]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * max1619.c - Part of lm_sensors, Linux kernel modules for hardware | |
3 | * monitoring | |
4 | * Copyright (C) 2003-2004 Alexey Fisher <fishor@mail.ru> | |
5 | * Jean Delvare <khali@linux-fr.org> | |
6 | * | |
7 | * Based on the lm90 driver. The MAX1619 is a sensor chip made by Maxim. | |
8 | * It reports up to two temperatures (its own plus up to | |
9 | * one external one). Complete datasheet can be | |
10 | * obtained from Maxim's website at: | |
11 | * http://pdfserv.maxim-ic.com/en/ds/MAX1619.pdf | |
12 | * | |
13 | * This program is free software; you can redistribute it and/or modify | |
14 | * it under the terms of the GNU General Public License as published by | |
15 | * the Free Software Foundation; either version 2 of the License, or | |
16 | * (at your option) any later version. | |
17 | * | |
18 | * This program is distributed in the hope that it will be useful, | |
19 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
20 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
21 | * GNU General Public License for more details. | |
22 | * | |
23 | * You should have received a copy of the GNU General Public License | |
24 | * along with this program; if not, write to the Free Software | |
25 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
26 | */ | |
27 | ||
28 | ||
1da177e4 LT |
29 | #include <linux/module.h> |
30 | #include <linux/init.h> | |
31 | #include <linux/slab.h> | |
32 | #include <linux/jiffies.h> | |
33 | #include <linux/i2c.h> | |
943b0830 MH |
34 | #include <linux/hwmon.h> |
35 | #include <linux/err.h> | |
1da177e4 LT |
36 | |
37 | static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a, | |
38 | 0x29, 0x2a, 0x2b, | |
39 | 0x4c, 0x4d, 0x4e, | |
40 | I2C_CLIENT_END }; | |
1da177e4 LT |
41 | |
42 | /* | |
43 | * Insmod parameters | |
44 | */ | |
45 | ||
f4b50261 | 46 | I2C_CLIENT_INSMOD_1(max1619); |
1da177e4 LT |
47 | |
48 | /* | |
49 | * The MAX1619 registers | |
50 | */ | |
51 | ||
52 | #define MAX1619_REG_R_MAN_ID 0xFE | |
53 | #define MAX1619_REG_R_CHIP_ID 0xFF | |
54 | #define MAX1619_REG_R_CONFIG 0x03 | |
55 | #define MAX1619_REG_W_CONFIG 0x09 | |
56 | #define MAX1619_REG_R_CONVRATE 0x04 | |
57 | #define MAX1619_REG_W_CONVRATE 0x0A | |
58 | #define MAX1619_REG_R_STATUS 0x02 | |
59 | #define MAX1619_REG_R_LOCAL_TEMP 0x00 | |
60 | #define MAX1619_REG_R_REMOTE_TEMP 0x01 | |
61 | #define MAX1619_REG_R_REMOTE_HIGH 0x07 | |
62 | #define MAX1619_REG_W_REMOTE_HIGH 0x0D | |
63 | #define MAX1619_REG_R_REMOTE_LOW 0x08 | |
64 | #define MAX1619_REG_W_REMOTE_LOW 0x0E | |
65 | #define MAX1619_REG_R_REMOTE_CRIT 0x10 | |
66 | #define MAX1619_REG_W_REMOTE_CRIT 0x12 | |
67 | #define MAX1619_REG_R_TCRIT_HYST 0x11 | |
68 | #define MAX1619_REG_W_TCRIT_HYST 0x13 | |
69 | ||
70 | /* | |
71 | * Conversions and various macros | |
72 | */ | |
73 | ||
74 | #define TEMP_FROM_REG(val) ((val & 0x80 ? val-0x100 : val) * 1000) | |
75 | #define TEMP_TO_REG(val) ((val < 0 ? val+0x100*1000 : val) / 1000) | |
76 | ||
77 | /* | |
78 | * Functions declaration | |
79 | */ | |
80 | ||
81 | static int max1619_attach_adapter(struct i2c_adapter *adapter); | |
82 | static int max1619_detect(struct i2c_adapter *adapter, int address, | |
83 | int kind); | |
84 | static void max1619_init_client(struct i2c_client *client); | |
85 | static int max1619_detach_client(struct i2c_client *client); | |
86 | static struct max1619_data *max1619_update_device(struct device *dev); | |
87 | ||
88 | /* | |
89 | * Driver data (common to all clients) | |
90 | */ | |
91 | ||
92 | static struct i2c_driver max1619_driver = { | |
93 | .owner = THIS_MODULE, | |
94 | .name = "max1619", | |
95 | .flags = I2C_DF_NOTIFY, | |
96 | .attach_adapter = max1619_attach_adapter, | |
97 | .detach_client = max1619_detach_client, | |
98 | }; | |
99 | ||
100 | /* | |
101 | * Client data (each client gets its own) | |
102 | */ | |
103 | ||
104 | struct max1619_data { | |
105 | struct i2c_client client; | |
943b0830 | 106 | struct class_device *class_dev; |
1da177e4 LT |
107 | struct semaphore update_lock; |
108 | char valid; /* zero until following fields are valid */ | |
109 | unsigned long last_updated; /* in jiffies */ | |
110 | ||
111 | /* registers values */ | |
112 | u8 temp_input1; /* local */ | |
113 | u8 temp_input2, temp_low2, temp_high2; /* remote */ | |
114 | u8 temp_crit2; | |
115 | u8 temp_hyst2; | |
116 | u8 alarms; | |
117 | }; | |
118 | ||
119 | /* | |
120 | * Sysfs stuff | |
121 | */ | |
122 | ||
123 | #define show_temp(value) \ | |
8627f9ba | 124 | static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ |
1da177e4 LT |
125 | { \ |
126 | struct max1619_data *data = max1619_update_device(dev); \ | |
127 | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value)); \ | |
128 | } | |
129 | show_temp(temp_input1); | |
130 | show_temp(temp_input2); | |
131 | show_temp(temp_low2); | |
132 | show_temp(temp_high2); | |
133 | show_temp(temp_crit2); | |
134 | show_temp(temp_hyst2); | |
135 | ||
136 | #define set_temp2(value, reg) \ | |
8627f9ba | 137 | static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, \ |
1da177e4 LT |
138 | size_t count) \ |
139 | { \ | |
140 | struct i2c_client *client = to_i2c_client(dev); \ | |
141 | struct max1619_data *data = i2c_get_clientdata(client); \ | |
142 | long val = simple_strtol(buf, NULL, 10); \ | |
143 | \ | |
144 | down(&data->update_lock); \ | |
145 | data->value = TEMP_TO_REG(val); \ | |
146 | i2c_smbus_write_byte_data(client, reg, data->value); \ | |
147 | up(&data->update_lock); \ | |
148 | return count; \ | |
149 | } | |
150 | ||
151 | set_temp2(temp_low2, MAX1619_REG_W_REMOTE_LOW); | |
152 | set_temp2(temp_high2, MAX1619_REG_W_REMOTE_HIGH); | |
153 | set_temp2(temp_crit2, MAX1619_REG_W_REMOTE_CRIT); | |
154 | set_temp2(temp_hyst2, MAX1619_REG_W_TCRIT_HYST); | |
155 | ||
8627f9ba | 156 | static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
157 | { |
158 | struct max1619_data *data = max1619_update_device(dev); | |
159 | return sprintf(buf, "%d\n", data->alarms); | |
160 | } | |
161 | ||
162 | static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL); | |
163 | static DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_input2, NULL); | |
164 | static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_low2, | |
165 | set_temp_low2); | |
166 | static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_high2, | |
167 | set_temp_high2); | |
168 | static DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp_crit2, | |
169 | set_temp_crit2); | |
170 | static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp_hyst2, | |
171 | set_temp_hyst2); | |
172 | static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); | |
173 | ||
174 | /* | |
175 | * Real code | |
176 | */ | |
177 | ||
178 | static int max1619_attach_adapter(struct i2c_adapter *adapter) | |
179 | { | |
180 | if (!(adapter->class & I2C_CLASS_HWMON)) | |
181 | return 0; | |
2ed2dc3c | 182 | return i2c_probe(adapter, &addr_data, max1619_detect); |
1da177e4 LT |
183 | } |
184 | ||
185 | /* | |
186 | * The following function does more than just detection. If detection | |
187 | * succeeds, it also registers the new chip. | |
188 | */ | |
189 | static int max1619_detect(struct i2c_adapter *adapter, int address, int kind) | |
190 | { | |
191 | struct i2c_client *new_client; | |
192 | struct max1619_data *data; | |
193 | int err = 0; | |
194 | const char *name = ""; | |
195 | u8 reg_config=0, reg_convrate=0, reg_status=0; | |
b0020e3f | 196 | |
1da177e4 LT |
197 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
198 | goto exit; | |
199 | ||
ba9c2e8d | 200 | if (!(data = kzalloc(sizeof(struct max1619_data), GFP_KERNEL))) { |
1da177e4 LT |
201 | err = -ENOMEM; |
202 | goto exit; | |
203 | } | |
1da177e4 LT |
204 | |
205 | /* The common I2C client data is placed right before the | |
206 | MAX1619-specific data. */ | |
207 | new_client = &data->client; | |
208 | i2c_set_clientdata(new_client, data); | |
209 | new_client->addr = address; | |
210 | new_client->adapter = adapter; | |
211 | new_client->driver = &max1619_driver; | |
212 | new_client->flags = 0; | |
213 | ||
214 | /* | |
215 | * Now we do the remaining detection. A negative kind means that | |
216 | * the driver was loaded with no force parameter (default), so we | |
217 | * must both detect and identify the chip. A zero kind means that | |
218 | * the driver was loaded with the force parameter, the detection | |
219 | * step shall be skipped. A positive kind means that the driver | |
220 | * was loaded with the force parameter and a given kind of chip is | |
221 | * requested, so both the detection and the identification steps | |
222 | * are skipped. | |
223 | */ | |
224 | if (kind < 0) { /* detection */ | |
225 | reg_config = i2c_smbus_read_byte_data(new_client, | |
226 | MAX1619_REG_R_CONFIG); | |
227 | reg_convrate = i2c_smbus_read_byte_data(new_client, | |
228 | MAX1619_REG_R_CONVRATE); | |
229 | reg_status = i2c_smbus_read_byte_data(new_client, | |
230 | MAX1619_REG_R_STATUS); | |
231 | if ((reg_config & 0x03) != 0x00 | |
232 | || reg_convrate > 0x07 || (reg_status & 0x61 ) !=0x00) { | |
233 | dev_dbg(&adapter->dev, | |
234 | "MAX1619 detection failed at 0x%02x.\n", | |
235 | address); | |
236 | goto exit_free; | |
237 | } | |
238 | } | |
239 | ||
240 | if (kind <= 0) { /* identification */ | |
b0020e3f | 241 | u8 man_id, chip_id; |
1da177e4 LT |
242 | |
243 | man_id = i2c_smbus_read_byte_data(new_client, | |
244 | MAX1619_REG_R_MAN_ID); | |
245 | chip_id = i2c_smbus_read_byte_data(new_client, | |
246 | MAX1619_REG_R_CHIP_ID); | |
247 | ||
b0020e3f AM |
248 | if ((man_id == 0x4D) && (chip_id == 0x04)) |
249 | kind = max1619; | |
1da177e4 LT |
250 | |
251 | if (kind <= 0) { /* identification failed */ | |
252 | dev_info(&adapter->dev, | |
253 | "Unsupported chip (man_id=0x%02X, " | |
254 | "chip_id=0x%02X).\n", man_id, chip_id); | |
255 | goto exit_free; | |
256 | } | |
b0020e3f | 257 | } |
1da177e4 | 258 | |
b0020e3f | 259 | if (kind == max1619) |
1da177e4 | 260 | name = "max1619"; |
1da177e4 LT |
261 | |
262 | /* We can fill in the remaining client fields */ | |
263 | strlcpy(new_client->name, name, I2C_NAME_SIZE); | |
264 | data->valid = 0; | |
265 | init_MUTEX(&data->update_lock); | |
266 | ||
267 | /* Tell the I2C layer a new client has arrived */ | |
268 | if ((err = i2c_attach_client(new_client))) | |
269 | goto exit_free; | |
270 | ||
271 | /* Initialize the MAX1619 chip */ | |
272 | max1619_init_client(new_client); | |
273 | ||
274 | /* Register sysfs hooks */ | |
943b0830 MH |
275 | data->class_dev = hwmon_device_register(&new_client->dev); |
276 | if (IS_ERR(data->class_dev)) { | |
277 | err = PTR_ERR(data->class_dev); | |
278 | goto exit_detach; | |
279 | } | |
280 | ||
1da177e4 LT |
281 | device_create_file(&new_client->dev, &dev_attr_temp1_input); |
282 | device_create_file(&new_client->dev, &dev_attr_temp2_input); | |
283 | device_create_file(&new_client->dev, &dev_attr_temp2_min); | |
284 | device_create_file(&new_client->dev, &dev_attr_temp2_max); | |
285 | device_create_file(&new_client->dev, &dev_attr_temp2_crit); | |
286 | device_create_file(&new_client->dev, &dev_attr_temp2_crit_hyst); | |
287 | device_create_file(&new_client->dev, &dev_attr_alarms); | |
288 | ||
289 | return 0; | |
290 | ||
943b0830 MH |
291 | exit_detach: |
292 | i2c_detach_client(new_client); | |
1da177e4 LT |
293 | exit_free: |
294 | kfree(data); | |
295 | exit: | |
296 | return err; | |
297 | } | |
298 | ||
299 | static void max1619_init_client(struct i2c_client *client) | |
300 | { | |
301 | u8 config; | |
302 | ||
303 | /* | |
304 | * Start the conversions. | |
305 | */ | |
306 | i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONVRATE, | |
307 | 5); /* 2 Hz */ | |
308 | config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG); | |
309 | if (config & 0x40) | |
310 | i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONFIG, | |
311 | config & 0xBF); /* run */ | |
312 | } | |
313 | ||
314 | static int max1619_detach_client(struct i2c_client *client) | |
315 | { | |
943b0830 | 316 | struct max1619_data *data = i2c_get_clientdata(client); |
1da177e4 LT |
317 | int err; |
318 | ||
943b0830 MH |
319 | hwmon_device_unregister(data->class_dev); |
320 | ||
7bef5594 | 321 | if ((err = i2c_detach_client(client))) |
1da177e4 | 322 | return err; |
1da177e4 | 323 | |
943b0830 | 324 | kfree(data); |
1da177e4 LT |
325 | return 0; |
326 | } | |
327 | ||
328 | static struct max1619_data *max1619_update_device(struct device *dev) | |
329 | { | |
330 | struct i2c_client *client = to_i2c_client(dev); | |
331 | struct max1619_data *data = i2c_get_clientdata(client); | |
332 | ||
333 | down(&data->update_lock); | |
334 | ||
335 | if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) { | |
336 | dev_dbg(&client->dev, "Updating max1619 data.\n"); | |
337 | data->temp_input1 = i2c_smbus_read_byte_data(client, | |
338 | MAX1619_REG_R_LOCAL_TEMP); | |
339 | data->temp_input2 = i2c_smbus_read_byte_data(client, | |
340 | MAX1619_REG_R_REMOTE_TEMP); | |
341 | data->temp_high2 = i2c_smbus_read_byte_data(client, | |
342 | MAX1619_REG_R_REMOTE_HIGH); | |
343 | data->temp_low2 = i2c_smbus_read_byte_data(client, | |
344 | MAX1619_REG_R_REMOTE_LOW); | |
345 | data->temp_crit2 = i2c_smbus_read_byte_data(client, | |
346 | MAX1619_REG_R_REMOTE_CRIT); | |
347 | data->temp_hyst2 = i2c_smbus_read_byte_data(client, | |
348 | MAX1619_REG_R_TCRIT_HYST); | |
349 | data->alarms = i2c_smbus_read_byte_data(client, | |
350 | MAX1619_REG_R_STATUS); | |
351 | ||
352 | data->last_updated = jiffies; | |
353 | data->valid = 1; | |
354 | } | |
355 | ||
356 | up(&data->update_lock); | |
357 | ||
358 | return data; | |
359 | } | |
360 | ||
361 | static int __init sensors_max1619_init(void) | |
362 | { | |
363 | return i2c_add_driver(&max1619_driver); | |
364 | } | |
365 | ||
366 | static void __exit sensors_max1619_exit(void) | |
367 | { | |
368 | i2c_del_driver(&max1619_driver); | |
369 | } | |
370 | ||
368609c5 | 371 | MODULE_AUTHOR("Alexey Fisher <fishor@mail.ru> and " |
1da177e4 LT |
372 | "Jean Delvare <khali@linux-fr.org>"); |
373 | MODULE_DESCRIPTION("MAX1619 sensor driver"); | |
374 | MODULE_LICENSE("GPL"); | |
375 | ||
376 | module_init(sensors_max1619_init); | |
377 | module_exit(sensors_max1619_exit); |