]>
Commit | Line | Data |
---|---|---|
a9c5fff5 | 1 | # |
e849dc04 | 2 | # GPIO infrastructure and drivers |
a9c5fff5 DB |
3 | # |
4 | ||
7563bbf8 MB |
5 | config ARCH_HAVE_CUSTOM_GPIO_H |
6 | bool | |
7 | help | |
8 | Selecting this config option from the architecture Kconfig allows | |
9 | the architecture to provide a custom asm/gpio.h implementation | |
10 | overriding the default implementations. New uses of this are | |
11 | strongly discouraged. | |
12 | ||
7444a72e MB |
13 | menuconfig GPIOLIB |
14 | bool "GPIO Support" | |
60a5eaba | 15 | select ANON_INODES |
7444a72e MB |
16 | help |
17 | This enables GPIO support through the generic GPIO library. | |
18 | You only need to enable this, if you also want to enable | |
e849dc04 | 19 | one or more of the GPIO drivers below. |
7444a72e MB |
20 | |
21 | If unsure, say N. | |
a9c5fff5 | 22 | |
7444a72e | 23 | if GPIOLIB |
a9c5fff5 | 24 | |
f141ed65 GL |
25 | config OF_GPIO |
26 | def_bool y | |
92c74bce | 27 | depends on OF |
2527ecc9 | 28 | depends on HAS_IOMEM |
f141ed65 | 29 | |
e29482e8 MN |
30 | config GPIO_ACPI |
31 | def_bool y | |
32 | depends on ACPI | |
33 | ||
14250520 | 34 | config GPIOLIB_IRQCHIP |
fc346270 | 35 | select IRQ_DOMAIN |
14250520 LW |
36 | bool |
37 | ||
a9c5fff5 DB |
38 | config DEBUG_GPIO |
39 | bool "Debug GPIO calls" | |
40 | depends on DEBUG_KERNEL | |
41 | help | |
42 | Say Y here to add some extra checks and diagnostics to GPIO calls. | |
692105b8 ML |
43 | These checks help ensure that GPIOs have been properly initialized |
44 | before they are used, and that sleeping calls are not made from | |
45 | non-sleeping contexts. They can make bitbanged serial protocols | |
a9c5fff5 DB |
46 | slower. The diagnostics help catch the type of setup errors |
47 | that are most common when setting up new platforms or boards. | |
48 | ||
d8f388d8 DB |
49 | config GPIO_SYSFS |
50 | bool "/sys/class/gpio/... (sysfs interface)" | |
4c0ea233 | 51 | depends on SYSFS |
d8f388d8 DB |
52 | help |
53 | Say Y here to add a sysfs interface for GPIOs. | |
54 | ||
55 | This is mostly useful to work around omissions in a system's | |
56 | kernel support. Those are common in custom and semicustom | |
57 | hardware assembled using standard kernels with a minimum of | |
58 | custom patches. In those cases, userspace code may import | |
59 | a given GPIO from the kernel, if no kernel driver requested it. | |
60 | ||
61 | Kernel drivers may also request that a particular GPIO be | |
62 | exported to userspace; this can be useful when debugging. | |
63 | ||
c103de24 | 64 | config GPIO_GENERIC |
3085a4a4 | 65 | depends on HAS_IOMEM # Only for IOMEM drivers |
c103de24 GL |
66 | tristate |
67 | ||
e849dc04 | 68 | # put drivers in the right section, in alphabetical order |
a9c5fff5 | 69 | |
177b0381 | 70 | # This symbol is selected by both I2C and SPI expanders |
e952805d WS |
71 | config GPIO_MAX730X |
72 | tristate | |
73 | ||
177b0381 | 74 | menu "Memory mapped GPIO drivers" |
3085a4a4 | 75 | depends on HAS_IOMEM |
0bcb6069 | 76 | |
af0a33e2 AS |
77 | config GPIO_74XX_MMIO |
78 | tristate "GPIO driver for 74xx-ICs with MMIO access" | |
79 | depends on OF_GPIO | |
80 | select GPIO_GENERIC | |
81 | help | |
82 | Say yes here to support GPIO functionality for 74xx-compatible ICs | |
83 | with MMIO access. Compatible models include: | |
84 | 1 bit: 741G125 (Input), 741G74 (Output) | |
85 | 2 bits: 742G125 (Input), 7474 (Output) | |
86 | 4 bits: 74125 (Input), 74175 (Output) | |
87 | 6 bits: 74365 (Input), 74174 (Output) | |
88 | 8 bits: 74244 (Input), 74273 (Output) | |
89 | 16 bits: 741624 (Input), 7416374 (Output) | |
90 | ||
223fa272 LW |
91 | config GPIO_ALTERA |
92 | tristate "Altera GPIO" | |
93 | depends on OF_GPIO | |
223fa272 LW |
94 | select GPIOLIB_IRQCHIP |
95 | help | |
96 | Say Y or M here to build support for the Altera PIO device. | |
97 | ||
98 | If driver is built as a module it will be called gpio-altera. | |
99 | ||
6057d40f YT |
100 | config GPIO_AMDPT |
101 | tristate "AMD Promontory GPIO support" | |
102 | depends on ACPI | |
574b782e | 103 | select GPIO_GENERIC |
6057d40f YT |
104 | help |
105 | driver for GPIO functionality on Promontory IOHub | |
106 | Require ACPI ASL code to enumerate as a platform device. | |
107 | ||
361b7911 JS |
108 | config GPIO_ASPEED |
109 | tristate "Aspeed GPIO support" | |
110 | depends on (ARCH_ASPEED || COMPILE_TEST) && OF_GPIO | |
111 | select GPIOLIB_IRQCHIP | |
112 | help | |
113 | Say Y here to support Aspeed AST2400 and AST2500 GPIO controllers. | |
114 | ||
ab32770e AB |
115 | config GPIO_ATH79 |
116 | tristate "Atheros AR71XX/AR724X/AR913X GPIO support" | |
117 | default y if ATH79 | |
409d8783 | 118 | depends on ATH79 || COMPILE_TEST |
ab32770e | 119 | select GPIO_GENERIC |
2b8f89e1 | 120 | select GPIOLIB_IRQCHIP |
ab32770e AB |
121 | help |
122 | Select this option to enable GPIO driver for | |
123 | Atheros AR71XX/AR724X/AR913X SoC devices. | |
124 | ||
f72f4b44 MR |
125 | config GPIO_AXP209 |
126 | tristate "X-Powers AXP209 PMIC GPIO Support" | |
127 | depends on MFD_AXP20X | |
128 | help | |
129 | Say yes to enable GPIO support for the AXP209 PMIC | |
130 | ||
ea948cff LW |
131 | config GPIO_BCM_KONA |
132 | bool "Broadcom Kona GPIO" | |
133 | depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST) | |
134 | help | |
135 | Turn on GPIO support for Broadcom "Kona" chips. | |
136 | ||
3b0213d5 GF |
137 | config GPIO_BRCMSTB |
138 | tristate "BRCMSTB GPIO support" | |
a02588a0 FF |
139 | default y if (ARCH_BRCMSTB || BMIPS_GENERIC) |
140 | depends on OF_GPIO && (ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST) | |
3b0213d5 | 141 | select GPIO_GENERIC |
19a7b694 | 142 | select GPIOLIB_IRQCHIP |
3b0213d5 GF |
143 | help |
144 | Say yes here to enable GPIO support for Broadcom STB (BCM7XXX) SoCs. | |
145 | ||
a3b8d4a5 | 146 | config GPIO_CLPS711X |
55fe14ab | 147 | tristate "CLPS711X GPIO support" |
ffd4bf1a | 148 | depends on ARCH_CLPS711X || COMPILE_TEST |
55fe14ab AS |
149 | select GPIO_GENERIC |
150 | help | |
151 | Say yes here to support GPIO on CLPS711X SoCs. | |
a3b8d4a5 | 152 | |
ee89cf63 GS |
153 | config GPIO_DAVINCI |
154 | bool "TI Davinci/Keystone GPIO support" | |
155 | default y if ARCH_DAVINCI | |
156 | depends on ARM && (ARCH_DAVINCI || ARCH_KEYSTONE) | |
157 | help | |
158 | Say yes here to enable GPIO support for TI Davinci/Keystone SoCs. | |
159 | ||
7779b345 JI |
160 | config GPIO_DWAPB |
161 | tristate "Synopsys DesignWare APB GPIO driver" | |
162 | select GPIO_GENERIC | |
163 | select GENERIC_IRQ_CHIP | |
7779b345 JI |
164 | help |
165 | Say Y or M here to build support for the Synopsys DesignWare APB | |
166 | GPIO block. | |
167 | ||
a07e103e MD |
168 | config GPIO_EM |
169 | tristate "Emma Mobile GPIO" | |
22eaf13c | 170 | depends on (ARCH_EMEV2 || COMPILE_TEST) && OF_GPIO |
a07e103e MD |
171 | help |
172 | Say yes here to support GPIO on Renesas Emma Mobile SoCs. | |
173 | ||
c6b52c13 HS |
174 | config GPIO_EP93XX |
175 | def_bool y | |
176 | depends on ARCH_EP93XX | |
1e4c8842 | 177 | select GPIO_GENERIC |
c6b52c13 | 178 | |
d342571e RV |
179 | config GPIO_ETRAXFS |
180 | bool "Axis ETRAX FS General I/O" | |
181 | depends on CRIS || COMPILE_TEST | |
048c28c9 | 182 | depends on OF_GPIO |
d342571e | 183 | select GPIO_GENERIC |
29b5357d | 184 | select GPIOLIB_IRQCHIP |
d342571e RV |
185 | help |
186 | Say yes here to support the GPIO controller on Axis ETRAX FS SoCs. | |
187 | ||
6596e59e SM |
188 | config GPIO_EXAR |
189 | tristate "Support for GPIO pins on XR17V352/354/358" | |
190 | depends on SERIAL_8250_EXAR | |
191 | help | |
192 | Selecting this option will enable handling of GPIO pins present | |
193 | on Exar XR17V352/354/358 chips. | |
194 | ||
223fa272 LW |
195 | config GPIO_GE_FPGA |
196 | bool "GE FPGA based GPIO" | |
197 | depends on GE_FPGA | |
198 | select GPIO_GENERIC | |
199 | help | |
200 | Support for common GPIO functionality provided on some GE Single Board | |
201 | Computers. | |
202 | ||
203 | This driver provides basic support (configure as input or output, read | |
204 | and write pin state) for GPIO implemented in a number of GE single | |
205 | board computers. | |
206 | ||
49cec4d8 LW |
207 | config GPIO_GEMINI |
208 | bool "Gemini GPIO" | |
209 | depends on ARCH_GEMINI | |
210 | depends on OF_GPIO | |
211 | select GPIO_GENERIC | |
212 | select GPIOLIB_IRQCHIP | |
213 | help | |
214 | Support for common GPIOs found in Cortina systems Gemini platforms. | |
215 | ||
223fa272 LW |
216 | config GPIO_GENERIC_PLATFORM |
217 | tristate "Generic memory-mapped GPIO controller support (MMIO platform device)" | |
218 | select GPIO_GENERIC | |
219 | help | |
220 | Say yes here to support basic platform_device memory-mapped GPIO controllers. | |
221 | ||
222 | config GPIO_GRGPIO | |
223 | tristate "Aeroflex Gaisler GRGPIO support" | |
048c28c9 | 224 | depends on OF_GPIO |
223fa272 LW |
225 | select GPIO_GENERIC |
226 | select IRQ_DOMAIN | |
227 | help | |
228 | Select this to support Aeroflex Gaisler GRGPIO cores from the GRLIB | |
229 | VHDL IP core library. | |
230 | ||
231 | config GPIO_ICH | |
232 | tristate "Intel ICH GPIO" | |
233 | depends on PCI && X86 | |
234 | select MFD_CORE | |
235 | select LPC_ICH | |
236 | help | |
237 | Say yes here to support the GPIO functionality of a number of Intel | |
238 | ICH-based chipsets. Currently supported devices: ICH6, ICH7, ICH8 | |
239 | ICH9, ICH10, Series 5/3400 (eg Ibex Peak), Series 6/C200 (eg | |
240 | Cougar Point), NM10 (Tiger Point), and 3100 (Whitmore Lake). | |
241 | ||
242 | If unsure, say N. | |
243 | ||
244 | config GPIO_IOP | |
245 | tristate "Intel IOP GPIO" | |
6d125412 AS |
246 | depends on ARCH_IOP32X || ARCH_IOP33X || COMPILE_TEST |
247 | select GPIO_GENERIC | |
223fa272 LW |
248 | help |
249 | Say yes here to support the GPIO functionality of a number of Intel | |
250 | IOP32X or IOP33X. | |
251 | ||
252 | If unsure, say N. | |
253 | ||
223fa272 LW |
254 | config GPIO_LOONGSON |
255 | bool "Loongson-2/3 GPIO support" | |
256 | depends on CPU_LOONGSON2 || CPU_LOONGSON3 | |
257 | help | |
258 | driver for GPIO functionality on Loongson-2F/3A/3B processors. | |
259 | ||
13a43fd9 | 260 | config GPIO_LPC18XX |
54b72998 | 261 | tristate "NXP LPC18XX/43XX GPIO support" |
13a43fd9 JE |
262 | default y if ARCH_LPC18XX |
263 | depends on OF_GPIO && (ARCH_LPC18XX || COMPILE_TEST) | |
264 | help | |
265 | Select this option to enable GPIO driver for | |
266 | NXP LPC18XX/43XX devices. | |
267 | ||
223fa272 LW |
268 | config GPIO_LYNXPOINT |
269 | tristate "Intel Lynxpoint GPIO support" | |
270 | depends on ACPI && X86 | |
271 | select GPIOLIB_IRQCHIP | |
272 | help | |
273 | driver for GPIO functionality on Intel Lynxpoint PCH chipset | |
274 | Requires ACPI device enumeration code to set up a platform device. | |
275 | ||
0da094d8 JB |
276 | config GPIO_MB86S7X |
277 | bool "GPIO support for Fujitsu MB86S7x Platforms" | |
4fccbbde | 278 | depends on ARCH_MB86S7X || COMPILE_TEST |
0da094d8 JB |
279 | help |
280 | Say yes here to support the GPIO controller in Fujitsu MB86S70 SoCs. | |
281 | ||
f436bc27 AW |
282 | config GPIO_MENZ127 |
283 | tristate "MEN 16Z127 GPIO support" | |
284 | depends on MCB | |
285 | select GPIO_GENERIC | |
286 | help | |
287 | Say yes here to support the MEN 16Z127 GPIO Controller | |
288 | ||
223fa272 LW |
289 | config GPIO_MM_LANTIQ |
290 | bool "Lantiq Memory mapped GPIOs" | |
291 | depends on LANTIQ && SOC_XWAY | |
292 | help | |
293 | This enables support for memory mapped GPIOs on the External Bus Unit | |
294 | (EBU) found on Lantiq SoCs. The gpios are output only as they are | |
295 | created by attaching a 16bit latch to the bus. | |
296 | ||
0f98dd1b BJZ |
297 | config GPIO_MOCKUP |
298 | tristate "GPIO Testing Driver" | |
0cb94092 | 299 | depends on GPIOLIB && SYSFS |
0f98dd1b | 300 | select GPIO_SYSFS |
e2ff7408 BG |
301 | select GPIOLIB_IRQCHIP |
302 | select IRQ_WORK | |
0f98dd1b BJZ |
303 | help |
304 | This enables GPIO Testing driver, which provides a way to test GPIO | |
305 | subsystem through sysfs(or char device) and debugfs. GPIO_SYSFS | |
306 | must be selected for this test. | |
307 | User could use it through the script in | |
308 | tools/testing/selftests/gpio/gpio-mockup.sh. Reference the usage in | |
309 | it. | |
310 | ||
0299b77b JJ |
311 | config GPIO_MOXART |
312 | bool "MOXART GPIO support" | |
24030d9d | 313 | depends on ARCH_MOXART || COMPILE_TEST |
3c01b9a8 | 314 | select GPIO_GENERIC |
0299b77b JJ |
315 | help |
316 | Select this option to enable GPIO driver for | |
317 | MOXA ART SoC devices. | |
318 | ||
6eae1ace GL |
319 | config GPIO_MPC5200 |
320 | def_bool y | |
321 | depends on PPC_MPC52xx | |
322 | ||
c68308dd | 323 | config GPIO_MPC8XXX |
5df7fd46 | 324 | bool "MPC512x/MPC8xxx/QorIQ GPIO support" |
c68308dd | 325 | depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \ |
5df7fd46 LG |
326 | FSL_SOC_BOOKE || PPC_86xx || ARCH_LAYERSCAPE || ARM || \ |
327 | COMPILE_TEST | |
328 | select GPIO_GENERIC | |
a8fa91a7 | 329 | select IRQ_DOMAIN |
c68308dd WS |
330 | help |
331 | Say Y here if you're going to use hardware that connects to the | |
5df7fd46 | 332 | MPC512x/831x/834x/837x/8572/8610/QorIQ GPIOs. |
c68308dd | 333 | |
fefe7b09 TP |
334 | config GPIO_MVEBU |
335 | def_bool y | |
49e928d6 | 336 | depends on PLAT_ORION |
048c28c9 | 337 | depends on OF_GPIO |
fefe7b09 TP |
338 | select GENERIC_IRQ_CHIP |
339 | ||
d37a65bb SG |
340 | config GPIO_MXC |
341 | def_bool y | |
342 | depends on ARCH_MXC | |
c103de24 | 343 | select GPIO_GENERIC |
e4ea9333 | 344 | select GENERIC_IRQ_CHIP |
c103de24 GL |
345 | |
346 | config GPIO_MXS | |
347 | def_bool y | |
348 | depends on ARCH_MXS | |
06f88a8a | 349 | select GPIO_GENERIC |
498c17cf | 350 | select GENERIC_IRQ_CHIP |
d37a65bb | 351 | |
aca58a66 DD |
352 | config GPIO_OCTEON |
353 | tristate "Cavium OCTEON GPIO" | |
354 | depends on GPIOLIB && CAVIUM_OCTEON_SOC | |
355 | default y | |
356 | help | |
357 | Say yes here to support the on-chip GPIO lines on the OCTEON | |
358 | family of SOCs. | |
359 | ||
cd0a3748 | 360 | config GPIO_OMAP |
cac089f9 | 361 | tristate "TI OMAP GPIO support" if ARCH_OMAP2PLUS || COMPILE_TEST |
cd0a3748 | 362 | default y if ARCH_OMAP |
9d5d96ef AB |
363 | depends on ARM |
364 | select GENERIC_IRQ_CHIP | |
fb655f57 | 365 | select GPIOLIB_IRQCHIP |
cd0a3748 JMC |
366 | help |
367 | Say yes here to enable GPIO support for TI OMAP SoCs. | |
368 | ||
1e9c2859 BS |
369 | config GPIO_PL061 |
370 | bool "PrimeCell PL061 GPIO support" | |
8a242842 | 371 | depends on ARM_AMBA |
a5d6d271 | 372 | select IRQ_DOMAIN |
8d5b24bd | 373 | select GPIOLIB_IRQCHIP |
1e9c2859 BS |
374 | help |
375 | Say yes here to support the PrimeCell PL061 GPIO device | |
376 | ||
157d2644 HZ |
377 | config GPIO_PXA |
378 | bool "PXA GPIO support" | |
379 | depends on ARCH_PXA || ARCH_MMP | |
380 | help | |
381 | Say yes here to support the PXA GPIO device | |
382 | ||
119f5e44 MD |
383 | config GPIO_RCAR |
384 | tristate "Renesas R-Car GPIO" | |
2af66e1d | 385 | depends on ARCH_RENESAS || COMPILE_TEST |
c7f3c5d3 | 386 | select GPIOLIB_IRQCHIP |
119f5e44 MD |
387 | help |
388 | Say yes here to support GPIO on Renesas R-Car SoCs. | |
389 | ||
b53bc281 SH |
390 | config GPIO_SPEAR_SPICS |
391 | bool "ST SPEAr13xx SPI Chip Select as GPIO support" | |
392 | depends on PLAT_SPEAR | |
393 | select GENERIC_IRQ_CHIP | |
394 | help | |
395 | Say yes here to support ST SPEAr SPI Chip Select as GPIO device | |
396 | ||
7b0d44f3 AR |
397 | config GPIO_STA2X11 |
398 | bool "STA2x11/ConneXt GPIO support" | |
399 | depends on MFD_STA2X11 | |
400 | select GENERIC_IRQ_CHIP | |
401 | help | |
402 | Say yes here to support the STA2x11/ConneXt GPIO device. | |
403 | The GPIO module has 128 GPIO pins with alternate functions. | |
404 | ||
be9cab5b LW |
405 | config GPIO_STP_XWAY |
406 | bool "XWAY STP GPIOs" | |
407 | depends on SOC_XWAY | |
408 | help | |
409 | This enables support for the Serial To Parallel (STP) unit found on | |
410 | XWAY SoC. The STP allows the SoC to drive a shift registers cascade, | |
411 | that can be up to 24 bit. This peripheral is aimed at driving leds. | |
412 | Some of the gpios/leds can be auto updated by the soc with dsl and | |
413 | phy status. | |
414 | ||
6a8a0c1d AS |
415 | config GPIO_SYSCON |
416 | tristate "GPIO based on SYSCON" | |
417 | depends on MFD_SYSCON && OF | |
418 | help | |
419 | Say yes here to support GPIO functionality though SYSCON driver. | |
420 | ||
223fa272 LW |
421 | config GPIO_TB10X |
422 | bool | |
423 | select GENERIC_IRQ_CHIP | |
424 | select OF_GPIO | |
425 | ||
4dd4dd1d | 426 | config GPIO_TEGRA |
0bfb85c6 AB |
427 | bool "NVIDIA Tegra GPIO support" |
428 | default ARCH_TEGRA | |
4dd4dd1d | 429 | depends on ARCH_TEGRA || COMPILE_TEST |
048c28c9 | 430 | depends on OF_GPIO |
0bfb85c6 AB |
431 | help |
432 | Say yes here to support GPIO pins on NVIDIA Tegra SoCs. | |
4dd4dd1d | 433 | |
5041e791 JG |
434 | config GPIO_TS4800 |
435 | tristate "TS-4800 DIO blocks and compatibles" | |
436 | depends on OF_GPIO | |
6dcfd729 | 437 | depends on SOC_IMX51 || COMPILE_TEST |
5041e791 JG |
438 | select GPIO_GENERIC |
439 | help | |
440 | This driver support TS-4800 FPGA GPIO controllers. | |
441 | ||
9caf1f22 JH |
442 | config GPIO_TZ1090 |
443 | bool "Toumaz Xenif TZ1090 GPIO support" | |
444 | depends on SOC_TZ1090 | |
04777396 | 445 | select GENERIC_IRQ_CHIP |
9caf1f22 JH |
446 | default y |
447 | help | |
448 | Say yes here to support Toumaz Xenif TZ1090 GPIOs. | |
449 | ||
79bb6460 JH |
450 | config GPIO_TZ1090_PDC |
451 | bool "Toumaz Xenif TZ1090 PDC GPIO support" | |
452 | depends on SOC_TZ1090 | |
453 | default y | |
454 | help | |
455 | Say yes here to support Toumaz Xenif TZ1090 PDC GPIOs. | |
456 | ||
7f2691a1 SA |
457 | config GPIO_VF610 |
458 | def_bool y | |
459 | depends on ARCH_MXC && SOC_VF610 | |
460 | select GPIOLIB_IRQCHIP | |
461 | help | |
462 | Say yes here to support Vybrid vf610 GPIOs. | |
463 | ||
223fa272 LW |
464 | config GPIO_VR41XX |
465 | tristate "NEC VR4100 series General-purpose I/O Uint support" | |
466 | depends on CPU_VR41XX | |
467 | help | |
468 | Say yes here to support the NEC VR4100 series General-purpose I/O Uint | |
469 | ||
470 | config GPIO_VX855 | |
471 | tristate "VIA VX855/VX875 GPIO" | |
72aba2e2 | 472 | depends on (X86 || COMPILE_TEST) && PCI |
223fa272 LW |
473 | select MFD_CORE |
474 | select MFD_VX855 | |
475 | help | |
476 | Support access to the VX855/VX875 GPIO lines through the gpio library. | |
477 | ||
478 | This driver provides common support for accessing the device, | |
479 | additional drivers must be enabled in order to use the | |
480 | functionality of the device. | |
481 | ||
29cbf458 FK |
482 | config GPIO_XGENE |
483 | bool "APM X-Gene GPIO controller support" | |
484 | depends on ARM64 && OF_GPIO | |
485 | help | |
486 | This driver is to support the GPIO block within the APM X-Gene SoC | |
487 | platform's generic flash controller. The GPIO pins are muxed with | |
488 | the generic flash controller's address and data pins. Say yes | |
489 | here to enable the GFC GPIO functionality. | |
490 | ||
b2b35e10 V |
491 | config GPIO_XGENE_SB |
492 | tristate "APM X-Gene GPIO standby controller support" | |
493 | depends on ARCH_XGENE && OF_GPIO | |
494 | select GPIO_GENERIC | |
e5f7e312 | 495 | select GPIOLIB_IRQCHIP |
b2b35e10 V |
496 | help |
497 | This driver supports the GPIO block within the APM X-Gene | |
498 | Standby Domain. Say yes here to enable the GPIO functionality. | |
499 | ||
0bcb6069 | 500 | config GPIO_XILINX |
c54c58ba | 501 | tristate "Xilinx GPIO support" |
79786721 | 502 | depends on OF_GPIO |
0bcb6069 JL |
503 | help |
504 | Say yes here to support the Xilinx FPGA GPIO device | |
505 | ||
ff718800 KP |
506 | config GPIO_XLP |
507 | tristate "Netlogic XLP GPIO support" | |
dd98756d | 508 | depends on OF_GPIO && (CPU_XLP || ARCH_VULCAN || COMPILE_TEST) |
ff718800 KP |
509 | select GPIOLIB_IRQCHIP |
510 | help | |
511 | This driver provides support for GPIO interface on Netlogic XLP MIPS64 | |
512 | SoCs. Currently supported XLP variants are XLP8XX, XLP3XX, XLP2XX, | |
513 | XLP9XX and XLP5XX. | |
514 | ||
515 | If unsure, say N. | |
516 | ||
3b31d0ec BS |
517 | config GPIO_XTENSA |
518 | bool "Xtensa GPIO32 support" | |
519 | depends on XTENSA | |
a1a2bdec | 520 | depends on HAVE_XTENSA_GPIO32 |
3b31d0ec BS |
521 | depends on !SMP |
522 | help | |
523 | Say yes here to support the Xtensa internal GPIO32 IMPWIRE (input) | |
524 | and EXPSTATE (output) ports | |
525 | ||
223fa272 LW |
526 | config GPIO_ZEVIO |
527 | bool "LSI ZEVIO SoC memory mapped GPIOs" | |
528 | depends on ARM && OF_GPIO | |
27fdd325 | 529 | help |
223fa272 | 530 | Say yes here to support the GPIO controller in LSI ZEVIO SoCs. |
27fdd325 | 531 | |
223fa272 LW |
532 | config GPIO_ZYNQ |
533 | tristate "Xilinx Zynq GPIO support" | |
bdf7a4ae | 534 | depends on ARCH_ZYNQ || ARCH_ZYNQMP |
7f87210e | 535 | select GPIOLIB_IRQCHIP |
be9b06b2 | 536 | help |
223fa272 | 537 | Say yes here to support Xilinx Zynq GPIO controller. |
92021490 | 538 | |
0963670a LW |
539 | config GPIO_ZX |
540 | bool "ZTE ZX GPIO support" | |
752fda89 | 541 | depends on ARCH_ZX || COMPILE_TEST |
0963670a LW |
542 | select GPIOLIB_IRQCHIP |
543 | help | |
544 | Say yes here to support the GPIO device on ZTE ZX SoCs. | |
545 | ||
bd37c999 KC |
546 | config GPIO_LOONGSON1 |
547 | tristate "Loongson1 GPIO support" | |
548 | depends on MACH_LOONGSON32 | |
549 | select GPIO_GENERIC | |
550 | help | |
551 | Say Y or M here to support GPIO on Loongson1 SoCs. | |
552 | ||
177b0381 | 553 | endmenu |
be9b06b2 | 554 | |
bc6a73bb | 555 | menu "Port-mapped I/O GPIO drivers" |
7768feb0 | 556 | depends on X86 # Unconditional I/O space access |
bc6a73bb | 557 | |
1b06d64f WBG |
558 | config GPIO_104_DIO_48E |
559 | tristate "ACCES 104-DIO-48E GPIO support" | |
f4ae9169 | 560 | depends on ISA_BUS_API |
1b06d64f WBG |
561 | select GPIOLIB_IRQCHIP |
562 | help | |
4c23db0f WBG |
563 | Enables GPIO support for the ACCES 104-DIO-48E series (104-DIO-48E, |
564 | 104-DIO-24E). The base port addresses for the devices may be | |
565 | configured via the base module parameter. The interrupt line numbers | |
566 | for the devices may be configured via the irq module parameter. | |
1b06d64f | 567 | |
bc6a73bb LW |
568 | config GPIO_104_IDIO_16 |
569 | tristate "ACCES 104-IDIO-16 GPIO support" | |
f4ae9169 | 570 | depends on ISA_BUS_API |
a1184147 | 571 | select GPIOLIB_IRQCHIP |
bc6a73bb | 572 | help |
86ea8a95 WBG |
573 | Enables GPIO support for the ACCES 104-IDIO-16 family (104-IDIO-16, |
574 | 104-IDIO-16E, 104-IDO-16, 104-IDIO-8, 104-IDIO-8E, 104-IDO-8). The | |
575 | base port addresses for the devices may be configured via the base | |
576 | module parameter. The interrupt line numbers for the devices may be | |
577 | configured via the irq module parameter. | |
bc6a73bb | 578 | |
6ddcf9b4 WBG |
579 | config GPIO_104_IDI_48 |
580 | tristate "ACCES 104-IDI-48 GPIO support" | |
f4ae9169 | 581 | depends on ISA_BUS_API |
6ddcf9b4 WBG |
582 | select GPIOLIB_IRQCHIP |
583 | help | |
72bf7443 WBG |
584 | Enables GPIO support for the ACCES 104-IDI-48 family (104-IDI-48A, |
585 | 104-IDI-48AC, 104-IDI-48B, 104-IDI-48BC). The base port addresses for | |
586 | the devices may be configured via the base module parameter. The | |
587 | interrupt line numbers for the devices may be configured via the irq | |
588 | module parameter. | |
6ddcf9b4 | 589 | |
bc6a73bb | 590 | config GPIO_F7188X |
1920906f | 591 | tristate "F71869, F71869A, F71882FG, F71889F and F81866 GPIO support" |
bc6a73bb LW |
592 | help |
593 | This option enables support for GPIOs found on Fintek Super-I/O | |
1920906f | 594 | chips F71869, F71869A, F71882FG, F71889F and F81866. |
bc6a73bb LW |
595 | |
596 | To compile this driver as a module, choose M here: the module will | |
597 | be called f7188x-gpio. | |
598 | ||
6ea5dcdf WBG |
599 | config GPIO_GPIO_MM |
600 | tristate "Diamond Systems GPIO-MM GPIO support" | |
601 | depends on ISA_BUS_API | |
602 | help | |
603 | Enables GPIO support for the Diamond Systems GPIO-MM and GPIO-MM-12. | |
604 | ||
605 | The Diamond Systems GPIO-MM device features 48 lines of digital I/O | |
606 | via the emulation of dual 82C55A PPI chips. This driver provides GPIO | |
607 | support for these 48 channels of digital I/O. | |
608 | ||
609 | The base port addresses for the devices may be configured via the base | |
610 | array module parameter. | |
611 | ||
bc6a73bb LW |
612 | config GPIO_IT87 |
613 | tristate "IT87xx GPIO support" | |
bc6a73bb LW |
614 | help |
615 | Say yes here to support GPIO functionality of IT87xx Super I/O chips. | |
616 | ||
617 | This driver is tested with ITE IT8728 and IT8732 Super I/O chips, and | |
8fccdb58 | 618 | supports the IT8761E, IT8620E and IT8628E Super I/O chip as well. |
bc6a73bb LW |
619 | |
620 | To compile this driver as a module, choose M here: the module will | |
621 | be called gpio_it87 | |
622 | ||
623 | config GPIO_SCH | |
624 | tristate "Intel SCH/TunnelCreek/Centerton/Quark X1000 GPIO" | |
72aba2e2 | 625 | depends on (X86 || COMPILE_TEST) && PCI |
bc6a73bb LW |
626 | select MFD_CORE |
627 | select LPC_SCH | |
628 | help | |
629 | Say yes here to support GPIO interface on Intel Poulsbo SCH, | |
630 | Intel Tunnel Creek processor, Intel Centerton processor or | |
631 | Intel Quark X1000 SoC. | |
632 | ||
633 | The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are | |
634 | powered by the core power rail and are turned off during sleep | |
635 | modes (S3 and higher). The remaining four GPIOs are powered by | |
636 | the Intel SCH suspend power supply. These GPIOs remain | |
637 | active during S3. The suspend powered GPIOs can be used to wake the | |
638 | system from the Suspend-to-RAM state. | |
639 | ||
640 | The Intel Tunnel Creek processor has 5 GPIOs powered by the | |
641 | core power rail and 9 from suspend power supply. | |
642 | ||
643 | The Intel Centerton processor has a total of 30 GPIO pins. | |
644 | Twenty-one are powered by the core power rail and 9 from the | |
645 | suspend power supply. | |
646 | ||
647 | The Intel Quark X1000 SoC has 2 GPIOs powered by the core | |
648 | power well and 6 from the suspend power well. | |
649 | ||
650 | config GPIO_SCH311X | |
651 | tristate "SMSC SCH311x SuperI/O GPIO" | |
652 | help | |
653 | Driver to enable the GPIOs found on SMSC SMSC SCH3112, SCH3114 and | |
654 | SCH3116 "Super I/O" chipsets. | |
655 | ||
656 | To compile this driver as a module, choose M here: the module will | |
657 | be called gpio-sch311x. | |
658 | ||
659 | config GPIO_TS5500 | |
660 | tristate "TS-5500 DIO blocks and compatibles" | |
661 | depends on TS5500 || COMPILE_TEST | |
662 | help | |
663 | This driver supports Digital I/O exposed by pin blocks found on some | |
664 | Technologic Systems platforms. It includes, but is not limited to, 3 | |
665 | blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600 | |
666 | LCD port. | |
667 | ||
9c26df9b WBG |
668 | config GPIO_WS16C48 |
669 | tristate "WinSystems WS16C48 GPIO support" | |
f4ae9169 | 670 | depends on ISA_BUS_API |
9c26df9b WBG |
671 | select GPIOLIB_IRQCHIP |
672 | help | |
cc736607 WBG |
673 | Enables GPIO support for the WinSystems WS16C48. The base port |
674 | addresses for the devices may be configured via the base module | |
675 | parameter. The interrupt line numbers for the devices may be | |
676 | configured via the irq module parameter. | |
9c26df9b | 677 | |
bc6a73bb LW |
678 | endmenu |
679 | ||
177b0381 LW |
680 | menu "I2C GPIO expanders" |
681 | depends on I2C | |
92021490 | 682 | |
bf5a16ba LW |
683 | config GPIO_ADP5588 |
684 | tristate "ADP5588 I2C GPIO expander" | |
6ed9f9c4 | 685 | help |
bf5a16ba LW |
686 | This option enables support for 18 GPIOs found |
687 | on Analog Devices ADP5588 GPIO Expanders. | |
be9b06b2 | 688 | |
bf5a16ba LW |
689 | config GPIO_ADP5588_IRQ |
690 | bool "Interrupt controller support for ADP5588" | |
691 | depends on GPIO_ADP5588=y | |
e9004f50 | 692 | help |
bf5a16ba LW |
693 | Say yes here to enable the adp5588 to be used as an interrupt |
694 | controller. It requires the driver to be built in the kernel. | |
31ba56f2 | 695 | |
bf5a16ba LW |
696 | config GPIO_ADNP |
697 | tristate "Avionic Design N-bit GPIO expander" | |
269a46f8 | 698 | depends on OF_GPIO |
104fb1d5 ZL |
699 | select GPIOLIB_IRQCHIP |
700 | help | |
bf5a16ba LW |
701 | This option enables support for N GPIOs found on Avionic Design |
702 | I2C GPIO expanders. The register space will be extended by powers | |
703 | of two, so the controller will need to accommodate for that. For | |
704 | example: if a controller provides 48 pins, 6 registers will be | |
705 | enough to represent all pins, but the driver will assume a | |
706 | register layout for 64 pins (8 registers). | |
0cc59b9d | 707 | |
e952805d WS |
708 | config GPIO_MAX7300 |
709 | tristate "Maxim MAX7300 GPIO expander" | |
e952805d WS |
710 | select GPIO_MAX730X |
711 | help | |
2b861f4b | 712 | GPIO driver for Maxim MAX7300 I2C-based GPIO expander. |
e952805d | 713 | |
bbcd6d54 EM |
714 | config GPIO_MAX732X |
715 | tristate "MAX7319, MAX7320-7327 I2C Port Expanders" | |
bbcd6d54 EM |
716 | help |
717 | Say yes here to support the MAX7319, MAX7320-7327 series of I2C | |
718 | Port Expanders. Each IO port on these chips has a fixed role of | |
719 | Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain | |
720 | Input and Output (designed by 'P'). The combinations are listed | |
721 | below: | |
722 | ||
723 | 8 bits: max7319 (8I), max7320 (8O), max7321 (8P), | |
724 | max7322 (4I4O), max7323 (4P4O) | |
725 | ||
726 | 16 bits: max7324 (8I8O), max7325 (8P8O), | |
727 | max7326 (4I12O), max7327 (4P12O) | |
728 | ||
729 | Board setup code must specify the model to use, and the start | |
730 | number for these GPIOs. | |
731 | ||
a80a0bbe MZ |
732 | config GPIO_MAX732X_IRQ |
733 | bool "Interrupt controller support for MAX732x" | |
0244ad00 | 734 | depends on GPIO_MAX732X=y |
984f6643 | 735 | select GPIOLIB_IRQCHIP |
a80a0bbe MZ |
736 | help |
737 | Say yes here to enable the max732x to be used as an interrupt | |
738 | controller. It requires the driver to be built in the kernel. | |
739 | ||
608589b1 | 740 | config GPIO_MC9S08DZ60 |
741 | bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions" | |
4c30aa33 | 742 | depends on I2C=y && MACH_MX35_3DS |
608589b1 | 743 | help |
744 | Select this to enable the MC9S08DZ60 GPIO driver | |
745 | ||
f3dc3630 | 746 | config GPIO_PCA953X |
eb32b5aa | 747 | tristate "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports" |
9e60fdcf | 748 | help |
7059d4b0 DB |
749 | Say yes here to provide access to several register-oriented |
750 | SMBus I/O expanders, made mostly by NXP or TI. Compatible | |
751 | models include: | |
752 | ||
753 | 4 bits: pca9536, pca9537 | |
754 | ||
c29985dd | 755 | 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554, |
e73760a6 | 756 | pca9556, pca9557, pca9574, tca6408, xra1202 |
7059d4b0 | 757 | |
c29985dd AL |
758 | 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575, |
759 | tca6416 | |
9e60fdcf | 760 | |
1e191695 AS |
761 | 24 bits: tca6424 |
762 | ||
eb32b5aa | 763 | 40 bits: pca9505, pca9698 |
1e191695 | 764 | |
89ea8bbe MZ |
765 | config GPIO_PCA953X_IRQ |
766 | bool "Interrupt controller support for PCA953x" | |
767 | depends on GPIO_PCA953X=y | |
7bcbce55 | 768 | select GPIOLIB_IRQCHIP |
89ea8bbe MZ |
769 | help |
770 | Say yes here to enable the pca953x to be used as an interrupt | |
771 | controller. It requires the driver to be built in the kernel. | |
772 | ||
15fae37d | 773 | config GPIO_PCF857X |
1673ad52 | 774 | tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders" |
a39294bd | 775 | select GPIOLIB_IRQCHIP |
901acf5b | 776 | select IRQ_DOMAIN |
15fae37d DB |
777 | help |
778 | Say yes here to provide access to most "quasi-bidirectional" I2C | |
779 | GPIO expanders used for additional digital outputs or inputs. | |
780 | Most of these parts are from NXP, though TI is a second source for | |
781 | some of them. Compatible models include: | |
782 | ||
783 | 8 bits: pcf8574, pcf8574a, pca8574, pca8574a, | |
1673ad52 DB |
784 | pca9670, pca9672, pca9674, pca9674a, |
785 | max7328, max7329 | |
15fae37d DB |
786 | |
787 | 16 bits: pcf8575, pcf8575c, pca8575, | |
788 | pca9671, pca9673, pca9675 | |
789 | ||
790 | Your board setup code will need to declare the expanders in | |
791 | use, and assign numbers to the GPIOs they expose. Those GPIOs | |
792 | can then be used from drivers and other kernel code, just like | |
793 | other GPIOs, but only accessible from task contexts. | |
794 | ||
795 | This driver provides an in-kernel interface to those GPIOs using | |
796 | platform-neutral GPIO calls. | |
797 | ||
c34f16b7 | 798 | config GPIO_SX150X |
9e80f906 NA |
799 | bool "Semtech SX150x I2C GPIO expander (deprecated)" |
800 | depends on PINCTRL && I2C=y | |
801 | select PINCTRL_SX150X | |
c34f16b7 GB |
802 | default n |
803 | help | |
9e80f906 NA |
804 | Say yes here to provide support for Semtech SX150x-series I2C |
805 | GPIO expanders. The GPIO driver was replaced by a Pinctrl version. | |
c34f16b7 | 806 | |
b866526d AD |
807 | config GPIO_TPIC2810 |
808 | tristate "TPIC2810 8-Bit I2C GPO expander" | |
809 | help | |
810 | Say yes here to enable the GPO driver for the TI TPIC2810 chip. | |
811 | ||
812 | To compile this driver as a module, choose M here: the module will | |
813 | be called gpio-tpic2810. | |
814 | ||
9c668632 LQ |
815 | config GPIO_TS4900 |
816 | tristate "Technologic Systems FPGA I2C GPIO" | |
4c5f15b7 | 817 | depends on SOC_IMX6 || COMPILE_TEST |
9c668632 LQ |
818 | select REGMAP_I2C |
819 | help | |
820 | Say yes here to enabled the GPIO driver for Technologic's FPGA core. | |
821 | Series supported include TS-4100, TS-4900, TS-7970 and TS-7990. | |
822 | ||
177b0381 LW |
823 | endmenu |
824 | ||
825 | menu "MFD GPIO expanders" | |
be9cab5b LW |
826 | |
827 | config GPIO_ADP5520 | |
828 | tristate "GPIO Support for ADP5520 PMIC" | |
829 | depends on PMIC_ADP5520 | |
830 | help | |
831 | This option enables support for on-chip GPIO found | |
832 | on Analog Devices ADP5520 PMICs. | |
833 | ||
26a48c4c TT |
834 | config GPIO_ALTERA_A10SR |
835 | tristate "Altera Arria10 System Resource GPIO" | |
836 | depends on MFD_ALTERA_A10SR | |
837 | help | |
838 | Driver for Arria10 Development Kit GPIO expansion which | |
839 | includes reads of pushbuttons and DIP switches as well | |
840 | as writes to LEDs. | |
841 | ||
be9cab5b LW |
842 | config GPIO_ARIZONA |
843 | tristate "Wolfson Microelectronics Arizona class devices" | |
844 | depends on MFD_ARIZONA | |
845 | help | |
846 | Support for GPIOs on Wolfson Arizona class devices. | |
847 | ||
848 | config GPIO_CRYSTAL_COVE | |
849 | tristate "GPIO support for Crystal Cove PMIC" | |
72aba2e2 | 850 | depends on (X86 || COMPILE_TEST) && INTEL_SOC_PMIC |
be9cab5b LW |
851 | select GPIOLIB_IRQCHIP |
852 | help | |
853 | Support for GPIO pins on Crystal Cove PMIC. | |
854 | ||
855 | Say Yes if you have a Intel SoC based tablet with Crystal Cove PMIC | |
856 | inside. | |
857 | ||
858 | This driver can also be built as a module. If so, the module will be | |
859 | called gpio-crystalcove. | |
860 | ||
861 | config GPIO_CS5535 | |
862 | tristate "AMD CS5535/CS5536 GPIO support" | |
72aba2e2 | 863 | depends on X86 || MIPS || COMPILE_TEST |
be9cab5b LW |
864 | depends on MFD_CS5535 |
865 | help | |
866 | The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that | |
867 | can be used for quite a number of things. The CS5535/6 is found on | |
868 | AMD Geode and Lemote Yeeloong devices. | |
869 | ||
870 | If unsure, say N. | |
871 | ||
872 | config GPIO_DA9052 | |
873 | tristate "Dialog DA9052 GPIO" | |
874 | depends on PMIC_DA9052 | |
875 | help | |
876 | Say yes here to enable the GPIO driver for the DA9052 chip. | |
877 | ||
878 | config GPIO_DA9055 | |
879 | tristate "Dialog Semiconductor DA9055 GPIO" | |
880 | depends on MFD_DA9055 | |
881 | help | |
882 | Say yes here to enable the GPIO driver for the DA9055 chip. | |
883 | ||
884 | The Dialog DA9055 PMIC chip has 3 GPIO pins that can be | |
885 | be controller by this driver. | |
886 | ||
887 | If driver is built as a module it will be called gpio-da9055. | |
888 | ||
889 | config GPIO_DLN2 | |
890 | tristate "Diolan DLN2 GPIO support" | |
891 | depends on MFD_DLN2 | |
892 | select GPIOLIB_IRQCHIP | |
893 | ||
894 | help | |
895 | Select this option to enable GPIO driver for the Diolan DLN2 | |
896 | board. | |
897 | ||
898 | This driver can also be built as a module. If so, the module | |
899 | will be called gpio-dln2. | |
900 | ||
3c6e8d05 LW |
901 | config HTC_EGPIO |
902 | bool "HTC EGPIO support" | |
903 | depends on GPIOLIB && ARM | |
904 | help | |
905 | This driver supports the CPLD egpio chip present on | |
906 | several HTC phones. It provides basic support for input | |
907 | pins, output pins, and irqs. | |
908 | ||
be9cab5b LW |
909 | config GPIO_JANZ_TTL |
910 | tristate "Janz VMOD-TTL Digital IO Module" | |
911 | depends on MFD_JANZ_CMODIO | |
912 | help | |
913 | This enables support for the Janz VMOD-TTL Digital IO module. | |
914 | This driver provides support for driving the pins in output | |
915 | mode only. Input mode is not supported. | |
916 | ||
917 | config GPIO_KEMPLD | |
918 | tristate "Kontron ETX / COMexpress GPIO" | |
919 | depends on MFD_KEMPLD | |
920 | help | |
921 | This enables support for the PLD GPIO interface on some Kontron ETX | |
922 | and COMexpress (ETXexpress) modules. | |
923 | ||
924 | This driver can also be built as a module. If so, the module will be | |
925 | called gpio-kempld. | |
926 | ||
927 | config GPIO_LP3943 | |
928 | tristate "TI/National Semiconductor LP3943 GPIO expander" | |
929 | depends on MFD_LP3943 | |
930 | help | |
931 | GPIO driver for LP3943 MFD. | |
932 | LP3943 can be used as a GPIO expander which provides up to 16 GPIOs. | |
933 | Open drain outputs are required for this usage. | |
934 | ||
83f14103 K |
935 | config GPIO_LP873X |
936 | tristate "TI LP873X GPO" | |
937 | depends on MFD_TI_LP873X | |
938 | help | |
939 | This driver supports the GPO on TI Lp873x PMICs. 2 GPOs are present | |
940 | on LP873X PMICs. | |
941 | ||
942 | This driver can also be built as a module. If so, the module will be | |
943 | called gpio-lp873x. | |
944 | ||
02c5ba1e LD |
945 | config GPIO_MAX77620 |
946 | tristate "GPIO support for PMIC MAX77620 and MAX20024" | |
947 | depends on MFD_MAX77620 | |
948 | help | |
949 | GPIO driver for MAX77620 and MAX20024 PMIC from Maxim Semiconductor. | |
950 | MAX77620 PMIC has 8 pins that can be configured as GPIOs. The | |
951 | driver also provides interrupt support for each of the gpios. | |
952 | Say yes here to enable the max77620 to be used as gpio controller. | |
953 | ||
be9cab5b LW |
954 | config GPIO_MSIC |
955 | bool "Intel MSIC mixed signal gpio support" | |
72aba2e2 | 956 | depends on (X86 || COMPILE_TEST) && MFD_INTEL_MSIC |
be9cab5b LW |
957 | help |
958 | Enable support for GPIO on intel MSIC controllers found in | |
959 | intel MID devices | |
960 | ||
961 | config GPIO_PALMAS | |
962 | bool "TI PALMAS series PMICs GPIO" | |
963 | depends on MFD_PALMAS | |
964 | help | |
965 | Select this option to enable GPIO driver for the TI PALMAS | |
966 | series chip family. | |
967 | ||
e9fe32bc LD |
968 | config GPIO_RC5T583 |
969 | bool "RICOH RC5T583 GPIO" | |
970 | depends on MFD_RC5T583 | |
971 | help | |
972 | Select this option to enable GPIO driver for the Ricoh RC5T583 | |
973 | chip family. | |
974 | This driver provides the support for driving/reading the gpio pins | |
975 | of RC5T583 device through standard gpio library. | |
976 | ||
03f822f5 RV |
977 | config GPIO_STMPE |
978 | bool "STMPE GPIOs" | |
979 | depends on MFD_STMPE | |
1dfb4a0d | 980 | depends on OF_GPIO |
fe44e70d | 981 | select GPIOLIB_IRQCHIP |
03f822f5 RV |
982 | help |
983 | This enables support for the GPIOs found on the STMPE I/O | |
984 | Expanders. | |
985 | ||
f4e8afdc SI |
986 | config GPIO_TC3589X |
987 | bool "TC3589X GPIOs" | |
988 | depends on MFD_TC3589X | |
1422731d | 989 | depends on OF_GPIO |
cf42f1cf | 990 | select GPIOLIB_IRQCHIP |
d88b25be | 991 | help |
f4e8afdc | 992 | This enables support for the GPIOs found on the TC3589X |
d88b25be RV |
993 | I/O Expander. |
994 | ||
be9cab5b LW |
995 | config GPIO_TIMBERDALE |
996 | bool "Support for timberdale GPIO IP" | |
997 | depends on MFD_TIMBERDALE | |
998 | ---help--- | |
999 | Add support for the GPIO IP in the timberdale FPGA. | |
1000 | ||
99f0fd54 AD |
1001 | config GPIO_TPS65086 |
1002 | tristate "TI TPS65086 GPO" | |
1003 | depends on MFD_TPS65086 | |
1004 | help | |
1005 | This driver supports the GPO on TI TPS65086x PMICs. | |
1006 | ||
c366c76a NSJ |
1007 | config GPIO_TPS65218 |
1008 | tristate "TPS65218 GPIO" | |
1009 | depends on MFD_TPS65218 | |
1010 | help | |
1011 | Select this option to enable GPIO driver for the TPS65218 | |
1012 | chip family. | |
1013 | ||
be9cab5b LW |
1014 | config GPIO_TPS6586X |
1015 | bool "TPS6586X GPIO" | |
1016 | depends on MFD_TPS6586X | |
1017 | help | |
1018 | Select this option to enable GPIO driver for the TPS6586X | |
1019 | chip family. | |
1020 | ||
1021 | config GPIO_TPS65910 | |
1022 | bool "TPS65910 GPIO" | |
1023 | depends on MFD_TPS65910 | |
1024 | help | |
1025 | Select this option to enable GPIO driver for the TPS65910 | |
1026 | chip family. | |
1027 | ||
668a6cc7 MO |
1028 | config GPIO_TPS65912 |
1029 | tristate "TI TPS65912 GPIO" | |
ca801a22 | 1030 | depends on MFD_TPS65912 |
668a6cc7 MO |
1031 | help |
1032 | This driver supports TPS65912 gpio chip | |
1033 | ||
e9d35947 DB |
1034 | config GPIO_TWL4030 |
1035 | tristate "TWL4030, TWL5030, and TPS659x0 GPIOs" | |
1036 | depends on TWL4030_CORE | |
1037 | help | |
1038 | Say yes here to access the GPIO signals of various multi-function | |
1039 | power management chips from Texas Instruments. | |
1040 | ||
70ffd691 PU |
1041 | config GPIO_TWL6040 |
1042 | tristate "TWL6040 GPO" | |
1043 | depends on TWL6040_CORE | |
1044 | help | |
1045 | Say yes here to access the GPO signals of twl6040 | |
1046 | audio chip from Texas Instruments. | |
1047 | ||
be9cab5b LW |
1048 | config GPIO_UCB1400 |
1049 | tristate "Philips UCB1400 GPIO" | |
1050 | depends on UCB1400_CORE | |
1051 | help | |
1052 | This enables support for the Philips UCB1400 GPIO pins. | |
1053 | The UCB1400 is an AC97 audio codec. | |
1054 | ||
0ba19cfc BG |
1055 | config GPIO_WHISKEY_COVE |
1056 | tristate "GPIO support for Whiskey Cove PMIC" | |
72aba2e2 | 1057 | depends on (X86 || COMPILE_TEST) && INTEL_SOC_PMIC |
0ba19cfc BG |
1058 | select GPIOLIB_IRQCHIP |
1059 | help | |
1060 | Support for GPIO pins on Whiskey Cove PMIC. | |
1061 | ||
1062 | Say Yes if you have a Intel SoC based tablet with Whiskey Cove PMIC | |
1063 | inside. | |
1064 | ||
1065 | This driver can also be built as a module. If so, the module will be | |
1066 | called gpio-wcove. | |
1067 | ||
e4b736f1 MB |
1068 | config GPIO_WM831X |
1069 | tristate "WM831x GPIOs" | |
1070 | depends on MFD_WM831X | |
1071 | help | |
1072 | Say yes here to access the GPIO signals of WM831x power management | |
1073 | chips from Wolfson Microelectronics. | |
1074 | ||
38f6ce45 MB |
1075 | config GPIO_WM8350 |
1076 | tristate "WM8350 GPIOs" | |
1077 | depends on MFD_WM8350 | |
1078 | help | |
1079 | Say yes here to access the GPIO signals of WM8350 power management | |
1080 | chips from Wolfson Microelectronics. | |
1081 | ||
2955c309 MB |
1082 | config GPIO_WM8994 |
1083 | tristate "WM8994 GPIOs" | |
1084 | depends on MFD_WM8994 | |
1085 | help | |
1086 | Say yes here to access the GPIO signals of WM8994 audio hub | |
1087 | CODECs from Wolfson Microelectronics. | |
1088 | ||
177b0381 | 1089 | endmenu |
ef72af40 | 1090 | |
177b0381 LW |
1091 | menu "PCI GPIO expanders" |
1092 | depends on PCI | |
459773ae | 1093 | |
92c33ef7 LW |
1094 | config GPIO_AMD8111 |
1095 | tristate "AMD 8111 GPIO driver" | |
72aba2e2 | 1096 | depends on X86 || COMPILE_TEST |
5e969a40 | 1097 | help |
92c33ef7 | 1098 | The AMD 8111 south bridge contains 32 GPIO pins which can be used. |
ff1d5c2f | 1099 | |
92c33ef7 LW |
1100 | Note, that usually system firmware/ACPI handles GPIO pins on their |
1101 | own and users might easily break their systems with uncarefull usage | |
1102 | of this driver! | |
5f0a96b0 | 1103 | |
92c33ef7 | 1104 | If unsure, say N |
5f0a96b0 | 1105 | |
ff1d5c2f MB |
1106 | config GPIO_BT8XX |
1107 | tristate "BT8XX GPIO abuser" | |
03744529 | 1108 | depends on VIDEO_BT848=n |
ff1d5c2f | 1109 | help |
22520edc | 1110 | The BT8xx frame grabber chip has 24 GPIO pins that can be abused |
ff1d5c2f MB |
1111 | as a cheap PCI GPIO card. |
1112 | ||
1113 | This chip can be found on Miro, Hauppauge and STB TV-cards. | |
1114 | ||
1115 | The card needs to be physically altered for using it as a | |
1116 | GPIO card. For more information on how to build a GPIO card | |
1117 | from a BT8xx TV card, see the documentation file at | |
1118 | Documentation/bt8xxgpio.txt | |
1119 | ||
1120 | If unsure, say N. | |
1121 | ||
84743ea3 | 1122 | config GPIO_INTEL_MID |
c78e3cf1 AS |
1123 | bool "Intel MID GPIO support" |
1124 | depends on X86_INTEL_MID | |
fc346270 | 1125 | select GPIOLIB_IRQCHIP |
8bf02617 | 1126 | help |
c78e3cf1 | 1127 | Say Y here to support Intel MID GPIO. |
8bf02617 | 1128 | |
ccf6fd6d AS |
1129 | config GPIO_MERRIFIELD |
1130 | tristate "Intel Merrifield GPIO support" | |
1131 | depends on X86_INTEL_MID | |
fc346270 | 1132 | select GPIOLIB_IRQCHIP |
8bf02617 | 1133 | help |
ccf6fd6d | 1134 | Say Y here to support Intel Merrifield GPIO. |
8bf02617 | 1135 | |
92c33ef7 LW |
1136 | config GPIO_ML_IOH |
1137 | tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support" | |
72aba2e2 | 1138 | depends on X86 || COMPILE_TEST |
92c33ef7 LW |
1139 | select GENERIC_IRQ_CHIP |
1140 | help | |
1141 | ML7213 is companion chip for Intel Atom E6xx series. | |
1142 | This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output | |
1143 | Hub) which is for IVI(In-Vehicle Infotainment) use. | |
1144 | This driver can access the IOH's GPIO device. | |
1145 | ||
04c17aa8 | 1146 | config GPIO_PCH |
868fea05 | 1147 | tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO" |
03744529 | 1148 | depends on X86_32 || MIPS || COMPILE_TEST |
38eb18a6 | 1149 | select GENERIC_IRQ_CHIP |
04c17aa8 TM |
1150 | help |
1151 | This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff | |
1152 | which is an IOH(Input/Output Hub) for x86 embedded processor. | |
1153 | This driver can access PCH GPIO device. | |
1154 | ||
868fea05 TM |
1155 | This driver also can be used for LAPIS Semiconductor IOH(Input/ |
1156 | Output Hub), ML7223 and ML7831. | |
bc786cce | 1157 | ML7223 IOH is for MP(Media Phone) use. |
868fea05 TM |
1158 | ML7831 IOH is for general purpose use. |
1159 | ML7223/ML7831 is companion chip for Intel Atom E6xx series. | |
1160 | ML7223/ML7831 is completely compatible for Intel EG20T PCH. | |
bc786cce | 1161 | |
02e74fc0 WBG |
1162 | config GPIO_PCI_IDIO_16 |
1163 | tristate "ACCES PCI-IDIO-16 GPIO support" | |
1164 | select GPIOLIB_IRQCHIP | |
1165 | help | |
1166 | Enables GPIO support for the ACCES PCI-IDIO-16. An interrupt is | |
1167 | generated when any of the inputs change state (low to high or high to | |
1168 | low). Input filter control is not supported by this driver, and the | |
1169 | input filters are deactivated by this driver. | |
1170 | ||
92c33ef7 LW |
1171 | config GPIO_RDC321X |
1172 | tristate "RDC R-321x GPIO support" | |
92c33ef7 LW |
1173 | select MFD_CORE |
1174 | select MFD_RDC321X | |
49a36793 | 1175 | help |
92c33ef7 LW |
1176 | Support for the RDC R321x SoC GPIOs over southbridge |
1177 | PCI configuration space. | |
49a36793 | 1178 | |
b43ab901 SAS |
1179 | config GPIO_SODAVILLE |
1180 | bool "Intel Sodaville GPIO support" | |
03744529 | 1181 | depends on X86 && OF |
b43ab901 SAS |
1182 | select GPIO_GENERIC |
1183 | select GENERIC_IRQ_CHIP | |
1184 | help | |
1185 | Say Y here to support Intel Sodaville GPIO. | |
1186 | ||
177b0381 | 1187 | endmenu |
35570ac6 | 1188 | |
177b0381 LW |
1189 | menu "SPI GPIO expanders" |
1190 | depends on SPI_MASTER | |
9956d02d | 1191 | |
a7ec2e7f LW |
1192 | config GPIO_74X164 |
1193 | tristate "74x164 serial-in/parallel-out 8-bits shift register" | |
048c28c9 | 1194 | depends on OF_GPIO |
a7ec2e7f LW |
1195 | help |
1196 | Driver for 74x164 compatible serial-in/parallel-out 8-outputs | |
1197 | shift registers. This driver can be used to provide access | |
1198 | to more gpio outputs. | |
a9c5fff5 | 1199 | |
0c36ec31 JB |
1200 | config GPIO_MAX7301 |
1201 | tristate "Maxim MAX7301 GPIO expander" | |
e952805d | 1202 | select GPIO_MAX730X |
0c36ec31 | 1203 | help |
e952805d | 1204 | GPIO driver for Maxim MAX7301 SPI-based GPIO expander. |
0c36ec31 | 1205 | |
1e5db006 RR |
1206 | config GPIO_MC33880 |
1207 | tristate "Freescale MC33880 high-side/low-side switch" | |
1e5db006 RR |
1208 | help |
1209 | SPI driver for Freescale MC33880 high-side/low-side switch. | |
1210 | This provides GPIO interface supporting inputs and outputs. | |
1211 | ||
df6df93c AD |
1212 | config GPIO_PISOSR |
1213 | tristate "Generic parallel-in/serial-out shift register" | |
1214 | help | |
1215 | GPIO driver for SPI compatible parallel-in/serial-out shift | |
1216 | registers. These are input only devices. | |
1217 | ||
0963670a LW |
1218 | endmenu |
1219 | ||
1220 | menu "SPI or I2C GPIO expanders" | |
1221 | depends on (SPI_MASTER && !I2C) || I2C | |
1222 | ||
1223 | config GPIO_MCP23S08 | |
1224 | tristate "Microchip MCP23xxx I/O expander" | |
60f749f8 | 1225 | depends on OF_GPIO |
dad3d272 | 1226 | select GPIOLIB_IRQCHIP |
e8e1a5b5 AL |
1227 | select REGMAP_I2C if I2C |
1228 | select REGMAP if SPI_MASTER | |
e7aa6d8c | 1229 | help |
0963670a LW |
1230 | SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017 |
1231 | I/O expanders. | |
1232 | This provides a GPIO interface supporting inputs and outputs. | |
1233 | The I2C versions of the chips can be used as interrupt-controller. | |
e7aa6d8c | 1234 | |
177b0381 | 1235 | endmenu |
25cf2507 | 1236 | |
177b0381 LW |
1237 | menu "USB GPIO expanders" |
1238 | depends on USB | |
9d5b72de LP |
1239 | |
1240 | config GPIO_VIPERBOARD | |
1241 | tristate "Viperboard GPIO a & b support" | |
03744529 | 1242 | depends on MFD_VIPERBOARD |
9d5b72de LP |
1243 | help |
1244 | Say yes here to access the GPIO signals of Nano River | |
1245 | Technologies Viperboard. There are two GPIO chips on the | |
1246 | board: gpioa and gpiob. | |
1247 | See viperboard API specification and Nano | |
1248 | River Tech's viperboard.h for detailed meaning | |
1249 | of the module parameters. | |
1250 | ||
177b0381 | 1251 | endmenu |
6732127f | 1252 | |
7444a72e | 1253 | endif |