[mirror_ubuntu-artful-kernel.git] / drivers / hwmon / adm1021.c

/*
 * adm1021.c - Part of lm_sensors, Linux kernel modules for hardware
 *	       monitoring
 * Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl> and
 *			     Philip Edelbrock <phil@netroedge.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>


/* Addresses to scan */
static const unsigned short normal_i2c[] = {
	0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };

enum chips {
	adm1021, adm1023, max1617, max1617a, thmc10, lm84, gl523sm, mc1066 };

/* adm1021 constants specified below */

/* The adm1021 registers */
/* Read-only */
/* For nr in 0-1 */
#define ADM1021_REG_TEMP(nr)		(nr)
#define ADM1021_REG_STATUS		0x02
/* 0x41 = AD, 0x49 = TI, 0x4D = Maxim, 0x23 = Genesys , 0x54 = Onsemi */
#define ADM1021_REG_MAN_ID		0xFE
/* ADM1021 = 0x0X, ADM1023 = 0x3X */
#define ADM1021_REG_DEV_ID		0xFF
/* These use different addresses for reading/writing */
#define ADM1021_REG_CONFIG_R		0x03
#define ADM1021_REG_CONFIG_W		0x09
#define ADM1021_REG_CONV_RATE_R		0x04
#define ADM1021_REG_CONV_RATE_W		0x0A
/* These are for the ADM1023's additional precision on the remote temp sensor */
#define ADM1023_REG_REM_TEMP_PREC	0x10
#define ADM1023_REG_REM_OFFSET		0x11
#define ADM1023_REG_REM_OFFSET_PREC	0x12
#define ADM1023_REG_REM_TOS_PREC	0x13
#define ADM1023_REG_REM_THYST_PREC	0x14
/* limits */
/* For nr in 0-1 */
#define ADM1021_REG_TOS_R(nr)		(0x05 + 2 * (nr))
#define ADM1021_REG_TOS_W(nr)		(0x0B + 2 * (nr))
#define ADM1021_REG_THYST_R(nr)		(0x06 + 2 * (nr))
#define ADM1021_REG_THYST_W(nr)		(0x0C + 2 * (nr))
/* write-only */
#define ADM1021_REG_ONESHOT		0x0F

/* Initial values */

/*
 * Note: Even though I left the low and high limits named os and hyst,
 * they don't quite work like a thermostat the way the LM75 does.  I.e.,
 * a lower temp than THYST actually triggers an alarm instead of
 * clearing it.  Weird, ey?   --Phil
 */

/* Each client has this additional data */
struct adm1021_data {
	struct i2c_client *client;
	enum chips type;

	const struct attribute_group *groups[3];

	struct mutex update_lock;
	char valid;		/* !=0 if following fields are valid */
	char low_power;		/* !=0 if device in low power mode */
	unsigned long last_updated;	/* In jiffies */

	int temp_max[2];		/* Register values */
	int temp_min[2];
	int temp[2];
	u8 alarms;
	/* Special values for ADM1023 only */
	u8 remote_temp_offset;
	u8 remote_temp_offset_prec;
};

/* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */
static bool read_only;

static struct adm1021_data *adm1021_update_device(struct device *dev)
{
	struct adm1021_data *data = dev_get_drvdata(dev);
	struct i2c_client *client = data->client;

	mutex_lock(&data->update_lock);

	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
	    || !data->valid) {
		int i;

		dev_dbg(dev, "Starting adm1021 update\n");

		for (i = 0; i < 2; i++) {
			data->temp[i] = 1000 *
				(s8) i2c_smbus_read_byte_data(
					client, ADM1021_REG_TEMP(i));
			data->temp_max[i] = 1000 *
				(s8) i2c_smbus_read_byte_data(
					client, ADM1021_REG_TOS_R(i));
			if (data->type != lm84) {
				data->temp_min[i] = 1000 *
				  (s8) i2c_smbus_read_byte_data(client,
							ADM1021_REG_THYST_R(i));
			}
		}
		data->alarms = i2c_smbus_read_byte_data(client,
						ADM1021_REG_STATUS) & 0x7c;
		if (data->type == adm1023) {
			/*
			 * The ADM1023 provides 3 extra bits of precision for
			 * the remote sensor in extra registers.
			 */
			data->temp[1] += 125 * (i2c_smbus_read_byte_data(
				client, ADM1023_REG_REM_TEMP_PREC) >> 5);
			data->temp_max[1] += 125 * (i2c_smbus_read_byte_data(
				client, ADM1023_REG_REM_TOS_PREC) >> 5);
			data->temp_min[1] += 125 * (i2c_smbus_read_byte_data(
				client, ADM1023_REG_REM_THYST_PREC) >> 5);
			data->remote_temp_offset =
				i2c_smbus_read_byte_data(client,
						ADM1023_REG_REM_OFFSET);
			data->remote_temp_offset_prec =
				i2c_smbus_read_byte_data(client,
						ADM1023_REG_REM_OFFSET_PREC);
		}
		data->last_updated = jiffies;
		data->valid = 1;
	}

	mutex_unlock(&data->update_lock);

	return data;
}

static ssize_t show_temp(struct device *dev,
			 struct device_attribute *devattr, char *buf)
{
	int index = to_sensor_dev_attr(devattr)->index;
	struct adm1021_data *data = adm1021_update_device(dev);

	return sprintf(buf, "%d\n", data->temp[index]);
}

static ssize_t show_temp_max(struct device *dev,
			     struct device_attribute *devattr, char *buf)
{
	int index = to_sensor_dev_attr(devattr)->index;
	struct adm1021_data *data = adm1021_update_device(dev);

	return sprintf(buf, "%d\n", data->temp_max[index]);
}

static ssize_t show_temp_min(struct device *dev,
			     struct device_attribute *devattr, char *buf)
{
	int index = to_sensor_dev_attr(devattr)->index;
	struct adm1021_data *data = adm1021_update_device(dev);

	return sprintf(buf, "%d\n", data->temp_min[index]);
}

static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
			  char *buf)
{
	int index = to_sensor_dev_attr(attr)->index;
	struct adm1021_data *data = adm1021_update_device(dev);
	return sprintf(buf, "%u\n", (data->alarms >> index) & 1);
}

static ssize_t alarms_show(struct device *dev,
			   struct device_attribute *attr,
			   char *buf)
{
	struct adm1021_data *data = adm1021_update_device(dev);
	return sprintf(buf, "%u\n", data->alarms);
}

static ssize_t set_temp_max(struct device *dev,
			    struct device_attribute *devattr,
			    const char *buf, size_t count)
{
	int index = to_sensor_dev_attr(devattr)->index;
	struct adm1021_data *data = dev_get_drvdata(dev);
	struct i2c_client *client = data->client;
	long temp;
	int reg_val, err;

	err = kstrtol(buf, 10, &temp);
	if (err)
		return err;
	temp /= 1000;

	mutex_lock(&data->update_lock);
	reg_val = clamp_val(temp, -128, 127);
	data->temp_max[index] = reg_val * 1000;
	if (!read_only)
		i2c_smbus_write_byte_data(client, ADM1021_REG_TOS_W(index),
					  reg_val);
	mutex_unlock(&data->update_lock);

	return count;
}

static ssize_t set_temp_min(struct device *dev,
			    struct device_attribute *devattr,
			    const char *buf, size_t count)
{
	int index = to_sensor_dev_attr(devattr)->index;
	struct adm1021_data *data = dev_get_drvdata(dev);
	struct i2c_client *client = data->client;
	long temp;
	int reg_val, err;

	err = kstrtol(buf, 10, &temp);
	if (err)
		return err;
	temp /= 1000;

	mutex_lock(&data->update_lock);
	reg_val = clamp_val(temp, -128, 127);
	data->temp_min[index] = reg_val * 1000;
	if (!read_only)
		i2c_smbus_write_byte_data(client, ADM1021_REG_THYST_W(index),
					  reg_val);
	mutex_unlock(&data->update_lock);

	return count;
}

static ssize_t low_power_show(struct device *dev,
			      struct device_attribute *devattr, char *buf)
{
	struct adm1021_data *data = adm1021_update_device(dev);
	return sprintf(buf, "%d\n", data->low_power);
}

static ssize_t low_power_store(struct device *dev,
			       struct device_attribute *devattr,
			       const char *buf, size_t count)
{
	struct adm1021_data *data = dev_get_drvdata(dev);
	struct i2c_client *client = data->client;
	char low_power;
	unsigned long val;
	int err;

	err = kstrtoul(buf, 10, &val);
	if (err)
		return err;
	low_power = val != 0;

	mutex_lock(&data->update_lock);
	if (low_power != data->low_power) {
		int config = i2c_smbus_read_byte_data(
			client, ADM1021_REG_CONFIG_R);
		data->low_power = low_power;
		i2c_smbus_write_byte_data(client, ADM1021_REG_CONFIG_W,
			(config & 0xBF) | (low_power << 6));
	}
	mutex_unlock(&data->update_lock);

	return count;
}


static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max,
			  set_temp_max, 0);
static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_min,
			  set_temp_min, 0);
static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_max,
			  set_temp_max, 1);
static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_min,
			  set_temp_min, 1);
static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 6);
static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, 5);
static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 4);
static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_alarm, NULL, 3);
static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 2);

static DEVICE_ATTR_RO(alarms);
static DEVICE_ATTR_RW(low_power);

static struct attribute *adm1021_attributes[] = {
	&sensor_dev_attr_temp1_max.dev_attr.attr,
	&sensor_dev_attr_temp1_input.dev_attr.attr,
	&sensor_dev_attr_temp2_max.dev_attr.attr,
	&sensor_dev_attr_temp2_input.dev_attr.attr,
	&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
	&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
	&sensor_dev_attr_temp2_fault.dev_attr.attr,
	&dev_attr_alarms.attr,
	&dev_attr_low_power.attr,
	NULL
};

static const struct attribute_group adm1021_group = {
	.attrs = adm1021_attributes,
};

static struct attribute *adm1021_min_attributes[] = {
	&sensor_dev_attr_temp1_min.dev_attr.attr,
	&sensor_dev_attr_temp2_min.dev_attr.attr,
	&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
	&sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
	NULL
};

static const struct attribute_group adm1021_min_group = {
	.attrs = adm1021_min_attributes,
};

/* Return 0 if detection is successful, -ENODEV otherwise */
static int adm1021_detect(struct i2c_client *client,
			  struct i2c_board_info *info)
{
	struct i2c_adapter *adapter = client->adapter;
	const char *type_name;
	int conv_rate, status, config, man_id, dev_id;

	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
		pr_debug("detect failed, smbus byte data not supported!\n");
		return -ENODEV;
	}

	status = i2c_smbus_read_byte_data(client, ADM1021_REG_STATUS);
	conv_rate = i2c_smbus_read_byte_data(client,
					     ADM1021_REG_CONV_RATE_R);
	config = i2c_smbus_read_byte_data(client, ADM1021_REG_CONFIG_R);

	/* Check unused bits */
	if ((status & 0x03) || (config & 0x3F) || (conv_rate & 0xF8)) {
		pr_debug("detect failed, chip not detected!\n");
		return -ENODEV;
	}

	/* Determine the chip type. */
	man_id = i2c_smbus_read_byte_data(client, ADM1021_REG_MAN_ID);
	dev_id = i2c_smbus_read_byte_data(client, ADM1021_REG_DEV_ID);

	if (man_id < 0 || dev_id < 0)
		return -ENODEV;

	if (man_id == 0x4d && dev_id == 0x01)
		type_name = "max1617a";
	else if (man_id == 0x41) {
		if ((dev_id & 0xF0) == 0x30)
			type_name = "adm1023";
		else if ((dev_id & 0xF0) == 0x00)
			type_name = "adm1021";
		else
			return -ENODEV;
	} else if (man_id == 0x49)
		type_name = "thmc10";
	else if (man_id == 0x23)
		type_name = "gl523sm";
	else if (man_id == 0x54)
		type_name = "mc1066";
	else {
		int lte, rte, lhi, rhi, llo, rlo;

		/* extra checks for LM84 and MAX1617 to avoid misdetections */

		llo = i2c_smbus_read_byte_data(client, ADM1021_REG_THYST_R(0));
		rlo = i2c_smbus_read_byte_data(client, ADM1021_REG_THYST_R(1));

		/* fail if any of the additional register reads failed */
		if (llo < 0 || rlo < 0)
			return -ENODEV;

		lte = i2c_smbus_read_byte_data(client, ADM1021_REG_TEMP(0));
		rte = i2c_smbus_read_byte_data(client, ADM1021_REG_TEMP(1));
		lhi = i2c_smbus_read_byte_data(client, ADM1021_REG_TOS_R(0));
		rhi = i2c_smbus_read_byte_data(client, ADM1021_REG_TOS_R(1));

		/*
		 * Fail for negative temperatures and negative high limits.
		 * This check also catches read errors on the tested registers.
		 */
		if ((s8)lte < 0 || (s8)rte < 0 || (s8)lhi < 0 || (s8)rhi < 0)
			return -ENODEV;

		/* fail if all registers hold the same value */
		if (lte == rte && lte == lhi && lte == rhi && lte == llo
		    && lte == rlo)
			return -ENODEV;

		/*
		 * LM84 Mfr ID is in a different place,
		 * and it has more unused bits.
		 */
		if (conv_rate == 0x00
		    && (config & 0x7F) == 0x00
		    && (status & 0xAB) == 0x00) {
			type_name = "lm84";
		} else {
			/* fail if low limits are larger than high limits */
			if ((s8)llo > lhi || (s8)rlo > rhi)
				return -ENODEV;
			type_name = "max1617";
		}
	}

	pr_debug("Detected chip %s at adapter %d, address 0x%02x.\n",
		 type_name, i2c_adapter_id(adapter), client->addr);
	strlcpy(info->type, type_name, I2C_NAME_SIZE);

	return 0;
}

static void adm1021_init_client(struct i2c_client *client)
{
	/* Enable ADC and disable suspend mode */
	i2c_smbus_write_byte_data(client, ADM1021_REG_CONFIG_W,
		i2c_smbus_read_byte_data(client, ADM1021_REG_CONFIG_R) & 0xBF);
	/* Set Conversion rate to 1/sec (this can be tinkered with) */
	i2c_smbus_write_byte_data(client, ADM1021_REG_CONV_RATE_W, 0x04);
}

static int adm1021_probe(struct i2c_client *client,
			 const struct i2c_device_id *id)
{
	struct device *dev = &client->dev;
	struct adm1021_data *data;
	struct device *hwmon_dev;

	data = devm_kzalloc(dev, sizeof(struct adm1021_data), GFP_KERNEL);
	if (!data)
		return -ENOMEM;

	data->client = client;
	data->type = id->driver_data;
	mutex_init(&data->update_lock);

	/* Initialize the ADM1021 chip */
	if (data->type != lm84 && !read_only)
		adm1021_init_client(client);

	data->groups[0] = &adm1021_group;
	if (data->type != lm84)
		data->groups[1] = &adm1021_min_group;

	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
							   data, data->groups);

	return PTR_ERR_OR_ZERO(hwmon_dev);
}

static const struct i2c_device_id adm1021_id[] = {
	{ "adm1021", adm1021 },
	{ "adm1023", adm1023 },
	{ "max1617", max1617 },
	{ "max1617a", max1617a },
	{ "thmc10", thmc10 },
	{ "lm84", lm84 },
	{ "gl523sm", gl523sm },
	{ "mc1066", mc1066 },
	{ }
};
MODULE_DEVICE_TABLE(i2c, adm1021_id);

static struct i2c_driver adm1021_driver = {
	.class		= I2C_CLASS_HWMON,
	.driver = {
		.name	= "adm1021",
	},
	.probe		= adm1021_probe,
	.id_table	= adm1021_id,
	.detect		= adm1021_detect,
	.address_list	= normal_i2c,
};

module_i2c_driver(adm1021_driver);

MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "
		"Philip Edelbrock <phil@netroedge.com>");
MODULE_DESCRIPTION("adm1021 driver");
MODULE_LICENSE("GPL");

module_param(read_only, bool, 0);
MODULE_PARM_DESC(read_only, "Don't set any values, read only mode");
Commit	Line	Data
1da177e4	1	/*
21d2a8f1 GR	2	* adm1021.c - Part of lm_sensors, Linux kernel modules for hardware
	3	* monitoring
	4	* Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and
	5	* Philip Edelbrock <phil@netroedge.com>
	6	*
	7	* This program is free software; you can redistribute it and/or modify
	8	* it under the terms of the GNU General Public License as published by
	9	* the Free Software Foundation; either version 2 of the License, or
	10	* (at your option) any later version.
	11	*
	12	* This program is distributed in the hope that it will be useful,
	13	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	14	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	15	* GNU General Public License for more details.
	16	*
	17	* You should have received a copy of the GNU General Public License
	18	* along with this program; if not, write to the Free Software
	19	* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	20	*/
1da177e4	21
1da177e4 LT	22	#include <linux/module.h>
	23	#include <linux/init.h>
	24	#include <linux/slab.h>
	25	#include <linux/jiffies.h>
	26	#include <linux/i2c.h>
943b0830	27	#include <linux/hwmon.h>
a8d6646e	28	#include <linux/hwmon-sysfs.h>
943b0830	29	#include <linux/err.h>
9a61bf63	30	#include <linux/mutex.h>
1da177e4 LT	31
	32
	33	/* Addresses to scan */
25e9c86d MH	34	static const unsigned short normal_i2c[] = {
25e9c86d MH	35	0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
1da177e4	36
e5e9f44c JD	37	enum chips {
e5e9f44c JD	38	adm1021, adm1023, max1617, max1617a, thmc10, lm84, gl523sm, mc1066 };
1da177e4 LT	39
	40	/* adm1021 constants specified below */
	41
	42	/* The adm1021 registers */
	43	/* Read-only */
a8d6646e KH	44	/* For nr in 0-1 */
a8d6646e KH	45	#define ADM1021_REG_TEMP(nr) (nr)
1da177e4	46	#define ADM1021_REG_STATUS 0x02
c83c41e4 KH	47	/* 0x41 = AD, 0x49 = TI, 0x4D = Maxim, 0x23 = Genesys , 0x54 = Onsemi */
	48	#define ADM1021_REG_MAN_ID 0xFE
	49	/* ADM1021 = 0x0X, ADM1023 = 0x3X */
	50	#define ADM1021_REG_DEV_ID 0xFF
1da177e4 LT	51	/* These use different addresses for reading/writing */
	52	#define ADM1021_REG_CONFIG_R 0x03
	53	#define ADM1021_REG_CONFIG_W 0x09
	54	#define ADM1021_REG_CONV_RATE_R 0x04
	55	#define ADM1021_REG_CONV_RATE_W 0x0A
	56	/* These are for the ADM1023's additional precision on the remote temp sensor */
c83c41e4 KH	57	#define ADM1023_REG_REM_TEMP_PREC 0x10
	58	#define ADM1023_REG_REM_OFFSET 0x11
	59	#define ADM1023_REG_REM_OFFSET_PREC 0x12
	60	#define ADM1023_REG_REM_TOS_PREC 0x13
	61	#define ADM1023_REG_REM_THYST_PREC 0x14
1da177e4	62	/* limits */
a8d6646e KH	63	/* For nr in 0-1 */
	64	#define ADM1021_REG_TOS_R(nr) (0x05 + 2 * (nr))
	65	#define ADM1021_REG_TOS_W(nr) (0x0B + 2 * (nr))
	66	#define ADM1021_REG_THYST_R(nr) (0x06 + 2 * (nr))
	67	#define ADM1021_REG_THYST_W(nr) (0x0C + 2 * (nr))
1da177e4 LT	68	/* write-only */
	69	#define ADM1021_REG_ONESHOT 0x0F
	70
1da177e4 LT	71	/* Initial values */
1da177e4 LT	72
21d2a8f1 GR	73	/*
	74	* Note: Even though I left the low and high limits named os and hyst,
	75	* they don't quite work like a thermostat the way the LM75 does. I.e.,
	76	* a lower temp than THYST actually triggers an alarm instead of
	77	* clearing it. Weird, ey? --Phil
	78	*/
1da177e4 LT	79
	80	/* Each client has this additional data */
	81	struct adm1021_data {
c669ec80	82	struct i2c_client *client;
1da177e4 LT	83	enum chips type;
1da177e4 LT	84
c669ec80 GR	85	const struct attribute_group *groups[3];
c669ec80 GR	86
9a61bf63	87	struct mutex update_lock;
1da177e4	88	char valid; /* !=0 if following fields are valid */
905ffdc3	89	char low_power; /* !=0 if device in low power mode */
1da177e4 LT	90	unsigned long last_updated; /* In jiffies */
1da177e4 LT	91
f2668895 MA	92	int temp_max[2]; /* Register values */
	93	int temp_min[2];
	94	int temp[2];
a8d6646e KH	95	u8 alarms;
a8d6646e KH	96	/* Special values for ADM1023 only */
a8d6646e KH	97	u8 remote_temp_offset;
a8d6646e KH	98	u8 remote_temp_offset_prec;
1da177e4 LT	99	};
1da177e4 LT	100
1da177e4	101	/* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */
90ab5ee9	102	static bool read_only;
1da177e4	103
48995bc4 AL	104	static struct adm1021_data adm1021_update_device(struct device dev)
	105	{
	106	struct adm1021_data *data = dev_get_drvdata(dev);
	107	struct i2c_client *client = data->client;
1da177e4	108
48995bc4	109	mutex_lock(&data->update_lock);
65817ed8	110
48995bc4 AL	111	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
	112	\|\| !data->valid) {
	113	int i;
	114
	115	dev_dbg(dev, "Starting adm1021 update\n");
	116
	117	for (i = 0; i < 2; i++) {
	118	data->temp[i] = 1000 *
	119	(s8) i2c_smbus_read_byte_data(
	120	client, ADM1021_REG_TEMP(i));
	121	data->temp_max[i] = 1000 *
	122	(s8) i2c_smbus_read_byte_data(
	123	client, ADM1021_REG_TOS_R(i));
	124	if (data->type != lm84) {
	125	data->temp_min[i] = 1000 *
	126	(s8) i2c_smbus_read_byte_data(client,
	127	ADM1021_REG_THYST_R(i));
	128	}
	129	}
	130	data->alarms = i2c_smbus_read_byte_data(client,
	131	ADM1021_REG_STATUS) & 0x7c;
	132	if (data->type == adm1023) {
	133	/*
	134	* The ADM1023 provides 3 extra bits of precision for
	135	* the remote sensor in extra registers.
	136	*/
	137	data->temp[1] += 125 * (i2c_smbus_read_byte_data(
	138	client, ADM1023_REG_REM_TEMP_PREC) >> 5);
	139	data->temp_max[1] += 125 * (i2c_smbus_read_byte_data(
	140	client, ADM1023_REG_REM_TOS_PREC) >> 5);
	141	data->temp_min[1] += 125 * (i2c_smbus_read_byte_data(
	142	client, ADM1023_REG_REM_THYST_PREC) >> 5);
	143	data->remote_temp_offset =
	144	i2c_smbus_read_byte_data(client,
	145	ADM1023_REG_REM_OFFSET);
	146	data->remote_temp_offset_prec =
	147	i2c_smbus_read_byte_data(client,
	148	ADM1023_REG_REM_OFFSET_PREC);
	149	}
	150	data->last_updated = jiffies;
	151	data->valid = 1;
	152	}
	153
	154	mutex_unlock(&data->update_lock);
	155
	156	return data;
	157	}
1da177e4	158
a8d6646e KH	159	static ssize_t show_temp(struct device *dev,
	160	struct device_attribute devattr, char buf)
	161	{
	162	int index = to_sensor_dev_attr(devattr)->index;
	163	struct adm1021_data *data = adm1021_update_device(dev);
	164
f2668895	165	return sprintf(buf, "%d\n", data->temp[index]);
a8d6646e KH	166	}
	167
	168	static ssize_t show_temp_max(struct device *dev,
	169	struct device_attribute devattr, char buf)
	170	{
	171	int index = to_sensor_dev_attr(devattr)->index;
	172	struct adm1021_data *data = adm1021_update_device(dev);
	173
f2668895	174	return sprintf(buf, "%d\n", data->temp_max[index]);
a8d6646e KH	175	}
	176
	177	static ssize_t show_temp_min(struct device *dev,
	178	struct device_attribute devattr, char buf)
	179	{
	180	int index = to_sensor_dev_attr(devattr)->index;
	181	struct adm1021_data *data = adm1021_update_device(dev);
	182
f2668895	183	return sprintf(buf, "%d\n", data->temp_min[index]);
1da177e4	184	}
1da177e4	185
739ba248 KH	186	static ssize_t show_alarm(struct device dev, struct device_attribute attr,
	187	char *buf)
	188	{
	189	int index = to_sensor_dev_attr(attr)->index;
	190	struct adm1021_data *data = adm1021_update_device(dev);
	191	return sprintf(buf, "%u\n", (data->alarms >> index) & 1);
	192	}
	193
6b41013d	194	static ssize_t alarms_show(struct device *dev,
c83c41e4 KH	195	struct device_attribute *attr,
	196	char *buf)
	197	{
	198	struct adm1021_data *data = adm1021_update_device(dev);
	199	return sprintf(buf, "%u\n", data->alarms);
1da177e4	200	}
c83c41e4	201
a8d6646e KH	202	static ssize_t set_temp_max(struct device *dev,
	203	struct device_attribute *devattr,
	204	const char *buf, size_t count)
	205	{
	206	int index = to_sensor_dev_attr(devattr)->index;
c669ec80 GR	207	struct adm1021_data *data = dev_get_drvdata(dev);
c669ec80 GR	208	struct i2c_client *client = data->client;
21d2a8f1	209	long temp;
c024044d	210	int reg_val, err;
21d2a8f1 GR	211
	212	err = kstrtol(buf, 10, &temp);
	213	if (err)
	214	return err;
	215	temp /= 1000;
a8d6646e KH	216
a8d6646e KH	217	mutex_lock(&data->update_lock);
c024044d AL	218	reg_val = clamp_val(temp, -128, 127);
c024044d AL	219	data->temp_max[index] = reg_val * 1000;
a8d6646e KH	220	if (!read_only)
a8d6646e KH	221	i2c_smbus_write_byte_data(client, ADM1021_REG_TOS_W(index),
c024044d	222	reg_val);
a8d6646e KH	223	mutex_unlock(&data->update_lock);
	224
	225	return count;
	226	}
	227
	228	static ssize_t set_temp_min(struct device *dev,
	229	struct device_attribute *devattr,
	230	const char *buf, size_t count)
	231	{
	232	int index = to_sensor_dev_attr(devattr)->index;
c669ec80 GR	233	struct adm1021_data *data = dev_get_drvdata(dev);
c669ec80 GR	234	struct i2c_client *client = data->client;
21d2a8f1	235	long temp;
c024044d	236	int reg_val, err;
21d2a8f1 GR	237
	238	err = kstrtol(buf, 10, &temp);
	239	if (err)
	240	return err;
	241	temp /= 1000;
a8d6646e KH	242
a8d6646e KH	243	mutex_lock(&data->update_lock);
c024044d AL	244	reg_val = clamp_val(temp, -128, 127);
c024044d AL	245	data->temp_min[index] = reg_val * 1000;
a8d6646e KH	246	if (!read_only)
a8d6646e KH	247	i2c_smbus_write_byte_data(client, ADM1021_REG_THYST_W(index),
c024044d	248	reg_val);
a8d6646e KH	249	mutex_unlock(&data->update_lock);
	250
	251	return count;
1da177e4	252	}
1da177e4	253
6b41013d	254	static ssize_t low_power_show(struct device *dev,
905ffdc3 MA	255	struct device_attribute devattr, char buf)
	256	{
	257	struct adm1021_data *data = adm1021_update_device(dev);
	258	return sprintf(buf, "%d\n", data->low_power);
	259	}
	260
6b41013d JL	261	static ssize_t low_power_store(struct device *dev,
	262	struct device_attribute *devattr,
	263	const char *buf, size_t count)
905ffdc3	264	{
c669ec80 GR	265	struct adm1021_data *data = dev_get_drvdata(dev);
c669ec80 GR	266	struct i2c_client *client = data->client;
21d2a8f1 GR	267	char low_power;
	268	unsigned long val;
	269	int err;
	270
	271	err = kstrtoul(buf, 10, &val);
	272	if (err)
	273	return err;
	274	low_power = val != 0;
905ffdc3 MA	275
	276	mutex_lock(&data->update_lock);
	277	if (low_power != data->low_power) {
	278	int config = i2c_smbus_read_byte_data(
	279	client, ADM1021_REG_CONFIG_R);
	280	data->low_power = low_power;
	281	i2c_smbus_write_byte_data(client, ADM1021_REG_CONFIG_W,
	282	(config & 0xBF) \| (low_power << 6));
	283	}
	284	mutex_unlock(&data->update_lock);
	285
	286	return count;
	287	}
	288
	289
a8d6646e KH	290	static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
	291	static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR \| S_IRUGO, show_temp_max,
	292	set_temp_max, 0);
	293	static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR \| S_IRUGO, show_temp_min,
	294	set_temp_min, 0);
	295	static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
	296	static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR \| S_IRUGO, show_temp_max,
	297	set_temp_max, 1);
	298	static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR \| S_IRUGO, show_temp_min,
	299	set_temp_min, 1);
739ba248 KH	300	static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 6);
	301	static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, 5);
	302	static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 4);
	303	static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_alarm, NULL, 3);
	304	static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 2);
	305
6b41013d JL	306	static DEVICE_ATTR_RO(alarms);
6b41013d JL	307	static DEVICE_ATTR_RW(low_power);
1da177e4	308
681c6f7a	309	static struct attribute *adm1021_attributes[] = {
a8d6646e	310	&sensor_dev_attr_temp1_max.dev_attr.attr,
a8d6646e KH	311	&sensor_dev_attr_temp1_input.dev_attr.attr,
a8d6646e KH	312	&sensor_dev_attr_temp2_max.dev_attr.attr,
a8d6646e	313	&sensor_dev_attr_temp2_input.dev_attr.attr,
739ba248	314	&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
739ba248	315	&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
739ba248	316	&sensor_dev_attr_temp2_fault.dev_attr.attr,
681c6f7a	317	&dev_attr_alarms.attr,
905ffdc3	318	&dev_attr_low_power.attr,
681c6f7a MH	319	NULL
	320	};
	321
	322	static const struct attribute_group adm1021_group = {
	323	.attrs = adm1021_attributes,
	324	};
	325
68146a57 GR	326	static struct attribute *adm1021_min_attributes[] = {
	327	&sensor_dev_attr_temp1_min.dev_attr.attr,
	328	&sensor_dev_attr_temp2_min.dev_attr.attr,
	329	&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
	330	&sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
	331	NULL
	332	};
	333
	334	static const struct attribute_group adm1021_min_group = {
	335	.attrs = adm1021_min_attributes,
	336	};
	337
65817ed8	338	/* Return 0 if detection is successful, -ENODEV otherwise */
310ec792	339	static int adm1021_detect(struct i2c_client *client,
65817ed8	340	struct i2c_board_info *info)
1da177e4	341	{
65817ed8	342	struct i2c_adapter *adapter = client->adapter;
8007ea35 JD	343	const char *type_name;
8007ea35 JD	344	int conv_rate, status, config, man_id, dev_id;
1da177e4	345
c83c41e4	346	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
b55f3757	347	pr_debug("detect failed, smbus byte data not supported!\n");
65817ed8	348	return -ENODEV;
1da177e4	349	}
1da177e4	350
c83c41e4 KH	351	status = i2c_smbus_read_byte_data(client, ADM1021_REG_STATUS);
	352	conv_rate = i2c_smbus_read_byte_data(client,
	353	ADM1021_REG_CONV_RATE_R);
	354	config = i2c_smbus_read_byte_data(client, ADM1021_REG_CONFIG_R);
1da177e4	355
8007ea35 JD	356	/* Check unused bits */
8007ea35 JD	357	if ((status & 0x03) \|\| (config & 0x3F) \|\| (conv_rate & 0xF8)) {
b55f3757	358	pr_debug("detect failed, chip not detected!\n");
8007ea35	359	return -ENODEV;
1da177e4 LT	360	}
	361
	362	/* Determine the chip type. */
8007ea35 JD	363	man_id = i2c_smbus_read_byte_data(client, ADM1021_REG_MAN_ID);
8007ea35 JD	364	dev_id = i2c_smbus_read_byte_data(client, ADM1021_REG_DEV_ID);
1da177e4	365
591bfcfc GR	366	if (man_id < 0 \|\| dev_id < 0)
	367	return -ENODEV;
	368
8007ea35	369	if (man_id == 0x4d && dev_id == 0x01)
1da177e4	370	type_name = "max1617a";
8007ea35 JD	371	else if (man_id == 0x41) {
	372	if ((dev_id & 0xF0) == 0x30)
	373	type_name = "adm1023";
591bfcfc	374	else if ((dev_id & 0xF0) == 0x00)
8007ea35	375	type_name = "adm1021";
591bfcfc GR	376	else
591bfcfc GR	377	return -ENODEV;
8007ea35	378	} else if (man_id == 0x49)
1da177e4	379	type_name = "thmc10";
8007ea35	380	else if (man_id == 0x23)
1da177e4	381	type_name = "gl523sm";
8007ea35	382	else if (man_id == 0x54)
1da177e4	383	type_name = "mc1066";
591bfcfc GR	384	else {
	385	int lte, rte, lhi, rhi, llo, rlo;
	386
	387	/* extra checks for LM84 and MAX1617 to avoid misdetections */
	388
	389	llo = i2c_smbus_read_byte_data(client, ADM1021_REG_THYST_R(0));
	390	rlo = i2c_smbus_read_byte_data(client, ADM1021_REG_THYST_R(1));
	391
	392	/* fail if any of the additional register reads failed */
	393	if (llo < 0 \|\| rlo < 0)
	394	return -ENODEV;
	395
	396	lte = i2c_smbus_read_byte_data(client, ADM1021_REG_TEMP(0));
	397	rte = i2c_smbus_read_byte_data(client, ADM1021_REG_TEMP(1));
	398	lhi = i2c_smbus_read_byte_data(client, ADM1021_REG_TOS_R(0));
	399	rhi = i2c_smbus_read_byte_data(client, ADM1021_REG_TOS_R(1));
	400
	401	/*
	402	* Fail for negative temperatures and negative high limits.
	403	* This check also catches read errors on the tested registers.
	404	*/
	405	if ((s8)lte < 0 \|\| (s8)rte < 0 \|\| (s8)lhi < 0 \|\| (s8)rhi < 0)
	406	return -ENODEV;
	407
	408	/* fail if all registers hold the same value */
	409	if (lte == rte && lte == lhi && lte == rhi && lte == llo
	410	&& lte == rlo)
	411	return -ENODEV;
	412
	413	/*
	414	* LM84 Mfr ID is in a different place,
	415	* and it has more unused bits.
	416	*/
	417	if (conv_rate == 0x00
	418	&& (config & 0x7F) == 0x00
	419	&& (status & 0xAB) == 0x00) {
	420	type_name = "lm84";
	421	} else {
	422	/* fail if low limits are larger than high limits */
	423	if ((s8)llo > lhi \|\| (s8)rlo > rhi)
	424	return -ENODEV;
	425	type_name = "max1617";
	426	}
	427	}
8007ea35	428
b55f3757	429	pr_debug("Detected chip %s at adapter %d, address 0x%02x.\n",
65817ed8 JD	430	type_name, i2c_adapter_id(adapter), client->addr);
65817ed8 JD	431	strlcpy(info->type, type_name, I2C_NAME_SIZE);
1da177e4	432
65817ed8 JD	433	return 0;
65817ed8 JD	434	}
1da177e4	435
48995bc4 AL	436	static void adm1021_init_client(struct i2c_client *client)
	437	{
	438	/* Enable ADC and disable suspend mode */
	439	i2c_smbus_write_byte_data(client, ADM1021_REG_CONFIG_W,
	440	i2c_smbus_read_byte_data(client, ADM1021_REG_CONFIG_R) & 0xBF);
	441	/* Set Conversion rate to 1/sec (this can be tinkered with) */
	442	i2c_smbus_write_byte_data(client, ADM1021_REG_CONV_RATE_W, 0x04);
	443	}
	444
65817ed8 JD	445	static int adm1021_probe(struct i2c_client *client,
	446	const struct i2c_device_id *id)
	447	{
c669ec80	448	struct device *dev = &client->dev;
65817ed8	449	struct adm1021_data *data;
c669ec80	450	struct device *hwmon_dev;
65817ed8	451
c669ec80	452	data = devm_kzalloc(dev, sizeof(struct adm1021_data), GFP_KERNEL);
b55f3757	453	if (!data)
06ce97d6	454	return -ENOMEM;
65817ed8	455
c669ec80	456	data->client = client;
65817ed8 JD	457	data->type = id->driver_data;
65817ed8 JD	458	mutex_init(&data->update_lock);
1da177e4 LT	459
1da177e4 LT	460	/* Initialize the ADM1021 chip */
65817ed8	461	if (data->type != lm84 && !read_only)
c83c41e4	462	adm1021_init_client(client);
1da177e4	463
c669ec80 GR	464	data->groups[0] = &adm1021_group;
	465	if (data->type != lm84)
	466	data->groups[1] = &adm1021_min_group;
68146a57	467
c669ec80 GR	468	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
c669ec80 GR	469	data, data->groups);
943b0830	470
c669ec80	471	return PTR_ERR_OR_ZERO(hwmon_dev);
1da177e4 LT	472	}
1da177e4 LT	473
48995bc4 AL	474	static const struct i2c_device_id adm1021_id[] = {
	475	{ "adm1021", adm1021 },
	476	{ "adm1023", adm1023 },
	477	{ "max1617", max1617 },
	478	{ "max1617a", max1617a },
	479	{ "thmc10", thmc10 },
	480	{ "lm84", lm84 },
	481	{ "gl523sm", gl523sm },
	482	{ "mc1066", mc1066 },
	483	{ }
	484	};
	485	MODULE_DEVICE_TABLE(i2c, adm1021_id);
1da177e4	486
48995bc4 AL	487	static struct i2c_driver adm1021_driver = {
	488	.class = I2C_CLASS_HWMON,
	489	.driver = {
	490	.name = "adm1021",
	491	},
	492	.probe = adm1021_probe,
	493	.id_table = adm1021_id,
	494	.detect = adm1021_detect,
	495	.address_list = normal_i2c,
	496	};
1da177e4	497
f0967eea	498	module_i2c_driver(adm1021_driver);
1da177e4	499
21d2a8f1	500	MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "
1da177e4 LT	501	"Philip Edelbrock <phil@netroedge.com>");
	502	MODULE_DESCRIPTION("adm1021 driver");
	503	MODULE_LICENSE("GPL");
	504
	505	module_param(read_only, bool, 0);
	506	MODULE_PARM_DESC(read_only, "Don't set any values, read only mode");