]>
Commit | Line | Data |
---|---|---|
312ea07b SO |
1 | /* |
2 | * drivers/hwmon/lis3lv02d_i2c.c | |
3 | * | |
4 | * Implements I2C interface for lis3lv02d (STMicroelectronics) accelerometer. | |
5 | * Driver is based on corresponding SPI driver written by Daniel Mack | |
6 | * (lis3lv02d_spi.c (C) 2009 Daniel Mack <daniel@caiaq.de> ). | |
7 | * | |
8 | * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). | |
9 | * | |
10 | * Contact: Samu Onkalo <samu.p.onkalo@nokia.com> | |
11 | * | |
12 | * This program is free software; you can redistribute it and/or | |
13 | * modify it under the terms of the GNU General Public License | |
14 | * version 2 as published by the Free Software Foundation. | |
15 | * | |
16 | * This program is distributed in the hope that it will be useful, but | |
17 | * WITHOUT ANY WARRANTY; without even the implied warranty of | |
18 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
19 | * General Public License for more details. | |
20 | * | |
21 | * You should have received a copy of the GNU General Public License | |
22 | * along with this program; if not, write to the Free Software | |
23 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | |
24 | * 02110-1301 USA | |
25 | */ | |
26 | ||
27 | #include <linux/module.h> | |
28 | #include <linux/kernel.h> | |
29 | #include <linux/init.h> | |
30 | #include <linux/err.h> | |
31 | #include <linux/i2c.h> | |
2a346996 | 32 | #include <linux/pm_runtime.h> |
f9deb41f | 33 | #include <linux/delay.h> |
312ea07b SO |
34 | #include "lis3lv02d.h" |
35 | ||
36 | #define DRV_NAME "lis3lv02d_i2c" | |
37 | ||
f9deb41f SO |
38 | static const char reg_vdd[] = "Vdd"; |
39 | static const char reg_vdd_io[] = "Vdd_IO"; | |
40 | ||
41 | static int lis3_reg_ctrl(struct lis3lv02d *lis3, bool state) | |
42 | { | |
43 | int ret; | |
44 | if (state == LIS3_REG_OFF) { | |
45 | ret = regulator_bulk_disable(ARRAY_SIZE(lis3->regulators), | |
46 | lis3->regulators); | |
47 | } else { | |
48 | ret = regulator_bulk_enable(ARRAY_SIZE(lis3->regulators), | |
49 | lis3->regulators); | |
50 | /* Chip needs time to wakeup. Not mentioned in datasheet */ | |
51 | usleep_range(10000, 20000); | |
52 | } | |
53 | return ret; | |
54 | } | |
55 | ||
312ea07b SO |
56 | static inline s32 lis3_i2c_write(struct lis3lv02d *lis3, int reg, u8 value) |
57 | { | |
58 | struct i2c_client *c = lis3->bus_priv; | |
59 | return i2c_smbus_write_byte_data(c, reg, value); | |
60 | } | |
61 | ||
62 | static inline s32 lis3_i2c_read(struct lis3lv02d *lis3, int reg, u8 *v) | |
63 | { | |
64 | struct i2c_client *c = lis3->bus_priv; | |
65 | *v = i2c_smbus_read_byte_data(c, reg); | |
66 | return 0; | |
67 | } | |
68 | ||
69 | static int lis3_i2c_init(struct lis3lv02d *lis3) | |
70 | { | |
71 | u8 reg; | |
72 | int ret; | |
73 | ||
f9deb41f SO |
74 | if (lis3->reg_ctrl) |
75 | lis3_reg_ctrl(lis3, LIS3_REG_ON); | |
76 | ||
77 | lis3->read(lis3, WHO_AM_I, ®); | |
78 | if (reg != lis3->whoami) | |
79 | printk(KERN_ERR "lis3: power on failure\n"); | |
80 | ||
312ea07b SO |
81 | /* power up the device */ |
82 | ret = lis3->read(lis3, CTRL_REG1, ®); | |
83 | if (ret < 0) | |
84 | return ret; | |
85 | ||
ed37d7f6 | 86 | reg |= CTRL1_PD0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen; |
312ea07b SO |
87 | return lis3->write(lis3, CTRL_REG1, reg); |
88 | } | |
89 | ||
90 | /* Default axis mapping but it can be overwritten by platform data */ | |
2ee32144 TI |
91 | static union axis_conversion lis3lv02d_axis_map = |
92 | { .as_array = { LIS3_DEV_X, LIS3_DEV_Y, LIS3_DEV_Z } }; | |
312ea07b SO |
93 | |
94 | static int __devinit lis3lv02d_i2c_probe(struct i2c_client *client, | |
95 | const struct i2c_device_id *id) | |
96 | { | |
97 | int ret = 0; | |
98 | struct lis3lv02d_platform_data *pdata = client->dev.platform_data; | |
99 | ||
100 | if (pdata) { | |
f9deb41f SO |
101 | /* Regulator control is optional */ |
102 | if (pdata->driver_features & LIS3_USE_REGULATOR_CTRL) | |
103 | lis3_dev.reg_ctrl = lis3_reg_ctrl; | |
104 | ||
312ea07b SO |
105 | if (pdata->axis_x) |
106 | lis3lv02d_axis_map.x = pdata->axis_x; | |
107 | ||
108 | if (pdata->axis_y) | |
109 | lis3lv02d_axis_map.y = pdata->axis_y; | |
110 | ||
111 | if (pdata->axis_z) | |
112 | lis3lv02d_axis_map.z = pdata->axis_z; | |
113 | ||
114 | if (pdata->setup_resources) | |
115 | ret = pdata->setup_resources(); | |
116 | ||
117 | if (ret) | |
118 | goto fail; | |
119 | } | |
120 | ||
f9deb41f SO |
121 | if (lis3_dev.reg_ctrl) { |
122 | lis3_dev.regulators[0].supply = reg_vdd; | |
123 | lis3_dev.regulators[1].supply = reg_vdd_io; | |
124 | ret = regulator_bulk_get(&client->dev, | |
125 | ARRAY_SIZE(lis3_dev.regulators), | |
126 | lis3_dev.regulators); | |
127 | if (ret < 0) | |
128 | goto fail; | |
129 | } | |
130 | ||
312ea07b SO |
131 | lis3_dev.pdata = pdata; |
132 | lis3_dev.bus_priv = client; | |
133 | lis3_dev.init = lis3_i2c_init; | |
134 | lis3_dev.read = lis3_i2c_read; | |
135 | lis3_dev.write = lis3_i2c_write; | |
136 | lis3_dev.irq = client->irq; | |
137 | lis3_dev.ac = lis3lv02d_axis_map; | |
2a346996 | 138 | lis3_dev.pm_dev = &client->dev; |
312ea07b SO |
139 | |
140 | i2c_set_clientdata(client, &lis3_dev); | |
f9deb41f SO |
141 | |
142 | /* Provide power over the init call */ | |
143 | if (lis3_dev.reg_ctrl) | |
144 | lis3_reg_ctrl(&lis3_dev, LIS3_REG_ON); | |
145 | ||
312ea07b | 146 | ret = lis3lv02d_init_device(&lis3_dev); |
f9deb41f SO |
147 | |
148 | if (lis3_dev.reg_ctrl) | |
149 | lis3_reg_ctrl(&lis3_dev, LIS3_REG_OFF); | |
312ea07b SO |
150 | fail: |
151 | return ret; | |
152 | } | |
153 | ||
154 | static int __devexit lis3lv02d_i2c_remove(struct i2c_client *client) | |
155 | { | |
f9deb41f | 156 | struct lis3lv02d *lis3 = i2c_get_clientdata(client); |
312ea07b SO |
157 | struct lis3lv02d_platform_data *pdata = client->dev.platform_data; |
158 | ||
159 | if (pdata && pdata->release_resources) | |
160 | pdata->release_resources(); | |
161 | ||
162 | lis3lv02d_joystick_disable(); | |
f9deb41f | 163 | lis3lv02d_remove_fs(&lis3_dev); |
312ea07b | 164 | |
f9deb41f SO |
165 | if (lis3_dev.reg_ctrl) |
166 | regulator_bulk_free(ARRAY_SIZE(lis3->regulators), | |
167 | lis3_dev.regulators); | |
168 | return 0; | |
312ea07b SO |
169 | } |
170 | ||
171 | #ifdef CONFIG_PM | |
2a346996 | 172 | static int lis3lv02d_i2c_suspend(struct device *dev) |
312ea07b | 173 | { |
2a346996 | 174 | struct i2c_client *client = container_of(dev, struct i2c_client, dev); |
312ea07b SO |
175 | struct lis3lv02d *lis3 = i2c_get_clientdata(client); |
176 | ||
5facb097 | 177 | if (!lis3->pdata || !lis3->pdata->wakeup_flags) |
312ea07b SO |
178 | lis3lv02d_poweroff(lis3); |
179 | return 0; | |
180 | } | |
181 | ||
2a346996 | 182 | static int lis3lv02d_i2c_resume(struct device *dev) |
312ea07b | 183 | { |
2a346996 | 184 | struct i2c_client *client = container_of(dev, struct i2c_client, dev); |
312ea07b SO |
185 | struct lis3lv02d *lis3 = i2c_get_clientdata(client); |
186 | ||
2a346996 SO |
187 | /* |
188 | * pm_runtime documentation says that devices should always | |
189 | * be powered on at resume. Pm_runtime turns them off after system | |
190 | * wide resume is complete. | |
191 | */ | |
192 | if (!lis3->pdata || !lis3->pdata->wakeup_flags || | |
193 | pm_runtime_suspended(dev)) | |
312ea07b | 194 | lis3lv02d_poweron(lis3); |
312ea07b | 195 | |
2a346996 | 196 | return 0; |
312ea07b SO |
197 | } |
198 | #else | |
199 | #define lis3lv02d_i2c_suspend NULL | |
200 | #define lis3lv02d_i2c_resume NULL | |
201 | #define lis3lv02d_i2c_shutdown NULL | |
202 | #endif | |
203 | ||
2a346996 SO |
204 | static int lis3_i2c_runtime_suspend(struct device *dev) |
205 | { | |
206 | struct i2c_client *client = container_of(dev, struct i2c_client, dev); | |
207 | struct lis3lv02d *lis3 = i2c_get_clientdata(client); | |
208 | ||
209 | lis3lv02d_poweroff(lis3); | |
210 | return 0; | |
211 | } | |
212 | ||
213 | static int lis3_i2c_runtime_resume(struct device *dev) | |
214 | { | |
215 | struct i2c_client *client = container_of(dev, struct i2c_client, dev); | |
216 | struct lis3lv02d *lis3 = i2c_get_clientdata(client); | |
217 | ||
218 | lis3lv02d_poweron(lis3); | |
219 | return 0; | |
220 | } | |
221 | ||
312ea07b SO |
222 | static const struct i2c_device_id lis3lv02d_id[] = { |
223 | {"lis3lv02d", 0 }, | |
224 | {} | |
225 | }; | |
226 | ||
227 | MODULE_DEVICE_TABLE(i2c, lis3lv02d_id); | |
228 | ||
2a346996 SO |
229 | static const struct dev_pm_ops lis3_pm_ops = { |
230 | SET_SYSTEM_SLEEP_PM_OPS(lis3lv02d_i2c_suspend, | |
231 | lis3lv02d_i2c_resume) | |
232 | SET_RUNTIME_PM_OPS(lis3_i2c_runtime_suspend, | |
233 | lis3_i2c_runtime_resume, | |
234 | NULL) | |
235 | }; | |
236 | ||
312ea07b SO |
237 | static struct i2c_driver lis3lv02d_i2c_driver = { |
238 | .driver = { | |
239 | .name = DRV_NAME, | |
240 | .owner = THIS_MODULE, | |
2a346996 | 241 | .pm = &lis3_pm_ops, |
312ea07b | 242 | }, |
312ea07b SO |
243 | .probe = lis3lv02d_i2c_probe, |
244 | .remove = __devexit_p(lis3lv02d_i2c_remove), | |
245 | .id_table = lis3lv02d_id, | |
246 | }; | |
247 | ||
248 | static int __init lis3lv02d_init(void) | |
249 | { | |
250 | return i2c_add_driver(&lis3lv02d_i2c_driver); | |
251 | } | |
252 | ||
253 | static void __exit lis3lv02d_exit(void) | |
254 | { | |
255 | i2c_del_driver(&lis3lv02d_i2c_driver); | |
256 | } | |
257 | ||
258 | MODULE_AUTHOR("Nokia Corporation"); | |
259 | MODULE_DESCRIPTION("lis3lv02d I2C interface"); | |
260 | MODULE_LICENSE("GPL"); | |
261 | ||
262 | module_init(lis3lv02d_init); | |
263 | module_exit(lis3lv02d_exit); |