err(info->dev, "Invalid ADC debounce time\n"); | |
772 | return -EINVAL; | |
773 | } | |
774 | ||
775 | return 0; | |
776 | } | |
777 | ||
bc1aadc1 | 778 | static int max77843_init_muic_regmap(struct max77693_dev *max77843) |
27a28d32 JK |
779 | { |
780 | int ret; | |
781 | ||
782 | max77843->i2c_muic = i2c_new_dummy(max77843->i2c->adapter, | |
783 | I2C_ADDR_MUIC); | |
784 | if (!max77843->i2c_muic) { | |
785 | dev_err(&max77843->i2c->dev, | |
786 | "Cannot allocate I2C device for MUIC\n"); | |
b9b518f5 | 787 | return -ENOMEM; |
27a28d32 JK |
788 | } |
789 | ||
790 | i2c_set_clientdata(max77843->i2c_muic, max77843); | |
791 | ||
792 | max77843->regmap_muic = devm_regmap_init_i2c(max77843->i2c_muic, | |
793 | &max77843_muic_regmap_config); | |
794 | if (IS_ERR(max77843->regmap_muic)) { | |
795 | ret = PTR_ERR(max77843->regmap_muic); | |
796 | goto err_muic_i2c; | |
797 | } | |
798 | ||
799 | ret = regmap_add_irq_chip(max77843->regmap_muic, max77843->irq, | |
800 | IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED, | |
801 | 0, &max77843_muic_irq_chip, &max77843->irq_data_muic); | |
802 | if (ret < 0) { | |
803 | dev_err(&max77843->i2c->dev, "Cannot add MUIC IRQ chip\n"); | |
804 | goto err_muic_i2c; | |
805 | } | |
806 | ||
807 | return 0; | |
808 | ||
809 | err_muic_i2c: | |
810 | i2c_unregister_device(max77843->i2c_muic); | |
811 | ||
812 | return ret; | |
813 | } | |
814 | ||
815 | static int max77843_muic_probe(struct platform_device *pdev) | |
816 | { | |
bc1aadc1 | 817 | struct max77693_dev *max77843 = dev_get_drvdata(pdev->dev.parent); |
27a28d32 JK |
818 | struct max77843_muic_info *info; |
819 | unsigned int id; | |
820 | int i, ret; | |
821 | ||
822 | info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); | |
823 | if (!info) | |
824 | return -ENOMEM; | |
825 | ||
826 | info->dev = &pdev->dev; | |
827 | info->max77843 = max77843; | |
828 | ||
829 | platform_set_drvdata(pdev, info); | |
830 | mutex_init(&info->mutex); | |
831 | ||
832 | /* Initialize i2c and regmap */ | |
833 | ret = max77843_init_muic_regmap(max77843); | |
834 | if (ret) { | |
835 | dev_err(&pdev->dev, "Failed to init MUIC regmap\n"); | |
836 | return ret; | |
837 | } | |
838 | ||
839 | /* Turn off auto detection configuration */ | |
840 | ret = regmap_update_bits(max77843->regmap_muic, | |
841 | MAX77843_MUIC_REG_CONTROL4, | |
842 | MAX77843_MUIC_CONTROL4_USBAUTO_MASK | | |
843 | MAX77843_MUIC_CONTROL4_FCTAUTO_MASK, | |
844 | CONTROL4_AUTO_DISABLE); | |
845 | ||
846 | /* Initialize extcon device */ | |
847 | info->edev = devm_extcon_dev_allocate(&pdev->dev, | |
848 | max77843_extcon_cable); | |
849 | if (IS_ERR(info->edev)) { | |
850 | dev_err(&pdev->dev, "Failed to allocate memory for extcon\n"); | |
851 | ret = -ENODEV; | |
852 | goto err_muic_irq; | |
853 | } | |
854 | ||
855 | ret = devm_extcon_dev_register(&pdev->dev, info->edev); | |
856 | if (ret) { | |
857 | dev_err(&pdev->dev, "Failed to register extcon device\n"); | |
858 | goto err_muic_irq; | |
859 | } | |
860 | ||
861 | /* Set ADC debounce time */ | |
862 | max77843_muic_set_debounce_time(info, MAX77843_DEBOUNCE_TIME_25MS); | |
863 | ||
864 | /* Set initial path for UART */ | |
4a4a8714 MS |
865 | max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_UART, true, |
866 | false); | |
27a28d32 JK |
867 | |
868 | /* Check revision number of MUIC device */ | |
869 | ret = regmap_read(max77843->regmap_muic, MAX77843_MUIC_REG_ID, &id); | |
870 | if (ret < 0) { | |
871 | dev_err(&pdev->dev, "Failed to read revision number\n"); | |
872 | goto err_muic_irq; | |
873 | } | |
874 | dev_info(info->dev, "MUIC device ID : 0x%x\n", id); | |
875 | ||
876 | /* Support virtual irq domain for max77843 MUIC device */ | |
877 | INIT_WORK(&info->irq_work, max77843_muic_irq_work); | |
878 | ||
135d9f7d JK |
879 | /* Clear IRQ bits before request IRQs */ |
880 | ret = regmap_bulk_read(max77843->regmap_muic, | |
881 | MAX77843_MUIC_REG_INT1, info->status, | |
c4924e92 | 882 | MAX77843_MUIC_STATUS_NUM); |
135d9f7d JK |
883 | if (ret) { |
884 | dev_err(&pdev->dev, "Failed to Clear IRQ bits\n"); | |
885 | goto err_muic_irq; | |
886 | } | |
887 | ||
27a28d32 JK |
888 | for (i = 0; i < ARRAY_SIZE(max77843_muic_irqs); i++) { |
889 | struct max77843_muic_irq *muic_irq = &max77843_muic_irqs[i]; | |
c05c0d54 | 890 | int virq = 0; |
27a28d32 JK |
891 | |
892 | virq = regmap_irq_get_virq(max77843->irq_data_muic, | |
893 | muic_irq->irq); | |
894 | if (virq <= 0) { | |
895 | ret = -EINVAL; | |
896 | goto err_muic_irq; | |
897 | } | |
898 | muic_irq->virq = virq; | |
899 | ||
900 | ret = devm_request_threaded_irq(&pdev->dev, virq, NULL, | |
901 | max77843_muic_irq_handler, IRQF_NO_SUSPEND, | |
902 | muic_irq->name, info); | |
903 | if (ret) { | |
904 | dev_err(&pdev->dev, | |
905 | "Failed to request irq (IRQ: %d, error: %d)\n", | |
906 | muic_irq->irq, ret); | |
907 | goto err_muic_irq; | |
908 | } | |
909 | } | |
910 | ||
911 | /* Detect accessory after completing the initialization of platform */ | |
912 | INIT_DELAYED_WORK(&info->wq_detcable, max77843_muic_detect_cable_wq); | |
913 | queue_delayed_work(system_power_efficient_wq, | |
914 | &info->wq_detcable, msecs_to_jiffies(DELAY_MS_DEFAULT)); | |
915 | ||
916 | return 0; | |
917 | ||
918 | err_muic_irq: | |
919 | regmap_del_irq_chip(max77843->irq, max77843->irq_data_muic); | |
920 | i2c_unregister_device(max77843->i2c_muic); | |
921 | ||
922 | return ret; | |
923 | } | |
924 | ||
925 | static int max77843_muic_remove(struct platform_device *pdev) | |
926 | { | |
927 | struct max77843_muic_info *info = platform_get_drvdata(pdev); | |
bc1aadc1 | 928 | struct max77693_dev *max77843 = info->max77843; |
27a28d32 JK |
929 | |
930 | cancel_work_sync(&info->irq_work); | |
931 | regmap_del_irq_chip(max77843->irq, max77843->irq_data_muic); | |
932 | i2c_unregister_device(max77843->i2c_muic); | |
933 | ||
934 | return 0; | |
935 | } | |
936 | ||
937 | static const struct platform_device_id max77843_muic_id[] = { | |
938 | { "max77843-muic", }, | |
939 | { /* sentinel */ }, | |
940 | }; | |
941 | MODULE_DEVICE_TABLE(platform, max77843_muic_id); | |
942 | ||
943 | static struct platform_driver max77843_muic_driver = { | |
944 | .driver = { | |
945 | .name = "max77843-muic", | |
946 | }, | |
947 | .probe = max77843_muic_probe, | |
948 | .remove = max77843_muic_remove, | |
949 | .id_table = max77843_muic_id, | |
950 | }; | |
951 | ||
952 | static int __init max77843_muic_init(void) | |
953 | { | |
954 | return platform_driver_register(&max77843_muic_driver); | |
955 | } | |
956 | subsys_initcall(max77843_muic_init); | |
957 | ||
958 | MODULE_DESCRIPTION("Maxim MAX77843 Extcon driver"); | |
959 | MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>"); | |
960 | MODULE_LICENSE("GPL"); |