[mirror_ubuntu-eoan-kernel.git] / drivers / ide / legacy / ide-cs.c

/*======================================================================

    A driver for PCMCIA IDE/ATA disk cards

    ide-cs.c 1.3 2002/10/26 05:45:31

    The contents of this file are subject to the Mozilla Public
    License Version 1.1 (the "License"); you may not use this file
    except in compliance with the License. You may obtain a copy of
    the License at http://www.mozilla.org/MPL/

    Software distributed under the License is distributed on an "AS
    IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
    implied. See the License for the specific language governing
    rights and limitations under the License.

    The initial developer of the original code is David A. Hinds
    <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
    are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.

    Alternatively, the contents of this file may be used under the
    terms of the GNU General Public License version 2 (the "GPL"), in
    which case the provisions of the GPL are applicable instead of the
    above.  If you wish to allow the use of your version of this file
    only under the terms of the GPL and not to allow others to use
    your version of this file under the MPL, indicate your decision
    by deleting the provisions above and replace them with the notice
    and other provisions required by the GPL.  If you do not delete
    the provisions above, a recipient may use your version of this
    file under either the MPL or the GPL.
    
======================================================================*/

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/ioport.h>
#include <linux/ide.h>
#include <linux/hdreg.h>
#include <linux/major.h>
#include <linux/delay.h>
#include <asm/io.h>
#include <asm/system.h>

#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ciscode.h>

/*====================================================================*/

/* Module parameters */

MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
MODULE_DESCRIPTION("PCMCIA ATA/IDE card driver");
MODULE_LICENSE("Dual MPL/GPL");

#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)

#ifdef PCMCIA_DEBUG
INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
static char *version =
"ide-cs.c 1.3 2002/10/26 05:45:31 (David Hinds)";
#else
#define DEBUG(n, args...)
#endif

/*====================================================================*/

static const char ide_major[] = {
    IDE0_MAJOR, IDE1_MAJOR, IDE2_MAJOR, IDE3_MAJOR,
    IDE4_MAJOR, IDE5_MAJOR
};

typedef struct ide_info_t {
	struct pcmcia_device	*p_dev;
    int		ndev;
    dev_node_t	node;
    int		hd;
} ide_info_t;

static void ide_release(dev_link_t *);
static void ide_config(dev_link_t *);

static void ide_detach(struct pcmcia_device *p_dev);


/*======================================================================

    ide_attach() creates an "instance" of the driver, allocating
    local data structures for one device.  The device is registered
    with Card Services.

======================================================================*/

static int ide_attach(struct pcmcia_device *p_dev)
{
    ide_info_t *info;
    dev_link_t *link = dev_to_instance(p_dev);

    DEBUG(0, "ide_attach()\n");

    /* Create new ide device */
    info = kzalloc(sizeof(*info), GFP_KERNEL);
    if (!info)
	return -ENOMEM;

    info->p_dev = p_dev;
    link->priv = info;

    link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
    link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
    link->io.IOAddrLines = 3;
    link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
    link->conf.Attributes = CONF_ENABLE_IRQ;
    link->conf.IntType = INT_MEMORY_AND_IO;

    link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
    ide_config(link);

    return 0;
} /* ide_attach */

/*======================================================================

    This deletes a driver "instance".  The device is de-registered
    with Card Services.  If it has been released, all local data
    structures are freed.  Otherwise, the structures will be freed
    when the device is released.

======================================================================*/

static void ide_detach(struct pcmcia_device *p_dev)
{
    dev_link_t *link = dev_to_instance(p_dev);

    DEBUG(0, "ide_detach(0x%p)\n", link);

    if (link->state & DEV_CONFIG)
	ide_release(link);

    kfree(link->priv);
} /* ide_detach */

static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq, struct pcmcia_device *handle)
{
    hw_regs_t hw;
    memset(&hw, 0, sizeof(hw));
    ide_init_hwif_ports(&hw, io, ctl, NULL);
    hw.irq = irq;
    hw.chipset = ide_pci;
    hw.dev = &handle->dev;
    return ide_register_hw_with_fixup(&hw, NULL, ide_undecoded_slave);
}

/*======================================================================

    ide_config() is scheduled to run after a CARD_INSERTION event
    is received, to configure the PCMCIA socket, and to make the
    ide device available to the system.

======================================================================*/

#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)

static void ide_config(dev_link_t *link)
{
    client_handle_t handle = link->handle;
    ide_info_t *info = link->priv;
    tuple_t tuple;
    struct {
	u_short		buf[128];
	cisparse_t	parse;
	config_info_t	conf;
	cistpl_cftable_entry_t dflt;
    } *stk = NULL;
    cistpl_cftable_entry_t *cfg;
    int i, pass, last_ret = 0, last_fn = 0, hd, is_kme = 0;
    unsigned long io_base, ctl_base;

    DEBUG(0, "ide_config(0x%p)\n", link);

    stk = kzalloc(sizeof(*stk), GFP_KERNEL);
    if (!stk) goto err_mem;
    cfg = &stk->parse.cftable_entry;

    tuple.TupleData = (cisdata_t *)&stk->buf;
    tuple.TupleOffset = 0;
    tuple.TupleDataMax = 255;
    tuple.Attributes = 0;
    tuple.DesiredTuple = CISTPL_CONFIG;
    CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
    CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
    CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &stk->parse));
    link->conf.ConfigBase = stk->parse.config.base;
    link->conf.Present = stk->parse.config.rmask[0];

    tuple.DesiredTuple = CISTPL_MANFID;
    if (!pcmcia_get_first_tuple(handle, &tuple) &&
	!pcmcia_get_tuple_data(handle, &tuple) &&
	!pcmcia_parse_tuple(handle, &tuple, &stk->parse))
	is_kme = ((stk->parse.manfid.manf == MANFID_KME) &&
		  ((stk->parse.manfid.card == PRODID_KME_KXLC005_A) ||
		   (stk->parse.manfid.card == PRODID_KME_KXLC005_B)));

    /* Configure card */
    link->state |= DEV_CONFIG;

    /* Not sure if this is right... look up the current Vcc */
    CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &stk->conf));

    pass = io_base = ctl_base = 0;
    tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
    tuple.Attributes = 0;
    CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
    while (1) {
    	if (pcmcia_get_tuple_data(handle, &tuple) != 0) goto next_entry;
	if (pcmcia_parse_tuple(handle, &tuple, &stk->parse) != 0) goto next_entry;

	/* Check for matching Vcc, unless we're desperate */
	if (!pass) {
	    if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
		if (stk->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
		    goto next_entry;
	    } else if (stk->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
		if (stk->conf.Vcc != stk->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000)
		    goto next_entry;
	    }
	}

	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
	    link->conf.Vpp =
		cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
	else if (stk->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
	    link->conf.Vpp =
		stk->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;

	if ((cfg->io.nwin > 0) || (stk->dflt.io.nwin > 0)) {
	    cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &stk->dflt.io;
	    link->conf.ConfigIndex = cfg->index;
	    link->io.BasePort1 = io->win[0].base;
	    link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
	    if (!(io->flags & CISTPL_IO_16BIT))
		link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
	    if (io->nwin == 2) {
		link->io.NumPorts1 = 8;
		link->io.BasePort2 = io->win[1].base;
		link->io.NumPorts2 = (is_kme) ? 2 : 1;
		if (pcmcia_request_io(link->handle, &link->io) != 0)
			goto next_entry;
		io_base = link->io.BasePort1;
		ctl_base = link->io.BasePort2;
	    } else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
		link->io.NumPorts1 = io->win[0].len;
		link->io.NumPorts2 = 0;
		if (pcmcia_request_io(link->handle, &link->io) != 0)
			goto next_entry;
		io_base = link->io.BasePort1;
		ctl_base = link->io.BasePort1 + 0x0e;
	    } else goto next_entry;
	    /* If we've got this far, we're done */
	    break;
	}

    next_entry:
	if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
	    memcpy(&stk->dflt, cfg, sizeof(stk->dflt));
	if (pass) {
	    CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(handle, &tuple));
	} else if (pcmcia_get_next_tuple(handle, &tuple) != 0) {
	    CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
	    memset(&stk->dflt, 0, sizeof(stk->dflt));
	    pass++;
	}
    }

    CS_CHECK(RequestIRQ, pcmcia_request_irq(handle, &link->irq));
    CS_CHECK(RequestConfiguration, pcmcia_request_configuration(handle, &link->conf));

    /* disable drive interrupts during IDE probe */
    outb(0x02, ctl_base);

    /* special setup for KXLC005 card */
    if (is_kme)
	outb(0x81, ctl_base+1);

    /* retry registration in case device is still spinning up */
    for (hd = -1, i = 0; i < 10; i++) {
	hd = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, handle);
	if (hd >= 0) break;
	if (link->io.NumPorts1 == 0x20) {
	    outb(0x02, ctl_base + 0x10);
	    hd = idecs_register(io_base + 0x10, ctl_base + 0x10,
				link->irq.AssignedIRQ, handle);
	    if (hd >= 0) {
		io_base += 0x10;
		ctl_base += 0x10;
		break;
	    }
	}
	msleep(100);
    }

    if (hd < 0) {
	printk(KERN_NOTICE "ide-cs: ide_register() at 0x%3lx & 0x%3lx"
	       ", irq %u failed\n", io_base, ctl_base,
	       link->irq.AssignedIRQ);
	goto failed;
    }

    info->ndev = 1;
    sprintf(info->node.dev_name, "hd%c", 'a' + (hd * 2));
    info->node.major = ide_major[hd];
    info->node.minor = 0;
    info->hd = hd;
    link->dev_node = &info->node;
    printk(KERN_INFO "ide-cs: %s: Vpp = %d.%d\n",
	   info->node.dev_name, link->conf.Vpp / 10, link->conf.Vpp % 10);

    link->state &= ~DEV_CONFIG_PENDING;
    kfree(stk);
    return;

err_mem:
    printk(KERN_NOTICE "ide-cs: ide_config failed memory allocation\n");
    goto failed;

cs_failed:
    cs_error(link->handle, last_fn, last_ret);
failed:
    kfree(stk);
    ide_release(link);
    link->state &= ~DEV_CONFIG_PENDING;
} /* ide_config */

/*======================================================================

    After a card is removed, ide_release() will unregister the net
    device, and release the PCMCIA configuration.  If the device is
    still open, this will be postponed until it is closed.
    
======================================================================*/

void ide_release(dev_link_t *link)
{
    ide_info_t *info = link->priv;
    
    DEBUG(0, "ide_release(0x%p)\n", link);

    if (info->ndev) {
	/* FIXME: if this fails we need to queue the cleanup somehow
	   -- need to investigate the required PCMCIA magic */
	ide_unregister(info->hd);
    }
    info->ndev = 0;

    pcmcia_disable_device(link->handle);
} /* ide_release */


/*======================================================================

    The card status event handler.  Mostly, this schedules other
    stuff to run after an event is received.  A CARD_REMOVAL event
    also sets some flags to discourage the ide drivers from
    talking to the ports.
    
======================================================================*/

static struct pcmcia_device_id ide_ids[] = {
	PCMCIA_DEVICE_FUNC_ID(4),
	PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000),	/* Hitachi */
	PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
	PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401),
	PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000),	/* Toshiba */
	PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
	PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000),	/* Samsung */
 	PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000),	/* Hitachi */
	PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001),
	PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200),	/* Lexar */
	PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0),
	PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74),
	PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
	PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
	PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
	PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
	PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
	PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
	PCMCIA_DEVICE_PROD_ID12("EXP", "CD+GAME", 0x6f58c983, 0x63c13aaf),
	PCMCIA_DEVICE_PROD_ID12("EXP   ", "CD-ROM", 0x0a5c52fd, 0x66536591),
	PCMCIA_DEVICE_PROD_ID12("EXP   ", "PnPIDE", 0x0a5c52fd, 0x0c694728),
	PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
	PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),
	PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
	PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
	PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2      ", 0x547e66dc, 0x8671043b),
	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
	PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2      ", 0xe37be2b5, 0x8671043b),
	PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728),
	PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1),
	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
	PCMCIA_DEVICE_PROD_ID1("TRANSCEND    512M   ", 0xd0909443),
	PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
	PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
	PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
	PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
	PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, ide_ids);

static struct pcmcia_driver ide_cs_driver = {
	.owner		= THIS_MODULE,
	.drv		= {
		.name	= "ide-cs",
	},
	.probe		= ide_attach,
	.remove		= ide_detach,
	.id_table       = ide_ids,
};

static int __init init_ide_cs(void)
{
	return pcmcia_register_driver(&ide_cs_driver);
}

static void __exit exit_ide_cs(void)
{
	pcmcia_unregister_driver(&ide_cs_driver);
}

late_initcall(init_ide_cs);
module_exit(exit_ide_cs);
Commit	Line	Data
1da177e4 LT	1	/*======================================================================
	2
	3	A driver for PCMCIA IDE/ATA disk cards
	4
	5	ide-cs.c 1.3 2002/10/26 05:45:31
	6
	7	The contents of this file are subject to the Mozilla Public
	8	License Version 1.1 (the "License"); you may not use this file
	9	except in compliance with the License. You may obtain a copy of
	10	the License at http://www.mozilla.org/MPL/
	11
	12	Software distributed under the License is distributed on an "AS
	13	IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
	14	implied. See the License for the specific language governing
	15	rights and limitations under the License.
	16
	17	The initial developer of the original code is David A. Hinds
	18	<dahinds@users.sourceforge.net>. Portions created by David A. Hinds
	19	are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
	20
	21	Alternatively, the contents of this file may be used under the
	22	terms of the GNU General Public License version 2 (the "GPL"), in
	23	which case the provisions of the GPL are applicable instead of the
	24	above. If you wish to allow the use of your version of this file
	25	only under the terms of the GPL and not to allow others to use
	26	your version of this file under the MPL, indicate your decision
	27	by deleting the provisions above and replace them with the notice
	28	and other provisions required by the GPL. If you do not delete
	29	the provisions above, a recipient may use your version of this
	30	file under either the MPL or the GPL.
	31
	32	======================================================================*/
	33
	34	#include <linux/module.h>
	35	#include <linux/kernel.h>
	36	#include <linux/init.h>
	37	#include <linux/sched.h>
	38	#include <linux/ptrace.h>
	39	#include <linux/slab.h>
	40	#include <linux/string.h>
	41	#include <linux/timer.h>
	42	#include <linux/ioport.h>
	43	#include <linux/ide.h>
	44	#include <linux/hdreg.h>
	45	#include <linux/major.h>
2aad5f03	46	#include <linux/delay.h>
1da177e4 LT	47	#include <asm/io.h>
	48	#include <asm/system.h>
	49
1da177e4 LT	50	#include <pcmcia/cs_types.h>
	51	#include <pcmcia/cs.h>
	52	#include <pcmcia/cistpl.h>
	53	#include <pcmcia/ds.h>
	54	#include <pcmcia/cisreg.h>
	55	#include <pcmcia/ciscode.h>
	56
	57	/====================================================================/
	58
	59	/* Module parameters */
	60
	61	MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
	62	MODULE_DESCRIPTION("PCMCIA ATA/IDE card driver");
	63	MODULE_LICENSE("Dual MPL/GPL");
	64
	65	#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
	66
	67	#ifdef PCMCIA_DEBUG
	68	INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
	69	#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
	70	static char *version =
	71	"ide-cs.c 1.3 2002/10/26 05:45:31 (David Hinds)";
	72	#else
	73	#define DEBUG(n, args...)
	74	#endif
	75
	76	/====================================================================/
	77
	78	static const char ide_major[] = {
	79	IDE0_MAJOR, IDE1_MAJOR, IDE2_MAJOR, IDE3_MAJOR,
	80	IDE4_MAJOR, IDE5_MAJOR
	81	};
	82
	83	typedef struct ide_info_t {
fd238232	84	struct pcmcia_device *p_dev;
1da177e4 LT	85	int ndev;
	86	dev_node_t node;
	87	int hd;
	88	} ide_info_t;
	89
	90	static void ide_release(dev_link_t *);
f8cfa618	91	static void ide_config(dev_link_t *);
1da177e4	92
cc3b4866	93	static void ide_detach(struct pcmcia_device *p_dev);
1da177e4	94
b4635811 DB	95
b4635811 DB	96
1da177e4 LT	97
	98	/*======================================================================
	99
	100	ide_attach() creates an "instance" of the driver, allocating
	101	local data structures for one device. The device is registered
	102	with Card Services.
	103
	104	======================================================================*/
	105
f8cfa618	106	static int ide_attach(struct pcmcia_device *p_dev)
1da177e4 LT	107	{
1da177e4 LT	108	ide_info_t *info;
fd238232	109	dev_link_t *link = dev_to_instance(p_dev);
f8cfa618	110
1da177e4 LT	111	DEBUG(0, "ide_attach()\n");
	112
	113	/* Create new ide device */
f5e3c2fa	114	info = kzalloc(sizeof(*info), GFP_KERNEL);
f8cfa618 DB	115	if (!info)
f8cfa618 DB	116	return -ENOMEM;
fd238232 DB	117
	118	info->p_dev = p_dev;
	119	link->priv = info;
1da177e4 LT	120
	121	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
	122	link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
	123	link->io.IOAddrLines = 3;
	124	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
	125	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
	126	link->conf.Attributes = CONF_ENABLE_IRQ;
1da177e4	127	link->conf.IntType = INT_MEMORY_AND_IO;
f8cfa618	128
f8cfa618 DB	129	link->state \|= DEV_PRESENT \| DEV_CONFIG_PENDING;
	130	ide_config(link);
	131
	132	return 0;
1da177e4 LT	133	} /* ide_attach */
	134
	135	/*======================================================================
	136
	137	This deletes a driver "instance". The device is de-registered
	138	with Card Services. If it has been released, all local data
	139	structures are freed. Otherwise, the structures will be freed
	140	when the device is released.
	141
	142	======================================================================*/
	143
cc3b4866	144	static void ide_detach(struct pcmcia_device *p_dev)
1da177e4	145	{
cc3b4866	146	dev_link_t *link = dev_to_instance(p_dev);
1da177e4 LT	147
1da177e4 LT	148	DEBUG(0, "ide_detach(0x%p)\n", link);
1da177e4 LT	149
	150	if (link->state & DEV_CONFIG)
	151	ide_release(link);
b4635811	152
1da177e4	153	kfree(link->priv);
1da177e4 LT	154	} /* ide_detach */
1da177e4 LT	155
4349d5cd	156	static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq, struct pcmcia_device *handle)
1da177e4 LT	157	{
	158	hw_regs_t hw;
	159	memset(&hw, 0, sizeof(hw));
	160	ide_init_hwif_ports(&hw, io, ctl, NULL);
	161	hw.irq = irq;
	162	hw.chipset = ide_pci;
4349d5cd	163	hw.dev = &handle->dev;
1da177e4 LT	164	return ide_register_hw_with_fixup(&hw, NULL, ide_undecoded_slave);
	165	}
	166
	167	/*======================================================================
	168
	169	ide_config() is scheduled to run after a CARD_INSERTION event
	170	is received, to configure the PCMCIA socket, and to make the
	171	ide device available to the system.
	172
	173	======================================================================*/
	174
	175	#define CS_CHECK(fn, ret) \
	176	do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
	177
	178	static void ide_config(dev_link_t *link)
	179	{
	180	client_handle_t handle = link->handle;
	181	ide_info_t *info = link->priv;
	182	tuple_t tuple;
	183	struct {
	184	u_short buf[128];
	185	cisparse_t parse;
	186	config_info_t conf;
	187	cistpl_cftable_entry_t dflt;
	188	} *stk = NULL;
	189	cistpl_cftable_entry_t *cfg;
	190	int i, pass, last_ret = 0, last_fn = 0, hd, is_kme = 0;
	191	unsigned long io_base, ctl_base;
	192
	193	DEBUG(0, "ide_config(0x%p)\n", link);
	194
f5e3c2fa	195	stk = kzalloc(sizeof(*stk), GFP_KERNEL);
1da177e4	196	if (!stk) goto err_mem;
1da177e4 LT	197	cfg = &stk->parse.cftable_entry;
	198
	199	tuple.TupleData = (cisdata_t *)&stk->buf;
	200	tuple.TupleOffset = 0;
	201	tuple.TupleDataMax = 255;
	202	tuple.Attributes = 0;
	203	tuple.DesiredTuple = CISTPL_CONFIG;
	204	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
	205	CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
	206	CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &stk->parse));
	207	link->conf.ConfigBase = stk->parse.config.base;
	208	link->conf.Present = stk->parse.config.rmask[0];
	209
	210	tuple.DesiredTuple = CISTPL_MANFID;
	211	if (!pcmcia_get_first_tuple(handle, &tuple) &&
	212	!pcmcia_get_tuple_data(handle, &tuple) &&
	213	!pcmcia_parse_tuple(handle, &tuple, &stk->parse))
	214	is_kme = ((stk->parse.manfid.manf == MANFID_KME) &&
	215	((stk->parse.manfid.card == PRODID_KME_KXLC005_A) \|\|
	216	(stk->parse.manfid.card == PRODID_KME_KXLC005_B)));
	217
	218	/* Configure card */
	219	link->state \|= DEV_CONFIG;
	220
	221	/* Not sure if this is right... look up the current Vcc */
	222	CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &stk->conf));
1da177e4 LT	223
	224	pass = io_base = ctl_base = 0;
	225	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
	226	tuple.Attributes = 0;
	227	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
	228	while (1) {
	229	if (pcmcia_get_tuple_data(handle, &tuple) != 0) goto next_entry;
	230	if (pcmcia_parse_tuple(handle, &tuple, &stk->parse) != 0) goto next_entry;
	231
	232	/* Check for matching Vcc, unless we're desperate */
	233	if (!pass) {
	234	if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
	235	if (stk->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
	236	goto next_entry;
	237	} else if (stk->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
	238	if (stk->conf.Vcc != stk->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000)
	239	goto next_entry;
	240	}
	241	}
	242
	243	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
70294b46	244	link->conf.Vpp =
1da177e4 LT	245	cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
1da177e4 LT	246	else if (stk->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
70294b46	247	link->conf.Vpp =
1da177e4 LT	248	stk->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
	249
	250	if ((cfg->io.nwin > 0) \|\| (stk->dflt.io.nwin > 0)) {
	251	cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &stk->dflt.io;
	252	link->conf.ConfigIndex = cfg->index;
	253	link->io.BasePort1 = io->win[0].base;
	254	link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
	255	if (!(io->flags & CISTPL_IO_16BIT))
	256	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
	257	if (io->nwin == 2) {
	258	link->io.NumPorts1 = 8;
	259	link->io.BasePort2 = io->win[1].base;
	260	link->io.NumPorts2 = (is_kme) ? 2 : 1;
	261	if (pcmcia_request_io(link->handle, &link->io) != 0)
	262	goto next_entry;
	263	io_base = link->io.BasePort1;
	264	ctl_base = link->io.BasePort2;
	265	} else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
	266	link->io.NumPorts1 = io->win[0].len;
	267	link->io.NumPorts2 = 0;
	268	if (pcmcia_request_io(link->handle, &link->io) != 0)
	269	goto next_entry;
	270	io_base = link->io.BasePort1;
	271	ctl_base = link->io.BasePort1 + 0x0e;
	272	} else goto next_entry;
	273	/* If we've got this far, we're done */
	274	break;
	275	}
	276
	277	next_entry:
	278	if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
	279	memcpy(&stk->dflt, cfg, sizeof(stk->dflt));
	280	if (pass) {
	281	CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(handle, &tuple));
	282	} else if (pcmcia_get_next_tuple(handle, &tuple) != 0) {
	283	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
	284	memset(&stk->dflt, 0, sizeof(stk->dflt));
	285	pass++;
	286	}
	287	}
	288
	289	CS_CHECK(RequestIRQ, pcmcia_request_irq(handle, &link->irq));
	290	CS_CHECK(RequestConfiguration, pcmcia_request_configuration(handle, &link->conf));
	291
	292	/* disable drive interrupts during IDE probe */
	293	outb(0x02, ctl_base);
	294
	295	/* special setup for KXLC005 card */
	296	if (is_kme)
	297	outb(0x81, ctl_base+1);
	298
	299	/* retry registration in case device is still spinning up */
	300	for (hd = -1, i = 0; i < 10; i++) {
4349d5cd	301	hd = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, handle);
1da177e4 LT	302	if (hd >= 0) break;
	303	if (link->io.NumPorts1 == 0x20) {
	304	outb(0x02, ctl_base + 0x10);
	305	hd = idecs_register(io_base + 0x10, ctl_base + 0x10,
4349d5cd	306	link->irq.AssignedIRQ, handle);
1da177e4 LT	307	if (hd >= 0) {
	308	io_base += 0x10;
	309	ctl_base += 0x10;
	310	break;
	311	}
	312	}
2aad5f03	313	msleep(100);
1da177e4 LT	314	}
	315
	316	if (hd < 0) {
	317	printk(KERN_NOTICE "ide-cs: ide_register() at 0x%3lx & 0x%3lx"
	318	", irq %u failed\n", io_base, ctl_base,
	319	link->irq.AssignedIRQ);
	320	goto failed;
	321	}
	322
	323	info->ndev = 1;
	324	sprintf(info->node.dev_name, "hd%c", 'a' + (hd * 2));
	325	info->node.major = ide_major[hd];
	326	info->node.minor = 0;
	327	info->hd = hd;
fd238232	328	link->dev_node = &info->node;
70294b46 DB	329	printk(KERN_INFO "ide-cs: %s: Vpp = %d.%d\n",
70294b46 DB	330	info->node.dev_name, link->conf.Vpp / 10, link->conf.Vpp % 10);
1da177e4 LT	331
	332	link->state &= ~DEV_CONFIG_PENDING;
	333	kfree(stk);
	334	return;
	335
	336	err_mem:
	337	printk(KERN_NOTICE "ide-cs: ide_config failed memory allocation\n");
	338	goto failed;
	339
	340	cs_failed:
	341	cs_error(link->handle, last_fn, last_ret);
	342	failed:
	343	kfree(stk);
	344	ide_release(link);
	345	link->state &= ~DEV_CONFIG_PENDING;
	346	} /* ide_config */
	347
	348	/*======================================================================
	349
	350	After a card is removed, ide_release() will unregister the net
	351	device, and release the PCMCIA configuration. If the device is
	352	still open, this will be postponed until it is closed.
	353
	354	======================================================================*/
	355
	356	void ide_release(dev_link_t *link)
	357	{
	358	ide_info_t *info = link->priv;
	359
	360	DEBUG(0, "ide_release(0x%p)\n", link);
	361
	362	if (info->ndev) {
	363	/* FIXME: if this fails we need to queue the cleanup somehow
	364	-- need to investigate the required PCMCIA magic */
	365	ide_unregister(info->hd);
	366	}
	367	info->ndev = 0;
1da177e4	368
5f2a71fc	369	pcmcia_disable_device(link->handle);
1da177e4 LT	370	} /* ide_release */
1da177e4 LT	371
98e4c28b	372
1da177e4 LT	373	/*======================================================================
	374
	375	The card status event handler. Mostly, this schedules other
	376	stuff to run after an event is received. A CARD_REMOVAL event
	377	also sets some flags to discourage the ide drivers from
	378	talking to the ports.
	379
	380	======================================================================*/
	381
f70b7d40 DB	382	static struct pcmcia_device_id ide_ids[] = {
f70b7d40 DB	383	PCMCIA_DEVICE_FUNC_ID(4),
725a6abf	384	PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000), /* Hitachi */
f70b7d40	385	PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
d3feb184 DB	386	PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401),
d3feb184 DB	387	PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
f70b7d40	388	PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
d3feb184	389	PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */
725a6abf	390	PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000), /* Hitachi */
f70b7d40	391	PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001),
d3feb184	392	PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200), /* Lexar */
f70b7d40 DB	393	PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0),
	394	PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74),
	395	PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
	396	PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
	397	PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
	398	PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
	399	PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
	400	PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
d277ad0e	401	PCMCIA_DEVICE_PROD_ID12("EXP", "CD+GAME", 0x6f58c983, 0x63c13aaf),
f70b7d40 DB	402	PCMCIA_DEVICE_PROD_ID12("EXP ", "CD-ROM", 0x0a5c52fd, 0x66536591),
	403	PCMCIA_DEVICE_PROD_ID12("EXP ", "PnPIDE", 0x0a5c52fd, 0x0c694728),
	404	PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
725a6abf RP	405	PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),
725a6abf RP	406	PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
f70b7d40 DB	407	PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
	408	PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b),
	409	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
	410	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
	411	PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b),
2570b746	412	PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
f70b7d40 DB	413	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
	414	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728),
	415	PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1),
	416	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
42935656	417	PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443),
f70b7d40 DB	418	PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
f70b7d40 DB	419	PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
d3feb184	420	PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
698e22c4	421	PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
f70b7d40 DB	422	PCMCIA_DEVICE_NULL,
	423	};
	424	MODULE_DEVICE_TABLE(pcmcia, ide_ids);
	425
1da177e4 LT	426	static struct pcmcia_driver ide_cs_driver = {
	427	.owner = THIS_MODULE,
	428	.drv = {
	429	.name = "ide-cs",
	430	},
f8cfa618	431	.probe = ide_attach,
cc3b4866	432	.remove = ide_detach,
f70b7d40	433	.id_table = ide_ids,
1da177e4 LT	434	};
	435
	436	static int __init init_ide_cs(void)
	437	{
	438	return pcmcia_register_driver(&ide_cs_driver);
	439	}
	440
	441	static void __exit exit_ide_cs(void)
	442	{
	443	pcmcia_unregister_driver(&ide_cs_driver);
1da177e4 LT	444	}
1da177e4 LT	445
2b8d4669	446	late_initcall(init_ide_cs);
1da177e4	447	module_exit(exit_ide_cs);