[mirror_ubuntu-focal-kernel.git] / drivers / input / touchscreen / Kconfig

#
# Touchscreen driver configuration
#
menuconfig INPUT_TOUCHSCREEN
	bool "Touchscreens"
	help
	  Say Y here, and a list of supported touchscreens will be displayed.
	  This option doesn't affect the kernel.

	  If unsure, say Y.

if INPUT_TOUCHSCREEN

config TOUCHSCREEN_ADS7846
	tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
	depends on SPI_MASTER
	depends on HWMON = n || HWMON
	help
	  Say Y here if you have a touchscreen interface using the
	  ADS7846/TSC2046 or ADS7843 controller, and your board-specific
	  setup code includes that in its table of SPI devices.

	  If HWMON is selected, and the driver is told the reference voltage
	  on your board, you will also get hwmon interfaces for the voltage
	  (and on ads7846/tsc2046, temperature) sensors of this chip.

	  If unsure, say N (but it's safe to say "Y").

	  To compile this driver as a module, choose M here: the
	  module will be called ads7846.

config TOUCHSCREEN_BITSY
	tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
	depends on SA1100_BITSY
	select SERIO
	help
	  Say Y here if you have the h3600 (Bitsy) touchscreen.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called h3600_ts_input.

config TOUCHSCREEN_CORGI
	tristate "SharpSL (Corgi and Spitz series) touchscreen driver"
	depends on PXA_SHARPSL
	default y
	help
	  Say Y here to enable the driver for the touchscreen on the
	  Sharp SL-C7xx and SL-Cxx00 series of PDAs.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called corgi_ts.

config TOUCHSCREEN_FUJITSU
	tristate "Fujitsu serial touchscreen"
	select SERIO
	help
	  Say Y here if you have the Fujitsu touchscreen (such as one
	  installed in Lifebook P series laptop) connected to your
	  system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called fujitsu-ts.

config TOUCHSCREEN_GUNZE
	tristate "Gunze AHL-51S touchscreen"
	select SERIO
	help
	  Say Y here if you have the Gunze AHL-51 touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called gunze.

config TOUCHSCREEN_ELO
	tristate "Elo serial touchscreens"
	select SERIO
	help
	  Say Y here if you have an Elo serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called elo.

config TOUCHSCREEN_MTOUCH
	tristate "MicroTouch serial touchscreens"
	select SERIO
	help
	  Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called mtouch.

config TOUCHSCREEN_MK712
	tristate "ICS MicroClock MK712 touchscreen"
	help
	  Say Y here if you have the ICS MicroClock MK712 touchscreen
	  controller chip in your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called mk712.

config TOUCHSCREEN_HP600
	tristate "HP Jornada 6xx touchscreen"
	depends on SH_HP6XX && SH_ADC
	help
	  Say Y here if you have a HP Jornada 620/660/680/690 and want to
          support the built-in touchscreen.

	  To compile this driver as a module, choose M here: the
	  module will be called hp680_ts_input.

config TOUCHSCREEN_HP7XX
	tristate "HP Jornada 7xx touchscreen"
	depends on SA1100_JORNADA720_SSP
	help
	  Say Y here if you have a HP Jornada 710/720/728 and want
	  to support the built-in touchscreen.

	  To compile this driver as a module, choose M here: the
	  module will be called jornada720_ts.

config TOUCHSCREEN_PENMOUNT
	tristate "Penmount serial touchscreen"
	select SERIO
	help
	  Say Y here if you have a Penmount serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called penmount.

config TOUCHSCREEN_TOUCHRIGHT
	tristate "Touchright serial touchscreen"
	select SERIO
	help
	  Say Y here if you have a Touchright serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called touchright.

config TOUCHSCREEN_TOUCHWIN
	tristate "Touchwin serial touchscreen"
	select SERIO
	help
	  Say Y here if you have a Touchwin serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called touchwin.

config TOUCHSCREEN_UCB1400
	tristate "Philips UCB1400 touchscreen"
	select AC97_BUS
	help
	  This enables support for the Philips UCB1400 touchscreen interface.
	  The UCB1400 is an AC97 audio codec.  The touchscreen interface
	  will be initialized only after the ALSA subsystem has been
	  brought up and the UCB1400 detected.  You therefore have to
	  configure ALSA support as well (either built-in or modular,
	  independently of whether this driver is itself built-in or
	  modular) for this driver to work.

	  To compile this driver as a module, choose M here: the
	  module will be called ucb1400_ts.

config TOUCHSCREEN_USB_COMPOSITE
	tristate "USB Touchscreen Driver"
	depends on USB_ARCH_HAS_HCD
	select USB
	help
	  USB Touchscreen driver for:
	  - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
	  - PanJit TouchSet USB
	  - 3M MicroTouch USB (EX II series)
	  - ITM
	  - some other eTurboTouch
	  - Gunze AHL61
	  - DMC TSC-10/25
	  - IRTOUCHSYSTEMS/UNITOP
	  - IdealTEK URTC1000
	  - GoTop Super_Q2/GogoPen/PenPower tablets

	  Have a look at <http://linux.chapter7.ch/touchkit/> for
	  a usage description and the required user-space stuff.

	  To compile this driver as a module, choose M here: the
	  module will be called usbtouchscreen.

config TOUCHSCREEN_USB_EGALAX
	default y
	bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_PANJIT
	default y
	bool "PanJit device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_3M
	default y
	bool "3M/Microtouch EX II series device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_ITM
	default y
	bool "ITM device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_ETURBO
	default y
	bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_GUNZE
	default y
	bool "Gunze AHL61 device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_DMC_TSC10
	default y
	bool "DMC TSC-10/25 device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_IRTOUCH
	default y
	bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_IDEALTEK
	default y
	bool "IdealTEK URTC1000 device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_GENERAL_TOUCH
	default y
	bool "GeneralTouch Touchscreen device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_GOTOP
	default y
	bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

endif
Commit	Line	Data
1da177e4	1	#
d05e84e6	2	# Touchscreen driver configuration
1da177e4 LT	3	#
	4	menuconfig INPUT_TOUCHSCREEN
	5	bool "Touchscreens"
	6	help
	7	Say Y here, and a list of supported touchscreens will be displayed.
	8	This option doesn't affect the kernel.
	9
	10	If unsure, say Y.
	11
	12	if INPUT_TOUCHSCREEN
	13
ffa458c1	14	config TOUCHSCREEN_ADS7846
bff0de5f	15	tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
ffa458c1	16	depends on SPI_MASTER
2c8dc071	17	depends on HWMON = n \|\| HWMON
ffa458c1 DB	18	help
ffa458c1 DB	19	Say Y here if you have a touchscreen interface using the
bff0de5f DB	20	ADS7846/TSC2046 or ADS7843 controller, and your board-specific
bff0de5f DB	21	setup code includes that in its table of SPI devices.
ffa458c1	22
2c8dc071 DB	23	If HWMON is selected, and the driver is told the reference voltage
2c8dc071 DB	24	on your board, you will also get hwmon interfaces for the voltage
bff0de5f	25	(and on ads7846/tsc2046, temperature) sensors of this chip.
2c8dc071	26
ffa458c1 DB	27	If unsure, say N (but it's safe to say "Y").
	28
	29	To compile this driver as a module, choose M here: the
	30	module will be called ads7846.
	31
1da177e4 LT	32	config TOUCHSCREEN_BITSY
	33	tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
	34	depends on SA1100_BITSY
	35	select SERIO
	36	help
	37	Say Y here if you have the h3600 (Bitsy) touchscreen.
	38
	39	If unsure, say N.
	40
	41	To compile this driver as a module, choose M here: the
	42	module will be called h3600_ts_input.
	43
	44	config TOUCHSCREEN_CORGI
513b6e1a	45	tristate "SharpSL (Corgi and Spitz series) touchscreen driver"
1da177e4	46	depends on PXA_SHARPSL
d05e84e6	47	default y
1da177e4	48	help
d05e84e6	49	Say Y here to enable the driver for the touchscreen on the
513b6e1a	50	Sharp SL-C7xx and SL-Cxx00 series of PDAs.
1da177e4 LT	51
	52	If unsure, say N.
	53
	54	To compile this driver as a module, choose M here: the
513b6e1a	55	module will be called corgi_ts.
1da177e4	56
85f202d5 DT	57	config TOUCHSCREEN_FUJITSU
	58	tristate "Fujitsu serial touchscreen"
	59	select SERIO
	60	help
	61	Say Y here if you have the Fujitsu touchscreen (such as one
	62	installed in Lifebook P series laptop) connected to your
	63	system.
	64
	65	If unsure, say N.
	66
	67	To compile this driver as a module, choose M here: the
	68	module will be called fujitsu-ts.
	69
1da177e4 LT	70	config TOUCHSCREEN_GUNZE
	71	tristate "Gunze AHL-51S touchscreen"
	72	select SERIO
	73	help
	74	Say Y here if you have the Gunze AHL-51 touchscreen connected to
	75	your system.
	76
	77	If unsure, say N.
	78
	79	To compile this driver as a module, choose M here: the
	80	module will be called gunze.
	81
	82	config TOUCHSCREEN_ELO
	83	tristate "Elo serial touchscreens"
	84	select SERIO
	85	help
	86	Say Y here if you have an Elo serial touchscreen connected to
	87	your system.
	88
	89	If unsure, say N.
	90
	91	To compile this driver as a module, choose M here: the
153ab429	92	module will be called elo.
1da177e4 LT	93
	94	config TOUCHSCREEN_MTOUCH
	95	tristate "MicroTouch serial touchscreens"
	96	select SERIO
	97	help
	98	Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
	99	your system.
	100
	101	If unsure, say N.
	102
	103	To compile this driver as a module, choose M here: the
	104	module will be called mtouch.
	105
	106	config TOUCHSCREEN_MK712
	107	tristate "ICS MicroClock MK712 touchscreen"
	108	help
	109	Say Y here if you have the ICS MicroClock MK712 touchscreen
	110	controller chip in your system.
	111
	112	If unsure, say N.
	113
	114	To compile this driver as a module, choose M here: the
	115	module will be called mk712.
	116
	117	config TOUCHSCREEN_HP600
4ff891eb	118	tristate "HP Jornada 6xx touchscreen"
0025835c	119	depends on SH_HP6XX && SH_ADC
1da177e4	120	help
4ff891eb	121	Say Y here if you have a HP Jornada 620/660/680/690 and want to
1da177e4 LT	122	support the built-in touchscreen.
1da177e4 LT	123
1da177e4 LT	124	To compile this driver as a module, choose M here: the
	125	module will be called hp680_ts_input.
	126
5637f02a	127	config TOUCHSCREEN_HP7XX
4ff891eb	128	tristate "HP Jornada 7xx touchscreen"
5637f02a KE	129	depends on SA1100_JORNADA720_SSP
	130	help
	131	Say Y here if you have a HP Jornada 710/720/728 and want
	132	to support the built-in touchscreen.
	133
	134	To compile this driver as a module, choose M here: the
	135	module will be called jornada720_ts.
	136
ee479999 RK	137	config TOUCHSCREEN_PENMOUNT
	138	tristate "Penmount serial touchscreen"
	139	select SERIO
	140	help
	141	Say Y here if you have a Penmount serial touchscreen connected to
	142	your system.
	143
	144	If unsure, say N.
	145
	146	To compile this driver as a module, choose M here: the
	147	module will be called penmount.
	148
4003dff4 RK	149	config TOUCHSCREEN_TOUCHRIGHT
	150	tristate "Touchright serial touchscreen"
	151	select SERIO
	152	help
	153	Say Y here if you have a Touchright serial touchscreen connected to
	154	your system.
	155
	156	If unsure, say N.
	157
	158	To compile this driver as a module, choose M here: the
	159	module will be called touchright.
	160
11ea3173 RK	161	config TOUCHSCREEN_TOUCHWIN
	162	tristate "Touchwin serial touchscreen"
	163	select SERIO
	164	help
	165	Say Y here if you have a Touchwin serial touchscreen connected to
	166	your system.
	167
	168	If unsure, say N.
	169
	170	To compile this driver as a module, choose M here: the
	171	module will be called touchwin.
	172
f40219bf NP	173	config TOUCHSCREEN_UCB1400
f40219bf NP	174	tristate "Philips UCB1400 touchscreen"
e1036502	175	select AC97_BUS
f40219bf NP	176	help
	177	This enables support for the Philips UCB1400 touchscreen interface.
	178	The UCB1400 is an AC97 audio codec. The touchscreen interface
	179	will be initialized only after the ALSA subsystem has been
	180	brought up and the UCB1400 detected. You therefore have to
	181	configure ALSA support as well (either built-in or modular,
	182	independently of whether this driver is itself built-in or
	183	modular) for this driver to work.
	184
	185	To compile this driver as a module, choose M here: the
	186	module will be called ucb1400_ts.
	187
d05e84e6 DT	188	config TOUCHSCREEN_USB_COMPOSITE
d05e84e6 DT	189	tristate "USB Touchscreen Driver"
7a86edef	190	depends on USB_ARCH_HAS_HCD
d05e84e6 DT	191	select USB
	192	help
	193	USB Touchscreen driver for:
	194	- eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
	195	- PanJit TouchSet USB
	196	- 3M MicroTouch USB (EX II series)
	197	- ITM
	198	- some other eTurboTouch
	199	- Gunze AHL61
	200	- DMC TSC-10/25
df561fcd	201	- IRTOUCHSYSTEMS/UNITOP
a14a8401	202	- IdealTEK URTC1000
14e40206	203	- GoTop Super_Q2/GogoPen/PenPower tablets
d05e84e6 DT	204
	205	Have a look at <http://linux.chapter7.ch/touchkit/> for
	206	a usage description and the required user-space stuff.
	207
	208	To compile this driver as a module, choose M here: the
	209	module will be called usbtouchscreen.
	210
	211	config TOUCHSCREEN_USB_EGALAX
	212	default y
	213	bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
	214	depends on TOUCHSCREEN_USB_COMPOSITE
	215
	216	config TOUCHSCREEN_USB_PANJIT
	217	default y
	218	bool "PanJit device support" if EMBEDDED
	219	depends on TOUCHSCREEN_USB_COMPOSITE
	220
	221	config TOUCHSCREEN_USB_3M
	222	default y
	223	bool "3M/Microtouch EX II series device support" if EMBEDDED
	224	depends on TOUCHSCREEN_USB_COMPOSITE
	225
	226	config TOUCHSCREEN_USB_ITM
	227	default y
	228	bool "ITM device support" if EMBEDDED
	229	depends on TOUCHSCREEN_USB_COMPOSITE
	230
	231	config TOUCHSCREEN_USB_ETURBO
	232	default y
	233	bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
	234	depends on TOUCHSCREEN_USB_COMPOSITE
	235
	236	config TOUCHSCREEN_USB_GUNZE
	237	default y
	238	bool "Gunze AHL61 device support" if EMBEDDED
	239	depends on TOUCHSCREEN_USB_COMPOSITE
	240
	241	config TOUCHSCREEN_USB_DMC_TSC10
	242	default y
	243	bool "DMC TSC-10/25 device support" if EMBEDDED
	244	depends on TOUCHSCREEN_USB_COMPOSITE
	245
df561fcd OZ	246	config TOUCHSCREEN_USB_IRTOUCH
	247	default y
	248	bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED
	249	depends on TOUCHSCREEN_USB_COMPOSITE
	250
a14a8401 OZ	251	config TOUCHSCREEN_USB_IDEALTEK
	252	default y
	253	bool "IdealTEK URTC1000 device support" if EMBEDDED
	254	depends on TOUCHSCREEN_USB_COMPOSITE
	255
9d5657db IF	256	config TOUCHSCREEN_USB_GENERAL_TOUCH
	257	default y
	258	bool "GeneralTouch Touchscreen device support" if EMBEDDED
	259	depends on TOUCHSCREEN_USB_COMPOSITE
	260
14e40206 JJ	261	config TOUCHSCREEN_USB_GOTOP
	262	default y
	263	bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED
	264	depends on TOUCHSCREEN_USB_COMPOSITE
	265
1da177e4	266	endif