]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # Input core configuration | |
3 | # | |
4 | menuconfig INPUT_KEYBOARD | |
bcd26230 | 5 | bool "Keyboards" |
1da177e4 LT |
6 | default y |
7 | help | |
8 | Say Y here, and a list of supported keyboards will be displayed. | |
9 | This option doesn't affect the kernel. | |
10 | ||
11 | If unsure, say Y. | |
12 | ||
13 | if INPUT_KEYBOARD | |
14 | ||
68077264 AB |
15 | config KEYBOARD_ADC |
16 | tristate "ADC Ladder Buttons" | |
17 | depends on IIO | |
18 | select INPUT_POLLDEV | |
19 | help | |
20 | This driver implements support for buttons connected | |
21 | to an ADC using a resistor ladder. | |
22 | ||
23 | Say Y here if your device has such buttons connected to an ADC. Your | |
24 | board-specific setup logic must also provide a configuration data | |
25 | for mapping voltages to buttons. | |
26 | ||
27 | To compile this driver as a module, choose M here: the | |
28 | module will be called adc_keys. | |
29 | ||
fba65fe0 MH |
30 | config KEYBOARD_ADP5520 |
31 | tristate "Keypad Support for ADP5520 PMIC" | |
32 | depends on PMIC_ADP5520 | |
33 | help | |
34 | This option enables support for the keypad scan matrix | |
35 | on Analog Devices ADP5520 PMICs. | |
36 | ||
37 | To compile this driver as a module, choose M here: the module will | |
38 | be called adp5520-keys. | |
39 | ||
88751dd6 | 40 | config KEYBOARD_ADP5588 |
5a9003db | 41 | tristate "ADP5588/87 I2C QWERTY Keypad and IO Expander" |
88751dd6 MH |
42 | depends on I2C |
43 | help | |
5a9003db | 44 | Say Y here if you want to use a ADP5588/87 attached to your |
88751dd6 MH |
45 | system I2C bus. |
46 | ||
47 | To compile this driver as a module, choose M here: the | |
48 | module will be called adp5588-keys. | |
49 | ||
9d2e1736 | 50 | config KEYBOARD_ADP5589 |
3f48e735 | 51 | tristate "ADP5585/ADP5589 I2C QWERTY Keypad and IO Expander" |
9d2e1736 MH |
52 | depends on I2C |
53 | help | |
3f48e735 | 54 | Say Y here if you want to use a ADP5585/ADP5589 attached to your |
9d2e1736 MH |
55 | system I2C bus. |
56 | ||
57 | To compile this driver as a module, choose M here: the | |
58 | module will be called adp5589-keys. | |
59 | ||
cb589529 DT |
60 | config KEYBOARD_AMIGA |
61 | tristate "Amiga keyboard" | |
62 | depends on AMIGA | |
63 | help | |
64 | Say Y here if you are running Linux on any AMIGA and have a keyboard | |
65 | attached. | |
66 | ||
67 | To compile this driver as a module, choose M here: the | |
68 | module will be called amikbd. | |
69 | ||
70 | config ATARI_KBD_CORE | |
71 | bool | |
72 | ||
73 | config KEYBOARD_ATARI | |
74 | tristate "Atari keyboard" | |
75 | depends on ATARI | |
76 | select ATARI_KBD_CORE | |
77 | help | |
78 | Say Y here if you are running Linux on any Atari and have a keyboard | |
79 | attached. | |
80 | ||
81 | To compile this driver as a module, choose M here: the | |
82 | module will be called atakbd. | |
83 | ||
1da177e4 | 84 | config KEYBOARD_ATKBD |
bcd26230 | 85 | tristate "AT keyboard" |
1da177e4 LT |
86 | default y |
87 | select SERIO | |
88 | select SERIO_LIBPS2 | |
0a4ac2ea | 89 | select SERIO_I8042 if ARCH_MIGHT_HAVE_PC_SERIO |
1da177e4 LT |
90 | select SERIO_GSCPS2 if GSC |
91 | help | |
92 | Say Y here if you want to use a standard AT or PS/2 keyboard. Usually | |
93 | you'll need this, unless you have a different type keyboard (USB, ADB | |
94 | or other). This also works for AT and PS/2 keyboards connected over a | |
95 | PS/2 to serial converter. | |
96 | ||
97 | If unsure, say Y. | |
98 | ||
99 | To compile this driver as a module, choose M here: the | |
100 | module will be called atkbd. | |
101 | ||
102 | config KEYBOARD_ATKBD_HP_KEYCODES | |
103 | bool "Use HP keyboard scancodes" | |
104 | depends on PARISC && KEYBOARD_ATKBD | |
105 | default y | |
106 | help | |
107 | Say Y here if you have a PA-RISC machine and want to use an AT or | |
108 | PS/2 keyboard, and your keyboard uses keycodes that are specific to | |
109 | PA-RISC keyboards. | |
110 | ||
111 | Say N if you use a standard keyboard. | |
112 | ||
113 | config KEYBOARD_ATKBD_RDI_KEYCODES | |
114 | bool "Use PrecisionBook keyboard scancodes" | |
115 | depends on KEYBOARD_ATKBD_HP_KEYCODES | |
116 | default n | |
117 | help | |
118 | If you have an RDI PrecisionBook, say Y here if you want to use its | |
119 | built-in keyboard (as opposed to an external keyboard). | |
120 | ||
121 | The PrecisionBook has five keys that conflict with those used by most | |
122 | AT and PS/2 keyboards. These are as follows: | |
123 | ||
124 | PrecisionBook Standard AT or PS/2 | |
125 | ||
126 | F1 F12 | |
127 | Left Ctrl Left Alt | |
128 | Caps Lock Left Ctrl | |
129 | Right Ctrl Caps Lock | |
130 | Left 102nd key (the key to the right of Left Shift) | |
131 | ||
132 | If you say N here, and use the PrecisionBook keyboard, then each key | |
133 | in the left-hand column will be interpreted as the corresponding key | |
134 | in the right-hand column. | |
135 | ||
136 | If you say Y here, and use an external keyboard, then each key in the | |
137 | right-hand column will be interpreted as the key shown in the | |
138 | left-hand column. | |
139 | ||
bd7e4e85 BS |
140 | config KEYBOARD_QT1070 |
141 | tristate "Atmel AT42QT1070 Touch Sensor Chip" | |
142 | depends on I2C | |
143 | help | |
144 | Say Y here if you want to use Atmel AT42QT1070 QTouch | |
145 | Sensor chip as input device. | |
146 | ||
147 | To compile this driver as a module, choose M here: | |
148 | the module will be called qt1070 | |
149 | ||
d90d8d5e | 150 | config KEYBOARD_QT2160 |
fde11323 | 151 | tristate "Atmel AT42QT2160 Touch Sensor Chip" |
6828b4bb | 152 | depends on I2C |
fde11323 RDP |
153 | help |
154 | If you say yes here you get support for Atmel AT42QT2160 Touch | |
155 | Sensor chip as a keyboard input. | |
156 | ||
157 | This driver can also be built as a module. If so, the module | |
158 | will be called qt2160. | |
159 | ||
cb589529 DT |
160 | config KEYBOARD_BFIN |
161 | tristate "Blackfin BF54x keypad support" | |
162 | depends on (BF54x && !BF544) | |
f35d0616 | 163 | help |
cb589529 | 164 | Say Y here if you want to use the BF54x keypad. |
f35d0616 MV |
165 | |
166 | To compile this driver as a module, choose M here: the | |
cb589529 | 167 | module will be called bf54x-keys. |
f35d0616 | 168 | |
e70f18e1 AS |
169 | config KEYBOARD_CLPS711X |
170 | tristate "CLPS711X Keypad support" | |
171 | depends on OF_GPIO && (ARCH_CLPS711X || COMPILE_TEST) | |
172 | select INPUT_MATRIXKMAP | |
173 | select INPUT_POLLDEV | |
174 | help | |
175 | Say Y here to enable the matrix keypad on the Cirrus Logic | |
176 | CLPS711X CPUs. | |
177 | ||
178 | To compile this driver as a module, choose M here: the | |
179 | module will be called clps711x-keypad. | |
180 | ||
131b3de7 LW |
181 | config KEYBOARD_DLINK_DIR685 |
182 | tristate "D-Link DIR-685 touchkeys support" | |
183 | depends on I2C | |
184 | default ARCH_GEMINI | |
185 | help | |
186 | If you say yes here you get support for the D-Link DIR-685 | |
187 | touchkeys. | |
188 | ||
189 | To compile this driver as a module, choose M here: the | |
190 | module will be called dlink-dir685-touchkeys. | |
191 | ||
cb589529 DT |
192 | config KEYBOARD_LKKBD |
193 | tristate "DECstation/VAXstation LK201/LK401 keyboard" | |
194 | select SERIO | |
fff71312 | 195 | help |
cb589529 DT |
196 | Say Y here if you want to use a LK201 or LK401 style serial |
197 | keyboard. This keyboard is also useable on PCs if you attach | |
198 | it with the inputattach program. The connector pinout is | |
199 | described within lkkbd.c. | |
fff71312 RP |
200 | |
201 | To compile this driver as a module, choose M here: the | |
cb589529 | 202 | module will be called lkkbd. |
fff71312 | 203 | |
cb589529 DT |
204 | config KEYBOARD_EP93XX |
205 | tristate "EP93xx Matrix Keypad support" | |
206 | depends on ARCH_EP93XX | |
1932811f | 207 | select INPUT_MATRIXKMAP |
93e9012f | 208 | help |
cb589529 | 209 | Say Y here to enable the matrix keypad on the Cirrus EP93XX. |
93e9012f DES |
210 | |
211 | To compile this driver as a module, choose M here: the | |
cb589529 | 212 | module will be called ep93xx_keypad. |
93e9012f | 213 | |
cb589529 DT |
214 | config KEYBOARD_GPIO |
215 | tristate "GPIO Buttons" | |
7d6548ab | 216 | depends on GPIOLIB || COMPILE_TEST |
1da177e4 | 217 | help |
cb589529 DT |
218 | This driver implements support for buttons connected |
219 | to GPIO pins of various CPUs (and some other chips). | |
0e52d328 | 220 | |
cb589529 DT |
221 | Say Y here if your device has buttons connected |
222 | directly to such GPIO pins. Your board-specific | |
223 | setup logic must also provide a platform device, | |
224 | with configuration data saying which GPIOs are used. | |
c04cb856 MS |
225 | |
226 | To compile this driver as a module, choose M here: the | |
bab7614d EM |
227 | module will be called gpio_keys. |
228 | ||
0e7d0c86 GJ |
229 | config KEYBOARD_GPIO_POLLED |
230 | tristate "Polled GPIO buttons" | |
76ec9d18 | 231 | depends on GPIOLIB |
0e7d0c86 GJ |
232 | select INPUT_POLLDEV |
233 | help | |
234 | This driver implements support for buttons connected | |
235 | to GPIO pins that are not capable of generating interrupts. | |
236 | ||
237 | Say Y here if your device has buttons connected | |
238 | directly to such GPIO pins. Your board-specific | |
239 | setup logic must also provide a platform device, | |
240 | with configuration data saying which GPIOs are used. | |
241 | ||
242 | To compile this driver as a module, choose M here: the | |
243 | module will be called gpio_keys_polled. | |
244 | ||
30ba3ead | 245 | config KEYBOARD_TCA6416 |
b8a3d6bc | 246 | tristate "TCA6416/TCA6408A Keypad Support" |
30ba3ead SG |
247 | depends on I2C |
248 | help | |
249 | This driver implements basic keypad functionality | |
b8a3d6bc | 250 | for keys connected through TCA6416/TCA6408A IO expanders. |
30ba3ead SG |
251 | |
252 | Say Y here if your device has keys connected to | |
b8a3d6bc | 253 | TCA6416/TCA6408A IO expander. Your board-specific setup logic |
30ba3ead SG |
254 | must also provide pin-mask details(of which TCA6416 pins |
255 | are used for keypad). | |
256 | ||
b8a3d6bc | 257 | If enabled the entire TCA6416 device will be managed through |
30ba3ead SG |
258 | this driver. |
259 | ||
b8a3d6bc TS |
260 | To compile this driver as a module, choose M here: the |
261 | module will be called tca6416_keypad. | |
30ba3ead | 262 | |
fb6c721b KM |
263 | config KEYBOARD_TCA8418 |
264 | tristate "TCA8418 Keypad Support" | |
0244ad00 | 265 | depends on I2C |
1932811f | 266 | select INPUT_MATRIXKMAP |
fb6c721b KM |
267 | help |
268 | This driver implements basic keypad functionality | |
269 | for keys connected through TCA8418 keypad decoder. | |
270 | ||
271 | Say Y here if your device has keys connected to | |
272 | TCA8418 keypad decoder. | |
273 | ||
274 | If enabled the complete TCA8418 device will be managed through | |
275 | this driver. | |
276 | ||
277 | To compile this driver as a module, choose M here: the | |
278 | module will be called tca8418_keypad. | |
279 | ||
bab7614d EM |
280 | config KEYBOARD_MATRIX |
281 | tristate "GPIO driven matrix keypad support" | |
7d6548ab | 282 | depends on GPIOLIB || COMPILE_TEST |
1932811f | 283 | select INPUT_MATRIXKMAP |
bab7614d EM |
284 | help |
285 | Enable support for GPIO driven matrix keypad. | |
286 | ||
287 | To compile this driver as a module, choose M here: the | |
288 | module will be called matrix_keypad. | |
c04cb856 | 289 | |
1da177e4 LT |
290 | config KEYBOARD_HIL_OLD |
291 | tristate "HP HIL keyboard support (simple driver)" | |
da96d0b5 | 292 | depends on GSC || HP300 |
1da177e4 LT |
293 | default y |
294 | help | |
295 | The "Human Interface Loop" is a older, 8-channel USB-like | |
296 | controller used in several Hewlett Packard models. This driver | |
297 | was adapted from the one written for m68k/hp300, and implements | |
298 | support for a keyboard attached to the HIL port, but not for | |
299 | any other types of HIL input devices like mice or tablets. | |
300 | However, it has been thoroughly tested and is stable. | |
301 | ||
302 | If you want full HIL support including support for multiple | |
09509603 | 303 | keyboards, mice, and tablets, you have to enable the |
1da177e4 LT |
304 | "HP System Device Controller i8042 Support" in the input/serio |
305 | submenu. | |
306 | ||
307 | config KEYBOARD_HIL | |
fa71c605 | 308 | tristate "HP HIL keyboard/pointer support" |
da96d0b5 | 309 | depends on GSC || HP300 |
1da177e4 LT |
310 | default y |
311 | select HP_SDC | |
312 | select HIL_MLC | |
313 | select SERIO | |
314 | help | |
315 | The "Human Interface Loop" is a older, 8-channel USB-like | |
316 | controller used in several Hewlett Packard models. | |
fa71c605 DT |
317 | This driver implements support for HIL-keyboards and pointing |
318 | devices (mice, tablets, touchscreens) attached | |
1da177e4 LT |
319 | to your machine, so normally you should say Y here. |
320 | ||
2aa2cb9e | 321 | config KEYBOARD_HP6XX |
4ff891eb | 322 | tristate "HP Jornada 6xx keyboard" |
2aa2cb9e KE |
323 | depends on SH_HP6XX |
324 | select INPUT_POLLDEV | |
325 | help | |
4ff891eb KE |
326 | Say Y here if you have a HP Jornada 620/660/680/690 and want to |
327 | support the built-in keyboard. | |
2aa2cb9e KE |
328 | |
329 | To compile this driver as a module, choose M here: the | |
330 | module will be called jornada680_kbd. | |
331 | ||
b0a4e1aa | 332 | config KEYBOARD_HP7XX |
4ff891eb | 333 | tristate "HP Jornada 7xx keyboard" |
b0a4e1aa KE |
334 | depends on SA1100_JORNADA720_SSP && SA1100_SSP |
335 | help | |
4ff891eb KE |
336 | Say Y here if you have a HP Jornada 710/720/728 and want to |
337 | support the built-in keyboard. | |
b0a4e1aa KE |
338 | |
339 | To compile this driver as a module, choose M here: the | |
340 | module will be called jornada720_kbd. | |
341 | ||
a48b2d4a FB |
342 | config KEYBOARD_LM8323 |
343 | tristate "LM8323 keypad chip" | |
0244ad00 | 344 | depends on I2C |
a48b2d4a FB |
345 | depends on LEDS_CLASS |
346 | help | |
347 | If you say yes here you get support for the National Semiconductor | |
348 | LM8323 keypad controller. | |
349 | ||
350 | To compile this driver as a module, choose M here: the | |
351 | module will be called lm8323. | |
352 | ||
0bf25a45 WS |
353 | config KEYBOARD_LM8333 |
354 | tristate "LM8333 keypad chip" | |
355 | depends on I2C | |
1932811f | 356 | select INPUT_MATRIXKMAP |
0bf25a45 WS |
357 | help |
358 | If you say yes here you get support for the National Semiconductor | |
359 | LM8333 keypad controller. | |
360 | ||
361 | To compile this driver as a module, choose M here: the | |
362 | module will be called lm8333. | |
363 | ||
cb589529 DT |
364 | config KEYBOARD_LOCOMO |
365 | tristate "LoCoMo Keyboard Support" | |
366 | depends on SHARP_LOCOMO | |
ad4e09b1 | 367 | help |
cb589529 | 368 | Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA |
ad4e09b1 KS |
369 | |
370 | To compile this driver as a module, choose M here: the | |
cb589529 DT |
371 | module will be called locomokbd. |
372 | ||
69690bec RS |
373 | config KEYBOARD_LPC32XX |
374 | tristate "LPC32XX matrix key scanner support" | |
375 | depends on ARCH_LPC32XX && OF | |
e07577e1 | 376 | select INPUT_MATRIXKMAP |
69690bec RS |
377 | help |
378 | Say Y here if you want to use NXP LPC32XX SoC key scanner interface, | |
379 | connected to a key matrix. | |
380 | ||
381 | To compile this driver as a module, choose M here: the | |
382 | module will be called lpc32xx-keys. | |
383 | ||
cb589529 DT |
384 | config KEYBOARD_MAPLE |
385 | tristate "Maple bus keyboard" | |
386 | depends on SH_DREAMCAST && MAPLE | |
387 | help | |
388 | Say Y here if you have a Dreamcast console running Linux and have | |
389 | a keyboard attached to its Maple bus. | |
390 | ||
391 | To compile this driver as a module, choose M here: the | |
392 | module will be called maple_keyb. | |
393 | ||
0baf81ba KK |
394 | config KEYBOARD_MAX7359 |
395 | tristate "Maxim MAX7359 Key Switch Controller" | |
68aeee98 | 396 | select INPUT_MATRIXKMAP |
0baf81ba KK |
397 | depends on I2C |
398 | help | |
399 | If you say yes here you get support for the Maxim MAX7359 Key | |
400 | Switch Controller chip. This providers microprocessors with | |
401 | management of up to 64 key switches | |
402 | ||
403 | To compile this driver as a module, choose M here: the | |
404 | module will be called max7359_keypad. | |
405 | ||
312e8e8a JS |
406 | config KEYBOARD_MCS |
407 | tristate "MELFAS MCS Touchkey" | |
408 | depends on I2C | |
409 | help | |
410 | Say Y here if you have the MELFAS MCS5000/5080 touchkey controller | |
411 | chip in your system. | |
412 | ||
413 | If unsure, say N. | |
414 | ||
415 | To compile this driver as a module, choose M here: the | |
416 | module will be called mcs_touchkey. | |
417 | ||
36682b81 ZJ |
418 | config KEYBOARD_MPR121 |
419 | tristate "Freescale MPR121 Touchkey" | |
420 | depends on I2C | |
421 | help | |
422 | Say Y here if you have Freescale MPR121 touchkey controller | |
423 | chip in your system. | |
424 | ||
425 | If unsure, say N. | |
426 | ||
427 | To compile this driver as a module, choose M here: the | |
428 | module will be called mpr121_touchkey. | |
429 | ||
d3dc6e23 RG |
430 | config KEYBOARD_SNVS_PWRKEY |
431 | tristate "IMX SNVS Power Key Driver" | |
432 | depends on SOC_IMX6SX | |
433 | depends on OF | |
434 | help | |
435 | This is the snvs powerkey driver for the Freescale i.MX application | |
436 | processors that are newer than i.MX6 SX. | |
437 | ||
438 | To compile this driver as a module, choose M here; the | |
439 | module will be called snvs_pwrkey. | |
440 | ||
76cdc083 AP |
441 | config KEYBOARD_IMX |
442 | tristate "IMX keypad support" | |
443 | depends on ARCH_MXC | |
1932811f | 444 | select INPUT_MATRIXKMAP |
76cdc083 AP |
445 | help |
446 | Enable support for IMX keypad port. | |
447 | ||
448 | To compile this driver as a module, choose M here: the | |
449 | module will be called imx_keypad. | |
450 | ||
cb589529 DT |
451 | config KEYBOARD_NEWTON |
452 | tristate "Newton keyboard" | |
453 | select SERIO | |
454 | help | |
455 | Say Y here if you have a Newton keyboard on a serial port. | |
456 | ||
457 | To compile this driver as a module, choose M here: the | |
458 | module will be called newtonkbd. | |
ad4e09b1 | 459 | |
1158f0f1 SI |
460 | config KEYBOARD_NOMADIK |
461 | tristate "ST-Ericsson Nomadik SKE keyboard" | |
694e33a7 | 462 | depends on (ARCH_NOMADIK || ARCH_U8500) |
1932811f | 463 | select INPUT_MATRIXKMAP |
1158f0f1 SI |
464 | help |
465 | Say Y here if you want to use a keypad provided on the SKE controller | |
466 | used on the Ux500 and Nomadik platforms | |
467 | ||
468 | To compile this driver as a module, choose M here: the | |
469 | module will be called nmk-ske-keypad. | |
470 | ||
fc4f3146 DT |
471 | config KEYBOARD_NSPIRE |
472 | tristate "TI-NSPIRE built-in keyboard" | |
473 | depends on ARCH_NSPIRE && OF | |
474 | select INPUT_MATRIXKMAP | |
475 | help | |
476 | Say Y here if you want to use the built-in keypad on TI-NSPIRE. | |
477 | ||
478 | To compile this driver as a module, choose M here: the | |
479 | module will be called nspire-keypad. | |
480 | ||
11f5b30d RI |
481 | config KEYBOARD_TEGRA |
482 | tristate "NVIDIA Tegra internal matrix keyboard controller support" | |
9eee07d3 | 483 | depends on ARCH_TEGRA && OF |
1932811f | 484 | select INPUT_MATRIXKMAP |
11f5b30d RI |
485 | help |
486 | Say Y here if you want to use a matrix keyboard connected directly | |
487 | to the internal keyboard controller on Tegra SoCs. | |
488 | ||
489 | To compile this driver as a module, choose M here: the | |
490 | module will be called tegra-kbc. | |
491 | ||
422b552d JH |
492 | config KEYBOARD_OPENCORES |
493 | tristate "OpenCores Keyboard Controller" | |
150e5928 | 494 | depends on HAS_IOMEM |
422b552d JH |
495 | help |
496 | Say Y here if you want to use the OpenCores Keyboard Controller | |
497 | http://www.opencores.org/project,keyboardcontroller | |
498 | ||
499 | To compile this driver as a module, choose M here; the | |
500 | module will be called opencores-kbd. | |
501 | ||
5a90e5bc | 502 | config KEYBOARD_PXA27x |
e0f2677f | 503 | tristate "PXA27x/PXA3xx keypad support" |
6d109465 | 504 | depends on PXA27x || PXA3xx || ARCH_MMP |
0a085a94 | 505 | select INPUT_MATRIXKMAP |
5a90e5bc | 506 | help |
bab7614d | 507 | Enable support for PXA27x/PXA3xx keypad controller. |
5a90e5bc RG |
508 | |
509 | To compile this driver as a module, choose M here: the | |
0e5f11aa | 510 | module will be called pxa27x_keypad. |
5a90e5bc | 511 | |
e0ee6298 YY |
512 | config KEYBOARD_PXA930_ROTARY |
513 | tristate "PXA930/PXA935 Enhanced Rotary Controller Support" | |
514 | depends on CPU_PXA930 || CPU_PXA935 | |
515 | help | |
516 | Enable support for PXA930/PXA935 Enhanced Rotary Controller. | |
517 | ||
518 | To compile this driver as a module, choose M here: the | |
519 | module will be called pxa930_rotary. | |
520 | ||
39325b59 TS |
521 | config KEYBOARD_PMIC8XXX |
522 | tristate "Qualcomm PMIC8XXX keypad support" | |
523 | depends on MFD_PM8XXX | |
1932811f | 524 | select INPUT_MATRIXKMAP |
39325b59 TS |
525 | help |
526 | Say Y here if you want to enable the driver for the PMIC8XXX | |
527 | keypad provided as a reference design from Qualcomm. This is intended | |
528 | to support upto 18x8 matrix based keypad design. | |
529 | ||
530 | To compile this driver as a module, choose M here: the module will | |
531 | be called pmic8xxx-keypad. | |
532 | ||
0fffed27 JS |
533 | config KEYBOARD_SAMSUNG |
534 | tristate "Samsung keypad support" | |
8d964a28 | 535 | depends on HAVE_CLK |
1932811f | 536 | select INPUT_MATRIXKMAP |
0fffed27 | 537 | help |
8d964a28 DT |
538 | Say Y here if you want to use the keypad on your Samsung mobile |
539 | device. | |
0fffed27 JS |
540 | |
541 | To compile this driver as a module, choose M here: the | |
542 | module will be called samsung-keypad. | |
543 | ||
6f2ac009 | 544 | config KEYBOARD_GOLDFISH_EVENTS |
aaa59e09 | 545 | depends on GOLDFISH || COMPILE_TEST |
6f2ac009 BS |
546 | tristate "Generic Input Event device for Goldfish" |
547 | help | |
548 | Say Y here to get an input event device for the Goldfish virtual | |
549 | device emulator. | |
550 | ||
551 | To compile this driver as a module, choose M here: the | |
552 | module will be called goldfish-events. | |
553 | ||
cb589529 DT |
554 | config KEYBOARD_STOWAWAY |
555 | tristate "Stowaway keyboard" | |
556 | select SERIO | |
b11d2127 | 557 | help |
cb589529 DT |
558 | Say Y here if you have a Stowaway keyboard on a serial port. |
559 | Stowaway compatible keyboards like Dicota Input-PDA keyboard | |
560 | are also supported by this driver. | |
b11d2127 AM |
561 | |
562 | To compile this driver as a module, choose M here: the | |
cb589529 | 563 | module will be called stowaway. |
b11d2127 | 564 | |
062589b1 GF |
565 | config KEYBOARD_ST_KEYSCAN |
566 | tristate "STMicroelectronics keyscan support" | |
567 | depends on ARCH_STI || COMPILE_TEST | |
568 | select INPUT_MATRIXKMAP | |
569 | help | |
570 | Say Y here if you want to use a keypad attached to the keyscan block | |
571 | on some STMicroelectronics SoC devices. | |
572 | ||
573 | To compile this driver as a module, choose M here: the | |
574 | module will be called st-keyscan. | |
575 | ||
cb589529 DT |
576 | config KEYBOARD_SUNKBD |
577 | tristate "Sun Type 4 and Type 5 keyboard" | |
578 | select SERIO | |
8f740ef3 | 579 | help |
cb589529 DT |
580 | Say Y here if you want to use a Sun Type 4 or Type 5 keyboard, |
581 | connected either to the Sun keyboard connector or to an serial | |
582 | (RS-232) port via a simple adapter. | |
8f740ef3 MH |
583 | |
584 | To compile this driver as a module, choose M here: the | |
cb589529 | 585 | module will be called sunkbd. |
8f740ef3 | 586 | |
795e6bf3 MD |
587 | config KEYBOARD_SH_KEYSC |
588 | tristate "SuperH KEYSC keypad support" | |
5186b8c4 | 589 | depends on ARCH_SHMOBILE || COMPILE_TEST |
795e6bf3 MD |
590 | help |
591 | Say Y here if you want to use a keypad attached to the KEYSC block | |
592 | on SuperH processors such as sh7722 and sh7343. | |
593 | ||
594 | To compile this driver as a module, choose M here: the | |
595 | module will be called sh_keysc. | |
a48b2d4a | 596 | |
76f10845 RV |
597 | config KEYBOARD_STMPE |
598 | tristate "STMPE keypad support" | |
599 | depends on MFD_STMPE | |
a4164863 | 600 | depends on OF |
1932811f | 601 | select INPUT_MATRIXKMAP |
76f10845 RV |
602 | help |
603 | Say Y here if you want to use the keypad controller on STMPE I/O | |
604 | expanders. | |
605 | ||
606 | To compile this driver as a module, choose M here: the module will be | |
607 | called stmpe-keypad. | |
608 | ||
af6a5af8 HG |
609 | config KEYBOARD_SUN4I_LRADC |
610 | tristate "Allwinner sun4i low res adc attached tablet keys support" | |
611 | depends on ARCH_SUNXI | |
612 | help | |
613 | This selects support for the Allwinner low res adc attached tablet | |
614 | keys found on Allwinner sunxi SoCs. | |
615 | ||
616 | To compile this driver as a module, choose M here: the | |
617 | module will be called sun4i-lradc-keys. | |
618 | ||
bc09dcad MA |
619 | config KEYBOARD_DAVINCI |
620 | tristate "TI DaVinci Key Scan" | |
621 | depends on ARCH_DAVINCI_DM365 | |
622 | help | |
623 | Say Y to enable keypad module support for the TI DaVinci | |
624 | platforms (DM365). | |
625 | ||
626 | To compile this driver as a module, choose M here: the | |
627 | module will be called davinci_keyscan. | |
628 | ||
d7535ffa LW |
629 | config KEYBOARD_IPAQ_MICRO |
630 | tristate "Buttons on Micro SoC (iPaq h3100,h3600,h3700)" | |
631 | depends on MFD_IPAQ_MICRO | |
632 | help | |
633 | Say Y to enable support for the buttons attached to | |
634 | Micro peripheral controller on iPAQ h3100/h3600/h3700 | |
635 | ||
636 | To compile this driver as a module, choose M here: the | |
637 | module will be called ipaq-micro-keys. | |
638 | ||
cb589529 DT |
639 | config KEYBOARD_OMAP |
640 | tristate "TI OMAP keypad support" | |
f799a3d8 | 641 | depends on ARCH_OMAP1 |
1932811f | 642 | select INPUT_MATRIXKMAP |
e06003af | 643 | help |
cb589529 | 644 | Say Y here if you want to use the OMAP keypad. |
e06003af HS |
645 | |
646 | To compile this driver as a module, choose M here: the | |
cb589529 DT |
647 | module will be called omap-keypad. |
648 | ||
a17f7955 | 649 | config KEYBOARD_OMAP4 |
f77621cc | 650 | tristate "TI OMAP4+ keypad support" |
61721c88 | 651 | depends on OF || ARCH_OMAP2PLUS |
1932811f | 652 | select INPUT_MATRIXKMAP |
a17f7955 | 653 | help |
f77621cc | 654 | Say Y here if you want to use the OMAP4+ keypad. |
a17f7955 AA |
655 | |
656 | To compile this driver as a module, choose M here: the | |
657 | module will be called omap4-keypad. | |
658 | ||
bc95df78 RK |
659 | config KEYBOARD_SPEAR |
660 | tristate "ST SPEAR keyboard support" | |
661 | depends on PLAT_SPEAR | |
1932811f | 662 | select INPUT_MATRIXKMAP |
bc95df78 RK |
663 | help |
664 | Say Y here if you want to use the SPEAR keyboard. | |
665 | ||
666 | To compile this driver as a module, choose M here: the | |
667 | module will be called spear-keboard. | |
668 | ||
09c730a4 SI |
669 | config KEYBOARD_TC3589X |
670 | tristate "TC3589X Keypad support" | |
671 | depends on MFD_TC3589X | |
1932811f | 672 | select INPUT_MATRIXKMAP |
09c730a4 SI |
673 | help |
674 | Say Y here if you want to use the keypad controller on | |
675 | TC35892/3 I/O expander. | |
676 | ||
677 | To compile this driver as a module, choose M here: the | |
678 | module will be called tc3589x-keypad. | |
679 | ||
72d1f234 JL |
680 | config KEYBOARD_TM2_TOUCHKEY |
681 | tristate "TM2 touchkey support" | |
682 | depends on I2C | |
683 | depends on LEDS_CLASS | |
684 | help | |
685 | Say Y here to enable device driver for tm2-touchkey with | |
686 | LED control for the Exynos5433 TM2 board. | |
687 | ||
688 | To compile this driver as a module, choose M here. | |
689 | module will be called tm2-touchkey. | |
690 | ||
9d834068 DB |
691 | config KEYBOARD_TWL4030 |
692 | tristate "TI TWL4030/TWL5030/TPS659x0 keypad support" | |
693 | depends on TWL4030_CORE | |
1932811f | 694 | select INPUT_MATRIXKMAP |
9d834068 DB |
695 | help |
696 | Say Y here if your board use the keypad controller on | |
697 | TWL4030 family chips. It's safe to say enable this | |
698 | even on boards that don't use the keypad controller. | |
699 | ||
700 | To compile this driver as a module, choose M here: the | |
701 | module will be called twl4030_keypad. | |
702 | ||
cb589529 DT |
703 | config KEYBOARD_XTKBD |
704 | tristate "XT keyboard" | |
705 | select SERIO | |
706 | help | |
707 | Say Y here if you want to use the old IBM PC/XT keyboard (or | |
708 | compatible) on your system. This is only possible with a | |
709 | parallel port keyboard adapter, you cannot connect it to the | |
710 | keyboard port on a PC that runs Linux. | |
711 | ||
712 | To compile this driver as a module, choose M here: the | |
713 | module will be called xtkbd. | |
e06003af | 714 | |
4a15235e WZ |
715 | config KEYBOARD_W90P910 |
716 | tristate "W90P910 Matrix Keypad support" | |
717 | depends on ARCH_W90X900 | |
1932811f | 718 | select INPUT_MATRIXKMAP |
4a15235e WZ |
719 | help |
720 | Say Y here to enable the matrix keypad on evaluation board | |
721 | based on W90P910. | |
722 | ||
723 | To compile this driver as a module, choose M here: the | |
724 | module will be called w90p910_keypad. | |
725 | ||
6af6dc2d SG |
726 | config KEYBOARD_CROS_EC |
727 | tristate "ChromeOS EC keyboard" | |
728 | select INPUT_MATRIXKMAP | |
95ecdc25 | 729 | depends on MFD_CROS_EC |
6af6dc2d SG |
730 | help |
731 | Say Y here to enable the matrix keyboard used by ChromeOS devices | |
732 | and implemented on the ChromeOS EC. You must enable one bus option | |
733 | (MFD_CROS_EC_I2C or MFD_CROS_EC_SPI) to use this. | |
734 | ||
735 | To compile this driver as a module, choose M here: the | |
736 | module will be called cros_ec_keyb. | |
737 | ||
c77fd0a4 MR |
738 | config KEYBOARD_CAP11XX |
739 | tristate "Microchip CAP11XX based touch sensors" | |
128bb95d DM |
740 | depends on OF && I2C |
741 | select REGMAP_I2C | |
742 | help | |
c77fd0a4 | 743 | Say Y here to enable the CAP11XX touch sensor driver. |
128bb95d DM |
744 | |
745 | To compile this driver as a module, choose M here: the | |
c77fd0a4 | 746 | module will be called cap11xx. |
128bb95d | 747 | |
0c7e67a9 SB |
748 | config KEYBOARD_BCM |
749 | tristate "Broadcom keypad driver" | |
750 | depends on OF && HAVE_CLK | |
751 | select INPUT_MATRIXKMAP | |
752 | default ARCH_BCM_CYGNUS | |
753 | help | |
754 | Say Y here if you want to use Broadcom keypad. | |
755 | ||
756 | To compile this driver as a module, choose M here: the | |
757 | module will be called bcm-keypad. | |
758 | ||
1da177e4 | 759 | endif |