]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * linux/drivers/ide/pci/ns87415.c Version 2.00 Sep. 10, 2002 | |
3 | * | |
4 | * Copyright (C) 1997-1998 Mark Lord <mlord@pobox.com> | |
5 | * Copyright (C) 1998 Eddie C. Dost <ecd@skynet.be> | |
6 | * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org> | |
7 | * Copyright (C) 2004 Grant Grundler <grundler at parisc-linux.org> | |
8 | * | |
9 | * Inspired by an earlier effort from David S. Miller <davem@redhat.com> | |
10 | */ | |
11 | ||
12 | #include <linux/config.h> | |
13 | #include <linux/module.h> | |
14 | #include <linux/types.h> | |
15 | #include <linux/kernel.h> | |
16 | #include <linux/timer.h> | |
17 | #include <linux/mm.h> | |
18 | #include <linux/ioport.h> | |
19 | #include <linux/interrupt.h> | |
20 | #include <linux/blkdev.h> | |
21 | #include <linux/hdreg.h> | |
22 | #include <linux/pci.h> | |
23 | #include <linux/delay.h> | |
24 | #include <linux/ide.h> | |
25 | #include <linux/init.h> | |
26 | ||
27 | #include <asm/io.h> | |
28 | ||
29 | #ifdef CONFIG_SUPERIO | |
30 | /* SUPERIO 87560 is a PoS chip that NatSem denies exists. | |
31 | * Unfortunately, it's built-in on all Astro-based PA-RISC workstations | |
32 | * which use the integrated NS87514 cell for CD-ROM support. | |
33 | * i.e we have to support for CD-ROM installs. | |
34 | * See drivers/parisc/superio.c for more gory details. | |
35 | */ | |
36 | #include <asm/superio.h> | |
37 | ||
38 | static unsigned long superio_ide_status[2]; | |
39 | static unsigned long superio_ide_select[2]; | |
40 | static unsigned long superio_ide_dma_status[2]; | |
41 | ||
42 | #define SUPERIO_IDE_MAX_RETRIES 25 | |
43 | ||
44 | /* Because of a defect in Super I/O, all reads of the PCI DMA status | |
45 | * registers, IDE status register and the IDE select register need to be | |
46 | * retried | |
47 | */ | |
48 | static u8 superio_ide_inb (unsigned long port) | |
49 | { | |
50 | if (port == superio_ide_status[0] || | |
51 | port == superio_ide_status[1] || | |
52 | port == superio_ide_select[0] || | |
53 | port == superio_ide_select[1] || | |
54 | port == superio_ide_dma_status[0] || | |
55 | port == superio_ide_dma_status[1]) { | |
56 | u8 tmp; | |
57 | int retries = SUPERIO_IDE_MAX_RETRIES; | |
58 | ||
59 | /* printk(" [ reading port 0x%x with retry ] ", port); */ | |
60 | ||
61 | do { | |
62 | tmp = inb(port); | |
63 | if (tmp == 0) | |
64 | udelay(50); | |
65 | } while (tmp == 0 && retries-- > 0); | |
66 | ||
67 | return tmp; | |
68 | } | |
69 | ||
70 | return inb(port); | |
71 | } | |
72 | ||
73 | static void __devinit superio_ide_init_iops (struct hwif_s *hwif) | |
74 | { | |
75 | u32 base, dmabase; | |
76 | u8 tmp; | |
77 | struct pci_dev *pdev = hwif->pci_dev; | |
78 | u8 port = hwif->channel; | |
79 | ||
80 | base = pci_resource_start(pdev, port * 2) & ~3; | |
81 | dmabase = pci_resource_start(pdev, 4) & ~3; | |
82 | ||
83 | superio_ide_status[port] = base + IDE_STATUS_OFFSET; | |
84 | superio_ide_select[port] = base + IDE_SELECT_OFFSET; | |
85 | superio_ide_dma_status[port] = dmabase + (!port ? 2 : 0xa); | |
86 | ||
87 | /* Clear error/interrupt, enable dma */ | |
88 | tmp = superio_ide_inb(superio_ide_dma_status[port]); | |
89 | outb(tmp | 0x66, superio_ide_dma_status[port]); | |
90 | ||
91 | /* We need to override inb to workaround a SuperIO errata */ | |
92 | hwif->INB = superio_ide_inb; | |
93 | } | |
94 | ||
95 | static void __devinit init_iops_ns87415(ide_hwif_t *hwif) | |
96 | { | |
97 | if (PCI_SLOT(hwif->pci_dev->devfn) == 0xE) { | |
98 | /* Built-in - assume it's under superio. */ | |
99 | superio_ide_init_iops(hwif); | |
100 | } | |
101 | } | |
102 | #endif | |
103 | ||
104 | static unsigned int ns87415_count = 0, ns87415_control[MAX_HWIFS] = { 0 }; | |
105 | ||
106 | /* | |
107 | * This routine either enables/disables (according to drive->present) | |
108 | * the IRQ associated with the port (HWIF(drive)), | |
109 | * and selects either PIO or DMA handshaking for the next I/O operation. | |
110 | */ | |
111 | static void ns87415_prepare_drive (ide_drive_t *drive, unsigned int use_dma) | |
112 | { | |
113 | ide_hwif_t *hwif = HWIF(drive); | |
114 | unsigned int bit, other, new, *old = (unsigned int *) hwif->select_data; | |
115 | struct pci_dev *dev = hwif->pci_dev; | |
116 | unsigned long flags; | |
117 | ||
118 | local_irq_save(flags); | |
119 | new = *old; | |
120 | ||
121 | /* Adjust IRQ enable bit */ | |
122 | bit = 1 << (8 + hwif->channel); | |
123 | new = drive->present ? (new & ~bit) : (new | bit); | |
124 | ||
125 | /* Select PIO or DMA, DMA may only be selected for one drive/channel. */ | |
126 | bit = 1 << (20 + drive->select.b.unit + (hwif->channel << 1)); | |
127 | other = 1 << (20 + (1 - drive->select.b.unit) + (hwif->channel << 1)); | |
128 | new = use_dma ? ((new & ~other) | bit) : (new & ~bit); | |
129 | ||
130 | if (new != *old) { | |
131 | unsigned char stat; | |
132 | ||
133 | /* | |
134 | * Don't change DMA engine settings while Write Buffers | |
135 | * are busy. | |
136 | */ | |
137 | (void) pci_read_config_byte(dev, 0x43, &stat); | |
138 | while (stat & 0x03) { | |
139 | udelay(1); | |
140 | (void) pci_read_config_byte(dev, 0x43, &stat); | |
141 | } | |
142 | ||
143 | *old = new; | |
144 | (void) pci_write_config_dword(dev, 0x40, new); | |
145 | ||
146 | /* | |
147 | * And let things settle... | |
148 | */ | |
149 | udelay(10); | |
150 | } | |
151 | ||
152 | local_irq_restore(flags); | |
153 | } | |
154 | ||
155 | static void ns87415_selectproc (ide_drive_t *drive) | |
156 | { | |
157 | ns87415_prepare_drive (drive, drive->using_dma); | |
158 | } | |
159 | ||
160 | static int ns87415_ide_dma_end (ide_drive_t *drive) | |
161 | { | |
162 | ide_hwif_t *hwif = HWIF(drive); | |
163 | u8 dma_stat = 0, dma_cmd = 0; | |
164 | ||
165 | drive->waiting_for_dma = 0; | |
166 | dma_stat = hwif->INB(hwif->dma_status); | |
167 | /* get dma command mode */ | |
168 | dma_cmd = hwif->INB(hwif->dma_command); | |
169 | /* stop DMA */ | |
170 | hwif->OUTB(dma_cmd & ~1, hwif->dma_command); | |
171 | /* from ERRATA: clear the INTR & ERROR bits */ | |
172 | dma_cmd = hwif->INB(hwif->dma_command); | |
173 | hwif->OUTB(dma_cmd|6, hwif->dma_command); | |
174 | /* and free any DMA resources */ | |
175 | ide_destroy_dmatable(drive); | |
176 | /* verify good DMA status */ | |
177 | return (dma_stat & 7) != 4; | |
178 | } | |
179 | ||
180 | static int ns87415_ide_dma_setup(ide_drive_t *drive) | |
181 | { | |
182 | /* select DMA xfer */ | |
183 | ns87415_prepare_drive(drive, 1); | |
184 | if (!ide_dma_setup(drive)) | |
185 | return 0; | |
186 | /* DMA failed: select PIO xfer */ | |
187 | ns87415_prepare_drive(drive, 0); | |
188 | return 1; | |
189 | } | |
190 | ||
191 | static int ns87415_ide_dma_check (ide_drive_t *drive) | |
192 | { | |
193 | if (drive->media != ide_disk) | |
194 | return HWIF(drive)->ide_dma_off_quietly(drive); | |
195 | return __ide_dma_check(drive); | |
196 | } | |
197 | ||
c20530ed | 198 | static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif) |
1da177e4 LT |
199 | { |
200 | struct pci_dev *dev = hwif->pci_dev; | |
201 | unsigned int ctrl, using_inta; | |
202 | u8 progif; | |
203 | #ifdef __sparc_v9__ | |
204 | int timeout; | |
205 | u8 stat; | |
206 | #endif | |
207 | ||
208 | hwif->autodma = 0; | |
209 | hwif->selectproc = &ns87415_selectproc; | |
210 | ||
211 | /* | |
212 | * We cannot probe for IRQ: both ports share common IRQ on INTA. | |
213 | * Also, leave IRQ masked during drive probing, to prevent infinite | |
214 | * interrupts from a potentially floating INTA.. | |
215 | * | |
216 | * IRQs get unmasked in selectproc when drive is first used. | |
217 | */ | |
218 | (void) pci_read_config_dword(dev, 0x40, &ctrl); | |
219 | (void) pci_read_config_byte(dev, 0x09, &progif); | |
220 | /* is irq in "native" mode? */ | |
221 | using_inta = progif & (1 << (hwif->channel << 1)); | |
222 | if (!using_inta) | |
223 | using_inta = ctrl & (1 << (4 + hwif->channel)); | |
224 | if (hwif->mate) { | |
225 | hwif->select_data = hwif->mate->select_data; | |
226 | } else { | |
227 | hwif->select_data = (unsigned long) | |
228 | &ns87415_control[ns87415_count++]; | |
229 | ctrl |= (1 << 8) | (1 << 9); /* mask both IRQs */ | |
230 | if (using_inta) | |
231 | ctrl &= ~(1 << 6); /* unmask INTA */ | |
232 | *((unsigned int *)hwif->select_data) = ctrl; | |
233 | (void) pci_write_config_dword(dev, 0x40, ctrl); | |
234 | ||
235 | /* | |
236 | * Set prefetch size to 512 bytes for both ports, | |
237 | * but don't turn on/off prefetching here. | |
238 | */ | |
239 | pci_write_config_byte(dev, 0x55, 0xee); | |
240 | ||
241 | #ifdef __sparc_v9__ | |
242 | /* | |
243 | * XXX: Reset the device, if we don't it will not respond | |
244 | * to SELECT_DRIVE() properly during first probe_hwif(). | |
245 | */ | |
246 | timeout = 10000; | |
247 | hwif->OUTB(12, hwif->io_ports[IDE_CONTROL_OFFSET]); | |
248 | udelay(10); | |
249 | hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]); | |
250 | do { | |
251 | udelay(50); | |
252 | stat = hwif->INB(hwif->io_ports[IDE_STATUS_OFFSET]); | |
253 | if (stat == 0xff) | |
254 | break; | |
255 | } while ((stat & BUSY_STAT) && --timeout); | |
256 | #endif | |
257 | } | |
258 | ||
259 | if (!using_inta) | |
260 | hwif->irq = ide_default_irq(hwif->io_ports[IDE_DATA_OFFSET]); | |
261 | else if (!hwif->irq && hwif->mate && hwif->mate->irq) | |
262 | hwif->irq = hwif->mate->irq; /* share IRQ with mate */ | |
263 | ||
264 | if (!hwif->dma_base) | |
265 | return; | |
266 | ||
267 | hwif->OUTB(0x60, hwif->dma_status); | |
268 | hwif->dma_setup = &ns87415_ide_dma_setup; | |
269 | hwif->ide_dma_check = &ns87415_ide_dma_check; | |
270 | hwif->ide_dma_end = &ns87415_ide_dma_end; | |
271 | ||
272 | if (!noautodma) | |
273 | hwif->autodma = 1; | |
274 | hwif->drives[0].autodma = hwif->autodma; | |
275 | hwif->drives[1].autodma = hwif->autodma; | |
276 | } | |
277 | ||
278 | static ide_pci_device_t ns87415_chipset __devinitdata = { | |
279 | .name = "NS87415", | |
280 | #ifdef CONFIG_SUPERIO | |
281 | .init_iops = init_iops_ns87415, | |
282 | #endif | |
283 | .init_hwif = init_hwif_ns87415, | |
284 | .channels = 2, | |
285 | .autodma = AUTODMA, | |
286 | .bootable = ON_BOARD, | |
287 | }; | |
288 | ||
289 | static int __devinit ns87415_init_one(struct pci_dev *dev, const struct pci_device_id *id) | |
290 | { | |
291 | return ide_setup_pci_device(dev, &ns87415_chipset); | |
292 | } | |
293 | ||
294 | static struct pci_device_id ns87415_pci_tbl[] = { | |
295 | { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87415, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, | |
296 | { 0, }, | |
297 | }; | |
298 | MODULE_DEVICE_TABLE(pci, ns87415_pci_tbl); | |
299 | ||
300 | static struct pci_driver driver = { | |
301 | .name = "NS87415_IDE", | |
302 | .id_table = ns87415_pci_tbl, | |
303 | .probe = ns87415_init_one, | |
304 | }; | |
305 | ||
306 | static int ns87415_ide_init(void) | |
307 | { | |
308 | return ide_pci_register_driver(&driver); | |
309 | } | |
310 | ||
311 | module_init(ns87415_ide_init); | |
312 | ||
313 | MODULE_AUTHOR("Mark Lord, Eddie Dost, Andre Hedrick"); | |
314 | MODULE_DESCRIPTION("PCI driver module for NS87415 IDE"); | |
315 | MODULE_LICENSE("GPL"); |