]>
Commit | Line | Data |
---|---|---|
a9c5fff5 | 1 | # |
e849dc04 | 2 | # GPIO infrastructure and drivers |
a9c5fff5 DB |
3 | # |
4 | ||
7563bbf8 MB |
5 | config ARCH_HAVE_CUSTOM_GPIO_H |
6 | bool | |
7 | help | |
8 | Selecting this config option from the architecture Kconfig allows | |
9 | the architecture to provide a custom asm/gpio.h implementation | |
10 | overriding the default implementations. New uses of this are | |
11 | strongly discouraged. | |
12 | ||
7444a72e | 13 | config ARCH_WANT_OPTIONAL_GPIOLIB |
a9c5fff5 | 14 | bool |
7444a72e MB |
15 | help |
16 | Select this config option from the architecture Kconfig, if | |
17 | it is possible to use gpiolib on the architecture, but let the | |
18 | user decide whether to actually build it or not. | |
19 | Select this instead of ARCH_REQUIRE_GPIOLIB, if your architecture does | |
20 | not depend on GPIOs being available, but rather let the user | |
21 | decide whether he needs it or not. | |
22 | ||
23 | config ARCH_REQUIRE_GPIOLIB | |
24 | bool | |
25 | select GPIOLIB | |
a9c5fff5 DB |
26 | help |
27 | Platforms select gpiolib if they use this infrastructure | |
28 | for all their GPIOs, usually starting with ones integrated | |
29 | into SOC processors. | |
7444a72e MB |
30 | Selecting this from the architecture code will cause the gpiolib |
31 | code to always get built in. | |
32 | ||
7444a72e MB |
33 | |
34 | menuconfig GPIOLIB | |
35 | bool "GPIO Support" | |
36 | depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB | |
7444a72e MB |
37 | help |
38 | This enables GPIO support through the generic GPIO library. | |
39 | You only need to enable this, if you also want to enable | |
e849dc04 | 40 | one or more of the GPIO drivers below. |
7444a72e MB |
41 | |
42 | If unsure, say N. | |
a9c5fff5 | 43 | |
7444a72e | 44 | if GPIOLIB |
a9c5fff5 | 45 | |
b69ac524 AC |
46 | config GPIO_DEVRES |
47 | def_bool y | |
48 | depends on HAS_IOMEM | |
49 | ||
f141ed65 GL |
50 | config OF_GPIO |
51 | def_bool y | |
afe760e4 | 52 | depends on OF |
f141ed65 | 53 | |
e29482e8 MN |
54 | config GPIO_ACPI |
55 | def_bool y | |
56 | depends on ACPI | |
57 | ||
14250520 | 58 | config GPIOLIB_IRQCHIP |
fc346270 | 59 | select IRQ_DOMAIN |
14250520 LW |
60 | bool |
61 | ||
a9c5fff5 DB |
62 | config DEBUG_GPIO |
63 | bool "Debug GPIO calls" | |
64 | depends on DEBUG_KERNEL | |
65 | help | |
66 | Say Y here to add some extra checks and diagnostics to GPIO calls. | |
692105b8 ML |
67 | These checks help ensure that GPIOs have been properly initialized |
68 | before they are used, and that sleeping calls are not made from | |
69 | non-sleeping contexts. They can make bitbanged serial protocols | |
a9c5fff5 DB |
70 | slower. The diagnostics help catch the type of setup errors |
71 | that are most common when setting up new platforms or boards. | |
72 | ||
d8f388d8 DB |
73 | config GPIO_SYSFS |
74 | bool "/sys/class/gpio/... (sysfs interface)" | |
4c0ea233 | 75 | depends on SYSFS |
d8f388d8 DB |
76 | help |
77 | Say Y here to add a sysfs interface for GPIOs. | |
78 | ||
79 | This is mostly useful to work around omissions in a system's | |
80 | kernel support. Those are common in custom and semicustom | |
81 | hardware assembled using standard kernels with a minimum of | |
82 | custom patches. In those cases, userspace code may import | |
83 | a given GPIO from the kernel, if no kernel driver requested it. | |
84 | ||
85 | Kernel drivers may also request that a particular GPIO be | |
86 | exported to userspace; this can be useful when debugging. | |
87 | ||
c103de24 GL |
88 | config GPIO_GENERIC |
89 | tristate | |
90 | ||
e849dc04 | 91 | # put drivers in the right section, in alphabetical order |
a9c5fff5 | 92 | |
177b0381 | 93 | # This symbol is selected by both I2C and SPI expanders |
e952805d WS |
94 | config GPIO_MAX730X |
95 | tristate | |
96 | ||
177b0381 | 97 | menu "Memory mapped GPIO drivers" |
0bcb6069 | 98 | |
af0a33e2 AS |
99 | config GPIO_74XX_MMIO |
100 | tristate "GPIO driver for 74xx-ICs with MMIO access" | |
101 | depends on OF_GPIO | |
102 | select GPIO_GENERIC | |
103 | help | |
104 | Say yes here to support GPIO functionality for 74xx-compatible ICs | |
105 | with MMIO access. Compatible models include: | |
106 | 1 bit: 741G125 (Input), 741G74 (Output) | |
107 | 2 bits: 742G125 (Input), 7474 (Output) | |
108 | 4 bits: 74125 (Input), 74175 (Output) | |
109 | 6 bits: 74365 (Input), 74174 (Output) | |
110 | 8 bits: 74244 (Input), 74273 (Output) | |
111 | 16 bits: 741624 (Input), 7416374 (Output) | |
112 | ||
223fa272 LW |
113 | config GPIO_ALTERA |
114 | tristate "Altera GPIO" | |
115 | depends on OF_GPIO | |
116 | select GPIO_GENERIC | |
117 | select GPIOLIB_IRQCHIP | |
118 | help | |
119 | Say Y or M here to build support for the Altera PIO device. | |
120 | ||
121 | If driver is built as a module it will be called gpio-altera. | |
122 | ||
ea948cff LW |
123 | config GPIO_BCM_KONA |
124 | bool "Broadcom Kona GPIO" | |
125 | depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST) | |
126 | help | |
127 | Turn on GPIO support for Broadcom "Kona" chips. | |
128 | ||
3b0213d5 GF |
129 | config GPIO_BRCMSTB |
130 | tristate "BRCMSTB GPIO support" | |
131 | default y if ARCH_BRCMSTB | |
132 | depends on OF_GPIO && (ARCH_BRCMSTB || COMPILE_TEST) | |
133 | select GPIO_GENERIC | |
134 | help | |
135 | Say yes here to enable GPIO support for Broadcom STB (BCM7XXX) SoCs. | |
136 | ||
a3b8d4a5 | 137 | config GPIO_CLPS711X |
55fe14ab | 138 | tristate "CLPS711X GPIO support" |
ffd4bf1a | 139 | depends on ARCH_CLPS711X || COMPILE_TEST |
55fe14ab AS |
140 | select GPIO_GENERIC |
141 | help | |
142 | Say yes here to support GPIO on CLPS711X SoCs. | |
a3b8d4a5 | 143 | |
ee89cf63 GS |
144 | config GPIO_DAVINCI |
145 | bool "TI Davinci/Keystone GPIO support" | |
146 | default y if ARCH_DAVINCI | |
147 | depends on ARM && (ARCH_DAVINCI || ARCH_KEYSTONE) | |
148 | help | |
149 | Say yes here to enable GPIO support for TI Davinci/Keystone SoCs. | |
150 | ||
7779b345 JI |
151 | config GPIO_DWAPB |
152 | tristate "Synopsys DesignWare APB GPIO driver" | |
153 | select GPIO_GENERIC | |
154 | select GENERIC_IRQ_CHIP | |
7779b345 JI |
155 | help |
156 | Say Y or M here to build support for the Synopsys DesignWare APB | |
157 | GPIO block. | |
158 | ||
a07e103e MD |
159 | config GPIO_EM |
160 | tristate "Emma Mobile GPIO" | |
b5927854 | 161 | depends on ARM && OF_GPIO |
a07e103e MD |
162 | help |
163 | Say yes here to support GPIO on Renesas Emma Mobile SoCs. | |
164 | ||
c6b52c13 HS |
165 | config GPIO_EP93XX |
166 | def_bool y | |
167 | depends on ARCH_EP93XX | |
1e4c8842 | 168 | select GPIO_GENERIC |
c6b52c13 | 169 | |
d342571e RV |
170 | config GPIO_ETRAXFS |
171 | bool "Axis ETRAX FS General I/O" | |
172 | depends on CRIS || COMPILE_TEST | |
173 | depends on OF | |
174 | select GPIO_GENERIC | |
175 | help | |
176 | Say yes here to support the GPIO controller on Axis ETRAX FS SoCs. | |
177 | ||
6c17aa01 | 178 | config GPIO_F7188X |
7e960363 | 179 | tristate "F71869, F71869A, F71882FG and F71889F GPIO support" |
6c17aa01 SG |
180 | depends on X86 |
181 | help | |
182 | This option enables support for GPIOs found on Fintek Super-I/O | |
7e960363 | 183 | chips F71869, F71869A, F71882FG and F71889F. |
6c17aa01 SG |
184 | |
185 | To compile this driver as a module, choose M here: the module will | |
186 | be called f7188x-gpio. | |
187 | ||
223fa272 LW |
188 | config GPIO_GE_FPGA |
189 | bool "GE FPGA based GPIO" | |
190 | depends on GE_FPGA | |
191 | select GPIO_GENERIC | |
192 | help | |
193 | Support for common GPIO functionality provided on some GE Single Board | |
194 | Computers. | |
195 | ||
196 | This driver provides basic support (configure as input or output, read | |
197 | and write pin state) for GPIO implemented in a number of GE single | |
198 | board computers. | |
199 | ||
200 | config GPIO_GENERIC_PLATFORM | |
201 | tristate "Generic memory-mapped GPIO controller support (MMIO platform device)" | |
202 | select GPIO_GENERIC | |
203 | help | |
204 | Say yes here to support basic platform_device memory-mapped GPIO controllers. | |
205 | ||
206 | config GPIO_GRGPIO | |
207 | tristate "Aeroflex Gaisler GRGPIO support" | |
208 | depends on OF | |
209 | select GPIO_GENERIC | |
210 | select IRQ_DOMAIN | |
211 | help | |
212 | Select this to support Aeroflex Gaisler GRGPIO cores from the GRLIB | |
213 | VHDL IP core library. | |
214 | ||
215 | config GPIO_ICH | |
216 | tristate "Intel ICH GPIO" | |
217 | depends on PCI && X86 | |
218 | select MFD_CORE | |
219 | select LPC_ICH | |
220 | help | |
221 | Say yes here to support the GPIO functionality of a number of Intel | |
222 | ICH-based chipsets. Currently supported devices: ICH6, ICH7, ICH8 | |
223 | ICH9, ICH10, Series 5/3400 (eg Ibex Peak), Series 6/C200 (eg | |
224 | Cougar Point), NM10 (Tiger Point), and 3100 (Whitmore Lake). | |
225 | ||
226 | If unsure, say N. | |
227 | ||
228 | config GPIO_IOP | |
229 | tristate "Intel IOP GPIO" | |
230 | depends on ARM && (ARCH_IOP32X || ARCH_IOP33X) | |
231 | help | |
232 | Say yes here to support the GPIO functionality of a number of Intel | |
233 | IOP32X or IOP33X. | |
234 | ||
235 | If unsure, say N. | |
236 | ||
237 | config GPIO_IT8761E | |
238 | tristate "IT8761E GPIO support" | |
239 | depends on X86 # unconditional access to IO space. | |
240 | help | |
241 | Say yes here to support GPIO functionality of IT8761E super I/O chip. | |
242 | ||
243 | config GPIO_LOONGSON | |
244 | bool "Loongson-2/3 GPIO support" | |
245 | depends on CPU_LOONGSON2 || CPU_LOONGSON3 | |
246 | help | |
247 | driver for GPIO functionality on Loongson-2F/3A/3B processors. | |
248 | ||
13a43fd9 JE |
249 | config GPIO_LPC18XX |
250 | bool "NXP LPC18XX/43XX GPIO support" | |
251 | default y if ARCH_LPC18XX | |
252 | depends on OF_GPIO && (ARCH_LPC18XX || COMPILE_TEST) | |
253 | help | |
254 | Select this option to enable GPIO driver for | |
255 | NXP LPC18XX/43XX devices. | |
256 | ||
223fa272 LW |
257 | config GPIO_LYNXPOINT |
258 | tristate "Intel Lynxpoint GPIO support" | |
259 | depends on ACPI && X86 | |
260 | select GPIOLIB_IRQCHIP | |
261 | help | |
262 | driver for GPIO functionality on Intel Lynxpoint PCH chipset | |
263 | Requires ACPI device enumeration code to set up a platform device. | |
264 | ||
0da094d8 JB |
265 | config GPIO_MB86S7X |
266 | bool "GPIO support for Fujitsu MB86S7x Platforms" | |
267 | depends on ARCH_MB86S7X | |
268 | help | |
269 | Say yes here to support the GPIO controller in Fujitsu MB86S70 SoCs. | |
270 | ||
223fa272 LW |
271 | config GPIO_MM_LANTIQ |
272 | bool "Lantiq Memory mapped GPIOs" | |
273 | depends on LANTIQ && SOC_XWAY | |
274 | help | |
275 | This enables support for memory mapped GPIOs on the External Bus Unit | |
276 | (EBU) found on Lantiq SoCs. The gpios are output only as they are | |
277 | created by attaching a 16bit latch to the bus. | |
278 | ||
0299b77b JJ |
279 | config GPIO_MOXART |
280 | bool "MOXART GPIO support" | |
281 | depends on ARCH_MOXART | |
3c01b9a8 | 282 | select GPIO_GENERIC |
0299b77b JJ |
283 | help |
284 | Select this option to enable GPIO driver for | |
285 | MOXA ART SoC devices. | |
286 | ||
6eae1ace GL |
287 | config GPIO_MPC5200 |
288 | def_bool y | |
289 | depends on PPC_MPC52xx | |
290 | ||
c68308dd WS |
291 | config GPIO_MPC8XXX |
292 | bool "MPC512x/MPC8xxx GPIO support" | |
293 | depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \ | |
294 | FSL_SOC_BOOKE || PPC_86xx | |
295 | help | |
296 | Say Y here if you're going to use hardware that connects to the | |
297 | MPC512x/831x/834x/837x/8572/8610 GPIOs. | |
298 | ||
1a5ab4b3 DB |
299 | config GPIO_MSM_V2 |
300 | tristate "Qualcomm MSM GPIO v2" | |
add798a4 | 301 | depends on GPIOLIB && OF && ARCH_QCOM |
1a5ab4b3 DB |
302 | help |
303 | Say yes here to support the GPIO interface on ARM v7 based | |
304 | Qualcomm MSM chips. Most of the pins on the MSM can be | |
305 | selected for GPIO, and are controlled by this driver. | |
306 | ||
fefe7b09 TP |
307 | config GPIO_MVEBU |
308 | def_bool y | |
49e928d6 | 309 | depends on PLAT_ORION |
bc1008cf | 310 | depends on OF |
fefe7b09 TP |
311 | select GPIO_GENERIC |
312 | select GENERIC_IRQ_CHIP | |
313 | ||
d37a65bb SG |
314 | config GPIO_MXC |
315 | def_bool y | |
316 | depends on ARCH_MXC | |
c103de24 | 317 | select GPIO_GENERIC |
e4ea9333 | 318 | select GENERIC_IRQ_CHIP |
c103de24 GL |
319 | |
320 | config GPIO_MXS | |
321 | def_bool y | |
322 | depends on ARCH_MXS | |
06f88a8a | 323 | select GPIO_GENERIC |
498c17cf | 324 | select GENERIC_IRQ_CHIP |
d37a65bb | 325 | |
aca58a66 DD |
326 | config GPIO_OCTEON |
327 | tristate "Cavium OCTEON GPIO" | |
328 | depends on GPIOLIB && CAVIUM_OCTEON_SOC | |
329 | default y | |
330 | help | |
331 | Say yes here to support the on-chip GPIO lines on the OCTEON | |
332 | family of SOCs. | |
333 | ||
cd0a3748 | 334 | config GPIO_OMAP |
cac089f9 | 335 | tristate "TI OMAP GPIO support" if ARCH_OMAP2PLUS || COMPILE_TEST |
cd0a3748 | 336 | default y if ARCH_OMAP |
9d5d96ef AB |
337 | depends on ARM |
338 | select GENERIC_IRQ_CHIP | |
fb655f57 | 339 | select GPIOLIB_IRQCHIP |
cd0a3748 JMC |
340 | help |
341 | Say yes here to enable GPIO support for TI OMAP SoCs. | |
342 | ||
1e9c2859 BS |
343 | config GPIO_PL061 |
344 | bool "PrimeCell PL061 GPIO support" | |
8a242842 | 345 | depends on ARM_AMBA |
a5d6d271 | 346 | select IRQ_DOMAIN |
8d5b24bd | 347 | select GPIOLIB_IRQCHIP |
1e9c2859 BS |
348 | help |
349 | Say yes here to support the PrimeCell PL061 GPIO device | |
350 | ||
157d2644 HZ |
351 | config GPIO_PXA |
352 | bool "PXA GPIO support" | |
353 | depends on ARCH_PXA || ARCH_MMP | |
354 | help | |
355 | Say yes here to support the PXA GPIO device | |
356 | ||
119f5e44 MD |
357 | config GPIO_RCAR |
358 | tristate "Renesas R-Car GPIO" | |
821e85f2 | 359 | depends on ARM && (ARCH_SHMOBILE || COMPILE_TEST) |
c7f3c5d3 | 360 | select GPIOLIB_IRQCHIP |
119f5e44 MD |
361 | help |
362 | Say yes here to support GPIO on Renesas R-Car SoCs. | |
363 | ||
880cf071 TF |
364 | config GPIO_SAMSUNG |
365 | bool | |
366 | depends on PLAT_SAMSUNG | |
367 | help | |
368 | Legacy GPIO support. Use only for platforms without support for | |
369 | pinctrl. | |
370 | ||
223fa272 LW |
371 | config GPIO_SCH |
372 | tristate "Intel SCH/TunnelCreek/Centerton/Quark X1000 GPIO" | |
373 | depends on PCI && X86 | |
374 | select MFD_CORE | |
375 | select LPC_SCH | |
376 | help | |
377 | Say yes here to support GPIO interface on Intel Poulsbo SCH, | |
378 | Intel Tunnel Creek processor, Intel Centerton processor or | |
379 | Intel Quark X1000 SoC. | |
380 | ||
381 | The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are | |
382 | powered by the core power rail and are turned off during sleep | |
383 | modes (S3 and higher). The remaining four GPIOs are powered by | |
384 | the Intel SCH suspend power supply. These GPIOs remain | |
385 | active during S3. The suspend powered GPIOs can be used to wake the | |
386 | system from the Suspend-to-RAM state. | |
387 | ||
388 | The Intel Tunnel Creek processor has 5 GPIOs powered by the | |
389 | core power rail and 9 from suspend power supply. | |
390 | ||
391 | The Intel Centerton processor has a total of 30 GPIO pins. | |
392 | Twenty-one are powered by the core power rail and 9 from the | |
393 | suspend power supply. | |
394 | ||
395 | The Intel Quark X1000 SoC has 2 GPIOs powered by the core | |
396 | power well and 6 from the suspend power well. | |
397 | ||
12262bef BR |
398 | config GPIO_SCH311X |
399 | tristate "SMSC SCH311x SuperI/O GPIO" | |
400 | help | |
401 | Driver to enable the GPIOs found on SMSC SMSC SCH3112, SCH3114 and | |
402 | SCH3116 "Super I/O" chipsets. | |
403 | ||
404 | To compile this driver as a module, choose M here: the module will | |
405 | be called gpio-sch311x. | |
406 | ||
b53bc281 SH |
407 | config GPIO_SPEAR_SPICS |
408 | bool "ST SPEAr13xx SPI Chip Select as GPIO support" | |
409 | depends on PLAT_SPEAR | |
410 | select GENERIC_IRQ_CHIP | |
411 | help | |
412 | Say yes here to support ST SPEAr SPI Chip Select as GPIO device | |
413 | ||
7b0d44f3 AR |
414 | config GPIO_STA2X11 |
415 | bool "STA2x11/ConneXt GPIO support" | |
416 | depends on MFD_STA2X11 | |
417 | select GENERIC_IRQ_CHIP | |
418 | help | |
419 | Say yes here to support the STA2x11/ConneXt GPIO device. | |
420 | The GPIO module has 128 GPIO pins with alternate functions. | |
421 | ||
be9cab5b LW |
422 | config GPIO_STP_XWAY |
423 | bool "XWAY STP GPIOs" | |
424 | depends on SOC_XWAY | |
425 | help | |
426 | This enables support for the Serial To Parallel (STP) unit found on | |
427 | XWAY SoC. The STP allows the SoC to drive a shift registers cascade, | |
428 | that can be up to 24 bit. This peripheral is aimed at driving leds. | |
429 | Some of the gpios/leds can be auto updated by the soc with dsl and | |
430 | phy status. | |
431 | ||
6a8a0c1d AS |
432 | config GPIO_SYSCON |
433 | tristate "GPIO based on SYSCON" | |
434 | depends on MFD_SYSCON && OF | |
435 | help | |
436 | Say yes here to support GPIO functionality though SYSCON driver. | |
437 | ||
223fa272 LW |
438 | config GPIO_TB10X |
439 | bool | |
440 | select GENERIC_IRQ_CHIP | |
441 | select OF_GPIO | |
442 | ||
759f5f37 VD |
443 | config GPIO_TS5500 |
444 | tristate "TS-5500 DIO blocks and compatibles" | |
f29b9d13 | 445 | depends on TS5500 || COMPILE_TEST |
759f5f37 VD |
446 | help |
447 | This driver supports Digital I/O exposed by pin blocks found on some | |
448 | Technologic Systems platforms. It includes, but is not limited to, 3 | |
449 | blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600 | |
450 | LCD port. | |
451 | ||
9caf1f22 JH |
452 | config GPIO_TZ1090 |
453 | bool "Toumaz Xenif TZ1090 GPIO support" | |
454 | depends on SOC_TZ1090 | |
04777396 | 455 | select GENERIC_IRQ_CHIP |
9caf1f22 JH |
456 | default y |
457 | help | |
458 | Say yes here to support Toumaz Xenif TZ1090 GPIOs. | |
459 | ||
79bb6460 JH |
460 | config GPIO_TZ1090_PDC |
461 | bool "Toumaz Xenif TZ1090 PDC GPIO support" | |
462 | depends on SOC_TZ1090 | |
463 | default y | |
464 | help | |
465 | Say yes here to support Toumaz Xenif TZ1090 PDC GPIOs. | |
466 | ||
7f2691a1 SA |
467 | config GPIO_VF610 |
468 | def_bool y | |
469 | depends on ARCH_MXC && SOC_VF610 | |
470 | select GPIOLIB_IRQCHIP | |
471 | help | |
472 | Say yes here to support Vybrid vf610 GPIOs. | |
473 | ||
223fa272 LW |
474 | config GPIO_VR41XX |
475 | tristate "NEC VR4100 series General-purpose I/O Uint support" | |
476 | depends on CPU_VR41XX | |
477 | help | |
478 | Say yes here to support the NEC VR4100 series General-purpose I/O Uint | |
479 | ||
480 | config GPIO_VX855 | |
481 | tristate "VIA VX855/VX875 GPIO" | |
482 | depends on PCI | |
483 | select MFD_CORE | |
484 | select MFD_VX855 | |
485 | help | |
486 | Support access to the VX855/VX875 GPIO lines through the gpio library. | |
487 | ||
488 | This driver provides common support for accessing the device, | |
489 | additional drivers must be enabled in order to use the | |
490 | functionality of the device. | |
491 | ||
29cbf458 FK |
492 | config GPIO_XGENE |
493 | bool "APM X-Gene GPIO controller support" | |
494 | depends on ARM64 && OF_GPIO | |
495 | help | |
496 | This driver is to support the GPIO block within the APM X-Gene SoC | |
497 | platform's generic flash controller. The GPIO pins are muxed with | |
498 | the generic flash controller's address and data pins. Say yes | |
499 | here to enable the GFC GPIO functionality. | |
500 | ||
b2b35e10 V |
501 | config GPIO_XGENE_SB |
502 | tristate "APM X-Gene GPIO standby controller support" | |
503 | depends on ARCH_XGENE && OF_GPIO | |
504 | select GPIO_GENERIC | |
505 | help | |
506 | This driver supports the GPIO block within the APM X-Gene | |
507 | Standby Domain. Say yes here to enable the GPIO functionality. | |
508 | ||
0bcb6069 | 509 | config GPIO_XILINX |
c54c58ba | 510 | tristate "Xilinx GPIO support" |
0a4a3529 | 511 | depends on OF_GPIO && (PPC || MICROBLAZE || ARCH_ZYNQ || X86) |
0bcb6069 JL |
512 | help |
513 | Say yes here to support the Xilinx FPGA GPIO device | |
514 | ||
ff718800 KP |
515 | config GPIO_XLP |
516 | tristate "Netlogic XLP GPIO support" | |
517 | depends on CPU_XLP | |
518 | select GPIOLIB_IRQCHIP | |
519 | help | |
520 | This driver provides support for GPIO interface on Netlogic XLP MIPS64 | |
521 | SoCs. Currently supported XLP variants are XLP8XX, XLP3XX, XLP2XX, | |
522 | XLP9XX and XLP5XX. | |
523 | ||
524 | If unsure, say N. | |
525 | ||
3b31d0ec BS |
526 | config GPIO_XTENSA |
527 | bool "Xtensa GPIO32 support" | |
528 | depends on XTENSA | |
a1a2bdec | 529 | depends on HAVE_XTENSA_GPIO32 |
3b31d0ec BS |
530 | depends on !SMP |
531 | help | |
532 | Say yes here to support the Xtensa internal GPIO32 IMPWIRE (input) | |
533 | and EXPSTATE (output) ports | |
534 | ||
223fa272 LW |
535 | config GPIO_ZEVIO |
536 | bool "LSI ZEVIO SoC memory mapped GPIOs" | |
537 | depends on ARM && OF_GPIO | |
27fdd325 | 538 | help |
223fa272 | 539 | Say yes here to support the GPIO controller in LSI ZEVIO SoCs. |
27fdd325 | 540 | |
223fa272 LW |
541 | config GPIO_ZYNQ |
542 | tristate "Xilinx Zynq GPIO support" | |
bdf7a4ae | 543 | depends on ARCH_ZYNQ || ARCH_ZYNQMP |
7f87210e | 544 | select GPIOLIB_IRQCHIP |
be9b06b2 | 545 | help |
223fa272 | 546 | Say yes here to support Xilinx Zynq GPIO controller. |
92021490 | 547 | |
177b0381 | 548 | endmenu |
be9b06b2 | 549 | |
177b0381 LW |
550 | menu "I2C GPIO expanders" |
551 | depends on I2C | |
92021490 | 552 | |
bf5a16ba LW |
553 | config GPIO_ADP5588 |
554 | tristate "ADP5588 I2C GPIO expander" | |
555 | depends on I2C | |
6ed9f9c4 | 556 | help |
bf5a16ba LW |
557 | This option enables support for 18 GPIOs found |
558 | on Analog Devices ADP5588 GPIO Expanders. | |
be9b06b2 | 559 | |
bf5a16ba LW |
560 | config GPIO_ADP5588_IRQ |
561 | bool "Interrupt controller support for ADP5588" | |
562 | depends on GPIO_ADP5588=y | |
e9004f50 | 563 | help |
bf5a16ba LW |
564 | Say yes here to enable the adp5588 to be used as an interrupt |
565 | controller. It requires the driver to be built in the kernel. | |
31ba56f2 | 566 | |
bf5a16ba LW |
567 | config GPIO_ADNP |
568 | tristate "Avionic Design N-bit GPIO expander" | |
569 | depends on I2C && OF_GPIO | |
104fb1d5 ZL |
570 | select GPIOLIB_IRQCHIP |
571 | help | |
bf5a16ba LW |
572 | This option enables support for N GPIOs found on Avionic Design |
573 | I2C GPIO expanders. The register space will be extended by powers | |
574 | of two, so the controller will need to accommodate for that. For | |
575 | example: if a controller provides 48 pins, 6 registers will be | |
576 | enough to represent all pins, but the driver will assume a | |
577 | register layout for 64 pins (8 registers). | |
0cc59b9d | 578 | |
e952805d WS |
579 | config GPIO_MAX7300 |
580 | tristate "Maxim MAX7300 GPIO expander" | |
581 | depends on I2C | |
582 | select GPIO_MAX730X | |
583 | help | |
2b861f4b | 584 | GPIO driver for Maxim MAX7300 I2C-based GPIO expander. |
e952805d | 585 | |
bbcd6d54 EM |
586 | config GPIO_MAX732X |
587 | tristate "MAX7319, MAX7320-7327 I2C Port Expanders" | |
588 | depends on I2C | |
589 | help | |
590 | Say yes here to support the MAX7319, MAX7320-7327 series of I2C | |
591 | Port Expanders. Each IO port on these chips has a fixed role of | |
592 | Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain | |
593 | Input and Output (designed by 'P'). The combinations are listed | |
594 | below: | |
595 | ||
596 | 8 bits: max7319 (8I), max7320 (8O), max7321 (8P), | |
597 | max7322 (4I4O), max7323 (4P4O) | |
598 | ||
599 | 16 bits: max7324 (8I8O), max7325 (8P8O), | |
600 | max7326 (4I12O), max7327 (4P12O) | |
601 | ||
602 | Board setup code must specify the model to use, and the start | |
603 | number for these GPIOs. | |
604 | ||
a80a0bbe MZ |
605 | config GPIO_MAX732X_IRQ |
606 | bool "Interrupt controller support for MAX732x" | |
0244ad00 | 607 | depends on GPIO_MAX732X=y |
984f6643 | 608 | select GPIOLIB_IRQCHIP |
a80a0bbe MZ |
609 | help |
610 | Say yes here to enable the max732x to be used as an interrupt | |
611 | controller. It requires the driver to be built in the kernel. | |
612 | ||
608589b1 | 613 | config GPIO_MC9S08DZ60 |
614 | bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions" | |
4c30aa33 | 615 | depends on I2C=y && MACH_MX35_3DS |
608589b1 | 616 | help |
617 | Select this to enable the MC9S08DZ60 GPIO driver | |
618 | ||
f3dc3630 | 619 | config GPIO_PCA953X |
eb32b5aa | 620 | tristate "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports" |
9e60fdcf | 621 | depends on I2C |
622 | help | |
7059d4b0 DB |
623 | Say yes here to provide access to several register-oriented |
624 | SMBus I/O expanders, made mostly by NXP or TI. Compatible | |
625 | models include: | |
626 | ||
627 | 4 bits: pca9536, pca9537 | |
628 | ||
c29985dd | 629 | 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554, |
e73760a6 | 630 | pca9556, pca9557, pca9574, tca6408, xra1202 |
7059d4b0 | 631 | |
c29985dd AL |
632 | 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575, |
633 | tca6416 | |
9e60fdcf | 634 | |
1e191695 AS |
635 | 24 bits: tca6424 |
636 | ||
eb32b5aa | 637 | 40 bits: pca9505, pca9698 |
1e191695 | 638 | |
89ea8bbe MZ |
639 | config GPIO_PCA953X_IRQ |
640 | bool "Interrupt controller support for PCA953x" | |
641 | depends on GPIO_PCA953X=y | |
7bcbce55 | 642 | select GPIOLIB_IRQCHIP |
89ea8bbe MZ |
643 | help |
644 | Say yes here to enable the pca953x to be used as an interrupt | |
645 | controller. It requires the driver to be built in the kernel. | |
646 | ||
15fae37d | 647 | config GPIO_PCF857X |
1673ad52 | 648 | tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders" |
15fae37d | 649 | depends on I2C |
a39294bd | 650 | select GPIOLIB_IRQCHIP |
901acf5b | 651 | select IRQ_DOMAIN |
15fae37d DB |
652 | help |
653 | Say yes here to provide access to most "quasi-bidirectional" I2C | |
654 | GPIO expanders used for additional digital outputs or inputs. | |
655 | Most of these parts are from NXP, though TI is a second source for | |
656 | some of them. Compatible models include: | |
657 | ||
658 | 8 bits: pcf8574, pcf8574a, pca8574, pca8574a, | |
1673ad52 DB |
659 | pca9670, pca9672, pca9674, pca9674a, |
660 | max7328, max7329 | |
15fae37d DB |
661 | |
662 | 16 bits: pcf8575, pcf8575c, pca8575, | |
663 | pca9671, pca9673, pca9675 | |
664 | ||
665 | Your board setup code will need to declare the expanders in | |
666 | use, and assign numbers to the GPIOs they expose. Those GPIOs | |
667 | can then be used from drivers and other kernel code, just like | |
668 | other GPIOs, but only accessible from task contexts. | |
669 | ||
670 | This driver provides an in-kernel interface to those GPIOs using | |
671 | platform-neutral GPIO calls. | |
672 | ||
c34f16b7 GB |
673 | config GPIO_SX150X |
674 | bool "Semtech SX150x I2C GPIO expander" | |
675 | depends on I2C=y | |
093e9435 | 676 | select GPIOLIB_IRQCHIP |
c34f16b7 GB |
677 | default n |
678 | help | |
679 | Say yes here to provide support for Semtech SX150-series I2C | |
680 | GPIO expanders. Compatible models include: | |
681 | ||
682 | 8 bits: sx1508q | |
683 | 16 bits: sx1509q | |
684 | ||
177b0381 LW |
685 | endmenu |
686 | ||
687 | menu "MFD GPIO expanders" | |
be9cab5b LW |
688 | |
689 | config GPIO_ADP5520 | |
690 | tristate "GPIO Support for ADP5520 PMIC" | |
691 | depends on PMIC_ADP5520 | |
692 | help | |
693 | This option enables support for on-chip GPIO found | |
694 | on Analog Devices ADP5520 PMICs. | |
695 | ||
696 | config GPIO_ARIZONA | |
697 | tristate "Wolfson Microelectronics Arizona class devices" | |
698 | depends on MFD_ARIZONA | |
699 | help | |
700 | Support for GPIOs on Wolfson Arizona class devices. | |
701 | ||
702 | config GPIO_CRYSTAL_COVE | |
703 | tristate "GPIO support for Crystal Cove PMIC" | |
704 | depends on INTEL_SOC_PMIC | |
705 | select GPIOLIB_IRQCHIP | |
706 | help | |
707 | Support for GPIO pins on Crystal Cove PMIC. | |
708 | ||
709 | Say Yes if you have a Intel SoC based tablet with Crystal Cove PMIC | |
710 | inside. | |
711 | ||
712 | This driver can also be built as a module. If so, the module will be | |
713 | called gpio-crystalcove. | |
714 | ||
715 | config GPIO_CS5535 | |
716 | tristate "AMD CS5535/CS5536 GPIO support" | |
717 | depends on MFD_CS5535 | |
718 | help | |
719 | The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that | |
720 | can be used for quite a number of things. The CS5535/6 is found on | |
721 | AMD Geode and Lemote Yeeloong devices. | |
722 | ||
723 | If unsure, say N. | |
724 | ||
725 | config GPIO_DA9052 | |
726 | tristate "Dialog DA9052 GPIO" | |
727 | depends on PMIC_DA9052 | |
728 | help | |
729 | Say yes here to enable the GPIO driver for the DA9052 chip. | |
730 | ||
731 | config GPIO_DA9055 | |
732 | tristate "Dialog Semiconductor DA9055 GPIO" | |
733 | depends on MFD_DA9055 | |
734 | help | |
735 | Say yes here to enable the GPIO driver for the DA9055 chip. | |
736 | ||
737 | The Dialog DA9055 PMIC chip has 3 GPIO pins that can be | |
738 | be controller by this driver. | |
739 | ||
740 | If driver is built as a module it will be called gpio-da9055. | |
741 | ||
742 | config GPIO_DLN2 | |
743 | tristate "Diolan DLN2 GPIO support" | |
744 | depends on MFD_DLN2 | |
745 | select GPIOLIB_IRQCHIP | |
746 | ||
747 | help | |
748 | Select this option to enable GPIO driver for the Diolan DLN2 | |
749 | board. | |
750 | ||
751 | This driver can also be built as a module. If so, the module | |
752 | will be called gpio-dln2. | |
753 | ||
754 | config GPIO_JANZ_TTL | |
755 | tristate "Janz VMOD-TTL Digital IO Module" | |
756 | depends on MFD_JANZ_CMODIO | |
757 | help | |
758 | This enables support for the Janz VMOD-TTL Digital IO module. | |
759 | This driver provides support for driving the pins in output | |
760 | mode only. Input mode is not supported. | |
761 | ||
762 | config GPIO_KEMPLD | |
763 | tristate "Kontron ETX / COMexpress GPIO" | |
764 | depends on MFD_KEMPLD | |
765 | help | |
766 | This enables support for the PLD GPIO interface on some Kontron ETX | |
767 | and COMexpress (ETXexpress) modules. | |
768 | ||
769 | This driver can also be built as a module. If so, the module will be | |
770 | called gpio-kempld. | |
771 | ||
772 | config GPIO_LP3943 | |
773 | tristate "TI/National Semiconductor LP3943 GPIO expander" | |
774 | depends on MFD_LP3943 | |
775 | help | |
776 | GPIO driver for LP3943 MFD. | |
777 | LP3943 can be used as a GPIO expander which provides up to 16 GPIOs. | |
778 | Open drain outputs are required for this usage. | |
779 | ||
780 | config GPIO_MSIC | |
781 | bool "Intel MSIC mixed signal gpio support" | |
782 | depends on MFD_INTEL_MSIC | |
783 | help | |
784 | Enable support for GPIO on intel MSIC controllers found in | |
785 | intel MID devices | |
786 | ||
787 | config GPIO_PALMAS | |
788 | bool "TI PALMAS series PMICs GPIO" | |
789 | depends on MFD_PALMAS | |
790 | help | |
791 | Select this option to enable GPIO driver for the TI PALMAS | |
792 | series chip family. | |
793 | ||
e9fe32bc LD |
794 | config GPIO_RC5T583 |
795 | bool "RICOH RC5T583 GPIO" | |
796 | depends on MFD_RC5T583 | |
797 | help | |
798 | Select this option to enable GPIO driver for the Ricoh RC5T583 | |
799 | chip family. | |
800 | This driver provides the support for driving/reading the gpio pins | |
801 | of RC5T583 device through standard gpio library. | |
802 | ||
03f822f5 RV |
803 | config GPIO_STMPE |
804 | bool "STMPE GPIOs" | |
805 | depends on MFD_STMPE | |
1dfb4a0d | 806 | depends on OF_GPIO |
fe44e70d | 807 | select GPIOLIB_IRQCHIP |
03f822f5 RV |
808 | help |
809 | This enables support for the GPIOs found on the STMPE I/O | |
810 | Expanders. | |
811 | ||
f4e8afdc SI |
812 | config GPIO_TC3589X |
813 | bool "TC3589X GPIOs" | |
814 | depends on MFD_TC3589X | |
1422731d | 815 | depends on OF_GPIO |
cf42f1cf | 816 | select GPIOLIB_IRQCHIP |
d88b25be | 817 | help |
f4e8afdc | 818 | This enables support for the GPIOs found on the TC3589X |
d88b25be RV |
819 | I/O Expander. |
820 | ||
be9cab5b LW |
821 | config GPIO_TIMBERDALE |
822 | bool "Support for timberdale GPIO IP" | |
823 | depends on MFD_TIMBERDALE | |
824 | ---help--- | |
825 | Add support for the GPIO IP in the timberdale FPGA. | |
826 | ||
827 | config GPIO_TPS6586X | |
828 | bool "TPS6586X GPIO" | |
829 | depends on MFD_TPS6586X | |
830 | help | |
831 | Select this option to enable GPIO driver for the TPS6586X | |
832 | chip family. | |
833 | ||
834 | config GPIO_TPS65910 | |
835 | bool "TPS65910 GPIO" | |
836 | depends on MFD_TPS65910 | |
837 | help | |
838 | Select this option to enable GPIO driver for the TPS65910 | |
839 | chip family. | |
840 | ||
668a6cc7 MO |
841 | config GPIO_TPS65912 |
842 | tristate "TI TPS65912 GPIO" | |
843 | depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI) | |
844 | help | |
845 | This driver supports TPS65912 gpio chip | |
846 | ||
e9d35947 DB |
847 | config GPIO_TWL4030 |
848 | tristate "TWL4030, TWL5030, and TPS659x0 GPIOs" | |
849 | depends on TWL4030_CORE | |
850 | help | |
851 | Say yes here to access the GPIO signals of various multi-function | |
852 | power management chips from Texas Instruments. | |
853 | ||
70ffd691 PU |
854 | config GPIO_TWL6040 |
855 | tristate "TWL6040 GPO" | |
856 | depends on TWL6040_CORE | |
857 | help | |
858 | Say yes here to access the GPO signals of twl6040 | |
859 | audio chip from Texas Instruments. | |
860 | ||
be9cab5b LW |
861 | config GPIO_UCB1400 |
862 | tristate "Philips UCB1400 GPIO" | |
863 | depends on UCB1400_CORE | |
864 | help | |
865 | This enables support for the Philips UCB1400 GPIO pins. | |
866 | The UCB1400 is an AC97 audio codec. | |
867 | ||
e4b736f1 MB |
868 | config GPIO_WM831X |
869 | tristate "WM831x GPIOs" | |
870 | depends on MFD_WM831X | |
871 | help | |
872 | Say yes here to access the GPIO signals of WM831x power management | |
873 | chips from Wolfson Microelectronics. | |
874 | ||
38f6ce45 MB |
875 | config GPIO_WM8350 |
876 | tristate "WM8350 GPIOs" | |
877 | depends on MFD_WM8350 | |
878 | help | |
879 | Say yes here to access the GPIO signals of WM8350 power management | |
880 | chips from Wolfson Microelectronics. | |
881 | ||
2955c309 MB |
882 | config GPIO_WM8994 |
883 | tristate "WM8994 GPIOs" | |
884 | depends on MFD_WM8994 | |
885 | help | |
886 | Say yes here to access the GPIO signals of WM8994 audio hub | |
887 | CODECs from Wolfson Microelectronics. | |
888 | ||
177b0381 | 889 | endmenu |
ef72af40 | 890 | |
177b0381 LW |
891 | menu "PCI GPIO expanders" |
892 | depends on PCI | |
459773ae | 893 | |
92c33ef7 LW |
894 | config GPIO_AMD8111 |
895 | tristate "AMD 8111 GPIO driver" | |
896 | depends on PCI | |
5e969a40 | 897 | help |
92c33ef7 | 898 | The AMD 8111 south bridge contains 32 GPIO pins which can be used. |
ff1d5c2f | 899 | |
92c33ef7 LW |
900 | Note, that usually system firmware/ACPI handles GPIO pins on their |
901 | own and users might easily break their systems with uncarefull usage | |
902 | of this driver! | |
5f0a96b0 | 903 | |
92c33ef7 | 904 | If unsure, say N |
5f0a96b0 | 905 | |
ff1d5c2f MB |
906 | config GPIO_BT8XX |
907 | tristate "BT8XX GPIO abuser" | |
908 | depends on PCI && VIDEO_BT848=n | |
909 | help | |
22520edc | 910 | The BT8xx frame grabber chip has 24 GPIO pins that can be abused |
ff1d5c2f MB |
911 | as a cheap PCI GPIO card. |
912 | ||
913 | This chip can be found on Miro, Hauppauge and STB TV-cards. | |
914 | ||
915 | The card needs to be physically altered for using it as a | |
916 | GPIO card. For more information on how to build a GPIO card | |
917 | from a BT8xx TV card, see the documentation file at | |
918 | Documentation/bt8xxgpio.txt | |
919 | ||
920 | If unsure, say N. | |
921 | ||
84743ea3 DC |
922 | config GPIO_INTEL_MID |
923 | bool "Intel Mid GPIO support" | |
61ab3fe5 | 924 | depends on PCI && X86 |
fc346270 | 925 | select GPIOLIB_IRQCHIP |
8bf02617 | 926 | help |
84743ea3 | 927 | Say Y here to support Intel Mid GPIO. |
8bf02617 | 928 | |
92c33ef7 LW |
929 | config GPIO_ML_IOH |
930 | tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support" | |
931 | depends on PCI | |
932 | select GENERIC_IRQ_CHIP | |
933 | help | |
934 | ML7213 is companion chip for Intel Atom E6xx series. | |
935 | This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output | |
936 | Hub) which is for IVI(In-Vehicle Infotainment) use. | |
937 | This driver can access the IOH's GPIO device. | |
938 | ||
04c17aa8 | 939 | config GPIO_PCH |
868fea05 | 940 | tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO" |
3ff35cbc | 941 | depends on PCI && (X86_32 || COMPILE_TEST) |
38eb18a6 | 942 | select GENERIC_IRQ_CHIP |
04c17aa8 TM |
943 | help |
944 | This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff | |
945 | which is an IOH(Input/Output Hub) for x86 embedded processor. | |
946 | This driver can access PCH GPIO device. | |
947 | ||
868fea05 TM |
948 | This driver also can be used for LAPIS Semiconductor IOH(Input/ |
949 | Output Hub), ML7223 and ML7831. | |
bc786cce | 950 | ML7223 IOH is for MP(Media Phone) use. |
868fea05 TM |
951 | ML7831 IOH is for general purpose use. |
952 | ML7223/ML7831 is companion chip for Intel Atom E6xx series. | |
953 | ML7223/ML7831 is completely compatible for Intel EG20T PCH. | |
bc786cce | 954 | |
92c33ef7 LW |
955 | config GPIO_RDC321X |
956 | tristate "RDC R-321x GPIO support" | |
49a36793 | 957 | depends on PCI |
92c33ef7 LW |
958 | select MFD_CORE |
959 | select MFD_RDC321X | |
49a36793 | 960 | help |
92c33ef7 LW |
961 | Support for the RDC R321x SoC GPIOs over southbridge |
962 | PCI configuration space. | |
49a36793 | 963 | |
b43ab901 SAS |
964 | config GPIO_SODAVILLE |
965 | bool "Intel Sodaville GPIO support" | |
3ffc9ceb | 966 | depends on X86 && PCI && OF |
b43ab901 SAS |
967 | select GPIO_GENERIC |
968 | select GENERIC_IRQ_CHIP | |
969 | help | |
970 | Say Y here to support Intel Sodaville GPIO. | |
971 | ||
177b0381 | 972 | endmenu |
35570ac6 | 973 | |
177b0381 LW |
974 | menu "SPI GPIO expanders" |
975 | depends on SPI_MASTER | |
9956d02d | 976 | |
a7ec2e7f LW |
977 | config GPIO_74X164 |
978 | tristate "74x164 serial-in/parallel-out 8-bits shift register" | |
979 | depends on SPI_MASTER && OF | |
980 | help | |
981 | Driver for 74x164 compatible serial-in/parallel-out 8-outputs | |
982 | shift registers. This driver can be used to provide access | |
983 | to more gpio outputs. | |
a9c5fff5 | 984 | |
0c36ec31 JB |
985 | config GPIO_MAX7301 |
986 | tristate "Maxim MAX7301 GPIO expander" | |
987 | depends on SPI_MASTER | |
e952805d | 988 | select GPIO_MAX730X |
0c36ec31 | 989 | help |
e952805d | 990 | GPIO driver for Maxim MAX7301 SPI-based GPIO expander. |
0c36ec31 | 991 | |
e58b9e27 | 992 | config GPIO_MCP23S08 |
752ad5e8 | 993 | tristate "Microchip MCP23xxx I/O expander" |
0f119a84 | 994 | depends on (SPI_MASTER && !I2C) || I2C |
e58b9e27 | 995 | help |
752ad5e8 PK |
996 | SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017 |
997 | I/O expanders. | |
0b7bb77f | 998 | This provides a GPIO interface supporting inputs and outputs. |
4e47f91b | 999 | The I2C versions of the chips can be used as interrupt-controller. |
e58b9e27 | 1000 | |
1e5db006 RR |
1001 | config GPIO_MC33880 |
1002 | tristate "Freescale MC33880 high-side/low-side switch" | |
1003 | depends on SPI_MASTER | |
1004 | help | |
1005 | SPI driver for Freescale MC33880 high-side/low-side switch. | |
1006 | This provides GPIO interface supporting inputs and outputs. | |
1007 | ||
177b0381 | 1008 | endmenu |
25cf2507 | 1009 | |
177b0381 LW |
1010 | menu "USB GPIO expanders" |
1011 | depends on USB | |
9d5b72de LP |
1012 | |
1013 | config GPIO_VIPERBOARD | |
1014 | tristate "Viperboard GPIO a & b support" | |
1015 | depends on MFD_VIPERBOARD && USB | |
1016 | help | |
1017 | Say yes here to access the GPIO signals of Nano River | |
1018 | Technologies Viperboard. There are two GPIO chips on the | |
1019 | board: gpioa and gpiob. | |
1020 | See viperboard API specification and Nano | |
1021 | River Tech's viperboard.h for detailed meaning | |
1022 | of the module parameters. | |
1023 | ||
177b0381 | 1024 | endmenu |
6732127f | 1025 | |
7444a72e | 1026 | endif |