[mirror_ubuntu-bionic-kernel.git] / drivers / input / keyboard / Kconfig

#
# Input core configuration
#
menuconfig INPUT_KEYBOARD
	bool "Keyboards" if EMBEDDED || !X86
	default y
	help
	  Say Y here, and a list of supported keyboards will be displayed.
	  This option doesn't affect the kernel.

	  If unsure, say Y.

if INPUT_KEYBOARD

config KEYBOARD_ATKBD
	tristate "AT keyboard" if EMBEDDED || !X86_PC
	default y
	select SERIO
	select SERIO_LIBPS2
	select SERIO_I8042 if X86_PC
	select SERIO_GSCPS2 if GSC
	help
	  Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
	  you'll need this, unless you have a different type keyboard (USB, ADB
	  or other). This also works for AT and PS/2 keyboards connected over a
	  PS/2 to serial converter.

	  If unsure, say Y.

	  To compile this driver as a module, choose M here: the
	  module will be called atkbd.

config KEYBOARD_ATKBD_HP_KEYCODES
	bool "Use HP keyboard scancodes"
	depends on PARISC && KEYBOARD_ATKBD
	default y
	help
	  Say Y here if you have a PA-RISC machine and want to use an AT or
	  PS/2 keyboard, and your keyboard uses keycodes that are specific to
	  PA-RISC keyboards.

	  Say N if you use a standard keyboard.

config KEYBOARD_ATKBD_RDI_KEYCODES
	bool "Use PrecisionBook keyboard scancodes"
	depends on KEYBOARD_ATKBD_HP_KEYCODES
	default n
	help
	  If you have an RDI PrecisionBook, say Y here if you want to use its
	  built-in keyboard (as opposed to an external keyboard).

	  The PrecisionBook has five keys that conflict with those used by most
	  AT and PS/2 keyboards. These are as follows:

	    PrecisionBook    Standard AT or PS/2

	    F1               F12
	    Left Ctrl        Left Alt
	    Caps Lock        Left Ctrl
	    Right Ctrl       Caps Lock
	    Left             102nd key (the key to the right of Left Shift)

	  If you say N here, and use the PrecisionBook keyboard, then each key
	  in the left-hand column will be interpreted as the corresponding key
	  in the right-hand column.

	  If you say Y here, and use an external keyboard, then each key in the
	  right-hand column will be interpreted as the key shown in the
	  left-hand column.

config KEYBOARD_SUNKBD
	tristate "Sun Type 4 and Type 5 keyboard"
	select SERIO
	help
	  Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
	  connected either to the Sun keyboard connector or to an serial
	  (RS-232) port via a simple adapter.

	  To compile this driver as a module, choose M here: the
	  module will be called sunkbd.

config KEYBOARD_LKKBD
	tristate "DECstation/VAXstation LK201/LK401 keyboard"
	select SERIO
	help
	  Say Y here if you want to use a LK201 or LK401 style serial
	  keyboard. This keyboard is also useable on PCs if you attach
	  it with the inputattach program. The connector pinout is
	  described within lkkbd.c.

	  To compile this driver as a module, choose M here: the
	  module will be called lkkbd.

config KEYBOARD_LOCOMO
	tristate "LoCoMo Keyboard Support"
	depends on SHARP_LOCOMO && INPUT_KEYBOARD
	help
	  Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA

	  To compile this driver as a module, choose M here: the
	  module will be called locomokbd.

config KEYBOARD_XTKBD
	tristate "XT keyboard"
	select SERIO
	help
	  Say Y here if you want to use the old IBM PC/XT keyboard (or
	  compatible) on your system. This is only possible with a
	  parallel port keyboard adapter, you cannot connect it to the
	  keyboard port on a PC that runs Linux.

	  To compile this driver as a module, choose M here: the
	  module will be called xtkbd.

config KEYBOARD_NEWTON
	tristate "Newton keyboard"
	select SERIO
	help
	  Say Y here if you have a Newton keyboard on a serial port.

	  To compile this driver as a module, choose M here: the
	  module will be called newtonkbd.

config KEYBOARD_STOWAWAY
	tristate "Stowaway keyboard"
	select SERIO
	help
	  Say Y here if you have a Stowaway keyboard on a serial port.
	  Stowaway compatible keyboards like Dicota Input-PDA keyboard
	  are also supported by this driver.

	  To compile this driver as a module, choose M here: the
	  module will be called stowaway.

config KEYBOARD_CORGI
	tristate "Corgi keyboard"
	depends on PXA_SHARPSL
	default y
	help
	  Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx
	  series of PDAs.

	  To compile this driver as a module, choose M here: the
	  module will be called corgikbd.

config KEYBOARD_SPITZ
	tristate "Spitz keyboard"
	depends on PXA_SHARPSL
	default y
	help
	  Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,
	  SL-C3000 and Sl-C3100 series of PDAs.

	  To compile this driver as a module, choose M here: the
	  module will be called spitzkbd.

config KEYBOARD_AMIGA
	tristate "Amiga keyboard"
	depends on AMIGA
	help
	  Say Y here if you are running Linux on any AMIGA and have a keyboard
	  attached.

	  To compile this driver as a module, choose M here: the
	  module will be called amikbd.

config ATARI_KBD_CORE
	bool

config KEYBOARD_ATARI
	tristate "Atari keyboard"
	depends on ATARI
	select ATARI_KBD_CORE
	help
	  Say Y here if you are running Linux on any Atari and have a keyboard
	  attached.

	  To compile this driver as a module, choose M here: the
	  module will be called atakbd.

config KEYBOARD_HIL_OLD
	tristate "HP HIL keyboard support (simple driver)"
	depends on GSC || HP300
	default y
	help
	  The "Human Interface Loop" is a older, 8-channel USB-like
	  controller used in several Hewlett Packard models. This driver
	  was adapted from the one written for m68k/hp300, and implements
	  support for a keyboard attached to the HIL port, but not for
	  any other types of HIL input devices like mice or tablets.
	  However, it has been thoroughly tested and is stable.

	  If you want full HIL support including support for multiple
	  keyboards, mice, and tablets, you have to enable the
	  "HP System Device Controller i8042 Support" in the input/serio
	  submenu.

config KEYBOARD_HIL
	tristate "HP HIL keyboard support"
	depends on GSC || HP300
	default y
	select HP_SDC
	select HIL_MLC
	select SERIO
	help
	  The "Human Interface Loop" is a older, 8-channel USB-like
	  controller used in several Hewlett Packard models.
	  This driver implements support for HIL-keyboards attached
	  to your machine, so normally you should say Y here.

config KEYBOARD_HP6XX
	tristate "HP Jornada 6XX Keyboard support"
	depends on SH_HP6XX
	select INPUT_POLLDEV
	help
	  This adds support for the onboard keyboard found on
	  HP Jornada 620/660/680/690.

	  To compile this driver as a module, choose M here: the
	  module will be called jornada680_kbd.

config KEYBOARD_HP7XX
	tristate "HP Jornada 7XX Keyboard Driver"
	depends on SA1100_JORNADA720_SSP && SA1100_SSP
	help
	  Say Y here to add support for the HP Jornada 7xx (710/720/728)
	  onboard keyboard.

	  To compile this driver as a module, choose M here: the
	  module will be called jornada720_kbd.

config KEYBOARD_OMAP
	tristate "TI OMAP keypad support"
	depends on (ARCH_OMAP1 || ARCH_OMAP2)
	help
	  Say Y here if you want to use the OMAP keypad.

	  To compile this driver as a module, choose M here: the
	  module will be called omap-keypad.

config KEYBOARD_PXA27x
	tristate "PXA27x keyboard support"
	depends on PXA27x
	help
	  Enable support for PXA27x matrix keyboard controller

	  To compile this driver as a module, choose M here: the
	  module will be called pxa27x_keyboard.

config KEYBOARD_AAED2000
	tristate "AAED-2000 keyboard"
	depends on MACH_AAED2000
	select INPUT_POLLDEV
	default y
	help
	  Say Y here to enable the keyboard on the Agilent AAED-2000
	  development board.

	  To compile this driver as a module, choose M here: the
	  module will be called aaed2000_kbd.

config KEYBOARD_GPIO
	tristate "GPIO Buttons"
	depends on GENERIC_GPIO
	help
	  This driver implements support for buttons connected
	  to GPIO pins of various CPUs (and some other chips).

	  Say Y here if your device has buttons connected
	  directly to such GPIO pins.  Your board-specific
	  setup logic must also provide a platform device,
	  with configuration data saying which GPIOs are used.

	  To compile this driver as a module, choose M here: the
	  module will be called gpio-keys.

config KEYBOARD_MAPLE
	tristate "Maple bus keyboard"
	depends on SH_DREAMCAST && MAPLE
	help
	  Say Y here if you have a Dreamcast console running Linux and have
	  a keyboard attached to its Maple bus.

	  To compile this driver as a module, choose M here: the
	  module will be called maple_keyb.

config KEYBOARD_BFIN
	tristate "Blackfin BF54x keypad support"
	depends on (BF54x && !BF544)
	help
	  Say Y here if you want to use the BF54x keypad.

	  To compile this driver as a module, choose M here: the
	  module will be called bf54x-keys.

endif
Commit	Line	Data
1da177e4 LT	1	#
	2	# Input core configuration
	3	#
	4	menuconfig INPUT_KEYBOARD
	5	bool "Keyboards" if EMBEDDED \|\| !X86
	6	default y
	7	help
	8	Say Y here, and a list of supported keyboards will be displayed.
	9	This option doesn't affect the kernel.
	10
	11	If unsure, say Y.
	12
	13	if INPUT_KEYBOARD
	14
	15	config KEYBOARD_ATKBD
aaef685d	16	tristate "AT keyboard" if EMBEDDED \|\| !X86_PC
1da177e4 LT	17	default y
	18	select SERIO
	19	select SERIO_LIBPS2
f2c84c0e	20	select SERIO_I8042 if X86_PC
1da177e4 LT	21	select SERIO_GSCPS2 if GSC
	22	help
	23	Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
	24	you'll need this, unless you have a different type keyboard (USB, ADB
	25	or other). This also works for AT and PS/2 keyboards connected over a
	26	PS/2 to serial converter.
	27
	28	If unsure, say Y.
	29
	30	To compile this driver as a module, choose M here: the
	31	module will be called atkbd.
	32
	33	config KEYBOARD_ATKBD_HP_KEYCODES
	34	bool "Use HP keyboard scancodes"
	35	depends on PARISC && KEYBOARD_ATKBD
	36	default y
	37	help
	38	Say Y here if you have a PA-RISC machine and want to use an AT or
	39	PS/2 keyboard, and your keyboard uses keycodes that are specific to
	40	PA-RISC keyboards.
	41
	42	Say N if you use a standard keyboard.
	43
	44	config KEYBOARD_ATKBD_RDI_KEYCODES
	45	bool "Use PrecisionBook keyboard scancodes"
	46	depends on KEYBOARD_ATKBD_HP_KEYCODES
	47	default n
	48	help
	49	If you have an RDI PrecisionBook, say Y here if you want to use its
	50	built-in keyboard (as opposed to an external keyboard).
	51
	52	The PrecisionBook has five keys that conflict with those used by most
	53	AT and PS/2 keyboards. These are as follows:
	54
	55	PrecisionBook Standard AT or PS/2
	56
	57	F1 F12
	58	Left Ctrl Left Alt
	59	Caps Lock Left Ctrl
	60	Right Ctrl Caps Lock
	61	Left 102nd key (the key to the right of Left Shift)
	62
	63	If you say N here, and use the PrecisionBook keyboard, then each key
	64	in the left-hand column will be interpreted as the corresponding key
	65	in the right-hand column.
	66
	67	If you say Y here, and use an external keyboard, then each key in the
	68	right-hand column will be interpreted as the key shown in the
	69	left-hand column.
	70
	71	config KEYBOARD_SUNKBD
	72	tristate "Sun Type 4 and Type 5 keyboard"
	73	select SERIO
	74	help
	75	Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
	76	connected either to the Sun keyboard connector or to an serial
	77	(RS-232) port via a simple adapter.
	78
	79	To compile this driver as a module, choose M here: the
	80	module will be called sunkbd.
	81
	82	config KEYBOARD_LKKBD
	83	tristate "DECstation/VAXstation LK201/LK401 keyboard"
	84	select SERIO
85	help
86	Say Y here if you want to use a LK201 or LK401 style serial
87	keyboard. This keyboard is also useable on PCs if you attach
88	it with the inputattach program. The connector pinout is
89	described within lkkbd.c.
90
91	To compile this driver as a module, choose M here: the
92	module will be called lkkbd.
93
94	config KEYBOARD_LOCOMO
95	tristate "LoCoMo Keyboard Support"
65d406ac	96	depends on SHARP_LOCOMO && INPUT_KEYBOARD
1da177e4 LT	97	help
	98	Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
	99
	100	To compile this driver as a module, choose M here: the
	101	module will be called locomokbd.
	102
	103	config KEYBOARD_XTKBD
	104	tristate "XT keyboard"
	105	select SERIO
	106	help
	107	Say Y here if you want to use the old IBM PC/XT keyboard (or
	108	compatible) on your system. This is only possible with a
	109	parallel port keyboard adapter, you cannot connect it to the
	110	keyboard port on a PC that runs Linux.
	111
	112	To compile this driver as a module, choose M here: the
	113	module will be called xtkbd.
	114
	115	config KEYBOARD_NEWTON
	116	tristate "Newton keyboard"
	117	select SERIO
	118	help
	119	Say Y here if you have a Newton keyboard on a serial port.
	120
	121	To compile this driver as a module, choose M here: the
	122	module will be called newtonkbd.
	123
f35d0616 MV	124	config KEYBOARD_STOWAWAY
	125	tristate "Stowaway keyboard"
	126	select SERIO
	127	help
	128	Say Y here if you have a Stowaway keyboard on a serial port.
	129	Stowaway compatible keyboards like Dicota Input-PDA keyboard
	130	are also supported by this driver.
	131
	132	To compile this driver as a module, choose M here: the
	133	module will be called stowaway.
	134
1da177e4 LT	135	config KEYBOARD_CORGI
	136	tristate "Corgi keyboard"
	137	depends on PXA_SHARPSL
78a56aab	138	default y
1da177e4	139	help
78a56aab	140	Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx
1da177e4 LT	141	series of PDAs.
1da177e4 LT	142
78a56aab	143	To compile this driver as a module, choose M here: the
1da177e4 LT	144	module will be called corgikbd.
1da177e4 LT	145
fff71312 RP	146	config KEYBOARD_SPITZ
	147	tristate "Spitz keyboard"
	148	depends on PXA_SHARPSL
	149	default y
	150	help
	151	Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,
	152	SL-C3000 and Sl-C3100 series of PDAs.
	153
	154	To compile this driver as a module, choose M here: the
	155	module will be called spitzkbd.
	156
1da177e4 LT	157	config KEYBOARD_AMIGA
	158	tristate "Amiga keyboard"
	159	depends on AMIGA
	160	help
	161	Say Y here if you are running Linux on any AMIGA and have a keyboard
	162	attached.
	163
	164	To compile this driver as a module, choose M here: the
	165	module will be called amikbd.
	166
0e52d328 AK	167	config ATARI_KBD_CORE
	168	bool
	169
c04cb856 MS	170	config KEYBOARD_ATARI
	171	tristate "Atari keyboard"
	172	depends on ATARI
	173	select ATARI_KBD_CORE
	174	help
	175	Say Y here if you are running Linux on any Atari and have a keyboard
	176	attached.
	177
	178	To compile this driver as a module, choose M here: the
	179	module will be called atakbd.
	180
1da177e4 LT	181	config KEYBOARD_HIL_OLD
1da177e4 LT	182	tristate "HP HIL keyboard support (simple driver)"
da96d0b5	183	depends on GSC \|\| HP300
1da177e4 LT	184	default y
	185	help
	186	The "Human Interface Loop" is a older, 8-channel USB-like
	187	controller used in several Hewlett Packard models. This driver
	188	was adapted from the one written for m68k/hp300, and implements
	189	support for a keyboard attached to the HIL port, but not for
	190	any other types of HIL input devices like mice or tablets.
	191	However, it has been thoroughly tested and is stable.
	192
	193	If you want full HIL support including support for multiple
09509603	194	keyboards, mice, and tablets, you have to enable the
1da177e4 LT	195	"HP System Device Controller i8042 Support" in the input/serio
	196	submenu.
	197
	198	config KEYBOARD_HIL
	199	tristate "HP HIL keyboard support"
da96d0b5	200	depends on GSC \|\| HP300
1da177e4 LT	201	default y
	202	select HP_SDC
	203	select HIL_MLC
	204	select SERIO
	205	help
	206	The "Human Interface Loop" is a older, 8-channel USB-like
	207	controller used in several Hewlett Packard models.
	208	This driver implements support for HIL-keyboards attached
	209	to your machine, so normally you should say Y here.
	210
2aa2cb9e KE	211	config KEYBOARD_HP6XX
	212	tristate "HP Jornada 6XX Keyboard support"
	213	depends on SH_HP6XX
	214	select INPUT_POLLDEV
	215	help
	216	This adds support for the onboard keyboard found on
	217	HP Jornada 620/660/680/690.
	218
	219	To compile this driver as a module, choose M here: the
	220	module will be called jornada680_kbd.
	221
b0a4e1aa KE	222	config KEYBOARD_HP7XX
	223	tristate "HP Jornada 7XX Keyboard Driver"
	224	depends on SA1100_JORNADA720_SSP && SA1100_SSP
	225	help
	226	Say Y here to add support for the HP Jornada 7xx (710/720/728)
	227	onboard keyboard.
	228
	229	To compile this driver as a module, choose M here: the
	230	module will be called jornada720_kbd.
	231
ad4e09b1 KS	232	config KEYBOARD_OMAP
	233	tristate "TI OMAP keypad support"
	234	depends on (ARCH_OMAP1 \|\| ARCH_OMAP2)
	235	help
	236	Say Y here if you want to use the OMAP keypad.
	237
	238	To compile this driver as a module, choose M here: the
	239	module will be called omap-keypad.
	240
5a90e5bc RG	241	config KEYBOARD_PXA27x
	242	tristate "PXA27x keyboard support"
	243	depends on PXA27x
	244	help
	245	Enable support for PXA27x matrix keyboard controller
	246
	247	To compile this driver as a module, choose M here: the
	248	module will be called pxa27x_keyboard.
	249
f9705fcb NB	250	config KEYBOARD_AAED2000
	251	tristate "AAED-2000 keyboard"
	252	depends on MACH_AAED2000
3f07d879	253	select INPUT_POLLDEV
f9705fcb NB	254	default y
	255	help
	256	Say Y here to enable the keyboard on the Agilent AAED-2000
	257	development board.
	258
	259	To compile this driver as a module, choose M here: the
	260	module will be called aaed2000_kbd.
	261
78a56aab	262	config KEYBOARD_GPIO
0a938b97 DB	263	tristate "GPIO Buttons"
0a938b97 DB	264	depends on GENERIC_GPIO
78a56aab PB	265	help
78a56aab PB	266	This driver implements support for buttons connected
0a938b97	267	to GPIO pins of various CPUs (and some other chips).
78a56aab PB	268
78a56aab PB	269	Say Y here if your device has buttons connected
0a938b97 DB	270	directly to such GPIO pins. Your board-specific
	271	setup logic must also provide a platform device,
	272	with configuration data saying which GPIOs are used.
78a56aab PB	273
	274	To compile this driver as a module, choose M here: the
	275	module will be called gpio-keys.
	276
b11d2127 AM	277	config KEYBOARD_MAPLE
	278	tristate "Maple bus keyboard"
	279	depends on SH_DREAMCAST && MAPLE
	280	help
	281	Say Y here if you have a Dreamcast console running Linux and have
	282	a keyboard attached to its Maple bus.
	283
	284	To compile this driver as a module, choose M here: the
	285	module will be called maple_keyb.
	286
8f740ef3 MH	287	config KEYBOARD_BFIN
8f740ef3 MH	288	tristate "Blackfin BF54x keypad support"
6957c828	289	depends on (BF54x && !BF544)
8f740ef3 MH	290	help
	291	Say Y here if you want to use the BF54x keypad.
	292
	293	To compile this driver as a module, choose M here: the
	294	module will be called bf54x-keys.
	295
1da177e4	296	endif