]>
Commit | Line | Data |
---|---|---|
3242ba11 HK |
1 | /* |
2 | * Xilinx Zynq GPIO device driver | |
3 | * | |
4 | * Copyright (C) 2009 - 2014 Xilinx, Inc. | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify it under | |
7 | * the terms of the GNU General Public License as published by the Free Software | |
8 | * Foundation; either version 2 of the License, or (at your option) any later | |
9 | * version. | |
10 | */ | |
11 | ||
12 | #include <linux/bitops.h> | |
13 | #include <linux/clk.h> | |
14 | #include <linux/gpio/driver.h> | |
15 | #include <linux/init.h> | |
16 | #include <linux/interrupt.h> | |
17 | #include <linux/io.h> | |
18 | #include <linux/module.h> | |
19 | #include <linux/platform_device.h> | |
20 | #include <linux/pm_runtime.h> | |
bdf7a4ae | 21 | #include <linux/of.h> |
3242ba11 HK |
22 | |
23 | #define DRIVER_NAME "zynq-gpio" | |
24 | ||
25 | /* Maximum banks */ | |
26 | #define ZYNQ_GPIO_MAX_BANK 4 | |
bdf7a4ae | 27 | #define ZYNQMP_GPIO_MAX_BANK 6 |
3242ba11 HK |
28 | |
29 | #define ZYNQ_GPIO_BANK0_NGPIO 32 | |
30 | #define ZYNQ_GPIO_BANK1_NGPIO 22 | |
31 | #define ZYNQ_GPIO_BANK2_NGPIO 32 | |
32 | #define ZYNQ_GPIO_BANK3_NGPIO 32 | |
33 | ||
bdf7a4ae AKV |
34 | #define ZYNQMP_GPIO_BANK0_NGPIO 26 |
35 | #define ZYNQMP_GPIO_BANK1_NGPIO 26 | |
36 | #define ZYNQMP_GPIO_BANK2_NGPIO 26 | |
37 | #define ZYNQMP_GPIO_BANK3_NGPIO 32 | |
38 | #define ZYNQMP_GPIO_BANK4_NGPIO 32 | |
39 | #define ZYNQMP_GPIO_BANK5_NGPIO 32 | |
40 | ||
41 | #define ZYNQ_GPIO_NR_GPIOS 118 | |
42 | #define ZYNQMP_GPIO_NR_GPIOS 174 | |
43 | ||
44 | #define ZYNQ_GPIO_BANK0_PIN_MIN(str) 0 | |
45 | #define ZYNQ_GPIO_BANK0_PIN_MAX(str) (ZYNQ_GPIO_BANK0_PIN_MIN(str) + \ | |
46 | ZYNQ##str##_GPIO_BANK0_NGPIO - 1) | |
47 | #define ZYNQ_GPIO_BANK1_PIN_MIN(str) (ZYNQ_GPIO_BANK0_PIN_MAX(str) + 1) | |
48 | #define ZYNQ_GPIO_BANK1_PIN_MAX(str) (ZYNQ_GPIO_BANK1_PIN_MIN(str) + \ | |
49 | ZYNQ##str##_GPIO_BANK1_NGPIO - 1) | |
50 | #define ZYNQ_GPIO_BANK2_PIN_MIN(str) (ZYNQ_GPIO_BANK1_PIN_MAX(str) + 1) | |
51 | #define ZYNQ_GPIO_BANK2_PIN_MAX(str) (ZYNQ_GPIO_BANK2_PIN_MIN(str) + \ | |
52 | ZYNQ##str##_GPIO_BANK2_NGPIO - 1) | |
53 | #define ZYNQ_GPIO_BANK3_PIN_MIN(str) (ZYNQ_GPIO_BANK2_PIN_MAX(str) + 1) | |
54 | #define ZYNQ_GPIO_BANK3_PIN_MAX(str) (ZYNQ_GPIO_BANK3_PIN_MIN(str) + \ | |
55 | ZYNQ##str##_GPIO_BANK3_NGPIO - 1) | |
56 | #define ZYNQ_GPIO_BANK4_PIN_MIN(str) (ZYNQ_GPIO_BANK3_PIN_MAX(str) + 1) | |
57 | #define ZYNQ_GPIO_BANK4_PIN_MAX(str) (ZYNQ_GPIO_BANK4_PIN_MIN(str) + \ | |
58 | ZYNQ##str##_GPIO_BANK4_NGPIO - 1) | |
59 | #define ZYNQ_GPIO_BANK5_PIN_MIN(str) (ZYNQ_GPIO_BANK4_PIN_MAX(str) + 1) | |
60 | #define ZYNQ_GPIO_BANK5_PIN_MAX(str) (ZYNQ_GPIO_BANK5_PIN_MIN(str) + \ | |
61 | ZYNQ##str##_GPIO_BANK5_NGPIO - 1) | |
3242ba11 | 62 | |
3242ba11 HK |
63 | /* Register offsets for the GPIO device */ |
64 | /* LSW Mask & Data -WO */ | |
65 | #define ZYNQ_GPIO_DATA_LSW_OFFSET(BANK) (0x000 + (8 * BANK)) | |
66 | /* MSW Mask & Data -WO */ | |
67 | #define ZYNQ_GPIO_DATA_MSW_OFFSET(BANK) (0x004 + (8 * BANK)) | |
68 | /* Data Register-RW */ | |
06aa0908 | 69 | #define ZYNQ_GPIO_DATA_OFFSET(BANK) (0x040 + (4 * BANK)) |
3242ba11 HK |
70 | #define ZYNQ_GPIO_DATA_RO_OFFSET(BANK) (0x060 + (4 * BANK)) |
71 | /* Direction mode reg-RW */ | |
72 | #define ZYNQ_GPIO_DIRM_OFFSET(BANK) (0x204 + (0x40 * BANK)) | |
73 | /* Output enable reg-RW */ | |
74 | #define ZYNQ_GPIO_OUTEN_OFFSET(BANK) (0x208 + (0x40 * BANK)) | |
75 | /* Interrupt mask reg-RO */ | |
76 | #define ZYNQ_GPIO_INTMASK_OFFSET(BANK) (0x20C + (0x40 * BANK)) | |
77 | /* Interrupt enable reg-WO */ | |
78 | #define ZYNQ_GPIO_INTEN_OFFSET(BANK) (0x210 + (0x40 * BANK)) | |
79 | /* Interrupt disable reg-WO */ | |
80 | #define ZYNQ_GPIO_INTDIS_OFFSET(BANK) (0x214 + (0x40 * BANK)) | |
81 | /* Interrupt status reg-RO */ | |
82 | #define ZYNQ_GPIO_INTSTS_OFFSET(BANK) (0x218 + (0x40 * BANK)) | |
83 | /* Interrupt type reg-RW */ | |
84 | #define ZYNQ_GPIO_INTTYPE_OFFSET(BANK) (0x21C + (0x40 * BANK)) | |
85 | /* Interrupt polarity reg-RW */ | |
86 | #define ZYNQ_GPIO_INTPOL_OFFSET(BANK) (0x220 + (0x40 * BANK)) | |
87 | /* Interrupt on any, reg-RW */ | |
88 | #define ZYNQ_GPIO_INTANY_OFFSET(BANK) (0x224 + (0x40 * BANK)) | |
89 | ||
90 | /* Disable all interrupts mask */ | |
91 | #define ZYNQ_GPIO_IXR_DISABLE_ALL 0xFFFFFFFF | |
92 | ||
93 | /* Mid pin number of a bank */ | |
94 | #define ZYNQ_GPIO_MID_PIN_NUM 16 | |
95 | ||
96 | /* GPIO upper 16 bit mask */ | |
97 | #define ZYNQ_GPIO_UPPER_MASK 0xFFFF0000 | |
98 | ||
3638bd4a SB |
99 | /* set to differentiate zynq from zynqmp, 0=zynqmp, 1=zynq */ |
100 | #define ZYNQ_GPIO_QUIRK_IS_ZYNQ BIT(0) | |
06aa0908 | 101 | #define GPIO_QUIRK_DATA_RO_BUG BIT(1) |
e3296f19 | 102 | |
e11de4de SD |
103 | struct gpio_regs { |
104 | u32 datamsw[ZYNQMP_GPIO_MAX_BANK]; | |
105 | u32 datalsw[ZYNQMP_GPIO_MAX_BANK]; | |
106 | u32 dirm[ZYNQMP_GPIO_MAX_BANK]; | |
107 | u32 outen[ZYNQMP_GPIO_MAX_BANK]; | |
108 | u32 int_en[ZYNQMP_GPIO_MAX_BANK]; | |
109 | u32 int_dis[ZYNQMP_GPIO_MAX_BANK]; | |
110 | u32 int_type[ZYNQMP_GPIO_MAX_BANK]; | |
111 | u32 int_polarity[ZYNQMP_GPIO_MAX_BANK]; | |
112 | u32 int_any[ZYNQMP_GPIO_MAX_BANK]; | |
113 | }; | |
eb73d6ea | 114 | |
3242ba11 HK |
115 | /** |
116 | * struct zynq_gpio - gpio device private data structure | |
117 | * @chip: instance of the gpio_chip | |
118 | * @base_addr: base address of the GPIO device | |
119 | * @clk: clock resource for this controller | |
59e22114 | 120 | * @irq: interrupt for the GPIO device |
bdf7a4ae | 121 | * @p_data: pointer to platform data |
e11de4de | 122 | * @context: context registers |
3242ba11 HK |
123 | */ |
124 | struct zynq_gpio { | |
125 | struct gpio_chip chip; | |
126 | void __iomem *base_addr; | |
127 | struct clk *clk; | |
59e22114 | 128 | int irq; |
bdf7a4ae | 129 | const struct zynq_platform_data *p_data; |
e11de4de | 130 | struct gpio_regs context; |
bdf7a4ae AKV |
131 | }; |
132 | ||
133 | /** | |
134 | * struct zynq_platform_data - zynq gpio platform data structure | |
135 | * @label: string to store in gpio->label | |
6ae5104c | 136 | * @quirks: Flags is used to identify the platform |
bdf7a4ae AKV |
137 | * @ngpio: max number of gpio pins |
138 | * @max_bank: maximum number of gpio banks | |
139 | * @bank_min: this array represents bank's min pin | |
140 | * @bank_max: this array represents bank's max pin | |
6ae5104c | 141 | */ |
bdf7a4ae AKV |
142 | struct zynq_platform_data { |
143 | const char *label; | |
e3296f19 | 144 | u32 quirks; |
bdf7a4ae AKV |
145 | u16 ngpio; |
146 | int max_bank; | |
147 | int bank_min[ZYNQMP_GPIO_MAX_BANK]; | |
148 | int bank_max[ZYNQMP_GPIO_MAX_BANK]; | |
3242ba11 HK |
149 | }; |
150 | ||
6dd85950 LPC |
151 | static struct irq_chip zynq_gpio_level_irqchip; |
152 | static struct irq_chip zynq_gpio_edge_irqchip; | |
fa9795d1 | 153 | |
3638bd4a SB |
154 | /** |
155 | * zynq_gpio_is_zynq - test if HW is zynq or zynqmp | |
156 | * @gpio: Pointer to driver data struct | |
157 | * | |
158 | * Return: 0 if zynqmp, 1 if zynq. | |
159 | */ | |
160 | static int zynq_gpio_is_zynq(struct zynq_gpio *gpio) | |
161 | { | |
162 | return !!(gpio->p_data->quirks & ZYNQ_GPIO_QUIRK_IS_ZYNQ); | |
163 | } | |
164 | ||
06aa0908 SM |
165 | /** |
166 | * gpio_data_ro_bug - test if HW bug exists or not | |
167 | * @gpio: Pointer to driver data struct | |
168 | * | |
169 | * Return: 0 if bug doesnot exist, 1 if bug exists. | |
170 | */ | |
171 | static int gpio_data_ro_bug(struct zynq_gpio *gpio) | |
172 | { | |
173 | return !!(gpio->p_data->quirks & GPIO_QUIRK_DATA_RO_BUG); | |
174 | } | |
175 | ||
3242ba11 HK |
176 | /** |
177 | * zynq_gpio_get_bank_pin - Get the bank number and pin number within that bank | |
178 | * for a given pin in the GPIO device | |
179 | * @pin_num: gpio pin number within the device | |
180 | * @bank_num: an output parameter used to return the bank number of the gpio | |
181 | * pin | |
182 | * @bank_pin_num: an output parameter used to return pin number within a bank | |
183 | * for the given gpio pin | |
6ae5104c | 184 | * @gpio: gpio device data structure |
3242ba11 HK |
185 | * |
186 | * Returns the bank number and pin offset within the bank. | |
187 | */ | |
188 | static inline void zynq_gpio_get_bank_pin(unsigned int pin_num, | |
189 | unsigned int *bank_num, | |
bdf7a4ae AKV |
190 | unsigned int *bank_pin_num, |
191 | struct zynq_gpio *gpio) | |
3242ba11 | 192 | { |
bdf7a4ae AKV |
193 | int bank; |
194 | ||
195 | for (bank = 0; bank < gpio->p_data->max_bank; bank++) { | |
196 | if ((pin_num >= gpio->p_data->bank_min[bank]) && | |
16ee62e5 | 197 | (pin_num <= gpio->p_data->bank_max[bank])) { |
2717cfca NM |
198 | *bank_num = bank; |
199 | *bank_pin_num = pin_num - | |
200 | gpio->p_data->bank_min[bank]; | |
201 | return; | |
bdf7a4ae | 202 | } |
3242ba11 | 203 | } |
3242ba11 | 204 | |
bdf7a4ae AKV |
205 | /* default */ |
206 | WARN(true, "invalid GPIO pin number: %u", pin_num); | |
207 | *bank_num = 0; | |
208 | *bank_pin_num = 0; | |
209 | } | |
016da144 | 210 | |
3242ba11 HK |
211 | /** |
212 | * zynq_gpio_get_value - Get the state of the specified pin of GPIO device | |
213 | * @chip: gpio_chip instance to be worked on | |
214 | * @pin: gpio pin number within the device | |
215 | * | |
216 | * This function reads the state of the specified pin of the GPIO device. | |
217 | * | |
218 | * Return: 0 if the pin is low, 1 if pin is high. | |
219 | */ | |
220 | static int zynq_gpio_get_value(struct gpio_chip *chip, unsigned int pin) | |
221 | { | |
222 | u32 data; | |
223 | unsigned int bank_num, bank_pin_num; | |
31a89447 | 224 | struct zynq_gpio *gpio = gpiochip_get_data(chip); |
3242ba11 | 225 | |
bdf7a4ae | 226 | zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num, gpio); |
3242ba11 | 227 | |
06aa0908 SM |
228 | if (gpio_data_ro_bug(gpio)) { |
229 | if (zynq_gpio_is_zynq(gpio)) { | |
230 | if (bank_num <= 1) { | |
231 | data = readl_relaxed(gpio->base_addr + | |
232 | ZYNQ_GPIO_DATA_RO_OFFSET(bank_num)); | |
233 | } else { | |
234 | data = readl_relaxed(gpio->base_addr + | |
235 | ZYNQ_GPIO_DATA_OFFSET(bank_num)); | |
236 | } | |
237 | } else { | |
238 | if (bank_num <= 2) { | |
239 | data = readl_relaxed(gpio->base_addr + | |
240 | ZYNQ_GPIO_DATA_RO_OFFSET(bank_num)); | |
241 | } else { | |
242 | data = readl_relaxed(gpio->base_addr + | |
243 | ZYNQ_GPIO_DATA_OFFSET(bank_num)); | |
244 | } | |
245 | } | |
246 | } else { | |
247 | data = readl_relaxed(gpio->base_addr + | |
248 | ZYNQ_GPIO_DATA_RO_OFFSET(bank_num)); | |
249 | } | |
3242ba11 HK |
250 | return (data >> bank_pin_num) & 1; |
251 | } | |
252 | ||
253 | /** | |
254 | * zynq_gpio_set_value - Modify the state of the pin with specified value | |
255 | * @chip: gpio_chip instance to be worked on | |
256 | * @pin: gpio pin number within the device | |
257 | * @state: value used to modify the state of the specified pin | |
258 | * | |
259 | * This function calculates the register offset (i.e to lower 16 bits or | |
260 | * upper 16 bits) based on the given pin number and sets the state of a | |
261 | * gpio pin to the specified value. The state is either 0 or non-zero. | |
262 | */ | |
263 | static void zynq_gpio_set_value(struct gpio_chip *chip, unsigned int pin, | |
264 | int state) | |
265 | { | |
266 | unsigned int reg_offset, bank_num, bank_pin_num; | |
31a89447 | 267 | struct zynq_gpio *gpio = gpiochip_get_data(chip); |
3242ba11 | 268 | |
bdf7a4ae | 269 | zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num, gpio); |
3242ba11 HK |
270 | |
271 | if (bank_pin_num >= ZYNQ_GPIO_MID_PIN_NUM) { | |
272 | /* only 16 data bits in bit maskable reg */ | |
273 | bank_pin_num -= ZYNQ_GPIO_MID_PIN_NUM; | |
274 | reg_offset = ZYNQ_GPIO_DATA_MSW_OFFSET(bank_num); | |
275 | } else { | |
276 | reg_offset = ZYNQ_GPIO_DATA_LSW_OFFSET(bank_num); | |
277 | } | |
278 | ||
279 | /* | |
280 | * get the 32 bit value to be written to the mask/data register where | |
281 | * the upper 16 bits is the mask and lower 16 bits is the data | |
282 | */ | |
283 | state = !!state; | |
284 | state = ~(1 << (bank_pin_num + ZYNQ_GPIO_MID_PIN_NUM)) & | |
285 | ((state << bank_pin_num) | ZYNQ_GPIO_UPPER_MASK); | |
286 | ||
287 | writel_relaxed(state, gpio->base_addr + reg_offset); | |
288 | } | |
289 | ||
290 | /** | |
291 | * zynq_gpio_dir_in - Set the direction of the specified GPIO pin as input | |
292 | * @chip: gpio_chip instance to be worked on | |
293 | * @pin: gpio pin number within the device | |
294 | * | |
295 | * This function uses the read-modify-write sequence to set the direction of | |
296 | * the gpio pin as input. | |
297 | * | |
298 | * Return: 0 always | |
299 | */ | |
300 | static int zynq_gpio_dir_in(struct gpio_chip *chip, unsigned int pin) | |
301 | { | |
302 | u32 reg; | |
303 | unsigned int bank_num, bank_pin_num; | |
31a89447 | 304 | struct zynq_gpio *gpio = gpiochip_get_data(chip); |
3242ba11 | 305 | |
bdf7a4ae | 306 | zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num, gpio); |
3242ba11 | 307 | |
e3296f19 NM |
308 | /* |
309 | * On zynq bank 0 pins 7 and 8 are special and cannot be used | |
310 | * as inputs. | |
311 | */ | |
3638bd4a | 312 | if (zynq_gpio_is_zynq(gpio) && bank_num == 0 && |
16ee62e5 | 313 | (bank_pin_num == 7 || bank_pin_num == 8)) |
3242ba11 HK |
314 | return -EINVAL; |
315 | ||
316 | /* clear the bit in direction mode reg to set the pin as input */ | |
317 | reg = readl_relaxed(gpio->base_addr + ZYNQ_GPIO_DIRM_OFFSET(bank_num)); | |
318 | reg &= ~BIT(bank_pin_num); | |
319 | writel_relaxed(reg, gpio->base_addr + ZYNQ_GPIO_DIRM_OFFSET(bank_num)); | |
320 | ||
321 | return 0; | |
322 | } | |
323 | ||
324 | /** | |
325 | * zynq_gpio_dir_out - Set the direction of the specified GPIO pin as output | |
326 | * @chip: gpio_chip instance to be worked on | |
327 | * @pin: gpio pin number within the device | |
328 | * @state: value to be written to specified pin | |
329 | * | |
330 | * This function sets the direction of specified GPIO pin as output, configures | |
331 | * the Output Enable register for the pin and uses zynq_gpio_set to set | |
332 | * the state of the pin to the value specified. | |
333 | * | |
334 | * Return: 0 always | |
335 | */ | |
336 | static int zynq_gpio_dir_out(struct gpio_chip *chip, unsigned int pin, | |
337 | int state) | |
338 | { | |
339 | u32 reg; | |
340 | unsigned int bank_num, bank_pin_num; | |
31a89447 | 341 | struct zynq_gpio *gpio = gpiochip_get_data(chip); |
3242ba11 | 342 | |
bdf7a4ae | 343 | zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num, gpio); |
3242ba11 HK |
344 | |
345 | /* set the GPIO pin as output */ | |
346 | reg = readl_relaxed(gpio->base_addr + ZYNQ_GPIO_DIRM_OFFSET(bank_num)); | |
347 | reg |= BIT(bank_pin_num); | |
348 | writel_relaxed(reg, gpio->base_addr + ZYNQ_GPIO_DIRM_OFFSET(bank_num)); | |
349 | ||
350 | /* configure the output enable reg for the pin */ | |
351 | reg = readl_relaxed(gpio->base_addr + ZYNQ_GPIO_OUTEN_OFFSET(bank_num)); | |
352 | reg |= BIT(bank_pin_num); | |
353 | writel_relaxed(reg, gpio->base_addr + ZYNQ_GPIO_OUTEN_OFFSET(bank_num)); | |
354 | ||
355 | /* set the state of the pin */ | |
356 | zynq_gpio_set_value(chip, pin, state); | |
357 | return 0; | |
358 | } | |
359 | ||
6169005c BM |
360 | /** |
361 | * zynq_gpio_get_direction - Read the direction of the specified GPIO pin | |
362 | * @chip: gpio_chip instance to be worked on | |
363 | * @pin: gpio pin number within the device | |
364 | * | |
365 | * This function returns the direction of the specified GPIO. | |
366 | * | |
367 | * Return: 0 for output, 1 for input | |
368 | */ | |
369 | static int zynq_gpio_get_direction(struct gpio_chip *chip, unsigned int pin) | |
370 | { | |
371 | u32 reg; | |
372 | unsigned int bank_num, bank_pin_num; | |
373 | struct zynq_gpio *gpio = gpiochip_get_data(chip); | |
374 | ||
375 | zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num, gpio); | |
376 | ||
377 | reg = readl_relaxed(gpio->base_addr + ZYNQ_GPIO_DIRM_OFFSET(bank_num)); | |
378 | ||
379 | return !(reg & BIT(bank_pin_num)); | |
380 | } | |
381 | ||
3242ba11 HK |
382 | /** |
383 | * zynq_gpio_irq_mask - Disable the interrupts for a gpio pin | |
384 | * @irq_data: per irq and chip data passed down to chip functions | |
385 | * | |
386 | * This function calculates gpio pin number from irq number and sets the | |
387 | * bit in the Interrupt Disable register of the corresponding bank to disable | |
388 | * interrupts for that pin. | |
389 | */ | |
390 | static void zynq_gpio_irq_mask(struct irq_data *irq_data) | |
391 | { | |
392 | unsigned int device_pin_num, bank_num, bank_pin_num; | |
fa9795d1 | 393 | struct zynq_gpio *gpio = |
31a89447 | 394 | gpiochip_get_data(irq_data_get_irq_chip_data(irq_data)); |
3242ba11 HK |
395 | |
396 | device_pin_num = irq_data->hwirq; | |
bdf7a4ae | 397 | zynq_gpio_get_bank_pin(device_pin_num, &bank_num, &bank_pin_num, gpio); |
3242ba11 HK |
398 | writel_relaxed(BIT(bank_pin_num), |
399 | gpio->base_addr + ZYNQ_GPIO_INTDIS_OFFSET(bank_num)); | |
400 | } | |
401 | ||
402 | /** | |
403 | * zynq_gpio_irq_unmask - Enable the interrupts for a gpio pin | |
404 | * @irq_data: irq data containing irq number of gpio pin for the interrupt | |
405 | * to enable | |
406 | * | |
407 | * This function calculates the gpio pin number from irq number and sets the | |
408 | * bit in the Interrupt Enable register of the corresponding bank to enable | |
409 | * interrupts for that pin. | |
410 | */ | |
411 | static void zynq_gpio_irq_unmask(struct irq_data *irq_data) | |
412 | { | |
413 | unsigned int device_pin_num, bank_num, bank_pin_num; | |
fa9795d1 | 414 | struct zynq_gpio *gpio = |
31a89447 | 415 | gpiochip_get_data(irq_data_get_irq_chip_data(irq_data)); |
3242ba11 HK |
416 | |
417 | device_pin_num = irq_data->hwirq; | |
bdf7a4ae | 418 | zynq_gpio_get_bank_pin(device_pin_num, &bank_num, &bank_pin_num, gpio); |
3242ba11 HK |
419 | writel_relaxed(BIT(bank_pin_num), |
420 | gpio->base_addr + ZYNQ_GPIO_INTEN_OFFSET(bank_num)); | |
421 | } | |
422 | ||
190dc2e6 LPC |
423 | /** |
424 | * zynq_gpio_irq_ack - Acknowledge the interrupt of a gpio pin | |
425 | * @irq_data: irq data containing irq number of gpio pin for the interrupt | |
426 | * to ack | |
427 | * | |
428 | * This function calculates gpio pin number from irq number and sets the bit | |
429 | * in the Interrupt Status Register of the corresponding bank, to ACK the irq. | |
430 | */ | |
431 | static void zynq_gpio_irq_ack(struct irq_data *irq_data) | |
432 | { | |
433 | unsigned int device_pin_num, bank_num, bank_pin_num; | |
fa9795d1 | 434 | struct zynq_gpio *gpio = |
31a89447 | 435 | gpiochip_get_data(irq_data_get_irq_chip_data(irq_data)); |
190dc2e6 LPC |
436 | |
437 | device_pin_num = irq_data->hwirq; | |
bdf7a4ae | 438 | zynq_gpio_get_bank_pin(device_pin_num, &bank_num, &bank_pin_num, gpio); |
190dc2e6 LPC |
439 | writel_relaxed(BIT(bank_pin_num), |
440 | gpio->base_addr + ZYNQ_GPIO_INTSTS_OFFSET(bank_num)); | |
441 | } | |
442 | ||
443 | /** | |
444 | * zynq_gpio_irq_enable - Enable the interrupts for a gpio pin | |
445 | * @irq_data: irq data containing irq number of gpio pin for the interrupt | |
446 | * to enable | |
447 | * | |
20a8a968 | 448 | * Clears the INTSTS bit and unmasks the given interrupt. |
190dc2e6 LPC |
449 | */ |
450 | static void zynq_gpio_irq_enable(struct irq_data *irq_data) | |
451 | { | |
452 | /* | |
453 | * The Zynq GPIO controller does not disable interrupt detection when | |
454 | * the interrupt is masked and only disables the propagation of the | |
455 | * interrupt. This means when the controller detects an interrupt | |
456 | * condition while the interrupt is logically disabled it will propagate | |
457 | * that interrupt event once the interrupt is enabled. This will cause | |
458 | * the interrupt consumer to see spurious interrupts to prevent this | |
459 | * first make sure that the interrupt is not asserted and then enable | |
460 | * it. | |
461 | */ | |
462 | zynq_gpio_irq_ack(irq_data); | |
463 | zynq_gpio_irq_unmask(irq_data); | |
464 | } | |
465 | ||
3242ba11 HK |
466 | /** |
467 | * zynq_gpio_set_irq_type - Set the irq type for a gpio pin | |
468 | * @irq_data: irq data containing irq number of gpio pin | |
469 | * @type: interrupt type that is to be set for the gpio pin | |
470 | * | |
471 | * This function gets the gpio pin number and its bank from the gpio pin number | |
472 | * and configures the INT_TYPE, INT_POLARITY and INT_ANY registers. | |
473 | * | |
474 | * Return: 0, negative error otherwise. | |
475 | * TYPE-EDGE_RISING, INT_TYPE - 1, INT_POLARITY - 1, INT_ANY - 0; | |
476 | * TYPE-EDGE_FALLING, INT_TYPE - 1, INT_POLARITY - 0, INT_ANY - 0; | |
477 | * TYPE-EDGE_BOTH, INT_TYPE - 1, INT_POLARITY - NA, INT_ANY - 1; | |
478 | * TYPE-LEVEL_HIGH, INT_TYPE - 0, INT_POLARITY - 1, INT_ANY - NA; | |
479 | * TYPE-LEVEL_LOW, INT_TYPE - 0, INT_POLARITY - 0, INT_ANY - NA | |
480 | */ | |
481 | static int zynq_gpio_set_irq_type(struct irq_data *irq_data, unsigned int type) | |
482 | { | |
483 | u32 int_type, int_pol, int_any; | |
484 | unsigned int device_pin_num, bank_num, bank_pin_num; | |
fa9795d1 | 485 | struct zynq_gpio *gpio = |
31a89447 | 486 | gpiochip_get_data(irq_data_get_irq_chip_data(irq_data)); |
3242ba11 HK |
487 | |
488 | device_pin_num = irq_data->hwirq; | |
bdf7a4ae | 489 | zynq_gpio_get_bank_pin(device_pin_num, &bank_num, &bank_pin_num, gpio); |
3242ba11 HK |
490 | |
491 | int_type = readl_relaxed(gpio->base_addr + | |
492 | ZYNQ_GPIO_INTTYPE_OFFSET(bank_num)); | |
493 | int_pol = readl_relaxed(gpio->base_addr + | |
494 | ZYNQ_GPIO_INTPOL_OFFSET(bank_num)); | |
495 | int_any = readl_relaxed(gpio->base_addr + | |
496 | ZYNQ_GPIO_INTANY_OFFSET(bank_num)); | |
497 | ||
498 | /* | |
499 | * based on the type requested, configure the INT_TYPE, INT_POLARITY | |
500 | * and INT_ANY registers | |
501 | */ | |
502 | switch (type) { | |
503 | case IRQ_TYPE_EDGE_RISING: | |
504 | int_type |= BIT(bank_pin_num); | |
505 | int_pol |= BIT(bank_pin_num); | |
506 | int_any &= ~BIT(bank_pin_num); | |
507 | break; | |
508 | case IRQ_TYPE_EDGE_FALLING: | |
509 | int_type |= BIT(bank_pin_num); | |
510 | int_pol &= ~BIT(bank_pin_num); | |
511 | int_any &= ~BIT(bank_pin_num); | |
512 | break; | |
513 | case IRQ_TYPE_EDGE_BOTH: | |
514 | int_type |= BIT(bank_pin_num); | |
515 | int_any |= BIT(bank_pin_num); | |
516 | break; | |
517 | case IRQ_TYPE_LEVEL_HIGH: | |
518 | int_type &= ~BIT(bank_pin_num); | |
519 | int_pol |= BIT(bank_pin_num); | |
520 | break; | |
521 | case IRQ_TYPE_LEVEL_LOW: | |
522 | int_type &= ~BIT(bank_pin_num); | |
523 | int_pol &= ~BIT(bank_pin_num); | |
524 | break; | |
525 | default: | |
526 | return -EINVAL; | |
527 | } | |
528 | ||
529 | writel_relaxed(int_type, | |
530 | gpio->base_addr + ZYNQ_GPIO_INTTYPE_OFFSET(bank_num)); | |
531 | writel_relaxed(int_pol, | |
532 | gpio->base_addr + ZYNQ_GPIO_INTPOL_OFFSET(bank_num)); | |
533 | writel_relaxed(int_any, | |
534 | gpio->base_addr + ZYNQ_GPIO_INTANY_OFFSET(bank_num)); | |
6dd85950 | 535 | |
16ee62e5 | 536 | if (type & IRQ_TYPE_LEVEL_MASK) |
47c08462 | 537 | irq_set_chip_handler_name_locked(irq_data, |
16ee62e5 MS |
538 | &zynq_gpio_level_irqchip, |
539 | handle_fasteoi_irq, NULL); | |
540 | else | |
47c08462 | 541 | irq_set_chip_handler_name_locked(irq_data, |
16ee62e5 MS |
542 | &zynq_gpio_edge_irqchip, |
543 | handle_level_irq, NULL); | |
6dd85950 | 544 | |
3242ba11 HK |
545 | return 0; |
546 | } | |
547 | ||
548 | static int zynq_gpio_set_wake(struct irq_data *data, unsigned int on) | |
549 | { | |
fa9795d1 | 550 | struct zynq_gpio *gpio = |
31a89447 | 551 | gpiochip_get_data(irq_data_get_irq_chip_data(data)); |
59e22114 ES |
552 | |
553 | irq_set_irq_wake(gpio->irq, on); | |
3242ba11 HK |
554 | |
555 | return 0; | |
556 | } | |
557 | ||
c2df3de0 TP |
558 | static int zynq_gpio_irq_reqres(struct irq_data *d) |
559 | { | |
560 | struct gpio_chip *chip = irq_data_get_irq_chip_data(d); | |
561 | int ret; | |
562 | ||
563 | ret = pm_runtime_get_sync(chip->parent); | |
564 | if (ret < 0) | |
565 | return ret; | |
566 | ||
567 | return gpiochip_reqres_irq(chip, d->hwirq); | |
568 | } | |
569 | ||
570 | static void zynq_gpio_irq_relres(struct irq_data *d) | |
571 | { | |
572 | struct gpio_chip *chip = irq_data_get_irq_chip_data(d); | |
573 | ||
574 | gpiochip_relres_irq(chip, d->hwirq); | |
575 | pm_runtime_put(chip->parent); | |
576 | } | |
577 | ||
3242ba11 | 578 | /* irq chip descriptor */ |
6dd85950 | 579 | static struct irq_chip zynq_gpio_level_irqchip = { |
3242ba11 | 580 | .name = DRIVER_NAME, |
190dc2e6 | 581 | .irq_enable = zynq_gpio_irq_enable, |
6dd85950 LPC |
582 | .irq_eoi = zynq_gpio_irq_ack, |
583 | .irq_mask = zynq_gpio_irq_mask, | |
584 | .irq_unmask = zynq_gpio_irq_unmask, | |
585 | .irq_set_type = zynq_gpio_set_irq_type, | |
586 | .irq_set_wake = zynq_gpio_set_wake, | |
c2df3de0 TP |
587 | .irq_request_resources = zynq_gpio_irq_reqres, |
588 | .irq_release_resources = zynq_gpio_irq_relres, | |
a1946778 ES |
589 | .flags = IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED | |
590 | IRQCHIP_MASK_ON_SUSPEND, | |
6dd85950 LPC |
591 | }; |
592 | ||
593 | static struct irq_chip zynq_gpio_edge_irqchip = { | |
594 | .name = DRIVER_NAME, | |
595 | .irq_enable = zynq_gpio_irq_enable, | |
596 | .irq_ack = zynq_gpio_irq_ack, | |
3242ba11 HK |
597 | .irq_mask = zynq_gpio_irq_mask, |
598 | .irq_unmask = zynq_gpio_irq_unmask, | |
599 | .irq_set_type = zynq_gpio_set_irq_type, | |
600 | .irq_set_wake = zynq_gpio_set_wake, | |
c2df3de0 TP |
601 | .irq_request_resources = zynq_gpio_irq_reqres, |
602 | .irq_release_resources = zynq_gpio_irq_relres, | |
a1946778 | 603 | .flags = IRQCHIP_MASK_ON_SUSPEND, |
3242ba11 HK |
604 | }; |
605 | ||
5a2533a7 LPC |
606 | static void zynq_gpio_handle_bank_irq(struct zynq_gpio *gpio, |
607 | unsigned int bank_num, | |
608 | unsigned long pending) | |
609 | { | |
bdf7a4ae | 610 | unsigned int bank_offset = gpio->p_data->bank_min[bank_num]; |
f0fbe7bc | 611 | struct irq_domain *irqdomain = gpio->chip.irq.domain; |
5a2533a7 LPC |
612 | int offset; |
613 | ||
614 | if (!pending) | |
615 | return; | |
616 | ||
617 | for_each_set_bit(offset, &pending, 32) { | |
618 | unsigned int gpio_irq; | |
619 | ||
016da144 | 620 | gpio_irq = irq_find_mapping(irqdomain, offset + bank_offset); |
5a2533a7 LPC |
621 | generic_handle_irq(gpio_irq); |
622 | } | |
623 | } | |
624 | ||
3242ba11 HK |
625 | /** |
626 | * zynq_gpio_irqhandler - IRQ handler for the gpio banks of a gpio device | |
3242ba11 HK |
627 | * @desc: irq descriptor instance of the 'irq' |
628 | * | |
629 | * This function reads the Interrupt Status Register of each bank to get the | |
630 | * gpio pin number which has triggered an interrupt. It then acks the triggered | |
631 | * interrupt and calls the pin specific handler set by the higher layer | |
632 | * application for that pin. | |
633 | * Note: A bug is reported if no handler is set for the gpio pin. | |
634 | */ | |
bd0b9ac4 | 635 | static void zynq_gpio_irqhandler(struct irq_desc *desc) |
3242ba11 HK |
636 | { |
637 | u32 int_sts, int_enb; | |
638 | unsigned int bank_num; | |
fa9795d1 | 639 | struct zynq_gpio *gpio = |
31a89447 | 640 | gpiochip_get_data(irq_desc_get_handler_data(desc)); |
3242ba11 HK |
641 | struct irq_chip *irqchip = irq_desc_get_chip(desc); |
642 | ||
643 | chained_irq_enter(irqchip, desc); | |
644 | ||
bdf7a4ae | 645 | for (bank_num = 0; bank_num < gpio->p_data->max_bank; bank_num++) { |
3242ba11 HK |
646 | int_sts = readl_relaxed(gpio->base_addr + |
647 | ZYNQ_GPIO_INTSTS_OFFSET(bank_num)); | |
648 | int_enb = readl_relaxed(gpio->base_addr + | |
649 | ZYNQ_GPIO_INTMASK_OFFSET(bank_num)); | |
5a2533a7 | 650 | zynq_gpio_handle_bank_irq(gpio, bank_num, int_sts & ~int_enb); |
3242ba11 HK |
651 | } |
652 | ||
653 | chained_irq_exit(irqchip, desc); | |
654 | } | |
655 | ||
e11de4de SD |
656 | static void zynq_gpio_save_context(struct zynq_gpio *gpio) |
657 | { | |
658 | unsigned int bank_num; | |
659 | ||
660 | for (bank_num = 0; bank_num < gpio->p_data->max_bank; bank_num++) { | |
661 | gpio->context.datalsw[bank_num] = | |
662 | readl_relaxed(gpio->base_addr + | |
663 | ZYNQ_GPIO_DATA_LSW_OFFSET(bank_num)); | |
664 | gpio->context.datamsw[bank_num] = | |
665 | readl_relaxed(gpio->base_addr + | |
666 | ZYNQ_GPIO_DATA_MSW_OFFSET(bank_num)); | |
667 | gpio->context.dirm[bank_num] = readl_relaxed(gpio->base_addr + | |
668 | ZYNQ_GPIO_DIRM_OFFSET(bank_num)); | |
669 | gpio->context.int_en[bank_num] = readl_relaxed(gpio->base_addr + | |
670 | ZYNQ_GPIO_INTMASK_OFFSET(bank_num)); | |
671 | gpio->context.int_type[bank_num] = | |
672 | readl_relaxed(gpio->base_addr + | |
673 | ZYNQ_GPIO_INTTYPE_OFFSET(bank_num)); | |
674 | gpio->context.int_polarity[bank_num] = | |
675 | readl_relaxed(gpio->base_addr + | |
676 | ZYNQ_GPIO_INTPOL_OFFSET(bank_num)); | |
677 | gpio->context.int_any[bank_num] = | |
678 | readl_relaxed(gpio->base_addr + | |
679 | ZYNQ_GPIO_INTANY_OFFSET(bank_num)); | |
680 | } | |
681 | } | |
682 | ||
683 | static void zynq_gpio_restore_context(struct zynq_gpio *gpio) | |
684 | { | |
685 | unsigned int bank_num; | |
686 | ||
687 | for (bank_num = 0; bank_num < gpio->p_data->max_bank; bank_num++) { | |
688 | writel_relaxed(gpio->context.datalsw[bank_num], | |
689 | gpio->base_addr + | |
690 | ZYNQ_GPIO_DATA_LSW_OFFSET(bank_num)); | |
691 | writel_relaxed(gpio->context.datamsw[bank_num], | |
692 | gpio->base_addr + | |
693 | ZYNQ_GPIO_DATA_MSW_OFFSET(bank_num)); | |
694 | writel_relaxed(gpio->context.dirm[bank_num], | |
695 | gpio->base_addr + | |
696 | ZYNQ_GPIO_DIRM_OFFSET(bank_num)); | |
697 | writel_relaxed(gpio->context.int_en[bank_num], | |
698 | gpio->base_addr + | |
699 | ZYNQ_GPIO_INTEN_OFFSET(bank_num)); | |
700 | writel_relaxed(gpio->context.int_type[bank_num], | |
701 | gpio->base_addr + | |
702 | ZYNQ_GPIO_INTTYPE_OFFSET(bank_num)); | |
703 | writel_relaxed(gpio->context.int_polarity[bank_num], | |
704 | gpio->base_addr + | |
705 | ZYNQ_GPIO_INTPOL_OFFSET(bank_num)); | |
706 | writel_relaxed(gpio->context.int_any[bank_num], | |
707 | gpio->base_addr + | |
708 | ZYNQ_GPIO_INTANY_OFFSET(bank_num)); | |
709 | } | |
710 | } | |
eb73d6ea | 711 | |
3242ba11 HK |
712 | static int __maybe_unused zynq_gpio_suspend(struct device *dev) |
713 | { | |
a76e865e | 714 | struct zynq_gpio *gpio = dev_get_drvdata(dev); |
5e3a8ecd | 715 | struct irq_data *data = irq_get_irq_data(gpio->irq); |
59e22114 | 716 | |
e11de4de SD |
717 | if (!irqd_is_wakeup_set(data)) { |
718 | zynq_gpio_save_context(gpio); | |
3242ba11 | 719 | return pm_runtime_force_suspend(dev); |
e11de4de | 720 | } |
3242ba11 HK |
721 | |
722 | return 0; | |
723 | } | |
724 | ||
725 | static int __maybe_unused zynq_gpio_resume(struct device *dev) | |
726 | { | |
a76e865e | 727 | struct zynq_gpio *gpio = dev_get_drvdata(dev); |
5e3a8ecd | 728 | struct irq_data *data = irq_get_irq_data(gpio->irq); |
e11de4de | 729 | int ret; |
59e22114 | 730 | |
e11de4de SD |
731 | if (!irqd_is_wakeup_set(data)) { |
732 | ret = pm_runtime_force_resume(dev); | |
733 | zynq_gpio_restore_context(gpio); | |
734 | return ret; | |
735 | } | |
3242ba11 HK |
736 | |
737 | return 0; | |
738 | } | |
739 | ||
740 | static int __maybe_unused zynq_gpio_runtime_suspend(struct device *dev) | |
741 | { | |
38ccad02 | 742 | struct zynq_gpio *gpio = dev_get_drvdata(dev); |
3242ba11 HK |
743 | |
744 | clk_disable_unprepare(gpio->clk); | |
745 | ||
746 | return 0; | |
747 | } | |
748 | ||
749 | static int __maybe_unused zynq_gpio_runtime_resume(struct device *dev) | |
750 | { | |
38ccad02 | 751 | struct zynq_gpio *gpio = dev_get_drvdata(dev); |
3242ba11 HK |
752 | |
753 | return clk_prepare_enable(gpio->clk); | |
754 | } | |
755 | ||
2717cfca | 756 | static int zynq_gpio_request(struct gpio_chip *chip, unsigned int offset) |
3242ba11 HK |
757 | { |
758 | int ret; | |
759 | ||
58383c78 | 760 | ret = pm_runtime_get_sync(chip->parent); |
3242ba11 HK |
761 | |
762 | /* | |
763 | * If the device is already active pm_runtime_get() will return 1 on | |
764 | * success, but gpio_request still needs to return 0. | |
765 | */ | |
766 | return ret < 0 ? ret : 0; | |
767 | } | |
768 | ||
2717cfca | 769 | static void zynq_gpio_free(struct gpio_chip *chip, unsigned int offset) |
3242ba11 | 770 | { |
58383c78 | 771 | pm_runtime_put(chip->parent); |
3242ba11 HK |
772 | } |
773 | ||
774 | static const struct dev_pm_ops zynq_gpio_dev_pm_ops = { | |
775 | SET_SYSTEM_SLEEP_PM_OPS(zynq_gpio_suspend, zynq_gpio_resume) | |
6ed23b80 | 776 | SET_RUNTIME_PM_OPS(zynq_gpio_runtime_suspend, |
16ee62e5 | 777 | zynq_gpio_runtime_resume, NULL) |
3242ba11 HK |
778 | }; |
779 | ||
bdf7a4ae AKV |
780 | static const struct zynq_platform_data zynqmp_gpio_def = { |
781 | .label = "zynqmp_gpio", | |
06aa0908 | 782 | .quirks = GPIO_QUIRK_DATA_RO_BUG, |
bdf7a4ae AKV |
783 | .ngpio = ZYNQMP_GPIO_NR_GPIOS, |
784 | .max_bank = ZYNQMP_GPIO_MAX_BANK, | |
785 | .bank_min[0] = ZYNQ_GPIO_BANK0_PIN_MIN(MP), | |
786 | .bank_max[0] = ZYNQ_GPIO_BANK0_PIN_MAX(MP), | |
787 | .bank_min[1] = ZYNQ_GPIO_BANK1_PIN_MIN(MP), | |
788 | .bank_max[1] = ZYNQ_GPIO_BANK1_PIN_MAX(MP), | |
789 | .bank_min[2] = ZYNQ_GPIO_BANK2_PIN_MIN(MP), | |
790 | .bank_max[2] = ZYNQ_GPIO_BANK2_PIN_MAX(MP), | |
791 | .bank_min[3] = ZYNQ_GPIO_BANK3_PIN_MIN(MP), | |
792 | .bank_max[3] = ZYNQ_GPIO_BANK3_PIN_MAX(MP), | |
793 | .bank_min[4] = ZYNQ_GPIO_BANK4_PIN_MIN(MP), | |
794 | .bank_max[4] = ZYNQ_GPIO_BANK4_PIN_MAX(MP), | |
795 | .bank_min[5] = ZYNQ_GPIO_BANK5_PIN_MIN(MP), | |
796 | .bank_max[5] = ZYNQ_GPIO_BANK5_PIN_MAX(MP), | |
797 | }; | |
798 | ||
799 | static const struct zynq_platform_data zynq_gpio_def = { | |
800 | .label = "zynq_gpio", | |
06aa0908 | 801 | .quirks = ZYNQ_GPIO_QUIRK_IS_ZYNQ | GPIO_QUIRK_DATA_RO_BUG, |
bdf7a4ae AKV |
802 | .ngpio = ZYNQ_GPIO_NR_GPIOS, |
803 | .max_bank = ZYNQ_GPIO_MAX_BANK, | |
804 | .bank_min[0] = ZYNQ_GPIO_BANK0_PIN_MIN(), | |
805 | .bank_max[0] = ZYNQ_GPIO_BANK0_PIN_MAX(), | |
806 | .bank_min[1] = ZYNQ_GPIO_BANK1_PIN_MIN(), | |
807 | .bank_max[1] = ZYNQ_GPIO_BANK1_PIN_MAX(), | |
808 | .bank_min[2] = ZYNQ_GPIO_BANK2_PIN_MIN(), | |
809 | .bank_max[2] = ZYNQ_GPIO_BANK2_PIN_MAX(), | |
810 | .bank_min[3] = ZYNQ_GPIO_BANK3_PIN_MIN(), | |
811 | .bank_max[3] = ZYNQ_GPIO_BANK3_PIN_MAX(), | |
812 | }; | |
813 | ||
814 | static const struct of_device_id zynq_gpio_of_match[] = { | |
7808c42b MY |
815 | { .compatible = "xlnx,zynq-gpio-1.0", .data = &zynq_gpio_def }, |
816 | { .compatible = "xlnx,zynqmp-gpio-1.0", .data = &zynqmp_gpio_def }, | |
bdf7a4ae AKV |
817 | { /* end of table */ } |
818 | }; | |
819 | MODULE_DEVICE_TABLE(of, zynq_gpio_of_match); | |
820 | ||
3242ba11 HK |
821 | /** |
822 | * zynq_gpio_probe - Initialization method for a zynq_gpio device | |
823 | * @pdev: platform device instance | |
824 | * | |
825 | * This function allocates memory resources for the gpio device and registers | |
826 | * all the banks of the device. It will also set up interrupts for the gpio | |
827 | * pins. | |
828 | * Note: Interrupts are disabled for all the banks during initialization. | |
829 | * | |
830 | * Return: 0 on success, negative error otherwise. | |
831 | */ | |
832 | static int zynq_gpio_probe(struct platform_device *pdev) | |
833 | { | |
59e22114 | 834 | int ret, bank_num; |
3242ba11 HK |
835 | struct zynq_gpio *gpio; |
836 | struct gpio_chip *chip; | |
837 | struct resource *res; | |
bdf7a4ae | 838 | const struct of_device_id *match; |
3242ba11 HK |
839 | |
840 | gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL); | |
841 | if (!gpio) | |
842 | return -ENOMEM; | |
843 | ||
bdf7a4ae AKV |
844 | match = of_match_node(zynq_gpio_of_match, pdev->dev.of_node); |
845 | if (!match) { | |
846 | dev_err(&pdev->dev, "of_match_node() failed\n"); | |
847 | return -EINVAL; | |
848 | } | |
849 | gpio->p_data = match->data; | |
3242ba11 HK |
850 | platform_set_drvdata(pdev, gpio); |
851 | ||
852 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
853 | gpio->base_addr = devm_ioremap_resource(&pdev->dev, res); | |
854 | if (IS_ERR(gpio->base_addr)) | |
855 | return PTR_ERR(gpio->base_addr); | |
856 | ||
59e22114 ES |
857 | gpio->irq = platform_get_irq(pdev, 0); |
858 | if (gpio->irq < 0) { | |
3242ba11 | 859 | dev_err(&pdev->dev, "invalid IRQ\n"); |
59e22114 | 860 | return gpio->irq; |
3242ba11 HK |
861 | } |
862 | ||
863 | /* configure the gpio chip */ | |
864 | chip = &gpio->chip; | |
bdf7a4ae | 865 | chip->label = gpio->p_data->label; |
3242ba11 | 866 | chip->owner = THIS_MODULE; |
58383c78 | 867 | chip->parent = &pdev->dev; |
3242ba11 HK |
868 | chip->get = zynq_gpio_get_value; |
869 | chip->set = zynq_gpio_set_value; | |
870 | chip->request = zynq_gpio_request; | |
871 | chip->free = zynq_gpio_free; | |
872 | chip->direction_input = zynq_gpio_dir_in; | |
873 | chip->direction_output = zynq_gpio_dir_out; | |
6169005c | 874 | chip->get_direction = zynq_gpio_get_direction; |
060f3ebf | 875 | chip->base = of_alias_get_id(pdev->dev.of_node, "gpio"); |
bdf7a4ae | 876 | chip->ngpio = gpio->p_data->ngpio; |
3242ba11 | 877 | |
3773c195 | 878 | /* Retrieve GPIO clock */ |
3242ba11 HK |
879 | gpio->clk = devm_clk_get(&pdev->dev, NULL); |
880 | if (IS_ERR(gpio->clk)) { | |
881 | dev_err(&pdev->dev, "input clock not found.\n"); | |
882 | return PTR_ERR(gpio->clk); | |
883 | } | |
0f84f29f HG |
884 | ret = clk_prepare_enable(gpio->clk); |
885 | if (ret) { | |
886 | dev_err(&pdev->dev, "Unable to enable clock.\n"); | |
887 | return ret; | |
888 | } | |
3773c195 | 889 | |
0f84f29f | 890 | pm_runtime_set_active(&pdev->dev); |
3773c195 MS |
891 | pm_runtime_enable(&pdev->dev); |
892 | ret = pm_runtime_get_sync(&pdev->dev); | |
893 | if (ret < 0) | |
615d23f8 | 894 | goto err_pm_dis; |
3242ba11 HK |
895 | |
896 | /* report a bug if gpio chip registration fails */ | |
31a89447 | 897 | ret = gpiochip_add_data(chip, gpio); |
3242ba11 HK |
898 | if (ret) { |
899 | dev_err(&pdev->dev, "Failed to add gpio chip\n"); | |
3773c195 | 900 | goto err_pm_put; |
3242ba11 HK |
901 | } |
902 | ||
903 | /* disable interrupts for all banks */ | |
bdf7a4ae | 904 | for (bank_num = 0; bank_num < gpio->p_data->max_bank; bank_num++) |
3242ba11 HK |
905 | writel_relaxed(ZYNQ_GPIO_IXR_DISABLE_ALL, gpio->base_addr + |
906 | ZYNQ_GPIO_INTDIS_OFFSET(bank_num)); | |
907 | ||
6dd85950 LPC |
908 | ret = gpiochip_irqchip_add(chip, &zynq_gpio_edge_irqchip, 0, |
909 | handle_level_irq, IRQ_TYPE_NONE); | |
3242ba11 HK |
910 | if (ret) { |
911 | dev_err(&pdev->dev, "Failed to add irq chip\n"); | |
912 | goto err_rm_gpiochip; | |
913 | } | |
914 | ||
59e22114 | 915 | gpiochip_set_chained_irqchip(chip, &zynq_gpio_edge_irqchip, gpio->irq, |
3242ba11 HK |
916 | zynq_gpio_irqhandler); |
917 | ||
3773c195 | 918 | pm_runtime_put(&pdev->dev); |
3242ba11 | 919 | |
3242ba11 HK |
920 | return 0; |
921 | ||
922 | err_rm_gpiochip: | |
88d5e520 | 923 | gpiochip_remove(chip); |
3773c195 MS |
924 | err_pm_put: |
925 | pm_runtime_put(&pdev->dev); | |
615d23f8 SD |
926 | err_pm_dis: |
927 | pm_runtime_disable(&pdev->dev); | |
0f84f29f | 928 | clk_disable_unprepare(gpio->clk); |
3242ba11 HK |
929 | |
930 | return ret; | |
931 | } | |
932 | ||
933 | /** | |
934 | * zynq_gpio_remove - Driver removal function | |
935 | * @pdev: platform device instance | |
936 | * | |
937 | * Return: 0 always | |
938 | */ | |
939 | static int zynq_gpio_remove(struct platform_device *pdev) | |
940 | { | |
3242ba11 HK |
941 | struct zynq_gpio *gpio = platform_get_drvdata(pdev); |
942 | ||
943 | pm_runtime_get_sync(&pdev->dev); | |
da26d5d8 | 944 | gpiochip_remove(&gpio->chip); |
3242ba11 HK |
945 | clk_disable_unprepare(gpio->clk); |
946 | device_set_wakeup_capable(&pdev->dev, 0); | |
6b956af0 | 947 | pm_runtime_disable(&pdev->dev); |
3242ba11 HK |
948 | return 0; |
949 | } | |
950 | ||
3242ba11 HK |
951 | static struct platform_driver zynq_gpio_driver = { |
952 | .driver = { | |
953 | .name = DRIVER_NAME, | |
3242ba11 HK |
954 | .pm = &zynq_gpio_dev_pm_ops, |
955 | .of_match_table = zynq_gpio_of_match, | |
956 | }, | |
957 | .probe = zynq_gpio_probe, | |
958 | .remove = zynq_gpio_remove, | |
959 | }; | |
960 | ||
961 | /** | |
962 | * zynq_gpio_init - Initial driver registration call | |
963 | * | |
964 | * Return: value from platform_driver_register | |
965 | */ | |
966 | static int __init zynq_gpio_init(void) | |
967 | { | |
968 | return platform_driver_register(&zynq_gpio_driver); | |
969 | } | |
970 | postcore_initcall(zynq_gpio_init); | |
971 | ||
80d2bf55 MY |
972 | static void __exit zynq_gpio_exit(void) |
973 | { | |
974 | platform_driver_unregister(&zynq_gpio_driver); | |
975 | } | |
976 | module_exit(zynq_gpio_exit); | |
977 | ||
3242ba11 HK |
978 | MODULE_AUTHOR("Xilinx Inc."); |
979 | MODULE_DESCRIPTION("Zynq GPIO driver"); | |
980 | MODULE_LICENSE("GPL"); |