]>
Commit | Line | Data |
---|---|---|
a9c5fff5 | 1 | # |
e849dc04 | 2 | # GPIO infrastructure and drivers |
a9c5fff5 DB |
3 | # |
4 | ||
7563bbf8 MB |
5 | config ARCH_HAVE_CUSTOM_GPIO_H |
6 | bool | |
7 | help | |
8 | Selecting this config option from the architecture Kconfig allows | |
9 | the architecture to provide a custom asm/gpio.h implementation | |
10 | overriding the default implementations. New uses of this are | |
11 | strongly discouraged. | |
12 | ||
7444a72e | 13 | config ARCH_WANT_OPTIONAL_GPIOLIB |
a9c5fff5 | 14 | bool |
7444a72e MB |
15 | help |
16 | Select this config option from the architecture Kconfig, if | |
17 | it is possible to use gpiolib on the architecture, but let the | |
18 | user decide whether to actually build it or not. | |
19 | Select this instead of ARCH_REQUIRE_GPIOLIB, if your architecture does | |
20 | not depend on GPIOs being available, but rather let the user | |
21 | decide whether he needs it or not. | |
22 | ||
23 | config ARCH_REQUIRE_GPIOLIB | |
24 | bool | |
25 | select GPIOLIB | |
a9c5fff5 DB |
26 | help |
27 | Platforms select gpiolib if they use this infrastructure | |
28 | for all their GPIOs, usually starting with ones integrated | |
29 | into SOC processors. | |
7444a72e MB |
30 | Selecting this from the architecture code will cause the gpiolib |
31 | code to always get built in. | |
32 | ||
7444a72e MB |
33 | |
34 | menuconfig GPIOLIB | |
35 | bool "GPIO Support" | |
36 | depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB | |
7444a72e MB |
37 | help |
38 | This enables GPIO support through the generic GPIO library. | |
39 | You only need to enable this, if you also want to enable | |
e849dc04 | 40 | one or more of the GPIO drivers below. |
7444a72e MB |
41 | |
42 | If unsure, say N. | |
a9c5fff5 | 43 | |
7444a72e | 44 | if GPIOLIB |
a9c5fff5 | 45 | |
b69ac524 AC |
46 | config GPIO_DEVRES |
47 | def_bool y | |
48 | depends on HAS_IOMEM | |
49 | ||
f141ed65 GL |
50 | config OF_GPIO |
51 | def_bool y | |
afe760e4 | 52 | depends on OF |
f141ed65 | 53 | |
e29482e8 MN |
54 | config GPIO_ACPI |
55 | def_bool y | |
56 | depends on ACPI | |
57 | ||
14250520 | 58 | config GPIOLIB_IRQCHIP |
fc346270 | 59 | select IRQ_DOMAIN |
14250520 LW |
60 | bool |
61 | ||
a9c5fff5 DB |
62 | config DEBUG_GPIO |
63 | bool "Debug GPIO calls" | |
64 | depends on DEBUG_KERNEL | |
65 | help | |
66 | Say Y here to add some extra checks and diagnostics to GPIO calls. | |
692105b8 ML |
67 | These checks help ensure that GPIOs have been properly initialized |
68 | before they are used, and that sleeping calls are not made from | |
69 | non-sleeping contexts. They can make bitbanged serial protocols | |
a9c5fff5 DB |
70 | slower. The diagnostics help catch the type of setup errors |
71 | that are most common when setting up new platforms or boards. | |
72 | ||
d8f388d8 DB |
73 | config GPIO_SYSFS |
74 | bool "/sys/class/gpio/... (sysfs interface)" | |
4c0ea233 | 75 | depends on SYSFS |
d8f388d8 DB |
76 | help |
77 | Say Y here to add a sysfs interface for GPIOs. | |
78 | ||
79 | This is mostly useful to work around omissions in a system's | |
80 | kernel support. Those are common in custom and semicustom | |
81 | hardware assembled using standard kernels with a minimum of | |
82 | custom patches. In those cases, userspace code may import | |
83 | a given GPIO from the kernel, if no kernel driver requested it. | |
84 | ||
85 | Kernel drivers may also request that a particular GPIO be | |
86 | exported to userspace; this can be useful when debugging. | |
87 | ||
c103de24 GL |
88 | config GPIO_GENERIC |
89 | tristate | |
90 | ||
e849dc04 | 91 | # put drivers in the right section, in alphabetical order |
a9c5fff5 | 92 | |
177b0381 | 93 | # This symbol is selected by both I2C and SPI expanders |
e952805d WS |
94 | config GPIO_MAX730X |
95 | tristate | |
96 | ||
177b0381 | 97 | menu "Memory mapped GPIO drivers" |
0bcb6069 | 98 | |
af0a33e2 AS |
99 | config GPIO_74XX_MMIO |
100 | tristate "GPIO driver for 74xx-ICs with MMIO access" | |
101 | depends on OF_GPIO | |
102 | select GPIO_GENERIC | |
103 | help | |
104 | Say yes here to support GPIO functionality for 74xx-compatible ICs | |
105 | with MMIO access. Compatible models include: | |
106 | 1 bit: 741G125 (Input), 741G74 (Output) | |
107 | 2 bits: 742G125 (Input), 7474 (Output) | |
108 | 4 bits: 74125 (Input), 74175 (Output) | |
109 | 6 bits: 74365 (Input), 74174 (Output) | |
110 | 8 bits: 74244 (Input), 74273 (Output) | |
111 | 16 bits: 741624 (Input), 7416374 (Output) | |
112 | ||
223fa272 LW |
113 | config GPIO_ALTERA |
114 | tristate "Altera GPIO" | |
115 | depends on OF_GPIO | |
223fa272 LW |
116 | select GPIOLIB_IRQCHIP |
117 | help | |
118 | Say Y or M here to build support for the Altera PIO device. | |
119 | ||
120 | If driver is built as a module it will be called gpio-altera. | |
121 | ||
6057d40f YT |
122 | config GPIO_AMDPT |
123 | tristate "AMD Promontory GPIO support" | |
124 | depends on ACPI | |
125 | help | |
126 | driver for GPIO functionality on Promontory IOHub | |
127 | Require ACPI ASL code to enumerate as a platform device. | |
128 | ||
ab32770e AB |
129 | config GPIO_ATH79 |
130 | tristate "Atheros AR71XX/AR724X/AR913X GPIO support" | |
131 | default y if ATH79 | |
409d8783 | 132 | depends on ATH79 || COMPILE_TEST |
ab32770e | 133 | select GPIO_GENERIC |
2b8f89e1 | 134 | select GPIOLIB_IRQCHIP |
ab32770e AB |
135 | help |
136 | Select this option to enable GPIO driver for | |
137 | Atheros AR71XX/AR724X/AR913X SoC devices. | |
138 | ||
ea948cff LW |
139 | config GPIO_BCM_KONA |
140 | bool "Broadcom Kona GPIO" | |
141 | depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST) | |
142 | help | |
143 | Turn on GPIO support for Broadcom "Kona" chips. | |
144 | ||
3b0213d5 GF |
145 | config GPIO_BRCMSTB |
146 | tristate "BRCMSTB GPIO support" | |
a02588a0 FF |
147 | default y if (ARCH_BRCMSTB || BMIPS_GENERIC) |
148 | depends on OF_GPIO && (ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST) | |
3b0213d5 | 149 | select GPIO_GENERIC |
19a7b694 | 150 | select GPIOLIB_IRQCHIP |
3b0213d5 GF |
151 | help |
152 | Say yes here to enable GPIO support for Broadcom STB (BCM7XXX) SoCs. | |
153 | ||
a3b8d4a5 | 154 | config GPIO_CLPS711X |
55fe14ab | 155 | tristate "CLPS711X GPIO support" |
ffd4bf1a | 156 | depends on ARCH_CLPS711X || COMPILE_TEST |
55fe14ab AS |
157 | select GPIO_GENERIC |
158 | help | |
159 | Say yes here to support GPIO on CLPS711X SoCs. | |
a3b8d4a5 | 160 | |
ee89cf63 GS |
161 | config GPIO_DAVINCI |
162 | bool "TI Davinci/Keystone GPIO support" | |
163 | default y if ARCH_DAVINCI | |
164 | depends on ARM && (ARCH_DAVINCI || ARCH_KEYSTONE) | |
165 | help | |
166 | Say yes here to enable GPIO support for TI Davinci/Keystone SoCs. | |
167 | ||
7779b345 JI |
168 | config GPIO_DWAPB |
169 | tristate "Synopsys DesignWare APB GPIO driver" | |
170 | select GPIO_GENERIC | |
171 | select GENERIC_IRQ_CHIP | |
7779b345 JI |
172 | help |
173 | Say Y or M here to build support for the Synopsys DesignWare APB | |
174 | GPIO block. | |
175 | ||
a07e103e MD |
176 | config GPIO_EM |
177 | tristate "Emma Mobile GPIO" | |
b5927854 | 178 | depends on ARM && OF_GPIO |
a07e103e MD |
179 | help |
180 | Say yes here to support GPIO on Renesas Emma Mobile SoCs. | |
181 | ||
c6b52c13 HS |
182 | config GPIO_EP93XX |
183 | def_bool y | |
184 | depends on ARCH_EP93XX | |
1e4c8842 | 185 | select GPIO_GENERIC |
c6b52c13 | 186 | |
d342571e RV |
187 | config GPIO_ETRAXFS |
188 | bool "Axis ETRAX FS General I/O" | |
189 | depends on CRIS || COMPILE_TEST | |
190 | depends on OF | |
191 | select GPIO_GENERIC | |
29b5357d | 192 | select GPIOLIB_IRQCHIP |
d342571e RV |
193 | help |
194 | Say yes here to support the GPIO controller on Axis ETRAX FS SoCs. | |
195 | ||
223fa272 LW |
196 | config GPIO_GE_FPGA |
197 | bool "GE FPGA based GPIO" | |
198 | depends on GE_FPGA | |
199 | select GPIO_GENERIC | |
200 | help | |
201 | Support for common GPIO functionality provided on some GE Single Board | |
202 | Computers. | |
203 | ||
204 | This driver provides basic support (configure as input or output, read | |
205 | and write pin state) for GPIO implemented in a number of GE single | |
206 | board computers. | |
207 | ||
208 | config GPIO_GENERIC_PLATFORM | |
209 | tristate "Generic memory-mapped GPIO controller support (MMIO platform device)" | |
210 | select GPIO_GENERIC | |
211 | help | |
212 | Say yes here to support basic platform_device memory-mapped GPIO controllers. | |
213 | ||
214 | config GPIO_GRGPIO | |
215 | tristate "Aeroflex Gaisler GRGPIO support" | |
216 | depends on OF | |
217 | select GPIO_GENERIC | |
218 | select IRQ_DOMAIN | |
219 | help | |
220 | Select this to support Aeroflex Gaisler GRGPIO cores from the GRLIB | |
221 | VHDL IP core library. | |
222 | ||
223 | config GPIO_ICH | |
224 | tristate "Intel ICH GPIO" | |
225 | depends on PCI && X86 | |
226 | select MFD_CORE | |
227 | select LPC_ICH | |
228 | help | |
229 | Say yes here to support the GPIO functionality of a number of Intel | |
230 | ICH-based chipsets. Currently supported devices: ICH6, ICH7, ICH8 | |
231 | ICH9, ICH10, Series 5/3400 (eg Ibex Peak), Series 6/C200 (eg | |
232 | Cougar Point), NM10 (Tiger Point), and 3100 (Whitmore Lake). | |
233 | ||
234 | If unsure, say N. | |
235 | ||
236 | config GPIO_IOP | |
237 | tristate "Intel IOP GPIO" | |
238 | depends on ARM && (ARCH_IOP32X || ARCH_IOP33X) | |
239 | help | |
240 | Say yes here to support the GPIO functionality of a number of Intel | |
241 | IOP32X or IOP33X. | |
242 | ||
243 | If unsure, say N. | |
244 | ||
223fa272 LW |
245 | config GPIO_LOONGSON |
246 | bool "Loongson-2/3 GPIO support" | |
247 | depends on CPU_LOONGSON2 || CPU_LOONGSON3 | |
248 | help | |
249 | driver for GPIO functionality on Loongson-2F/3A/3B processors. | |
250 | ||
13a43fd9 JE |
251 | config GPIO_LPC18XX |
252 | bool "NXP LPC18XX/43XX GPIO support" | |
253 | default y if ARCH_LPC18XX | |
254 | depends on OF_GPIO && (ARCH_LPC18XX || COMPILE_TEST) | |
255 | help | |
256 | Select this option to enable GPIO driver for | |
257 | NXP LPC18XX/43XX devices. | |
258 | ||
223fa272 LW |
259 | config GPIO_LYNXPOINT |
260 | tristate "Intel Lynxpoint GPIO support" | |
261 | depends on ACPI && X86 | |
262 | select GPIOLIB_IRQCHIP | |
263 | help | |
264 | driver for GPIO functionality on Intel Lynxpoint PCH chipset | |
265 | Requires ACPI device enumeration code to set up a platform device. | |
266 | ||
0da094d8 JB |
267 | config GPIO_MB86S7X |
268 | bool "GPIO support for Fujitsu MB86S7x Platforms" | |
4fccbbde | 269 | depends on ARCH_MB86S7X || COMPILE_TEST |
0da094d8 JB |
270 | help |
271 | Say yes here to support the GPIO controller in Fujitsu MB86S70 SoCs. | |
272 | ||
f436bc27 AW |
273 | config GPIO_MENZ127 |
274 | tristate "MEN 16Z127 GPIO support" | |
275 | depends on MCB | |
276 | select GPIO_GENERIC | |
277 | help | |
278 | Say yes here to support the MEN 16Z127 GPIO Controller | |
279 | ||
223fa272 LW |
280 | config GPIO_MM_LANTIQ |
281 | bool "Lantiq Memory mapped GPIOs" | |
282 | depends on LANTIQ && SOC_XWAY | |
283 | help | |
284 | This enables support for memory mapped GPIOs on the External Bus Unit | |
285 | (EBU) found on Lantiq SoCs. The gpios are output only as they are | |
286 | created by attaching a 16bit latch to the bus. | |
287 | ||
0299b77b JJ |
288 | config GPIO_MOXART |
289 | bool "MOXART GPIO support" | |
24030d9d | 290 | depends on ARCH_MOXART || COMPILE_TEST |
3c01b9a8 | 291 | select GPIO_GENERIC |
0299b77b JJ |
292 | help |
293 | Select this option to enable GPIO driver for | |
294 | MOXA ART SoC devices. | |
295 | ||
6eae1ace GL |
296 | config GPIO_MPC5200 |
297 | def_bool y | |
298 | depends on PPC_MPC52xx | |
299 | ||
c68308dd | 300 | config GPIO_MPC8XXX |
5df7fd46 | 301 | bool "MPC512x/MPC8xxx/QorIQ GPIO support" |
c68308dd | 302 | depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \ |
5df7fd46 LG |
303 | FSL_SOC_BOOKE || PPC_86xx || ARCH_LAYERSCAPE || ARM || \ |
304 | COMPILE_TEST | |
305 | select GPIO_GENERIC | |
c68308dd WS |
306 | help |
307 | Say Y here if you're going to use hardware that connects to the | |
5df7fd46 | 308 | MPC512x/831x/834x/837x/8572/8610/QorIQ GPIOs. |
c68308dd | 309 | |
fefe7b09 TP |
310 | config GPIO_MVEBU |
311 | def_bool y | |
49e928d6 | 312 | depends on PLAT_ORION |
bc1008cf | 313 | depends on OF |
fefe7b09 TP |
314 | select GENERIC_IRQ_CHIP |
315 | ||
d37a65bb SG |
316 | config GPIO_MXC |
317 | def_bool y | |
318 | depends on ARCH_MXC | |
c103de24 | 319 | select GPIO_GENERIC |
e4ea9333 | 320 | select GENERIC_IRQ_CHIP |
c103de24 GL |
321 | |
322 | config GPIO_MXS | |
323 | def_bool y | |
324 | depends on ARCH_MXS | |
06f88a8a | 325 | select GPIO_GENERIC |
498c17cf | 326 | select GENERIC_IRQ_CHIP |
d37a65bb | 327 | |
aca58a66 DD |
328 | config GPIO_OCTEON |
329 | tristate "Cavium OCTEON GPIO" | |
330 | depends on GPIOLIB && CAVIUM_OCTEON_SOC | |
331 | default y | |
332 | help | |
333 | Say yes here to support the on-chip GPIO lines on the OCTEON | |
334 | family of SOCs. | |
335 | ||
cd0a3748 | 336 | config GPIO_OMAP |
cac089f9 | 337 | tristate "TI OMAP GPIO support" if ARCH_OMAP2PLUS || COMPILE_TEST |
cd0a3748 | 338 | default y if ARCH_OMAP |
9d5d96ef AB |
339 | depends on ARM |
340 | select GENERIC_IRQ_CHIP | |
fb655f57 | 341 | select GPIOLIB_IRQCHIP |
cd0a3748 JMC |
342 | help |
343 | Say yes here to enable GPIO support for TI OMAP SoCs. | |
344 | ||
1e9c2859 BS |
345 | config GPIO_PL061 |
346 | bool "PrimeCell PL061 GPIO support" | |
8a242842 | 347 | depends on ARM_AMBA |
a5d6d271 | 348 | select IRQ_DOMAIN |
8d5b24bd | 349 | select GPIOLIB_IRQCHIP |
1e9c2859 BS |
350 | help |
351 | Say yes here to support the PrimeCell PL061 GPIO device | |
352 | ||
157d2644 HZ |
353 | config GPIO_PXA |
354 | bool "PXA GPIO support" | |
355 | depends on ARCH_PXA || ARCH_MMP | |
356 | help | |
357 | Say yes here to support the PXA GPIO device | |
358 | ||
119f5e44 MD |
359 | config GPIO_RCAR |
360 | tristate "Renesas R-Car GPIO" | |
2af66e1d | 361 | depends on ARCH_RENESAS || COMPILE_TEST |
c7f3c5d3 | 362 | select GPIOLIB_IRQCHIP |
119f5e44 MD |
363 | help |
364 | Say yes here to support GPIO on Renesas R-Car SoCs. | |
365 | ||
b53bc281 SH |
366 | config GPIO_SPEAR_SPICS |
367 | bool "ST SPEAr13xx SPI Chip Select as GPIO support" | |
368 | depends on PLAT_SPEAR | |
369 | select GENERIC_IRQ_CHIP | |
370 | help | |
371 | Say yes here to support ST SPEAr SPI Chip Select as GPIO device | |
372 | ||
7b0d44f3 AR |
373 | config GPIO_STA2X11 |
374 | bool "STA2x11/ConneXt GPIO support" | |
375 | depends on MFD_STA2X11 | |
376 | select GENERIC_IRQ_CHIP | |
377 | help | |
378 | Say yes here to support the STA2x11/ConneXt GPIO device. | |
379 | The GPIO module has 128 GPIO pins with alternate functions. | |
380 | ||
be9cab5b LW |
381 | config GPIO_STP_XWAY |
382 | bool "XWAY STP GPIOs" | |
383 | depends on SOC_XWAY | |
384 | help | |
385 | This enables support for the Serial To Parallel (STP) unit found on | |
386 | XWAY SoC. The STP allows the SoC to drive a shift registers cascade, | |
387 | that can be up to 24 bit. This peripheral is aimed at driving leds. | |
388 | Some of the gpios/leds can be auto updated by the soc with dsl and | |
389 | phy status. | |
390 | ||
6a8a0c1d AS |
391 | config GPIO_SYSCON |
392 | tristate "GPIO based on SYSCON" | |
393 | depends on MFD_SYSCON && OF | |
394 | help | |
395 | Say yes here to support GPIO functionality though SYSCON driver. | |
396 | ||
223fa272 LW |
397 | config GPIO_TB10X |
398 | bool | |
399 | select GENERIC_IRQ_CHIP | |
400 | select OF_GPIO | |
401 | ||
5041e791 JG |
402 | config GPIO_TS4800 |
403 | tristate "TS-4800 DIO blocks and compatibles" | |
404 | depends on OF_GPIO | |
6dcfd729 | 405 | depends on SOC_IMX51 || COMPILE_TEST |
5041e791 JG |
406 | select GPIO_GENERIC |
407 | help | |
408 | This driver support TS-4800 FPGA GPIO controllers. | |
409 | ||
9caf1f22 JH |
410 | config GPIO_TZ1090 |
411 | bool "Toumaz Xenif TZ1090 GPIO support" | |
412 | depends on SOC_TZ1090 | |
04777396 | 413 | select GENERIC_IRQ_CHIP |
9caf1f22 JH |
414 | default y |
415 | help | |
416 | Say yes here to support Toumaz Xenif TZ1090 GPIOs. | |
417 | ||
79bb6460 JH |
418 | config GPIO_TZ1090_PDC |
419 | bool "Toumaz Xenif TZ1090 PDC GPIO support" | |
420 | depends on SOC_TZ1090 | |
421 | default y | |
422 | help | |
423 | Say yes here to support Toumaz Xenif TZ1090 PDC GPIOs. | |
424 | ||
7f2691a1 SA |
425 | config GPIO_VF610 |
426 | def_bool y | |
427 | depends on ARCH_MXC && SOC_VF610 | |
428 | select GPIOLIB_IRQCHIP | |
429 | help | |
430 | Say yes here to support Vybrid vf610 GPIOs. | |
431 | ||
223fa272 LW |
432 | config GPIO_VR41XX |
433 | tristate "NEC VR4100 series General-purpose I/O Uint support" | |
434 | depends on CPU_VR41XX | |
435 | help | |
436 | Say yes here to support the NEC VR4100 series General-purpose I/O Uint | |
437 | ||
438 | config GPIO_VX855 | |
439 | tristate "VIA VX855/VX875 GPIO" | |
440 | depends on PCI | |
441 | select MFD_CORE | |
442 | select MFD_VX855 | |
443 | help | |
444 | Support access to the VX855/VX875 GPIO lines through the gpio library. | |
445 | ||
446 | This driver provides common support for accessing the device, | |
447 | additional drivers must be enabled in order to use the | |
448 | functionality of the device. | |
449 | ||
29cbf458 FK |
450 | config GPIO_XGENE |
451 | bool "APM X-Gene GPIO controller support" | |
452 | depends on ARM64 && OF_GPIO | |
453 | help | |
454 | This driver is to support the GPIO block within the APM X-Gene SoC | |
455 | platform's generic flash controller. The GPIO pins are muxed with | |
456 | the generic flash controller's address and data pins. Say yes | |
457 | here to enable the GFC GPIO functionality. | |
458 | ||
b2b35e10 V |
459 | config GPIO_XGENE_SB |
460 | tristate "APM X-Gene GPIO standby controller support" | |
461 | depends on ARCH_XGENE && OF_GPIO | |
462 | select GPIO_GENERIC | |
e5f7e312 | 463 | select GPIOLIB_IRQCHIP |
b2b35e10 V |
464 | help |
465 | This driver supports the GPIO block within the APM X-Gene | |
466 | Standby Domain. Say yes here to enable the GPIO functionality. | |
467 | ||
0bcb6069 | 468 | config GPIO_XILINX |
c54c58ba | 469 | tristate "Xilinx GPIO support" |
79786721 | 470 | depends on OF_GPIO |
0bcb6069 JL |
471 | help |
472 | Say yes here to support the Xilinx FPGA GPIO device | |
473 | ||
ff718800 KP |
474 | config GPIO_XLP |
475 | tristate "Netlogic XLP GPIO support" | |
83ea24fd | 476 | depends on CPU_XLP && OF_GPIO |
ff718800 KP |
477 | select GPIOLIB_IRQCHIP |
478 | help | |
479 | This driver provides support for GPIO interface on Netlogic XLP MIPS64 | |
480 | SoCs. Currently supported XLP variants are XLP8XX, XLP3XX, XLP2XX, | |
481 | XLP9XX and XLP5XX. | |
482 | ||
483 | If unsure, say N. | |
484 | ||
3b31d0ec BS |
485 | config GPIO_XTENSA |
486 | bool "Xtensa GPIO32 support" | |
487 | depends on XTENSA | |
a1a2bdec | 488 | depends on HAVE_XTENSA_GPIO32 |
3b31d0ec BS |
489 | depends on !SMP |
490 | help | |
491 | Say yes here to support the Xtensa internal GPIO32 IMPWIRE (input) | |
492 | and EXPSTATE (output) ports | |
493 | ||
223fa272 LW |
494 | config GPIO_ZEVIO |
495 | bool "LSI ZEVIO SoC memory mapped GPIOs" | |
496 | depends on ARM && OF_GPIO | |
27fdd325 | 497 | help |
223fa272 | 498 | Say yes here to support the GPIO controller in LSI ZEVIO SoCs. |
27fdd325 | 499 | |
223fa272 LW |
500 | config GPIO_ZYNQ |
501 | tristate "Xilinx Zynq GPIO support" | |
bdf7a4ae | 502 | depends on ARCH_ZYNQ || ARCH_ZYNQMP |
7f87210e | 503 | select GPIOLIB_IRQCHIP |
be9b06b2 | 504 | help |
223fa272 | 505 | Say yes here to support Xilinx Zynq GPIO controller. |
92021490 | 506 | |
0963670a LW |
507 | config GPIO_ZX |
508 | bool "ZTE ZX GPIO support" | |
509 | select GPIOLIB_IRQCHIP | |
510 | help | |
511 | Say yes here to support the GPIO device on ZTE ZX SoCs. | |
512 | ||
177b0381 | 513 | endmenu |
be9b06b2 | 514 | |
bc6a73bb | 515 | menu "Port-mapped I/O GPIO drivers" |
7768feb0 | 516 | depends on X86 # Unconditional I/O space access |
bc6a73bb | 517 | |
1b06d64f WBG |
518 | config GPIO_104_DIO_48E |
519 | tristate "ACCES 104-DIO-48E GPIO support" | |
520 | select GPIOLIB_IRQCHIP | |
521 | help | |
522 | Enables GPIO support for the ACCES 104-DIO-48E family. The base port | |
523 | address for the device may be configured via the dio_48e_base module | |
524 | parameter. The interrupt line number for the device may be configured | |
525 | via the dio_48e_irq module parameter. | |
526 | ||
bc6a73bb LW |
527 | config GPIO_104_IDIO_16 |
528 | tristate "ACCES 104-IDIO-16 GPIO support" | |
a1184147 | 529 | select GPIOLIB_IRQCHIP |
bc6a73bb | 530 | help |
a1184147 WBG |
531 | Enables GPIO support for the ACCES 104-IDIO-16 family. The base port |
532 | address for the device may be set via the idio_16_base module | |
533 | parameter. The interrupt line number for the device may be set via the | |
534 | idio_16_irq module parameter. | |
bc6a73bb | 535 | |
6ddcf9b4 WBG |
536 | config GPIO_104_IDI_48 |
537 | tristate "ACCES 104-IDI-48 GPIO support" | |
538 | select GPIOLIB_IRQCHIP | |
539 | help | |
540 | Enables GPIO support for the ACCES 104-IDI-48 family. The base port | |
541 | address for the device may be configured via the idi_48_base module | |
542 | parameter. The interrupt line number for the device may be configured | |
543 | via the idi_48_irq module parameter. | |
544 | ||
bc6a73bb | 545 | config GPIO_F7188X |
1920906f | 546 | tristate "F71869, F71869A, F71882FG, F71889F and F81866 GPIO support" |
bc6a73bb LW |
547 | help |
548 | This option enables support for GPIOs found on Fintek Super-I/O | |
1920906f | 549 | chips F71869, F71869A, F71882FG, F71889F and F81866. |
bc6a73bb LW |
550 | |
551 | To compile this driver as a module, choose M here: the module will | |
552 | be called f7188x-gpio. | |
553 | ||
554 | config GPIO_IT87 | |
555 | tristate "IT87xx GPIO support" | |
bc6a73bb LW |
556 | help |
557 | Say yes here to support GPIO functionality of IT87xx Super I/O chips. | |
558 | ||
559 | This driver is tested with ITE IT8728 and IT8732 Super I/O chips, and | |
560 | supports the IT8761E Super I/O chip as well. | |
561 | ||
562 | To compile this driver as a module, choose M here: the module will | |
563 | be called gpio_it87 | |
564 | ||
565 | config GPIO_SCH | |
566 | tristate "Intel SCH/TunnelCreek/Centerton/Quark X1000 GPIO" | |
7768feb0 | 567 | depends on PCI |
bc6a73bb LW |
568 | select MFD_CORE |
569 | select LPC_SCH | |
570 | help | |
571 | Say yes here to support GPIO interface on Intel Poulsbo SCH, | |
572 | Intel Tunnel Creek processor, Intel Centerton processor or | |
573 | Intel Quark X1000 SoC. | |
574 | ||
575 | The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are | |
576 | powered by the core power rail and are turned off during sleep | |
577 | modes (S3 and higher). The remaining four GPIOs are powered by | |
578 | the Intel SCH suspend power supply. These GPIOs remain | |
579 | active during S3. The suspend powered GPIOs can be used to wake the | |
580 | system from the Suspend-to-RAM state. | |
581 | ||
582 | The Intel Tunnel Creek processor has 5 GPIOs powered by the | |
583 | core power rail and 9 from suspend power supply. | |
584 | ||
585 | The Intel Centerton processor has a total of 30 GPIO pins. | |
586 | Twenty-one are powered by the core power rail and 9 from the | |
587 | suspend power supply. | |
588 | ||
589 | The Intel Quark X1000 SoC has 2 GPIOs powered by the core | |
590 | power well and 6 from the suspend power well. | |
591 | ||
592 | config GPIO_SCH311X | |
593 | tristate "SMSC SCH311x SuperI/O GPIO" | |
594 | help | |
595 | Driver to enable the GPIOs found on SMSC SMSC SCH3112, SCH3114 and | |
596 | SCH3116 "Super I/O" chipsets. | |
597 | ||
598 | To compile this driver as a module, choose M here: the module will | |
599 | be called gpio-sch311x. | |
600 | ||
601 | config GPIO_TS5500 | |
602 | tristate "TS-5500 DIO blocks and compatibles" | |
603 | depends on TS5500 || COMPILE_TEST | |
604 | help | |
605 | This driver supports Digital I/O exposed by pin blocks found on some | |
606 | Technologic Systems platforms. It includes, but is not limited to, 3 | |
607 | blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600 | |
608 | LCD port. | |
609 | ||
9c26df9b WBG |
610 | config GPIO_WS16C48 |
611 | tristate "WinSystems WS16C48 GPIO support" | |
612 | select GPIOLIB_IRQCHIP | |
613 | help | |
614 | Enables GPIO support for the WinSystems WS16C48. The base port address | |
615 | for the device may be configured via the ws16c48_base module | |
616 | parameter. The interrupt line number for the device may be configured | |
617 | via the ws16c48_irq module parameter. | |
618 | ||
bc6a73bb LW |
619 | endmenu |
620 | ||
177b0381 LW |
621 | menu "I2C GPIO expanders" |
622 | depends on I2C | |
92021490 | 623 | |
bf5a16ba LW |
624 | config GPIO_ADP5588 |
625 | tristate "ADP5588 I2C GPIO expander" | |
6ed9f9c4 | 626 | help |
bf5a16ba LW |
627 | This option enables support for 18 GPIOs found |
628 | on Analog Devices ADP5588 GPIO Expanders. | |
be9b06b2 | 629 | |
bf5a16ba LW |
630 | config GPIO_ADP5588_IRQ |
631 | bool "Interrupt controller support for ADP5588" | |
632 | depends on GPIO_ADP5588=y | |
e9004f50 | 633 | help |
bf5a16ba LW |
634 | Say yes here to enable the adp5588 to be used as an interrupt |
635 | controller. It requires the driver to be built in the kernel. | |
31ba56f2 | 636 | |
bf5a16ba LW |
637 | config GPIO_ADNP |
638 | tristate "Avionic Design N-bit GPIO expander" | |
269a46f8 | 639 | depends on OF_GPIO |
104fb1d5 ZL |
640 | select GPIOLIB_IRQCHIP |
641 | help | |
bf5a16ba LW |
642 | This option enables support for N GPIOs found on Avionic Design |
643 | I2C GPIO expanders. The register space will be extended by powers | |
644 | of two, so the controller will need to accommodate for that. For | |
645 | example: if a controller provides 48 pins, 6 registers will be | |
646 | enough to represent all pins, but the driver will assume a | |
647 | register layout for 64 pins (8 registers). | |
0cc59b9d | 648 | |
e952805d WS |
649 | config GPIO_MAX7300 |
650 | tristate "Maxim MAX7300 GPIO expander" | |
e952805d WS |
651 | select GPIO_MAX730X |
652 | help | |
2b861f4b | 653 | GPIO driver for Maxim MAX7300 I2C-based GPIO expander. |
e952805d | 654 | |
bbcd6d54 EM |
655 | config GPIO_MAX732X |
656 | tristate "MAX7319, MAX7320-7327 I2C Port Expanders" | |
bbcd6d54 EM |
657 | help |
658 | Say yes here to support the MAX7319, MAX7320-7327 series of I2C | |
659 | Port Expanders. Each IO port on these chips has a fixed role of | |
660 | Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain | |
661 | Input and Output (designed by 'P'). The combinations are listed | |
662 | below: | |
663 | ||
664 | 8 bits: max7319 (8I), max7320 (8O), max7321 (8P), | |
665 | max7322 (4I4O), max7323 (4P4O) | |
666 | ||
667 | 16 bits: max7324 (8I8O), max7325 (8P8O), | |
668 | max7326 (4I12O), max7327 (4P12O) | |
669 | ||
670 | Board setup code must specify the model to use, and the start | |
671 | number for these GPIOs. | |
672 | ||
a80a0bbe MZ |
673 | config GPIO_MAX732X_IRQ |
674 | bool "Interrupt controller support for MAX732x" | |
0244ad00 | 675 | depends on GPIO_MAX732X=y |
984f6643 | 676 | select GPIOLIB_IRQCHIP |
a80a0bbe MZ |
677 | help |
678 | Say yes here to enable the max732x to be used as an interrupt | |
679 | controller. It requires the driver to be built in the kernel. | |
680 | ||
608589b1 | 681 | config GPIO_MC9S08DZ60 |
682 | bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions" | |
4c30aa33 | 683 | depends on I2C=y && MACH_MX35_3DS |
608589b1 | 684 | help |
685 | Select this to enable the MC9S08DZ60 GPIO driver | |
686 | ||
f3dc3630 | 687 | config GPIO_PCA953X |
eb32b5aa | 688 | tristate "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports" |
9e60fdcf | 689 | help |
7059d4b0 DB |
690 | Say yes here to provide access to several register-oriented |
691 | SMBus I/O expanders, made mostly by NXP or TI. Compatible | |
692 | models include: | |
693 | ||
694 | 4 bits: pca9536, pca9537 | |
695 | ||
c29985dd | 696 | 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554, |
e73760a6 | 697 | pca9556, pca9557, pca9574, tca6408, xra1202 |
7059d4b0 | 698 | |
c29985dd AL |
699 | 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575, |
700 | tca6416 | |
9e60fdcf | 701 | |
1e191695 AS |
702 | 24 bits: tca6424 |
703 | ||
eb32b5aa | 704 | 40 bits: pca9505, pca9698 |
1e191695 | 705 | |
89ea8bbe MZ |
706 | config GPIO_PCA953X_IRQ |
707 | bool "Interrupt controller support for PCA953x" | |
708 | depends on GPIO_PCA953X=y | |
7bcbce55 | 709 | select GPIOLIB_IRQCHIP |
89ea8bbe MZ |
710 | help |
711 | Say yes here to enable the pca953x to be used as an interrupt | |
712 | controller. It requires the driver to be built in the kernel. | |
713 | ||
15fae37d | 714 | config GPIO_PCF857X |
1673ad52 | 715 | tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders" |
a39294bd | 716 | select GPIOLIB_IRQCHIP |
901acf5b | 717 | select IRQ_DOMAIN |
15fae37d DB |
718 | help |
719 | Say yes here to provide access to most "quasi-bidirectional" I2C | |
720 | GPIO expanders used for additional digital outputs or inputs. | |
721 | Most of these parts are from NXP, though TI is a second source for | |
722 | some of them. Compatible models include: | |
723 | ||
724 | 8 bits: pcf8574, pcf8574a, pca8574, pca8574a, | |
1673ad52 DB |
725 | pca9670, pca9672, pca9674, pca9674a, |
726 | max7328, max7329 | |
15fae37d DB |
727 | |
728 | 16 bits: pcf8575, pcf8575c, pca8575, | |
729 | pca9671, pca9673, pca9675 | |
730 | ||
731 | Your board setup code will need to declare the expanders in | |
732 | use, and assign numbers to the GPIOs they expose. Those GPIOs | |
733 | can then be used from drivers and other kernel code, just like | |
734 | other GPIOs, but only accessible from task contexts. | |
735 | ||
736 | This driver provides an in-kernel interface to those GPIOs using | |
737 | platform-neutral GPIO calls. | |
738 | ||
c34f16b7 GB |
739 | config GPIO_SX150X |
740 | bool "Semtech SX150x I2C GPIO expander" | |
741 | depends on I2C=y | |
093e9435 | 742 | select GPIOLIB_IRQCHIP |
c34f16b7 GB |
743 | default n |
744 | help | |
745 | Say yes here to provide support for Semtech SX150-series I2C | |
746 | GPIO expanders. Compatible models include: | |
747 | ||
748 | 8 bits: sx1508q | |
749 | 16 bits: sx1509q | |
750 | ||
b866526d AD |
751 | config GPIO_TPIC2810 |
752 | tristate "TPIC2810 8-Bit I2C GPO expander" | |
753 | help | |
754 | Say yes here to enable the GPO driver for the TI TPIC2810 chip. | |
755 | ||
756 | To compile this driver as a module, choose M here: the module will | |
757 | be called gpio-tpic2810. | |
758 | ||
177b0381 LW |
759 | endmenu |
760 | ||
761 | menu "MFD GPIO expanders" | |
be9cab5b LW |
762 | |
763 | config GPIO_ADP5520 | |
764 | tristate "GPIO Support for ADP5520 PMIC" | |
765 | depends on PMIC_ADP5520 | |
766 | help | |
767 | This option enables support for on-chip GPIO found | |
768 | on Analog Devices ADP5520 PMICs. | |
769 | ||
770 | config GPIO_ARIZONA | |
771 | tristate "Wolfson Microelectronics Arizona class devices" | |
772 | depends on MFD_ARIZONA | |
773 | help | |
774 | Support for GPIOs on Wolfson Arizona class devices. | |
775 | ||
776 | config GPIO_CRYSTAL_COVE | |
777 | tristate "GPIO support for Crystal Cove PMIC" | |
778 | depends on INTEL_SOC_PMIC | |
779 | select GPIOLIB_IRQCHIP | |
780 | help | |
781 | Support for GPIO pins on Crystal Cove PMIC. | |
782 | ||
783 | Say Yes if you have a Intel SoC based tablet with Crystal Cove PMIC | |
784 | inside. | |
785 | ||
786 | This driver can also be built as a module. If so, the module will be | |
787 | called gpio-crystalcove. | |
788 | ||
789 | config GPIO_CS5535 | |
790 | tristate "AMD CS5535/CS5536 GPIO support" | |
791 | depends on MFD_CS5535 | |
792 | help | |
793 | The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that | |
794 | can be used for quite a number of things. The CS5535/6 is found on | |
795 | AMD Geode and Lemote Yeeloong devices. | |
796 | ||
797 | If unsure, say N. | |
798 | ||
799 | config GPIO_DA9052 | |
800 | tristate "Dialog DA9052 GPIO" | |
801 | depends on PMIC_DA9052 | |
802 | help | |
803 | Say yes here to enable the GPIO driver for the DA9052 chip. | |
804 | ||
805 | config GPIO_DA9055 | |
806 | tristate "Dialog Semiconductor DA9055 GPIO" | |
807 | depends on MFD_DA9055 | |
808 | help | |
809 | Say yes here to enable the GPIO driver for the DA9055 chip. | |
810 | ||
811 | The Dialog DA9055 PMIC chip has 3 GPIO pins that can be | |
812 | be controller by this driver. | |
813 | ||
814 | If driver is built as a module it will be called gpio-da9055. | |
815 | ||
816 | config GPIO_DLN2 | |
817 | tristate "Diolan DLN2 GPIO support" | |
818 | depends on MFD_DLN2 | |
819 | select GPIOLIB_IRQCHIP | |
820 | ||
821 | help | |
822 | Select this option to enable GPIO driver for the Diolan DLN2 | |
823 | board. | |
824 | ||
825 | This driver can also be built as a module. If so, the module | |
826 | will be called gpio-dln2. | |
827 | ||
828 | config GPIO_JANZ_TTL | |
829 | tristate "Janz VMOD-TTL Digital IO Module" | |
830 | depends on MFD_JANZ_CMODIO | |
831 | help | |
832 | This enables support for the Janz VMOD-TTL Digital IO module. | |
833 | This driver provides support for driving the pins in output | |
834 | mode only. Input mode is not supported. | |
835 | ||
836 | config GPIO_KEMPLD | |
837 | tristate "Kontron ETX / COMexpress GPIO" | |
838 | depends on MFD_KEMPLD | |
839 | help | |
840 | This enables support for the PLD GPIO interface on some Kontron ETX | |
841 | and COMexpress (ETXexpress) modules. | |
842 | ||
843 | This driver can also be built as a module. If so, the module will be | |
844 | called gpio-kempld. | |
845 | ||
846 | config GPIO_LP3943 | |
847 | tristate "TI/National Semiconductor LP3943 GPIO expander" | |
848 | depends on MFD_LP3943 | |
849 | help | |
850 | GPIO driver for LP3943 MFD. | |
851 | LP3943 can be used as a GPIO expander which provides up to 16 GPIOs. | |
852 | Open drain outputs are required for this usage. | |
853 | ||
854 | config GPIO_MSIC | |
855 | bool "Intel MSIC mixed signal gpio support" | |
856 | depends on MFD_INTEL_MSIC | |
857 | help | |
858 | Enable support for GPIO on intel MSIC controllers found in | |
859 | intel MID devices | |
860 | ||
861 | config GPIO_PALMAS | |
862 | bool "TI PALMAS series PMICs GPIO" | |
863 | depends on MFD_PALMAS | |
864 | help | |
865 | Select this option to enable GPIO driver for the TI PALMAS | |
866 | series chip family. | |
867 | ||
e9fe32bc LD |
868 | config GPIO_RC5T583 |
869 | bool "RICOH RC5T583 GPIO" | |
870 | depends on MFD_RC5T583 | |
871 | help | |
872 | Select this option to enable GPIO driver for the Ricoh RC5T583 | |
873 | chip family. | |
874 | This driver provides the support for driving/reading the gpio pins | |
875 | of RC5T583 device through standard gpio library. | |
876 | ||
03f822f5 RV |
877 | config GPIO_STMPE |
878 | bool "STMPE GPIOs" | |
879 | depends on MFD_STMPE | |
1dfb4a0d | 880 | depends on OF_GPIO |
fe44e70d | 881 | select GPIOLIB_IRQCHIP |
03f822f5 RV |
882 | help |
883 | This enables support for the GPIOs found on the STMPE I/O | |
884 | Expanders. | |
885 | ||
f4e8afdc SI |
886 | config GPIO_TC3589X |
887 | bool "TC3589X GPIOs" | |
888 | depends on MFD_TC3589X | |
1422731d | 889 | depends on OF_GPIO |
cf42f1cf | 890 | select GPIOLIB_IRQCHIP |
d88b25be | 891 | help |
f4e8afdc | 892 | This enables support for the GPIOs found on the TC3589X |
d88b25be RV |
893 | I/O Expander. |
894 | ||
be9cab5b LW |
895 | config GPIO_TIMBERDALE |
896 | bool "Support for timberdale GPIO IP" | |
897 | depends on MFD_TIMBERDALE | |
898 | ---help--- | |
899 | Add support for the GPIO IP in the timberdale FPGA. | |
900 | ||
99f0fd54 AD |
901 | config GPIO_TPS65086 |
902 | tristate "TI TPS65086 GPO" | |
903 | depends on MFD_TPS65086 | |
904 | help | |
905 | This driver supports the GPO on TI TPS65086x PMICs. | |
906 | ||
c366c76a NSJ |
907 | config GPIO_TPS65218 |
908 | tristate "TPS65218 GPIO" | |
909 | depends on MFD_TPS65218 | |
910 | help | |
911 | Select this option to enable GPIO driver for the TPS65218 | |
912 | chip family. | |
913 | ||
be9cab5b LW |
914 | config GPIO_TPS6586X |
915 | bool "TPS6586X GPIO" | |
916 | depends on MFD_TPS6586X | |
917 | help | |
918 | Select this option to enable GPIO driver for the TPS6586X | |
919 | chip family. | |
920 | ||
921 | config GPIO_TPS65910 | |
922 | bool "TPS65910 GPIO" | |
923 | depends on MFD_TPS65910 | |
924 | help | |
925 | Select this option to enable GPIO driver for the TPS65910 | |
926 | chip family. | |
927 | ||
668a6cc7 MO |
928 | config GPIO_TPS65912 |
929 | tristate "TI TPS65912 GPIO" | |
ca801a22 | 930 | depends on MFD_TPS65912 |
668a6cc7 MO |
931 | help |
932 | This driver supports TPS65912 gpio chip | |
933 | ||
e9d35947 DB |
934 | config GPIO_TWL4030 |
935 | tristate "TWL4030, TWL5030, and TPS659x0 GPIOs" | |
936 | depends on TWL4030_CORE | |
937 | help | |
938 | Say yes here to access the GPIO signals of various multi-function | |
939 | power management chips from Texas Instruments. | |
940 | ||
70ffd691 PU |
941 | config GPIO_TWL6040 |
942 | tristate "TWL6040 GPO" | |
943 | depends on TWL6040_CORE | |
944 | help | |
945 | Say yes here to access the GPO signals of twl6040 | |
946 | audio chip from Texas Instruments. | |
947 | ||
be9cab5b LW |
948 | config GPIO_UCB1400 |
949 | tristate "Philips UCB1400 GPIO" | |
950 | depends on UCB1400_CORE | |
951 | help | |
952 | This enables support for the Philips UCB1400 GPIO pins. | |
953 | The UCB1400 is an AC97 audio codec. | |
954 | ||
e4b736f1 MB |
955 | config GPIO_WM831X |
956 | tristate "WM831x GPIOs" | |
957 | depends on MFD_WM831X | |
958 | help | |
959 | Say yes here to access the GPIO signals of WM831x power management | |
960 | chips from Wolfson Microelectronics. | |
961 | ||
38f6ce45 MB |
962 | config GPIO_WM8350 |
963 | tristate "WM8350 GPIOs" | |
964 | depends on MFD_WM8350 | |
965 | help | |
966 | Say yes here to access the GPIO signals of WM8350 power management | |
967 | chips from Wolfson Microelectronics. | |
968 | ||
2955c309 MB |
969 | config GPIO_WM8994 |
970 | tristate "WM8994 GPIOs" | |
971 | depends on MFD_WM8994 | |
972 | help | |
973 | Say yes here to access the GPIO signals of WM8994 audio hub | |
974 | CODECs from Wolfson Microelectronics. | |
975 | ||
177b0381 | 976 | endmenu |
ef72af40 | 977 | |
177b0381 LW |
978 | menu "PCI GPIO expanders" |
979 | depends on PCI | |
459773ae | 980 | |
92c33ef7 LW |
981 | config GPIO_AMD8111 |
982 | tristate "AMD 8111 GPIO driver" | |
5e969a40 | 983 | help |
92c33ef7 | 984 | The AMD 8111 south bridge contains 32 GPIO pins which can be used. |
ff1d5c2f | 985 | |
92c33ef7 LW |
986 | Note, that usually system firmware/ACPI handles GPIO pins on their |
987 | own and users might easily break their systems with uncarefull usage | |
988 | of this driver! | |
5f0a96b0 | 989 | |
92c33ef7 | 990 | If unsure, say N |
5f0a96b0 | 991 | |
ff1d5c2f MB |
992 | config GPIO_BT8XX |
993 | tristate "BT8XX GPIO abuser" | |
03744529 | 994 | depends on VIDEO_BT848=n |
ff1d5c2f | 995 | help |
22520edc | 996 | The BT8xx frame grabber chip has 24 GPIO pins that can be abused |
ff1d5c2f MB |
997 | as a cheap PCI GPIO card. |
998 | ||
999 | This chip can be found on Miro, Hauppauge and STB TV-cards. | |
1000 | ||
1001 | The card needs to be physically altered for using it as a | |
1002 | GPIO card. For more information on how to build a GPIO card | |
1003 | from a BT8xx TV card, see the documentation file at | |
1004 | Documentation/bt8xxgpio.txt | |
1005 | ||
1006 | If unsure, say N. | |
1007 | ||
84743ea3 DC |
1008 | config GPIO_INTEL_MID |
1009 | bool "Intel Mid GPIO support" | |
03744529 | 1010 | depends on X86 |
fc346270 | 1011 | select GPIOLIB_IRQCHIP |
8bf02617 | 1012 | help |
84743ea3 | 1013 | Say Y here to support Intel Mid GPIO. |
8bf02617 | 1014 | |
92c33ef7 LW |
1015 | config GPIO_ML_IOH |
1016 | tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support" | |
92c33ef7 LW |
1017 | select GENERIC_IRQ_CHIP |
1018 | help | |
1019 | ML7213 is companion chip for Intel Atom E6xx series. | |
1020 | This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output | |
1021 | Hub) which is for IVI(In-Vehicle Infotainment) use. | |
1022 | This driver can access the IOH's GPIO device. | |
1023 | ||
04c17aa8 | 1024 | config GPIO_PCH |
868fea05 | 1025 | tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO" |
03744529 | 1026 | depends on X86_32 || MIPS || COMPILE_TEST |
38eb18a6 | 1027 | select GENERIC_IRQ_CHIP |
04c17aa8 TM |
1028 | help |
1029 | This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff | |
1030 | which is an IOH(Input/Output Hub) for x86 embedded processor. | |
1031 | This driver can access PCH GPIO device. | |
1032 | ||
868fea05 TM |
1033 | This driver also can be used for LAPIS Semiconductor IOH(Input/ |
1034 | Output Hub), ML7223 and ML7831. | |
bc786cce | 1035 | ML7223 IOH is for MP(Media Phone) use. |
868fea05 TM |
1036 | ML7831 IOH is for general purpose use. |
1037 | ML7223/ML7831 is companion chip for Intel Atom E6xx series. | |
1038 | ML7223/ML7831 is completely compatible for Intel EG20T PCH. | |
bc786cce | 1039 | |
92c33ef7 LW |
1040 | config GPIO_RDC321X |
1041 | tristate "RDC R-321x GPIO support" | |
92c33ef7 LW |
1042 | select MFD_CORE |
1043 | select MFD_RDC321X | |
49a36793 | 1044 | help |
92c33ef7 LW |
1045 | Support for the RDC R321x SoC GPIOs over southbridge |
1046 | PCI configuration space. | |
49a36793 | 1047 | |
b43ab901 SAS |
1048 | config GPIO_SODAVILLE |
1049 | bool "Intel Sodaville GPIO support" | |
03744529 | 1050 | depends on X86 && OF |
b43ab901 SAS |
1051 | select GPIO_GENERIC |
1052 | select GENERIC_IRQ_CHIP | |
1053 | help | |
1054 | Say Y here to support Intel Sodaville GPIO. | |
1055 | ||
177b0381 | 1056 | endmenu |
35570ac6 | 1057 | |
177b0381 LW |
1058 | menu "SPI GPIO expanders" |
1059 | depends on SPI_MASTER | |
9956d02d | 1060 | |
a7ec2e7f LW |
1061 | config GPIO_74X164 |
1062 | tristate "74x164 serial-in/parallel-out 8-bits shift register" | |
0963670a | 1063 | depends on OF |
a7ec2e7f LW |
1064 | help |
1065 | Driver for 74x164 compatible serial-in/parallel-out 8-outputs | |
1066 | shift registers. This driver can be used to provide access | |
1067 | to more gpio outputs. | |
a9c5fff5 | 1068 | |
0c36ec31 JB |
1069 | config GPIO_MAX7301 |
1070 | tristate "Maxim MAX7301 GPIO expander" | |
e952805d | 1071 | select GPIO_MAX730X |
0c36ec31 | 1072 | help |
e952805d | 1073 | GPIO driver for Maxim MAX7301 SPI-based GPIO expander. |
0c36ec31 | 1074 | |
1e5db006 RR |
1075 | config GPIO_MC33880 |
1076 | tristate "Freescale MC33880 high-side/low-side switch" | |
1e5db006 RR |
1077 | help |
1078 | SPI driver for Freescale MC33880 high-side/low-side switch. | |
1079 | This provides GPIO interface supporting inputs and outputs. | |
1080 | ||
df6df93c AD |
1081 | config GPIO_PISOSR |
1082 | tristate "Generic parallel-in/serial-out shift register" | |
1083 | help | |
1084 | GPIO driver for SPI compatible parallel-in/serial-out shift | |
1085 | registers. These are input only devices. | |
1086 | ||
0963670a LW |
1087 | endmenu |
1088 | ||
1089 | menu "SPI or I2C GPIO expanders" | |
1090 | depends on (SPI_MASTER && !I2C) || I2C | |
1091 | ||
1092 | config GPIO_MCP23S08 | |
1093 | tristate "Microchip MCP23xxx I/O expander" | |
e7aa6d8c | 1094 | help |
0963670a LW |
1095 | SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017 |
1096 | I/O expanders. | |
1097 | This provides a GPIO interface supporting inputs and outputs. | |
1098 | The I2C versions of the chips can be used as interrupt-controller. | |
e7aa6d8c | 1099 | |
177b0381 | 1100 | endmenu |
25cf2507 | 1101 | |
177b0381 LW |
1102 | menu "USB GPIO expanders" |
1103 | depends on USB | |
9d5b72de LP |
1104 | |
1105 | config GPIO_VIPERBOARD | |
1106 | tristate "Viperboard GPIO a & b support" | |
03744529 | 1107 | depends on MFD_VIPERBOARD |
9d5b72de LP |
1108 | help |
1109 | Say yes here to access the GPIO signals of Nano River | |
1110 | Technologies Viperboard. There are two GPIO chips on the | |
1111 | board: gpioa and gpiob. | |
1112 | See viperboard API specification and Nano | |
1113 | River Tech's viperboard.h for detailed meaning | |
1114 | of the module parameters. | |
1115 | ||
177b0381 | 1116 | endmenu |
6732127f | 1117 | |
7444a72e | 1118 | endif |