]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * lm92 - Hardware monitoring driver | |
3 | * Copyright (C) 2005 Jean Delvare <khali@linux-fr.org> | |
4 | * | |
5 | * Based on the lm90 driver, with some ideas taken from the lm_sensors | |
6 | * lm92 driver as well. | |
7 | * | |
8 | * The LM92 is a sensor chip made by National Semiconductor. It reports | |
9 | * its own temperature with a 0.0625 deg resolution and a 0.33 deg | |
10 | * accuracy. Complete datasheet can be obtained from National's website | |
11 | * at: | |
12 | * http://www.national.com/pf/LM/LM92.html | |
13 | * | |
14 | * This driver also supports the MAX6635 sensor chip made by Maxim. | |
15 | * This chip is compatible with the LM92, but has a lesser accuracy | |
16 | * (1.0 deg). Complete datasheet can be obtained from Maxim's website | |
17 | * at: | |
18 | * http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3074 | |
19 | * | |
20 | * Since the LM92 was the first chipset supported by this driver, most | |
21 | * comments will refer to this chipset, but are actually general and | |
22 | * concern all supported chipsets, unless mentioned otherwise. | |
23 | * | |
24 | * Support could easily be added for the National Semiconductor LM76 | |
25 | * and Maxim MAX6633 and MAX6634 chips, which are mostly compatible | |
26 | * with the LM92. | |
27 | * | |
28 | * This program is free software; you can redistribute it and/or modify | |
29 | * it under the terms of the GNU General Public License as published by | |
30 | * the Free Software Foundation; either version 2 of the License, or | |
31 | * (at your option) any later version. | |
32 | * | |
33 | * This program is distributed in the hope that it will be useful, | |
34 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
35 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
36 | * GNU General Public License for more details. | |
37 | * | |
38 | * You should have received a copy of the GNU General Public License | |
39 | * along with this program; if not, write to the Free Software | |
40 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
41 | */ | |
42 | ||
43 | #include <linux/module.h> | |
44 | #include <linux/init.h> | |
45 | #include <linux/slab.h> | |
46 | #include <linux/i2c.h> | |
943b0830 | 47 | #include <linux/hwmon.h> |
6cb59e91 | 48 | #include <linux/hwmon-sysfs.h> |
943b0830 | 49 | #include <linux/err.h> |
9a61bf63 | 50 | #include <linux/mutex.h> |
1da177e4 LT |
51 | |
52 | /* The LM92 and MAX6635 have 2 two-state pins for address selection, | |
53 | resulting in 4 possible addresses. */ | |
25e9c86d MH |
54 | static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, |
55 | I2C_CLIENT_END }; | |
1da177e4 LT |
56 | |
57 | /* Insmod parameters */ | |
f4b50261 | 58 | I2C_CLIENT_INSMOD_1(lm92); |
1da177e4 LT |
59 | |
60 | /* The LM92 registers */ | |
61 | #define LM92_REG_CONFIG 0x01 /* 8-bit, RW */ | |
62 | #define LM92_REG_TEMP 0x00 /* 16-bit, RO */ | |
63 | #define LM92_REG_TEMP_HYST 0x02 /* 16-bit, RW */ | |
64 | #define LM92_REG_TEMP_CRIT 0x03 /* 16-bit, RW */ | |
65 | #define LM92_REG_TEMP_LOW 0x04 /* 16-bit, RW */ | |
66 | #define LM92_REG_TEMP_HIGH 0x05 /* 16-bit, RW */ | |
67 | #define LM92_REG_MAN_ID 0x07 /* 16-bit, RO, LM92 only */ | |
68 | ||
69 | /* The LM92 uses signed 13-bit values with LSB = 0.0625 degree Celsius, | |
70 | left-justified in 16-bit registers. No rounding is done, with such | |
71 | a resolution it's just not worth it. Note that the MAX6635 doesn't | |
72 | make use of the 4 lower bits for limits (i.e. effective resolution | |
73 | for limits is 1 degree Celsius). */ | |
74 | static inline int TEMP_FROM_REG(s16 reg) | |
75 | { | |
76 | return reg / 8 * 625 / 10; | |
77 | } | |
78 | ||
79 | static inline s16 TEMP_TO_REG(int val) | |
80 | { | |
81 | if (val <= -60000) | |
82 | return -60000 * 10 / 625 * 8; | |
83 | if (val >= 160000) | |
84 | return 160000 * 10 / 625 * 8; | |
85 | return val * 10 / 625 * 8; | |
86 | } | |
87 | ||
88 | /* Alarm flags are stored in the 3 LSB of the temperature register */ | |
89 | static inline u8 ALARMS_FROM_REG(s16 reg) | |
90 | { | |
91 | return reg & 0x0007; | |
92 | } | |
93 | ||
94 | /* Driver data (common to all clients) */ | |
95 | static struct i2c_driver lm92_driver; | |
96 | ||
97 | /* Client data (each client gets its own) */ | |
98 | struct lm92_data { | |
99 | struct i2c_client client; | |
1beeffe4 | 100 | struct device *hwmon_dev; |
9a61bf63 | 101 | struct mutex update_lock; |
1da177e4 LT |
102 | char valid; /* zero until following fields are valid */ |
103 | unsigned long last_updated; /* in jiffies */ | |
104 | ||
105 | /* registers values */ | |
106 | s16 temp1_input, temp1_crit, temp1_min, temp1_max, temp1_hyst; | |
107 | }; | |
108 | ||
109 | ||
110 | /* | |
111 | * Sysfs attributes and callback functions | |
112 | */ | |
113 | ||
114 | static struct lm92_data *lm92_update_device(struct device *dev) | |
115 | { | |
116 | struct i2c_client *client = to_i2c_client(dev); | |
117 | struct lm92_data *data = i2c_get_clientdata(client); | |
118 | ||
9a61bf63 | 119 | mutex_lock(&data->update_lock); |
1da177e4 LT |
120 | |
121 | if (time_after(jiffies, data->last_updated + HZ) | |
122 | || !data->valid) { | |
123 | dev_dbg(&client->dev, "Updating lm92 data\n"); | |
124 | data->temp1_input = swab16(i2c_smbus_read_word_data(client, | |
125 | LM92_REG_TEMP)); | |
126 | data->temp1_hyst = swab16(i2c_smbus_read_word_data(client, | |
127 | LM92_REG_TEMP_HYST)); | |
128 | data->temp1_crit = swab16(i2c_smbus_read_word_data(client, | |
129 | LM92_REG_TEMP_CRIT)); | |
130 | data->temp1_min = swab16(i2c_smbus_read_word_data(client, | |
131 | LM92_REG_TEMP_LOW)); | |
132 | data->temp1_max = swab16(i2c_smbus_read_word_data(client, | |
133 | LM92_REG_TEMP_HIGH)); | |
134 | ||
135 | data->last_updated = jiffies; | |
136 | data->valid = 1; | |
137 | } | |
138 | ||
9a61bf63 | 139 | mutex_unlock(&data->update_lock); |
1da177e4 LT |
140 | |
141 | return data; | |
142 | } | |
143 | ||
144 | #define show_temp(value) \ | |
8627f9ba | 145 | static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ |
1da177e4 LT |
146 | { \ |
147 | struct lm92_data *data = lm92_update_device(dev); \ | |
148 | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value)); \ | |
149 | } | |
150 | show_temp(temp1_input); | |
151 | show_temp(temp1_crit); | |
152 | show_temp(temp1_min); | |
153 | show_temp(temp1_max); | |
154 | ||
155 | #define set_temp(value, reg) \ | |
8627f9ba | 156 | static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, \ |
1da177e4 LT |
157 | size_t count) \ |
158 | { \ | |
159 | struct i2c_client *client = to_i2c_client(dev); \ | |
160 | struct lm92_data *data = i2c_get_clientdata(client); \ | |
161 | long val = simple_strtol(buf, NULL, 10); \ | |
162 | \ | |
9a61bf63 | 163 | mutex_lock(&data->update_lock); \ |
1da177e4 LT |
164 | data->value = TEMP_TO_REG(val); \ |
165 | i2c_smbus_write_word_data(client, reg, swab16(data->value)); \ | |
9a61bf63 | 166 | mutex_unlock(&data->update_lock); \ |
1da177e4 LT |
167 | return count; \ |
168 | } | |
169 | set_temp(temp1_crit, LM92_REG_TEMP_CRIT); | |
170 | set_temp(temp1_min, LM92_REG_TEMP_LOW); | |
171 | set_temp(temp1_max, LM92_REG_TEMP_HIGH); | |
172 | ||
8627f9ba | 173 | static ssize_t show_temp1_crit_hyst(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
174 | { |
175 | struct lm92_data *data = lm92_update_device(dev); | |
176 | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp1_crit) | |
177 | - TEMP_FROM_REG(data->temp1_hyst)); | |
178 | } | |
8627f9ba | 179 | static ssize_t show_temp1_max_hyst(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
180 | { |
181 | struct lm92_data *data = lm92_update_device(dev); | |
182 | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp1_max) | |
183 | - TEMP_FROM_REG(data->temp1_hyst)); | |
184 | } | |
8627f9ba | 185 | static ssize_t show_temp1_min_hyst(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
186 | { |
187 | struct lm92_data *data = lm92_update_device(dev); | |
188 | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp1_min) | |
189 | + TEMP_FROM_REG(data->temp1_hyst)); | |
190 | } | |
191 | ||
8627f9ba | 192 | static ssize_t set_temp1_crit_hyst(struct device *dev, struct device_attribute *attr, const char *buf, |
1da177e4 LT |
193 | size_t count) |
194 | { | |
195 | struct i2c_client *client = to_i2c_client(dev); | |
196 | struct lm92_data *data = i2c_get_clientdata(client); | |
197 | long val = simple_strtol(buf, NULL, 10); | |
198 | ||
9a61bf63 | 199 | mutex_lock(&data->update_lock); |
1da177e4 LT |
200 | data->temp1_hyst = TEMP_FROM_REG(data->temp1_crit) - val; |
201 | i2c_smbus_write_word_data(client, LM92_REG_TEMP_HYST, | |
202 | swab16(TEMP_TO_REG(data->temp1_hyst))); | |
9a61bf63 | 203 | mutex_unlock(&data->update_lock); |
1da177e4 LT |
204 | return count; |
205 | } | |
206 | ||
8627f9ba | 207 | static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
208 | { |
209 | struct lm92_data *data = lm92_update_device(dev); | |
210 | return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->temp1_input)); | |
211 | } | |
212 | ||
6cb59e91 JD |
213 | static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, |
214 | char *buf) | |
215 | { | |
216 | int bitnr = to_sensor_dev_attr(attr)->index; | |
217 | struct lm92_data *data = lm92_update_device(dev); | |
218 | return sprintf(buf, "%d\n", (data->temp1_input >> bitnr) & 1); | |
219 | } | |
220 | ||
1da177e4 LT |
221 | static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp1_input, NULL); |
222 | static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp1_crit, | |
223 | set_temp1_crit); | |
224 | static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temp1_crit_hyst, | |
225 | set_temp1_crit_hyst); | |
226 | static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp1_min, | |
227 | set_temp1_min); | |
228 | static DEVICE_ATTR(temp1_min_hyst, S_IRUGO, show_temp1_min_hyst, NULL); | |
229 | static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp1_max, | |
230 | set_temp1_max); | |
231 | static DEVICE_ATTR(temp1_max_hyst, S_IRUGO, show_temp1_max_hyst, NULL); | |
232 | static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); | |
6cb59e91 JD |
233 | static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 2); |
234 | static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, 0); | |
235 | static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 1); | |
1da177e4 LT |
236 | |
237 | ||
238 | /* | |
239 | * Detection and registration | |
240 | */ | |
241 | ||
242 | static void lm92_init_client(struct i2c_client *client) | |
243 | { | |
244 | u8 config; | |
245 | ||
246 | /* Start the conversions if needed */ | |
247 | config = i2c_smbus_read_byte_data(client, LM92_REG_CONFIG); | |
248 | if (config & 0x01) | |
249 | i2c_smbus_write_byte_data(client, LM92_REG_CONFIG, | |
250 | config & 0xFE); | |
251 | } | |
252 | ||
253 | /* The MAX6635 has no identification register, so we have to use tricks | |
254 | to identify it reliably. This is somewhat slow. | |
255 | Note that we do NOT rely on the 2 MSB of the configuration register | |
256 | always reading 0, as suggested by the datasheet, because it was once | |
257 | reported not to be true. */ | |
258 | static int max6635_check(struct i2c_client *client) | |
259 | { | |
260 | u16 temp_low, temp_high, temp_hyst, temp_crit; | |
261 | u8 conf; | |
262 | int i; | |
263 | ||
264 | /* No manufacturer ID register, so a read from this address will | |
265 | always return the last read value. */ | |
266 | temp_low = i2c_smbus_read_word_data(client, LM92_REG_TEMP_LOW); | |
267 | if (i2c_smbus_read_word_data(client, LM92_REG_MAN_ID) != temp_low) | |
268 | return 0; | |
269 | temp_high = i2c_smbus_read_word_data(client, LM92_REG_TEMP_HIGH); | |
270 | if (i2c_smbus_read_word_data(client, LM92_REG_MAN_ID) != temp_high) | |
271 | return 0; | |
272 | ||
273 | /* Limits are stored as integer values (signed, 9-bit). */ | |
274 | if ((temp_low & 0x7f00) || (temp_high & 0x7f00)) | |
275 | return 0; | |
276 | temp_hyst = i2c_smbus_read_word_data(client, LM92_REG_TEMP_HYST); | |
277 | temp_crit = i2c_smbus_read_word_data(client, LM92_REG_TEMP_CRIT); | |
278 | if ((temp_hyst & 0x7f00) || (temp_crit & 0x7f00)) | |
279 | return 0; | |
280 | ||
281 | /* Registers addresses were found to cycle over 16-byte boundaries. | |
282 | We don't test all registers with all offsets so as to save some | |
283 | reads and time, but this should still be sufficient to dismiss | |
284 | non-MAX6635 chips. */ | |
285 | conf = i2c_smbus_read_byte_data(client, LM92_REG_CONFIG); | |
286 | for (i=16; i<96; i*=2) { | |
287 | if (temp_hyst != i2c_smbus_read_word_data(client, | |
288 | LM92_REG_TEMP_HYST + i - 16) | |
289 | || temp_crit != i2c_smbus_read_word_data(client, | |
290 | LM92_REG_TEMP_CRIT + i) | |
291 | || temp_low != i2c_smbus_read_word_data(client, | |
292 | LM92_REG_TEMP_LOW + i + 16) | |
293 | || temp_high != i2c_smbus_read_word_data(client, | |
294 | LM92_REG_TEMP_HIGH + i + 32) | |
295 | || conf != i2c_smbus_read_byte_data(client, | |
296 | LM92_REG_CONFIG + i)) | |
297 | return 0; | |
298 | } | |
299 | ||
300 | return 1; | |
301 | } | |
302 | ||
0501a381 MH |
303 | static struct attribute *lm92_attributes[] = { |
304 | &dev_attr_temp1_input.attr, | |
305 | &dev_attr_temp1_crit.attr, | |
306 | &dev_attr_temp1_crit_hyst.attr, | |
307 | &dev_attr_temp1_min.attr, | |
308 | &dev_attr_temp1_min_hyst.attr, | |
309 | &dev_attr_temp1_max.attr, | |
310 | &dev_attr_temp1_max_hyst.attr, | |
311 | &dev_attr_alarms.attr, | |
6cb59e91 JD |
312 | &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, |
313 | &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, | |
314 | &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, | |
0501a381 MH |
315 | NULL |
316 | }; | |
317 | ||
318 | static const struct attribute_group lm92_group = { | |
319 | .attrs = lm92_attributes, | |
320 | }; | |
321 | ||
1da177e4 LT |
322 | /* The following function does more than just detection. If detection |
323 | succeeds, it also registers the new chip. */ | |
324 | static int lm92_detect(struct i2c_adapter *adapter, int address, int kind) | |
325 | { | |
326 | struct i2c_client *new_client; | |
327 | struct lm92_data *data; | |
328 | int err = 0; | |
329 | char *name; | |
330 | ||
331 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | |
332 | | I2C_FUNC_SMBUS_WORD_DATA)) | |
333 | goto exit; | |
334 | ||
ba9c2e8d | 335 | if (!(data = kzalloc(sizeof(struct lm92_data), GFP_KERNEL))) { |
1da177e4 LT |
336 | err = -ENOMEM; |
337 | goto exit; | |
338 | } | |
1da177e4 LT |
339 | |
340 | /* Fill in enough client fields so that we can read from the chip, | |
341 | which is required for identication */ | |
342 | new_client = &data->client; | |
343 | i2c_set_clientdata(new_client, data); | |
344 | new_client->addr = address; | |
345 | new_client->adapter = adapter; | |
346 | new_client->driver = &lm92_driver; | |
347 | new_client->flags = 0; | |
348 | ||
349 | /* A negative kind means that the driver was loaded with no force | |
350 | parameter (default), so we must identify the chip. */ | |
351 | if (kind < 0) { | |
352 | u8 config = i2c_smbus_read_byte_data(new_client, | |
353 | LM92_REG_CONFIG); | |
354 | u16 man_id = i2c_smbus_read_word_data(new_client, | |
355 | LM92_REG_MAN_ID); | |
356 | ||
357 | if ((config & 0xe0) == 0x00 | |
358 | && man_id == 0x0180) { | |
359 | pr_info("lm92: Found National Semiconductor LM92 chip\n"); | |
360 | kind = lm92; | |
361 | } else | |
362 | if (max6635_check(new_client)) { | |
363 | pr_info("lm92: Found Maxim MAX6635 chip\n"); | |
364 | kind = lm92; /* No separate prefix */ | |
365 | } | |
366 | else | |
367 | goto exit_free; | |
368 | } else | |
369 | if (kind == 0) /* Default to an LM92 if forced */ | |
370 | kind = lm92; | |
371 | ||
372 | /* Give it the proper name */ | |
373 | if (kind == lm92) { | |
374 | name = "lm92"; | |
375 | } else { /* Supposedly cannot happen */ | |
376 | dev_dbg(&new_client->dev, "Kind out of range?\n"); | |
377 | goto exit_free; | |
378 | } | |
379 | ||
380 | /* Fill in the remaining client fields */ | |
381 | strlcpy(new_client->name, name, I2C_NAME_SIZE); | |
382 | data->valid = 0; | |
9a61bf63 | 383 | mutex_init(&data->update_lock); |
1da177e4 LT |
384 | |
385 | /* Tell the i2c subsystem a new client has arrived */ | |
386 | if ((err = i2c_attach_client(new_client))) | |
387 | goto exit_free; | |
388 | ||
389 | /* Initialize the chipset */ | |
390 | lm92_init_client(new_client); | |
391 | ||
392 | /* Register sysfs hooks */ | |
0501a381 MH |
393 | if ((err = sysfs_create_group(&new_client->dev.kobj, &lm92_group))) |
394 | goto exit_detach; | |
395 | ||
1beeffe4 TJ |
396 | data->hwmon_dev = hwmon_device_register(&new_client->dev); |
397 | if (IS_ERR(data->hwmon_dev)) { | |
398 | err = PTR_ERR(data->hwmon_dev); | |
0501a381 | 399 | goto exit_remove; |
943b0830 MH |
400 | } |
401 | ||
1da177e4 LT |
402 | return 0; |
403 | ||
0501a381 MH |
404 | exit_remove: |
405 | sysfs_remove_group(&new_client->dev.kobj, &lm92_group); | |
943b0830 MH |
406 | exit_detach: |
407 | i2c_detach_client(new_client); | |
1da177e4 LT |
408 | exit_free: |
409 | kfree(data); | |
410 | exit: | |
411 | return err; | |
412 | } | |
413 | ||
414 | static int lm92_attach_adapter(struct i2c_adapter *adapter) | |
415 | { | |
416 | if (!(adapter->class & I2C_CLASS_HWMON)) | |
417 | return 0; | |
2ed2dc3c | 418 | return i2c_probe(adapter, &addr_data, lm92_detect); |
1da177e4 LT |
419 | } |
420 | ||
421 | static int lm92_detach_client(struct i2c_client *client) | |
422 | { | |
943b0830 | 423 | struct lm92_data *data = i2c_get_clientdata(client); |
1da177e4 LT |
424 | int err; |
425 | ||
1beeffe4 | 426 | hwmon_device_unregister(data->hwmon_dev); |
0501a381 | 427 | sysfs_remove_group(&client->dev.kobj, &lm92_group); |
943b0830 | 428 | |
7bef5594 | 429 | if ((err = i2c_detach_client(client))) |
1da177e4 | 430 | return err; |
1da177e4 | 431 | |
943b0830 | 432 | kfree(data); |
1da177e4 LT |
433 | return 0; |
434 | } | |
435 | ||
436 | ||
437 | /* | |
438 | * Module and driver stuff | |
439 | */ | |
440 | ||
441 | static struct i2c_driver lm92_driver = { | |
cdaf7934 | 442 | .driver = { |
cdaf7934 LR |
443 | .name = "lm92", |
444 | }, | |
1da177e4 LT |
445 | .attach_adapter = lm92_attach_adapter, |
446 | .detach_client = lm92_detach_client, | |
447 | }; | |
448 | ||
449 | static int __init sensors_lm92_init(void) | |
450 | { | |
451 | return i2c_add_driver(&lm92_driver); | |
452 | } | |
453 | ||
454 | static void __exit sensors_lm92_exit(void) | |
455 | { | |
456 | i2c_del_driver(&lm92_driver); | |
457 | } | |
458 | ||
459 | MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); | |
460 | MODULE_DESCRIPTION("LM92/MAX6635 driver"); | |
461 | MODULE_LICENSE("GPL"); | |
462 | ||
463 | module_init(sensors_lm92_init); | |
464 | module_exit(sensors_lm92_exit); |