[mirror_ubuntu-focal-kernel.git] / drivers / input / touchscreen / Kconfig

#
# Mouse driver configuration
#
menuconfig INPUT_TOUCHSCREEN
	bool "Touchscreens"
	help
	  Say Y here, and a list of supported touchscreens will be displayed.
	  This option doesn't affect the kernel.

	  If unsure, say Y.

if INPUT_TOUCHSCREEN

config TOUCHSCREEN_ADS7846
	tristate "ADS 7846/7843 based touchscreens"
	depends on SPI_MASTER
	depends on HWMON = n || HWMON
	help
	  Say Y here if you have a touchscreen interface using the
	  ADS7846 or ADS7843 controller, and your board-specific setup
	  code includes that in its table of SPI devices.

	  If HWMON is selected, and the driver is told the reference voltage
	  on your board, you will also get hwmon interfaces for the voltage
	  (and on ads7846, temperature) sensors of this chip.

	  If unsure, say N (but it's safe to say "Y").

	  To compile this driver as a module, choose M here: the
	  module will be called ads7846.

config TOUCHSCREEN_BITSY
	tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
	depends on SA1100_BITSY
	select SERIO
	help
	  Say Y here if you have the h3600 (Bitsy) touchscreen.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called h3600_ts_input.

config TOUCHSCREEN_CORGI
	tristate "SharpSL (Corgi and Spitz series) touchscreen driver"
	depends on PXA_SHARPSL
	default y	
	help
	  Say Y here to enable the driver for the touchscreen on the 
	  Sharp SL-C7xx and SL-Cxx00 series of PDAs.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called corgi_ts.

config TOUCHSCREEN_GUNZE
	tristate "Gunze AHL-51S touchscreen"
	select SERIO
	help
	  Say Y here if you have the Gunze AHL-51 touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called gunze.

config TOUCHSCREEN_ELO
	tristate "Elo serial touchscreens"
	select SERIO
	help
	  Say Y here if you have an Elo serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called elo.

config TOUCHSCREEN_MTOUCH
	tristate "MicroTouch serial touchscreens"
	select SERIO
	help
	  Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called mtouch.

config TOUCHSCREEN_MK712
	tristate "ICS MicroClock MK712 touchscreen"
	help
	  Say Y here if you have the ICS MicroClock MK712 touchscreen
	  controller chip in your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called mk712.

config TOUCHSCREEN_HP600
	tristate "HP Jornada 680/690 touchscreen"
	depends on SH_HP6XX && SH_ADC
	help
	  Say Y here if you have a HP Jornada 680 or 690 and want to
          support the built-in touchscreen.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called hp680_ts_input.

config TOUCHSCREEN_PENMOUNT
	tristate "Penmount serial touchscreen"
	select SERIO
	help
	  Say Y here if you have a Penmount serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called penmount.

config TOUCHSCREEN_TOUCHRIGHT
	tristate "Touchright serial touchscreen"
	select SERIO
	help
	  Say Y here if you have a Touchright serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called touchright.

config TOUCHSCREEN_TOUCHWIN
	tristate "Touchwin serial touchscreen"
	select SERIO
	help
	  Say Y here if you have a Touchwin serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called touchwin.

config TOUCHSCREEN_UCB1400
	tristate "Philips UCB1400 touchscreen"
	select AC97_BUS
	help
	  This enables support for the Philips UCB1400 touchscreen interface.
	  The UCB1400 is an AC97 audio codec.  The touchscreen interface
	  will be initialized only after the ALSA subsystem has been
	  brought up and the UCB1400 detected.  You therefore have to
	  configure ALSA support as well (either built-in or modular,
	  independently of whether this driver is itself built-in or
	  modular) for this driver to work.

	  To compile this driver as a module, choose M here: the
	  module will be called ucb1400_ts.

endif
Commit	Line	Data
1da177e4 LT	1	#
	2	# Mouse driver configuration
	3	#
	4	menuconfig INPUT_TOUCHSCREEN
	5	bool "Touchscreens"
	6	help
	7	Say Y here, and a list of supported touchscreens will be displayed.
	8	This option doesn't affect the kernel.
	9
	10	If unsure, say Y.
	11
	12	if INPUT_TOUCHSCREEN
	13
ffa458c1	14	config TOUCHSCREEN_ADS7846
2c8dc071	15	tristate "ADS 7846/7843 based touchscreens"
ffa458c1	16	depends on SPI_MASTER
2c8dc071	17	depends on HWMON = n \|\| HWMON
ffa458c1 DB	18	help
ffa458c1 DB	19	Say Y here if you have a touchscreen interface using the
2c8dc071	20	ADS7846 or ADS7843 controller, and your board-specific setup
ffa458c1 DB	21	code includes that in its table of SPI devices.
ffa458c1 DB	22
2c8dc071 DB	23	If HWMON is selected, and the driver is told the reference voltage
	24	on your board, you will also get hwmon interfaces for the voltage
	25	(and on ads7846, temperature) sensors of this chip.
	26
ffa458c1 DB	27	If unsure, say N (but it's safe to say "Y").
	28
	29	To compile this driver as a module, choose M here: the
	30	module will be called ads7846.
	31
1da177e4 LT	32	config TOUCHSCREEN_BITSY
	33	tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
	34	depends on SA1100_BITSY
	35	select SERIO
	36	help
	37	Say Y here if you have the h3600 (Bitsy) touchscreen.
	38
	39	If unsure, say N.
	40
	41	To compile this driver as a module, choose M here: the
	42	module will be called h3600_ts_input.
	43
	44	config TOUCHSCREEN_CORGI
513b6e1a	45	tristate "SharpSL (Corgi and Spitz series) touchscreen driver"
1da177e4 LT	46	depends on PXA_SHARPSL
	47	default y
	48	help
	49	Say Y here to enable the driver for the touchscreen on the
513b6e1a	50	Sharp SL-C7xx and SL-Cxx00 series of PDAs.
1da177e4 LT	51
	52	If unsure, say N.
	53
	54	To compile this driver as a module, choose M here: the
513b6e1a	55	module will be called corgi_ts.
1da177e4 LT	56
	57	config TOUCHSCREEN_GUNZE
	58	tristate "Gunze AHL-51S touchscreen"
	59	select SERIO
	60	help
	61	Say Y here if you have the Gunze AHL-51 touchscreen connected to
	62	your system.
	63
	64	If unsure, say N.
	65
	66	To compile this driver as a module, choose M here: the
	67	module will be called gunze.
	68
	69	config TOUCHSCREEN_ELO
	70	tristate "Elo serial touchscreens"
	71	select SERIO
	72	help
	73	Say Y here if you have an Elo serial touchscreen connected to
	74	your system.
	75
	76	If unsure, say N.
	77
	78	To compile this driver as a module, choose M here: the
153ab429	79	module will be called elo.
1da177e4 LT	80
	81	config TOUCHSCREEN_MTOUCH
	82	tristate "MicroTouch serial touchscreens"
	83	select SERIO
	84	help
	85	Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
	86	your system.
	87
	88	If unsure, say N.
	89
	90	To compile this driver as a module, choose M here: the
	91	module will be called mtouch.
	92
	93	config TOUCHSCREEN_MK712
	94	tristate "ICS MicroClock MK712 touchscreen"
	95	help
	96	Say Y here if you have the ICS MicroClock MK712 touchscreen
	97	controller chip in your system.
	98
	99	If unsure, say N.
	100
	101	To compile this driver as a module, choose M here: the
	102	module will be called mk712.
	103
	104	config TOUCHSCREEN_HP600
	105	tristate "HP Jornada 680/690 touchscreen"
0025835c	106	depends on SH_HP6XX && SH_ADC
1da177e4 LT	107	help
	108	Say Y here if you have a HP Jornada 680 or 690 and want to
	109	support the built-in touchscreen.
	110
	111	If unsure, say N.
	112
	113	To compile this driver as a module, choose M here: the
	114	module will be called hp680_ts_input.
	115
ee479999 RK	116	config TOUCHSCREEN_PENMOUNT
	117	tristate "Penmount serial touchscreen"
	118	select SERIO
	119	help
	120	Say Y here if you have a Penmount serial touchscreen connected to
	121	your system.
	122
	123	If unsure, say N.
	124
	125	To compile this driver as a module, choose M here: the
	126	module will be called penmount.
	127
4003dff4 RK	128	config TOUCHSCREEN_TOUCHRIGHT
	129	tristate "Touchright serial touchscreen"
	130	select SERIO
	131	help
	132	Say Y here if you have a Touchright serial touchscreen connected to
	133	your system.
	134
	135	If unsure, say N.
	136
	137	To compile this driver as a module, choose M here: the
	138	module will be called touchright.
	139
11ea3173 RK	140	config TOUCHSCREEN_TOUCHWIN
	141	tristate "Touchwin serial touchscreen"
	142	select SERIO
	143	help
	144	Say Y here if you have a Touchwin serial touchscreen connected to
	145	your system.
	146
	147	If unsure, say N.
	148
	149	To compile this driver as a module, choose M here: the
	150	module will be called touchwin.
	151
f40219bf NP	152	config TOUCHSCREEN_UCB1400
f40219bf NP	153	tristate "Philips UCB1400 touchscreen"
e1036502	154	select AC97_BUS
f40219bf NP	155	help
	156	This enables support for the Philips UCB1400 touchscreen interface.
	157	The UCB1400 is an AC97 audio codec. The touchscreen interface
	158	will be initialized only after the ALSA subsystem has been
	159	brought up and the UCB1400 detected. You therefore have to
	160	configure ALSA support as well (either built-in or modular,
	161	independently of whether this driver is itself built-in or
	162	modular) for this driver to work.
	163
	164	To compile this driver as a module, choose M here: the
	165	module will be called ucb1400_ts.
	166
1da177e4	167	endif