]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * sbp2.c - SBP-2 protocol driver for IEEE-1394 | |
3 | * | |
4 | * Copyright (C) 2000 James Goodwin, Filanet Corporation (www.filanet.com) | |
5 | * jamesg@filanet.com (JSG) | |
6 | * | |
7 | * Copyright (C) 2003 Ben Collins <bcollins@debian.org> | |
8 | * | |
9 | * This program is free software; you can redistribute it and/or modify | |
10 | * it under the terms of the GNU General Public License as published by | |
11 | * the Free Software Foundation; either version 2 of the License, or | |
12 | * (at your option) any later version. | |
13 | * | |
14 | * This program is distributed in the hope that it will be useful, | |
15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
17 | * GNU General Public License for more details. | |
18 | * | |
19 | * You should have received a copy of the GNU General Public License | |
20 | * along with this program; if not, write to the Free Software Foundation, | |
21 | * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | |
22 | */ | |
23 | ||
24 | /* | |
25 | * Brief Description: | |
26 | * | |
27 | * This driver implements the Serial Bus Protocol 2 (SBP-2) over IEEE-1394 | |
28 | * under Linux. The SBP-2 driver is implemented as an IEEE-1394 high-level | |
29 | * driver. It also registers as a SCSI lower-level driver in order to accept | |
30 | * SCSI commands for transport using SBP-2. | |
31 | * | |
32 | * You may access any attached SBP-2 storage devices as if they were SCSI | |
33 | * devices (e.g. mount /dev/sda1, fdisk, mkfs, etc.). | |
34 | * | |
35 | * Current Issues: | |
36 | * | |
37 | * - Error Handling: SCSI aborts and bus reset requests are handled somewhat | |
38 | * but the code needs additional debugging. | |
39 | */ | |
40 | ||
41 | #include <linux/config.h> | |
42 | #include <linux/kernel.h> | |
43 | #include <linux/list.h> | |
44 | #include <linux/string.h> | |
45 | #include <linux/slab.h> | |
46 | #include <linux/interrupt.h> | |
47 | #include <linux/fs.h> | |
48 | #include <linux/poll.h> | |
49 | #include <linux/module.h> | |
50 | #include <linux/moduleparam.h> | |
51 | #include <linux/types.h> | |
52 | #include <linux/delay.h> | |
53 | #include <linux/sched.h> | |
54 | #include <linux/blkdev.h> | |
55 | #include <linux/smp_lock.h> | |
56 | #include <linux/init.h> | |
57 | #include <linux/pci.h> | |
58 | ||
59 | #include <asm/current.h> | |
60 | #include <asm/uaccess.h> | |
61 | #include <asm/io.h> | |
62 | #include <asm/byteorder.h> | |
63 | #include <asm/atomic.h> | |
64 | #include <asm/system.h> | |
65 | #include <asm/scatterlist.h> | |
66 | ||
67 | #include <scsi/scsi.h> | |
68 | #include <scsi/scsi_cmnd.h> | |
69 | #include <scsi/scsi_dbg.h> | |
70 | #include <scsi/scsi_device.h> | |
71 | #include <scsi/scsi_host.h> | |
72 | ||
73 | #include "csr1212.h" | |
74 | #include "ieee1394.h" | |
75 | #include "ieee1394_types.h" | |
76 | #include "ieee1394_core.h" | |
77 | #include "nodemgr.h" | |
78 | #include "hosts.h" | |
79 | #include "highlevel.h" | |
80 | #include "ieee1394_transactions.h" | |
81 | #include "sbp2.h" | |
82 | ||
83 | static char version[] __devinitdata = | |
1934b8b6 | 84 | "$Rev: 1306 $ Ben Collins <bcollins@debian.org>"; |
1da177e4 LT |
85 | |
86 | /* | |
87 | * Module load parameter definitions | |
88 | */ | |
89 | ||
90 | /* | |
91 | * Change max_speed on module load if you have a bad IEEE-1394 | |
92 | * controller that has trouble running 2KB packets at 400mb. | |
93 | * | |
94 | * NOTE: On certain OHCI parts I have seen short packets on async transmit | |
95 | * (probably due to PCI latency/throughput issues with the part). You can | |
96 | * bump down the speed if you are running into problems. | |
97 | */ | |
98 | static int max_speed = IEEE1394_SPEED_MAX; | |
99 | module_param(max_speed, int, 0644); | |
2bab359a | 100 | MODULE_PARM_DESC(max_speed, "Force max speed (3 = 800mb, 2 = 400mb, 1 = 200mb, 0 = 100mb)"); |
1da177e4 LT |
101 | |
102 | /* | |
103 | * Set serialize_io to 1 if you'd like only one scsi command sent | |
104 | * down to us at a time (debugging). This might be necessary for very | |
105 | * badly behaved sbp2 devices. | |
2bab359a JM |
106 | * |
107 | * TODO: Make this configurable per device. | |
1da177e4 | 108 | */ |
2bab359a | 109 | static int serialize_io = 1; |
1da177e4 | 110 | module_param(serialize_io, int, 0444); |
2bab359a | 111 | MODULE_PARM_DESC(serialize_io, "Serialize I/O coming from scsi drivers (default = 1, faster = 0)"); |
1da177e4 LT |
112 | |
113 | /* | |
114 | * Bump up max_sectors if you'd like to support very large sized | |
115 | * transfers. Please note that some older sbp2 bridge chips are broken for | |
116 | * transfers greater or equal to 128KB. Default is a value of 255 | |
117 | * sectors, or just under 128KB (at 512 byte sector size). I can note that | |
118 | * the Oxsemi sbp2 chipsets have no problems supporting very large | |
119 | * transfer sizes. | |
120 | */ | |
121 | static int max_sectors = SBP2_MAX_SECTORS; | |
122 | module_param(max_sectors, int, 0444); | |
123 | MODULE_PARM_DESC(max_sectors, "Change max sectors per I/O supported (default = 255)"); | |
124 | ||
125 | /* | |
126 | * Exclusive login to sbp2 device? In most cases, the sbp2 driver should | |
127 | * do an exclusive login, as it's generally unsafe to have two hosts | |
128 | * talking to a single sbp2 device at the same time (filesystem coherency, | |
129 | * etc.). If you're running an sbp2 device that supports multiple logins, | |
130 | * and you're either running read-only filesystems or some sort of special | |
131 | * filesystem supporting multiple hosts (one such filesystem is OpenGFS, | |
132 | * see opengfs.sourceforge.net for more info), then set exclusive_login | |
133 | * to zero. Note: The Oxsemi OXFW911 sbp2 chipset supports up to four | |
134 | * concurrent logins. | |
135 | */ | |
136 | static int exclusive_login = 1; | |
137 | module_param(exclusive_login, int, 0644); | |
138 | MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device (default = 1)"); | |
139 | ||
140 | /* | |
141 | * SCSI inquiry hack for really badly behaved sbp2 devices. Turn this on | |
142 | * if your sbp2 device is not properly handling the SCSI inquiry command. | |
143 | * This hack makes the inquiry look more like a typical MS Windows | |
144 | * inquiry. | |
145 | * | |
146 | * If force_inquiry_hack=1 is required for your device to work, | |
147 | * please submit the logged sbp2_firmware_revision value of this device to | |
148 | * the linux1394-devel mailing list. | |
149 | */ | |
1934b8b6 | 150 | static int force_inquiry_hack; |
1da177e4 LT |
151 | module_param(force_inquiry_hack, int, 0444); |
152 | MODULE_PARM_DESC(force_inquiry_hack, "Force SCSI inquiry hack (default = 0)"); | |
153 | ||
154 | ||
155 | /* | |
156 | * Export information about protocols/devices supported by this driver. | |
157 | */ | |
158 | static struct ieee1394_device_id sbp2_id_table[] = { | |
159 | { | |
160 | .match_flags =IEEE1394_MATCH_SPECIFIER_ID | | |
161 | IEEE1394_MATCH_VERSION, | |
162 | .specifier_id = SBP2_UNIT_SPEC_ID_ENTRY & 0xffffff, | |
163 | .version = SBP2_SW_VERSION_ENTRY & 0xffffff | |
164 | }, | |
165 | { } | |
166 | }; | |
167 | ||
168 | MODULE_DEVICE_TABLE(ieee1394, sbp2_id_table); | |
169 | ||
170 | /* | |
171 | * Debug levels, configured via kernel config, or enable here. | |
172 | */ | |
173 | ||
44456d37 | 174 | #define CONFIG_IEEE1394_SBP2_DEBUG 0 |
1da177e4 LT |
175 | /* #define CONFIG_IEEE1394_SBP2_DEBUG_ORBS */ |
176 | /* #define CONFIG_IEEE1394_SBP2_DEBUG_DMA */ | |
177 | /* #define CONFIG_IEEE1394_SBP2_DEBUG 1 */ | |
178 | /* #define CONFIG_IEEE1394_SBP2_DEBUG 2 */ | |
179 | /* #define CONFIG_IEEE1394_SBP2_PACKET_DUMP */ | |
180 | ||
181 | #ifdef CONFIG_IEEE1394_SBP2_DEBUG_ORBS | |
182 | #define SBP2_ORB_DEBUG(fmt, args...) HPSB_ERR("sbp2(%s): "fmt, __FUNCTION__, ## args) | |
183 | static u32 global_outstanding_command_orbs = 0; | |
184 | #define outstanding_orb_incr global_outstanding_command_orbs++ | |
185 | #define outstanding_orb_decr global_outstanding_command_orbs-- | |
186 | #else | |
187 | #define SBP2_ORB_DEBUG(fmt, args...) | |
188 | #define outstanding_orb_incr | |
189 | #define outstanding_orb_decr | |
190 | #endif | |
191 | ||
192 | #ifdef CONFIG_IEEE1394_SBP2_DEBUG_DMA | |
193 | #define SBP2_DMA_ALLOC(fmt, args...) \ | |
194 | HPSB_ERR("sbp2(%s)alloc(%d): "fmt, __FUNCTION__, \ | |
195 | ++global_outstanding_dmas, ## args) | |
196 | #define SBP2_DMA_FREE(fmt, args...) \ | |
197 | HPSB_ERR("sbp2(%s)free(%d): "fmt, __FUNCTION__, \ | |
198 | --global_outstanding_dmas, ## args) | |
199 | static u32 global_outstanding_dmas = 0; | |
200 | #else | |
201 | #define SBP2_DMA_ALLOC(fmt, args...) | |
202 | #define SBP2_DMA_FREE(fmt, args...) | |
203 | #endif | |
204 | ||
205 | #if CONFIG_IEEE1394_SBP2_DEBUG >= 2 | |
206 | #define SBP2_DEBUG(fmt, args...) HPSB_ERR("sbp2: "fmt, ## args) | |
207 | #define SBP2_INFO(fmt, args...) HPSB_ERR("sbp2: "fmt, ## args) | |
208 | #define SBP2_NOTICE(fmt, args...) HPSB_ERR("sbp2: "fmt, ## args) | |
209 | #define SBP2_WARN(fmt, args...) HPSB_ERR("sbp2: "fmt, ## args) | |
210 | #elif CONFIG_IEEE1394_SBP2_DEBUG == 1 | |
211 | #define SBP2_DEBUG(fmt, args...) HPSB_DEBUG("sbp2: "fmt, ## args) | |
212 | #define SBP2_INFO(fmt, args...) HPSB_INFO("sbp2: "fmt, ## args) | |
213 | #define SBP2_NOTICE(fmt, args...) HPSB_NOTICE("sbp2: "fmt, ## args) | |
214 | #define SBP2_WARN(fmt, args...) HPSB_WARN("sbp2: "fmt, ## args) | |
215 | #else | |
216 | #define SBP2_DEBUG(fmt, args...) | |
217 | #define SBP2_INFO(fmt, args...) HPSB_INFO("sbp2: "fmt, ## args) | |
218 | #define SBP2_NOTICE(fmt, args...) HPSB_NOTICE("sbp2: "fmt, ## args) | |
219 | #define SBP2_WARN(fmt, args...) HPSB_WARN("sbp2: "fmt, ## args) | |
220 | #endif | |
221 | ||
222 | #define SBP2_ERR(fmt, args...) HPSB_ERR("sbp2: "fmt, ## args) | |
223 | ||
224 | ||
225 | /* | |
226 | * Globals | |
227 | */ | |
228 | ||
229 | static void sbp2scsi_complete_all_commands(struct scsi_id_instance_data *scsi_id, | |
230 | u32 status); | |
231 | ||
232 | static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id, | |
233 | u32 scsi_status, struct scsi_cmnd *SCpnt, | |
234 | void (*done)(struct scsi_cmnd *)); | |
235 | ||
236 | static struct scsi_host_template scsi_driver_template; | |
237 | ||
238 | static const u8 sbp2_speedto_max_payload[] = { 0x7, 0x8, 0x9, 0xA, 0xB, 0xC }; | |
239 | ||
240 | static void sbp2_host_reset(struct hpsb_host *host); | |
241 | ||
242 | static int sbp2_probe(struct device *dev); | |
243 | static int sbp2_remove(struct device *dev); | |
244 | static int sbp2_update(struct unit_directory *ud); | |
245 | ||
246 | static struct hpsb_highlevel sbp2_highlevel = { | |
247 | .name = SBP2_DEVICE_NAME, | |
248 | .host_reset = sbp2_host_reset, | |
249 | }; | |
250 | ||
251 | static struct hpsb_address_ops sbp2_ops = { | |
252 | .write = sbp2_handle_status_write | |
253 | }; | |
254 | ||
255 | #ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA | |
256 | static struct hpsb_address_ops sbp2_physdma_ops = { | |
257 | .read = sbp2_handle_physdma_read, | |
258 | .write = sbp2_handle_physdma_write, | |
259 | }; | |
260 | #endif | |
261 | ||
262 | static struct hpsb_protocol_driver sbp2_driver = { | |
263 | .name = "SBP2 Driver", | |
264 | .id_table = sbp2_id_table, | |
265 | .update = sbp2_update, | |
266 | .driver = { | |
267 | .name = SBP2_DEVICE_NAME, | |
268 | .bus = &ieee1394_bus_type, | |
269 | .probe = sbp2_probe, | |
270 | .remove = sbp2_remove, | |
271 | }, | |
272 | }; | |
273 | ||
274 | ||
275 | /* List of device firmware's that require a forced 36 byte inquiry. */ | |
276 | static u32 sbp2_broken_inquiry_list[] = { | |
277 | 0x00002800, /* Stefan Richter <richtest@bauwesen.tu-cottbus.de> */ | |
278 | /* DViCO Momobay CX-1 */ | |
279 | 0x00000200 /* Andreas Plesch <plesch@fas.harvard.edu> */ | |
280 | /* QPS Fire DVDBurner */ | |
281 | }; | |
282 | ||
283 | #define NUM_BROKEN_INQUIRY_DEVS \ | |
284 | (sizeof(sbp2_broken_inquiry_list)/sizeof(*sbp2_broken_inquiry_list)) | |
285 | ||
286 | /************************************** | |
287 | * General utility functions | |
288 | **************************************/ | |
289 | ||
290 | ||
291 | #ifndef __BIG_ENDIAN | |
292 | /* | |
293 | * Converts a buffer from be32 to cpu byte ordering. Length is in bytes. | |
294 | */ | |
295 | static __inline__ void sbp2util_be32_to_cpu_buffer(void *buffer, int length) | |
296 | { | |
297 | u32 *temp = buffer; | |
298 | ||
299 | for (length = (length >> 2); length--; ) | |
300 | temp[length] = be32_to_cpu(temp[length]); | |
301 | ||
302 | return; | |
303 | } | |
304 | ||
305 | /* | |
306 | * Converts a buffer from cpu to be32 byte ordering. Length is in bytes. | |
307 | */ | |
308 | static __inline__ void sbp2util_cpu_to_be32_buffer(void *buffer, int length) | |
309 | { | |
310 | u32 *temp = buffer; | |
311 | ||
312 | for (length = (length >> 2); length--; ) | |
313 | temp[length] = cpu_to_be32(temp[length]); | |
314 | ||
315 | return; | |
316 | } | |
317 | #else /* BIG_ENDIAN */ | |
318 | /* Why waste the cpu cycles? */ | |
319 | #define sbp2util_be32_to_cpu_buffer(x,y) | |
320 | #define sbp2util_cpu_to_be32_buffer(x,y) | |
321 | #endif | |
322 | ||
323 | #ifdef CONFIG_IEEE1394_SBP2_PACKET_DUMP | |
324 | /* | |
325 | * Debug packet dump routine. Length is in bytes. | |
326 | */ | |
327 | static void sbp2util_packet_dump(void *buffer, int length, char *dump_name, u32 dump_phys_addr) | |
328 | { | |
329 | int i; | |
330 | unsigned char *dump = buffer; | |
331 | ||
332 | if (!dump || !length || !dump_name) | |
333 | return; | |
334 | ||
335 | if (dump_phys_addr) | |
336 | printk("[%s, 0x%x]", dump_name, dump_phys_addr); | |
337 | else | |
338 | printk("[%s]", dump_name); | |
339 | for (i = 0; i < length; i++) { | |
340 | if (i > 0x3f) { | |
341 | printk("\n ..."); | |
342 | break; | |
343 | } | |
344 | if ((i & 0x3) == 0) | |
345 | printk(" "); | |
346 | if ((i & 0xf) == 0) | |
347 | printk("\n "); | |
348 | printk("%02x ", (int) dump[i]); | |
349 | } | |
350 | printk("\n"); | |
351 | ||
352 | return; | |
353 | } | |
354 | #else | |
355 | #define sbp2util_packet_dump(w,x,y,z) | |
356 | #endif | |
357 | ||
358 | /* | |
359 | * Goofy routine that basically does a down_timeout function. | |
360 | */ | |
361 | static int sbp2util_down_timeout(atomic_t *done, int timeout) | |
362 | { | |
363 | int i; | |
364 | ||
365 | for (i = timeout; (i > 0 && atomic_read(done) == 0); i-= HZ/10) { | |
366 | if (msleep_interruptible(100)) /* 100ms */ | |
367 | return(1); | |
368 | } | |
369 | return ((i > 0) ? 0:1); | |
370 | } | |
371 | ||
372 | /* Free's an allocated packet */ | |
373 | static void sbp2_free_packet(struct hpsb_packet *packet) | |
374 | { | |
375 | hpsb_free_tlabel(packet); | |
376 | hpsb_free_packet(packet); | |
377 | } | |
378 | ||
379 | /* This is much like hpsb_node_write(), except it ignores the response | |
380 | * subaction and returns immediately. Can be used from interrupts. | |
381 | */ | |
382 | static int sbp2util_node_write_no_wait(struct node_entry *ne, u64 addr, | |
383 | quadlet_t *buffer, size_t length) | |
384 | { | |
385 | struct hpsb_packet *packet; | |
386 | ||
387 | packet = hpsb_make_writepacket(ne->host, ne->nodeid, | |
388 | addr, buffer, length); | |
389 | if (!packet) | |
390 | return -ENOMEM; | |
391 | ||
392 | hpsb_set_packet_complete_task(packet, (void (*)(void*))sbp2_free_packet, | |
393 | packet); | |
394 | ||
395 | hpsb_node_fill_packet(ne, packet); | |
396 | ||
397 | if (hpsb_send_packet(packet) < 0) { | |
398 | sbp2_free_packet(packet); | |
399 | return -EIO; | |
400 | } | |
401 | ||
402 | return 0; | |
403 | } | |
404 | ||
405 | /* | |
406 | * This function is called to create a pool of command orbs used for | |
407 | * command processing. It is called when a new sbp2 device is detected. | |
408 | */ | |
409 | static int sbp2util_create_command_orb_pool(struct scsi_id_instance_data *scsi_id) | |
410 | { | |
411 | struct sbp2scsi_host_info *hi = scsi_id->hi; | |
412 | int i; | |
413 | unsigned long flags, orbs; | |
414 | struct sbp2_command_info *command; | |
415 | ||
416 | orbs = serialize_io ? 2 : SBP2_MAX_CMDS; | |
417 | ||
418 | spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags); | |
419 | for (i = 0; i < orbs; i++) { | |
420 | command = (struct sbp2_command_info *) | |
421 | kmalloc(sizeof(struct sbp2_command_info), GFP_ATOMIC); | |
422 | if (!command) { | |
423 | spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags); | |
424 | return(-ENOMEM); | |
425 | } | |
426 | memset(command, '\0', sizeof(struct sbp2_command_info)); | |
427 | command->command_orb_dma = | |
428 | pci_map_single (hi->host->pdev, &command->command_orb, | |
429 | sizeof(struct sbp2_command_orb), | |
430 | PCI_DMA_BIDIRECTIONAL); | |
431 | SBP2_DMA_ALLOC("single command orb DMA"); | |
432 | command->sge_dma = | |
433 | pci_map_single (hi->host->pdev, &command->scatter_gather_element, | |
434 | sizeof(command->scatter_gather_element), | |
435 | PCI_DMA_BIDIRECTIONAL); | |
436 | SBP2_DMA_ALLOC("scatter_gather_element"); | |
437 | INIT_LIST_HEAD(&command->list); | |
438 | list_add_tail(&command->list, &scsi_id->sbp2_command_orb_completed); | |
439 | } | |
440 | spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags); | |
441 | return 0; | |
442 | } | |
443 | ||
444 | /* | |
445 | * This function is called to delete a pool of command orbs. | |
446 | */ | |
447 | static void sbp2util_remove_command_orb_pool(struct scsi_id_instance_data *scsi_id) | |
448 | { | |
449 | struct hpsb_host *host = scsi_id->hi->host; | |
450 | struct list_head *lh, *next; | |
451 | struct sbp2_command_info *command; | |
452 | unsigned long flags; | |
453 | ||
454 | spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags); | |
455 | if (!list_empty(&scsi_id->sbp2_command_orb_completed)) { | |
456 | list_for_each_safe(lh, next, &scsi_id->sbp2_command_orb_completed) { | |
457 | command = list_entry(lh, struct sbp2_command_info, list); | |
458 | ||
459 | /* Release our generic DMA's */ | |
460 | pci_unmap_single(host->pdev, command->command_orb_dma, | |
461 | sizeof(struct sbp2_command_orb), | |
462 | PCI_DMA_BIDIRECTIONAL); | |
463 | SBP2_DMA_FREE("single command orb DMA"); | |
464 | pci_unmap_single(host->pdev, command->sge_dma, | |
465 | sizeof(command->scatter_gather_element), | |
466 | PCI_DMA_BIDIRECTIONAL); | |
467 | SBP2_DMA_FREE("scatter_gather_element"); | |
468 | ||
469 | kfree(command); | |
470 | } | |
471 | } | |
472 | spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags); | |
473 | return; | |
474 | } | |
475 | ||
476 | /* | |
477 | * This function finds the sbp2_command for a given outstanding command | |
478 | * orb.Only looks at the inuse list. | |
479 | */ | |
480 | static struct sbp2_command_info *sbp2util_find_command_for_orb( | |
481 | struct scsi_id_instance_data *scsi_id, dma_addr_t orb) | |
482 | { | |
483 | struct sbp2_command_info *command; | |
484 | unsigned long flags; | |
485 | ||
486 | spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags); | |
487 | if (!list_empty(&scsi_id->sbp2_command_orb_inuse)) { | |
488 | list_for_each_entry(command, &scsi_id->sbp2_command_orb_inuse, list) { | |
489 | if (command->command_orb_dma == orb) { | |
490 | spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags); | |
491 | return (command); | |
492 | } | |
493 | } | |
494 | } | |
495 | spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags); | |
496 | ||
497 | SBP2_ORB_DEBUG("could not match command orb %x", (unsigned int)orb); | |
498 | ||
499 | return(NULL); | |
500 | } | |
501 | ||
502 | /* | |
503 | * This function finds the sbp2_command for a given outstanding SCpnt. | |
504 | * Only looks at the inuse list. | |
505 | */ | |
506 | static struct sbp2_command_info *sbp2util_find_command_for_SCpnt(struct scsi_id_instance_data *scsi_id, void *SCpnt) | |
507 | { | |
508 | struct sbp2_command_info *command; | |
509 | unsigned long flags; | |
510 | ||
511 | spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags); | |
512 | if (!list_empty(&scsi_id->sbp2_command_orb_inuse)) { | |
513 | list_for_each_entry(command, &scsi_id->sbp2_command_orb_inuse, list) { | |
514 | if (command->Current_SCpnt == SCpnt) { | |
515 | spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags); | |
516 | return (command); | |
517 | } | |
518 | } | |
519 | } | |
520 | spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags); | |
521 | return(NULL); | |
522 | } | |
523 | ||
524 | /* | |
525 | * This function allocates a command orb used to send a scsi command. | |
526 | */ | |
527 | static struct sbp2_command_info *sbp2util_allocate_command_orb( | |
528 | struct scsi_id_instance_data *scsi_id, | |
529 | struct scsi_cmnd *Current_SCpnt, | |
530 | void (*Current_done)(struct scsi_cmnd *)) | |
531 | { | |
532 | struct list_head *lh; | |
533 | struct sbp2_command_info *command = NULL; | |
534 | unsigned long flags; | |
535 | ||
536 | spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags); | |
537 | if (!list_empty(&scsi_id->sbp2_command_orb_completed)) { | |
538 | lh = scsi_id->sbp2_command_orb_completed.next; | |
539 | list_del(lh); | |
540 | command = list_entry(lh, struct sbp2_command_info, list); | |
541 | command->Current_done = Current_done; | |
542 | command->Current_SCpnt = Current_SCpnt; | |
543 | list_add_tail(&command->list, &scsi_id->sbp2_command_orb_inuse); | |
544 | } else { | |
545 | SBP2_ERR("sbp2util_allocate_command_orb - No orbs available!"); | |
546 | } | |
547 | spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags); | |
548 | return (command); | |
549 | } | |
550 | ||
551 | /* Free our DMA's */ | |
552 | static void sbp2util_free_command_dma(struct sbp2_command_info *command) | |
553 | { | |
554 | struct scsi_id_instance_data *scsi_id = | |
555 | (struct scsi_id_instance_data *)command->Current_SCpnt->device->host->hostdata[0]; | |
556 | struct hpsb_host *host; | |
557 | ||
558 | if (!scsi_id) { | |
559 | printk(KERN_ERR "%s: scsi_id == NULL\n", __FUNCTION__); | |
560 | return; | |
561 | } | |
562 | ||
563 | host = scsi_id->ud->ne->host; | |
564 | ||
565 | if (command->cmd_dma) { | |
566 | if (command->dma_type == CMD_DMA_SINGLE) { | |
567 | pci_unmap_single(host->pdev, command->cmd_dma, | |
568 | command->dma_size, command->dma_dir); | |
569 | SBP2_DMA_FREE("single bulk"); | |
570 | } else if (command->dma_type == CMD_DMA_PAGE) { | |
571 | pci_unmap_page(host->pdev, command->cmd_dma, | |
572 | command->dma_size, command->dma_dir); | |
573 | SBP2_DMA_FREE("single page"); | |
574 | } /* XXX: Check for CMD_DMA_NONE bug */ | |
575 | command->dma_type = CMD_DMA_NONE; | |
576 | command->cmd_dma = 0; | |
577 | } | |
578 | ||
579 | if (command->sge_buffer) { | |
580 | pci_unmap_sg(host->pdev, command->sge_buffer, | |
581 | command->dma_size, command->dma_dir); | |
582 | SBP2_DMA_FREE("scatter list"); | |
583 | command->sge_buffer = NULL; | |
584 | } | |
585 | } | |
586 | ||
587 | /* | |
588 | * This function moves a command to the completed orb list. | |
589 | */ | |
590 | static void sbp2util_mark_command_completed(struct scsi_id_instance_data *scsi_id, struct sbp2_command_info *command) | |
591 | { | |
592 | unsigned long flags; | |
593 | ||
594 | spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags); | |
595 | list_del(&command->list); | |
596 | sbp2util_free_command_dma(command); | |
597 | list_add_tail(&command->list, &scsi_id->sbp2_command_orb_completed); | |
598 | spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags); | |
599 | } | |
600 | ||
abd559b1 JM |
601 | /* |
602 | * Is scsi_id valid? Is the 1394 node still present? | |
603 | */ | |
604 | static inline int sbp2util_node_is_available(struct scsi_id_instance_data *scsi_id) | |
605 | { | |
606 | return scsi_id && scsi_id->ne && !scsi_id->ne->in_limbo; | |
607 | } | |
608 | ||
1da177e4 LT |
609 | \f |
610 | ||
611 | /********************************************* | |
612 | * IEEE-1394 core driver stack related section | |
613 | *********************************************/ | |
614 | static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud); | |
615 | ||
616 | static int sbp2_probe(struct device *dev) | |
617 | { | |
618 | struct unit_directory *ud; | |
619 | struct scsi_id_instance_data *scsi_id; | |
620 | ||
621 | SBP2_DEBUG("sbp2_probe"); | |
622 | ||
623 | ud = container_of(dev, struct unit_directory, device); | |
624 | ||
625 | /* Don't probe UD's that have the LUN flag. We'll probe the LUN(s) | |
626 | * instead. */ | |
627 | if (ud->flags & UNIT_DIRECTORY_HAS_LUN_DIRECTORY) | |
628 | return -ENODEV; | |
629 | ||
630 | scsi_id = sbp2_alloc_device(ud); | |
631 | ||
632 | if (!scsi_id) | |
633 | return -ENOMEM; | |
634 | ||
635 | sbp2_parse_unit_directory(scsi_id, ud); | |
636 | ||
637 | return sbp2_start_device(scsi_id); | |
638 | } | |
639 | ||
640 | static int sbp2_remove(struct device *dev) | |
641 | { | |
642 | struct unit_directory *ud; | |
643 | struct scsi_id_instance_data *scsi_id; | |
abd559b1 | 644 | struct scsi_device *sdev; |
1da177e4 LT |
645 | |
646 | SBP2_DEBUG("sbp2_remove"); | |
647 | ||
648 | ud = container_of(dev, struct unit_directory, device); | |
649 | scsi_id = ud->device.driver_data; | |
abd559b1 JM |
650 | if (!scsi_id) |
651 | return 0; | |
652 | ||
653 | /* Trigger shutdown functions in scsi's highlevel. */ | |
654 | if (scsi_id->scsi_host) | |
655 | scsi_unblock_requests(scsi_id->scsi_host); | |
656 | sdev = scsi_id->sdev; | |
657 | if (sdev) { | |
658 | scsi_id->sdev = NULL; | |
659 | scsi_remove_device(sdev); | |
660 | } | |
1da177e4 LT |
661 | |
662 | sbp2_logout_device(scsi_id); | |
663 | sbp2_remove_device(scsi_id); | |
664 | ||
665 | return 0; | |
666 | } | |
667 | ||
668 | static int sbp2_update(struct unit_directory *ud) | |
669 | { | |
670 | struct scsi_id_instance_data *scsi_id = ud->device.driver_data; | |
671 | ||
672 | SBP2_DEBUG("sbp2_update"); | |
673 | ||
674 | if (sbp2_reconnect_device(scsi_id)) { | |
675 | ||
676 | /* | |
677 | * Ok, reconnect has failed. Perhaps we didn't | |
678 | * reconnect fast enough. Try doing a regular login, but | |
679 | * first do a logout just in case of any weirdness. | |
680 | */ | |
681 | sbp2_logout_device(scsi_id); | |
682 | ||
683 | if (sbp2_login_device(scsi_id)) { | |
684 | /* Login failed too, just fail, and the backend | |
685 | * will call our sbp2_remove for us */ | |
686 | SBP2_ERR("Failed to reconnect to sbp2 device!"); | |
687 | return -EBUSY; | |
688 | } | |
689 | } | |
690 | ||
691 | /* Set max retries to something large on the device. */ | |
692 | sbp2_set_busy_timeout(scsi_id); | |
693 | ||
694 | /* Do a SBP-2 fetch agent reset. */ | |
695 | sbp2_agent_reset(scsi_id, 1); | |
696 | ||
697 | /* Get the max speed and packet size that we can use. */ | |
698 | sbp2_max_speed_and_size(scsi_id); | |
699 | ||
700 | /* Complete any pending commands with busy (so they get | |
701 | * retried) and remove them from our queue | |
702 | */ | |
703 | sbp2scsi_complete_all_commands(scsi_id, DID_BUS_BUSY); | |
704 | ||
705 | /* Make sure we unblock requests (since this is likely after a bus | |
706 | * reset). */ | |
707 | scsi_unblock_requests(scsi_id->scsi_host); | |
708 | ||
709 | return 0; | |
710 | } | |
711 | ||
712 | /* This functions is called by the sbp2_probe, for each new device. We now | |
713 | * allocate one scsi host for each scsi_id (unit directory). */ | |
714 | static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud) | |
715 | { | |
716 | struct sbp2scsi_host_info *hi; | |
717 | struct Scsi_Host *scsi_host = NULL; | |
718 | struct scsi_id_instance_data *scsi_id = NULL; | |
719 | ||
720 | SBP2_DEBUG("sbp2_alloc_device"); | |
721 | ||
722 | scsi_id = kmalloc(sizeof(*scsi_id), GFP_KERNEL); | |
723 | if (!scsi_id) { | |
724 | SBP2_ERR("failed to create scsi_id"); | |
725 | goto failed_alloc; | |
726 | } | |
727 | memset(scsi_id, 0, sizeof(*scsi_id)); | |
728 | ||
729 | scsi_id->ne = ud->ne; | |
730 | scsi_id->ud = ud; | |
731 | scsi_id->speed_code = IEEE1394_SPEED_100; | |
732 | scsi_id->max_payload_size = sbp2_speedto_max_payload[IEEE1394_SPEED_100]; | |
733 | atomic_set(&scsi_id->sbp2_login_complete, 0); | |
734 | INIT_LIST_HEAD(&scsi_id->sbp2_command_orb_inuse); | |
735 | INIT_LIST_HEAD(&scsi_id->sbp2_command_orb_completed); | |
736 | INIT_LIST_HEAD(&scsi_id->scsi_list); | |
737 | spin_lock_init(&scsi_id->sbp2_command_orb_lock); | |
738 | scsi_id->sbp2_device_type_and_lun = SBP2_DEVICE_TYPE_LUN_UNINITIALIZED; | |
739 | ||
740 | ud->device.driver_data = scsi_id; | |
741 | ||
742 | hi = hpsb_get_hostinfo(&sbp2_highlevel, ud->ne->host); | |
743 | if (!hi) { | |
744 | hi = hpsb_create_hostinfo(&sbp2_highlevel, ud->ne->host, sizeof(*hi)); | |
745 | if (!hi) { | |
746 | SBP2_ERR("failed to allocate hostinfo"); | |
747 | goto failed_alloc; | |
748 | } | |
749 | SBP2_DEBUG("sbp2_alloc_device: allocated hostinfo"); | |
750 | hi->host = ud->ne->host; | |
751 | INIT_LIST_HEAD(&hi->scsi_ids); | |
752 | ||
753 | /* Register our sbp2 status address space... */ | |
754 | hpsb_register_addrspace(&sbp2_highlevel, ud->ne->host, &sbp2_ops, | |
755 | SBP2_STATUS_FIFO_ADDRESS, | |
756 | SBP2_STATUS_FIFO_ADDRESS + | |
757 | SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(SBP2_MAX_UDS_PER_NODE+1)); | |
758 | #ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA | |
759 | /* Handle data movement if physical dma is not | |
760 | * enabled/supportedon host controller */ | |
761 | hpsb_register_addrspace(&sbp2_highlevel, ud->ne->host, &sbp2_physdma_ops, | |
762 | 0x0ULL, 0xfffffffcULL); | |
763 | #endif | |
764 | } | |
765 | ||
766 | scsi_id->hi = hi; | |
767 | ||
768 | list_add_tail(&scsi_id->scsi_list, &hi->scsi_ids); | |
769 | ||
770 | /* Register our host with the SCSI stack. */ | |
a2ef79e1 AO |
771 | scsi_host = scsi_host_alloc(&scsi_driver_template, |
772 | sizeof (unsigned long)); | |
1da177e4 LT |
773 | if (!scsi_host) { |
774 | SBP2_ERR("failed to register scsi host"); | |
775 | goto failed_alloc; | |
776 | } | |
777 | ||
778 | scsi_host->hostdata[0] = (unsigned long)scsi_id; | |
779 | ||
780 | if (!scsi_add_host(scsi_host, &ud->device)) { | |
781 | scsi_id->scsi_host = scsi_host; | |
782 | return scsi_id; | |
783 | } | |
784 | ||
785 | SBP2_ERR("failed to add scsi host"); | |
786 | scsi_host_put(scsi_host); | |
787 | ||
788 | failed_alloc: | |
789 | sbp2_remove_device(scsi_id); | |
790 | return NULL; | |
791 | } | |
792 | ||
793 | ||
794 | static void sbp2_host_reset(struct hpsb_host *host) | |
795 | { | |
796 | struct sbp2scsi_host_info *hi; | |
797 | struct scsi_id_instance_data *scsi_id; | |
798 | ||
799 | hi = hpsb_get_hostinfo(&sbp2_highlevel, host); | |
800 | ||
801 | if (hi) { | |
802 | list_for_each_entry(scsi_id, &hi->scsi_ids, scsi_list) | |
803 | scsi_block_requests(scsi_id->scsi_host); | |
804 | } | |
805 | } | |
806 | ||
807 | ||
808 | /* | |
809 | * This function is where we first pull the node unique ids, and then | |
810 | * allocate memory and register a SBP-2 device. | |
811 | */ | |
812 | static int sbp2_start_device(struct scsi_id_instance_data *scsi_id) | |
813 | { | |
814 | struct sbp2scsi_host_info *hi = scsi_id->hi; | |
146f7262 | 815 | int error; |
1da177e4 LT |
816 | |
817 | SBP2_DEBUG("sbp2_start_device"); | |
818 | ||
819 | /* Login FIFO DMA */ | |
820 | scsi_id->login_response = | |
821 | pci_alloc_consistent(hi->host->pdev, sizeof(struct sbp2_login_response), | |
822 | &scsi_id->login_response_dma); | |
823 | if (!scsi_id->login_response) | |
824 | goto alloc_fail; | |
825 | SBP2_DMA_ALLOC("consistent DMA region for login FIFO"); | |
826 | ||
827 | /* Query logins ORB DMA */ | |
828 | scsi_id->query_logins_orb = | |
829 | pci_alloc_consistent(hi->host->pdev, sizeof(struct sbp2_query_logins_orb), | |
830 | &scsi_id->query_logins_orb_dma); | |
831 | if (!scsi_id->query_logins_orb) | |
832 | goto alloc_fail; | |
833 | SBP2_DMA_ALLOC("consistent DMA region for query logins ORB"); | |
834 | ||
835 | /* Query logins response DMA */ | |
836 | scsi_id->query_logins_response = | |
837 | pci_alloc_consistent(hi->host->pdev, sizeof(struct sbp2_query_logins_response), | |
838 | &scsi_id->query_logins_response_dma); | |
839 | if (!scsi_id->query_logins_response) | |
840 | goto alloc_fail; | |
841 | SBP2_DMA_ALLOC("consistent DMA region for query logins response"); | |
842 | ||
843 | /* Reconnect ORB DMA */ | |
844 | scsi_id->reconnect_orb = | |
845 | pci_alloc_consistent(hi->host->pdev, sizeof(struct sbp2_reconnect_orb), | |
846 | &scsi_id->reconnect_orb_dma); | |
847 | if (!scsi_id->reconnect_orb) | |
848 | goto alloc_fail; | |
849 | SBP2_DMA_ALLOC("consistent DMA region for reconnect ORB"); | |
850 | ||
851 | /* Logout ORB DMA */ | |
852 | scsi_id->logout_orb = | |
853 | pci_alloc_consistent(hi->host->pdev, sizeof(struct sbp2_logout_orb), | |
854 | &scsi_id->logout_orb_dma); | |
855 | if (!scsi_id->logout_orb) | |
856 | goto alloc_fail; | |
857 | SBP2_DMA_ALLOC("consistent DMA region for logout ORB"); | |
858 | ||
859 | /* Login ORB DMA */ | |
860 | scsi_id->login_orb = | |
861 | pci_alloc_consistent(hi->host->pdev, sizeof(struct sbp2_login_orb), | |
862 | &scsi_id->login_orb_dma); | |
863 | if (!scsi_id->login_orb) { | |
864 | alloc_fail: | |
865 | if (scsi_id->query_logins_response) { | |
866 | pci_free_consistent(hi->host->pdev, | |
867 | sizeof(struct sbp2_query_logins_response), | |
868 | scsi_id->query_logins_response, | |
869 | scsi_id->query_logins_response_dma); | |
870 | SBP2_DMA_FREE("query logins response DMA"); | |
871 | } | |
872 | ||
873 | if (scsi_id->query_logins_orb) { | |
874 | pci_free_consistent(hi->host->pdev, | |
875 | sizeof(struct sbp2_query_logins_orb), | |
876 | scsi_id->query_logins_orb, | |
877 | scsi_id->query_logins_orb_dma); | |
878 | SBP2_DMA_FREE("query logins ORB DMA"); | |
879 | } | |
880 | ||
881 | if (scsi_id->logout_orb) { | |
882 | pci_free_consistent(hi->host->pdev, | |
883 | sizeof(struct sbp2_logout_orb), | |
884 | scsi_id->logout_orb, | |
885 | scsi_id->logout_orb_dma); | |
886 | SBP2_DMA_FREE("logout ORB DMA"); | |
887 | } | |
888 | ||
889 | if (scsi_id->reconnect_orb) { | |
890 | pci_free_consistent(hi->host->pdev, | |
891 | sizeof(struct sbp2_reconnect_orb), | |
892 | scsi_id->reconnect_orb, | |
893 | scsi_id->reconnect_orb_dma); | |
894 | SBP2_DMA_FREE("reconnect ORB DMA"); | |
895 | } | |
896 | ||
897 | if (scsi_id->login_response) { | |
898 | pci_free_consistent(hi->host->pdev, | |
899 | sizeof(struct sbp2_login_response), | |
900 | scsi_id->login_response, | |
901 | scsi_id->login_response_dma); | |
902 | SBP2_DMA_FREE("login FIFO DMA"); | |
903 | } | |
904 | ||
905 | list_del(&scsi_id->scsi_list); | |
906 | ||
907 | kfree(scsi_id); | |
908 | ||
909 | SBP2_ERR ("Could not allocate memory for scsi_id"); | |
910 | ||
911 | return -ENOMEM; | |
912 | } | |
913 | SBP2_DMA_ALLOC("consistent DMA region for login ORB"); | |
914 | ||
915 | SBP2_DEBUG("New SBP-2 device inserted, SCSI ID = %x", scsi_id->ud->id); | |
916 | ||
917 | /* | |
918 | * Create our command orb pool | |
919 | */ | |
920 | if (sbp2util_create_command_orb_pool(scsi_id)) { | |
921 | SBP2_ERR("sbp2util_create_command_orb_pool failed!"); | |
922 | sbp2_remove_device(scsi_id); | |
923 | return -ENOMEM; | |
924 | } | |
925 | ||
926 | /* Schedule a timeout here. The reason is that we may be so close | |
927 | * to a bus reset, that the device is not available for logins. | |
928 | * This can happen when the bus reset is caused by the host | |
929 | * connected to the sbp2 device being removed. That host would | |
930 | * have a certain amount of time to relogin before the sbp2 device | |
931 | * allows someone else to login instead. One second makes sense. */ | |
932 | msleep_interruptible(1000); | |
933 | if (signal_pending(current)) { | |
934 | SBP2_WARN("aborting sbp2_start_device due to event"); | |
935 | sbp2_remove_device(scsi_id); | |
936 | return -EINTR; | |
937 | } | |
938 | ||
939 | /* | |
940 | * Login to the sbp-2 device | |
941 | */ | |
942 | if (sbp2_login_device(scsi_id)) { | |
943 | /* Login failed, just remove the device. */ | |
944 | sbp2_remove_device(scsi_id); | |
945 | return -EBUSY; | |
946 | } | |
947 | ||
948 | /* | |
949 | * Set max retries to something large on the device | |
950 | */ | |
951 | sbp2_set_busy_timeout(scsi_id); | |
952 | ||
953 | /* | |
954 | * Do a SBP-2 fetch agent reset | |
955 | */ | |
956 | sbp2_agent_reset(scsi_id, 1); | |
957 | ||
958 | /* | |
959 | * Get the max speed and packet size that we can use | |
960 | */ | |
961 | sbp2_max_speed_and_size(scsi_id); | |
962 | ||
963 | /* Add this device to the scsi layer now */ | |
146f7262 JB |
964 | error = scsi_add_device(scsi_id->scsi_host, 0, scsi_id->ud->id, 0); |
965 | if (error) { | |
1da177e4 | 966 | SBP2_ERR("scsi_add_device failed"); |
146f7262 | 967 | return error; |
1da177e4 LT |
968 | } |
969 | ||
970 | return 0; | |
971 | } | |
972 | ||
973 | /* | |
974 | * This function removes an sbp2 device from the sbp2scsi_host_info struct. | |
975 | */ | |
976 | static void sbp2_remove_device(struct scsi_id_instance_data *scsi_id) | |
977 | { | |
978 | struct sbp2scsi_host_info *hi; | |
979 | ||
980 | SBP2_DEBUG("sbp2_remove_device"); | |
981 | ||
982 | if (!scsi_id) | |
983 | return; | |
984 | ||
985 | hi = scsi_id->hi; | |
986 | ||
987 | /* This will remove our scsi device aswell */ | |
988 | if (scsi_id->scsi_host) { | |
989 | scsi_remove_host(scsi_id->scsi_host); | |
990 | scsi_host_put(scsi_id->scsi_host); | |
991 | } | |
992 | ||
993 | sbp2util_remove_command_orb_pool(scsi_id); | |
994 | ||
995 | list_del(&scsi_id->scsi_list); | |
996 | ||
997 | if (scsi_id->login_response) { | |
998 | pci_free_consistent(hi->host->pdev, | |
999 | sizeof(struct sbp2_login_response), | |
1000 | scsi_id->login_response, | |
1001 | scsi_id->login_response_dma); | |
1002 | SBP2_DMA_FREE("single login FIFO"); | |
1003 | } | |
1004 | ||
1005 | if (scsi_id->login_orb) { | |
1006 | pci_free_consistent(hi->host->pdev, | |
1007 | sizeof(struct sbp2_login_orb), | |
1008 | scsi_id->login_orb, | |
1009 | scsi_id->login_orb_dma); | |
1010 | SBP2_DMA_FREE("single login ORB"); | |
1011 | } | |
1012 | ||
1013 | if (scsi_id->reconnect_orb) { | |
1014 | pci_free_consistent(hi->host->pdev, | |
1015 | sizeof(struct sbp2_reconnect_orb), | |
1016 | scsi_id->reconnect_orb, | |
1017 | scsi_id->reconnect_orb_dma); | |
1018 | SBP2_DMA_FREE("single reconnect orb"); | |
1019 | } | |
1020 | ||
1021 | if (scsi_id->logout_orb) { | |
1022 | pci_free_consistent(hi->host->pdev, | |
1023 | sizeof(struct sbp2_logout_orb), | |
1024 | scsi_id->logout_orb, | |
1025 | scsi_id->logout_orb_dma); | |
1026 | SBP2_DMA_FREE("single logout orb"); | |
1027 | } | |
1028 | ||
1029 | if (scsi_id->query_logins_orb) { | |
1030 | pci_free_consistent(hi->host->pdev, | |
1031 | sizeof(struct sbp2_query_logins_orb), | |
1032 | scsi_id->query_logins_orb, | |
1033 | scsi_id->query_logins_orb_dma); | |
1034 | SBP2_DMA_FREE("single query logins orb"); | |
1035 | } | |
1036 | ||
1037 | if (scsi_id->query_logins_response) { | |
1038 | pci_free_consistent(hi->host->pdev, | |
1039 | sizeof(struct sbp2_query_logins_response), | |
1040 | scsi_id->query_logins_response, | |
1041 | scsi_id->query_logins_response_dma); | |
1042 | SBP2_DMA_FREE("single query logins data"); | |
1043 | } | |
1044 | ||
1045 | scsi_id->ud->device.driver_data = NULL; | |
1046 | ||
1047 | SBP2_DEBUG("SBP-2 device removed, SCSI ID = %d", scsi_id->ud->id); | |
1048 | ||
1049 | kfree(scsi_id); | |
1050 | } | |
1051 | ||
1052 | #ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA | |
1053 | /* | |
1054 | * This function deals with physical dma write requests (for adapters that do not support | |
1055 | * physical dma in hardware). Mostly just here for debugging... | |
1056 | */ | |
1057 | static int sbp2_handle_physdma_write(struct hpsb_host *host, int nodeid, int destid, quadlet_t *data, | |
1058 | u64 addr, size_t length, u16 flags) | |
1059 | { | |
1060 | ||
1061 | /* | |
1062 | * Manually put the data in the right place. | |
1063 | */ | |
1064 | memcpy(bus_to_virt((u32)addr), data, length); | |
1065 | sbp2util_packet_dump(data, length, "sbp2 phys dma write by device", (u32)addr); | |
1066 | return(RCODE_COMPLETE); | |
1067 | } | |
1068 | ||
1069 | /* | |
1070 | * This function deals with physical dma read requests (for adapters that do not support | |
1071 | * physical dma in hardware). Mostly just here for debugging... | |
1072 | */ | |
1073 | static int sbp2_handle_physdma_read(struct hpsb_host *host, int nodeid, quadlet_t *data, | |
1074 | u64 addr, size_t length, u16 flags) | |
1075 | { | |
1076 | ||
1077 | /* | |
1078 | * Grab data from memory and send a read response. | |
1079 | */ | |
1080 | memcpy(data, bus_to_virt((u32)addr), length); | |
1081 | sbp2util_packet_dump(data, length, "sbp2 phys dma read by device", (u32)addr); | |
1082 | return(RCODE_COMPLETE); | |
1083 | } | |
1084 | #endif | |
1085 | ||
1086 | ||
1087 | /************************************** | |
1088 | * SBP-2 protocol related section | |
1089 | **************************************/ | |
1090 | ||
1091 | /* | |
1092 | * This function determines if we should convert scsi commands for a particular sbp2 device type | |
1093 | */ | |
1094 | static __inline__ int sbp2_command_conversion_device_type(u8 device_type) | |
1095 | { | |
1096 | return (((device_type == TYPE_DISK) || | |
631e8a13 | 1097 | (device_type == TYPE_RBC) || |
1da177e4 LT |
1098 | (device_type == TYPE_ROM)) ? 1:0); |
1099 | } | |
1100 | ||
1101 | /* | |
1102 | * This function queries the device for the maximum concurrent logins it | |
1103 | * supports. | |
1104 | */ | |
1105 | static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id) | |
1106 | { | |
1107 | struct sbp2scsi_host_info *hi = scsi_id->hi; | |
1108 | quadlet_t data[2]; | |
1109 | int max_logins; | |
1110 | int active_logins; | |
1111 | ||
1112 | SBP2_DEBUG("sbp2_query_logins"); | |
1113 | ||
1114 | scsi_id->query_logins_orb->reserved1 = 0x0; | |
1115 | scsi_id->query_logins_orb->reserved2 = 0x0; | |
1116 | ||
1117 | scsi_id->query_logins_orb->query_response_lo = scsi_id->query_logins_response_dma; | |
1118 | scsi_id->query_logins_orb->query_response_hi = ORB_SET_NODE_ID(hi->host->node_id); | |
1119 | SBP2_DEBUG("sbp2_query_logins: query_response_hi/lo initialized"); | |
1120 | ||
1121 | scsi_id->query_logins_orb->lun_misc = ORB_SET_FUNCTION(SBP2_QUERY_LOGINS_REQUEST); | |
1122 | scsi_id->query_logins_orb->lun_misc |= ORB_SET_NOTIFY(1); | |
1123 | if (scsi_id->sbp2_device_type_and_lun != SBP2_DEVICE_TYPE_LUN_UNINITIALIZED) { | |
1124 | scsi_id->query_logins_orb->lun_misc |= ORB_SET_LUN(scsi_id->sbp2_device_type_and_lun); | |
1125 | SBP2_DEBUG("sbp2_query_logins: set lun to %d", | |
1126 | ORB_SET_LUN(scsi_id->sbp2_device_type_and_lun)); | |
1127 | } | |
1128 | SBP2_DEBUG("sbp2_query_logins: lun_misc initialized"); | |
1129 | ||
1130 | scsi_id->query_logins_orb->reserved_resp_length = | |
1131 | ORB_SET_QUERY_LOGINS_RESP_LENGTH(sizeof(struct sbp2_query_logins_response)); | |
1132 | SBP2_DEBUG("sbp2_query_logins: reserved_resp_length initialized"); | |
1133 | ||
1134 | scsi_id->query_logins_orb->status_FIFO_lo = SBP2_STATUS_FIFO_ADDRESS_LO + | |
1135 | SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(scsi_id->ud->id); | |
1136 | scsi_id->query_logins_orb->status_FIFO_hi = (ORB_SET_NODE_ID(hi->host->node_id) | | |
1137 | SBP2_STATUS_FIFO_ADDRESS_HI); | |
1138 | SBP2_DEBUG("sbp2_query_logins: status FIFO initialized"); | |
1139 | ||
1140 | sbp2util_cpu_to_be32_buffer(scsi_id->query_logins_orb, sizeof(struct sbp2_query_logins_orb)); | |
1141 | ||
1142 | SBP2_DEBUG("sbp2_query_logins: orb byte-swapped"); | |
1143 | ||
1144 | sbp2util_packet_dump(scsi_id->query_logins_orb, sizeof(struct sbp2_query_logins_orb), | |
1145 | "sbp2 query logins orb", scsi_id->query_logins_orb_dma); | |
1146 | ||
1147 | memset(scsi_id->query_logins_response, 0, sizeof(struct sbp2_query_logins_response)); | |
1148 | memset(&scsi_id->status_block, 0, sizeof(struct sbp2_status_block)); | |
1149 | ||
1150 | SBP2_DEBUG("sbp2_query_logins: query_logins_response/status FIFO memset"); | |
1151 | ||
1152 | data[0] = ORB_SET_NODE_ID(hi->host->node_id); | |
1153 | data[1] = scsi_id->query_logins_orb_dma; | |
1154 | sbp2util_cpu_to_be32_buffer(data, 8); | |
1155 | ||
1156 | atomic_set(&scsi_id->sbp2_login_complete, 0); | |
1157 | ||
1158 | SBP2_DEBUG("sbp2_query_logins: prepared to write"); | |
1159 | hpsb_node_write(scsi_id->ne, scsi_id->sbp2_management_agent_addr, data, 8); | |
1160 | SBP2_DEBUG("sbp2_query_logins: written"); | |
1161 | ||
1162 | if (sbp2util_down_timeout(&scsi_id->sbp2_login_complete, 2*HZ)) { | |
1163 | SBP2_INFO("Error querying logins to SBP-2 device - timed out"); | |
1164 | return(-EIO); | |
1165 | } | |
1166 | ||
1167 | if (scsi_id->status_block.ORB_offset_lo != scsi_id->query_logins_orb_dma) { | |
1168 | SBP2_INFO("Error querying logins to SBP-2 device - timed out"); | |
1169 | return(-EIO); | |
1170 | } | |
1171 | ||
1172 | if (STATUS_GET_RESP(scsi_id->status_block.ORB_offset_hi_misc) || | |
1173 | STATUS_GET_DEAD_BIT(scsi_id->status_block.ORB_offset_hi_misc) || | |
1174 | STATUS_GET_SBP_STATUS(scsi_id->status_block.ORB_offset_hi_misc)) { | |
1175 | ||
1176 | SBP2_INFO("Error querying logins to SBP-2 device - timed out"); | |
1177 | return(-EIO); | |
1178 | } | |
1179 | ||
1180 | sbp2util_cpu_to_be32_buffer(scsi_id->query_logins_response, sizeof(struct sbp2_query_logins_response)); | |
1181 | ||
1182 | SBP2_DEBUG("length_max_logins = %x", | |
1183 | (unsigned int)scsi_id->query_logins_response->length_max_logins); | |
1184 | ||
1185 | SBP2_DEBUG("Query logins to SBP-2 device successful"); | |
1186 | ||
1187 | max_logins = RESPONSE_GET_MAX_LOGINS(scsi_id->query_logins_response->length_max_logins); | |
1188 | SBP2_DEBUG("Maximum concurrent logins supported: %d", max_logins); | |
1189 | ||
1190 | active_logins = RESPONSE_GET_ACTIVE_LOGINS(scsi_id->query_logins_response->length_max_logins); | |
1191 | SBP2_DEBUG("Number of active logins: %d", active_logins); | |
1192 | ||
1193 | if (active_logins >= max_logins) { | |
1194 | return(-EIO); | |
1195 | } | |
1196 | ||
1197 | return 0; | |
1198 | } | |
1199 | ||
1200 | /* | |
1201 | * This function is called in order to login to a particular SBP-2 device, | |
1202 | * after a bus reset. | |
1203 | */ | |
1204 | static int sbp2_login_device(struct scsi_id_instance_data *scsi_id) | |
1205 | { | |
1206 | struct sbp2scsi_host_info *hi = scsi_id->hi; | |
1207 | quadlet_t data[2]; | |
1208 | ||
1209 | SBP2_DEBUG("sbp2_login_device"); | |
1210 | ||
1211 | if (!scsi_id->login_orb) { | |
1212 | SBP2_DEBUG("sbp2_login_device: login_orb not alloc'd!"); | |
1213 | return(-EIO); | |
1214 | } | |
1215 | ||
1216 | if (!exclusive_login) { | |
1217 | if (sbp2_query_logins(scsi_id)) { | |
1218 | SBP2_INFO("Device does not support any more concurrent logins"); | |
1219 | return(-EIO); | |
1220 | } | |
1221 | } | |
1222 | ||
1223 | /* Set-up login ORB, assume no password */ | |
1224 | scsi_id->login_orb->password_hi = 0; | |
1225 | scsi_id->login_orb->password_lo = 0; | |
1226 | SBP2_DEBUG("sbp2_login_device: password_hi/lo initialized"); | |
1227 | ||
1228 | scsi_id->login_orb->login_response_lo = scsi_id->login_response_dma; | |
1229 | scsi_id->login_orb->login_response_hi = ORB_SET_NODE_ID(hi->host->node_id); | |
1230 | SBP2_DEBUG("sbp2_login_device: login_response_hi/lo initialized"); | |
1231 | ||
1232 | scsi_id->login_orb->lun_misc = ORB_SET_FUNCTION(SBP2_LOGIN_REQUEST); | |
1233 | scsi_id->login_orb->lun_misc |= ORB_SET_RECONNECT(0); /* One second reconnect time */ | |
1234 | scsi_id->login_orb->lun_misc |= ORB_SET_EXCLUSIVE(exclusive_login); /* Exclusive access to device */ | |
1235 | scsi_id->login_orb->lun_misc |= ORB_SET_NOTIFY(1); /* Notify us of login complete */ | |
1236 | /* Set the lun if we were able to pull it from the device's unit directory */ | |
1237 | if (scsi_id->sbp2_device_type_and_lun != SBP2_DEVICE_TYPE_LUN_UNINITIALIZED) { | |
1238 | scsi_id->login_orb->lun_misc |= ORB_SET_LUN(scsi_id->sbp2_device_type_and_lun); | |
1239 | SBP2_DEBUG("sbp2_query_logins: set lun to %d", | |
1240 | ORB_SET_LUN(scsi_id->sbp2_device_type_and_lun)); | |
1241 | } | |
1242 | SBP2_DEBUG("sbp2_login_device: lun_misc initialized"); | |
1243 | ||
1244 | scsi_id->login_orb->passwd_resp_lengths = | |
1245 | ORB_SET_LOGIN_RESP_LENGTH(sizeof(struct sbp2_login_response)); | |
1246 | SBP2_DEBUG("sbp2_login_device: passwd_resp_lengths initialized"); | |
1247 | ||
1248 | scsi_id->login_orb->status_FIFO_lo = SBP2_STATUS_FIFO_ADDRESS_LO + | |
1249 | SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(scsi_id->ud->id); | |
1250 | scsi_id->login_orb->status_FIFO_hi = (ORB_SET_NODE_ID(hi->host->node_id) | | |
1251 | SBP2_STATUS_FIFO_ADDRESS_HI); | |
1252 | SBP2_DEBUG("sbp2_login_device: status FIFO initialized"); | |
1253 | ||
1254 | /* | |
1255 | * Byte swap ORB if necessary | |
1256 | */ | |
1257 | sbp2util_cpu_to_be32_buffer(scsi_id->login_orb, sizeof(struct sbp2_login_orb)); | |
1258 | ||
1259 | SBP2_DEBUG("sbp2_login_device: orb byte-swapped"); | |
1260 | ||
1261 | sbp2util_packet_dump(scsi_id->login_orb, sizeof(struct sbp2_login_orb), | |
1262 | "sbp2 login orb", scsi_id->login_orb_dma); | |
1263 | ||
1264 | /* | |
1265 | * Initialize login response and status fifo | |
1266 | */ | |
1267 | memset(scsi_id->login_response, 0, sizeof(struct sbp2_login_response)); | |
1268 | memset(&scsi_id->status_block, 0, sizeof(struct sbp2_status_block)); | |
1269 | ||
1270 | SBP2_DEBUG("sbp2_login_device: login_response/status FIFO memset"); | |
1271 | ||
1272 | /* | |
1273 | * Ok, let's write to the target's management agent register | |
1274 | */ | |
1275 | data[0] = ORB_SET_NODE_ID(hi->host->node_id); | |
1276 | data[1] = scsi_id->login_orb_dma; | |
1277 | sbp2util_cpu_to_be32_buffer(data, 8); | |
1278 | ||
1279 | atomic_set(&scsi_id->sbp2_login_complete, 0); | |
1280 | ||
1281 | SBP2_DEBUG("sbp2_login_device: prepared to write to %08x", | |
1282 | (unsigned int)scsi_id->sbp2_management_agent_addr); | |
1283 | hpsb_node_write(scsi_id->ne, scsi_id->sbp2_management_agent_addr, data, 8); | |
1284 | SBP2_DEBUG("sbp2_login_device: written"); | |
1285 | ||
1286 | /* | |
1287 | * Wait for login status (up to 20 seconds)... | |
1288 | */ | |
1289 | if (sbp2util_down_timeout(&scsi_id->sbp2_login_complete, 20*HZ)) { | |
1290 | SBP2_ERR("Error logging into SBP-2 device - login timed-out"); | |
1291 | return(-EIO); | |
1292 | } | |
1293 | ||
1294 | /* | |
1295 | * Sanity. Make sure status returned matches login orb. | |
1296 | */ | |
1297 | if (scsi_id->status_block.ORB_offset_lo != scsi_id->login_orb_dma) { | |
1298 | SBP2_ERR("Error logging into SBP-2 device - login timed-out"); | |
1299 | return(-EIO); | |
1300 | } | |
1301 | ||
1302 | /* | |
1303 | * Check status | |
1304 | */ | |
1305 | if (STATUS_GET_RESP(scsi_id->status_block.ORB_offset_hi_misc) || | |
1306 | STATUS_GET_DEAD_BIT(scsi_id->status_block.ORB_offset_hi_misc) || | |
1307 | STATUS_GET_SBP_STATUS(scsi_id->status_block.ORB_offset_hi_misc)) { | |
1308 | ||
1309 | SBP2_ERR("Error logging into SBP-2 device - login failed"); | |
1310 | return(-EIO); | |
1311 | } | |
1312 | ||
1313 | /* | |
1314 | * Byte swap the login response, for use when reconnecting or | |
1315 | * logging out. | |
1316 | */ | |
1317 | sbp2util_cpu_to_be32_buffer(scsi_id->login_response, sizeof(struct sbp2_login_response)); | |
1318 | ||
1319 | /* | |
1320 | * Grab our command block agent address from the login response. | |
1321 | */ | |
1322 | SBP2_DEBUG("command_block_agent_hi = %x", | |
1323 | (unsigned int)scsi_id->login_response->command_block_agent_hi); | |
1324 | SBP2_DEBUG("command_block_agent_lo = %x", | |
1325 | (unsigned int)scsi_id->login_response->command_block_agent_lo); | |
1326 | ||
1327 | scsi_id->sbp2_command_block_agent_addr = | |
1328 | ((u64)scsi_id->login_response->command_block_agent_hi) << 32; | |
1329 | scsi_id->sbp2_command_block_agent_addr |= ((u64)scsi_id->login_response->command_block_agent_lo); | |
1330 | scsi_id->sbp2_command_block_agent_addr &= 0x0000ffffffffffffULL; | |
1331 | ||
1332 | SBP2_INFO("Logged into SBP-2 device"); | |
1333 | ||
1334 | return(0); | |
1335 | ||
1336 | } | |
1337 | ||
1338 | /* | |
1339 | * This function is called in order to logout from a particular SBP-2 | |
1340 | * device, usually called during driver unload. | |
1341 | */ | |
1342 | static int sbp2_logout_device(struct scsi_id_instance_data *scsi_id) | |
1343 | { | |
1344 | struct sbp2scsi_host_info *hi = scsi_id->hi; | |
1345 | quadlet_t data[2]; | |
1346 | int error; | |
1347 | ||
1348 | SBP2_DEBUG("sbp2_logout_device"); | |
1349 | ||
1350 | /* | |
1351 | * Set-up logout ORB | |
1352 | */ | |
1353 | scsi_id->logout_orb->reserved1 = 0x0; | |
1354 | scsi_id->logout_orb->reserved2 = 0x0; | |
1355 | scsi_id->logout_orb->reserved3 = 0x0; | |
1356 | scsi_id->logout_orb->reserved4 = 0x0; | |
1357 | ||
1358 | scsi_id->logout_orb->login_ID_misc = ORB_SET_FUNCTION(SBP2_LOGOUT_REQUEST); | |
1359 | scsi_id->logout_orb->login_ID_misc |= ORB_SET_LOGIN_ID(scsi_id->login_response->length_login_ID); | |
1360 | ||
1361 | /* Notify us when complete */ | |
1362 | scsi_id->logout_orb->login_ID_misc |= ORB_SET_NOTIFY(1); | |
1363 | ||
1364 | scsi_id->logout_orb->reserved5 = 0x0; | |
1365 | scsi_id->logout_orb->status_FIFO_lo = SBP2_STATUS_FIFO_ADDRESS_LO + | |
1366 | SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(scsi_id->ud->id); | |
1367 | scsi_id->logout_orb->status_FIFO_hi = (ORB_SET_NODE_ID(hi->host->node_id) | | |
1368 | SBP2_STATUS_FIFO_ADDRESS_HI); | |
1369 | ||
1370 | /* | |
1371 | * Byte swap ORB if necessary | |
1372 | */ | |
1373 | sbp2util_cpu_to_be32_buffer(scsi_id->logout_orb, sizeof(struct sbp2_logout_orb)); | |
1374 | ||
1375 | sbp2util_packet_dump(scsi_id->logout_orb, sizeof(struct sbp2_logout_orb), | |
1376 | "sbp2 logout orb", scsi_id->logout_orb_dma); | |
1377 | ||
1378 | /* | |
1379 | * Ok, let's write to the target's management agent register | |
1380 | */ | |
1381 | data[0] = ORB_SET_NODE_ID(hi->host->node_id); | |
1382 | data[1] = scsi_id->logout_orb_dma; | |
1383 | sbp2util_cpu_to_be32_buffer(data, 8); | |
1384 | ||
1385 | atomic_set(&scsi_id->sbp2_login_complete, 0); | |
1386 | ||
1387 | error = hpsb_node_write(scsi_id->ne, | |
1388 | scsi_id->sbp2_management_agent_addr, | |
1389 | data, 8); | |
1390 | if (error) | |
1391 | return error; | |
1392 | ||
1393 | /* Wait for device to logout...1 second. */ | |
1394 | if (sbp2util_down_timeout(&scsi_id->sbp2_login_complete, HZ)) | |
1395 | return -EIO; | |
1396 | ||
1397 | SBP2_INFO("Logged out of SBP-2 device"); | |
1398 | ||
1399 | return(0); | |
1400 | ||
1401 | } | |
1402 | ||
1403 | /* | |
1404 | * This function is called in order to reconnect to a particular SBP-2 | |
1405 | * device, after a bus reset. | |
1406 | */ | |
1407 | static int sbp2_reconnect_device(struct scsi_id_instance_data *scsi_id) | |
1408 | { | |
1409 | struct sbp2scsi_host_info *hi = scsi_id->hi; | |
1410 | quadlet_t data[2]; | |
1411 | int error; | |
1412 | ||
1413 | SBP2_DEBUG("sbp2_reconnect_device"); | |
1414 | ||
1415 | /* | |
1416 | * Set-up reconnect ORB | |
1417 | */ | |
1418 | scsi_id->reconnect_orb->reserved1 = 0x0; | |
1419 | scsi_id->reconnect_orb->reserved2 = 0x0; | |
1420 | scsi_id->reconnect_orb->reserved3 = 0x0; | |
1421 | scsi_id->reconnect_orb->reserved4 = 0x0; | |
1422 | ||
1423 | scsi_id->reconnect_orb->login_ID_misc = ORB_SET_FUNCTION(SBP2_RECONNECT_REQUEST); | |
1424 | scsi_id->reconnect_orb->login_ID_misc |= | |
1425 | ORB_SET_LOGIN_ID(scsi_id->login_response->length_login_ID); | |
1426 | ||
1427 | /* Notify us when complete */ | |
1428 | scsi_id->reconnect_orb->login_ID_misc |= ORB_SET_NOTIFY(1); | |
1429 | ||
1430 | scsi_id->reconnect_orb->reserved5 = 0x0; | |
1431 | scsi_id->reconnect_orb->status_FIFO_lo = SBP2_STATUS_FIFO_ADDRESS_LO + | |
1432 | SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(scsi_id->ud->id); | |
1433 | scsi_id->reconnect_orb->status_FIFO_hi = | |
1434 | (ORB_SET_NODE_ID(hi->host->node_id) | SBP2_STATUS_FIFO_ADDRESS_HI); | |
1435 | ||
1436 | /* | |
1437 | * Byte swap ORB if necessary | |
1438 | */ | |
1439 | sbp2util_cpu_to_be32_buffer(scsi_id->reconnect_orb, sizeof(struct sbp2_reconnect_orb)); | |
1440 | ||
1441 | sbp2util_packet_dump(scsi_id->reconnect_orb, sizeof(struct sbp2_reconnect_orb), | |
1442 | "sbp2 reconnect orb", scsi_id->reconnect_orb_dma); | |
1443 | ||
1444 | /* | |
1445 | * Initialize status fifo | |
1446 | */ | |
1447 | memset(&scsi_id->status_block, 0, sizeof(struct sbp2_status_block)); | |
1448 | ||
1449 | /* | |
1450 | * Ok, let's write to the target's management agent register | |
1451 | */ | |
1452 | data[0] = ORB_SET_NODE_ID(hi->host->node_id); | |
1453 | data[1] = scsi_id->reconnect_orb_dma; | |
1454 | sbp2util_cpu_to_be32_buffer(data, 8); | |
1455 | ||
1456 | atomic_set(&scsi_id->sbp2_login_complete, 0); | |
1457 | ||
1458 | error = hpsb_node_write(scsi_id->ne, | |
1459 | scsi_id->sbp2_management_agent_addr, | |
1460 | data, 8); | |
1461 | if (error) | |
1462 | return error; | |
1463 | ||
1464 | /* | |
1465 | * Wait for reconnect status (up to 1 second)... | |
1466 | */ | |
1467 | if (sbp2util_down_timeout(&scsi_id->sbp2_login_complete, HZ)) { | |
1468 | SBP2_ERR("Error reconnecting to SBP-2 device - reconnect timed-out"); | |
1469 | return(-EIO); | |
1470 | } | |
1471 | ||
1472 | /* | |
1473 | * Sanity. Make sure status returned matches reconnect orb. | |
1474 | */ | |
1475 | if (scsi_id->status_block.ORB_offset_lo != scsi_id->reconnect_orb_dma) { | |
1476 | SBP2_ERR("Error reconnecting to SBP-2 device - reconnect timed-out"); | |
1477 | return(-EIO); | |
1478 | } | |
1479 | ||
1480 | /* | |
1481 | * Check status | |
1482 | */ | |
1483 | if (STATUS_GET_RESP(scsi_id->status_block.ORB_offset_hi_misc) || | |
1484 | STATUS_GET_DEAD_BIT(scsi_id->status_block.ORB_offset_hi_misc) || | |
1485 | STATUS_GET_SBP_STATUS(scsi_id->status_block.ORB_offset_hi_misc)) { | |
1486 | ||
1487 | SBP2_ERR("Error reconnecting to SBP-2 device - reconnect failed"); | |
1488 | return(-EIO); | |
1489 | } | |
1490 | ||
1491 | HPSB_DEBUG("Reconnected to SBP-2 device"); | |
1492 | ||
1493 | return(0); | |
1494 | ||
1495 | } | |
1496 | ||
1497 | /* | |
1498 | * This function is called in order to set the busy timeout (number of | |
1499 | * retries to attempt) on the sbp2 device. | |
1500 | */ | |
1501 | static int sbp2_set_busy_timeout(struct scsi_id_instance_data *scsi_id) | |
1502 | { | |
1503 | quadlet_t data; | |
1504 | ||
1505 | SBP2_DEBUG("sbp2_set_busy_timeout"); | |
1506 | ||
1507 | /* | |
1508 | * Ok, let's write to the target's busy timeout register | |
1509 | */ | |
1510 | data = cpu_to_be32(SBP2_BUSY_TIMEOUT_VALUE); | |
1511 | ||
1512 | if (hpsb_node_write(scsi_id->ne, SBP2_BUSY_TIMEOUT_ADDRESS, &data, 4)) { | |
1513 | SBP2_ERR("sbp2_set_busy_timeout error"); | |
1514 | } | |
1515 | ||
1516 | return(0); | |
1517 | } | |
1518 | ||
1519 | ||
1520 | /* | |
1521 | * This function is called to parse sbp2 device's config rom unit | |
1522 | * directory. Used to determine things like sbp2 management agent offset, | |
1523 | * and command set used (SCSI or RBC). | |
1524 | */ | |
1525 | static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id, | |
1526 | struct unit_directory *ud) | |
1527 | { | |
1528 | struct csr1212_keyval *kv; | |
1529 | struct csr1212_dentry *dentry; | |
1530 | u64 management_agent_addr; | |
1531 | u32 command_set_spec_id, command_set, unit_characteristics, | |
1532 | firmware_revision, workarounds; | |
1533 | int i; | |
1534 | ||
1535 | SBP2_DEBUG("sbp2_parse_unit_directory"); | |
1536 | ||
1537 | management_agent_addr = 0x0; | |
1538 | command_set_spec_id = 0x0; | |
1539 | command_set = 0x0; | |
1540 | unit_characteristics = 0x0; | |
1541 | firmware_revision = 0x0; | |
1542 | ||
1543 | /* Handle different fields in the unit directory, based on keys */ | |
1544 | csr1212_for_each_dir_entry(ud->ne->csr, kv, ud->ud_kv, dentry) { | |
1545 | switch (kv->key.id) { | |
1546 | case CSR1212_KV_ID_DEPENDENT_INFO: | |
1547 | if (kv->key.type == CSR1212_KV_TYPE_CSR_OFFSET) { | |
1548 | /* Save off the management agent address */ | |
1549 | management_agent_addr = | |
1550 | CSR1212_REGISTER_SPACE_BASE + | |
1551 | (kv->value.csr_offset << 2); | |
1552 | ||
1553 | SBP2_DEBUG("sbp2_management_agent_addr = %x", | |
1554 | (unsigned int) management_agent_addr); | |
1555 | } else if (kv->key.type == CSR1212_KV_TYPE_IMMEDIATE) { | |
1556 | scsi_id->sbp2_device_type_and_lun = kv->value.immediate; | |
1557 | } | |
1558 | break; | |
1559 | ||
1560 | case SBP2_COMMAND_SET_SPEC_ID_KEY: | |
1561 | /* Command spec organization */ | |
1562 | command_set_spec_id = kv->value.immediate; | |
1563 | SBP2_DEBUG("sbp2_command_set_spec_id = %x", | |
1564 | (unsigned int) command_set_spec_id); | |
1565 | break; | |
1566 | ||
1567 | case SBP2_COMMAND_SET_KEY: | |
1568 | /* Command set used by sbp2 device */ | |
1569 | command_set = kv->value.immediate; | |
1570 | SBP2_DEBUG("sbp2_command_set = %x", | |
1571 | (unsigned int) command_set); | |
1572 | break; | |
1573 | ||
1574 | case SBP2_UNIT_CHARACTERISTICS_KEY: | |
1575 | /* | |
1576 | * Unit characterisitcs (orb related stuff | |
1577 | * that I'm not yet paying attention to) | |
1578 | */ | |
1579 | unit_characteristics = kv->value.immediate; | |
1580 | SBP2_DEBUG("sbp2_unit_characteristics = %x", | |
1581 | (unsigned int) unit_characteristics); | |
1582 | break; | |
1583 | ||
1584 | case SBP2_FIRMWARE_REVISION_KEY: | |
1585 | /* Firmware revision */ | |
1586 | firmware_revision = kv->value.immediate; | |
1587 | if (force_inquiry_hack) | |
1588 | SBP2_INFO("sbp2_firmware_revision = %x", | |
1589 | (unsigned int) firmware_revision); | |
1590 | else SBP2_DEBUG("sbp2_firmware_revision = %x", | |
1591 | (unsigned int) firmware_revision); | |
1592 | break; | |
1593 | ||
1594 | default: | |
1595 | break; | |
1596 | } | |
1597 | } | |
1598 | ||
1599 | /* This is the start of our broken device checking. We try to hack | |
1600 | * around oddities and known defects. */ | |
1601 | workarounds = 0x0; | |
1602 | ||
1603 | /* If the vendor id is 0xa0b8 (Symbios vendor id), then we have a | |
1604 | * bridge with 128KB max transfer size limitation. For sanity, we | |
1605 | * only voice this when the current max_sectors setting | |
1606 | * exceeds the 128k limit. By default, that is not the case. | |
1607 | * | |
1608 | * It would be really nice if we could detect this before the scsi | |
1609 | * host gets initialized. That way we can down-force the | |
1610 | * max_sectors to account for it. That is not currently | |
1611 | * possible. */ | |
1612 | if ((firmware_revision & 0xffff00) == | |
1613 | SBP2_128KB_BROKEN_FIRMWARE && | |
1614 | (max_sectors * 512) > (128*1024)) { | |
1615 | SBP2_WARN("Node " NODE_BUS_FMT ": Bridge only supports 128KB max transfer size.", | |
1616 | NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid)); | |
1617 | SBP2_WARN("WARNING: Current max_sectors setting is larger than 128KB (%d sectors)!", | |
1618 | max_sectors); | |
1619 | workarounds |= SBP2_BREAKAGE_128K_MAX_TRANSFER; | |
1620 | } | |
1621 | ||
1622 | /* Check for a blacklisted set of devices that require us to force | |
1623 | * a 36 byte host inquiry. This can be overriden as a module param | |
1624 | * (to force all hosts). */ | |
1625 | for (i = 0; i < NUM_BROKEN_INQUIRY_DEVS; i++) { | |
1626 | if ((firmware_revision & 0xffff00) == | |
1627 | sbp2_broken_inquiry_list[i]) { | |
1628 | SBP2_WARN("Node " NODE_BUS_FMT ": Using 36byte inquiry workaround", | |
1629 | NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid)); | |
1630 | workarounds |= SBP2_BREAKAGE_INQUIRY_HACK; | |
1631 | break; /* No need to continue. */ | |
1632 | } | |
1633 | } | |
1634 | ||
1635 | /* If this is a logical unit directory entry, process the parent | |
1636 | * to get the values. */ | |
1637 | if (ud->flags & UNIT_DIRECTORY_LUN_DIRECTORY) { | |
1638 | struct unit_directory *parent_ud = | |
1639 | container_of(ud->device.parent, struct unit_directory, device); | |
1640 | sbp2_parse_unit_directory(scsi_id, parent_ud); | |
1641 | } else { | |
1642 | scsi_id->sbp2_management_agent_addr = management_agent_addr; | |
1643 | scsi_id->sbp2_command_set_spec_id = command_set_spec_id; | |
1644 | scsi_id->sbp2_command_set = command_set; | |
1645 | scsi_id->sbp2_unit_characteristics = unit_characteristics; | |
1646 | scsi_id->sbp2_firmware_revision = firmware_revision; | |
1647 | scsi_id->workarounds = workarounds; | |
1648 | if (ud->flags & UNIT_DIRECTORY_HAS_LUN) | |
1649 | scsi_id->sbp2_device_type_and_lun = ud->lun; | |
1650 | } | |
1651 | } | |
1652 | ||
1653 | /* | |
1654 | * This function is called in order to determine the max speed and packet | |
1655 | * size we can use in our ORBs. Note, that we (the driver and host) only | |
1656 | * initiate the transaction. The SBP-2 device actually transfers the data | |
1657 | * (by reading from the DMA area we tell it). This means that the SBP-2 | |
1658 | * device decides the actual maximum data it can transfer. We just tell it | |
1659 | * the speed that it needs to use, and the max_rec the host supports, and | |
1660 | * it takes care of the rest. | |
1661 | */ | |
1662 | static int sbp2_max_speed_and_size(struct scsi_id_instance_data *scsi_id) | |
1663 | { | |
1664 | struct sbp2scsi_host_info *hi = scsi_id->hi; | |
1665 | ||
1666 | SBP2_DEBUG("sbp2_max_speed_and_size"); | |
1667 | ||
1668 | /* Initial setting comes from the hosts speed map */ | |
1669 | scsi_id->speed_code = hi->host->speed_map[NODEID_TO_NODE(hi->host->node_id) * 64 | |
1670 | + NODEID_TO_NODE(scsi_id->ne->nodeid)]; | |
1671 | ||
1672 | /* Bump down our speed if the user requested it */ | |
1673 | if (scsi_id->speed_code > max_speed) { | |
1674 | scsi_id->speed_code = max_speed; | |
1675 | SBP2_ERR("Forcing SBP-2 max speed down to %s", | |
1676 | hpsb_speedto_str[scsi_id->speed_code]); | |
1677 | } | |
1678 | ||
1679 | /* Payload size is the lesser of what our speed supports and what | |
1680 | * our host supports. */ | |
1681 | scsi_id->max_payload_size = min(sbp2_speedto_max_payload[scsi_id->speed_code], | |
1682 | (u8)(hi->host->csr.max_rec - 1)); | |
1683 | ||
1684 | HPSB_DEBUG("Node " NODE_BUS_FMT ": Max speed [%s] - Max payload [%u]", | |
1685 | NODE_BUS_ARGS(hi->host, scsi_id->ne->nodeid), | |
1686 | hpsb_speedto_str[scsi_id->speed_code], | |
1687 | 1 << ((u32)scsi_id->max_payload_size + 2)); | |
1688 | ||
1689 | return(0); | |
1690 | } | |
1691 | ||
1692 | /* | |
1693 | * This function is called in order to perform a SBP-2 agent reset. | |
1694 | */ | |
1695 | static int sbp2_agent_reset(struct scsi_id_instance_data *scsi_id, int wait) | |
1696 | { | |
1697 | quadlet_t data; | |
1698 | u64 addr; | |
1699 | int retval; | |
1700 | ||
1701 | SBP2_DEBUG("sbp2_agent_reset"); | |
1702 | ||
1703 | /* | |
1704 | * Ok, let's write to the target's management agent register | |
1705 | */ | |
1706 | data = ntohl(SBP2_AGENT_RESET_DATA); | |
1707 | addr = scsi_id->sbp2_command_block_agent_addr + SBP2_AGENT_RESET_OFFSET; | |
1708 | ||
1709 | if (wait) | |
1710 | retval = hpsb_node_write(scsi_id->ne, addr, &data, 4); | |
1711 | else | |
1712 | retval = sbp2util_node_write_no_wait(scsi_id->ne, addr, &data, 4); | |
1713 | ||
1714 | if (retval < 0) { | |
1715 | SBP2_ERR("hpsb_node_write failed.\n"); | |
1716 | return -EIO; | |
1717 | } | |
1718 | ||
1719 | /* | |
1720 | * Need to make sure orb pointer is written on next command | |
1721 | */ | |
1722 | scsi_id->last_orb = NULL; | |
1723 | ||
1724 | return(0); | |
1725 | } | |
1726 | ||
1727 | /* | |
1728 | * This function is called to create the actual command orb and s/g list | |
1729 | * out of the scsi command itself. | |
1730 | */ | |
1731 | static int sbp2_create_command_orb(struct scsi_id_instance_data *scsi_id, | |
1732 | struct sbp2_command_info *command, | |
1733 | unchar *scsi_cmd, | |
1734 | unsigned int scsi_use_sg, | |
1735 | unsigned int scsi_request_bufflen, | |
1736 | void *scsi_request_buffer, | |
1737 | enum dma_data_direction dma_dir) | |
1738 | ||
1739 | { | |
1740 | struct sbp2scsi_host_info *hi = scsi_id->hi; | |
1741 | struct scatterlist *sgpnt = (struct scatterlist *) scsi_request_buffer; | |
1742 | struct sbp2_command_orb *command_orb = &command->command_orb; | |
1743 | struct sbp2_unrestricted_page_table *scatter_gather_element = | |
1744 | &command->scatter_gather_element[0]; | |
1745 | u32 sg_count, sg_len, orb_direction; | |
1746 | dma_addr_t sg_addr; | |
1747 | int i; | |
1748 | ||
1749 | /* | |
1750 | * Set-up our command ORB.. | |
1751 | * | |
1752 | * NOTE: We're doing unrestricted page tables (s/g), as this is | |
1753 | * best performance (at least with the devices I have). This means | |
1754 | * that data_size becomes the number of s/g elements, and | |
1755 | * page_size should be zero (for unrestricted). | |
1756 | */ | |
1757 | command_orb->next_ORB_hi = ORB_SET_NULL_PTR(1); | |
1758 | command_orb->next_ORB_lo = 0x0; | |
1759 | command_orb->misc = ORB_SET_MAX_PAYLOAD(scsi_id->max_payload_size); | |
1760 | command_orb->misc |= ORB_SET_SPEED(scsi_id->speed_code); | |
1761 | command_orb->misc |= ORB_SET_NOTIFY(1); /* Notify us when complete */ | |
1762 | ||
1763 | /* | |
1764 | * Get the direction of the transfer. If the direction is unknown, then use our | |
1765 | * goofy table as a back-up. | |
1766 | */ | |
1767 | switch (dma_dir) { | |
1768 | case DMA_NONE: | |
1769 | orb_direction = ORB_DIRECTION_NO_DATA_TRANSFER; | |
1770 | break; | |
1771 | case DMA_TO_DEVICE: | |
1772 | orb_direction = ORB_DIRECTION_WRITE_TO_MEDIA; | |
1773 | break; | |
1774 | case DMA_FROM_DEVICE: | |
1775 | orb_direction = ORB_DIRECTION_READ_FROM_MEDIA; | |
1776 | break; | |
1777 | case DMA_BIDIRECTIONAL: | |
1778 | default: | |
1779 | SBP2_ERR("SCSI data transfer direction not specified. " | |
1780 | "Update the SBP2 direction table in sbp2.h if " | |
1781 | "necessary for your application"); | |
1782 | __scsi_print_command(scsi_cmd); | |
1783 | orb_direction = sbp2scsi_direction_table[*scsi_cmd]; | |
1784 | break; | |
1785 | } | |
1786 | ||
1787 | /* | |
1788 | * Set-up our pagetable stuff... unfortunately, this has become | |
1789 | * messier than I'd like. Need to clean this up a bit. ;-) | |
1790 | */ | |
1791 | if (orb_direction == ORB_DIRECTION_NO_DATA_TRANSFER) { | |
1792 | ||
1793 | SBP2_DEBUG("No data transfer"); | |
1794 | ||
1795 | /* | |
1796 | * Handle no data transfer | |
1797 | */ | |
1798 | command_orb->data_descriptor_hi = 0x0; | |
1799 | command_orb->data_descriptor_lo = 0x0; | |
1800 | command_orb->misc |= ORB_SET_DIRECTION(1); | |
1801 | ||
1802 | } else if (scsi_use_sg) { | |
1803 | ||
1804 | SBP2_DEBUG("Use scatter/gather"); | |
1805 | ||
1806 | /* | |
1807 | * Special case if only one element (and less than 64KB in size) | |
1808 | */ | |
1809 | if ((scsi_use_sg == 1) && (sgpnt[0].length <= SBP2_MAX_SG_ELEMENT_LENGTH)) { | |
1810 | ||
1811 | SBP2_DEBUG("Only one s/g element"); | |
1812 | command->dma_dir = dma_dir; | |
1813 | command->dma_size = sgpnt[0].length; | |
1814 | command->dma_type = CMD_DMA_PAGE; | |
1815 | command->cmd_dma = pci_map_page(hi->host->pdev, | |
1816 | sgpnt[0].page, | |
1817 | sgpnt[0].offset, | |
1818 | command->dma_size, | |
1819 | command->dma_dir); | |
1820 | SBP2_DMA_ALLOC("single page scatter element"); | |
1821 | ||
1822 | command_orb->data_descriptor_hi = ORB_SET_NODE_ID(hi->host->node_id); | |
1823 | command_orb->data_descriptor_lo = command->cmd_dma; | |
1824 | command_orb->misc |= ORB_SET_DATA_SIZE(command->dma_size); | |
1825 | command_orb->misc |= ORB_SET_DIRECTION(orb_direction); | |
1826 | ||
1827 | } else { | |
1828 | int count = pci_map_sg(hi->host->pdev, sgpnt, scsi_use_sg, dma_dir); | |
1829 | SBP2_DMA_ALLOC("scatter list"); | |
1830 | ||
1831 | command->dma_size = scsi_use_sg; | |
1832 | command->dma_dir = dma_dir; | |
1833 | command->sge_buffer = sgpnt; | |
1834 | ||
1835 | /* use page tables (s/g) */ | |
1836 | command_orb->misc |= ORB_SET_PAGE_TABLE_PRESENT(0x1); | |
1837 | command_orb->misc |= ORB_SET_DIRECTION(orb_direction); | |
1838 | command_orb->data_descriptor_hi = ORB_SET_NODE_ID(hi->host->node_id); | |
1839 | command_orb->data_descriptor_lo = command->sge_dma; | |
1840 | ||
1841 | /* | |
1842 | * Loop through and fill out our sbp-2 page tables | |
1843 | * (and split up anything too large) | |
1844 | */ | |
1845 | for (i = 0, sg_count = 0 ; i < count; i++, sgpnt++) { | |
1846 | sg_len = sg_dma_len(sgpnt); | |
1847 | sg_addr = sg_dma_address(sgpnt); | |
1848 | while (sg_len) { | |
1849 | scatter_gather_element[sg_count].segment_base_lo = sg_addr; | |
1850 | if (sg_len > SBP2_MAX_SG_ELEMENT_LENGTH) { | |
1851 | scatter_gather_element[sg_count].length_segment_base_hi = | |
1852 | PAGE_TABLE_SET_SEGMENT_LENGTH(SBP2_MAX_SG_ELEMENT_LENGTH); | |
1853 | sg_addr += SBP2_MAX_SG_ELEMENT_LENGTH; | |
1854 | sg_len -= SBP2_MAX_SG_ELEMENT_LENGTH; | |
1855 | } else { | |
1856 | scatter_gather_element[sg_count].length_segment_base_hi = | |
1857 | PAGE_TABLE_SET_SEGMENT_LENGTH(sg_len); | |
1858 | sg_len = 0; | |
1859 | } | |
1860 | sg_count++; | |
1861 | } | |
1862 | } | |
1863 | ||
1864 | /* Number of page table (s/g) elements */ | |
1865 | command_orb->misc |= ORB_SET_DATA_SIZE(sg_count); | |
1866 | ||
1867 | sbp2util_packet_dump(scatter_gather_element, | |
1868 | (sizeof(struct sbp2_unrestricted_page_table)) * sg_count, | |
1869 | "sbp2 s/g list", command->sge_dma); | |
1870 | ||
1871 | /* | |
1872 | * Byte swap page tables if necessary | |
1873 | */ | |
1874 | sbp2util_cpu_to_be32_buffer(scatter_gather_element, | |
1875 | (sizeof(struct sbp2_unrestricted_page_table)) * | |
1876 | sg_count); | |
1877 | ||
1878 | } | |
1879 | ||
1880 | } else { | |
1881 | ||
1882 | SBP2_DEBUG("No scatter/gather"); | |
1883 | ||
1884 | command->dma_dir = dma_dir; | |
1885 | command->dma_size = scsi_request_bufflen; | |
1886 | command->dma_type = CMD_DMA_SINGLE; | |
1887 | command->cmd_dma = pci_map_single (hi->host->pdev, scsi_request_buffer, | |
1888 | command->dma_size, | |
1889 | command->dma_dir); | |
1890 | SBP2_DMA_ALLOC("single bulk"); | |
1891 | ||
1892 | /* | |
1893 | * Handle case where we get a command w/o s/g enabled (but | |
1894 | * check for transfers larger than 64K) | |
1895 | */ | |
1896 | if (scsi_request_bufflen <= SBP2_MAX_SG_ELEMENT_LENGTH) { | |
1897 | ||
1898 | command_orb->data_descriptor_hi = ORB_SET_NODE_ID(hi->host->node_id); | |
1899 | command_orb->data_descriptor_lo = command->cmd_dma; | |
1900 | command_orb->misc |= ORB_SET_DATA_SIZE(scsi_request_bufflen); | |
1901 | command_orb->misc |= ORB_SET_DIRECTION(orb_direction); | |
1902 | ||
1903 | /* | |
1904 | * Sanity, in case our direction table is not | |
1905 | * up-to-date | |
1906 | */ | |
1907 | if (!scsi_request_bufflen) { | |
1908 | command_orb->data_descriptor_hi = 0x0; | |
1909 | command_orb->data_descriptor_lo = 0x0; | |
1910 | command_orb->misc |= ORB_SET_DIRECTION(1); | |
1911 | } | |
1912 | ||
1913 | } else { | |
1914 | /* | |
1915 | * Need to turn this into page tables, since the | |
1916 | * buffer is too large. | |
1917 | */ | |
1918 | command_orb->data_descriptor_hi = ORB_SET_NODE_ID(hi->host->node_id); | |
1919 | command_orb->data_descriptor_lo = command->sge_dma; | |
1920 | ||
1921 | /* Use page tables (s/g) */ | |
1922 | command_orb->misc |= ORB_SET_PAGE_TABLE_PRESENT(0x1); | |
1923 | command_orb->misc |= ORB_SET_DIRECTION(orb_direction); | |
1924 | ||
1925 | /* | |
1926 | * fill out our sbp-2 page tables (and split up | |
1927 | * the large buffer) | |
1928 | */ | |
1929 | sg_count = 0; | |
1930 | sg_len = scsi_request_bufflen; | |
1931 | sg_addr = command->cmd_dma; | |
1932 | while (sg_len) { | |
1933 | scatter_gather_element[sg_count].segment_base_lo = sg_addr; | |
1934 | if (sg_len > SBP2_MAX_SG_ELEMENT_LENGTH) { | |
1935 | scatter_gather_element[sg_count].length_segment_base_hi = | |
1936 | PAGE_TABLE_SET_SEGMENT_LENGTH(SBP2_MAX_SG_ELEMENT_LENGTH); | |
1937 | sg_addr += SBP2_MAX_SG_ELEMENT_LENGTH; | |
1938 | sg_len -= SBP2_MAX_SG_ELEMENT_LENGTH; | |
1939 | } else { | |
1940 | scatter_gather_element[sg_count].length_segment_base_hi = | |
1941 | PAGE_TABLE_SET_SEGMENT_LENGTH(sg_len); | |
1942 | sg_len = 0; | |
1943 | } | |
1944 | sg_count++; | |
1945 | } | |
1946 | ||
1947 | /* Number of page table (s/g) elements */ | |
1948 | command_orb->misc |= ORB_SET_DATA_SIZE(sg_count); | |
1949 | ||
1950 | sbp2util_packet_dump(scatter_gather_element, | |
1951 | (sizeof(struct sbp2_unrestricted_page_table)) * sg_count, | |
1952 | "sbp2 s/g list", command->sge_dma); | |
1953 | ||
1954 | /* | |
1955 | * Byte swap page tables if necessary | |
1956 | */ | |
1957 | sbp2util_cpu_to_be32_buffer(scatter_gather_element, | |
1958 | (sizeof(struct sbp2_unrestricted_page_table)) * | |
1959 | sg_count); | |
1960 | ||
1961 | } | |
1962 | ||
1963 | } | |
1964 | ||
1965 | /* | |
1966 | * Byte swap command ORB if necessary | |
1967 | */ | |
1968 | sbp2util_cpu_to_be32_buffer(command_orb, sizeof(struct sbp2_command_orb)); | |
1969 | ||
1970 | /* | |
1971 | * Put our scsi command in the command ORB | |
1972 | */ | |
1973 | memset(command_orb->cdb, 0, 12); | |
1974 | memcpy(command_orb->cdb, scsi_cmd, COMMAND_SIZE(*scsi_cmd)); | |
1975 | ||
1976 | return(0); | |
1977 | } | |
1978 | ||
1979 | /* | |
1980 | * This function is called in order to begin a regular SBP-2 command. | |
1981 | */ | |
1982 | static int sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id, | |
1983 | struct sbp2_command_info *command) | |
1984 | { | |
1985 | struct sbp2scsi_host_info *hi = scsi_id->hi; | |
1986 | struct sbp2_command_orb *command_orb = &command->command_orb; | |
1987 | struct node_entry *ne = scsi_id->ne; | |
1988 | u64 addr; | |
1989 | ||
1990 | outstanding_orb_incr; | |
1991 | SBP2_ORB_DEBUG("sending command orb %p, total orbs = %x", | |
1992 | command_orb, global_outstanding_command_orbs); | |
1993 | ||
1994 | pci_dma_sync_single_for_device(hi->host->pdev, command->command_orb_dma, | |
1995 | sizeof(struct sbp2_command_orb), | |
1996 | PCI_DMA_BIDIRECTIONAL); | |
1997 | pci_dma_sync_single_for_device(hi->host->pdev, command->sge_dma, | |
1998 | sizeof(command->scatter_gather_element), | |
1999 | PCI_DMA_BIDIRECTIONAL); | |
2000 | /* | |
2001 | * Check to see if there are any previous orbs to use | |
2002 | */ | |
2003 | if (scsi_id->last_orb == NULL) { | |
2004 | quadlet_t data[2]; | |
2005 | ||
2006 | /* | |
2007 | * Ok, let's write to the target's management agent register | |
2008 | */ | |
2009 | addr = scsi_id->sbp2_command_block_agent_addr + SBP2_ORB_POINTER_OFFSET; | |
2010 | data[0] = ORB_SET_NODE_ID(hi->host->node_id); | |
2011 | data[1] = command->command_orb_dma; | |
2012 | sbp2util_cpu_to_be32_buffer(data, 8); | |
2013 | ||
2014 | SBP2_ORB_DEBUG("write command agent, command orb %p", command_orb); | |
2015 | ||
2016 | if (sbp2util_node_write_no_wait(ne, addr, data, 8) < 0) { | |
2017 | SBP2_ERR("sbp2util_node_write_no_wait failed.\n"); | |
2018 | return -EIO; | |
2019 | } | |
2020 | ||
2021 | SBP2_ORB_DEBUG("write command agent complete"); | |
2022 | ||
2023 | scsi_id->last_orb = command_orb; | |
2024 | scsi_id->last_orb_dma = command->command_orb_dma; | |
2025 | ||
2026 | } else { | |
2027 | quadlet_t data; | |
2028 | ||
2029 | /* | |
2030 | * We have an orb already sent (maybe or maybe not | |
2031 | * processed) that we can append this orb to. So do so, | |
2032 | * and ring the doorbell. Have to be very careful | |
2033 | * modifying these next orb pointers, as they are accessed | |
2034 | * both by the sbp2 device and us. | |
2035 | */ | |
2036 | scsi_id->last_orb->next_ORB_lo = | |
2037 | cpu_to_be32(command->command_orb_dma); | |
2038 | /* Tells hardware that this pointer is valid */ | |
2039 | scsi_id->last_orb->next_ORB_hi = 0x0; | |
2040 | pci_dma_sync_single_for_device(hi->host->pdev, scsi_id->last_orb_dma, | |
2041 | sizeof(struct sbp2_command_orb), | |
2042 | PCI_DMA_BIDIRECTIONAL); | |
2043 | ||
2044 | /* | |
2045 | * Ring the doorbell | |
2046 | */ | |
2047 | data = cpu_to_be32(command->command_orb_dma); | |
2048 | addr = scsi_id->sbp2_command_block_agent_addr + SBP2_DOORBELL_OFFSET; | |
2049 | ||
2050 | SBP2_ORB_DEBUG("ring doorbell, command orb %p", command_orb); | |
2051 | ||
2052 | if (sbp2util_node_write_no_wait(ne, addr, &data, 4) < 0) { | |
2053 | SBP2_ERR("sbp2util_node_write_no_wait failed"); | |
2054 | return(-EIO); | |
2055 | } | |
2056 | ||
2057 | scsi_id->last_orb = command_orb; | |
2058 | scsi_id->last_orb_dma = command->command_orb_dma; | |
2059 | ||
2060 | } | |
2061 | return(0); | |
2062 | } | |
2063 | ||
2064 | /* | |
2065 | * This function is called in order to begin a regular SBP-2 command. | |
2066 | */ | |
2067 | static int sbp2_send_command(struct scsi_id_instance_data *scsi_id, | |
2068 | struct scsi_cmnd *SCpnt, | |
2069 | void (*done)(struct scsi_cmnd *)) | |
2070 | { | |
2071 | unchar *cmd = (unchar *) SCpnt->cmnd; | |
2072 | unsigned int request_bufflen = SCpnt->request_bufflen; | |
2073 | struct sbp2_command_info *command; | |
2074 | ||
2075 | SBP2_DEBUG("sbp2_send_command"); | |
2076 | #if (CONFIG_IEEE1394_SBP2_DEBUG >= 2) || defined(CONFIG_IEEE1394_SBP2_PACKET_DUMP) | |
2077 | printk("[scsi command]\n "); | |
2078 | scsi_print_command(SCpnt); | |
2079 | #endif | |
2080 | SBP2_DEBUG("SCSI transfer size = %x", request_bufflen); | |
2081 | SBP2_DEBUG("SCSI s/g elements = %x", (unsigned int)SCpnt->use_sg); | |
2082 | ||
2083 | /* | |
2084 | * Allocate a command orb and s/g structure | |
2085 | */ | |
2086 | command = sbp2util_allocate_command_orb(scsi_id, SCpnt, done); | |
2087 | if (!command) { | |
2088 | return(-EIO); | |
2089 | } | |
2090 | ||
2091 | /* | |
2092 | * The scsi stack sends down a request_bufflen which does not match the | |
2093 | * length field in the scsi cdb. This causes some sbp2 devices to | |
2094 | * reject this inquiry command. Fix the request_bufflen. | |
2095 | */ | |
2096 | if (*cmd == INQUIRY) { | |
2097 | if (force_inquiry_hack || scsi_id->workarounds & SBP2_BREAKAGE_INQUIRY_HACK) | |
2098 | request_bufflen = cmd[4] = 0x24; | |
2099 | else | |
2100 | request_bufflen = cmd[4]; | |
2101 | } | |
2102 | ||
2103 | /* | |
2104 | * Now actually fill in the comamnd orb and sbp2 s/g list | |
2105 | */ | |
2106 | sbp2_create_command_orb(scsi_id, command, cmd, SCpnt->use_sg, | |
2107 | request_bufflen, SCpnt->request_buffer, | |
2108 | SCpnt->sc_data_direction); | |
2109 | /* | |
2110 | * Update our cdb if necessary (to handle sbp2 RBC command set | |
2111 | * differences). This is where the command set hacks go! =) | |
2112 | */ | |
2113 | sbp2_check_sbp2_command(scsi_id, command->command_orb.cdb); | |
2114 | ||
2115 | sbp2util_packet_dump(&command->command_orb, sizeof(struct sbp2_command_orb), | |
2116 | "sbp2 command orb", command->command_orb_dma); | |
2117 | ||
2118 | /* | |
2119 | * Initialize status fifo | |
2120 | */ | |
2121 | memset(&scsi_id->status_block, 0, sizeof(struct sbp2_status_block)); | |
2122 | ||
2123 | /* | |
2124 | * Link up the orb, and ring the doorbell if needed | |
2125 | */ | |
2126 | sbp2_link_orb_command(scsi_id, command); | |
2127 | ||
2128 | return(0); | |
2129 | } | |
2130 | ||
2131 | ||
2132 | /* | |
2133 | * This function deals with command set differences between Linux scsi | |
2134 | * command set and sbp2 RBC command set. | |
2135 | */ | |
2136 | static void sbp2_check_sbp2_command(struct scsi_id_instance_data *scsi_id, unchar *cmd) | |
2137 | { | |
1934b8b6 BC |
2138 | unchar new_cmd[16]; |
2139 | u8 device_type = SBP2_DEVICE_TYPE (scsi_id->sbp2_device_type_and_lun); | |
2140 | ||
2141 | SBP2_DEBUG("sbp2_check_sbp2_command"); | |
2142 | ||
2143 | switch (*cmd) { | |
2144 | ||
2145 | case READ_6: | |
2146 | ||
2147 | if (sbp2_command_conversion_device_type(device_type)) { | |
2148 | ||
2149 | SBP2_DEBUG("Convert READ_6 to READ_10"); | |
2150 | ||
2151 | /* | |
2152 | * Need to turn read_6 into read_10 | |
2153 | */ | |
2154 | new_cmd[0] = 0x28; | |
2155 | new_cmd[1] = (cmd[1] & 0xe0); | |
2156 | new_cmd[2] = 0x0; | |
2157 | new_cmd[3] = (cmd[1] & 0x1f); | |
2158 | new_cmd[4] = cmd[2]; | |
2159 | new_cmd[5] = cmd[3]; | |
2160 | new_cmd[6] = 0x0; | |
2161 | new_cmd[7] = 0x0; | |
2162 | new_cmd[8] = cmd[4]; | |
2163 | new_cmd[9] = cmd[5]; | |
2164 | ||
2165 | memcpy(cmd, new_cmd, 10); | |
2166 | ||
2167 | } | |
2168 | ||
2169 | break; | |
2170 | ||
2171 | case WRITE_6: | |
2172 | ||
2173 | if (sbp2_command_conversion_device_type(device_type)) { | |
2174 | ||
2175 | SBP2_DEBUG("Convert WRITE_6 to WRITE_10"); | |
2176 | ||
2177 | /* | |
2178 | * Need to turn write_6 into write_10 | |
2179 | */ | |
2180 | new_cmd[0] = 0x2a; | |
2181 | new_cmd[1] = (cmd[1] & 0xe0); | |
2182 | new_cmd[2] = 0x0; | |
2183 | new_cmd[3] = (cmd[1] & 0x1f); | |
2184 | new_cmd[4] = cmd[2]; | |
2185 | new_cmd[5] = cmd[3]; | |
2186 | new_cmd[6] = 0x0; | |
2187 | new_cmd[7] = 0x0; | |
2188 | new_cmd[8] = cmd[4]; | |
2189 | new_cmd[9] = cmd[5]; | |
2190 | ||
2191 | memcpy(cmd, new_cmd, 10); | |
2192 | ||
2193 | } | |
2194 | ||
2195 | break; | |
2196 | ||
2197 | case MODE_SENSE: | |
2198 | ||
2199 | if (sbp2_command_conversion_device_type(device_type)) { | |
2200 | ||
2201 | SBP2_DEBUG("Convert MODE_SENSE_6 to MODE_SENSE_10"); | |
2202 | ||
2203 | /* | |
2204 | * Need to turn mode_sense_6 into mode_sense_10 | |
2205 | */ | |
2206 | new_cmd[0] = 0x5a; | |
2207 | new_cmd[1] = cmd[1]; | |
2208 | new_cmd[2] = cmd[2]; | |
2209 | new_cmd[3] = 0x0; | |
2210 | new_cmd[4] = 0x0; | |
2211 | new_cmd[5] = 0x0; | |
2212 | new_cmd[6] = 0x0; | |
2213 | new_cmd[7] = 0x0; | |
2214 | new_cmd[8] = cmd[4]; | |
2215 | new_cmd[9] = cmd[5]; | |
2216 | ||
2217 | memcpy(cmd, new_cmd, 10); | |
2218 | ||
2219 | } | |
2220 | ||
2221 | break; | |
2222 | ||
2223 | case MODE_SELECT: | |
2224 | ||
2225 | /* | |
2226 | * TODO. Probably need to change mode select to 10 byte version | |
2227 | */ | |
2228 | ||
2229 | default: | |
2230 | break; | |
2231 | } | |
2232 | ||
2233 | return; | |
1da177e4 LT |
2234 | } |
2235 | ||
2236 | /* | |
2237 | * Translates SBP-2 status into SCSI sense data for check conditions | |
2238 | */ | |
2239 | static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, unchar *sense_data) | |
2240 | { | |
2241 | SBP2_DEBUG("sbp2_status_to_sense_data"); | |
2242 | ||
2243 | /* | |
2244 | * Ok, it's pretty ugly... ;-) | |
2245 | */ | |
2246 | sense_data[0] = 0x70; | |
2247 | sense_data[1] = 0x0; | |
2248 | sense_data[2] = sbp2_status[9]; | |
2249 | sense_data[3] = sbp2_status[12]; | |
2250 | sense_data[4] = sbp2_status[13]; | |
2251 | sense_data[5] = sbp2_status[14]; | |
2252 | sense_data[6] = sbp2_status[15]; | |
2253 | sense_data[7] = 10; | |
2254 | sense_data[8] = sbp2_status[16]; | |
2255 | sense_data[9] = sbp2_status[17]; | |
2256 | sense_data[10] = sbp2_status[18]; | |
2257 | sense_data[11] = sbp2_status[19]; | |
2258 | sense_data[12] = sbp2_status[10]; | |
2259 | sense_data[13] = sbp2_status[11]; | |
2260 | sense_data[14] = sbp2_status[20]; | |
2261 | sense_data[15] = sbp2_status[21]; | |
2262 | ||
2263 | return(sbp2_status[8] & 0x3f); /* return scsi status */ | |
2264 | } | |
2265 | ||
2266 | /* | |
2267 | * This function is called after a command is completed, in order to do any necessary SBP-2 | |
2268 | * response data translations for the SCSI stack | |
2269 | */ | |
2270 | static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id, | |
2271 | struct scsi_cmnd *SCpnt) | |
2272 | { | |
2273 | u8 *scsi_buf = SCpnt->request_buffer; | |
1934b8b6 | 2274 | u8 device_type = SBP2_DEVICE_TYPE (scsi_id->sbp2_device_type_and_lun); |
1da177e4 LT |
2275 | |
2276 | SBP2_DEBUG("sbp2_check_sbp2_response"); | |
2277 | ||
2278 | switch (SCpnt->cmnd[0]) { | |
2279 | ||
2280 | case INQUIRY: | |
2281 | ||
2282 | /* | |
2283 | * If scsi_id->sbp2_device_type_and_lun is uninitialized, then fill | |
2284 | * this information in from the inquiry response data. Lun is set to zero. | |
2285 | */ | |
2286 | if (scsi_id->sbp2_device_type_and_lun == SBP2_DEVICE_TYPE_LUN_UNINITIALIZED) { | |
2287 | SBP2_DEBUG("Creating sbp2_device_type_and_lun from scsi inquiry data"); | |
2288 | scsi_id->sbp2_device_type_and_lun = (scsi_buf[0] & 0x1f) << 16; | |
2289 | } | |
2290 | ||
2291 | /* | |
2292 | * Make sure data length is ok. Minimum length is 36 bytes | |
2293 | */ | |
2294 | if (scsi_buf[4] == 0) { | |
2295 | scsi_buf[4] = 36 - 5; | |
2296 | } | |
2297 | ||
1934b8b6 BC |
2298 | /* |
2299 | * Check for Simple Direct Access Device and change it to TYPE_DISK | |
2300 | */ | |
2301 | if ((scsi_buf[0] & 0x1f) == TYPE_RBC) { | |
2302 | SBP2_DEBUG("Changing TYPE_RBC to TYPE_DISK"); | |
2303 | scsi_buf[0] &= 0xe0; | |
2304 | } | |
2305 | ||
1da177e4 LT |
2306 | /* |
2307 | * Fix ansi revision and response data format | |
2308 | */ | |
2309 | scsi_buf[2] |= 2; | |
2310 | scsi_buf[3] = (scsi_buf[3] & 0xf0) | 2; | |
2311 | ||
2312 | break; | |
2313 | ||
1934b8b6 BC |
2314 | case MODE_SENSE: |
2315 | ||
2316 | if (sbp2_command_conversion_device_type(device_type)) { | |
2317 | ||
2318 | SBP2_DEBUG("Modify mode sense response (10 byte version)"); | |
2319 | ||
2320 | scsi_buf[0] = scsi_buf[1]; /* Mode data length */ | |
2321 | scsi_buf[1] = scsi_buf[2]; /* Medium type */ | |
2322 | scsi_buf[2] = scsi_buf[3]; /* Device specific parameter */ | |
2323 | scsi_buf[3] = scsi_buf[7]; /* Block descriptor length */ | |
2324 | memcpy(scsi_buf + 4, scsi_buf + 8, scsi_buf[0]); | |
2325 | } | |
2326 | ||
2327 | break; | |
2328 | ||
2329 | case MODE_SELECT: | |
2330 | ||
2331 | /* | |
2332 | * TODO. Probably need to change mode select to 10 byte version | |
2333 | */ | |
2334 | ||
1da177e4 LT |
2335 | default: |
2336 | break; | |
2337 | } | |
2338 | return; | |
2339 | } | |
2340 | ||
2341 | /* | |
2342 | * This function deals with status writes from the SBP-2 device | |
2343 | */ | |
2344 | static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int destid, | |
2345 | quadlet_t *data, u64 addr, size_t length, u16 fl) | |
2346 | { | |
2347 | struct sbp2scsi_host_info *hi; | |
2348 | struct scsi_id_instance_data *scsi_id = NULL, *scsi_id_tmp; | |
2349 | u32 id; | |
2350 | struct scsi_cmnd *SCpnt = NULL; | |
2351 | u32 scsi_status = SBP2_SCSI_STATUS_GOOD; | |
2352 | struct sbp2_command_info *command; | |
2353 | ||
2354 | SBP2_DEBUG("sbp2_handle_status_write"); | |
2355 | ||
2356 | sbp2util_packet_dump(data, length, "sbp2 status write by device", (u32)addr); | |
2357 | ||
2358 | if (!host) { | |
2359 | SBP2_ERR("host is NULL - this is bad!"); | |
2360 | return(RCODE_ADDRESS_ERROR); | |
2361 | } | |
2362 | ||
2363 | hi = hpsb_get_hostinfo(&sbp2_highlevel, host); | |
2364 | ||
2365 | if (!hi) { | |
2366 | SBP2_ERR("host info is NULL - this is bad!"); | |
2367 | return(RCODE_ADDRESS_ERROR); | |
2368 | } | |
2369 | ||
2370 | /* | |
2371 | * Find our scsi_id structure by looking at the status fifo address written to by | |
2372 | * the sbp2 device. | |
2373 | */ | |
2374 | id = SBP2_STATUS_FIFO_OFFSET_TO_ENTRY((u32)(addr - SBP2_STATUS_FIFO_ADDRESS)); | |
2375 | list_for_each_entry(scsi_id_tmp, &hi->scsi_ids, scsi_list) { | |
2376 | if (scsi_id_tmp->ne->nodeid == nodeid && scsi_id_tmp->ud->id == id) { | |
2377 | scsi_id = scsi_id_tmp; | |
2378 | break; | |
2379 | } | |
2380 | } | |
2381 | ||
2382 | if (!scsi_id) { | |
2383 | SBP2_ERR("scsi_id is NULL - device is gone?"); | |
2384 | return(RCODE_ADDRESS_ERROR); | |
2385 | } | |
2386 | ||
2387 | /* | |
2388 | * Put response into scsi_id status fifo... | |
2389 | */ | |
2390 | memcpy(&scsi_id->status_block, data, length); | |
2391 | ||
2392 | /* | |
2393 | * Byte swap first two quadlets (8 bytes) of status for processing | |
2394 | */ | |
2395 | sbp2util_be32_to_cpu_buffer(&scsi_id->status_block, 8); | |
2396 | ||
2397 | /* | |
2398 | * Handle command ORB status here if necessary. First, need to match status with command. | |
2399 | */ | |
2400 | command = sbp2util_find_command_for_orb(scsi_id, scsi_id->status_block.ORB_offset_lo); | |
2401 | if (command) { | |
2402 | ||
2403 | SBP2_DEBUG("Found status for command ORB"); | |
2404 | pci_dma_sync_single_for_cpu(hi->host->pdev, command->command_orb_dma, | |
2405 | sizeof(struct sbp2_command_orb), | |
2406 | PCI_DMA_BIDIRECTIONAL); | |
2407 | pci_dma_sync_single_for_cpu(hi->host->pdev, command->sge_dma, | |
2408 | sizeof(command->scatter_gather_element), | |
2409 | PCI_DMA_BIDIRECTIONAL); | |
2410 | ||
2411 | SBP2_ORB_DEBUG("matched command orb %p", &command->command_orb); | |
2412 | outstanding_orb_decr; | |
2413 | ||
2414 | /* | |
2415 | * Matched status with command, now grab scsi command pointers and check status | |
2416 | */ | |
2417 | SCpnt = command->Current_SCpnt; | |
2418 | sbp2util_mark_command_completed(scsi_id, command); | |
2419 | ||
2420 | if (SCpnt) { | |
2421 | ||
2422 | /* | |
2423 | * See if the target stored any scsi status information | |
2424 | */ | |
2425 | if (STATUS_GET_LENGTH(scsi_id->status_block.ORB_offset_hi_misc) > 1) { | |
2426 | /* | |
2427 | * Translate SBP-2 status to SCSI sense data | |
2428 | */ | |
2429 | SBP2_DEBUG("CHECK CONDITION"); | |
2430 | scsi_status = sbp2_status_to_sense_data((unchar *)&scsi_id->status_block, SCpnt->sense_buffer); | |
2431 | } | |
2432 | ||
2433 | /* | |
2434 | * Check to see if the dead bit is set. If so, we'll have to initiate | |
2435 | * a fetch agent reset. | |
2436 | */ | |
2437 | if (STATUS_GET_DEAD_BIT(scsi_id->status_block.ORB_offset_hi_misc)) { | |
2438 | ||
2439 | /* | |
2440 | * Initiate a fetch agent reset. | |
2441 | */ | |
2442 | SBP2_DEBUG("Dead bit set - initiating fetch agent reset"); | |
2443 | sbp2_agent_reset(scsi_id, 0); | |
2444 | } | |
2445 | ||
2446 | SBP2_ORB_DEBUG("completing command orb %p", &command->command_orb); | |
2447 | } | |
2448 | ||
2449 | /* | |
2450 | * Check here to see if there are no commands in-use. If there are none, we can | |
2451 | * null out last orb so that next time around we write directly to the orb pointer... | |
2452 | * Quick start saves one 1394 bus transaction. | |
2453 | */ | |
2454 | if (list_empty(&scsi_id->sbp2_command_orb_inuse)) { | |
2455 | scsi_id->last_orb = NULL; | |
2456 | } | |
2457 | ||
2458 | } else { | |
2459 | ||
2460 | /* | |
2461 | * It's probably a login/logout/reconnect status. | |
2462 | */ | |
2463 | if ((scsi_id->login_orb_dma == scsi_id->status_block.ORB_offset_lo) || | |
2464 | (scsi_id->query_logins_orb_dma == scsi_id->status_block.ORB_offset_lo) || | |
2465 | (scsi_id->reconnect_orb_dma == scsi_id->status_block.ORB_offset_lo) || | |
2466 | (scsi_id->logout_orb_dma == scsi_id->status_block.ORB_offset_lo)) { | |
2467 | atomic_set(&scsi_id->sbp2_login_complete, 1); | |
2468 | } | |
2469 | } | |
2470 | ||
2471 | if (SCpnt) { | |
2472 | ||
2473 | /* Complete the SCSI command. */ | |
2474 | SBP2_DEBUG("Completing SCSI command"); | |
2475 | sbp2scsi_complete_command(scsi_id, scsi_status, SCpnt, | |
2476 | command->Current_done); | |
2477 | SBP2_ORB_DEBUG("command orb completed"); | |
2478 | } | |
2479 | ||
2480 | return(RCODE_COMPLETE); | |
2481 | } | |
2482 | ||
2483 | ||
2484 | /************************************** | |
2485 | * SCSI interface related section | |
2486 | **************************************/ | |
2487 | ||
2488 | /* | |
2489 | * This routine is the main request entry routine for doing I/O. It is | |
2490 | * called from the scsi stack directly. | |
2491 | */ | |
2492 | static int sbp2scsi_queuecommand(struct scsi_cmnd *SCpnt, | |
2493 | void (*done)(struct scsi_cmnd *)) | |
2494 | { | |
2495 | struct scsi_id_instance_data *scsi_id = | |
2496 | (struct scsi_id_instance_data *)SCpnt->device->host->hostdata[0]; | |
2497 | struct sbp2scsi_host_info *hi; | |
abd559b1 | 2498 | int result = DID_NO_CONNECT << 16; |
1da177e4 LT |
2499 | |
2500 | SBP2_DEBUG("sbp2scsi_queuecommand"); | |
2501 | ||
abd559b1 JM |
2502 | if (!sbp2util_node_is_available(scsi_id)) |
2503 | goto done; | |
1da177e4 LT |
2504 | |
2505 | hi = scsi_id->hi; | |
2506 | ||
2507 | if (!hi) { | |
2508 | SBP2_ERR("sbp2scsi_host_info is NULL - this is bad!"); | |
abd559b1 | 2509 | goto done; |
1da177e4 LT |
2510 | } |
2511 | ||
2512 | /* | |
2513 | * Until we handle multiple luns, just return selection time-out | |
2514 | * to any IO directed at non-zero LUNs | |
2515 | */ | |
abd559b1 JM |
2516 | if (SCpnt->device->lun) |
2517 | goto done; | |
1da177e4 LT |
2518 | |
2519 | /* | |
2520 | * Check for request sense command, and handle it here | |
2521 | * (autorequest sense) | |
2522 | */ | |
2523 | if (SCpnt->cmnd[0] == REQUEST_SENSE) { | |
2524 | SBP2_DEBUG("REQUEST_SENSE"); | |
2525 | memcpy(SCpnt->request_buffer, SCpnt->sense_buffer, SCpnt->request_bufflen); | |
2526 | memset(SCpnt->sense_buffer, 0, sizeof(SCpnt->sense_buffer)); | |
2527 | sbp2scsi_complete_command(scsi_id, SBP2_SCSI_STATUS_GOOD, SCpnt, done); | |
abd559b1 | 2528 | return 0; |
1da177e4 LT |
2529 | } |
2530 | ||
2531 | /* | |
2532 | * Check to see if we are in the middle of a bus reset. | |
2533 | */ | |
2534 | if (!hpsb_node_entry_valid(scsi_id->ne)) { | |
2535 | SBP2_ERR("Bus reset in progress - rejecting command"); | |
abd559b1 JM |
2536 | result = DID_BUS_BUSY << 16; |
2537 | goto done; | |
1da177e4 LT |
2538 | } |
2539 | ||
2540 | /* | |
2541 | * Try and send our SCSI command | |
2542 | */ | |
2543 | if (sbp2_send_command(scsi_id, SCpnt, done)) { | |
2544 | SBP2_ERR("Error sending SCSI command"); | |
2545 | sbp2scsi_complete_command(scsi_id, SBP2_SCSI_STATUS_SELECTION_TIMEOUT, | |
2546 | SCpnt, done); | |
2547 | } | |
abd559b1 | 2548 | return 0; |
1da177e4 | 2549 | |
abd559b1 JM |
2550 | done: |
2551 | SCpnt->result = result; | |
2552 | done(SCpnt); | |
2553 | return 0; | |
1da177e4 LT |
2554 | } |
2555 | ||
2556 | /* | |
2557 | * This function is called in order to complete all outstanding SBP-2 | |
2558 | * commands (in case of resets, etc.). | |
2559 | */ | |
2560 | static void sbp2scsi_complete_all_commands(struct scsi_id_instance_data *scsi_id, | |
2561 | u32 status) | |
2562 | { | |
2563 | struct sbp2scsi_host_info *hi = scsi_id->hi; | |
2564 | struct list_head *lh; | |
2565 | struct sbp2_command_info *command; | |
2566 | ||
2567 | SBP2_DEBUG("sbp2scsi_complete_all_commands"); | |
2568 | ||
2569 | while (!list_empty(&scsi_id->sbp2_command_orb_inuse)) { | |
2570 | SBP2_DEBUG("Found pending command to complete"); | |
2571 | lh = scsi_id->sbp2_command_orb_inuse.next; | |
2572 | command = list_entry(lh, struct sbp2_command_info, list); | |
2573 | pci_dma_sync_single_for_cpu(hi->host->pdev, command->command_orb_dma, | |
2574 | sizeof(struct sbp2_command_orb), | |
2575 | PCI_DMA_BIDIRECTIONAL); | |
2576 | pci_dma_sync_single_for_cpu(hi->host->pdev, command->sge_dma, | |
2577 | sizeof(command->scatter_gather_element), | |
2578 | PCI_DMA_BIDIRECTIONAL); | |
2579 | sbp2util_mark_command_completed(scsi_id, command); | |
2580 | if (command->Current_SCpnt) { | |
2581 | command->Current_SCpnt->result = status << 16; | |
2582 | command->Current_done(command->Current_SCpnt); | |
2583 | } | |
2584 | } | |
2585 | ||
2586 | return; | |
2587 | } | |
2588 | ||
2589 | /* | |
2590 | * This function is called in order to complete a regular SBP-2 command. | |
2591 | * | |
2592 | * This can be called in interrupt context. | |
2593 | */ | |
2594 | static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id, | |
2595 | u32 scsi_status, struct scsi_cmnd *SCpnt, | |
2596 | void (*done)(struct scsi_cmnd *)) | |
2597 | { | |
1da177e4 LT |
2598 | SBP2_DEBUG("sbp2scsi_complete_command"); |
2599 | ||
2600 | /* | |
2601 | * Sanity | |
2602 | */ | |
2603 | if (!SCpnt) { | |
2604 | SBP2_ERR("SCpnt is NULL"); | |
2605 | return; | |
2606 | } | |
2607 | ||
2608 | /* | |
2609 | * If a bus reset is in progress and there was an error, don't | |
2610 | * complete the command, just let it get retried at the end of the | |
2611 | * bus reset. | |
2612 | */ | |
2613 | if (!hpsb_node_entry_valid(scsi_id->ne) && (scsi_status != SBP2_SCSI_STATUS_GOOD)) { | |
2614 | SBP2_ERR("Bus reset in progress - retry command later"); | |
2615 | return; | |
2616 | } | |
2617 | ||
2618 | /* | |
2619 | * Switch on scsi status | |
2620 | */ | |
2621 | switch (scsi_status) { | |
2622 | case SBP2_SCSI_STATUS_GOOD: | |
2623 | SCpnt->result = DID_OK; | |
2624 | break; | |
2625 | ||
2626 | case SBP2_SCSI_STATUS_BUSY: | |
2627 | SBP2_ERR("SBP2_SCSI_STATUS_BUSY"); | |
2628 | SCpnt->result = DID_BUS_BUSY << 16; | |
2629 | break; | |
2630 | ||
2631 | case SBP2_SCSI_STATUS_CHECK_CONDITION: | |
2632 | SBP2_DEBUG("SBP2_SCSI_STATUS_CHECK_CONDITION"); | |
2633 | SCpnt->result = CHECK_CONDITION << 1; | |
2634 | ||
2635 | /* | |
2636 | * Debug stuff | |
2637 | */ | |
2638 | #if CONFIG_IEEE1394_SBP2_DEBUG >= 1 | |
2639 | scsi_print_command(SCpnt); | |
2640 | scsi_print_sense("bh", SCpnt); | |
2641 | #endif | |
2642 | ||
2643 | break; | |
2644 | ||
2645 | case SBP2_SCSI_STATUS_SELECTION_TIMEOUT: | |
2646 | SBP2_ERR("SBP2_SCSI_STATUS_SELECTION_TIMEOUT"); | |
2647 | SCpnt->result = DID_NO_CONNECT << 16; | |
2648 | scsi_print_command(SCpnt); | |
2649 | break; | |
2650 | ||
2651 | case SBP2_SCSI_STATUS_CONDITION_MET: | |
2652 | case SBP2_SCSI_STATUS_RESERVATION_CONFLICT: | |
2653 | case SBP2_SCSI_STATUS_COMMAND_TERMINATED: | |
2654 | SBP2_ERR("Bad SCSI status = %x", scsi_status); | |
2655 | SCpnt->result = DID_ERROR << 16; | |
2656 | scsi_print_command(SCpnt); | |
2657 | break; | |
2658 | ||
2659 | default: | |
2660 | SBP2_ERR("Unsupported SCSI status = %x", scsi_status); | |
2661 | SCpnt->result = DID_ERROR << 16; | |
2662 | } | |
2663 | ||
2664 | /* | |
2665 | * Take care of any sbp2 response data mucking here (RBC stuff, etc.) | |
2666 | */ | |
2667 | if (SCpnt->result == DID_OK) { | |
2668 | sbp2_check_sbp2_response(scsi_id, SCpnt); | |
2669 | } | |
2670 | ||
2671 | /* | |
2672 | * If a bus reset is in progress and there was an error, complete | |
2673 | * the command as busy so that it will get retried. | |
2674 | */ | |
2675 | if (!hpsb_node_entry_valid(scsi_id->ne) && (scsi_status != SBP2_SCSI_STATUS_GOOD)) { | |
2676 | SBP2_ERR("Completing command with busy (bus reset)"); | |
2677 | SCpnt->result = DID_BUS_BUSY << 16; | |
2678 | } | |
2679 | ||
2680 | /* | |
2681 | * If a unit attention occurs, return busy status so it gets | |
2682 | * retried... it could have happened because of a 1394 bus reset | |
2683 | * or hot-plug... | |
2684 | */ | |
2685 | #if 0 | |
2686 | if ((scsi_status == SBP2_SCSI_STATUS_CHECK_CONDITION) && | |
2687 | (SCpnt->sense_buffer[2] == UNIT_ATTENTION)) { | |
2688 | SBP2_DEBUG("UNIT ATTENTION - return busy"); | |
2689 | SCpnt->result = DID_BUS_BUSY << 16; | |
2690 | } | |
2691 | #endif | |
2692 | ||
2693 | /* | |
2694 | * Tell scsi stack that we're done with this command | |
2695 | */ | |
1da177e4 | 2696 | done (SCpnt); |
1da177e4 LT |
2697 | } |
2698 | ||
2699 | ||
abd559b1 | 2700 | static int sbp2scsi_slave_alloc(struct scsi_device *sdev) |
1da177e4 | 2701 | { |
abd559b1 JM |
2702 | ((struct scsi_id_instance_data *)sdev->host->hostdata[0])->sdev = sdev; |
2703 | return 0; | |
2704 | } | |
2705 | ||
1934b8b6 | 2706 | |
abd559b1 JM |
2707 | static int sbp2scsi_slave_configure(struct scsi_device *sdev) |
2708 | { | |
2709 | blk_queue_dma_alignment(sdev->request_queue, (512 - 1)); | |
1da177e4 LT |
2710 | return 0; |
2711 | } | |
2712 | ||
2713 | ||
abd559b1 JM |
2714 | static void sbp2scsi_slave_destroy(struct scsi_device *sdev) |
2715 | { | |
2716 | ((struct scsi_id_instance_data *)sdev->host->hostdata[0])->sdev = NULL; | |
2717 | return; | |
2718 | } | |
2719 | ||
2720 | ||
1da177e4 LT |
2721 | /* |
2722 | * Called by scsi stack when something has really gone wrong. Usually | |
2723 | * called when a command has timed-out for some reason. | |
2724 | */ | |
2725 | static int sbp2scsi_abort(struct scsi_cmnd *SCpnt) | |
2726 | { | |
2727 | struct scsi_id_instance_data *scsi_id = | |
2728 | (struct scsi_id_instance_data *)SCpnt->device->host->hostdata[0]; | |
2729 | struct sbp2scsi_host_info *hi = scsi_id->hi; | |
2730 | struct sbp2_command_info *command; | |
2731 | ||
2732 | SBP2_ERR("aborting sbp2 command"); | |
2733 | scsi_print_command(SCpnt); | |
2734 | ||
abd559b1 | 2735 | if (sbp2util_node_is_available(scsi_id)) { |
1da177e4 LT |
2736 | |
2737 | /* | |
2738 | * Right now, just return any matching command structures | |
2739 | * to the free pool. | |
2740 | */ | |
2741 | command = sbp2util_find_command_for_SCpnt(scsi_id, SCpnt); | |
2742 | if (command) { | |
2743 | SBP2_DEBUG("Found command to abort"); | |
2744 | pci_dma_sync_single_for_cpu(hi->host->pdev, | |
2745 | command->command_orb_dma, | |
2746 | sizeof(struct sbp2_command_orb), | |
2747 | PCI_DMA_BIDIRECTIONAL); | |
2748 | pci_dma_sync_single_for_cpu(hi->host->pdev, | |
2749 | command->sge_dma, | |
2750 | sizeof(command->scatter_gather_element), | |
2751 | PCI_DMA_BIDIRECTIONAL); | |
2752 | sbp2util_mark_command_completed(scsi_id, command); | |
2753 | if (command->Current_SCpnt) { | |
2754 | command->Current_SCpnt->result = DID_ABORT << 16; | |
2755 | command->Current_done(command->Current_SCpnt); | |
2756 | } | |
2757 | } | |
2758 | ||
2759 | /* | |
2760 | * Initiate a fetch agent reset. | |
2761 | */ | |
2762 | sbp2_agent_reset(scsi_id, 0); | |
2763 | sbp2scsi_complete_all_commands(scsi_id, DID_BUS_BUSY); | |
2764 | } | |
2765 | ||
2766 | return(SUCCESS); | |
2767 | } | |
2768 | ||
2769 | /* | |
2770 | * Called by scsi stack when something has really gone wrong. | |
2771 | */ | |
abd559b1 | 2772 | static int sbp2scsi_reset(struct scsi_cmnd *SCpnt) |
1da177e4 LT |
2773 | { |
2774 | struct scsi_id_instance_data *scsi_id = | |
2775 | (struct scsi_id_instance_data *)SCpnt->device->host->hostdata[0]; | |
abd559b1 | 2776 | unsigned long flags; |
1da177e4 LT |
2777 | |
2778 | SBP2_ERR("reset requested"); | |
2779 | ||
abd559b1 JM |
2780 | spin_lock_irqsave(SCpnt->device->host->host_lock, flags); |
2781 | ||
2782 | if (sbp2util_node_is_available(scsi_id)) { | |
1da177e4 LT |
2783 | SBP2_ERR("Generating sbp2 fetch agent reset"); |
2784 | sbp2_agent_reset(scsi_id, 0); | |
2785 | } | |
2786 | ||
94d0e7b8 JG |
2787 | spin_unlock_irqrestore(SCpnt->device->host->host_lock, flags); |
2788 | ||
abd559b1 | 2789 | return SUCCESS; |
94d0e7b8 JG |
2790 | } |
2791 | ||
1da177e4 LT |
2792 | static const char *sbp2scsi_info (struct Scsi_Host *host) |
2793 | { | |
2794 | return "SCSI emulation for IEEE-1394 SBP-2 Devices"; | |
2795 | } | |
2796 | ||
e404e274 | 2797 | static ssize_t sbp2_sysfs_ieee1394_id_show(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
2798 | { |
2799 | struct scsi_device *sdev; | |
2800 | struct scsi_id_instance_data *scsi_id; | |
2801 | int lun; | |
2802 | ||
2803 | if (!(sdev = to_scsi_device(dev))) | |
2804 | return 0; | |
2805 | ||
2806 | if (!(scsi_id = (struct scsi_id_instance_data *)sdev->host->hostdata[0])) | |
2807 | return 0; | |
2808 | ||
2809 | if (scsi_id->sbp2_device_type_and_lun == SBP2_DEVICE_TYPE_LUN_UNINITIALIZED) | |
2810 | lun = 0; | |
2811 | else | |
2812 | lun = ORB_SET_LUN(scsi_id->sbp2_device_type_and_lun); | |
2813 | ||
2814 | return sprintf(buf, "%016Lx:%d:%d\n", (unsigned long long)scsi_id->ne->guid, | |
2815 | scsi_id->ud->id, lun); | |
2816 | } | |
2817 | static DEVICE_ATTR(ieee1394_id, S_IRUGO, sbp2_sysfs_ieee1394_id_show, NULL); | |
2818 | ||
2819 | static struct device_attribute *sbp2_sysfs_sdev_attrs[] = { | |
2820 | &dev_attr_ieee1394_id, | |
2821 | NULL | |
2822 | }; | |
2823 | ||
2824 | MODULE_AUTHOR("Ben Collins <bcollins@debian.org>"); | |
2825 | MODULE_DESCRIPTION("IEEE-1394 SBP-2 protocol driver"); | |
2826 | MODULE_SUPPORTED_DEVICE(SBP2_DEVICE_NAME); | |
2827 | MODULE_LICENSE("GPL"); | |
2828 | ||
2829 | /* SCSI host template */ | |
2830 | static struct scsi_host_template scsi_driver_template = { | |
2831 | .module = THIS_MODULE, | |
2832 | .name = "SBP-2 IEEE-1394", | |
2833 | .proc_name = SBP2_DEVICE_NAME, | |
2834 | .info = sbp2scsi_info, | |
2835 | .queuecommand = sbp2scsi_queuecommand, | |
2836 | .eh_abort_handler = sbp2scsi_abort, | |
2837 | .eh_device_reset_handler = sbp2scsi_reset, | |
2838 | .eh_bus_reset_handler = sbp2scsi_reset, | |
2839 | .eh_host_reset_handler = sbp2scsi_reset, | |
abd559b1 | 2840 | .slave_alloc = sbp2scsi_slave_alloc, |
1da177e4 | 2841 | .slave_configure = sbp2scsi_slave_configure, |
abd559b1 | 2842 | .slave_destroy = sbp2scsi_slave_destroy, |
1da177e4 LT |
2843 | .this_id = -1, |
2844 | .sg_tablesize = SG_ALL, | |
2845 | .use_clustering = ENABLE_CLUSTERING, | |
2846 | .cmd_per_lun = SBP2_MAX_CMDS, | |
2847 | .can_queue = SBP2_MAX_CMDS, | |
2848 | .emulated = 1, | |
2849 | .sdev_attrs = sbp2_sysfs_sdev_attrs, | |
2850 | }; | |
2851 | ||
2852 | static int sbp2_module_init(void) | |
2853 | { | |
2854 | int ret; | |
2855 | ||
2856 | SBP2_DEBUG("sbp2_module_init"); | |
2857 | ||
2858 | printk(KERN_INFO "sbp2: %s\n", version); | |
2859 | ||
2860 | /* Module load debug option to force one command at a time (serializing I/O) */ | |
2861 | if (serialize_io) { | |
2bab359a JM |
2862 | SBP2_INFO("Driver forced to serialize I/O (serialize_io=1)"); |
2863 | SBP2_INFO("Try serialize_io=0 for better performance"); | |
1da177e4 LT |
2864 | scsi_driver_template.can_queue = 1; |
2865 | scsi_driver_template.cmd_per_lun = 1; | |
2866 | } | |
2867 | ||
2868 | /* Set max sectors (module load option). Default is 255 sectors. */ | |
2869 | scsi_driver_template.max_sectors = max_sectors; | |
2870 | ||
2871 | ||
2872 | /* Register our high level driver with 1394 stack */ | |
2873 | hpsb_register_highlevel(&sbp2_highlevel); | |
2874 | ||
2875 | ret = hpsb_register_protocol(&sbp2_driver); | |
2876 | if (ret) { | |
2877 | SBP2_ERR("Failed to register protocol"); | |
2878 | hpsb_unregister_highlevel(&sbp2_highlevel); | |
2879 | return ret; | |
2880 | } | |
2881 | ||
2882 | return 0; | |
2883 | } | |
2884 | ||
2885 | static void __exit sbp2_module_exit(void) | |
2886 | { | |
2887 | SBP2_DEBUG("sbp2_module_exit"); | |
2888 | ||
2889 | hpsb_unregister_protocol(&sbp2_driver); | |
2890 | ||
2891 | hpsb_unregister_highlevel(&sbp2_highlevel); | |
2892 | } | |
2893 | ||
2894 | module_init(sbp2_module_init); | |
2895 | module_exit(sbp2_module_exit); |