]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * w83l785ts.c - Part of lm_sensors, Linux kernel modules for hardware | |
3 | * monitoring | |
4 | * Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org> | |
5 | * | |
6 | * Inspired from the lm83 driver. The W83L785TS-S is a sensor chip made | |
7 | * by Winbond. It reports a single external temperature with a 1 deg | |
8 | * resolution and a 3 deg accuracy. Datasheet can be obtained from | |
9 | * Winbond's website at: | |
10 | * http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83L785TS-S.pdf | |
11 | * | |
12 | * Ported to Linux 2.6 by Wolfgang Ziegler <nuppla@gmx.at> and Jean Delvare | |
13 | * <khali@linux-fr.org>. | |
14 | * | |
15 | * Thanks to James Bolt <james@evilpenguin.com> for benchmarking the read | |
16 | * error handling mechanism. | |
17 | * | |
18 | * This program is free software; you can redistribute it and/or modify | |
19 | * it under the terms of the GNU General Public License as published by | |
20 | * the Free Software Foundation; either version 2 of the License, or | |
21 | * (at your option) any later version. | |
22 | * | |
23 | * This program is distributed in the hope that it will be useful, | |
24 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
25 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
26 | * GNU General Public License for more details. | |
27 | * | |
28 | * You should have received a copy of the GNU General Public License | |
29 | * along with this program; if not, write to the Free Software | |
30 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
31 | */ | |
32 | ||
1da177e4 LT |
33 | #include <linux/module.h> |
34 | #include <linux/delay.h> | |
35 | #include <linux/init.h> | |
36 | #include <linux/slab.h> | |
37 | #include <linux/jiffies.h> | |
38 | #include <linux/i2c.h> | |
943b0830 | 39 | #include <linux/hwmon.h> |
709439a2 | 40 | #include <linux/hwmon-sysfs.h> |
943b0830 | 41 | #include <linux/err.h> |
1da177e4 LT |
42 | |
43 | /* How many retries on register read error */ | |
44 | #define MAX_RETRIES 5 | |
45 | ||
46 | /* | |
47 | * Address to scan | |
48 | * Address is fully defined internally and cannot be changed. | |
49 | */ | |
50 | ||
51 | static unsigned short normal_i2c[] = { 0x2e, I2C_CLIENT_END }; | |
1da177e4 LT |
52 | |
53 | /* | |
54 | * Insmod parameters | |
55 | */ | |
56 | ||
f4b50261 | 57 | I2C_CLIENT_INSMOD_1(w83l785ts); |
1da177e4 LT |
58 | |
59 | /* | |
60 | * The W83L785TS-S registers | |
61 | * Manufacturer ID is 0x5CA3 for Winbond. | |
62 | */ | |
63 | ||
64 | #define W83L785TS_REG_MAN_ID1 0x4D | |
65 | #define W83L785TS_REG_MAN_ID2 0x4C | |
66 | #define W83L785TS_REG_CHIP_ID 0x4E | |
67 | #define W83L785TS_REG_CONFIG 0x40 | |
68 | #define W83L785TS_REG_TYPE 0x52 | |
69 | #define W83L785TS_REG_TEMP 0x27 | |
70 | #define W83L785TS_REG_TEMP_OVER 0x53 /* not sure about this one */ | |
71 | ||
72 | /* | |
73 | * Conversions | |
74 | * The W83L785TS-S uses signed 8-bit values. | |
75 | */ | |
76 | ||
cb929eae | 77 | #define TEMP_FROM_REG(val) ((val) * 1000) |
1da177e4 LT |
78 | |
79 | /* | |
80 | * Functions declaration | |
81 | */ | |
82 | ||
83 | static int w83l785ts_attach_adapter(struct i2c_adapter *adapter); | |
84 | static int w83l785ts_detect(struct i2c_adapter *adapter, int address, | |
85 | int kind); | |
86 | static int w83l785ts_detach_client(struct i2c_client *client); | |
87 | static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval); | |
88 | static struct w83l785ts_data *w83l785ts_update_device(struct device *dev); | |
89 | ||
90 | /* | |
91 | * Driver data (common to all clients) | |
92 | */ | |
93 | ||
94 | static struct i2c_driver w83l785ts_driver = { | |
95 | .owner = THIS_MODULE, | |
96 | .name = "w83l785ts", | |
97 | .id = I2C_DRIVERID_W83L785TS, | |
1da177e4 LT |
98 | .attach_adapter = w83l785ts_attach_adapter, |
99 | .detach_client = w83l785ts_detach_client, | |
100 | }; | |
101 | ||
102 | /* | |
103 | * Client data (each client gets its own) | |
104 | */ | |
105 | ||
106 | struct w83l785ts_data { | |
107 | struct i2c_client client; | |
943b0830 | 108 | struct class_device *class_dev; |
1da177e4 LT |
109 | struct semaphore update_lock; |
110 | char valid; /* zero until following fields are valid */ | |
111 | unsigned long last_updated; /* in jiffies */ | |
112 | ||
113 | /* registers values */ | |
cb929eae | 114 | s8 temp[2]; /* 0: input |
709439a2 | 115 | 1: critical limit */ |
1da177e4 LT |
116 | }; |
117 | ||
118 | /* | |
119 | * Sysfs stuff | |
120 | */ | |
121 | ||
709439a2 JD |
122 | static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, |
123 | char *buf) | |
1da177e4 | 124 | { |
709439a2 | 125 | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
1da177e4 | 126 | struct w83l785ts_data *data = w83l785ts_update_device(dev); |
709439a2 | 127 | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index])); |
1da177e4 LT |
128 | } |
129 | ||
709439a2 JD |
130 | static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); |
131 | static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, NULL, 1); | |
1da177e4 LT |
132 | |
133 | /* | |
134 | * Real code | |
135 | */ | |
136 | ||
137 | static int w83l785ts_attach_adapter(struct i2c_adapter *adapter) | |
138 | { | |
139 | if (!(adapter->class & I2C_CLASS_HWMON)) | |
140 | return 0; | |
2ed2dc3c | 141 | return i2c_probe(adapter, &addr_data, w83l785ts_detect); |
1da177e4 LT |
142 | } |
143 | ||
144 | /* | |
145 | * The following function does more than just detection. If detection | |
146 | * succeeds, it also registers the new chip. | |
147 | */ | |
148 | static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind) | |
149 | { | |
150 | struct i2c_client *new_client; | |
151 | struct w83l785ts_data *data; | |
152 | int err = 0; | |
153 | ||
154 | ||
155 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | |
156 | goto exit; | |
157 | ||
ba9c2e8d | 158 | if (!(data = kzalloc(sizeof(struct w83l785ts_data), GFP_KERNEL))) { |
1da177e4 LT |
159 | err = -ENOMEM; |
160 | goto exit; | |
161 | } | |
1da177e4 LT |
162 | |
163 | /* The common I2C client data is placed right before the | |
164 | * W83L785TS-specific data. */ | |
165 | new_client = &data->client; | |
166 | i2c_set_clientdata(new_client, data); | |
167 | new_client->addr = address; | |
168 | new_client->adapter = adapter; | |
169 | new_client->driver = &w83l785ts_driver; | |
170 | new_client->flags = 0; | |
171 | ||
172 | /* | |
173 | * Now we do the remaining detection. A negative kind means that | |
174 | * the driver was loaded with no force parameter (default), so we | |
175 | * must both detect and identify the chip (actually there is only | |
176 | * one possible kind of chip for now, W83L785TS-S). A zero kind means | |
177 | * that the driver was loaded with the force parameter, the detection | |
178 | * step shall be skipped. A positive kind means that the driver | |
179 | * was loaded with the force parameter and a given kind of chip is | |
180 | * requested, so both the detection and the identification steps | |
181 | * are skipped. | |
182 | */ | |
183 | if (kind < 0) { /* detection */ | |
184 | if (((w83l785ts_read_value(new_client, | |
185 | W83L785TS_REG_CONFIG, 0) & 0x80) != 0x00) | |
186 | || ((w83l785ts_read_value(new_client, | |
187 | W83L785TS_REG_TYPE, 0) & 0xFC) != 0x00)) { | |
188 | dev_dbg(&adapter->dev, | |
189 | "W83L785TS-S detection failed at 0x%02x.\n", | |
190 | address); | |
191 | goto exit_free; | |
192 | } | |
193 | } | |
194 | ||
195 | if (kind <= 0) { /* identification */ | |
196 | u16 man_id; | |
197 | u8 chip_id; | |
198 | ||
199 | man_id = (w83l785ts_read_value(new_client, | |
200 | W83L785TS_REG_MAN_ID1, 0) << 8) + | |
201 | w83l785ts_read_value(new_client, | |
202 | W83L785TS_REG_MAN_ID2, 0); | |
203 | chip_id = w83l785ts_read_value(new_client, | |
204 | W83L785TS_REG_CHIP_ID, 0); | |
205 | ||
206 | if (man_id == 0x5CA3) { /* Winbond */ | |
207 | if (chip_id == 0x70) { /* W83L785TS-S */ | |
208 | kind = w83l785ts; | |
209 | } | |
210 | } | |
211 | ||
212 | if (kind <= 0) { /* identification failed */ | |
213 | dev_info(&adapter->dev, | |
214 | "Unsupported chip (man_id=0x%04X, " | |
215 | "chip_id=0x%02X).\n", man_id, chip_id); | |
216 | goto exit_free; | |
217 | } | |
218 | } | |
219 | ||
220 | /* We can fill in the remaining client fields. */ | |
221 | strlcpy(new_client->name, "w83l785ts", I2C_NAME_SIZE); | |
222 | data->valid = 0; | |
223 | init_MUTEX(&data->update_lock); | |
224 | ||
225 | /* Default values in case the first read fails (unlikely). */ | |
709439a2 | 226 | data->temp[1] = data->temp[0] = 0; |
1da177e4 LT |
227 | |
228 | /* Tell the I2C layer a new client has arrived. */ | |
229 | if ((err = i2c_attach_client(new_client))) | |
230 | goto exit_free; | |
231 | ||
232 | /* | |
233 | * Initialize the W83L785TS chip | |
234 | * Nothing yet, assume it is already started. | |
235 | */ | |
236 | ||
237 | /* Register sysfs hooks */ | |
943b0830 MH |
238 | data->class_dev = hwmon_device_register(&new_client->dev); |
239 | if (IS_ERR(data->class_dev)) { | |
240 | err = PTR_ERR(data->class_dev); | |
241 | goto exit_detach; | |
242 | } | |
243 | ||
709439a2 JD |
244 | device_create_file(&new_client->dev, |
245 | &sensor_dev_attr_temp1_input.dev_attr); | |
246 | device_create_file(&new_client->dev, | |
247 | &sensor_dev_attr_temp1_max.dev_attr); | |
1da177e4 LT |
248 | |
249 | return 0; | |
250 | ||
943b0830 MH |
251 | exit_detach: |
252 | i2c_detach_client(new_client); | |
1da177e4 LT |
253 | exit_free: |
254 | kfree(data); | |
255 | exit: | |
256 | return err; | |
257 | } | |
258 | ||
259 | static int w83l785ts_detach_client(struct i2c_client *client) | |
260 | { | |
943b0830 | 261 | struct w83l785ts_data *data = i2c_get_clientdata(client); |
1da177e4 LT |
262 | int err; |
263 | ||
943b0830 MH |
264 | hwmon_device_unregister(data->class_dev); |
265 | ||
7bef5594 | 266 | if ((err = i2c_detach_client(client))) |
1da177e4 | 267 | return err; |
1da177e4 | 268 | |
943b0830 | 269 | kfree(data); |
1da177e4 LT |
270 | return 0; |
271 | } | |
272 | ||
273 | static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval) | |
274 | { | |
275 | int value, i; | |
276 | ||
277 | /* Frequent read errors have been reported on Asus boards, so we | |
278 | * retry on read errors. If it still fails (unlikely), return the | |
279 | * default value requested by the caller. */ | |
280 | for (i = 1; i <= MAX_RETRIES; i++) { | |
281 | value = i2c_smbus_read_byte_data(client, reg); | |
282 | if (value >= 0) { | |
283 | dev_dbg(&client->dev, "Read 0x%02x from register " | |
284 | "0x%02x.\n", value, reg); | |
285 | return value; | |
286 | } | |
287 | dev_dbg(&client->dev, "Read failed, will retry in %d.\n", i); | |
288 | msleep(i); | |
289 | } | |
290 | ||
291 | dev_err(&client->dev, "Couldn't read value from register 0x%02x. " | |
292 | "Please report.\n", reg); | |
293 | return defval; | |
294 | } | |
295 | ||
296 | static struct w83l785ts_data *w83l785ts_update_device(struct device *dev) | |
297 | { | |
298 | struct i2c_client *client = to_i2c_client(dev); | |
299 | struct w83l785ts_data *data = i2c_get_clientdata(client); | |
300 | ||
301 | down(&data->update_lock); | |
302 | ||
303 | if (!data->valid || time_after(jiffies, data->last_updated + HZ * 2)) { | |
304 | dev_dbg(&client->dev, "Updating w83l785ts data.\n"); | |
709439a2 JD |
305 | data->temp[0] = w83l785ts_read_value(client, |
306 | W83L785TS_REG_TEMP, data->temp[0]); | |
307 | data->temp[1] = w83l785ts_read_value(client, | |
308 | W83L785TS_REG_TEMP_OVER, data->temp[1]); | |
1da177e4 LT |
309 | |
310 | data->last_updated = jiffies; | |
311 | data->valid = 1; | |
312 | } | |
313 | ||
314 | up(&data->update_lock); | |
315 | ||
316 | return data; | |
317 | } | |
318 | ||
319 | static int __init sensors_w83l785ts_init(void) | |
320 | { | |
321 | return i2c_add_driver(&w83l785ts_driver); | |
322 | } | |
323 | ||
324 | static void __exit sensors_w83l785ts_exit(void) | |
325 | { | |
326 | i2c_del_driver(&w83l785ts_driver); | |
327 | } | |
328 | ||
329 | MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); | |
330 | MODULE_DESCRIPTION("W83L785TS-S driver"); | |
331 | MODULE_LICENSE("GPL"); | |
332 | ||
333 | module_init(sensors_w83l785ts_init); | |
334 | module_exit(sensors_w83l785ts_exit); |