]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | adm1021.c - Part of lm_sensors, Linux kernel modules for hardware | |
3 | monitoring | |
4 | Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and | |
5 | Philip Edelbrock <phil@netroedge.com> | |
6 | ||
7 | This program is free software; you can redistribute it and/or modify | |
8 | it under the terms of the GNU General Public License as published by | |
9 | the Free Software Foundation; either version 2 of the License, or | |
10 | (at your option) any later version. | |
11 | ||
12 | This program is distributed in the hope that it will be useful, | |
13 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | GNU General Public License for more details. | |
16 | ||
17 | You should have received a copy of the GNU General Public License | |
18 | along with this program; if not, write to the Free Software | |
19 | Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
20 | */ | |
21 | ||
1da177e4 LT |
22 | #include <linux/module.h> |
23 | #include <linux/init.h> | |
24 | #include <linux/slab.h> | |
25 | #include <linux/jiffies.h> | |
26 | #include <linux/i2c.h> | |
943b0830 MH |
27 | #include <linux/hwmon.h> |
28 | #include <linux/err.h> | |
9a61bf63 | 29 | #include <linux/mutex.h> |
1da177e4 LT |
30 | |
31 | ||
32 | /* Addresses to scan */ | |
33 | static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a, | |
34 | 0x29, 0x2a, 0x2b, | |
35 | 0x4c, 0x4d, 0x4e, | |
36 | I2C_CLIENT_END }; | |
1da177e4 LT |
37 | |
38 | /* Insmod parameters */ | |
f4b50261 | 39 | I2C_CLIENT_INSMOD_8(adm1021, adm1023, max1617, max1617a, thmc10, lm84, gl523sm, mc1066); |
1da177e4 LT |
40 | |
41 | /* adm1021 constants specified below */ | |
42 | ||
43 | /* The adm1021 registers */ | |
44 | /* Read-only */ | |
45 | #define ADM1021_REG_TEMP 0x00 | |
46 | #define ADM1021_REG_REMOTE_TEMP 0x01 | |
47 | #define ADM1021_REG_STATUS 0x02 | |
48 | #define ADM1021_REG_MAN_ID 0x0FE /* 0x41 = AMD, 0x49 = TI, 0x4D = Maxim, 0x23 = Genesys , 0x54 = Onsemi*/ | |
49 | #define ADM1021_REG_DEV_ID 0x0FF /* ADM1021 = 0x0X, ADM1023 = 0x3X */ | |
50 | #define ADM1021_REG_DIE_CODE 0x0FF /* MAX1617A */ | |
51 | /* These use different addresses for reading/writing */ | |
52 | #define ADM1021_REG_CONFIG_R 0x03 | |
53 | #define ADM1021_REG_CONFIG_W 0x09 | |
54 | #define ADM1021_REG_CONV_RATE_R 0x04 | |
55 | #define ADM1021_REG_CONV_RATE_W 0x0A | |
56 | /* These are for the ADM1023's additional precision on the remote temp sensor */ | |
57 | #define ADM1021_REG_REM_TEMP_PREC 0x010 | |
58 | #define ADM1021_REG_REM_OFFSET 0x011 | |
59 | #define ADM1021_REG_REM_OFFSET_PREC 0x012 | |
60 | #define ADM1021_REG_REM_TOS_PREC 0x013 | |
61 | #define ADM1021_REG_REM_THYST_PREC 0x014 | |
62 | /* limits */ | |
63 | #define ADM1021_REG_TOS_R 0x05 | |
64 | #define ADM1021_REG_TOS_W 0x0B | |
65 | #define ADM1021_REG_REMOTE_TOS_R 0x07 | |
66 | #define ADM1021_REG_REMOTE_TOS_W 0x0D | |
67 | #define ADM1021_REG_THYST_R 0x06 | |
68 | #define ADM1021_REG_THYST_W 0x0C | |
69 | #define ADM1021_REG_REMOTE_THYST_R 0x08 | |
70 | #define ADM1021_REG_REMOTE_THYST_W 0x0E | |
71 | /* write-only */ | |
72 | #define ADM1021_REG_ONESHOT 0x0F | |
73 | ||
74 | ||
75 | /* Conversions. Rounding and limit checking is only done on the TO_REG | |
76 | variants. Note that you should be a bit careful with which arguments | |
77 | these macros are called: arguments may be evaluated more than once. | |
78 | Fixing this is just not worth it. */ | |
79 | /* Conversions note: 1021 uses normal integer signed-byte format*/ | |
80 | #define TEMP_FROM_REG(val) (val > 127 ? (val-256)*1000 : val*1000) | |
81 | #define TEMP_TO_REG(val) (SENSORS_LIMIT((val < 0 ? (val/1000)+256 : val/1000),0,255)) | |
82 | ||
83 | /* Initial values */ | |
84 | ||
85 | /* Note: Even though I left the low and high limits named os and hyst, | |
86 | they don't quite work like a thermostat the way the LM75 does. I.e., | |
87 | a lower temp than THYST actually triggers an alarm instead of | |
88 | clearing it. Weird, ey? --Phil */ | |
89 | ||
90 | /* Each client has this additional data */ | |
91 | struct adm1021_data { | |
92 | struct i2c_client client; | |
943b0830 | 93 | struct class_device *class_dev; |
1da177e4 LT |
94 | enum chips type; |
95 | ||
9a61bf63 | 96 | struct mutex update_lock; |
1da177e4 LT |
97 | char valid; /* !=0 if following fields are valid */ |
98 | unsigned long last_updated; /* In jiffies */ | |
99 | ||
100 | u8 temp_max; /* Register values */ | |
101 | u8 temp_hyst; | |
102 | u8 temp_input; | |
103 | u8 remote_temp_max; | |
104 | u8 remote_temp_hyst; | |
105 | u8 remote_temp_input; | |
106 | u8 alarms; | |
1da177e4 LT |
107 | /* Special values for ADM1023 only */ |
108 | u8 remote_temp_prec; | |
109 | u8 remote_temp_os_prec; | |
110 | u8 remote_temp_hyst_prec; | |
111 | u8 remote_temp_offset; | |
112 | u8 remote_temp_offset_prec; | |
113 | }; | |
114 | ||
115 | static int adm1021_attach_adapter(struct i2c_adapter *adapter); | |
116 | static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind); | |
117 | static void adm1021_init_client(struct i2c_client *client); | |
118 | static int adm1021_detach_client(struct i2c_client *client); | |
119 | static int adm1021_read_value(struct i2c_client *client, u8 reg); | |
120 | static int adm1021_write_value(struct i2c_client *client, u8 reg, | |
121 | u16 value); | |
122 | static struct adm1021_data *adm1021_update_device(struct device *dev); | |
123 | ||
124 | /* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */ | |
02002963 | 125 | static int read_only; |
1da177e4 LT |
126 | |
127 | ||
128 | /* This is the driver that will be inserted */ | |
129 | static struct i2c_driver adm1021_driver = { | |
cdaf7934 | 130 | .driver = { |
cdaf7934 LR |
131 | .name = "adm1021", |
132 | }, | |
1da177e4 | 133 | .id = I2C_DRIVERID_ADM1021, |
1da177e4 LT |
134 | .attach_adapter = adm1021_attach_adapter, |
135 | .detach_client = adm1021_detach_client, | |
136 | }; | |
137 | ||
138 | #define show(value) \ | |
74880c06 | 139 | static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ |
1da177e4 LT |
140 | { \ |
141 | struct adm1021_data *data = adm1021_update_device(dev); \ | |
142 | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value)); \ | |
143 | } | |
144 | show(temp_max); | |
145 | show(temp_hyst); | |
146 | show(temp_input); | |
147 | show(remote_temp_max); | |
148 | show(remote_temp_hyst); | |
149 | show(remote_temp_input); | |
150 | ||
151 | #define show2(value) \ | |
74880c06 | 152 | static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ |
1da177e4 LT |
153 | { \ |
154 | struct adm1021_data *data = adm1021_update_device(dev); \ | |
155 | return sprintf(buf, "%d\n", data->value); \ | |
156 | } | |
157 | show2(alarms); | |
1da177e4 LT |
158 | |
159 | #define set(value, reg) \ | |
74880c06 | 160 | static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ |
1da177e4 LT |
161 | { \ |
162 | struct i2c_client *client = to_i2c_client(dev); \ | |
163 | struct adm1021_data *data = i2c_get_clientdata(client); \ | |
164 | int temp = simple_strtoul(buf, NULL, 10); \ | |
165 | \ | |
9a61bf63 | 166 | mutex_lock(&data->update_lock); \ |
1da177e4 LT |
167 | data->value = TEMP_TO_REG(temp); \ |
168 | adm1021_write_value(client, reg, data->value); \ | |
9a61bf63 | 169 | mutex_unlock(&data->update_lock); \ |
1da177e4 LT |
170 | return count; \ |
171 | } | |
172 | set(temp_max, ADM1021_REG_TOS_W); | |
173 | set(temp_hyst, ADM1021_REG_THYST_W); | |
174 | set(remote_temp_max, ADM1021_REG_REMOTE_TOS_W); | |
175 | set(remote_temp_hyst, ADM1021_REG_REMOTE_THYST_W); | |
176 | ||
177 | static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max); | |
178 | static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst); | |
179 | static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL); | |
180 | static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_remote_temp_max, set_remote_temp_max); | |
181 | static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_remote_temp_hyst, set_remote_temp_hyst); | |
182 | static DEVICE_ATTR(temp2_input, S_IRUGO, show_remote_temp_input, NULL); | |
183 | static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); | |
1da177e4 LT |
184 | |
185 | ||
186 | static int adm1021_attach_adapter(struct i2c_adapter *adapter) | |
187 | { | |
188 | if (!(adapter->class & I2C_CLASS_HWMON)) | |
189 | return 0; | |
2ed2dc3c | 190 | return i2c_probe(adapter, &addr_data, adm1021_detect); |
1da177e4 LT |
191 | } |
192 | ||
193 | static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind) | |
194 | { | |
195 | int i; | |
196 | struct i2c_client *new_client; | |
197 | struct adm1021_data *data; | |
198 | int err = 0; | |
199 | const char *type_name = ""; | |
200 | ||
1da177e4 LT |
201 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
202 | goto error0; | |
203 | ||
204 | /* OK. For now, we presume we have a valid client. We now create the | |
205 | client structure, even though we cannot fill it completely yet. | |
206 | But it allows us to access adm1021_{read,write}_value. */ | |
207 | ||
ba9c2e8d | 208 | if (!(data = kzalloc(sizeof(struct adm1021_data), GFP_KERNEL))) { |
1da177e4 LT |
209 | err = -ENOMEM; |
210 | goto error0; | |
211 | } | |
1da177e4 LT |
212 | |
213 | new_client = &data->client; | |
214 | i2c_set_clientdata(new_client, data); | |
215 | new_client->addr = address; | |
216 | new_client->adapter = adapter; | |
217 | new_client->driver = &adm1021_driver; | |
218 | new_client->flags = 0; | |
219 | ||
220 | /* Now, we do the remaining detection. */ | |
221 | if (kind < 0) { | |
222 | if ((adm1021_read_value(new_client, ADM1021_REG_STATUS) & 0x03) != 0x00 | |
223 | || (adm1021_read_value(new_client, ADM1021_REG_CONFIG_R) & 0x3F) != 0x00 | |
224 | || (adm1021_read_value(new_client, ADM1021_REG_CONV_RATE_R) & 0xF8) != 0x00) { | |
225 | err = -ENODEV; | |
226 | goto error1; | |
227 | } | |
228 | } | |
229 | ||
230 | /* Determine the chip type. */ | |
231 | if (kind <= 0) { | |
232 | i = adm1021_read_value(new_client, ADM1021_REG_MAN_ID); | |
233 | if (i == 0x41) | |
234 | if ((adm1021_read_value(new_client, ADM1021_REG_DEV_ID) & 0x0F0) == 0x030) | |
235 | kind = adm1023; | |
236 | else | |
237 | kind = adm1021; | |
238 | else if (i == 0x49) | |
239 | kind = thmc10; | |
240 | else if (i == 0x23) | |
241 | kind = gl523sm; | |
242 | else if ((i == 0x4d) && | |
243 | (adm1021_read_value(new_client, ADM1021_REG_DEV_ID) == 0x01)) | |
244 | kind = max1617a; | |
245 | else if (i == 0x54) | |
246 | kind = mc1066; | |
247 | /* LM84 Mfr ID in a different place, and it has more unused bits */ | |
248 | else if (adm1021_read_value(new_client, ADM1021_REG_CONV_RATE_R) == 0x00 | |
249 | && (kind == 0 /* skip extra detection */ | |
250 | || ((adm1021_read_value(new_client, ADM1021_REG_CONFIG_R) & 0x7F) == 0x00 | |
251 | && (adm1021_read_value(new_client, ADM1021_REG_STATUS) & 0xAB) == 0x00))) | |
252 | kind = lm84; | |
253 | else | |
254 | kind = max1617; | |
255 | } | |
256 | ||
257 | if (kind == max1617) { | |
258 | type_name = "max1617"; | |
259 | } else if (kind == max1617a) { | |
260 | type_name = "max1617a"; | |
261 | } else if (kind == adm1021) { | |
262 | type_name = "adm1021"; | |
263 | } else if (kind == adm1023) { | |
264 | type_name = "adm1023"; | |
265 | } else if (kind == thmc10) { | |
266 | type_name = "thmc10"; | |
267 | } else if (kind == lm84) { | |
268 | type_name = "lm84"; | |
269 | } else if (kind == gl523sm) { | |
270 | type_name = "gl523sm"; | |
271 | } else if (kind == mc1066) { | |
272 | type_name = "mc1066"; | |
273 | } | |
274 | ||
275 | /* Fill in the remaining client fields and put it into the global list */ | |
276 | strlcpy(new_client->name, type_name, I2C_NAME_SIZE); | |
277 | data->type = kind; | |
278 | data->valid = 0; | |
9a61bf63 | 279 | mutex_init(&data->update_lock); |
1da177e4 LT |
280 | |
281 | /* Tell the I2C layer a new client has arrived */ | |
282 | if ((err = i2c_attach_client(new_client))) | |
283 | goto error1; | |
284 | ||
285 | /* Initialize the ADM1021 chip */ | |
286 | if (kind != lm84) | |
287 | adm1021_init_client(new_client); | |
288 | ||
289 | /* Register sysfs hooks */ | |
943b0830 MH |
290 | data->class_dev = hwmon_device_register(&new_client->dev); |
291 | if (IS_ERR(data->class_dev)) { | |
292 | err = PTR_ERR(data->class_dev); | |
293 | goto error2; | |
294 | } | |
295 | ||
1da177e4 LT |
296 | device_create_file(&new_client->dev, &dev_attr_temp1_max); |
297 | device_create_file(&new_client->dev, &dev_attr_temp1_min); | |
298 | device_create_file(&new_client->dev, &dev_attr_temp1_input); | |
299 | device_create_file(&new_client->dev, &dev_attr_temp2_max); | |
300 | device_create_file(&new_client->dev, &dev_attr_temp2_min); | |
301 | device_create_file(&new_client->dev, &dev_attr_temp2_input); | |
302 | device_create_file(&new_client->dev, &dev_attr_alarms); | |
1da177e4 LT |
303 | |
304 | return 0; | |
305 | ||
943b0830 MH |
306 | error2: |
307 | i2c_detach_client(new_client); | |
1da177e4 LT |
308 | error1: |
309 | kfree(data); | |
310 | error0: | |
311 | return err; | |
312 | } | |
313 | ||
314 | static void adm1021_init_client(struct i2c_client *client) | |
315 | { | |
316 | /* Enable ADC and disable suspend mode */ | |
317 | adm1021_write_value(client, ADM1021_REG_CONFIG_W, | |
318 | adm1021_read_value(client, ADM1021_REG_CONFIG_R) & 0xBF); | |
319 | /* Set Conversion rate to 1/sec (this can be tinkered with) */ | |
320 | adm1021_write_value(client, ADM1021_REG_CONV_RATE_W, 0x04); | |
321 | } | |
322 | ||
323 | static int adm1021_detach_client(struct i2c_client *client) | |
324 | { | |
943b0830 | 325 | struct adm1021_data *data = i2c_get_clientdata(client); |
1da177e4 LT |
326 | int err; |
327 | ||
943b0830 MH |
328 | hwmon_device_unregister(data->class_dev); |
329 | ||
7bef5594 | 330 | if ((err = i2c_detach_client(client))) |
1da177e4 | 331 | return err; |
1da177e4 | 332 | |
943b0830 | 333 | kfree(data); |
1da177e4 LT |
334 | return 0; |
335 | } | |
336 | ||
337 | /* All registers are byte-sized */ | |
338 | static int adm1021_read_value(struct i2c_client *client, u8 reg) | |
339 | { | |
340 | return i2c_smbus_read_byte_data(client, reg); | |
341 | } | |
342 | ||
343 | static int adm1021_write_value(struct i2c_client *client, u8 reg, u16 value) | |
344 | { | |
345 | if (!read_only) | |
346 | return i2c_smbus_write_byte_data(client, reg, value); | |
347 | return 0; | |
348 | } | |
349 | ||
350 | static struct adm1021_data *adm1021_update_device(struct device *dev) | |
351 | { | |
352 | struct i2c_client *client = to_i2c_client(dev); | |
353 | struct adm1021_data *data = i2c_get_clientdata(client); | |
354 | ||
9a61bf63 | 355 | mutex_lock(&data->update_lock); |
1da177e4 LT |
356 | |
357 | if (time_after(jiffies, data->last_updated + HZ + HZ / 2) | |
358 | || !data->valid) { | |
359 | dev_dbg(&client->dev, "Starting adm1021 update\n"); | |
360 | ||
361 | data->temp_input = adm1021_read_value(client, ADM1021_REG_TEMP); | |
362 | data->temp_max = adm1021_read_value(client, ADM1021_REG_TOS_R); | |
363 | data->temp_hyst = adm1021_read_value(client, ADM1021_REG_THYST_R); | |
364 | data->remote_temp_input = adm1021_read_value(client, ADM1021_REG_REMOTE_TEMP); | |
365 | data->remote_temp_max = adm1021_read_value(client, ADM1021_REG_REMOTE_TOS_R); | |
366 | data->remote_temp_hyst = adm1021_read_value(client, ADM1021_REG_REMOTE_THYST_R); | |
367 | data->alarms = adm1021_read_value(client, ADM1021_REG_STATUS) & 0x7c; | |
1da177e4 LT |
368 | if (data->type == adm1023) { |
369 | data->remote_temp_prec = adm1021_read_value(client, ADM1021_REG_REM_TEMP_PREC); | |
370 | data->remote_temp_os_prec = adm1021_read_value(client, ADM1021_REG_REM_TOS_PREC); | |
371 | data->remote_temp_hyst_prec = adm1021_read_value(client, ADM1021_REG_REM_THYST_PREC); | |
372 | data->remote_temp_offset = adm1021_read_value(client, ADM1021_REG_REM_OFFSET); | |
373 | data->remote_temp_offset_prec = adm1021_read_value(client, ADM1021_REG_REM_OFFSET_PREC); | |
374 | } | |
375 | data->last_updated = jiffies; | |
376 | data->valid = 1; | |
377 | } | |
378 | ||
9a61bf63 | 379 | mutex_unlock(&data->update_lock); |
1da177e4 LT |
380 | |
381 | return data; | |
382 | } | |
383 | ||
384 | static int __init sensors_adm1021_init(void) | |
385 | { | |
386 | return i2c_add_driver(&adm1021_driver); | |
387 | } | |
388 | ||
389 | static void __exit sensors_adm1021_exit(void) | |
390 | { | |
391 | i2c_del_driver(&adm1021_driver); | |
392 | } | |
393 | ||
394 | MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl> and " | |
395 | "Philip Edelbrock <phil@netroedge.com>"); | |
396 | MODULE_DESCRIPTION("adm1021 driver"); | |
397 | MODULE_LICENSE("GPL"); | |
398 | ||
399 | module_param(read_only, bool, 0); | |
400 | MODULE_PARM_DESC(read_only, "Don't set any values, read only mode"); | |
401 | ||
402 | module_init(sensors_adm1021_init) | |
403 | module_exit(sensors_adm1021_exit) |