]>
Commit | Line | Data |
---|---|---|
97fb5e8d | 1 | // SPDX-License-Identifier: GPL-2.0-only |
67bf12ca FY |
2 | /* |
3 | * Source for: | |
4 | * Cypress TrueTouch(TM) Standard Product (TTSP) SPI touchscreen driver. | |
5 | * For use with Cypress Txx4xx parts. | |
6 | * Supported parts include: | |
7 | * TMA4XX | |
8 | * TMA1036 | |
9 | * | |
10 | * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. | |
11 | * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> | |
12 | * Copyright (C) 2013 Cypress Semiconductor | |
13 | * | |
67bf12ca | 14 | * Contact Cypress Semiconductor at www.cypress.com <ttdrivers@cypress.com> |
67bf12ca FY |
15 | */ |
16 | ||
17 | #include "cyttsp4_core.h" | |
18 | ||
19 | #include <linux/delay.h> | |
20 | #include <linux/input.h> | |
21 | #include <linux/spi/spi.h> | |
22 | ||
23 | #define CY_SPI_WR_OP 0x00 /* r/~w */ | |
24 | #define CY_SPI_RD_OP 0x01 | |
25 | #define CY_SPI_BITS_PER_WORD 8 | |
26 | #define CY_SPI_A8_BIT 0x02 | |
27 | #define CY_SPI_WR_HEADER_BYTES 2 | |
28 | #define CY_SPI_RD_HEADER_BYTES 1 | |
29 | #define CY_SPI_CMD_BYTES 2 | |
30 | #define CY_SPI_SYNC_BYTE 0 | |
31 | #define CY_SPI_SYNC_ACK 0x62 /* from TRM *A protocol */ | |
32 | #define CY_SPI_DATA_SIZE (2 * 256) | |
33 | ||
34 | #define CY_SPI_DATA_BUF_SIZE (CY_SPI_CMD_BYTES + CY_SPI_DATA_SIZE) | |
35 | ||
36 | static int cyttsp_spi_xfer(struct device *dev, u8 *xfer_buf, | |
62f548d0 | 37 | u8 op, u16 reg, u8 *buf, int length) |
67bf12ca FY |
38 | { |
39 | struct spi_device *spi = to_spi_device(dev); | |
40 | struct spi_message msg; | |
41 | struct spi_transfer xfer[2]; | |
42 | u8 *wr_buf = &xfer_buf[0]; | |
43 | u8 rd_buf[CY_SPI_CMD_BYTES]; | |
44 | int retval; | |
45 | int i; | |
46 | ||
47 | if (length > CY_SPI_DATA_SIZE) { | |
48 | dev_err(dev, "%s: length %d is too big.\n", | |
49 | __func__, length); | |
50 | return -EINVAL; | |
51 | } | |
52 | ||
53 | memset(wr_buf, 0, CY_SPI_DATA_BUF_SIZE); | |
54 | memset(rd_buf, 0, CY_SPI_CMD_BYTES); | |
55 | ||
62f548d0 FY |
56 | wr_buf[0] = op + (((reg >> 8) & 0x1) ? CY_SPI_A8_BIT : 0); |
57 | if (op == CY_SPI_WR_OP) { | |
58 | wr_buf[1] = reg & 0xFF; | |
59 | if (length > 0) | |
60 | memcpy(wr_buf + CY_SPI_CMD_BYTES, buf, length); | |
61 | } | |
67bf12ca FY |
62 | |
63 | memset(xfer, 0, sizeof(xfer)); | |
64 | spi_message_init(&msg); | |
65 | ||
66 | /* | |
67 | We set both TX and RX buffers because Cypress TTSP | |
68 | requires full duplex operation. | |
69 | */ | |
70 | xfer[0].tx_buf = wr_buf; | |
71 | xfer[0].rx_buf = rd_buf; | |
72 | switch (op) { | |
73 | case CY_SPI_WR_OP: | |
74 | xfer[0].len = length + CY_SPI_CMD_BYTES; | |
75 | spi_message_add_tail(&xfer[0], &msg); | |
76 | break; | |
77 | ||
78 | case CY_SPI_RD_OP: | |
79 | xfer[0].len = CY_SPI_RD_HEADER_BYTES; | |
80 | spi_message_add_tail(&xfer[0], &msg); | |
81 | ||
82 | xfer[1].rx_buf = buf; | |
83 | xfer[1].len = length; | |
84 | spi_message_add_tail(&xfer[1], &msg); | |
85 | break; | |
86 | ||
87 | default: | |
88 | dev_err(dev, "%s: bad operation code=%d\n", __func__, op); | |
89 | return -EINVAL; | |
90 | } | |
91 | ||
92 | retval = spi_sync(spi, &msg); | |
93 | if (retval < 0) { | |
94 | dev_dbg(dev, "%s: spi_sync() error %d, len=%d, op=%d\n", | |
95 | __func__, retval, xfer[1].len, op); | |
96 | ||
97 | /* | |
98 | * do not return here since was a bad ACK sequence | |
99 | * let the following ACK check handle any errors and | |
100 | * allow silent retries | |
101 | */ | |
102 | } | |
103 | ||
104 | if (rd_buf[CY_SPI_SYNC_BYTE] != CY_SPI_SYNC_ACK) { | |
105 | dev_dbg(dev, "%s: operation %d failed\n", __func__, op); | |
106 | ||
107 | for (i = 0; i < CY_SPI_CMD_BYTES; i++) | |
108 | dev_dbg(dev, "%s: test rd_buf[%d]:0x%02x\n", | |
109 | __func__, i, rd_buf[i]); | |
110 | for (i = 0; i < length; i++) | |
111 | dev_dbg(dev, "%s: test buf[%d]:0x%02x\n", | |
112 | __func__, i, buf[i]); | |
113 | ||
114 | return -EIO; | |
115 | } | |
116 | ||
117 | return 0; | |
118 | } | |
119 | ||
120 | static int cyttsp_spi_read_block_data(struct device *dev, u8 *xfer_buf, | |
62f548d0 | 121 | u16 addr, u8 length, void *data) |
67bf12ca FY |
122 | { |
123 | int rc; | |
124 | ||
125 | rc = cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_WR_OP, addr, NULL, 0); | |
126 | if (rc) | |
127 | return rc; | |
128 | else | |
129 | return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_RD_OP, addr, data, | |
130 | length); | |
131 | } | |
132 | ||
133 | static int cyttsp_spi_write_block_data(struct device *dev, u8 *xfer_buf, | |
62f548d0 | 134 | u16 addr, u8 length, const void *data) |
67bf12ca FY |
135 | { |
136 | return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_WR_OP, addr, (void *)data, | |
137 | length); | |
138 | } | |
139 | ||
140 | static const struct cyttsp4_bus_ops cyttsp_spi_bus_ops = { | |
141 | .bustype = BUS_SPI, | |
142 | .write = cyttsp_spi_write_block_data, | |
143 | .read = cyttsp_spi_read_block_data, | |
144 | }; | |
145 | ||
146 | static int cyttsp4_spi_probe(struct spi_device *spi) | |
147 | { | |
148 | struct cyttsp4 *ts; | |
149 | int error; | |
150 | ||
151 | /* Set up SPI*/ | |
152 | spi->bits_per_word = CY_SPI_BITS_PER_WORD; | |
153 | spi->mode = SPI_MODE_0; | |
154 | error = spi_setup(spi); | |
155 | if (error < 0) { | |
156 | dev_err(&spi->dev, "%s: SPI setup error %d\n", | |
157 | __func__, error); | |
158 | return error; | |
159 | } | |
160 | ||
161 | ts = cyttsp4_probe(&cyttsp_spi_bus_ops, &spi->dev, spi->irq, | |
162 | CY_SPI_DATA_BUF_SIZE); | |
163 | ||
a0137817 | 164 | return PTR_ERR_OR_ZERO(ts); |
67bf12ca FY |
165 | } |
166 | ||
167 | static int cyttsp4_spi_remove(struct spi_device *spi) | |
168 | { | |
169 | struct cyttsp4 *ts = spi_get_drvdata(spi); | |
170 | cyttsp4_remove(ts); | |
171 | ||
172 | return 0; | |
173 | } | |
174 | ||
175 | static struct spi_driver cyttsp4_spi_driver = { | |
176 | .driver = { | |
177 | .name = CYTTSP4_SPI_NAME, | |
67bf12ca FY |
178 | .pm = &cyttsp4_pm_ops, |
179 | }, | |
180 | .probe = cyttsp4_spi_probe, | |
181 | .remove = cyttsp4_spi_remove, | |
182 | }; | |
183 | ||
184 | module_spi_driver(cyttsp4_spi_driver); | |
185 | ||
186 | MODULE_LICENSE("GPL"); | |
187 | MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) SPI driver"); | |
188 | MODULE_AUTHOR("Cypress"); | |
189 | MODULE_ALIAS("spi:cyttsp4"); |