[mirror_ubuntu-bionic-kernel.git] / drivers / hwmon / pmbus / Kconfig

#
# PMBus chip drivers configuration
#

menuconfig PMBUS
	tristate "PMBus support"
	depends on I2C && EXPERIMENTAL
	default n
	help
	  Say yes here if you want to enable PMBus support.

	  This driver can also be built as a module. If so, the module will
	  be called pmbus_core.

if PMBUS

config SENSORS_PMBUS
	tristate "Generic PMBus devices"
	default y
	help
	  If you say yes here you get hardware monitoring support for generic
	  PMBus devices, including but not limited to ADP4000, BMR453, BMR454,
	  NCP4200, and NCP4208.

	  This driver can also be built as a module. If so, the module will
	  be called pmbus.

config SENSORS_ADM1275
	tristate "Analog Devices ADM1275 and compatibles"
	default n
	help
	  If you say yes here you get hardware monitoring support for Analog
	  Devices ADM1275 and ADM1276 Hot-Swap Controller and Digital Power
	  Monitor.

	  This driver can also be built as a module. If so, the module will
	  be called adm1275.

config SENSORS_LM25066
	tristate "National Semiconductor LM25066 and compatibles"
	default n
	help
	  If you say yes here you get hardware monitoring support for National
	  Semiconductor LM25066, LM5064, and LM5066.

	  This driver can also be built as a module. If so, the module will
	  be called lm25066.

config SENSORS_LTC2978
	tristate "Linear Technologies LTC2978 and LTC3880"
	default n
	help
	  If you say yes here you get hardware monitoring support for Linear
	  Technology LTC2978 and LTC3880.

	  This driver can also be built as a module. If so, the module will
	  be called ltc2978.

config SENSORS_MAX16064
	tristate "Maxim MAX16064"
	default n
	help
	  If you say yes here you get hardware monitoring support for Maxim
	  MAX16064.

	  This driver can also be built as a module. If so, the module will
	  be called max16064.

config SENSORS_MAX34440
	tristate "Maxim MAX34440/MAX34441"
	default n
	help
	  If you say yes here you get hardware monitoring support for Maxim
	  MAX34440 and MAX34441.

	  This driver can also be built as a module. If so, the module will
	  be called max34440.

config SENSORS_MAX8688
	tristate "Maxim MAX8688"
	default n
	help
	  If you say yes here you get hardware monitoring support for Maxim
	  MAX8688.

	  This driver can also be built as a module. If so, the module will
	  be called max8688.

config SENSORS_UCD9000
	tristate "TI UCD90120, UCD90124, UCD9090, UCD90910"
	default n
	help
	  If you say yes here you get hardware monitoring support for TI
	  UCD90120, UCD90124, UCD9090, UCD90910 Sequencer and System Health
	  Controllers.

	  This driver can also be built as a module. If so, the module will
	  be called ucd9000.

config SENSORS_UCD9200
	tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248"
	default n
	help
	  If you say yes here you get hardware monitoring support for TI
	  UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
	  Digital PWM System Controllers.

	  This driver can also be built as a module. If so, the module will
	  be called ucd9200.

config SENSORS_ZL6100
	tristate "Intersil ZL6100 and compatibles"
	default n
	help
	  If you say yes here you get hardware monitoring support for Intersil
	  ZL2004, ZL2005, ZL2006, ZL2008, ZL2105, ZL2106, ZL6100, and ZL6105
	  Digital DC/DC Controllers, as well as for Ericsson BMR450, BMR451,
	  BMR462, BMR463, and BMR464.

	  This driver can also be built as a module. If so, the module will
	  be called zl6100.

endif # PMBUS
Commit	Line	Data
9d2ecfb7 GR	1	#
	2	# PMBus chip drivers configuration
	3	#
	4
	5	menuconfig PMBUS
	6	tristate "PMBus support"
	7	depends on I2C && EXPERIMENTAL
	8	default n
	9	help
	10	Say yes here if you want to enable PMBus support.
	11
	12	This driver can also be built as a module. If so, the module will
	13	be called pmbus_core.
	14
	15	if PMBUS
	16
	17	config SENSORS_PMBUS
	18	tristate "Generic PMBus devices"
	19	default y
	20	help
	21	If you say yes here you get hardware monitoring support for generic
443830f6 GR	22	PMBus devices, including but not limited to ADP4000, BMR453, BMR454,
443830f6 GR	23	NCP4200, and NCP4208.
9d2ecfb7 GR	24
	25	This driver can also be built as a module. If so, the module will
	26	be called pmbus.
	27
	28	config SENSORS_ADM1275
5cf231a3	29	tristate "Analog Devices ADM1275 and compatibles"
9d2ecfb7 GR	30	default n
	31	help
	32	If you say yes here you get hardware monitoring support for Analog
5cf231a3 GR	33	Devices ADM1275 and ADM1276 Hot-Swap Controller and Digital Power
5cf231a3 GR	34	Monitor.
9d2ecfb7 GR	35
	36	This driver can also be built as a module. If so, the module will
	37	be called adm1275.
	38
03e9bd8d GR	39	config SENSORS_LM25066
	40	tristate "National Semiconductor LM25066 and compatibles"
	41	default n
	42	help
	43	If you say yes here you get hardware monitoring support for National
	44	Semiconductor LM25066, LM5064, and LM5066.
	45
	46	This driver can also be built as a module. If so, the module will
	47	be called lm25066.
	48
c3ff9a67	49	config SENSORS_LTC2978
ddfb41ca	50	tristate "Linear Technologies LTC2978 and LTC3880"
c3ff9a67 GR	51	default n
	52	help
	53	If you say yes here you get hardware monitoring support for Linear
ddfb41ca	54	Technology LTC2978 and LTC3880.
c3ff9a67 GR	55
	56	This driver can also be built as a module. If so, the module will
	57	be called ltc2978.
	58
9d2ecfb7 GR	59	config SENSORS_MAX16064
	60	tristate "Maxim MAX16064"
	61	default n
	62	help
	63	If you say yes here you get hardware monitoring support for Maxim
	64	MAX16064.
	65
	66	This driver can also be built as a module. If so, the module will
	67	be called max16064.
	68
	69	config SENSORS_MAX34440
	70	tristate "Maxim MAX34440/MAX34441"
	71	default n
	72	help
	73	If you say yes here you get hardware monitoring support for Maxim
	74	MAX34440 and MAX34441.
	75
	76	This driver can also be built as a module. If so, the module will
	77	be called max34440.
	78
	79	config SENSORS_MAX8688
	80	tristate "Maxim MAX8688"
	81	default n
	82	help
	83	If you say yes here you get hardware monitoring support for Maxim
	84	MAX8688.
	85
	86	This driver can also be built as a module. If so, the module will
	87	be called max8688.
	88
	89	config SENSORS_UCD9000
	90	tristate "TI UCD90120, UCD90124, UCD9090, UCD90910"
	91	default n
	92	help
	93	If you say yes here you get hardware monitoring support for TI
	94	UCD90120, UCD90124, UCD9090, UCD90910 Sequencer and System Health
	95	Controllers.
	96
	97	This driver can also be built as a module. If so, the module will
	98	be called ucd9000.
	99
	100	config SENSORS_UCD9200
	101	tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248"
	102	default n
	103	help
	104	If you say yes here you get hardware monitoring support for TI
	105	UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
	106	Digital PWM System Controllers.
	107
	108	This driver can also be built as a module. If so, the module will
	109	be called ucd9200.
	110
200855e5 GR	111	config SENSORS_ZL6100
	112	tristate "Intersil ZL6100 and compatibles"
	113	default n
	114	help
	115	If you say yes here you get hardware monitoring support for Intersil
bc581e6f	116	ZL2004, ZL2005, ZL2006, ZL2008, ZL2105, ZL2106, ZL6100, and ZL6105
443830f6 GR	117	Digital DC/DC Controllers, as well as for Ericsson BMR450, BMR451,
443830f6 GR	118	BMR462, BMR463, and BMR464.
200855e5 GR	119
	120	This driver can also be built as a module. If so, the module will
	121	be called zl6100.
	122
9d2ecfb7	123	endif # PMBUS