]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/blame - drivers/ide/pci/scc_pata.c
ide: pass hw_regs_t-s to ide_device_add[_all]() (take 3)
[mirror_ubuntu-bionic-kernel.git] / drivers / ide / pci / scc_pata.c
CommitLineData
bde18a2e
KI
1/*
2 * Support for IDE interfaces on Celleb platform
3 *
4 * (C) Copyright 2006 TOSHIBA CORPORATION
5 *
6 * This code is based on drivers/ide/pci/siimage.c:
7 * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
8 * Copyright (C) 2003 Red Hat <alan@redhat.com>
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License along
21 * with this program; if not, write to the Free Software Foundation, Inc.,
22 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
23 */
24
25#include <linux/types.h>
26#include <linux/module.h>
27#include <linux/pci.h>
28#include <linux/delay.h>
29#include <linux/hdreg.h>
30#include <linux/ide.h>
31#include <linux/init.h>
32
33#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4
34
35#define SCC_PATA_NAME "scc IDE"
36
37#define TDVHSEL_MASTER 0x00000001
38#define TDVHSEL_SLAVE 0x00000004
39
40#define MODE_JCUSFEN 0x00000080
41
42#define CCKCTRL_ATARESET 0x00040000
43#define CCKCTRL_BUFCNT 0x00020000
44#define CCKCTRL_CRST 0x00010000
45#define CCKCTRL_OCLKEN 0x00000100
46#define CCKCTRL_ATACLKOEN 0x00000002
47#define CCKCTRL_LCLKEN 0x00000001
48
49#define QCHCD_IOS_SS 0x00000001
50
51#define QCHSD_STPDIAG 0x00020000
52
53#define INTMASK_MSK 0xD1000012
54#define INTSTS_SERROR 0x80000000
55#define INTSTS_PRERR 0x40000000
56#define INTSTS_RERR 0x10000000
57#define INTSTS_ICERR 0x01000000
58#define INTSTS_BMSINT 0x00000010
59#define INTSTS_BMHE 0x00000008
60#define INTSTS_IOIRQS 0x00000004
61#define INTSTS_INTRQ 0x00000002
62#define INTSTS_ACTEINT 0x00000001
63
64#define ECMODE_VALUE 0x01
65
66static struct scc_ports {
67 unsigned long ctl, dma;
589b0626 68 ide_hwif_t *hwif; /* for removing port from system */
bde18a2e
KI
69} scc_ports[MAX_HWIFS];
70
71/* PIO transfer mode table */
72/* JCHST */
73static unsigned long JCHSTtbl[2][7] = {
74 {0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */
75 {0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */
76};
77
78/* JCHHT */
79static unsigned long JCHHTtbl[2][7] = {
80 {0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */
81 {0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */
82};
83
84/* JCHCT */
85static unsigned long JCHCTtbl[2][7] = {
86 {0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */
87 {0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */
88};
89
90
91/* DMA transfer mode table */
92/* JCHDCTM/JCHDCTS */
93static unsigned long JCHDCTxtbl[2][7] = {
94 {0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */
95 {0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */
96};
97
98/* JCSTWTM/JCSTWTS */
99static unsigned long JCSTWTxtbl[2][7] = {
100 {0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */
101 {0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
102};
103
104/* JCTSS */
105static unsigned long JCTSStbl[2][7] = {
106 {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */
107 {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */
108};
109
110/* JCENVT */
111static unsigned long JCENVTtbl[2][7] = {
112 {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */
113 {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
114};
115
116/* JCACTSELS/JCACTSELM */
117static unsigned long JCACTSELtbl[2][7] = {
118 {0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */
119 {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */
120};
121
122
123static u8 scc_ide_inb(unsigned long port)
124{
125 u32 data = in_be32((void*)port);
126 return (u8)data;
127}
128
bde18a2e
KI
129static void scc_ide_insw(unsigned long port, void *addr, u32 count)
130{
131 u16 *ptr = (u16 *)addr;
132 while (count--) {
133 *ptr++ = le16_to_cpu(in_be32((void*)port));
134 }
135}
136
137static void scc_ide_insl(unsigned long port, void *addr, u32 count)
138{
139 u16 *ptr = (u16 *)addr;
140 while (count--) {
141 *ptr++ = le16_to_cpu(in_be32((void*)port));
142 *ptr++ = le16_to_cpu(in_be32((void*)port));
143 }
144}
145
146static void scc_ide_outb(u8 addr, unsigned long port)
147{
148 out_be32((void*)port, addr);
149}
150
f8c4bd0a 151static void scc_ide_outbsync(ide_hwif_t *hwif, u8 addr, unsigned long port)
bde18a2e 152{
bde18a2e 153 out_be32((void*)port, addr);
f644d47a 154 eieio();
bde18a2e 155 in_be32((void*)(hwif->dma_base + 0x01c));
f644d47a 156 eieio();
bde18a2e
KI
157}
158
159static void
160scc_ide_outsw(unsigned long port, void *addr, u32 count)
161{
162 u16 *ptr = (u16 *)addr;
163 while (count--) {
164 out_be32((void*)port, cpu_to_le16(*ptr++));
165 }
166}
167
168static void
169scc_ide_outsl(unsigned long port, void *addr, u32 count)
170{
171 u16 *ptr = (u16 *)addr;
172 while (count--) {
173 out_be32((void*)port, cpu_to_le16(*ptr++));
174 out_be32((void*)port, cpu_to_le16(*ptr++));
175 }
176}
177
bde18a2e 178/**
88b2b32b
BZ
179 * scc_set_pio_mode - set host controller for PIO mode
180 * @drive: drive
181 * @pio: PIO mode number
bde18a2e
KI
182 *
183 * Load the timing settings for this device mode into the
184 * controller.
185 */
186
88b2b32b 187static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio)
bde18a2e
KI
188{
189 ide_hwif_t *hwif = HWIF(drive);
190 struct scc_ports *ports = ide_get_hwifdata(hwif);
191 unsigned long ctl_base = ports->ctl;
192 unsigned long cckctrl_port = ctl_base + 0xff0;
193 unsigned long piosht_port = ctl_base + 0x000;
194 unsigned long pioct_port = ctl_base + 0x004;
195 unsigned long reg;
bde18a2e
KI
196 int offset;
197
0ecdca26 198 reg = in_be32((void __iomem *)cckctrl_port);
bde18a2e
KI
199 if (reg & CCKCTRL_ATACLKOEN) {
200 offset = 1; /* 133MHz */
201 } else {
202 offset = 0; /* 100MHz */
203 }
3fcece66 204 reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio];
0ecdca26 205 out_be32((void __iomem *)piosht_port, reg);
3fcece66 206 reg = JCHCTtbl[offset][pio];
0ecdca26 207 out_be32((void __iomem *)pioct_port, reg);
3fcece66 208}
bde18a2e 209
bde18a2e 210/**
88b2b32b
BZ
211 * scc_set_dma_mode - set host controller for DMA mode
212 * @drive: drive
213 * @speed: DMA mode
bde18a2e
KI
214 *
215 * Load the timing settings for this device mode into the
216 * controller.
217 */
218
88b2b32b 219static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed)
bde18a2e
KI
220{
221 ide_hwif_t *hwif = HWIF(drive);
bde18a2e
KI
222 struct scc_ports *ports = ide_get_hwifdata(hwif);
223 unsigned long ctl_base = ports->ctl;
224 unsigned long cckctrl_port = ctl_base + 0xff0;
225 unsigned long mdmact_port = ctl_base + 0x008;
226 unsigned long mcrcst_port = ctl_base + 0x00c;
227 unsigned long sdmact_port = ctl_base + 0x010;
228 unsigned long scrcst_port = ctl_base + 0x014;
229 unsigned long udenvt_port = ctl_base + 0x018;
230 unsigned long tdvhsel_port = ctl_base + 0x020;
231 int is_slave = (&hwif->drives[1] == drive);
232 int offset, idx;
233 unsigned long reg;
234 unsigned long jcactsel;
235
0ecdca26 236 reg = in_be32((void __iomem *)cckctrl_port);
bde18a2e
KI
237 if (reg & CCKCTRL_ATACLKOEN) {
238 offset = 1; /* 133MHz */
239 } else {
240 offset = 0; /* 100MHz */
241 }
242
4db90a14 243 idx = speed - XFER_UDMA_0;
bde18a2e
KI
244
245 jcactsel = JCACTSELtbl[offset][idx];
246 if (is_slave) {
0ecdca26
BZ
247 out_be32((void __iomem *)sdmact_port, JCHDCTxtbl[offset][idx]);
248 out_be32((void __iomem *)scrcst_port, JCSTWTxtbl[offset][idx]);
249 jcactsel = jcactsel << 2;
250 out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_SLAVE) | jcactsel);
bde18a2e 251 } else {
0ecdca26
BZ
252 out_be32((void __iomem *)mdmact_port, JCHDCTxtbl[offset][idx]);
253 out_be32((void __iomem *)mcrcst_port, JCSTWTxtbl[offset][idx]);
254 out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_MASTER) | jcactsel);
bde18a2e
KI
255 }
256 reg = JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx];
0ecdca26 257 out_be32((void __iomem *)udenvt_port, reg);
bde18a2e
KI
258}
259
669185e9
BZ
260static void scc_dma_host_set(ide_drive_t *drive, int on)
261{
262 ide_hwif_t *hwif = drive->hwif;
263 u8 unit = (drive->select.b.unit & 0x01);
264 u8 dma_stat = scc_ide_inb(hwif->dma_status);
265
266 if (on)
267 dma_stat |= (1 << (5 + unit));
268 else
269 dma_stat &= ~(1 << (5 + unit));
270
271 scc_ide_outb(dma_stat, hwif->dma_status);
272}
273
0ecdca26
BZ
274/**
275 * scc_ide_dma_setup - begin a DMA phase
276 * @drive: target device
277 *
278 * Build an IDE DMA PRD (IDE speak for scatter gather table)
279 * and then set up the DMA transfer registers.
280 *
281 * Returns 0 on success. If a PIO fallback is required then 1
282 * is returned.
283 */
284
285static int scc_dma_setup(ide_drive_t *drive)
286{
287 ide_hwif_t *hwif = drive->hwif;
288 struct request *rq = HWGROUP(drive)->rq;
289 unsigned int reading;
290 u8 dma_stat;
291
292 if (rq_data_dir(rq))
293 reading = 0;
294 else
295 reading = 1 << 3;
296
297 /* fall back to pio! */
298 if (!ide_build_dmatable(drive, rq)) {
299 ide_map_sg(drive, rq);
300 return 1;
301 }
302
303 /* PRD table */
55224bc8 304 out_be32((void __iomem *)(hwif->dma_base + 8), hwif->dmatable_dma);
0ecdca26
BZ
305
306 /* specify r/w */
307 out_be32((void __iomem *)hwif->dma_command, reading);
308
309 /* read dma_status for INTR & ERROR flags */
310 dma_stat = in_be32((void __iomem *)hwif->dma_status);
311
312 /* clear INTR & ERROR flags */
313 out_be32((void __iomem *)hwif->dma_status, dma_stat|6);
314 drive->waiting_for_dma = 1;
315 return 0;
316}
317
669185e9
BZ
318static void scc_dma_start(ide_drive_t *drive)
319{
320 ide_hwif_t *hwif = drive->hwif;
321 u8 dma_cmd = scc_ide_inb(hwif->dma_command);
322
323 /* start DMA */
324 scc_ide_outb(dma_cmd | 1, hwif->dma_command);
325 hwif->dma = 1;
326 wmb();
327}
328
329static int __scc_dma_end(ide_drive_t *drive)
330{
331 ide_hwif_t *hwif = drive->hwif;
332 u8 dma_stat, dma_cmd;
333
334 drive->waiting_for_dma = 0;
335 /* get DMA command mode */
336 dma_cmd = scc_ide_inb(hwif->dma_command);
337 /* stop DMA */
338 scc_ide_outb(dma_cmd & ~1, hwif->dma_command);
339 /* get DMA status */
340 dma_stat = scc_ide_inb(hwif->dma_status);
341 /* clear the INTR & ERROR bits */
342 scc_ide_outb(dma_stat | 6, hwif->dma_status);
343 /* purge DMA mappings */
344 ide_destroy_dmatable(drive);
345 /* verify good DMA status */
346 hwif->dma = 0;
347 wmb();
348 return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0;
349}
0ecdca26 350
bde18a2e 351/**
5e37bdc0 352 * scc_dma_end - Stop DMA
bde18a2e
KI
353 * @drive: IDE drive
354 *
355 * Check and clear INT Status register.
669185e9 356 * Then call __scc_dma_end().
bde18a2e
KI
357 */
358
5e37bdc0 359static int scc_dma_end(ide_drive_t *drive)
bde18a2e
KI
360{
361 ide_hwif_t *hwif = HWIF(drive);
362 unsigned long intsts_port = hwif->dma_base + 0x014;
363 u32 reg;
4ae41ff8
KI
364 int dma_stat, data_loss = 0;
365 static int retry = 0;
366
367 /* errata A308 workaround: Step5 (check data loss) */
368 /* We don't check non ide_disk because it is limited to UDMA4 */
4c3032d8 369 if (!(in_be32((void __iomem *)hwif->io_ports.ctl_addr)
23579a2a 370 & ERR_STAT) &&
4ae41ff8
KI
371 drive->media == ide_disk && drive->current_speed > XFER_UDMA_4) {
372 reg = in_be32((void __iomem *)intsts_port);
373 if (!(reg & INTSTS_ACTEINT)) {
374 printk(KERN_WARNING "%s: operation failed (transfer data loss)\n",
375 drive->name);
376 data_loss = 1;
377 if (retry++) {
378 struct request *rq = HWGROUP(drive)->rq;
379 int unit;
380 /* ERROR_RESET and drive->crc_count are needed
381 * to reduce DMA transfer mode in retry process.
382 */
383 if (rq)
384 rq->errors |= ERROR_RESET;
385 for (unit = 0; unit < MAX_DRIVES; unit++) {
386 ide_drive_t *drive = &hwif->drives[unit];
387 drive->crc_count++;
388 }
389 }
390 }
391 }
bde18a2e
KI
392
393 while (1) {
0ecdca26 394 reg = in_be32((void __iomem *)intsts_port);
bde18a2e
KI
395
396 if (reg & INTSTS_SERROR) {
397 printk(KERN_WARNING "%s: SERROR\n", SCC_PATA_NAME);
0ecdca26 398 out_be32((void __iomem *)intsts_port, INTSTS_SERROR|INTSTS_BMSINT);
bde18a2e 399
0ecdca26 400 out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
bde18a2e
KI
401 continue;
402 }
403
404 if (reg & INTSTS_PRERR) {
405 u32 maea0, maec0;
406 unsigned long ctl_base = hwif->config_data;
407
0ecdca26
BZ
408 maea0 = in_be32((void __iomem *)(ctl_base + 0xF50));
409 maec0 = in_be32((void __iomem *)(ctl_base + 0xF54));
bde18a2e
KI
410
411 printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", SCC_PATA_NAME, maea0, maec0);
412
0ecdca26 413 out_be32((void __iomem *)intsts_port, INTSTS_PRERR|INTSTS_BMSINT);
bde18a2e 414
0ecdca26 415 out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
bde18a2e
KI
416 continue;
417 }
418
419 if (reg & INTSTS_RERR) {
420 printk(KERN_WARNING "%s: Response Error\n", SCC_PATA_NAME);
0ecdca26 421 out_be32((void __iomem *)intsts_port, INTSTS_RERR|INTSTS_BMSINT);
bde18a2e 422
0ecdca26 423 out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
bde18a2e
KI
424 continue;
425 }
426
427 if (reg & INTSTS_ICERR) {
0ecdca26 428 out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
bde18a2e
KI
429
430 printk(KERN_WARNING "%s: Illegal Configuration\n", SCC_PATA_NAME);
0ecdca26 431 out_be32((void __iomem *)intsts_port, INTSTS_ICERR|INTSTS_BMSINT);
bde18a2e
KI
432 continue;
433 }
434
435 if (reg & INTSTS_BMSINT) {
436 printk(KERN_WARNING "%s: Internal Bus Error\n", SCC_PATA_NAME);
0ecdca26 437 out_be32((void __iomem *)intsts_port, INTSTS_BMSINT);
bde18a2e
KI
438
439 ide_do_reset(drive);
440 continue;
441 }
442
443 if (reg & INTSTS_BMHE) {
0ecdca26 444 out_be32((void __iomem *)intsts_port, INTSTS_BMHE);
bde18a2e
KI
445 continue;
446 }
447
448 if (reg & INTSTS_ACTEINT) {
0ecdca26 449 out_be32((void __iomem *)intsts_port, INTSTS_ACTEINT);
bde18a2e
KI
450 continue;
451 }
452
453 if (reg & INTSTS_IOIRQS) {
0ecdca26 454 out_be32((void __iomem *)intsts_port, INTSTS_IOIRQS);
bde18a2e
KI
455 continue;
456 }
457 break;
458 }
459
669185e9 460 dma_stat = __scc_dma_end(drive);
4ae41ff8
KI
461 if (data_loss)
462 dma_stat |= 2; /* emulate DMA error (to retry command) */
463 return dma_stat;
bde18a2e
KI
464}
465
06a9952b
AI
466/* returns 1 if dma irq issued, 0 otherwise */
467static int scc_dma_test_irq(ide_drive_t *drive)
468{
4ae41ff8
KI
469 ide_hwif_t *hwif = HWIF(drive);
470 u32 int_stat = in_be32((void __iomem *)hwif->dma_base + 0x014);
06a9952b 471
4ae41ff8 472 /* SCC errata A252,A308 workaround: Step4 */
4c3032d8 473 if ((in_be32((void __iomem *)hwif->io_ports.ctl_addr)
23579a2a 474 & ERR_STAT) &&
4ae41ff8 475 (int_stat & INTSTS_INTRQ))
06a9952b
AI
476 return 1;
477
4ae41ff8
KI
478 /* SCC errata A308 workaround: Step5 (polling IOIRQS) */
479 if (int_stat & INTSTS_IOIRQS)
06a9952b
AI
480 return 1;
481
482 if (!drive->waiting_for_dma)
483 printk(KERN_WARNING "%s: (%s) called while not waiting\n",
eb63963a 484 drive->name, __func__);
06a9952b
AI
485 return 0;
486}
487
4ae41ff8
KI
488static u8 scc_udma_filter(ide_drive_t *drive)
489{
490 ide_hwif_t *hwif = drive->hwif;
491 u8 mask = hwif->ultra_mask;
492
493 /* errata A308 workaround: limit non ide_disk drive to UDMA4 */
494 if ((drive->media != ide_disk) && (mask & 0xE0)) {
495 printk(KERN_INFO "%s: limit %s to UDMA4\n",
496 SCC_PATA_NAME, drive->name);
5f8b6c34 497 mask = ATA_UDMA4;
4ae41ff8
KI
498 }
499
500 return mask;
501}
502
bde18a2e
KI
503/**
504 * setup_mmio_scc - map CTRL/BMID region
505 * @dev: PCI device we are configuring
506 * @name: device name
507 *
508 */
509
510static int setup_mmio_scc (struct pci_dev *dev, const char *name)
511{
512 unsigned long ctl_base = pci_resource_start(dev, 0);
513 unsigned long dma_base = pci_resource_start(dev, 1);
514 unsigned long ctl_size = pci_resource_len(dev, 0);
515 unsigned long dma_size = pci_resource_len(dev, 1);
0bd8496b
AV
516 void __iomem *ctl_addr;
517 void __iomem *dma_addr;
0d1bad21 518 int i, ret;
bde18a2e
KI
519
520 for (i = 0; i < MAX_HWIFS; i++) {
521 if (scc_ports[i].ctl == 0)
522 break;
523 }
524 if (i >= MAX_HWIFS)
525 return -ENOMEM;
526
0d1bad21
BZ
527 ret = pci_request_selected_regions(dev, (1 << 2) - 1, name);
528 if (ret < 0) {
529 printk(KERN_ERR "%s: can't reserve resources\n", name);
530 return ret;
bde18a2e
KI
531 }
532
533 if ((ctl_addr = ioremap(ctl_base, ctl_size)) == NULL)
0d1bad21 534 goto fail_0;
bde18a2e
KI
535
536 if ((dma_addr = ioremap(dma_base, dma_size)) == NULL)
0d1bad21 537 goto fail_1;
bde18a2e
KI
538
539 pci_set_master(dev);
540 scc_ports[i].ctl = (unsigned long)ctl_addr;
541 scc_ports[i].dma = (unsigned long)dma_addr;
542 pci_set_drvdata(dev, (void *) &scc_ports[i]);
543
544 return 1;
545
bde18a2e 546 fail_1:
0d1bad21 547 iounmap(ctl_addr);
bde18a2e
KI
548 fail_0:
549 return -ENOMEM;
550}
551
3d53ba87
AI
552static int scc_ide_setup_pci_device(struct pci_dev *dev,
553 const struct ide_port_info *d)
554{
555 struct scc_ports *ports = pci_get_drvdata(dev);
556 ide_hwif_t *hwif = NULL;
c97c6aca 557 hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
3d53ba87
AI
558 u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
559 int i;
560
eb3aff55
BZ
561 hwif = ide_find_port_slot(d);
562 if (hwif == NULL)
3d53ba87 563 return -ENOMEM;
3d53ba87
AI
564
565 memset(&hw, 0, sizeof(hw));
4c3032d8
BZ
566 for (i = 0; i <= 8; i++)
567 hw.io_ports_array[i] = ports->dma + 0x20 + i * 4;
3d53ba87
AI
568 hw.irq = dev->irq;
569 hw.dev = &dev->dev;
570 hw.chipset = ide_pci;
3d53ba87
AI
571
572 idx[0] = hwif->index;
573
c97c6aca 574 ide_device_add(idx, d, hws);
3d53ba87
AI
575
576 return 0;
577}
578
bde18a2e
KI
579/**
580 * init_setup_scc - set up an SCC PATA Controller
581 * @dev: PCI device
039788e1 582 * @d: IDE port info
bde18a2e
KI
583 *
584 * Perform the initial set up for this device.
585 */
586
039788e1 587static int __devinit init_setup_scc(struct pci_dev *dev,
85620436 588 const struct ide_port_info *d)
bde18a2e
KI
589{
590 unsigned long ctl_base;
591 unsigned long dma_base;
592 unsigned long cckctrl_port;
593 unsigned long intmask_port;
594 unsigned long mode_port;
595 unsigned long ecmode_port;
596 unsigned long dma_status_port;
597 u32 reg = 0;
598 struct scc_ports *ports;
599 int rc;
600
3d53ba87
AI
601 rc = pci_enable_device(dev);
602 if (rc)
603 goto end;
604
bde18a2e 605 rc = setup_mmio_scc(dev, d->name);
3d53ba87
AI
606 if (rc < 0)
607 goto end;
bde18a2e
KI
608
609 ports = pci_get_drvdata(dev);
610 ctl_base = ports->ctl;
611 dma_base = ports->dma;
612 cckctrl_port = ctl_base + 0xff0;
613 intmask_port = dma_base + 0x010;
614 mode_port = ctl_base + 0x024;
615 ecmode_port = ctl_base + 0xf00;
616 dma_status_port = dma_base + 0x004;
617
618 /* controller initialization */
619 reg = 0;
620 out_be32((void*)cckctrl_port, reg);
621 reg |= CCKCTRL_ATACLKOEN;
622 out_be32((void*)cckctrl_port, reg);
623 reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN;
624 out_be32((void*)cckctrl_port, reg);
625 reg |= CCKCTRL_CRST;
626 out_be32((void*)cckctrl_port, reg);
627
628 for (;;) {
629 reg = in_be32((void*)cckctrl_port);
630 if (reg & CCKCTRL_CRST)
631 break;
632 udelay(5000);
633 }
634
635 reg |= CCKCTRL_ATARESET;
636 out_be32((void*)cckctrl_port, reg);
637
638 out_be32((void*)ecmode_port, ECMODE_VALUE);
639 out_be32((void*)mode_port, MODE_JCUSFEN);
640 out_be32((void*)intmask_port, INTMASK_MSK);
641
3d53ba87
AI
642 rc = scc_ide_setup_pci_device(dev, d);
643
644 end:
645 return rc;
bde18a2e
KI
646}
647
db2432c4
BZ
648static void scc_tf_load(ide_drive_t *drive, ide_task_t *task)
649{
650 struct ide_io_ports *io_ports = &drive->hwif->io_ports;
651 struct ide_taskfile *tf = &task->tf;
652 u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF;
653
654 if (task->tf_flags & IDE_TFLAG_FLAGGED)
655 HIHI = 0xFF;
656
db2432c4 657 if (task->tf_flags & IDE_TFLAG_OUT_DATA)
7c0daf26
BZ
658 out_be32((void *)io_ports->data_addr,
659 (tf->hob_data << 8) | tf->data);
db2432c4
BZ
660
661 if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
662 scc_ide_outb(tf->hob_feature, io_ports->feature_addr);
663 if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
664 scc_ide_outb(tf->hob_nsect, io_ports->nsect_addr);
665 if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
666 scc_ide_outb(tf->hob_lbal, io_ports->lbal_addr);
667 if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
668 scc_ide_outb(tf->hob_lbam, io_ports->lbam_addr);
669 if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
670 scc_ide_outb(tf->hob_lbah, io_ports->lbah_addr);
671
672 if (task->tf_flags & IDE_TFLAG_OUT_FEATURE)
673 scc_ide_outb(tf->feature, io_ports->feature_addr);
674 if (task->tf_flags & IDE_TFLAG_OUT_NSECT)
675 scc_ide_outb(tf->nsect, io_ports->nsect_addr);
676 if (task->tf_flags & IDE_TFLAG_OUT_LBAL)
677 scc_ide_outb(tf->lbal, io_ports->lbal_addr);
678 if (task->tf_flags & IDE_TFLAG_OUT_LBAM)
679 scc_ide_outb(tf->lbam, io_ports->lbam_addr);
680 if (task->tf_flags & IDE_TFLAG_OUT_LBAH)
681 scc_ide_outb(tf->lbah, io_ports->lbah_addr);
682
683 if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
684 scc_ide_outb((tf->device & HIHI) | drive->select.all,
685 io_ports->device_addr);
686}
687
688static void scc_tf_read(ide_drive_t *drive, ide_task_t *task)
689{
690 struct ide_io_ports *io_ports = &drive->hwif->io_ports;
691 struct ide_taskfile *tf = &task->tf;
692
693 if (task->tf_flags & IDE_TFLAG_IN_DATA) {
7c0daf26 694 u16 data = (u16)in_be32((void *)io_ports->data_addr);
db2432c4
BZ
695
696 tf->data = data & 0xff;
697 tf->hob_data = (data >> 8) & 0xff;
698 }
699
700 /* be sure we're looking at the low order bits */
ff074883 701 scc_ide_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr);
db2432c4
BZ
702
703 if (task->tf_flags & IDE_TFLAG_IN_NSECT)
704 tf->nsect = scc_ide_inb(io_ports->nsect_addr);
705 if (task->tf_flags & IDE_TFLAG_IN_LBAL)
706 tf->lbal = scc_ide_inb(io_ports->lbal_addr);
707 if (task->tf_flags & IDE_TFLAG_IN_LBAM)
708 tf->lbam = scc_ide_inb(io_ports->lbam_addr);
709 if (task->tf_flags & IDE_TFLAG_IN_LBAH)
710 tf->lbah = scc_ide_inb(io_ports->lbah_addr);
711 if (task->tf_flags & IDE_TFLAG_IN_DEVICE)
712 tf->device = scc_ide_inb(io_ports->device_addr);
713
714 if (task->tf_flags & IDE_TFLAG_LBA48) {
ff074883 715 scc_ide_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr);
db2432c4
BZ
716
717 if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
718 tf->hob_feature = scc_ide_inb(io_ports->feature_addr);
719 if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
720 tf->hob_nsect = scc_ide_inb(io_ports->nsect_addr);
721 if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
722 tf->hob_lbal = scc_ide_inb(io_ports->lbal_addr);
723 if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
724 tf->hob_lbam = scc_ide_inb(io_ports->lbam_addr);
725 if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
726 tf->hob_lbah = scc_ide_inb(io_ports->lbah_addr);
727 }
728}
729
efa3db1b
BZ
730static void scc_input_data(ide_drive_t *drive, struct request *rq,
731 void *buf, unsigned int len)
732{
733 unsigned long data_addr = drive->hwif->io_ports.data_addr;
734
735 len++;
736
737 if (drive->io_32bit) {
738 scc_ide_insl(data_addr, buf, len / 4);
739
740 if ((len & 3) >= 2)
741 scc_ide_insw(data_addr, (u8 *)buf + (len & ~3), 1);
742 } else
743 scc_ide_insw(data_addr, buf, len / 2);
744}
745
746static void scc_output_data(ide_drive_t *drive, struct request *rq,
747 void *buf, unsigned int len)
748{
749 unsigned long data_addr = drive->hwif->io_ports.data_addr;
750
751 len++;
752
753 if (drive->io_32bit) {
754 scc_ide_outsl(data_addr, buf, len / 4);
755
756 if ((len & 3) >= 2)
757 scc_ide_outsw(data_addr, (u8 *)buf + (len & ~3), 1);
758 } else
759 scc_ide_outsw(data_addr, buf, len / 2);
760}
761
bde18a2e
KI
762/**
763 * init_mmio_iops_scc - set up the iops for MMIO
764 * @hwif: interface to set up
765 *
766 */
767
768static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
769{
36501650 770 struct pci_dev *dev = to_pci_dev(hwif->dev);
bde18a2e
KI
771 struct scc_ports *ports = pci_get_drvdata(dev);
772 unsigned long dma_base = ports->dma;
773
774 ide_set_hwifdata(hwif, ports);
775
db2432c4
BZ
776 hwif->tf_load = scc_tf_load;
777 hwif->tf_read = scc_tf_read;
778
efa3db1b
BZ
779 hwif->input_data = scc_input_data;
780 hwif->output_data = scc_output_data;
781
bde18a2e 782 hwif->INB = scc_ide_inb;
bde18a2e
KI
783 hwif->OUTB = scc_ide_outb;
784 hwif->OUTBSYNC = scc_ide_outbsync;
bde18a2e 785
bde18a2e
KI
786 hwif->dma_base = dma_base;
787 hwif->config_data = ports->ctl;
bde18a2e
KI
788}
789
790/**
791 * init_iops_scc - set up iops
792 * @hwif: interface to set up
793 *
794 * Do the basic setup for the SCC hardware interface
795 * and then do the MMIO setup.
796 */
797
798static void __devinit init_iops_scc(ide_hwif_t *hwif)
799{
36501650
BZ
800 struct pci_dev *dev = to_pci_dev(hwif->dev);
801
bde18a2e
KI
802 hwif->hwif_data = NULL;
803 if (pci_get_drvdata(dev) == NULL)
804 return;
805 init_mmio_iops_scc(hwif);
806}
807
b4d1c73d
BZ
808static u8 __devinit scc_cable_detect(ide_hwif_t *hwif)
809{
810 return ATA_CBL_PATA80;
811}
812
bde18a2e
KI
813/**
814 * init_hwif_scc - set up hwif
815 * @hwif: interface to set up
816 *
817 * We do the basic set up of the interface structure. The SCC
818 * requires several custom handlers so we override the default
819 * ide DMA handlers appropriately.
820 */
821
822static void __devinit init_hwif_scc(ide_hwif_t *hwif)
823{
824 struct scc_ports *ports = ide_get_hwifdata(hwif);
825
589b0626 826 ports->hwif = hwif;
bde18a2e
KI
827
828 hwif->dma_command = hwif->dma_base;
829 hwif->dma_status = hwif->dma_base + 0x04;
bde18a2e 830
0ecdca26
BZ
831 /* PTERADD */
832 out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma);
bde18a2e 833
5f8b6c34
BZ
834 if (in_be32((void __iomem *)(hwif->config_data + 0xff0)) & CCKCTRL_ATACLKOEN)
835 hwif->ultra_mask = ATA_UDMA6; /* 133MHz */
836 else
837 hwif->ultra_mask = ATA_UDMA5; /* 100MHz */
bde18a2e
KI
838}
839
ac95beed
BZ
840static const struct ide_port_ops scc_port_ops = {
841 .set_pio_mode = scc_set_pio_mode,
842 .set_dma_mode = scc_set_dma_mode,
843 .udma_filter = scc_udma_filter,
844 .cable_detect = scc_cable_detect,
845};
846
f37afdac 847static const struct ide_dma_ops scc_dma_ops = {
669185e9 848 .dma_host_set = scc_dma_host_set,
5e37bdc0 849 .dma_setup = scc_dma_setup,
f37afdac 850 .dma_exec_cmd = ide_dma_exec_cmd,
669185e9 851 .dma_start = scc_dma_start,
5e37bdc0
BZ
852 .dma_end = scc_dma_end,
853 .dma_test_irq = scc_dma_test_irq,
f37afdac
BZ
854 .dma_lost_irq = ide_dma_lost_irq,
855 .dma_timeout = ide_dma_timeout,
5e37bdc0
BZ
856};
857
bde18a2e
KI
858#define DECLARE_SCC_DEV(name_str) \
859 { \
860 .name = name_str, \
bde18a2e
KI
861 .init_iops = init_iops_scc, \
862 .init_hwif = init_hwif_scc, \
ac95beed 863 .port_ops = &scc_port_ops, \
5e37bdc0 864 .dma_ops = &scc_dma_ops, \
5e71d9c5 865 .host_flags = IDE_HFLAG_SINGLE, \
4099d143 866 .pio_mask = ATA_PIO4, \
bde18a2e
KI
867 }
868
85620436 869static const struct ide_port_info scc_chipsets[] __devinitdata = {
bde18a2e
KI
870 /* 0 */ DECLARE_SCC_DEV("sccIDE"),
871};
872
873/**
874 * scc_init_one - pci layer discovery entry
875 * @dev: PCI device
876 * @id: ident table entry
877 *
878 * Called by the PCI code when it finds an SCC PATA controller.
879 * We then use the IDE PCI generic helper to do most of the work.
880 */
881
882static int __devinit scc_init_one(struct pci_dev *dev, const struct pci_device_id *id)
883{
039788e1 884 return init_setup_scc(dev, &scc_chipsets[id->driver_data]);
bde18a2e
KI
885}
886
887/**
888 * scc_remove - pci layer remove entry
889 * @dev: PCI device
890 *
891 * Called by the PCI code when it removes an SCC PATA controller.
892 */
893
894static void __devexit scc_remove(struct pci_dev *dev)
895{
896 struct scc_ports *ports = pci_get_drvdata(dev);
589b0626 897 ide_hwif_t *hwif = ports->hwif;
bde18a2e
KI
898
899 if (hwif->dmatable_cpu) {
36501650
BZ
900 pci_free_consistent(dev, PRD_ENTRIES * PRD_BYTES,
901 hwif->dmatable_cpu, hwif->dmatable_dma);
bde18a2e
KI
902 hwif->dmatable_cpu = NULL;
903 }
904
387750c3 905 ide_unregister(hwif);
bde18a2e 906
bde18a2e
KI
907 iounmap((void*)ports->dma);
908 iounmap((void*)ports->ctl);
0d1bad21 909 pci_release_selected_regions(dev, (1 << 2) - 1);
bde18a2e
KI
910 memset(ports, 0, sizeof(*ports));
911}
912
9cbcc5e3
BZ
913static const struct pci_device_id scc_pci_tbl[] = {
914 { PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0 },
bde18a2e
KI
915 { 0, },
916};
917MODULE_DEVICE_TABLE(pci, scc_pci_tbl);
918
919static struct pci_driver driver = {
920 .name = "SCC IDE",
921 .id_table = scc_pci_tbl,
922 .probe = scc_init_one,
923 .remove = scc_remove,
924};
925
926static int scc_ide_init(void)
927{
928 return ide_pci_register_driver(&driver);
929}
930
931module_init(scc_ide_init);
932/* -- No exit code?
933static void scc_ide_exit(void)
934{
935 ide_pci_unregister_driver(&driver);
936}
937module_exit(scc_ide_exit);
938 */
939
940
941MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE");
942MODULE_LICENSE("GPL");