]>
Commit | Line | Data |
---|---|---|
e9d35947 DB |
1 | /* |
2 | * twl4030_gpio.c -- access to GPIOs on TWL4030/TPS659x0 chips | |
3 | * | |
4 | * Copyright (C) 2006-2007 Texas Instruments, Inc. | |
5 | * Copyright (C) 2006 MontaVista Software, Inc. | |
6 | * | |
7 | * Code re-arranged and cleaned up by: | |
8 | * Syed Mohammed Khasim <x0khasim@ti.com> | |
9 | * | |
10 | * Initial Code: | |
11 | * Andy Lowe / Nishanth Menon | |
12 | * | |
13 | * This program is free software; you can redistribute it and/or modify | |
14 | * it under the terms of the GNU General Public License as published by | |
15 | * the Free Software Foundation; either version 2 of the License, or | |
16 | * (at your option) any later version. | |
17 | * | |
18 | * This program is distributed in the hope that it will be useful, | |
19 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
20 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
21 | * GNU General Public License for more details. | |
22 | * | |
23 | * You should have received a copy of the GNU General Public License | |
24 | * along with this program; if not, write to the Free Software | |
25 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
26 | */ | |
27 | ||
28 | #include <linux/module.h> | |
29 | #include <linux/init.h> | |
30 | #include <linux/interrupt.h> | |
31 | #include <linux/kthread.h> | |
32 | #include <linux/irq.h> | |
33 | #include <linux/gpio.h> | |
34 | #include <linux/platform_device.h> | |
35 | #include <linux/slab.h> | |
36 | ||
b07682b6 | 37 | #include <linux/i2c/twl.h> |
e9d35947 DB |
38 | |
39 | ||
40 | /* | |
41 | * The GPIO "subchip" supports 18 GPIOs which can be configured as | |
42 | * inputs or outputs, with pullups or pulldowns on each pin. Each | |
43 | * GPIO can trigger interrupts on either or both edges. | |
44 | * | |
45 | * GPIO interrupts can be fed to either of two IRQ lines; this is | |
46 | * intended to support multiple hosts. | |
47 | * | |
48 | * There are also two LED pins used sometimes as output-only GPIOs. | |
49 | */ | |
50 | ||
51 | ||
52 | static struct gpio_chip twl_gpiochip; | |
53 | static int twl4030_gpio_irq_base; | |
54 | ||
55 | /* genirq interfaces are not available to modules */ | |
56 | #ifdef MODULE | |
57 | #define is_module() true | |
58 | #else | |
59 | #define is_module() false | |
60 | #endif | |
61 | ||
62 | /* GPIO_CTRL Fields */ | |
63 | #define MASK_GPIO_CTRL_GPIO0CD1 BIT(0) | |
64 | #define MASK_GPIO_CTRL_GPIO1CD2 BIT(1) | |
65 | #define MASK_GPIO_CTRL_GPIO_ON BIT(2) | |
66 | ||
67 | /* Mask for GPIO registers when aggregated into a 32-bit integer */ | |
68 | #define GPIO_32_MASK 0x0003ffff | |
69 | ||
70 | /* Data structures */ | |
71 | static DEFINE_MUTEX(gpio_lock); | |
72 | ||
73 | /* store usage of each GPIO. - each bit represents one GPIO */ | |
74 | static unsigned int gpio_usage_count; | |
75 | ||
76 | /*----------------------------------------------------------------------*/ | |
77 | ||
78 | /* | |
79 | * To configure TWL4030 GPIO module registers | |
80 | */ | |
81 | static inline int gpio_twl4030_write(u8 address, u8 data) | |
82 | { | |
fc7b92fc | 83 | return twl_i2c_write_u8(TWL4030_MODULE_GPIO, data, address); |
e9d35947 DB |
84 | } |
85 | ||
86 | /*----------------------------------------------------------------------*/ | |
87 | ||
88 | /* | |
89 | * LED register offsets (use TWL4030_MODULE_{LED,PWMA,PWMB})) | |
90 | * PWMs A and B are dedicated to LEDs A and B, respectively. | |
91 | */ | |
92 | ||
93 | #define TWL4030_LED_LEDEN 0x0 | |
94 | ||
95 | /* LEDEN bits */ | |
96 | #define LEDEN_LEDAON BIT(0) | |
97 | #define LEDEN_LEDBON BIT(1) | |
98 | #define LEDEN_LEDAEXT BIT(2) | |
99 | #define LEDEN_LEDBEXT BIT(3) | |
100 | #define LEDEN_LEDAPWM BIT(4) | |
101 | #define LEDEN_LEDBPWM BIT(5) | |
102 | #define LEDEN_PWM_LENGTHA BIT(6) | |
103 | #define LEDEN_PWM_LENGTHB BIT(7) | |
104 | ||
105 | #define TWL4030_PWMx_PWMxON 0x0 | |
106 | #define TWL4030_PWMx_PWMxOFF 0x1 | |
107 | ||
108 | #define PWMxON_LENGTH BIT(7) | |
109 | ||
110 | /*----------------------------------------------------------------------*/ | |
111 | ||
112 | /* | |
113 | * To read a TWL4030 GPIO module register | |
114 | */ | |
115 | static inline int gpio_twl4030_read(u8 address) | |
116 | { | |
117 | u8 data; | |
118 | int ret = 0; | |
119 | ||
fc7b92fc | 120 | ret = twl_i2c_read_u8(TWL4030_MODULE_GPIO, &data, address); |
e9d35947 DB |
121 | return (ret < 0) ? ret : data; |
122 | } | |
123 | ||
124 | /*----------------------------------------------------------------------*/ | |
125 | ||
126 | static u8 cached_leden; /* protected by gpio_lock */ | |
127 | ||
128 | /* The LED lines are open drain outputs ... a FET pulls to GND, so an | |
129 | * external pullup is needed. We could also expose the integrated PWM | |
130 | * as a LED brightness control; we initialize it as "always on". | |
131 | */ | |
132 | static void twl4030_led_set_value(int led, int value) | |
133 | { | |
134 | u8 mask = LEDEN_LEDAON | LEDEN_LEDAPWM; | |
135 | int status; | |
136 | ||
137 | if (led) | |
138 | mask <<= 1; | |
139 | ||
140 | mutex_lock(&gpio_lock); | |
141 | if (value) | |
142 | cached_leden &= ~mask; | |
143 | else | |
144 | cached_leden |= mask; | |
fc7b92fc | 145 | status = twl_i2c_write_u8(TWL4030_MODULE_LED, cached_leden, |
e9d35947 DB |
146 | TWL4030_LED_LEDEN); |
147 | mutex_unlock(&gpio_lock); | |
148 | } | |
149 | ||
150 | static int twl4030_set_gpio_direction(int gpio, int is_input) | |
151 | { | |
152 | u8 d_bnk = gpio >> 3; | |
153 | u8 d_msk = BIT(gpio & 0x7); | |
154 | u8 reg = 0; | |
155 | u8 base = REG_GPIODATADIR1 + d_bnk; | |
156 | int ret = 0; | |
157 | ||
158 | mutex_lock(&gpio_lock); | |
159 | ret = gpio_twl4030_read(base); | |
160 | if (ret >= 0) { | |
161 | if (is_input) | |
162 | reg = ret & ~d_msk; | |
163 | else | |
164 | reg = ret | d_msk; | |
165 | ||
166 | ret = gpio_twl4030_write(base, reg); | |
167 | } | |
168 | mutex_unlock(&gpio_lock); | |
169 | return ret; | |
170 | } | |
171 | ||
172 | static int twl4030_set_gpio_dataout(int gpio, int enable) | |
173 | { | |
174 | u8 d_bnk = gpio >> 3; | |
175 | u8 d_msk = BIT(gpio & 0x7); | |
176 | u8 base = 0; | |
177 | ||
178 | if (enable) | |
179 | base = REG_SETGPIODATAOUT1 + d_bnk; | |
180 | else | |
181 | base = REG_CLEARGPIODATAOUT1 + d_bnk; | |
182 | ||
183 | return gpio_twl4030_write(base, d_msk); | |
184 | } | |
185 | ||
186 | static int twl4030_get_gpio_datain(int gpio) | |
187 | { | |
188 | u8 d_bnk = gpio >> 3; | |
189 | u8 d_off = gpio & 0x7; | |
190 | u8 base = 0; | |
191 | int ret = 0; | |
192 | ||
193 | if (unlikely((gpio >= TWL4030_GPIO_MAX) | |
194 | || !(gpio_usage_count & BIT(gpio)))) | |
195 | return -EPERM; | |
196 | ||
197 | base = REG_GPIODATAIN1 + d_bnk; | |
198 | ret = gpio_twl4030_read(base); | |
199 | if (ret > 0) | |
200 | ret = (ret >> d_off) & 0x1; | |
201 | ||
202 | return ret; | |
203 | } | |
204 | ||
e9d35947 DB |
205 | /*----------------------------------------------------------------------*/ |
206 | ||
207 | static int twl_request(struct gpio_chip *chip, unsigned offset) | |
208 | { | |
209 | int status = 0; | |
210 | ||
211 | mutex_lock(&gpio_lock); | |
212 | ||
213 | /* Support the two LED outputs as output-only GPIOs. */ | |
214 | if (offset >= TWL4030_GPIO_MAX) { | |
215 | u8 ledclr_mask = LEDEN_LEDAON | LEDEN_LEDAEXT | |
216 | | LEDEN_LEDAPWM | LEDEN_PWM_LENGTHA; | |
217 | u8 module = TWL4030_MODULE_PWMA; | |
218 | ||
219 | offset -= TWL4030_GPIO_MAX; | |
220 | if (offset) { | |
221 | ledclr_mask <<= 1; | |
222 | module = TWL4030_MODULE_PWMB; | |
223 | } | |
224 | ||
225 | /* initialize PWM to always-drive */ | |
fc7b92fc | 226 | status = twl_i2c_write_u8(module, 0x7f, |
e9d35947 DB |
227 | TWL4030_PWMx_PWMxOFF); |
228 | if (status < 0) | |
229 | goto done; | |
fc7b92fc | 230 | status = twl_i2c_write_u8(module, 0x7f, |
e9d35947 DB |
231 | TWL4030_PWMx_PWMxON); |
232 | if (status < 0) | |
233 | goto done; | |
234 | ||
235 | /* init LED to not-driven (high) */ | |
236 | module = TWL4030_MODULE_LED; | |
fc7b92fc | 237 | status = twl_i2c_read_u8(module, &cached_leden, |
e9d35947 DB |
238 | TWL4030_LED_LEDEN); |
239 | if (status < 0) | |
240 | goto done; | |
241 | cached_leden &= ~ledclr_mask; | |
fc7b92fc | 242 | status = twl_i2c_write_u8(module, cached_leden, |
e9d35947 DB |
243 | TWL4030_LED_LEDEN); |
244 | if (status < 0) | |
245 | goto done; | |
246 | ||
247 | status = 0; | |
248 | goto done; | |
249 | } | |
250 | ||
251 | /* on first use, turn GPIO module "on" */ | |
252 | if (!gpio_usage_count) { | |
253 | struct twl4030_gpio_platform_data *pdata; | |
254 | u8 value = MASK_GPIO_CTRL_GPIO_ON; | |
255 | ||
256 | /* optionally have the first two GPIOs switch vMMC1 | |
257 | * and vMMC2 power supplies based on card presence. | |
258 | */ | |
259 | pdata = chip->dev->platform_data; | |
260 | value |= pdata->mmc_cd & 0x03; | |
261 | ||
262 | status = gpio_twl4030_write(REG_GPIO_CTRL, value); | |
263 | } | |
264 | ||
265 | if (!status) | |
266 | gpio_usage_count |= (0x1 << offset); | |
267 | ||
268 | done: | |
269 | mutex_unlock(&gpio_lock); | |
270 | return status; | |
271 | } | |
272 | ||
273 | static void twl_free(struct gpio_chip *chip, unsigned offset) | |
274 | { | |
275 | if (offset >= TWL4030_GPIO_MAX) { | |
276 | twl4030_led_set_value(offset - TWL4030_GPIO_MAX, 1); | |
277 | return; | |
278 | } | |
279 | ||
280 | mutex_lock(&gpio_lock); | |
281 | ||
282 | gpio_usage_count &= ~BIT(offset); | |
283 | ||
284 | /* on last use, switch off GPIO module */ | |
285 | if (!gpio_usage_count) | |
286 | gpio_twl4030_write(REG_GPIO_CTRL, 0x0); | |
287 | ||
288 | mutex_unlock(&gpio_lock); | |
289 | } | |
290 | ||
291 | static int twl_direction_in(struct gpio_chip *chip, unsigned offset) | |
292 | { | |
293 | return (offset < TWL4030_GPIO_MAX) | |
294 | ? twl4030_set_gpio_direction(offset, 1) | |
295 | : -EINVAL; | |
296 | } | |
297 | ||
298 | static int twl_get(struct gpio_chip *chip, unsigned offset) | |
299 | { | |
300 | int status = 0; | |
301 | ||
302 | if (offset < TWL4030_GPIO_MAX) | |
303 | status = twl4030_get_gpio_datain(offset); | |
304 | else if (offset == TWL4030_GPIO_MAX) | |
305 | status = cached_leden & LEDEN_LEDAON; | |
306 | else | |
307 | status = cached_leden & LEDEN_LEDBON; | |
308 | return (status < 0) ? 0 : status; | |
309 | } | |
310 | ||
311 | static int twl_direction_out(struct gpio_chip *chip, unsigned offset, int value) | |
312 | { | |
313 | if (offset < TWL4030_GPIO_MAX) { | |
314 | twl4030_set_gpio_dataout(offset, value); | |
315 | return twl4030_set_gpio_direction(offset, 0); | |
316 | } else { | |
317 | twl4030_led_set_value(offset - TWL4030_GPIO_MAX, value); | |
318 | return 0; | |
319 | } | |
320 | } | |
321 | ||
322 | static void twl_set(struct gpio_chip *chip, unsigned offset, int value) | |
323 | { | |
324 | if (offset < TWL4030_GPIO_MAX) | |
325 | twl4030_set_gpio_dataout(offset, value); | |
326 | else | |
327 | twl4030_led_set_value(offset - TWL4030_GPIO_MAX, value); | |
328 | } | |
329 | ||
330 | static int twl_to_irq(struct gpio_chip *chip, unsigned offset) | |
331 | { | |
332 | return (twl4030_gpio_irq_base && (offset < TWL4030_GPIO_MAX)) | |
333 | ? (twl4030_gpio_irq_base + offset) | |
334 | : -EINVAL; | |
335 | } | |
336 | ||
337 | static struct gpio_chip twl_gpiochip = { | |
338 | .label = "twl4030", | |
339 | .owner = THIS_MODULE, | |
340 | .request = twl_request, | |
341 | .free = twl_free, | |
342 | .direction_input = twl_direction_in, | |
343 | .get = twl_get, | |
344 | .direction_output = twl_direction_out, | |
345 | .set = twl_set, | |
346 | .to_irq = twl_to_irq, | |
347 | .can_sleep = 1, | |
348 | }; | |
349 | ||
350 | /*----------------------------------------------------------------------*/ | |
351 | ||
352 | static int __devinit gpio_twl4030_pulls(u32 ups, u32 downs) | |
353 | { | |
354 | u8 message[6]; | |
355 | unsigned i, gpio_bit; | |
356 | ||
357 | /* For most pins, a pulldown was enabled by default. | |
358 | * We should have data that's specific to this board. | |
359 | */ | |
360 | for (gpio_bit = 1, i = 1; i < 6; i++) { | |
361 | u8 bit_mask; | |
362 | unsigned j; | |
363 | ||
364 | for (bit_mask = 0, j = 0; j < 8; j += 2, gpio_bit <<= 1) { | |
365 | if (ups & gpio_bit) | |
366 | bit_mask |= 1 << (j + 1); | |
367 | else if (downs & gpio_bit) | |
368 | bit_mask |= 1 << (j + 0); | |
369 | } | |
370 | message[i] = bit_mask; | |
371 | } | |
372 | ||
fc7b92fc | 373 | return twl_i2c_write(TWL4030_MODULE_GPIO, message, |
e9d35947 DB |
374 | REG_GPIOPUPDCTR1, 5); |
375 | } | |
376 | ||
cabb3fc4 DB |
377 | static int __devinit gpio_twl4030_debounce(u32 debounce, u8 mmc_cd) |
378 | { | |
379 | u8 message[4]; | |
380 | ||
381 | /* 30 msec of debouncing is always used for MMC card detect, | |
382 | * and is optional for everything else. | |
383 | */ | |
384 | message[1] = (debounce & 0xff) | (mmc_cd & 0x03); | |
385 | debounce >>= 8; | |
386 | message[2] = (debounce & 0xff); | |
387 | debounce >>= 8; | |
388 | message[3] = (debounce & 0x03); | |
389 | ||
fc7b92fc | 390 | return twl_i2c_write(TWL4030_MODULE_GPIO, message, |
cabb3fc4 DB |
391 | REG_GPIO_DEBEN1, 3); |
392 | } | |
393 | ||
e9d35947 DB |
394 | static int gpio_twl4030_remove(struct platform_device *pdev); |
395 | ||
396 | static int __devinit gpio_twl4030_probe(struct platform_device *pdev) | |
397 | { | |
398 | struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data; | |
399 | int ret; | |
400 | ||
401 | /* maybe setup IRQs */ | |
402 | if (pdata->irq_base) { | |
403 | if (is_module()) { | |
404 | dev_err(&pdev->dev, | |
405 | "can't dispatch IRQs from modules\n"); | |
406 | goto no_irqs; | |
407 | } | |
408 | ret = twl4030_sih_setup(TWL4030_MODULE_GPIO); | |
409 | if (ret < 0) | |
410 | return ret; | |
411 | WARN_ON(ret != pdata->irq_base); | |
412 | twl4030_gpio_irq_base = ret; | |
413 | } | |
414 | ||
415 | no_irqs: | |
416 | /* | |
417 | * NOTE: boards may waste power if they don't set pullups | |
418 | * and pulldowns correctly ... default for non-ULPI pins is | |
419 | * pulldown, and some other pins may have external pullups | |
420 | * or pulldowns. Careful! | |
421 | */ | |
422 | ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns); | |
423 | if (ret) | |
424 | dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n", | |
425 | pdata->pullups, pdata->pulldowns, | |
426 | ret); | |
427 | ||
cabb3fc4 DB |
428 | ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd); |
429 | if (ret) | |
430 | dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n", | |
431 | pdata->debounce, pdata->mmc_cd, | |
432 | ret); | |
433 | ||
e9d35947 DB |
434 | twl_gpiochip.base = pdata->gpio_base; |
435 | twl_gpiochip.ngpio = TWL4030_GPIO_MAX; | |
436 | twl_gpiochip.dev = &pdev->dev; | |
437 | ||
438 | /* NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE, | |
439 | * is (still) clear if use_leds is set. | |
440 | */ | |
441 | if (pdata->use_leds) | |
442 | twl_gpiochip.ngpio += 2; | |
443 | ||
444 | ret = gpiochip_add(&twl_gpiochip); | |
445 | if (ret < 0) { | |
446 | dev_err(&pdev->dev, | |
447 | "could not register gpiochip, %d\n", | |
448 | ret); | |
449 | twl_gpiochip.ngpio = 0; | |
450 | gpio_twl4030_remove(pdev); | |
451 | } else if (pdata->setup) { | |
452 | int status; | |
453 | ||
454 | status = pdata->setup(&pdev->dev, | |
455 | pdata->gpio_base, TWL4030_GPIO_MAX); | |
456 | if (status) | |
457 | dev_dbg(&pdev->dev, "setup --> %d\n", status); | |
458 | } | |
459 | ||
460 | return ret; | |
461 | } | |
462 | ||
46c529cf MF |
463 | /* Cannot use __devexit as gpio_twl4030_probe() calls us */ |
464 | static int gpio_twl4030_remove(struct platform_device *pdev) | |
e9d35947 DB |
465 | { |
466 | struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data; | |
467 | int status; | |
468 | ||
469 | if (pdata->teardown) { | |
470 | status = pdata->teardown(&pdev->dev, | |
471 | pdata->gpio_base, TWL4030_GPIO_MAX); | |
472 | if (status) { | |
473 | dev_dbg(&pdev->dev, "teardown --> %d\n", status); | |
474 | return status; | |
475 | } | |
476 | } | |
477 | ||
478 | status = gpiochip_remove(&twl_gpiochip); | |
479 | if (status < 0) | |
480 | return status; | |
481 | ||
482 | if (is_module()) | |
483 | return 0; | |
484 | ||
485 | /* REVISIT no support yet for deregistering all the IRQs */ | |
486 | WARN_ON(1); | |
487 | return -EIO; | |
488 | } | |
489 | ||
490 | /* Note: this hardware lives inside an I2C-based multi-function device. */ | |
491 | MODULE_ALIAS("platform:twl4030_gpio"); | |
492 | ||
493 | static struct platform_driver gpio_twl4030_driver = { | |
494 | .driver.name = "twl4030_gpio", | |
495 | .driver.owner = THIS_MODULE, | |
496 | .probe = gpio_twl4030_probe, | |
46c529cf | 497 | .remove = gpio_twl4030_remove, |
e9d35947 DB |
498 | }; |
499 | ||
500 | static int __init gpio_twl4030_init(void) | |
501 | { | |
502 | return platform_driver_register(&gpio_twl4030_driver); | |
503 | } | |
504 | subsys_initcall(gpio_twl4030_init); | |
505 | ||
506 | static void __exit gpio_twl4030_exit(void) | |
507 | { | |
508 | platform_driver_unregister(&gpio_twl4030_driver); | |
509 | } | |
510 | module_exit(gpio_twl4030_exit); | |
511 | ||
512 | MODULE_AUTHOR("Texas Instruments, Inc."); | |
513 | MODULE_DESCRIPTION("GPIO interface for TWL4030"); | |
514 | MODULE_LICENSE("GPL"); |