]>
Commit | Line | Data |
---|---|---|
c3bc4cae BG |
1 | /* |
2 | max6875.c - driver for MAX6874/MAX6875 | |
3 | ||
4 | Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com> | |
5 | ||
6 | Based on i2c/chips/eeprom.c | |
7 | ||
bc769ff8 BG |
8 | The MAX6875 has a bank of registers and two banks of EEPROM. |
9 | Address ranges are defined as follows: | |
10 | * 0x0000 - 0x0046 = configuration registers | |
11 | * 0x8000 - 0x8046 = configuration EEPROM | |
12 | * 0x8100 - 0x82FF = user EEPROM | |
c3bc4cae | 13 | |
bc769ff8 | 14 | This driver makes the user EEPROM available for read. |
c3bc4cae | 15 | |
bc769ff8 | 16 | The registers & config EEPROM should be accessed via i2c-dev. |
c3bc4cae | 17 | |
bc769ff8 BG |
18 | The MAX6875 ignores the lowest address bit, so each chip responds to |
19 | two addresses - 0x50/0x51 and 0x52/0x53. | |
20 | ||
21 | Note that the MAX6875 uses i2c_smbus_write_byte_data() to set the read | |
22 | address, so this driver is destructive if loaded for the wrong EEPROM chip. | |
c3bc4cae BG |
23 | |
24 | This program is free software; you can redistribute it and/or modify | |
25 | it under the terms of the GNU General Public License as published by | |
26 | the Free Software Foundation; version 2 of the License. | |
27 | */ | |
28 | ||
c3bc4cae BG |
29 | #include <linux/kernel.h> |
30 | #include <linux/init.h> | |
31 | #include <linux/module.h> | |
32 | #include <linux/slab.h> | |
c3bc4cae | 33 | #include <linux/i2c.h> |
5c085d36 | 34 | #include <linux/mutex.h> |
c3bc4cae | 35 | |
bc769ff8 | 36 | /* Do not scan - the MAX6875 access method will write to some EEPROM chips */ |
2cdddeb8 | 37 | static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; |
c3bc4cae BG |
38 | |
39 | /* Insmod parameters */ | |
f4b50261 | 40 | I2C_CLIENT_INSMOD_1(max6875); |
c3bc4cae | 41 | |
c3bc4cae BG |
42 | /* The MAX6875 can only read/write 16 bytes at a time */ |
43 | #define SLICE_SIZE 16 | |
44 | #define SLICE_BITS 4 | |
45 | ||
c3bc4cae BG |
46 | /* USER EEPROM is at addresses 0x8100 - 0x82FF */ |
47 | #define USER_EEPROM_BASE 0x8100 | |
48 | #define USER_EEPROM_SIZE 0x0200 | |
49 | #define USER_EEPROM_SLICES 32 | |
50 | ||
51 | /* MAX6875 commands */ | |
bc769ff8 | 52 | #define MAX6875_CMD_BLK_READ 0x84 |
c3bc4cae BG |
53 | |
54 | /* Each client has this additional data */ | |
55 | struct max6875_data { | |
56 | struct i2c_client client; | |
5c085d36 | 57 | struct mutex update_lock; |
bc769ff8 BG |
58 | |
59 | u32 valid; | |
60 | u8 data[USER_EEPROM_SIZE]; | |
61 | unsigned long last_updated[USER_EEPROM_SLICES]; | |
c3bc4cae BG |
62 | }; |
63 | ||
64 | static int max6875_attach_adapter(struct i2c_adapter *adapter); | |
65 | static int max6875_detect(struct i2c_adapter *adapter, int address, int kind); | |
66 | static int max6875_detach_client(struct i2c_client *client); | |
67 | ||
68 | /* This is the driver that will be inserted */ | |
69 | static struct i2c_driver max6875_driver = { | |
a9718b0c | 70 | .driver = { |
a9718b0c LR |
71 | .name = "max6875", |
72 | }, | |
c3bc4cae BG |
73 | .attach_adapter = max6875_attach_adapter, |
74 | .detach_client = max6875_detach_client, | |
75 | }; | |
76 | ||
bc769ff8 | 77 | static void max6875_update_slice(struct i2c_client *client, int slice) |
c3bc4cae BG |
78 | { |
79 | struct max6875_data *data = i2c_get_clientdata(client); | |
bc769ff8 BG |
80 | int i, j, addr; |
81 | u8 *buf; | |
c3bc4cae | 82 | |
bc769ff8 BG |
83 | if (slice >= USER_EEPROM_SLICES) |
84 | return; | |
c3bc4cae | 85 | |
5c085d36 | 86 | mutex_lock(&data->update_lock); |
c3bc4cae | 87 | |
bc769ff8 BG |
88 | buf = &data->data[slice << SLICE_BITS]; |
89 | ||
90 | if (!(data->valid & (1 << slice)) || | |
91 | time_after(jiffies, data->last_updated[slice])) { | |
92 | ||
a8decc65 | 93 | dev_dbg(&client->dev, "Starting update of slice %u\n", slice); |
c3bc4cae | 94 | |
bc769ff8 | 95 | data->valid &= ~(1 << slice); |
c3bc4cae | 96 | |
bc769ff8 BG |
97 | addr = USER_EEPROM_BASE + (slice << SLICE_BITS); |
98 | ||
99 | /* select the eeprom address */ | |
100 | if (i2c_smbus_write_byte_data(client, addr >> 8, addr & 0xFF)) { | |
101 | dev_err(&client->dev, "address set failed\n"); | |
bc769ff8 | 102 | goto exit_up; |
c3bc4cae BG |
103 | } |
104 | ||
bc769ff8 BG |
105 | if (i2c_check_functionality(client->adapter, |
106 | I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { | |
107 | if (i2c_smbus_read_i2c_block_data(client, | |
108 | MAX6875_CMD_BLK_READ, | |
4b2643d7 | 109 | SLICE_SIZE, |
bc769ff8 | 110 | buf) != SLICE_SIZE) { |
bc769ff8 | 111 | goto exit_up; |
c3bc4cae | 112 | } |
c3bc4cae | 113 | } else { |
bc769ff8 | 114 | for (i = 0; i < SLICE_SIZE; i++) { |
c3bc4cae | 115 | j = i2c_smbus_read_byte(client); |
bc769ff8 | 116 | if (j < 0) { |
bc769ff8 | 117 | goto exit_up; |
c3bc4cae | 118 | } |
bc769ff8 | 119 | buf[i] = j; |
c3bc4cae BG |
120 | } |
121 | } | |
bc769ff8 BG |
122 | data->last_updated[slice] = jiffies; |
123 | data->valid |= (1 << slice); | |
c3bc4cae | 124 | } |
bc769ff8 | 125 | exit_up: |
5c085d36 | 126 | mutex_unlock(&data->update_lock); |
c3bc4cae BG |
127 | } |
128 | ||
91a69029 ZR |
129 | static ssize_t max6875_read(struct kobject *kobj, |
130 | struct bin_attribute *bin_attr, | |
131 | char *buf, loff_t off, size_t count) | |
c3bc4cae | 132 | { |
bc769ff8 | 133 | struct i2c_client *client = kobj_to_i2c_client(kobj); |
c3bc4cae | 134 | struct max6875_data *data = i2c_get_clientdata(client); |
bc769ff8 | 135 | int slice, max_slice; |
c3bc4cae | 136 | |
bc769ff8 | 137 | if (off > USER_EEPROM_SIZE) |
c3bc4cae | 138 | return 0; |
c3bc4cae | 139 | |
bc769ff8 BG |
140 | if (off + count > USER_EEPROM_SIZE) |
141 | count = USER_EEPROM_SIZE - off; | |
c3bc4cae | 142 | |
bc769ff8 BG |
143 | /* refresh slices which contain requested bytes */ |
144 | max_slice = (off + count - 1) >> SLICE_BITS; | |
145 | for (slice = (off >> SLICE_BITS); slice <= max_slice; slice++) | |
146 | max6875_update_slice(client, slice); | |
c3bc4cae | 147 | |
bc769ff8 | 148 | memcpy(buf, &data->data[off], count); |
c3bc4cae | 149 | |
bc769ff8 | 150 | return count; |
c3bc4cae BG |
151 | } |
152 | ||
153 | static struct bin_attribute user_eeprom_attr = { | |
154 | .attr = { | |
bc769ff8 BG |
155 | .name = "eeprom", |
156 | .mode = S_IRUGO, | |
c3bc4cae | 157 | }, |
bc769ff8 BG |
158 | .size = USER_EEPROM_SIZE, |
159 | .read = max6875_read, | |
c3bc4cae BG |
160 | }; |
161 | ||
162 | static int max6875_attach_adapter(struct i2c_adapter *adapter) | |
163 | { | |
2ed2dc3c | 164 | return i2c_probe(adapter, &addr_data, max6875_detect); |
c3bc4cae BG |
165 | } |
166 | ||
2ed2dc3c | 167 | /* This function is called by i2c_probe */ |
c3bc4cae BG |
168 | static int max6875_detect(struct i2c_adapter *adapter, int address, int kind) |
169 | { | |
bc769ff8 BG |
170 | struct i2c_client *real_client; |
171 | struct i2c_client *fake_client; | |
c3bc4cae | 172 | struct max6875_data *data; |
f741f673 | 173 | int err; |
c3bc4cae | 174 | |
17f990c8 | 175 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
bc769ff8 BG |
176 | | I2C_FUNC_SMBUS_READ_BYTE)) |
177 | return 0; | |
178 | ||
179 | /* Only check even addresses */ | |
180 | if (address & 1) | |
181 | return 0; | |
182 | ||
5263ebb5 | 183 | if (!(data = kzalloc(sizeof(struct max6875_data), GFP_KERNEL))) |
bc769ff8 | 184 | return -ENOMEM; |
c3bc4cae | 185 | |
bc769ff8 | 186 | /* A fake client is created on the odd address */ |
5263ebb5 | 187 | if (!(fake_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) { |
bc769ff8 BG |
188 | err = -ENOMEM; |
189 | goto exit_kfree1; | |
190 | } | |
bc769ff8 BG |
191 | |
192 | /* Init real i2c_client */ | |
193 | real_client = &data->client; | |
194 | i2c_set_clientdata(real_client, data); | |
195 | real_client->addr = address; | |
196 | real_client->adapter = adapter; | |
197 | real_client->driver = &max6875_driver; | |
bc769ff8 | 198 | strlcpy(real_client->name, "max6875", I2C_NAME_SIZE); |
5c085d36 | 199 | mutex_init(&data->update_lock); |
c3bc4cae | 200 | |
bc769ff8 | 201 | /* Init fake client data */ |
7d9db67f | 202 | i2c_set_clientdata(fake_client, NULL); |
bc769ff8 BG |
203 | fake_client->addr = address | 1; |
204 | fake_client->adapter = adapter; | |
205 | fake_client->driver = &max6875_driver; | |
17f990c8 | 206 | strlcpy(fake_client->name, "max6875 subclient", I2C_NAME_SIZE); |
bc769ff8 | 207 | |
bc769ff8 BG |
208 | if ((err = i2c_attach_client(real_client)) != 0) |
209 | goto exit_kfree2; | |
210 | ||
211 | if ((err = i2c_attach_client(fake_client)) != 0) | |
7d9db67f | 212 | goto exit_detach1; |
bc769ff8 | 213 | |
7d9db67f JD |
214 | err = sysfs_create_bin_file(&real_client->dev.kobj, &user_eeprom_attr); |
215 | if (err) | |
216 | goto exit_detach2; | |
c3bc4cae BG |
217 | |
218 | return 0; | |
219 | ||
7d9db67f JD |
220 | exit_detach2: |
221 | i2c_detach_client(fake_client); | |
222 | exit_detach1: | |
bc769ff8 BG |
223 | i2c_detach_client(real_client); |
224 | exit_kfree2: | |
225 | kfree(fake_client); | |
226 | exit_kfree1: | |
c3bc4cae | 227 | kfree(data); |
c3bc4cae BG |
228 | return err; |
229 | } | |
230 | ||
7d9db67f | 231 | /* Will be called for both the real client and the fake client */ |
c3bc4cae BG |
232 | static int max6875_detach_client(struct i2c_client *client) |
233 | { | |
234 | int err; | |
7d9db67f JD |
235 | struct max6875_data *data = i2c_get_clientdata(client); |
236 | ||
237 | /* data is NULL for the fake client */ | |
238 | if (data) | |
239 | sysfs_remove_bin_file(&client->dev.kobj, &user_eeprom_attr); | |
c3bc4cae BG |
240 | |
241 | err = i2c_detach_client(client); | |
7bef5594 | 242 | if (err) |
c3bc4cae | 243 | return err; |
7d9db67f JD |
244 | |
245 | if (data) /* real client */ | |
246 | kfree(data); | |
247 | else /* fake client */ | |
248 | kfree(client); | |
c3bc4cae BG |
249 | return 0; |
250 | } | |
251 | ||
252 | static int __init max6875_init(void) | |
253 | { | |
254 | return i2c_add_driver(&max6875_driver); | |
255 | } | |
256 | ||
257 | static void __exit max6875_exit(void) | |
258 | { | |
259 | i2c_del_driver(&max6875_driver); | |
260 | } | |
261 | ||
262 | ||
263 | MODULE_AUTHOR("Ben Gardner <bgardner@wabtec.com>"); | |
264 | MODULE_DESCRIPTION("MAX6875 driver"); | |
265 | MODULE_LICENSE("GPL"); | |
266 | ||
267 | module_init(max6875_init); | |
268 | module_exit(max6875_exit); |