]>
Commit | Line | Data |
---|---|---|
7434a255 TR |
1 | /* |
2 | * | |
3 | * Copyright (c) 2012 Gilles Dartiguelongue, Thomas Richter | |
4 | * | |
5 | * All Rights Reserved. | |
6 | * | |
7 | * Permission is hereby granted, free of charge, to any person obtaining a | |
8 | * copy of this software and associated documentation files (the | |
9 | * "Software"), to deal in the Software without restriction, including | |
10 | * without limitation the rights to use, copy, modify, merge, publish, | |
11 | * distribute, sub license, and/or sell copies of the Software, and to | |
12 | * permit persons to whom the Software is furnished to do so, subject to | |
13 | * the following conditions: | |
14 | * | |
15 | * The above copyright notice and this permission notice (including the | |
16 | * next paragraph) shall be included in all copies or substantial portions | |
17 | * of the Software. | |
18 | * | |
19 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS | |
20 | * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF | |
21 | * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. | |
22 | * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR | |
23 | * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, | |
24 | * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE | |
25 | * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |
26 | * | |
27 | */ | |
28 | ||
29 | #include "dvo.h" | |
30 | #include "i915_reg.h" | |
31 | #include "i915_drv.h" | |
32 | ||
33 | #define NS2501_VID 0x1305 | |
34 | #define NS2501_DID 0x6726 | |
35 | ||
36 | #define NS2501_VID_LO 0x00 | |
37 | #define NS2501_VID_HI 0x01 | |
38 | #define NS2501_DID_LO 0x02 | |
39 | #define NS2501_DID_HI 0x03 | |
40 | #define NS2501_REV 0x04 | |
41 | #define NS2501_RSVD 0x05 | |
42 | #define NS2501_FREQ_LO 0x06 | |
43 | #define NS2501_FREQ_HI 0x07 | |
44 | ||
45 | #define NS2501_REG8 0x08 | |
46 | #define NS2501_8_VEN (1<<5) | |
47 | #define NS2501_8_HEN (1<<4) | |
48 | #define NS2501_8_DSEL (1<<3) | |
49 | #define NS2501_8_BPAS (1<<2) | |
50 | #define NS2501_8_RSVD (1<<1) | |
51 | #define NS2501_8_PD (1<<0) | |
52 | ||
53 | #define NS2501_REG9 0x09 | |
54 | #define NS2501_9_VLOW (1<<7) | |
55 | #define NS2501_9_MSEL_MASK (0x7<<4) | |
56 | #define NS2501_9_TSEL (1<<3) | |
57 | #define NS2501_9_RSEN (1<<2) | |
58 | #define NS2501_9_RSVD (1<<1) | |
59 | #define NS2501_9_MDI (1<<0) | |
60 | ||
61 | #define NS2501_REGC 0x0c | |
62 | ||
14f1fa2d TR |
63 | /* |
64 | * The following registers are not part of the official datasheet | |
65 | * and are the result of reverse engineering. | |
66 | */ | |
67 | ||
68 | /* | |
69 | * Register c0 controls how the DVO synchronizes with | |
70 | * its input. | |
71 | */ | |
72 | #define NS2501_REGC0 0xc0 | |
73 | #define NS2501_C0_ENABLE (1<<0) /* enable the DVO sync in general */ | |
74 | #define NS2501_C0_HSYNC (1<<1) /* synchronize horizontal with input */ | |
75 | #define NS2501_C0_VSYNC (1<<2) /* synchronize vertical with input */ | |
76 | #define NS2501_C0_RESET (1<<7) /* reset the synchronization flip/flops */ | |
77 | ||
78 | /* | |
79 | * Register 41 is somehow related to the sync register and sync | |
80 | * configuration. It should be 0x32 whenever regC0 is 0x05 (hsync off) | |
81 | * and 0x00 otherwise. | |
82 | */ | |
83 | #define NS2501_REG41 0x41 | |
84 | ||
85 | /* | |
86 | * this register controls the dithering of the DVO | |
87 | * One bit enables it, the other define the dithering depth. | |
88 | * The higher the value, the lower the dithering depth. | |
89 | */ | |
90 | #define NS2501_F9_REG 0xf9 | |
91 | #define NS2501_F9_ENABLE (1<<0) /* if set, dithering is enabled */ | |
92 | #define NS2501_F9_DITHER_MASK (0x7f<<1) /* controls the dither depth */ | |
93 | #define NS2501_F9_DITHER_SHIFT 1 /* shifts the dither mask */ | |
94 | ||
95 | /* | |
96 | * PLL configuration register. This is a pair of registers, | |
97 | * one single byte register at 1B, and a pair at 1C,1D. | |
98 | * These registers are counters/dividers. | |
99 | */ | |
100 | #define NS2501_REG1B 0x1b /* one byte PLL control register */ | |
101 | #define NS2501_REG1C 0x1c /* low-part of the second register */ | |
102 | #define NS2501_REG1D 0x1d /* high-part of the second register */ | |
103 | ||
104 | /* | |
105 | * Scaler control registers. Horizontal at b8,b9, | |
106 | * vertical at 10,11. The scale factor is computed as | |
107 | * 2^16/control-value. The low-byte comes first. | |
108 | */ | |
109 | #define NS2501_REG10 0x10 /* low-byte vertical scaler */ | |
110 | #define NS2501_REG11 0x11 /* high-byte vertical scaler */ | |
111 | #define NS2501_REGB8 0xb8 /* low-byte horizontal scaler */ | |
112 | #define NS2501_REGB9 0xb9 /* high-byte horizontal scaler */ | |
113 | ||
114 | /* | |
115 | * Display window definition. This consists of four registers | |
116 | * per dimension. One register pair defines the start of the | |
117 | * display, one the end. | |
118 | * As far as I understand, this defines the window within which | |
119 | * the scaler samples the input. | |
120 | */ | |
121 | #define NS2501_REGC1 0xc1 /* low-byte horizontal display start */ | |
122 | #define NS2501_REGC2 0xc2 /* high-byte horizontal display start */ | |
123 | #define NS2501_REGC3 0xc3 /* low-byte horizontal display stop */ | |
124 | #define NS2501_REGC4 0xc4 /* high-byte horizontal display stop */ | |
125 | #define NS2501_REGC5 0xc5 /* low-byte vertical display start */ | |
126 | #define NS2501_REGC6 0xc6 /* high-byte vertical display start */ | |
127 | #define NS2501_REGC7 0xc7 /* low-byte vertical display stop */ | |
128 | #define NS2501_REGC8 0xc8 /* high-byte vertical display stop */ | |
129 | ||
130 | /* | |
131 | * The following register pair seems to define the start of | |
132 | * the vertical sync. If automatic syncing is enabled, and the | |
133 | * register value defines a sync pulse that is later than the | |
134 | * incoming sync, then the register value is ignored and the | |
135 | * external hsync triggers the synchronization. | |
136 | */ | |
137 | #define NS2501_REG80 0x80 /* low-byte vsync-start */ | |
138 | #define NS2501_REG81 0x81 /* high-byte vsync-start */ | |
139 | ||
140 | /* | |
141 | * The following register pair seems to define the total number | |
142 | * of lines created at the output side of the scaler. | |
143 | * This is again a low-high register pair. | |
144 | */ | |
145 | #define NS2501_REG82 0x82 /* output display height, low byte */ | |
146 | #define NS2501_REG83 0x83 /* output display height, high byte */ | |
147 | ||
148 | /* | |
149 | * The following registers define the end of the front-porch | |
150 | * in horizontal and vertical position and hence allow to shift | |
151 | * the image left/right or up/down. | |
152 | */ | |
153 | #define NS2501_REG98 0x98 /* horizontal start of display + 256, low */ | |
154 | #define NS2501_REG99 0x99 /* horizontal start of display + 256, high */ | |
155 | #define NS2501_REG8E 0x8e /* vertical start of the display, low byte */ | |
156 | #define NS2501_REG8F 0x8f /* vertical start of the display, high byte */ | |
157 | ||
158 | /* | |
159 | * The following register pair control the function of the | |
160 | * backlight and the DVO output. To enable the corresponding | |
161 | * function, the corresponding bit must be set in both registers. | |
162 | */ | |
163 | #define NS2501_REG34 0x34 /* DVO enable functions, first register */ | |
164 | #define NS2501_REG35 0x35 /* DVO enable functions, second register */ | |
165 | #define NS2501_34_ENABLE_OUTPUT (1<<0) /* enable DVO output */ | |
166 | #define NS2501_34_ENABLE_BACKLIGHT (1<<1) /* enable backlight */ | |
167 | ||
168 | /* | |
169 | * Registers 9C and 9D define the vertical output offset | |
170 | * of the visible region. | |
171 | */ | |
172 | #define NS2501_REG9C 0x9c | |
173 | #define NS2501_REG9D 0x9d | |
174 | ||
175 | /* | |
176 | * The register 9F defines the dithering. This requires the | |
177 | * scaler to be ON. Bit 0 enables dithering, the remaining | |
178 | * bits control the depth of the dither. The higher the value, | |
179 | * the LOWER the dithering amplitude. A good value seems to be | |
180 | * 15 (total register value). | |
181 | */ | |
182 | #define NS2501_REGF9 0xf9 | |
183 | #define NS2501_F9_ENABLE_DITHER (1<<0) /* enable dithering */ | |
184 | #define NS2501_F9_DITHER_MASK (0x7f<<1) /* dither masking */ | |
185 | #define NS2501_F9_DITHER_SHIFT 1 /* upshift of the dither mask */ | |
186 | ||
bae06ca1 VS |
187 | enum { |
188 | MODE_640x480, | |
189 | MODE_800x600, | |
190 | MODE_1024x768, | |
191 | }; | |
192 | ||
193 | struct ns2501_reg { | |
194 | uint8_t offset; | |
195 | uint8_t value; | |
196 | }; | |
197 | ||
198 | /* | |
14f1fa2d TR |
199 | * The following structure keeps the complete configuration of |
200 | * the DVO, given a specific output configuration. | |
201 | * This is pretty much guess-work from reverse-engineering, so | |
202 | * read all this with a grain of salt. | |
203 | */ | |
204 | struct ns2501_configuration { | |
205 | uint8_t sync; /* configuration of the C0 register */ | |
206 | uint8_t conf; /* configuration register 8 */ | |
207 | uint8_t syncb; /* configuration register 41 */ | |
208 | uint8_t dither; /* configuration of the dithering */ | |
209 | uint8_t pll_a; /* PLL configuration, register A, 1B */ | |
210 | uint16_t pll_b; /* PLL configuration, register B, 1C/1D */ | |
211 | uint16_t hstart; /* horizontal start, registers C1/C2 */ | |
212 | uint16_t hstop; /* horizontal total, registers C3/C4 */ | |
213 | uint16_t vstart; /* vertical start, registers C5/C6 */ | |
214 | uint16_t vstop; /* vertical total, registers C7/C8 */ | |
215 | uint16_t vsync; /* manual vertical sync start, 80/81 */ | |
216 | uint16_t vtotal; /* number of lines generated, 82/83 */ | |
217 | uint16_t hpos; /* horizontal position + 256, 98/99 */ | |
218 | uint16_t vpos; /* vertical position, 8e/8f */ | |
219 | uint16_t voffs; /* vertical output offset, 9c/9d */ | |
220 | uint16_t hscale; /* horizontal scaling factor, b8/b9 */ | |
221 | uint16_t vscale; /* vertical scaling factor, 10/11 */ | |
222 | }; | |
223 | ||
224 | /* | |
225 | * DVO configuration values, partially based on what the BIOS | |
226 | * of the Fujitsu Lifebook S6010 writes into registers, | |
227 | * partially found by manual tweaking. These configurations assume | |
228 | * a 1024x768 panel. | |
bae06ca1 | 229 | */ |
14f1fa2d | 230 | static const struct ns2501_configuration ns2501_modes[] = { |
bae06ca1 | 231 | [MODE_640x480] = { |
14f1fa2d TR |
232 | .sync = NS2501_C0_ENABLE | NS2501_C0_VSYNC, |
233 | .conf = NS2501_8_VEN | NS2501_8_HEN | NS2501_8_PD, | |
234 | .syncb = 0x32, | |
235 | .dither = 0x0f, | |
236 | .pll_a = 17, | |
237 | .pll_b = 852, | |
238 | .hstart = 144, | |
239 | .hstop = 783, | |
240 | .vstart = 22, | |
241 | .vstop = 514, | |
242 | .vsync = 2047, /* actually, ignored with this config */ | |
243 | .vtotal = 1341, | |
244 | .hpos = 0, | |
245 | .vpos = 16, | |
246 | .voffs = 36, | |
247 | .hscale = 40960, | |
248 | .vscale = 40960 | |
bae06ca1 VS |
249 | }, |
250 | [MODE_800x600] = { | |
14f1fa2d TR |
251 | .sync = NS2501_C0_ENABLE | |
252 | NS2501_C0_HSYNC | NS2501_C0_VSYNC, | |
253 | .conf = NS2501_8_VEN | NS2501_8_HEN | NS2501_8_PD, | |
254 | .syncb = 0x00, | |
255 | .dither = 0x0f, | |
256 | .pll_a = 25, | |
257 | .pll_b = 612, | |
258 | .hstart = 215, | |
259 | .hstop = 1016, | |
260 | .vstart = 26, | |
261 | .vstop = 627, | |
262 | .vsync = 807, | |
263 | .vtotal = 1341, | |
264 | .hpos = 0, | |
265 | .vpos = 4, | |
266 | .voffs = 35, | |
267 | .hscale = 51248, | |
268 | .vscale = 51232 | |
bae06ca1 VS |
269 | }, |
270 | [MODE_1024x768] = { | |
14f1fa2d TR |
271 | .sync = NS2501_C0_ENABLE | NS2501_C0_VSYNC, |
272 | .conf = NS2501_8_VEN | NS2501_8_HEN | NS2501_8_PD, | |
273 | .syncb = 0x32, | |
274 | .dither = 0x0f, | |
275 | .pll_a = 11, | |
276 | .pll_b = 1350, | |
277 | .hstart = 276, | |
278 | .hstop = 1299, | |
279 | .vstart = 15, | |
280 | .vstop = 1056, | |
281 | .vsync = 2047, | |
282 | .vtotal = 1341, | |
283 | .hpos = 0, | |
284 | .vpos = 7, | |
285 | .voffs = 27, | |
286 | .hscale = 65535, | |
287 | .vscale = 65535 | |
288 | } | |
289 | }; | |
290 | ||
291 | /* | |
292 | * Other configuration values left by the BIOS of the | |
293 | * Fujitsu S6010 in the DVO control registers. Their | |
294 | * value does not depend on the BIOS and their meaning | |
295 | * is unknown. | |
296 | */ | |
297 | ||
298 | static const struct ns2501_reg mode_agnostic_values[] = { | |
299 | /* 08 is mode specific */ | |
300 | [0] = { .offset = 0x0a, .value = 0x81, }, | |
301 | /* 10,11 are part of the mode specific configuration */ | |
302 | [1] = { .offset = 0x12, .value = 0x02, }, | |
303 | [2] = { .offset = 0x18, .value = 0x07, }, | |
304 | [3] = { .offset = 0x19, .value = 0x00, }, | |
305 | [4] = { .offset = 0x1a, .value = 0x00, }, /* PLL?, ignored */ | |
306 | /* 1b,1c,1d are part of the mode specific configuration */ | |
307 | [5] = { .offset = 0x1e, .value = 0x02, }, | |
308 | [6] = { .offset = 0x1f, .value = 0x40, }, | |
309 | [7] = { .offset = 0x20, .value = 0x00, }, | |
310 | [8] = { .offset = 0x21, .value = 0x00, }, | |
311 | [9] = { .offset = 0x22, .value = 0x00, }, | |
312 | [10] = { .offset = 0x23, .value = 0x00, }, | |
313 | [11] = { .offset = 0x24, .value = 0x00, }, | |
314 | [12] = { .offset = 0x25, .value = 0x00, }, | |
315 | [13] = { .offset = 0x26, .value = 0x00, }, | |
316 | [14] = { .offset = 0x27, .value = 0x00, }, | |
317 | [15] = { .offset = 0x7e, .value = 0x18, }, | |
318 | /* 80-84 are part of the mode-specific configuration */ | |
319 | [16] = { .offset = 0x84, .value = 0x00, }, | |
320 | [17] = { .offset = 0x85, .value = 0x00, }, | |
321 | [18] = { .offset = 0x86, .value = 0x00, }, | |
322 | [19] = { .offset = 0x87, .value = 0x00, }, | |
323 | [20] = { .offset = 0x88, .value = 0x00, }, | |
324 | [21] = { .offset = 0x89, .value = 0x00, }, | |
325 | [22] = { .offset = 0x8a, .value = 0x00, }, | |
326 | [23] = { .offset = 0x8b, .value = 0x00, }, | |
327 | [24] = { .offset = 0x8c, .value = 0x10, }, | |
328 | [25] = { .offset = 0x8d, .value = 0x02, }, | |
329 | /* 8e,8f are part of the mode-specific configuration */ | |
330 | [26] = { .offset = 0x90, .value = 0xff, }, | |
331 | [27] = { .offset = 0x91, .value = 0x07, }, | |
332 | [28] = { .offset = 0x92, .value = 0xa0, }, | |
333 | [29] = { .offset = 0x93, .value = 0x02, }, | |
334 | [30] = { .offset = 0x94, .value = 0x00, }, | |
335 | [31] = { .offset = 0x95, .value = 0x00, }, | |
336 | [32] = { .offset = 0x96, .value = 0x05, }, | |
337 | [33] = { .offset = 0x97, .value = 0x00, }, | |
338 | /* 98,99 are part of the mode-specific configuration */ | |
339 | [34] = { .offset = 0x9a, .value = 0x88, }, | |
340 | [35] = { .offset = 0x9b, .value = 0x00, }, | |
341 | /* 9c,9d are part of the mode-specific configuration */ | |
342 | [36] = { .offset = 0x9e, .value = 0x25, }, | |
343 | [37] = { .offset = 0x9f, .value = 0x03, }, | |
344 | [38] = { .offset = 0xa0, .value = 0x28, }, | |
345 | [39] = { .offset = 0xa1, .value = 0x01, }, | |
346 | [40] = { .offset = 0xa2, .value = 0x28, }, | |
347 | [41] = { .offset = 0xa3, .value = 0x05, }, | |
348 | /* register 0xa4 is mode specific, but 0x80..0x84 works always */ | |
349 | [42] = { .offset = 0xa4, .value = 0x84, }, | |
350 | [43] = { .offset = 0xa5, .value = 0x00, }, | |
351 | [44] = { .offset = 0xa6, .value = 0x00, }, | |
352 | [45] = { .offset = 0xa7, .value = 0x00, }, | |
353 | [46] = { .offset = 0xa8, .value = 0x00, }, | |
354 | /* 0xa9 to 0xab are mode specific, but have no visible effect */ | |
355 | [47] = { .offset = 0xa9, .value = 0x04, }, | |
356 | [48] = { .offset = 0xaa, .value = 0x70, }, | |
357 | [49] = { .offset = 0xab, .value = 0x4f, }, | |
358 | [50] = { .offset = 0xac, .value = 0x00, }, | |
359 | [51] = { .offset = 0xad, .value = 0x00, }, | |
360 | [52] = { .offset = 0xb6, .value = 0x09, }, | |
361 | [53] = { .offset = 0xb7, .value = 0x03, }, | |
362 | /* b8,b9 are part of the mode-specific configuration */ | |
363 | [54] = { .offset = 0xba, .value = 0x00, }, | |
364 | [55] = { .offset = 0xbb, .value = 0x20, }, | |
365 | [56] = { .offset = 0xf3, .value = 0x90, }, | |
366 | [57] = { .offset = 0xf4, .value = 0x00, }, | |
367 | [58] = { .offset = 0xf7, .value = 0x88, }, | |
368 | /* f8 is mode specific, but the value does not matter */ | |
369 | [59] = { .offset = 0xf8, .value = 0x0a, }, | |
370 | [60] = { .offset = 0xf9, .value = 0x00, } | |
bae06ca1 VS |
371 | }; |
372 | ||
d9d9bced VS |
373 | static const struct ns2501_reg regs_init[] = { |
374 | [0] = { .offset = 0x35, .value = 0xff, }, | |
375 | [1] = { .offset = 0x34, .value = 0x00, }, | |
376 | [2] = { .offset = 0x08, .value = 0x30, }, | |
377 | }; | |
378 | ||
7434a255 | 379 | struct ns2501_priv { |
7434a255 | 380 | bool quiet; |
14f1fa2d | 381 | const struct ns2501_configuration *conf; |
7434a255 TR |
382 | }; |
383 | ||
384 | #define NSPTR(d) ((NS2501Ptr)(d->DriverPrivate.ptr)) | |
385 | ||
7434a255 TR |
386 | /* |
387 | ** Read a register from the ns2501. | |
388 | ** Returns true if successful, false otherwise. | |
389 | ** If it returns false, it might be wise to enable the | |
390 | ** DVO with the above function. | |
391 | */ | |
392 | static bool ns2501_readb(struct intel_dvo_device *dvo, int addr, uint8_t * ch) | |
393 | { | |
394 | struct ns2501_priv *ns = dvo->dev_priv; | |
395 | struct i2c_adapter *adapter = dvo->i2c_bus; | |
396 | u8 out_buf[2]; | |
397 | u8 in_buf[2]; | |
398 | ||
399 | struct i2c_msg msgs[] = { | |
400 | { | |
401 | .addr = dvo->slave_addr, | |
402 | .flags = 0, | |
403 | .len = 1, | |
404 | .buf = out_buf, | |
405 | }, | |
406 | { | |
407 | .addr = dvo->slave_addr, | |
408 | .flags = I2C_M_RD, | |
409 | .len = 1, | |
410 | .buf = in_buf, | |
411 | } | |
412 | }; | |
413 | ||
414 | out_buf[0] = addr; | |
415 | out_buf[1] = 0; | |
416 | ||
417 | if (i2c_transfer(adapter, msgs, 2) == 2) { | |
418 | *ch = in_buf[0]; | |
419 | return true; | |
6ed6bd84 | 420 | } |
7434a255 TR |
421 | |
422 | if (!ns->quiet) { | |
423 | DRM_DEBUG_KMS | |
424 | ("Unable to read register 0x%02x from %s:0x%02x.\n", addr, | |
425 | adapter->name, dvo->slave_addr); | |
426 | } | |
427 | ||
428 | return false; | |
429 | } | |
430 | ||
431 | /* | |
432 | ** Write a register to the ns2501. | |
433 | ** Returns true if successful, false otherwise. | |
434 | ** If it returns false, it might be wise to enable the | |
435 | ** DVO with the above function. | |
436 | */ | |
437 | static bool ns2501_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) | |
438 | { | |
439 | struct ns2501_priv *ns = dvo->dev_priv; | |
440 | struct i2c_adapter *adapter = dvo->i2c_bus; | |
441 | uint8_t out_buf[2]; | |
442 | ||
443 | struct i2c_msg msg = { | |
444 | .addr = dvo->slave_addr, | |
445 | .flags = 0, | |
446 | .len = 2, | |
447 | .buf = out_buf, | |
448 | }; | |
449 | ||
450 | out_buf[0] = addr; | |
451 | out_buf[1] = ch; | |
452 | ||
453 | if (i2c_transfer(adapter, &msg, 1) == 1) { | |
454 | return true; | |
455 | } | |
456 | ||
457 | if (!ns->quiet) { | |
458 | DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d\n", | |
459 | addr, adapter->name, dvo->slave_addr); | |
460 | } | |
461 | ||
462 | return false; | |
463 | } | |
464 | ||
465 | /* National Semiconductor 2501 driver for chip on i2c bus | |
466 | * scan for the chip on the bus. | |
467 | * Hope the VBIOS initialized the PLL correctly so we can | |
468 | * talk to it. If not, it will not be seen and not detected. | |
469 | * Bummer! | |
470 | */ | |
471 | static bool ns2501_init(struct intel_dvo_device *dvo, | |
472 | struct i2c_adapter *adapter) | |
473 | { | |
474 | /* this will detect the NS2501 chip on the specified i2c bus */ | |
475 | struct ns2501_priv *ns; | |
476 | unsigned char ch; | |
477 | ||
478 | ns = kzalloc(sizeof(struct ns2501_priv), GFP_KERNEL); | |
479 | if (ns == NULL) | |
480 | return false; | |
481 | ||
482 | dvo->i2c_bus = adapter; | |
483 | dvo->dev_priv = ns; | |
484 | ns->quiet = true; | |
485 | ||
486 | if (!ns2501_readb(dvo, NS2501_VID_LO, &ch)) | |
487 | goto out; | |
488 | ||
489 | if (ch != (NS2501_VID & 0xff)) { | |
490 | DRM_DEBUG_KMS("ns2501 not detected got %d: from %s Slave %d.\n", | |
491 | ch, adapter->name, dvo->slave_addr); | |
492 | goto out; | |
493 | } | |
494 | ||
495 | if (!ns2501_readb(dvo, NS2501_DID_LO, &ch)) | |
496 | goto out; | |
497 | ||
498 | if (ch != (NS2501_DID & 0xff)) { | |
499 | DRM_DEBUG_KMS("ns2501 not detected got %d: from %s Slave %d.\n", | |
500 | ch, adapter->name, dvo->slave_addr); | |
501 | goto out; | |
502 | } | |
503 | ns->quiet = false; | |
7434a255 TR |
504 | |
505 | DRM_DEBUG_KMS("init ns2501 dvo controller successfully!\n"); | |
bae06ca1 | 506 | |
7434a255 TR |
507 | return true; |
508 | ||
509 | out: | |
510 | kfree(ns); | |
511 | return false; | |
512 | } | |
513 | ||
514 | static enum drm_connector_status ns2501_detect(struct intel_dvo_device *dvo) | |
515 | { | |
516 | /* | |
517 | * This is a Laptop display, it doesn't have hotplugging. | |
518 | * Even if not, the detection bit of the 2501 is unreliable as | |
519 | * it only works for some display types. | |
520 | * It is even more unreliable as the PLL must be active for | |
521 | * allowing reading from the chiop. | |
522 | */ | |
523 | return connector_status_connected; | |
524 | } | |
525 | ||
526 | static enum drm_mode_status ns2501_mode_valid(struct intel_dvo_device *dvo, | |
527 | struct drm_display_mode *mode) | |
528 | { | |
529 | DRM_DEBUG_KMS | |
1643a9c6 CJ |
530 | ("is mode valid (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d)\n", |
531 | mode->hdisplay, mode->htotal, mode->vdisplay, mode->vtotal); | |
7434a255 TR |
532 | |
533 | /* | |
534 | * Currently, these are all the modes I have data from. | |
535 | * More might exist. Unclear how to find the native resolution | |
536 | * of the panel in here so we could always accept it | |
537 | * by disabling the scaler. | |
538 | */ | |
b07aaf88 VS |
539 | if ((mode->hdisplay == 640 && mode->vdisplay == 480 && mode->clock == 25175) || |
540 | (mode->hdisplay == 800 && mode->vdisplay == 600 && mode->clock == 40000) || | |
541 | (mode->hdisplay == 1024 && mode->vdisplay == 768 && mode->clock == 65000)) { | |
7434a255 TR |
542 | return MODE_OK; |
543 | } else { | |
544 | return MODE_ONE_SIZE; /* Is this a reasonable error? */ | |
545 | } | |
546 | } | |
547 | ||
548 | static void ns2501_mode_set(struct intel_dvo_device *dvo, | |
7c5f93b0 VS |
549 | const struct drm_display_mode *mode, |
550 | const struct drm_display_mode *adjusted_mode) | |
7434a255 | 551 | { |
14f1fa2d | 552 | const struct ns2501_configuration *conf; |
7434a255 | 553 | struct ns2501_priv *ns = (struct ns2501_priv *)(dvo->dev_priv); |
bae06ca1 | 554 | int mode_idx, i; |
7434a255 TR |
555 | |
556 | DRM_DEBUG_KMS | |
1643a9c6 CJ |
557 | ("set mode (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d).\n", |
558 | mode->hdisplay, mode->htotal, mode->vdisplay, mode->vtotal); | |
7434a255 | 559 | |
14f1fa2d TR |
560 | DRM_DEBUG_KMS("Detailed requested mode settings are:\n" |
561 | "clock : %d kHz\n" | |
562 | "hdisplay : %d\n" | |
563 | "hblank start : %d\n" | |
564 | "hblank end : %d\n" | |
565 | "hsync start : %d\n" | |
566 | "hsync end : %d\n" | |
567 | "htotal : %d\n" | |
568 | "hskew : %d\n" | |
569 | "vdisplay : %d\n" | |
570 | "vblank start : %d\n" | |
571 | "hblank end : %d\n" | |
572 | "vsync start : %d\n" | |
573 | "vsync end : %d\n" | |
574 | "vtotal : %d\n", | |
575 | adjusted_mode->crtc_clock, | |
576 | adjusted_mode->crtc_hdisplay, | |
577 | adjusted_mode->crtc_hblank_start, | |
578 | adjusted_mode->crtc_hblank_end, | |
579 | adjusted_mode->crtc_hsync_start, | |
580 | adjusted_mode->crtc_hsync_end, | |
581 | adjusted_mode->crtc_htotal, | |
582 | adjusted_mode->crtc_hskew, | |
583 | adjusted_mode->crtc_vdisplay, | |
584 | adjusted_mode->crtc_vblank_start, | |
585 | adjusted_mode->crtc_vblank_end, | |
586 | adjusted_mode->crtc_vsync_start, | |
587 | adjusted_mode->crtc_vsync_end, | |
588 | adjusted_mode->crtc_vtotal); | |
589 | ||
bae06ca1 VS |
590 | if (mode->hdisplay == 640 && mode->vdisplay == 480) |
591 | mode_idx = MODE_640x480; | |
592 | else if (mode->hdisplay == 800 && mode->vdisplay == 600) | |
593 | mode_idx = MODE_800x600; | |
594 | else if (mode->hdisplay == 1024 && mode->vdisplay == 768) | |
595 | mode_idx = MODE_1024x768; | |
596 | else | |
597 | return; | |
7434a255 | 598 | |
d9d9bced VS |
599 | /* Hopefully doing it every time won't hurt... */ |
600 | for (i = 0; i < ARRAY_SIZE(regs_init); i++) | |
601 | ns2501_writeb(dvo, regs_init[i].offset, regs_init[i].value); | |
602 | ||
14f1fa2d TR |
603 | /* Write the mode-agnostic values */ |
604 | for (i = 0; i < ARRAY_SIZE(mode_agnostic_values); i++) | |
605 | ns2501_writeb(dvo, mode_agnostic_values[i].offset, | |
606 | mode_agnostic_values[i].value); | |
607 | ||
608 | /* Write now the mode-specific configuration */ | |
609 | conf = ns2501_modes + mode_idx; | |
610 | ns->conf = conf; | |
611 | ||
612 | ns2501_writeb(dvo, NS2501_REG8, conf->conf); | |
613 | ns2501_writeb(dvo, NS2501_REG1B, conf->pll_a); | |
614 | ns2501_writeb(dvo, NS2501_REG1C, conf->pll_b & 0xff); | |
615 | ns2501_writeb(dvo, NS2501_REG1D, conf->pll_b >> 8); | |
616 | ns2501_writeb(dvo, NS2501_REGC1, conf->hstart & 0xff); | |
617 | ns2501_writeb(dvo, NS2501_REGC2, conf->hstart >> 8); | |
618 | ns2501_writeb(dvo, NS2501_REGC3, conf->hstop & 0xff); | |
619 | ns2501_writeb(dvo, NS2501_REGC4, conf->hstop >> 8); | |
620 | ns2501_writeb(dvo, NS2501_REGC5, conf->vstart & 0xff); | |
621 | ns2501_writeb(dvo, NS2501_REGC6, conf->vstart >> 8); | |
622 | ns2501_writeb(dvo, NS2501_REGC7, conf->vstop & 0xff); | |
623 | ns2501_writeb(dvo, NS2501_REGC8, conf->vstop >> 8); | |
624 | ns2501_writeb(dvo, NS2501_REG80, conf->vsync & 0xff); | |
625 | ns2501_writeb(dvo, NS2501_REG81, conf->vsync >> 8); | |
626 | ns2501_writeb(dvo, NS2501_REG82, conf->vtotal & 0xff); | |
627 | ns2501_writeb(dvo, NS2501_REG83, conf->vtotal >> 8); | |
628 | ns2501_writeb(dvo, NS2501_REG98, conf->hpos & 0xff); | |
629 | ns2501_writeb(dvo, NS2501_REG99, conf->hpos >> 8); | |
630 | ns2501_writeb(dvo, NS2501_REG8E, conf->vpos & 0xff); | |
631 | ns2501_writeb(dvo, NS2501_REG8F, conf->vpos >> 8); | |
632 | ns2501_writeb(dvo, NS2501_REG9C, conf->voffs & 0xff); | |
633 | ns2501_writeb(dvo, NS2501_REG9D, conf->voffs >> 8); | |
634 | ns2501_writeb(dvo, NS2501_REGB8, conf->hscale & 0xff); | |
635 | ns2501_writeb(dvo, NS2501_REGB9, conf->hscale >> 8); | |
636 | ns2501_writeb(dvo, NS2501_REG10, conf->vscale & 0xff); | |
637 | ns2501_writeb(dvo, NS2501_REG11, conf->vscale >> 8); | |
638 | ns2501_writeb(dvo, NS2501_REGF9, conf->dither); | |
639 | ns2501_writeb(dvo, NS2501_REG41, conf->syncb); | |
640 | ns2501_writeb(dvo, NS2501_REGC0, conf->sync); | |
7434a255 TR |
641 | } |
642 | ||
732ce74f DV |
643 | /* set the NS2501 power state */ |
644 | static bool ns2501_get_hw_state(struct intel_dvo_device *dvo) | |
645 | { | |
646 | unsigned char ch; | |
647 | ||
648 | if (!ns2501_readb(dvo, NS2501_REG8, &ch)) | |
649 | return false; | |
650 | ||
bae06ca1 | 651 | return ch & NS2501_8_PD; |
732ce74f DV |
652 | } |
653 | ||
7434a255 | 654 | /* set the NS2501 power state */ |
fac3274c | 655 | static void ns2501_dpms(struct intel_dvo_device *dvo, bool enable) |
7434a255 | 656 | { |
7434a255 | 657 | struct ns2501_priv *ns = (struct ns2501_priv *)(dvo->dev_priv); |
7434a255 | 658 | |
1643a9c6 | 659 | DRM_DEBUG_KMS("Trying set the dpms of the DVO to %i\n", enable); |
7434a255 | 660 | |
bae06ca1 | 661 | if (enable) { |
14f1fa2d | 662 | ns2501_writeb(dvo, NS2501_REGC0, ns->conf->sync | 0x08); |
bae06ca1 | 663 | |
14f1fa2d | 664 | ns2501_writeb(dvo, NS2501_REG41, ns->conf->syncb); |
bae06ca1 | 665 | |
14f1fa2d | 666 | ns2501_writeb(dvo, NS2501_REG34, NS2501_34_ENABLE_OUTPUT); |
bae06ca1 VS |
667 | msleep(15); |
668 | ||
14f1fa2d TR |
669 | ns2501_writeb(dvo, NS2501_REG8, |
670 | ns->conf->conf | NS2501_8_BPAS); | |
671 | if (!(ns->conf->conf & NS2501_8_BPAS)) | |
672 | ns2501_writeb(dvo, NS2501_REG8, ns->conf->conf); | |
bae06ca1 VS |
673 | msleep(200); |
674 | ||
14f1fa2d TR |
675 | ns2501_writeb(dvo, NS2501_REG34, |
676 | NS2501_34_ENABLE_OUTPUT | NS2501_34_ENABLE_BACKLIGHT); | |
bae06ca1 | 677 | |
14f1fa2d | 678 | ns2501_writeb(dvo, NS2501_REGC0, ns->conf->sync); |
bae06ca1 | 679 | } else { |
14f1fa2d | 680 | ns2501_writeb(dvo, NS2501_REG34, NS2501_34_ENABLE_OUTPUT); |
bae06ca1 VS |
681 | msleep(200); |
682 | ||
14f1fa2d TR |
683 | ns2501_writeb(dvo, NS2501_REG8, NS2501_8_VEN | NS2501_8_HEN | |
684 | NS2501_8_BPAS); | |
bae06ca1 VS |
685 | msleep(15); |
686 | ||
14f1fa2d | 687 | ns2501_writeb(dvo, NS2501_REG34, 0x00); |
7434a255 TR |
688 | } |
689 | } | |
690 | ||
7434a255 TR |
691 | static void ns2501_destroy(struct intel_dvo_device *dvo) |
692 | { | |
693 | struct ns2501_priv *ns = dvo->dev_priv; | |
694 | ||
695 | if (ns) { | |
696 | kfree(ns); | |
697 | dvo->dev_priv = NULL; | |
698 | } | |
699 | } | |
700 | ||
701 | struct intel_dvo_dev_ops ns2501_ops = { | |
702 | .init = ns2501_init, | |
703 | .detect = ns2501_detect, | |
704 | .mode_valid = ns2501_mode_valid, | |
705 | .mode_set = ns2501_mode_set, | |
706 | .dpms = ns2501_dpms, | |
732ce74f | 707 | .get_hw_state = ns2501_get_hw_state, |
7434a255 TR |
708 | .destroy = ns2501_destroy, |
709 | }; |