]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * ALPS touchpad PS/2 mouse driver | |
3 | * | |
4 | * Copyright (c) 2003 Neil Brown <neilb@cse.unsw.edu.au> | |
963f626d | 5 | * Copyright (c) 2003-2005 Peter Osterlund <petero2@telia.com> |
1da177e4 LT |
6 | * Copyright (c) 2004 Dmitry Torokhov <dtor@mail.ru> |
7 | * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz> | |
1d9f2626 | 8 | * Copyright (c) 2009 Sebastian Kapfer <sebastian_kapfer@gmx.net> |
1da177e4 LT |
9 | * |
10 | * ALPS detection, tap switching and status querying info is taken from | |
11 | * tpconfig utility (by C. Scott Ananian and Bruce Kall). | |
12 | * | |
13 | * This program is free software; you can redistribute it and/or modify it | |
14 | * under the terms of the GNU General Public License version 2 as published by | |
15 | * the Free Software Foundation. | |
16 | */ | |
17 | ||
5a0e3ad6 | 18 | #include <linux/slab.h> |
1da177e4 | 19 | #include <linux/input.h> |
01ce661f | 20 | #include <linux/input/mt.h> |
1da177e4 LT |
21 | #include <linux/serio.h> |
22 | #include <linux/libps2.h> | |
073e570d | 23 | #include <linux/dmi.h> |
1da177e4 LT |
24 | |
25 | #include "psmouse.h" | |
26 | #include "alps.h" | |
27 | ||
25bded7c SF |
28 | /* |
29 | * Definitions for ALPS version 3 and 4 command mode protocol | |
30 | */ | |
31 | #define ALPS_CMD_NIBBLE_10 0x01f2 | |
32 | ||
cd401204 KC |
33 | #define ALPS_REG_BASE_RUSHMORE 0xc2c0 |
34 | #define ALPS_REG_BASE_PINNACLE 0x0000 | |
35 | ||
25bded7c SF |
36 | static const struct alps_nibble_commands alps_v3_nibble_commands[] = { |
37 | { PSMOUSE_CMD_SETPOLL, 0x00 }, /* 0 */ | |
38 | { PSMOUSE_CMD_RESET_DIS, 0x00 }, /* 1 */ | |
39 | { PSMOUSE_CMD_SETSCALE21, 0x00 }, /* 2 */ | |
40 | { PSMOUSE_CMD_SETRATE, 0x0a }, /* 3 */ | |
41 | { PSMOUSE_CMD_SETRATE, 0x14 }, /* 4 */ | |
42 | { PSMOUSE_CMD_SETRATE, 0x28 }, /* 5 */ | |
43 | { PSMOUSE_CMD_SETRATE, 0x3c }, /* 6 */ | |
44 | { PSMOUSE_CMD_SETRATE, 0x50 }, /* 7 */ | |
45 | { PSMOUSE_CMD_SETRATE, 0x64 }, /* 8 */ | |
46 | { PSMOUSE_CMD_SETRATE, 0xc8 }, /* 9 */ | |
47 | { ALPS_CMD_NIBBLE_10, 0x00 }, /* a */ | |
48 | { PSMOUSE_CMD_SETRES, 0x00 }, /* b */ | |
49 | { PSMOUSE_CMD_SETRES, 0x01 }, /* c */ | |
50 | { PSMOUSE_CMD_SETRES, 0x02 }, /* d */ | |
51 | { PSMOUSE_CMD_SETRES, 0x03 }, /* e */ | |
52 | { PSMOUSE_CMD_SETSCALE11, 0x00 }, /* f */ | |
53 | }; | |
54 | ||
55 | static const struct alps_nibble_commands alps_v4_nibble_commands[] = { | |
56 | { PSMOUSE_CMD_ENABLE, 0x00 }, /* 0 */ | |
57 | { PSMOUSE_CMD_RESET_DIS, 0x00 }, /* 1 */ | |
58 | { PSMOUSE_CMD_SETSCALE21, 0x00 }, /* 2 */ | |
59 | { PSMOUSE_CMD_SETRATE, 0x0a }, /* 3 */ | |
60 | { PSMOUSE_CMD_SETRATE, 0x14 }, /* 4 */ | |
61 | { PSMOUSE_CMD_SETRATE, 0x28 }, /* 5 */ | |
62 | { PSMOUSE_CMD_SETRATE, 0x3c }, /* 6 */ | |
63 | { PSMOUSE_CMD_SETRATE, 0x50 }, /* 7 */ | |
64 | { PSMOUSE_CMD_SETRATE, 0x64 }, /* 8 */ | |
65 | { PSMOUSE_CMD_SETRATE, 0xc8 }, /* 9 */ | |
66 | { ALPS_CMD_NIBBLE_10, 0x00 }, /* a */ | |
67 | { PSMOUSE_CMD_SETRES, 0x00 }, /* b */ | |
68 | { PSMOUSE_CMD_SETRES, 0x01 }, /* c */ | |
69 | { PSMOUSE_CMD_SETRES, 0x02 }, /* d */ | |
70 | { PSMOUSE_CMD_SETRES, 0x03 }, /* e */ | |
71 | { PSMOUSE_CMD_SETSCALE11, 0x00 }, /* f */ | |
72 | }; | |
73 | ||
95f75e91 YT |
74 | static const struct alps_nibble_commands alps_v6_nibble_commands[] = { |
75 | { PSMOUSE_CMD_ENABLE, 0x00 }, /* 0 */ | |
76 | { PSMOUSE_CMD_SETRATE, 0x0a }, /* 1 */ | |
77 | { PSMOUSE_CMD_SETRATE, 0x14 }, /* 2 */ | |
78 | { PSMOUSE_CMD_SETRATE, 0x28 }, /* 3 */ | |
79 | { PSMOUSE_CMD_SETRATE, 0x3c }, /* 4 */ | |
80 | { PSMOUSE_CMD_SETRATE, 0x50 }, /* 5 */ | |
81 | { PSMOUSE_CMD_SETRATE, 0x64 }, /* 6 */ | |
82 | { PSMOUSE_CMD_SETRATE, 0xc8 }, /* 7 */ | |
83 | { PSMOUSE_CMD_GETID, 0x00 }, /* 8 */ | |
84 | { PSMOUSE_CMD_GETINFO, 0x00 }, /* 9 */ | |
85 | { PSMOUSE_CMD_SETRES, 0x00 }, /* a */ | |
86 | { PSMOUSE_CMD_SETRES, 0x01 }, /* b */ | |
87 | { PSMOUSE_CMD_SETRES, 0x02 }, /* c */ | |
88 | { PSMOUSE_CMD_SETRES, 0x03 }, /* d */ | |
89 | { PSMOUSE_CMD_SETSCALE21, 0x00 }, /* e */ | |
90 | { PSMOUSE_CMD_SETSCALE11, 0x00 }, /* f */ | |
91 | }; | |
92 | ||
25bded7c | 93 | |
71bb21b6 ML |
94 | #define ALPS_DUALPOINT 0x02 /* touchpad has trackstick */ |
95 | #define ALPS_PASS 0x04 /* device has a pass-through port */ | |
96 | ||
97 | #define ALPS_WHEEL 0x08 /* hardware wheel present */ | |
98 | #define ALPS_FW_BK_1 0x10 /* front & back buttons present */ | |
99 | #define ALPS_FW_BK_2 0x20 /* front & back buttons present */ | |
100 | #define ALPS_FOUR_BUTTONS 0x40 /* 4 direction button present */ | |
1d9f2626 SK |
101 | #define ALPS_PS2_INTERLEAVED 0x80 /* 3-byte PS/2 packet interleaved with |
102 | 6-byte ALPS packet */ | |
073e570d | 103 | #define ALPS_DELL 0x100 /* device is a Dell laptop */ |
3808843c | 104 | #define ALPS_BUTTONPAD 0x200 /* device is a clickpad */ |
1da177e4 | 105 | |
e38de678 | 106 | static const struct alps_model_info alps_model_data[] = { |
8326bb57 DT |
107 | { { 0x32, 0x02, 0x14 }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT } }, /* Toshiba Salellite Pro M10 */ |
108 | { { 0x33, 0x02, 0x0a }, 0x00, { ALPS_PROTO_V1, 0x88, 0xf8, 0 } }, /* UMAX-530T */ | |
109 | { { 0x53, 0x02, 0x0a }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } }, | |
110 | { { 0x53, 0x02, 0x14 }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } }, | |
111 | { { 0x60, 0x03, 0xc8 }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } }, /* HP ze1115 */ | |
112 | { { 0x63, 0x02, 0x0a }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } }, | |
113 | { { 0x63, 0x02, 0x14 }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } }, | |
114 | { { 0x63, 0x02, 0x28 }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 } }, /* Fujitsu Siemens S6010 */ | |
115 | { { 0x63, 0x02, 0x3c }, 0x00, { ALPS_PROTO_V2, 0x8f, 0x8f, ALPS_WHEEL } }, /* Toshiba Satellite S2400-103 */ | |
116 | { { 0x63, 0x02, 0x50 }, 0x00, { ALPS_PROTO_V2, 0xef, 0xef, ALPS_FW_BK_1 } }, /* NEC Versa L320 */ | |
117 | { { 0x63, 0x02, 0x64 }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } }, | |
118 | { { 0x63, 0x03, 0xc8 }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT } }, /* Dell Latitude D800 */ | |
119 | { { 0x73, 0x00, 0x0a }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_DUALPOINT } }, /* ThinkPad R61 8918-5QG */ | |
120 | { { 0x73, 0x02, 0x0a }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } }, | |
121 | { { 0x73, 0x02, 0x14 }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 } }, /* Ahtec Laptop */ | |
626b9da0 DT |
122 | |
123 | /* | |
124 | * XXX This entry is suspicious. First byte has zero lower nibble, | |
125 | * which is what a normal mouse would report. Also, the value 0x0e | |
126 | * isn't valid per PS/2 spec. | |
127 | */ | |
128 | { { 0x20, 0x02, 0x0e }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT } }, | |
129 | ||
8326bb57 DT |
130 | { { 0x22, 0x02, 0x0a }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT } }, |
131 | { { 0x22, 0x02, 0x14 }, 0x00, { ALPS_PROTO_V2, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT } }, /* Dell Latitude D600 */ | |
1d9f2626 | 132 | /* Dell Latitude E5500, E6400, E6500, Precision M4400 */ |
8326bb57 DT |
133 | { { 0x62, 0x02, 0x14 }, 0x00, { ALPS_PROTO_V2, 0xcf, 0xcf, |
134 | ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED } }, | |
135 | { { 0x73, 0x00, 0x14 }, 0x00, { ALPS_PROTO_V6, 0xff, 0xff, ALPS_DUALPOINT } }, /* Dell XT2 */ | |
136 | { { 0x73, 0x02, 0x50 }, 0x00, { ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_FOUR_BUTTONS } }, /* Dell Vostro 1400 */ | |
137 | { { 0x52, 0x01, 0x14 }, 0x00, { ALPS_PROTO_V2, 0xff, 0xff, | |
138 | ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED } }, /* Toshiba Tecra A11-11L */ | |
139 | { { 0x73, 0x02, 0x64 }, 0x8a, { ALPS_PROTO_V4, 0x8f, 0x8f, 0 } }, | |
1da177e4 LT |
140 | }; |
141 | ||
3296f71c DT |
142 | static const struct alps_protocol_info alps_v3_protocol_data = { |
143 | ALPS_PROTO_V3, 0x8f, 0x8f, ALPS_DUALPOINT | |
144 | }; | |
145 | ||
146 | static const struct alps_protocol_info alps_v3_rushmore_data = { | |
147 | ALPS_PROTO_V3_RUSHMORE, 0x8f, 0x8f, ALPS_DUALPOINT | |
148 | }; | |
149 | ||
150 | static const struct alps_protocol_info alps_v5_protocol_data = { | |
151 | ALPS_PROTO_V5, 0xc8, 0xd8, 0 | |
152 | }; | |
153 | ||
154 | static const struct alps_protocol_info alps_v7_protocol_data = { | |
155 | ALPS_PROTO_V7, 0x48, 0x48, ALPS_DUALPOINT | |
156 | }; | |
157 | ||
3db5b9f7 MO |
158 | static const struct alps_protocol_info alps_v8_protocol_data = { |
159 | ALPS_PROTO_V8, 0x18, 0x18, 0 | |
160 | }; | |
161 | ||
24af5cb9 KC |
162 | static void alps_set_abs_params_st(struct alps_data *priv, |
163 | struct input_dev *dev1); | |
688ea364 HG |
164 | static void alps_set_abs_params_semi_mt(struct alps_data *priv, |
165 | struct input_dev *dev1); | |
8eccd393 MO |
166 | static void alps_set_abs_params_v7(struct alps_data *priv, |
167 | struct input_dev *dev1); | |
3db5b9f7 MO |
168 | static void alps_set_abs_params_ss4_v2(struct alps_data *priv, |
169 | struct input_dev *dev1); | |
24af5cb9 | 170 | |
d4b347b2 | 171 | /* Packet formats are described in Documentation/input/alps.txt */ |
1da177e4 | 172 | |
99df65e7 | 173 | static bool alps_is_valid_first_byte(struct alps_data *priv, |
1d9f2626 SK |
174 | unsigned char data) |
175 | { | |
99df65e7 | 176 | return (data & priv->mask0) == priv->byte0; |
1d9f2626 SK |
177 | } |
178 | ||
04aae283 | 179 | static void alps_report_buttons(struct input_dev *dev1, struct input_dev *dev2, |
1d9f2626 SK |
180 | int left, int right, int middle) |
181 | { | |
c91ed059 MB |
182 | struct input_dev *dev; |
183 | ||
184 | /* | |
185 | * If shared button has already been reported on the | |
186 | * other device (dev2) then this event should be also | |
187 | * sent through that device. | |
188 | */ | |
04aae283 | 189 | dev = (dev2 && test_bit(BTN_LEFT, dev2->key)) ? dev2 : dev1; |
c91ed059 MB |
190 | input_report_key(dev, BTN_LEFT, left); |
191 | ||
04aae283 | 192 | dev = (dev2 && test_bit(BTN_RIGHT, dev2->key)) ? dev2 : dev1; |
c91ed059 MB |
193 | input_report_key(dev, BTN_RIGHT, right); |
194 | ||
04aae283 | 195 | dev = (dev2 && test_bit(BTN_MIDDLE, dev2->key)) ? dev2 : dev1; |
c91ed059 MB |
196 | input_report_key(dev, BTN_MIDDLE, middle); |
197 | ||
198 | /* | |
199 | * Sync the _other_ device now, we'll do the first | |
200 | * device later once we report the rest of the events. | |
201 | */ | |
04aae283 PR |
202 | if (dev2) |
203 | input_sync(dev2); | |
1d9f2626 SK |
204 | } |
205 | ||
25bded7c | 206 | static void alps_process_packet_v1_v2(struct psmouse *psmouse) |
1da177e4 LT |
207 | { |
208 | struct alps_data *priv = psmouse->private; | |
209 | unsigned char *packet = psmouse->packet; | |
2e5b636b DT |
210 | struct input_dev *dev = psmouse->dev; |
211 | struct input_dev *dev2 = priv->dev2; | |
1da177e4 | 212 | int x, y, z, ges, fin, left, right, middle; |
c30b4c10 | 213 | int back = 0, forward = 0; |
1da177e4 | 214 | |
99df65e7 | 215 | if (priv->proto_version == ALPS_PROTO_V1) { |
d2f4012f YM |
216 | left = packet[2] & 0x10; |
217 | right = packet[2] & 0x08; | |
1da177e4 LT |
218 | middle = 0; |
219 | x = packet[1] | ((packet[0] & 0x07) << 7); | |
220 | y = packet[4] | ((packet[3] & 0x07) << 7); | |
221 | z = packet[5]; | |
222 | } else { | |
223 | left = packet[3] & 1; | |
224 | right = packet[3] & 2; | |
225 | middle = packet[3] & 4; | |
226 | x = packet[1] | ((packet[2] & 0x78) << (7 - 3)); | |
227 | y = packet[4] | ((packet[3] & 0x70) << (7 - 4)); | |
228 | z = packet[5]; | |
229 | } | |
230 | ||
99df65e7 | 231 | if (priv->flags & ALPS_FW_BK_1) { |
3c00bb96 LK |
232 | back = packet[0] & 0x10; |
233 | forward = packet[2] & 4; | |
c30b4c10 ICR |
234 | } |
235 | ||
99df65e7 | 236 | if (priv->flags & ALPS_FW_BK_2) { |
c30b4c10 ICR |
237 | back = packet[3] & 4; |
238 | forward = packet[2] & 4; | |
239 | if ((middle = forward && back)) | |
240 | forward = back = 0; | |
241 | } | |
242 | ||
1da177e4 LT |
243 | ges = packet[2] & 1; |
244 | fin = packet[2] & 2; | |
245 | ||
99df65e7 | 246 | if ((priv->flags & ALPS_DUALPOINT) && z == 127) { |
1da177e4 LT |
247 | input_report_rel(dev2, REL_X, (x > 383 ? (x - 768) : x)); |
248 | input_report_rel(dev2, REL_Y, -(y > 255 ? (y - 512) : y)); | |
d7ed5d88 | 249 | |
04aae283 | 250 | alps_report_buttons(dev2, dev, left, right, middle); |
d7ed5d88 | 251 | |
1da177e4 LT |
252 | input_sync(dev2); |
253 | return; | |
254 | } | |
255 | ||
073e570d | 256 | /* Dell non interleaved V2 dualpoint has separate stick button bits */ |
92bac83d | 257 | if (priv->proto_version == ALPS_PROTO_V2 && |
073e570d | 258 | priv->flags == (ALPS_DELL | ALPS_PASS | ALPS_DUALPOINT)) { |
92bac83d HG |
259 | left |= packet[0] & 1; |
260 | right |= packet[0] & 2; | |
261 | middle |= packet[0] & 4; | |
262 | } | |
263 | ||
04aae283 | 264 | alps_report_buttons(dev, dev2, left, right, middle); |
d7ed5d88 | 265 | |
1da177e4 | 266 | /* Convert hardware tap to a reasonable Z value */ |
71bb21b6 ML |
267 | if (ges && !fin) |
268 | z = 40; | |
1da177e4 LT |
269 | |
270 | /* | |
271 | * A "tap and drag" operation is reported by the hardware as a transition | |
272 | * from (!fin && ges) to (fin && ges). This should be translated to the | |
273 | * sequence Z>0, Z==0, Z>0, so the Z==0 event has to be generated manually. | |
274 | */ | |
275 | if (ges && fin && !priv->prev_fin) { | |
276 | input_report_abs(dev, ABS_X, x); | |
277 | input_report_abs(dev, ABS_Y, y); | |
278 | input_report_abs(dev, ABS_PRESSURE, 0); | |
279 | input_report_key(dev, BTN_TOOL_FINGER, 0); | |
280 | input_sync(dev); | |
281 | } | |
282 | priv->prev_fin = fin; | |
283 | ||
71bb21b6 ML |
284 | if (z > 30) |
285 | input_report_key(dev, BTN_TOUCH, 1); | |
286 | if (z < 25) | |
287 | input_report_key(dev, BTN_TOUCH, 0); | |
1da177e4 LT |
288 | |
289 | if (z > 0) { | |
290 | input_report_abs(dev, ABS_X, x); | |
291 | input_report_abs(dev, ABS_Y, y); | |
292 | } | |
293 | ||
294 | input_report_abs(dev, ABS_PRESSURE, z); | |
295 | input_report_key(dev, BTN_TOOL_FINGER, z > 0); | |
296 | ||
99df65e7 | 297 | if (priv->flags & ALPS_WHEEL) |
e6c047b9 | 298 | input_report_rel(dev, REL_WHEEL, ((packet[2] << 1) & 0x08) - ((packet[0] >> 4) & 0x07)); |
1da177e4 | 299 | |
99df65e7 | 300 | if (priv->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) { |
c30b4c10 ICR |
301 | input_report_key(dev, BTN_FORWARD, forward); |
302 | input_report_key(dev, BTN_BACK, back); | |
1da177e4 LT |
303 | } |
304 | ||
99df65e7 | 305 | if (priv->flags & ALPS_FOUR_BUTTONS) { |
71bb21b6 ML |
306 | input_report_key(dev, BTN_0, packet[2] & 4); |
307 | input_report_key(dev, BTN_1, packet[0] & 0x10); | |
308 | input_report_key(dev, BTN_2, packet[3] & 4); | |
309 | input_report_key(dev, BTN_3, packet[0] & 0x20); | |
310 | } | |
311 | ||
1da177e4 LT |
312 | input_sync(dev); |
313 | } | |
314 | ||
036e6c7b HG |
315 | static void alps_get_bitmap_points(unsigned int map, |
316 | struct alps_bitmap_point *low, | |
317 | struct alps_bitmap_point *high, | |
318 | int *fingers) | |
319 | { | |
320 | struct alps_bitmap_point *point; | |
321 | int i, bit, prev_bit = 0; | |
322 | ||
323 | point = low; | |
324 | for (i = 0; map != 0; i++, map >>= 1) { | |
325 | bit = map & 1; | |
326 | if (bit) { | |
327 | if (!prev_bit) { | |
328 | point->start_bit = i; | |
105affbf | 329 | point->num_bits = 0; |
036e6c7b HG |
330 | (*fingers)++; |
331 | } | |
332 | point->num_bits++; | |
333 | } else { | |
334 | if (prev_bit) | |
335 | point = high; | |
036e6c7b HG |
336 | } |
337 | prev_bit = bit; | |
338 | } | |
339 | } | |
340 | ||
01ce661f | 341 | /* |
dccf1dd8 | 342 | * Process bitmap data from semi-mt protocols. Returns the number of |
01ce661f SF |
343 | * fingers detected. A return value of 0 means at least one of the |
344 | * bitmaps was empty. | |
345 | * | |
346 | * The bitmaps don't have enough data to track fingers, so this function | |
347 | * only generates points representing a bounding box of all contacts. | |
02d04254 | 348 | * These points are returned in fields->mt when the return value |
01ce661f SF |
349 | * is greater than 0. |
350 | */ | |
7a9f73e7 | 351 | static int alps_process_bitmap(struct alps_data *priv, |
02d04254 | 352 | struct alps_fields *fields) |
01ce661f | 353 | { |
4dd26573 | 354 | int i, fingers_x = 0, fingers_y = 0, fingers, closest; |
01ce661f SF |
355 | struct alps_bitmap_point x_low = {0,}, x_high = {0,}; |
356 | struct alps_bitmap_point y_low = {0,}, y_high = {0,}; | |
4dd26573 | 357 | struct input_mt_pos corner[4]; |
01ce661f | 358 | |
02d04254 | 359 | if (!fields->x_map || !fields->y_map) |
01ce661f SF |
360 | return 0; |
361 | ||
02d04254 HG |
362 | alps_get_bitmap_points(fields->x_map, &x_low, &x_high, &fingers_x); |
363 | alps_get_bitmap_points(fields->y_map, &y_low, &y_high, &fingers_y); | |
01ce661f SF |
364 | |
365 | /* | |
366 | * Fingers can overlap, so we use the maximum count of fingers | |
367 | * on either axis as the finger count. | |
368 | */ | |
369 | fingers = max(fingers_x, fingers_y); | |
370 | ||
371 | /* | |
20bea68b HG |
372 | * If an axis reports only a single contact, we have overlapping or |
373 | * adjacent fingers. Divide the single contact between the two points. | |
01ce661f | 374 | */ |
20bea68b | 375 | if (fingers_x == 1) { |
28835f45 | 376 | i = (x_low.num_bits - 1) / 2; |
20bea68b HG |
377 | x_low.num_bits = x_low.num_bits - i; |
378 | x_high.start_bit = x_low.start_bit + i; | |
379 | x_high.num_bits = max(i, 1); | |
380 | } | |
381 | if (fingers_y == 1) { | |
28835f45 | 382 | i = (y_low.num_bits - 1) / 2; |
20bea68b HG |
383 | y_low.num_bits = y_low.num_bits - i; |
384 | y_high.start_bit = y_low.start_bit + i; | |
385 | y_high.num_bits = max(i, 1); | |
01ce661f SF |
386 | } |
387 | ||
4dd26573 HG |
388 | /* top-left corner */ |
389 | corner[0].x = | |
02d04254 HG |
390 | (priv->x_max * (2 * x_low.start_bit + x_low.num_bits - 1)) / |
391 | (2 * (priv->x_bits - 1)); | |
4dd26573 | 392 | corner[0].y = |
02d04254 HG |
393 | (priv->y_max * (2 * y_low.start_bit + y_low.num_bits - 1)) / |
394 | (2 * (priv->y_bits - 1)); | |
01ce661f | 395 | |
4dd26573 HG |
396 | /* top-right corner */ |
397 | corner[1].x = | |
02d04254 HG |
398 | (priv->x_max * (2 * x_high.start_bit + x_high.num_bits - 1)) / |
399 | (2 * (priv->x_bits - 1)); | |
4dd26573 HG |
400 | corner[1].y = |
401 | (priv->y_max * (2 * y_low.start_bit + y_low.num_bits - 1)) / | |
402 | (2 * (priv->y_bits - 1)); | |
403 | ||
404 | /* bottom-right corner */ | |
405 | corner[2].x = | |
406 | (priv->x_max * (2 * x_high.start_bit + x_high.num_bits - 1)) / | |
407 | (2 * (priv->x_bits - 1)); | |
408 | corner[2].y = | |
409 | (priv->y_max * (2 * y_high.start_bit + y_high.num_bits - 1)) / | |
410 | (2 * (priv->y_bits - 1)); | |
411 | ||
412 | /* bottom-left corner */ | |
413 | corner[3].x = | |
414 | (priv->x_max * (2 * x_low.start_bit + x_low.num_bits - 1)) / | |
415 | (2 * (priv->x_bits - 1)); | |
416 | corner[3].y = | |
02d04254 HG |
417 | (priv->y_max * (2 * y_high.start_bit + y_high.num_bits - 1)) / |
418 | (2 * (priv->y_bits - 1)); | |
01ce661f | 419 | |
dccf1dd8 HG |
420 | /* x-bitmap order is reversed on v5 touchpads */ |
421 | if (priv->proto_version == ALPS_PROTO_V5) { | |
422 | for (i = 0; i < 4; i++) | |
423 | corner[i].x = priv->x_max - corner[i].x; | |
424 | } | |
425 | ||
426 | /* y-bitmap order is reversed on v3 and v4 touchpads */ | |
427 | if (priv->proto_version == ALPS_PROTO_V3 || | |
428 | priv->proto_version == ALPS_PROTO_V4) { | |
4dd26573 HG |
429 | for (i = 0; i < 4; i++) |
430 | corner[i].y = priv->y_max - corner[i].y; | |
431 | } | |
432 | ||
433 | /* | |
434 | * We only select a corner for the second touch once per 2 finger | |
435 | * touch sequence to avoid the chosen corner (and thus the coordinates) | |
436 | * jumping around when the first touch is in the middle. | |
437 | */ | |
438 | if (priv->second_touch == -1) { | |
439 | /* Find corner closest to our st coordinates */ | |
440 | closest = 0x7fffffff; | |
441 | for (i = 0; i < 4; i++) { | |
442 | int dx = fields->st.x - corner[i].x; | |
443 | int dy = fields->st.y - corner[i].y; | |
444 | int distance = dx * dx + dy * dy; | |
445 | ||
446 | if (distance < closest) { | |
447 | priv->second_touch = i; | |
448 | closest = distance; | |
449 | } | |
450 | } | |
451 | /* And select the opposite corner to use for the 2nd touch */ | |
452 | priv->second_touch = (priv->second_touch + 2) % 4; | |
40e8f53b HG |
453 | } |
454 | ||
4dd26573 HG |
455 | fields->mt[0] = fields->st; |
456 | fields->mt[1] = corner[priv->second_touch]; | |
457 | ||
01ce661f SF |
458 | return fingers; |
459 | } | |
460 | ||
cdf333ef | 461 | static void alps_set_slot(struct input_dev *dev, int slot, int x, int y) |
01ce661f SF |
462 | { |
463 | input_mt_slot(dev, slot); | |
cdf333ef HG |
464 | input_mt_report_slot_state(dev, MT_TOOL_FINGER, true); |
465 | input_report_abs(dev, ABS_MT_POSITION_X, x); | |
466 | input_report_abs(dev, ABS_MT_POSITION_Y, y); | |
01ce661f SF |
467 | } |
468 | ||
cdf333ef | 469 | static void alps_report_mt_data(struct psmouse *psmouse, int n) |
01ce661f | 470 | { |
02d04254 HG |
471 | struct alps_data *priv = psmouse->private; |
472 | struct input_dev *dev = psmouse->dev; | |
473 | struct alps_fields *f = &priv->f; | |
cdf333ef HG |
474 | int i, slot[MAX_TOUCHES]; |
475 | ||
448c7f38 | 476 | input_mt_assign_slots(dev, slot, f->mt, n, 0); |
cdf333ef HG |
477 | for (i = 0; i < n; i++) |
478 | alps_set_slot(dev, slot[i], f->mt[i].x, f->mt[i].y); | |
02d04254 | 479 | |
cdf333ef | 480 | input_mt_sync_frame(dev); |
01ce661f SF |
481 | } |
482 | ||
68c21870 HG |
483 | static void alps_report_semi_mt_data(struct psmouse *psmouse, int fingers) |
484 | { | |
485 | struct alps_data *priv = psmouse->private; | |
486 | struct input_dev *dev = psmouse->dev; | |
487 | struct alps_fields *f = &priv->f; | |
488 | ||
489 | /* Use st data when we don't have mt data */ | |
490 | if (fingers < 2) { | |
491 | f->mt[0].x = f->st.x; | |
492 | f->mt[0].y = f->st.y; | |
493 | fingers = f->pressure > 0 ? 1 : 0; | |
4dd26573 | 494 | priv->second_touch = -1; |
68c21870 HG |
495 | } |
496 | ||
1662c033 HG |
497 | if (fingers >= 1) |
498 | alps_set_slot(dev, 0, f->mt[0].x, f->mt[0].y); | |
499 | if (fingers >= 2) | |
500 | alps_set_slot(dev, 1, f->mt[1].x, f->mt[1].y); | |
501 | input_mt_sync_frame(dev); | |
68c21870 HG |
502 | |
503 | input_mt_report_finger_count(dev, fingers); | |
504 | ||
505 | input_report_key(dev, BTN_LEFT, f->left); | |
506 | input_report_key(dev, BTN_RIGHT, f->right); | |
507 | input_report_key(dev, BTN_MIDDLE, f->middle); | |
508 | ||
509 | input_report_abs(dev, ABS_PRESSURE, f->pressure); | |
510 | ||
511 | input_sync(dev); | |
512 | } | |
513 | ||
25bded7c SF |
514 | static void alps_process_trackstick_packet_v3(struct psmouse *psmouse) |
515 | { | |
516 | struct alps_data *priv = psmouse->private; | |
517 | unsigned char *packet = psmouse->packet; | |
518 | struct input_dev *dev = priv->dev2; | |
519 | int x, y, z, left, right, middle; | |
520 | ||
34412ba2 PR |
521 | /* It should be a DualPoint when received trackstick packet */ |
522 | if (!(priv->flags & ALPS_DUALPOINT)) { | |
523 | psmouse_warn(psmouse, | |
524 | "Rejected trackstick packet from non DualPoint device"); | |
525 | return; | |
526 | } | |
527 | ||
25bded7c SF |
528 | /* Sanity check packet */ |
529 | if (!(packet[0] & 0x40)) { | |
530 | psmouse_dbg(psmouse, "Bad trackstick packet, discarding\n"); | |
531 | return; | |
532 | } | |
533 | ||
534 | /* | |
535 | * There's a special packet that seems to indicate the end | |
536 | * of a stream of trackstick data. Filter these out. | |
537 | */ | |
538 | if (packet[1] == 0x7f && packet[2] == 0x7f && packet[4] == 0x7f) | |
539 | return; | |
540 | ||
541 | x = (s8)(((packet[0] & 0x20) << 2) | (packet[1] & 0x7f)); | |
542 | y = (s8)(((packet[0] & 0x10) << 3) | (packet[2] & 0x7f)); | |
543 | z = (packet[4] & 0x7c) >> 2; | |
544 | ||
545 | /* | |
546 | * The x and y values tend to be quite large, and when used | |
547 | * alone the trackstick is difficult to use. Scale them down | |
548 | * to compensate. | |
549 | */ | |
550 | x /= 8; | |
551 | y /= 8; | |
552 | ||
553 | input_report_rel(dev, REL_X, x); | |
554 | input_report_rel(dev, REL_Y, -y); | |
555 | ||
556 | /* | |
557 | * Most ALPS models report the trackstick buttons in the touchpad | |
558 | * packets, but a few report them here. No reliable way has been | |
559 | * found to differentiate between the models upfront, so we enable | |
560 | * the quirk in response to seeing a button press in the trackstick | |
561 | * packet. | |
562 | */ | |
563 | left = packet[3] & 0x01; | |
564 | right = packet[3] & 0x02; | |
565 | middle = packet[3] & 0x04; | |
566 | ||
567 | if (!(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS) && | |
568 | (left || right || middle)) | |
569 | priv->quirks |= ALPS_QUIRK_TRACKSTICK_BUTTONS; | |
570 | ||
571 | if (priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS) { | |
572 | input_report_key(dev, BTN_LEFT, left); | |
573 | input_report_key(dev, BTN_RIGHT, right); | |
574 | input_report_key(dev, BTN_MIDDLE, middle); | |
575 | } | |
576 | ||
577 | input_sync(dev); | |
578 | return; | |
579 | } | |
580 | ||
f85e5001 KC |
581 | static void alps_decode_buttons_v3(struct alps_fields *f, unsigned char *p) |
582 | { | |
583 | f->left = !!(p[3] & 0x01); | |
584 | f->right = !!(p[3] & 0x02); | |
585 | f->middle = !!(p[3] & 0x04); | |
586 | ||
587 | f->ts_left = !!(p[3] & 0x10); | |
588 | f->ts_right = !!(p[3] & 0x20); | |
589 | f->ts_middle = !!(p[3] & 0x40); | |
590 | } | |
591 | ||
38c11eaa | 592 | static int alps_decode_pinnacle(struct alps_fields *f, unsigned char *p, |
ee65d4b3 | 593 | struct psmouse *psmouse) |
f85e5001 KC |
594 | { |
595 | f->first_mp = !!(p[4] & 0x40); | |
596 | f->is_mp = !!(p[0] & 0x40); | |
597 | ||
a839cd57 HG |
598 | if (f->is_mp) { |
599 | f->fingers = (p[5] & 0x3) + 1; | |
600 | f->x_map = ((p[4] & 0x7e) << 8) | | |
601 | ((p[1] & 0x7f) << 2) | | |
602 | ((p[0] & 0x30) >> 4); | |
603 | f->y_map = ((p[3] & 0x70) << 4) | | |
604 | ((p[2] & 0x7f) << 1) | | |
605 | (p[4] & 0x01); | |
606 | } else { | |
607 | f->st.x = ((p[1] & 0x7f) << 4) | ((p[4] & 0x30) >> 2) | | |
608 | ((p[0] & 0x30) >> 4); | |
609 | f->st.y = ((p[2] & 0x7f) << 4) | (p[4] & 0x0f); | |
610 | f->pressure = p[5] & 0x7f; | |
f85e5001 | 611 | |
a839cd57 HG |
612 | alps_decode_buttons_v3(f, p); |
613 | } | |
38c11eaa HG |
614 | |
615 | return 0; | |
f85e5001 KC |
616 | } |
617 | ||
38c11eaa | 618 | static int alps_decode_rushmore(struct alps_fields *f, unsigned char *p, |
ee65d4b3 | 619 | struct psmouse *psmouse) |
1302bac3 | 620 | { |
aab9cf7b | 621 | f->first_mp = !!(p[4] & 0x40); |
f105e34a | 622 | f->is_mp = !!(p[5] & 0x40); |
aab9cf7b | 623 | |
a839cd57 HG |
624 | if (f->is_mp) { |
625 | f->fingers = max((p[5] & 0x3), ((p[5] >> 2) & 0x3)) + 1; | |
626 | f->x_map = ((p[5] & 0x10) << 11) | | |
627 | ((p[4] & 0x7e) << 8) | | |
628 | ((p[1] & 0x7f) << 2) | | |
629 | ((p[0] & 0x30) >> 4); | |
630 | f->y_map = ((p[5] & 0x20) << 6) | | |
631 | ((p[3] & 0x70) << 4) | | |
632 | ((p[2] & 0x7f) << 1) | | |
633 | (p[4] & 0x01); | |
634 | } else { | |
635 | f->st.x = ((p[1] & 0x7f) << 4) | ((p[4] & 0x30) >> 2) | | |
636 | ((p[0] & 0x30) >> 4); | |
637 | f->st.y = ((p[2] & 0x7f) << 4) | (p[4] & 0x0f); | |
638 | f->pressure = p[5] & 0x7f; | |
639 | ||
640 | alps_decode_buttons_v3(f, p); | |
641 | } | |
38c11eaa HG |
642 | |
643 | return 0; | |
1302bac3 KC |
644 | } |
645 | ||
38c11eaa | 646 | static int alps_decode_dolphin(struct alps_fields *f, unsigned char *p, |
ee65d4b3 | 647 | struct psmouse *psmouse) |
75af9e56 | 648 | { |
ee65d4b3 YT |
649 | u64 palm_data = 0; |
650 | struct alps_data *priv = psmouse->private; | |
651 | ||
75af9e56 DT |
652 | f->first_mp = !!(p[0] & 0x02); |
653 | f->is_mp = !!(p[0] & 0x20); | |
654 | ||
ee65d4b3 | 655 | if (!f->is_mp) { |
02d04254 HG |
656 | f->st.x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7)); |
657 | f->st.y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3)); | |
658 | f->pressure = (p[0] & 4) ? 0 : p[5] & 0x7f; | |
ee65d4b3 YT |
659 | alps_decode_buttons_v3(f, p); |
660 | } else { | |
661 | f->fingers = ((p[0] & 0x6) >> 1 | | |
75af9e56 | 662 | (p[0] & 0x10) >> 2); |
75af9e56 | 663 | |
ee65d4b3 YT |
664 | palm_data = (p[1] & 0x7f) | |
665 | ((p[2] & 0x7f) << 7) | | |
666 | ((p[4] & 0x7f) << 14) | | |
667 | ((p[5] & 0x7f) << 21) | | |
668 | ((p[3] & 0x07) << 28) | | |
669 | (((u64)p[3] & 0x70) << 27) | | |
670 | (((u64)p[0] & 0x01) << 34); | |
671 | ||
672 | /* Y-profile is stored in P(0) to p(n-1), n = y_bits; */ | |
673 | f->y_map = palm_data & (BIT(priv->y_bits) - 1); | |
674 | ||
675 | /* X-profile is stored in p(n) to p(n+m-1), m = x_bits; */ | |
676 | f->x_map = (palm_data >> priv->y_bits) & | |
677 | (BIT(priv->x_bits) - 1); | |
678 | } | |
38c11eaa HG |
679 | |
680 | return 0; | |
75af9e56 DT |
681 | } |
682 | ||
ee65d4b3 | 683 | static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse) |
25bded7c SF |
684 | { |
685 | struct alps_data *priv = psmouse->private; | |
686 | unsigned char *packet = psmouse->packet; | |
25bded7c | 687 | struct input_dev *dev2 = priv->dev2; |
02d04254 HG |
688 | struct alps_fields *f = &priv->f; |
689 | int fingers = 0; | |
690 | ||
691 | memset(f, 0, sizeof(*f)); | |
f85e5001 | 692 | |
02d04254 | 693 | priv->decode_fields(f, packet, psmouse); |
25bded7c SF |
694 | |
695 | /* | |
01ce661f SF |
696 | * There's no single feature of touchpad position and bitmap packets |
697 | * that can be used to distinguish between them. We rely on the fact | |
698 | * that a bitmap packet should always follow a position packet with | |
699 | * bit 6 of packet[4] set. | |
25bded7c SF |
700 | */ |
701 | if (priv->multi_packet) { | |
25bded7c SF |
702 | /* |
703 | * Sometimes a position packet will indicate a multi-packet | |
704 | * sequence, but then what follows is another position | |
705 | * packet. Check for this, and when it happens process the | |
706 | * position packet as usual. | |
707 | */ | |
02d04254 HG |
708 | if (f->is_mp) { |
709 | fingers = f->fingers; | |
44b77f38 HG |
710 | /* |
711 | * Bitmap processing uses position packet's coordinate | |
712 | * data, so we need to do decode it first. | |
713 | */ | |
714 | priv->decode_fields(f, priv->multi_data, psmouse); | |
dccf1dd8 HG |
715 | if (alps_process_bitmap(priv, f) == 0) |
716 | fingers = 0; /* Use st data */ | |
01ce661f SF |
717 | } else { |
718 | priv->multi_packet = 0; | |
25bded7c SF |
719 | } |
720 | } | |
721 | ||
01ce661f SF |
722 | /* |
723 | * Bit 6 of byte 0 is not usually set in position packets. The only | |
724 | * times it seems to be set is in situations where the data is | |
725 | * suspect anyway, e.g. a palm resting flat on the touchpad. Given | |
726 | * this combined with the fact that this bit is useful for filtering | |
727 | * out misidentified bitmap packets, we reject anything with this | |
728 | * bit set. | |
729 | */ | |
02d04254 | 730 | if (f->is_mp) |
01ce661f SF |
731 | return; |
732 | ||
02d04254 | 733 | if (!priv->multi_packet && f->first_mp) { |
25bded7c | 734 | priv->multi_packet = 1; |
01ce661f SF |
735 | memcpy(priv->multi_data, packet, sizeof(priv->multi_data)); |
736 | return; | |
737 | } | |
738 | ||
739 | priv->multi_packet = 0; | |
25bded7c | 740 | |
25bded7c SF |
741 | /* |
742 | * Sometimes the hardware sends a single packet with z = 0 | |
743 | * in the middle of a stream. Real releases generate packets | |
744 | * with x, y, and z all zero, so these seem to be flukes. | |
745 | * Ignore them. | |
746 | */ | |
02d04254 | 747 | if (f->st.x && f->st.y && !f->pressure) |
25bded7c SF |
748 | return; |
749 | ||
68c21870 | 750 | alps_report_semi_mt_data(psmouse, fingers); |
25bded7c | 751 | |
34412ba2 PR |
752 | if ((priv->flags & ALPS_DUALPOINT) && |
753 | !(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS)) { | |
02d04254 HG |
754 | input_report_key(dev2, BTN_LEFT, f->ts_left); |
755 | input_report_key(dev2, BTN_RIGHT, f->ts_right); | |
756 | input_report_key(dev2, BTN_MIDDLE, f->ts_middle); | |
25bded7c SF |
757 | input_sync(dev2); |
758 | } | |
759 | } | |
760 | ||
761 | static void alps_process_packet_v3(struct psmouse *psmouse) | |
762 | { | |
763 | unsigned char *packet = psmouse->packet; | |
764 | ||
765 | /* | |
766 | * v3 protocol packets come in three types, two representing | |
767 | * touchpad data and one representing trackstick data. | |
768 | * Trackstick packets seem to be distinguished by always | |
769 | * having 0x3f in the last byte. This value has never been | |
770 | * observed in the last byte of either of the other types | |
771 | * of packets. | |
772 | */ | |
773 | if (packet[5] == 0x3f) { | |
774 | alps_process_trackstick_packet_v3(psmouse); | |
775 | return; | |
776 | } | |
777 | ||
ee65d4b3 | 778 | alps_process_touchpad_packet_v3_v5(psmouse); |
25bded7c SF |
779 | } |
780 | ||
95f75e91 YT |
781 | static void alps_process_packet_v6(struct psmouse *psmouse) |
782 | { | |
783 | struct alps_data *priv = psmouse->private; | |
784 | unsigned char *packet = psmouse->packet; | |
785 | struct input_dev *dev = psmouse->dev; | |
786 | struct input_dev *dev2 = priv->dev2; | |
787 | int x, y, z, left, right, middle; | |
788 | ||
789 | /* | |
790 | * We can use Byte5 to distinguish if the packet is from Touchpad | |
791 | * or Trackpoint. | |
792 | * Touchpad: 0 - 0x7E | |
793 | * Trackpoint: 0x7F | |
794 | */ | |
795 | if (packet[5] == 0x7F) { | |
796 | /* It should be a DualPoint when received Trackpoint packet */ | |
34412ba2 PR |
797 | if (!(priv->flags & ALPS_DUALPOINT)) { |
798 | psmouse_warn(psmouse, | |
799 | "Rejected trackstick packet from non DualPoint device"); | |
95f75e91 | 800 | return; |
34412ba2 | 801 | } |
95f75e91 YT |
802 | |
803 | /* Trackpoint packet */ | |
804 | x = packet[1] | ((packet[3] & 0x20) << 2); | |
805 | y = packet[2] | ((packet[3] & 0x40) << 1); | |
806 | z = packet[4]; | |
807 | left = packet[3] & 0x01; | |
808 | right = packet[3] & 0x02; | |
809 | middle = packet[3] & 0x04; | |
810 | ||
811 | /* To prevent the cursor jump when finger lifted */ | |
812 | if (x == 0x7F && y == 0x7F && z == 0x7F) | |
813 | x = y = z = 0; | |
814 | ||
815 | /* Divide 4 since trackpoint's speed is too fast */ | |
816 | input_report_rel(dev2, REL_X, (char)x / 4); | |
817 | input_report_rel(dev2, REL_Y, -((char)y / 4)); | |
818 | ||
819 | input_report_key(dev2, BTN_LEFT, left); | |
820 | input_report_key(dev2, BTN_RIGHT, right); | |
821 | input_report_key(dev2, BTN_MIDDLE, middle); | |
822 | ||
823 | input_sync(dev2); | |
824 | return; | |
825 | } | |
826 | ||
827 | /* Touchpad packet */ | |
828 | x = packet[1] | ((packet[3] & 0x78) << 4); | |
829 | y = packet[2] | ((packet[4] & 0x78) << 4); | |
830 | z = packet[5]; | |
831 | left = packet[3] & 0x01; | |
832 | right = packet[3] & 0x02; | |
833 | ||
834 | if (z > 30) | |
835 | input_report_key(dev, BTN_TOUCH, 1); | |
836 | if (z < 25) | |
837 | input_report_key(dev, BTN_TOUCH, 0); | |
838 | ||
839 | if (z > 0) { | |
840 | input_report_abs(dev, ABS_X, x); | |
841 | input_report_abs(dev, ABS_Y, y); | |
842 | } | |
843 | ||
844 | input_report_abs(dev, ABS_PRESSURE, z); | |
845 | input_report_key(dev, BTN_TOOL_FINGER, z > 0); | |
846 | ||
847 | /* v6 touchpad does not have middle button */ | |
848 | input_report_key(dev, BTN_LEFT, left); | |
849 | input_report_key(dev, BTN_RIGHT, right); | |
850 | ||
851 | input_sync(dev); | |
852 | } | |
853 | ||
25bded7c SF |
854 | static void alps_process_packet_v4(struct psmouse *psmouse) |
855 | { | |
3b7e09fa | 856 | struct alps_data *priv = psmouse->private; |
25bded7c | 857 | unsigned char *packet = psmouse->packet; |
02d04254 | 858 | struct alps_fields *f = &priv->f; |
68c21870 | 859 | int offset; |
3b7e09fa GP |
860 | |
861 | /* | |
862 | * v4 has a 6-byte encoding for bitmap data, but this data is | |
863 | * broken up between 3 normal packets. Use priv->multi_packet to | |
864 | * track our position in the bitmap packet. | |
865 | */ | |
866 | if (packet[6] & 0x40) { | |
867 | /* sync, reset position */ | |
868 | priv->multi_packet = 0; | |
869 | } | |
870 | ||
871 | if (WARN_ON_ONCE(priv->multi_packet > 2)) | |
872 | return; | |
873 | ||
874 | offset = 2 * priv->multi_packet; | |
875 | priv->multi_data[offset] = packet[6]; | |
876 | priv->multi_data[offset + 1] = packet[7]; | |
877 | ||
44b77f38 HG |
878 | f->left = !!(packet[4] & 0x01); |
879 | f->right = !!(packet[4] & 0x02); | |
880 | ||
881 | f->st.x = ((packet[1] & 0x7f) << 4) | ((packet[3] & 0x30) >> 2) | | |
882 | ((packet[0] & 0x30) >> 4); | |
883 | f->st.y = ((packet[2] & 0x7f) << 4) | (packet[3] & 0x0f); | |
884 | f->pressure = packet[5] & 0x7f; | |
885 | ||
3b7e09fa GP |
886 | if (++priv->multi_packet > 2) { |
887 | priv->multi_packet = 0; | |
888 | ||
02d04254 | 889 | f->x_map = ((priv->multi_data[2] & 0x1f) << 10) | |
3b7e09fa GP |
890 | ((priv->multi_data[3] & 0x60) << 3) | |
891 | ((priv->multi_data[0] & 0x3f) << 2) | | |
892 | ((priv->multi_data[1] & 0x60) >> 5); | |
02d04254 | 893 | f->y_map = ((priv->multi_data[5] & 0x01) << 10) | |
3b7e09fa GP |
894 | ((priv->multi_data[3] & 0x1f) << 5) | |
895 | (priv->multi_data[1] & 0x1f); | |
896 | ||
02d04254 | 897 | f->fingers = alps_process_bitmap(priv, f); |
3b7e09fa | 898 | } |
25bded7c | 899 | |
68c21870 | 900 | alps_report_semi_mt_data(psmouse, f->fingers); |
25bded7c SF |
901 | } |
902 | ||
3808843c YT |
903 | static bool alps_is_valid_package_v7(struct psmouse *psmouse) |
904 | { | |
905 | switch (psmouse->pktcnt) { | |
906 | case 3: | |
907 | return (psmouse->packet[2] & 0x40) == 0x40; | |
908 | case 4: | |
909 | return (psmouse->packet[3] & 0x48) == 0x48; | |
910 | case 6: | |
911 | return (psmouse->packet[5] & 0x40) == 0x00; | |
912 | } | |
913 | return true; | |
914 | } | |
915 | ||
916 | static unsigned char alps_get_packet_id_v7(char *byte) | |
917 | { | |
918 | unsigned char packet_id; | |
919 | ||
920 | if (byte[4] & 0x40) | |
921 | packet_id = V7_PACKET_ID_TWO; | |
922 | else if (byte[4] & 0x01) | |
923 | packet_id = V7_PACKET_ID_MULTI; | |
924 | else if ((byte[0] & 0x10) && !(byte[4] & 0x43)) | |
925 | packet_id = V7_PACKET_ID_NEW; | |
926 | else if (byte[1] == 0x00 && byte[4] == 0x00) | |
927 | packet_id = V7_PACKET_ID_IDLE; | |
928 | else | |
929 | packet_id = V7_PACKET_ID_UNKNOWN; | |
930 | ||
931 | return packet_id; | |
932 | } | |
933 | ||
934 | static void alps_get_finger_coordinate_v7(struct input_mt_pos *mt, | |
935 | unsigned char *pkt, | |
936 | unsigned char pkt_id) | |
937 | { | |
938 | mt[0].x = ((pkt[2] & 0x80) << 4); | |
939 | mt[0].x |= ((pkt[2] & 0x3F) << 5); | |
940 | mt[0].x |= ((pkt[3] & 0x30) >> 1); | |
941 | mt[0].x |= (pkt[3] & 0x07); | |
942 | mt[0].y = (pkt[1] << 3) | (pkt[0] & 0x07); | |
943 | ||
944 | mt[1].x = ((pkt[3] & 0x80) << 4); | |
945 | mt[1].x |= ((pkt[4] & 0x80) << 3); | |
946 | mt[1].x |= ((pkt[4] & 0x3F) << 4); | |
947 | mt[1].y = ((pkt[5] & 0x80) << 3); | |
948 | mt[1].y |= ((pkt[5] & 0x3F) << 4); | |
949 | ||
950 | switch (pkt_id) { | |
951 | case V7_PACKET_ID_TWO: | |
952 | mt[1].x &= ~0x000F; | |
953 | mt[1].y |= 0x000F; | |
72eceab7 HG |
954 | /* Detect false-postive touches where x & y report max value */ |
955 | if (mt[1].y == 0x7ff && mt[1].x == 0xff0) { | |
956 | mt[1].x = 0; | |
957 | /* y gets set to 0 at the end of this function */ | |
958 | } | |
3808843c YT |
959 | break; |
960 | ||
961 | case V7_PACKET_ID_MULTI: | |
962 | mt[1].x &= ~0x003F; | |
963 | mt[1].y &= ~0x0020; | |
964 | mt[1].y |= ((pkt[4] & 0x02) << 4); | |
965 | mt[1].y |= 0x001F; | |
966 | break; | |
967 | ||
968 | case V7_PACKET_ID_NEW: | |
969 | mt[1].x &= ~0x003F; | |
970 | mt[1].x |= (pkt[0] & 0x20); | |
971 | mt[1].y |= 0x000F; | |
972 | break; | |
973 | } | |
974 | ||
975 | mt[0].y = 0x7FF - mt[0].y; | |
976 | mt[1].y = 0x7FF - mt[1].y; | |
977 | } | |
978 | ||
979 | static int alps_get_mt_count(struct input_mt_pos *mt) | |
980 | { | |
7091c443 | 981 | int i, fingers = 0; |
3808843c | 982 | |
7091c443 HG |
983 | for (i = 0; i < MAX_TOUCHES; i++) { |
984 | if (mt[i].x != 0 || mt[i].y != 0) | |
985 | fingers++; | |
986 | } | |
3808843c | 987 | |
7091c443 | 988 | return fingers; |
3808843c YT |
989 | } |
990 | ||
991 | static int alps_decode_packet_v7(struct alps_fields *f, | |
992 | unsigned char *p, | |
993 | struct psmouse *psmouse) | |
994 | { | |
d27eb793 | 995 | struct alps_data *priv = psmouse->private; |
3808843c YT |
996 | unsigned char pkt_id; |
997 | ||
998 | pkt_id = alps_get_packet_id_v7(p); | |
999 | if (pkt_id == V7_PACKET_ID_IDLE) | |
1000 | return 0; | |
1001 | if (pkt_id == V7_PACKET_ID_UNKNOWN) | |
1002 | return -1; | |
8b238115 HG |
1003 | /* |
1004 | * NEW packets are send to indicate a discontinuity in the finger | |
1005 | * coordinate reporting. Specifically a finger may have moved from | |
1006 | * slot 0 to 1 or vice versa. INPUT_MT_TRACK takes care of this for | |
1007 | * us. | |
1008 | * | |
1009 | * NEW packets have 3 problems: | |
1010 | * 1) They do not contain middle / right button info (on non clickpads) | |
1011 | * this can be worked around by preserving the old button state | |
1012 | * 2) They do not contain an accurate fingercount, and they are | |
1013 | * typically send when the number of fingers changes. We cannot use | |
1014 | * the old finger count as that may mismatch with the amount of | |
1015 | * touch coordinates we've available in the NEW packet | |
1016 | * 3) Their x data for the second touch is inaccurate leading to | |
1017 | * a possible jump of the x coordinate by 16 units when the first | |
1018 | * non NEW packet comes in | |
1019 | * Since problems 2 & 3 cannot be worked around, just ignore them. | |
1020 | */ | |
1021 | if (pkt_id == V7_PACKET_ID_NEW) | |
1022 | return 1; | |
3808843c YT |
1023 | |
1024 | alps_get_finger_coordinate_v7(f->mt, p, pkt_id); | |
1025 | ||
3808843c YT |
1026 | if (pkt_id == V7_PACKET_ID_TWO) |
1027 | f->fingers = alps_get_mt_count(f->mt); | |
8b238115 | 1028 | else /* pkt_id == V7_PACKET_ID_MULTI */ |
3808843c YT |
1029 | f->fingers = 3 + (p[5] & 0x03); |
1030 | ||
d27eb793 HG |
1031 | f->left = (p[0] & 0x80) >> 7; |
1032 | if (priv->flags & ALPS_BUTTONPAD) { | |
1033 | if (p[0] & 0x20) | |
1034 | f->fingers++; | |
1035 | if (p[0] & 0x10) | |
1036 | f->fingers++; | |
1037 | } else { | |
1038 | f->right = (p[0] & 0x20) >> 5; | |
1039 | f->middle = (p[0] & 0x10) >> 4; | |
1040 | } | |
1041 | ||
7091c443 HG |
1042 | /* Sometimes a single touch is reported in mt[1] rather then mt[0] */ |
1043 | if (f->fingers == 1 && f->mt[0].x == 0 && f->mt[0].y == 0) { | |
1044 | f->mt[0].x = f->mt[1].x; | |
1045 | f->mt[0].y = f->mt[1].y; | |
1046 | f->mt[1].x = 0; | |
1047 | f->mt[1].y = 0; | |
1048 | } | |
1049 | ||
3808843c YT |
1050 | return 0; |
1051 | } | |
1052 | ||
1053 | static void alps_process_trackstick_packet_v7(struct psmouse *psmouse) | |
1054 | { | |
1055 | struct alps_data *priv = psmouse->private; | |
1056 | unsigned char *packet = psmouse->packet; | |
1057 | struct input_dev *dev2 = priv->dev2; | |
1058 | int x, y, z, left, right, middle; | |
1059 | ||
34412ba2 PR |
1060 | /* It should be a DualPoint when received trackstick packet */ |
1061 | if (!(priv->flags & ALPS_DUALPOINT)) { | |
1062 | psmouse_warn(psmouse, | |
1063 | "Rejected trackstick packet from non DualPoint device"); | |
1064 | return; | |
1065 | } | |
1066 | ||
3808843c YT |
1067 | x = ((packet[2] & 0xbf)) | ((packet[3] & 0x10) << 2); |
1068 | y = (packet[3] & 0x07) | (packet[4] & 0xb8) | | |
1069 | ((packet[3] & 0x20) << 1); | |
1070 | z = (packet[5] & 0x3f) | ((packet[3] & 0x80) >> 1); | |
1071 | ||
1072 | left = (packet[1] & 0x01); | |
1073 | right = (packet[1] & 0x02) >> 1; | |
1074 | middle = (packet[1] & 0x04) >> 2; | |
1075 | ||
088df2cc HG |
1076 | input_report_rel(dev2, REL_X, (char)x); |
1077 | input_report_rel(dev2, REL_Y, -((char)y)); | |
3808843c YT |
1078 | |
1079 | input_report_key(dev2, BTN_LEFT, left); | |
1080 | input_report_key(dev2, BTN_RIGHT, right); | |
1081 | input_report_key(dev2, BTN_MIDDLE, middle); | |
1082 | ||
1083 | input_sync(dev2); | |
1084 | } | |
1085 | ||
1086 | static void alps_process_touchpad_packet_v7(struct psmouse *psmouse) | |
1087 | { | |
1088 | struct alps_data *priv = psmouse->private; | |
1089 | struct input_dev *dev = psmouse->dev; | |
1090 | struct alps_fields *f = &priv->f; | |
1091 | ||
1092 | memset(f, 0, sizeof(*f)); | |
1093 | ||
1094 | if (priv->decode_fields(f, psmouse->packet, psmouse)) | |
1095 | return; | |
1096 | ||
1097 | alps_report_mt_data(psmouse, alps_get_mt_count(f->mt)); | |
1098 | ||
1099 | input_mt_report_finger_count(dev, f->fingers); | |
1100 | ||
1101 | input_report_key(dev, BTN_LEFT, f->left); | |
1102 | input_report_key(dev, BTN_RIGHT, f->right); | |
1103 | input_report_key(dev, BTN_MIDDLE, f->middle); | |
1104 | ||
1105 | input_sync(dev); | |
1106 | } | |
1107 | ||
1108 | static void alps_process_packet_v7(struct psmouse *psmouse) | |
1109 | { | |
1110 | unsigned char *packet = psmouse->packet; | |
1111 | ||
1112 | if (packet[0] == 0x48 && (packet[4] & 0x47) == 0x06) | |
1113 | alps_process_trackstick_packet_v7(psmouse); | |
1114 | else | |
1115 | alps_process_touchpad_packet_v7(psmouse); | |
1116 | } | |
1117 | ||
07f19e3d | 1118 | static unsigned char alps_get_pkt_id_ss4_v2(unsigned char *byte) |
3db5b9f7 MO |
1119 | { |
1120 | unsigned char pkt_id = SS4_PACKET_ID_IDLE; | |
1121 | ||
1122 | if (byte[0] == 0x18 && byte[1] == 0x10 && byte[2] == 0x00 && | |
1123 | (byte[3] & 0x88) == 0x08 && byte[4] == 0x10 && byte[5] == 0x00) { | |
1124 | pkt_id = SS4_PACKET_ID_IDLE; | |
1125 | } else if (!(byte[3] & 0x10)) { | |
1126 | pkt_id = SS4_PACKET_ID_ONE; | |
1127 | } else if (!(byte[3] & 0x20)) { | |
1128 | pkt_id = SS4_PACKET_ID_TWO; | |
1129 | } else { | |
1130 | pkt_id = SS4_PACKET_ID_MULTI; | |
1131 | } | |
1132 | ||
1133 | return pkt_id; | |
1134 | } | |
1135 | ||
1136 | static int alps_decode_ss4_v2(struct alps_fields *f, | |
1137 | unsigned char *p, struct psmouse *psmouse) | |
1138 | { | |
1139 | struct alps_data *priv = psmouse->private; | |
1140 | unsigned char pkt_id; | |
1141 | unsigned int no_data_x, no_data_y; | |
1142 | ||
1143 | pkt_id = alps_get_pkt_id_ss4_v2(p); | |
1144 | ||
1145 | /* Current packet is 1Finger coordinate packet */ | |
1146 | switch (pkt_id) { | |
1147 | case SS4_PACKET_ID_ONE: | |
1148 | f->mt[0].x = SS4_1F_X_V2(p); | |
1149 | f->mt[0].y = SS4_1F_Y_V2(p); | |
1150 | f->pressure = ((SS4_1F_Z_V2(p)) * 2) & 0x7f; | |
1151 | f->fingers = 1; | |
1152 | f->first_mp = 0; | |
1153 | f->is_mp = 0; | |
1154 | break; | |
1155 | ||
1156 | case SS4_PACKET_ID_TWO: | |
1157 | if (priv->flags & ALPS_BUTTONPAD) { | |
1158 | f->mt[0].x = SS4_BTL_MF_X_V2(p, 0); | |
1159 | f->mt[0].y = SS4_BTL_MF_Y_V2(p, 0); | |
1160 | f->mt[1].x = SS4_BTL_MF_X_V2(p, 1); | |
1161 | f->mt[1].y = SS4_BTL_MF_Y_V2(p, 1); | |
1162 | } else { | |
1163 | f->mt[0].x = SS4_STD_MF_X_V2(p, 0); | |
1164 | f->mt[0].y = SS4_STD_MF_Y_V2(p, 0); | |
1165 | f->mt[1].x = SS4_STD_MF_X_V2(p, 1); | |
1166 | f->mt[1].y = SS4_STD_MF_Y_V2(p, 1); | |
1167 | } | |
1168 | f->pressure = SS4_MF_Z_V2(p, 0) ? 0x30 : 0; | |
1169 | ||
1170 | if (SS4_IS_MF_CONTINUE(p)) { | |
1171 | f->first_mp = 1; | |
1172 | } else { | |
1173 | f->fingers = 2; | |
1174 | f->first_mp = 0; | |
1175 | } | |
1176 | f->is_mp = 0; | |
1177 | ||
1178 | break; | |
1179 | ||
1180 | case SS4_PACKET_ID_MULTI: | |
1181 | if (priv->flags & ALPS_BUTTONPAD) { | |
1182 | f->mt[2].x = SS4_BTL_MF_X_V2(p, 0); | |
1183 | f->mt[2].y = SS4_BTL_MF_Y_V2(p, 0); | |
1184 | f->mt[3].x = SS4_BTL_MF_X_V2(p, 1); | |
1185 | f->mt[3].y = SS4_BTL_MF_Y_V2(p, 1); | |
1186 | no_data_x = SS4_MFPACKET_NO_AX_BL; | |
1187 | no_data_y = SS4_MFPACKET_NO_AY_BL; | |
1188 | } else { | |
1189 | f->mt[2].x = SS4_STD_MF_X_V2(p, 0); | |
1190 | f->mt[2].y = SS4_STD_MF_Y_V2(p, 0); | |
1191 | f->mt[3].x = SS4_STD_MF_X_V2(p, 1); | |
1192 | f->mt[3].y = SS4_STD_MF_Y_V2(p, 1); | |
1193 | no_data_x = SS4_MFPACKET_NO_AX; | |
1194 | no_data_y = SS4_MFPACKET_NO_AY; | |
1195 | } | |
1196 | ||
1197 | f->first_mp = 0; | |
1198 | f->is_mp = 1; | |
1199 | ||
1200 | if (SS4_IS_5F_DETECTED(p)) { | |
1201 | f->fingers = 5; | |
1202 | } else if (f->mt[3].x == no_data_x && | |
1203 | f->mt[3].y == no_data_y) { | |
1204 | f->mt[3].x = 0; | |
1205 | f->mt[3].y = 0; | |
1206 | f->fingers = 3; | |
1207 | } else { | |
1208 | f->fingers = 4; | |
1209 | } | |
1210 | break; | |
1211 | ||
1212 | case SS4_PACKET_ID_IDLE: | |
1213 | default: | |
1214 | memset(f, 0, sizeof(struct alps_fields)); | |
1215 | break; | |
1216 | } | |
1217 | ||
1218 | f->left = !!(SS4_BTN_V2(p) & 0x01); | |
1219 | if (!(priv->flags & ALPS_BUTTONPAD)) { | |
1220 | f->right = !!(SS4_BTN_V2(p) & 0x02); | |
1221 | f->middle = !!(SS4_BTN_V2(p) & 0x04); | |
1222 | } | |
1223 | ||
1224 | return 0; | |
1225 | } | |
1226 | ||
1227 | static void alps_process_packet_ss4_v2(struct psmouse *psmouse) | |
1228 | { | |
1229 | struct alps_data *priv = psmouse->private; | |
1230 | unsigned char *packet = psmouse->packet; | |
1231 | struct input_dev *dev = psmouse->dev; | |
1232 | struct alps_fields *f = &priv->f; | |
1233 | ||
1234 | memset(f, 0, sizeof(struct alps_fields)); | |
1235 | priv->decode_fields(f, packet, psmouse); | |
1236 | if (priv->multi_packet) { | |
1237 | /* | |
1238 | * Sometimes the first packet will indicate a multi-packet | |
1239 | * sequence, but sometimes the next multi-packet would not | |
1240 | * come. Check for this, and when it happens process the | |
1241 | * position packet as usual. | |
1242 | */ | |
1243 | if (f->is_mp) { | |
1244 | /* Now process the 1st packet */ | |
1245 | priv->decode_fields(f, priv->multi_data, psmouse); | |
1246 | } else { | |
1247 | priv->multi_packet = 0; | |
1248 | } | |
1249 | } | |
1250 | ||
1251 | /* | |
1252 | * "f.is_mp" would always be '0' after merging the 1st and 2nd packet. | |
1253 | * When it is set, it means 2nd packet comes without 1st packet come. | |
1254 | */ | |
1255 | if (f->is_mp) | |
1256 | return; | |
1257 | ||
1258 | /* Save the first packet */ | |
1259 | if (!priv->multi_packet && f->first_mp) { | |
1260 | priv->multi_packet = 1; | |
1261 | memcpy(priv->multi_data, packet, sizeof(priv->multi_data)); | |
1262 | return; | |
1263 | } | |
1264 | ||
1265 | priv->multi_packet = 0; | |
1266 | ||
1267 | alps_report_mt_data(psmouse, (f->fingers <= 4) ? f->fingers : 4); | |
1268 | ||
1269 | input_mt_report_finger_count(dev, f->fingers); | |
1270 | ||
1271 | input_report_key(dev, BTN_LEFT, f->left); | |
1272 | input_report_key(dev, BTN_RIGHT, f->right); | |
1273 | input_report_key(dev, BTN_MIDDLE, f->middle); | |
1274 | ||
1275 | input_report_abs(dev, ABS_PRESSURE, f->pressure); | |
1276 | input_sync(dev); | |
1277 | } | |
1278 | ||
1279 | static bool alps_is_valid_package_ss4_v2(struct psmouse *psmouse) | |
1280 | { | |
1281 | if (psmouse->pktcnt == 4 && ((psmouse->packet[3] & 0x08) != 0x08)) | |
1282 | return false; | |
1283 | if (psmouse->pktcnt == 6 && ((psmouse->packet[5] & 0x10) != 0x0)) | |
1284 | return false; | |
1285 | return true; | |
1286 | } | |
1287 | ||
04aae283 PR |
1288 | static DEFINE_MUTEX(alps_mutex); |
1289 | ||
1290 | static void alps_register_bare_ps2_mouse(struct work_struct *work) | |
1291 | { | |
1292 | struct alps_data *priv = | |
1293 | container_of(work, struct alps_data, dev3_register_work.work); | |
1294 | struct psmouse *psmouse = priv->psmouse; | |
1295 | struct input_dev *dev3; | |
1296 | int error = 0; | |
1297 | ||
1298 | mutex_lock(&alps_mutex); | |
1299 | ||
1300 | if (priv->dev3) | |
1301 | goto out; | |
1302 | ||
1303 | dev3 = input_allocate_device(); | |
1304 | if (!dev3) { | |
1305 | psmouse_err(psmouse, "failed to allocate secondary device\n"); | |
1306 | error = -ENOMEM; | |
1307 | goto out; | |
1308 | } | |
1309 | ||
1310 | snprintf(priv->phys3, sizeof(priv->phys3), "%s/%s", | |
1311 | psmouse->ps2dev.serio->phys, | |
1312 | (priv->dev2 ? "input2" : "input1")); | |
1313 | dev3->phys = priv->phys3; | |
1314 | ||
1315 | /* | |
1316 | * format of input device name is: "protocol vendor name" | |
1317 | * see function psmouse_switch_protocol() in psmouse-base.c | |
1318 | */ | |
1319 | dev3->name = "PS/2 ALPS Mouse"; | |
1320 | ||
1321 | dev3->id.bustype = BUS_I8042; | |
1322 | dev3->id.vendor = 0x0002; | |
1323 | dev3->id.product = PSMOUSE_PS2; | |
1324 | dev3->id.version = 0x0000; | |
1325 | dev3->dev.parent = &psmouse->ps2dev.serio->dev; | |
1326 | ||
1327 | input_set_capability(dev3, EV_REL, REL_X); | |
1328 | input_set_capability(dev3, EV_REL, REL_Y); | |
1329 | input_set_capability(dev3, EV_KEY, BTN_LEFT); | |
1330 | input_set_capability(dev3, EV_KEY, BTN_RIGHT); | |
1331 | input_set_capability(dev3, EV_KEY, BTN_MIDDLE); | |
1332 | ||
1333 | __set_bit(INPUT_PROP_POINTER, dev3->propbit); | |
1334 | ||
1335 | error = input_register_device(dev3); | |
1336 | if (error) { | |
1337 | psmouse_err(psmouse, | |
1338 | "failed to register secondary device: %d\n", | |
1339 | error); | |
1340 | input_free_device(dev3); | |
1341 | goto out; | |
1342 | } | |
1343 | ||
1344 | priv->dev3 = dev3; | |
1345 | ||
1346 | out: | |
1347 | /* | |
1348 | * Save the error code so that we can detect that we | |
1349 | * already tried to create the device. | |
1350 | */ | |
1351 | if (error) | |
1352 | priv->dev3 = ERR_PTR(error); | |
1353 | ||
1354 | mutex_unlock(&alps_mutex); | |
1355 | } | |
1356 | ||
59c30afb | 1357 | static void alps_report_bare_ps2_packet(struct psmouse *psmouse, |
1d9f2626 SK |
1358 | unsigned char packet[], |
1359 | bool report_buttons) | |
1360 | { | |
59c30afb | 1361 | struct alps_data *priv = psmouse->private; |
6bcca19f | 1362 | struct input_dev *dev, *dev2 = NULL; |
59c30afb | 1363 | |
e3a79212 HG |
1364 | /* Figure out which device to use to report the bare packet */ |
1365 | if (priv->proto_version == ALPS_PROTO_V2 && | |
1366 | (priv->flags & ALPS_DUALPOINT)) { | |
1367 | /* On V2 devices the DualPoint Stick reports bare packets */ | |
1368 | dev = priv->dev2; | |
6bcca19f | 1369 | dev2 = psmouse->dev; |
e3a79212 | 1370 | } else if (unlikely(IS_ERR_OR_NULL(priv->dev3))) { |
59c30afb HG |
1371 | /* Register dev3 mouse if we received PS/2 packet first time */ |
1372 | if (!IS_ERR(priv->dev3)) | |
1373 | psmouse_queue_work(psmouse, &priv->dev3_register_work, | |
1374 | 0); | |
1375 | return; | |
1376 | } else { | |
1377 | dev = priv->dev3; | |
1378 | } | |
1379 | ||
1d9f2626 | 1380 | if (report_buttons) |
6bcca19f | 1381 | alps_report_buttons(dev, dev2, |
1d9f2626 SK |
1382 | packet[0] & 1, packet[0] & 2, packet[0] & 4); |
1383 | ||
04aae283 | 1384 | input_report_rel(dev, REL_X, |
1d9f2626 | 1385 | packet[1] ? packet[1] - ((packet[0] << 4) & 0x100) : 0); |
04aae283 | 1386 | input_report_rel(dev, REL_Y, |
1d9f2626 SK |
1387 | packet[2] ? ((packet[0] << 3) & 0x100) - packet[2] : 0); |
1388 | ||
04aae283 | 1389 | input_sync(dev); |
1d9f2626 SK |
1390 | } |
1391 | ||
1392 | static psmouse_ret_t alps_handle_interleaved_ps2(struct psmouse *psmouse) | |
1393 | { | |
1394 | struct alps_data *priv = psmouse->private; | |
1395 | ||
1396 | if (psmouse->pktcnt < 6) | |
1397 | return PSMOUSE_GOOD_DATA; | |
1398 | ||
1399 | if (psmouse->pktcnt == 6) { | |
1400 | /* | |
1401 | * Start a timer to flush the packet if it ends up last | |
1402 | * 6-byte packet in the stream. Timer needs to fire | |
1403 | * psmouse core times out itself. 20 ms should be enough | |
1404 | * to decide if we are getting more data or not. | |
1405 | */ | |
1406 | mod_timer(&priv->timer, jiffies + msecs_to_jiffies(20)); | |
1407 | return PSMOUSE_GOOD_DATA; | |
1408 | } | |
1409 | ||
1410 | del_timer(&priv->timer); | |
1411 | ||
1412 | if (psmouse->packet[6] & 0x80) { | |
1413 | ||
1414 | /* | |
1415 | * Highest bit is set - that means we either had | |
1416 | * complete ALPS packet and this is start of the | |
1417 | * next packet or we got garbage. | |
1418 | */ | |
1419 | ||
1420 | if (((psmouse->packet[3] | | |
1421 | psmouse->packet[4] | | |
1422 | psmouse->packet[5]) & 0x80) || | |
99df65e7 | 1423 | (!alps_is_valid_first_byte(priv, psmouse->packet[6]))) { |
b5d21704 | 1424 | psmouse_dbg(psmouse, |
3b112923 AS |
1425 | "refusing packet %4ph (suspected interleaved ps/2)\n", |
1426 | psmouse->packet + 3); | |
1d9f2626 SK |
1427 | return PSMOUSE_BAD_DATA; |
1428 | } | |
1429 | ||
24af5cb9 | 1430 | priv->process_packet(psmouse); |
1d9f2626 SK |
1431 | |
1432 | /* Continue with the next packet */ | |
1433 | psmouse->packet[0] = psmouse->packet[6]; | |
1434 | psmouse->pktcnt = 1; | |
1435 | ||
1436 | } else { | |
1437 | ||
1438 | /* | |
1439 | * High bit is 0 - that means that we indeed got a PS/2 | |
1440 | * packet in the middle of ALPS packet. | |
1441 | * | |
1442 | * There is also possibility that we got 6-byte ALPS | |
1443 | * packet followed by 3-byte packet from trackpoint. We | |
1444 | * can not distinguish between these 2 scenarios but | |
b5d21704 | 1445 | * because the latter is unlikely to happen in course of |
1d9f2626 SK |
1446 | * normal operation (user would need to press all |
1447 | * buttons on the pad and start moving trackpoint | |
1448 | * without touching the pad surface) we assume former. | |
1449 | * Even if we are wrong the wost thing that would happen | |
1450 | * the cursor would jump but we should not get protocol | |
b5d21704 | 1451 | * de-synchronization. |
1d9f2626 SK |
1452 | */ |
1453 | ||
59c30afb HG |
1454 | alps_report_bare_ps2_packet(psmouse, &psmouse->packet[3], |
1455 | false); | |
1d9f2626 SK |
1456 | |
1457 | /* | |
1458 | * Continue with the standard ALPS protocol handling, | |
1459 | * but make sure we won't process it as an interleaved | |
1460 | * packet again, which may happen if all buttons are | |
1461 | * pressed. To avoid this let's reset the 4th bit which | |
1462 | * is normally 1. | |
1463 | */ | |
1464 | psmouse->packet[3] = psmouse->packet[6] & 0xf7; | |
1465 | psmouse->pktcnt = 4; | |
1466 | } | |
1467 | ||
1468 | return PSMOUSE_GOOD_DATA; | |
1469 | } | |
1470 | ||
1471 | static void alps_flush_packet(unsigned long data) | |
1472 | { | |
1473 | struct psmouse *psmouse = (struct psmouse *)data; | |
24af5cb9 | 1474 | struct alps_data *priv = psmouse->private; |
1d9f2626 SK |
1475 | |
1476 | serio_pause_rx(psmouse->ps2dev.serio); | |
1477 | ||
b46615fe | 1478 | if (psmouse->pktcnt == psmouse->pktsize) { |
1d9f2626 SK |
1479 | |
1480 | /* | |
1481 | * We did not any more data in reasonable amount of time. | |
1482 | * Validate the last 3 bytes and process as a standard | |
1483 | * ALPS packet. | |
1484 | */ | |
1485 | if ((psmouse->packet[3] | | |
1486 | psmouse->packet[4] | | |
1487 | psmouse->packet[5]) & 0x80) { | |
b5d21704 | 1488 | psmouse_dbg(psmouse, |
3b112923 AS |
1489 | "refusing packet %3ph (suspected interleaved ps/2)\n", |
1490 | psmouse->packet + 3); | |
1d9f2626 | 1491 | } else { |
24af5cb9 | 1492 | priv->process_packet(psmouse); |
1d9f2626 SK |
1493 | } |
1494 | psmouse->pktcnt = 0; | |
1495 | } | |
1496 | ||
1497 | serio_continue_rx(psmouse->ps2dev.serio); | |
1498 | } | |
1499 | ||
7d12e780 | 1500 | static psmouse_ret_t alps_process_byte(struct psmouse *psmouse) |
1da177e4 LT |
1501 | { |
1502 | struct alps_data *priv = psmouse->private; | |
1503 | ||
4ab8f7f3 PR |
1504 | /* |
1505 | * Check if we are dealing with a bare PS/2 packet, presumably from | |
1506 | * a device connected to the external PS/2 port. Because bare PS/2 | |
1507 | * protocol does not have enough constant bits to self-synchronize | |
1508 | * properly we only do this if the device is fully synchronized. | |
3db5b9f7 | 1509 | * Can not distinguish V8's first byte from PS/2 packet's |
4ab8f7f3 | 1510 | */ |
3db5b9f7 MO |
1511 | if (priv->proto_version != ALPS_PROTO_V8 && |
1512 | !psmouse->out_of_sync_cnt && | |
1513 | (psmouse->packet[0] & 0xc8) == 0x08) { | |
1514 | ||
1da177e4 | 1515 | if (psmouse->pktcnt == 3) { |
59c30afb HG |
1516 | alps_report_bare_ps2_packet(psmouse, psmouse->packet, |
1517 | true); | |
1da177e4 LT |
1518 | return PSMOUSE_FULL_PACKET; |
1519 | } | |
1520 | return PSMOUSE_GOOD_DATA; | |
1521 | } | |
1522 | ||
1d9f2626 SK |
1523 | /* Check for PS/2 packet stuffed in the middle of ALPS packet. */ |
1524 | ||
99df65e7 | 1525 | if ((priv->flags & ALPS_PS2_INTERLEAVED) && |
1d9f2626 SK |
1526 | psmouse->pktcnt >= 4 && (psmouse->packet[3] & 0x0f) == 0x0f) { |
1527 | return alps_handle_interleaved_ps2(psmouse); | |
1528 | } | |
1529 | ||
99df65e7 | 1530 | if (!alps_is_valid_first_byte(priv, psmouse->packet[0])) { |
b5d21704 DT |
1531 | psmouse_dbg(psmouse, |
1532 | "refusing packet[0] = %x (mask0 = %x, byte0 = %x)\n", | |
99df65e7 | 1533 | psmouse->packet[0], priv->mask0, priv->byte0); |
1da177e4 | 1534 | return PSMOUSE_BAD_DATA; |
1d9f2626 | 1535 | } |
1da177e4 | 1536 | |
b46615fe | 1537 | /* Bytes 2 - pktsize should have 0 in the highest bit */ |
a7ef82ae | 1538 | if (priv->proto_version < ALPS_PROTO_V5 && |
75af9e56 | 1539 | psmouse->pktcnt >= 2 && psmouse->pktcnt <= psmouse->pktsize && |
1d9f2626 | 1540 | (psmouse->packet[psmouse->pktcnt - 1] & 0x80)) { |
b5d21704 DT |
1541 | psmouse_dbg(psmouse, "refusing packet[%i] = %x\n", |
1542 | psmouse->pktcnt - 1, | |
1543 | psmouse->packet[psmouse->pktcnt - 1]); | |
a7ef82ae | 1544 | |
fb2dd7a6 | 1545 | if (priv->proto_version == ALPS_PROTO_V3_RUSHMORE && |
a7ef82ae PR |
1546 | psmouse->pktcnt == psmouse->pktsize) { |
1547 | /* | |
1548 | * Some Dell boxes, such as Latitude E6440 or E7440 | |
1549 | * with closed lid, quite often smash last byte of | |
1550 | * otherwise valid packet with 0xff. Given that the | |
1551 | * next packet is very likely to be valid let's | |
1552 | * report PSMOUSE_FULL_PACKET but not process data, | |
1553 | * rather than reporting PSMOUSE_BAD_DATA and | |
1554 | * filling the logs. | |
1555 | */ | |
1556 | return PSMOUSE_FULL_PACKET; | |
1557 | } | |
1558 | ||
1da177e4 | 1559 | return PSMOUSE_BAD_DATA; |
1d9f2626 | 1560 | } |
1da177e4 | 1561 | |
3db5b9f7 MO |
1562 | if ((priv->proto_version == ALPS_PROTO_V7 && |
1563 | !alps_is_valid_package_v7(psmouse)) || | |
1564 | (priv->proto_version == ALPS_PROTO_V8 && | |
1565 | !alps_is_valid_package_ss4_v2(psmouse))) { | |
3808843c YT |
1566 | psmouse_dbg(psmouse, "refusing packet[%i] = %x\n", |
1567 | psmouse->pktcnt - 1, | |
1568 | psmouse->packet[psmouse->pktcnt - 1]); | |
1569 | return PSMOUSE_BAD_DATA; | |
1570 | } | |
1571 | ||
b46615fe | 1572 | if (psmouse->pktcnt == psmouse->pktsize) { |
24af5cb9 | 1573 | priv->process_packet(psmouse); |
1da177e4 LT |
1574 | return PSMOUSE_FULL_PACKET; |
1575 | } | |
1576 | ||
1577 | return PSMOUSE_GOOD_DATA; | |
1578 | } | |
1579 | ||
25bded7c SF |
1580 | static int alps_command_mode_send_nibble(struct psmouse *psmouse, int nibble) |
1581 | { | |
1582 | struct ps2dev *ps2dev = &psmouse->ps2dev; | |
1583 | struct alps_data *priv = psmouse->private; | |
1584 | int command; | |
1585 | unsigned char *param; | |
1586 | unsigned char dummy[4]; | |
1587 | ||
1588 | BUG_ON(nibble > 0xf); | |
1589 | ||
1590 | command = priv->nibble_commands[nibble].command; | |
1591 | param = (command & 0x0f00) ? | |
1592 | dummy : (unsigned char *)&priv->nibble_commands[nibble].data; | |
1593 | ||
1594 | if (ps2_command(ps2dev, param, command)) | |
1595 | return -1; | |
1596 | ||
1597 | return 0; | |
1598 | } | |
1599 | ||
1600 | static int alps_command_mode_set_addr(struct psmouse *psmouse, int addr) | |
1601 | { | |
1602 | struct ps2dev *ps2dev = &psmouse->ps2dev; | |
1603 | struct alps_data *priv = psmouse->private; | |
1604 | int i, nibble; | |
1605 | ||
1606 | if (ps2_command(ps2dev, NULL, priv->addr_command)) | |
1607 | return -1; | |
1608 | ||
1609 | for (i = 12; i >= 0; i -= 4) { | |
1610 | nibble = (addr >> i) & 0xf; | |
1611 | if (alps_command_mode_send_nibble(psmouse, nibble)) | |
1612 | return -1; | |
1613 | } | |
1614 | ||
1615 | return 0; | |
1616 | } | |
1617 | ||
1618 | static int __alps_command_mode_read_reg(struct psmouse *psmouse, int addr) | |
1619 | { | |
1620 | struct ps2dev *ps2dev = &psmouse->ps2dev; | |
1621 | unsigned char param[4]; | |
1622 | ||
1623 | if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) | |
1624 | return -1; | |
1625 | ||
1626 | /* | |
1627 | * The address being read is returned in the first two bytes | |
1628 | * of the result. Check that this address matches the expected | |
1629 | * address. | |
1630 | */ | |
1631 | if (addr != ((param[0] << 8) | param[1])) | |
1632 | return -1; | |
1633 | ||
1634 | return param[2]; | |
1635 | } | |
1636 | ||
1637 | static int alps_command_mode_read_reg(struct psmouse *psmouse, int addr) | |
1638 | { | |
1639 | if (alps_command_mode_set_addr(psmouse, addr)) | |
1640 | return -1; | |
1641 | return __alps_command_mode_read_reg(psmouse, addr); | |
1642 | } | |
1643 | ||
1644 | static int __alps_command_mode_write_reg(struct psmouse *psmouse, u8 value) | |
1645 | { | |
1646 | if (alps_command_mode_send_nibble(psmouse, (value >> 4) & 0xf)) | |
1647 | return -1; | |
1648 | if (alps_command_mode_send_nibble(psmouse, value & 0xf)) | |
1649 | return -1; | |
1650 | return 0; | |
1651 | } | |
1652 | ||
1653 | static int alps_command_mode_write_reg(struct psmouse *psmouse, int addr, | |
1654 | u8 value) | |
1655 | { | |
1656 | if (alps_command_mode_set_addr(psmouse, addr)) | |
1657 | return -1; | |
1658 | return __alps_command_mode_write_reg(psmouse, value); | |
1659 | } | |
1660 | ||
24ba9707 KC |
1661 | static int alps_rpt_cmd(struct psmouse *psmouse, int init_command, |
1662 | int repeated_command, unsigned char *param) | |
1663 | { | |
1664 | struct ps2dev *ps2dev = &psmouse->ps2dev; | |
1665 | ||
1666 | param[0] = 0; | |
1667 | if (init_command && ps2_command(ps2dev, param, init_command)) | |
1668 | return -EIO; | |
1669 | ||
1670 | if (ps2_command(ps2dev, NULL, repeated_command) || | |
1671 | ps2_command(ps2dev, NULL, repeated_command) || | |
1672 | ps2_command(ps2dev, NULL, repeated_command)) | |
1673 | return -EIO; | |
1674 | ||
1675 | param[0] = param[1] = param[2] = 0xff; | |
1676 | if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) | |
1677 | return -EIO; | |
1678 | ||
39fbe585 DT |
1679 | psmouse_dbg(psmouse, "%2.2X report: %3ph\n", |
1680 | repeated_command, param); | |
24ba9707 KC |
1681 | return 0; |
1682 | } | |
1683 | ||
3808843c YT |
1684 | static bool alps_check_valid_firmware_id(unsigned char id[]) |
1685 | { | |
1686 | if (id[0] == 0x73) | |
1687 | return true; | |
1688 | ||
1689 | if (id[0] == 0x88 && | |
1690 | (id[1] == 0x07 || | |
1691 | id[1] == 0x08 || | |
1692 | (id[1] & 0xf0) == 0xb0 || | |
1693 | (id[1] & 0xf0) == 0xc0)) { | |
1694 | return true; | |
1695 | } | |
1696 | ||
1697 | return false; | |
1698 | } | |
1699 | ||
d18e53fc | 1700 | static int alps_enter_command_mode(struct psmouse *psmouse) |
25bded7c SF |
1701 | { |
1702 | unsigned char param[4]; | |
25bded7c | 1703 | |
24ba9707 | 1704 | if (alps_rpt_cmd(psmouse, 0, PSMOUSE_CMD_RESET_WRAP, param)) { |
25bded7c SF |
1705 | psmouse_err(psmouse, "failed to enter command mode\n"); |
1706 | return -1; | |
1707 | } | |
1708 | ||
3808843c | 1709 | if (!alps_check_valid_firmware_id(param)) { |
25bded7c | 1710 | psmouse_dbg(psmouse, |
24ba9707 | 1711 | "unknown response while entering command mode\n"); |
25bded7c SF |
1712 | return -1; |
1713 | } | |
25bded7c SF |
1714 | return 0; |
1715 | } | |
1716 | ||
1717 | static inline int alps_exit_command_mode(struct psmouse *psmouse) | |
1718 | { | |
1719 | struct ps2dev *ps2dev = &psmouse->ps2dev; | |
1720 | if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM)) | |
1721 | return -1; | |
1722 | return 0; | |
1723 | } | |
1724 | ||
1da177e4 LT |
1725 | /* |
1726 | * For DualPoint devices select the device that should respond to | |
1727 | * subsequent commands. It looks like glidepad is behind stickpointer, | |
1728 | * I'd thought it would be other way around... | |
1729 | */ | |
25bded7c | 1730 | static int alps_passthrough_mode_v2(struct psmouse *psmouse, bool enable) |
1da177e4 LT |
1731 | { |
1732 | struct ps2dev *ps2dev = &psmouse->ps2dev; | |
1da177e4 LT |
1733 | int cmd = enable ? PSMOUSE_CMD_SETSCALE21 : PSMOUSE_CMD_SETSCALE11; |
1734 | ||
1735 | if (ps2_command(ps2dev, NULL, cmd) || | |
1736 | ps2_command(ps2dev, NULL, cmd) || | |
1737 | ps2_command(ps2dev, NULL, cmd) || | |
1738 | ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE)) | |
1739 | return -1; | |
1740 | ||
1741 | /* we may get 3 more bytes, just ignore them */ | |
c611763d | 1742 | ps2_drain(ps2dev, 3, 100); |
1da177e4 LT |
1743 | |
1744 | return 0; | |
1745 | } | |
1746 | ||
25bded7c | 1747 | static int alps_absolute_mode_v1_v2(struct psmouse *psmouse) |
1da177e4 LT |
1748 | { |
1749 | struct ps2dev *ps2dev = &psmouse->ps2dev; | |
1750 | ||
1751 | /* Try ALPS magic knock - 4 disable before enable */ | |
1752 | if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || | |
1753 | ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || | |
1754 | ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || | |
1755 | ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || | |
1756 | ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)) | |
1757 | return -1; | |
1758 | ||
1759 | /* | |
1760 | * Switch mouse to poll (remote) mode so motion data will not | |
1761 | * get in our way | |
1762 | */ | |
1763 | return ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETPOLL); | |
1764 | } | |
1765 | ||
95f75e91 YT |
1766 | static int alps_monitor_mode_send_word(struct psmouse *psmouse, u16 word) |
1767 | { | |
1768 | int i, nibble; | |
1769 | ||
1770 | /* | |
1771 | * b0-b11 are valid bits, send sequence is inverse. | |
1772 | * e.g. when word = 0x0123, nibble send sequence is 3, 2, 1 | |
1773 | */ | |
1774 | for (i = 0; i <= 8; i += 4) { | |
1775 | nibble = (word >> i) & 0xf; | |
1776 | if (alps_command_mode_send_nibble(psmouse, nibble)) | |
1777 | return -1; | |
1778 | } | |
1779 | ||
1780 | return 0; | |
1781 | } | |
1782 | ||
1783 | static int alps_monitor_mode_write_reg(struct psmouse *psmouse, | |
1784 | u16 addr, u16 value) | |
1785 | { | |
1786 | struct ps2dev *ps2dev = &psmouse->ps2dev; | |
1787 | ||
1788 | /* 0x0A0 is the command to write the word */ | |
1789 | if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE) || | |
1790 | alps_monitor_mode_send_word(psmouse, 0x0A0) || | |
1791 | alps_monitor_mode_send_word(psmouse, addr) || | |
1792 | alps_monitor_mode_send_word(psmouse, value) || | |
1793 | ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE)) | |
1794 | return -1; | |
1795 | ||
1796 | return 0; | |
1797 | } | |
1798 | ||
1799 | static int alps_monitor_mode(struct psmouse *psmouse, bool enable) | |
1800 | { | |
1801 | struct ps2dev *ps2dev = &psmouse->ps2dev; | |
1802 | ||
1803 | if (enable) { | |
1804 | /* EC E9 F5 F5 E7 E6 E7 E9 to enter monitor mode */ | |
1805 | if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) || | |
1806 | ps2_command(ps2dev, NULL, PSMOUSE_CMD_GETINFO) || | |
1807 | ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || | |
1808 | ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || | |
1809 | ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || | |
1810 | ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || | |
1811 | ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || | |
1812 | ps2_command(ps2dev, NULL, PSMOUSE_CMD_GETINFO)) | |
1813 | return -1; | |
1814 | } else { | |
1815 | /* EC to exit monitor mode */ | |
1816 | if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP)) | |
1817 | return -1; | |
1818 | } | |
1819 | ||
1820 | return 0; | |
1821 | } | |
1822 | ||
1823 | static int alps_absolute_mode_v6(struct psmouse *psmouse) | |
1824 | { | |
1825 | u16 reg_val = 0x181; | |
1826 | int ret = -1; | |
1827 | ||
1828 | /* enter monitor mode, to write the register */ | |
1829 | if (alps_monitor_mode(psmouse, true)) | |
1830 | return -1; | |
1831 | ||
1832 | ret = alps_monitor_mode_write_reg(psmouse, 0x000, reg_val); | |
1833 | ||
1834 | if (alps_monitor_mode(psmouse, false)) | |
1835 | ret = -1; | |
1836 | ||
1837 | return ret; | |
1838 | } | |
1839 | ||
1da177e4 LT |
1840 | static int alps_get_status(struct psmouse *psmouse, char *param) |
1841 | { | |
1da177e4 | 1842 | /* Get status: 0xF5 0xF5 0xF5 0xE9 */ |
24ba9707 | 1843 | if (alps_rpt_cmd(psmouse, 0, PSMOUSE_CMD_DISABLE, param)) |
1da177e4 LT |
1844 | return -1; |
1845 | ||
1da177e4 LT |
1846 | return 0; |
1847 | } | |
1848 | ||
1849 | /* | |
1850 | * Turn touchpad tapping on or off. The sequences are: | |
1851 | * 0xE9 0xF5 0xF5 0xF3 0x0A to enable, | |
1852 | * 0xE9 0xF5 0xF5 0xE8 0x00 to disable. | |
1853 | * My guess that 0xE9 (GetInfo) is here as a sync point. | |
1854 | * For models that also have stickpointer (DualPoints) its tapping | |
1855 | * is controlled separately (0xE6 0xE6 0xE6 0xF3 0x14|0x0A) but | |
1856 | * we don't fiddle with it. | |
1857 | */ | |
1858 | static int alps_tap_mode(struct psmouse *psmouse, int enable) | |
1859 | { | |
1860 | struct ps2dev *ps2dev = &psmouse->ps2dev; | |
1861 | int cmd = enable ? PSMOUSE_CMD_SETRATE : PSMOUSE_CMD_SETRES; | |
1862 | unsigned char tap_arg = enable ? 0x0A : 0x00; | |
1863 | unsigned char param[4]; | |
1864 | ||
1865 | if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO) || | |
1866 | ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || | |
1867 | ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || | |
1868 | ps2_command(ps2dev, &tap_arg, cmd)) | |
1869 | return -1; | |
1870 | ||
1871 | if (alps_get_status(psmouse, param)) | |
1872 | return -1; | |
1873 | ||
1874 | return 0; | |
1875 | } | |
1876 | ||
f0d5c6f4 DT |
1877 | /* |
1878 | * alps_poll() - poll the touchpad for current motion packet. | |
1879 | * Used in resync. | |
1880 | */ | |
1881 | static int alps_poll(struct psmouse *psmouse) | |
1882 | { | |
1883 | struct alps_data *priv = psmouse->private; | |
b46615fe | 1884 | unsigned char buf[sizeof(psmouse->packet)]; |
b7802c5c | 1885 | bool poll_failed; |
f0d5c6f4 | 1886 | |
99df65e7 | 1887 | if (priv->flags & ALPS_PASS) |
25bded7c | 1888 | alps_passthrough_mode_v2(psmouse, true); |
f0d5c6f4 DT |
1889 | |
1890 | poll_failed = ps2_command(&psmouse->ps2dev, buf, | |
1891 | PSMOUSE_CMD_POLL | (psmouse->pktsize << 8)) < 0; | |
1892 | ||
99df65e7 | 1893 | if (priv->flags & ALPS_PASS) |
25bded7c | 1894 | alps_passthrough_mode_v2(psmouse, false); |
f0d5c6f4 | 1895 | |
99df65e7 | 1896 | if (poll_failed || (buf[0] & priv->mask0) != priv->byte0) |
f0d5c6f4 DT |
1897 | return -1; |
1898 | ||
1899 | if ((psmouse->badbyte & 0xc8) == 0x08) { | |
1900 | /* | |
1901 | * Poll the track stick ... | |
1902 | */ | |
1903 | if (ps2_command(&psmouse->ps2dev, buf, PSMOUSE_CMD_POLL | (3 << 8))) | |
1904 | return -1; | |
1905 | } | |
1906 | ||
1907 | memcpy(psmouse->packet, buf, sizeof(buf)); | |
1908 | return 0; | |
1909 | } | |
1910 | ||
25bded7c | 1911 | static int alps_hw_init_v1_v2(struct psmouse *psmouse) |
1da177e4 LT |
1912 | { |
1913 | struct alps_data *priv = psmouse->private; | |
f3a5c73d | 1914 | |
99df65e7 | 1915 | if ((priv->flags & ALPS_PASS) && |
25bded7c | 1916 | alps_passthrough_mode_v2(psmouse, true)) { |
1da177e4 | 1917 | return -1; |
b7802c5c | 1918 | } |
1da177e4 | 1919 | |
b7802c5c | 1920 | if (alps_tap_mode(psmouse, true)) { |
b5d21704 | 1921 | psmouse_warn(psmouse, "Failed to enable hardware tapping\n"); |
1da177e4 | 1922 | return -1; |
963f626d | 1923 | } |
1da177e4 | 1924 | |
25bded7c | 1925 | if (alps_absolute_mode_v1_v2(psmouse)) { |
b5d21704 | 1926 | psmouse_err(psmouse, "Failed to enable absolute mode\n"); |
1da177e4 LT |
1927 | return -1; |
1928 | } | |
1929 | ||
99df65e7 | 1930 | if ((priv->flags & ALPS_PASS) && |
25bded7c | 1931 | alps_passthrough_mode_v2(psmouse, false)) { |
1da177e4 | 1932 | return -1; |
b7802c5c | 1933 | } |
1da177e4 | 1934 | |
1e0c5b12 DT |
1935 | /* ALPS needs stream mode, otherwise it won't report any data */ |
1936 | if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSTREAM)) { | |
b5d21704 | 1937 | psmouse_err(psmouse, "Failed to enable stream mode\n"); |
1e0c5b12 DT |
1938 | return -1; |
1939 | } | |
1940 | ||
1941 | return 0; | |
1942 | } | |
1943 | ||
95f75e91 YT |
1944 | static int alps_hw_init_v6(struct psmouse *psmouse) |
1945 | { | |
1946 | unsigned char param[2] = {0xC8, 0x14}; | |
1947 | ||
1948 | /* Enter passthrough mode to let trackpoint enter 6byte raw mode */ | |
1949 | if (alps_passthrough_mode_v2(psmouse, true)) | |
1950 | return -1; | |
1951 | ||
1952 | if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || | |
1953 | ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || | |
1954 | ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || | |
1955 | ps2_command(&psmouse->ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) || | |
1956 | ps2_command(&psmouse->ps2dev, ¶m[1], PSMOUSE_CMD_SETRATE)) | |
1957 | return -1; | |
1958 | ||
1959 | if (alps_passthrough_mode_v2(psmouse, false)) | |
1960 | return -1; | |
1961 | ||
1962 | if (alps_absolute_mode_v6(psmouse)) { | |
1963 | psmouse_err(psmouse, "Failed to enable absolute mode\n"); | |
1964 | return -1; | |
1965 | } | |
1966 | ||
1967 | return 0; | |
1968 | } | |
1969 | ||
25bded7c | 1970 | /* |
cd401204 | 1971 | * Enable or disable passthrough mode to the trackstick. |
25bded7c | 1972 | */ |
cd401204 KC |
1973 | static int alps_passthrough_mode_v3(struct psmouse *psmouse, |
1974 | int reg_base, bool enable) | |
25bded7c | 1975 | { |
cd401204 | 1976 | int reg_val, ret = -1; |
25bded7c | 1977 | |
d18e53fc | 1978 | if (alps_enter_command_mode(psmouse)) |
25bded7c SF |
1979 | return -1; |
1980 | ||
cd401204 KC |
1981 | reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x0008); |
1982 | if (reg_val == -1) | |
1983 | goto error; | |
1984 | ||
25bded7c SF |
1985 | if (enable) |
1986 | reg_val |= 0x01; | |
1987 | else | |
1988 | reg_val &= ~0x01; | |
1989 | ||
cd401204 | 1990 | ret = __alps_command_mode_write_reg(psmouse, reg_val); |
25bded7c | 1991 | |
cd401204 KC |
1992 | error: |
1993 | if (alps_exit_command_mode(psmouse)) | |
1994 | ret = -1; | |
1995 | return ret; | |
25bded7c SF |
1996 | } |
1997 | ||
1998 | /* Must be in command mode when calling this function */ | |
1999 | static int alps_absolute_mode_v3(struct psmouse *psmouse) | |
2000 | { | |
2001 | int reg_val; | |
2002 | ||
2003 | reg_val = alps_command_mode_read_reg(psmouse, 0x0004); | |
2004 | if (reg_val == -1) | |
2005 | return -1; | |
2006 | ||
2007 | reg_val |= 0x06; | |
2008 | if (__alps_command_mode_write_reg(psmouse, reg_val)) | |
2009 | return -1; | |
2010 | ||
2011 | return 0; | |
2012 | } | |
2013 | ||
cd401204 | 2014 | static int alps_probe_trackstick_v3(struct psmouse *psmouse, int reg_base) |
25bded7c | 2015 | { |
cd401204 | 2016 | int ret = -EIO, reg_val; |
25bded7c | 2017 | |
d18e53fc | 2018 | if (alps_enter_command_mode(psmouse)) |
25bded7c SF |
2019 | goto error; |
2020 | ||
cd401204 | 2021 | reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x08); |
25bded7c SF |
2022 | if (reg_val == -1) |
2023 | goto error; | |
cd401204 KC |
2024 | |
2025 | /* bit 7: trackstick is present */ | |
2026 | ret = reg_val & 0x80 ? 0 : -ENODEV; | |
2027 | ||
2028 | error: | |
2029 | alps_exit_command_mode(psmouse); | |
2030 | return ret; | |
2031 | } | |
2032 | ||
2033 | static int alps_setup_trackstick_v3(struct psmouse *psmouse, int reg_base) | |
2034 | { | |
2035 | struct ps2dev *ps2dev = &psmouse->ps2dev; | |
2036 | int ret = 0; | |
2037 | unsigned char param[4]; | |
2038 | ||
2039 | if (alps_passthrough_mode_v3(psmouse, reg_base, true)) | |
2040 | return -EIO; | |
2041 | ||
2042 | /* | |
2043 | * E7 report for the trackstick | |
2044 | * | |
2045 | * There have been reports of failures to seem to trace back | |
2046 | * to the above trackstick check failing. When these occur | |
2047 | * this E7 report fails, so when that happens we continue | |
2048 | * with the assumption that there isn't a trackstick after | |
2049 | * all. | |
2050 | */ | |
2051 | if (alps_rpt_cmd(psmouse, 0, PSMOUSE_CMD_SETSCALE21, param)) { | |
a09221e8 | 2052 | psmouse_warn(psmouse, "Failed to initialize trackstick (E7 report failed)\n"); |
cd401204 KC |
2053 | ret = -ENODEV; |
2054 | } else { | |
39fbe585 | 2055 | psmouse_dbg(psmouse, "trackstick E7 report: %3ph\n", param); |
25bded7c SF |
2056 | |
2057 | /* | |
cd401204 KC |
2058 | * Not sure what this does, but it is absolutely |
2059 | * essential. Without it, the touchpad does not | |
2060 | * work at all and the trackstick just emits normal | |
2061 | * PS/2 packets. | |
25bded7c | 2062 | */ |
cd401204 KC |
2063 | if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || |
2064 | ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || | |
2065 | ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || | |
2066 | alps_command_mode_send_nibble(psmouse, 0x9) || | |
2067 | alps_command_mode_send_nibble(psmouse, 0x4)) { | |
2068 | psmouse_err(psmouse, | |
2069 | "Error sending magic E6 sequence\n"); | |
2070 | ret = -EIO; | |
2071 | goto error; | |
25bded7c SF |
2072 | } |
2073 | ||
cd401204 KC |
2074 | /* |
2075 | * This ensures the trackstick packets are in the format | |
2076 | * supported by this driver. If bit 1 isn't set the packet | |
2077 | * format is different. | |
2078 | */ | |
d18e53fc | 2079 | if (alps_enter_command_mode(psmouse) || |
cd401204 KC |
2080 | alps_command_mode_write_reg(psmouse, |
2081 | reg_base + 0x08, 0x82) || | |
2082 | alps_exit_command_mode(psmouse)) | |
2083 | ret = -EIO; | |
25bded7c SF |
2084 | } |
2085 | ||
cd401204 KC |
2086 | error: |
2087 | if (alps_passthrough_mode_v3(psmouse, reg_base, false)) | |
2088 | ret = -EIO; | |
2089 | ||
2090 | return ret; | |
2091 | } | |
2092 | ||
2093 | static int alps_hw_init_v3(struct psmouse *psmouse) | |
2094 | { | |
2095 | struct ps2dev *ps2dev = &psmouse->ps2dev; | |
2096 | int reg_val; | |
2097 | unsigned char param[4]; | |
2098 | ||
2099 | reg_val = alps_probe_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE); | |
2100 | if (reg_val == -EIO) | |
2101 | goto error; | |
39fbe585 | 2102 | |
cd401204 KC |
2103 | if (reg_val == 0 && |
2104 | alps_setup_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE) == -EIO) | |
2105 | goto error; | |
2106 | ||
d18e53fc | 2107 | if (alps_enter_command_mode(psmouse) || |
cd401204 | 2108 | alps_absolute_mode_v3(psmouse)) { |
25bded7c SF |
2109 | psmouse_err(psmouse, "Failed to enter absolute mode\n"); |
2110 | goto error; | |
2111 | } | |
2112 | ||
2113 | reg_val = alps_command_mode_read_reg(psmouse, 0x0006); | |
2114 | if (reg_val == -1) | |
2115 | goto error; | |
2116 | if (__alps_command_mode_write_reg(psmouse, reg_val | 0x01)) | |
2117 | goto error; | |
2118 | ||
2119 | reg_val = alps_command_mode_read_reg(psmouse, 0x0007); | |
2120 | if (reg_val == -1) | |
2121 | goto error; | |
2122 | if (__alps_command_mode_write_reg(psmouse, reg_val | 0x01)) | |
2123 | goto error; | |
2124 | ||
2125 | if (alps_command_mode_read_reg(psmouse, 0x0144) == -1) | |
2126 | goto error; | |
2127 | if (__alps_command_mode_write_reg(psmouse, 0x04)) | |
2128 | goto error; | |
2129 | ||
2130 | if (alps_command_mode_read_reg(psmouse, 0x0159) == -1) | |
2131 | goto error; | |
2132 | if (__alps_command_mode_write_reg(psmouse, 0x03)) | |
2133 | goto error; | |
2134 | ||
2135 | if (alps_command_mode_read_reg(psmouse, 0x0163) == -1) | |
2136 | goto error; | |
2137 | if (alps_command_mode_write_reg(psmouse, 0x0163, 0x03)) | |
2138 | goto error; | |
2139 | ||
2140 | if (alps_command_mode_read_reg(psmouse, 0x0162) == -1) | |
2141 | goto error; | |
2142 | if (alps_command_mode_write_reg(psmouse, 0x0162, 0x04)) | |
2143 | goto error; | |
2144 | ||
25bded7c SF |
2145 | alps_exit_command_mode(psmouse); |
2146 | ||
2147 | /* Set rate and enable data reporting */ | |
2148 | param[0] = 0x64; | |
2149 | if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE) || | |
2150 | ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)) { | |
2151 | psmouse_err(psmouse, "Failed to enable data reporting\n"); | |
2152 | return -1; | |
2153 | } | |
2154 | ||
2155 | return 0; | |
2156 | ||
25bded7c SF |
2157 | error: |
2158 | /* | |
2159 | * Leaving the touchpad in command mode will essentially render | |
2160 | * it unusable until the machine reboots, so exit it here just | |
2161 | * to be safe | |
2162 | */ | |
2163 | alps_exit_command_mode(psmouse); | |
2164 | return -1; | |
2165 | } | |
2166 | ||
f3f33c67 HG |
2167 | static int alps_get_v3_v7_resolution(struct psmouse *psmouse, int reg_pitch) |
2168 | { | |
2169 | int reg, x_pitch, y_pitch, x_electrode, y_electrode, x_phys, y_phys; | |
2170 | struct alps_data *priv = psmouse->private; | |
2171 | ||
2172 | reg = alps_command_mode_read_reg(psmouse, reg_pitch); | |
2173 | if (reg < 0) | |
2174 | return reg; | |
2175 | ||
2176 | x_pitch = (char)(reg << 4) >> 4; /* sign extend lower 4 bits */ | |
2177 | x_pitch = 50 + 2 * x_pitch; /* In 0.1 mm units */ | |
2178 | ||
2179 | y_pitch = (char)reg >> 4; /* sign extend upper 4 bits */ | |
2180 | y_pitch = 36 + 2 * y_pitch; /* In 0.1 mm units */ | |
2181 | ||
2182 | reg = alps_command_mode_read_reg(psmouse, reg_pitch + 1); | |
2183 | if (reg < 0) | |
2184 | return reg; | |
2185 | ||
2186 | x_electrode = (char)(reg << 4) >> 4; /* sign extend lower 4 bits */ | |
2187 | x_electrode = 17 + x_electrode; | |
2188 | ||
2189 | y_electrode = (char)reg >> 4; /* sign extend upper 4 bits */ | |
2190 | y_electrode = 13 + y_electrode; | |
2191 | ||
2192 | x_phys = x_pitch * (x_electrode - 1); /* In 0.1 mm units */ | |
2193 | y_phys = y_pitch * (y_electrode - 1); /* In 0.1 mm units */ | |
2194 | ||
2195 | priv->x_res = priv->x_max * 10 / x_phys; /* units / mm */ | |
2196 | priv->y_res = priv->y_max * 10 / y_phys; /* units / mm */ | |
2197 | ||
2198 | psmouse_dbg(psmouse, | |
2199 | "pitch %dx%d num-electrodes %dx%d physical size %dx%d mm res %dx%d\n", | |
2200 | x_pitch, y_pitch, x_electrode, y_electrode, | |
2201 | x_phys / 10, y_phys / 10, priv->x_res, priv->y_res); | |
2202 | ||
2203 | return 0; | |
2204 | } | |
2205 | ||
1302bac3 KC |
2206 | static int alps_hw_init_rushmore_v3(struct psmouse *psmouse) |
2207 | { | |
cd401204 | 2208 | struct alps_data *priv = psmouse->private; |
1302bac3 KC |
2209 | struct ps2dev *ps2dev = &psmouse->ps2dev; |
2210 | int reg_val, ret = -1; | |
2211 | ||
cd401204 KC |
2212 | if (priv->flags & ALPS_DUALPOINT) { |
2213 | reg_val = alps_setup_trackstick_v3(psmouse, | |
2214 | ALPS_REG_BASE_RUSHMORE); | |
2215 | if (reg_val == -EIO) | |
2216 | goto error; | |
cd401204 KC |
2217 | } |
2218 | ||
d18e53fc | 2219 | if (alps_enter_command_mode(psmouse) || |
1302bac3 KC |
2220 | alps_command_mode_read_reg(psmouse, 0xc2d9) == -1 || |
2221 | alps_command_mode_write_reg(psmouse, 0xc2cb, 0x00)) | |
2222 | goto error; | |
2223 | ||
f3f33c67 HG |
2224 | if (alps_get_v3_v7_resolution(psmouse, 0xc2da)) |
2225 | goto error; | |
2226 | ||
1302bac3 KC |
2227 | reg_val = alps_command_mode_read_reg(psmouse, 0xc2c6); |
2228 | if (reg_val == -1) | |
2229 | goto error; | |
2230 | if (__alps_command_mode_write_reg(psmouse, reg_val & 0xfd)) | |
2231 | goto error; | |
2232 | ||
2233 | if (alps_command_mode_write_reg(psmouse, 0xc2c9, 0x64)) | |
2234 | goto error; | |
2235 | ||
2236 | /* enter absolute mode */ | |
2237 | reg_val = alps_command_mode_read_reg(psmouse, 0xc2c4); | |
2238 | if (reg_val == -1) | |
2239 | goto error; | |
2240 | if (__alps_command_mode_write_reg(psmouse, reg_val | 0x02)) | |
2241 | goto error; | |
2242 | ||
2243 | alps_exit_command_mode(psmouse); | |
2244 | return ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE); | |
2245 | ||
2246 | error: | |
2247 | alps_exit_command_mode(psmouse); | |
2248 | return ret; | |
2249 | } | |
2250 | ||
25bded7c SF |
2251 | /* Must be in command mode when calling this function */ |
2252 | static int alps_absolute_mode_v4(struct psmouse *psmouse) | |
2253 | { | |
2254 | int reg_val; | |
2255 | ||
2256 | reg_val = alps_command_mode_read_reg(psmouse, 0x0004); | |
2257 | if (reg_val == -1) | |
2258 | return -1; | |
2259 | ||
2260 | reg_val |= 0x02; | |
2261 | if (__alps_command_mode_write_reg(psmouse, reg_val)) | |
2262 | return -1; | |
2263 | ||
2264 | return 0; | |
2265 | } | |
2266 | ||
2267 | static int alps_hw_init_v4(struct psmouse *psmouse) | |
2268 | { | |
25bded7c SF |
2269 | struct ps2dev *ps2dev = &psmouse->ps2dev; |
2270 | unsigned char param[4]; | |
2271 | ||
d18e53fc | 2272 | if (alps_enter_command_mode(psmouse)) |
25bded7c SF |
2273 | goto error; |
2274 | ||
2275 | if (alps_absolute_mode_v4(psmouse)) { | |
2276 | psmouse_err(psmouse, "Failed to enter absolute mode\n"); | |
2277 | goto error; | |
2278 | } | |
2279 | ||
2280 | if (alps_command_mode_write_reg(psmouse, 0x0007, 0x8c)) | |
2281 | goto error; | |
2282 | ||
2283 | if (alps_command_mode_write_reg(psmouse, 0x0149, 0x03)) | |
2284 | goto error; | |
2285 | ||
2286 | if (alps_command_mode_write_reg(psmouse, 0x0160, 0x03)) | |
2287 | goto error; | |
2288 | ||
2289 | if (alps_command_mode_write_reg(psmouse, 0x017f, 0x15)) | |
2290 | goto error; | |
2291 | ||
2292 | if (alps_command_mode_write_reg(psmouse, 0x0151, 0x01)) | |
2293 | goto error; | |
2294 | ||
2295 | if (alps_command_mode_write_reg(psmouse, 0x0168, 0x03)) | |
2296 | goto error; | |
2297 | ||
2298 | if (alps_command_mode_write_reg(psmouse, 0x014a, 0x03)) | |
2299 | goto error; | |
2300 | ||
2301 | if (alps_command_mode_write_reg(psmouse, 0x0161, 0x03)) | |
2302 | goto error; | |
2303 | ||
2304 | alps_exit_command_mode(psmouse); | |
2305 | ||
2306 | /* | |
2307 | * This sequence changes the output from a 9-byte to an | |
2308 | * 8-byte format. All the same data seems to be present, | |
2309 | * just in a more compact format. | |
2310 | */ | |
2311 | param[0] = 0xc8; | |
2312 | param[1] = 0x64; | |
2313 | param[2] = 0x50; | |
2314 | if (ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) || | |
2315 | ps2_command(ps2dev, ¶m[1], PSMOUSE_CMD_SETRATE) || | |
2316 | ps2_command(ps2dev, ¶m[2], PSMOUSE_CMD_SETRATE) || | |
2317 | ps2_command(ps2dev, param, PSMOUSE_CMD_GETID)) | |
2318 | return -1; | |
2319 | ||
2320 | /* Set rate and enable data reporting */ | |
2321 | param[0] = 0x64; | |
2322 | if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE) || | |
2323 | ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)) { | |
2324 | psmouse_err(psmouse, "Failed to enable data reporting\n"); | |
2325 | return -1; | |
2326 | } | |
2327 | ||
2328 | return 0; | |
2329 | ||
2330 | error: | |
2331 | /* | |
2332 | * Leaving the touchpad in command mode will essentially render | |
2333 | * it unusable until the machine reboots, so exit it here just | |
2334 | * to be safe | |
2335 | */ | |
2336 | alps_exit_command_mode(psmouse); | |
2337 | return -1; | |
2338 | } | |
2339 | ||
3db5b9f7 MO |
2340 | static int alps_get_otp_values_ss4_v2(struct psmouse *psmouse, |
2341 | unsigned char index, unsigned char otp[]) | |
2342 | { | |
2343 | struct ps2dev *ps2dev = &psmouse->ps2dev; | |
2344 | ||
2345 | switch (index) { | |
2346 | case 0: | |
2347 | if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) || | |
2348 | ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) || | |
2349 | ps2_command(ps2dev, otp, PSMOUSE_CMD_GETINFO)) | |
2350 | return -1; | |
2351 | ||
2352 | break; | |
2353 | ||
2354 | case 1: | |
2355 | if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL) || | |
2356 | ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL) || | |
2357 | ps2_command(ps2dev, otp, PSMOUSE_CMD_GETINFO)) | |
2358 | return -1; | |
2359 | ||
2360 | break; | |
2361 | } | |
2362 | ||
2363 | return 0; | |
2364 | } | |
2365 | ||
07f19e3d FW |
2366 | static int alps_update_device_area_ss4_v2(unsigned char otp[][4], |
2367 | struct alps_data *priv) | |
3db5b9f7 MO |
2368 | { |
2369 | int num_x_electrode; | |
2370 | int num_y_electrode; | |
2371 | int x_pitch, y_pitch, x_phys, y_phys; | |
2372 | ||
2373 | num_x_electrode = SS4_NUMSENSOR_XOFFSET + (otp[1][0] & 0x0F); | |
2374 | num_y_electrode = SS4_NUMSENSOR_YOFFSET + ((otp[1][0] >> 4) & 0x0F); | |
2375 | ||
2376 | priv->x_max = (num_x_electrode - 1) * SS4_COUNT_PER_ELECTRODE; | |
2377 | priv->y_max = (num_y_electrode - 1) * SS4_COUNT_PER_ELECTRODE; | |
2378 | ||
2379 | x_pitch = ((otp[1][2] >> 2) & 0x07) + SS4_MIN_PITCH_MM; | |
2380 | y_pitch = ((otp[1][2] >> 5) & 0x07) + SS4_MIN_PITCH_MM; | |
2381 | ||
2382 | x_phys = x_pitch * (num_x_electrode - 1); /* In 0.1 mm units */ | |
2383 | y_phys = y_pitch * (num_y_electrode - 1); /* In 0.1 mm units */ | |
2384 | ||
2385 | priv->x_res = priv->x_max * 10 / x_phys; /* units / mm */ | |
2386 | priv->y_res = priv->y_max * 10 / y_phys; /* units / mm */ | |
2387 | ||
2388 | return 0; | |
2389 | } | |
2390 | ||
07f19e3d FW |
2391 | static int alps_update_btn_info_ss4_v2(unsigned char otp[][4], |
2392 | struct alps_data *priv) | |
3db5b9f7 | 2393 | { |
3db5b9f7 MO |
2394 | unsigned char is_btnless; |
2395 | ||
2396 | is_btnless = (otp[1][1] >> 3) & 0x01; | |
2397 | ||
2398 | if (is_btnless) | |
2399 | priv->flags |= ALPS_BUTTONPAD; | |
2400 | ||
2401 | return 0; | |
2402 | } | |
2403 | ||
2404 | static int alps_set_defaults_ss4_v2(struct psmouse *psmouse, | |
2405 | struct alps_data *priv) | |
2406 | { | |
2407 | unsigned char otp[2][4]; | |
2408 | ||
2409 | memset(otp, 0, sizeof(otp)); | |
2410 | ||
2411 | if (alps_get_otp_values_ss4_v2(psmouse, 0, &otp[0][0]) || | |
2412 | alps_get_otp_values_ss4_v2(psmouse, 1, &otp[1][0])) | |
2413 | return -1; | |
2414 | ||
2415 | alps_update_device_area_ss4_v2(otp, priv); | |
2416 | ||
2417 | alps_update_btn_info_ss4_v2(otp, priv); | |
2418 | ||
2419 | return 0; | |
2420 | } | |
2421 | ||
ee65d4b3 YT |
2422 | static int alps_dolphin_get_device_area(struct psmouse *psmouse, |
2423 | struct alps_data *priv) | |
2424 | { | |
2425 | struct ps2dev *ps2dev = &psmouse->ps2dev; | |
2426 | unsigned char param[4] = {0}; | |
2427 | int num_x_electrode, num_y_electrode; | |
2428 | ||
2429 | if (alps_enter_command_mode(psmouse)) | |
2430 | return -1; | |
2431 | ||
2432 | param[0] = 0x0a; | |
2433 | if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) || | |
2434 | ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL) || | |
2435 | ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL) || | |
2436 | ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) || | |
2437 | ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE)) | |
2438 | return -1; | |
2439 | ||
2440 | if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) | |
2441 | return -1; | |
2442 | ||
2443 | /* | |
2444 | * Dolphin's sensor line number is not fixed. It can be calculated | |
2445 | * by adding the device's register value with DOLPHIN_PROFILE_X/YOFFSET. | |
2446 | * Further more, we can get device's x_max and y_max by multiplying | |
2447 | * sensor line number with DOLPHIN_COUNT_PER_ELECTRODE. | |
2448 | * | |
2449 | * e.g. When we get register's sensor_x = 11 & sensor_y = 8, | |
2450 | * real sensor line number X = 11 + 8 = 19, and | |
2451 | * real sensor line number Y = 8 + 1 = 9. | |
2452 | * So, x_max = (19 - 1) * 64 = 1152, and | |
2453 | * y_max = (9 - 1) * 64 = 512. | |
2454 | */ | |
2455 | num_x_electrode = DOLPHIN_PROFILE_XOFFSET + (param[2] & 0x0F); | |
2456 | num_y_electrode = DOLPHIN_PROFILE_YOFFSET + ((param[2] >> 4) & 0x0F); | |
2457 | priv->x_bits = num_x_electrode; | |
2458 | priv->y_bits = num_y_electrode; | |
2459 | priv->x_max = (num_x_electrode - 1) * DOLPHIN_COUNT_PER_ELECTRODE; | |
2460 | priv->y_max = (num_y_electrode - 1) * DOLPHIN_COUNT_PER_ELECTRODE; | |
2461 | ||
2462 | if (alps_exit_command_mode(psmouse)) | |
2463 | return -1; | |
2464 | ||
2465 | return 0; | |
2466 | } | |
2467 | ||
75af9e56 DT |
2468 | static int alps_hw_init_dolphin_v1(struct psmouse *psmouse) |
2469 | { | |
2470 | struct ps2dev *ps2dev = &psmouse->ps2dev; | |
2471 | unsigned char param[2]; | |
2472 | ||
2473 | /* This is dolphin "v1" as empirically defined by florin9doi */ | |
2474 | param[0] = 0x64; | |
2475 | param[1] = 0x28; | |
2476 | ||
2477 | if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) || | |
2478 | ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) || | |
2479 | ps2_command(ps2dev, ¶m[1], PSMOUSE_CMD_SETRATE)) | |
2480 | return -1; | |
2481 | ||
2482 | return 0; | |
2483 | } | |
2484 | ||
3808843c YT |
2485 | static int alps_hw_init_v7(struct psmouse *psmouse) |
2486 | { | |
2487 | struct ps2dev *ps2dev = &psmouse->ps2dev; | |
2488 | int reg_val, ret = -1; | |
2489 | ||
2490 | if (alps_enter_command_mode(psmouse) || | |
2491 | alps_command_mode_read_reg(psmouse, 0xc2d9) == -1) | |
2492 | goto error; | |
2493 | ||
f3f33c67 HG |
2494 | if (alps_get_v3_v7_resolution(psmouse, 0xc397)) |
2495 | goto error; | |
2496 | ||
3808843c YT |
2497 | if (alps_command_mode_write_reg(psmouse, 0xc2c9, 0x64)) |
2498 | goto error; | |
2499 | ||
2500 | reg_val = alps_command_mode_read_reg(psmouse, 0xc2c4); | |
2501 | if (reg_val == -1) | |
2502 | goto error; | |
2503 | if (__alps_command_mode_write_reg(psmouse, reg_val | 0x02)) | |
2504 | goto error; | |
2505 | ||
2506 | alps_exit_command_mode(psmouse); | |
2507 | return ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE); | |
2508 | ||
2509 | error: | |
2510 | alps_exit_command_mode(psmouse); | |
2511 | return ret; | |
2512 | } | |
2513 | ||
3db5b9f7 MO |
2514 | static int alps_hw_init_ss4_v2(struct psmouse *psmouse) |
2515 | { | |
2516 | struct ps2dev *ps2dev = &psmouse->ps2dev; | |
2517 | char param[2] = {0x64, 0x28}; | |
2518 | int ret = -1; | |
2519 | ||
2520 | /* enter absolute mode */ | |
2521 | if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) || | |
2522 | ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) || | |
2523 | ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) || | |
2524 | ps2_command(ps2dev, ¶m[1], PSMOUSE_CMD_SETRATE)) { | |
2525 | goto error; | |
2526 | } | |
2527 | ||
2528 | /* T.B.D. Decread noise packet number, delete in the future */ | |
2529 | if (alps_exit_command_mode(psmouse) || | |
2530 | alps_enter_command_mode(psmouse) || | |
2531 | alps_command_mode_write_reg(psmouse, 0x001D, 0x20)) { | |
2532 | goto error; | |
2533 | } | |
2534 | alps_exit_command_mode(psmouse); | |
2535 | ||
2536 | return ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE); | |
2537 | ||
2538 | error: | |
2539 | alps_exit_command_mode(psmouse); | |
2540 | return ret; | |
2541 | } | |
2542 | ||
3296f71c DT |
2543 | static int alps_set_protocol(struct psmouse *psmouse, |
2544 | struct alps_data *priv, | |
2545 | const struct alps_protocol_info *protocol) | |
25bded7c | 2546 | { |
3296f71c DT |
2547 | psmouse->private = priv; |
2548 | ||
2549 | setup_timer(&priv->timer, alps_flush_packet, (unsigned long)psmouse); | |
2550 | ||
2551 | priv->proto_version = protocol->version; | |
2552 | priv->byte0 = protocol->byte0; | |
2553 | priv->mask0 = protocol->mask0; | |
2554 | priv->flags = protocol->flags; | |
073e570d HG |
2555 | if (dmi_name_in_vendors("Dell")) |
2556 | priv->flags |= ALPS_DELL; | |
f673ceb1 | 2557 | |
7a9f73e7 KC |
2558 | priv->x_max = 2000; |
2559 | priv->y_max = 1400; | |
2560 | priv->x_bits = 15; | |
2561 | priv->y_bits = 11; | |
2562 | ||
99df65e7 | 2563 | switch (priv->proto_version) { |
25bded7c SF |
2564 | case ALPS_PROTO_V1: |
2565 | case ALPS_PROTO_V2: | |
24af5cb9 KC |
2566 | priv->hw_init = alps_hw_init_v1_v2; |
2567 | priv->process_packet = alps_process_packet_v1_v2; | |
2568 | priv->set_abs_params = alps_set_abs_params_st; | |
95f75e91 YT |
2569 | priv->x_max = 1023; |
2570 | priv->y_max = 767; | |
25bded7c | 2571 | break; |
fb2dd7a6 | 2572 | |
25bded7c | 2573 | case ALPS_PROTO_V3: |
24af5cb9 KC |
2574 | priv->hw_init = alps_hw_init_v3; |
2575 | priv->process_packet = alps_process_packet_v3; | |
688ea364 | 2576 | priv->set_abs_params = alps_set_abs_params_semi_mt; |
f85e5001 | 2577 | priv->decode_fields = alps_decode_pinnacle; |
50e8b216 KC |
2578 | priv->nibble_commands = alps_v3_nibble_commands; |
2579 | priv->addr_command = PSMOUSE_CMD_RESET_WRAP; | |
25bded7c | 2580 | break; |
fb2dd7a6 DT |
2581 | |
2582 | case ALPS_PROTO_V3_RUSHMORE: | |
2583 | priv->hw_init = alps_hw_init_rushmore_v3; | |
2584 | priv->process_packet = alps_process_packet_v3; | |
688ea364 | 2585 | priv->set_abs_params = alps_set_abs_params_semi_mt; |
fb2dd7a6 DT |
2586 | priv->decode_fields = alps_decode_rushmore; |
2587 | priv->nibble_commands = alps_v3_nibble_commands; | |
2588 | priv->addr_command = PSMOUSE_CMD_RESET_WRAP; | |
2589 | priv->x_bits = 16; | |
2590 | priv->y_bits = 12; | |
3296f71c DT |
2591 | |
2592 | if (alps_probe_trackstick_v3(psmouse, | |
2593 | ALPS_REG_BASE_RUSHMORE) < 0) | |
2594 | priv->flags &= ~ALPS_DUALPOINT; | |
2595 | ||
fb2dd7a6 DT |
2596 | break; |
2597 | ||
25bded7c | 2598 | case ALPS_PROTO_V4: |
24af5cb9 KC |
2599 | priv->hw_init = alps_hw_init_v4; |
2600 | priv->process_packet = alps_process_packet_v4; | |
688ea364 | 2601 | priv->set_abs_params = alps_set_abs_params_semi_mt; |
50e8b216 KC |
2602 | priv->nibble_commands = alps_v4_nibble_commands; |
2603 | priv->addr_command = PSMOUSE_CMD_DISABLE; | |
25bded7c | 2604 | break; |
3296f71c | 2605 | |
75af9e56 DT |
2606 | case ALPS_PROTO_V5: |
2607 | priv->hw_init = alps_hw_init_dolphin_v1; | |
ee65d4b3 | 2608 | priv->process_packet = alps_process_touchpad_packet_v3_v5; |
75af9e56 | 2609 | priv->decode_fields = alps_decode_dolphin; |
688ea364 | 2610 | priv->set_abs_params = alps_set_abs_params_semi_mt; |
75af9e56 DT |
2611 | priv->nibble_commands = alps_v3_nibble_commands; |
2612 | priv->addr_command = PSMOUSE_CMD_RESET_WRAP; | |
75af9e56 DT |
2613 | priv->x_bits = 23; |
2614 | priv->y_bits = 12; | |
c164c147 DT |
2615 | |
2616 | if (alps_dolphin_get_device_area(psmouse, priv)) | |
2617 | return -EIO; | |
2618 | ||
75af9e56 | 2619 | break; |
3296f71c | 2620 | |
95f75e91 YT |
2621 | case ALPS_PROTO_V6: |
2622 | priv->hw_init = alps_hw_init_v6; | |
2623 | priv->process_packet = alps_process_packet_v6; | |
2624 | priv->set_abs_params = alps_set_abs_params_st; | |
2625 | priv->nibble_commands = alps_v6_nibble_commands; | |
2626 | priv->x_max = 2047; | |
2627 | priv->y_max = 1535; | |
2628 | break; | |
3296f71c | 2629 | |
3808843c YT |
2630 | case ALPS_PROTO_V7: |
2631 | priv->hw_init = alps_hw_init_v7; | |
2632 | priv->process_packet = alps_process_packet_v7; | |
2633 | priv->decode_fields = alps_decode_packet_v7; | |
8eccd393 | 2634 | priv->set_abs_params = alps_set_abs_params_v7; |
3808843c YT |
2635 | priv->nibble_commands = alps_v3_nibble_commands; |
2636 | priv->addr_command = PSMOUSE_CMD_RESET_WRAP; | |
c164c147 DT |
2637 | priv->x_max = 0xfff; |
2638 | priv->y_max = 0x7ff; | |
3808843c YT |
2639 | |
2640 | if (priv->fw_ver[1] != 0xba) | |
2641 | priv->flags |= ALPS_BUTTONPAD; | |
3296f71c | 2642 | |
3808843c | 2643 | break; |
3db5b9f7 MO |
2644 | |
2645 | case ALPS_PROTO_V8: | |
2646 | priv->hw_init = alps_hw_init_ss4_v2; | |
2647 | priv->process_packet = alps_process_packet_ss4_v2; | |
2648 | priv->decode_fields = alps_decode_ss4_v2; | |
2649 | priv->set_abs_params = alps_set_abs_params_ss4_v2; | |
2650 | priv->nibble_commands = alps_v3_nibble_commands; | |
2651 | priv->addr_command = PSMOUSE_CMD_RESET_WRAP; | |
2652 | ||
2653 | if (alps_set_defaults_ss4_v2(psmouse, priv)) | |
2654 | return -EIO; | |
2655 | ||
2656 | break; | |
25bded7c | 2657 | } |
3296f71c DT |
2658 | |
2659 | return 0; | |
25bded7c SF |
2660 | } |
2661 | ||
3296f71c DT |
2662 | static const struct alps_protocol_info *alps_match_table(unsigned char *e7, |
2663 | unsigned char *ec) | |
2e992cc0 | 2664 | { |
b5d6b851 | 2665 | const struct alps_model_info *model; |
2e992cc0 KC |
2666 | int i; |
2667 | ||
b5d6b851 KC |
2668 | for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) { |
2669 | model = &alps_model_data[i]; | |
2670 | ||
2671 | if (!memcmp(e7, model->signature, sizeof(model->signature)) && | |
2672 | (!model->command_mode_resp || | |
2673 | model->command_mode_resp == ec[2])) { | |
2674 | ||
3296f71c | 2675 | return &model->protocol_info; |
b5d6b851 KC |
2676 | } |
2677 | } | |
2678 | ||
3296f71c | 2679 | return NULL; |
b5d6b851 KC |
2680 | } |
2681 | ||
2682 | static int alps_identify(struct psmouse *psmouse, struct alps_data *priv) | |
2683 | { | |
3296f71c | 2684 | const struct alps_protocol_info *protocol; |
b5d6b851 | 2685 | unsigned char e6[4], e7[4], ec[4]; |
a09221e8 | 2686 | int error; |
b5d6b851 | 2687 | |
2e992cc0 KC |
2688 | /* |
2689 | * First try "E6 report". | |
2690 | * ALPS should return 0,0,10 or 0,0,100 if no buttons are pressed. | |
2691 | * The bits 0-2 of the first byte will be 1s if some buttons are | |
2692 | * pressed. | |
2693 | */ | |
b5d6b851 KC |
2694 | if (alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES, |
2695 | PSMOUSE_CMD_SETSCALE11, e6)) | |
2696 | return -EIO; | |
2e992cc0 | 2697 | |
b5d6b851 KC |
2698 | if ((e6[0] & 0xf8) != 0 || e6[1] != 0 || (e6[2] != 10 && e6[2] != 100)) |
2699 | return -EINVAL; | |
2e992cc0 KC |
2700 | |
2701 | /* | |
b5d6b851 KC |
2702 | * Now get the "E7" and "EC" reports. These will uniquely identify |
2703 | * most ALPS touchpads. | |
2e992cc0 | 2704 | */ |
b5d6b851 KC |
2705 | if (alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES, |
2706 | PSMOUSE_CMD_SETSCALE21, e7) || | |
2707 | alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES, | |
2708 | PSMOUSE_CMD_RESET_WRAP, ec) || | |
2709 | alps_exit_command_mode(psmouse)) | |
2710 | return -EIO; | |
2e992cc0 | 2711 | |
3296f71c DT |
2712 | protocol = alps_match_table(e7, ec); |
2713 | if (!protocol) { | |
2714 | if (e7[0] == 0x73 && e7[1] == 0x03 && e7[2] == 0x50 && | |
2715 | ec[0] == 0x73 && (ec[1] == 0x01 || ec[1] == 0x02)) { | |
2716 | protocol = &alps_v5_protocol_data; | |
2717 | } else if (ec[0] == 0x88 && | |
2718 | ((ec[1] & 0xf0) == 0xb0 || (ec[1] & 0xf0) == 0xc0)) { | |
2719 | protocol = &alps_v7_protocol_data; | |
2720 | } else if (ec[0] == 0x88 && ec[1] == 0x08) { | |
2721 | protocol = &alps_v3_rushmore_data; | |
2722 | } else if (ec[0] == 0x88 && ec[1] == 0x07 && | |
2723 | ec[2] >= 0x90 && ec[2] <= 0x9d) { | |
2724 | protocol = &alps_v3_protocol_data; | |
3db5b9f7 MO |
2725 | } else if (e7[0] == 0x73 && e7[1] == 0x03 && |
2726 | e7[2] == 0x14 && ec[1] == 0x02) { | |
2727 | protocol = &alps_v8_protocol_data; | |
3296f71c DT |
2728 | } else { |
2729 | psmouse_dbg(psmouse, | |
2730 | "Likely not an ALPS touchpad: E7=%3ph, EC=%3ph\n", e7, ec); | |
2731 | return -EINVAL; | |
2732 | } | |
f673ceb1 | 2733 | } |
2e992cc0 | 2734 | |
a09221e8 DT |
2735 | if (priv) { |
2736 | /* Save the Firmware version */ | |
2737 | memcpy(priv->fw_ver, ec, 3); | |
2738 | error = alps_set_protocol(psmouse, priv, protocol); | |
2739 | if (error) | |
2740 | return error; | |
2741 | } | |
2e992cc0 | 2742 | |
a09221e8 | 2743 | return 0; |
2e992cc0 KC |
2744 | } |
2745 | ||
1e0c5b12 DT |
2746 | static int alps_reconnect(struct psmouse *psmouse) |
2747 | { | |
b5d6b851 | 2748 | struct alps_data *priv = psmouse->private; |
71bb21b6 | 2749 | |
1e0c5b12 DT |
2750 | psmouse_reset(psmouse); |
2751 | ||
b5d6b851 | 2752 | if (alps_identify(psmouse, priv) < 0) |
1e0c5b12 DT |
2753 | return -1; |
2754 | ||
24af5cb9 | 2755 | return priv->hw_init(psmouse); |
1da177e4 LT |
2756 | } |
2757 | ||
2758 | static void alps_disconnect(struct psmouse *psmouse) | |
2759 | { | |
2760 | struct alps_data *priv = psmouse->private; | |
2e5b636b | 2761 | |
1da177e4 | 2762 | psmouse_reset(psmouse); |
1d9f2626 | 2763 | del_timer_sync(&priv->timer); |
04aae283 PR |
2764 | if (priv->dev2) |
2765 | input_unregister_device(priv->dev2); | |
2766 | if (!IS_ERR_OR_NULL(priv->dev3)) | |
2767 | input_unregister_device(priv->dev3); | |
1da177e4 LT |
2768 | kfree(priv); |
2769 | } | |
2770 | ||
24af5cb9 KC |
2771 | static void alps_set_abs_params_st(struct alps_data *priv, |
2772 | struct input_dev *dev1) | |
2773 | { | |
95f75e91 YT |
2774 | input_set_abs_params(dev1, ABS_X, 0, priv->x_max, 0, 0); |
2775 | input_set_abs_params(dev1, ABS_Y, 0, priv->y_max, 0, 0); | |
8eccd393 | 2776 | input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0); |
24af5cb9 KC |
2777 | } |
2778 | ||
8eccd393 MO |
2779 | static void alps_set_abs_params_mt_common(struct alps_data *priv, |
2780 | struct input_dev *dev1) | |
24af5cb9 | 2781 | { |
7a9f73e7 KC |
2782 | input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, priv->x_max, 0, 0); |
2783 | input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, priv->y_max, 0, 0); | |
24af5cb9 | 2784 | |
f3f33c67 HG |
2785 | input_abs_set_res(dev1, ABS_MT_POSITION_X, priv->x_res); |
2786 | input_abs_set_res(dev1, ABS_MT_POSITION_Y, priv->y_res); | |
2787 | ||
24af5cb9 KC |
2788 | set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit); |
2789 | set_bit(BTN_TOOL_QUADTAP, dev1->keybit); | |
8eccd393 MO |
2790 | } |
2791 | ||
688ea364 HG |
2792 | static void alps_set_abs_params_semi_mt(struct alps_data *priv, |
2793 | struct input_dev *dev1) | |
8eccd393 MO |
2794 | { |
2795 | alps_set_abs_params_mt_common(priv, dev1); | |
2796 | input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0); | |
2797 | ||
2798 | input_mt_init_slots(dev1, MAX_TOUCHES, | |
2799 | INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED | | |
1662c033 | 2800 | INPUT_MT_SEMI_MT); |
8eccd393 MO |
2801 | } |
2802 | ||
2803 | static void alps_set_abs_params_v7(struct alps_data *priv, | |
2804 | struct input_dev *dev1) | |
2805 | { | |
2806 | alps_set_abs_params_mt_common(priv, dev1); | |
8d289842 | 2807 | set_bit(BTN_TOOL_QUINTTAP, dev1->keybit); |
3808843c | 2808 | |
3db5b9f7 MO |
2809 | input_mt_init_slots(dev1, MAX_TOUCHES, |
2810 | INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED | | |
2811 | INPUT_MT_TRACK); | |
2812 | ||
2813 | set_bit(BTN_TOOL_QUINTTAP, dev1->keybit); | |
2814 | } | |
2815 | ||
2816 | static void alps_set_abs_params_ss4_v2(struct alps_data *priv, | |
2817 | struct input_dev *dev1) | |
2818 | { | |
2819 | alps_set_abs_params_mt_common(priv, dev1); | |
2820 | input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0); | |
2821 | set_bit(BTN_TOOL_QUINTTAP, dev1->keybit); | |
3808843c | 2822 | |
8eccd393 MO |
2823 | input_mt_init_slots(dev1, MAX_TOUCHES, |
2824 | INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED | | |
2825 | INPUT_MT_TRACK); | |
24af5cb9 KC |
2826 | } |
2827 | ||
1da177e4 LT |
2828 | int alps_init(struct psmouse *psmouse) |
2829 | { | |
a09221e8 | 2830 | struct alps_data *priv = psmouse->private; |
04aae283 | 2831 | struct input_dev *dev1 = psmouse->dev; |
a09221e8 | 2832 | int error; |
1da177e4 | 2833 | |
a09221e8 DT |
2834 | error = priv->hw_init(psmouse); |
2835 | if (error) | |
1da177e4 LT |
2836 | goto init_fail; |
2837 | ||
7105d2ea DT |
2838 | /* |
2839 | * Undo part of setup done for us by psmouse core since touchpad | |
2840 | * is not a relative device. | |
2841 | */ | |
2842 | __clear_bit(EV_REL, dev1->evbit); | |
2843 | __clear_bit(REL_X, dev1->relbit); | |
2844 | __clear_bit(REL_Y, dev1->relbit); | |
2845 | ||
2846 | /* | |
2847 | * Now set up our capabilities. | |
2848 | */ | |
7b19ada2 JS |
2849 | dev1->evbit[BIT_WORD(EV_KEY)] |= BIT_MASK(EV_KEY); |
2850 | dev1->keybit[BIT_WORD(BTN_TOUCH)] |= BIT_MASK(BTN_TOUCH); | |
2851 | dev1->keybit[BIT_WORD(BTN_TOOL_FINGER)] |= BIT_MASK(BTN_TOOL_FINGER); | |
71bb21b6 ML |
2852 | dev1->keybit[BIT_WORD(BTN_LEFT)] |= |
2853 | BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT); | |
1da177e4 | 2854 | |
7b19ada2 | 2855 | dev1->evbit[BIT_WORD(EV_ABS)] |= BIT_MASK(EV_ABS); |
25bded7c | 2856 | |
24af5cb9 | 2857 | priv->set_abs_params(priv, dev1); |
1da177e4 | 2858 | |
99df65e7 | 2859 | if (priv->flags & ALPS_WHEEL) { |
7b19ada2 JS |
2860 | dev1->evbit[BIT_WORD(EV_REL)] |= BIT_MASK(EV_REL); |
2861 | dev1->relbit[BIT_WORD(REL_WHEEL)] |= BIT_MASK(REL_WHEEL); | |
1da177e4 LT |
2862 | } |
2863 | ||
99df65e7 | 2864 | if (priv->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) { |
7b19ada2 JS |
2865 | dev1->keybit[BIT_WORD(BTN_FORWARD)] |= BIT_MASK(BTN_FORWARD); |
2866 | dev1->keybit[BIT_WORD(BTN_BACK)] |= BIT_MASK(BTN_BACK); | |
1da177e4 LT |
2867 | } |
2868 | ||
99df65e7 | 2869 | if (priv->flags & ALPS_FOUR_BUTTONS) { |
71bb21b6 ML |
2870 | dev1->keybit[BIT_WORD(BTN_0)] |= BIT_MASK(BTN_0); |
2871 | dev1->keybit[BIT_WORD(BTN_1)] |= BIT_MASK(BTN_1); | |
2872 | dev1->keybit[BIT_WORD(BTN_2)] |= BIT_MASK(BTN_2); | |
2873 | dev1->keybit[BIT_WORD(BTN_3)] |= BIT_MASK(BTN_3); | |
3808843c YT |
2874 | } else if (priv->flags & ALPS_BUTTONPAD) { |
2875 | set_bit(INPUT_PROP_BUTTONPAD, dev1->propbit); | |
2876 | clear_bit(BTN_RIGHT, dev1->keybit); | |
71bb21b6 ML |
2877 | } else { |
2878 | dev1->keybit[BIT_WORD(BTN_MIDDLE)] |= BIT_MASK(BTN_MIDDLE); | |
2879 | } | |
2880 | ||
dfba8600 | 2881 | if (priv->flags & ALPS_DUALPOINT) { |
04aae283 PR |
2882 | struct input_dev *dev2; |
2883 | ||
2884 | dev2 = input_allocate_device(); | |
2885 | if (!dev2) { | |
2886 | psmouse_err(psmouse, | |
2887 | "failed to allocate trackstick device\n"); | |
2888 | error = -ENOMEM; | |
2889 | goto init_fail; | |
2890 | } | |
2891 | ||
2892 | snprintf(priv->phys2, sizeof(priv->phys2), "%s/input1", | |
2893 | psmouse->ps2dev.serio->phys); | |
2894 | dev2->phys = priv->phys2; | |
2895 | ||
dfba8600 PR |
2896 | /* |
2897 | * format of input device name is: "protocol vendor name" | |
2898 | * see function psmouse_switch_protocol() in psmouse-base.c | |
2899 | */ | |
2900 | dev2->name = "AlpsPS/2 ALPS DualPoint Stick"; | |
04aae283 PR |
2901 | |
2902 | dev2->id.bustype = BUS_I8042; | |
2903 | dev2->id.vendor = 0x0002; | |
dfba8600 PR |
2904 | dev2->id.product = PSMOUSE_ALPS; |
2905 | dev2->id.version = priv->proto_version; | |
04aae283 | 2906 | dev2->dev.parent = &psmouse->ps2dev.serio->dev; |
1da177e4 | 2907 | |
04aae283 PR |
2908 | input_set_capability(dev2, EV_REL, REL_X); |
2909 | input_set_capability(dev2, EV_REL, REL_Y); | |
2910 | input_set_capability(dev2, EV_KEY, BTN_LEFT); | |
2911 | input_set_capability(dev2, EV_KEY, BTN_RIGHT); | |
2912 | input_set_capability(dev2, EV_KEY, BTN_MIDDLE); | |
1da177e4 | 2913 | |
04aae283 | 2914 | __set_bit(INPUT_PROP_POINTER, dev2->propbit); |
7611392f HG |
2915 | __set_bit(INPUT_PROP_POINTING_STICK, dev2->propbit); |
2916 | ||
04aae283 PR |
2917 | error = input_register_device(dev2); |
2918 | if (error) { | |
2919 | psmouse_err(psmouse, | |
2920 | "failed to register trackstick device: %d\n", | |
2921 | error); | |
2922 | input_free_device(dev2); | |
2923 | goto init_fail; | |
2924 | } | |
2925 | ||
2926 | priv->dev2 = dev2; | |
2927 | } | |
2928 | ||
2929 | priv->psmouse = psmouse; | |
2930 | ||
2931 | INIT_DELAYED_WORK(&priv->dev3_register_work, | |
2932 | alps_register_bare_ps2_mouse); | |
1da177e4 LT |
2933 | |
2934 | psmouse->protocol_handler = alps_process_byte; | |
f0d5c6f4 | 2935 | psmouse->poll = alps_poll; |
1da177e4 LT |
2936 | psmouse->disconnect = alps_disconnect; |
2937 | psmouse->reconnect = alps_reconnect; | |
99df65e7 | 2938 | psmouse->pktsize = priv->proto_version == ALPS_PROTO_V4 ? 8 : 6; |
1da177e4 | 2939 | |
f0d5c6f4 DT |
2940 | /* We are having trouble resyncing ALPS touchpads so disable it for now */ |
2941 | psmouse->resync_time = 0; | |
2942 | ||
9d720b34 PR |
2943 | /* Allow 2 invalid packets without resetting device */ |
2944 | psmouse->resetafter = psmouse->pktsize * 2; | |
2945 | ||
1da177e4 LT |
2946 | return 0; |
2947 | ||
2948 | init_fail: | |
f42649e8 | 2949 | psmouse_reset(psmouse); |
a09221e8 DT |
2950 | /* |
2951 | * Even though we did not allocate psmouse->private we do free | |
2952 | * it here. | |
2953 | */ | |
2954 | kfree(psmouse->private); | |
1e0c5b12 | 2955 | psmouse->private = NULL; |
a09221e8 | 2956 | return error; |
1da177e4 LT |
2957 | } |
2958 | ||
b7802c5c | 2959 | int alps_detect(struct psmouse *psmouse, bool set_properties) |
1da177e4 | 2960 | { |
a09221e8 DT |
2961 | struct alps_data *priv; |
2962 | int error; | |
1da177e4 | 2963 | |
a09221e8 DT |
2964 | error = alps_identify(psmouse, NULL); |
2965 | if (error) | |
2966 | return error; | |
2967 | ||
2968 | /* | |
2969 | * Reset the device to make sure it is fully operational: | |
2970 | * on some laptops, like certain Dell Latitudes, we may | |
2971 | * fail to properly detect presence of trackstick if device | |
2972 | * has not been reset. | |
2973 | */ | |
2974 | psmouse_reset(psmouse); | |
2975 | ||
2976 | priv = kzalloc(sizeof(struct alps_data), GFP_KERNEL); | |
2977 | if (!priv) | |
2978 | return -ENOMEM; | |
2979 | ||
2980 | error = alps_identify(psmouse, priv); | |
93050db2 DT |
2981 | if (error) { |
2982 | kfree(priv); | |
a09221e8 | 2983 | return error; |
93050db2 | 2984 | } |
1da177e4 LT |
2985 | |
2986 | if (set_properties) { | |
2987 | psmouse->vendor = "ALPS"; | |
a09221e8 | 2988 | psmouse->name = priv->flags & ALPS_DUALPOINT ? |
968ac842 | 2989 | "DualPoint TouchPad" : "GlidePoint"; |
a09221e8 DT |
2990 | psmouse->model = priv->proto_version; |
2991 | } else { | |
2992 | /* | |
2993 | * Destroy alps_data structure we allocated earlier since | |
2994 | * this was just a "trial run". Otherwise we'll keep it | |
2995 | * to be used by alps_init() which has to be called if | |
2996 | * we succeed and set_properties is true. | |
2997 | */ | |
2998 | kfree(priv); | |
2999 | psmouse->private = NULL; | |
1da177e4 | 3000 | } |
a09221e8 | 3001 | |
1da177e4 LT |
3002 | return 0; |
3003 | } | |
3004 |