]>
Commit | Line | Data |
---|---|---|
a4fc5ed6 KP |
1 | /* |
2 | * Copyright © 2008 Intel Corporation | |
3 | * | |
4 | * Permission is hereby granted, free of charge, to any person obtaining a | |
5 | * copy of this software and associated documentation files (the "Software"), | |
6 | * to deal in the Software without restriction, including without limitation | |
7 | * the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
8 | * and/or sell copies of the Software, and to permit persons to whom the | |
9 | * Software is furnished to do so, subject to the following conditions: | |
10 | * | |
11 | * The above copyright notice and this permission notice (including the next | |
12 | * paragraph) shall be included in all copies or substantial portions of the | |
13 | * Software. | |
14 | * | |
15 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
16 | * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
17 | * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
18 | * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER | |
19 | * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING | |
20 | * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS | |
21 | * IN THE SOFTWARE. | |
22 | * | |
23 | * Authors: | |
24 | * Keith Packard <keithp@keithp.com> | |
25 | * | |
26 | */ | |
27 | ||
28 | #include <linux/i2c.h> | |
5a0e3ad6 | 29 | #include <linux/slab.h> |
2d1a8a48 | 30 | #include <linux/export.h> |
01527b31 CT |
31 | #include <linux/notifier.h> |
32 | #include <linux/reboot.h> | |
760285e7 | 33 | #include <drm/drmP.h> |
c6f95f27 | 34 | #include <drm/drm_atomic_helper.h> |
760285e7 DH |
35 | #include <drm/drm_crtc.h> |
36 | #include <drm/drm_crtc_helper.h> | |
37 | #include <drm/drm_edid.h> | |
a4fc5ed6 | 38 | #include "intel_drv.h" |
760285e7 | 39 | #include <drm/i915_drm.h> |
a4fc5ed6 | 40 | #include "i915_drv.h" |
a4fc5ed6 | 41 | |
a4fc5ed6 KP |
42 | #define DP_LINK_CHECK_TIMEOUT (10 * 1000) |
43 | ||
559be30c TP |
44 | /* Compliance test status bits */ |
45 | #define INTEL_DP_RESOLUTION_SHIFT_MASK 0 | |
46 | #define INTEL_DP_RESOLUTION_PREFERRED (1 << INTEL_DP_RESOLUTION_SHIFT_MASK) | |
47 | #define INTEL_DP_RESOLUTION_STANDARD (2 << INTEL_DP_RESOLUTION_SHIFT_MASK) | |
48 | #define INTEL_DP_RESOLUTION_FAILSAFE (3 << INTEL_DP_RESOLUTION_SHIFT_MASK) | |
49 | ||
9dd4ffdf | 50 | struct dp_link_dpll { |
840b32b7 | 51 | int clock; |
9dd4ffdf CML |
52 | struct dpll dpll; |
53 | }; | |
54 | ||
55 | static const struct dp_link_dpll gen4_dpll[] = { | |
840b32b7 | 56 | { 162000, |
9dd4ffdf | 57 | { .p1 = 2, .p2 = 10, .n = 2, .m1 = 23, .m2 = 8 } }, |
840b32b7 | 58 | { 270000, |
9dd4ffdf CML |
59 | { .p1 = 1, .p2 = 10, .n = 1, .m1 = 14, .m2 = 2 } } |
60 | }; | |
61 | ||
62 | static const struct dp_link_dpll pch_dpll[] = { | |
840b32b7 | 63 | { 162000, |
9dd4ffdf | 64 | { .p1 = 2, .p2 = 10, .n = 1, .m1 = 12, .m2 = 9 } }, |
840b32b7 | 65 | { 270000, |
9dd4ffdf CML |
66 | { .p1 = 1, .p2 = 10, .n = 2, .m1 = 14, .m2 = 8 } } |
67 | }; | |
68 | ||
65ce4bf5 | 69 | static const struct dp_link_dpll vlv_dpll[] = { |
840b32b7 | 70 | { 162000, |
58f6e632 | 71 | { .p1 = 3, .p2 = 2, .n = 5, .m1 = 3, .m2 = 81 } }, |
840b32b7 | 72 | { 270000, |
65ce4bf5 CML |
73 | { .p1 = 2, .p2 = 2, .n = 1, .m1 = 2, .m2 = 27 } } |
74 | }; | |
75 | ||
ef9348c8 CML |
76 | /* |
77 | * CHV supports eDP 1.4 that have more link rates. | |
78 | * Below only provides the fixed rate but exclude variable rate. | |
79 | */ | |
80 | static const struct dp_link_dpll chv_dpll[] = { | |
81 | /* | |
82 | * CHV requires to program fractional division for m2. | |
83 | * m2 is stored in fixed point format using formula below | |
84 | * (m2_int << 22) | m2_fraction | |
85 | */ | |
840b32b7 | 86 | { 162000, /* m2_int = 32, m2_fraction = 1677722 */ |
ef9348c8 | 87 | { .p1 = 4, .p2 = 2, .n = 1, .m1 = 2, .m2 = 0x819999a } }, |
840b32b7 | 88 | { 270000, /* m2_int = 27, m2_fraction = 0 */ |
ef9348c8 | 89 | { .p1 = 4, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } }, |
840b32b7 | 90 | { 540000, /* m2_int = 27, m2_fraction = 0 */ |
ef9348c8 CML |
91 | { .p1 = 2, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } } |
92 | }; | |
637a9c63 | 93 | |
64987fc5 SJ |
94 | static const int bxt_rates[] = { 162000, 216000, 243000, 270000, |
95 | 324000, 432000, 540000 }; | |
637a9c63 | 96 | static const int skl_rates[] = { 162000, 216000, 270000, |
f4896f15 VS |
97 | 324000, 432000, 540000 }; |
98 | static const int default_rates[] = { 162000, 270000, 540000 }; | |
ef9348c8 | 99 | |
cfcb0fc9 JB |
100 | /** |
101 | * is_edp - is the given port attached to an eDP panel (either CPU or PCH) | |
102 | * @intel_dp: DP struct | |
103 | * | |
104 | * If a CPU or PCH DP output is attached to an eDP panel, this function | |
105 | * will return true, and false otherwise. | |
106 | */ | |
107 | static bool is_edp(struct intel_dp *intel_dp) | |
108 | { | |
da63a9f2 PZ |
109 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
110 | ||
111 | return intel_dig_port->base.type == INTEL_OUTPUT_EDP; | |
cfcb0fc9 JB |
112 | } |
113 | ||
68b4d824 | 114 | static struct drm_device *intel_dp_to_dev(struct intel_dp *intel_dp) |
cfcb0fc9 | 115 | { |
68b4d824 ID |
116 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
117 | ||
118 | return intel_dig_port->base.base.dev; | |
cfcb0fc9 JB |
119 | } |
120 | ||
df0e9248 CW |
121 | static struct intel_dp *intel_attached_dp(struct drm_connector *connector) |
122 | { | |
fa90ecef | 123 | return enc_to_intel_dp(&intel_attached_encoder(connector)->base); |
df0e9248 CW |
124 | } |
125 | ||
ea5b213a | 126 | static void intel_dp_link_down(struct intel_dp *intel_dp); |
1e0560e0 | 127 | static bool edp_panel_vdd_on(struct intel_dp *intel_dp); |
4be73780 | 128 | static void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync); |
093e3f13 | 129 | static void vlv_init_panel_power_sequencer(struct intel_dp *intel_dp); |
a8c3344e VS |
130 | static void vlv_steal_power_sequencer(struct drm_device *dev, |
131 | enum pipe pipe); | |
f21a2198 | 132 | static void intel_dp_unset_edid(struct intel_dp *intel_dp); |
a4fc5ed6 | 133 | |
e0fce78f VS |
134 | static unsigned int intel_dp_unused_lane_mask(int lane_count) |
135 | { | |
136 | return ~((1 << lane_count) - 1) & 0xf; | |
137 | } | |
138 | ||
ed4e9c1d VS |
139 | static int |
140 | intel_dp_max_link_bw(struct intel_dp *intel_dp) | |
a4fc5ed6 | 141 | { |
7183dc29 | 142 | int max_link_bw = intel_dp->dpcd[DP_MAX_LINK_RATE]; |
a4fc5ed6 KP |
143 | |
144 | switch (max_link_bw) { | |
145 | case DP_LINK_BW_1_62: | |
146 | case DP_LINK_BW_2_7: | |
1db10e28 | 147 | case DP_LINK_BW_5_4: |
d4eead50 | 148 | break; |
a4fc5ed6 | 149 | default: |
d4eead50 ID |
150 | WARN(1, "invalid max DP link bw val %x, using 1.62Gbps\n", |
151 | max_link_bw); | |
a4fc5ed6 KP |
152 | max_link_bw = DP_LINK_BW_1_62; |
153 | break; | |
154 | } | |
155 | return max_link_bw; | |
156 | } | |
157 | ||
eeb6324d PZ |
158 | static u8 intel_dp_max_lane_count(struct intel_dp *intel_dp) |
159 | { | |
160 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); | |
eeb6324d PZ |
161 | u8 source_max, sink_max; |
162 | ||
ccb1a831 | 163 | source_max = intel_dig_port->max_lanes; |
eeb6324d PZ |
164 | sink_max = drm_dp_max_lane_count(intel_dp->dpcd); |
165 | ||
166 | return min(source_max, sink_max); | |
167 | } | |
168 | ||
cd9dde44 AJ |
169 | /* |
170 | * The units on the numbers in the next two are... bizarre. Examples will | |
171 | * make it clearer; this one parallels an example in the eDP spec. | |
172 | * | |
173 | * intel_dp_max_data_rate for one lane of 2.7GHz evaluates as: | |
174 | * | |
175 | * 270000 * 1 * 8 / 10 == 216000 | |
176 | * | |
177 | * The actual data capacity of that configuration is 2.16Gbit/s, so the | |
178 | * units are decakilobits. ->clock in a drm_display_mode is in kilohertz - | |
179 | * or equivalently, kilopixels per second - so for 1680x1050R it'd be | |
180 | * 119000. At 18bpp that's 2142000 kilobits per second. | |
181 | * | |
182 | * Thus the strange-looking division by 10 in intel_dp_link_required, to | |
183 | * get the result in decakilobits instead of kilobits. | |
184 | */ | |
185 | ||
a4fc5ed6 | 186 | static int |
c898261c | 187 | intel_dp_link_required(int pixel_clock, int bpp) |
a4fc5ed6 | 188 | { |
cd9dde44 | 189 | return (pixel_clock * bpp + 9) / 10; |
a4fc5ed6 KP |
190 | } |
191 | ||
fe27d53e DA |
192 | static int |
193 | intel_dp_max_data_rate(int max_link_clock, int max_lanes) | |
194 | { | |
195 | return (max_link_clock * max_lanes * 8) / 10; | |
196 | } | |
197 | ||
c19de8eb | 198 | static enum drm_mode_status |
a4fc5ed6 KP |
199 | intel_dp_mode_valid(struct drm_connector *connector, |
200 | struct drm_display_mode *mode) | |
201 | { | |
df0e9248 | 202 | struct intel_dp *intel_dp = intel_attached_dp(connector); |
dd06f90e JN |
203 | struct intel_connector *intel_connector = to_intel_connector(connector); |
204 | struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode; | |
36008365 DV |
205 | int target_clock = mode->clock; |
206 | int max_rate, mode_rate, max_lanes, max_link_clock; | |
799487f5 | 207 | int max_dotclk = to_i915(connector->dev)->max_dotclk_freq; |
a4fc5ed6 | 208 | |
dd06f90e JN |
209 | if (is_edp(intel_dp) && fixed_mode) { |
210 | if (mode->hdisplay > fixed_mode->hdisplay) | |
7de56f43 ZY |
211 | return MODE_PANEL; |
212 | ||
dd06f90e | 213 | if (mode->vdisplay > fixed_mode->vdisplay) |
7de56f43 | 214 | return MODE_PANEL; |
03afc4a2 DV |
215 | |
216 | target_clock = fixed_mode->clock; | |
7de56f43 ZY |
217 | } |
218 | ||
50fec21a | 219 | max_link_clock = intel_dp_max_link_rate(intel_dp); |
eeb6324d | 220 | max_lanes = intel_dp_max_lane_count(intel_dp); |
36008365 DV |
221 | |
222 | max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes); | |
223 | mode_rate = intel_dp_link_required(target_clock, 18); | |
224 | ||
799487f5 | 225 | if (mode_rate > max_rate || target_clock > max_dotclk) |
c4867936 | 226 | return MODE_CLOCK_HIGH; |
a4fc5ed6 KP |
227 | |
228 | if (mode->clock < 10000) | |
229 | return MODE_CLOCK_LOW; | |
230 | ||
0af78a2b DV |
231 | if (mode->flags & DRM_MODE_FLAG_DBLCLK) |
232 | return MODE_H_ILLEGAL; | |
233 | ||
a4fc5ed6 KP |
234 | return MODE_OK; |
235 | } | |
236 | ||
a4f1289e | 237 | uint32_t intel_dp_pack_aux(const uint8_t *src, int src_bytes) |
a4fc5ed6 KP |
238 | { |
239 | int i; | |
240 | uint32_t v = 0; | |
241 | ||
242 | if (src_bytes > 4) | |
243 | src_bytes = 4; | |
244 | for (i = 0; i < src_bytes; i++) | |
245 | v |= ((uint32_t) src[i]) << ((3-i) * 8); | |
246 | return v; | |
247 | } | |
248 | ||
c2af70e2 | 249 | static void intel_dp_unpack_aux(uint32_t src, uint8_t *dst, int dst_bytes) |
a4fc5ed6 KP |
250 | { |
251 | int i; | |
252 | if (dst_bytes > 4) | |
253 | dst_bytes = 4; | |
254 | for (i = 0; i < dst_bytes; i++) | |
255 | dst[i] = src >> ((3-i) * 8); | |
256 | } | |
257 | ||
bf13e81b JN |
258 | static void |
259 | intel_dp_init_panel_power_sequencer(struct drm_device *dev, | |
36b5f425 | 260 | struct intel_dp *intel_dp); |
bf13e81b JN |
261 | static void |
262 | intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev, | |
36b5f425 | 263 | struct intel_dp *intel_dp); |
bf13e81b | 264 | |
773538e8 VS |
265 | static void pps_lock(struct intel_dp *intel_dp) |
266 | { | |
267 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); | |
268 | struct intel_encoder *encoder = &intel_dig_port->base; | |
269 | struct drm_device *dev = encoder->base.dev; | |
270 | struct drm_i915_private *dev_priv = dev->dev_private; | |
271 | enum intel_display_power_domain power_domain; | |
272 | ||
273 | /* | |
274 | * See vlv_power_sequencer_reset() why we need | |
275 | * a power domain reference here. | |
276 | */ | |
25f78f58 | 277 | power_domain = intel_display_port_aux_power_domain(encoder); |
773538e8 VS |
278 | intel_display_power_get(dev_priv, power_domain); |
279 | ||
280 | mutex_lock(&dev_priv->pps_mutex); | |
281 | } | |
282 | ||
283 | static void pps_unlock(struct intel_dp *intel_dp) | |
284 | { | |
285 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); | |
286 | struct intel_encoder *encoder = &intel_dig_port->base; | |
287 | struct drm_device *dev = encoder->base.dev; | |
288 | struct drm_i915_private *dev_priv = dev->dev_private; | |
289 | enum intel_display_power_domain power_domain; | |
290 | ||
291 | mutex_unlock(&dev_priv->pps_mutex); | |
292 | ||
25f78f58 | 293 | power_domain = intel_display_port_aux_power_domain(encoder); |
773538e8 VS |
294 | intel_display_power_put(dev_priv, power_domain); |
295 | } | |
296 | ||
961a0db0 VS |
297 | static void |
298 | vlv_power_sequencer_kick(struct intel_dp *intel_dp) | |
299 | { | |
300 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); | |
301 | struct drm_device *dev = intel_dig_port->base.base.dev; | |
302 | struct drm_i915_private *dev_priv = dev->dev_private; | |
303 | enum pipe pipe = intel_dp->pps_pipe; | |
0047eedc VS |
304 | bool pll_enabled, release_cl_override = false; |
305 | enum dpio_phy phy = DPIO_PHY(pipe); | |
306 | enum dpio_channel ch = vlv_pipe_to_channel(pipe); | |
961a0db0 VS |
307 | uint32_t DP; |
308 | ||
309 | if (WARN(I915_READ(intel_dp->output_reg) & DP_PORT_EN, | |
310 | "skipping pipe %c power seqeuncer kick due to port %c being active\n", | |
311 | pipe_name(pipe), port_name(intel_dig_port->port))) | |
312 | return; | |
313 | ||
314 | DRM_DEBUG_KMS("kicking pipe %c power sequencer for port %c\n", | |
315 | pipe_name(pipe), port_name(intel_dig_port->port)); | |
316 | ||
317 | /* Preserve the BIOS-computed detected bit. This is | |
318 | * supposed to be read-only. | |
319 | */ | |
320 | DP = I915_READ(intel_dp->output_reg) & DP_DETECTED; | |
321 | DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0; | |
322 | DP |= DP_PORT_WIDTH(1); | |
323 | DP |= DP_LINK_TRAIN_PAT_1; | |
324 | ||
325 | if (IS_CHERRYVIEW(dev)) | |
326 | DP |= DP_PIPE_SELECT_CHV(pipe); | |
327 | else if (pipe == PIPE_B) | |
328 | DP |= DP_PIPEB_SELECT; | |
329 | ||
d288f65f VS |
330 | pll_enabled = I915_READ(DPLL(pipe)) & DPLL_VCO_ENABLE; |
331 | ||
332 | /* | |
333 | * The DPLL for the pipe must be enabled for this to work. | |
334 | * So enable temporarily it if it's not already enabled. | |
335 | */ | |
0047eedc VS |
336 | if (!pll_enabled) { |
337 | release_cl_override = IS_CHERRYVIEW(dev) && | |
338 | !chv_phy_powergate_ch(dev_priv, phy, ch, true); | |
339 | ||
3f36b937 TU |
340 | if (vlv_force_pll_on(dev, pipe, IS_CHERRYVIEW(dev) ? |
341 | &chv_dpll[0].dpll : &vlv_dpll[0].dpll)) { | |
342 | DRM_ERROR("Failed to force on pll for pipe %c!\n", | |
343 | pipe_name(pipe)); | |
344 | return; | |
345 | } | |
0047eedc | 346 | } |
d288f65f | 347 | |
961a0db0 VS |
348 | /* |
349 | * Similar magic as in intel_dp_enable_port(). | |
350 | * We _must_ do this port enable + disable trick | |
351 | * to make this power seqeuencer lock onto the port. | |
352 | * Otherwise even VDD force bit won't work. | |
353 | */ | |
354 | I915_WRITE(intel_dp->output_reg, DP); | |
355 | POSTING_READ(intel_dp->output_reg); | |
356 | ||
357 | I915_WRITE(intel_dp->output_reg, DP | DP_PORT_EN); | |
358 | POSTING_READ(intel_dp->output_reg); | |
359 | ||
360 | I915_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN); | |
361 | POSTING_READ(intel_dp->output_reg); | |
d288f65f | 362 | |
0047eedc | 363 | if (!pll_enabled) { |
d288f65f | 364 | vlv_force_pll_off(dev, pipe); |
0047eedc VS |
365 | |
366 | if (release_cl_override) | |
367 | chv_phy_powergate_ch(dev_priv, phy, ch, false); | |
368 | } | |
961a0db0 VS |
369 | } |
370 | ||
bf13e81b JN |
371 | static enum pipe |
372 | vlv_power_sequencer_pipe(struct intel_dp *intel_dp) | |
373 | { | |
374 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); | |
bf13e81b JN |
375 | struct drm_device *dev = intel_dig_port->base.base.dev; |
376 | struct drm_i915_private *dev_priv = dev->dev_private; | |
a4a5d2f8 VS |
377 | struct intel_encoder *encoder; |
378 | unsigned int pipes = (1 << PIPE_A) | (1 << PIPE_B); | |
a8c3344e | 379 | enum pipe pipe; |
bf13e81b | 380 | |
e39b999a | 381 | lockdep_assert_held(&dev_priv->pps_mutex); |
bf13e81b | 382 | |
a8c3344e VS |
383 | /* We should never land here with regular DP ports */ |
384 | WARN_ON(!is_edp(intel_dp)); | |
385 | ||
a4a5d2f8 VS |
386 | if (intel_dp->pps_pipe != INVALID_PIPE) |
387 | return intel_dp->pps_pipe; | |
388 | ||
389 | /* | |
390 | * We don't have power sequencer currently. | |
391 | * Pick one that's not used by other ports. | |
392 | */ | |
19c8054c | 393 | for_each_intel_encoder(dev, encoder) { |
a4a5d2f8 VS |
394 | struct intel_dp *tmp; |
395 | ||
396 | if (encoder->type != INTEL_OUTPUT_EDP) | |
397 | continue; | |
398 | ||
399 | tmp = enc_to_intel_dp(&encoder->base); | |
400 | ||
401 | if (tmp->pps_pipe != INVALID_PIPE) | |
402 | pipes &= ~(1 << tmp->pps_pipe); | |
403 | } | |
404 | ||
405 | /* | |
406 | * Didn't find one. This should not happen since there | |
407 | * are two power sequencers and up to two eDP ports. | |
408 | */ | |
409 | if (WARN_ON(pipes == 0)) | |
a8c3344e VS |
410 | pipe = PIPE_A; |
411 | else | |
412 | pipe = ffs(pipes) - 1; | |
a4a5d2f8 | 413 | |
a8c3344e VS |
414 | vlv_steal_power_sequencer(dev, pipe); |
415 | intel_dp->pps_pipe = pipe; | |
a4a5d2f8 VS |
416 | |
417 | DRM_DEBUG_KMS("picked pipe %c power sequencer for port %c\n", | |
418 | pipe_name(intel_dp->pps_pipe), | |
419 | port_name(intel_dig_port->port)); | |
420 | ||
421 | /* init power sequencer on this pipe and port */ | |
36b5f425 VS |
422 | intel_dp_init_panel_power_sequencer(dev, intel_dp); |
423 | intel_dp_init_panel_power_sequencer_registers(dev, intel_dp); | |
a4a5d2f8 | 424 | |
961a0db0 VS |
425 | /* |
426 | * Even vdd force doesn't work until we've made | |
427 | * the power sequencer lock in on the port. | |
428 | */ | |
429 | vlv_power_sequencer_kick(intel_dp); | |
a4a5d2f8 VS |
430 | |
431 | return intel_dp->pps_pipe; | |
432 | } | |
433 | ||
6491ab27 VS |
434 | typedef bool (*vlv_pipe_check)(struct drm_i915_private *dev_priv, |
435 | enum pipe pipe); | |
436 | ||
437 | static bool vlv_pipe_has_pp_on(struct drm_i915_private *dev_priv, | |
438 | enum pipe pipe) | |
439 | { | |
440 | return I915_READ(VLV_PIPE_PP_STATUS(pipe)) & PP_ON; | |
441 | } | |
442 | ||
443 | static bool vlv_pipe_has_vdd_on(struct drm_i915_private *dev_priv, | |
444 | enum pipe pipe) | |
445 | { | |
446 | return I915_READ(VLV_PIPE_PP_CONTROL(pipe)) & EDP_FORCE_VDD; | |
447 | } | |
448 | ||
449 | static bool vlv_pipe_any(struct drm_i915_private *dev_priv, | |
450 | enum pipe pipe) | |
451 | { | |
452 | return true; | |
453 | } | |
bf13e81b | 454 | |
a4a5d2f8 | 455 | static enum pipe |
6491ab27 VS |
456 | vlv_initial_pps_pipe(struct drm_i915_private *dev_priv, |
457 | enum port port, | |
458 | vlv_pipe_check pipe_check) | |
a4a5d2f8 VS |
459 | { |
460 | enum pipe pipe; | |
bf13e81b | 461 | |
bf13e81b JN |
462 | for (pipe = PIPE_A; pipe <= PIPE_B; pipe++) { |
463 | u32 port_sel = I915_READ(VLV_PIPE_PP_ON_DELAYS(pipe)) & | |
464 | PANEL_PORT_SELECT_MASK; | |
a4a5d2f8 VS |
465 | |
466 | if (port_sel != PANEL_PORT_SELECT_VLV(port)) | |
467 | continue; | |
468 | ||
6491ab27 VS |
469 | if (!pipe_check(dev_priv, pipe)) |
470 | continue; | |
471 | ||
a4a5d2f8 | 472 | return pipe; |
bf13e81b JN |
473 | } |
474 | ||
a4a5d2f8 VS |
475 | return INVALID_PIPE; |
476 | } | |
477 | ||
478 | static void | |
479 | vlv_initial_power_sequencer_setup(struct intel_dp *intel_dp) | |
480 | { | |
481 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); | |
482 | struct drm_device *dev = intel_dig_port->base.base.dev; | |
483 | struct drm_i915_private *dev_priv = dev->dev_private; | |
a4a5d2f8 VS |
484 | enum port port = intel_dig_port->port; |
485 | ||
486 | lockdep_assert_held(&dev_priv->pps_mutex); | |
487 | ||
488 | /* try to find a pipe with this port selected */ | |
6491ab27 VS |
489 | /* first pick one where the panel is on */ |
490 | intel_dp->pps_pipe = vlv_initial_pps_pipe(dev_priv, port, | |
491 | vlv_pipe_has_pp_on); | |
492 | /* didn't find one? pick one where vdd is on */ | |
493 | if (intel_dp->pps_pipe == INVALID_PIPE) | |
494 | intel_dp->pps_pipe = vlv_initial_pps_pipe(dev_priv, port, | |
495 | vlv_pipe_has_vdd_on); | |
496 | /* didn't find one? pick one with just the correct port */ | |
497 | if (intel_dp->pps_pipe == INVALID_PIPE) | |
498 | intel_dp->pps_pipe = vlv_initial_pps_pipe(dev_priv, port, | |
499 | vlv_pipe_any); | |
a4a5d2f8 VS |
500 | |
501 | /* didn't find one? just let vlv_power_sequencer_pipe() pick one when needed */ | |
502 | if (intel_dp->pps_pipe == INVALID_PIPE) { | |
503 | DRM_DEBUG_KMS("no initial power sequencer for port %c\n", | |
504 | port_name(port)); | |
505 | return; | |
bf13e81b JN |
506 | } |
507 | ||
a4a5d2f8 VS |
508 | DRM_DEBUG_KMS("initial power sequencer for port %c: pipe %c\n", |
509 | port_name(port), pipe_name(intel_dp->pps_pipe)); | |
510 | ||
36b5f425 VS |
511 | intel_dp_init_panel_power_sequencer(dev, intel_dp); |
512 | intel_dp_init_panel_power_sequencer_registers(dev, intel_dp); | |
bf13e81b JN |
513 | } |
514 | ||
773538e8 VS |
515 | void vlv_power_sequencer_reset(struct drm_i915_private *dev_priv) |
516 | { | |
517 | struct drm_device *dev = dev_priv->dev; | |
518 | struct intel_encoder *encoder; | |
519 | ||
666a4537 | 520 | if (WARN_ON(!IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev))) |
773538e8 VS |
521 | return; |
522 | ||
523 | /* | |
524 | * We can't grab pps_mutex here due to deadlock with power_domain | |
525 | * mutex when power_domain functions are called while holding pps_mutex. | |
526 | * That also means that in order to use pps_pipe the code needs to | |
527 | * hold both a power domain reference and pps_mutex, and the power domain | |
528 | * reference get/put must be done while _not_ holding pps_mutex. | |
529 | * pps_{lock,unlock}() do these steps in the correct order, so one | |
530 | * should use them always. | |
531 | */ | |
532 | ||
19c8054c | 533 | for_each_intel_encoder(dev, encoder) { |
773538e8 VS |
534 | struct intel_dp *intel_dp; |
535 | ||
536 | if (encoder->type != INTEL_OUTPUT_EDP) | |
537 | continue; | |
538 | ||
539 | intel_dp = enc_to_intel_dp(&encoder->base); | |
540 | intel_dp->pps_pipe = INVALID_PIPE; | |
541 | } | |
bf13e81b JN |
542 | } |
543 | ||
f0f59a00 VS |
544 | static i915_reg_t |
545 | _pp_ctrl_reg(struct intel_dp *intel_dp) | |
bf13e81b JN |
546 | { |
547 | struct drm_device *dev = intel_dp_to_dev(intel_dp); | |
548 | ||
b0a08bec VK |
549 | if (IS_BROXTON(dev)) |
550 | return BXT_PP_CONTROL(0); | |
551 | else if (HAS_PCH_SPLIT(dev)) | |
bf13e81b JN |
552 | return PCH_PP_CONTROL; |
553 | else | |
554 | return VLV_PIPE_PP_CONTROL(vlv_power_sequencer_pipe(intel_dp)); | |
555 | } | |
556 | ||
f0f59a00 VS |
557 | static i915_reg_t |
558 | _pp_stat_reg(struct intel_dp *intel_dp) | |
bf13e81b JN |
559 | { |
560 | struct drm_device *dev = intel_dp_to_dev(intel_dp); | |
561 | ||
b0a08bec VK |
562 | if (IS_BROXTON(dev)) |
563 | return BXT_PP_STATUS(0); | |
564 | else if (HAS_PCH_SPLIT(dev)) | |
bf13e81b JN |
565 | return PCH_PP_STATUS; |
566 | else | |
567 | return VLV_PIPE_PP_STATUS(vlv_power_sequencer_pipe(intel_dp)); | |
568 | } | |
569 | ||
01527b31 CT |
570 | /* Reboot notifier handler to shutdown panel power to guarantee T12 timing |
571 | This function only applicable when panel PM state is not to be tracked */ | |
572 | static int edp_notify_handler(struct notifier_block *this, unsigned long code, | |
573 | void *unused) | |
574 | { | |
575 | struct intel_dp *intel_dp = container_of(this, typeof(* intel_dp), | |
576 | edp_notifier); | |
577 | struct drm_device *dev = intel_dp_to_dev(intel_dp); | |
578 | struct drm_i915_private *dev_priv = dev->dev_private; | |
01527b31 CT |
579 | |
580 | if (!is_edp(intel_dp) || code != SYS_RESTART) | |
581 | return 0; | |
582 | ||
773538e8 | 583 | pps_lock(intel_dp); |
e39b999a | 584 | |
666a4537 | 585 | if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) { |
e39b999a | 586 | enum pipe pipe = vlv_power_sequencer_pipe(intel_dp); |
f0f59a00 | 587 | i915_reg_t pp_ctrl_reg, pp_div_reg; |
649636ef | 588 | u32 pp_div; |
e39b999a | 589 | |
01527b31 CT |
590 | pp_ctrl_reg = VLV_PIPE_PP_CONTROL(pipe); |
591 | pp_div_reg = VLV_PIPE_PP_DIVISOR(pipe); | |
592 | pp_div = I915_READ(pp_div_reg); | |
593 | pp_div &= PP_REFERENCE_DIVIDER_MASK; | |
594 | ||
595 | /* 0x1F write to PP_DIV_REG sets max cycle delay */ | |
596 | I915_WRITE(pp_div_reg, pp_div | 0x1F); | |
597 | I915_WRITE(pp_ctrl_reg, PANEL_UNLOCK_REGS | PANEL_POWER_OFF); | |
598 | msleep(intel_dp->panel_power_cycle_delay); | |
599 | } | |
600 | ||
773538e8 | 601 | pps_unlock(intel_dp); |
e39b999a | 602 | |
01527b31 CT |
603 | return 0; |
604 | } | |
605 | ||
4be73780 | 606 | static bool edp_have_panel_power(struct intel_dp *intel_dp) |
ebf33b18 | 607 | { |
30add22d | 608 | struct drm_device *dev = intel_dp_to_dev(intel_dp); |
ebf33b18 KP |
609 | struct drm_i915_private *dev_priv = dev->dev_private; |
610 | ||
e39b999a VS |
611 | lockdep_assert_held(&dev_priv->pps_mutex); |
612 | ||
666a4537 | 613 | if ((IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) && |
9a42356b VS |
614 | intel_dp->pps_pipe == INVALID_PIPE) |
615 | return false; | |
616 | ||
bf13e81b | 617 | return (I915_READ(_pp_stat_reg(intel_dp)) & PP_ON) != 0; |
ebf33b18 KP |
618 | } |
619 | ||
4be73780 | 620 | static bool edp_have_panel_vdd(struct intel_dp *intel_dp) |
ebf33b18 | 621 | { |
30add22d | 622 | struct drm_device *dev = intel_dp_to_dev(intel_dp); |
ebf33b18 KP |
623 | struct drm_i915_private *dev_priv = dev->dev_private; |
624 | ||
e39b999a VS |
625 | lockdep_assert_held(&dev_priv->pps_mutex); |
626 | ||
666a4537 | 627 | if ((IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) && |
9a42356b VS |
628 | intel_dp->pps_pipe == INVALID_PIPE) |
629 | return false; | |
630 | ||
773538e8 | 631 | return I915_READ(_pp_ctrl_reg(intel_dp)) & EDP_FORCE_VDD; |
ebf33b18 KP |
632 | } |
633 | ||
9b984dae KP |
634 | static void |
635 | intel_dp_check_edp(struct intel_dp *intel_dp) | |
636 | { | |
30add22d | 637 | struct drm_device *dev = intel_dp_to_dev(intel_dp); |
9b984dae | 638 | struct drm_i915_private *dev_priv = dev->dev_private; |
ebf33b18 | 639 | |
9b984dae KP |
640 | if (!is_edp(intel_dp)) |
641 | return; | |
453c5420 | 642 | |
4be73780 | 643 | if (!edp_have_panel_power(intel_dp) && !edp_have_panel_vdd(intel_dp)) { |
9b984dae KP |
644 | WARN(1, "eDP powered off while attempting aux channel communication.\n"); |
645 | DRM_DEBUG_KMS("Status 0x%08x Control 0x%08x\n", | |
bf13e81b JN |
646 | I915_READ(_pp_stat_reg(intel_dp)), |
647 | I915_READ(_pp_ctrl_reg(intel_dp))); | |
9b984dae KP |
648 | } |
649 | } | |
650 | ||
9ee32fea DV |
651 | static uint32_t |
652 | intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq) | |
653 | { | |
654 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); | |
655 | struct drm_device *dev = intel_dig_port->base.base.dev; | |
656 | struct drm_i915_private *dev_priv = dev->dev_private; | |
f0f59a00 | 657 | i915_reg_t ch_ctl = intel_dp->aux_ch_ctl_reg; |
9ee32fea DV |
658 | uint32_t status; |
659 | bool done; | |
660 | ||
ef04f00d | 661 | #define C (((status = I915_READ_NOTRACE(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0) |
9ee32fea | 662 | if (has_aux_irq) |
b18ac466 | 663 | done = wait_event_timeout(dev_priv->gmbus_wait_queue, C, |
3598706b | 664 | msecs_to_jiffies_timeout(10)); |
9ee32fea DV |
665 | else |
666 | done = wait_for_atomic(C, 10) == 0; | |
667 | if (!done) | |
668 | DRM_ERROR("dp aux hw did not signal timeout (has irq: %i)!\n", | |
669 | has_aux_irq); | |
670 | #undef C | |
671 | ||
672 | return status; | |
673 | } | |
674 | ||
6ffb1be7 | 675 | static uint32_t g4x_get_aux_clock_divider(struct intel_dp *intel_dp, int index) |
a4fc5ed6 | 676 | { |
174edf1f | 677 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
e7dc33f3 | 678 | struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev); |
9ee32fea | 679 | |
a457f54b VS |
680 | if (index) |
681 | return 0; | |
682 | ||
ec5b01dd DL |
683 | /* |
684 | * The clock divider is based off the hrawclk, and would like to run at | |
a457f54b | 685 | * 2MHz. So, take the hrawclk value and divide by 2000 and use that |
a4fc5ed6 | 686 | */ |
a457f54b | 687 | return DIV_ROUND_CLOSEST(dev_priv->rawclk_freq, 2000); |
ec5b01dd DL |
688 | } |
689 | ||
690 | static uint32_t ilk_get_aux_clock_divider(struct intel_dp *intel_dp, int index) | |
691 | { | |
692 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); | |
a457f54b | 693 | struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev); |
ec5b01dd DL |
694 | |
695 | if (index) | |
696 | return 0; | |
697 | ||
a457f54b VS |
698 | /* |
699 | * The clock divider is based off the cdclk or PCH rawclk, and would | |
700 | * like to run at 2MHz. So, take the cdclk or PCH rawclk value and | |
701 | * divide by 2000 and use that | |
702 | */ | |
e7dc33f3 | 703 | if (intel_dig_port->port == PORT_A) |
fce18c4c | 704 | return DIV_ROUND_CLOSEST(dev_priv->cdclk_freq, 2000); |
e7dc33f3 VS |
705 | else |
706 | return DIV_ROUND_CLOSEST(dev_priv->rawclk_freq, 2000); | |
ec5b01dd DL |
707 | } |
708 | ||
709 | static uint32_t hsw_get_aux_clock_divider(struct intel_dp *intel_dp, int index) | |
710 | { | |
711 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); | |
a457f54b | 712 | struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev); |
ec5b01dd | 713 | |
a457f54b | 714 | if (intel_dig_port->port != PORT_A && HAS_PCH_LPT_H(dev_priv)) { |
2c55c336 | 715 | /* Workaround for non-ULT HSW */ |
bc86625a CW |
716 | switch (index) { |
717 | case 0: return 63; | |
718 | case 1: return 72; | |
719 | default: return 0; | |
720 | } | |
2c55c336 | 721 | } |
a457f54b VS |
722 | |
723 | return ilk_get_aux_clock_divider(intel_dp, index); | |
b84a1cf8 RV |
724 | } |
725 | ||
b6b5e383 DL |
726 | static uint32_t skl_get_aux_clock_divider(struct intel_dp *intel_dp, int index) |
727 | { | |
728 | /* | |
729 | * SKL doesn't need us to program the AUX clock divider (Hardware will | |
730 | * derive the clock from CDCLK automatically). We still implement the | |
731 | * get_aux_clock_divider vfunc to plug-in into the existing code. | |
732 | */ | |
733 | return index ? 0 : 1; | |
734 | } | |
735 | ||
6ffb1be7 VS |
736 | static uint32_t g4x_get_aux_send_ctl(struct intel_dp *intel_dp, |
737 | bool has_aux_irq, | |
738 | int send_bytes, | |
739 | uint32_t aux_clock_divider) | |
5ed12a19 DL |
740 | { |
741 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); | |
742 | struct drm_device *dev = intel_dig_port->base.base.dev; | |
743 | uint32_t precharge, timeout; | |
744 | ||
745 | if (IS_GEN6(dev)) | |
746 | precharge = 3; | |
747 | else | |
748 | precharge = 5; | |
749 | ||
f3c6a3a7 | 750 | if (IS_BROADWELL(dev) && intel_dig_port->port == PORT_A) |
5ed12a19 DL |
751 | timeout = DP_AUX_CH_CTL_TIME_OUT_600us; |
752 | else | |
753 | timeout = DP_AUX_CH_CTL_TIME_OUT_400us; | |
754 | ||
755 | return DP_AUX_CH_CTL_SEND_BUSY | | |
788d4433 | 756 | DP_AUX_CH_CTL_DONE | |
5ed12a19 | 757 | (has_aux_irq ? DP_AUX_CH_CTL_INTERRUPT : 0) | |
788d4433 | 758 | DP_AUX_CH_CTL_TIME_OUT_ERROR | |
5ed12a19 | 759 | timeout | |
788d4433 | 760 | DP_AUX_CH_CTL_RECEIVE_ERROR | |
5ed12a19 DL |
761 | (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) | |
762 | (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) | | |
788d4433 | 763 | (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT); |
5ed12a19 DL |
764 | } |
765 | ||
b9ca5fad DL |
766 | static uint32_t skl_get_aux_send_ctl(struct intel_dp *intel_dp, |
767 | bool has_aux_irq, | |
768 | int send_bytes, | |
769 | uint32_t unused) | |
770 | { | |
771 | return DP_AUX_CH_CTL_SEND_BUSY | | |
772 | DP_AUX_CH_CTL_DONE | | |
773 | (has_aux_irq ? DP_AUX_CH_CTL_INTERRUPT : 0) | | |
774 | DP_AUX_CH_CTL_TIME_OUT_ERROR | | |
775 | DP_AUX_CH_CTL_TIME_OUT_1600us | | |
776 | DP_AUX_CH_CTL_RECEIVE_ERROR | | |
777 | (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) | | |
778 | DP_AUX_CH_CTL_SYNC_PULSE_SKL(32); | |
779 | } | |
780 | ||
b84a1cf8 RV |
781 | static int |
782 | intel_dp_aux_ch(struct intel_dp *intel_dp, | |
bd9f74a5 | 783 | const uint8_t *send, int send_bytes, |
b84a1cf8 RV |
784 | uint8_t *recv, int recv_size) |
785 | { | |
786 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); | |
787 | struct drm_device *dev = intel_dig_port->base.base.dev; | |
788 | struct drm_i915_private *dev_priv = dev->dev_private; | |
f0f59a00 | 789 | i915_reg_t ch_ctl = intel_dp->aux_ch_ctl_reg; |
bc86625a | 790 | uint32_t aux_clock_divider; |
b84a1cf8 RV |
791 | int i, ret, recv_bytes; |
792 | uint32_t status; | |
5ed12a19 | 793 | int try, clock = 0; |
4e6b788c | 794 | bool has_aux_irq = HAS_AUX_IRQ(dev); |
884f19e9 JN |
795 | bool vdd; |
796 | ||
773538e8 | 797 | pps_lock(intel_dp); |
e39b999a | 798 | |
72c3500a VS |
799 | /* |
800 | * We will be called with VDD already enabled for dpcd/edid/oui reads. | |
801 | * In such cases we want to leave VDD enabled and it's up to upper layers | |
802 | * to turn it off. But for eg. i2c-dev access we need to turn it on/off | |
803 | * ourselves. | |
804 | */ | |
1e0560e0 | 805 | vdd = edp_panel_vdd_on(intel_dp); |
b84a1cf8 RV |
806 | |
807 | /* dp aux is extremely sensitive to irq latency, hence request the | |
808 | * lowest possible wakeup latency and so prevent the cpu from going into | |
809 | * deep sleep states. | |
810 | */ | |
811 | pm_qos_update_request(&dev_priv->pm_qos, 0); | |
812 | ||
813 | intel_dp_check_edp(intel_dp); | |
5eb08b69 | 814 | |
11bee43e JB |
815 | /* Try to wait for any previous AUX channel activity */ |
816 | for (try = 0; try < 3; try++) { | |
ef04f00d | 817 | status = I915_READ_NOTRACE(ch_ctl); |
11bee43e JB |
818 | if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0) |
819 | break; | |
820 | msleep(1); | |
821 | } | |
822 | ||
823 | if (try == 3) { | |
02196c77 MK |
824 | static u32 last_status = -1; |
825 | const u32 status = I915_READ(ch_ctl); | |
826 | ||
827 | if (status != last_status) { | |
828 | WARN(1, "dp_aux_ch not started status 0x%08x\n", | |
829 | status); | |
830 | last_status = status; | |
831 | } | |
832 | ||
9ee32fea DV |
833 | ret = -EBUSY; |
834 | goto out; | |
4f7f7b7e CW |
835 | } |
836 | ||
46a5ae9f PZ |
837 | /* Only 5 data registers! */ |
838 | if (WARN_ON(send_bytes > 20 || recv_size > 20)) { | |
839 | ret = -E2BIG; | |
840 | goto out; | |
841 | } | |
842 | ||
ec5b01dd | 843 | while ((aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, clock++))) { |
153b1100 DL |
844 | u32 send_ctl = intel_dp->get_aux_send_ctl(intel_dp, |
845 | has_aux_irq, | |
846 | send_bytes, | |
847 | aux_clock_divider); | |
5ed12a19 | 848 | |
bc86625a CW |
849 | /* Must try at least 3 times according to DP spec */ |
850 | for (try = 0; try < 5; try++) { | |
851 | /* Load the send data into the aux channel data registers */ | |
852 | for (i = 0; i < send_bytes; i += 4) | |
330e20ec | 853 | I915_WRITE(intel_dp->aux_ch_data_reg[i >> 2], |
a4f1289e RV |
854 | intel_dp_pack_aux(send + i, |
855 | send_bytes - i)); | |
bc86625a CW |
856 | |
857 | /* Send the command and wait for it to complete */ | |
5ed12a19 | 858 | I915_WRITE(ch_ctl, send_ctl); |
bc86625a CW |
859 | |
860 | status = intel_dp_aux_wait_done(intel_dp, has_aux_irq); | |
861 | ||
862 | /* Clear done status and any errors */ | |
863 | I915_WRITE(ch_ctl, | |
864 | status | | |
865 | DP_AUX_CH_CTL_DONE | | |
866 | DP_AUX_CH_CTL_TIME_OUT_ERROR | | |
867 | DP_AUX_CH_CTL_RECEIVE_ERROR); | |
868 | ||
74ebf294 | 869 | if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) |
bc86625a | 870 | continue; |
74ebf294 TP |
871 | |
872 | /* DP CTS 1.2 Core Rev 1.1, 4.2.1.1 & 4.2.1.2 | |
873 | * 400us delay required for errors and timeouts | |
874 | * Timeout errors from the HW already meet this | |
875 | * requirement so skip to next iteration | |
876 | */ | |
877 | if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) { | |
878 | usleep_range(400, 500); | |
bc86625a | 879 | continue; |
74ebf294 | 880 | } |
bc86625a | 881 | if (status & DP_AUX_CH_CTL_DONE) |
e058c945 | 882 | goto done; |
bc86625a | 883 | } |
a4fc5ed6 KP |
884 | } |
885 | ||
a4fc5ed6 | 886 | if ((status & DP_AUX_CH_CTL_DONE) == 0) { |
1ae8c0a5 | 887 | DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status); |
9ee32fea DV |
888 | ret = -EBUSY; |
889 | goto out; | |
a4fc5ed6 KP |
890 | } |
891 | ||
e058c945 | 892 | done: |
a4fc5ed6 KP |
893 | /* Check for timeout or receive error. |
894 | * Timeouts occur when the sink is not connected | |
895 | */ | |
a5b3da54 | 896 | if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) { |
1ae8c0a5 | 897 | DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status); |
9ee32fea DV |
898 | ret = -EIO; |
899 | goto out; | |
a5b3da54 | 900 | } |
1ae8c0a5 KP |
901 | |
902 | /* Timeouts occur when the device isn't connected, so they're | |
903 | * "normal" -- don't fill the kernel log with these */ | |
a5b3da54 | 904 | if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) { |
28c97730 | 905 | DRM_DEBUG_KMS("dp_aux_ch timeout status 0x%08x\n", status); |
9ee32fea DV |
906 | ret = -ETIMEDOUT; |
907 | goto out; | |
a4fc5ed6 KP |
908 | } |
909 | ||
910 | /* Unload any bytes sent back from the other side */ | |
911 | recv_bytes = ((status & DP_AUX_CH_CTL_MESSAGE_SIZE_MASK) >> | |
912 | DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT); | |
14e01889 RV |
913 | |
914 | /* | |
915 | * By BSpec: "Message sizes of 0 or >20 are not allowed." | |
916 | * We have no idea of what happened so we return -EBUSY so | |
917 | * drm layer takes care for the necessary retries. | |
918 | */ | |
919 | if (recv_bytes == 0 || recv_bytes > 20) { | |
920 | DRM_DEBUG_KMS("Forbidden recv_bytes = %d on aux transaction\n", | |
921 | recv_bytes); | |
922 | /* | |
923 | * FIXME: This patch was created on top of a series that | |
924 | * organize the retries at drm level. There EBUSY should | |
925 | * also take care for 1ms wait before retrying. | |
926 | * That aux retries re-org is still needed and after that is | |
927 | * merged we remove this sleep from here. | |
928 | */ | |
929 | usleep_range(1000, 1500); | |
930 | ret = -EBUSY; | |
931 | goto out; | |
932 | } | |
933 | ||
a4fc5ed6 KP |
934 | if (recv_bytes > recv_size) |
935 | recv_bytes = recv_size; | |
0206e353 | 936 | |
4f7f7b7e | 937 | for (i = 0; i < recv_bytes; i += 4) |
330e20ec | 938 | intel_dp_unpack_aux(I915_READ(intel_dp->aux_ch_data_reg[i >> 2]), |
a4f1289e | 939 | recv + i, recv_bytes - i); |
a4fc5ed6 | 940 | |
9ee32fea DV |
941 | ret = recv_bytes; |
942 | out: | |
943 | pm_qos_update_request(&dev_priv->pm_qos, PM_QOS_DEFAULT_VALUE); | |
944 | ||
884f19e9 JN |
945 | if (vdd) |
946 | edp_panel_vdd_off(intel_dp, false); | |
947 | ||
773538e8 | 948 | pps_unlock(intel_dp); |
e39b999a | 949 | |
9ee32fea | 950 | return ret; |
a4fc5ed6 KP |
951 | } |
952 | ||
a6c8aff0 JN |
953 | #define BARE_ADDRESS_SIZE 3 |
954 | #define HEADER_SIZE (BARE_ADDRESS_SIZE + 1) | |
9d1a1031 JN |
955 | static ssize_t |
956 | intel_dp_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg) | |
a4fc5ed6 | 957 | { |
9d1a1031 JN |
958 | struct intel_dp *intel_dp = container_of(aux, struct intel_dp, aux); |
959 | uint8_t txbuf[20], rxbuf[20]; | |
960 | size_t txsize, rxsize; | |
a4fc5ed6 | 961 | int ret; |
a4fc5ed6 | 962 | |
d2d9cbbd VS |
963 | txbuf[0] = (msg->request << 4) | |
964 | ((msg->address >> 16) & 0xf); | |
965 | txbuf[1] = (msg->address >> 8) & 0xff; | |
9d1a1031 JN |
966 | txbuf[2] = msg->address & 0xff; |
967 | txbuf[3] = msg->size - 1; | |
46a5ae9f | 968 | |
9d1a1031 JN |
969 | switch (msg->request & ~DP_AUX_I2C_MOT) { |
970 | case DP_AUX_NATIVE_WRITE: | |
971 | case DP_AUX_I2C_WRITE: | |
c1e74122 | 972 | case DP_AUX_I2C_WRITE_STATUS_UPDATE: |
a6c8aff0 | 973 | txsize = msg->size ? HEADER_SIZE + msg->size : BARE_ADDRESS_SIZE; |
a1ddefd8 | 974 | rxsize = 2; /* 0 or 1 data bytes */ |
f51a44b9 | 975 | |
9d1a1031 JN |
976 | if (WARN_ON(txsize > 20)) |
977 | return -E2BIG; | |
a4fc5ed6 | 978 | |
d81a67cc ID |
979 | if (msg->buffer) |
980 | memcpy(txbuf + HEADER_SIZE, msg->buffer, msg->size); | |
981 | else | |
982 | WARN_ON(msg->size); | |
a4fc5ed6 | 983 | |
9d1a1031 JN |
984 | ret = intel_dp_aux_ch(intel_dp, txbuf, txsize, rxbuf, rxsize); |
985 | if (ret > 0) { | |
986 | msg->reply = rxbuf[0] >> 4; | |
a4fc5ed6 | 987 | |
a1ddefd8 JN |
988 | if (ret > 1) { |
989 | /* Number of bytes written in a short write. */ | |
990 | ret = clamp_t(int, rxbuf[1], 0, msg->size); | |
991 | } else { | |
992 | /* Return payload size. */ | |
993 | ret = msg->size; | |
994 | } | |
9d1a1031 JN |
995 | } |
996 | break; | |
46a5ae9f | 997 | |
9d1a1031 JN |
998 | case DP_AUX_NATIVE_READ: |
999 | case DP_AUX_I2C_READ: | |
a6c8aff0 | 1000 | txsize = msg->size ? HEADER_SIZE : BARE_ADDRESS_SIZE; |
9d1a1031 | 1001 | rxsize = msg->size + 1; |
a4fc5ed6 | 1002 | |
9d1a1031 JN |
1003 | if (WARN_ON(rxsize > 20)) |
1004 | return -E2BIG; | |
a4fc5ed6 | 1005 | |
9d1a1031 JN |
1006 | ret = intel_dp_aux_ch(intel_dp, txbuf, txsize, rxbuf, rxsize); |
1007 | if (ret > 0) { | |
1008 | msg->reply = rxbuf[0] >> 4; | |
1009 | /* | |
1010 | * Assume happy day, and copy the data. The caller is | |
1011 | * expected to check msg->reply before touching it. | |
1012 | * | |
1013 | * Return payload size. | |
1014 | */ | |
1015 | ret--; | |
1016 | memcpy(msg->buffer, rxbuf + 1, ret); | |
a4fc5ed6 | 1017 | } |
9d1a1031 JN |
1018 | break; |
1019 | ||
1020 | default: | |
1021 | ret = -EINVAL; | |
1022 | break; | |
a4fc5ed6 | 1023 | } |
f51a44b9 | 1024 | |
9d1a1031 | 1025 | return ret; |
a4fc5ed6 KP |
1026 | } |
1027 | ||
f0f59a00 VS |
1028 | static i915_reg_t g4x_aux_ctl_reg(struct drm_i915_private *dev_priv, |
1029 | enum port port) | |
da00bdcf VS |
1030 | { |
1031 | switch (port) { | |
1032 | case PORT_B: | |
1033 | case PORT_C: | |
1034 | case PORT_D: | |
1035 | return DP_AUX_CH_CTL(port); | |
1036 | default: | |
1037 | MISSING_CASE(port); | |
1038 | return DP_AUX_CH_CTL(PORT_B); | |
1039 | } | |
1040 | } | |
1041 | ||
f0f59a00 VS |
1042 | static i915_reg_t g4x_aux_data_reg(struct drm_i915_private *dev_priv, |
1043 | enum port port, int index) | |
330e20ec VS |
1044 | { |
1045 | switch (port) { | |
1046 | case PORT_B: | |
1047 | case PORT_C: | |
1048 | case PORT_D: | |
1049 | return DP_AUX_CH_DATA(port, index); | |
1050 | default: | |
1051 | MISSING_CASE(port); | |
1052 | return DP_AUX_CH_DATA(PORT_B, index); | |
1053 | } | |
1054 | } | |
1055 | ||
f0f59a00 VS |
1056 | static i915_reg_t ilk_aux_ctl_reg(struct drm_i915_private *dev_priv, |
1057 | enum port port) | |
da00bdcf VS |
1058 | { |
1059 | switch (port) { | |
1060 | case PORT_A: | |
1061 | return DP_AUX_CH_CTL(port); | |
1062 | case PORT_B: | |
1063 | case PORT_C: | |
1064 | case PORT_D: | |
1065 | return PCH_DP_AUX_CH_CTL(port); | |
1066 | default: | |
1067 | MISSING_CASE(port); | |
1068 | return DP_AUX_CH_CTL(PORT_A); | |
1069 | } | |
1070 | } | |
1071 | ||
f0f59a00 VS |
1072 | static i915_reg_t ilk_aux_data_reg(struct drm_i915_private *dev_priv, |
1073 | enum port port, int index) | |
330e20ec VS |
1074 | { |
1075 | switch (port) { | |
1076 | case PORT_A: | |
1077 | return DP_AUX_CH_DATA(port, index); | |
1078 | case PORT_B: | |
1079 | case PORT_C: | |
1080 | case PORT_D: | |
1081 | return PCH_DP_AUX_CH_DATA(port, index); | |
1082 | default: | |
1083 | MISSING_CASE(port); | |
1084 | return DP_AUX_CH_DATA(PORT_A, index); | |
1085 | } | |
1086 | } | |
1087 | ||
da00bdcf VS |
1088 | /* |
1089 | * On SKL we don't have Aux for port E so we rely | |
1090 | * on VBT to set a proper alternate aux channel. | |
1091 | */ | |
1092 | static enum port skl_porte_aux_port(struct drm_i915_private *dev_priv) | |
1093 | { | |
1094 | const struct ddi_vbt_port_info *info = | |
1095 | &dev_priv->vbt.ddi_port_info[PORT_E]; | |
1096 | ||
1097 | switch (info->alternate_aux_channel) { | |
1098 | case DP_AUX_A: | |
1099 | return PORT_A; | |
1100 | case DP_AUX_B: | |
1101 | return PORT_B; | |
1102 | case DP_AUX_C: | |
1103 | return PORT_C; | |
1104 | case DP_AUX_D: | |
1105 | return PORT_D; | |
1106 | default: | |
1107 | MISSING_CASE(info->alternate_aux_channel); | |
1108 | return PORT_A; | |
1109 | } | |
1110 | } | |
1111 | ||
f0f59a00 VS |
1112 | static i915_reg_t skl_aux_ctl_reg(struct drm_i915_private *dev_priv, |
1113 | enum port port) | |
da00bdcf VS |
1114 | { |
1115 | if (port == PORT_E) | |
1116 | port = skl_porte_aux_port(dev_priv); | |
1117 | ||
1118 | switch (port) { | |
1119 | case PORT_A: | |
1120 | case PORT_B: | |
1121 | case PORT_C: | |
1122 | case PORT_D: | |
1123 | return DP_AUX_CH_CTL(port); | |
1124 | default: | |
1125 | MISSING_CASE(port); | |
1126 | return DP_AUX_CH_CTL(PORT_A); | |
1127 | } | |
1128 | } | |
1129 | ||
f0f59a00 VS |
1130 | static i915_reg_t skl_aux_data_reg(struct drm_i915_private *dev_priv, |
1131 | enum port port, int index) | |
330e20ec VS |
1132 | { |
1133 | if (port == PORT_E) | |
1134 | port = skl_porte_aux_port(dev_priv); | |
1135 | ||
1136 | switch (port) { | |
1137 | case PORT_A: | |
1138 | case PORT_B: | |
1139 | case PORT_C: | |
1140 | case PORT_D: | |
1141 | return DP_AUX_CH_DATA(port, index); | |
1142 | default: | |
1143 | MISSING_CASE(port); | |
1144 | return DP_AUX_CH_DATA(PORT_A, index); | |
1145 | } | |
1146 | } | |
1147 | ||
f0f59a00 VS |
1148 | static i915_reg_t intel_aux_ctl_reg(struct drm_i915_private *dev_priv, |
1149 | enum port port) | |
330e20ec VS |
1150 | { |
1151 | if (INTEL_INFO(dev_priv)->gen >= 9) | |
1152 | return skl_aux_ctl_reg(dev_priv, port); | |
1153 | else if (HAS_PCH_SPLIT(dev_priv)) | |
1154 | return ilk_aux_ctl_reg(dev_priv, port); | |
1155 | else | |
1156 | return g4x_aux_ctl_reg(dev_priv, port); | |
1157 | } | |
1158 | ||
f0f59a00 VS |
1159 | static i915_reg_t intel_aux_data_reg(struct drm_i915_private *dev_priv, |
1160 | enum port port, int index) | |
330e20ec VS |
1161 | { |
1162 | if (INTEL_INFO(dev_priv)->gen >= 9) | |
1163 | return skl_aux_data_reg(dev_priv, port, index); | |
1164 | else if (HAS_PCH_SPLIT(dev_priv)) | |
1165 | return ilk_aux_data_reg(dev_priv, port, index); | |
1166 | else | |
1167 | return g4x_aux_data_reg(dev_priv, port, index); | |
1168 | } | |
1169 | ||
1170 | static void intel_aux_reg_init(struct intel_dp *intel_dp) | |
1171 | { | |
1172 | struct drm_i915_private *dev_priv = to_i915(intel_dp_to_dev(intel_dp)); | |
1173 | enum port port = dp_to_dig_port(intel_dp)->port; | |
1174 | int i; | |
1175 | ||
1176 | intel_dp->aux_ch_ctl_reg = intel_aux_ctl_reg(dev_priv, port); | |
1177 | for (i = 0; i < ARRAY_SIZE(intel_dp->aux_ch_data_reg); i++) | |
1178 | intel_dp->aux_ch_data_reg[i] = intel_aux_data_reg(dev_priv, port, i); | |
1179 | } | |
1180 | ||
9d1a1031 | 1181 | static void |
a121f4e5 VS |
1182 | intel_dp_aux_fini(struct intel_dp *intel_dp) |
1183 | { | |
1184 | drm_dp_aux_unregister(&intel_dp->aux); | |
1185 | kfree(intel_dp->aux.name); | |
1186 | } | |
1187 | ||
1188 | static int | |
9d1a1031 JN |
1189 | intel_dp_aux_init(struct intel_dp *intel_dp, struct intel_connector *connector) |
1190 | { | |
33ad6626 JN |
1191 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
1192 | enum port port = intel_dig_port->port; | |
ab2c0672 DA |
1193 | int ret; |
1194 | ||
330e20ec | 1195 | intel_aux_reg_init(intel_dp); |
8316f337 | 1196 | |
a121f4e5 VS |
1197 | intel_dp->aux.name = kasprintf(GFP_KERNEL, "DPDDC-%c", port_name(port)); |
1198 | if (!intel_dp->aux.name) | |
1199 | return -ENOMEM; | |
1200 | ||
4d32c0d8 | 1201 | intel_dp->aux.dev = connector->base.kdev; |
9d1a1031 | 1202 | intel_dp->aux.transfer = intel_dp_aux_transfer; |
8316f337 | 1203 | |
a121f4e5 VS |
1204 | DRM_DEBUG_KMS("registering %s bus for %s\n", |
1205 | intel_dp->aux.name, | |
0b99836f | 1206 | connector->base.kdev->kobj.name); |
8316f337 | 1207 | |
4f71d0cb | 1208 | ret = drm_dp_aux_register(&intel_dp->aux); |
0b99836f | 1209 | if (ret < 0) { |
4f71d0cb | 1210 | DRM_ERROR("drm_dp_aux_register() for %s failed (%d)\n", |
a121f4e5 VS |
1211 | intel_dp->aux.name, ret); |
1212 | kfree(intel_dp->aux.name); | |
1213 | return ret; | |
ab2c0672 | 1214 | } |
8a5e6aeb | 1215 | |
a121f4e5 | 1216 | return 0; |
a4fc5ed6 KP |
1217 | } |
1218 | ||
80f65de3 ID |
1219 | static void |
1220 | intel_dp_connector_unregister(struct intel_connector *intel_connector) | |
1221 | { | |
1222 | struct intel_dp *intel_dp = intel_attached_dp(&intel_connector->base); | |
1223 | ||
4d32c0d8 | 1224 | intel_dp_aux_fini(intel_dp); |
80f65de3 ID |
1225 | intel_connector_unregister(intel_connector); |
1226 | } | |
1227 | ||
fc0f8e25 | 1228 | static int |
12f6a2e2 | 1229 | intel_dp_sink_rates(struct intel_dp *intel_dp, const int **sink_rates) |
fc0f8e25 | 1230 | { |
94ca719e VS |
1231 | if (intel_dp->num_sink_rates) { |
1232 | *sink_rates = intel_dp->sink_rates; | |
1233 | return intel_dp->num_sink_rates; | |
fc0f8e25 | 1234 | } |
12f6a2e2 VS |
1235 | |
1236 | *sink_rates = default_rates; | |
1237 | ||
1238 | return (intel_dp_max_link_bw(intel_dp) >> 3) + 1; | |
fc0f8e25 SJ |
1239 | } |
1240 | ||
e588fa18 | 1241 | bool intel_dp_source_supports_hbr2(struct intel_dp *intel_dp) |
ed63baaf | 1242 | { |
e588fa18 ACO |
1243 | struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
1244 | struct drm_device *dev = dig_port->base.base.dev; | |
1245 | ||
ed63baaf | 1246 | /* WaDisableHBR2:skl */ |
e87a005d | 1247 | if (IS_SKL_REVID(dev, 0, SKL_REVID_B0)) |
ed63baaf TS |
1248 | return false; |
1249 | ||
1250 | if ((IS_HASWELL(dev) && !IS_HSW_ULX(dev)) || IS_BROADWELL(dev) || | |
1251 | (INTEL_INFO(dev)->gen >= 9)) | |
1252 | return true; | |
1253 | else | |
1254 | return false; | |
1255 | } | |
1256 | ||
a8f3ef61 | 1257 | static int |
e588fa18 | 1258 | intel_dp_source_rates(struct intel_dp *intel_dp, const int **source_rates) |
a8f3ef61 | 1259 | { |
e588fa18 ACO |
1260 | struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
1261 | struct drm_device *dev = dig_port->base.base.dev; | |
af7080f5 TS |
1262 | int size; |
1263 | ||
64987fc5 SJ |
1264 | if (IS_BROXTON(dev)) { |
1265 | *source_rates = bxt_rates; | |
af7080f5 | 1266 | size = ARRAY_SIZE(bxt_rates); |
ef11bdb3 | 1267 | } else if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) { |
637a9c63 | 1268 | *source_rates = skl_rates; |
af7080f5 TS |
1269 | size = ARRAY_SIZE(skl_rates); |
1270 | } else { | |
1271 | *source_rates = default_rates; | |
1272 | size = ARRAY_SIZE(default_rates); | |
a8f3ef61 | 1273 | } |
636280ba | 1274 | |
ed63baaf | 1275 | /* This depends on the fact that 5.4 is last value in the array */ |
e588fa18 | 1276 | if (!intel_dp_source_supports_hbr2(intel_dp)) |
af7080f5 | 1277 | size--; |
636280ba | 1278 | |
af7080f5 | 1279 | return size; |
a8f3ef61 SJ |
1280 | } |
1281 | ||
c6bb3538 DV |
1282 | static void |
1283 | intel_dp_set_clock(struct intel_encoder *encoder, | |
840b32b7 | 1284 | struct intel_crtc_state *pipe_config) |
c6bb3538 DV |
1285 | { |
1286 | struct drm_device *dev = encoder->base.dev; | |
9dd4ffdf CML |
1287 | const struct dp_link_dpll *divisor = NULL; |
1288 | int i, count = 0; | |
c6bb3538 DV |
1289 | |
1290 | if (IS_G4X(dev)) { | |
9dd4ffdf CML |
1291 | divisor = gen4_dpll; |
1292 | count = ARRAY_SIZE(gen4_dpll); | |
c6bb3538 | 1293 | } else if (HAS_PCH_SPLIT(dev)) { |
9dd4ffdf CML |
1294 | divisor = pch_dpll; |
1295 | count = ARRAY_SIZE(pch_dpll); | |
ef9348c8 CML |
1296 | } else if (IS_CHERRYVIEW(dev)) { |
1297 | divisor = chv_dpll; | |
1298 | count = ARRAY_SIZE(chv_dpll); | |
c6bb3538 | 1299 | } else if (IS_VALLEYVIEW(dev)) { |
65ce4bf5 CML |
1300 | divisor = vlv_dpll; |
1301 | count = ARRAY_SIZE(vlv_dpll); | |
c6bb3538 | 1302 | } |
9dd4ffdf CML |
1303 | |
1304 | if (divisor && count) { | |
1305 | for (i = 0; i < count; i++) { | |
840b32b7 | 1306 | if (pipe_config->port_clock == divisor[i].clock) { |
9dd4ffdf CML |
1307 | pipe_config->dpll = divisor[i].dpll; |
1308 | pipe_config->clock_set = true; | |
1309 | break; | |
1310 | } | |
1311 | } | |
c6bb3538 DV |
1312 | } |
1313 | } | |
1314 | ||
2ecae76a VS |
1315 | static int intersect_rates(const int *source_rates, int source_len, |
1316 | const int *sink_rates, int sink_len, | |
94ca719e | 1317 | int *common_rates) |
a8f3ef61 SJ |
1318 | { |
1319 | int i = 0, j = 0, k = 0; | |
1320 | ||
a8f3ef61 SJ |
1321 | while (i < source_len && j < sink_len) { |
1322 | if (source_rates[i] == sink_rates[j]) { | |
e6bda3e4 VS |
1323 | if (WARN_ON(k >= DP_MAX_SUPPORTED_RATES)) |
1324 | return k; | |
94ca719e | 1325 | common_rates[k] = source_rates[i]; |
a8f3ef61 SJ |
1326 | ++k; |
1327 | ++i; | |
1328 | ++j; | |
1329 | } else if (source_rates[i] < sink_rates[j]) { | |
1330 | ++i; | |
1331 | } else { | |
1332 | ++j; | |
1333 | } | |
1334 | } | |
1335 | return k; | |
1336 | } | |
1337 | ||
94ca719e VS |
1338 | static int intel_dp_common_rates(struct intel_dp *intel_dp, |
1339 | int *common_rates) | |
2ecae76a | 1340 | { |
2ecae76a VS |
1341 | const int *source_rates, *sink_rates; |
1342 | int source_len, sink_len; | |
1343 | ||
1344 | sink_len = intel_dp_sink_rates(intel_dp, &sink_rates); | |
e588fa18 | 1345 | source_len = intel_dp_source_rates(intel_dp, &source_rates); |
2ecae76a VS |
1346 | |
1347 | return intersect_rates(source_rates, source_len, | |
1348 | sink_rates, sink_len, | |
94ca719e | 1349 | common_rates); |
2ecae76a VS |
1350 | } |
1351 | ||
0336400e VS |
1352 | static void snprintf_int_array(char *str, size_t len, |
1353 | const int *array, int nelem) | |
1354 | { | |
1355 | int i; | |
1356 | ||
1357 | str[0] = '\0'; | |
1358 | ||
1359 | for (i = 0; i < nelem; i++) { | |
b2f505be | 1360 | int r = snprintf(str, len, "%s%d", i ? ", " : "", array[i]); |
0336400e VS |
1361 | if (r >= len) |
1362 | return; | |
1363 | str += r; | |
1364 | len -= r; | |
1365 | } | |
1366 | } | |
1367 | ||
1368 | static void intel_dp_print_rates(struct intel_dp *intel_dp) | |
1369 | { | |
0336400e | 1370 | const int *source_rates, *sink_rates; |
94ca719e VS |
1371 | int source_len, sink_len, common_len; |
1372 | int common_rates[DP_MAX_SUPPORTED_RATES]; | |
0336400e VS |
1373 | char str[128]; /* FIXME: too big for stack? */ |
1374 | ||
1375 | if ((drm_debug & DRM_UT_KMS) == 0) | |
1376 | return; | |
1377 | ||
e588fa18 | 1378 | source_len = intel_dp_source_rates(intel_dp, &source_rates); |
0336400e VS |
1379 | snprintf_int_array(str, sizeof(str), source_rates, source_len); |
1380 | DRM_DEBUG_KMS("source rates: %s\n", str); | |
1381 | ||
1382 | sink_len = intel_dp_sink_rates(intel_dp, &sink_rates); | |
1383 | snprintf_int_array(str, sizeof(str), sink_rates, sink_len); | |
1384 | DRM_DEBUG_KMS("sink rates: %s\n", str); | |
1385 | ||
94ca719e VS |
1386 | common_len = intel_dp_common_rates(intel_dp, common_rates); |
1387 | snprintf_int_array(str, sizeof(str), common_rates, common_len); | |
1388 | DRM_DEBUG_KMS("common rates: %s\n", str); | |
0336400e VS |
1389 | } |
1390 | ||
f4896f15 | 1391 | static int rate_to_index(int find, const int *rates) |
a8f3ef61 SJ |
1392 | { |
1393 | int i = 0; | |
1394 | ||
1395 | for (i = 0; i < DP_MAX_SUPPORTED_RATES; ++i) | |
1396 | if (find == rates[i]) | |
1397 | break; | |
1398 | ||
1399 | return i; | |
1400 | } | |
1401 | ||
50fec21a VS |
1402 | int |
1403 | intel_dp_max_link_rate(struct intel_dp *intel_dp) | |
1404 | { | |
1405 | int rates[DP_MAX_SUPPORTED_RATES] = {}; | |
1406 | int len; | |
1407 | ||
94ca719e | 1408 | len = intel_dp_common_rates(intel_dp, rates); |
50fec21a VS |
1409 | if (WARN_ON(len <= 0)) |
1410 | return 162000; | |
1411 | ||
1412 | return rates[rate_to_index(0, rates) - 1]; | |
1413 | } | |
1414 | ||
ed4e9c1d VS |
1415 | int intel_dp_rate_select(struct intel_dp *intel_dp, int rate) |
1416 | { | |
94ca719e | 1417 | return rate_to_index(rate, intel_dp->sink_rates); |
ed4e9c1d VS |
1418 | } |
1419 | ||
94223d04 ACO |
1420 | void intel_dp_compute_rate(struct intel_dp *intel_dp, int port_clock, |
1421 | uint8_t *link_bw, uint8_t *rate_select) | |
04a60f9f VS |
1422 | { |
1423 | if (intel_dp->num_sink_rates) { | |
1424 | *link_bw = 0; | |
1425 | *rate_select = | |
1426 | intel_dp_rate_select(intel_dp, port_clock); | |
1427 | } else { | |
1428 | *link_bw = drm_dp_link_rate_to_bw_code(port_clock); | |
1429 | *rate_select = 0; | |
1430 | } | |
1431 | } | |
1432 | ||
00c09d70 | 1433 | bool |
5bfe2ac0 | 1434 | intel_dp_compute_config(struct intel_encoder *encoder, |
5cec258b | 1435 | struct intel_crtc_state *pipe_config) |
a4fc5ed6 | 1436 | { |
5bfe2ac0 | 1437 | struct drm_device *dev = encoder->base.dev; |
36008365 | 1438 | struct drm_i915_private *dev_priv = dev->dev_private; |
2d112de7 | 1439 | struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode; |
5bfe2ac0 | 1440 | struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); |
bc7d38a4 | 1441 | enum port port = dp_to_dig_port(intel_dp)->port; |
84556d58 | 1442 | struct intel_crtc *intel_crtc = to_intel_crtc(pipe_config->base.crtc); |
dd06f90e | 1443 | struct intel_connector *intel_connector = intel_dp->attached_connector; |
a4fc5ed6 | 1444 | int lane_count, clock; |
56071a20 | 1445 | int min_lane_count = 1; |
eeb6324d | 1446 | int max_lane_count = intel_dp_max_lane_count(intel_dp); |
06ea66b6 | 1447 | /* Conveniently, the link BW constants become indices with a shift...*/ |
56071a20 | 1448 | int min_clock = 0; |
a8f3ef61 | 1449 | int max_clock; |
083f9560 | 1450 | int bpp, mode_rate; |
ff9a6750 | 1451 | int link_avail, link_clock; |
94ca719e VS |
1452 | int common_rates[DP_MAX_SUPPORTED_RATES] = {}; |
1453 | int common_len; | |
04a60f9f | 1454 | uint8_t link_bw, rate_select; |
a8f3ef61 | 1455 | |
94ca719e | 1456 | common_len = intel_dp_common_rates(intel_dp, common_rates); |
a8f3ef61 SJ |
1457 | |
1458 | /* No common link rates between source and sink */ | |
94ca719e | 1459 | WARN_ON(common_len <= 0); |
a8f3ef61 | 1460 | |
94ca719e | 1461 | max_clock = common_len - 1; |
a4fc5ed6 | 1462 | |
bc7d38a4 | 1463 | if (HAS_PCH_SPLIT(dev) && !HAS_DDI(dev) && port != PORT_A) |
5bfe2ac0 DV |
1464 | pipe_config->has_pch_encoder = true; |
1465 | ||
03afc4a2 | 1466 | pipe_config->has_dp_encoder = true; |
f769cd24 | 1467 | pipe_config->has_drrs = false; |
9fcb1704 | 1468 | pipe_config->has_audio = intel_dp->has_audio && port != PORT_A; |
a4fc5ed6 | 1469 | |
dd06f90e JN |
1470 | if (is_edp(intel_dp) && intel_connector->panel.fixed_mode) { |
1471 | intel_fixed_panel_mode(intel_connector->panel.fixed_mode, | |
1472 | adjusted_mode); | |
a1b2278e CK |
1473 | |
1474 | if (INTEL_INFO(dev)->gen >= 9) { | |
1475 | int ret; | |
e435d6e5 | 1476 | ret = skl_update_scaler_crtc(pipe_config); |
a1b2278e CK |
1477 | if (ret) |
1478 | return ret; | |
1479 | } | |
1480 | ||
b5667627 | 1481 | if (HAS_GMCH_DISPLAY(dev)) |
2dd24552 JB |
1482 | intel_gmch_panel_fitting(intel_crtc, pipe_config, |
1483 | intel_connector->panel.fitting_mode); | |
1484 | else | |
b074cec8 JB |
1485 | intel_pch_panel_fitting(intel_crtc, pipe_config, |
1486 | intel_connector->panel.fitting_mode); | |
0d3a1bee ZY |
1487 | } |
1488 | ||
cb1793ce | 1489 | if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK) |
0af78a2b DV |
1490 | return false; |
1491 | ||
083f9560 | 1492 | DRM_DEBUG_KMS("DP link computation with max lane count %i " |
a8f3ef61 | 1493 | "max bw %d pixel clock %iKHz\n", |
94ca719e | 1494 | max_lane_count, common_rates[max_clock], |
241bfc38 | 1495 | adjusted_mode->crtc_clock); |
083f9560 | 1496 | |
36008365 DV |
1497 | /* Walk through all bpp values. Luckily they're all nicely spaced with 2 |
1498 | * bpc in between. */ | |
3e7ca985 | 1499 | bpp = pipe_config->pipe_bpp; |
56071a20 | 1500 | if (is_edp(intel_dp)) { |
22ce5628 TS |
1501 | |
1502 | /* Get bpp from vbt only for panels that dont have bpp in edid */ | |
1503 | if (intel_connector->base.display_info.bpc == 0 && | |
6aa23e65 | 1504 | (dev_priv->vbt.edp.bpp && dev_priv->vbt.edp.bpp < bpp)) { |
56071a20 | 1505 | DRM_DEBUG_KMS("clamping bpp for eDP panel to BIOS-provided %i\n", |
6aa23e65 JN |
1506 | dev_priv->vbt.edp.bpp); |
1507 | bpp = dev_priv->vbt.edp.bpp; | |
56071a20 JN |
1508 | } |
1509 | ||
344c5bbc JN |
1510 | /* |
1511 | * Use the maximum clock and number of lanes the eDP panel | |
1512 | * advertizes being capable of. The panels are generally | |
1513 | * designed to support only a single clock and lane | |
1514 | * configuration, and typically these values correspond to the | |
1515 | * native resolution of the panel. | |
1516 | */ | |
1517 | min_lane_count = max_lane_count; | |
1518 | min_clock = max_clock; | |
7984211e | 1519 | } |
657445fe | 1520 | |
36008365 | 1521 | for (; bpp >= 6*3; bpp -= 2*3) { |
241bfc38 DL |
1522 | mode_rate = intel_dp_link_required(adjusted_mode->crtc_clock, |
1523 | bpp); | |
36008365 | 1524 | |
c6930992 | 1525 | for (clock = min_clock; clock <= max_clock; clock++) { |
a8f3ef61 SJ |
1526 | for (lane_count = min_lane_count; |
1527 | lane_count <= max_lane_count; | |
1528 | lane_count <<= 1) { | |
1529 | ||
94ca719e | 1530 | link_clock = common_rates[clock]; |
36008365 DV |
1531 | link_avail = intel_dp_max_data_rate(link_clock, |
1532 | lane_count); | |
1533 | ||
1534 | if (mode_rate <= link_avail) { | |
1535 | goto found; | |
1536 | } | |
1537 | } | |
1538 | } | |
1539 | } | |
c4867936 | 1540 | |
36008365 | 1541 | return false; |
3685a8f3 | 1542 | |
36008365 | 1543 | found: |
55bc60db VS |
1544 | if (intel_dp->color_range_auto) { |
1545 | /* | |
1546 | * See: | |
1547 | * CEA-861-E - 5.1 Default Encoding Parameters | |
1548 | * VESA DisplayPort Ver.1.2a - 5.1.1.1 Video Colorimetry | |
1549 | */ | |
0f2a2a75 VS |
1550 | pipe_config->limited_color_range = |
1551 | bpp != 18 && drm_match_cea_mode(adjusted_mode) > 1; | |
1552 | } else { | |
1553 | pipe_config->limited_color_range = | |
1554 | intel_dp->limited_color_range; | |
55bc60db VS |
1555 | } |
1556 | ||
90a6b7b0 | 1557 | pipe_config->lane_count = lane_count; |
a8f3ef61 | 1558 | |
657445fe | 1559 | pipe_config->pipe_bpp = bpp; |
94ca719e | 1560 | pipe_config->port_clock = common_rates[clock]; |
a4fc5ed6 | 1561 | |
04a60f9f VS |
1562 | intel_dp_compute_rate(intel_dp, pipe_config->port_clock, |
1563 | &link_bw, &rate_select); | |
1564 | ||
1565 | DRM_DEBUG_KMS("DP link bw %02x rate select %02x lane count %d clock %d bpp %d\n", | |
1566 | link_bw, rate_select, pipe_config->lane_count, | |
ff9a6750 | 1567 | pipe_config->port_clock, bpp); |
36008365 DV |
1568 | DRM_DEBUG_KMS("DP link bw required %i available %i\n", |
1569 | mode_rate, link_avail); | |
a4fc5ed6 | 1570 | |
03afc4a2 | 1571 | intel_link_compute_m_n(bpp, lane_count, |
241bfc38 DL |
1572 | adjusted_mode->crtc_clock, |
1573 | pipe_config->port_clock, | |
03afc4a2 | 1574 | &pipe_config->dp_m_n); |
9d1a455b | 1575 | |
439d7ac0 | 1576 | if (intel_connector->panel.downclock_mode != NULL && |
96178eeb | 1577 | dev_priv->drrs.type == SEAMLESS_DRRS_SUPPORT) { |
f769cd24 | 1578 | pipe_config->has_drrs = true; |
439d7ac0 PB |
1579 | intel_link_compute_m_n(bpp, lane_count, |
1580 | intel_connector->panel.downclock_mode->clock, | |
1581 | pipe_config->port_clock, | |
1582 | &pipe_config->dp_m2_n2); | |
1583 | } | |
1584 | ||
a3c988ea | 1585 | if (!HAS_DDI(dev)) |
840b32b7 | 1586 | intel_dp_set_clock(encoder, pipe_config); |
c6bb3538 | 1587 | |
03afc4a2 | 1588 | return true; |
a4fc5ed6 KP |
1589 | } |
1590 | ||
901c2daf VS |
1591 | void intel_dp_set_link_params(struct intel_dp *intel_dp, |
1592 | const struct intel_crtc_state *pipe_config) | |
1593 | { | |
1594 | intel_dp->link_rate = pipe_config->port_clock; | |
1595 | intel_dp->lane_count = pipe_config->lane_count; | |
1596 | } | |
1597 | ||
8ac33ed3 | 1598 | static void intel_dp_prepare(struct intel_encoder *encoder) |
a4fc5ed6 | 1599 | { |
b934223d | 1600 | struct drm_device *dev = encoder->base.dev; |
417e822d | 1601 | struct drm_i915_private *dev_priv = dev->dev_private; |
b934223d | 1602 | struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); |
bc7d38a4 | 1603 | enum port port = dp_to_dig_port(intel_dp)->port; |
b934223d | 1604 | struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); |
7c5f93b0 | 1605 | const struct drm_display_mode *adjusted_mode = &crtc->config->base.adjusted_mode; |
a4fc5ed6 | 1606 | |
901c2daf VS |
1607 | intel_dp_set_link_params(intel_dp, crtc->config); |
1608 | ||
417e822d | 1609 | /* |
1a2eb460 | 1610 | * There are four kinds of DP registers: |
417e822d KP |
1611 | * |
1612 | * IBX PCH | |
1a2eb460 KP |
1613 | * SNB CPU |
1614 | * IVB CPU | |
417e822d KP |
1615 | * CPT PCH |
1616 | * | |
1617 | * IBX PCH and CPU are the same for almost everything, | |
1618 | * except that the CPU DP PLL is configured in this | |
1619 | * register | |
1620 | * | |
1621 | * CPT PCH is quite different, having many bits moved | |
1622 | * to the TRANS_DP_CTL register instead. That | |
1623 | * configuration happens (oddly) in ironlake_pch_enable | |
1624 | */ | |
9c9e7927 | 1625 | |
417e822d KP |
1626 | /* Preserve the BIOS-computed detected bit. This is |
1627 | * supposed to be read-only. | |
1628 | */ | |
1629 | intel_dp->DP = I915_READ(intel_dp->output_reg) & DP_DETECTED; | |
a4fc5ed6 | 1630 | |
417e822d | 1631 | /* Handle DP bits in common between all three register formats */ |
417e822d | 1632 | intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0; |
90a6b7b0 | 1633 | intel_dp->DP |= DP_PORT_WIDTH(crtc->config->lane_count); |
a4fc5ed6 | 1634 | |
417e822d | 1635 | /* Split out the IBX/CPU vs CPT settings */ |
32f9d658 | 1636 | |
39e5fa88 | 1637 | if (IS_GEN7(dev) && port == PORT_A) { |
1a2eb460 KP |
1638 | if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) |
1639 | intel_dp->DP |= DP_SYNC_HS_HIGH; | |
1640 | if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) | |
1641 | intel_dp->DP |= DP_SYNC_VS_HIGH; | |
1642 | intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT; | |
1643 | ||
6aba5b6c | 1644 | if (drm_dp_enhanced_frame_cap(intel_dp->dpcd)) |
1a2eb460 KP |
1645 | intel_dp->DP |= DP_ENHANCED_FRAMING; |
1646 | ||
7c62a164 | 1647 | intel_dp->DP |= crtc->pipe << 29; |
39e5fa88 | 1648 | } else if (HAS_PCH_CPT(dev) && port != PORT_A) { |
e3ef4479 VS |
1649 | u32 trans_dp; |
1650 | ||
39e5fa88 | 1651 | intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT; |
e3ef4479 VS |
1652 | |
1653 | trans_dp = I915_READ(TRANS_DP_CTL(crtc->pipe)); | |
1654 | if (drm_dp_enhanced_frame_cap(intel_dp->dpcd)) | |
1655 | trans_dp |= TRANS_DP_ENH_FRAMING; | |
1656 | else | |
1657 | trans_dp &= ~TRANS_DP_ENH_FRAMING; | |
1658 | I915_WRITE(TRANS_DP_CTL(crtc->pipe), trans_dp); | |
39e5fa88 | 1659 | } else { |
0f2a2a75 | 1660 | if (!HAS_PCH_SPLIT(dev) && !IS_VALLEYVIEW(dev) && |
666a4537 | 1661 | !IS_CHERRYVIEW(dev) && crtc->config->limited_color_range) |
0f2a2a75 | 1662 | intel_dp->DP |= DP_COLOR_RANGE_16_235; |
417e822d KP |
1663 | |
1664 | if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) | |
1665 | intel_dp->DP |= DP_SYNC_HS_HIGH; | |
1666 | if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) | |
1667 | intel_dp->DP |= DP_SYNC_VS_HIGH; | |
1668 | intel_dp->DP |= DP_LINK_TRAIN_OFF; | |
1669 | ||
6aba5b6c | 1670 | if (drm_dp_enhanced_frame_cap(intel_dp->dpcd)) |
417e822d KP |
1671 | intel_dp->DP |= DP_ENHANCED_FRAMING; |
1672 | ||
39e5fa88 | 1673 | if (IS_CHERRYVIEW(dev)) |
44f37d1f | 1674 | intel_dp->DP |= DP_PIPE_SELECT_CHV(crtc->pipe); |
39e5fa88 VS |
1675 | else if (crtc->pipe == PIPE_B) |
1676 | intel_dp->DP |= DP_PIPEB_SELECT; | |
32f9d658 | 1677 | } |
a4fc5ed6 KP |
1678 | } |
1679 | ||
ffd6749d PZ |
1680 | #define IDLE_ON_MASK (PP_ON | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK) |
1681 | #define IDLE_ON_VALUE (PP_ON | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_ON_IDLE) | |
99ea7127 | 1682 | |
1a5ef5b7 PZ |
1683 | #define IDLE_OFF_MASK (PP_ON | PP_SEQUENCE_MASK | 0 | 0) |
1684 | #define IDLE_OFF_VALUE (0 | PP_SEQUENCE_NONE | 0 | 0) | |
99ea7127 | 1685 | |
ffd6749d PZ |
1686 | #define IDLE_CYCLE_MASK (PP_ON | PP_SEQUENCE_MASK | PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK) |
1687 | #define IDLE_CYCLE_VALUE (0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_OFF_IDLE) | |
99ea7127 | 1688 | |
4be73780 | 1689 | static void wait_panel_status(struct intel_dp *intel_dp, |
99ea7127 KP |
1690 | u32 mask, |
1691 | u32 value) | |
bd943159 | 1692 | { |
30add22d | 1693 | struct drm_device *dev = intel_dp_to_dev(intel_dp); |
99ea7127 | 1694 | struct drm_i915_private *dev_priv = dev->dev_private; |
f0f59a00 | 1695 | i915_reg_t pp_stat_reg, pp_ctrl_reg; |
453c5420 | 1696 | |
e39b999a VS |
1697 | lockdep_assert_held(&dev_priv->pps_mutex); |
1698 | ||
bf13e81b JN |
1699 | pp_stat_reg = _pp_stat_reg(intel_dp); |
1700 | pp_ctrl_reg = _pp_ctrl_reg(intel_dp); | |
32ce697c | 1701 | |
99ea7127 | 1702 | DRM_DEBUG_KMS("mask %08x value %08x status %08x control %08x\n", |
453c5420 JB |
1703 | mask, value, |
1704 | I915_READ(pp_stat_reg), | |
1705 | I915_READ(pp_ctrl_reg)); | |
32ce697c | 1706 | |
3f177625 TU |
1707 | if (_wait_for((I915_READ(pp_stat_reg) & mask) == value, |
1708 | 5 * USEC_PER_SEC, 10 * USEC_PER_MSEC)) | |
99ea7127 | 1709 | DRM_ERROR("Panel status timeout: status %08x control %08x\n", |
453c5420 JB |
1710 | I915_READ(pp_stat_reg), |
1711 | I915_READ(pp_ctrl_reg)); | |
54c136d4 CW |
1712 | |
1713 | DRM_DEBUG_KMS("Wait complete\n"); | |
99ea7127 | 1714 | } |
32ce697c | 1715 | |
4be73780 | 1716 | static void wait_panel_on(struct intel_dp *intel_dp) |
99ea7127 KP |
1717 | { |
1718 | DRM_DEBUG_KMS("Wait for panel power on\n"); | |
4be73780 | 1719 | wait_panel_status(intel_dp, IDLE_ON_MASK, IDLE_ON_VALUE); |
bd943159 KP |
1720 | } |
1721 | ||
4be73780 | 1722 | static void wait_panel_off(struct intel_dp *intel_dp) |
99ea7127 KP |
1723 | { |
1724 | DRM_DEBUG_KMS("Wait for panel power off time\n"); | |
4be73780 | 1725 | wait_panel_status(intel_dp, IDLE_OFF_MASK, IDLE_OFF_VALUE); |
99ea7127 KP |
1726 | } |
1727 | ||
4be73780 | 1728 | static void wait_panel_power_cycle(struct intel_dp *intel_dp) |
99ea7127 | 1729 | { |
d28d4731 AK |
1730 | ktime_t panel_power_on_time; |
1731 | s64 panel_power_off_duration; | |
1732 | ||
99ea7127 | 1733 | DRM_DEBUG_KMS("Wait for panel power cycle\n"); |
dce56b3c | 1734 | |
d28d4731 AK |
1735 | /* take the difference of currrent time and panel power off time |
1736 | * and then make panel wait for t11_t12 if needed. */ | |
1737 | panel_power_on_time = ktime_get_boottime(); | |
1738 | panel_power_off_duration = ktime_ms_delta(panel_power_on_time, intel_dp->panel_power_off_time); | |
1739 | ||
dce56b3c PZ |
1740 | /* When we disable the VDD override bit last we have to do the manual |
1741 | * wait. */ | |
d28d4731 AK |
1742 | if (panel_power_off_duration < (s64)intel_dp->panel_power_cycle_delay) |
1743 | wait_remaining_ms_from_jiffies(jiffies, | |
1744 | intel_dp->panel_power_cycle_delay - panel_power_off_duration); | |
dce56b3c | 1745 | |
4be73780 | 1746 | wait_panel_status(intel_dp, IDLE_CYCLE_MASK, IDLE_CYCLE_VALUE); |
99ea7127 KP |
1747 | } |
1748 | ||
4be73780 | 1749 | static void wait_backlight_on(struct intel_dp *intel_dp) |
dce56b3c PZ |
1750 | { |
1751 | wait_remaining_ms_from_jiffies(intel_dp->last_power_on, | |
1752 | intel_dp->backlight_on_delay); | |
1753 | } | |
1754 | ||
4be73780 | 1755 | static void edp_wait_backlight_off(struct intel_dp *intel_dp) |
dce56b3c PZ |
1756 | { |
1757 | wait_remaining_ms_from_jiffies(intel_dp->last_backlight_off, | |
1758 | intel_dp->backlight_off_delay); | |
1759 | } | |
99ea7127 | 1760 | |
832dd3c1 KP |
1761 | /* Read the current pp_control value, unlocking the register if it |
1762 | * is locked | |
1763 | */ | |
1764 | ||
453c5420 | 1765 | static u32 ironlake_get_pp_control(struct intel_dp *intel_dp) |
832dd3c1 | 1766 | { |
453c5420 JB |
1767 | struct drm_device *dev = intel_dp_to_dev(intel_dp); |
1768 | struct drm_i915_private *dev_priv = dev->dev_private; | |
1769 | u32 control; | |
832dd3c1 | 1770 | |
e39b999a VS |
1771 | lockdep_assert_held(&dev_priv->pps_mutex); |
1772 | ||
bf13e81b | 1773 | control = I915_READ(_pp_ctrl_reg(intel_dp)); |
b0a08bec VK |
1774 | if (!IS_BROXTON(dev)) { |
1775 | control &= ~PANEL_UNLOCK_MASK; | |
1776 | control |= PANEL_UNLOCK_REGS; | |
1777 | } | |
832dd3c1 | 1778 | return control; |
bd943159 KP |
1779 | } |
1780 | ||
951468f3 VS |
1781 | /* |
1782 | * Must be paired with edp_panel_vdd_off(). | |
1783 | * Must hold pps_mutex around the whole on/off sequence. | |
1784 | * Can be nested with intel_edp_panel_vdd_{on,off}() calls. | |
1785 | */ | |
1e0560e0 | 1786 | static bool edp_panel_vdd_on(struct intel_dp *intel_dp) |
5d613501 | 1787 | { |
30add22d | 1788 | struct drm_device *dev = intel_dp_to_dev(intel_dp); |
4e6e1a54 ID |
1789 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
1790 | struct intel_encoder *intel_encoder = &intel_dig_port->base; | |
5d613501 | 1791 | struct drm_i915_private *dev_priv = dev->dev_private; |
4e6e1a54 | 1792 | enum intel_display_power_domain power_domain; |
5d613501 | 1793 | u32 pp; |
f0f59a00 | 1794 | i915_reg_t pp_stat_reg, pp_ctrl_reg; |
adddaaf4 | 1795 | bool need_to_disable = !intel_dp->want_panel_vdd; |
5d613501 | 1796 | |
e39b999a VS |
1797 | lockdep_assert_held(&dev_priv->pps_mutex); |
1798 | ||
97af61f5 | 1799 | if (!is_edp(intel_dp)) |
adddaaf4 | 1800 | return false; |
bd943159 | 1801 | |
2c623c11 | 1802 | cancel_delayed_work(&intel_dp->panel_vdd_work); |
bd943159 | 1803 | intel_dp->want_panel_vdd = true; |
99ea7127 | 1804 | |
4be73780 | 1805 | if (edp_have_panel_vdd(intel_dp)) |
adddaaf4 | 1806 | return need_to_disable; |
b0665d57 | 1807 | |
25f78f58 | 1808 | power_domain = intel_display_port_aux_power_domain(intel_encoder); |
4e6e1a54 | 1809 | intel_display_power_get(dev_priv, power_domain); |
e9cb81a2 | 1810 | |
3936fcf4 VS |
1811 | DRM_DEBUG_KMS("Turning eDP port %c VDD on\n", |
1812 | port_name(intel_dig_port->port)); | |
bd943159 | 1813 | |
4be73780 DV |
1814 | if (!edp_have_panel_power(intel_dp)) |
1815 | wait_panel_power_cycle(intel_dp); | |
99ea7127 | 1816 | |
453c5420 | 1817 | pp = ironlake_get_pp_control(intel_dp); |
5d613501 | 1818 | pp |= EDP_FORCE_VDD; |
ebf33b18 | 1819 | |
bf13e81b JN |
1820 | pp_stat_reg = _pp_stat_reg(intel_dp); |
1821 | pp_ctrl_reg = _pp_ctrl_reg(intel_dp); | |
453c5420 JB |
1822 | |
1823 | I915_WRITE(pp_ctrl_reg, pp); | |
1824 | POSTING_READ(pp_ctrl_reg); | |
1825 | DRM_DEBUG_KMS("PP_STATUS: 0x%08x PP_CONTROL: 0x%08x\n", | |
1826 | I915_READ(pp_stat_reg), I915_READ(pp_ctrl_reg)); | |
ebf33b18 KP |
1827 | /* |
1828 | * If the panel wasn't on, delay before accessing aux channel | |
1829 | */ | |
4be73780 | 1830 | if (!edp_have_panel_power(intel_dp)) { |
3936fcf4 VS |
1831 | DRM_DEBUG_KMS("eDP port %c panel power wasn't enabled\n", |
1832 | port_name(intel_dig_port->port)); | |
f01eca2e | 1833 | msleep(intel_dp->panel_power_up_delay); |
f01eca2e | 1834 | } |
adddaaf4 JN |
1835 | |
1836 | return need_to_disable; | |
1837 | } | |
1838 | ||
951468f3 VS |
1839 | /* |
1840 | * Must be paired with intel_edp_panel_vdd_off() or | |
1841 | * intel_edp_panel_off(). | |
1842 | * Nested calls to these functions are not allowed since | |
1843 | * we drop the lock. Caller must use some higher level | |
1844 | * locking to prevent nested calls from other threads. | |
1845 | */ | |
b80d6c78 | 1846 | void intel_edp_panel_vdd_on(struct intel_dp *intel_dp) |
adddaaf4 | 1847 | { |
c695b6b6 | 1848 | bool vdd; |
adddaaf4 | 1849 | |
c695b6b6 VS |
1850 | if (!is_edp(intel_dp)) |
1851 | return; | |
1852 | ||
773538e8 | 1853 | pps_lock(intel_dp); |
c695b6b6 | 1854 | vdd = edp_panel_vdd_on(intel_dp); |
773538e8 | 1855 | pps_unlock(intel_dp); |
c695b6b6 | 1856 | |
e2c719b7 | 1857 | I915_STATE_WARN(!vdd, "eDP port %c VDD already requested on\n", |
3936fcf4 | 1858 | port_name(dp_to_dig_port(intel_dp)->port)); |
5d613501 JB |
1859 | } |
1860 | ||
4be73780 | 1861 | static void edp_panel_vdd_off_sync(struct intel_dp *intel_dp) |
5d613501 | 1862 | { |
30add22d | 1863 | struct drm_device *dev = intel_dp_to_dev(intel_dp); |
5d613501 | 1864 | struct drm_i915_private *dev_priv = dev->dev_private; |
be2c9196 VS |
1865 | struct intel_digital_port *intel_dig_port = |
1866 | dp_to_dig_port(intel_dp); | |
1867 | struct intel_encoder *intel_encoder = &intel_dig_port->base; | |
1868 | enum intel_display_power_domain power_domain; | |
5d613501 | 1869 | u32 pp; |
f0f59a00 | 1870 | i915_reg_t pp_stat_reg, pp_ctrl_reg; |
5d613501 | 1871 | |
e39b999a | 1872 | lockdep_assert_held(&dev_priv->pps_mutex); |
a0e99e68 | 1873 | |
15e899a0 | 1874 | WARN_ON(intel_dp->want_panel_vdd); |
4e6e1a54 | 1875 | |
15e899a0 | 1876 | if (!edp_have_panel_vdd(intel_dp)) |
be2c9196 | 1877 | return; |
b0665d57 | 1878 | |
3936fcf4 VS |
1879 | DRM_DEBUG_KMS("Turning eDP port %c VDD off\n", |
1880 | port_name(intel_dig_port->port)); | |
bd943159 | 1881 | |
be2c9196 VS |
1882 | pp = ironlake_get_pp_control(intel_dp); |
1883 | pp &= ~EDP_FORCE_VDD; | |
453c5420 | 1884 | |
be2c9196 VS |
1885 | pp_ctrl_reg = _pp_ctrl_reg(intel_dp); |
1886 | pp_stat_reg = _pp_stat_reg(intel_dp); | |
99ea7127 | 1887 | |
be2c9196 VS |
1888 | I915_WRITE(pp_ctrl_reg, pp); |
1889 | POSTING_READ(pp_ctrl_reg); | |
90791a5c | 1890 | |
be2c9196 VS |
1891 | /* Make sure sequencer is idle before allowing subsequent activity */ |
1892 | DRM_DEBUG_KMS("PP_STATUS: 0x%08x PP_CONTROL: 0x%08x\n", | |
1893 | I915_READ(pp_stat_reg), I915_READ(pp_ctrl_reg)); | |
e9cb81a2 | 1894 | |
be2c9196 | 1895 | if ((pp & POWER_TARGET_ON) == 0) |
d28d4731 | 1896 | intel_dp->panel_power_off_time = ktime_get_boottime(); |
e9cb81a2 | 1897 | |
25f78f58 | 1898 | power_domain = intel_display_port_aux_power_domain(intel_encoder); |
be2c9196 | 1899 | intel_display_power_put(dev_priv, power_domain); |
bd943159 | 1900 | } |
5d613501 | 1901 | |
4be73780 | 1902 | static void edp_panel_vdd_work(struct work_struct *__work) |
bd943159 KP |
1903 | { |
1904 | struct intel_dp *intel_dp = container_of(to_delayed_work(__work), | |
1905 | struct intel_dp, panel_vdd_work); | |
bd943159 | 1906 | |
773538e8 | 1907 | pps_lock(intel_dp); |
15e899a0 VS |
1908 | if (!intel_dp->want_panel_vdd) |
1909 | edp_panel_vdd_off_sync(intel_dp); | |
773538e8 | 1910 | pps_unlock(intel_dp); |
bd943159 KP |
1911 | } |
1912 | ||
aba86890 ID |
1913 | static void edp_panel_vdd_schedule_off(struct intel_dp *intel_dp) |
1914 | { | |
1915 | unsigned long delay; | |
1916 | ||
1917 | /* | |
1918 | * Queue the timer to fire a long time from now (relative to the power | |
1919 | * down delay) to keep the panel power up across a sequence of | |
1920 | * operations. | |
1921 | */ | |
1922 | delay = msecs_to_jiffies(intel_dp->panel_power_cycle_delay * 5); | |
1923 | schedule_delayed_work(&intel_dp->panel_vdd_work, delay); | |
1924 | } | |
1925 | ||
951468f3 VS |
1926 | /* |
1927 | * Must be paired with edp_panel_vdd_on(). | |
1928 | * Must hold pps_mutex around the whole on/off sequence. | |
1929 | * Can be nested with intel_edp_panel_vdd_{on,off}() calls. | |
1930 | */ | |
4be73780 | 1931 | static void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync) |
bd943159 | 1932 | { |
e39b999a VS |
1933 | struct drm_i915_private *dev_priv = |
1934 | intel_dp_to_dev(intel_dp)->dev_private; | |
1935 | ||
1936 | lockdep_assert_held(&dev_priv->pps_mutex); | |
1937 | ||
97af61f5 KP |
1938 | if (!is_edp(intel_dp)) |
1939 | return; | |
5d613501 | 1940 | |
e2c719b7 | 1941 | I915_STATE_WARN(!intel_dp->want_panel_vdd, "eDP port %c VDD not forced on", |
3936fcf4 | 1942 | port_name(dp_to_dig_port(intel_dp)->port)); |
f2e8b18a | 1943 | |
bd943159 KP |
1944 | intel_dp->want_panel_vdd = false; |
1945 | ||
aba86890 | 1946 | if (sync) |
4be73780 | 1947 | edp_panel_vdd_off_sync(intel_dp); |
aba86890 ID |
1948 | else |
1949 | edp_panel_vdd_schedule_off(intel_dp); | |
5d613501 JB |
1950 | } |
1951 | ||
9f0fb5be | 1952 | static void edp_panel_on(struct intel_dp *intel_dp) |
9934c132 | 1953 | { |
30add22d | 1954 | struct drm_device *dev = intel_dp_to_dev(intel_dp); |
9934c132 | 1955 | struct drm_i915_private *dev_priv = dev->dev_private; |
99ea7127 | 1956 | u32 pp; |
f0f59a00 | 1957 | i915_reg_t pp_ctrl_reg; |
9934c132 | 1958 | |
9f0fb5be VS |
1959 | lockdep_assert_held(&dev_priv->pps_mutex); |
1960 | ||
97af61f5 | 1961 | if (!is_edp(intel_dp)) |
bd943159 | 1962 | return; |
99ea7127 | 1963 | |
3936fcf4 VS |
1964 | DRM_DEBUG_KMS("Turn eDP port %c panel power on\n", |
1965 | port_name(dp_to_dig_port(intel_dp)->port)); | |
e39b999a | 1966 | |
e7a89ace VS |
1967 | if (WARN(edp_have_panel_power(intel_dp), |
1968 | "eDP port %c panel power already on\n", | |
1969 | port_name(dp_to_dig_port(intel_dp)->port))) | |
9f0fb5be | 1970 | return; |
9934c132 | 1971 | |
4be73780 | 1972 | wait_panel_power_cycle(intel_dp); |
37c6c9b0 | 1973 | |
bf13e81b | 1974 | pp_ctrl_reg = _pp_ctrl_reg(intel_dp); |
453c5420 | 1975 | pp = ironlake_get_pp_control(intel_dp); |
05ce1a49 KP |
1976 | if (IS_GEN5(dev)) { |
1977 | /* ILK workaround: disable reset around power sequence */ | |
1978 | pp &= ~PANEL_POWER_RESET; | |
bf13e81b JN |
1979 | I915_WRITE(pp_ctrl_reg, pp); |
1980 | POSTING_READ(pp_ctrl_reg); | |
05ce1a49 | 1981 | } |
37c6c9b0 | 1982 | |
1c0ae80a | 1983 | pp |= POWER_TARGET_ON; |
99ea7127 KP |
1984 | if (!IS_GEN5(dev)) |
1985 | pp |= PANEL_POWER_RESET; | |
1986 | ||
453c5420 JB |
1987 | I915_WRITE(pp_ctrl_reg, pp); |
1988 | POSTING_READ(pp_ctrl_reg); | |
9934c132 | 1989 | |
4be73780 | 1990 | wait_panel_on(intel_dp); |
dce56b3c | 1991 | intel_dp->last_power_on = jiffies; |
9934c132 | 1992 | |
05ce1a49 KP |
1993 | if (IS_GEN5(dev)) { |
1994 | pp |= PANEL_POWER_RESET; /* restore panel reset bit */ | |
bf13e81b JN |
1995 | I915_WRITE(pp_ctrl_reg, pp); |
1996 | POSTING_READ(pp_ctrl_reg); | |
05ce1a49 | 1997 | } |
9f0fb5be | 1998 | } |
e39b999a | 1999 | |
9f0fb5be VS |
2000 | void intel_edp_panel_on(struct intel_dp *intel_dp) |
2001 | { | |
2002 | if (!is_edp(intel_dp)) | |
2003 | return; | |
2004 | ||
2005 | pps_lock(intel_dp); | |
2006 | edp_panel_on(intel_dp); | |
773538e8 | 2007 | pps_unlock(intel_dp); |
9934c132 JB |
2008 | } |
2009 | ||
9f0fb5be VS |
2010 | |
2011 | static void edp_panel_off(struct intel_dp *intel_dp) | |
9934c132 | 2012 | { |
4e6e1a54 ID |
2013 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
2014 | struct intel_encoder *intel_encoder = &intel_dig_port->base; | |
30add22d | 2015 | struct drm_device *dev = intel_dp_to_dev(intel_dp); |
9934c132 | 2016 | struct drm_i915_private *dev_priv = dev->dev_private; |
4e6e1a54 | 2017 | enum intel_display_power_domain power_domain; |
99ea7127 | 2018 | u32 pp; |
f0f59a00 | 2019 | i915_reg_t pp_ctrl_reg; |
9934c132 | 2020 | |
9f0fb5be VS |
2021 | lockdep_assert_held(&dev_priv->pps_mutex); |
2022 | ||
97af61f5 KP |
2023 | if (!is_edp(intel_dp)) |
2024 | return; | |
37c6c9b0 | 2025 | |
3936fcf4 VS |
2026 | DRM_DEBUG_KMS("Turn eDP port %c panel power off\n", |
2027 | port_name(dp_to_dig_port(intel_dp)->port)); | |
37c6c9b0 | 2028 | |
3936fcf4 VS |
2029 | WARN(!intel_dp->want_panel_vdd, "Need eDP port %c VDD to turn off panel\n", |
2030 | port_name(dp_to_dig_port(intel_dp)->port)); | |
24f3e092 | 2031 | |
453c5420 | 2032 | pp = ironlake_get_pp_control(intel_dp); |
35a38556 DV |
2033 | /* We need to switch off panel power _and_ force vdd, for otherwise some |
2034 | * panels get very unhappy and cease to work. */ | |
b3064154 PJ |
2035 | pp &= ~(POWER_TARGET_ON | PANEL_POWER_RESET | EDP_FORCE_VDD | |
2036 | EDP_BLC_ENABLE); | |
453c5420 | 2037 | |
bf13e81b | 2038 | pp_ctrl_reg = _pp_ctrl_reg(intel_dp); |
453c5420 | 2039 | |
849e39f5 PZ |
2040 | intel_dp->want_panel_vdd = false; |
2041 | ||
453c5420 JB |
2042 | I915_WRITE(pp_ctrl_reg, pp); |
2043 | POSTING_READ(pp_ctrl_reg); | |
9934c132 | 2044 | |
d28d4731 | 2045 | intel_dp->panel_power_off_time = ktime_get_boottime(); |
4be73780 | 2046 | wait_panel_off(intel_dp); |
849e39f5 PZ |
2047 | |
2048 | /* We got a reference when we enabled the VDD. */ | |
25f78f58 | 2049 | power_domain = intel_display_port_aux_power_domain(intel_encoder); |
4e6e1a54 | 2050 | intel_display_power_put(dev_priv, power_domain); |
9f0fb5be | 2051 | } |
e39b999a | 2052 | |
9f0fb5be VS |
2053 | void intel_edp_panel_off(struct intel_dp *intel_dp) |
2054 | { | |
2055 | if (!is_edp(intel_dp)) | |
2056 | return; | |
e39b999a | 2057 | |
9f0fb5be VS |
2058 | pps_lock(intel_dp); |
2059 | edp_panel_off(intel_dp); | |
773538e8 | 2060 | pps_unlock(intel_dp); |
9934c132 JB |
2061 | } |
2062 | ||
1250d107 JN |
2063 | /* Enable backlight in the panel power control. */ |
2064 | static void _intel_edp_backlight_on(struct intel_dp *intel_dp) | |
32f9d658 | 2065 | { |
da63a9f2 PZ |
2066 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
2067 | struct drm_device *dev = intel_dig_port->base.base.dev; | |
32f9d658 ZW |
2068 | struct drm_i915_private *dev_priv = dev->dev_private; |
2069 | u32 pp; | |
f0f59a00 | 2070 | i915_reg_t pp_ctrl_reg; |
32f9d658 | 2071 | |
01cb9ea6 JB |
2072 | /* |
2073 | * If we enable the backlight right away following a panel power | |
2074 | * on, we may see slight flicker as the panel syncs with the eDP | |
2075 | * link. So delay a bit to make sure the image is solid before | |
2076 | * allowing it to appear. | |
2077 | */ | |
4be73780 | 2078 | wait_backlight_on(intel_dp); |
e39b999a | 2079 | |
773538e8 | 2080 | pps_lock(intel_dp); |
e39b999a | 2081 | |
453c5420 | 2082 | pp = ironlake_get_pp_control(intel_dp); |
32f9d658 | 2083 | pp |= EDP_BLC_ENABLE; |
453c5420 | 2084 | |
bf13e81b | 2085 | pp_ctrl_reg = _pp_ctrl_reg(intel_dp); |
453c5420 JB |
2086 | |
2087 | I915_WRITE(pp_ctrl_reg, pp); | |
2088 | POSTING_READ(pp_ctrl_reg); | |
e39b999a | 2089 | |
773538e8 | 2090 | pps_unlock(intel_dp); |
32f9d658 ZW |
2091 | } |
2092 | ||
1250d107 JN |
2093 | /* Enable backlight PWM and backlight PP control. */ |
2094 | void intel_edp_backlight_on(struct intel_dp *intel_dp) | |
2095 | { | |
2096 | if (!is_edp(intel_dp)) | |
2097 | return; | |
2098 | ||
2099 | DRM_DEBUG_KMS("\n"); | |
2100 | ||
2101 | intel_panel_enable_backlight(intel_dp->attached_connector); | |
2102 | _intel_edp_backlight_on(intel_dp); | |
2103 | } | |
2104 | ||
2105 | /* Disable backlight in the panel power control. */ | |
2106 | static void _intel_edp_backlight_off(struct intel_dp *intel_dp) | |
32f9d658 | 2107 | { |
30add22d | 2108 | struct drm_device *dev = intel_dp_to_dev(intel_dp); |
32f9d658 ZW |
2109 | struct drm_i915_private *dev_priv = dev->dev_private; |
2110 | u32 pp; | |
f0f59a00 | 2111 | i915_reg_t pp_ctrl_reg; |
32f9d658 | 2112 | |
f01eca2e KP |
2113 | if (!is_edp(intel_dp)) |
2114 | return; | |
2115 | ||
773538e8 | 2116 | pps_lock(intel_dp); |
e39b999a | 2117 | |
453c5420 | 2118 | pp = ironlake_get_pp_control(intel_dp); |
32f9d658 | 2119 | pp &= ~EDP_BLC_ENABLE; |
453c5420 | 2120 | |
bf13e81b | 2121 | pp_ctrl_reg = _pp_ctrl_reg(intel_dp); |
453c5420 JB |
2122 | |
2123 | I915_WRITE(pp_ctrl_reg, pp); | |
2124 | POSTING_READ(pp_ctrl_reg); | |
f7d2323c | 2125 | |
773538e8 | 2126 | pps_unlock(intel_dp); |
e39b999a VS |
2127 | |
2128 | intel_dp->last_backlight_off = jiffies; | |
f7d2323c | 2129 | edp_wait_backlight_off(intel_dp); |
1250d107 | 2130 | } |
f7d2323c | 2131 | |
1250d107 JN |
2132 | /* Disable backlight PP control and backlight PWM. */ |
2133 | void intel_edp_backlight_off(struct intel_dp *intel_dp) | |
2134 | { | |
2135 | if (!is_edp(intel_dp)) | |
2136 | return; | |
2137 | ||
2138 | DRM_DEBUG_KMS("\n"); | |
f7d2323c | 2139 | |
1250d107 | 2140 | _intel_edp_backlight_off(intel_dp); |
f7d2323c | 2141 | intel_panel_disable_backlight(intel_dp->attached_connector); |
32f9d658 | 2142 | } |
a4fc5ed6 | 2143 | |
73580fb7 JN |
2144 | /* |
2145 | * Hook for controlling the panel power control backlight through the bl_power | |
2146 | * sysfs attribute. Take care to handle multiple calls. | |
2147 | */ | |
2148 | static void intel_edp_backlight_power(struct intel_connector *connector, | |
2149 | bool enable) | |
2150 | { | |
2151 | struct intel_dp *intel_dp = intel_attached_dp(&connector->base); | |
e39b999a VS |
2152 | bool is_enabled; |
2153 | ||
773538e8 | 2154 | pps_lock(intel_dp); |
e39b999a | 2155 | is_enabled = ironlake_get_pp_control(intel_dp) & EDP_BLC_ENABLE; |
773538e8 | 2156 | pps_unlock(intel_dp); |
73580fb7 JN |
2157 | |
2158 | if (is_enabled == enable) | |
2159 | return; | |
2160 | ||
23ba9373 JN |
2161 | DRM_DEBUG_KMS("panel power control backlight %s\n", |
2162 | enable ? "enable" : "disable"); | |
73580fb7 JN |
2163 | |
2164 | if (enable) | |
2165 | _intel_edp_backlight_on(intel_dp); | |
2166 | else | |
2167 | _intel_edp_backlight_off(intel_dp); | |
2168 | } | |
2169 | ||
64e1077a VS |
2170 | static void assert_dp_port(struct intel_dp *intel_dp, bool state) |
2171 | { | |
2172 | struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); | |
2173 | struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev); | |
2174 | bool cur_state = I915_READ(intel_dp->output_reg) & DP_PORT_EN; | |
2175 | ||
2176 | I915_STATE_WARN(cur_state != state, | |
2177 | "DP port %c state assertion failure (expected %s, current %s)\n", | |
2178 | port_name(dig_port->port), | |
87ad3212 | 2179 | onoff(state), onoff(cur_state)); |
64e1077a VS |
2180 | } |
2181 | #define assert_dp_port_disabled(d) assert_dp_port((d), false) | |
2182 | ||
2183 | static void assert_edp_pll(struct drm_i915_private *dev_priv, bool state) | |
2184 | { | |
2185 | bool cur_state = I915_READ(DP_A) & DP_PLL_ENABLE; | |
2186 | ||
2187 | I915_STATE_WARN(cur_state != state, | |
2188 | "eDP PLL state assertion failure (expected %s, current %s)\n", | |
87ad3212 | 2189 | onoff(state), onoff(cur_state)); |
64e1077a VS |
2190 | } |
2191 | #define assert_edp_pll_enabled(d) assert_edp_pll((d), true) | |
2192 | #define assert_edp_pll_disabled(d) assert_edp_pll((d), false) | |
2193 | ||
2bd2ad64 | 2194 | static void ironlake_edp_pll_on(struct intel_dp *intel_dp) |
d240f20f | 2195 | { |
da63a9f2 | 2196 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
64e1077a VS |
2197 | struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc); |
2198 | struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); | |
d240f20f | 2199 | |
64e1077a VS |
2200 | assert_pipe_disabled(dev_priv, crtc->pipe); |
2201 | assert_dp_port_disabled(intel_dp); | |
2202 | assert_edp_pll_disabled(dev_priv); | |
2bd2ad64 | 2203 | |
abfce949 VS |
2204 | DRM_DEBUG_KMS("enabling eDP PLL for clock %d\n", |
2205 | crtc->config->port_clock); | |
2206 | ||
2207 | intel_dp->DP &= ~DP_PLL_FREQ_MASK; | |
2208 | ||
2209 | if (crtc->config->port_clock == 162000) | |
2210 | intel_dp->DP |= DP_PLL_FREQ_162MHZ; | |
2211 | else | |
2212 | intel_dp->DP |= DP_PLL_FREQ_270MHZ; | |
2213 | ||
2214 | I915_WRITE(DP_A, intel_dp->DP); | |
2215 | POSTING_READ(DP_A); | |
2216 | udelay(500); | |
2217 | ||
0767935e | 2218 | intel_dp->DP |= DP_PLL_ENABLE; |
6fec7662 | 2219 | |
0767935e | 2220 | I915_WRITE(DP_A, intel_dp->DP); |
298b0b39 JB |
2221 | POSTING_READ(DP_A); |
2222 | udelay(200); | |
d240f20f JB |
2223 | } |
2224 | ||
2bd2ad64 | 2225 | static void ironlake_edp_pll_off(struct intel_dp *intel_dp) |
d240f20f | 2226 | { |
da63a9f2 | 2227 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
64e1077a VS |
2228 | struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc); |
2229 | struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); | |
d240f20f | 2230 | |
64e1077a VS |
2231 | assert_pipe_disabled(dev_priv, crtc->pipe); |
2232 | assert_dp_port_disabled(intel_dp); | |
2233 | assert_edp_pll_enabled(dev_priv); | |
2bd2ad64 | 2234 | |
abfce949 VS |
2235 | DRM_DEBUG_KMS("disabling eDP PLL\n"); |
2236 | ||
6fec7662 | 2237 | intel_dp->DP &= ~DP_PLL_ENABLE; |
0767935e | 2238 | |
6fec7662 | 2239 | I915_WRITE(DP_A, intel_dp->DP); |
1af5fa1b | 2240 | POSTING_READ(DP_A); |
d240f20f JB |
2241 | udelay(200); |
2242 | } | |
2243 | ||
c7ad3810 | 2244 | /* If the sink supports it, try to set the power state appropriately */ |
c19b0669 | 2245 | void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode) |
c7ad3810 JB |
2246 | { |
2247 | int ret, i; | |
2248 | ||
2249 | /* Should have a valid DPCD by this point */ | |
2250 | if (intel_dp->dpcd[DP_DPCD_REV] < 0x11) | |
2251 | return; | |
2252 | ||
2253 | if (mode != DRM_MODE_DPMS_ON) { | |
9d1a1031 JN |
2254 | ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, |
2255 | DP_SET_POWER_D3); | |
c7ad3810 JB |
2256 | } else { |
2257 | /* | |
2258 | * When turning on, we need to retry for 1ms to give the sink | |
2259 | * time to wake up. | |
2260 | */ | |
2261 | for (i = 0; i < 3; i++) { | |
9d1a1031 JN |
2262 | ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, |
2263 | DP_SET_POWER_D0); | |
c7ad3810 JB |
2264 | if (ret == 1) |
2265 | break; | |
2266 | msleep(1); | |
2267 | } | |
2268 | } | |
f9cac721 JN |
2269 | |
2270 | if (ret != 1) | |
2271 | DRM_DEBUG_KMS("failed to %s sink power state\n", | |
2272 | mode == DRM_MODE_DPMS_ON ? "enable" : "disable"); | |
c7ad3810 JB |
2273 | } |
2274 | ||
19d8fe15 DV |
2275 | static bool intel_dp_get_hw_state(struct intel_encoder *encoder, |
2276 | enum pipe *pipe) | |
d240f20f | 2277 | { |
19d8fe15 | 2278 | struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); |
bc7d38a4 | 2279 | enum port port = dp_to_dig_port(intel_dp)->port; |
19d8fe15 DV |
2280 | struct drm_device *dev = encoder->base.dev; |
2281 | struct drm_i915_private *dev_priv = dev->dev_private; | |
6d129bea ID |
2282 | enum intel_display_power_domain power_domain; |
2283 | u32 tmp; | |
6fa9a5ec | 2284 | bool ret; |
6d129bea ID |
2285 | |
2286 | power_domain = intel_display_port_power_domain(encoder); | |
6fa9a5ec | 2287 | if (!intel_display_power_get_if_enabled(dev_priv, power_domain)) |
6d129bea ID |
2288 | return false; |
2289 | ||
6fa9a5ec ID |
2290 | ret = false; |
2291 | ||
6d129bea | 2292 | tmp = I915_READ(intel_dp->output_reg); |
19d8fe15 DV |
2293 | |
2294 | if (!(tmp & DP_PORT_EN)) | |
6fa9a5ec | 2295 | goto out; |
19d8fe15 | 2296 | |
39e5fa88 | 2297 | if (IS_GEN7(dev) && port == PORT_A) { |
19d8fe15 | 2298 | *pipe = PORT_TO_PIPE_CPT(tmp); |
39e5fa88 | 2299 | } else if (HAS_PCH_CPT(dev) && port != PORT_A) { |
adc289d7 | 2300 | enum pipe p; |
19d8fe15 | 2301 | |
adc289d7 VS |
2302 | for_each_pipe(dev_priv, p) { |
2303 | u32 trans_dp = I915_READ(TRANS_DP_CTL(p)); | |
2304 | if (TRANS_DP_PIPE_TO_PORT(trans_dp) == port) { | |
2305 | *pipe = p; | |
6fa9a5ec ID |
2306 | ret = true; |
2307 | ||
2308 | goto out; | |
19d8fe15 DV |
2309 | } |
2310 | } | |
19d8fe15 | 2311 | |
4a0833ec | 2312 | DRM_DEBUG_KMS("No pipe for dp port 0x%x found\n", |
f0f59a00 | 2313 | i915_mmio_reg_offset(intel_dp->output_reg)); |
39e5fa88 VS |
2314 | } else if (IS_CHERRYVIEW(dev)) { |
2315 | *pipe = DP_PORT_TO_PIPE_CHV(tmp); | |
2316 | } else { | |
2317 | *pipe = PORT_TO_PIPE(tmp); | |
4a0833ec | 2318 | } |
d240f20f | 2319 | |
6fa9a5ec ID |
2320 | ret = true; |
2321 | ||
2322 | out: | |
2323 | intel_display_power_put(dev_priv, power_domain); | |
2324 | ||
2325 | return ret; | |
19d8fe15 | 2326 | } |
d240f20f | 2327 | |
045ac3b5 | 2328 | static void intel_dp_get_config(struct intel_encoder *encoder, |
5cec258b | 2329 | struct intel_crtc_state *pipe_config) |
045ac3b5 JB |
2330 | { |
2331 | struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); | |
045ac3b5 | 2332 | u32 tmp, flags = 0; |
63000ef6 XZ |
2333 | struct drm_device *dev = encoder->base.dev; |
2334 | struct drm_i915_private *dev_priv = dev->dev_private; | |
2335 | enum port port = dp_to_dig_port(intel_dp)->port; | |
2336 | struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); | |
045ac3b5 | 2337 | |
9ed109a7 | 2338 | tmp = I915_READ(intel_dp->output_reg); |
9fcb1704 JN |
2339 | |
2340 | pipe_config->has_audio = tmp & DP_AUDIO_OUTPUT_ENABLE && port != PORT_A; | |
9ed109a7 | 2341 | |
39e5fa88 | 2342 | if (HAS_PCH_CPT(dev) && port != PORT_A) { |
b81e34c2 VS |
2343 | u32 trans_dp = I915_READ(TRANS_DP_CTL(crtc->pipe)); |
2344 | ||
2345 | if (trans_dp & TRANS_DP_HSYNC_ACTIVE_HIGH) | |
63000ef6 XZ |
2346 | flags |= DRM_MODE_FLAG_PHSYNC; |
2347 | else | |
2348 | flags |= DRM_MODE_FLAG_NHSYNC; | |
045ac3b5 | 2349 | |
b81e34c2 | 2350 | if (trans_dp & TRANS_DP_VSYNC_ACTIVE_HIGH) |
63000ef6 XZ |
2351 | flags |= DRM_MODE_FLAG_PVSYNC; |
2352 | else | |
2353 | flags |= DRM_MODE_FLAG_NVSYNC; | |
2354 | } else { | |
39e5fa88 | 2355 | if (tmp & DP_SYNC_HS_HIGH) |
63000ef6 XZ |
2356 | flags |= DRM_MODE_FLAG_PHSYNC; |
2357 | else | |
2358 | flags |= DRM_MODE_FLAG_NHSYNC; | |
045ac3b5 | 2359 | |
39e5fa88 | 2360 | if (tmp & DP_SYNC_VS_HIGH) |
63000ef6 XZ |
2361 | flags |= DRM_MODE_FLAG_PVSYNC; |
2362 | else | |
2363 | flags |= DRM_MODE_FLAG_NVSYNC; | |
2364 | } | |
045ac3b5 | 2365 | |
2d112de7 | 2366 | pipe_config->base.adjusted_mode.flags |= flags; |
f1f644dc | 2367 | |
8c875fca | 2368 | if (!HAS_PCH_SPLIT(dev) && !IS_VALLEYVIEW(dev) && |
666a4537 | 2369 | !IS_CHERRYVIEW(dev) && tmp & DP_COLOR_RANGE_16_235) |
8c875fca VS |
2370 | pipe_config->limited_color_range = true; |
2371 | ||
eb14cb74 VS |
2372 | pipe_config->has_dp_encoder = true; |
2373 | ||
90a6b7b0 VS |
2374 | pipe_config->lane_count = |
2375 | ((tmp & DP_PORT_WIDTH_MASK) >> DP_PORT_WIDTH_SHIFT) + 1; | |
2376 | ||
eb14cb74 VS |
2377 | intel_dp_get_m_n(crtc, pipe_config); |
2378 | ||
18442d08 | 2379 | if (port == PORT_A) { |
b377e0df | 2380 | if ((I915_READ(DP_A) & DP_PLL_FREQ_MASK) == DP_PLL_FREQ_162MHZ) |
f1f644dc JB |
2381 | pipe_config->port_clock = 162000; |
2382 | else | |
2383 | pipe_config->port_clock = 270000; | |
2384 | } | |
18442d08 | 2385 | |
e3b247da VS |
2386 | pipe_config->base.adjusted_mode.crtc_clock = |
2387 | intel_dotclock_calculate(pipe_config->port_clock, | |
2388 | &pipe_config->dp_m_n); | |
7f16e5c1 | 2389 | |
6aa23e65 JN |
2390 | if (is_edp(intel_dp) && dev_priv->vbt.edp.bpp && |
2391 | pipe_config->pipe_bpp > dev_priv->vbt.edp.bpp) { | |
c6cd2ee2 JN |
2392 | /* |
2393 | * This is a big fat ugly hack. | |
2394 | * | |
2395 | * Some machines in UEFI boot mode provide us a VBT that has 18 | |
2396 | * bpp and 1.62 GHz link bandwidth for eDP, which for reasons | |
2397 | * unknown we fail to light up. Yet the same BIOS boots up with | |
2398 | * 24 bpp and 2.7 GHz link. Use the same bpp as the BIOS uses as | |
2399 | * max, not what it tells us to use. | |
2400 | * | |
2401 | * Note: This will still be broken if the eDP panel is not lit | |
2402 | * up by the BIOS, and thus we can't get the mode at module | |
2403 | * load. | |
2404 | */ | |
2405 | DRM_DEBUG_KMS("pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n", | |
6aa23e65 JN |
2406 | pipe_config->pipe_bpp, dev_priv->vbt.edp.bpp); |
2407 | dev_priv->vbt.edp.bpp = pipe_config->pipe_bpp; | |
c6cd2ee2 | 2408 | } |
045ac3b5 JB |
2409 | } |
2410 | ||
e8cb4558 | 2411 | static void intel_disable_dp(struct intel_encoder *encoder) |
d240f20f | 2412 | { |
e8cb4558 | 2413 | struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); |
982a3866 | 2414 | struct drm_device *dev = encoder->base.dev; |
495a5bb8 JN |
2415 | struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); |
2416 | ||
6e3c9717 | 2417 | if (crtc->config->has_audio) |
495a5bb8 | 2418 | intel_audio_codec_disable(encoder); |
6cb49835 | 2419 | |
b32c6f48 RV |
2420 | if (HAS_PSR(dev) && !HAS_DDI(dev)) |
2421 | intel_psr_disable(intel_dp); | |
2422 | ||
6cb49835 DV |
2423 | /* Make sure the panel is off before trying to change the mode. But also |
2424 | * ensure that we have vdd while we switch off the panel. */ | |
24f3e092 | 2425 | intel_edp_panel_vdd_on(intel_dp); |
4be73780 | 2426 | intel_edp_backlight_off(intel_dp); |
fdbc3b1f | 2427 | intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF); |
4be73780 | 2428 | intel_edp_panel_off(intel_dp); |
3739850b | 2429 | |
08aff3fe VS |
2430 | /* disable the port before the pipe on g4x */ |
2431 | if (INTEL_INFO(dev)->gen < 5) | |
3739850b | 2432 | intel_dp_link_down(intel_dp); |
d240f20f JB |
2433 | } |
2434 | ||
08aff3fe | 2435 | static void ilk_post_disable_dp(struct intel_encoder *encoder) |
d240f20f | 2436 | { |
2bd2ad64 | 2437 | struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); |
982a3866 | 2438 | enum port port = dp_to_dig_port(intel_dp)->port; |
2bd2ad64 | 2439 | |
49277c31 | 2440 | intel_dp_link_down(intel_dp); |
abfce949 VS |
2441 | |
2442 | /* Only ilk+ has port A */ | |
08aff3fe VS |
2443 | if (port == PORT_A) |
2444 | ironlake_edp_pll_off(intel_dp); | |
49277c31 VS |
2445 | } |
2446 | ||
2447 | static void vlv_post_disable_dp(struct intel_encoder *encoder) | |
2448 | { | |
2449 | struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); | |
2450 | ||
2451 | intel_dp_link_down(intel_dp); | |
2bd2ad64 DV |
2452 | } |
2453 | ||
a8f327fb VS |
2454 | static void chv_data_lane_soft_reset(struct intel_encoder *encoder, |
2455 | bool reset) | |
580d3811 | 2456 | { |
a8f327fb VS |
2457 | struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
2458 | enum dpio_channel ch = vlv_dport_to_channel(enc_to_dig_port(&encoder->base)); | |
2459 | struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); | |
2460 | enum pipe pipe = crtc->pipe; | |
2461 | uint32_t val; | |
580d3811 | 2462 | |
a8f327fb VS |
2463 | val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW0(ch)); |
2464 | if (reset) | |
2465 | val &= ~(DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET); | |
2466 | else | |
2467 | val |= DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET; | |
2468 | vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW0(ch), val); | |
580d3811 | 2469 | |
a8f327fb VS |
2470 | if (crtc->config->lane_count > 2) { |
2471 | val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW0(ch)); | |
2472 | if (reset) | |
2473 | val &= ~(DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET); | |
2474 | else | |
2475 | val |= DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET; | |
2476 | vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW0(ch), val); | |
2477 | } | |
580d3811 | 2478 | |
97fd4d5c | 2479 | val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW1(ch)); |
d2152b25 | 2480 | val |= CHV_PCS_REQ_SOFTRESET_EN; |
a8f327fb VS |
2481 | if (reset) |
2482 | val &= ~DPIO_PCS_CLK_SOFT_RESET; | |
2483 | else | |
2484 | val |= DPIO_PCS_CLK_SOFT_RESET; | |
97fd4d5c | 2485 | vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW1(ch), val); |
d2152b25 | 2486 | |
a8f327fb | 2487 | if (crtc->config->lane_count > 2) { |
e0fce78f VS |
2488 | val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW1(ch)); |
2489 | val |= CHV_PCS_REQ_SOFTRESET_EN; | |
a8f327fb VS |
2490 | if (reset) |
2491 | val &= ~DPIO_PCS_CLK_SOFT_RESET; | |
2492 | else | |
2493 | val |= DPIO_PCS_CLK_SOFT_RESET; | |
e0fce78f VS |
2494 | vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW1(ch), val); |
2495 | } | |
a8f327fb | 2496 | } |
97fd4d5c | 2497 | |
a8f327fb VS |
2498 | static void chv_post_disable_dp(struct intel_encoder *encoder) |
2499 | { | |
2500 | struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); | |
2501 | struct drm_device *dev = encoder->base.dev; | |
2502 | struct drm_i915_private *dev_priv = dev->dev_private; | |
97fd4d5c | 2503 | |
a8f327fb VS |
2504 | intel_dp_link_down(intel_dp); |
2505 | ||
2506 | mutex_lock(&dev_priv->sb_lock); | |
2507 | ||
2508 | /* Assert data lane reset */ | |
2509 | chv_data_lane_soft_reset(encoder, true); | |
580d3811 | 2510 | |
a580516d | 2511 | mutex_unlock(&dev_priv->sb_lock); |
580d3811 VS |
2512 | } |
2513 | ||
7b13b58a VS |
2514 | static void |
2515 | _intel_dp_set_link_train(struct intel_dp *intel_dp, | |
2516 | uint32_t *DP, | |
2517 | uint8_t dp_train_pat) | |
2518 | { | |
2519 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); | |
2520 | struct drm_device *dev = intel_dig_port->base.base.dev; | |
2521 | struct drm_i915_private *dev_priv = dev->dev_private; | |
2522 | enum port port = intel_dig_port->port; | |
2523 | ||
2524 | if (HAS_DDI(dev)) { | |
2525 | uint32_t temp = I915_READ(DP_TP_CTL(port)); | |
2526 | ||
2527 | if (dp_train_pat & DP_LINK_SCRAMBLING_DISABLE) | |
2528 | temp |= DP_TP_CTL_SCRAMBLE_DISABLE; | |
2529 | else | |
2530 | temp &= ~DP_TP_CTL_SCRAMBLE_DISABLE; | |
2531 | ||
2532 | temp &= ~DP_TP_CTL_LINK_TRAIN_MASK; | |
2533 | switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) { | |
2534 | case DP_TRAINING_PATTERN_DISABLE: | |
2535 | temp |= DP_TP_CTL_LINK_TRAIN_NORMAL; | |
2536 | ||
2537 | break; | |
2538 | case DP_TRAINING_PATTERN_1: | |
2539 | temp |= DP_TP_CTL_LINK_TRAIN_PAT1; | |
2540 | break; | |
2541 | case DP_TRAINING_PATTERN_2: | |
2542 | temp |= DP_TP_CTL_LINK_TRAIN_PAT2; | |
2543 | break; | |
2544 | case DP_TRAINING_PATTERN_3: | |
2545 | temp |= DP_TP_CTL_LINK_TRAIN_PAT3; | |
2546 | break; | |
2547 | } | |
2548 | I915_WRITE(DP_TP_CTL(port), temp); | |
2549 | ||
39e5fa88 VS |
2550 | } else if ((IS_GEN7(dev) && port == PORT_A) || |
2551 | (HAS_PCH_CPT(dev) && port != PORT_A)) { | |
7b13b58a VS |
2552 | *DP &= ~DP_LINK_TRAIN_MASK_CPT; |
2553 | ||
2554 | switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) { | |
2555 | case DP_TRAINING_PATTERN_DISABLE: | |
2556 | *DP |= DP_LINK_TRAIN_OFF_CPT; | |
2557 | break; | |
2558 | case DP_TRAINING_PATTERN_1: | |
2559 | *DP |= DP_LINK_TRAIN_PAT_1_CPT; | |
2560 | break; | |
2561 | case DP_TRAINING_PATTERN_2: | |
2562 | *DP |= DP_LINK_TRAIN_PAT_2_CPT; | |
2563 | break; | |
2564 | case DP_TRAINING_PATTERN_3: | |
2565 | DRM_ERROR("DP training pattern 3 not supported\n"); | |
2566 | *DP |= DP_LINK_TRAIN_PAT_2_CPT; | |
2567 | break; | |
2568 | } | |
2569 | ||
2570 | } else { | |
2571 | if (IS_CHERRYVIEW(dev)) | |
2572 | *DP &= ~DP_LINK_TRAIN_MASK_CHV; | |
2573 | else | |
2574 | *DP &= ~DP_LINK_TRAIN_MASK; | |
2575 | ||
2576 | switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) { | |
2577 | case DP_TRAINING_PATTERN_DISABLE: | |
2578 | *DP |= DP_LINK_TRAIN_OFF; | |
2579 | break; | |
2580 | case DP_TRAINING_PATTERN_1: | |
2581 | *DP |= DP_LINK_TRAIN_PAT_1; | |
2582 | break; | |
2583 | case DP_TRAINING_PATTERN_2: | |
2584 | *DP |= DP_LINK_TRAIN_PAT_2; | |
2585 | break; | |
2586 | case DP_TRAINING_PATTERN_3: | |
2587 | if (IS_CHERRYVIEW(dev)) { | |
2588 | *DP |= DP_LINK_TRAIN_PAT_3_CHV; | |
2589 | } else { | |
2590 | DRM_ERROR("DP training pattern 3 not supported\n"); | |
2591 | *DP |= DP_LINK_TRAIN_PAT_2; | |
2592 | } | |
2593 | break; | |
2594 | } | |
2595 | } | |
2596 | } | |
2597 | ||
2598 | static void intel_dp_enable_port(struct intel_dp *intel_dp) | |
2599 | { | |
2600 | struct drm_device *dev = intel_dp_to_dev(intel_dp); | |
2601 | struct drm_i915_private *dev_priv = dev->dev_private; | |
6fec7662 VS |
2602 | struct intel_crtc *crtc = |
2603 | to_intel_crtc(dp_to_dig_port(intel_dp)->base.base.crtc); | |
7b13b58a | 2604 | |
7b13b58a VS |
2605 | /* enable with pattern 1 (as per spec) */ |
2606 | _intel_dp_set_link_train(intel_dp, &intel_dp->DP, | |
2607 | DP_TRAINING_PATTERN_1); | |
2608 | ||
2609 | I915_WRITE(intel_dp->output_reg, intel_dp->DP); | |
2610 | POSTING_READ(intel_dp->output_reg); | |
7b713f50 VS |
2611 | |
2612 | /* | |
2613 | * Magic for VLV/CHV. We _must_ first set up the register | |
2614 | * without actually enabling the port, and then do another | |
2615 | * write to enable the port. Otherwise link training will | |
2616 | * fail when the power sequencer is freshly used for this port. | |
2617 | */ | |
2618 | intel_dp->DP |= DP_PORT_EN; | |
6fec7662 VS |
2619 | if (crtc->config->has_audio) |
2620 | intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE; | |
7b713f50 VS |
2621 | |
2622 | I915_WRITE(intel_dp->output_reg, intel_dp->DP); | |
2623 | POSTING_READ(intel_dp->output_reg); | |
580d3811 VS |
2624 | } |
2625 | ||
e8cb4558 | 2626 | static void intel_enable_dp(struct intel_encoder *encoder) |
d240f20f | 2627 | { |
e8cb4558 DV |
2628 | struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); |
2629 | struct drm_device *dev = encoder->base.dev; | |
2630 | struct drm_i915_private *dev_priv = dev->dev_private; | |
c1dec79a | 2631 | struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); |
e8cb4558 | 2632 | uint32_t dp_reg = I915_READ(intel_dp->output_reg); |
d6fbdd15 VS |
2633 | enum port port = dp_to_dig_port(intel_dp)->port; |
2634 | enum pipe pipe = crtc->pipe; | |
5d613501 | 2635 | |
0c33d8d7 DV |
2636 | if (WARN_ON(dp_reg & DP_PORT_EN)) |
2637 | return; | |
5d613501 | 2638 | |
093e3f13 VS |
2639 | pps_lock(intel_dp); |
2640 | ||
666a4537 | 2641 | if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) |
093e3f13 VS |
2642 | vlv_init_panel_power_sequencer(intel_dp); |
2643 | ||
7b13b58a | 2644 | intel_dp_enable_port(intel_dp); |
093e3f13 | 2645 | |
d6fbdd15 VS |
2646 | if (port == PORT_A && IS_GEN5(dev_priv)) { |
2647 | /* | |
2648 | * Underrun reporting for the other pipe was disabled in | |
2649 | * g4x_pre_enable_dp(). The eDP PLL and port have now been | |
2650 | * enabled, so it's now safe to re-enable underrun reporting. | |
2651 | */ | |
2652 | intel_wait_for_vblank_if_active(dev_priv->dev, !pipe); | |
2653 | intel_set_cpu_fifo_underrun_reporting(dev_priv, !pipe, true); | |
2654 | intel_set_pch_fifo_underrun_reporting(dev_priv, !pipe, true); | |
2655 | } | |
2656 | ||
093e3f13 VS |
2657 | edp_panel_vdd_on(intel_dp); |
2658 | edp_panel_on(intel_dp); | |
2659 | edp_panel_vdd_off(intel_dp, true); | |
2660 | ||
2661 | pps_unlock(intel_dp); | |
2662 | ||
666a4537 | 2663 | if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) { |
e0fce78f VS |
2664 | unsigned int lane_mask = 0x0; |
2665 | ||
2666 | if (IS_CHERRYVIEW(dev)) | |
2667 | lane_mask = intel_dp_unused_lane_mask(crtc->config->lane_count); | |
2668 | ||
9b6de0a1 VS |
2669 | vlv_wait_port_ready(dev_priv, dp_to_dig_port(intel_dp), |
2670 | lane_mask); | |
e0fce78f | 2671 | } |
61234fa5 | 2672 | |
f01eca2e | 2673 | intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); |
33a34e4e | 2674 | intel_dp_start_link_train(intel_dp); |
3ab9c637 | 2675 | intel_dp_stop_link_train(intel_dp); |
c1dec79a | 2676 | |
6e3c9717 | 2677 | if (crtc->config->has_audio) { |
c1dec79a | 2678 | DRM_DEBUG_DRIVER("Enabling DP audio on pipe %c\n", |
d6fbdd15 | 2679 | pipe_name(pipe)); |
c1dec79a JN |
2680 | intel_audio_codec_enable(encoder); |
2681 | } | |
ab1f90f9 | 2682 | } |
89b667f8 | 2683 | |
ecff4f3b JN |
2684 | static void g4x_enable_dp(struct intel_encoder *encoder) |
2685 | { | |
828f5c6e JN |
2686 | struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); |
2687 | ||
ecff4f3b | 2688 | intel_enable_dp(encoder); |
4be73780 | 2689 | intel_edp_backlight_on(intel_dp); |
ab1f90f9 | 2690 | } |
89b667f8 | 2691 | |
ab1f90f9 JN |
2692 | static void vlv_enable_dp(struct intel_encoder *encoder) |
2693 | { | |
828f5c6e JN |
2694 | struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); |
2695 | ||
4be73780 | 2696 | intel_edp_backlight_on(intel_dp); |
b32c6f48 | 2697 | intel_psr_enable(intel_dp); |
d240f20f JB |
2698 | } |
2699 | ||
ecff4f3b | 2700 | static void g4x_pre_enable_dp(struct intel_encoder *encoder) |
ab1f90f9 | 2701 | { |
d6fbdd15 | 2702 | struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
ab1f90f9 | 2703 | struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); |
d6fbdd15 VS |
2704 | enum port port = dp_to_dig_port(intel_dp)->port; |
2705 | enum pipe pipe = to_intel_crtc(encoder->base.crtc)->pipe; | |
ab1f90f9 | 2706 | |
8ac33ed3 DV |
2707 | intel_dp_prepare(encoder); |
2708 | ||
d6fbdd15 VS |
2709 | if (port == PORT_A && IS_GEN5(dev_priv)) { |
2710 | /* | |
2711 | * We get FIFO underruns on the other pipe when | |
2712 | * enabling the CPU eDP PLL, and when enabling CPU | |
2713 | * eDP port. We could potentially avoid the PLL | |
2714 | * underrun with a vblank wait just prior to enabling | |
2715 | * the PLL, but that doesn't appear to help the port | |
2716 | * enable case. Just sweep it all under the rug. | |
2717 | */ | |
2718 | intel_set_cpu_fifo_underrun_reporting(dev_priv, !pipe, false); | |
2719 | intel_set_pch_fifo_underrun_reporting(dev_priv, !pipe, false); | |
2720 | } | |
2721 | ||
d41f1efb | 2722 | /* Only ilk+ has port A */ |
abfce949 | 2723 | if (port == PORT_A) |
ab1f90f9 JN |
2724 | ironlake_edp_pll_on(intel_dp); |
2725 | } | |
2726 | ||
83b84597 VS |
2727 | static void vlv_detach_power_sequencer(struct intel_dp *intel_dp) |
2728 | { | |
2729 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); | |
2730 | struct drm_i915_private *dev_priv = intel_dig_port->base.base.dev->dev_private; | |
2731 | enum pipe pipe = intel_dp->pps_pipe; | |
f0f59a00 | 2732 | i915_reg_t pp_on_reg = VLV_PIPE_PP_ON_DELAYS(pipe); |
83b84597 VS |
2733 | |
2734 | edp_panel_vdd_off_sync(intel_dp); | |
2735 | ||
2736 | /* | |
2737 | * VLV seems to get confused when multiple power seqeuencers | |
2738 | * have the same port selected (even if only one has power/vdd | |
2739 | * enabled). The failure manifests as vlv_wait_port_ready() failing | |
2740 | * CHV on the other hand doesn't seem to mind having the same port | |
2741 | * selected in multiple power seqeuencers, but let's clear the | |
2742 | * port select always when logically disconnecting a power sequencer | |
2743 | * from a port. | |
2744 | */ | |
2745 | DRM_DEBUG_KMS("detaching pipe %c power sequencer from port %c\n", | |
2746 | pipe_name(pipe), port_name(intel_dig_port->port)); | |
2747 | I915_WRITE(pp_on_reg, 0); | |
2748 | POSTING_READ(pp_on_reg); | |
2749 | ||
2750 | intel_dp->pps_pipe = INVALID_PIPE; | |
2751 | } | |
2752 | ||
a4a5d2f8 VS |
2753 | static void vlv_steal_power_sequencer(struct drm_device *dev, |
2754 | enum pipe pipe) | |
2755 | { | |
2756 | struct drm_i915_private *dev_priv = dev->dev_private; | |
2757 | struct intel_encoder *encoder; | |
2758 | ||
2759 | lockdep_assert_held(&dev_priv->pps_mutex); | |
2760 | ||
ac3c12e4 VS |
2761 | if (WARN_ON(pipe != PIPE_A && pipe != PIPE_B)) |
2762 | return; | |
2763 | ||
19c8054c | 2764 | for_each_intel_encoder(dev, encoder) { |
a4a5d2f8 | 2765 | struct intel_dp *intel_dp; |
773538e8 | 2766 | enum port port; |
a4a5d2f8 VS |
2767 | |
2768 | if (encoder->type != INTEL_OUTPUT_EDP) | |
2769 | continue; | |
2770 | ||
2771 | intel_dp = enc_to_intel_dp(&encoder->base); | |
773538e8 | 2772 | port = dp_to_dig_port(intel_dp)->port; |
a4a5d2f8 VS |
2773 | |
2774 | if (intel_dp->pps_pipe != pipe) | |
2775 | continue; | |
2776 | ||
2777 | DRM_DEBUG_KMS("stealing pipe %c power sequencer from port %c\n", | |
773538e8 | 2778 | pipe_name(pipe), port_name(port)); |
a4a5d2f8 | 2779 | |
e02f9a06 | 2780 | WARN(encoder->base.crtc, |
034e43c6 VS |
2781 | "stealing pipe %c power sequencer from active eDP port %c\n", |
2782 | pipe_name(pipe), port_name(port)); | |
a4a5d2f8 | 2783 | |
a4a5d2f8 | 2784 | /* make sure vdd is off before we steal it */ |
83b84597 | 2785 | vlv_detach_power_sequencer(intel_dp); |
a4a5d2f8 VS |
2786 | } |
2787 | } | |
2788 | ||
2789 | static void vlv_init_panel_power_sequencer(struct intel_dp *intel_dp) | |
2790 | { | |
2791 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); | |
2792 | struct intel_encoder *encoder = &intel_dig_port->base; | |
2793 | struct drm_device *dev = encoder->base.dev; | |
2794 | struct drm_i915_private *dev_priv = dev->dev_private; | |
2795 | struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); | |
a4a5d2f8 VS |
2796 | |
2797 | lockdep_assert_held(&dev_priv->pps_mutex); | |
2798 | ||
093e3f13 VS |
2799 | if (!is_edp(intel_dp)) |
2800 | return; | |
2801 | ||
a4a5d2f8 VS |
2802 | if (intel_dp->pps_pipe == crtc->pipe) |
2803 | return; | |
2804 | ||
2805 | /* | |
2806 | * If another power sequencer was being used on this | |
2807 | * port previously make sure to turn off vdd there while | |
2808 | * we still have control of it. | |
2809 | */ | |
2810 | if (intel_dp->pps_pipe != INVALID_PIPE) | |
83b84597 | 2811 | vlv_detach_power_sequencer(intel_dp); |
a4a5d2f8 VS |
2812 | |
2813 | /* | |
2814 | * We may be stealing the power | |
2815 | * sequencer from another port. | |
2816 | */ | |
2817 | vlv_steal_power_sequencer(dev, crtc->pipe); | |
2818 | ||
2819 | /* now it's all ours */ | |
2820 | intel_dp->pps_pipe = crtc->pipe; | |
2821 | ||
2822 | DRM_DEBUG_KMS("initializing pipe %c power sequencer for port %c\n", | |
2823 | pipe_name(intel_dp->pps_pipe), port_name(intel_dig_port->port)); | |
2824 | ||
2825 | /* init power sequencer on this pipe and port */ | |
36b5f425 VS |
2826 | intel_dp_init_panel_power_sequencer(dev, intel_dp); |
2827 | intel_dp_init_panel_power_sequencer_registers(dev, intel_dp); | |
a4a5d2f8 VS |
2828 | } |
2829 | ||
ab1f90f9 | 2830 | static void vlv_pre_enable_dp(struct intel_encoder *encoder) |
a4fc5ed6 | 2831 | { |
2bd2ad64 | 2832 | struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); |
bc7d38a4 | 2833 | struct intel_digital_port *dport = dp_to_dig_port(intel_dp); |
b2634017 | 2834 | struct drm_device *dev = encoder->base.dev; |
89b667f8 | 2835 | struct drm_i915_private *dev_priv = dev->dev_private; |
ab1f90f9 | 2836 | struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); |
e4607fcf | 2837 | enum dpio_channel port = vlv_dport_to_channel(dport); |
ab1f90f9 JN |
2838 | int pipe = intel_crtc->pipe; |
2839 | u32 val; | |
a4fc5ed6 | 2840 | |
a580516d | 2841 | mutex_lock(&dev_priv->sb_lock); |
89b667f8 | 2842 | |
ab3c759a | 2843 | val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW8(port)); |
ab1f90f9 JN |
2844 | val = 0; |
2845 | if (pipe) | |
2846 | val |= (1<<21); | |
2847 | else | |
2848 | val &= ~(1<<21); | |
2849 | val |= 0x001000c4; | |
ab3c759a CML |
2850 | vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW8(port), val); |
2851 | vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW14(port), 0x00760018); | |
2852 | vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW23(port), 0x00400888); | |
89b667f8 | 2853 | |
a580516d | 2854 | mutex_unlock(&dev_priv->sb_lock); |
ab1f90f9 JN |
2855 | |
2856 | intel_enable_dp(encoder); | |
89b667f8 JB |
2857 | } |
2858 | ||
ecff4f3b | 2859 | static void vlv_dp_pre_pll_enable(struct intel_encoder *encoder) |
89b667f8 JB |
2860 | { |
2861 | struct intel_digital_port *dport = enc_to_dig_port(&encoder->base); | |
2862 | struct drm_device *dev = encoder->base.dev; | |
2863 | struct drm_i915_private *dev_priv = dev->dev_private; | |
5e69f97f CML |
2864 | struct intel_crtc *intel_crtc = |
2865 | to_intel_crtc(encoder->base.crtc); | |
e4607fcf | 2866 | enum dpio_channel port = vlv_dport_to_channel(dport); |
5e69f97f | 2867 | int pipe = intel_crtc->pipe; |
89b667f8 | 2868 | |
8ac33ed3 DV |
2869 | intel_dp_prepare(encoder); |
2870 | ||
89b667f8 | 2871 | /* Program Tx lane resets to default */ |
a580516d | 2872 | mutex_lock(&dev_priv->sb_lock); |
ab3c759a | 2873 | vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW0(port), |
89b667f8 JB |
2874 | DPIO_PCS_TX_LANE2_RESET | |
2875 | DPIO_PCS_TX_LANE1_RESET); | |
ab3c759a | 2876 | vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW1(port), |
89b667f8 JB |
2877 | DPIO_PCS_CLK_CRI_RXEB_EIOS_EN | |
2878 | DPIO_PCS_CLK_CRI_RXDIGFILTSG_EN | | |
2879 | (1<<DPIO_PCS_CLK_DATAWIDTH_SHIFT) | | |
2880 | DPIO_PCS_CLK_SOFT_RESET); | |
2881 | ||
2882 | /* Fix up inter-pair skew failure */ | |
ab3c759a CML |
2883 | vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW12(port), 0x00750f00); |
2884 | vlv_dpio_write(dev_priv, pipe, VLV_TX_DW11(port), 0x00001500); | |
2885 | vlv_dpio_write(dev_priv, pipe, VLV_TX_DW14(port), 0x40400000); | |
a580516d | 2886 | mutex_unlock(&dev_priv->sb_lock); |
a4fc5ed6 KP |
2887 | } |
2888 | ||
e4a1d846 CML |
2889 | static void chv_pre_enable_dp(struct intel_encoder *encoder) |
2890 | { | |
2891 | struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); | |
2892 | struct intel_digital_port *dport = dp_to_dig_port(intel_dp); | |
2893 | struct drm_device *dev = encoder->base.dev; | |
2894 | struct drm_i915_private *dev_priv = dev->dev_private; | |
e4a1d846 CML |
2895 | struct intel_crtc *intel_crtc = |
2896 | to_intel_crtc(encoder->base.crtc); | |
2897 | enum dpio_channel ch = vlv_dport_to_channel(dport); | |
2898 | int pipe = intel_crtc->pipe; | |
2e523e98 | 2899 | int data, i, stagger; |
949c1d43 | 2900 | u32 val; |
e4a1d846 | 2901 | |
a580516d | 2902 | mutex_lock(&dev_priv->sb_lock); |
949c1d43 | 2903 | |
570e2a74 VS |
2904 | /* allow hardware to manage TX FIFO reset source */ |
2905 | val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW11(ch)); | |
2906 | val &= ~DPIO_LANEDESKEW_STRAP_OVRD; | |
2907 | vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW11(ch), val); | |
2908 | ||
e0fce78f VS |
2909 | if (intel_crtc->config->lane_count > 2) { |
2910 | val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW11(ch)); | |
2911 | val &= ~DPIO_LANEDESKEW_STRAP_OVRD; | |
2912 | vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW11(ch), val); | |
2913 | } | |
570e2a74 | 2914 | |
949c1d43 | 2915 | /* Program Tx lane latency optimal setting*/ |
e0fce78f | 2916 | for (i = 0; i < intel_crtc->config->lane_count; i++) { |
e4a1d846 | 2917 | /* Set the upar bit */ |
e0fce78f VS |
2918 | if (intel_crtc->config->lane_count == 1) |
2919 | data = 0x0; | |
2920 | else | |
2921 | data = (i == 1) ? 0x0 : 0x1; | |
e4a1d846 CML |
2922 | vlv_dpio_write(dev_priv, pipe, CHV_TX_DW14(ch, i), |
2923 | data << DPIO_UPAR_SHIFT); | |
2924 | } | |
2925 | ||
2926 | /* Data lane stagger programming */ | |
2e523e98 VS |
2927 | if (intel_crtc->config->port_clock > 270000) |
2928 | stagger = 0x18; | |
2929 | else if (intel_crtc->config->port_clock > 135000) | |
2930 | stagger = 0xd; | |
2931 | else if (intel_crtc->config->port_clock > 67500) | |
2932 | stagger = 0x7; | |
2933 | else if (intel_crtc->config->port_clock > 33750) | |
2934 | stagger = 0x4; | |
2935 | else | |
2936 | stagger = 0x2; | |
2937 | ||
2938 | val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW11(ch)); | |
2939 | val |= DPIO_TX2_STAGGER_MASK(0x1f); | |
2940 | vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW11(ch), val); | |
2941 | ||
e0fce78f VS |
2942 | if (intel_crtc->config->lane_count > 2) { |
2943 | val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW11(ch)); | |
2944 | val |= DPIO_TX2_STAGGER_MASK(0x1f); | |
2945 | vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW11(ch), val); | |
2946 | } | |
2e523e98 VS |
2947 | |
2948 | vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW12(ch), | |
2949 | DPIO_LANESTAGGER_STRAP(stagger) | | |
2950 | DPIO_LANESTAGGER_STRAP_OVRD | | |
2951 | DPIO_TX1_STAGGER_MASK(0x1f) | | |
2952 | DPIO_TX1_STAGGER_MULT(6) | | |
2953 | DPIO_TX2_STAGGER_MULT(0)); | |
2954 | ||
e0fce78f VS |
2955 | if (intel_crtc->config->lane_count > 2) { |
2956 | vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW12(ch), | |
2957 | DPIO_LANESTAGGER_STRAP(stagger) | | |
2958 | DPIO_LANESTAGGER_STRAP_OVRD | | |
2959 | DPIO_TX1_STAGGER_MASK(0x1f) | | |
2960 | DPIO_TX1_STAGGER_MULT(7) | | |
2961 | DPIO_TX2_STAGGER_MULT(5)); | |
2962 | } | |
e4a1d846 | 2963 | |
a8f327fb VS |
2964 | /* Deassert data lane reset */ |
2965 | chv_data_lane_soft_reset(encoder, false); | |
2966 | ||
a580516d | 2967 | mutex_unlock(&dev_priv->sb_lock); |
e4a1d846 | 2968 | |
e4a1d846 | 2969 | intel_enable_dp(encoder); |
b0b33846 VS |
2970 | |
2971 | /* Second common lane will stay alive on its own now */ | |
2972 | if (dport->release_cl2_override) { | |
2973 | chv_phy_powergate_ch(dev_priv, DPIO_PHY0, DPIO_CH1, false); | |
2974 | dport->release_cl2_override = false; | |
2975 | } | |
e4a1d846 CML |
2976 | } |
2977 | ||
9197c88b VS |
2978 | static void chv_dp_pre_pll_enable(struct intel_encoder *encoder) |
2979 | { | |
2980 | struct intel_digital_port *dport = enc_to_dig_port(&encoder->base); | |
2981 | struct drm_device *dev = encoder->base.dev; | |
2982 | struct drm_i915_private *dev_priv = dev->dev_private; | |
2983 | struct intel_crtc *intel_crtc = | |
2984 | to_intel_crtc(encoder->base.crtc); | |
2985 | enum dpio_channel ch = vlv_dport_to_channel(dport); | |
2986 | enum pipe pipe = intel_crtc->pipe; | |
e0fce78f VS |
2987 | unsigned int lane_mask = |
2988 | intel_dp_unused_lane_mask(intel_crtc->config->lane_count); | |
9197c88b VS |
2989 | u32 val; |
2990 | ||
625695f8 VS |
2991 | intel_dp_prepare(encoder); |
2992 | ||
b0b33846 VS |
2993 | /* |
2994 | * Must trick the second common lane into life. | |
2995 | * Otherwise we can't even access the PLL. | |
2996 | */ | |
2997 | if (ch == DPIO_CH0 && pipe == PIPE_B) | |
2998 | dport->release_cl2_override = | |
2999 | !chv_phy_powergate_ch(dev_priv, DPIO_PHY0, DPIO_CH1, true); | |
3000 | ||
e0fce78f VS |
3001 | chv_phy_powergate_lanes(encoder, true, lane_mask); |
3002 | ||
a580516d | 3003 | mutex_lock(&dev_priv->sb_lock); |
9197c88b | 3004 | |
a8f327fb VS |
3005 | /* Assert data lane reset */ |
3006 | chv_data_lane_soft_reset(encoder, true); | |
3007 | ||
b9e5ac3c VS |
3008 | /* program left/right clock distribution */ |
3009 | if (pipe != PIPE_B) { | |
3010 | val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW5_CH0); | |
3011 | val &= ~(CHV_BUFLEFTENA1_MASK | CHV_BUFRIGHTENA1_MASK); | |
3012 | if (ch == DPIO_CH0) | |
3013 | val |= CHV_BUFLEFTENA1_FORCE; | |
3014 | if (ch == DPIO_CH1) | |
3015 | val |= CHV_BUFRIGHTENA1_FORCE; | |
3016 | vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW5_CH0, val); | |
3017 | } else { | |
3018 | val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW1_CH1); | |
3019 | val &= ~(CHV_BUFLEFTENA2_MASK | CHV_BUFRIGHTENA2_MASK); | |
3020 | if (ch == DPIO_CH0) | |
3021 | val |= CHV_BUFLEFTENA2_FORCE; | |
3022 | if (ch == DPIO_CH1) | |
3023 | val |= CHV_BUFRIGHTENA2_FORCE; | |
3024 | vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW1_CH1, val); | |
3025 | } | |
3026 | ||
9197c88b VS |
3027 | /* program clock channel usage */ |
3028 | val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW8(ch)); | |
3029 | val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE; | |
3030 | if (pipe != PIPE_B) | |
3031 | val &= ~CHV_PCS_USEDCLKCHANNEL; | |
3032 | else | |
3033 | val |= CHV_PCS_USEDCLKCHANNEL; | |
3034 | vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW8(ch), val); | |
3035 | ||
e0fce78f VS |
3036 | if (intel_crtc->config->lane_count > 2) { |
3037 | val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW8(ch)); | |
3038 | val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE; | |
3039 | if (pipe != PIPE_B) | |
3040 | val &= ~CHV_PCS_USEDCLKCHANNEL; | |
3041 | else | |
3042 | val |= CHV_PCS_USEDCLKCHANNEL; | |
3043 | vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW8(ch), val); | |
3044 | } | |
9197c88b VS |
3045 | |
3046 | /* | |
3047 | * This a a bit weird since generally CL | |
3048 | * matches the pipe, but here we need to | |
3049 | * pick the CL based on the port. | |
3050 | */ | |
3051 | val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW19(ch)); | |
3052 | if (pipe != PIPE_B) | |
3053 | val &= ~CHV_CMN_USEDCLKCHANNEL; | |
3054 | else | |
3055 | val |= CHV_CMN_USEDCLKCHANNEL; | |
3056 | vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW19(ch), val); | |
3057 | ||
a580516d | 3058 | mutex_unlock(&dev_priv->sb_lock); |
9197c88b VS |
3059 | } |
3060 | ||
d6db995f VS |
3061 | static void chv_dp_post_pll_disable(struct intel_encoder *encoder) |
3062 | { | |
3063 | struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); | |
3064 | enum pipe pipe = to_intel_crtc(encoder->base.crtc)->pipe; | |
3065 | u32 val; | |
3066 | ||
3067 | mutex_lock(&dev_priv->sb_lock); | |
3068 | ||
3069 | /* disable left/right clock distribution */ | |
3070 | if (pipe != PIPE_B) { | |
3071 | val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW5_CH0); | |
3072 | val &= ~(CHV_BUFLEFTENA1_MASK | CHV_BUFRIGHTENA1_MASK); | |
3073 | vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW5_CH0, val); | |
3074 | } else { | |
3075 | val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW1_CH1); | |
3076 | val &= ~(CHV_BUFLEFTENA2_MASK | CHV_BUFRIGHTENA2_MASK); | |
3077 | vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW1_CH1, val); | |
3078 | } | |
3079 | ||
3080 | mutex_unlock(&dev_priv->sb_lock); | |
e0fce78f | 3081 | |
b0b33846 VS |
3082 | /* |
3083 | * Leave the power down bit cleared for at least one | |
3084 | * lane so that chv_powergate_phy_ch() will power | |
3085 | * on something when the channel is otherwise unused. | |
3086 | * When the port is off and the override is removed | |
3087 | * the lanes power down anyway, so otherwise it doesn't | |
3088 | * really matter what the state of power down bits is | |
3089 | * after this. | |
3090 | */ | |
e0fce78f | 3091 | chv_phy_powergate_lanes(encoder, false, 0x0); |
d6db995f VS |
3092 | } |
3093 | ||
a4fc5ed6 | 3094 | /* |
df0c237d JB |
3095 | * Native read with retry for link status and receiver capability reads for |
3096 | * cases where the sink may still be asleep. | |
9d1a1031 JN |
3097 | * |
3098 | * Sinks are *supposed* to come up within 1ms from an off state, but we're also | |
3099 | * supposed to retry 3 times per the spec. | |
a4fc5ed6 | 3100 | */ |
9d1a1031 JN |
3101 | static ssize_t |
3102 | intel_dp_dpcd_read_wake(struct drm_dp_aux *aux, unsigned int offset, | |
3103 | void *buffer, size_t size) | |
a4fc5ed6 | 3104 | { |
9d1a1031 JN |
3105 | ssize_t ret; |
3106 | int i; | |
61da5fab | 3107 | |
f6a19066 VS |
3108 | /* |
3109 | * Sometime we just get the same incorrect byte repeated | |
3110 | * over the entire buffer. Doing just one throw away read | |
3111 | * initially seems to "solve" it. | |
3112 | */ | |
3113 | drm_dp_dpcd_read(aux, DP_DPCD_REV, buffer, 1); | |
3114 | ||
61da5fab | 3115 | for (i = 0; i < 3; i++) { |
9d1a1031 JN |
3116 | ret = drm_dp_dpcd_read(aux, offset, buffer, size); |
3117 | if (ret == size) | |
3118 | return ret; | |
61da5fab JB |
3119 | msleep(1); |
3120 | } | |
a4fc5ed6 | 3121 | |
9d1a1031 | 3122 | return ret; |
a4fc5ed6 KP |
3123 | } |
3124 | ||
3125 | /* | |
3126 | * Fetch AUX CH registers 0x202 - 0x207 which contain | |
3127 | * link status information | |
3128 | */ | |
94223d04 | 3129 | bool |
93f62dad | 3130 | intel_dp_get_link_status(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE]) |
a4fc5ed6 | 3131 | { |
9d1a1031 JN |
3132 | return intel_dp_dpcd_read_wake(&intel_dp->aux, |
3133 | DP_LANE0_1_STATUS, | |
3134 | link_status, | |
3135 | DP_LINK_STATUS_SIZE) == DP_LINK_STATUS_SIZE; | |
a4fc5ed6 KP |
3136 | } |
3137 | ||
1100244e | 3138 | /* These are source-specific values. */ |
94223d04 | 3139 | uint8_t |
1a2eb460 | 3140 | intel_dp_voltage_max(struct intel_dp *intel_dp) |
a4fc5ed6 | 3141 | { |
30add22d | 3142 | struct drm_device *dev = intel_dp_to_dev(intel_dp); |
7ad14a29 | 3143 | struct drm_i915_private *dev_priv = dev->dev_private; |
bc7d38a4 | 3144 | enum port port = dp_to_dig_port(intel_dp)->port; |
1a2eb460 | 3145 | |
9314726b VK |
3146 | if (IS_BROXTON(dev)) |
3147 | return DP_TRAIN_VOLTAGE_SWING_LEVEL_3; | |
3148 | else if (INTEL_INFO(dev)->gen >= 9) { | |
06411f08 | 3149 | if (dev_priv->vbt.edp.low_vswing && port == PORT_A) |
7ad14a29 | 3150 | return DP_TRAIN_VOLTAGE_SWING_LEVEL_3; |
5a9d1f1a | 3151 | return DP_TRAIN_VOLTAGE_SWING_LEVEL_2; |
666a4537 | 3152 | } else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) |
bd60018a | 3153 | return DP_TRAIN_VOLTAGE_SWING_LEVEL_3; |
bc7d38a4 | 3154 | else if (IS_GEN7(dev) && port == PORT_A) |
bd60018a | 3155 | return DP_TRAIN_VOLTAGE_SWING_LEVEL_2; |
bc7d38a4 | 3156 | else if (HAS_PCH_CPT(dev) && port != PORT_A) |
bd60018a | 3157 | return DP_TRAIN_VOLTAGE_SWING_LEVEL_3; |
1a2eb460 | 3158 | else |
bd60018a | 3159 | return DP_TRAIN_VOLTAGE_SWING_LEVEL_2; |
1a2eb460 KP |
3160 | } |
3161 | ||
94223d04 | 3162 | uint8_t |
1a2eb460 KP |
3163 | intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing) |
3164 | { | |
30add22d | 3165 | struct drm_device *dev = intel_dp_to_dev(intel_dp); |
bc7d38a4 | 3166 | enum port port = dp_to_dig_port(intel_dp)->port; |
1a2eb460 | 3167 | |
5a9d1f1a DL |
3168 | if (INTEL_INFO(dev)->gen >= 9) { |
3169 | switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { | |
3170 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_0: | |
3171 | return DP_TRAIN_PRE_EMPH_LEVEL_3; | |
3172 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_1: | |
3173 | return DP_TRAIN_PRE_EMPH_LEVEL_2; | |
3174 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_2: | |
3175 | return DP_TRAIN_PRE_EMPH_LEVEL_1; | |
7ad14a29 SJ |
3176 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_3: |
3177 | return DP_TRAIN_PRE_EMPH_LEVEL_0; | |
5a9d1f1a DL |
3178 | default: |
3179 | return DP_TRAIN_PRE_EMPH_LEVEL_0; | |
3180 | } | |
3181 | } else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) { | |
d6c0d722 | 3182 | switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { |
bd60018a SJ |
3183 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_0: |
3184 | return DP_TRAIN_PRE_EMPH_LEVEL_3; | |
3185 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_1: | |
3186 | return DP_TRAIN_PRE_EMPH_LEVEL_2; | |
3187 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_2: | |
3188 | return DP_TRAIN_PRE_EMPH_LEVEL_1; | |
3189 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_3: | |
d6c0d722 | 3190 | default: |
bd60018a | 3191 | return DP_TRAIN_PRE_EMPH_LEVEL_0; |
d6c0d722 | 3192 | } |
666a4537 | 3193 | } else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) { |
e2fa6fba | 3194 | switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { |
bd60018a SJ |
3195 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_0: |
3196 | return DP_TRAIN_PRE_EMPH_LEVEL_3; | |
3197 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_1: | |
3198 | return DP_TRAIN_PRE_EMPH_LEVEL_2; | |
3199 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_2: | |
3200 | return DP_TRAIN_PRE_EMPH_LEVEL_1; | |
3201 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_3: | |
e2fa6fba | 3202 | default: |
bd60018a | 3203 | return DP_TRAIN_PRE_EMPH_LEVEL_0; |
e2fa6fba | 3204 | } |
bc7d38a4 | 3205 | } else if (IS_GEN7(dev) && port == PORT_A) { |
1a2eb460 | 3206 | switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { |
bd60018a SJ |
3207 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_0: |
3208 | return DP_TRAIN_PRE_EMPH_LEVEL_2; | |
3209 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_1: | |
3210 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_2: | |
3211 | return DP_TRAIN_PRE_EMPH_LEVEL_1; | |
1a2eb460 | 3212 | default: |
bd60018a | 3213 | return DP_TRAIN_PRE_EMPH_LEVEL_0; |
1a2eb460 KP |
3214 | } |
3215 | } else { | |
3216 | switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { | |
bd60018a SJ |
3217 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_0: |
3218 | return DP_TRAIN_PRE_EMPH_LEVEL_2; | |
3219 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_1: | |
3220 | return DP_TRAIN_PRE_EMPH_LEVEL_2; | |
3221 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_2: | |
3222 | return DP_TRAIN_PRE_EMPH_LEVEL_1; | |
3223 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_3: | |
1a2eb460 | 3224 | default: |
bd60018a | 3225 | return DP_TRAIN_PRE_EMPH_LEVEL_0; |
1a2eb460 | 3226 | } |
a4fc5ed6 KP |
3227 | } |
3228 | } | |
3229 | ||
5829975c | 3230 | static uint32_t vlv_signal_levels(struct intel_dp *intel_dp) |
e2fa6fba P |
3231 | { |
3232 | struct drm_device *dev = intel_dp_to_dev(intel_dp); | |
3233 | struct drm_i915_private *dev_priv = dev->dev_private; | |
3234 | struct intel_digital_port *dport = dp_to_dig_port(intel_dp); | |
5e69f97f CML |
3235 | struct intel_crtc *intel_crtc = |
3236 | to_intel_crtc(dport->base.base.crtc); | |
e2fa6fba P |
3237 | unsigned long demph_reg_value, preemph_reg_value, |
3238 | uniqtranscale_reg_value; | |
3239 | uint8_t train_set = intel_dp->train_set[0]; | |
e4607fcf | 3240 | enum dpio_channel port = vlv_dport_to_channel(dport); |
5e69f97f | 3241 | int pipe = intel_crtc->pipe; |
e2fa6fba P |
3242 | |
3243 | switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) { | |
bd60018a | 3244 | case DP_TRAIN_PRE_EMPH_LEVEL_0: |
e2fa6fba P |
3245 | preemph_reg_value = 0x0004000; |
3246 | switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { | |
bd60018a | 3247 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_0: |
e2fa6fba P |
3248 | demph_reg_value = 0x2B405555; |
3249 | uniqtranscale_reg_value = 0x552AB83A; | |
3250 | break; | |
bd60018a | 3251 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_1: |
e2fa6fba P |
3252 | demph_reg_value = 0x2B404040; |
3253 | uniqtranscale_reg_value = 0x5548B83A; | |
3254 | break; | |
bd60018a | 3255 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_2: |
e2fa6fba P |
3256 | demph_reg_value = 0x2B245555; |
3257 | uniqtranscale_reg_value = 0x5560B83A; | |
3258 | break; | |
bd60018a | 3259 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_3: |
e2fa6fba P |
3260 | demph_reg_value = 0x2B405555; |
3261 | uniqtranscale_reg_value = 0x5598DA3A; | |
3262 | break; | |
3263 | default: | |
3264 | return 0; | |
3265 | } | |
3266 | break; | |
bd60018a | 3267 | case DP_TRAIN_PRE_EMPH_LEVEL_1: |
e2fa6fba P |
3268 | preemph_reg_value = 0x0002000; |
3269 | switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { | |
bd60018a | 3270 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_0: |
e2fa6fba P |
3271 | demph_reg_value = 0x2B404040; |
3272 | uniqtranscale_reg_value = 0x5552B83A; | |
3273 | break; | |
bd60018a | 3274 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_1: |
e2fa6fba P |
3275 | demph_reg_value = 0x2B404848; |
3276 | uniqtranscale_reg_value = 0x5580B83A; | |
3277 | break; | |
bd60018a | 3278 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_2: |
e2fa6fba P |
3279 | demph_reg_value = 0x2B404040; |
3280 | uniqtranscale_reg_value = 0x55ADDA3A; | |
3281 | break; | |
3282 | default: | |
3283 | return 0; | |
3284 | } | |
3285 | break; | |
bd60018a | 3286 | case DP_TRAIN_PRE_EMPH_LEVEL_2: |
e2fa6fba P |
3287 | preemph_reg_value = 0x0000000; |
3288 | switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { | |
bd60018a | 3289 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_0: |
e2fa6fba P |
3290 | demph_reg_value = 0x2B305555; |
3291 | uniqtranscale_reg_value = 0x5570B83A; | |
3292 | break; | |
bd60018a | 3293 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_1: |
e2fa6fba P |
3294 | demph_reg_value = 0x2B2B4040; |
3295 | uniqtranscale_reg_value = 0x55ADDA3A; | |
3296 | break; | |
3297 | default: | |
3298 | return 0; | |
3299 | } | |
3300 | break; | |
bd60018a | 3301 | case DP_TRAIN_PRE_EMPH_LEVEL_3: |
e2fa6fba P |
3302 | preemph_reg_value = 0x0006000; |
3303 | switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { | |
bd60018a | 3304 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_0: |
e2fa6fba P |
3305 | demph_reg_value = 0x1B405555; |
3306 | uniqtranscale_reg_value = 0x55ADDA3A; | |
3307 | break; | |
3308 | default: | |
3309 | return 0; | |
3310 | } | |
3311 | break; | |
3312 | default: | |
3313 | return 0; | |
3314 | } | |
3315 | ||
a580516d | 3316 | mutex_lock(&dev_priv->sb_lock); |
ab3c759a CML |
3317 | vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), 0x00000000); |
3318 | vlv_dpio_write(dev_priv, pipe, VLV_TX_DW4(port), demph_reg_value); | |
3319 | vlv_dpio_write(dev_priv, pipe, VLV_TX_DW2(port), | |
e2fa6fba | 3320 | uniqtranscale_reg_value); |
ab3c759a CML |
3321 | vlv_dpio_write(dev_priv, pipe, VLV_TX_DW3(port), 0x0C782040); |
3322 | vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW11(port), 0x00030000); | |
3323 | vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW9(port), preemph_reg_value); | |
3324 | vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), 0x80000000); | |
a580516d | 3325 | mutex_unlock(&dev_priv->sb_lock); |
e2fa6fba P |
3326 | |
3327 | return 0; | |
3328 | } | |
3329 | ||
67fa24b4 VS |
3330 | static bool chv_need_uniq_trans_scale(uint8_t train_set) |
3331 | { | |
3332 | return (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) == DP_TRAIN_PRE_EMPH_LEVEL_0 && | |
3333 | (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) == DP_TRAIN_VOLTAGE_SWING_LEVEL_3; | |
3334 | } | |
3335 | ||
5829975c | 3336 | static uint32_t chv_signal_levels(struct intel_dp *intel_dp) |
e4a1d846 CML |
3337 | { |
3338 | struct drm_device *dev = intel_dp_to_dev(intel_dp); | |
3339 | struct drm_i915_private *dev_priv = dev->dev_private; | |
3340 | struct intel_digital_port *dport = dp_to_dig_port(intel_dp); | |
3341 | struct intel_crtc *intel_crtc = to_intel_crtc(dport->base.base.crtc); | |
f72df8db | 3342 | u32 deemph_reg_value, margin_reg_value, val; |
e4a1d846 CML |
3343 | uint8_t train_set = intel_dp->train_set[0]; |
3344 | enum dpio_channel ch = vlv_dport_to_channel(dport); | |
f72df8db VS |
3345 | enum pipe pipe = intel_crtc->pipe; |
3346 | int i; | |
e4a1d846 CML |
3347 | |
3348 | switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) { | |
bd60018a | 3349 | case DP_TRAIN_PRE_EMPH_LEVEL_0: |
e4a1d846 | 3350 | switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { |
bd60018a | 3351 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_0: |
e4a1d846 CML |
3352 | deemph_reg_value = 128; |
3353 | margin_reg_value = 52; | |
3354 | break; | |
bd60018a | 3355 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_1: |
e4a1d846 CML |
3356 | deemph_reg_value = 128; |
3357 | margin_reg_value = 77; | |
3358 | break; | |
bd60018a | 3359 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_2: |
e4a1d846 CML |
3360 | deemph_reg_value = 128; |
3361 | margin_reg_value = 102; | |
3362 | break; | |
bd60018a | 3363 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_3: |
e4a1d846 CML |
3364 | deemph_reg_value = 128; |
3365 | margin_reg_value = 154; | |
3366 | /* FIXME extra to set for 1200 */ | |
3367 | break; | |
3368 | default: | |
3369 | return 0; | |
3370 | } | |
3371 | break; | |
bd60018a | 3372 | case DP_TRAIN_PRE_EMPH_LEVEL_1: |
e4a1d846 | 3373 | switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { |
bd60018a | 3374 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_0: |
e4a1d846 CML |
3375 | deemph_reg_value = 85; |
3376 | margin_reg_value = 78; | |
3377 | break; | |
bd60018a | 3378 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_1: |
e4a1d846 CML |
3379 | deemph_reg_value = 85; |
3380 | margin_reg_value = 116; | |
3381 | break; | |
bd60018a | 3382 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_2: |
e4a1d846 CML |
3383 | deemph_reg_value = 85; |
3384 | margin_reg_value = 154; | |
3385 | break; | |
3386 | default: | |
3387 | return 0; | |
3388 | } | |
3389 | break; | |
bd60018a | 3390 | case DP_TRAIN_PRE_EMPH_LEVEL_2: |
e4a1d846 | 3391 | switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { |
bd60018a | 3392 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_0: |
e4a1d846 CML |
3393 | deemph_reg_value = 64; |
3394 | margin_reg_value = 104; | |
3395 | break; | |
bd60018a | 3396 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_1: |
e4a1d846 CML |
3397 | deemph_reg_value = 64; |
3398 | margin_reg_value = 154; | |
3399 | break; | |
3400 | default: | |
3401 | return 0; | |
3402 | } | |
3403 | break; | |
bd60018a | 3404 | case DP_TRAIN_PRE_EMPH_LEVEL_3: |
e4a1d846 | 3405 | switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { |
bd60018a | 3406 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_0: |
e4a1d846 CML |
3407 | deemph_reg_value = 43; |
3408 | margin_reg_value = 154; | |
3409 | break; | |
3410 | default: | |
3411 | return 0; | |
3412 | } | |
3413 | break; | |
3414 | default: | |
3415 | return 0; | |
3416 | } | |
3417 | ||
a580516d | 3418 | mutex_lock(&dev_priv->sb_lock); |
e4a1d846 CML |
3419 | |
3420 | /* Clear calc init */ | |
1966e59e VS |
3421 | val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch)); |
3422 | val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3); | |
a02ef3c7 VS |
3423 | val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK); |
3424 | val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5; | |
1966e59e VS |
3425 | vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val); |
3426 | ||
e0fce78f VS |
3427 | if (intel_crtc->config->lane_count > 2) { |
3428 | val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch)); | |
3429 | val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3); | |
3430 | val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK); | |
3431 | val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5; | |
3432 | vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val); | |
3433 | } | |
e4a1d846 | 3434 | |
a02ef3c7 VS |
3435 | val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW9(ch)); |
3436 | val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK); | |
3437 | val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000; | |
3438 | vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW9(ch), val); | |
3439 | ||
e0fce78f VS |
3440 | if (intel_crtc->config->lane_count > 2) { |
3441 | val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW9(ch)); | |
3442 | val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK); | |
3443 | val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000; | |
3444 | vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW9(ch), val); | |
3445 | } | |
a02ef3c7 | 3446 | |
e4a1d846 | 3447 | /* Program swing deemph */ |
e0fce78f | 3448 | for (i = 0; i < intel_crtc->config->lane_count; i++) { |
f72df8db VS |
3449 | val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW4(ch, i)); |
3450 | val &= ~DPIO_SWING_DEEMPH9P5_MASK; | |
3451 | val |= deemph_reg_value << DPIO_SWING_DEEMPH9P5_SHIFT; | |
3452 | vlv_dpio_write(dev_priv, pipe, CHV_TX_DW4(ch, i), val); | |
3453 | } | |
e4a1d846 CML |
3454 | |
3455 | /* Program swing margin */ | |
e0fce78f | 3456 | for (i = 0; i < intel_crtc->config->lane_count; i++) { |
f72df8db | 3457 | val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i)); |
67fa24b4 | 3458 | |
1fb44505 VS |
3459 | val &= ~DPIO_SWING_MARGIN000_MASK; |
3460 | val |= margin_reg_value << DPIO_SWING_MARGIN000_SHIFT; | |
67fa24b4 VS |
3461 | |
3462 | /* | |
3463 | * Supposedly this value shouldn't matter when unique transition | |
3464 | * scale is disabled, but in fact it does matter. Let's just | |
3465 | * always program the same value and hope it's OK. | |
3466 | */ | |
3467 | val &= ~(0xff << DPIO_UNIQ_TRANS_SCALE_SHIFT); | |
3468 | val |= 0x9a << DPIO_UNIQ_TRANS_SCALE_SHIFT; | |
3469 | ||
f72df8db VS |
3470 | vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val); |
3471 | } | |
e4a1d846 | 3472 | |
67fa24b4 VS |
3473 | /* |
3474 | * The document said it needs to set bit 27 for ch0 and bit 26 | |
3475 | * for ch1. Might be a typo in the doc. | |
3476 | * For now, for this unique transition scale selection, set bit | |
3477 | * 27 for ch0 and ch1. | |
3478 | */ | |
e0fce78f | 3479 | for (i = 0; i < intel_crtc->config->lane_count; i++) { |
f72df8db | 3480 | val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW3(ch, i)); |
67fa24b4 | 3481 | if (chv_need_uniq_trans_scale(train_set)) |
f72df8db | 3482 | val |= DPIO_TX_UNIQ_TRANS_SCALE_EN; |
67fa24b4 VS |
3483 | else |
3484 | val &= ~DPIO_TX_UNIQ_TRANS_SCALE_EN; | |
3485 | vlv_dpio_write(dev_priv, pipe, CHV_TX_DW3(ch, i), val); | |
e4a1d846 CML |
3486 | } |
3487 | ||
3488 | /* Start swing calculation */ | |
1966e59e VS |
3489 | val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch)); |
3490 | val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3; | |
3491 | vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val); | |
3492 | ||
e0fce78f VS |
3493 | if (intel_crtc->config->lane_count > 2) { |
3494 | val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch)); | |
3495 | val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3; | |
3496 | vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val); | |
3497 | } | |
e4a1d846 | 3498 | |
a580516d | 3499 | mutex_unlock(&dev_priv->sb_lock); |
e4a1d846 CML |
3500 | |
3501 | return 0; | |
3502 | } | |
3503 | ||
a4fc5ed6 | 3504 | static uint32_t |
5829975c | 3505 | gen4_signal_levels(uint8_t train_set) |
a4fc5ed6 | 3506 | { |
3cf2efb1 | 3507 | uint32_t signal_levels = 0; |
a4fc5ed6 | 3508 | |
3cf2efb1 | 3509 | switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { |
bd60018a | 3510 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_0: |
a4fc5ed6 KP |
3511 | default: |
3512 | signal_levels |= DP_VOLTAGE_0_4; | |
3513 | break; | |
bd60018a | 3514 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_1: |
a4fc5ed6 KP |
3515 | signal_levels |= DP_VOLTAGE_0_6; |
3516 | break; | |
bd60018a | 3517 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_2: |
a4fc5ed6 KP |
3518 | signal_levels |= DP_VOLTAGE_0_8; |
3519 | break; | |
bd60018a | 3520 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_3: |
a4fc5ed6 KP |
3521 | signal_levels |= DP_VOLTAGE_1_2; |
3522 | break; | |
3523 | } | |
3cf2efb1 | 3524 | switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) { |
bd60018a | 3525 | case DP_TRAIN_PRE_EMPH_LEVEL_0: |
a4fc5ed6 KP |
3526 | default: |
3527 | signal_levels |= DP_PRE_EMPHASIS_0; | |
3528 | break; | |
bd60018a | 3529 | case DP_TRAIN_PRE_EMPH_LEVEL_1: |
a4fc5ed6 KP |
3530 | signal_levels |= DP_PRE_EMPHASIS_3_5; |
3531 | break; | |
bd60018a | 3532 | case DP_TRAIN_PRE_EMPH_LEVEL_2: |
a4fc5ed6 KP |
3533 | signal_levels |= DP_PRE_EMPHASIS_6; |
3534 | break; | |
bd60018a | 3535 | case DP_TRAIN_PRE_EMPH_LEVEL_3: |
a4fc5ed6 KP |
3536 | signal_levels |= DP_PRE_EMPHASIS_9_5; |
3537 | break; | |
3538 | } | |
3539 | return signal_levels; | |
3540 | } | |
3541 | ||
e3421a18 ZW |
3542 | /* Gen6's DP voltage swing and pre-emphasis control */ |
3543 | static uint32_t | |
5829975c | 3544 | gen6_edp_signal_levels(uint8_t train_set) |
e3421a18 | 3545 | { |
3c5a62b5 YL |
3546 | int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK | |
3547 | DP_TRAIN_PRE_EMPHASIS_MASK); | |
3548 | switch (signal_levels) { | |
bd60018a SJ |
3549 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_0: |
3550 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_0: | |
3c5a62b5 | 3551 | return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B; |
bd60018a | 3552 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_1: |
3c5a62b5 | 3553 | return EDP_LINK_TRAIN_400MV_3_5DB_SNB_B; |
bd60018a SJ |
3554 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_2: |
3555 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_2: | |
3c5a62b5 | 3556 | return EDP_LINK_TRAIN_400_600MV_6DB_SNB_B; |
bd60018a SJ |
3557 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_1: |
3558 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_1: | |
3c5a62b5 | 3559 | return EDP_LINK_TRAIN_600_800MV_3_5DB_SNB_B; |
bd60018a SJ |
3560 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_0: |
3561 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_3 | DP_TRAIN_PRE_EMPH_LEVEL_0: | |
3c5a62b5 | 3562 | return EDP_LINK_TRAIN_800_1200MV_0DB_SNB_B; |
e3421a18 | 3563 | default: |
3c5a62b5 YL |
3564 | DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:" |
3565 | "0x%x\n", signal_levels); | |
3566 | return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B; | |
e3421a18 ZW |
3567 | } |
3568 | } | |
3569 | ||
1a2eb460 KP |
3570 | /* Gen7's DP voltage swing and pre-emphasis control */ |
3571 | static uint32_t | |
5829975c | 3572 | gen7_edp_signal_levels(uint8_t train_set) |
1a2eb460 KP |
3573 | { |
3574 | int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK | | |
3575 | DP_TRAIN_PRE_EMPHASIS_MASK); | |
3576 | switch (signal_levels) { | |
bd60018a | 3577 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_0: |
1a2eb460 | 3578 | return EDP_LINK_TRAIN_400MV_0DB_IVB; |
bd60018a | 3579 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_1: |
1a2eb460 | 3580 | return EDP_LINK_TRAIN_400MV_3_5DB_IVB; |
bd60018a | 3581 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_2: |
1a2eb460 KP |
3582 | return EDP_LINK_TRAIN_400MV_6DB_IVB; |
3583 | ||
bd60018a | 3584 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_0: |
1a2eb460 | 3585 | return EDP_LINK_TRAIN_600MV_0DB_IVB; |
bd60018a | 3586 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_1: |
1a2eb460 KP |
3587 | return EDP_LINK_TRAIN_600MV_3_5DB_IVB; |
3588 | ||
bd60018a | 3589 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_0: |
1a2eb460 | 3590 | return EDP_LINK_TRAIN_800MV_0DB_IVB; |
bd60018a | 3591 | case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_1: |
1a2eb460 KP |
3592 | return EDP_LINK_TRAIN_800MV_3_5DB_IVB; |
3593 | ||
3594 | default: | |
3595 | DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:" | |
3596 | "0x%x\n", signal_levels); | |
3597 | return EDP_LINK_TRAIN_500MV_0DB_IVB; | |
3598 | } | |
3599 | } | |
3600 | ||
94223d04 | 3601 | void |
f4eb692e | 3602 | intel_dp_set_signal_levels(struct intel_dp *intel_dp) |
f0a3424e PZ |
3603 | { |
3604 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); | |
bc7d38a4 | 3605 | enum port port = intel_dig_port->port; |
f0a3424e | 3606 | struct drm_device *dev = intel_dig_port->base.base.dev; |
b905a915 | 3607 | struct drm_i915_private *dev_priv = to_i915(dev); |
f8896f5d | 3608 | uint32_t signal_levels, mask = 0; |
f0a3424e PZ |
3609 | uint8_t train_set = intel_dp->train_set[0]; |
3610 | ||
f8896f5d DW |
3611 | if (HAS_DDI(dev)) { |
3612 | signal_levels = ddi_signal_levels(intel_dp); | |
3613 | ||
3614 | if (IS_BROXTON(dev)) | |
3615 | signal_levels = 0; | |
3616 | else | |
3617 | mask = DDI_BUF_EMP_MASK; | |
e4a1d846 | 3618 | } else if (IS_CHERRYVIEW(dev)) { |
5829975c | 3619 | signal_levels = chv_signal_levels(intel_dp); |
e2fa6fba | 3620 | } else if (IS_VALLEYVIEW(dev)) { |
5829975c | 3621 | signal_levels = vlv_signal_levels(intel_dp); |
bc7d38a4 | 3622 | } else if (IS_GEN7(dev) && port == PORT_A) { |
5829975c | 3623 | signal_levels = gen7_edp_signal_levels(train_set); |
f0a3424e | 3624 | mask = EDP_LINK_TRAIN_VOL_EMP_MASK_IVB; |
bc7d38a4 | 3625 | } else if (IS_GEN6(dev) && port == PORT_A) { |
5829975c | 3626 | signal_levels = gen6_edp_signal_levels(train_set); |
f0a3424e PZ |
3627 | mask = EDP_LINK_TRAIN_VOL_EMP_MASK_SNB; |
3628 | } else { | |
5829975c | 3629 | signal_levels = gen4_signal_levels(train_set); |
f0a3424e PZ |
3630 | mask = DP_VOLTAGE_MASK | DP_PRE_EMPHASIS_MASK; |
3631 | } | |
3632 | ||
96fb9f9b VK |
3633 | if (mask) |
3634 | DRM_DEBUG_KMS("Using signal levels %08x\n", signal_levels); | |
3635 | ||
3636 | DRM_DEBUG_KMS("Using vswing level %d\n", | |
3637 | train_set & DP_TRAIN_VOLTAGE_SWING_MASK); | |
3638 | DRM_DEBUG_KMS("Using pre-emphasis level %d\n", | |
3639 | (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) >> | |
3640 | DP_TRAIN_PRE_EMPHASIS_SHIFT); | |
f0a3424e | 3641 | |
f4eb692e | 3642 | intel_dp->DP = (intel_dp->DP & ~mask) | signal_levels; |
b905a915 ACO |
3643 | |
3644 | I915_WRITE(intel_dp->output_reg, intel_dp->DP); | |
3645 | POSTING_READ(intel_dp->output_reg); | |
f0a3424e PZ |
3646 | } |
3647 | ||
94223d04 | 3648 | void |
e9c176d5 ACO |
3649 | intel_dp_program_link_training_pattern(struct intel_dp *intel_dp, |
3650 | uint8_t dp_train_pat) | |
a4fc5ed6 | 3651 | { |
174edf1f | 3652 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
90a6b7b0 VS |
3653 | struct drm_i915_private *dev_priv = |
3654 | to_i915(intel_dig_port->base.base.dev); | |
a4fc5ed6 | 3655 | |
f4eb692e | 3656 | _intel_dp_set_link_train(intel_dp, &intel_dp->DP, dp_train_pat); |
47ea7542 | 3657 | |
f4eb692e | 3658 | I915_WRITE(intel_dp->output_reg, intel_dp->DP); |
ea5b213a | 3659 | POSTING_READ(intel_dp->output_reg); |
e9c176d5 ACO |
3660 | } |
3661 | ||
94223d04 | 3662 | void intel_dp_set_idle_link_train(struct intel_dp *intel_dp) |
3ab9c637 ID |
3663 | { |
3664 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); | |
3665 | struct drm_device *dev = intel_dig_port->base.base.dev; | |
3666 | struct drm_i915_private *dev_priv = dev->dev_private; | |
3667 | enum port port = intel_dig_port->port; | |
3668 | uint32_t val; | |
3669 | ||
3670 | if (!HAS_DDI(dev)) | |
3671 | return; | |
3672 | ||
3673 | val = I915_READ(DP_TP_CTL(port)); | |
3674 | val &= ~DP_TP_CTL_LINK_TRAIN_MASK; | |
3675 | val |= DP_TP_CTL_LINK_TRAIN_IDLE; | |
3676 | I915_WRITE(DP_TP_CTL(port), val); | |
3677 | ||
3678 | /* | |
3679 | * On PORT_A we can have only eDP in SST mode. There the only reason | |
3680 | * we need to set idle transmission mode is to work around a HW issue | |
3681 | * where we enable the pipe while not in idle link-training mode. | |
3682 | * In this case there is requirement to wait for a minimum number of | |
3683 | * idle patterns to be sent. | |
3684 | */ | |
3685 | if (port == PORT_A) | |
3686 | return; | |
3687 | ||
3688 | if (wait_for((I915_READ(DP_TP_STATUS(port)) & DP_TP_STATUS_IDLE_DONE), | |
3689 | 1)) | |
3690 | DRM_ERROR("Timed out waiting for DP idle patterns\n"); | |
3691 | } | |
3692 | ||
a4fc5ed6 | 3693 | static void |
ea5b213a | 3694 | intel_dp_link_down(struct intel_dp *intel_dp) |
a4fc5ed6 | 3695 | { |
da63a9f2 | 3696 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
1612c8bd | 3697 | struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc); |
bc7d38a4 | 3698 | enum port port = intel_dig_port->port; |
da63a9f2 | 3699 | struct drm_device *dev = intel_dig_port->base.base.dev; |
a4fc5ed6 | 3700 | struct drm_i915_private *dev_priv = dev->dev_private; |
ea5b213a | 3701 | uint32_t DP = intel_dp->DP; |
a4fc5ed6 | 3702 | |
bc76e320 | 3703 | if (WARN_ON(HAS_DDI(dev))) |
c19b0669 PZ |
3704 | return; |
3705 | ||
0c33d8d7 | 3706 | if (WARN_ON((I915_READ(intel_dp->output_reg) & DP_PORT_EN) == 0)) |
1b39d6f3 CW |
3707 | return; |
3708 | ||
28c97730 | 3709 | DRM_DEBUG_KMS("\n"); |
32f9d658 | 3710 | |
39e5fa88 VS |
3711 | if ((IS_GEN7(dev) && port == PORT_A) || |
3712 | (HAS_PCH_CPT(dev) && port != PORT_A)) { | |
e3421a18 | 3713 | DP &= ~DP_LINK_TRAIN_MASK_CPT; |
1612c8bd | 3714 | DP |= DP_LINK_TRAIN_PAT_IDLE_CPT; |
e3421a18 | 3715 | } else { |
aad3d14d VS |
3716 | if (IS_CHERRYVIEW(dev)) |
3717 | DP &= ~DP_LINK_TRAIN_MASK_CHV; | |
3718 | else | |
3719 | DP &= ~DP_LINK_TRAIN_MASK; | |
1612c8bd | 3720 | DP |= DP_LINK_TRAIN_PAT_IDLE; |
e3421a18 | 3721 | } |
1612c8bd | 3722 | I915_WRITE(intel_dp->output_reg, DP); |
fe255d00 | 3723 | POSTING_READ(intel_dp->output_reg); |
5eb08b69 | 3724 | |
1612c8bd VS |
3725 | DP &= ~(DP_PORT_EN | DP_AUDIO_OUTPUT_ENABLE); |
3726 | I915_WRITE(intel_dp->output_reg, DP); | |
3727 | POSTING_READ(intel_dp->output_reg); | |
3728 | ||
3729 | /* | |
3730 | * HW workaround for IBX, we need to move the port | |
3731 | * to transcoder A after disabling it to allow the | |
3732 | * matching HDMI port to be enabled on transcoder A. | |
3733 | */ | |
3734 | if (HAS_PCH_IBX(dev) && crtc->pipe == PIPE_B && port != PORT_A) { | |
0c241d5b VS |
3735 | /* |
3736 | * We get CPU/PCH FIFO underruns on the other pipe when | |
3737 | * doing the workaround. Sweep them under the rug. | |
3738 | */ | |
3739 | intel_set_cpu_fifo_underrun_reporting(dev_priv, PIPE_A, false); | |
3740 | intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, false); | |
3741 | ||
1612c8bd VS |
3742 | /* always enable with pattern 1 (as per spec) */ |
3743 | DP &= ~(DP_PIPEB_SELECT | DP_LINK_TRAIN_MASK); | |
3744 | DP |= DP_PORT_EN | DP_LINK_TRAIN_PAT_1; | |
3745 | I915_WRITE(intel_dp->output_reg, DP); | |
3746 | POSTING_READ(intel_dp->output_reg); | |
3747 | ||
3748 | DP &= ~DP_PORT_EN; | |
5bddd17f | 3749 | I915_WRITE(intel_dp->output_reg, DP); |
0ca09685 | 3750 | POSTING_READ(intel_dp->output_reg); |
0c241d5b VS |
3751 | |
3752 | intel_wait_for_vblank_if_active(dev_priv->dev, PIPE_A); | |
3753 | intel_set_cpu_fifo_underrun_reporting(dev_priv, PIPE_A, true); | |
3754 | intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, true); | |
5bddd17f EA |
3755 | } |
3756 | ||
f01eca2e | 3757 | msleep(intel_dp->panel_power_down_delay); |
6fec7662 VS |
3758 | |
3759 | intel_dp->DP = DP; | |
a4fc5ed6 KP |
3760 | } |
3761 | ||
26d61aad KP |
3762 | static bool |
3763 | intel_dp_get_dpcd(struct intel_dp *intel_dp) | |
92fd8fd1 | 3764 | { |
a031d709 RV |
3765 | struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
3766 | struct drm_device *dev = dig_port->base.base.dev; | |
3767 | struct drm_i915_private *dev_priv = dev->dev_private; | |
fc0f8e25 | 3768 | uint8_t rev; |
a031d709 | 3769 | |
9d1a1031 JN |
3770 | if (intel_dp_dpcd_read_wake(&intel_dp->aux, 0x000, intel_dp->dpcd, |
3771 | sizeof(intel_dp->dpcd)) < 0) | |
edb39244 | 3772 | return false; /* aux transfer failed */ |
92fd8fd1 | 3773 | |
a8e98153 | 3774 | DRM_DEBUG_KMS("DPCD: %*ph\n", (int) sizeof(intel_dp->dpcd), intel_dp->dpcd); |
577c7a50 | 3775 | |
edb39244 AJ |
3776 | if (intel_dp->dpcd[DP_DPCD_REV] == 0) |
3777 | return false; /* DPCD not present */ | |
3778 | ||
30d9aa42 SS |
3779 | if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_SINK_COUNT, |
3780 | &intel_dp->sink_count, 1) < 0) | |
3781 | return false; | |
3782 | ||
3783 | /* | |
3784 | * Sink count can change between short pulse hpd hence | |
3785 | * a member variable in intel_dp will track any changes | |
3786 | * between short pulse interrupts. | |
3787 | */ | |
3788 | intel_dp->sink_count = DP_GET_SINK_COUNT(intel_dp->sink_count); | |
3789 | ||
3790 | /* | |
3791 | * SINK_COUNT == 0 and DOWNSTREAM_PORT_PRESENT == 1 implies that | |
3792 | * a dongle is present but no display. Unless we require to know | |
3793 | * if a dongle is present or not, we don't need to update | |
3794 | * downstream port information. So, an early return here saves | |
3795 | * time from performing other operations which are not required. | |
3796 | */ | |
3797 | if (!intel_dp->sink_count) | |
3798 | return false; | |
3799 | ||
2293bb5c SK |
3800 | /* Check if the panel supports PSR */ |
3801 | memset(intel_dp->psr_dpcd, 0, sizeof(intel_dp->psr_dpcd)); | |
50003939 | 3802 | if (is_edp(intel_dp)) { |
9d1a1031 JN |
3803 | intel_dp_dpcd_read_wake(&intel_dp->aux, DP_PSR_SUPPORT, |
3804 | intel_dp->psr_dpcd, | |
3805 | sizeof(intel_dp->psr_dpcd)); | |
a031d709 RV |
3806 | if (intel_dp->psr_dpcd[0] & DP_PSR_IS_SUPPORTED) { |
3807 | dev_priv->psr.sink_support = true; | |
50003939 | 3808 | DRM_DEBUG_KMS("Detected EDP PSR Panel.\n"); |
a031d709 | 3809 | } |
474d1ec4 SJ |
3810 | |
3811 | if (INTEL_INFO(dev)->gen >= 9 && | |
3812 | (intel_dp->psr_dpcd[0] & DP_PSR2_IS_SUPPORTED)) { | |
3813 | uint8_t frame_sync_cap; | |
3814 | ||
3815 | dev_priv->psr.sink_support = true; | |
3816 | intel_dp_dpcd_read_wake(&intel_dp->aux, | |
3817 | DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP, | |
3818 | &frame_sync_cap, 1); | |
3819 | dev_priv->psr.aux_frame_sync = frame_sync_cap ? true : false; | |
3820 | /* PSR2 needs frame sync as well */ | |
3821 | dev_priv->psr.psr2_support = dev_priv->psr.aux_frame_sync; | |
3822 | DRM_DEBUG_KMS("PSR2 %s on sink", | |
3823 | dev_priv->psr.psr2_support ? "supported" : "not supported"); | |
3824 | } | |
50003939 JN |
3825 | } |
3826 | ||
bc5133d5 | 3827 | DRM_DEBUG_KMS("Display Port TPS3 support: source %s, sink %s\n", |
e588fa18 | 3828 | yesno(intel_dp_source_supports_hbr2(intel_dp)), |
742f491d | 3829 | yesno(drm_dp_tps3_supported(intel_dp->dpcd))); |
06ea66b6 | 3830 | |
fc0f8e25 SJ |
3831 | /* Intermediate frequency support */ |
3832 | if (is_edp(intel_dp) && | |
3833 | (intel_dp->dpcd[DP_EDP_CONFIGURATION_CAP] & DP_DPCD_DISPLAY_CONTROL_CAPABLE) && | |
3834 | (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_EDP_DPCD_REV, &rev, 1) == 1) && | |
3835 | (rev >= 0x03)) { /* eDp v1.4 or higher */ | |
94ca719e | 3836 | __le16 sink_rates[DP_MAX_SUPPORTED_RATES]; |
ea2d8a42 VS |
3837 | int i; |
3838 | ||
fc0f8e25 SJ |
3839 | intel_dp_dpcd_read_wake(&intel_dp->aux, |
3840 | DP_SUPPORTED_LINK_RATES, | |
94ca719e VS |
3841 | sink_rates, |
3842 | sizeof(sink_rates)); | |
ea2d8a42 | 3843 | |
94ca719e VS |
3844 | for (i = 0; i < ARRAY_SIZE(sink_rates); i++) { |
3845 | int val = le16_to_cpu(sink_rates[i]); | |
ea2d8a42 VS |
3846 | |
3847 | if (val == 0) | |
3848 | break; | |
3849 | ||
af77b974 SJ |
3850 | /* Value read is in kHz while drm clock is saved in deca-kHz */ |
3851 | intel_dp->sink_rates[i] = (val * 200) / 10; | |
ea2d8a42 | 3852 | } |
94ca719e | 3853 | intel_dp->num_sink_rates = i; |
fc0f8e25 | 3854 | } |
0336400e VS |
3855 | |
3856 | intel_dp_print_rates(intel_dp); | |
3857 | ||
edb39244 AJ |
3858 | if (!(intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] & |
3859 | DP_DWN_STRM_PORT_PRESENT)) | |
3860 | return true; /* native DP sink */ | |
3861 | ||
3862 | if (intel_dp->dpcd[DP_DPCD_REV] == 0x10) | |
3863 | return true; /* no per-port downstream info */ | |
3864 | ||
9d1a1031 JN |
3865 | if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_DOWNSTREAM_PORT_0, |
3866 | intel_dp->downstream_ports, | |
3867 | DP_MAX_DOWNSTREAM_PORTS) < 0) | |
edb39244 AJ |
3868 | return false; /* downstream port status fetch failed */ |
3869 | ||
3870 | return true; | |
92fd8fd1 KP |
3871 | } |
3872 | ||
0d198328 AJ |
3873 | static void |
3874 | intel_dp_probe_oui(struct intel_dp *intel_dp) | |
3875 | { | |
3876 | u8 buf[3]; | |
3877 | ||
3878 | if (!(intel_dp->dpcd[DP_DOWN_STREAM_PORT_COUNT] & DP_OUI_SUPPORT)) | |
3879 | return; | |
3880 | ||
9d1a1031 | 3881 | if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_SINK_OUI, buf, 3) == 3) |
0d198328 AJ |
3882 | DRM_DEBUG_KMS("Sink OUI: %02hx%02hx%02hx\n", |
3883 | buf[0], buf[1], buf[2]); | |
3884 | ||
9d1a1031 | 3885 | if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_BRANCH_OUI, buf, 3) == 3) |
0d198328 AJ |
3886 | DRM_DEBUG_KMS("Branch OUI: %02hx%02hx%02hx\n", |
3887 | buf[0], buf[1], buf[2]); | |
3888 | } | |
3889 | ||
0e32b39c DA |
3890 | static bool |
3891 | intel_dp_probe_mst(struct intel_dp *intel_dp) | |
3892 | { | |
3893 | u8 buf[1]; | |
3894 | ||
7cc96139 NS |
3895 | if (!i915.enable_dp_mst) |
3896 | return false; | |
3897 | ||
0e32b39c DA |
3898 | if (!intel_dp->can_mst) |
3899 | return false; | |
3900 | ||
3901 | if (intel_dp->dpcd[DP_DPCD_REV] < 0x12) | |
3902 | return false; | |
3903 | ||
0e32b39c DA |
3904 | if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_MSTM_CAP, buf, 1)) { |
3905 | if (buf[0] & DP_MST_CAP) { | |
3906 | DRM_DEBUG_KMS("Sink is MST capable\n"); | |
3907 | intel_dp->is_mst = true; | |
3908 | } else { | |
3909 | DRM_DEBUG_KMS("Sink is not MST capable\n"); | |
3910 | intel_dp->is_mst = false; | |
3911 | } | |
3912 | } | |
0e32b39c DA |
3913 | |
3914 | drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr, intel_dp->is_mst); | |
3915 | return intel_dp->is_mst; | |
3916 | } | |
3917 | ||
e5a1cab5 | 3918 | static int intel_dp_sink_crc_stop(struct intel_dp *intel_dp) |
d2e216d0 | 3919 | { |
082dcc7c | 3920 | struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
d72f9d91 | 3921 | struct drm_device *dev = dig_port->base.base.dev; |
082dcc7c | 3922 | struct intel_crtc *intel_crtc = to_intel_crtc(dig_port->base.base.crtc); |
ad9dc91b | 3923 | u8 buf; |
e5a1cab5 | 3924 | int ret = 0; |
c6297843 RV |
3925 | int count = 0; |
3926 | int attempts = 10; | |
d2e216d0 | 3927 | |
082dcc7c RV |
3928 | if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK, &buf) < 0) { |
3929 | DRM_DEBUG_KMS("Sink CRC couldn't be stopped properly\n"); | |
e5a1cab5 RV |
3930 | ret = -EIO; |
3931 | goto out; | |
4373f0f2 PZ |
3932 | } |
3933 | ||
082dcc7c | 3934 | if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_SINK, |
e5a1cab5 | 3935 | buf & ~DP_TEST_SINK_START) < 0) { |
082dcc7c | 3936 | DRM_DEBUG_KMS("Sink CRC couldn't be stopped properly\n"); |
e5a1cab5 RV |
3937 | ret = -EIO; |
3938 | goto out; | |
3939 | } | |
d2e216d0 | 3940 | |
c6297843 RV |
3941 | do { |
3942 | intel_wait_for_vblank(dev, intel_crtc->pipe); | |
3943 | ||
3944 | if (drm_dp_dpcd_readb(&intel_dp->aux, | |
3945 | DP_TEST_SINK_MISC, &buf) < 0) { | |
3946 | ret = -EIO; | |
3947 | goto out; | |
3948 | } | |
3949 | count = buf & DP_TEST_COUNT_MASK; | |
3950 | } while (--attempts && count); | |
3951 | ||
3952 | if (attempts == 0) { | |
dc5a9037 | 3953 | DRM_DEBUG_KMS("TIMEOUT: Sink CRC counter is not zeroed after calculation is stopped\n"); |
c6297843 RV |
3954 | ret = -ETIMEDOUT; |
3955 | } | |
3956 | ||
e5a1cab5 | 3957 | out: |
082dcc7c | 3958 | hsw_enable_ips(intel_crtc); |
e5a1cab5 | 3959 | return ret; |
082dcc7c RV |
3960 | } |
3961 | ||
3962 | static int intel_dp_sink_crc_start(struct intel_dp *intel_dp) | |
3963 | { | |
3964 | struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); | |
d72f9d91 | 3965 | struct drm_device *dev = dig_port->base.base.dev; |
082dcc7c RV |
3966 | struct intel_crtc *intel_crtc = to_intel_crtc(dig_port->base.base.crtc); |
3967 | u8 buf; | |
e5a1cab5 RV |
3968 | int ret; |
3969 | ||
082dcc7c RV |
3970 | if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK_MISC, &buf) < 0) |
3971 | return -EIO; | |
3972 | ||
3973 | if (!(buf & DP_TEST_CRC_SUPPORTED)) | |
3974 | return -ENOTTY; | |
3975 | ||
3976 | if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK, &buf) < 0) | |
3977 | return -EIO; | |
3978 | ||
6d8175da RV |
3979 | if (buf & DP_TEST_SINK_START) { |
3980 | ret = intel_dp_sink_crc_stop(intel_dp); | |
3981 | if (ret) | |
3982 | return ret; | |
3983 | } | |
3984 | ||
082dcc7c | 3985 | hsw_disable_ips(intel_crtc); |
1dda5f93 | 3986 | |
9d1a1031 | 3987 | if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_SINK, |
082dcc7c RV |
3988 | buf | DP_TEST_SINK_START) < 0) { |
3989 | hsw_enable_ips(intel_crtc); | |
3990 | return -EIO; | |
4373f0f2 PZ |
3991 | } |
3992 | ||
d72f9d91 | 3993 | intel_wait_for_vblank(dev, intel_crtc->pipe); |
082dcc7c RV |
3994 | return 0; |
3995 | } | |
3996 | ||
3997 | int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc) | |
3998 | { | |
3999 | struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); | |
4000 | struct drm_device *dev = dig_port->base.base.dev; | |
4001 | struct intel_crtc *intel_crtc = to_intel_crtc(dig_port->base.base.crtc); | |
4002 | u8 buf; | |
621d4c76 | 4003 | int count, ret; |
082dcc7c | 4004 | int attempts = 6; |
082dcc7c RV |
4005 | |
4006 | ret = intel_dp_sink_crc_start(intel_dp); | |
4007 | if (ret) | |
4008 | return ret; | |
4009 | ||
ad9dc91b | 4010 | do { |
621d4c76 RV |
4011 | intel_wait_for_vblank(dev, intel_crtc->pipe); |
4012 | ||
1dda5f93 | 4013 | if (drm_dp_dpcd_readb(&intel_dp->aux, |
4373f0f2 PZ |
4014 | DP_TEST_SINK_MISC, &buf) < 0) { |
4015 | ret = -EIO; | |
afe0d67e | 4016 | goto stop; |
4373f0f2 | 4017 | } |
621d4c76 | 4018 | count = buf & DP_TEST_COUNT_MASK; |
aabc95dc | 4019 | |
7e38eeff | 4020 | } while (--attempts && count == 0); |
ad9dc91b RV |
4021 | |
4022 | if (attempts == 0) { | |
7e38eeff RV |
4023 | DRM_ERROR("Panel is unable to calculate any CRC after 6 vblanks\n"); |
4024 | ret = -ETIMEDOUT; | |
4025 | goto stop; | |
4026 | } | |
4027 | ||
4028 | if (drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_CRC_R_CR, crc, 6) < 0) { | |
4029 | ret = -EIO; | |
4030 | goto stop; | |
ad9dc91b | 4031 | } |
d2e216d0 | 4032 | |
afe0d67e | 4033 | stop: |
082dcc7c | 4034 | intel_dp_sink_crc_stop(intel_dp); |
4373f0f2 | 4035 | return ret; |
d2e216d0 RV |
4036 | } |
4037 | ||
a60f0e38 JB |
4038 | static bool |
4039 | intel_dp_get_sink_irq(struct intel_dp *intel_dp, u8 *sink_irq_vector) | |
4040 | { | |
9d1a1031 JN |
4041 | return intel_dp_dpcd_read_wake(&intel_dp->aux, |
4042 | DP_DEVICE_SERVICE_IRQ_VECTOR, | |
4043 | sink_irq_vector, 1) == 1; | |
a60f0e38 JB |
4044 | } |
4045 | ||
0e32b39c DA |
4046 | static bool |
4047 | intel_dp_get_sink_irq_esi(struct intel_dp *intel_dp, u8 *sink_irq_vector) | |
4048 | { | |
4049 | int ret; | |
4050 | ||
4051 | ret = intel_dp_dpcd_read_wake(&intel_dp->aux, | |
4052 | DP_SINK_COUNT_ESI, | |
4053 | sink_irq_vector, 14); | |
4054 | if (ret != 14) | |
4055 | return false; | |
4056 | ||
4057 | return true; | |
4058 | } | |
4059 | ||
c5d5ab7a TP |
4060 | static uint8_t intel_dp_autotest_link_training(struct intel_dp *intel_dp) |
4061 | { | |
4062 | uint8_t test_result = DP_TEST_ACK; | |
4063 | return test_result; | |
4064 | } | |
4065 | ||
4066 | static uint8_t intel_dp_autotest_video_pattern(struct intel_dp *intel_dp) | |
4067 | { | |
4068 | uint8_t test_result = DP_TEST_NAK; | |
4069 | return test_result; | |
4070 | } | |
4071 | ||
4072 | static uint8_t intel_dp_autotest_edid(struct intel_dp *intel_dp) | |
a60f0e38 | 4073 | { |
c5d5ab7a | 4074 | uint8_t test_result = DP_TEST_NAK; |
559be30c TP |
4075 | struct intel_connector *intel_connector = intel_dp->attached_connector; |
4076 | struct drm_connector *connector = &intel_connector->base; | |
4077 | ||
4078 | if (intel_connector->detect_edid == NULL || | |
ac6f2e29 | 4079 | connector->edid_corrupt || |
559be30c TP |
4080 | intel_dp->aux.i2c_defer_count > 6) { |
4081 | /* Check EDID read for NACKs, DEFERs and corruption | |
4082 | * (DP CTS 1.2 Core r1.1) | |
4083 | * 4.2.2.4 : Failed EDID read, I2C_NAK | |
4084 | * 4.2.2.5 : Failed EDID read, I2C_DEFER | |
4085 | * 4.2.2.6 : EDID corruption detected | |
4086 | * Use failsafe mode for all cases | |
4087 | */ | |
4088 | if (intel_dp->aux.i2c_nack_count > 0 || | |
4089 | intel_dp->aux.i2c_defer_count > 0) | |
4090 | DRM_DEBUG_KMS("EDID read had %d NACKs, %d DEFERs\n", | |
4091 | intel_dp->aux.i2c_nack_count, | |
4092 | intel_dp->aux.i2c_defer_count); | |
4093 | intel_dp->compliance_test_data = INTEL_DP_RESOLUTION_FAILSAFE; | |
4094 | } else { | |
f79b468e TS |
4095 | struct edid *block = intel_connector->detect_edid; |
4096 | ||
4097 | /* We have to write the checksum | |
4098 | * of the last block read | |
4099 | */ | |
4100 | block += intel_connector->detect_edid->extensions; | |
4101 | ||
559be30c TP |
4102 | if (!drm_dp_dpcd_write(&intel_dp->aux, |
4103 | DP_TEST_EDID_CHECKSUM, | |
f79b468e | 4104 | &block->checksum, |
5a1cc655 | 4105 | 1)) |
559be30c TP |
4106 | DRM_DEBUG_KMS("Failed to write EDID checksum\n"); |
4107 | ||
4108 | test_result = DP_TEST_ACK | DP_TEST_EDID_CHECKSUM_WRITE; | |
4109 | intel_dp->compliance_test_data = INTEL_DP_RESOLUTION_STANDARD; | |
4110 | } | |
4111 | ||
4112 | /* Set test active flag here so userspace doesn't interrupt things */ | |
4113 | intel_dp->compliance_test_active = 1; | |
4114 | ||
c5d5ab7a TP |
4115 | return test_result; |
4116 | } | |
4117 | ||
4118 | static uint8_t intel_dp_autotest_phy_pattern(struct intel_dp *intel_dp) | |
a60f0e38 | 4119 | { |
c5d5ab7a TP |
4120 | uint8_t test_result = DP_TEST_NAK; |
4121 | return test_result; | |
4122 | } | |
4123 | ||
4124 | static void intel_dp_handle_test_request(struct intel_dp *intel_dp) | |
4125 | { | |
4126 | uint8_t response = DP_TEST_NAK; | |
4127 | uint8_t rxdata = 0; | |
4128 | int status = 0; | |
4129 | ||
c5d5ab7a TP |
4130 | status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_REQUEST, &rxdata, 1); |
4131 | if (status <= 0) { | |
4132 | DRM_DEBUG_KMS("Could not read test request from sink\n"); | |
4133 | goto update_status; | |
4134 | } | |
4135 | ||
4136 | switch (rxdata) { | |
4137 | case DP_TEST_LINK_TRAINING: | |
4138 | DRM_DEBUG_KMS("LINK_TRAINING test requested\n"); | |
4139 | intel_dp->compliance_test_type = DP_TEST_LINK_TRAINING; | |
4140 | response = intel_dp_autotest_link_training(intel_dp); | |
4141 | break; | |
4142 | case DP_TEST_LINK_VIDEO_PATTERN: | |
4143 | DRM_DEBUG_KMS("TEST_PATTERN test requested\n"); | |
4144 | intel_dp->compliance_test_type = DP_TEST_LINK_VIDEO_PATTERN; | |
4145 | response = intel_dp_autotest_video_pattern(intel_dp); | |
4146 | break; | |
4147 | case DP_TEST_LINK_EDID_READ: | |
4148 | DRM_DEBUG_KMS("EDID test requested\n"); | |
4149 | intel_dp->compliance_test_type = DP_TEST_LINK_EDID_READ; | |
4150 | response = intel_dp_autotest_edid(intel_dp); | |
4151 | break; | |
4152 | case DP_TEST_LINK_PHY_TEST_PATTERN: | |
4153 | DRM_DEBUG_KMS("PHY_PATTERN test requested\n"); | |
4154 | intel_dp->compliance_test_type = DP_TEST_LINK_PHY_TEST_PATTERN; | |
4155 | response = intel_dp_autotest_phy_pattern(intel_dp); | |
4156 | break; | |
4157 | default: | |
4158 | DRM_DEBUG_KMS("Invalid test request '%02x'\n", rxdata); | |
4159 | break; | |
4160 | } | |
4161 | ||
4162 | update_status: | |
4163 | status = drm_dp_dpcd_write(&intel_dp->aux, | |
4164 | DP_TEST_RESPONSE, | |
4165 | &response, 1); | |
4166 | if (status <= 0) | |
4167 | DRM_DEBUG_KMS("Could not write test response to sink\n"); | |
a60f0e38 JB |
4168 | } |
4169 | ||
0e32b39c DA |
4170 | static int |
4171 | intel_dp_check_mst_status(struct intel_dp *intel_dp) | |
4172 | { | |
4173 | bool bret; | |
4174 | ||
4175 | if (intel_dp->is_mst) { | |
4176 | u8 esi[16] = { 0 }; | |
4177 | int ret = 0; | |
4178 | int retry; | |
4179 | bool handled; | |
4180 | bret = intel_dp_get_sink_irq_esi(intel_dp, esi); | |
4181 | go_again: | |
4182 | if (bret == true) { | |
4183 | ||
4184 | /* check link status - esi[10] = 0x200c */ | |
90a6b7b0 | 4185 | if (intel_dp->active_mst_links && |
901c2daf | 4186 | !drm_dp_channel_eq_ok(&esi[10], intel_dp->lane_count)) { |
0e32b39c DA |
4187 | DRM_DEBUG_KMS("channel EQ not ok, retraining\n"); |
4188 | intel_dp_start_link_train(intel_dp); | |
0e32b39c DA |
4189 | intel_dp_stop_link_train(intel_dp); |
4190 | } | |
4191 | ||
6f34cc39 | 4192 | DRM_DEBUG_KMS("got esi %3ph\n", esi); |
0e32b39c DA |
4193 | ret = drm_dp_mst_hpd_irq(&intel_dp->mst_mgr, esi, &handled); |
4194 | ||
4195 | if (handled) { | |
4196 | for (retry = 0; retry < 3; retry++) { | |
4197 | int wret; | |
4198 | wret = drm_dp_dpcd_write(&intel_dp->aux, | |
4199 | DP_SINK_COUNT_ESI+1, | |
4200 | &esi[1], 3); | |
4201 | if (wret == 3) { | |
4202 | break; | |
4203 | } | |
4204 | } | |
4205 | ||
4206 | bret = intel_dp_get_sink_irq_esi(intel_dp, esi); | |
4207 | if (bret == true) { | |
6f34cc39 | 4208 | DRM_DEBUG_KMS("got esi2 %3ph\n", esi); |
0e32b39c DA |
4209 | goto go_again; |
4210 | } | |
4211 | } else | |
4212 | ret = 0; | |
4213 | ||
4214 | return ret; | |
4215 | } else { | |
4216 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); | |
4217 | DRM_DEBUG_KMS("failed to get ESI - device may have failed\n"); | |
4218 | intel_dp->is_mst = false; | |
4219 | drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr, intel_dp->is_mst); | |
4220 | /* send a hotplug event */ | |
4221 | drm_kms_helper_hotplug_event(intel_dig_port->base.base.dev); | |
4222 | } | |
4223 | } | |
4224 | return -EINVAL; | |
4225 | } | |
4226 | ||
5c9114d0 SS |
4227 | static void |
4228 | intel_dp_check_link_status(struct intel_dp *intel_dp) | |
4229 | { | |
4230 | struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base; | |
4231 | struct drm_device *dev = intel_dp_to_dev(intel_dp); | |
4232 | u8 link_status[DP_LINK_STATUS_SIZE]; | |
4233 | ||
4234 | WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex)); | |
4235 | ||
4236 | if (!intel_dp_get_link_status(intel_dp, link_status)) { | |
4237 | DRM_ERROR("Failed to get link status\n"); | |
4238 | return; | |
4239 | } | |
4240 | ||
4241 | if (!intel_encoder->base.crtc) | |
4242 | return; | |
4243 | ||
4244 | if (!to_intel_crtc(intel_encoder->base.crtc)->active) | |
4245 | return; | |
4246 | ||
4247 | /* if link training is requested we should perform it always */ | |
4248 | if ((intel_dp->compliance_test_type == DP_TEST_LINK_TRAINING) || | |
4249 | (!drm_dp_channel_eq_ok(link_status, intel_dp->lane_count))) { | |
4250 | DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n", | |
4251 | intel_encoder->base.name); | |
4252 | intel_dp_start_link_train(intel_dp); | |
4253 | intel_dp_stop_link_train(intel_dp); | |
4254 | } | |
4255 | } | |
4256 | ||
a4fc5ed6 KP |
4257 | /* |
4258 | * According to DP spec | |
4259 | * 5.1.2: | |
4260 | * 1. Read DPCD | |
4261 | * 2. Configure link according to Receiver Capabilities | |
4262 | * 3. Use Link Training from 2.5.3.3 and 3.5.1.3 | |
4263 | * 4. Check link status on receipt of hot-plug interrupt | |
39ff747b SS |
4264 | * |
4265 | * intel_dp_short_pulse - handles short pulse interrupts | |
4266 | * when full detection is not required. | |
4267 | * Returns %true if short pulse is handled and full detection | |
4268 | * is NOT required and %false otherwise. | |
a4fc5ed6 | 4269 | */ |
39ff747b | 4270 | static bool |
5c9114d0 | 4271 | intel_dp_short_pulse(struct intel_dp *intel_dp) |
a4fc5ed6 | 4272 | { |
5b215bcf | 4273 | struct drm_device *dev = intel_dp_to_dev(intel_dp); |
a60f0e38 | 4274 | u8 sink_irq_vector; |
39ff747b SS |
4275 | u8 old_sink_count = intel_dp->sink_count; |
4276 | bool ret; | |
5b215bcf | 4277 | |
4df6960e SS |
4278 | /* |
4279 | * Clearing compliance test variables to allow capturing | |
4280 | * of values for next automated test request. | |
4281 | */ | |
4282 | intel_dp->compliance_test_active = 0; | |
4283 | intel_dp->compliance_test_type = 0; | |
4284 | intel_dp->compliance_test_data = 0; | |
4285 | ||
39ff747b SS |
4286 | /* |
4287 | * Now read the DPCD to see if it's actually running | |
4288 | * If the current value of sink count doesn't match with | |
4289 | * the value that was stored earlier or dpcd read failed | |
4290 | * we need to do full detection | |
4291 | */ | |
4292 | ret = intel_dp_get_dpcd(intel_dp); | |
4293 | ||
4294 | if ((old_sink_count != intel_dp->sink_count) || !ret) { | |
4295 | /* No need to proceed if we are going to do full detect */ | |
4296 | return false; | |
59cd09e1 JB |
4297 | } |
4298 | ||
a60f0e38 JB |
4299 | /* Try to read the source of the interrupt */ |
4300 | if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 && | |
4301 | intel_dp_get_sink_irq(intel_dp, &sink_irq_vector)) { | |
4302 | /* Clear interrupt source */ | |
9d1a1031 JN |
4303 | drm_dp_dpcd_writeb(&intel_dp->aux, |
4304 | DP_DEVICE_SERVICE_IRQ_VECTOR, | |
4305 | sink_irq_vector); | |
a60f0e38 JB |
4306 | |
4307 | if (sink_irq_vector & DP_AUTOMATED_TEST_REQUEST) | |
09b1eb13 | 4308 | DRM_DEBUG_DRIVER("Test request in short pulse not handled\n"); |
a60f0e38 JB |
4309 | if (sink_irq_vector & (DP_CP_IRQ | DP_SINK_SPECIFIC_IRQ)) |
4310 | DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n"); | |
4311 | } | |
4312 | ||
5c9114d0 SS |
4313 | drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); |
4314 | intel_dp_check_link_status(intel_dp); | |
4315 | drm_modeset_unlock(&dev->mode_config.connection_mutex); | |
39ff747b SS |
4316 | |
4317 | return true; | |
a4fc5ed6 | 4318 | } |
a4fc5ed6 | 4319 | |
caf9ab24 | 4320 | /* XXX this is probably wrong for multiple downstream ports */ |
71ba9000 | 4321 | static enum drm_connector_status |
26d61aad | 4322 | intel_dp_detect_dpcd(struct intel_dp *intel_dp) |
71ba9000 | 4323 | { |
caf9ab24 | 4324 | uint8_t *dpcd = intel_dp->dpcd; |
caf9ab24 AJ |
4325 | uint8_t type; |
4326 | ||
4327 | if (!intel_dp_get_dpcd(intel_dp)) | |
4328 | return connector_status_disconnected; | |
4329 | ||
4330 | /* if there's no downstream port, we're done */ | |
4331 | if (!(dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT)) | |
26d61aad | 4332 | return connector_status_connected; |
caf9ab24 AJ |
4333 | |
4334 | /* If we're HPD-aware, SINK_COUNT changes dynamically */ | |
c9ff160b JN |
4335 | if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 && |
4336 | intel_dp->downstream_ports[0] & DP_DS_PORT_HPD) { | |
9d1a1031 | 4337 | |
30d9aa42 SS |
4338 | return intel_dp->sink_count ? |
4339 | connector_status_connected : connector_status_disconnected; | |
caf9ab24 AJ |
4340 | } |
4341 | ||
4342 | /* If no HPD, poke DDC gently */ | |
0b99836f | 4343 | if (drm_probe_ddc(&intel_dp->aux.ddc)) |
26d61aad | 4344 | return connector_status_connected; |
caf9ab24 AJ |
4345 | |
4346 | /* Well we tried, say unknown for unreliable port types */ | |
c9ff160b JN |
4347 | if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) { |
4348 | type = intel_dp->downstream_ports[0] & DP_DS_PORT_TYPE_MASK; | |
4349 | if (type == DP_DS_PORT_TYPE_VGA || | |
4350 | type == DP_DS_PORT_TYPE_NON_EDID) | |
4351 | return connector_status_unknown; | |
4352 | } else { | |
4353 | type = intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] & | |
4354 | DP_DWN_STRM_PORT_TYPE_MASK; | |
4355 | if (type == DP_DWN_STRM_PORT_TYPE_ANALOG || | |
4356 | type == DP_DWN_STRM_PORT_TYPE_OTHER) | |
4357 | return connector_status_unknown; | |
4358 | } | |
caf9ab24 AJ |
4359 | |
4360 | /* Anything else is out of spec, warn and ignore */ | |
4361 | DRM_DEBUG_KMS("Broken DP branch device, ignoring\n"); | |
26d61aad | 4362 | return connector_status_disconnected; |
71ba9000 AJ |
4363 | } |
4364 | ||
d410b56d CW |
4365 | static enum drm_connector_status |
4366 | edp_detect(struct intel_dp *intel_dp) | |
4367 | { | |
4368 | struct drm_device *dev = intel_dp_to_dev(intel_dp); | |
4369 | enum drm_connector_status status; | |
4370 | ||
4371 | status = intel_panel_detect(dev); | |
4372 | if (status == connector_status_unknown) | |
4373 | status = connector_status_connected; | |
4374 | ||
4375 | return status; | |
4376 | } | |
4377 | ||
b93433cc JN |
4378 | static bool ibx_digital_port_connected(struct drm_i915_private *dev_priv, |
4379 | struct intel_digital_port *port) | |
5eb08b69 | 4380 | { |
b93433cc | 4381 | u32 bit; |
01cb9ea6 | 4382 | |
0df53b77 JN |
4383 | switch (port->port) { |
4384 | case PORT_A: | |
4385 | return true; | |
4386 | case PORT_B: | |
4387 | bit = SDE_PORTB_HOTPLUG; | |
4388 | break; | |
4389 | case PORT_C: | |
4390 | bit = SDE_PORTC_HOTPLUG; | |
4391 | break; | |
4392 | case PORT_D: | |
4393 | bit = SDE_PORTD_HOTPLUG; | |
4394 | break; | |
4395 | default: | |
4396 | MISSING_CASE(port->port); | |
4397 | return false; | |
4398 | } | |
4399 | ||
4400 | return I915_READ(SDEISR) & bit; | |
4401 | } | |
4402 | ||
4403 | static bool cpt_digital_port_connected(struct drm_i915_private *dev_priv, | |
4404 | struct intel_digital_port *port) | |
4405 | { | |
4406 | u32 bit; | |
4407 | ||
4408 | switch (port->port) { | |
4409 | case PORT_A: | |
4410 | return true; | |
4411 | case PORT_B: | |
4412 | bit = SDE_PORTB_HOTPLUG_CPT; | |
4413 | break; | |
4414 | case PORT_C: | |
4415 | bit = SDE_PORTC_HOTPLUG_CPT; | |
4416 | break; | |
4417 | case PORT_D: | |
4418 | bit = SDE_PORTD_HOTPLUG_CPT; | |
4419 | break; | |
a78695d3 JN |
4420 | case PORT_E: |
4421 | bit = SDE_PORTE_HOTPLUG_SPT; | |
4422 | break; | |
0df53b77 JN |
4423 | default: |
4424 | MISSING_CASE(port->port); | |
4425 | return false; | |
b93433cc | 4426 | } |
1b469639 | 4427 | |
b93433cc | 4428 | return I915_READ(SDEISR) & bit; |
5eb08b69 ZW |
4429 | } |
4430 | ||
7e66bcf2 | 4431 | static bool g4x_digital_port_connected(struct drm_i915_private *dev_priv, |
1d245987 | 4432 | struct intel_digital_port *port) |
a4fc5ed6 | 4433 | { |
9642c81c | 4434 | u32 bit; |
5eb08b69 | 4435 | |
9642c81c JN |
4436 | switch (port->port) { |
4437 | case PORT_B: | |
4438 | bit = PORTB_HOTPLUG_LIVE_STATUS_G4X; | |
4439 | break; | |
4440 | case PORT_C: | |
4441 | bit = PORTC_HOTPLUG_LIVE_STATUS_G4X; | |
4442 | break; | |
4443 | case PORT_D: | |
4444 | bit = PORTD_HOTPLUG_LIVE_STATUS_G4X; | |
4445 | break; | |
4446 | default: | |
4447 | MISSING_CASE(port->port); | |
4448 | return false; | |
4449 | } | |
4450 | ||
4451 | return I915_READ(PORT_HOTPLUG_STAT) & bit; | |
4452 | } | |
4453 | ||
0780cd36 VS |
4454 | static bool gm45_digital_port_connected(struct drm_i915_private *dev_priv, |
4455 | struct intel_digital_port *port) | |
9642c81c JN |
4456 | { |
4457 | u32 bit; | |
4458 | ||
4459 | switch (port->port) { | |
4460 | case PORT_B: | |
0780cd36 | 4461 | bit = PORTB_HOTPLUG_LIVE_STATUS_GM45; |
9642c81c JN |
4462 | break; |
4463 | case PORT_C: | |
0780cd36 | 4464 | bit = PORTC_HOTPLUG_LIVE_STATUS_GM45; |
9642c81c JN |
4465 | break; |
4466 | case PORT_D: | |
0780cd36 | 4467 | bit = PORTD_HOTPLUG_LIVE_STATUS_GM45; |
9642c81c JN |
4468 | break; |
4469 | default: | |
4470 | MISSING_CASE(port->port); | |
4471 | return false; | |
a4fc5ed6 KP |
4472 | } |
4473 | ||
1d245987 | 4474 | return I915_READ(PORT_HOTPLUG_STAT) & bit; |
2a592bec DA |
4475 | } |
4476 | ||
e464bfde | 4477 | static bool bxt_digital_port_connected(struct drm_i915_private *dev_priv, |
e2ec35a5 | 4478 | struct intel_digital_port *intel_dig_port) |
e464bfde | 4479 | { |
e2ec35a5 SJ |
4480 | struct intel_encoder *intel_encoder = &intel_dig_port->base; |
4481 | enum port port; | |
e464bfde JN |
4482 | u32 bit; |
4483 | ||
e2ec35a5 SJ |
4484 | intel_hpd_pin_to_port(intel_encoder->hpd_pin, &port); |
4485 | switch (port) { | |
e464bfde JN |
4486 | case PORT_A: |
4487 | bit = BXT_DE_PORT_HP_DDIA; | |
4488 | break; | |
4489 | case PORT_B: | |
4490 | bit = BXT_DE_PORT_HP_DDIB; | |
4491 | break; | |
4492 | case PORT_C: | |
4493 | bit = BXT_DE_PORT_HP_DDIC; | |
4494 | break; | |
4495 | default: | |
e2ec35a5 | 4496 | MISSING_CASE(port); |
e464bfde JN |
4497 | return false; |
4498 | } | |
4499 | ||
4500 | return I915_READ(GEN8_DE_PORT_ISR) & bit; | |
4501 | } | |
4502 | ||
7e66bcf2 JN |
4503 | /* |
4504 | * intel_digital_port_connected - is the specified port connected? | |
4505 | * @dev_priv: i915 private structure | |
4506 | * @port: the port to test | |
4507 | * | |
4508 | * Return %true if @port is connected, %false otherwise. | |
4509 | */ | |
237ed86c | 4510 | bool intel_digital_port_connected(struct drm_i915_private *dev_priv, |
7e66bcf2 JN |
4511 | struct intel_digital_port *port) |
4512 | { | |
0df53b77 | 4513 | if (HAS_PCH_IBX(dev_priv)) |
7e66bcf2 | 4514 | return ibx_digital_port_connected(dev_priv, port); |
22824fac | 4515 | else if (HAS_PCH_SPLIT(dev_priv)) |
0df53b77 | 4516 | return cpt_digital_port_connected(dev_priv, port); |
e464bfde JN |
4517 | else if (IS_BROXTON(dev_priv)) |
4518 | return bxt_digital_port_connected(dev_priv, port); | |
0780cd36 VS |
4519 | else if (IS_GM45(dev_priv)) |
4520 | return gm45_digital_port_connected(dev_priv, port); | |
7e66bcf2 JN |
4521 | else |
4522 | return g4x_digital_port_connected(dev_priv, port); | |
4523 | } | |
4524 | ||
8c241fef | 4525 | static struct edid * |
beb60608 | 4526 | intel_dp_get_edid(struct intel_dp *intel_dp) |
8c241fef | 4527 | { |
beb60608 | 4528 | struct intel_connector *intel_connector = intel_dp->attached_connector; |
d6f24d0f | 4529 | |
9cd300e0 JN |
4530 | /* use cached edid if we have one */ |
4531 | if (intel_connector->edid) { | |
9cd300e0 JN |
4532 | /* invalid edid */ |
4533 | if (IS_ERR(intel_connector->edid)) | |
d6f24d0f JB |
4534 | return NULL; |
4535 | ||
55e9edeb | 4536 | return drm_edid_duplicate(intel_connector->edid); |
beb60608 CW |
4537 | } else |
4538 | return drm_get_edid(&intel_connector->base, | |
4539 | &intel_dp->aux.ddc); | |
4540 | } | |
8c241fef | 4541 | |
beb60608 CW |
4542 | static void |
4543 | intel_dp_set_edid(struct intel_dp *intel_dp) | |
4544 | { | |
4545 | struct intel_connector *intel_connector = intel_dp->attached_connector; | |
4546 | struct edid *edid; | |
8c241fef | 4547 | |
f21a2198 | 4548 | intel_dp_unset_edid(intel_dp); |
beb60608 CW |
4549 | edid = intel_dp_get_edid(intel_dp); |
4550 | intel_connector->detect_edid = edid; | |
4551 | ||
4552 | if (intel_dp->force_audio != HDMI_AUDIO_AUTO) | |
4553 | intel_dp->has_audio = intel_dp->force_audio == HDMI_AUDIO_ON; | |
4554 | else | |
4555 | intel_dp->has_audio = drm_detect_monitor_audio(edid); | |
8c241fef KP |
4556 | } |
4557 | ||
beb60608 CW |
4558 | static void |
4559 | intel_dp_unset_edid(struct intel_dp *intel_dp) | |
8c241fef | 4560 | { |
beb60608 | 4561 | struct intel_connector *intel_connector = intel_dp->attached_connector; |
8c241fef | 4562 | |
beb60608 CW |
4563 | kfree(intel_connector->detect_edid); |
4564 | intel_connector->detect_edid = NULL; | |
9cd300e0 | 4565 | |
beb60608 CW |
4566 | intel_dp->has_audio = false; |
4567 | } | |
d6f24d0f | 4568 | |
f21a2198 SS |
4569 | static void |
4570 | intel_dp_long_pulse(struct intel_connector *intel_connector) | |
a9756bb5 | 4571 | { |
f21a2198 | 4572 | struct drm_connector *connector = &intel_connector->base; |
a9756bb5 | 4573 | struct intel_dp *intel_dp = intel_attached_dp(connector); |
d63885da PZ |
4574 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
4575 | struct intel_encoder *intel_encoder = &intel_dig_port->base; | |
fa90ecef | 4576 | struct drm_device *dev = connector->dev; |
a9756bb5 | 4577 | enum drm_connector_status status; |
671dedd2 | 4578 | enum intel_display_power_domain power_domain; |
0e32b39c | 4579 | bool ret; |
09b1eb13 | 4580 | u8 sink_irq_vector; |
a9756bb5 | 4581 | |
25f78f58 VS |
4582 | power_domain = intel_display_port_aux_power_domain(intel_encoder); |
4583 | intel_display_power_get(to_i915(dev), power_domain); | |
a9756bb5 | 4584 | |
d410b56d CW |
4585 | /* Can't disconnect eDP, but you can close the lid... */ |
4586 | if (is_edp(intel_dp)) | |
4587 | status = edp_detect(intel_dp); | |
c555a81d ACO |
4588 | else if (intel_digital_port_connected(to_i915(dev), |
4589 | dp_to_dig_port(intel_dp))) | |
4590 | status = intel_dp_detect_dpcd(intel_dp); | |
a9756bb5 | 4591 | else |
c555a81d ACO |
4592 | status = connector_status_disconnected; |
4593 | ||
4df6960e SS |
4594 | if (status != connector_status_connected) { |
4595 | intel_dp->compliance_test_active = 0; | |
4596 | intel_dp->compliance_test_type = 0; | |
4597 | intel_dp->compliance_test_data = 0; | |
4598 | ||
c8c8fb33 | 4599 | goto out; |
4df6960e | 4600 | } |
a9756bb5 | 4601 | |
f21a2198 SS |
4602 | if (intel_encoder->type != INTEL_OUTPUT_EDP) |
4603 | intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT; | |
4604 | ||
0d198328 AJ |
4605 | intel_dp_probe_oui(intel_dp); |
4606 | ||
0e32b39c DA |
4607 | ret = intel_dp_probe_mst(intel_dp); |
4608 | if (ret) { | |
f21a2198 SS |
4609 | /* |
4610 | * If we are in MST mode then this connector | |
4611 | * won't appear connected or have anything | |
4612 | * with EDID on it | |
4613 | */ | |
0e32b39c DA |
4614 | status = connector_status_disconnected; |
4615 | goto out; | |
7d23e3c3 SS |
4616 | } else if (connector->status == connector_status_connected) { |
4617 | /* | |
4618 | * If display was connected already and is still connected | |
4619 | * check links status, there has been known issues of | |
4620 | * link loss triggerring long pulse!!!! | |
4621 | */ | |
4622 | drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); | |
4623 | intel_dp_check_link_status(intel_dp); | |
4624 | drm_modeset_unlock(&dev->mode_config.connection_mutex); | |
4625 | goto out; | |
0e32b39c DA |
4626 | } |
4627 | ||
4df6960e SS |
4628 | /* |
4629 | * Clearing NACK and defer counts to get their exact values | |
4630 | * while reading EDID which are required by Compliance tests | |
4631 | * 4.2.2.4 and 4.2.2.5 | |
4632 | */ | |
4633 | intel_dp->aux.i2c_nack_count = 0; | |
4634 | intel_dp->aux.i2c_defer_count = 0; | |
4635 | ||
beb60608 | 4636 | intel_dp_set_edid(intel_dp); |
a9756bb5 | 4637 | |
c8c8fb33 | 4638 | status = connector_status_connected; |
7d23e3c3 | 4639 | intel_dp->detect_done = true; |
c8c8fb33 | 4640 | |
09b1eb13 TP |
4641 | /* Try to read the source of the interrupt */ |
4642 | if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 && | |
4643 | intel_dp_get_sink_irq(intel_dp, &sink_irq_vector)) { | |
4644 | /* Clear interrupt source */ | |
4645 | drm_dp_dpcd_writeb(&intel_dp->aux, | |
4646 | DP_DEVICE_SERVICE_IRQ_VECTOR, | |
4647 | sink_irq_vector); | |
4648 | ||
4649 | if (sink_irq_vector & DP_AUTOMATED_TEST_REQUEST) | |
4650 | intel_dp_handle_test_request(intel_dp); | |
4651 | if (sink_irq_vector & (DP_CP_IRQ | DP_SINK_SPECIFIC_IRQ)) | |
4652 | DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n"); | |
4653 | } | |
4654 | ||
c8c8fb33 | 4655 | out: |
7d23e3c3 | 4656 | if (status != connector_status_connected) { |
f21a2198 | 4657 | intel_dp_unset_edid(intel_dp); |
7d23e3c3 SS |
4658 | /* |
4659 | * If we were in MST mode, and device is not there, | |
4660 | * get out of MST mode | |
4661 | */ | |
4662 | if (intel_dp->is_mst) { | |
4663 | DRM_DEBUG_KMS("MST device may have disappeared %d vs %d\n", | |
4664 | intel_dp->is_mst, intel_dp->mst_mgr.mst_state); | |
4665 | intel_dp->is_mst = false; | |
4666 | drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr, | |
4667 | intel_dp->is_mst); | |
4668 | } | |
4669 | } | |
4670 | ||
25f78f58 | 4671 | intel_display_power_put(to_i915(dev), power_domain); |
f21a2198 SS |
4672 | return; |
4673 | } | |
4674 | ||
4675 | static enum drm_connector_status | |
4676 | intel_dp_detect(struct drm_connector *connector, bool force) | |
4677 | { | |
4678 | struct intel_dp *intel_dp = intel_attached_dp(connector); | |
4679 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); | |
4680 | struct intel_encoder *intel_encoder = &intel_dig_port->base; | |
4681 | struct intel_connector *intel_connector = to_intel_connector(connector); | |
4682 | ||
4683 | DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", | |
4684 | connector->base.id, connector->name); | |
4685 | ||
4686 | if (intel_dp->is_mst) { | |
4687 | /* MST devices are disconnected from a monitor POV */ | |
4688 | intel_dp_unset_edid(intel_dp); | |
4689 | if (intel_encoder->type != INTEL_OUTPUT_EDP) | |
4690 | intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT; | |
4691 | return connector_status_disconnected; | |
4692 | } | |
4693 | ||
7d23e3c3 SS |
4694 | /* If full detect is not performed yet, do a full detect */ |
4695 | if (!intel_dp->detect_done) | |
4696 | intel_dp_long_pulse(intel_dp->attached_connector); | |
4697 | ||
4698 | intel_dp->detect_done = false; | |
f21a2198 SS |
4699 | |
4700 | if (intel_connector->detect_edid) | |
4701 | return connector_status_connected; | |
4702 | else | |
4703 | return connector_status_disconnected; | |
a4fc5ed6 KP |
4704 | } |
4705 | ||
beb60608 CW |
4706 | static void |
4707 | intel_dp_force(struct drm_connector *connector) | |
a4fc5ed6 | 4708 | { |
df0e9248 | 4709 | struct intel_dp *intel_dp = intel_attached_dp(connector); |
beb60608 | 4710 | struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base; |
25f78f58 | 4711 | struct drm_i915_private *dev_priv = to_i915(intel_encoder->base.dev); |
671dedd2 | 4712 | enum intel_display_power_domain power_domain; |
a4fc5ed6 | 4713 | |
beb60608 CW |
4714 | DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", |
4715 | connector->base.id, connector->name); | |
4716 | intel_dp_unset_edid(intel_dp); | |
a4fc5ed6 | 4717 | |
beb60608 CW |
4718 | if (connector->status != connector_status_connected) |
4719 | return; | |
671dedd2 | 4720 | |
25f78f58 VS |
4721 | power_domain = intel_display_port_aux_power_domain(intel_encoder); |
4722 | intel_display_power_get(dev_priv, power_domain); | |
beb60608 CW |
4723 | |
4724 | intel_dp_set_edid(intel_dp); | |
4725 | ||
25f78f58 | 4726 | intel_display_power_put(dev_priv, power_domain); |
beb60608 CW |
4727 | |
4728 | if (intel_encoder->type != INTEL_OUTPUT_EDP) | |
4729 | intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT; | |
4730 | } | |
4731 | ||
4732 | static int intel_dp_get_modes(struct drm_connector *connector) | |
4733 | { | |
4734 | struct intel_connector *intel_connector = to_intel_connector(connector); | |
4735 | struct edid *edid; | |
4736 | ||
4737 | edid = intel_connector->detect_edid; | |
4738 | if (edid) { | |
4739 | int ret = intel_connector_update_modes(connector, edid); | |
4740 | if (ret) | |
4741 | return ret; | |
4742 | } | |
32f9d658 | 4743 | |
f8779fda | 4744 | /* if eDP has no EDID, fall back to fixed mode */ |
beb60608 CW |
4745 | if (is_edp(intel_attached_dp(connector)) && |
4746 | intel_connector->panel.fixed_mode) { | |
f8779fda | 4747 | struct drm_display_mode *mode; |
beb60608 CW |
4748 | |
4749 | mode = drm_mode_duplicate(connector->dev, | |
dd06f90e | 4750 | intel_connector->panel.fixed_mode); |
f8779fda | 4751 | if (mode) { |
32f9d658 ZW |
4752 | drm_mode_probed_add(connector, mode); |
4753 | return 1; | |
4754 | } | |
4755 | } | |
beb60608 | 4756 | |
32f9d658 | 4757 | return 0; |
a4fc5ed6 KP |
4758 | } |
4759 | ||
1aad7ac0 CW |
4760 | static bool |
4761 | intel_dp_detect_audio(struct drm_connector *connector) | |
4762 | { | |
1aad7ac0 | 4763 | bool has_audio = false; |
beb60608 | 4764 | struct edid *edid; |
1aad7ac0 | 4765 | |
beb60608 CW |
4766 | edid = to_intel_connector(connector)->detect_edid; |
4767 | if (edid) | |
1aad7ac0 | 4768 | has_audio = drm_detect_monitor_audio(edid); |
671dedd2 | 4769 | |
1aad7ac0 CW |
4770 | return has_audio; |
4771 | } | |
4772 | ||
f684960e CW |
4773 | static int |
4774 | intel_dp_set_property(struct drm_connector *connector, | |
4775 | struct drm_property *property, | |
4776 | uint64_t val) | |
4777 | { | |
e953fd7b | 4778 | struct drm_i915_private *dev_priv = connector->dev->dev_private; |
53b41837 | 4779 | struct intel_connector *intel_connector = to_intel_connector(connector); |
da63a9f2 PZ |
4780 | struct intel_encoder *intel_encoder = intel_attached_encoder(connector); |
4781 | struct intel_dp *intel_dp = enc_to_intel_dp(&intel_encoder->base); | |
f684960e CW |
4782 | int ret; |
4783 | ||
662595df | 4784 | ret = drm_object_property_set_value(&connector->base, property, val); |
f684960e CW |
4785 | if (ret) |
4786 | return ret; | |
4787 | ||
3f43c48d | 4788 | if (property == dev_priv->force_audio_property) { |
1aad7ac0 CW |
4789 | int i = val; |
4790 | bool has_audio; | |
4791 | ||
4792 | if (i == intel_dp->force_audio) | |
f684960e CW |
4793 | return 0; |
4794 | ||
1aad7ac0 | 4795 | intel_dp->force_audio = i; |
f684960e | 4796 | |
c3e5f67b | 4797 | if (i == HDMI_AUDIO_AUTO) |
1aad7ac0 CW |
4798 | has_audio = intel_dp_detect_audio(connector); |
4799 | else | |
c3e5f67b | 4800 | has_audio = (i == HDMI_AUDIO_ON); |
1aad7ac0 CW |
4801 | |
4802 | if (has_audio == intel_dp->has_audio) | |
f684960e CW |
4803 | return 0; |
4804 | ||
1aad7ac0 | 4805 | intel_dp->has_audio = has_audio; |
f684960e CW |
4806 | goto done; |
4807 | } | |
4808 | ||
e953fd7b | 4809 | if (property == dev_priv->broadcast_rgb_property) { |
ae4edb80 | 4810 | bool old_auto = intel_dp->color_range_auto; |
0f2a2a75 | 4811 | bool old_range = intel_dp->limited_color_range; |
ae4edb80 | 4812 | |
55bc60db VS |
4813 | switch (val) { |
4814 | case INTEL_BROADCAST_RGB_AUTO: | |
4815 | intel_dp->color_range_auto = true; | |
4816 | break; | |
4817 | case INTEL_BROADCAST_RGB_FULL: | |
4818 | intel_dp->color_range_auto = false; | |
0f2a2a75 | 4819 | intel_dp->limited_color_range = false; |
55bc60db VS |
4820 | break; |
4821 | case INTEL_BROADCAST_RGB_LIMITED: | |
4822 | intel_dp->color_range_auto = false; | |
0f2a2a75 | 4823 | intel_dp->limited_color_range = true; |
55bc60db VS |
4824 | break; |
4825 | default: | |
4826 | return -EINVAL; | |
4827 | } | |
ae4edb80 DV |
4828 | |
4829 | if (old_auto == intel_dp->color_range_auto && | |
0f2a2a75 | 4830 | old_range == intel_dp->limited_color_range) |
ae4edb80 DV |
4831 | return 0; |
4832 | ||
e953fd7b CW |
4833 | goto done; |
4834 | } | |
4835 | ||
53b41837 YN |
4836 | if (is_edp(intel_dp) && |
4837 | property == connector->dev->mode_config.scaling_mode_property) { | |
4838 | if (val == DRM_MODE_SCALE_NONE) { | |
4839 | DRM_DEBUG_KMS("no scaling not supported\n"); | |
4840 | return -EINVAL; | |
4841 | } | |
4842 | ||
4843 | if (intel_connector->panel.fitting_mode == val) { | |
4844 | /* the eDP scaling property is not changed */ | |
4845 | return 0; | |
4846 | } | |
4847 | intel_connector->panel.fitting_mode = val; | |
4848 | ||
4849 | goto done; | |
4850 | } | |
4851 | ||
f684960e CW |
4852 | return -EINVAL; |
4853 | ||
4854 | done: | |
c0c36b94 CW |
4855 | if (intel_encoder->base.crtc) |
4856 | intel_crtc_restore_mode(intel_encoder->base.crtc); | |
f684960e CW |
4857 | |
4858 | return 0; | |
4859 | } | |
4860 | ||
a4fc5ed6 | 4861 | static void |
73845adf | 4862 | intel_dp_connector_destroy(struct drm_connector *connector) |
a4fc5ed6 | 4863 | { |
1d508706 | 4864 | struct intel_connector *intel_connector = to_intel_connector(connector); |
aaa6fd2a | 4865 | |
10e972d3 | 4866 | kfree(intel_connector->detect_edid); |
beb60608 | 4867 | |
9cd300e0 JN |
4868 | if (!IS_ERR_OR_NULL(intel_connector->edid)) |
4869 | kfree(intel_connector->edid); | |
4870 | ||
acd8db10 PZ |
4871 | /* Can't call is_edp() since the encoder may have been destroyed |
4872 | * already. */ | |
4873 | if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) | |
1d508706 | 4874 | intel_panel_fini(&intel_connector->panel); |
aaa6fd2a | 4875 | |
a4fc5ed6 | 4876 | drm_connector_cleanup(connector); |
55f78c43 | 4877 | kfree(connector); |
a4fc5ed6 KP |
4878 | } |
4879 | ||
00c09d70 | 4880 | void intel_dp_encoder_destroy(struct drm_encoder *encoder) |
24d05927 | 4881 | { |
da63a9f2 PZ |
4882 | struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder); |
4883 | struct intel_dp *intel_dp = &intel_dig_port->dp; | |
24d05927 | 4884 | |
0e32b39c | 4885 | intel_dp_mst_encoder_cleanup(intel_dig_port); |
bd943159 KP |
4886 | if (is_edp(intel_dp)) { |
4887 | cancel_delayed_work_sync(&intel_dp->panel_vdd_work); | |
951468f3 VS |
4888 | /* |
4889 | * vdd might still be enabled do to the delayed vdd off. | |
4890 | * Make sure vdd is actually turned off here. | |
4891 | */ | |
773538e8 | 4892 | pps_lock(intel_dp); |
4be73780 | 4893 | edp_panel_vdd_off_sync(intel_dp); |
773538e8 VS |
4894 | pps_unlock(intel_dp); |
4895 | ||
01527b31 CT |
4896 | if (intel_dp->edp_notifier.notifier_call) { |
4897 | unregister_reboot_notifier(&intel_dp->edp_notifier); | |
4898 | intel_dp->edp_notifier.notifier_call = NULL; | |
4899 | } | |
bd943159 | 4900 | } |
c8bd0e49 | 4901 | drm_encoder_cleanup(encoder); |
da63a9f2 | 4902 | kfree(intel_dig_port); |
24d05927 DV |
4903 | } |
4904 | ||
07f9cd0b ID |
4905 | static void intel_dp_encoder_suspend(struct intel_encoder *intel_encoder) |
4906 | { | |
4907 | struct intel_dp *intel_dp = enc_to_intel_dp(&intel_encoder->base); | |
4908 | ||
4909 | if (!is_edp(intel_dp)) | |
4910 | return; | |
4911 | ||
951468f3 VS |
4912 | /* |
4913 | * vdd might still be enabled do to the delayed vdd off. | |
4914 | * Make sure vdd is actually turned off here. | |
4915 | */ | |
afa4e53a | 4916 | cancel_delayed_work_sync(&intel_dp->panel_vdd_work); |
773538e8 | 4917 | pps_lock(intel_dp); |
07f9cd0b | 4918 | edp_panel_vdd_off_sync(intel_dp); |
773538e8 | 4919 | pps_unlock(intel_dp); |
07f9cd0b ID |
4920 | } |
4921 | ||
49e6bc51 VS |
4922 | static void intel_edp_panel_vdd_sanitize(struct intel_dp *intel_dp) |
4923 | { | |
4924 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); | |
4925 | struct drm_device *dev = intel_dig_port->base.base.dev; | |
4926 | struct drm_i915_private *dev_priv = dev->dev_private; | |
4927 | enum intel_display_power_domain power_domain; | |
4928 | ||
4929 | lockdep_assert_held(&dev_priv->pps_mutex); | |
4930 | ||
4931 | if (!edp_have_panel_vdd(intel_dp)) | |
4932 | return; | |
4933 | ||
4934 | /* | |
4935 | * The VDD bit needs a power domain reference, so if the bit is | |
4936 | * already enabled when we boot or resume, grab this reference and | |
4937 | * schedule a vdd off, so we don't hold on to the reference | |
4938 | * indefinitely. | |
4939 | */ | |
4940 | DRM_DEBUG_KMS("VDD left on by BIOS, adjusting state tracking\n"); | |
25f78f58 | 4941 | power_domain = intel_display_port_aux_power_domain(&intel_dig_port->base); |
49e6bc51 VS |
4942 | intel_display_power_get(dev_priv, power_domain); |
4943 | ||
4944 | edp_panel_vdd_schedule_off(intel_dp); | |
4945 | } | |
4946 | ||
6d93c0c4 ID |
4947 | static void intel_dp_encoder_reset(struct drm_encoder *encoder) |
4948 | { | |
49e6bc51 VS |
4949 | struct intel_dp *intel_dp; |
4950 | ||
4951 | if (to_intel_encoder(encoder)->type != INTEL_OUTPUT_EDP) | |
4952 | return; | |
4953 | ||
4954 | intel_dp = enc_to_intel_dp(encoder); | |
4955 | ||
4956 | pps_lock(intel_dp); | |
4957 | ||
4958 | /* | |
4959 | * Read out the current power sequencer assignment, | |
4960 | * in case the BIOS did something with it. | |
4961 | */ | |
666a4537 | 4962 | if (IS_VALLEYVIEW(encoder->dev) || IS_CHERRYVIEW(encoder->dev)) |
49e6bc51 VS |
4963 | vlv_initial_power_sequencer_setup(intel_dp); |
4964 | ||
4965 | intel_edp_panel_vdd_sanitize(intel_dp); | |
4966 | ||
4967 | pps_unlock(intel_dp); | |
6d93c0c4 ID |
4968 | } |
4969 | ||
a4fc5ed6 | 4970 | static const struct drm_connector_funcs intel_dp_connector_funcs = { |
4d688a2a | 4971 | .dpms = drm_atomic_helper_connector_dpms, |
a4fc5ed6 | 4972 | .detect = intel_dp_detect, |
beb60608 | 4973 | .force = intel_dp_force, |
a4fc5ed6 | 4974 | .fill_modes = drm_helper_probe_single_connector_modes, |
f684960e | 4975 | .set_property = intel_dp_set_property, |
2545e4a6 | 4976 | .atomic_get_property = intel_connector_atomic_get_property, |
73845adf | 4977 | .destroy = intel_dp_connector_destroy, |
c6f95f27 | 4978 | .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, |
98969725 | 4979 | .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, |
a4fc5ed6 KP |
4980 | }; |
4981 | ||
4982 | static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs = { | |
4983 | .get_modes = intel_dp_get_modes, | |
4984 | .mode_valid = intel_dp_mode_valid, | |
df0e9248 | 4985 | .best_encoder = intel_best_encoder, |
a4fc5ed6 KP |
4986 | }; |
4987 | ||
a4fc5ed6 | 4988 | static const struct drm_encoder_funcs intel_dp_enc_funcs = { |
6d93c0c4 | 4989 | .reset = intel_dp_encoder_reset, |
24d05927 | 4990 | .destroy = intel_dp_encoder_destroy, |
a4fc5ed6 KP |
4991 | }; |
4992 | ||
b2c5c181 | 4993 | enum irqreturn |
13cf5504 DA |
4994 | intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd) |
4995 | { | |
4996 | struct intel_dp *intel_dp = &intel_dig_port->dp; | |
1c767b33 | 4997 | struct intel_encoder *intel_encoder = &intel_dig_port->base; |
0e32b39c DA |
4998 | struct drm_device *dev = intel_dig_port->base.base.dev; |
4999 | struct drm_i915_private *dev_priv = dev->dev_private; | |
1c767b33 | 5000 | enum intel_display_power_domain power_domain; |
b2c5c181 | 5001 | enum irqreturn ret = IRQ_NONE; |
1c767b33 | 5002 | |
2540058f TI |
5003 | if (intel_dig_port->base.type != INTEL_OUTPUT_EDP && |
5004 | intel_dig_port->base.type != INTEL_OUTPUT_HDMI) | |
0e32b39c | 5005 | intel_dig_port->base.type = INTEL_OUTPUT_DISPLAYPORT; |
13cf5504 | 5006 | |
7a7f84cc VS |
5007 | if (long_hpd && intel_dig_port->base.type == INTEL_OUTPUT_EDP) { |
5008 | /* | |
5009 | * vdd off can generate a long pulse on eDP which | |
5010 | * would require vdd on to handle it, and thus we | |
5011 | * would end up in an endless cycle of | |
5012 | * "vdd off -> long hpd -> vdd on -> detect -> vdd off -> ..." | |
5013 | */ | |
5014 | DRM_DEBUG_KMS("ignoring long hpd on eDP port %c\n", | |
5015 | port_name(intel_dig_port->port)); | |
a8b3d52f | 5016 | return IRQ_HANDLED; |
7a7f84cc VS |
5017 | } |
5018 | ||
26fbb774 VS |
5019 | DRM_DEBUG_KMS("got hpd irq on port %c - %s\n", |
5020 | port_name(intel_dig_port->port), | |
0e32b39c | 5021 | long_hpd ? "long" : "short"); |
13cf5504 | 5022 | |
25f78f58 | 5023 | power_domain = intel_display_port_aux_power_domain(intel_encoder); |
1c767b33 ID |
5024 | intel_display_power_get(dev_priv, power_domain); |
5025 | ||
0e32b39c | 5026 | if (long_hpd) { |
5fa836a9 MK |
5027 | /* indicate that we need to restart link training */ |
5028 | intel_dp->train_set_valid = false; | |
2a592bec | 5029 | |
7d23e3c3 SS |
5030 | intel_dp_long_pulse(intel_dp->attached_connector); |
5031 | if (intel_dp->is_mst) | |
5032 | ret = IRQ_HANDLED; | |
5033 | goto put_power; | |
0e32b39c | 5034 | |
0e32b39c DA |
5035 | } else { |
5036 | if (intel_dp->is_mst) { | |
7d23e3c3 SS |
5037 | if (intel_dp_check_mst_status(intel_dp) == -EINVAL) { |
5038 | /* | |
5039 | * If we were in MST mode, and device is not | |
5040 | * there, get out of MST mode | |
5041 | */ | |
5042 | DRM_DEBUG_KMS("MST device may have disappeared %d vs %d\n", | |
5043 | intel_dp->is_mst, intel_dp->mst_mgr.mst_state); | |
5044 | intel_dp->is_mst = false; | |
5045 | drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr, | |
5046 | intel_dp->is_mst); | |
5047 | goto put_power; | |
5048 | } | |
0e32b39c DA |
5049 | } |
5050 | ||
39ff747b SS |
5051 | if (!intel_dp->is_mst) { |
5052 | if (!intel_dp_short_pulse(intel_dp)) { | |
5053 | intel_dp_long_pulse(intel_dp->attached_connector); | |
5054 | goto put_power; | |
5055 | } | |
5056 | } | |
0e32b39c | 5057 | } |
b2c5c181 DV |
5058 | |
5059 | ret = IRQ_HANDLED; | |
5060 | ||
1c767b33 ID |
5061 | put_power: |
5062 | intel_display_power_put(dev_priv, power_domain); | |
5063 | ||
5064 | return ret; | |
13cf5504 DA |
5065 | } |
5066 | ||
477ec328 | 5067 | /* check the VBT to see whether the eDP is on another port */ |
5d8a7752 | 5068 | bool intel_dp_is_edp(struct drm_device *dev, enum port port) |
36e83a18 ZY |
5069 | { |
5070 | struct drm_i915_private *dev_priv = dev->dev_private; | |
36e83a18 | 5071 | |
53ce81a7 VS |
5072 | /* |
5073 | * eDP not supported on g4x. so bail out early just | |
5074 | * for a bit extra safety in case the VBT is bonkers. | |
5075 | */ | |
5076 | if (INTEL_INFO(dev)->gen < 5) | |
5077 | return false; | |
5078 | ||
3b32a35b VS |
5079 | if (port == PORT_A) |
5080 | return true; | |
5081 | ||
951d9efe | 5082 | return intel_bios_is_port_edp(dev_priv, port); |
36e83a18 ZY |
5083 | } |
5084 | ||
0e32b39c | 5085 | void |
f684960e CW |
5086 | intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connector) |
5087 | { | |
53b41837 YN |
5088 | struct intel_connector *intel_connector = to_intel_connector(connector); |
5089 | ||
3f43c48d | 5090 | intel_attach_force_audio_property(connector); |
e953fd7b | 5091 | intel_attach_broadcast_rgb_property(connector); |
55bc60db | 5092 | intel_dp->color_range_auto = true; |
53b41837 YN |
5093 | |
5094 | if (is_edp(intel_dp)) { | |
5095 | drm_mode_create_scaling_mode_property(connector->dev); | |
6de6d846 RC |
5096 | drm_object_attach_property( |
5097 | &connector->base, | |
53b41837 | 5098 | connector->dev->mode_config.scaling_mode_property, |
8e740cd1 YN |
5099 | DRM_MODE_SCALE_ASPECT); |
5100 | intel_connector->panel.fitting_mode = DRM_MODE_SCALE_ASPECT; | |
53b41837 | 5101 | } |
f684960e CW |
5102 | } |
5103 | ||
dada1a9f ID |
5104 | static void intel_dp_init_panel_power_timestamps(struct intel_dp *intel_dp) |
5105 | { | |
d28d4731 | 5106 | intel_dp->panel_power_off_time = ktime_get_boottime(); |
dada1a9f ID |
5107 | intel_dp->last_power_on = jiffies; |
5108 | intel_dp->last_backlight_off = jiffies; | |
5109 | } | |
5110 | ||
67a54566 DV |
5111 | static void |
5112 | intel_dp_init_panel_power_sequencer(struct drm_device *dev, | |
36b5f425 | 5113 | struct intel_dp *intel_dp) |
67a54566 DV |
5114 | { |
5115 | struct drm_i915_private *dev_priv = dev->dev_private; | |
36b5f425 VS |
5116 | struct edp_power_seq cur, vbt, spec, |
5117 | *final = &intel_dp->pps_delays; | |
b0a08bec | 5118 | u32 pp_on, pp_off, pp_div = 0, pp_ctl = 0; |
f0f59a00 | 5119 | i915_reg_t pp_ctrl_reg, pp_on_reg, pp_off_reg, pp_div_reg; |
453c5420 | 5120 | |
e39b999a VS |
5121 | lockdep_assert_held(&dev_priv->pps_mutex); |
5122 | ||
81ddbc69 VS |
5123 | /* already initialized? */ |
5124 | if (final->t11_t12 != 0) | |
5125 | return; | |
5126 | ||
b0a08bec VK |
5127 | if (IS_BROXTON(dev)) { |
5128 | /* | |
5129 | * TODO: BXT has 2 sets of PPS registers. | |
5130 | * Correct Register for Broxton need to be identified | |
5131 | * using VBT. hardcoding for now | |
5132 | */ | |
5133 | pp_ctrl_reg = BXT_PP_CONTROL(0); | |
5134 | pp_on_reg = BXT_PP_ON_DELAYS(0); | |
5135 | pp_off_reg = BXT_PP_OFF_DELAYS(0); | |
5136 | } else if (HAS_PCH_SPLIT(dev)) { | |
bf13e81b | 5137 | pp_ctrl_reg = PCH_PP_CONTROL; |
453c5420 JB |
5138 | pp_on_reg = PCH_PP_ON_DELAYS; |
5139 | pp_off_reg = PCH_PP_OFF_DELAYS; | |
5140 | pp_div_reg = PCH_PP_DIVISOR; | |
5141 | } else { | |
bf13e81b JN |
5142 | enum pipe pipe = vlv_power_sequencer_pipe(intel_dp); |
5143 | ||
5144 | pp_ctrl_reg = VLV_PIPE_PP_CONTROL(pipe); | |
5145 | pp_on_reg = VLV_PIPE_PP_ON_DELAYS(pipe); | |
5146 | pp_off_reg = VLV_PIPE_PP_OFF_DELAYS(pipe); | |
5147 | pp_div_reg = VLV_PIPE_PP_DIVISOR(pipe); | |
453c5420 | 5148 | } |
67a54566 DV |
5149 | |
5150 | /* Workaround: Need to write PP_CONTROL with the unlock key as | |
5151 | * the very first thing. */ | |
b0a08bec | 5152 | pp_ctl = ironlake_get_pp_control(intel_dp); |
67a54566 | 5153 | |
453c5420 JB |
5154 | pp_on = I915_READ(pp_on_reg); |
5155 | pp_off = I915_READ(pp_off_reg); | |
b0a08bec VK |
5156 | if (!IS_BROXTON(dev)) { |
5157 | I915_WRITE(pp_ctrl_reg, pp_ctl); | |
5158 | pp_div = I915_READ(pp_div_reg); | |
5159 | } | |
67a54566 DV |
5160 | |
5161 | /* Pull timing values out of registers */ | |
5162 | cur.t1_t3 = (pp_on & PANEL_POWER_UP_DELAY_MASK) >> | |
5163 | PANEL_POWER_UP_DELAY_SHIFT; | |
5164 | ||
5165 | cur.t8 = (pp_on & PANEL_LIGHT_ON_DELAY_MASK) >> | |
5166 | PANEL_LIGHT_ON_DELAY_SHIFT; | |
5167 | ||
5168 | cur.t9 = (pp_off & PANEL_LIGHT_OFF_DELAY_MASK) >> | |
5169 | PANEL_LIGHT_OFF_DELAY_SHIFT; | |
5170 | ||
5171 | cur.t10 = (pp_off & PANEL_POWER_DOWN_DELAY_MASK) >> | |
5172 | PANEL_POWER_DOWN_DELAY_SHIFT; | |
5173 | ||
b0a08bec VK |
5174 | if (IS_BROXTON(dev)) { |
5175 | u16 tmp = (pp_ctl & BXT_POWER_CYCLE_DELAY_MASK) >> | |
5176 | BXT_POWER_CYCLE_DELAY_SHIFT; | |
5177 | if (tmp > 0) | |
5178 | cur.t11_t12 = (tmp - 1) * 1000; | |
5179 | else | |
5180 | cur.t11_t12 = 0; | |
5181 | } else { | |
5182 | cur.t11_t12 = ((pp_div & PANEL_POWER_CYCLE_DELAY_MASK) >> | |
67a54566 | 5183 | PANEL_POWER_CYCLE_DELAY_SHIFT) * 1000; |
b0a08bec | 5184 | } |
67a54566 DV |
5185 | |
5186 | DRM_DEBUG_KMS("cur t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n", | |
5187 | cur.t1_t3, cur.t8, cur.t9, cur.t10, cur.t11_t12); | |
5188 | ||
6aa23e65 | 5189 | vbt = dev_priv->vbt.edp.pps; |
67a54566 DV |
5190 | |
5191 | /* Upper limits from eDP 1.3 spec. Note that we use the clunky units of | |
5192 | * our hw here, which are all in 100usec. */ | |
5193 | spec.t1_t3 = 210 * 10; | |
5194 | spec.t8 = 50 * 10; /* no limit for t8, use t7 instead */ | |
5195 | spec.t9 = 50 * 10; /* no limit for t9, make it symmetric with t8 */ | |
5196 | spec.t10 = 500 * 10; | |
5197 | /* This one is special and actually in units of 100ms, but zero | |
5198 | * based in the hw (so we need to add 100 ms). But the sw vbt | |
5199 | * table multiplies it with 1000 to make it in units of 100usec, | |
5200 | * too. */ | |
5201 | spec.t11_t12 = (510 + 100) * 10; | |
5202 | ||
5203 | DRM_DEBUG_KMS("vbt t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n", | |
5204 | vbt.t1_t3, vbt.t8, vbt.t9, vbt.t10, vbt.t11_t12); | |
5205 | ||
5206 | /* Use the max of the register settings and vbt. If both are | |
5207 | * unset, fall back to the spec limits. */ | |
36b5f425 | 5208 | #define assign_final(field) final->field = (max(cur.field, vbt.field) == 0 ? \ |
67a54566 DV |
5209 | spec.field : \ |
5210 | max(cur.field, vbt.field)) | |
5211 | assign_final(t1_t3); | |
5212 | assign_final(t8); | |
5213 | assign_final(t9); | |
5214 | assign_final(t10); | |
5215 | assign_final(t11_t12); | |
5216 | #undef assign_final | |
5217 | ||
36b5f425 | 5218 | #define get_delay(field) (DIV_ROUND_UP(final->field, 10)) |
67a54566 DV |
5219 | intel_dp->panel_power_up_delay = get_delay(t1_t3); |
5220 | intel_dp->backlight_on_delay = get_delay(t8); | |
5221 | intel_dp->backlight_off_delay = get_delay(t9); | |
5222 | intel_dp->panel_power_down_delay = get_delay(t10); | |
5223 | intel_dp->panel_power_cycle_delay = get_delay(t11_t12); | |
5224 | #undef get_delay | |
5225 | ||
f30d26e4 JN |
5226 | DRM_DEBUG_KMS("panel power up delay %d, power down delay %d, power cycle delay %d\n", |
5227 | intel_dp->panel_power_up_delay, intel_dp->panel_power_down_delay, | |
5228 | intel_dp->panel_power_cycle_delay); | |
5229 | ||
5230 | DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n", | |
5231 | intel_dp->backlight_on_delay, intel_dp->backlight_off_delay); | |
f30d26e4 JN |
5232 | } |
5233 | ||
5234 | static void | |
5235 | intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev, | |
36b5f425 | 5236 | struct intel_dp *intel_dp) |
f30d26e4 JN |
5237 | { |
5238 | struct drm_i915_private *dev_priv = dev->dev_private; | |
453c5420 | 5239 | u32 pp_on, pp_off, pp_div, port_sel = 0; |
e7dc33f3 | 5240 | int div = dev_priv->rawclk_freq / 1000; |
f0f59a00 | 5241 | i915_reg_t pp_on_reg, pp_off_reg, pp_div_reg, pp_ctrl_reg; |
ad933b56 | 5242 | enum port port = dp_to_dig_port(intel_dp)->port; |
36b5f425 | 5243 | const struct edp_power_seq *seq = &intel_dp->pps_delays; |
453c5420 | 5244 | |
e39b999a | 5245 | lockdep_assert_held(&dev_priv->pps_mutex); |
453c5420 | 5246 | |
b0a08bec VK |
5247 | if (IS_BROXTON(dev)) { |
5248 | /* | |
5249 | * TODO: BXT has 2 sets of PPS registers. | |
5250 | * Correct Register for Broxton need to be identified | |
5251 | * using VBT. hardcoding for now | |
5252 | */ | |
5253 | pp_ctrl_reg = BXT_PP_CONTROL(0); | |
5254 | pp_on_reg = BXT_PP_ON_DELAYS(0); | |
5255 | pp_off_reg = BXT_PP_OFF_DELAYS(0); | |
5256 | ||
5257 | } else if (HAS_PCH_SPLIT(dev)) { | |
453c5420 JB |
5258 | pp_on_reg = PCH_PP_ON_DELAYS; |
5259 | pp_off_reg = PCH_PP_OFF_DELAYS; | |
5260 | pp_div_reg = PCH_PP_DIVISOR; | |
5261 | } else { | |
bf13e81b JN |
5262 | enum pipe pipe = vlv_power_sequencer_pipe(intel_dp); |
5263 | ||
5264 | pp_on_reg = VLV_PIPE_PP_ON_DELAYS(pipe); | |
5265 | pp_off_reg = VLV_PIPE_PP_OFF_DELAYS(pipe); | |
5266 | pp_div_reg = VLV_PIPE_PP_DIVISOR(pipe); | |
453c5420 JB |
5267 | } |
5268 | ||
b2f19d1a PZ |
5269 | /* |
5270 | * And finally store the new values in the power sequencer. The | |
5271 | * backlight delays are set to 1 because we do manual waits on them. For | |
5272 | * T8, even BSpec recommends doing it. For T9, if we don't do this, | |
5273 | * we'll end up waiting for the backlight off delay twice: once when we | |
5274 | * do the manual sleep, and once when we disable the panel and wait for | |
5275 | * the PP_STATUS bit to become zero. | |
5276 | */ | |
f30d26e4 | 5277 | pp_on = (seq->t1_t3 << PANEL_POWER_UP_DELAY_SHIFT) | |
b2f19d1a PZ |
5278 | (1 << PANEL_LIGHT_ON_DELAY_SHIFT); |
5279 | pp_off = (1 << PANEL_LIGHT_OFF_DELAY_SHIFT) | | |
f30d26e4 | 5280 | (seq->t10 << PANEL_POWER_DOWN_DELAY_SHIFT); |
67a54566 DV |
5281 | /* Compute the divisor for the pp clock, simply match the Bspec |
5282 | * formula. */ | |
b0a08bec VK |
5283 | if (IS_BROXTON(dev)) { |
5284 | pp_div = I915_READ(pp_ctrl_reg); | |
5285 | pp_div &= ~BXT_POWER_CYCLE_DELAY_MASK; | |
5286 | pp_div |= (DIV_ROUND_UP((seq->t11_t12 + 1), 1000) | |
5287 | << BXT_POWER_CYCLE_DELAY_SHIFT); | |
5288 | } else { | |
5289 | pp_div = ((100 * div)/2 - 1) << PP_REFERENCE_DIVIDER_SHIFT; | |
5290 | pp_div |= (DIV_ROUND_UP(seq->t11_t12, 1000) | |
5291 | << PANEL_POWER_CYCLE_DELAY_SHIFT); | |
5292 | } | |
67a54566 DV |
5293 | |
5294 | /* Haswell doesn't have any port selection bits for the panel | |
5295 | * power sequencer any more. */ | |
666a4537 | 5296 | if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) { |
ad933b56 | 5297 | port_sel = PANEL_PORT_SELECT_VLV(port); |
bc7d38a4 | 5298 | } else if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) { |
ad933b56 | 5299 | if (port == PORT_A) |
a24c144c | 5300 | port_sel = PANEL_PORT_SELECT_DPA; |
67a54566 | 5301 | else |
a24c144c | 5302 | port_sel = PANEL_PORT_SELECT_DPD; |
67a54566 DV |
5303 | } |
5304 | ||
453c5420 JB |
5305 | pp_on |= port_sel; |
5306 | ||
5307 | I915_WRITE(pp_on_reg, pp_on); | |
5308 | I915_WRITE(pp_off_reg, pp_off); | |
b0a08bec VK |
5309 | if (IS_BROXTON(dev)) |
5310 | I915_WRITE(pp_ctrl_reg, pp_div); | |
5311 | else | |
5312 | I915_WRITE(pp_div_reg, pp_div); | |
67a54566 | 5313 | |
67a54566 | 5314 | DRM_DEBUG_KMS("panel power sequencer register settings: PP_ON %#x, PP_OFF %#x, PP_DIV %#x\n", |
453c5420 JB |
5315 | I915_READ(pp_on_reg), |
5316 | I915_READ(pp_off_reg), | |
b0a08bec VK |
5317 | IS_BROXTON(dev) ? |
5318 | (I915_READ(pp_ctrl_reg) & BXT_POWER_CYCLE_DELAY_MASK) : | |
453c5420 | 5319 | I915_READ(pp_div_reg)); |
f684960e CW |
5320 | } |
5321 | ||
b33a2815 VK |
5322 | /** |
5323 | * intel_dp_set_drrs_state - program registers for RR switch to take effect | |
5324 | * @dev: DRM device | |
5325 | * @refresh_rate: RR to be programmed | |
5326 | * | |
5327 | * This function gets called when refresh rate (RR) has to be changed from | |
5328 | * one frequency to another. Switches can be between high and low RR | |
5329 | * supported by the panel or to any other RR based on media playback (in | |
5330 | * this case, RR value needs to be passed from user space). | |
5331 | * | |
5332 | * The caller of this function needs to take a lock on dev_priv->drrs. | |
5333 | */ | |
96178eeb | 5334 | static void intel_dp_set_drrs_state(struct drm_device *dev, int refresh_rate) |
439d7ac0 PB |
5335 | { |
5336 | struct drm_i915_private *dev_priv = dev->dev_private; | |
5337 | struct intel_encoder *encoder; | |
96178eeb VK |
5338 | struct intel_digital_port *dig_port = NULL; |
5339 | struct intel_dp *intel_dp = dev_priv->drrs.dp; | |
5cec258b | 5340 | struct intel_crtc_state *config = NULL; |
439d7ac0 | 5341 | struct intel_crtc *intel_crtc = NULL; |
96178eeb | 5342 | enum drrs_refresh_rate_type index = DRRS_HIGH_RR; |
439d7ac0 PB |
5343 | |
5344 | if (refresh_rate <= 0) { | |
5345 | DRM_DEBUG_KMS("Refresh rate should be positive non-zero.\n"); | |
5346 | return; | |
5347 | } | |
5348 | ||
96178eeb VK |
5349 | if (intel_dp == NULL) { |
5350 | DRM_DEBUG_KMS("DRRS not supported.\n"); | |
439d7ac0 PB |
5351 | return; |
5352 | } | |
5353 | ||
1fcc9d1c | 5354 | /* |
e4d59f6b RV |
5355 | * FIXME: This needs proper synchronization with psr state for some |
5356 | * platforms that cannot have PSR and DRRS enabled at the same time. | |
1fcc9d1c | 5357 | */ |
439d7ac0 | 5358 | |
96178eeb VK |
5359 | dig_port = dp_to_dig_port(intel_dp); |
5360 | encoder = &dig_port->base; | |
723f9aab | 5361 | intel_crtc = to_intel_crtc(encoder->base.crtc); |
439d7ac0 PB |
5362 | |
5363 | if (!intel_crtc) { | |
5364 | DRM_DEBUG_KMS("DRRS: intel_crtc not initialized\n"); | |
5365 | return; | |
5366 | } | |
5367 | ||
6e3c9717 | 5368 | config = intel_crtc->config; |
439d7ac0 | 5369 | |
96178eeb | 5370 | if (dev_priv->drrs.type < SEAMLESS_DRRS_SUPPORT) { |
439d7ac0 PB |
5371 | DRM_DEBUG_KMS("Only Seamless DRRS supported.\n"); |
5372 | return; | |
5373 | } | |
5374 | ||
96178eeb VK |
5375 | if (intel_dp->attached_connector->panel.downclock_mode->vrefresh == |
5376 | refresh_rate) | |
439d7ac0 PB |
5377 | index = DRRS_LOW_RR; |
5378 | ||
96178eeb | 5379 | if (index == dev_priv->drrs.refresh_rate_type) { |
439d7ac0 PB |
5380 | DRM_DEBUG_KMS( |
5381 | "DRRS requested for previously set RR...ignoring\n"); | |
5382 | return; | |
5383 | } | |
5384 | ||
5385 | if (!intel_crtc->active) { | |
5386 | DRM_DEBUG_KMS("eDP encoder disabled. CRTC not Active\n"); | |
5387 | return; | |
5388 | } | |
5389 | ||
44395bfe | 5390 | if (INTEL_INFO(dev)->gen >= 8 && !IS_CHERRYVIEW(dev)) { |
a4c30b1d VK |
5391 | switch (index) { |
5392 | case DRRS_HIGH_RR: | |
5393 | intel_dp_set_m_n(intel_crtc, M1_N1); | |
5394 | break; | |
5395 | case DRRS_LOW_RR: | |
5396 | intel_dp_set_m_n(intel_crtc, M2_N2); | |
5397 | break; | |
5398 | case DRRS_MAX_RR: | |
5399 | default: | |
5400 | DRM_ERROR("Unsupported refreshrate type\n"); | |
5401 | } | |
5402 | } else if (INTEL_INFO(dev)->gen > 6) { | |
f0f59a00 | 5403 | i915_reg_t reg = PIPECONF(intel_crtc->config->cpu_transcoder); |
649636ef | 5404 | u32 val; |
a4c30b1d | 5405 | |
649636ef | 5406 | val = I915_READ(reg); |
439d7ac0 | 5407 | if (index > DRRS_HIGH_RR) { |
666a4537 | 5408 | if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) |
6fa7aec1 VK |
5409 | val |= PIPECONF_EDP_RR_MODE_SWITCH_VLV; |
5410 | else | |
5411 | val |= PIPECONF_EDP_RR_MODE_SWITCH; | |
439d7ac0 | 5412 | } else { |
666a4537 | 5413 | if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) |
6fa7aec1 VK |
5414 | val &= ~PIPECONF_EDP_RR_MODE_SWITCH_VLV; |
5415 | else | |
5416 | val &= ~PIPECONF_EDP_RR_MODE_SWITCH; | |
439d7ac0 PB |
5417 | } |
5418 | I915_WRITE(reg, val); | |
5419 | } | |
5420 | ||
4e9ac947 VK |
5421 | dev_priv->drrs.refresh_rate_type = index; |
5422 | ||
5423 | DRM_DEBUG_KMS("eDP Refresh Rate set to : %dHz\n", refresh_rate); | |
5424 | } | |
5425 | ||
b33a2815 VK |
5426 | /** |
5427 | * intel_edp_drrs_enable - init drrs struct if supported | |
5428 | * @intel_dp: DP struct | |
5429 | * | |
5430 | * Initializes frontbuffer_bits and drrs.dp | |
5431 | */ | |
c395578e VK |
5432 | void intel_edp_drrs_enable(struct intel_dp *intel_dp) |
5433 | { | |
5434 | struct drm_device *dev = intel_dp_to_dev(intel_dp); | |
5435 | struct drm_i915_private *dev_priv = dev->dev_private; | |
5436 | struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); | |
5437 | struct drm_crtc *crtc = dig_port->base.base.crtc; | |
5438 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); | |
5439 | ||
5440 | if (!intel_crtc->config->has_drrs) { | |
5441 | DRM_DEBUG_KMS("Panel doesn't support DRRS\n"); | |
5442 | return; | |
5443 | } | |
5444 | ||
5445 | mutex_lock(&dev_priv->drrs.mutex); | |
5446 | if (WARN_ON(dev_priv->drrs.dp)) { | |
5447 | DRM_ERROR("DRRS already enabled\n"); | |
5448 | goto unlock; | |
5449 | } | |
5450 | ||
5451 | dev_priv->drrs.busy_frontbuffer_bits = 0; | |
5452 | ||
5453 | dev_priv->drrs.dp = intel_dp; | |
5454 | ||
5455 | unlock: | |
5456 | mutex_unlock(&dev_priv->drrs.mutex); | |
5457 | } | |
5458 | ||
b33a2815 VK |
5459 | /** |
5460 | * intel_edp_drrs_disable - Disable DRRS | |
5461 | * @intel_dp: DP struct | |
5462 | * | |
5463 | */ | |
c395578e VK |
5464 | void intel_edp_drrs_disable(struct intel_dp *intel_dp) |
5465 | { | |
5466 | struct drm_device *dev = intel_dp_to_dev(intel_dp); | |
5467 | struct drm_i915_private *dev_priv = dev->dev_private; | |
5468 | struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); | |
5469 | struct drm_crtc *crtc = dig_port->base.base.crtc; | |
5470 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); | |
5471 | ||
5472 | if (!intel_crtc->config->has_drrs) | |
5473 | return; | |
5474 | ||
5475 | mutex_lock(&dev_priv->drrs.mutex); | |
5476 | if (!dev_priv->drrs.dp) { | |
5477 | mutex_unlock(&dev_priv->drrs.mutex); | |
5478 | return; | |
5479 | } | |
5480 | ||
5481 | if (dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR) | |
5482 | intel_dp_set_drrs_state(dev_priv->dev, | |
5483 | intel_dp->attached_connector->panel. | |
5484 | fixed_mode->vrefresh); | |
5485 | ||
5486 | dev_priv->drrs.dp = NULL; | |
5487 | mutex_unlock(&dev_priv->drrs.mutex); | |
5488 | ||
5489 | cancel_delayed_work_sync(&dev_priv->drrs.work); | |
5490 | } | |
5491 | ||
4e9ac947 VK |
5492 | static void intel_edp_drrs_downclock_work(struct work_struct *work) |
5493 | { | |
5494 | struct drm_i915_private *dev_priv = | |
5495 | container_of(work, typeof(*dev_priv), drrs.work.work); | |
5496 | struct intel_dp *intel_dp; | |
5497 | ||
5498 | mutex_lock(&dev_priv->drrs.mutex); | |
5499 | ||
5500 | intel_dp = dev_priv->drrs.dp; | |
5501 | ||
5502 | if (!intel_dp) | |
5503 | goto unlock; | |
5504 | ||
439d7ac0 | 5505 | /* |
4e9ac947 VK |
5506 | * The delayed work can race with an invalidate hence we need to |
5507 | * recheck. | |
439d7ac0 PB |
5508 | */ |
5509 | ||
4e9ac947 VK |
5510 | if (dev_priv->drrs.busy_frontbuffer_bits) |
5511 | goto unlock; | |
439d7ac0 | 5512 | |
4e9ac947 VK |
5513 | if (dev_priv->drrs.refresh_rate_type != DRRS_LOW_RR) |
5514 | intel_dp_set_drrs_state(dev_priv->dev, | |
5515 | intel_dp->attached_connector->panel. | |
5516 | downclock_mode->vrefresh); | |
439d7ac0 | 5517 | |
4e9ac947 | 5518 | unlock: |
4e9ac947 | 5519 | mutex_unlock(&dev_priv->drrs.mutex); |
439d7ac0 PB |
5520 | } |
5521 | ||
b33a2815 | 5522 | /** |
0ddfd203 | 5523 | * intel_edp_drrs_invalidate - Disable Idleness DRRS |
b33a2815 VK |
5524 | * @dev: DRM device |
5525 | * @frontbuffer_bits: frontbuffer plane tracking bits | |
5526 | * | |
0ddfd203 R |
5527 | * This function gets called everytime rendering on the given planes start. |
5528 | * Hence DRRS needs to be Upclocked, i.e. (LOW_RR -> HIGH_RR). | |
b33a2815 VK |
5529 | * |
5530 | * Dirty frontbuffers relevant to DRRS are tracked in busy_frontbuffer_bits. | |
5531 | */ | |
a93fad0f VK |
5532 | void intel_edp_drrs_invalidate(struct drm_device *dev, |
5533 | unsigned frontbuffer_bits) | |
5534 | { | |
5535 | struct drm_i915_private *dev_priv = dev->dev_private; | |
5536 | struct drm_crtc *crtc; | |
5537 | enum pipe pipe; | |
5538 | ||
9da7d693 | 5539 | if (dev_priv->drrs.type == DRRS_NOT_SUPPORTED) |
a93fad0f VK |
5540 | return; |
5541 | ||
88f933a8 | 5542 | cancel_delayed_work(&dev_priv->drrs.work); |
3954e733 | 5543 | |
a93fad0f | 5544 | mutex_lock(&dev_priv->drrs.mutex); |
9da7d693 DV |
5545 | if (!dev_priv->drrs.dp) { |
5546 | mutex_unlock(&dev_priv->drrs.mutex); | |
5547 | return; | |
5548 | } | |
5549 | ||
a93fad0f VK |
5550 | crtc = dp_to_dig_port(dev_priv->drrs.dp)->base.base.crtc; |
5551 | pipe = to_intel_crtc(crtc)->pipe; | |
5552 | ||
c1d038c6 DV |
5553 | frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe); |
5554 | dev_priv->drrs.busy_frontbuffer_bits |= frontbuffer_bits; | |
5555 | ||
0ddfd203 | 5556 | /* invalidate means busy screen hence upclock */ |
c1d038c6 | 5557 | if (frontbuffer_bits && dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR) |
a93fad0f VK |
5558 | intel_dp_set_drrs_state(dev_priv->dev, |
5559 | dev_priv->drrs.dp->attached_connector->panel. | |
5560 | fixed_mode->vrefresh); | |
a93fad0f | 5561 | |
a93fad0f VK |
5562 | mutex_unlock(&dev_priv->drrs.mutex); |
5563 | } | |
5564 | ||
b33a2815 | 5565 | /** |
0ddfd203 | 5566 | * intel_edp_drrs_flush - Restart Idleness DRRS |
b33a2815 VK |
5567 | * @dev: DRM device |
5568 | * @frontbuffer_bits: frontbuffer plane tracking bits | |
5569 | * | |
0ddfd203 R |
5570 | * This function gets called every time rendering on the given planes has |
5571 | * completed or flip on a crtc is completed. So DRRS should be upclocked | |
5572 | * (LOW_RR -> HIGH_RR). And also Idleness detection should be started again, | |
5573 | * if no other planes are dirty. | |
b33a2815 VK |
5574 | * |
5575 | * Dirty frontbuffers relevant to DRRS are tracked in busy_frontbuffer_bits. | |
5576 | */ | |
a93fad0f VK |
5577 | void intel_edp_drrs_flush(struct drm_device *dev, |
5578 | unsigned frontbuffer_bits) | |
5579 | { | |
5580 | struct drm_i915_private *dev_priv = dev->dev_private; | |
5581 | struct drm_crtc *crtc; | |
5582 | enum pipe pipe; | |
5583 | ||
9da7d693 | 5584 | if (dev_priv->drrs.type == DRRS_NOT_SUPPORTED) |
a93fad0f VK |
5585 | return; |
5586 | ||
88f933a8 | 5587 | cancel_delayed_work(&dev_priv->drrs.work); |
3954e733 | 5588 | |
a93fad0f | 5589 | mutex_lock(&dev_priv->drrs.mutex); |
9da7d693 DV |
5590 | if (!dev_priv->drrs.dp) { |
5591 | mutex_unlock(&dev_priv->drrs.mutex); | |
5592 | return; | |
5593 | } | |
5594 | ||
a93fad0f VK |
5595 | crtc = dp_to_dig_port(dev_priv->drrs.dp)->base.base.crtc; |
5596 | pipe = to_intel_crtc(crtc)->pipe; | |
c1d038c6 DV |
5597 | |
5598 | frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe); | |
a93fad0f VK |
5599 | dev_priv->drrs.busy_frontbuffer_bits &= ~frontbuffer_bits; |
5600 | ||
0ddfd203 | 5601 | /* flush means busy screen hence upclock */ |
c1d038c6 | 5602 | if (frontbuffer_bits && dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR) |
0ddfd203 R |
5603 | intel_dp_set_drrs_state(dev_priv->dev, |
5604 | dev_priv->drrs.dp->attached_connector->panel. | |
5605 | fixed_mode->vrefresh); | |
5606 | ||
5607 | /* | |
5608 | * flush also means no more activity hence schedule downclock, if all | |
5609 | * other fbs are quiescent too | |
5610 | */ | |
5611 | if (!dev_priv->drrs.busy_frontbuffer_bits) | |
a93fad0f VK |
5612 | schedule_delayed_work(&dev_priv->drrs.work, |
5613 | msecs_to_jiffies(1000)); | |
5614 | mutex_unlock(&dev_priv->drrs.mutex); | |
5615 | } | |
5616 | ||
b33a2815 VK |
5617 | /** |
5618 | * DOC: Display Refresh Rate Switching (DRRS) | |
5619 | * | |
5620 | * Display Refresh Rate Switching (DRRS) is a power conservation feature | |
5621 | * which enables swtching between low and high refresh rates, | |
5622 | * dynamically, based on the usage scenario. This feature is applicable | |
5623 | * for internal panels. | |
5624 | * | |
5625 | * Indication that the panel supports DRRS is given by the panel EDID, which | |
5626 | * would list multiple refresh rates for one resolution. | |
5627 | * | |
5628 | * DRRS is of 2 types - static and seamless. | |
5629 | * Static DRRS involves changing refresh rate (RR) by doing a full modeset | |
5630 | * (may appear as a blink on screen) and is used in dock-undock scenario. | |
5631 | * Seamless DRRS involves changing RR without any visual effect to the user | |
5632 | * and can be used during normal system usage. This is done by programming | |
5633 | * certain registers. | |
5634 | * | |
5635 | * Support for static/seamless DRRS may be indicated in the VBT based on | |
5636 | * inputs from the panel spec. | |
5637 | * | |
5638 | * DRRS saves power by switching to low RR based on usage scenarios. | |
5639 | * | |
5640 | * eDP DRRS:- | |
5641 | * The implementation is based on frontbuffer tracking implementation. | |
5642 | * When there is a disturbance on the screen triggered by user activity or a | |
5643 | * periodic system activity, DRRS is disabled (RR is changed to high RR). | |
5644 | * When there is no movement on screen, after a timeout of 1 second, a switch | |
5645 | * to low RR is made. | |
5646 | * For integration with frontbuffer tracking code, | |
5647 | * intel_edp_drrs_invalidate() and intel_edp_drrs_flush() are called. | |
5648 | * | |
5649 | * DRRS can be further extended to support other internal panels and also | |
5650 | * the scenario of video playback wherein RR is set based on the rate | |
5651 | * requested by userspace. | |
5652 | */ | |
5653 | ||
5654 | /** | |
5655 | * intel_dp_drrs_init - Init basic DRRS work and mutex. | |
5656 | * @intel_connector: eDP connector | |
5657 | * @fixed_mode: preferred mode of panel | |
5658 | * | |
5659 | * This function is called only once at driver load to initialize basic | |
5660 | * DRRS stuff. | |
5661 | * | |
5662 | * Returns: | |
5663 | * Downclock mode if panel supports it, else return NULL. | |
5664 | * DRRS support is determined by the presence of downclock mode (apart | |
5665 | * from VBT setting). | |
5666 | */ | |
4f9db5b5 | 5667 | static struct drm_display_mode * |
96178eeb VK |
5668 | intel_dp_drrs_init(struct intel_connector *intel_connector, |
5669 | struct drm_display_mode *fixed_mode) | |
4f9db5b5 PB |
5670 | { |
5671 | struct drm_connector *connector = &intel_connector->base; | |
96178eeb | 5672 | struct drm_device *dev = connector->dev; |
4f9db5b5 PB |
5673 | struct drm_i915_private *dev_priv = dev->dev_private; |
5674 | struct drm_display_mode *downclock_mode = NULL; | |
5675 | ||
9da7d693 DV |
5676 | INIT_DELAYED_WORK(&dev_priv->drrs.work, intel_edp_drrs_downclock_work); |
5677 | mutex_init(&dev_priv->drrs.mutex); | |
5678 | ||
4f9db5b5 PB |
5679 | if (INTEL_INFO(dev)->gen <= 6) { |
5680 | DRM_DEBUG_KMS("DRRS supported for Gen7 and above\n"); | |
5681 | return NULL; | |
5682 | } | |
5683 | ||
5684 | if (dev_priv->vbt.drrs_type != SEAMLESS_DRRS_SUPPORT) { | |
4079b8d1 | 5685 | DRM_DEBUG_KMS("VBT doesn't support DRRS\n"); |
4f9db5b5 PB |
5686 | return NULL; |
5687 | } | |
5688 | ||
5689 | downclock_mode = intel_find_panel_downclock | |
5690 | (dev, fixed_mode, connector); | |
5691 | ||
5692 | if (!downclock_mode) { | |
a1d26342 | 5693 | DRM_DEBUG_KMS("Downclock mode is not found. DRRS not supported\n"); |
4f9db5b5 PB |
5694 | return NULL; |
5695 | } | |
5696 | ||
96178eeb | 5697 | dev_priv->drrs.type = dev_priv->vbt.drrs_type; |
4f9db5b5 | 5698 | |
96178eeb | 5699 | dev_priv->drrs.refresh_rate_type = DRRS_HIGH_RR; |
4079b8d1 | 5700 | DRM_DEBUG_KMS("seamless DRRS supported for eDP panel.\n"); |
4f9db5b5 PB |
5701 | return downclock_mode; |
5702 | } | |
5703 | ||
ed92f0b2 | 5704 | static bool intel_edp_init_connector(struct intel_dp *intel_dp, |
36b5f425 | 5705 | struct intel_connector *intel_connector) |
ed92f0b2 PZ |
5706 | { |
5707 | struct drm_connector *connector = &intel_connector->base; | |
5708 | struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); | |
63635217 PZ |
5709 | struct intel_encoder *intel_encoder = &intel_dig_port->base; |
5710 | struct drm_device *dev = intel_encoder->base.dev; | |
ed92f0b2 PZ |
5711 | struct drm_i915_private *dev_priv = dev->dev_private; |
5712 | struct drm_display_mode *fixed_mode = NULL; | |
4f9db5b5 | 5713 | struct drm_display_mode *downclock_mode = NULL; |
ed92f0b2 PZ |
5714 | bool has_dpcd; |
5715 | struct drm_display_mode *scan; | |
5716 | struct edid *edid; | |
6517d273 | 5717 | enum pipe pipe = INVALID_PIPE; |
ed92f0b2 PZ |
5718 | |
5719 | if (!is_edp(intel_dp)) | |
5720 | return true; | |
5721 | ||
49e6bc51 VS |
5722 | pps_lock(intel_dp); |
5723 | intel_edp_panel_vdd_sanitize(intel_dp); | |
5724 | pps_unlock(intel_dp); | |
63635217 | 5725 | |
ed92f0b2 | 5726 | /* Cache DPCD and EDID for edp. */ |
ed92f0b2 | 5727 | has_dpcd = intel_dp_get_dpcd(intel_dp); |
ed92f0b2 PZ |
5728 | |
5729 | if (has_dpcd) { | |
5730 | if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) | |
5731 | dev_priv->no_aux_handshake = | |
5732 | intel_dp->dpcd[DP_MAX_DOWNSPREAD] & | |
5733 | DP_NO_AUX_HANDSHAKE_LINK_TRAINING; | |
5734 | } else { | |
5735 | /* if this fails, presume the device is a ghost */ | |
5736 | DRM_INFO("failed to retrieve link info, disabling eDP\n"); | |
ed92f0b2 PZ |
5737 | return false; |
5738 | } | |
5739 | ||
5740 | /* We now know it's not a ghost, init power sequence regs. */ | |
773538e8 | 5741 | pps_lock(intel_dp); |
36b5f425 | 5742 | intel_dp_init_panel_power_sequencer_registers(dev, intel_dp); |
773538e8 | 5743 | pps_unlock(intel_dp); |
ed92f0b2 | 5744 | |
060c8778 | 5745 | mutex_lock(&dev->mode_config.mutex); |
0b99836f | 5746 | edid = drm_get_edid(connector, &intel_dp->aux.ddc); |
ed92f0b2 PZ |
5747 | if (edid) { |
5748 | if (drm_add_edid_modes(connector, edid)) { | |
5749 | drm_mode_connector_update_edid_property(connector, | |
5750 | edid); | |
5751 | drm_edid_to_eld(connector, edid); | |
5752 | } else { | |
5753 | kfree(edid); | |
5754 | edid = ERR_PTR(-EINVAL); | |
5755 | } | |
5756 | } else { | |
5757 | edid = ERR_PTR(-ENOENT); | |
5758 | } | |
5759 | intel_connector->edid = edid; | |
5760 | ||
5761 | /* prefer fixed mode from EDID if available */ | |
5762 | list_for_each_entry(scan, &connector->probed_modes, head) { | |
5763 | if ((scan->type & DRM_MODE_TYPE_PREFERRED)) { | |
5764 | fixed_mode = drm_mode_duplicate(dev, scan); | |
4f9db5b5 | 5765 | downclock_mode = intel_dp_drrs_init( |
4f9db5b5 | 5766 | intel_connector, fixed_mode); |
ed92f0b2 PZ |
5767 | break; |
5768 | } | |
5769 | } | |
5770 | ||
5771 | /* fallback to VBT if available for eDP */ | |
5772 | if (!fixed_mode && dev_priv->vbt.lfp_lvds_vbt_mode) { | |
5773 | fixed_mode = drm_mode_duplicate(dev, | |
5774 | dev_priv->vbt.lfp_lvds_vbt_mode); | |
5775 | if (fixed_mode) | |
5776 | fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; | |
5777 | } | |
060c8778 | 5778 | mutex_unlock(&dev->mode_config.mutex); |
ed92f0b2 | 5779 | |
666a4537 | 5780 | if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) { |
01527b31 CT |
5781 | intel_dp->edp_notifier.notifier_call = edp_notify_handler; |
5782 | register_reboot_notifier(&intel_dp->edp_notifier); | |
6517d273 VS |
5783 | |
5784 | /* | |
5785 | * Figure out the current pipe for the initial backlight setup. | |
5786 | * If the current pipe isn't valid, try the PPS pipe, and if that | |
5787 | * fails just assume pipe A. | |
5788 | */ | |
5789 | if (IS_CHERRYVIEW(dev)) | |
5790 | pipe = DP_PORT_TO_PIPE_CHV(intel_dp->DP); | |
5791 | else | |
5792 | pipe = PORT_TO_PIPE(intel_dp->DP); | |
5793 | ||
5794 | if (pipe != PIPE_A && pipe != PIPE_B) | |
5795 | pipe = intel_dp->pps_pipe; | |
5796 | ||
5797 | if (pipe != PIPE_A && pipe != PIPE_B) | |
5798 | pipe = PIPE_A; | |
5799 | ||
5800 | DRM_DEBUG_KMS("using pipe %c for initial backlight setup\n", | |
5801 | pipe_name(pipe)); | |
01527b31 CT |
5802 | } |
5803 | ||
4f9db5b5 | 5804 | intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode); |
5507faeb | 5805 | intel_connector->panel.backlight.power = intel_edp_backlight_power; |
6517d273 | 5806 | intel_panel_setup_backlight(connector, pipe); |
ed92f0b2 PZ |
5807 | |
5808 | return true; | |
5809 | } | |
5810 | ||
16c25533 | 5811 | bool |
f0fec3f2 PZ |
5812 | intel_dp_init_connector(struct intel_digital_port *intel_dig_port, |
5813 | struct intel_connector *intel_connector) | |
a4fc5ed6 | 5814 | { |
f0fec3f2 PZ |
5815 | struct drm_connector *connector = &intel_connector->base; |
5816 | struct intel_dp *intel_dp = &intel_dig_port->dp; | |
5817 | struct intel_encoder *intel_encoder = &intel_dig_port->base; | |
5818 | struct drm_device *dev = intel_encoder->base.dev; | |
a4fc5ed6 | 5819 | struct drm_i915_private *dev_priv = dev->dev_private; |
174edf1f | 5820 | enum port port = intel_dig_port->port; |
a121f4e5 | 5821 | int type, ret; |
a4fc5ed6 | 5822 | |
ccb1a831 VS |
5823 | if (WARN(intel_dig_port->max_lanes < 1, |
5824 | "Not enough lanes (%d) for DP on port %c\n", | |
5825 | intel_dig_port->max_lanes, port_name(port))) | |
5826 | return false; | |
5827 | ||
a4a5d2f8 VS |
5828 | intel_dp->pps_pipe = INVALID_PIPE; |
5829 | ||
ec5b01dd | 5830 | /* intel_dp vfuncs */ |
b6b5e383 DL |
5831 | if (INTEL_INFO(dev)->gen >= 9) |
5832 | intel_dp->get_aux_clock_divider = skl_get_aux_clock_divider; | |
ec5b01dd DL |
5833 | else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) |
5834 | intel_dp->get_aux_clock_divider = hsw_get_aux_clock_divider; | |
5835 | else if (HAS_PCH_SPLIT(dev)) | |
5836 | intel_dp->get_aux_clock_divider = ilk_get_aux_clock_divider; | |
5837 | else | |
6ffb1be7 | 5838 | intel_dp->get_aux_clock_divider = g4x_get_aux_clock_divider; |
ec5b01dd | 5839 | |
b9ca5fad DL |
5840 | if (INTEL_INFO(dev)->gen >= 9) |
5841 | intel_dp->get_aux_send_ctl = skl_get_aux_send_ctl; | |
5842 | else | |
6ffb1be7 | 5843 | intel_dp->get_aux_send_ctl = g4x_get_aux_send_ctl; |
153b1100 | 5844 | |
ad64217b ACO |
5845 | if (HAS_DDI(dev)) |
5846 | intel_dp->prepare_link_retrain = intel_ddi_prepare_link_retrain; | |
5847 | ||
0767935e DV |
5848 | /* Preserve the current hw state. */ |
5849 | intel_dp->DP = I915_READ(intel_dp->output_reg); | |
dd06f90e | 5850 | intel_dp->attached_connector = intel_connector; |
3d3dc149 | 5851 | |
3b32a35b | 5852 | if (intel_dp_is_edp(dev, port)) |
b329530c | 5853 | type = DRM_MODE_CONNECTOR_eDP; |
3b32a35b VS |
5854 | else |
5855 | type = DRM_MODE_CONNECTOR_DisplayPort; | |
b329530c | 5856 | |
f7d24902 ID |
5857 | /* |
5858 | * For eDP we always set the encoder type to INTEL_OUTPUT_EDP, but | |
5859 | * for DP the encoder type can be set by the caller to | |
5860 | * INTEL_OUTPUT_UNKNOWN for DDI, so don't rewrite it. | |
5861 | */ | |
5862 | if (type == DRM_MODE_CONNECTOR_eDP) | |
5863 | intel_encoder->type = INTEL_OUTPUT_EDP; | |
5864 | ||
c17ed5b5 | 5865 | /* eDP only on port B and/or C on vlv/chv */ |
666a4537 WB |
5866 | if (WARN_ON((IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) && |
5867 | is_edp(intel_dp) && port != PORT_B && port != PORT_C)) | |
c17ed5b5 VS |
5868 | return false; |
5869 | ||
e7281eab ID |
5870 | DRM_DEBUG_KMS("Adding %s connector on port %c\n", |
5871 | type == DRM_MODE_CONNECTOR_eDP ? "eDP" : "DP", | |
5872 | port_name(port)); | |
5873 | ||
b329530c | 5874 | drm_connector_init(dev, connector, &intel_dp_connector_funcs, type); |
a4fc5ed6 KP |
5875 | drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs); |
5876 | ||
a4fc5ed6 KP |
5877 | connector->interlace_allowed = true; |
5878 | connector->doublescan_allowed = 0; | |
5879 | ||
f0fec3f2 | 5880 | INIT_DELAYED_WORK(&intel_dp->panel_vdd_work, |
4be73780 | 5881 | edp_panel_vdd_work); |
a4fc5ed6 | 5882 | |
df0e9248 | 5883 | intel_connector_attach_encoder(intel_connector, intel_encoder); |
34ea3d38 | 5884 | drm_connector_register(connector); |
a4fc5ed6 | 5885 | |
affa9354 | 5886 | if (HAS_DDI(dev)) |
bcbc889b PZ |
5887 | intel_connector->get_hw_state = intel_ddi_connector_get_hw_state; |
5888 | else | |
5889 | intel_connector->get_hw_state = intel_connector_get_hw_state; | |
80f65de3 | 5890 | intel_connector->unregister = intel_dp_connector_unregister; |
bcbc889b | 5891 | |
0b99836f | 5892 | /* Set up the hotplug pin. */ |
ab9d7c30 PZ |
5893 | switch (port) { |
5894 | case PORT_A: | |
1d843f9d | 5895 | intel_encoder->hpd_pin = HPD_PORT_A; |
ab9d7c30 PZ |
5896 | break; |
5897 | case PORT_B: | |
1d843f9d | 5898 | intel_encoder->hpd_pin = HPD_PORT_B; |
e87a005d | 5899 | if (IS_BXT_REVID(dev, 0, BXT_REVID_A1)) |
cf1d5883 | 5900 | intel_encoder->hpd_pin = HPD_PORT_A; |
ab9d7c30 PZ |
5901 | break; |
5902 | case PORT_C: | |
1d843f9d | 5903 | intel_encoder->hpd_pin = HPD_PORT_C; |
ab9d7c30 PZ |
5904 | break; |
5905 | case PORT_D: | |
1d843f9d | 5906 | intel_encoder->hpd_pin = HPD_PORT_D; |
ab9d7c30 | 5907 | break; |
26951caf XZ |
5908 | case PORT_E: |
5909 | intel_encoder->hpd_pin = HPD_PORT_E; | |
5910 | break; | |
ab9d7c30 | 5911 | default: |
ad1c0b19 | 5912 | BUG(); |
5eb08b69 ZW |
5913 | } |
5914 | ||
dada1a9f | 5915 | if (is_edp(intel_dp)) { |
773538e8 | 5916 | pps_lock(intel_dp); |
1e74a324 | 5917 | intel_dp_init_panel_power_timestamps(intel_dp); |
666a4537 | 5918 | if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) |
a4a5d2f8 | 5919 | vlv_initial_power_sequencer_setup(intel_dp); |
1e74a324 | 5920 | else |
36b5f425 | 5921 | intel_dp_init_panel_power_sequencer(dev, intel_dp); |
773538e8 | 5922 | pps_unlock(intel_dp); |
dada1a9f | 5923 | } |
0095e6dc | 5924 | |
a121f4e5 VS |
5925 | ret = intel_dp_aux_init(intel_dp, intel_connector); |
5926 | if (ret) | |
5927 | goto fail; | |
c1f05264 | 5928 | |
0e32b39c | 5929 | /* init MST on ports that can support it */ |
0c9b3715 JN |
5930 | if (HAS_DP_MST(dev) && |
5931 | (port == PORT_B || port == PORT_C || port == PORT_D)) | |
5932 | intel_dp_mst_encoder_init(intel_dig_port, | |
5933 | intel_connector->base.base.id); | |
0e32b39c | 5934 | |
36b5f425 | 5935 | if (!intel_edp_init_connector(intel_dp, intel_connector)) { |
a121f4e5 VS |
5936 | intel_dp_aux_fini(intel_dp); |
5937 | intel_dp_mst_encoder_cleanup(intel_dig_port); | |
5938 | goto fail; | |
b2f246a8 | 5939 | } |
32f9d658 | 5940 | |
f684960e CW |
5941 | intel_dp_add_properties(intel_dp, connector); |
5942 | ||
a4fc5ed6 KP |
5943 | /* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written |
5944 | * 0xd. Failure to do so will result in spurious interrupts being | |
5945 | * generated on the port when a cable is not attached. | |
5946 | */ | |
5947 | if (IS_G4X(dev) && !IS_GM45(dev)) { | |
5948 | u32 temp = I915_READ(PEG_BAND_GAP_DATA); | |
5949 | I915_WRITE(PEG_BAND_GAP_DATA, (temp & ~0xf) | 0xd); | |
5950 | } | |
16c25533 | 5951 | |
aa7471d2 JN |
5952 | i915_debugfs_connector_add(connector); |
5953 | ||
16c25533 | 5954 | return true; |
a121f4e5 VS |
5955 | |
5956 | fail: | |
5957 | if (is_edp(intel_dp)) { | |
5958 | cancel_delayed_work_sync(&intel_dp->panel_vdd_work); | |
5959 | /* | |
5960 | * vdd might still be enabled do to the delayed vdd off. | |
5961 | * Make sure vdd is actually turned off here. | |
5962 | */ | |
5963 | pps_lock(intel_dp); | |
5964 | edp_panel_vdd_off_sync(intel_dp); | |
5965 | pps_unlock(intel_dp); | |
5966 | } | |
5967 | drm_connector_unregister(connector); | |
5968 | drm_connector_cleanup(connector); | |
5969 | ||
5970 | return false; | |
a4fc5ed6 | 5971 | } |
f0fec3f2 PZ |
5972 | |
5973 | void | |
f0f59a00 VS |
5974 | intel_dp_init(struct drm_device *dev, |
5975 | i915_reg_t output_reg, enum port port) | |
f0fec3f2 | 5976 | { |
13cf5504 | 5977 | struct drm_i915_private *dev_priv = dev->dev_private; |
f0fec3f2 PZ |
5978 | struct intel_digital_port *intel_dig_port; |
5979 | struct intel_encoder *intel_encoder; | |
5980 | struct drm_encoder *encoder; | |
5981 | struct intel_connector *intel_connector; | |
5982 | ||
b14c5679 | 5983 | intel_dig_port = kzalloc(sizeof(*intel_dig_port), GFP_KERNEL); |
f0fec3f2 PZ |
5984 | if (!intel_dig_port) |
5985 | return; | |
5986 | ||
08d9bc92 | 5987 | intel_connector = intel_connector_alloc(); |
11aee0f6 SM |
5988 | if (!intel_connector) |
5989 | goto err_connector_alloc; | |
f0fec3f2 PZ |
5990 | |
5991 | intel_encoder = &intel_dig_port->base; | |
5992 | encoder = &intel_encoder->base; | |
5993 | ||
893da0c9 | 5994 | if (drm_encoder_init(dev, &intel_encoder->base, &intel_dp_enc_funcs, |
ade1ba73 | 5995 | DRM_MODE_ENCODER_TMDS, NULL)) |
893da0c9 | 5996 | goto err_encoder_init; |
f0fec3f2 | 5997 | |
5bfe2ac0 | 5998 | intel_encoder->compute_config = intel_dp_compute_config; |
00c09d70 | 5999 | intel_encoder->disable = intel_disable_dp; |
00c09d70 | 6000 | intel_encoder->get_hw_state = intel_dp_get_hw_state; |
045ac3b5 | 6001 | intel_encoder->get_config = intel_dp_get_config; |
07f9cd0b | 6002 | intel_encoder->suspend = intel_dp_encoder_suspend; |
e4a1d846 | 6003 | if (IS_CHERRYVIEW(dev)) { |
9197c88b | 6004 | intel_encoder->pre_pll_enable = chv_dp_pre_pll_enable; |
e4a1d846 CML |
6005 | intel_encoder->pre_enable = chv_pre_enable_dp; |
6006 | intel_encoder->enable = vlv_enable_dp; | |
580d3811 | 6007 | intel_encoder->post_disable = chv_post_disable_dp; |
d6db995f | 6008 | intel_encoder->post_pll_disable = chv_dp_post_pll_disable; |
e4a1d846 | 6009 | } else if (IS_VALLEYVIEW(dev)) { |
ecff4f3b | 6010 | intel_encoder->pre_pll_enable = vlv_dp_pre_pll_enable; |
ab1f90f9 JN |
6011 | intel_encoder->pre_enable = vlv_pre_enable_dp; |
6012 | intel_encoder->enable = vlv_enable_dp; | |
49277c31 | 6013 | intel_encoder->post_disable = vlv_post_disable_dp; |
ab1f90f9 | 6014 | } else { |
ecff4f3b JN |
6015 | intel_encoder->pre_enable = g4x_pre_enable_dp; |
6016 | intel_encoder->enable = g4x_enable_dp; | |
08aff3fe VS |
6017 | if (INTEL_INFO(dev)->gen >= 5) |
6018 | intel_encoder->post_disable = ilk_post_disable_dp; | |
ab1f90f9 | 6019 | } |
f0fec3f2 | 6020 | |
174edf1f | 6021 | intel_dig_port->port = port; |
f0fec3f2 | 6022 | intel_dig_port->dp.output_reg = output_reg; |
ccb1a831 | 6023 | intel_dig_port->max_lanes = 4; |
f0fec3f2 | 6024 | |
00c09d70 | 6025 | intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT; |
882ec384 VS |
6026 | if (IS_CHERRYVIEW(dev)) { |
6027 | if (port == PORT_D) | |
6028 | intel_encoder->crtc_mask = 1 << 2; | |
6029 | else | |
6030 | intel_encoder->crtc_mask = (1 << 0) | (1 << 1); | |
6031 | } else { | |
6032 | intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2); | |
6033 | } | |
bc079e8b | 6034 | intel_encoder->cloneable = 0; |
f0fec3f2 | 6035 | |
13cf5504 | 6036 | intel_dig_port->hpd_pulse = intel_dp_hpd_pulse; |
5fcece80 | 6037 | dev_priv->hotplug.irq_port[port] = intel_dig_port; |
13cf5504 | 6038 | |
11aee0f6 SM |
6039 | if (!intel_dp_init_connector(intel_dig_port, intel_connector)) |
6040 | goto err_init_connector; | |
6041 | ||
6042 | return; | |
6043 | ||
6044 | err_init_connector: | |
6045 | drm_encoder_cleanup(encoder); | |
893da0c9 | 6046 | err_encoder_init: |
11aee0f6 SM |
6047 | kfree(intel_connector); |
6048 | err_connector_alloc: | |
6049 | kfree(intel_dig_port); | |
6050 | ||
6051 | return; | |
f0fec3f2 | 6052 | } |
0e32b39c DA |
6053 | |
6054 | void intel_dp_mst_suspend(struct drm_device *dev) | |
6055 | { | |
6056 | struct drm_i915_private *dev_priv = dev->dev_private; | |
6057 | int i; | |
6058 | ||
6059 | /* disable MST */ | |
6060 | for (i = 0; i < I915_MAX_PORTS; i++) { | |
5fcece80 | 6061 | struct intel_digital_port *intel_dig_port = dev_priv->hotplug.irq_port[i]; |
0e32b39c DA |
6062 | if (!intel_dig_port) |
6063 | continue; | |
6064 | ||
6065 | if (intel_dig_port->base.type == INTEL_OUTPUT_DISPLAYPORT) { | |
6066 | if (!intel_dig_port->dp.can_mst) | |
6067 | continue; | |
6068 | if (intel_dig_port->dp.is_mst) | |
6069 | drm_dp_mst_topology_mgr_suspend(&intel_dig_port->dp.mst_mgr); | |
6070 | } | |
6071 | } | |
6072 | } | |
6073 | ||
6074 | void intel_dp_mst_resume(struct drm_device *dev) | |
6075 | { | |
6076 | struct drm_i915_private *dev_priv = dev->dev_private; | |
6077 | int i; | |
6078 | ||
6079 | for (i = 0; i < I915_MAX_PORTS; i++) { | |
5fcece80 | 6080 | struct intel_digital_port *intel_dig_port = dev_priv->hotplug.irq_port[i]; |
0e32b39c DA |
6081 | if (!intel_dig_port) |
6082 | continue; | |
6083 | if (intel_dig_port->base.type == INTEL_OUTPUT_DISPLAYPORT) { | |
6084 | int ret; | |
6085 | ||
6086 | if (!intel_dig_port->dp.can_mst) | |
6087 | continue; | |
6088 | ||
6089 | ret = drm_dp_mst_topology_mgr_resume(&intel_dig_port->dp.mst_mgr); | |
6090 | if (ret != 0) { | |
6091 | intel_dp_check_mst_status(&intel_dig_port->dp); | |
6092 | } | |
6093 | } | |
6094 | } | |
6095 | } |