]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * IDE tuning and bus mastering support for the CS5510/CS5520 | |
3 | * chipsets | |
4 | * | |
5 | * The CS5510/CS5520 are slightly unusual devices. Unlike the | |
6 | * typical IDE controllers they do bus mastering with the drive in | |
7 | * PIO mode and smarter silicon. | |
8 | * | |
9 | * The practical upshot of this is that we must always tune the | |
10 | * drive for the right PIO mode. We must also ignore all the blacklists | |
11 | * and the drive bus mastering DMA information. | |
12 | * | |
13 | * *** This driver is strictly experimental *** | |
14 | * | |
15 | * (c) Copyright Red Hat Inc 2002 | |
16 | * | |
17 | * This program is free software; you can redistribute it and/or modify it | |
18 | * under the terms of the GNU General Public License as published by the | |
19 | * Free Software Foundation; either version 2, or (at your option) any | |
20 | * later version. | |
21 | * | |
22 | * This program is distributed in the hope that it will be useful, but | |
23 | * WITHOUT ANY WARRANTY; without even the implied warranty of | |
24 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
25 | * General Public License for more details. | |
26 | * | |
27 | * For the avoidance of doubt the "preferred form" of this code is one which | |
28 | * is in an open non patent encumbered format. Where cryptographic key signing | |
29 | * forms part of the process of creating an executable the information | |
30 | * including keys needed to generate an equivalently functional executable | |
31 | * are deemed to be part of the source code. | |
32 | * | |
33 | */ | |
34 | ||
1da177e4 LT |
35 | #include <linux/module.h> |
36 | #include <linux/types.h> | |
37 | #include <linux/kernel.h> | |
38 | #include <linux/delay.h> | |
39 | #include <linux/timer.h> | |
40 | #include <linux/mm.h> | |
41 | #include <linux/ioport.h> | |
42 | #include <linux/blkdev.h> | |
43 | #include <linux/hdreg.h> | |
44 | ||
45 | #include <linux/interrupt.h> | |
46 | #include <linux/init.h> | |
47 | #include <linux/pci.h> | |
48 | #include <linux/ide.h> | |
49 | #include <linux/dma-mapping.h> | |
50 | ||
51 | #include <asm/io.h> | |
52 | #include <asm/irq.h> | |
53 | ||
54 | struct pio_clocks | |
55 | { | |
56 | int address; | |
57 | int assert; | |
58 | int recovery; | |
59 | }; | |
60 | ||
61 | static struct pio_clocks cs5520_pio_clocks[]={ | |
62 | {3, 6, 11}, | |
63 | {2, 5, 6}, | |
64 | {1, 4, 3}, | |
65 | {1, 3, 2}, | |
66 | {1, 2, 1} | |
67 | }; | |
68 | ||
8f4dd2e4 | 69 | static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio) |
1da177e4 LT |
70 | { |
71 | ide_hwif_t *hwif = HWIF(drive); | |
72 | struct pci_dev *pdev = hwif->pci_dev; | |
1da177e4 | 73 | int controller = drive->dn > 1 ? 1 : 0; |
8f4dd2e4 | 74 | u8 reg; |
f212ff28 | 75 | |
1da177e4 LT |
76 | /* FIXME: if DMA = 1 do we need to set the DMA bit here ? */ |
77 | ||
78 | /* 8bit CAT/CRT - 8bit command timing for channel */ | |
79 | pci_write_config_byte(pdev, 0x62 + controller, | |
80 | (cs5520_pio_clocks[pio].recovery << 4) | | |
81 | (cs5520_pio_clocks[pio].assert)); | |
82 | ||
83 | /* 0x64 - 16bit Primary, 0x68 - 16bit Secondary */ | |
84 | ||
85 | /* FIXME: should these use address ? */ | |
86 | /* Data read timing */ | |
87 | pci_write_config_byte(pdev, 0x64 + 4*controller + (drive->dn&1), | |
88 | (cs5520_pio_clocks[pio].recovery << 4) | | |
89 | (cs5520_pio_clocks[pio].assert)); | |
90 | /* Write command timing */ | |
91 | pci_write_config_byte(pdev, 0x66 + 4*controller + (drive->dn&1), | |
92 | (cs5520_pio_clocks[pio].recovery << 4) | | |
93 | (cs5520_pio_clocks[pio].assert)); | |
94 | ||
95 | /* Set the DMA enable/disable flag */ | |
96 | reg = inb(hwif->dma_base + 0x02 + 8*controller); | |
97 | reg |= 1<<((drive->dn&1)+5); | |
98 | outb(reg, hwif->dma_base + 0x02 + 8*controller); | |
326d72f4 | 99 | } |
26bcb879 | 100 | |
88b2b32b | 101 | static void cs5520_set_dma_mode(ide_drive_t *drive, const u8 speed) |
1da177e4 | 102 | { |
8f4dd2e4 BZ |
103 | printk(KERN_ERR "cs55x0: bad ide timing.\n"); |
104 | ||
105 | cs5520_set_pio_mode(drive, 0); | |
1da177e4 LT |
106 | } |
107 | ||
1da177e4 LT |
108 | /* |
109 | * We wrap the DMA activate to set the vdma flag. This is needed | |
110 | * so that the IDE DMA layer issues PIO not DMA commands over the | |
111 | * DMA channel | |
112 | */ | |
113 | ||
114 | static int cs5520_dma_on(ide_drive_t *drive) | |
115 | { | |
33c1002e | 116 | /* ATAPI is harder so leave it for now */ |
1da177e4 LT |
117 | drive->vdma = 1; |
118 | return 0; | |
119 | } | |
120 | ||
121 | static void __devinit init_hwif_cs5520(ide_hwif_t *hwif) | |
122 | { | |
26bcb879 | 123 | hwif->set_pio_mode = &cs5520_set_pio_mode; |
88b2b32b | 124 | hwif->set_dma_mode = &cs5520_set_dma_mode; |
1da177e4 | 125 | |
dfb23112 BZ |
126 | if (hwif->dma_base == 0) { |
127 | hwif->drives[1].autotune = hwif->drives[0].autotune = 1; | |
1da177e4 LT |
128 | return; |
129 | } | |
326d72f4 | 130 | |
dfb23112 | 131 | hwif->ide_dma_on = &cs5520_dma_on; |
1da177e4 LT |
132 | } |
133 | ||
134 | #define DECLARE_CS_DEV(name_str) \ | |
135 | { \ | |
136 | .name = name_str, \ | |
1da177e4 | 137 | .init_hwif = init_hwif_cs5520, \ |
0ae2e178 | 138 | .host_flags = IDE_HFLAG_ISA_PORTS | \ |
9ffcf364 | 139 | IDE_HFLAG_CS5520 | \ |
33c1002e | 140 | IDE_HFLAG_VDMA | \ |
7cab14a7 BZ |
141 | IDE_HFLAG_NO_ATAPI_DMA | \ |
142 | IDE_HFLAG_BOOTABLE, \ | |
4099d143 | 143 | .pio_mask = ATA_PIO4, \ |
1da177e4 LT |
144 | } |
145 | ||
146 | static ide_pci_device_t cyrix_chipsets[] __devinitdata = { | |
147 | /* 0 */ DECLARE_CS_DEV("Cyrix 5510"), | |
148 | /* 1 */ DECLARE_CS_DEV("Cyrix 5520") | |
149 | }; | |
150 | ||
151 | /* | |
152 | * The 5510/5520 are a bit weird. They don't quite set up the way | |
153 | * the PCI helper layer expects so we must do much of the set up | |
154 | * work longhand. | |
155 | */ | |
156 | ||
157 | static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id) | |
158 | { | |
5cbf79cd | 159 | ide_hwif_t *hwif = NULL, *mate = NULL; |
1da177e4 LT |
160 | ata_index_t index; |
161 | ide_pci_device_t *d = &cyrix_chipsets[id->driver_data]; | |
162 | ||
163 | ide_setup_pci_noise(dev, d); | |
164 | ||
165 | /* We must not grab the entire device, it has 'ISA' space in its | |
166 | BARS too and we will freak out other bits of the kernel */ | |
1e39dead | 167 | if (pci_enable_device_bars(dev, 1<<2)) { |
1da177e4 | 168 | printk(KERN_WARNING "%s: Unable to enable 55x0.\n", d->name); |
1e39dead | 169 | return -ENODEV; |
1da177e4 LT |
170 | } |
171 | pci_set_master(dev); | |
172 | if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) { | |
173 | printk(KERN_WARNING "cs5520: No suitable DMA available.\n"); | |
174 | return -ENODEV; | |
175 | } | |
176 | ||
177 | index.all = 0xf0f0; | |
178 | ||
179 | /* | |
180 | * Now the chipset is configured we can let the core | |
181 | * do all the device setup for us | |
182 | */ | |
183 | ||
184 | ide_pci_setup_ports(dev, d, 14, &index); | |
185 | ||
5cbf79cd BZ |
186 | if ((index.b.low & 0xf0) != 0xf0) |
187 | hwif = &ide_hwifs[index.b.low]; | |
188 | if ((index.b.high & 0xf0) != 0xf0) | |
189 | mate = &ide_hwifs[index.b.high]; | |
190 | ||
191 | if (hwif) | |
192 | probe_hwif_init(hwif); | |
193 | if (mate) | |
194 | probe_hwif_init(mate); | |
195 | ||
196 | if (hwif) | |
197 | ide_proc_register_port(hwif); | |
198 | if (mate) | |
199 | ide_proc_register_port(mate); | |
200 | ||
1da177e4 LT |
201 | return 0; |
202 | } | |
203 | ||
9cbcc5e3 BZ |
204 | static const struct pci_device_id cs5520_pci_tbl[] = { |
205 | { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5510), 0 }, | |
206 | { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5520), 1 }, | |
1da177e4 LT |
207 | { 0, }, |
208 | }; | |
209 | MODULE_DEVICE_TABLE(pci, cs5520_pci_tbl); | |
210 | ||
211 | static struct pci_driver driver = { | |
212 | .name = "Cyrix_IDE", | |
213 | .id_table = cs5520_pci_tbl, | |
214 | .probe = cs5520_init_one, | |
215 | }; | |
216 | ||
82ab1eec | 217 | static int __init cs5520_ide_init(void) |
1da177e4 LT |
218 | { |
219 | return ide_pci_register_driver(&driver); | |
220 | } | |
221 | ||
222 | module_init(cs5520_ide_init); | |
223 | ||
224 | MODULE_AUTHOR("Alan Cox"); | |
225 | MODULE_DESCRIPTION("PCI driver module for Cyrix 5510/5520 IDE"); | |
226 | MODULE_LICENSE("GPL"); |