]>
Commit | Line | Data |
---|---|---|
af69fb3a KK |
1 | /* |
2 | * hfcmulti.c low level driver for hfc-4s/hfc-8s/hfc-e1 based cards | |
3 | * | |
4 | * Author Andreas Eversberg (jolly@eversberg.eu) | |
5 | * ported to mqueue mechanism: | |
6 | * Peter Sprenger (sprengermoving-bytes.de) | |
7 | * | |
8 | * inspired by existing hfc-pci driver: | |
9 | * Copyright 1999 by Werner Cornelius (werner@isdn-development.de) | |
10 | * Copyright 2008 by Karsten Keil (kkeil@suse.de) | |
11 | * Copyright 2008 by Andreas Eversberg (jolly@eversberg.eu) | |
12 | * | |
13 | * This program is free software; you can redistribute it and/or modify | |
14 | * it under the terms of the GNU General Public License as published by | |
15 | * the Free Software Foundation; either version 2, or (at your option) | |
16 | * any later version. | |
17 | * | |
18 | * This program is distributed in the hope that it will be useful, | |
19 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
20 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
21 | * GNU General Public License for more details. | |
22 | * | |
23 | * You should have received a copy of the GNU General Public License | |
24 | * along with this program; if not, write to the Free Software | |
25 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
26 | * | |
27 | * | |
28 | * Thanks to Cologne Chip AG for this great controller! | |
29 | */ | |
30 | ||
31 | /* | |
32 | * module parameters: | |
33 | * type: | |
34 | * By default (0), the card is automatically detected. | |
35 | * Or use the following combinations: | |
36 | * Bit 0-7 = 0x00001 = HFC-E1 (1 port) | |
37 | * or Bit 0-7 = 0x00004 = HFC-4S (4 ports) | |
38 | * or Bit 0-7 = 0x00008 = HFC-8S (8 ports) | |
39 | * Bit 8 = 0x00100 = uLaw (instead of aLaw) | |
40 | * Bit 9 = 0x00200 = Disable DTMF detect on all B-channels via hardware | |
41 | * Bit 10 = spare | |
42 | * Bit 11 = 0x00800 = Force PCM bus into slave mode. (otherwhise auto) | |
43 | * or Bit 12 = 0x01000 = Force PCM bus into master mode. (otherwhise auto) | |
44 | * Bit 13 = spare | |
45 | * Bit 14 = 0x04000 = Use external ram (128K) | |
46 | * Bit 15 = 0x08000 = Use external ram (512K) | |
47 | * Bit 16 = 0x10000 = Use 64 timeslots instead of 32 | |
48 | * or Bit 17 = 0x20000 = Use 128 timeslots instead of anything else | |
49 | * Bit 18 = spare | |
50 | * Bit 19 = 0x80000 = Send the Watchdog a Signal (Dual E1 with Watchdog) | |
51 | * (all other bits are reserved and shall be 0) | |
52 | * example: 0x20204 one HFC-4S with dtmf detection and 128 timeslots on PCM | |
53 | * bus (PCM master) | |
54 | * | |
55 | * port: (optional or required for all ports on all installed cards) | |
56 | * HFC-4S/HFC-8S only bits: | |
57 | * Bit 0 = 0x001 = Use master clock for this S/T interface | |
58 | * (ony once per chip). | |
59 | * Bit 1 = 0x002 = transmitter line setup (non capacitive mode) | |
60 | * Don't use this unless you know what you are doing! | |
61 | * Bit 2 = 0x004 = Disable E-channel. (No E-channel processing) | |
62 | * example: 0x0001,0x0000,0x0000,0x0000 one HFC-4S with master clock | |
63 | * received from port 1 | |
64 | * | |
65 | * HFC-E1 only bits: | |
66 | * Bit 0 = 0x0001 = interface: 0=copper, 1=optical | |
67 | * Bit 1 = 0x0002 = reserved (later for 32 B-channels transparent mode) | |
68 | * Bit 2 = 0x0004 = Report LOS | |
69 | * Bit 3 = 0x0008 = Report AIS | |
70 | * Bit 4 = 0x0010 = Report SLIP | |
71 | * Bit 5 = 0x0020 = Report RDI | |
72 | * Bit 8 = 0x0100 = Turn off CRC-4 Multiframe Mode, use double frame | |
73 | * mode instead. | |
74 | * Bit 9 = 0x0200 = Force get clock from interface, even in NT mode. | |
75 | * or Bit 10 = 0x0400 = Force put clock to interface, even in TE mode. | |
76 | * Bit 11 = 0x0800 = Use direct RX clock for PCM sync rather than PLL. | |
77 | * (E1 only) | |
78 | * Bit 12-13 = 0xX000 = elastic jitter buffer (1-3), Set both bits to 0 | |
79 | * for default. | |
80 | * (all other bits are reserved and shall be 0) | |
81 | * | |
82 | * debug: | |
83 | * NOTE: only one debug value must be given for all cards | |
84 | * enable debugging (see hfc_multi.h for debug options) | |
85 | * | |
86 | * poll: | |
87 | * NOTE: only one poll value must be given for all cards | |
88 | * Give the number of samples for each fifo process. | |
89 | * By default 128 is used. Decrease to reduce delay, increase to | |
90 | * reduce cpu load. If unsure, don't mess with it! | |
91 | * Valid is 8, 16, 32, 64, 128, 256. | |
92 | * | |
93 | * pcm: | |
94 | * NOTE: only one pcm value must be given for every card. | |
95 | * The PCM bus id tells the mISDNdsp module about the connected PCM bus. | |
96 | * By default (0), the PCM bus id is 100 for the card that is PCM master. | |
97 | * If multiple cards are PCM master (because they are not interconnected), | |
98 | * each card with PCM master will have increasing PCM id. | |
99 | * All PCM busses with the same ID are expected to be connected and have | |
100 | * common time slots slots. | |
101 | * Only one chip of the PCM bus must be master, the others slave. | |
102 | * -1 means no support of PCM bus not even. | |
103 | * Omit this value, if all cards are interconnected or none is connected. | |
104 | * If unsure, don't give this parameter. | |
105 | * | |
106 | * dslot: | |
44e09589 | 107 | * NOTE: only one dslot value must be given for every card. |
af69fb3a KK |
108 | * Also this value must be given for non-E1 cards. If omitted, the E1 |
109 | * card has D-channel on time slot 16, which is default. | |
110 | * If 1..15 or 17..31, an alternate time slot is used for D-channel. | |
111 | * In this case, the application must be able to handle this. | |
112 | * If -1 is given, the D-channel is disabled and all 31 slots can be used | |
113 | * for B-channel. (only for specific applications) | |
114 | * If you don't know how to use it, you don't need it! | |
115 | * | |
116 | * iomode: | |
117 | * NOTE: only one mode value must be given for every card. | |
118 | * -> See hfc_multi.h for HFC_IO_MODE_* values | |
119 | * By default, the IO mode is pci memory IO (MEMIO). | |
120 | * Some cards requre specific IO mode, so it cannot be changed. | |
121 | * It may be usefull to set IO mode to register io (REGIO) to solve | |
122 | * PCI bridge problems. | |
123 | * If unsure, don't give this parameter. | |
124 | * | |
125 | * clockdelay_nt: | |
126 | * NOTE: only one clockdelay_nt value must be given once for all cards. | |
127 | * Give the value of the clock control register (A_ST_CLK_DLY) | |
128 | * of the S/T interfaces in NT mode. | |
129 | * This register is needed for the TBR3 certification, so don't change it. | |
130 | * | |
131 | * clockdelay_te: | |
132 | * NOTE: only one clockdelay_te value must be given once | |
133 | * Give the value of the clock control register (A_ST_CLK_DLY) | |
134 | * of the S/T interfaces in TE mode. | |
135 | * This register is needed for the TBR3 certification, so don't change it. | |
3bd69ad1 AE |
136 | * |
137 | * clock: | |
1b36c78f | 138 | * NOTE: only one clock value must be given once |
3bd69ad1 AE |
139 | * Selects interface with clock source for mISDN and applications. |
140 | * Set to card number starting with 1. Set to -1 to disable. | |
141 | * By default, the first card is used as clock source. | |
db9bb63a KK |
142 | * |
143 | * hwid: | |
144 | * NOTE: only one hwid value must be given once | |
145 | * Enable special embedded devices with XHFC controllers. | |
af69fb3a KK |
146 | */ |
147 | ||
148 | /* | |
149 | * debug register access (never use this, it will flood your system log) | |
150 | * #define HFC_REGISTER_DEBUG | |
151 | */ | |
152 | ||
69e656cc | 153 | #define HFC_MULTI_VERSION "2.03" |
af69fb3a KK |
154 | |
155 | #include <linux/module.h> | |
156 | #include <linux/pci.h> | |
157 | #include <linux/delay.h> | |
158 | #include <linux/mISDNhw.h> | |
159 | #include <linux/mISDNdsp.h> | |
160 | ||
161 | /* | |
162 | #define IRQCOUNT_DEBUG | |
163 | #define IRQ_DEBUG | |
164 | */ | |
165 | ||
166 | #include "hfc_multi.h" | |
167 | #ifdef ECHOPREP | |
168 | #include "gaintab.h" | |
169 | #endif | |
170 | ||
171 | #define MAX_CARDS 8 | |
172 | #define MAX_PORTS (8 * MAX_CARDS) | |
173 | ||
174 | static LIST_HEAD(HFClist); | |
175 | static spinlock_t HFClock; /* global hfc list lock */ | |
176 | ||
177 | static void ph_state_change(struct dchannel *); | |
af69fb3a KK |
178 | |
179 | static struct hfc_multi *syncmaster; | |
5b834354 | 180 | static int plxsd_master; /* if we have a master card (yet) */ |
af69fb3a | 181 | static spinlock_t plx_lock; /* may not acquire other lock inside */ |
af69fb3a KK |
182 | |
183 | #define TYP_E1 1 | |
184 | #define TYP_4S 4 | |
185 | #define TYP_8S 8 | |
186 | ||
187 | static int poll_timer = 6; /* default = 128 samples = 16ms */ | |
188 | /* number of POLL_TIMER interrupts for G2 timeout (ca 1s) */ | |
189 | static int nt_t1_count[] = { 3840, 1920, 960, 480, 240, 120, 60, 30 }; | |
190 | #define CLKDEL_TE 0x0f /* CLKDEL in TE mode */ | |
191 | #define CLKDEL_NT 0x6c /* CLKDEL in NT mode | |
192 | (0x60 MUST be included!) */ | |
af69fb3a KK |
193 | |
194 | #define DIP_4S 0x1 /* DIP Switches for Beronet 1S/2S/4S cards */ | |
195 | #define DIP_8S 0x2 /* DIP Switches for Beronet 8S+ cards */ | |
196 | #define DIP_E1 0x3 /* DIP Switches for Beronet E1 cards */ | |
197 | ||
198 | /* | |
199 | * module stuff | |
200 | */ | |
201 | ||
202 | static uint type[MAX_CARDS]; | |
3bd69ad1 AE |
203 | static int pcm[MAX_CARDS]; |
204 | static int dslot[MAX_CARDS]; | |
af69fb3a KK |
205 | static uint iomode[MAX_CARDS]; |
206 | static uint port[MAX_PORTS]; | |
207 | static uint debug; | |
208 | static uint poll; | |
3bd69ad1 | 209 | static int clock; |
af69fb3a KK |
210 | static uint timer; |
211 | static uint clockdelay_te = CLKDEL_TE; | |
212 | static uint clockdelay_nt = CLKDEL_NT; | |
db9bb63a KK |
213 | #define HWID_NONE 0 |
214 | #define HWID_MINIP4 1 | |
215 | #define HWID_MINIP8 2 | |
216 | #define HWID_MINIP16 3 | |
217 | static uint hwid = HWID_NONE; | |
af69fb3a KK |
218 | |
219 | static int HFC_cnt, Port_cnt, PCM_cnt = 99; | |
220 | ||
221 | MODULE_AUTHOR("Andreas Eversberg"); | |
222 | MODULE_LICENSE("GPL"); | |
69e656cc | 223 | MODULE_VERSION(HFC_MULTI_VERSION); |
af69fb3a KK |
224 | module_param(debug, uint, S_IRUGO | S_IWUSR); |
225 | module_param(poll, uint, S_IRUGO | S_IWUSR); | |
3bd69ad1 | 226 | module_param(clock, int, S_IRUGO | S_IWUSR); |
af69fb3a KK |
227 | module_param(timer, uint, S_IRUGO | S_IWUSR); |
228 | module_param(clockdelay_te, uint, S_IRUGO | S_IWUSR); | |
229 | module_param(clockdelay_nt, uint, S_IRUGO | S_IWUSR); | |
230 | module_param_array(type, uint, NULL, S_IRUGO | S_IWUSR); | |
3bd69ad1 AE |
231 | module_param_array(pcm, int, NULL, S_IRUGO | S_IWUSR); |
232 | module_param_array(dslot, int, NULL, S_IRUGO | S_IWUSR); | |
af69fb3a KK |
233 | module_param_array(iomode, uint, NULL, S_IRUGO | S_IWUSR); |
234 | module_param_array(port, uint, NULL, S_IRUGO | S_IWUSR); | |
db9bb63a | 235 | module_param(hwid, uint, S_IRUGO | S_IWUSR); /* The hardware ID */ |
af69fb3a KK |
236 | |
237 | #ifdef HFC_REGISTER_DEBUG | |
238 | #define HFC_outb(hc, reg, val) \ | |
239 | (hc->HFC_outb(hc, reg, val, __func__, __LINE__)) | |
240 | #define HFC_outb_nodebug(hc, reg, val) \ | |
241 | (hc->HFC_outb_nodebug(hc, reg, val, __func__, __LINE__)) | |
242 | #define HFC_inb(hc, reg) \ | |
243 | (hc->HFC_inb(hc, reg, __func__, __LINE__)) | |
244 | #define HFC_inb_nodebug(hc, reg) \ | |
245 | (hc->HFC_inb_nodebug(hc, reg, __func__, __LINE__)) | |
246 | #define HFC_inw(hc, reg) \ | |
247 | (hc->HFC_inw(hc, reg, __func__, __LINE__)) | |
248 | #define HFC_inw_nodebug(hc, reg) \ | |
249 | (hc->HFC_inw_nodebug(hc, reg, __func__, __LINE__)) | |
250 | #define HFC_wait(hc) \ | |
251 | (hc->HFC_wait(hc, __func__, __LINE__)) | |
252 | #define HFC_wait_nodebug(hc) \ | |
253 | (hc->HFC_wait_nodebug(hc, __func__, __LINE__)) | |
254 | #else | |
255 | #define HFC_outb(hc, reg, val) (hc->HFC_outb(hc, reg, val)) | |
256 | #define HFC_outb_nodebug(hc, reg, val) (hc->HFC_outb_nodebug(hc, reg, val)) | |
257 | #define HFC_inb(hc, reg) (hc->HFC_inb(hc, reg)) | |
258 | #define HFC_inb_nodebug(hc, reg) (hc->HFC_inb_nodebug(hc, reg)) | |
259 | #define HFC_inw(hc, reg) (hc->HFC_inw(hc, reg)) | |
260 | #define HFC_inw_nodebug(hc, reg) (hc->HFC_inw_nodebug(hc, reg)) | |
261 | #define HFC_wait(hc) (hc->HFC_wait(hc)) | |
262 | #define HFC_wait_nodebug(hc) (hc->HFC_wait_nodebug(hc)) | |
263 | #endif | |
264 | ||
db9bb63a KK |
265 | #ifdef CONFIG_MISDN_HFCMULTI_8xx |
266 | #include "hfc_multi_8xx.h" | |
267 | #endif | |
268 | ||
af69fb3a KK |
269 | /* HFC_IO_MODE_PCIMEM */ |
270 | static void | |
271 | #ifdef HFC_REGISTER_DEBUG | |
272 | HFC_outb_pcimem(struct hfc_multi *hc, u_char reg, u_char val, | |
273 | const char *function, int line) | |
274 | #else | |
275 | HFC_outb_pcimem(struct hfc_multi *hc, u_char reg, u_char val) | |
276 | #endif | |
277 | { | |
eac74af9 | 278 | writeb(val, hc->pci_membase + reg); |
af69fb3a KK |
279 | } |
280 | static u_char | |
281 | #ifdef HFC_REGISTER_DEBUG | |
282 | HFC_inb_pcimem(struct hfc_multi *hc, u_char reg, const char *function, int line) | |
283 | #else | |
284 | HFC_inb_pcimem(struct hfc_multi *hc, u_char reg) | |
285 | #endif | |
286 | { | |
eac74af9 | 287 | return readb(hc->pci_membase + reg); |
af69fb3a KK |
288 | } |
289 | static u_short | |
290 | #ifdef HFC_REGISTER_DEBUG | |
291 | HFC_inw_pcimem(struct hfc_multi *hc, u_char reg, const char *function, int line) | |
292 | #else | |
293 | HFC_inw_pcimem(struct hfc_multi *hc, u_char reg) | |
294 | #endif | |
295 | { | |
eac74af9 | 296 | return readw(hc->pci_membase + reg); |
af69fb3a KK |
297 | } |
298 | static void | |
299 | #ifdef HFC_REGISTER_DEBUG | |
300 | HFC_wait_pcimem(struct hfc_multi *hc, const char *function, int line) | |
301 | #else | |
302 | HFC_wait_pcimem(struct hfc_multi *hc) | |
303 | #endif | |
304 | { | |
eac74af9 KK |
305 | while (readb(hc->pci_membase + R_STATUS) & V_BUSY) |
306 | cpu_relax(); | |
af69fb3a KK |
307 | } |
308 | ||
309 | /* HFC_IO_MODE_REGIO */ | |
310 | static void | |
311 | #ifdef HFC_REGISTER_DEBUG | |
312 | HFC_outb_regio(struct hfc_multi *hc, u_char reg, u_char val, | |
313 | const char *function, int line) | |
314 | #else | |
315 | HFC_outb_regio(struct hfc_multi *hc, u_char reg, u_char val) | |
316 | #endif | |
317 | { | |
eac74af9 | 318 | outb(reg, hc->pci_iobase + 4); |
af69fb3a KK |
319 | outb(val, hc->pci_iobase); |
320 | } | |
321 | static u_char | |
322 | #ifdef HFC_REGISTER_DEBUG | |
323 | HFC_inb_regio(struct hfc_multi *hc, u_char reg, const char *function, int line) | |
324 | #else | |
325 | HFC_inb_regio(struct hfc_multi *hc, u_char reg) | |
326 | #endif | |
327 | { | |
eac74af9 | 328 | outb(reg, hc->pci_iobase + 4); |
af69fb3a KK |
329 | return inb(hc->pci_iobase); |
330 | } | |
331 | static u_short | |
332 | #ifdef HFC_REGISTER_DEBUG | |
333 | HFC_inw_regio(struct hfc_multi *hc, u_char reg, const char *function, int line) | |
334 | #else | |
335 | HFC_inw_regio(struct hfc_multi *hc, u_char reg) | |
336 | #endif | |
337 | { | |
eac74af9 | 338 | outb(reg, hc->pci_iobase + 4); |
af69fb3a KK |
339 | return inw(hc->pci_iobase); |
340 | } | |
341 | static void | |
342 | #ifdef HFC_REGISTER_DEBUG | |
343 | HFC_wait_regio(struct hfc_multi *hc, const char *function, int line) | |
344 | #else | |
345 | HFC_wait_regio(struct hfc_multi *hc) | |
346 | #endif | |
347 | { | |
eac74af9 KK |
348 | outb(R_STATUS, hc->pci_iobase + 4); |
349 | while (inb(hc->pci_iobase) & V_BUSY) | |
350 | cpu_relax(); | |
af69fb3a KK |
351 | } |
352 | ||
353 | #ifdef HFC_REGISTER_DEBUG | |
354 | static void | |
355 | HFC_outb_debug(struct hfc_multi *hc, u_char reg, u_char val, | |
356 | const char *function, int line) | |
357 | { | |
358 | char regname[256] = "", bits[9] = "xxxxxxxx"; | |
359 | int i; | |
360 | ||
361 | i = -1; | |
362 | while (hfc_register_names[++i].name) { | |
363 | if (hfc_register_names[i].reg == reg) | |
364 | strcat(regname, hfc_register_names[i].name); | |
365 | } | |
366 | if (regname[0] == '\0') | |
367 | strcpy(regname, "register"); | |
368 | ||
eac74af9 KK |
369 | bits[7] = '0' + (!!(val & 1)); |
370 | bits[6] = '0' + (!!(val & 2)); | |
371 | bits[5] = '0' + (!!(val & 4)); | |
372 | bits[4] = '0' + (!!(val & 8)); | |
373 | bits[3] = '0' + (!!(val & 16)); | |
374 | bits[2] = '0' + (!!(val & 32)); | |
375 | bits[1] = '0' + (!!(val & 64)); | |
376 | bits[0] = '0' + (!!(val & 128)); | |
af69fb3a KK |
377 | printk(KERN_DEBUG |
378 | "HFC_outb(chip %d, %02x=%s, 0x%02x=%s); in %s() line %d\n", | |
379 | hc->id, reg, regname, val, bits, function, line); | |
380 | HFC_outb_nodebug(hc, reg, val); | |
381 | } | |
382 | static u_char | |
383 | HFC_inb_debug(struct hfc_multi *hc, u_char reg, const char *function, int line) | |
384 | { | |
385 | char regname[256] = "", bits[9] = "xxxxxxxx"; | |
386 | u_char val = HFC_inb_nodebug(hc, reg); | |
387 | int i; | |
388 | ||
389 | i = 0; | |
390 | while (hfc_register_names[i++].name) | |
391 | ; | |
392 | while (hfc_register_names[++i].name) { | |
393 | if (hfc_register_names[i].reg == reg) | |
394 | strcat(regname, hfc_register_names[i].name); | |
395 | } | |
396 | if (regname[0] == '\0') | |
397 | strcpy(regname, "register"); | |
398 | ||
eac74af9 KK |
399 | bits[7] = '0' + (!!(val & 1)); |
400 | bits[6] = '0' + (!!(val & 2)); | |
401 | bits[5] = '0' + (!!(val & 4)); | |
402 | bits[4] = '0' + (!!(val & 8)); | |
403 | bits[3] = '0' + (!!(val & 16)); | |
404 | bits[2] = '0' + (!!(val & 32)); | |
405 | bits[1] = '0' + (!!(val & 64)); | |
406 | bits[0] = '0' + (!!(val & 128)); | |
af69fb3a KK |
407 | printk(KERN_DEBUG |
408 | "HFC_inb(chip %d, %02x=%s) = 0x%02x=%s; in %s() line %d\n", | |
409 | hc->id, reg, regname, val, bits, function, line); | |
410 | return val; | |
411 | } | |
412 | static u_short | |
413 | HFC_inw_debug(struct hfc_multi *hc, u_char reg, const char *function, int line) | |
414 | { | |
415 | char regname[256] = ""; | |
416 | u_short val = HFC_inw_nodebug(hc, reg); | |
417 | int i; | |
418 | ||
419 | i = 0; | |
420 | while (hfc_register_names[i++].name) | |
421 | ; | |
422 | while (hfc_register_names[++i].name) { | |
423 | if (hfc_register_names[i].reg == reg) | |
424 | strcat(regname, hfc_register_names[i].name); | |
425 | } | |
426 | if (regname[0] == '\0') | |
427 | strcpy(regname, "register"); | |
428 | ||
429 | printk(KERN_DEBUG | |
430 | "HFC_inw(chip %d, %02x=%s) = 0x%04x; in %s() line %d\n", | |
431 | hc->id, reg, regname, val, function, line); | |
432 | return val; | |
433 | } | |
434 | static void | |
435 | HFC_wait_debug(struct hfc_multi *hc, const char *function, int line) | |
436 | { | |
437 | printk(KERN_DEBUG "HFC_wait(chip %d); in %s() line %d\n", | |
438 | hc->id, function, line); | |
439 | HFC_wait_nodebug(hc); | |
440 | } | |
441 | #endif | |
442 | ||
443 | /* write fifo data (REGIO) */ | |
5b834354 | 444 | static void |
af69fb3a KK |
445 | write_fifo_regio(struct hfc_multi *hc, u_char *data, int len) |
446 | { | |
447 | outb(A_FIFO_DATA0, (hc->pci_iobase)+4); | |
448 | while (len>>2) { | |
b3e0aeeb | 449 | outl(cpu_to_le32(*(u32 *)data), hc->pci_iobase); |
af69fb3a KK |
450 | data += 4; |
451 | len -= 4; | |
452 | } | |
453 | while (len>>1) { | |
b3e0aeeb | 454 | outw(cpu_to_le16(*(u16 *)data), hc->pci_iobase); |
af69fb3a KK |
455 | data += 2; |
456 | len -= 2; | |
457 | } | |
458 | while (len) { | |
459 | outb(*data, hc->pci_iobase); | |
460 | data++; | |
461 | len--; | |
462 | } | |
463 | } | |
464 | /* write fifo data (PCIMEM) */ | |
5b834354 | 465 | static void |
af69fb3a KK |
466 | write_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len) |
467 | { | |
468 | while (len>>2) { | |
b3e0aeeb KK |
469 | writel(cpu_to_le32(*(u32 *)data), |
470 | hc->pci_membase + A_FIFO_DATA0); | |
af69fb3a KK |
471 | data += 4; |
472 | len -= 4; | |
473 | } | |
474 | while (len>>1) { | |
b3e0aeeb KK |
475 | writew(cpu_to_le16(*(u16 *)data), |
476 | hc->pci_membase + A_FIFO_DATA0); | |
af69fb3a KK |
477 | data += 2; |
478 | len -= 2; | |
479 | } | |
480 | while (len) { | |
b3e0aeeb | 481 | writeb(*data, hc->pci_membase + A_FIFO_DATA0); |
af69fb3a KK |
482 | data++; |
483 | len--; | |
484 | } | |
485 | } | |
eac74af9 | 486 | |
af69fb3a | 487 | /* read fifo data (REGIO) */ |
5b834354 | 488 | static void |
af69fb3a KK |
489 | read_fifo_regio(struct hfc_multi *hc, u_char *data, int len) |
490 | { | |
491 | outb(A_FIFO_DATA0, (hc->pci_iobase)+4); | |
492 | while (len>>2) { | |
b3e0aeeb | 493 | *(u32 *)data = le32_to_cpu(inl(hc->pci_iobase)); |
af69fb3a KK |
494 | data += 4; |
495 | len -= 4; | |
496 | } | |
497 | while (len>>1) { | |
b3e0aeeb | 498 | *(u16 *)data = le16_to_cpu(inw(hc->pci_iobase)); |
af69fb3a KK |
499 | data += 2; |
500 | len -= 2; | |
501 | } | |
502 | while (len) { | |
503 | *data = inb(hc->pci_iobase); | |
504 | data++; | |
505 | len--; | |
506 | } | |
507 | } | |
508 | ||
509 | /* read fifo data (PCIMEM) */ | |
5b834354 | 510 | static void |
af69fb3a KK |
511 | read_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len) |
512 | { | |
513 | while (len>>2) { | |
514 | *(u32 *)data = | |
b3e0aeeb | 515 | le32_to_cpu(readl(hc->pci_membase + A_FIFO_DATA0)); |
af69fb3a KK |
516 | data += 4; |
517 | len -= 4; | |
518 | } | |
519 | while (len>>1) { | |
520 | *(u16 *)data = | |
b3e0aeeb | 521 | le16_to_cpu(readw(hc->pci_membase + A_FIFO_DATA0)); |
af69fb3a KK |
522 | data += 2; |
523 | len -= 2; | |
524 | } | |
525 | while (len) { | |
b3e0aeeb | 526 | *data = readb(hc->pci_membase + A_FIFO_DATA0); |
af69fb3a KK |
527 | data++; |
528 | len--; | |
529 | } | |
530 | } | |
531 | ||
af69fb3a KK |
532 | static void |
533 | enable_hwirq(struct hfc_multi *hc) | |
534 | { | |
535 | hc->hw.r_irq_ctrl |= V_GLOB_IRQ_EN; | |
536 | HFC_outb(hc, R_IRQ_CTRL, hc->hw.r_irq_ctrl); | |
537 | } | |
538 | ||
539 | static void | |
540 | disable_hwirq(struct hfc_multi *hc) | |
541 | { | |
542 | hc->hw.r_irq_ctrl &= ~((u_char)V_GLOB_IRQ_EN); | |
543 | HFC_outb(hc, R_IRQ_CTRL, hc->hw.r_irq_ctrl); | |
544 | } | |
545 | ||
546 | #define NUM_EC 2 | |
547 | #define MAX_TDM_CHAN 32 | |
548 | ||
549 | ||
550 | inline void | |
551 | enablepcibridge(struct hfc_multi *c) | |
552 | { | |
553 | HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x3); /* was _io before */ | |
554 | } | |
555 | ||
556 | inline void | |
557 | disablepcibridge(struct hfc_multi *c) | |
558 | { | |
559 | HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x2); /* was _io before */ | |
560 | } | |
561 | ||
562 | inline unsigned char | |
563 | readpcibridge(struct hfc_multi *hc, unsigned char address) | |
564 | { | |
565 | unsigned short cipv; | |
566 | unsigned char data; | |
567 | ||
568 | if (!hc->pci_iobase) | |
569 | return 0; | |
570 | ||
571 | /* slow down a PCI read access by 1 PCI clock cycle */ | |
572 | HFC_outb(hc, R_CTRL, 0x4); /*was _io before*/ | |
573 | ||
574 | if (address == 0) | |
575 | cipv = 0x4000; | |
576 | else | |
577 | cipv = 0x5800; | |
578 | ||
579 | /* select local bridge port address by writing to CIP port */ | |
580 | /* data = HFC_inb(c, cipv); * was _io before */ | |
581 | outw(cipv, hc->pci_iobase + 4); | |
582 | data = inb(hc->pci_iobase); | |
583 | ||
584 | /* restore R_CTRL for normal PCI read cycle speed */ | |
585 | HFC_outb(hc, R_CTRL, 0x0); /* was _io before */ | |
586 | ||
587 | return data; | |
588 | } | |
589 | ||
590 | inline void | |
591 | writepcibridge(struct hfc_multi *hc, unsigned char address, unsigned char data) | |
592 | { | |
593 | unsigned short cipv; | |
594 | unsigned int datav; | |
595 | ||
596 | if (!hc->pci_iobase) | |
597 | return; | |
598 | ||
599 | if (address == 0) | |
600 | cipv = 0x4000; | |
601 | else | |
602 | cipv = 0x5800; | |
603 | ||
604 | /* select local bridge port address by writing to CIP port */ | |
605 | outw(cipv, hc->pci_iobase + 4); | |
606 | /* define a 32 bit dword with 4 identical bytes for write sequence */ | |
607 | datav = data | ((__u32) data << 8) | ((__u32) data << 16) | | |
608 | ((__u32) data << 24); | |
609 | ||
610 | /* | |
611 | * write this 32 bit dword to the bridge data port | |
612 | * this will initiate a write sequence of up to 4 writes to the same | |
613 | * address on the local bus interface the number of write accesses | |
614 | * is undefined but >=1 and depends on the next PCI transaction | |
615 | * during write sequence on the local bus | |
616 | */ | |
617 | outl(datav, hc->pci_iobase); | |
618 | } | |
619 | ||
620 | inline void | |
621 | cpld_set_reg(struct hfc_multi *hc, unsigned char reg) | |
622 | { | |
623 | /* Do data pin read low byte */ | |
624 | HFC_outb(hc, R_GPIO_OUT1, reg); | |
625 | } | |
626 | ||
627 | inline void | |
628 | cpld_write_reg(struct hfc_multi *hc, unsigned char reg, unsigned char val) | |
629 | { | |
630 | cpld_set_reg(hc, reg); | |
631 | ||
632 | enablepcibridge(hc); | |
633 | writepcibridge(hc, 1, val); | |
634 | disablepcibridge(hc); | |
635 | ||
636 | return; | |
637 | } | |
638 | ||
639 | inline unsigned char | |
640 | cpld_read_reg(struct hfc_multi *hc, unsigned char reg) | |
641 | { | |
642 | unsigned char bytein; | |
643 | ||
644 | cpld_set_reg(hc, reg); | |
645 | ||
646 | /* Do data pin read low byte */ | |
647 | HFC_outb(hc, R_GPIO_OUT1, reg); | |
648 | ||
649 | enablepcibridge(hc); | |
650 | bytein = readpcibridge(hc, 1); | |
651 | disablepcibridge(hc); | |
652 | ||
653 | return bytein; | |
654 | } | |
655 | ||
656 | inline void | |
657 | vpm_write_address(struct hfc_multi *hc, unsigned short addr) | |
658 | { | |
659 | cpld_write_reg(hc, 0, 0xff & addr); | |
660 | cpld_write_reg(hc, 1, 0x01 & (addr >> 8)); | |
661 | } | |
662 | ||
663 | inline unsigned short | |
664 | vpm_read_address(struct hfc_multi *c) | |
665 | { | |
666 | unsigned short addr; | |
667 | unsigned short highbit; | |
668 | ||
669 | addr = cpld_read_reg(c, 0); | |
670 | highbit = cpld_read_reg(c, 1); | |
671 | ||
672 | addr = addr | (highbit << 8); | |
673 | ||
674 | return addr & 0x1ff; | |
675 | } | |
676 | ||
677 | inline unsigned char | |
678 | vpm_in(struct hfc_multi *c, int which, unsigned short addr) | |
679 | { | |
680 | unsigned char res; | |
681 | ||
682 | vpm_write_address(c, addr); | |
683 | ||
684 | if (!which) | |
685 | cpld_set_reg(c, 2); | |
686 | else | |
687 | cpld_set_reg(c, 3); | |
688 | ||
689 | enablepcibridge(c); | |
690 | res = readpcibridge(c, 1); | |
691 | disablepcibridge(c); | |
692 | ||
693 | cpld_set_reg(c, 0); | |
694 | ||
695 | return res; | |
696 | } | |
697 | ||
698 | inline void | |
699 | vpm_out(struct hfc_multi *c, int which, unsigned short addr, | |
700 | unsigned char data) | |
701 | { | |
702 | vpm_write_address(c, addr); | |
703 | ||
704 | enablepcibridge(c); | |
705 | ||
706 | if (!which) | |
707 | cpld_set_reg(c, 2); | |
708 | else | |
709 | cpld_set_reg(c, 3); | |
710 | ||
711 | writepcibridge(c, 1, data); | |
712 | ||
713 | cpld_set_reg(c, 0); | |
714 | ||
715 | disablepcibridge(c); | |
716 | ||
717 | { | |
718 | unsigned char regin; | |
719 | regin = vpm_in(c, which, addr); | |
720 | if (regin != data) | |
721 | printk(KERN_DEBUG "Wrote 0x%x to register 0x%x but got back " | |
722 | "0x%x\n", data, addr, regin); | |
723 | } | |
724 | ||
725 | } | |
726 | ||
727 | ||
5b834354 | 728 | static void |
af69fb3a KK |
729 | vpm_init(struct hfc_multi *wc) |
730 | { | |
731 | unsigned char reg; | |
732 | unsigned int mask; | |
733 | unsigned int i, x, y; | |
734 | unsigned int ver; | |
735 | ||
736 | for (x = 0; x < NUM_EC; x++) { | |
737 | /* Setup GPIO's */ | |
738 | if (!x) { | |
739 | ver = vpm_in(wc, x, 0x1a0); | |
740 | printk(KERN_DEBUG "VPM: Chip %d: ver %02x\n", x, ver); | |
741 | } | |
742 | ||
743 | for (y = 0; y < 4; y++) { | |
744 | vpm_out(wc, x, 0x1a8 + y, 0x00); /* GPIO out */ | |
745 | vpm_out(wc, x, 0x1ac + y, 0x00); /* GPIO dir */ | |
746 | vpm_out(wc, x, 0x1b0 + y, 0x00); /* GPIO sel */ | |
747 | } | |
748 | ||
749 | /* Setup TDM path - sets fsync and tdm_clk as inputs */ | |
750 | reg = vpm_in(wc, x, 0x1a3); /* misc_con */ | |
751 | vpm_out(wc, x, 0x1a3, reg & ~2); | |
752 | ||
753 | /* Setup Echo length (256 taps) */ | |
754 | vpm_out(wc, x, 0x022, 1); | |
755 | vpm_out(wc, x, 0x023, 0xff); | |
756 | ||
757 | /* Setup timeslots */ | |
758 | vpm_out(wc, x, 0x02f, 0x00); | |
759 | mask = 0x02020202 << (x * 4); | |
760 | ||
761 | /* Setup the tdm channel masks for all chips */ | |
762 | for (i = 0; i < 4; i++) | |
763 | vpm_out(wc, x, 0x33 - i, (mask >> (i << 3)) & 0xff); | |
764 | ||
765 | /* Setup convergence rate */ | |
766 | printk(KERN_DEBUG "VPM: A-law mode\n"); | |
767 | reg = 0x00 | 0x10 | 0x01; | |
768 | vpm_out(wc, x, 0x20, reg); | |
769 | printk(KERN_DEBUG "VPM reg 0x20 is %x\n", reg); | |
770 | /*vpm_out(wc, x, 0x20, (0x00 | 0x08 | 0x20 | 0x10)); */ | |
771 | ||
772 | vpm_out(wc, x, 0x24, 0x02); | |
773 | reg = vpm_in(wc, x, 0x24); | |
774 | printk(KERN_DEBUG "NLP Thresh is set to %d (0x%x)\n", reg, reg); | |
775 | ||
776 | /* Initialize echo cans */ | |
777 | for (i = 0; i < MAX_TDM_CHAN; i++) { | |
778 | if (mask & (0x00000001 << i)) | |
779 | vpm_out(wc, x, i, 0x00); | |
780 | } | |
781 | ||
782 | /* | |
783 | * ARM arch at least disallows a udelay of | |
784 | * more than 2ms... it gives a fake "__bad_udelay" | |
785 | * reference at link-time. | |
786 | * long delays in kernel code are pretty sucky anyway | |
787 | * for now work around it using 5 x 2ms instead of 1 x 10ms | |
788 | */ | |
789 | ||
790 | udelay(2000); | |
791 | udelay(2000); | |
792 | udelay(2000); | |
793 | udelay(2000); | |
794 | udelay(2000); | |
795 | ||
796 | /* Put in bypass mode */ | |
797 | for (i = 0; i < MAX_TDM_CHAN; i++) { | |
798 | if (mask & (0x00000001 << i)) | |
799 | vpm_out(wc, x, i, 0x01); | |
800 | } | |
801 | ||
802 | /* Enable bypass */ | |
803 | for (i = 0; i < MAX_TDM_CHAN; i++) { | |
804 | if (mask & (0x00000001 << i)) | |
805 | vpm_out(wc, x, 0x78 + i, 0x01); | |
806 | } | |
807 | ||
808 | } | |
809 | } | |
810 | ||
047ce8f2 | 811 | #ifdef UNUSED |
5b834354 | 812 | static void |
af69fb3a KK |
813 | vpm_check(struct hfc_multi *hctmp) |
814 | { | |
815 | unsigned char gpi2; | |
816 | ||
817 | gpi2 = HFC_inb(hctmp, R_GPI_IN2); | |
818 | ||
819 | if ((gpi2 & 0x3) != 0x3) | |
820 | printk(KERN_DEBUG "Got interrupt 0x%x from VPM!\n", gpi2); | |
821 | } | |
047ce8f2 | 822 | #endif /* UNUSED */ |
af69fb3a KK |
823 | |
824 | ||
825 | /* | |
826 | * Interface to enable/disable the HW Echocan | |
827 | * | |
828 | * these functions are called within a spin_lock_irqsave on | |
829 | * the channel instance lock, so we are not disturbed by irqs | |
830 | * | |
831 | * we can later easily change the interface to make other | |
832 | * things configurable, for now we configure the taps | |
833 | * | |
834 | */ | |
835 | ||
5b834354 | 836 | static void |
af69fb3a KK |
837 | vpm_echocan_on(struct hfc_multi *hc, int ch, int taps) |
838 | { | |
839 | unsigned int timeslot; | |
840 | unsigned int unit; | |
841 | struct bchannel *bch = hc->chan[ch].bch; | |
842 | #ifdef TXADJ | |
843 | int txadj = -4; | |
844 | struct sk_buff *skb; | |
845 | #endif | |
846 | if (hc->chan[ch].protocol != ISDN_P_B_RAW) | |
847 | return; | |
848 | ||
849 | if (!bch) | |
850 | return; | |
851 | ||
852 | #ifdef TXADJ | |
853 | skb = _alloc_mISDN_skb(PH_CONTROL_IND, HFC_VOL_CHANGE_TX, | |
854 | sizeof(int), &txadj, GFP_ATOMIC); | |
855 | if (skb) | |
856 | recv_Bchannel_skb(bch, skb); | |
857 | #endif | |
858 | ||
859 | timeslot = ((ch/4)*8) + ((ch%4)*4) + 1; | |
860 | unit = ch % 4; | |
861 | ||
862 | printk(KERN_NOTICE "vpm_echocan_on called taps [%d] on timeslot %d\n", | |
863 | taps, timeslot); | |
864 | ||
865 | vpm_out(hc, unit, timeslot, 0x7e); | |
866 | } | |
867 | ||
5b834354 | 868 | static void |
af69fb3a KK |
869 | vpm_echocan_off(struct hfc_multi *hc, int ch) |
870 | { | |
871 | unsigned int timeslot; | |
872 | unsigned int unit; | |
873 | struct bchannel *bch = hc->chan[ch].bch; | |
874 | #ifdef TXADJ | |
875 | int txadj = 0; | |
876 | struct sk_buff *skb; | |
877 | #endif | |
878 | ||
879 | if (hc->chan[ch].protocol != ISDN_P_B_RAW) | |
880 | return; | |
881 | ||
882 | if (!bch) | |
883 | return; | |
884 | ||
885 | #ifdef TXADJ | |
886 | skb = _alloc_mISDN_skb(PH_CONTROL_IND, HFC_VOL_CHANGE_TX, | |
887 | sizeof(int), &txadj, GFP_ATOMIC); | |
888 | if (skb) | |
889 | recv_Bchannel_skb(bch, skb); | |
890 | #endif | |
891 | ||
892 | timeslot = ((ch/4)*8) + ((ch%4)*4) + 1; | |
893 | unit = ch % 4; | |
894 | ||
895 | printk(KERN_NOTICE "vpm_echocan_off called on timeslot %d\n", | |
896 | timeslot); | |
897 | /* FILLME */ | |
898 | vpm_out(hc, unit, timeslot, 0x01); | |
899 | } | |
900 | ||
901 | ||
902 | /* | |
903 | * Speech Design resync feature | |
904 | * NOTE: This is called sometimes outside interrupt handler. | |
905 | * We must lock irqsave, so no other interrupt (other card) will occurr! | |
906 | * Also multiple interrupts may nest, so must lock each access (lists, card)! | |
907 | */ | |
908 | static inline void | |
909 | hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm) | |
910 | { | |
bcf91745 | 911 | struct hfc_multi *hc, *next, *pcmmaster = NULL; |
c31655fc HE |
912 | void __iomem *plx_acc_32; |
913 | u_int pv; | |
af69fb3a KK |
914 | u_long flags; |
915 | ||
916 | spin_lock_irqsave(&HFClock, flags); | |
917 | spin_lock(&plx_lock); /* must be locked inside other locks */ | |
918 | ||
919 | if (debug & DEBUG_HFCMULTI_PLXSD) | |
920 | printk(KERN_DEBUG "%s: RESYNC(syncmaster=0x%p)\n", | |
921 | __func__, syncmaster); | |
922 | ||
923 | /* select new master */ | |
924 | if (newmaster) { | |
925 | if (debug & DEBUG_HFCMULTI_PLXSD) | |
926 | printk(KERN_DEBUG "using provided controller\n"); | |
927 | } else { | |
928 | list_for_each_entry_safe(hc, next, &HFClist, list) { | |
929 | if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { | |
930 | if (hc->syncronized) { | |
931 | newmaster = hc; | |
932 | break; | |
933 | } | |
934 | } | |
935 | } | |
936 | } | |
937 | ||
938 | /* Disable sync of all cards */ | |
939 | list_for_each_entry_safe(hc, next, &HFClist, list) { | |
940 | if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { | |
c31655fc | 941 | plx_acc_32 = hc->plx_membase + PLX_GPIOC; |
af69fb3a KK |
942 | pv = readl(plx_acc_32); |
943 | pv &= ~PLX_SYNC_O_EN; | |
944 | writel(pv, plx_acc_32); | |
945 | if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)) { | |
946 | pcmmaster = hc; | |
db9bb63a | 947 | if (hc->ctype == HFC_TYPE_E1) { |
af69fb3a KK |
948 | if (debug & DEBUG_HFCMULTI_PLXSD) |
949 | printk(KERN_DEBUG | |
950 | "Schedule SYNC_I\n"); | |
951 | hc->e1_resync |= 1; /* get SYNC_I */ | |
952 | } | |
953 | } | |
954 | } | |
955 | } | |
956 | ||
957 | if (newmaster) { | |
958 | hc = newmaster; | |
959 | if (debug & DEBUG_HFCMULTI_PLXSD) | |
960 | printk(KERN_DEBUG "id=%d (0x%p) = syncronized with " | |
961 | "interface.\n", hc->id, hc); | |
962 | /* Enable new sync master */ | |
c31655fc | 963 | plx_acc_32 = hc->plx_membase + PLX_GPIOC; |
af69fb3a KK |
964 | pv = readl(plx_acc_32); |
965 | pv |= PLX_SYNC_O_EN; | |
966 | writel(pv, plx_acc_32); | |
967 | /* switch to jatt PLL, if not disabled by RX_SYNC */ | |
db9bb63a KK |
968 | if (hc->ctype == HFC_TYPE_E1 |
969 | && !test_bit(HFC_CHIP_RX_SYNC, &hc->chip)) { | |
af69fb3a KK |
970 | if (debug & DEBUG_HFCMULTI_PLXSD) |
971 | printk(KERN_DEBUG "Schedule jatt PLL\n"); | |
972 | hc->e1_resync |= 2; /* switch to jatt */ | |
973 | } | |
974 | } else { | |
975 | if (pcmmaster) { | |
976 | hc = pcmmaster; | |
977 | if (debug & DEBUG_HFCMULTI_PLXSD) | |
978 | printk(KERN_DEBUG | |
979 | "id=%d (0x%p) = PCM master syncronized " | |
980 | "with QUARTZ\n", hc->id, hc); | |
db9bb63a | 981 | if (hc->ctype == HFC_TYPE_E1) { |
af69fb3a KK |
982 | /* Use the crystal clock for the PCM |
983 | master card */ | |
984 | if (debug & DEBUG_HFCMULTI_PLXSD) | |
985 | printk(KERN_DEBUG | |
986 | "Schedule QUARTZ for HFC-E1\n"); | |
987 | hc->e1_resync |= 4; /* switch quartz */ | |
988 | } else { | |
989 | if (debug & DEBUG_HFCMULTI_PLXSD) | |
990 | printk(KERN_DEBUG | |
991 | "QUARTZ is automatically " | |
db9bb63a | 992 | "enabled by HFC-%dS\n", hc->ctype); |
af69fb3a | 993 | } |
c31655fc | 994 | plx_acc_32 = hc->plx_membase + PLX_GPIOC; |
af69fb3a KK |
995 | pv = readl(plx_acc_32); |
996 | pv |= PLX_SYNC_O_EN; | |
997 | writel(pv, plx_acc_32); | |
998 | } else | |
999 | if (!rm) | |
1000 | printk(KERN_ERR "%s no pcm master, this MUST " | |
1001 | "not happen!\n", __func__); | |
1002 | } | |
1003 | syncmaster = newmaster; | |
1004 | ||
1005 | spin_unlock(&plx_lock); | |
1006 | spin_unlock_irqrestore(&HFClock, flags); | |
1007 | } | |
1008 | ||
1009 | /* This must be called AND hc must be locked irqsave!!! */ | |
1010 | inline void | |
1011 | plxsd_checksync(struct hfc_multi *hc, int rm) | |
1012 | { | |
1013 | if (hc->syncronized) { | |
1014 | if (syncmaster == NULL) { | |
1015 | if (debug & DEBUG_HFCMULTI_PLXSD) | |
eac74af9 | 1016 | printk(KERN_DEBUG "%s: GOT sync on card %d" |
af69fb3a KK |
1017 | " (id=%d)\n", __func__, hc->id + 1, |
1018 | hc->id); | |
1019 | hfcmulti_resync(hc, hc, rm); | |
1020 | } | |
1021 | } else { | |
1022 | if (syncmaster == hc) { | |
1023 | if (debug & DEBUG_HFCMULTI_PLXSD) | |
eac74af9 | 1024 | printk(KERN_DEBUG "%s: LOST sync on card %d" |
af69fb3a KK |
1025 | " (id=%d)\n", __func__, hc->id + 1, |
1026 | hc->id); | |
1027 | hfcmulti_resync(hc, NULL, rm); | |
1028 | } | |
1029 | } | |
1030 | } | |
1031 | ||
1032 | ||
1033 | /* | |
1034 | * free hardware resources used by driver | |
1035 | */ | |
1036 | static void | |
1037 | release_io_hfcmulti(struct hfc_multi *hc) | |
1038 | { | |
c31655fc HE |
1039 | void __iomem *plx_acc_32; |
1040 | u_int pv; | |
af69fb3a KK |
1041 | u_long plx_flags; |
1042 | ||
1043 | if (debug & DEBUG_HFCMULTI_INIT) | |
1044 | printk(KERN_DEBUG "%s: entered\n", __func__); | |
1045 | ||
1046 | /* soft reset also masks all interrupts */ | |
1047 | hc->hw.r_cirm |= V_SRES; | |
1048 | HFC_outb(hc, R_CIRM, hc->hw.r_cirm); | |
1049 | udelay(1000); | |
1050 | hc->hw.r_cirm &= ~V_SRES; | |
1051 | HFC_outb(hc, R_CIRM, hc->hw.r_cirm); | |
1052 | udelay(1000); /* instead of 'wait' that may cause locking */ | |
1053 | ||
1054 | /* release Speech Design card, if PLX was initialized */ | |
1055 | if (test_bit(HFC_CHIP_PLXSD, &hc->chip) && hc->plx_membase) { | |
1056 | if (debug & DEBUG_HFCMULTI_PLXSD) | |
1057 | printk(KERN_DEBUG "%s: release PLXSD card %d\n", | |
1058 | __func__, hc->id + 1); | |
1059 | spin_lock_irqsave(&plx_lock, plx_flags); | |
c31655fc | 1060 | plx_acc_32 = hc->plx_membase + PLX_GPIOC; |
af69fb3a KK |
1061 | writel(PLX_GPIOC_INIT, plx_acc_32); |
1062 | pv = readl(plx_acc_32); | |
1063 | /* Termination off */ | |
1064 | pv &= ~PLX_TERM_ON; | |
1065 | /* Disconnect the PCM */ | |
1066 | pv |= PLX_SLAVE_EN_N; | |
1067 | pv &= ~PLX_MASTER_EN; | |
1068 | pv &= ~PLX_SYNC_O_EN; | |
1069 | /* Put the DSP in Reset */ | |
1070 | pv &= ~PLX_DSP_RES_N; | |
1071 | writel(pv, plx_acc_32); | |
1072 | if (debug & DEBUG_HFCMULTI_INIT) | |
eac74af9 | 1073 | printk(KERN_DEBUG "%s: PCM off: PLX_GPIO=%x\n", |
af69fb3a KK |
1074 | __func__, pv); |
1075 | spin_unlock_irqrestore(&plx_lock, plx_flags); | |
1076 | } | |
1077 | ||
1078 | /* disable memory mapped ports / io ports */ | |
1079 | test_and_clear_bit(HFC_CHIP_PLXSD, &hc->chip); /* prevent resync */ | |
db9bb63a KK |
1080 | if (hc->pci_dev) |
1081 | pci_write_config_word(hc->pci_dev, PCI_COMMAND, 0); | |
af69fb3a | 1082 | if (hc->pci_membase) |
c31655fc | 1083 | iounmap(hc->pci_membase); |
af69fb3a | 1084 | if (hc->plx_membase) |
c31655fc | 1085 | iounmap(hc->plx_membase); |
af69fb3a KK |
1086 | if (hc->pci_iobase) |
1087 | release_region(hc->pci_iobase, 8); | |
db9bb63a KK |
1088 | if (hc->xhfc_membase) |
1089 | iounmap((void *)hc->xhfc_membase); | |
af69fb3a KK |
1090 | |
1091 | if (hc->pci_dev) { | |
1092 | pci_disable_device(hc->pci_dev); | |
1093 | pci_set_drvdata(hc->pci_dev, NULL); | |
1094 | } | |
1095 | if (debug & DEBUG_HFCMULTI_INIT) | |
1096 | printk(KERN_DEBUG "%s: done\n", __func__); | |
1097 | } | |
1098 | ||
1099 | /* | |
1100 | * function called to reset the HFC chip. A complete software reset of chip | |
1101 | * and fifos is done. All configuration of the chip is done. | |
1102 | */ | |
1103 | ||
1104 | static int | |
1105 | init_chip(struct hfc_multi *hc) | |
1106 | { | |
1107 | u_long flags, val, val2 = 0, rev; | |
1108 | int i, err = 0; | |
1109 | u_char r_conf_en, rval; | |
c31655fc HE |
1110 | void __iomem *plx_acc_32; |
1111 | u_int pv; | |
af69fb3a KK |
1112 | u_long plx_flags, hfc_flags; |
1113 | int plx_count; | |
1114 | struct hfc_multi *pos, *next, *plx_last_hc; | |
1115 | ||
1116 | spin_lock_irqsave(&hc->lock, flags); | |
1117 | /* reset all registers */ | |
1118 | memset(&hc->hw, 0, sizeof(struct hfcm_hw)); | |
1119 | ||
1120 | /* revision check */ | |
1121 | if (debug & DEBUG_HFCMULTI_INIT) | |
1122 | printk(KERN_DEBUG "%s: entered\n", __func__); | |
db9bb63a | 1123 | val = HFC_inb(hc, R_CHIP_ID); |
eac74af9 KK |
1124 | if ((val >> 4) != 0x8 && (val >> 4) != 0xc && (val >> 4) != 0xe && |
1125 | (val >> 1) != 0x31) { | |
af69fb3a KK |
1126 | printk(KERN_INFO "HFC_multi: unknown CHIP_ID:%x\n", (u_int)val); |
1127 | err = -EIO; | |
1128 | goto out; | |
1129 | } | |
1130 | rev = HFC_inb(hc, R_CHIP_RV); | |
1131 | printk(KERN_INFO | |
1132 | "HFC_multi: detected HFC with chip ID=0x%lx revision=%ld%s\n", | |
db9bb63a KK |
1133 | val, rev, (rev == 0 && (hc->ctype != HFC_TYPE_XHFC)) ? |
1134 | " (old FIFO handling)" : ""); | |
1135 | if (hc->ctype != HFC_TYPE_XHFC && rev == 0) { | |
af69fb3a KK |
1136 | test_and_set_bit(HFC_CHIP_REVISION0, &hc->chip); |
1137 | printk(KERN_WARNING | |
1138 | "HFC_multi: NOTE: Your chip is revision 0, " | |
1139 | "ask Cologne Chip for update. Newer chips " | |
1140 | "have a better FIFO handling. Old chips " | |
1141 | "still work but may have slightly lower " | |
1142 | "HDLC transmit performance.\n"); | |
1143 | } | |
1144 | if (rev > 1) { | |
1145 | printk(KERN_WARNING "HFC_multi: WARNING: This driver doesn't " | |
1146 | "consider chip revision = %ld. The chip / " | |
1147 | "bridge may not work.\n", rev); | |
1148 | } | |
1149 | ||
1150 | /* set s-ram size */ | |
1151 | hc->Flen = 0x10; | |
1152 | hc->Zmin = 0x80; | |
1153 | hc->Zlen = 384; | |
1154 | hc->DTMFbase = 0x1000; | |
1155 | if (test_bit(HFC_CHIP_EXRAM_128, &hc->chip)) { | |
1156 | if (debug & DEBUG_HFCMULTI_INIT) | |
1157 | printk(KERN_DEBUG "%s: changing to 128K extenal RAM\n", | |
1158 | __func__); | |
1159 | hc->hw.r_ctrl |= V_EXT_RAM; | |
1160 | hc->hw.r_ram_sz = 1; | |
1161 | hc->Flen = 0x20; | |
1162 | hc->Zmin = 0xc0; | |
1163 | hc->Zlen = 1856; | |
1164 | hc->DTMFbase = 0x2000; | |
1165 | } | |
1166 | if (test_bit(HFC_CHIP_EXRAM_512, &hc->chip)) { | |
1167 | if (debug & DEBUG_HFCMULTI_INIT) | |
1168 | printk(KERN_DEBUG "%s: changing to 512K extenal RAM\n", | |
1169 | __func__); | |
1170 | hc->hw.r_ctrl |= V_EXT_RAM; | |
1171 | hc->hw.r_ram_sz = 2; | |
1172 | hc->Flen = 0x20; | |
1173 | hc->Zmin = 0xc0; | |
1174 | hc->Zlen = 8000; | |
1175 | hc->DTMFbase = 0x2000; | |
1176 | } | |
db9bb63a KK |
1177 | if (hc->ctype == HFC_TYPE_XHFC) { |
1178 | hc->Flen = 0x8; | |
1179 | hc->Zmin = 0x0; | |
1180 | hc->Zlen = 64; | |
1181 | hc->DTMFbase = 0x0; | |
1182 | } | |
af69fb3a KK |
1183 | hc->max_trans = poll << 1; |
1184 | if (hc->max_trans > hc->Zlen) | |
1185 | hc->max_trans = hc->Zlen; | |
1186 | ||
1187 | /* Speech Design PLX bridge */ | |
1188 | if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { | |
1189 | if (debug & DEBUG_HFCMULTI_PLXSD) | |
1190 | printk(KERN_DEBUG "%s: initializing PLXSD card %d\n", | |
1191 | __func__, hc->id + 1); | |
1192 | spin_lock_irqsave(&plx_lock, plx_flags); | |
c31655fc | 1193 | plx_acc_32 = hc->plx_membase + PLX_GPIOC; |
af69fb3a KK |
1194 | writel(PLX_GPIOC_INIT, plx_acc_32); |
1195 | pv = readl(plx_acc_32); | |
1196 | /* The first and the last cards are terminating the PCM bus */ | |
1197 | pv |= PLX_TERM_ON; /* hc is currently the last */ | |
1198 | /* Disconnect the PCM */ | |
1199 | pv |= PLX_SLAVE_EN_N; | |
1200 | pv &= ~PLX_MASTER_EN; | |
1201 | pv &= ~PLX_SYNC_O_EN; | |
1202 | /* Put the DSP in Reset */ | |
1203 | pv &= ~PLX_DSP_RES_N; | |
1204 | writel(pv, plx_acc_32); | |
1205 | spin_unlock_irqrestore(&plx_lock, plx_flags); | |
1206 | if (debug & DEBUG_HFCMULTI_INIT) | |
eac74af9 | 1207 | printk(KERN_DEBUG "%s: slave/term: PLX_GPIO=%x\n", |
af69fb3a KK |
1208 | __func__, pv); |
1209 | /* | |
1210 | * If we are the 3rd PLXSD card or higher, we must turn | |
1211 | * termination of last PLXSD card off. | |
1212 | */ | |
1213 | spin_lock_irqsave(&HFClock, hfc_flags); | |
1214 | plx_count = 0; | |
1215 | plx_last_hc = NULL; | |
1216 | list_for_each_entry_safe(pos, next, &HFClist, list) { | |
1217 | if (test_bit(HFC_CHIP_PLXSD, &pos->chip)) { | |
1218 | plx_count++; | |
1219 | if (pos != hc) | |
1220 | plx_last_hc = pos; | |
1221 | } | |
1222 | } | |
1223 | if (plx_count >= 3) { | |
1224 | if (debug & DEBUG_HFCMULTI_PLXSD) | |
1225 | printk(KERN_DEBUG "%s: card %d is between, so " | |
1226 | "we disable termination\n", | |
1227 | __func__, plx_last_hc->id + 1); | |
1228 | spin_lock_irqsave(&plx_lock, plx_flags); | |
c31655fc | 1229 | plx_acc_32 = plx_last_hc->plx_membase + PLX_GPIOC; |
af69fb3a KK |
1230 | pv = readl(plx_acc_32); |
1231 | pv &= ~PLX_TERM_ON; | |
1232 | writel(pv, plx_acc_32); | |
1233 | spin_unlock_irqrestore(&plx_lock, plx_flags); | |
1234 | if (debug & DEBUG_HFCMULTI_INIT) | |
eac74af9 KK |
1235 | printk(KERN_DEBUG |
1236 | "%s: term off: PLX_GPIO=%x\n", | |
1237 | __func__, pv); | |
af69fb3a KK |
1238 | } |
1239 | spin_unlock_irqrestore(&HFClock, hfc_flags); | |
1240 | hc->hw.r_pcm_md0 = V_F0_LEN; /* shift clock for DSP */ | |
1241 | } | |
1242 | ||
db9bb63a KK |
1243 | if (test_bit(HFC_CHIP_EMBSD, &hc->chip)) |
1244 | hc->hw.r_pcm_md0 = V_F0_LEN; /* shift clock for DSP */ | |
1245 | ||
af69fb3a KK |
1246 | /* we only want the real Z2 read-pointer for revision > 0 */ |
1247 | if (!test_bit(HFC_CHIP_REVISION0, &hc->chip)) | |
1248 | hc->hw.r_ram_sz |= V_FZ_MD; | |
1249 | ||
1250 | /* select pcm mode */ | |
1251 | if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) { | |
1252 | if (debug & DEBUG_HFCMULTI_INIT) | |
1253 | printk(KERN_DEBUG "%s: setting PCM into slave mode\n", | |
1254 | __func__); | |
1255 | } else | |
1256 | if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip) && !plxsd_master) { | |
1257 | if (debug & DEBUG_HFCMULTI_INIT) | |
1258 | printk(KERN_DEBUG "%s: setting PCM into master mode\n", | |
1259 | __func__); | |
1260 | hc->hw.r_pcm_md0 |= V_PCM_MD; | |
1261 | } else { | |
1262 | if (debug & DEBUG_HFCMULTI_INIT) | |
1263 | printk(KERN_DEBUG "%s: performing PCM auto detect\n", | |
1264 | __func__); | |
1265 | } | |
1266 | ||
1267 | /* soft reset */ | |
1268 | HFC_outb(hc, R_CTRL, hc->hw.r_ctrl); | |
db9bb63a KK |
1269 | if (hc->ctype == HFC_TYPE_XHFC) |
1270 | HFC_outb(hc, 0x0C /* R_FIFO_THRES */, | |
1271 | 0x11 /* 16 Bytes TX/RX */); | |
1272 | else | |
1273 | HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz); | |
af69fb3a | 1274 | HFC_outb(hc, R_FIFO_MD, 0); |
db9bb63a KK |
1275 | if (hc->ctype == HFC_TYPE_XHFC) |
1276 | hc->hw.r_cirm = V_SRES | V_HFCRES | V_PCMRES | V_STRES; | |
1277 | else | |
1278 | hc->hw.r_cirm = V_SRES | V_HFCRES | V_PCMRES | V_STRES | |
1279 | | V_RLD_EPR; | |
af69fb3a KK |
1280 | HFC_outb(hc, R_CIRM, hc->hw.r_cirm); |
1281 | udelay(100); | |
1282 | hc->hw.r_cirm = 0; | |
1283 | HFC_outb(hc, R_CIRM, hc->hw.r_cirm); | |
1284 | udelay(100); | |
db9bb63a KK |
1285 | if (hc->ctype != HFC_TYPE_XHFC) |
1286 | HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz); | |
af69fb3a KK |
1287 | |
1288 | /* Speech Design PLX bridge pcm and sync mode */ | |
1289 | if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { | |
1290 | spin_lock_irqsave(&plx_lock, plx_flags); | |
c31655fc | 1291 | plx_acc_32 = hc->plx_membase + PLX_GPIOC; |
af69fb3a KK |
1292 | pv = readl(plx_acc_32); |
1293 | /* Connect PCM */ | |
1294 | if (hc->hw.r_pcm_md0 & V_PCM_MD) { | |
1295 | pv |= PLX_MASTER_EN | PLX_SLAVE_EN_N; | |
1296 | pv |= PLX_SYNC_O_EN; | |
1297 | if (debug & DEBUG_HFCMULTI_INIT) | |
eac74af9 | 1298 | printk(KERN_DEBUG "%s: master: PLX_GPIO=%x\n", |
af69fb3a KK |
1299 | __func__, pv); |
1300 | } else { | |
1301 | pv &= ~(PLX_MASTER_EN | PLX_SLAVE_EN_N); | |
1302 | pv &= ~PLX_SYNC_O_EN; | |
1303 | if (debug & DEBUG_HFCMULTI_INIT) | |
eac74af9 | 1304 | printk(KERN_DEBUG "%s: slave: PLX_GPIO=%x\n", |
af69fb3a KK |
1305 | __func__, pv); |
1306 | } | |
1307 | writel(pv, plx_acc_32); | |
1308 | spin_unlock_irqrestore(&plx_lock, plx_flags); | |
1309 | } | |
1310 | ||
1311 | /* PCM setup */ | |
1312 | HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x90); | |
1313 | if (hc->slots == 32) | |
1314 | HFC_outb(hc, R_PCM_MD1, 0x00); | |
1315 | if (hc->slots == 64) | |
1316 | HFC_outb(hc, R_PCM_MD1, 0x10); | |
1317 | if (hc->slots == 128) | |
1318 | HFC_outb(hc, R_PCM_MD1, 0x20); | |
1319 | HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0xa0); | |
1320 | if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) | |
1321 | HFC_outb(hc, R_PCM_MD2, V_SYNC_SRC); /* sync via SYNC_I / O */ | |
db9bb63a KK |
1322 | else if (test_bit(HFC_CHIP_EMBSD, &hc->chip)) |
1323 | HFC_outb(hc, R_PCM_MD2, 0x10); /* V_C2O_EN */ | |
af69fb3a KK |
1324 | else |
1325 | HFC_outb(hc, R_PCM_MD2, 0x00); /* sync from interface */ | |
1326 | HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x00); | |
1327 | for (i = 0; i < 256; i++) { | |
1328 | HFC_outb_nodebug(hc, R_SLOT, i); | |
1329 | HFC_outb_nodebug(hc, A_SL_CFG, 0); | |
db9bb63a KK |
1330 | if (hc->ctype != HFC_TYPE_XHFC) |
1331 | HFC_outb_nodebug(hc, A_CONF, 0); | |
af69fb3a KK |
1332 | hc->slot_owner[i] = -1; |
1333 | } | |
1334 | ||
1335 | /* set clock speed */ | |
1336 | if (test_bit(HFC_CHIP_CLOCK2, &hc->chip)) { | |
1337 | if (debug & DEBUG_HFCMULTI_INIT) | |
1338 | printk(KERN_DEBUG | |
1339 | "%s: setting double clock\n", __func__); | |
1340 | HFC_outb(hc, R_BRG_PCM_CFG, V_PCM_CLK); | |
1341 | } | |
1342 | ||
db9bb63a KK |
1343 | if (test_bit(HFC_CHIP_EMBSD, &hc->chip)) |
1344 | HFC_outb(hc, 0x02 /* R_CLK_CFG */, 0x40 /* V_CLKO_OFF */); | |
1345 | ||
af69fb3a KK |
1346 | /* B410P GPIO */ |
1347 | if (test_bit(HFC_CHIP_B410P, &hc->chip)) { | |
1348 | printk(KERN_NOTICE "Setting GPIOs\n"); | |
1349 | HFC_outb(hc, R_GPIO_SEL, 0x30); | |
1350 | HFC_outb(hc, R_GPIO_EN1, 0x3); | |
1351 | udelay(1000); | |
1352 | printk(KERN_NOTICE "calling vpm_init\n"); | |
1353 | vpm_init(hc); | |
1354 | } | |
1355 | ||
1356 | /* check if R_F0_CNT counts (8 kHz frame count) */ | |
1357 | val = HFC_inb(hc, R_F0_CNTL); | |
1358 | val += HFC_inb(hc, R_F0_CNTH) << 8; | |
1359 | if (debug & DEBUG_HFCMULTI_INIT) | |
1360 | printk(KERN_DEBUG | |
1361 | "HFC_multi F0_CNT %ld after reset\n", val); | |
1362 | spin_unlock_irqrestore(&hc->lock, flags); | |
1363 | set_current_state(TASK_UNINTERRUPTIBLE); | |
1364 | schedule_timeout((HZ/100)?:1); /* Timeout minimum 10ms */ | |
1365 | spin_lock_irqsave(&hc->lock, flags); | |
1366 | val2 = HFC_inb(hc, R_F0_CNTL); | |
1367 | val2 += HFC_inb(hc, R_F0_CNTH) << 8; | |
1368 | if (debug & DEBUG_HFCMULTI_INIT) | |
1369 | printk(KERN_DEBUG | |
1370 | "HFC_multi F0_CNT %ld after 10 ms (1st try)\n", | |
1371 | val2); | |
1372 | if (val2 >= val+8) { /* 1 ms */ | |
1373 | /* it counts, so we keep the pcm mode */ | |
1374 | if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)) | |
1375 | printk(KERN_INFO "controller is PCM bus MASTER\n"); | |
1376 | else | |
1377 | if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) | |
1378 | printk(KERN_INFO "controller is PCM bus SLAVE\n"); | |
1379 | else { | |
1380 | test_and_set_bit(HFC_CHIP_PCM_SLAVE, &hc->chip); | |
1381 | printk(KERN_INFO "controller is PCM bus SLAVE " | |
1382 | "(auto detected)\n"); | |
1383 | } | |
1384 | } else { | |
1385 | /* does not count */ | |
1386 | if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)) { | |
1387 | controller_fail: | |
1388 | printk(KERN_ERR "HFC_multi ERROR, getting no 125us " | |
1389 | "pulse. Seems that controller fails.\n"); | |
1390 | err = -EIO; | |
1391 | goto out; | |
1392 | } | |
1393 | if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) { | |
1394 | printk(KERN_INFO "controller is PCM bus SLAVE " | |
1395 | "(ignoring missing PCM clock)\n"); | |
1396 | } else { | |
1397 | /* only one pcm master */ | |
1398 | if (test_bit(HFC_CHIP_PLXSD, &hc->chip) | |
1399 | && plxsd_master) { | |
1400 | printk(KERN_ERR "HFC_multi ERROR, no clock " | |
1401 | "on another Speech Design card found. " | |
1402 | "Please be sure to connect PCM cable.\n"); | |
1403 | err = -EIO; | |
1404 | goto out; | |
1405 | } | |
1406 | /* retry with master clock */ | |
1407 | if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { | |
1408 | spin_lock_irqsave(&plx_lock, plx_flags); | |
c31655fc | 1409 | plx_acc_32 = hc->plx_membase + PLX_GPIOC; |
af69fb3a KK |
1410 | pv = readl(plx_acc_32); |
1411 | pv |= PLX_MASTER_EN | PLX_SLAVE_EN_N; | |
1412 | pv |= PLX_SYNC_O_EN; | |
1413 | writel(pv, plx_acc_32); | |
1414 | spin_unlock_irqrestore(&plx_lock, plx_flags); | |
1415 | if (debug & DEBUG_HFCMULTI_INIT) | |
eac74af9 KK |
1416 | printk(KERN_DEBUG "%s: master: " |
1417 | "PLX_GPIO=%x\n", __func__, pv); | |
af69fb3a KK |
1418 | } |
1419 | hc->hw.r_pcm_md0 |= V_PCM_MD; | |
1420 | HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x00); | |
1421 | spin_unlock_irqrestore(&hc->lock, flags); | |
1422 | set_current_state(TASK_UNINTERRUPTIBLE); | |
1423 | schedule_timeout((HZ/100)?:1); /* Timeout min. 10ms */ | |
1424 | spin_lock_irqsave(&hc->lock, flags); | |
1425 | val2 = HFC_inb(hc, R_F0_CNTL); | |
1426 | val2 += HFC_inb(hc, R_F0_CNTH) << 8; | |
1427 | if (debug & DEBUG_HFCMULTI_INIT) | |
1428 | printk(KERN_DEBUG "HFC_multi F0_CNT %ld after " | |
1429 | "10 ms (2nd try)\n", val2); | |
1430 | if (val2 >= val+8) { /* 1 ms */ | |
1431 | test_and_set_bit(HFC_CHIP_PCM_MASTER, | |
1432 | &hc->chip); | |
1433 | printk(KERN_INFO "controller is PCM bus MASTER " | |
1434 | "(auto detected)\n"); | |
1435 | } else | |
1436 | goto controller_fail; | |
1437 | } | |
1438 | } | |
1439 | ||
1440 | /* Release the DSP Reset */ | |
1441 | if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { | |
1442 | if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)) | |
1443 | plxsd_master = 1; | |
1444 | spin_lock_irqsave(&plx_lock, plx_flags); | |
c31655fc | 1445 | plx_acc_32 = hc->plx_membase + PLX_GPIOC; |
af69fb3a KK |
1446 | pv = readl(plx_acc_32); |
1447 | pv |= PLX_DSP_RES_N; | |
1448 | writel(pv, plx_acc_32); | |
1449 | spin_unlock_irqrestore(&plx_lock, plx_flags); | |
1450 | if (debug & DEBUG_HFCMULTI_INIT) | |
eac74af9 | 1451 | printk(KERN_DEBUG "%s: reset off: PLX_GPIO=%x\n", |
af69fb3a KK |
1452 | __func__, pv); |
1453 | } | |
1454 | ||
1455 | /* pcm id */ | |
1456 | if (hc->pcm) | |
1457 | printk(KERN_INFO "controller has given PCM BUS ID %d\n", | |
1458 | hc->pcm); | |
1459 | else { | |
1460 | if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip) | |
1461 | || test_bit(HFC_CHIP_PLXSD, &hc->chip)) { | |
1462 | PCM_cnt++; /* SD has proprietary bridging */ | |
1463 | } | |
1464 | hc->pcm = PCM_cnt; | |
1465 | printk(KERN_INFO "controller has PCM BUS ID %d " | |
1466 | "(auto selected)\n", hc->pcm); | |
1467 | } | |
1468 | ||
1469 | /* set up timer */ | |
1470 | HFC_outb(hc, R_TI_WD, poll_timer); | |
1471 | hc->hw.r_irqmsk_misc |= V_TI_IRQMSK; | |
1472 | ||
af69fb3a | 1473 | /* set E1 state machine IRQ */ |
db9bb63a | 1474 | if (hc->ctype == HFC_TYPE_E1) |
af69fb3a KK |
1475 | hc->hw.r_irqmsk_misc |= V_STA_IRQMSK; |
1476 | ||
1477 | /* set DTMF detection */ | |
1478 | if (test_bit(HFC_CHIP_DTMF, &hc->chip)) { | |
1479 | if (debug & DEBUG_HFCMULTI_INIT) | |
1480 | printk(KERN_DEBUG "%s: enabling DTMF detection " | |
1481 | "for all B-channel\n", __func__); | |
1482 | hc->hw.r_dtmf = V_DTMF_EN | V_DTMF_STOP; | |
1483 | if (test_bit(HFC_CHIP_ULAW, &hc->chip)) | |
1484 | hc->hw.r_dtmf |= V_ULAW_SEL; | |
1485 | HFC_outb(hc, R_DTMF_N, 102 - 1); | |
1486 | hc->hw.r_irqmsk_misc |= V_DTMF_IRQMSK; | |
1487 | } | |
1488 | ||
1489 | /* conference engine */ | |
1490 | if (test_bit(HFC_CHIP_ULAW, &hc->chip)) | |
1491 | r_conf_en = V_CONF_EN | V_ULAW; | |
1492 | else | |
1493 | r_conf_en = V_CONF_EN; | |
db9bb63a KK |
1494 | if (hc->ctype != HFC_TYPE_XHFC) |
1495 | HFC_outb(hc, R_CONF_EN, r_conf_en); | |
af69fb3a KK |
1496 | |
1497 | /* setting leds */ | |
1498 | switch (hc->leds) { | |
1499 | case 1: /* HFC-E1 OEM */ | |
1500 | if (test_bit(HFC_CHIP_WATCHDOG, &hc->chip)) | |
1501 | HFC_outb(hc, R_GPIO_SEL, 0x32); | |
1502 | else | |
1503 | HFC_outb(hc, R_GPIO_SEL, 0x30); | |
1504 | ||
1505 | HFC_outb(hc, R_GPIO_EN1, 0x0f); | |
1506 | HFC_outb(hc, R_GPIO_OUT1, 0x00); | |
1507 | ||
1508 | HFC_outb(hc, R_GPIO_EN0, V_GPIO_EN2 | V_GPIO_EN3); | |
1509 | break; | |
1510 | ||
1511 | case 2: /* HFC-4S OEM */ | |
1512 | case 3: | |
1513 | HFC_outb(hc, R_GPIO_SEL, 0xf0); | |
1514 | HFC_outb(hc, R_GPIO_EN1, 0xff); | |
1515 | HFC_outb(hc, R_GPIO_OUT1, 0x00); | |
1516 | break; | |
1517 | } | |
1518 | ||
db9bb63a KK |
1519 | if (test_bit(HFC_CHIP_EMBSD, &hc->chip)) { |
1520 | hc->hw.r_st_sync = 0x10; /* V_AUTO_SYNCI */ | |
1521 | HFC_outb(hc, R_ST_SYNC, hc->hw.r_st_sync); | |
1522 | } | |
1523 | ||
af69fb3a KK |
1524 | /* set master clock */ |
1525 | if (hc->masterclk >= 0) { | |
1526 | if (debug & DEBUG_HFCMULTI_INIT) | |
1527 | printk(KERN_DEBUG "%s: setting ST master clock " | |
1528 | "to port %d (0..%d)\n", | |
1529 | __func__, hc->masterclk, hc->ports-1); | |
db9bb63a | 1530 | hc->hw.r_st_sync |= (hc->masterclk | V_AUTO_SYNC); |
af69fb3a KK |
1531 | HFC_outb(hc, R_ST_SYNC, hc->hw.r_st_sync); |
1532 | } | |
1533 | ||
db9bb63a KK |
1534 | |
1535 | ||
af69fb3a KK |
1536 | /* setting misc irq */ |
1537 | HFC_outb(hc, R_IRQMSK_MISC, hc->hw.r_irqmsk_misc); | |
1538 | if (debug & DEBUG_HFCMULTI_INIT) | |
1539 | printk(KERN_DEBUG "r_irqmsk_misc.2: 0x%x\n", | |
1540 | hc->hw.r_irqmsk_misc); | |
1541 | ||
1542 | /* RAM access test */ | |
1543 | HFC_outb(hc, R_RAM_ADDR0, 0); | |
1544 | HFC_outb(hc, R_RAM_ADDR1, 0); | |
1545 | HFC_outb(hc, R_RAM_ADDR2, 0); | |
1546 | for (i = 0; i < 256; i++) { | |
1547 | HFC_outb_nodebug(hc, R_RAM_ADDR0, i); | |
1548 | HFC_outb_nodebug(hc, R_RAM_DATA, ((i*3)&0xff)); | |
1549 | } | |
1550 | for (i = 0; i < 256; i++) { | |
1551 | HFC_outb_nodebug(hc, R_RAM_ADDR0, i); | |
1552 | HFC_inb_nodebug(hc, R_RAM_DATA); | |
1553 | rval = HFC_inb_nodebug(hc, R_INT_DATA); | |
1554 | if (rval != ((i * 3) & 0xff)) { | |
1555 | printk(KERN_DEBUG | |
1556 | "addr:%x val:%x should:%x\n", i, rval, | |
1557 | (i * 3) & 0xff); | |
1558 | err++; | |
1559 | } | |
1560 | } | |
1561 | if (err) { | |
1562 | printk(KERN_DEBUG "aborting - %d RAM access errors\n", err); | |
1563 | err = -EIO; | |
1564 | goto out; | |
1565 | } | |
1566 | ||
1567 | if (debug & DEBUG_HFCMULTI_INIT) | |
1568 | printk(KERN_DEBUG "%s: done\n", __func__); | |
1569 | out: | |
1570 | spin_unlock_irqrestore(&hc->lock, flags); | |
1571 | return err; | |
1572 | } | |
1573 | ||
1574 | ||
1575 | /* | |
1576 | * control the watchdog | |
1577 | */ | |
1578 | static void | |
1579 | hfcmulti_watchdog(struct hfc_multi *hc) | |
1580 | { | |
1581 | hc->wdcount++; | |
1582 | ||
1583 | if (hc->wdcount > 10) { | |
1584 | hc->wdcount = 0; | |
1585 | hc->wdbyte = hc->wdbyte == V_GPIO_OUT2 ? | |
1586 | V_GPIO_OUT3 : V_GPIO_OUT2; | |
1587 | ||
1588 | /* printk("Sending Watchdog Kill %x\n",hc->wdbyte); */ | |
1589 | HFC_outb(hc, R_GPIO_EN0, V_GPIO_EN2 | V_GPIO_EN3); | |
1590 | HFC_outb(hc, R_GPIO_OUT0, hc->wdbyte); | |
1591 | } | |
1592 | } | |
1593 | ||
1594 | ||
1595 | ||
1596 | /* | |
1597 | * output leds | |
1598 | */ | |
1599 | static void | |
1600 | hfcmulti_leds(struct hfc_multi *hc) | |
1601 | { | |
1602 | unsigned long lled; | |
1603 | unsigned long leddw; | |
1604 | int i, state, active, leds; | |
1605 | struct dchannel *dch; | |
1606 | int led[4]; | |
1607 | ||
1608 | hc->ledcount += poll; | |
1609 | if (hc->ledcount > 4096) { | |
1610 | hc->ledcount -= 4096; | |
1611 | hc->ledstate = 0xAFFEAFFE; | |
1612 | } | |
1613 | ||
1614 | switch (hc->leds) { | |
1615 | case 1: /* HFC-E1 OEM */ | |
1616 | /* 2 red blinking: NT mode deactivate | |
1617 | * 2 red steady: TE mode deactivate | |
1618 | * left green: L1 active | |
1619 | * left red: frame sync, but no L1 | |
1620 | * right green: L2 active | |
1621 | */ | |
1622 | if (hc->chan[hc->dslot].sync != 2) { /* no frame sync */ | |
1623 | if (hc->chan[hc->dslot].dch->dev.D.protocol | |
1624 | != ISDN_P_NT_E1) { | |
1625 | led[0] = 1; | |
1626 | led[1] = 1; | |
1627 | } else if (hc->ledcount>>11) { | |
1628 | led[0] = 1; | |
1629 | led[1] = 1; | |
1630 | } else { | |
1631 | led[0] = 0; | |
1632 | led[1] = 0; | |
1633 | } | |
1634 | led[2] = 0; | |
1635 | led[3] = 0; | |
1636 | } else { /* with frame sync */ | |
1637 | /* TODO make it work */ | |
1638 | led[0] = 0; | |
1639 | led[1] = 0; | |
1640 | led[2] = 0; | |
1641 | led[3] = 1; | |
1642 | } | |
1643 | leds = (led[0] | (led[1]<<2) | (led[2]<<1) | (led[3]<<3))^0xF; | |
1644 | /* leds are inverted */ | |
1645 | if (leds != (int)hc->ledstate) { | |
1646 | HFC_outb_nodebug(hc, R_GPIO_OUT1, leds); | |
1647 | hc->ledstate = leds; | |
1648 | } | |
1649 | break; | |
1650 | ||
1651 | case 2: /* HFC-4S OEM */ | |
1652 | /* red blinking = PH_DEACTIVATE NT Mode | |
1653 | * red steady = PH_DEACTIVATE TE Mode | |
1654 | * green steady = PH_ACTIVATE | |
1655 | */ | |
1656 | for (i = 0; i < 4; i++) { | |
1657 | state = 0; | |
1658 | active = -1; | |
1659 | dch = hc->chan[(i << 2) | 2].dch; | |
1660 | if (dch) { | |
1661 | state = dch->state; | |
1662 | if (dch->dev.D.protocol == ISDN_P_NT_S0) | |
1663 | active = 3; | |
1664 | else | |
1665 | active = 7; | |
1666 | } | |
1667 | if (state) { | |
1668 | if (state == active) { | |
1669 | led[i] = 1; /* led green */ | |
1670 | } else | |
1671 | if (dch->dev.D.protocol == ISDN_P_TE_S0) | |
1672 | /* TE mode: led red */ | |
1673 | led[i] = 2; | |
1674 | else | |
1675 | if (hc->ledcount>>11) | |
1676 | /* led red */ | |
1677 | led[i] = 2; | |
1678 | else | |
1679 | /* led off */ | |
1680 | led[i] = 0; | |
1681 | } else | |
1682 | led[i] = 0; /* led off */ | |
1683 | } | |
1684 | if (test_bit(HFC_CHIP_B410P, &hc->chip)) { | |
1685 | leds = 0; | |
1686 | for (i = 0; i < 4; i++) { | |
1687 | if (led[i] == 1) { | |
1688 | /*green*/ | |
1689 | leds |= (0x2 << (i * 2)); | |
1690 | } else if (led[i] == 2) { | |
1691 | /*red*/ | |
1692 | leds |= (0x1 << (i * 2)); | |
1693 | } | |
1694 | } | |
1695 | if (leds != (int)hc->ledstate) { | |
1696 | vpm_out(hc, 0, 0x1a8 + 3, leds); | |
1697 | hc->ledstate = leds; | |
1698 | } | |
1699 | } else { | |
1700 | leds = ((led[3] > 0) << 0) | ((led[1] > 0) << 1) | | |
1701 | ((led[0] > 0) << 2) | ((led[2] > 0) << 3) | | |
1702 | ((led[3] & 1) << 4) | ((led[1] & 1) << 5) | | |
1703 | ((led[0] & 1) << 6) | ((led[2] & 1) << 7); | |
1704 | if (leds != (int)hc->ledstate) { | |
1705 | HFC_outb_nodebug(hc, R_GPIO_EN1, leds & 0x0F); | |
1706 | HFC_outb_nodebug(hc, R_GPIO_OUT1, leds >> 4); | |
1707 | hc->ledstate = leds; | |
1708 | } | |
1709 | } | |
1710 | break; | |
1711 | ||
1712 | case 3: /* HFC 1S/2S Beronet */ | |
1713 | /* red blinking = PH_DEACTIVATE NT Mode | |
1714 | * red steady = PH_DEACTIVATE TE Mode | |
1715 | * green steady = PH_ACTIVATE | |
1716 | */ | |
1717 | for (i = 0; i < 2; i++) { | |
1718 | state = 0; | |
1719 | active = -1; | |
1720 | dch = hc->chan[(i << 2) | 2].dch; | |
1721 | if (dch) { | |
1722 | state = dch->state; | |
1723 | if (dch->dev.D.protocol == ISDN_P_NT_S0) | |
1724 | active = 3; | |
1725 | else | |
1726 | active = 7; | |
1727 | } | |
1728 | if (state) { | |
1729 | if (state == active) { | |
1730 | led[i] = 1; /* led green */ | |
1731 | } else | |
1732 | if (dch->dev.D.protocol == ISDN_P_TE_S0) | |
1733 | /* TE mode: led red */ | |
1734 | led[i] = 2; | |
1735 | else | |
1736 | if (hc->ledcount >> 11) | |
1737 | /* led red */ | |
1738 | led[i] = 2; | |
1739 | else | |
1740 | /* led off */ | |
1741 | led[i] = 0; | |
1742 | } else | |
1743 | led[i] = 0; /* led off */ | |
1744 | } | |
1745 | ||
1746 | ||
1747 | leds = (led[0] > 0) | ((led[1] > 0)<<1) | ((led[0]&1)<<2) | |
1748 | | ((led[1]&1)<<3); | |
1749 | if (leds != (int)hc->ledstate) { | |
1750 | HFC_outb_nodebug(hc, R_GPIO_EN1, | |
1751 | ((led[0] > 0) << 2) | ((led[1] > 0) << 3)); | |
1752 | HFC_outb_nodebug(hc, R_GPIO_OUT1, | |
1753 | ((led[0] & 1) << 2) | ((led[1] & 1) << 3)); | |
1754 | hc->ledstate = leds; | |
1755 | } | |
1756 | break; | |
1757 | case 8: /* HFC 8S+ Beronet */ | |
1758 | lled = 0; | |
1759 | ||
1760 | for (i = 0; i < 8; i++) { | |
1761 | state = 0; | |
1762 | active = -1; | |
1763 | dch = hc->chan[(i << 2) | 2].dch; | |
1764 | if (dch) { | |
1765 | state = dch->state; | |
1766 | if (dch->dev.D.protocol == ISDN_P_NT_S0) | |
1767 | active = 3; | |
1768 | else | |
1769 | active = 7; | |
1770 | } | |
1771 | if (state) { | |
1772 | if (state == active) { | |
1773 | lled |= 0 << i; | |
1774 | } else | |
1775 | if (hc->ledcount >> 11) | |
1776 | lled |= 0 << i; | |
1777 | else | |
1778 | lled |= 1 << i; | |
1779 | } else | |
1780 | lled |= 1 << i; | |
1781 | } | |
1782 | leddw = lled << 24 | lled << 16 | lled << 8 | lled; | |
1783 | if (leddw != hc->ledstate) { | |
1784 | /* HFC_outb(hc, R_BRG_PCM_CFG, 1); | |
1785 | HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x3); */ | |
1786 | /* was _io before */ | |
1787 | HFC_outb_nodebug(hc, R_BRG_PCM_CFG, 1 | V_PCM_CLK); | |
1788 | outw(0x4000, hc->pci_iobase + 4); | |
1789 | outl(leddw, hc->pci_iobase); | |
1790 | HFC_outb_nodebug(hc, R_BRG_PCM_CFG, V_PCM_CLK); | |
1791 | hc->ledstate = leddw; | |
1792 | } | |
1793 | break; | |
1794 | } | |
1795 | } | |
1796 | /* | |
1797 | * read dtmf coefficients | |
1798 | */ | |
1799 | ||
1800 | static void | |
1801 | hfcmulti_dtmf(struct hfc_multi *hc) | |
1802 | { | |
1803 | s32 *coeff; | |
1804 | u_int mantissa; | |
1805 | int co, ch; | |
1806 | struct bchannel *bch = NULL; | |
1807 | u8 exponent; | |
1808 | int dtmf = 0; | |
1809 | int addr; | |
1810 | u16 w_float; | |
1811 | struct sk_buff *skb; | |
1812 | struct mISDNhead *hh; | |
1813 | ||
1814 | if (debug & DEBUG_HFCMULTI_DTMF) | |
1815 | printk(KERN_DEBUG "%s: dtmf detection irq\n", __func__); | |
1816 | for (ch = 0; ch <= 31; ch++) { | |
1817 | /* only process enabled B-channels */ | |
1818 | bch = hc->chan[ch].bch; | |
1819 | if (!bch) | |
1820 | continue; | |
1821 | if (!hc->created[hc->chan[ch].port]) | |
1822 | continue; | |
1823 | if (!test_bit(FLG_TRANSPARENT, &bch->Flags)) | |
1824 | continue; | |
1825 | if (debug & DEBUG_HFCMULTI_DTMF) | |
1826 | printk(KERN_DEBUG "%s: dtmf channel %d:", | |
1827 | __func__, ch); | |
1828 | coeff = &(hc->chan[ch].coeff[hc->chan[ch].coeff_count * 16]); | |
1829 | dtmf = 1; | |
1830 | for (co = 0; co < 8; co++) { | |
1831 | /* read W(n-1) coefficient */ | |
1832 | addr = hc->DTMFbase + ((co<<7) | (ch<<2)); | |
1833 | HFC_outb_nodebug(hc, R_RAM_ADDR0, addr); | |
1834 | HFC_outb_nodebug(hc, R_RAM_ADDR1, addr>>8); | |
1835 | HFC_outb_nodebug(hc, R_RAM_ADDR2, (addr>>16) | |
1836 | | V_ADDR_INC); | |
1837 | w_float = HFC_inb_nodebug(hc, R_RAM_DATA); | |
1838 | w_float |= (HFC_inb_nodebug(hc, R_RAM_DATA) << 8); | |
1839 | if (debug & DEBUG_HFCMULTI_DTMF) | |
1840 | printk(" %04x", w_float); | |
1841 | ||
1842 | /* decode float (see chip doc) */ | |
1843 | mantissa = w_float & 0x0fff; | |
1844 | if (w_float & 0x8000) | |
1845 | mantissa |= 0xfffff000; | |
1846 | exponent = (w_float>>12) & 0x7; | |
1847 | if (exponent) { | |
1848 | mantissa ^= 0x1000; | |
1849 | mantissa <<= (exponent-1); | |
1850 | } | |
1851 | ||
1852 | /* store coefficient */ | |
1853 | coeff[co<<1] = mantissa; | |
1854 | ||
1855 | /* read W(n) coefficient */ | |
1856 | w_float = HFC_inb_nodebug(hc, R_RAM_DATA); | |
1857 | w_float |= (HFC_inb_nodebug(hc, R_RAM_DATA) << 8); | |
1858 | if (debug & DEBUG_HFCMULTI_DTMF) | |
1859 | printk(" %04x", w_float); | |
1860 | ||
1861 | /* decode float (see chip doc) */ | |
1862 | mantissa = w_float & 0x0fff; | |
1863 | if (w_float & 0x8000) | |
1864 | mantissa |= 0xfffff000; | |
1865 | exponent = (w_float>>12) & 0x7; | |
1866 | if (exponent) { | |
1867 | mantissa ^= 0x1000; | |
1868 | mantissa <<= (exponent-1); | |
1869 | } | |
1870 | ||
1871 | /* store coefficient */ | |
1872 | coeff[(co<<1)|1] = mantissa; | |
1873 | } | |
1874 | if (debug & DEBUG_HFCMULTI_DTMF) | |
b5df5a5c AE |
1875 | printk(" DTMF ready %08x %08x %08x %08x " |
1876 | "%08x %08x %08x %08x\n", | |
af69fb3a KK |
1877 | coeff[0], coeff[1], coeff[2], coeff[3], |
1878 | coeff[4], coeff[5], coeff[6], coeff[7]); | |
1879 | hc->chan[ch].coeff_count++; | |
1880 | if (hc->chan[ch].coeff_count == 8) { | |
1881 | hc->chan[ch].coeff_count = 0; | |
1882 | skb = mI_alloc_skb(512, GFP_ATOMIC); | |
1883 | if (!skb) { | |
eac74af9 | 1884 | printk(KERN_DEBUG "%s: No memory for skb\n", |
af69fb3a KK |
1885 | __func__); |
1886 | continue; | |
1887 | } | |
1888 | hh = mISDN_HEAD_P(skb); | |
1889 | hh->prim = PH_CONTROL_IND; | |
1890 | hh->id = DTMF_HFC_COEF; | |
1891 | memcpy(skb_put(skb, 512), hc->chan[ch].coeff, 512); | |
1892 | recv_Bchannel_skb(bch, skb); | |
1893 | } | |
1894 | } | |
1895 | ||
1896 | /* restart DTMF processing */ | |
1897 | hc->dtmf = dtmf; | |
1898 | if (dtmf) | |
1899 | HFC_outb_nodebug(hc, R_DTMF, hc->hw.r_dtmf | V_RST_DTMF); | |
1900 | } | |
1901 | ||
1902 | ||
1903 | /* | |
1904 | * fill fifo as much as possible | |
1905 | */ | |
1906 | ||
1907 | static void | |
1908 | hfcmulti_tx(struct hfc_multi *hc, int ch) | |
1909 | { | |
1910 | int i, ii, temp, len = 0; | |
1911 | int Zspace, z1, z2; /* must be int for calculation */ | |
1912 | int Fspace, f1, f2; | |
1913 | u_char *d; | |
1914 | int *txpending, slot_tx; | |
1915 | struct bchannel *bch; | |
1916 | struct dchannel *dch; | |
1917 | struct sk_buff **sp = NULL; | |
1918 | int *idxp; | |
1919 | ||
1920 | bch = hc->chan[ch].bch; | |
1921 | dch = hc->chan[ch].dch; | |
1922 | if ((!dch) && (!bch)) | |
1923 | return; | |
1924 | ||
1925 | txpending = &hc->chan[ch].txpending; | |
1926 | slot_tx = hc->chan[ch].slot_tx; | |
1927 | if (dch) { | |
1928 | if (!test_bit(FLG_ACTIVE, &dch->Flags)) | |
1929 | return; | |
1930 | sp = &dch->tx_skb; | |
1931 | idxp = &dch->tx_idx; | |
1932 | } else { | |
1933 | if (!test_bit(FLG_ACTIVE, &bch->Flags)) | |
1934 | return; | |
1935 | sp = &bch->tx_skb; | |
1936 | idxp = &bch->tx_idx; | |
1937 | } | |
1938 | if (*sp) | |
1939 | len = (*sp)->len; | |
1940 | ||
1941 | if ((!len) && *txpending != 1) | |
1942 | return; /* no data */ | |
1943 | ||
1944 | if (test_bit(HFC_CHIP_B410P, &hc->chip) && | |
1945 | (hc->chan[ch].protocol == ISDN_P_B_RAW) && | |
1946 | (hc->chan[ch].slot_rx < 0) && | |
1947 | (hc->chan[ch].slot_tx < 0)) | |
1948 | HFC_outb_nodebug(hc, R_FIFO, 0x20 | (ch << 1)); | |
1949 | else | |
1950 | HFC_outb_nodebug(hc, R_FIFO, ch << 1); | |
1951 | HFC_wait_nodebug(hc); | |
1952 | ||
1953 | if (*txpending == 2) { | |
1954 | /* reset fifo */ | |
1955 | HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F); | |
1956 | HFC_wait_nodebug(hc); | |
1957 | HFC_outb(hc, A_SUBCH_CFG, 0); | |
1958 | *txpending = 1; | |
1959 | } | |
1960 | next_frame: | |
1961 | if (dch || test_bit(FLG_HDLC, &bch->Flags)) { | |
1962 | f1 = HFC_inb_nodebug(hc, A_F1); | |
1963 | f2 = HFC_inb_nodebug(hc, A_F2); | |
1964 | while (f2 != (temp = HFC_inb_nodebug(hc, A_F2))) { | |
1965 | if (debug & DEBUG_HFCMULTI_FIFO) | |
1966 | printk(KERN_DEBUG | |
1967 | "%s(card %d): reread f2 because %d!=%d\n", | |
1968 | __func__, hc->id + 1, temp, f2); | |
1969 | f2 = temp; /* repeat until F2 is equal */ | |
1970 | } | |
1971 | Fspace = f2 - f1 - 1; | |
1972 | if (Fspace < 0) | |
1973 | Fspace += hc->Flen; | |
1974 | /* | |
1975 | * Old FIFO handling doesn't give us the current Z2 read | |
1976 | * pointer, so we cannot send the next frame before the fifo | |
1977 | * is empty. It makes no difference except for a slightly | |
1978 | * lower performance. | |
1979 | */ | |
1980 | if (test_bit(HFC_CHIP_REVISION0, &hc->chip)) { | |
1981 | if (f1 != f2) | |
1982 | Fspace = 0; | |
1983 | else | |
1984 | Fspace = 1; | |
1985 | } | |
1986 | /* one frame only for ST D-channels, to allow resending */ | |
db9bb63a | 1987 | if (hc->ctype != HFC_TYPE_E1 && dch) { |
af69fb3a KK |
1988 | if (f1 != f2) |
1989 | Fspace = 0; | |
1990 | } | |
1991 | /* F-counter full condition */ | |
1992 | if (Fspace == 0) | |
1993 | return; | |
1994 | } | |
1995 | z1 = HFC_inw_nodebug(hc, A_Z1) - hc->Zmin; | |
1996 | z2 = HFC_inw_nodebug(hc, A_Z2) - hc->Zmin; | |
1997 | while (z2 != (temp = (HFC_inw_nodebug(hc, A_Z2) - hc->Zmin))) { | |
1998 | if (debug & DEBUG_HFCMULTI_FIFO) | |
1999 | printk(KERN_DEBUG "%s(card %d): reread z2 because " | |
2000 | "%d!=%d\n", __func__, hc->id + 1, temp, z2); | |
2001 | z2 = temp; /* repeat unti Z2 is equal */ | |
2002 | } | |
7cfa153d AE |
2003 | hc->chan[ch].Zfill = z1 - z2; |
2004 | if (hc->chan[ch].Zfill < 0) | |
2005 | hc->chan[ch].Zfill += hc->Zlen; | |
af69fb3a KK |
2006 | Zspace = z2 - z1; |
2007 | if (Zspace <= 0) | |
2008 | Zspace += hc->Zlen; | |
2009 | Zspace -= 4; /* keep not too full, so pointers will not overrun */ | |
2010 | /* fill transparent data only to maxinum transparent load (minus 4) */ | |
2011 | if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags)) | |
2012 | Zspace = Zspace - hc->Zlen + hc->max_trans; | |
2013 | if (Zspace <= 0) /* no space of 4 bytes */ | |
2014 | return; | |
2015 | ||
2016 | /* if no data */ | |
2017 | if (!len) { | |
2018 | if (z1 == z2) { /* empty */ | |
2019 | /* if done with FIFO audio data during PCM connection */ | |
2020 | if (bch && (!test_bit(FLG_HDLC, &bch->Flags)) && | |
2021 | *txpending && slot_tx >= 0) { | |
2022 | if (debug & DEBUG_HFCMULTI_MODE) | |
2023 | printk(KERN_DEBUG | |
2024 | "%s: reconnecting PCM due to no " | |
2025 | "more FIFO data: channel %d " | |
2026 | "slot_tx %d\n", | |
2027 | __func__, ch, slot_tx); | |
2028 | /* connect slot */ | |
db9bb63a KK |
2029 | if (hc->ctype == HFC_TYPE_XHFC) |
2030 | HFC_outb(hc, A_CON_HDLC, 0xc0 | |
2031 | | 0x07 << 2 | V_HDLC_TRP | V_IFF); | |
2032 | /* Enable FIFO, no interrupt */ | |
2033 | else | |
2034 | HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 | | |
2035 | V_HDLC_TRP | V_IFF); | |
af69fb3a KK |
2036 | HFC_outb_nodebug(hc, R_FIFO, ch<<1 | 1); |
2037 | HFC_wait_nodebug(hc); | |
db9bb63a KK |
2038 | if (hc->ctype == HFC_TYPE_XHFC) |
2039 | HFC_outb(hc, A_CON_HDLC, 0xc0 | |
2040 | | 0x07 << 2 | V_HDLC_TRP | V_IFF); | |
2041 | /* Enable FIFO, no interrupt */ | |
2042 | else | |
2043 | HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 | | |
2044 | V_HDLC_TRP | V_IFF); | |
af69fb3a KK |
2045 | HFC_outb_nodebug(hc, R_FIFO, ch<<1); |
2046 | HFC_wait_nodebug(hc); | |
2047 | } | |
2048 | *txpending = 0; | |
2049 | } | |
2050 | return; /* no data */ | |
2051 | } | |
2052 | ||
8dd2f36f AE |
2053 | /* "fill fifo if empty" feature */ |
2054 | if (bch && test_bit(FLG_FILLEMPTY, &bch->Flags) | |
2055 | && !test_bit(FLG_HDLC, &bch->Flags) && z2 == z1) { | |
2056 | if (debug & DEBUG_HFCMULTI_FILL) | |
2057 | printk(KERN_DEBUG "%s: buffer empty, so we have " | |
2058 | "underrun\n", __func__); | |
2059 | /* fill buffer, to prevent future underrun */ | |
2060 | hc->write_fifo(hc, hc->silence_data, poll >> 1); | |
2061 | Zspace -= (poll >> 1); | |
2062 | } | |
2063 | ||
af69fb3a KK |
2064 | /* if audio data and connected slot */ |
2065 | if (bch && (!test_bit(FLG_HDLC, &bch->Flags)) && (!*txpending) | |
2066 | && slot_tx >= 0) { | |
2067 | if (debug & DEBUG_HFCMULTI_MODE) | |
2068 | printk(KERN_DEBUG "%s: disconnecting PCM due to " | |
2069 | "FIFO data: channel %d slot_tx %d\n", | |
2070 | __func__, ch, slot_tx); | |
2071 | /* disconnect slot */ | |
db9bb63a KK |
2072 | if (hc->ctype == HFC_TYPE_XHFC) |
2073 | HFC_outb(hc, A_CON_HDLC, 0x80 | |
2074 | | 0x07 << 2 | V_HDLC_TRP | V_IFF); | |
2075 | /* Enable FIFO, no interrupt */ | |
2076 | else | |
2077 | HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 | | |
2078 | V_HDLC_TRP | V_IFF); | |
af69fb3a KK |
2079 | HFC_outb_nodebug(hc, R_FIFO, ch<<1 | 1); |
2080 | HFC_wait_nodebug(hc); | |
db9bb63a KK |
2081 | if (hc->ctype == HFC_TYPE_XHFC) |
2082 | HFC_outb(hc, A_CON_HDLC, 0x80 | |
2083 | | 0x07 << 2 | V_HDLC_TRP | V_IFF); | |
2084 | /* Enable FIFO, no interrupt */ | |
2085 | else | |
2086 | HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 | | |
2087 | V_HDLC_TRP | V_IFF); | |
af69fb3a KK |
2088 | HFC_outb_nodebug(hc, R_FIFO, ch<<1); |
2089 | HFC_wait_nodebug(hc); | |
2090 | } | |
2091 | *txpending = 1; | |
2092 | ||
2093 | /* show activity */ | |
2094 | hc->activity[hc->chan[ch].port] = 1; | |
2095 | ||
2096 | /* fill fifo to what we have left */ | |
2097 | ii = len; | |
2098 | if (dch || test_bit(FLG_HDLC, &bch->Flags)) | |
2099 | temp = 1; | |
2100 | else | |
2101 | temp = 0; | |
2102 | i = *idxp; | |
2103 | d = (*sp)->data + i; | |
2104 | if (ii - i > Zspace) | |
2105 | ii = Zspace + i; | |
2106 | if (debug & DEBUG_HFCMULTI_FIFO) | |
2107 | printk(KERN_DEBUG "%s(card %d): fifo(%d) has %d bytes space " | |
2108 | "left (z1=%04x, z2=%04x) sending %d of %d bytes %s\n", | |
2109 | __func__, hc->id + 1, ch, Zspace, z1, z2, ii-i, len-i, | |
eac74af9 | 2110 | temp ? "HDLC" : "TRANS"); |
af69fb3a | 2111 | |
af69fb3a KK |
2112 | /* Have to prep the audio data */ |
2113 | hc->write_fifo(hc, d, ii - i); | |
7cfa153d | 2114 | hc->chan[ch].Zfill += ii - i; |
af69fb3a KK |
2115 | *idxp = ii; |
2116 | ||
2117 | /* if not all data has been written */ | |
2118 | if (ii != len) { | |
2119 | /* NOTE: fifo is started by the calling function */ | |
2120 | return; | |
2121 | } | |
2122 | ||
2123 | /* if all data has been written, terminate frame */ | |
2124 | if (dch || test_bit(FLG_HDLC, &bch->Flags)) { | |
2125 | /* increment f-counter */ | |
2126 | HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_INC_F); | |
2127 | HFC_wait_nodebug(hc); | |
2128 | } | |
2129 | ||
2130 | /* send confirm, since get_net_bframe will not do it with trans */ | |
2131 | if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags)) | |
2132 | confirm_Bsend(bch); | |
2133 | ||
2134 | /* check for next frame */ | |
2135 | dev_kfree_skb(*sp); | |
2136 | if (bch && get_next_bframe(bch)) { /* hdlc is confirmed here */ | |
2137 | len = (*sp)->len; | |
2138 | goto next_frame; | |
2139 | } | |
2140 | if (dch && get_next_dframe(dch)) { | |
2141 | len = (*sp)->len; | |
2142 | goto next_frame; | |
2143 | } | |
2144 | ||
2145 | /* | |
2146 | * now we have no more data, so in case of transparent, | |
2147 | * we set the last byte in fifo to 'silence' in case we will get | |
2148 | * no more data at all. this prevents sending an undefined value. | |
2149 | */ | |
2150 | if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags)) | |
8dd2f36f | 2151 | HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, hc->silence); |
af69fb3a KK |
2152 | } |
2153 | ||
2154 | ||
2155 | /* NOTE: only called if E1 card is in active state */ | |
2156 | static void | |
2157 | hfcmulti_rx(struct hfc_multi *hc, int ch) | |
2158 | { | |
2159 | int temp; | |
2160 | int Zsize, z1, z2 = 0; /* = 0, to make GCC happy */ | |
2161 | int f1 = 0, f2 = 0; /* = 0, to make GCC happy */ | |
2162 | int again = 0; | |
2163 | struct bchannel *bch; | |
2164 | struct dchannel *dch; | |
2165 | struct sk_buff *skb, **sp = NULL; | |
2166 | int maxlen; | |
2167 | ||
2168 | bch = hc->chan[ch].bch; | |
2169 | dch = hc->chan[ch].dch; | |
2170 | if ((!dch) && (!bch)) | |
2171 | return; | |
2172 | if (dch) { | |
2173 | if (!test_bit(FLG_ACTIVE, &dch->Flags)) | |
2174 | return; | |
2175 | sp = &dch->rx_skb; | |
2176 | maxlen = dch->maxlen; | |
2177 | } else { | |
2178 | if (!test_bit(FLG_ACTIVE, &bch->Flags)) | |
2179 | return; | |
2180 | sp = &bch->rx_skb; | |
2181 | maxlen = bch->maxlen; | |
2182 | } | |
2183 | next_frame: | |
2184 | /* on first AND before getting next valid frame, R_FIFO must be written | |
2185 | to. */ | |
2186 | if (test_bit(HFC_CHIP_B410P, &hc->chip) && | |
2187 | (hc->chan[ch].protocol == ISDN_P_B_RAW) && | |
2188 | (hc->chan[ch].slot_rx < 0) && | |
2189 | (hc->chan[ch].slot_tx < 0)) | |
2190 | HFC_outb_nodebug(hc, R_FIFO, 0x20 | (ch<<1) | 1); | |
2191 | else | |
2192 | HFC_outb_nodebug(hc, R_FIFO, (ch<<1)|1); | |
2193 | HFC_wait_nodebug(hc); | |
2194 | ||
2195 | /* ignore if rx is off BUT change fifo (above) to start pending TX */ | |
2196 | if (hc->chan[ch].rx_off) | |
2197 | return; | |
2198 | ||
2199 | if (dch || test_bit(FLG_HDLC, &bch->Flags)) { | |
2200 | f1 = HFC_inb_nodebug(hc, A_F1); | |
2201 | while (f1 != (temp = HFC_inb_nodebug(hc, A_F1))) { | |
2202 | if (debug & DEBUG_HFCMULTI_FIFO) | |
2203 | printk(KERN_DEBUG | |
2204 | "%s(card %d): reread f1 because %d!=%d\n", | |
2205 | __func__, hc->id + 1, temp, f1); | |
2206 | f1 = temp; /* repeat until F1 is equal */ | |
2207 | } | |
2208 | f2 = HFC_inb_nodebug(hc, A_F2); | |
2209 | } | |
2210 | z1 = HFC_inw_nodebug(hc, A_Z1) - hc->Zmin; | |
2211 | while (z1 != (temp = (HFC_inw_nodebug(hc, A_Z1) - hc->Zmin))) { | |
2212 | if (debug & DEBUG_HFCMULTI_FIFO) | |
2213 | printk(KERN_DEBUG "%s(card %d): reread z2 because " | |
2214 | "%d!=%d\n", __func__, hc->id + 1, temp, z2); | |
2215 | z1 = temp; /* repeat until Z1 is equal */ | |
2216 | } | |
2217 | z2 = HFC_inw_nodebug(hc, A_Z2) - hc->Zmin; | |
2218 | Zsize = z1 - z2; | |
2219 | if ((dch || test_bit(FLG_HDLC, &bch->Flags)) && f1 != f2) | |
2220 | /* complete hdlc frame */ | |
2221 | Zsize++; | |
2222 | if (Zsize < 0) | |
2223 | Zsize += hc->Zlen; | |
2224 | /* if buffer is empty */ | |
2225 | if (Zsize <= 0) | |
2226 | return; | |
2227 | ||
2228 | if (*sp == NULL) { | |
2229 | *sp = mI_alloc_skb(maxlen + 3, GFP_ATOMIC); | |
2230 | if (*sp == NULL) { | |
2231 | printk(KERN_DEBUG "%s: No mem for rx_skb\n", | |
2232 | __func__); | |
2233 | return; | |
2234 | } | |
2235 | } | |
2236 | /* show activity */ | |
2237 | hc->activity[hc->chan[ch].port] = 1; | |
2238 | ||
2239 | /* empty fifo with what we have */ | |
2240 | if (dch || test_bit(FLG_HDLC, &bch->Flags)) { | |
2241 | if (debug & DEBUG_HFCMULTI_FIFO) | |
2242 | printk(KERN_DEBUG "%s(card %d): fifo(%d) reading %d " | |
2243 | "bytes (z1=%04x, z2=%04x) HDLC %s (f1=%d, f2=%d) " | |
2244 | "got=%d (again %d)\n", __func__, hc->id + 1, ch, | |
2245 | Zsize, z1, z2, (f1 == f2) ? "fragment" : "COMPLETE", | |
2246 | f1, f2, Zsize + (*sp)->len, again); | |
2247 | /* HDLC */ | |
2248 | if ((Zsize + (*sp)->len) > (maxlen + 3)) { | |
2249 | if (debug & DEBUG_HFCMULTI_FIFO) | |
2250 | printk(KERN_DEBUG | |
2251 | "%s(card %d): hdlc-frame too large.\n", | |
2252 | __func__, hc->id + 1); | |
2253 | skb_trim(*sp, 0); | |
2254 | HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F); | |
2255 | HFC_wait_nodebug(hc); | |
2256 | return; | |
2257 | } | |
2258 | ||
2259 | hc->read_fifo(hc, skb_put(*sp, Zsize), Zsize); | |
2260 | ||
2261 | if (f1 != f2) { | |
2262 | /* increment Z2,F2-counter */ | |
2263 | HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_INC_F); | |
2264 | HFC_wait_nodebug(hc); | |
2265 | /* check size */ | |
2266 | if ((*sp)->len < 4) { | |
2267 | if (debug & DEBUG_HFCMULTI_FIFO) | |
2268 | printk(KERN_DEBUG | |
2269 | "%s(card %d): Frame below minimum " | |
2270 | "size\n", __func__, hc->id + 1); | |
2271 | skb_trim(*sp, 0); | |
2272 | goto next_frame; | |
2273 | } | |
2274 | /* there is at least one complete frame, check crc */ | |
2275 | if ((*sp)->data[(*sp)->len - 1]) { | |
2276 | if (debug & DEBUG_HFCMULTI_CRC) | |
2277 | printk(KERN_DEBUG | |
2278 | "%s: CRC-error\n", __func__); | |
2279 | skb_trim(*sp, 0); | |
2280 | goto next_frame; | |
2281 | } | |
2282 | skb_trim(*sp, (*sp)->len - 3); | |
2283 | if ((*sp)->len < MISDN_COPY_SIZE) { | |
2284 | skb = *sp; | |
2285 | *sp = mI_alloc_skb(skb->len, GFP_ATOMIC); | |
2286 | if (*sp) { | |
2287 | memcpy(skb_put(*sp, skb->len), | |
2288 | skb->data, skb->len); | |
2289 | skb_trim(skb, 0); | |
2290 | } else { | |
2291 | printk(KERN_DEBUG "%s: No mem\n", | |
2292 | __func__); | |
2293 | *sp = skb; | |
2294 | skb = NULL; | |
2295 | } | |
2296 | } else { | |
2297 | skb = NULL; | |
2298 | } | |
2299 | if (debug & DEBUG_HFCMULTI_FIFO) { | |
2300 | printk(KERN_DEBUG "%s(card %d):", | |
2301 | __func__, hc->id + 1); | |
2302 | temp = 0; | |
2303 | while (temp < (*sp)->len) | |
2304 | printk(" %02x", (*sp)->data[temp++]); | |
2305 | printk("\n"); | |
2306 | } | |
2307 | if (dch) | |
2308 | recv_Dchannel(dch); | |
2309 | else | |
7cfa153d | 2310 | recv_Bchannel(bch, MISDN_ID_ANY); |
af69fb3a KK |
2311 | *sp = skb; |
2312 | again++; | |
2313 | goto next_frame; | |
2314 | } | |
2315 | /* there is an incomplete frame */ | |
2316 | } else { | |
2317 | /* transparent */ | |
2318 | if (Zsize > skb_tailroom(*sp)) | |
2319 | Zsize = skb_tailroom(*sp); | |
2320 | hc->read_fifo(hc, skb_put(*sp, Zsize), Zsize); | |
2321 | if (((*sp)->len) < MISDN_COPY_SIZE) { | |
2322 | skb = *sp; | |
2323 | *sp = mI_alloc_skb(skb->len, GFP_ATOMIC); | |
2324 | if (*sp) { | |
2325 | memcpy(skb_put(*sp, skb->len), | |
2326 | skb->data, skb->len); | |
2327 | skb_trim(skb, 0); | |
2328 | } else { | |
2329 | printk(KERN_DEBUG "%s: No mem\n", __func__); | |
2330 | *sp = skb; | |
2331 | skb = NULL; | |
2332 | } | |
2333 | } else { | |
2334 | skb = NULL; | |
2335 | } | |
2336 | if (debug & DEBUG_HFCMULTI_FIFO) | |
2337 | printk(KERN_DEBUG | |
2338 | "%s(card %d): fifo(%d) reading %d bytes " | |
2339 | "(z1=%04x, z2=%04x) TRANS\n", | |
2340 | __func__, hc->id + 1, ch, Zsize, z1, z2); | |
2341 | /* only bch is transparent */ | |
7cfa153d | 2342 | recv_Bchannel(bch, hc->chan[ch].Zfill); |
af69fb3a KK |
2343 | *sp = skb; |
2344 | } | |
2345 | } | |
2346 | ||
2347 | ||
2348 | /* | |
2349 | * Interrupt handler | |
2350 | */ | |
2351 | static void | |
2352 | signal_state_up(struct dchannel *dch, int info, char *msg) | |
2353 | { | |
2354 | struct sk_buff *skb; | |
2355 | int id, data = info; | |
2356 | ||
2357 | if (debug & DEBUG_HFCMULTI_STATE) | |
2358 | printk(KERN_DEBUG "%s: %s\n", __func__, msg); | |
2359 | ||
2360 | id = TEI_SAPI | (GROUP_TEI << 8); /* manager address */ | |
2361 | ||
2362 | skb = _alloc_mISDN_skb(MPH_INFORMATION_IND, id, sizeof(data), &data, | |
2363 | GFP_ATOMIC); | |
2364 | if (!skb) | |
2365 | return; | |
2366 | recv_Dchannel_skb(dch, skb); | |
2367 | } | |
2368 | ||
2369 | static inline void | |
2370 | handle_timer_irq(struct hfc_multi *hc) | |
2371 | { | |
2372 | int ch, temp; | |
2373 | struct dchannel *dch; | |
2374 | u_long flags; | |
2375 | ||
2376 | /* process queued resync jobs */ | |
2377 | if (hc->e1_resync) { | |
2378 | /* lock, so e1_resync gets not changed */ | |
2379 | spin_lock_irqsave(&HFClock, flags); | |
2380 | if (hc->e1_resync & 1) { | |
2381 | if (debug & DEBUG_HFCMULTI_PLXSD) | |
2382 | printk(KERN_DEBUG "Enable SYNC_I\n"); | |
2383 | HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC); | |
2384 | /* disable JATT, if RX_SYNC is set */ | |
2385 | if (test_bit(HFC_CHIP_RX_SYNC, &hc->chip)) | |
2386 | HFC_outb(hc, R_SYNC_OUT, V_SYNC_E1_RX); | |
2387 | } | |
2388 | if (hc->e1_resync & 2) { | |
2389 | if (debug & DEBUG_HFCMULTI_PLXSD) | |
2390 | printk(KERN_DEBUG "Enable jatt PLL\n"); | |
2391 | HFC_outb(hc, R_SYNC_CTRL, V_SYNC_OFFS); | |
2392 | } | |
2393 | if (hc->e1_resync & 4) { | |
2394 | if (debug & DEBUG_HFCMULTI_PLXSD) | |
2395 | printk(KERN_DEBUG | |
2396 | "Enable QUARTZ for HFC-E1\n"); | |
2397 | /* set jatt to quartz */ | |
2398 | HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC | |
2399 | | V_JATT_OFF); | |
2400 | /* switch to JATT, in case it is not already */ | |
2401 | HFC_outb(hc, R_SYNC_OUT, 0); | |
2402 | } | |
2403 | hc->e1_resync = 0; | |
2404 | spin_unlock_irqrestore(&HFClock, flags); | |
2405 | } | |
2406 | ||
db9bb63a | 2407 | if (hc->ctype != HFC_TYPE_E1 || hc->e1_state == 1) |
af69fb3a KK |
2408 | for (ch = 0; ch <= 31; ch++) { |
2409 | if (hc->created[hc->chan[ch].port]) { | |
2410 | hfcmulti_tx(hc, ch); | |
2411 | /* fifo is started when switching to rx-fifo */ | |
2412 | hfcmulti_rx(hc, ch); | |
2413 | if (hc->chan[ch].dch && | |
2414 | hc->chan[ch].nt_timer > -1) { | |
2415 | dch = hc->chan[ch].dch; | |
2416 | if (!(--hc->chan[ch].nt_timer)) { | |
2417 | schedule_event(dch, | |
2418 | FLG_PHCHANGE); | |
2419 | if (debug & | |
2420 | DEBUG_HFCMULTI_STATE) | |
2421 | printk(KERN_DEBUG | |
2422 | "%s: nt_timer at " | |
2423 | "state %x\n", | |
2424 | __func__, | |
2425 | dch->state); | |
2426 | } | |
2427 | } | |
2428 | } | |
2429 | } | |
db9bb63a | 2430 | if (hc->ctype == HFC_TYPE_E1 && hc->created[0]) { |
af69fb3a KK |
2431 | dch = hc->chan[hc->dslot].dch; |
2432 | if (test_bit(HFC_CFG_REPORT_LOS, &hc->chan[hc->dslot].cfg)) { | |
2433 | /* LOS */ | |
2434 | temp = HFC_inb_nodebug(hc, R_SYNC_STA) & V_SIG_LOS; | |
2435 | if (!temp && hc->chan[hc->dslot].los) | |
2436 | signal_state_up(dch, L1_SIGNAL_LOS_ON, | |
2437 | "LOS detected"); | |
2438 | if (temp && !hc->chan[hc->dslot].los) | |
2439 | signal_state_up(dch, L1_SIGNAL_LOS_OFF, | |
2440 | "LOS gone"); | |
2441 | hc->chan[hc->dslot].los = temp; | |
2442 | } | |
2443 | if (test_bit(HFC_CFG_REPORT_AIS, &hc->chan[hc->dslot].cfg)) { | |
2444 | /* AIS */ | |
2445 | temp = HFC_inb_nodebug(hc, R_SYNC_STA) & V_AIS; | |
2446 | if (!temp && hc->chan[hc->dslot].ais) | |
2447 | signal_state_up(dch, L1_SIGNAL_AIS_ON, | |
2448 | "AIS detected"); | |
2449 | if (temp && !hc->chan[hc->dslot].ais) | |
2450 | signal_state_up(dch, L1_SIGNAL_AIS_OFF, | |
2451 | "AIS gone"); | |
2452 | hc->chan[hc->dslot].ais = temp; | |
2453 | } | |
2454 | if (test_bit(HFC_CFG_REPORT_SLIP, &hc->chan[hc->dslot].cfg)) { | |
2455 | /* SLIP */ | |
2456 | temp = HFC_inb_nodebug(hc, R_SLIP) & V_FOSLIP_RX; | |
2457 | if (!temp && hc->chan[hc->dslot].slip_rx) | |
2458 | signal_state_up(dch, L1_SIGNAL_SLIP_RX, | |
2459 | " bit SLIP detected RX"); | |
2460 | hc->chan[hc->dslot].slip_rx = temp; | |
2461 | temp = HFC_inb_nodebug(hc, R_SLIP) & V_FOSLIP_TX; | |
2462 | if (!temp && hc->chan[hc->dslot].slip_tx) | |
2463 | signal_state_up(dch, L1_SIGNAL_SLIP_TX, | |
2464 | " bit SLIP detected TX"); | |
2465 | hc->chan[hc->dslot].slip_tx = temp; | |
2466 | } | |
2467 | if (test_bit(HFC_CFG_REPORT_RDI, &hc->chan[hc->dslot].cfg)) { | |
2468 | /* RDI */ | |
2469 | temp = HFC_inb_nodebug(hc, R_RX_SL0_0) & V_A; | |
2470 | if (!temp && hc->chan[hc->dslot].rdi) | |
2471 | signal_state_up(dch, L1_SIGNAL_RDI_ON, | |
2472 | "RDI detected"); | |
2473 | if (temp && !hc->chan[hc->dslot].rdi) | |
2474 | signal_state_up(dch, L1_SIGNAL_RDI_OFF, | |
2475 | "RDI gone"); | |
2476 | hc->chan[hc->dslot].rdi = temp; | |
2477 | } | |
2478 | temp = HFC_inb_nodebug(hc, R_JATT_DIR); | |
2479 | switch (hc->chan[hc->dslot].sync) { | |
2480 | case 0: | |
2481 | if ((temp & 0x60) == 0x60) { | |
2482 | if (debug & DEBUG_HFCMULTI_SYNC) | |
2483 | printk(KERN_DEBUG | |
2484 | "%s: (id=%d) E1 now " | |
2485 | "in clock sync\n", | |
2486 | __func__, hc->id); | |
2487 | HFC_outb(hc, R_RX_OFF, | |
2488 | hc->chan[hc->dslot].jitter | V_RX_INIT); | |
2489 | HFC_outb(hc, R_TX_OFF, | |
2490 | hc->chan[hc->dslot].jitter | V_RX_INIT); | |
2491 | hc->chan[hc->dslot].sync = 1; | |
2492 | goto check_framesync; | |
2493 | } | |
2494 | break; | |
2495 | case 1: | |
2496 | if ((temp & 0x60) != 0x60) { | |
2497 | if (debug & DEBUG_HFCMULTI_SYNC) | |
2498 | printk(KERN_DEBUG | |
2499 | "%s: (id=%d) E1 " | |
2500 | "lost clock sync\n", | |
2501 | __func__, hc->id); | |
2502 | hc->chan[hc->dslot].sync = 0; | |
2503 | break; | |
2504 | } | |
2505 | check_framesync: | |
2506 | temp = HFC_inb_nodebug(hc, R_SYNC_STA); | |
2507 | if (temp == 0x27) { | |
2508 | if (debug & DEBUG_HFCMULTI_SYNC) | |
2509 | printk(KERN_DEBUG | |
2510 | "%s: (id=%d) E1 " | |
2511 | "now in frame sync\n", | |
2512 | __func__, hc->id); | |
2513 | hc->chan[hc->dslot].sync = 2; | |
2514 | } | |
2515 | break; | |
2516 | case 2: | |
2517 | if ((temp & 0x60) != 0x60) { | |
2518 | if (debug & DEBUG_HFCMULTI_SYNC) | |
2519 | printk(KERN_DEBUG | |
2520 | "%s: (id=%d) E1 lost " | |
2521 | "clock & frame sync\n", | |
2522 | __func__, hc->id); | |
2523 | hc->chan[hc->dslot].sync = 0; | |
2524 | break; | |
2525 | } | |
2526 | temp = HFC_inb_nodebug(hc, R_SYNC_STA); | |
2527 | if (temp != 0x27) { | |
2528 | if (debug & DEBUG_HFCMULTI_SYNC) | |
2529 | printk(KERN_DEBUG | |
2530 | "%s: (id=%d) E1 " | |
2531 | "lost frame sync\n", | |
2532 | __func__, hc->id); | |
2533 | hc->chan[hc->dslot].sync = 1; | |
2534 | } | |
2535 | break; | |
2536 | } | |
2537 | } | |
2538 | ||
2539 | if (test_bit(HFC_CHIP_WATCHDOG, &hc->chip)) | |
2540 | hfcmulti_watchdog(hc); | |
2541 | ||
2542 | if (hc->leds) | |
2543 | hfcmulti_leds(hc); | |
2544 | } | |
2545 | ||
2546 | static void | |
2547 | ph_state_irq(struct hfc_multi *hc, u_char r_irq_statech) | |
2548 | { | |
2549 | struct dchannel *dch; | |
2550 | int ch; | |
2551 | int active; | |
2552 | u_char st_status, temp; | |
2553 | ||
2554 | /* state machine */ | |
2555 | for (ch = 0; ch <= 31; ch++) { | |
2556 | if (hc->chan[ch].dch) { | |
2557 | dch = hc->chan[ch].dch; | |
2558 | if (r_irq_statech & 1) { | |
2559 | HFC_outb_nodebug(hc, R_ST_SEL, | |
2560 | hc->chan[ch].port); | |
2561 | /* undocumented: delay after R_ST_SEL */ | |
2562 | udelay(1); | |
2563 | /* undocumented: status changes during read */ | |
2564 | st_status = HFC_inb_nodebug(hc, A_ST_RD_STATE); | |
2565 | while (st_status != (temp = | |
2566 | HFC_inb_nodebug(hc, A_ST_RD_STATE))) { | |
2567 | if (debug & DEBUG_HFCMULTI_STATE) | |
2568 | printk(KERN_DEBUG "%s: reread " | |
2569 | "STATE because %d!=%d\n", | |
2570 | __func__, temp, | |
2571 | st_status); | |
2572 | st_status = temp; /* repeat */ | |
2573 | } | |
2574 | ||
2575 | /* Speech Design TE-sync indication */ | |
2576 | if (test_bit(HFC_CHIP_PLXSD, &hc->chip) && | |
2577 | dch->dev.D.protocol == ISDN_P_TE_S0) { | |
2578 | if (st_status & V_FR_SYNC_ST) | |
2579 | hc->syncronized |= | |
2580 | (1 << hc->chan[ch].port); | |
2581 | else | |
2582 | hc->syncronized &= | |
2583 | ~(1 << hc->chan[ch].port); | |
2584 | } | |
2585 | dch->state = st_status & 0x0f; | |
2586 | if (dch->dev.D.protocol == ISDN_P_NT_S0) | |
2587 | active = 3; | |
2588 | else | |
2589 | active = 7; | |
2590 | if (dch->state == active) { | |
2591 | HFC_outb_nodebug(hc, R_FIFO, | |
2592 | (ch << 1) | 1); | |
2593 | HFC_wait_nodebug(hc); | |
2594 | HFC_outb_nodebug(hc, | |
2595 | R_INC_RES_FIFO, V_RES_F); | |
2596 | HFC_wait_nodebug(hc); | |
2597 | dch->tx_idx = 0; | |
2598 | } | |
2599 | schedule_event(dch, FLG_PHCHANGE); | |
2600 | if (debug & DEBUG_HFCMULTI_STATE) | |
2601 | printk(KERN_DEBUG | |
2602 | "%s: S/T newstate %x port %d\n", | |
2603 | __func__, dch->state, | |
2604 | hc->chan[ch].port); | |
2605 | } | |
2606 | r_irq_statech >>= 1; | |
2607 | } | |
2608 | } | |
2609 | if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) | |
2610 | plxsd_checksync(hc, 0); | |
2611 | } | |
2612 | ||
2613 | static void | |
2614 | fifo_irq(struct hfc_multi *hc, int block) | |
2615 | { | |
2616 | int ch, j; | |
2617 | struct dchannel *dch; | |
2618 | struct bchannel *bch; | |
2619 | u_char r_irq_fifo_bl; | |
2620 | ||
2621 | r_irq_fifo_bl = HFC_inb_nodebug(hc, R_IRQ_FIFO_BL0 + block); | |
2622 | j = 0; | |
2623 | while (j < 8) { | |
2624 | ch = (block << 2) + (j >> 1); | |
2625 | dch = hc->chan[ch].dch; | |
2626 | bch = hc->chan[ch].bch; | |
2627 | if (((!dch) && (!bch)) || (!hc->created[hc->chan[ch].port])) { | |
2628 | j += 2; | |
2629 | continue; | |
2630 | } | |
2631 | if (dch && (r_irq_fifo_bl & (1 << j)) && | |
2632 | test_bit(FLG_ACTIVE, &dch->Flags)) { | |
2633 | hfcmulti_tx(hc, ch); | |
2634 | /* start fifo */ | |
2635 | HFC_outb_nodebug(hc, R_FIFO, 0); | |
2636 | HFC_wait_nodebug(hc); | |
2637 | } | |
2638 | if (bch && (r_irq_fifo_bl & (1 << j)) && | |
2639 | test_bit(FLG_ACTIVE, &bch->Flags)) { | |
2640 | hfcmulti_tx(hc, ch); | |
2641 | /* start fifo */ | |
2642 | HFC_outb_nodebug(hc, R_FIFO, 0); | |
2643 | HFC_wait_nodebug(hc); | |
2644 | } | |
2645 | j++; | |
2646 | if (dch && (r_irq_fifo_bl & (1 << j)) && | |
2647 | test_bit(FLG_ACTIVE, &dch->Flags)) { | |
2648 | hfcmulti_rx(hc, ch); | |
2649 | } | |
2650 | if (bch && (r_irq_fifo_bl & (1 << j)) && | |
2651 | test_bit(FLG_ACTIVE, &bch->Flags)) { | |
2652 | hfcmulti_rx(hc, ch); | |
2653 | } | |
2654 | j++; | |
2655 | } | |
2656 | } | |
2657 | ||
2658 | #ifdef IRQ_DEBUG | |
2659 | int irqsem; | |
2660 | #endif | |
2661 | static irqreturn_t | |
2662 | hfcmulti_interrupt(int intno, void *dev_id) | |
2663 | { | |
2664 | #ifdef IRQCOUNT_DEBUG | |
2665 | static int iq1 = 0, iq2 = 0, iq3 = 0, iq4 = 0, | |
2666 | iq5 = 0, iq6 = 0, iqcnt = 0; | |
2667 | #endif | |
af69fb3a KK |
2668 | struct hfc_multi *hc = dev_id; |
2669 | struct dchannel *dch; | |
2670 | u_char r_irq_statech, status, r_irq_misc, r_irq_oview; | |
2671 | int i; | |
c31655fc HE |
2672 | void __iomem *plx_acc; |
2673 | u_short wval; | |
af69fb3a KK |
2674 | u_char e1_syncsta, temp; |
2675 | u_long flags; | |
2676 | ||
2677 | if (!hc) { | |
2678 | printk(KERN_ERR "HFC-multi: Spurious interrupt!\n"); | |
2679 | return IRQ_NONE; | |
2680 | } | |
2681 | ||
2682 | spin_lock(&hc->lock); | |
2683 | ||
2684 | #ifdef IRQ_DEBUG | |
2685 | if (irqsem) | |
2686 | printk(KERN_ERR "irq for card %d during irq from " | |
2687 | "card %d, this is no bug.\n", hc->id + 1, irqsem); | |
2688 | irqsem = hc->id + 1; | |
2689 | #endif | |
db9bb63a KK |
2690 | #ifdef CONFIG_MISDN_HFCMULTI_8xx |
2691 | if (hc->immap->im_cpm.cp_pbdat & hc->pb_irqmsk) | |
2692 | goto irq_notforus; | |
2693 | #endif | |
af69fb3a KK |
2694 | if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { |
2695 | spin_lock_irqsave(&plx_lock, flags); | |
c31655fc | 2696 | plx_acc = hc->plx_membase + PLX_INTCSR; |
af69fb3a KK |
2697 | wval = readw(plx_acc); |
2698 | spin_unlock_irqrestore(&plx_lock, flags); | |
2699 | if (!(wval & PLX_INTCSR_LINTI1_STATUS)) | |
2700 | goto irq_notforus; | |
2701 | } | |
2702 | ||
2703 | status = HFC_inb_nodebug(hc, R_STATUS); | |
2704 | r_irq_statech = HFC_inb_nodebug(hc, R_IRQ_STATECH); | |
2705 | #ifdef IRQCOUNT_DEBUG | |
2706 | if (r_irq_statech) | |
2707 | iq1++; | |
2708 | if (status & V_DTMF_STA) | |
2709 | iq2++; | |
2710 | if (status & V_LOST_STA) | |
2711 | iq3++; | |
2712 | if (status & V_EXT_IRQSTA) | |
2713 | iq4++; | |
2714 | if (status & V_MISC_IRQSTA) | |
2715 | iq5++; | |
2716 | if (status & V_FR_IRQSTA) | |
2717 | iq6++; | |
2718 | if (iqcnt++ > 5000) { | |
2719 | printk(KERN_ERR "iq1:%x iq2:%x iq3:%x iq4:%x iq5:%x iq6:%x\n", | |
2720 | iq1, iq2, iq3, iq4, iq5, iq6); | |
2721 | iqcnt = 0; | |
2722 | } | |
2723 | #endif | |
3bd69ad1 | 2724 | |
af69fb3a KK |
2725 | if (!r_irq_statech && |
2726 | !(status & (V_DTMF_STA | V_LOST_STA | V_EXT_IRQSTA | | |
2727 | V_MISC_IRQSTA | V_FR_IRQSTA))) { | |
2728 | /* irq is not for us */ | |
2729 | goto irq_notforus; | |
2730 | } | |
2731 | hc->irqcnt++; | |
2732 | if (r_irq_statech) { | |
db9bb63a | 2733 | if (hc->ctype != HFC_TYPE_E1) |
af69fb3a KK |
2734 | ph_state_irq(hc, r_irq_statech); |
2735 | } | |
2736 | if (status & V_EXT_IRQSTA) | |
2737 | ; /* external IRQ */ | |
2738 | if (status & V_LOST_STA) { | |
2739 | /* LOST IRQ */ | |
2740 | HFC_outb(hc, R_INC_RES_FIFO, V_RES_LOST); /* clear irq! */ | |
2741 | } | |
2742 | if (status & V_MISC_IRQSTA) { | |
2743 | /* misc IRQ */ | |
2744 | r_irq_misc = HFC_inb_nodebug(hc, R_IRQ_MISC); | |
9e6115f2 | 2745 | r_irq_misc &= hc->hw.r_irqmsk_misc; /* ignore disabled irqs */ |
af69fb3a | 2746 | if (r_irq_misc & V_STA_IRQ) { |
db9bb63a | 2747 | if (hc->ctype == HFC_TYPE_E1) { |
af69fb3a KK |
2748 | /* state machine */ |
2749 | dch = hc->chan[hc->dslot].dch; | |
2750 | e1_syncsta = HFC_inb_nodebug(hc, R_SYNC_STA); | |
2751 | if (test_bit(HFC_CHIP_PLXSD, &hc->chip) | |
2752 | && hc->e1_getclock) { | |
2753 | if (e1_syncsta & V_FR_SYNC_E1) | |
2754 | hc->syncronized = 1; | |
2755 | else | |
2756 | hc->syncronized = 0; | |
2757 | } | |
2758 | /* undocumented: status changes during read */ | |
2759 | dch->state = HFC_inb_nodebug(hc, R_E1_RD_STA); | |
2760 | while (dch->state != (temp = | |
2761 | HFC_inb_nodebug(hc, R_E1_RD_STA))) { | |
2762 | if (debug & DEBUG_HFCMULTI_STATE) | |
2763 | printk(KERN_DEBUG "%s: reread " | |
2764 | "STATE because %d!=%d\n", | |
2765 | __func__, temp, | |
2766 | dch->state); | |
2767 | dch->state = temp; /* repeat */ | |
2768 | } | |
2769 | dch->state = HFC_inb_nodebug(hc, R_E1_RD_STA) | |
2770 | & 0x7; | |
2771 | schedule_event(dch, FLG_PHCHANGE); | |
2772 | if (debug & DEBUG_HFCMULTI_STATE) | |
2773 | printk(KERN_DEBUG | |
2774 | "%s: E1 (id=%d) newstate %x\n", | |
2775 | __func__, hc->id, dch->state); | |
2776 | if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) | |
2777 | plxsd_checksync(hc, 0); | |
2778 | } | |
2779 | } | |
3bd69ad1 AE |
2780 | if (r_irq_misc & V_TI_IRQ) { |
2781 | if (hc->iclock_on) | |
2782 | mISDN_clock_update(hc->iclock, poll, NULL); | |
af69fb3a | 2783 | handle_timer_irq(hc); |
3bd69ad1 | 2784 | } |
af69fb3a | 2785 | |
eac74af9 | 2786 | if (r_irq_misc & V_DTMF_IRQ) |
af69fb3a | 2787 | hfcmulti_dtmf(hc); |
eac74af9 | 2788 | |
af69fb3a | 2789 | if (r_irq_misc & V_IRQ_PROC) { |
69e656cc KK |
2790 | static int irq_proc_cnt; |
2791 | if (!irq_proc_cnt++) | |
eac74af9 | 2792 | printk(KERN_DEBUG "%s: got V_IRQ_PROC -" |
69e656cc | 2793 | " this should not happen\n", __func__); |
af69fb3a KK |
2794 | } |
2795 | ||
2796 | } | |
2797 | if (status & V_FR_IRQSTA) { | |
2798 | /* FIFO IRQ */ | |
2799 | r_irq_oview = HFC_inb_nodebug(hc, R_IRQ_OVIEW); | |
2800 | for (i = 0; i < 8; i++) { | |
2801 | if (r_irq_oview & (1 << i)) | |
2802 | fifo_irq(hc, i); | |
2803 | } | |
2804 | } | |
2805 | ||
2806 | #ifdef IRQ_DEBUG | |
2807 | irqsem = 0; | |
2808 | #endif | |
2809 | spin_unlock(&hc->lock); | |
2810 | return IRQ_HANDLED; | |
2811 | ||
2812 | irq_notforus: | |
2813 | #ifdef IRQ_DEBUG | |
2814 | irqsem = 0; | |
2815 | #endif | |
2816 | spin_unlock(&hc->lock); | |
2817 | return IRQ_NONE; | |
2818 | } | |
2819 | ||
2820 | ||
2821 | /* | |
2822 | * timer callback for D-chan busy resolution. Currently no function | |
2823 | */ | |
2824 | ||
2825 | static void | |
2826 | hfcmulti_dbusy_timer(struct hfc_multi *hc) | |
2827 | { | |
2828 | } | |
2829 | ||
2830 | ||
2831 | /* | |
2832 | * activate/deactivate hardware for selected channels and mode | |
2833 | * | |
2834 | * configure B-channel with the given protocol | |
2835 | * ch eqals to the HFC-channel (0-31) | |
2836 | * ch is the number of channel (0-4,4-7,8-11,12-15,16-19,20-23,24-27,28-31 | |
2837 | * for S/T, 1-31 for E1) | |
2838 | * the hdlc interrupts will be set/unset | |
2839 | */ | |
2840 | static int | |
2841 | mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx, | |
2842 | int bank_tx, int slot_rx, int bank_rx) | |
2843 | { | |
2844 | int flow_tx = 0, flow_rx = 0, routing = 0; | |
2845 | int oslot_tx, oslot_rx; | |
2846 | int conf; | |
2847 | ||
2848 | if (ch < 0 || ch > 31) | |
2849 | return EINVAL; | |
2850 | oslot_tx = hc->chan[ch].slot_tx; | |
2851 | oslot_rx = hc->chan[ch].slot_rx; | |
2852 | conf = hc->chan[ch].conf; | |
2853 | ||
2854 | if (debug & DEBUG_HFCMULTI_MODE) | |
2855 | printk(KERN_DEBUG | |
2856 | "%s: card %d channel %d protocol %x slot old=%d new=%d " | |
2857 | "bank new=%d (TX) slot old=%d new=%d bank new=%d (RX)\n", | |
2858 | __func__, hc->id, ch, protocol, oslot_tx, slot_tx, | |
2859 | bank_tx, oslot_rx, slot_rx, bank_rx); | |
2860 | ||
2861 | if (oslot_tx >= 0 && slot_tx != oslot_tx) { | |
2862 | /* remove from slot */ | |
2863 | if (debug & DEBUG_HFCMULTI_MODE) | |
2864 | printk(KERN_DEBUG "%s: remove from slot %d (TX)\n", | |
2865 | __func__, oslot_tx); | |
2866 | if (hc->slot_owner[oslot_tx<<1] == ch) { | |
2867 | HFC_outb(hc, R_SLOT, oslot_tx << 1); | |
2868 | HFC_outb(hc, A_SL_CFG, 0); | |
db9bb63a KK |
2869 | if (hc->ctype != HFC_TYPE_XHFC) |
2870 | HFC_outb(hc, A_CONF, 0); | |
af69fb3a KK |
2871 | hc->slot_owner[oslot_tx<<1] = -1; |
2872 | } else { | |
2873 | if (debug & DEBUG_HFCMULTI_MODE) | |
2874 | printk(KERN_DEBUG | |
2875 | "%s: we are not owner of this tx slot " | |
2876 | "anymore, channel %d is.\n", | |
2877 | __func__, hc->slot_owner[oslot_tx<<1]); | |
2878 | } | |
2879 | } | |
2880 | ||
2881 | if (oslot_rx >= 0 && slot_rx != oslot_rx) { | |
2882 | /* remove from slot */ | |
2883 | if (debug & DEBUG_HFCMULTI_MODE) | |
2884 | printk(KERN_DEBUG | |
2885 | "%s: remove from slot %d (RX)\n", | |
2886 | __func__, oslot_rx); | |
2887 | if (hc->slot_owner[(oslot_rx << 1) | 1] == ch) { | |
2888 | HFC_outb(hc, R_SLOT, (oslot_rx << 1) | V_SL_DIR); | |
2889 | HFC_outb(hc, A_SL_CFG, 0); | |
2890 | hc->slot_owner[(oslot_rx << 1) | 1] = -1; | |
2891 | } else { | |
2892 | if (debug & DEBUG_HFCMULTI_MODE) | |
2893 | printk(KERN_DEBUG | |
2894 | "%s: we are not owner of this rx slot " | |
2895 | "anymore, channel %d is.\n", | |
2896 | __func__, | |
2897 | hc->slot_owner[(oslot_rx << 1) | 1]); | |
2898 | } | |
2899 | } | |
2900 | ||
2901 | if (slot_tx < 0) { | |
2902 | flow_tx = 0x80; /* FIFO->ST */ | |
2903 | /* disable pcm slot */ | |
2904 | hc->chan[ch].slot_tx = -1; | |
2905 | hc->chan[ch].bank_tx = 0; | |
2906 | } else { | |
2907 | /* set pcm slot */ | |
2908 | if (hc->chan[ch].txpending) | |
2909 | flow_tx = 0x80; /* FIFO->ST */ | |
2910 | else | |
2911 | flow_tx = 0xc0; /* PCM->ST */ | |
2912 | /* put on slot */ | |
2913 | routing = bank_tx ? 0xc0 : 0x80; | |
2914 | if (conf >= 0 || bank_tx > 1) | |
2915 | routing = 0x40; /* loop */ | |
2916 | if (debug & DEBUG_HFCMULTI_MODE) | |
2917 | printk(KERN_DEBUG "%s: put channel %d to slot %d bank" | |
2918 | " %d flow %02x routing %02x conf %d (TX)\n", | |
2919 | __func__, ch, slot_tx, bank_tx, | |
2920 | flow_tx, routing, conf); | |
2921 | HFC_outb(hc, R_SLOT, slot_tx << 1); | |
2922 | HFC_outb(hc, A_SL_CFG, (ch<<1) | routing); | |
db9bb63a KK |
2923 | if (hc->ctype != HFC_TYPE_XHFC) |
2924 | HFC_outb(hc, A_CONF, | |
2925 | (conf < 0) ? 0 : (conf | V_CONF_SL)); | |
af69fb3a KK |
2926 | hc->slot_owner[slot_tx << 1] = ch; |
2927 | hc->chan[ch].slot_tx = slot_tx; | |
2928 | hc->chan[ch].bank_tx = bank_tx; | |
2929 | } | |
2930 | if (slot_rx < 0) { | |
2931 | /* disable pcm slot */ | |
2932 | flow_rx = 0x80; /* ST->FIFO */ | |
2933 | hc->chan[ch].slot_rx = -1; | |
2934 | hc->chan[ch].bank_rx = 0; | |
2935 | } else { | |
2936 | /* set pcm slot */ | |
2937 | if (hc->chan[ch].txpending) | |
2938 | flow_rx = 0x80; /* ST->FIFO */ | |
2939 | else | |
2940 | flow_rx = 0xc0; /* ST->(FIFO,PCM) */ | |
2941 | /* put on slot */ | |
eac74af9 | 2942 | routing = bank_rx ? 0x80 : 0xc0; /* reversed */ |
af69fb3a KK |
2943 | if (conf >= 0 || bank_rx > 1) |
2944 | routing = 0x40; /* loop */ | |
2945 | if (debug & DEBUG_HFCMULTI_MODE) | |
2946 | printk(KERN_DEBUG "%s: put channel %d to slot %d bank" | |
2947 | " %d flow %02x routing %02x conf %d (RX)\n", | |
2948 | __func__, ch, slot_rx, bank_rx, | |
2949 | flow_rx, routing, conf); | |
2950 | HFC_outb(hc, R_SLOT, (slot_rx<<1) | V_SL_DIR); | |
2951 | HFC_outb(hc, A_SL_CFG, (ch<<1) | V_CH_DIR | routing); | |
2952 | hc->slot_owner[(slot_rx<<1)|1] = ch; | |
2953 | hc->chan[ch].slot_rx = slot_rx; | |
2954 | hc->chan[ch].bank_rx = bank_rx; | |
2955 | } | |
2956 | ||
2957 | switch (protocol) { | |
2958 | case (ISDN_P_NONE): | |
2959 | /* disable TX fifo */ | |
2960 | HFC_outb(hc, R_FIFO, ch << 1); | |
2961 | HFC_wait(hc); | |
2962 | HFC_outb(hc, A_CON_HDLC, flow_tx | 0x00 | V_IFF); | |
2963 | HFC_outb(hc, A_SUBCH_CFG, 0); | |
2964 | HFC_outb(hc, A_IRQ_MSK, 0); | |
2965 | HFC_outb(hc, R_INC_RES_FIFO, V_RES_F); | |
2966 | HFC_wait(hc); | |
2967 | /* disable RX fifo */ | |
2968 | HFC_outb(hc, R_FIFO, (ch<<1)|1); | |
2969 | HFC_wait(hc); | |
2970 | HFC_outb(hc, A_CON_HDLC, flow_rx | 0x00); | |
2971 | HFC_outb(hc, A_SUBCH_CFG, 0); | |
2972 | HFC_outb(hc, A_IRQ_MSK, 0); | |
2973 | HFC_outb(hc, R_INC_RES_FIFO, V_RES_F); | |
2974 | HFC_wait(hc); | |
db9bb63a | 2975 | if (hc->chan[ch].bch && hc->ctype != HFC_TYPE_E1) { |
af69fb3a | 2976 | hc->hw.a_st_ctrl0[hc->chan[ch].port] &= |
eac74af9 | 2977 | ((ch & 0x3) == 0) ? ~V_B1_EN : ~V_B2_EN; |
af69fb3a KK |
2978 | HFC_outb(hc, R_ST_SEL, hc->chan[ch].port); |
2979 | /* undocumented: delay after R_ST_SEL */ | |
2980 | udelay(1); | |
2981 | HFC_outb(hc, A_ST_CTRL0, | |
2982 | hc->hw.a_st_ctrl0[hc->chan[ch].port]); | |
2983 | } | |
2984 | if (hc->chan[ch].bch) { | |
2985 | test_and_clear_bit(FLG_HDLC, &hc->chan[ch].bch->Flags); | |
2986 | test_and_clear_bit(FLG_TRANSPARENT, | |
2987 | &hc->chan[ch].bch->Flags); | |
2988 | } | |
2989 | break; | |
2990 | case (ISDN_P_B_RAW): /* B-channel */ | |
2991 | ||
2992 | if (test_bit(HFC_CHIP_B410P, &hc->chip) && | |
2993 | (hc->chan[ch].slot_rx < 0) && | |
2994 | (hc->chan[ch].slot_tx < 0)) { | |
2995 | ||
2996 | printk(KERN_DEBUG | |
2997 | "Setting B-channel %d to echo cancelable " | |
2998 | "state on PCM slot %d\n", ch, | |
2999 | ((ch / 4) * 8) + ((ch % 4) * 4) + 1); | |
3000 | printk(KERN_DEBUG | |
3001 | "Enabling pass through for channel\n"); | |
3002 | vpm_out(hc, ch, ((ch / 4) * 8) + | |
3003 | ((ch % 4) * 4) + 1, 0x01); | |
3004 | /* rx path */ | |
3005 | /* S/T -> PCM */ | |
3006 | HFC_outb(hc, R_FIFO, (ch << 1)); | |
3007 | HFC_wait(hc); | |
3008 | HFC_outb(hc, A_CON_HDLC, 0xc0 | V_HDLC_TRP | V_IFF); | |
3009 | HFC_outb(hc, R_SLOT, (((ch / 4) * 8) + | |
3010 | ((ch % 4) * 4) + 1) << 1); | |
3011 | HFC_outb(hc, A_SL_CFG, 0x80 | (ch << 1)); | |
3012 | ||
3013 | /* PCM -> FIFO */ | |
3014 | HFC_outb(hc, R_FIFO, 0x20 | (ch << 1) | 1); | |
3015 | HFC_wait(hc); | |
3016 | HFC_outb(hc, A_CON_HDLC, 0x20 | V_HDLC_TRP | V_IFF); | |
3017 | HFC_outb(hc, A_SUBCH_CFG, 0); | |
3018 | HFC_outb(hc, A_IRQ_MSK, 0); | |
3019 | HFC_outb(hc, R_INC_RES_FIFO, V_RES_F); | |
3020 | HFC_wait(hc); | |
3021 | HFC_outb(hc, R_SLOT, ((((ch / 4) * 8) + | |
3022 | ((ch % 4) * 4) + 1) << 1) | 1); | |
3023 | HFC_outb(hc, A_SL_CFG, 0x80 | 0x20 | (ch << 1) | 1); | |
3024 | ||
3025 | /* tx path */ | |
3026 | /* PCM -> S/T */ | |
3027 | HFC_outb(hc, R_FIFO, (ch << 1) | 1); | |
3028 | HFC_wait(hc); | |
3029 | HFC_outb(hc, A_CON_HDLC, 0xc0 | V_HDLC_TRP | V_IFF); | |
3030 | HFC_outb(hc, R_SLOT, ((((ch / 4) * 8) + | |
3031 | ((ch % 4) * 4)) << 1) | 1); | |
3032 | HFC_outb(hc, A_SL_CFG, 0x80 | 0x40 | (ch << 1) | 1); | |
3033 | ||
3034 | /* FIFO -> PCM */ | |
3035 | HFC_outb(hc, R_FIFO, 0x20 | (ch << 1)); | |
3036 | HFC_wait(hc); | |
3037 | HFC_outb(hc, A_CON_HDLC, 0x20 | V_HDLC_TRP | V_IFF); | |
3038 | HFC_outb(hc, A_SUBCH_CFG, 0); | |
3039 | HFC_outb(hc, A_IRQ_MSK, 0); | |
3040 | HFC_outb(hc, R_INC_RES_FIFO, V_RES_F); | |
3041 | HFC_wait(hc); | |
3042 | /* tx silence */ | |
8dd2f36f | 3043 | HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, hc->silence); |
af69fb3a KK |
3044 | HFC_outb(hc, R_SLOT, (((ch / 4) * 8) + |
3045 | ((ch % 4) * 4)) << 1); | |
3046 | HFC_outb(hc, A_SL_CFG, 0x80 | 0x20 | (ch << 1)); | |
3047 | } else { | |
3048 | /* enable TX fifo */ | |
3049 | HFC_outb(hc, R_FIFO, ch << 1); | |
3050 | HFC_wait(hc); | |
db9bb63a KK |
3051 | if (hc->ctype == HFC_TYPE_XHFC) |
3052 | HFC_outb(hc, A_CON_HDLC, flow_tx | 0x07 << 2 | | |
3053 | V_HDLC_TRP | V_IFF); | |
3054 | /* Enable FIFO, no interrupt */ | |
3055 | else | |
3056 | HFC_outb(hc, A_CON_HDLC, flow_tx | 0x00 | | |
3057 | V_HDLC_TRP | V_IFF); | |
af69fb3a KK |
3058 | HFC_outb(hc, A_SUBCH_CFG, 0); |
3059 | HFC_outb(hc, A_IRQ_MSK, 0); | |
3060 | HFC_outb(hc, R_INC_RES_FIFO, V_RES_F); | |
3061 | HFC_wait(hc); | |
3062 | /* tx silence */ | |
8dd2f36f | 3063 | HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, hc->silence); |
af69fb3a KK |
3064 | /* enable RX fifo */ |
3065 | HFC_outb(hc, R_FIFO, (ch<<1)|1); | |
3066 | HFC_wait(hc); | |
db9bb63a KK |
3067 | if (hc->ctype == HFC_TYPE_XHFC) |
3068 | HFC_outb(hc, A_CON_HDLC, flow_rx | 0x07 << 2 | | |
3069 | V_HDLC_TRP); | |
3070 | /* Enable FIFO, no interrupt*/ | |
3071 | else | |
3072 | HFC_outb(hc, A_CON_HDLC, flow_rx | 0x00 | | |
3073 | V_HDLC_TRP); | |
af69fb3a KK |
3074 | HFC_outb(hc, A_SUBCH_CFG, 0); |
3075 | HFC_outb(hc, A_IRQ_MSK, 0); | |
3076 | HFC_outb(hc, R_INC_RES_FIFO, V_RES_F); | |
3077 | HFC_wait(hc); | |
3078 | } | |
db9bb63a | 3079 | if (hc->ctype != HFC_TYPE_E1) { |
af69fb3a KK |
3080 | hc->hw.a_st_ctrl0[hc->chan[ch].port] |= |
3081 | ((ch & 0x3) == 0) ? V_B1_EN : V_B2_EN; | |
3082 | HFC_outb(hc, R_ST_SEL, hc->chan[ch].port); | |
3083 | /* undocumented: delay after R_ST_SEL */ | |
3084 | udelay(1); | |
3085 | HFC_outb(hc, A_ST_CTRL0, | |
3086 | hc->hw.a_st_ctrl0[hc->chan[ch].port]); | |
3087 | } | |
3088 | if (hc->chan[ch].bch) | |
3089 | test_and_set_bit(FLG_TRANSPARENT, | |
3090 | &hc->chan[ch].bch->Flags); | |
3091 | break; | |
3092 | case (ISDN_P_B_HDLC): /* B-channel */ | |
3093 | case (ISDN_P_TE_S0): /* D-channel */ | |
3094 | case (ISDN_P_NT_S0): | |
3095 | case (ISDN_P_TE_E1): | |
3096 | case (ISDN_P_NT_E1): | |
3097 | /* enable TX fifo */ | |
3098 | HFC_outb(hc, R_FIFO, ch<<1); | |
3099 | HFC_wait(hc); | |
db9bb63a | 3100 | if (hc->ctype == HFC_TYPE_E1 || hc->chan[ch].bch) { |
af69fb3a KK |
3101 | /* E1 or B-channel */ |
3102 | HFC_outb(hc, A_CON_HDLC, flow_tx | 0x04); | |
3103 | HFC_outb(hc, A_SUBCH_CFG, 0); | |
3104 | } else { | |
3105 | /* D-Channel without HDLC fill flags */ | |
3106 | HFC_outb(hc, A_CON_HDLC, flow_tx | 0x04 | V_IFF); | |
3107 | HFC_outb(hc, A_SUBCH_CFG, 2); | |
3108 | } | |
3109 | HFC_outb(hc, A_IRQ_MSK, V_IRQ); | |
3110 | HFC_outb(hc, R_INC_RES_FIFO, V_RES_F); | |
3111 | HFC_wait(hc); | |
3112 | /* enable RX fifo */ | |
3113 | HFC_outb(hc, R_FIFO, (ch<<1)|1); | |
3114 | HFC_wait(hc); | |
3115 | HFC_outb(hc, A_CON_HDLC, flow_rx | 0x04); | |
db9bb63a | 3116 | if (hc->ctype == HFC_TYPE_E1 || hc->chan[ch].bch) |
af69fb3a KK |
3117 | HFC_outb(hc, A_SUBCH_CFG, 0); /* full 8 bits */ |
3118 | else | |
3119 | HFC_outb(hc, A_SUBCH_CFG, 2); /* 2 bits dchannel */ | |
3120 | HFC_outb(hc, A_IRQ_MSK, V_IRQ); | |
3121 | HFC_outb(hc, R_INC_RES_FIFO, V_RES_F); | |
3122 | HFC_wait(hc); | |
3123 | if (hc->chan[ch].bch) { | |
3124 | test_and_set_bit(FLG_HDLC, &hc->chan[ch].bch->Flags); | |
db9bb63a | 3125 | if (hc->ctype != HFC_TYPE_E1) { |
af69fb3a KK |
3126 | hc->hw.a_st_ctrl0[hc->chan[ch].port] |= |
3127 | ((ch&0x3) == 0) ? V_B1_EN : V_B2_EN; | |
3128 | HFC_outb(hc, R_ST_SEL, hc->chan[ch].port); | |
3129 | /* undocumented: delay after R_ST_SEL */ | |
3130 | udelay(1); | |
3131 | HFC_outb(hc, A_ST_CTRL0, | |
3132 | hc->hw.a_st_ctrl0[hc->chan[ch].port]); | |
3133 | } | |
3134 | } | |
3135 | break; | |
3136 | default: | |
3137 | printk(KERN_DEBUG "%s: protocol not known %x\n", | |
3138 | __func__, protocol); | |
3139 | hc->chan[ch].protocol = ISDN_P_NONE; | |
3140 | return -ENOPROTOOPT; | |
3141 | } | |
3142 | hc->chan[ch].protocol = protocol; | |
3143 | return 0; | |
3144 | } | |
3145 | ||
3146 | ||
3147 | /* | |
3148 | * connect/disconnect PCM | |
3149 | */ | |
3150 | ||
3151 | static void | |
3152 | hfcmulti_pcm(struct hfc_multi *hc, int ch, int slot_tx, int bank_tx, | |
3153 | int slot_rx, int bank_rx) | |
3154 | { | |
3155 | if (slot_rx < 0 || slot_rx < 0 || bank_tx < 0 || bank_rx < 0) { | |
3156 | /* disable PCM */ | |
3157 | mode_hfcmulti(hc, ch, hc->chan[ch].protocol, -1, 0, -1, 0); | |
3158 | return; | |
3159 | } | |
3160 | ||
3161 | /* enable pcm */ | |
3162 | mode_hfcmulti(hc, ch, hc->chan[ch].protocol, slot_tx, bank_tx, | |
3163 | slot_rx, bank_rx); | |
3164 | } | |
3165 | ||
3166 | /* | |
3167 | * set/disable conference | |
3168 | */ | |
3169 | ||
3170 | static void | |
3171 | hfcmulti_conf(struct hfc_multi *hc, int ch, int num) | |
3172 | { | |
3173 | if (num >= 0 && num <= 7) | |
3174 | hc->chan[ch].conf = num; | |
3175 | else | |
3176 | hc->chan[ch].conf = -1; | |
3177 | mode_hfcmulti(hc, ch, hc->chan[ch].protocol, hc->chan[ch].slot_tx, | |
3178 | hc->chan[ch].bank_tx, hc->chan[ch].slot_rx, | |
3179 | hc->chan[ch].bank_rx); | |
3180 | } | |
3181 | ||
3182 | ||
3183 | /* | |
3184 | * set/disable sample loop | |
3185 | */ | |
3186 | ||
3187 | /* NOTE: this function is experimental and therefore disabled */ | |
3188 | ||
3189 | /* | |
3190 | * Layer 1 callback function | |
3191 | */ | |
3192 | static int | |
3193 | hfcm_l1callback(struct dchannel *dch, u_int cmd) | |
3194 | { | |
3195 | struct hfc_multi *hc = dch->hw; | |
3196 | u_long flags; | |
3197 | ||
3198 | switch (cmd) { | |
3199 | case INFO3_P8: | |
3200 | case INFO3_P10: | |
3201 | break; | |
3202 | case HW_RESET_REQ: | |
3203 | /* start activation */ | |
3204 | spin_lock_irqsave(&hc->lock, flags); | |
db9bb63a | 3205 | if (hc->ctype == HFC_TYPE_E1) { |
af69fb3a KK |
3206 | if (debug & DEBUG_HFCMULTI_MSG) |
3207 | printk(KERN_DEBUG | |
3208 | "%s: HW_RESET_REQ no BRI\n", | |
3209 | __func__); | |
3210 | } else { | |
3211 | HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port); | |
3212 | /* undocumented: delay after R_ST_SEL */ | |
3213 | udelay(1); | |
3214 | HFC_outb(hc, A_ST_WR_STATE, V_ST_LD_STA | 3); /* F3 */ | |
3215 | udelay(6); /* wait at least 5,21us */ | |
3216 | HFC_outb(hc, A_ST_WR_STATE, 3); | |
3217 | HFC_outb(hc, A_ST_WR_STATE, 3 | (V_ST_ACT*3)); | |
3218 | /* activate */ | |
3219 | } | |
3220 | spin_unlock_irqrestore(&hc->lock, flags); | |
3221 | l1_event(dch->l1, HW_POWERUP_IND); | |
3222 | break; | |
3223 | case HW_DEACT_REQ: | |
3224 | /* start deactivation */ | |
3225 | spin_lock_irqsave(&hc->lock, flags); | |
db9bb63a | 3226 | if (hc->ctype == HFC_TYPE_E1) { |
af69fb3a KK |
3227 | if (debug & DEBUG_HFCMULTI_MSG) |
3228 | printk(KERN_DEBUG | |
3229 | "%s: HW_DEACT_REQ no BRI\n", | |
3230 | __func__); | |
3231 | } else { | |
3232 | HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port); | |
3233 | /* undocumented: delay after R_ST_SEL */ | |
3234 | udelay(1); | |
3235 | HFC_outb(hc, A_ST_WR_STATE, V_ST_ACT*2); | |
3236 | /* deactivate */ | |
3237 | if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { | |
3238 | hc->syncronized &= | |
3239 | ~(1 << hc->chan[dch->slot].port); | |
3240 | plxsd_checksync(hc, 0); | |
3241 | } | |
3242 | } | |
3243 | skb_queue_purge(&dch->squeue); | |
3244 | if (dch->tx_skb) { | |
3245 | dev_kfree_skb(dch->tx_skb); | |
3246 | dch->tx_skb = NULL; | |
3247 | } | |
3248 | dch->tx_idx = 0; | |
3249 | if (dch->rx_skb) { | |
3250 | dev_kfree_skb(dch->rx_skb); | |
3251 | dch->rx_skb = NULL; | |
3252 | } | |
3253 | test_and_clear_bit(FLG_TX_BUSY, &dch->Flags); | |
3254 | if (test_and_clear_bit(FLG_BUSY_TIMER, &dch->Flags)) | |
3255 | del_timer(&dch->timer); | |
3256 | spin_unlock_irqrestore(&hc->lock, flags); | |
3257 | break; | |
3258 | case HW_POWERUP_REQ: | |
3259 | spin_lock_irqsave(&hc->lock, flags); | |
db9bb63a | 3260 | if (hc->ctype == HFC_TYPE_E1) { |
af69fb3a KK |
3261 | if (debug & DEBUG_HFCMULTI_MSG) |
3262 | printk(KERN_DEBUG | |
3263 | "%s: HW_POWERUP_REQ no BRI\n", | |
3264 | __func__); | |
3265 | } else { | |
3266 | HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port); | |
3267 | /* undocumented: delay after R_ST_SEL */ | |
3268 | udelay(1); | |
3269 | HFC_outb(hc, A_ST_WR_STATE, 3 | 0x10); /* activate */ | |
3270 | udelay(6); /* wait at least 5,21us */ | |
3271 | HFC_outb(hc, A_ST_WR_STATE, 3); /* activate */ | |
3272 | } | |
3273 | spin_unlock_irqrestore(&hc->lock, flags); | |
3274 | break; | |
3275 | case PH_ACTIVATE_IND: | |
3276 | test_and_set_bit(FLG_ACTIVE, &dch->Flags); | |
3277 | _queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL, | |
3278 | GFP_ATOMIC); | |
3279 | break; | |
3280 | case PH_DEACTIVATE_IND: | |
3281 | test_and_clear_bit(FLG_ACTIVE, &dch->Flags); | |
3282 | _queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL, | |
3283 | GFP_ATOMIC); | |
3284 | break; | |
3285 | default: | |
3286 | if (dch->debug & DEBUG_HW) | |
3287 | printk(KERN_DEBUG "%s: unknown command %x\n", | |
3288 | __func__, cmd); | |
3289 | return -1; | |
3290 | } | |
3291 | return 0; | |
3292 | } | |
3293 | ||
3294 | /* | |
3295 | * Layer2 -> Layer 1 Transfer | |
3296 | */ | |
3297 | ||
3298 | static int | |
3299 | handle_dmsg(struct mISDNchannel *ch, struct sk_buff *skb) | |
3300 | { | |
3301 | struct mISDNdevice *dev = container_of(ch, struct mISDNdevice, D); | |
3302 | struct dchannel *dch = container_of(dev, struct dchannel, dev); | |
3303 | struct hfc_multi *hc = dch->hw; | |
3304 | struct mISDNhead *hh = mISDN_HEAD_P(skb); | |
3305 | int ret = -EINVAL; | |
3306 | unsigned int id; | |
3307 | u_long flags; | |
3308 | ||
3309 | switch (hh->prim) { | |
3310 | case PH_DATA_REQ: | |
3311 | if (skb->len < 1) | |
3312 | break; | |
3313 | spin_lock_irqsave(&hc->lock, flags); | |
3314 | ret = dchannel_senddata(dch, skb); | |
3315 | if (ret > 0) { /* direct TX */ | |
3316 | id = hh->id; /* skb can be freed */ | |
3317 | hfcmulti_tx(hc, dch->slot); | |
3318 | ret = 0; | |
3319 | /* start fifo */ | |
3320 | HFC_outb(hc, R_FIFO, 0); | |
3321 | HFC_wait(hc); | |
3322 | spin_unlock_irqrestore(&hc->lock, flags); | |
3323 | queue_ch_frame(ch, PH_DATA_CNF, id, NULL); | |
3324 | } else | |
3325 | spin_unlock_irqrestore(&hc->lock, flags); | |
3326 | return ret; | |
3327 | case PH_ACTIVATE_REQ: | |
3328 | if (dch->dev.D.protocol != ISDN_P_TE_S0) { | |
3329 | spin_lock_irqsave(&hc->lock, flags); | |
3330 | ret = 0; | |
3331 | if (debug & DEBUG_HFCMULTI_MSG) | |
3332 | printk(KERN_DEBUG | |
3333 | "%s: PH_ACTIVATE port %d (0..%d)\n", | |
3334 | __func__, hc->chan[dch->slot].port, | |
3335 | hc->ports-1); | |
3336 | /* start activation */ | |
db9bb63a | 3337 | if (hc->ctype == HFC_TYPE_E1) { |
af69fb3a KK |
3338 | ph_state_change(dch); |
3339 | if (debug & DEBUG_HFCMULTI_STATE) | |
3340 | printk(KERN_DEBUG | |
3341 | "%s: E1 report state %x \n", | |
3342 | __func__, dch->state); | |
3343 | } else { | |
3344 | HFC_outb(hc, R_ST_SEL, | |
3345 | hc->chan[dch->slot].port); | |
3346 | /* undocumented: delay after R_ST_SEL */ | |
3347 | udelay(1); | |
3348 | HFC_outb(hc, A_ST_WR_STATE, V_ST_LD_STA | 1); | |
3349 | /* G1 */ | |
3350 | udelay(6); /* wait at least 5,21us */ | |
3351 | HFC_outb(hc, A_ST_WR_STATE, 1); | |
3352 | HFC_outb(hc, A_ST_WR_STATE, 1 | | |
3353 | (V_ST_ACT*3)); /* activate */ | |
3354 | dch->state = 1; | |
3355 | } | |
3356 | spin_unlock_irqrestore(&hc->lock, flags); | |
3357 | } else | |
3358 | ret = l1_event(dch->l1, hh->prim); | |
3359 | break; | |
3360 | case PH_DEACTIVATE_REQ: | |
3361 | test_and_clear_bit(FLG_L2_ACTIVATED, &dch->Flags); | |
3362 | if (dch->dev.D.protocol != ISDN_P_TE_S0) { | |
3363 | spin_lock_irqsave(&hc->lock, flags); | |
3364 | if (debug & DEBUG_HFCMULTI_MSG) | |
3365 | printk(KERN_DEBUG | |
3366 | "%s: PH_DEACTIVATE port %d (0..%d)\n", | |
3367 | __func__, hc->chan[dch->slot].port, | |
3368 | hc->ports-1); | |
3369 | /* start deactivation */ | |
db9bb63a | 3370 | if (hc->ctype == HFC_TYPE_E1) { |
af69fb3a KK |
3371 | if (debug & DEBUG_HFCMULTI_MSG) |
3372 | printk(KERN_DEBUG | |
3373 | "%s: PH_DEACTIVATE no BRI\n", | |
3374 | __func__); | |
3375 | } else { | |
3376 | HFC_outb(hc, R_ST_SEL, | |
3377 | hc->chan[dch->slot].port); | |
3378 | /* undocumented: delay after R_ST_SEL */ | |
3379 | udelay(1); | |
3380 | HFC_outb(hc, A_ST_WR_STATE, V_ST_ACT * 2); | |
3381 | /* deactivate */ | |
3382 | dch->state = 1; | |
3383 | } | |
3384 | skb_queue_purge(&dch->squeue); | |
3385 | if (dch->tx_skb) { | |
3386 | dev_kfree_skb(dch->tx_skb); | |
3387 | dch->tx_skb = NULL; | |
3388 | } | |
3389 | dch->tx_idx = 0; | |
3390 | if (dch->rx_skb) { | |
3391 | dev_kfree_skb(dch->rx_skb); | |
3392 | dch->rx_skb = NULL; | |
3393 | } | |
3394 | test_and_clear_bit(FLG_TX_BUSY, &dch->Flags); | |
3395 | if (test_and_clear_bit(FLG_BUSY_TIMER, &dch->Flags)) | |
3396 | del_timer(&dch->timer); | |
3397 | #ifdef FIXME | |
3398 | if (test_and_clear_bit(FLG_L1_BUSY, &dch->Flags)) | |
3399 | dchannel_sched_event(&hc->dch, D_CLEARBUSY); | |
3400 | #endif | |
3401 | ret = 0; | |
3402 | spin_unlock_irqrestore(&hc->lock, flags); | |
3403 | } else | |
3404 | ret = l1_event(dch->l1, hh->prim); | |
3405 | break; | |
3406 | } | |
3407 | if (!ret) | |
3408 | dev_kfree_skb(skb); | |
3409 | return ret; | |
3410 | } | |
3411 | ||
3412 | static void | |
3413 | deactivate_bchannel(struct bchannel *bch) | |
3414 | { | |
3415 | struct hfc_multi *hc = bch->hw; | |
3416 | u_long flags; | |
3417 | ||
3418 | spin_lock_irqsave(&hc->lock, flags); | |
3419 | if (test_and_clear_bit(FLG_TX_NEXT, &bch->Flags)) { | |
3420 | dev_kfree_skb(bch->next_skb); | |
3421 | bch->next_skb = NULL; | |
3422 | } | |
3423 | if (bch->tx_skb) { | |
3424 | dev_kfree_skb(bch->tx_skb); | |
3425 | bch->tx_skb = NULL; | |
3426 | } | |
3427 | bch->tx_idx = 0; | |
3428 | if (bch->rx_skb) { | |
3429 | dev_kfree_skb(bch->rx_skb); | |
3430 | bch->rx_skb = NULL; | |
3431 | } | |
3432 | hc->chan[bch->slot].coeff_count = 0; | |
3433 | test_and_clear_bit(FLG_ACTIVE, &bch->Flags); | |
3434 | test_and_clear_bit(FLG_TX_BUSY, &bch->Flags); | |
3435 | hc->chan[bch->slot].rx_off = 0; | |
3436 | hc->chan[bch->slot].conf = -1; | |
3437 | mode_hfcmulti(hc, bch->slot, ISDN_P_NONE, -1, 0, -1, 0); | |
3438 | spin_unlock_irqrestore(&hc->lock, flags); | |
3439 | } | |
3440 | ||
3441 | static int | |
3442 | handle_bmsg(struct mISDNchannel *ch, struct sk_buff *skb) | |
3443 | { | |
3444 | struct bchannel *bch = container_of(ch, struct bchannel, ch); | |
3445 | struct hfc_multi *hc = bch->hw; | |
3446 | int ret = -EINVAL; | |
3447 | struct mISDNhead *hh = mISDN_HEAD_P(skb); | |
3448 | unsigned int id; | |
3449 | u_long flags; | |
3450 | ||
3451 | switch (hh->prim) { | |
3452 | case PH_DATA_REQ: | |
3453 | if (!skb->len) | |
3454 | break; | |
3455 | spin_lock_irqsave(&hc->lock, flags); | |
3456 | ret = bchannel_senddata(bch, skb); | |
3457 | if (ret > 0) { /* direct TX */ | |
3458 | id = hh->id; /* skb can be freed */ | |
3459 | hfcmulti_tx(hc, bch->slot); | |
3460 | ret = 0; | |
3461 | /* start fifo */ | |
3462 | HFC_outb_nodebug(hc, R_FIFO, 0); | |
3463 | HFC_wait_nodebug(hc); | |
3464 | if (!test_bit(FLG_TRANSPARENT, &bch->Flags)) { | |
3465 | spin_unlock_irqrestore(&hc->lock, flags); | |
3466 | queue_ch_frame(ch, PH_DATA_CNF, id, NULL); | |
3467 | } else | |
3468 | spin_unlock_irqrestore(&hc->lock, flags); | |
3469 | } else | |
3470 | spin_unlock_irqrestore(&hc->lock, flags); | |
3471 | return ret; | |
3472 | case PH_ACTIVATE_REQ: | |
3473 | if (debug & DEBUG_HFCMULTI_MSG) | |
3474 | printk(KERN_DEBUG "%s: PH_ACTIVATE ch %d (0..32)\n", | |
3475 | __func__, bch->slot); | |
3476 | spin_lock_irqsave(&hc->lock, flags); | |
3477 | /* activate B-channel if not already activated */ | |
3478 | if (!test_and_set_bit(FLG_ACTIVE, &bch->Flags)) { | |
3479 | hc->chan[bch->slot].txpending = 0; | |
3480 | ret = mode_hfcmulti(hc, bch->slot, | |
3481 | ch->protocol, | |
3482 | hc->chan[bch->slot].slot_tx, | |
3483 | hc->chan[bch->slot].bank_tx, | |
3484 | hc->chan[bch->slot].slot_rx, | |
3485 | hc->chan[bch->slot].bank_rx); | |
3486 | if (!ret) { | |
3487 | if (ch->protocol == ISDN_P_B_RAW && !hc->dtmf | |
3488 | && test_bit(HFC_CHIP_DTMF, &hc->chip)) { | |
3489 | /* start decoder */ | |
3490 | hc->dtmf = 1; | |
3491 | if (debug & DEBUG_HFCMULTI_DTMF) | |
3492 | printk(KERN_DEBUG | |
3493 | "%s: start dtmf decoder\n", | |
3494 | __func__); | |
3495 | HFC_outb(hc, R_DTMF, hc->hw.r_dtmf | | |
3496 | V_RST_DTMF); | |
3497 | } | |
3498 | } | |
3499 | } else | |
3500 | ret = 0; | |
3501 | spin_unlock_irqrestore(&hc->lock, flags); | |
3502 | if (!ret) | |
3503 | _queue_data(ch, PH_ACTIVATE_IND, MISDN_ID_ANY, 0, NULL, | |
3504 | GFP_KERNEL); | |
3505 | break; | |
3506 | case PH_CONTROL_REQ: | |
3507 | spin_lock_irqsave(&hc->lock, flags); | |
3508 | switch (hh->id) { | |
3509 | case HFC_SPL_LOOP_ON: /* set sample loop */ | |
3510 | if (debug & DEBUG_HFCMULTI_MSG) | |
eac74af9 KK |
3511 | printk(KERN_DEBUG |
3512 | "%s: HFC_SPL_LOOP_ON (len = %d)\n", | |
3513 | __func__, skb->len); | |
af69fb3a KK |
3514 | ret = 0; |
3515 | break; | |
3516 | case HFC_SPL_LOOP_OFF: /* set silence */ | |
3517 | if (debug & DEBUG_HFCMULTI_MSG) | |
3518 | printk(KERN_DEBUG "%s: HFC_SPL_LOOP_OFF\n", | |
3519 | __func__); | |
3520 | ret = 0; | |
3521 | break; | |
3522 | default: | |
3523 | printk(KERN_ERR | |
3524 | "%s: unknown PH_CONTROL_REQ info %x\n", | |
3525 | __func__, hh->id); | |
3526 | ret = -EINVAL; | |
3527 | } | |
3528 | spin_unlock_irqrestore(&hc->lock, flags); | |
3529 | break; | |
3530 | case PH_DEACTIVATE_REQ: | |
3531 | deactivate_bchannel(bch); /* locked there */ | |
3532 | _queue_data(ch, PH_DEACTIVATE_IND, MISDN_ID_ANY, 0, NULL, | |
3533 | GFP_KERNEL); | |
3534 | ret = 0; | |
3535 | break; | |
3536 | } | |
3537 | if (!ret) | |
3538 | dev_kfree_skb(skb); | |
3539 | return ret; | |
3540 | } | |
3541 | ||
3542 | /* | |
3543 | * bchannel control function | |
3544 | */ | |
3545 | static int | |
3546 | channel_bctrl(struct bchannel *bch, struct mISDN_ctrl_req *cq) | |
3547 | { | |
3548 | int ret = 0; | |
3549 | struct dsp_features *features = | |
3550 | (struct dsp_features *)(*((u_long *)&cq->p1)); | |
3551 | struct hfc_multi *hc = bch->hw; | |
3552 | int slot_tx; | |
3553 | int bank_tx; | |
3554 | int slot_rx; | |
3555 | int bank_rx; | |
3556 | int num; | |
3557 | ||
3558 | switch (cq->op) { | |
3559 | case MISDN_CTRL_GETOP: | |
3560 | cq->op = MISDN_CTRL_HFC_OP | MISDN_CTRL_HW_FEATURES_OP | |
8dd2f36f | 3561 | | MISDN_CTRL_RX_OFF | MISDN_CTRL_FILL_EMPTY; |
af69fb3a KK |
3562 | break; |
3563 | case MISDN_CTRL_RX_OFF: /* turn off / on rx stream */ | |
3564 | hc->chan[bch->slot].rx_off = !!cq->p1; | |
3565 | if (!hc->chan[bch->slot].rx_off) { | |
3566 | /* reset fifo on rx on */ | |
3567 | HFC_outb_nodebug(hc, R_FIFO, (bch->slot << 1) | 1); | |
3568 | HFC_wait_nodebug(hc); | |
3569 | HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F); | |
3570 | HFC_wait_nodebug(hc); | |
3571 | } | |
3572 | if (debug & DEBUG_HFCMULTI_MSG) | |
3573 | printk(KERN_DEBUG "%s: RX_OFF request (nr=%d off=%d)\n", | |
3574 | __func__, bch->nr, hc->chan[bch->slot].rx_off); | |
3575 | break; | |
8dd2f36f AE |
3576 | case MISDN_CTRL_FILL_EMPTY: /* fill fifo, if empty */ |
3577 | test_and_set_bit(FLG_FILLEMPTY, &bch->Flags); | |
3578 | if (debug & DEBUG_HFCMULTI_MSG) | |
3579 | printk(KERN_DEBUG "%s: FILL_EMPTY request (nr=%d " | |
3580 | "off=%d)\n", __func__, bch->nr, !!cq->p1); | |
3581 | break; | |
af69fb3a KK |
3582 | case MISDN_CTRL_HW_FEATURES: /* fill features structure */ |
3583 | if (debug & DEBUG_HFCMULTI_MSG) | |
3584 | printk(KERN_DEBUG "%s: HW_FEATURE request\n", | |
3585 | __func__); | |
3586 | /* create confirm */ | |
3587 | features->hfc_id = hc->id; | |
3588 | if (test_bit(HFC_CHIP_DTMF, &hc->chip)) | |
3589 | features->hfc_dtmf = 1; | |
db9bb63a KK |
3590 | if (test_bit(HFC_CHIP_CONF, &hc->chip)) |
3591 | features->hfc_conf = 1; | |
af69fb3a KK |
3592 | features->hfc_loops = 0; |
3593 | if (test_bit(HFC_CHIP_B410P, &hc->chip)) { | |
3594 | features->hfc_echocanhw = 1; | |
3595 | } else { | |
3596 | features->pcm_id = hc->pcm; | |
3597 | features->pcm_slots = hc->slots; | |
3598 | features->pcm_banks = 2; | |
3599 | } | |
3600 | break; | |
3601 | case MISDN_CTRL_HFC_PCM_CONN: /* connect to pcm timeslot (0..N) */ | |
3602 | slot_tx = cq->p1 & 0xff; | |
3603 | bank_tx = cq->p1 >> 8; | |
3604 | slot_rx = cq->p2 & 0xff; | |
3605 | bank_rx = cq->p2 >> 8; | |
3606 | if (debug & DEBUG_HFCMULTI_MSG) | |
3607 | printk(KERN_DEBUG | |
3608 | "%s: HFC_PCM_CONN slot %d bank %d (TX) " | |
3609 | "slot %d bank %d (RX)\n", | |
3610 | __func__, slot_tx, bank_tx, | |
3611 | slot_rx, bank_rx); | |
3612 | if (slot_tx < hc->slots && bank_tx <= 2 && | |
3613 | slot_rx < hc->slots && bank_rx <= 2) | |
3614 | hfcmulti_pcm(hc, bch->slot, | |
3615 | slot_tx, bank_tx, slot_rx, bank_rx); | |
3616 | else { | |
3617 | printk(KERN_WARNING | |
3618 | "%s: HFC_PCM_CONN slot %d bank %d (TX) " | |
3619 | "slot %d bank %d (RX) out of range\n", | |
3620 | __func__, slot_tx, bank_tx, | |
3621 | slot_rx, bank_rx); | |
3622 | ret = -EINVAL; | |
3623 | } | |
3624 | break; | |
3625 | case MISDN_CTRL_HFC_PCM_DISC: /* release interface from pcm timeslot */ | |
3626 | if (debug & DEBUG_HFCMULTI_MSG) | |
3627 | printk(KERN_DEBUG "%s: HFC_PCM_DISC\n", | |
3628 | __func__); | |
3629 | hfcmulti_pcm(hc, bch->slot, -1, 0, -1, 0); | |
3630 | break; | |
3631 | case MISDN_CTRL_HFC_CONF_JOIN: /* join conference (0..7) */ | |
3632 | num = cq->p1 & 0xff; | |
3633 | if (debug & DEBUG_HFCMULTI_MSG) | |
3634 | printk(KERN_DEBUG "%s: HFC_CONF_JOIN conf %d\n", | |
3635 | __func__, num); | |
3636 | if (num <= 7) | |
3637 | hfcmulti_conf(hc, bch->slot, num); | |
3638 | else { | |
3639 | printk(KERN_WARNING | |
3640 | "%s: HW_CONF_JOIN conf %d out of range\n", | |
3641 | __func__, num); | |
3642 | ret = -EINVAL; | |
3643 | } | |
3644 | break; | |
3645 | case MISDN_CTRL_HFC_CONF_SPLIT: /* split conference */ | |
3646 | if (debug & DEBUG_HFCMULTI_MSG) | |
3647 | printk(KERN_DEBUG "%s: HFC_CONF_SPLIT\n", __func__); | |
3648 | hfcmulti_conf(hc, bch->slot, -1); | |
3649 | break; | |
3650 | case MISDN_CTRL_HFC_ECHOCAN_ON: | |
3651 | if (debug & DEBUG_HFCMULTI_MSG) | |
3652 | printk(KERN_DEBUG "%s: HFC_ECHOCAN_ON\n", __func__); | |
3653 | if (test_bit(HFC_CHIP_B410P, &hc->chip)) | |
3654 | vpm_echocan_on(hc, bch->slot, cq->p1); | |
3655 | else | |
3656 | ret = -EINVAL; | |
3657 | break; | |
3658 | ||
3659 | case MISDN_CTRL_HFC_ECHOCAN_OFF: | |
3660 | if (debug & DEBUG_HFCMULTI_MSG) | |
3661 | printk(KERN_DEBUG "%s: HFC_ECHOCAN_OFF\n", | |
3662 | __func__); | |
3663 | if (test_bit(HFC_CHIP_B410P, &hc->chip)) | |
3664 | vpm_echocan_off(hc, bch->slot); | |
3665 | else | |
3666 | ret = -EINVAL; | |
3667 | break; | |
3668 | default: | |
3669 | printk(KERN_WARNING "%s: unknown Op %x\n", | |
3670 | __func__, cq->op); | |
3671 | ret = -EINVAL; | |
3672 | break; | |
3673 | } | |
3674 | return ret; | |
3675 | } | |
3676 | ||
3677 | static int | |
3678 | hfcm_bctrl(struct mISDNchannel *ch, u_int cmd, void *arg) | |
3679 | { | |
3680 | struct bchannel *bch = container_of(ch, struct bchannel, ch); | |
3681 | struct hfc_multi *hc = bch->hw; | |
3682 | int err = -EINVAL; | |
3683 | u_long flags; | |
3684 | ||
3685 | if (bch->debug & DEBUG_HW) | |
3686 | printk(KERN_DEBUG "%s: cmd:%x %p\n", | |
3687 | __func__, cmd, arg); | |
3688 | switch (cmd) { | |
3689 | case CLOSE_CHANNEL: | |
3690 | test_and_clear_bit(FLG_OPEN, &bch->Flags); | |
3691 | if (test_bit(FLG_ACTIVE, &bch->Flags)) | |
3692 | deactivate_bchannel(bch); /* locked there */ | |
3693 | ch->protocol = ISDN_P_NONE; | |
3694 | ch->peer = NULL; | |
3695 | module_put(THIS_MODULE); | |
3696 | err = 0; | |
3697 | break; | |
3698 | case CONTROL_CHANNEL: | |
3699 | spin_lock_irqsave(&hc->lock, flags); | |
3700 | err = channel_bctrl(bch, arg); | |
3701 | spin_unlock_irqrestore(&hc->lock, flags); | |
3702 | break; | |
3703 | default: | |
3704 | printk(KERN_WARNING "%s: unknown prim(%x)\n", | |
3705 | __func__, cmd); | |
3706 | } | |
3707 | return err; | |
3708 | } | |
3709 | ||
3710 | /* | |
3711 | * handle D-channel events | |
3712 | * | |
3713 | * handle state change event | |
3714 | */ | |
3715 | static void | |
3716 | ph_state_change(struct dchannel *dch) | |
3717 | { | |
20b78804 | 3718 | struct hfc_multi *hc; |
af69fb3a KK |
3719 | int ch, i; |
3720 | ||
3721 | if (!dch) { | |
eac74af9 | 3722 | printk(KERN_WARNING "%s: ERROR given dch is NULL\n", __func__); |
af69fb3a KK |
3723 | return; |
3724 | } | |
20b78804 | 3725 | hc = dch->hw; |
af69fb3a KK |
3726 | ch = dch->slot; |
3727 | ||
db9bb63a | 3728 | if (hc->ctype == HFC_TYPE_E1) { |
af69fb3a KK |
3729 | if (dch->dev.D.protocol == ISDN_P_TE_E1) { |
3730 | if (debug & DEBUG_HFCMULTI_STATE) | |
3731 | printk(KERN_DEBUG | |
3732 | "%s: E1 TE (id=%d) newstate %x\n", | |
3733 | __func__, hc->id, dch->state); | |
3734 | } else { | |
3735 | if (debug & DEBUG_HFCMULTI_STATE) | |
3736 | printk(KERN_DEBUG | |
3737 | "%s: E1 NT (id=%d) newstate %x\n", | |
3738 | __func__, hc->id, dch->state); | |
3739 | } | |
3740 | switch (dch->state) { | |
3741 | case (1): | |
3742 | if (hc->e1_state != 1) { | |
eac74af9 KK |
3743 | for (i = 1; i <= 31; i++) { |
3744 | /* reset fifos on e1 activation */ | |
3745 | HFC_outb_nodebug(hc, R_FIFO, | |
3746 | (i << 1) | 1); | |
3747 | HFC_wait_nodebug(hc); | |
3748 | HFC_outb_nodebug(hc, R_INC_RES_FIFO, | |
3749 | V_RES_F); | |
3750 | HFC_wait_nodebug(hc); | |
3751 | } | |
af69fb3a KK |
3752 | } |
3753 | test_and_set_bit(FLG_ACTIVE, &dch->Flags); | |
3754 | _queue_data(&dch->dev.D, PH_ACTIVATE_IND, | |
3755 | MISDN_ID_ANY, 0, NULL, GFP_ATOMIC); | |
3756 | break; | |
3757 | ||
3758 | default: | |
3759 | if (hc->e1_state != 1) | |
3760 | return; | |
3761 | test_and_clear_bit(FLG_ACTIVE, &dch->Flags); | |
3762 | _queue_data(&dch->dev.D, PH_DEACTIVATE_IND, | |
3763 | MISDN_ID_ANY, 0, NULL, GFP_ATOMIC); | |
3764 | } | |
3765 | hc->e1_state = dch->state; | |
3766 | } else { | |
3767 | if (dch->dev.D.protocol == ISDN_P_TE_S0) { | |
3768 | if (debug & DEBUG_HFCMULTI_STATE) | |
3769 | printk(KERN_DEBUG | |
3770 | "%s: S/T TE newstate %x\n", | |
3771 | __func__, dch->state); | |
3772 | switch (dch->state) { | |
3773 | case (0): | |
3774 | l1_event(dch->l1, HW_RESET_IND); | |
3775 | break; | |
3776 | case (3): | |
3777 | l1_event(dch->l1, HW_DEACT_IND); | |
3778 | break; | |
3779 | case (5): | |
3780 | case (8): | |
3781 | l1_event(dch->l1, ANYSIGNAL); | |
3782 | break; | |
3783 | case (6): | |
3784 | l1_event(dch->l1, INFO2); | |
3785 | break; | |
3786 | case (7): | |
3787 | l1_event(dch->l1, INFO4_P8); | |
3788 | break; | |
3789 | } | |
3790 | } else { | |
3791 | if (debug & DEBUG_HFCMULTI_STATE) | |
3792 | printk(KERN_DEBUG "%s: S/T NT newstate %x\n", | |
3793 | __func__, dch->state); | |
3794 | switch (dch->state) { | |
3795 | case (2): | |
3796 | if (hc->chan[ch].nt_timer == 0) { | |
3797 | hc->chan[ch].nt_timer = -1; | |
3798 | HFC_outb(hc, R_ST_SEL, | |
3799 | hc->chan[ch].port); | |
3800 | /* undocumented: delay after R_ST_SEL */ | |
3801 | udelay(1); | |
3802 | HFC_outb(hc, A_ST_WR_STATE, 4 | | |
3803 | V_ST_LD_STA); /* G4 */ | |
3804 | udelay(6); /* wait at least 5,21us */ | |
3805 | HFC_outb(hc, A_ST_WR_STATE, 4); | |
3806 | dch->state = 4; | |
3807 | } else { | |
3808 | /* one extra count for the next event */ | |
3809 | hc->chan[ch].nt_timer = | |
3810 | nt_t1_count[poll_timer] + 1; | |
3811 | HFC_outb(hc, R_ST_SEL, | |
3812 | hc->chan[ch].port); | |
3813 | /* undocumented: delay after R_ST_SEL */ | |
3814 | udelay(1); | |
3815 | /* allow G2 -> G3 transition */ | |
3816 | HFC_outb(hc, A_ST_WR_STATE, 2 | | |
3817 | V_SET_G2_G3); | |
3818 | } | |
3819 | break; | |
3820 | case (1): | |
3821 | hc->chan[ch].nt_timer = -1; | |
3822 | test_and_clear_bit(FLG_ACTIVE, &dch->Flags); | |
3823 | _queue_data(&dch->dev.D, PH_DEACTIVATE_IND, | |
3824 | MISDN_ID_ANY, 0, NULL, GFP_ATOMIC); | |
3825 | break; | |
3826 | case (4): | |
3827 | hc->chan[ch].nt_timer = -1; | |
3828 | break; | |
3829 | case (3): | |
3830 | hc->chan[ch].nt_timer = -1; | |
3831 | test_and_set_bit(FLG_ACTIVE, &dch->Flags); | |
3832 | _queue_data(&dch->dev.D, PH_ACTIVATE_IND, | |
3833 | MISDN_ID_ANY, 0, NULL, GFP_ATOMIC); | |
3834 | break; | |
3835 | } | |
3836 | } | |
3837 | } | |
3838 | } | |
3839 | ||
3840 | /* | |
3841 | * called for card mode init message | |
3842 | */ | |
3843 | ||
3844 | static void | |
3845 | hfcmulti_initmode(struct dchannel *dch) | |
3846 | { | |
3847 | struct hfc_multi *hc = dch->hw; | |
3848 | u_char a_st_wr_state, r_e1_wr_sta; | |
3849 | int i, pt; | |
3850 | ||
3851 | if (debug & DEBUG_HFCMULTI_INIT) | |
3852 | printk(KERN_DEBUG "%s: entered\n", __func__); | |
3853 | ||
db9bb63a | 3854 | if (hc->ctype == HFC_TYPE_E1) { |
af69fb3a KK |
3855 | hc->chan[hc->dslot].slot_tx = -1; |
3856 | hc->chan[hc->dslot].slot_rx = -1; | |
3857 | hc->chan[hc->dslot].conf = -1; | |
3858 | if (hc->dslot) { | |
3859 | mode_hfcmulti(hc, hc->dslot, dch->dev.D.protocol, | |
3860 | -1, 0, -1, 0); | |
3861 | dch->timer.function = (void *) hfcmulti_dbusy_timer; | |
3862 | dch->timer.data = (long) dch; | |
3863 | init_timer(&dch->timer); | |
3864 | } | |
3865 | for (i = 1; i <= 31; i++) { | |
3866 | if (i == hc->dslot) | |
3867 | continue; | |
3868 | hc->chan[i].slot_tx = -1; | |
3869 | hc->chan[i].slot_rx = -1; | |
3870 | hc->chan[i].conf = -1; | |
3871 | mode_hfcmulti(hc, i, ISDN_P_NONE, -1, 0, -1, 0); | |
3872 | } | |
3873 | /* E1 */ | |
3874 | if (test_bit(HFC_CFG_REPORT_LOS, &hc->chan[hc->dslot].cfg)) { | |
3875 | HFC_outb(hc, R_LOS0, 255); /* 2 ms */ | |
3876 | HFC_outb(hc, R_LOS1, 255); /* 512 ms */ | |
3877 | } | |
3878 | if (test_bit(HFC_CFG_OPTICAL, &hc->chan[hc->dslot].cfg)) { | |
3879 | HFC_outb(hc, R_RX0, 0); | |
3880 | hc->hw.r_tx0 = 0 | V_OUT_EN; | |
3881 | } else { | |
3882 | HFC_outb(hc, R_RX0, 1); | |
3883 | hc->hw.r_tx0 = 1 | V_OUT_EN; | |
3884 | } | |
3885 | hc->hw.r_tx1 = V_ATX | V_NTRI; | |
3886 | HFC_outb(hc, R_TX0, hc->hw.r_tx0); | |
3887 | HFC_outb(hc, R_TX1, hc->hw.r_tx1); | |
3888 | HFC_outb(hc, R_TX_FR0, 0x00); | |
3889 | HFC_outb(hc, R_TX_FR1, 0xf8); | |
3890 | ||
3891 | if (test_bit(HFC_CFG_CRC4, &hc->chan[hc->dslot].cfg)) | |
3892 | HFC_outb(hc, R_TX_FR2, V_TX_MF | V_TX_E | V_NEG_E); | |
3893 | ||
3894 | HFC_outb(hc, R_RX_FR0, V_AUTO_RESYNC | V_AUTO_RECO | 0); | |
3895 | ||
3896 | if (test_bit(HFC_CFG_CRC4, &hc->chan[hc->dslot].cfg)) | |
3897 | HFC_outb(hc, R_RX_FR1, V_RX_MF | V_RX_MF_SYNC); | |
3898 | ||
3899 | if (dch->dev.D.protocol == ISDN_P_NT_E1) { | |
3900 | if (debug & DEBUG_HFCMULTI_INIT) | |
3901 | printk(KERN_DEBUG "%s: E1 port is NT-mode\n", | |
3902 | __func__); | |
3903 | r_e1_wr_sta = 0; /* G0 */ | |
3904 | hc->e1_getclock = 0; | |
3905 | } else { | |
3906 | if (debug & DEBUG_HFCMULTI_INIT) | |
3907 | printk(KERN_DEBUG "%s: E1 port is TE-mode\n", | |
3908 | __func__); | |
3909 | r_e1_wr_sta = 0; /* F0 */ | |
3910 | hc->e1_getclock = 1; | |
3911 | } | |
3912 | if (test_bit(HFC_CHIP_RX_SYNC, &hc->chip)) | |
3913 | HFC_outb(hc, R_SYNC_OUT, V_SYNC_E1_RX); | |
3914 | else | |
3915 | HFC_outb(hc, R_SYNC_OUT, 0); | |
3916 | if (test_bit(HFC_CHIP_E1CLOCK_GET, &hc->chip)) | |
3917 | hc->e1_getclock = 1; | |
3918 | if (test_bit(HFC_CHIP_E1CLOCK_PUT, &hc->chip)) | |
3919 | hc->e1_getclock = 0; | |
3920 | if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) { | |
3921 | /* SLAVE (clock master) */ | |
3922 | if (debug & DEBUG_HFCMULTI_INIT) | |
3923 | printk(KERN_DEBUG | |
3924 | "%s: E1 port is clock master " | |
3925 | "(clock from PCM)\n", __func__); | |
3926 | HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC | V_PCM_SYNC); | |
3927 | } else { | |
3928 | if (hc->e1_getclock) { | |
3929 | /* MASTER (clock slave) */ | |
3930 | if (debug & DEBUG_HFCMULTI_INIT) | |
3931 | printk(KERN_DEBUG | |
3932 | "%s: E1 port is clock slave " | |
3933 | "(clock to PCM)\n", __func__); | |
3934 | HFC_outb(hc, R_SYNC_CTRL, V_SYNC_OFFS); | |
3935 | } else { | |
3936 | /* MASTER (clock master) */ | |
3937 | if (debug & DEBUG_HFCMULTI_INIT) | |
3938 | printk(KERN_DEBUG "%s: E1 port is " | |
3939 | "clock master " | |
3940 | "(clock from QUARTZ)\n", | |
3941 | __func__); | |
3942 | HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC | | |
3943 | V_PCM_SYNC | V_JATT_OFF); | |
3944 | HFC_outb(hc, R_SYNC_OUT, 0); | |
3945 | } | |
3946 | } | |
3947 | HFC_outb(hc, R_JATT_ATT, 0x9c); /* undoc register */ | |
3948 | HFC_outb(hc, R_PWM_MD, V_PWM0_MD); | |
3949 | HFC_outb(hc, R_PWM0, 0x50); | |
3950 | HFC_outb(hc, R_PWM1, 0xff); | |
3951 | /* state machine setup */ | |
3952 | HFC_outb(hc, R_E1_WR_STA, r_e1_wr_sta | V_E1_LD_STA); | |
3953 | udelay(6); /* wait at least 5,21us */ | |
3954 | HFC_outb(hc, R_E1_WR_STA, r_e1_wr_sta); | |
3955 | if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { | |
3956 | hc->syncronized = 0; | |
3957 | plxsd_checksync(hc, 0); | |
3958 | } | |
3959 | } else { | |
3960 | i = dch->slot; | |
3961 | hc->chan[i].slot_tx = -1; | |
3962 | hc->chan[i].slot_rx = -1; | |
3963 | hc->chan[i].conf = -1; | |
3964 | mode_hfcmulti(hc, i, dch->dev.D.protocol, -1, 0, -1, 0); | |
3965 | dch->timer.function = (void *)hfcmulti_dbusy_timer; | |
3966 | dch->timer.data = (long) dch; | |
3967 | init_timer(&dch->timer); | |
3968 | hc->chan[i - 2].slot_tx = -1; | |
3969 | hc->chan[i - 2].slot_rx = -1; | |
3970 | hc->chan[i - 2].conf = -1; | |
3971 | mode_hfcmulti(hc, i - 2, ISDN_P_NONE, -1, 0, -1, 0); | |
3972 | hc->chan[i - 1].slot_tx = -1; | |
3973 | hc->chan[i - 1].slot_rx = -1; | |
3974 | hc->chan[i - 1].conf = -1; | |
3975 | mode_hfcmulti(hc, i - 1, ISDN_P_NONE, -1, 0, -1, 0); | |
3976 | /* ST */ | |
3977 | pt = hc->chan[i].port; | |
3978 | /* select interface */ | |
3979 | HFC_outb(hc, R_ST_SEL, pt); | |
3980 | /* undocumented: delay after R_ST_SEL */ | |
3981 | udelay(1); | |
3982 | if (dch->dev.D.protocol == ISDN_P_NT_S0) { | |
3983 | if (debug & DEBUG_HFCMULTI_INIT) | |
3984 | printk(KERN_DEBUG | |
3985 | "%s: ST port %d is NT-mode\n", | |
3986 | __func__, pt); | |
3987 | /* clock delay */ | |
3988 | HFC_outb(hc, A_ST_CLK_DLY, clockdelay_nt); | |
3989 | a_st_wr_state = 1; /* G1 */ | |
3990 | hc->hw.a_st_ctrl0[pt] = V_ST_MD; | |
3991 | } else { | |
3992 | if (debug & DEBUG_HFCMULTI_INIT) | |
3993 | printk(KERN_DEBUG | |
3994 | "%s: ST port %d is TE-mode\n", | |
3995 | __func__, pt); | |
3996 | /* clock delay */ | |
3997 | HFC_outb(hc, A_ST_CLK_DLY, clockdelay_te); | |
3998 | a_st_wr_state = 2; /* F2 */ | |
3999 | hc->hw.a_st_ctrl0[pt] = 0; | |
4000 | } | |
4001 | if (!test_bit(HFC_CFG_NONCAP_TX, &hc->chan[i].cfg)) | |
4002 | hc->hw.a_st_ctrl0[pt] |= V_TX_LI; | |
db9bb63a KK |
4003 | if (hc->ctype == HFC_TYPE_XHFC) { |
4004 | hc->hw.a_st_ctrl0[pt] |= 0x40 /* V_ST_PU_CTRL */; | |
4005 | HFC_outb(hc, 0x35 /* A_ST_CTRL3 */, | |
4006 | 0x7c << 1 /* V_ST_PULSE */); | |
4007 | } | |
af69fb3a KK |
4008 | /* line setup */ |
4009 | HFC_outb(hc, A_ST_CTRL0, hc->hw.a_st_ctrl0[pt]); | |
4010 | /* disable E-channel */ | |
4011 | if ((dch->dev.D.protocol == ISDN_P_NT_S0) || | |
4012 | test_bit(HFC_CFG_DIS_ECHANNEL, &hc->chan[i].cfg)) | |
4013 | HFC_outb(hc, A_ST_CTRL1, V_E_IGNO); | |
4014 | else | |
4015 | HFC_outb(hc, A_ST_CTRL1, 0); | |
4016 | /* enable B-channel receive */ | |
4017 | HFC_outb(hc, A_ST_CTRL2, V_B1_RX_EN | V_B2_RX_EN); | |
4018 | /* state machine setup */ | |
4019 | HFC_outb(hc, A_ST_WR_STATE, a_st_wr_state | V_ST_LD_STA); | |
4020 | udelay(6); /* wait at least 5,21us */ | |
4021 | HFC_outb(hc, A_ST_WR_STATE, a_st_wr_state); | |
4022 | hc->hw.r_sci_msk |= 1 << pt; | |
4023 | /* state machine interrupts */ | |
4024 | HFC_outb(hc, R_SCI_MSK, hc->hw.r_sci_msk); | |
4025 | /* unset sync on port */ | |
4026 | if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { | |
4027 | hc->syncronized &= | |
4028 | ~(1 << hc->chan[dch->slot].port); | |
4029 | plxsd_checksync(hc, 0); | |
4030 | } | |
4031 | } | |
4032 | if (debug & DEBUG_HFCMULTI_INIT) | |
4033 | printk("%s: done\n", __func__); | |
4034 | } | |
4035 | ||
4036 | ||
4037 | static int | |
4038 | open_dchannel(struct hfc_multi *hc, struct dchannel *dch, | |
4039 | struct channel_req *rq) | |
4040 | { | |
4041 | int err = 0; | |
4042 | u_long flags; | |
4043 | ||
4044 | if (debug & DEBUG_HW_OPEN) | |
4045 | printk(KERN_DEBUG "%s: dev(%d) open from %p\n", __func__, | |
4046 | dch->dev.id, __builtin_return_address(0)); | |
4047 | if (rq->protocol == ISDN_P_NONE) | |
4048 | return -EINVAL; | |
4049 | if ((dch->dev.D.protocol != ISDN_P_NONE) && | |
4050 | (dch->dev.D.protocol != rq->protocol)) { | |
eac74af9 KK |
4051 | if (debug & DEBUG_HFCMULTI_MODE) |
4052 | printk(KERN_DEBUG "%s: change protocol %x to %x\n", | |
4053 | __func__, dch->dev.D.protocol, rq->protocol); | |
af69fb3a | 4054 | } |
eac74af9 KK |
4055 | if ((dch->dev.D.protocol == ISDN_P_TE_S0) && |
4056 | (rq->protocol != ISDN_P_TE_S0)) | |
af69fb3a KK |
4057 | l1_event(dch->l1, CLOSE_CHANNEL); |
4058 | if (dch->dev.D.protocol != rq->protocol) { | |
4059 | if (rq->protocol == ISDN_P_TE_S0) { | |
4060 | err = create_l1(dch, hfcm_l1callback); | |
4061 | if (err) | |
4062 | return err; | |
4063 | } | |
4064 | dch->dev.D.protocol = rq->protocol; | |
4065 | spin_lock_irqsave(&hc->lock, flags); | |
4066 | hfcmulti_initmode(dch); | |
4067 | spin_unlock_irqrestore(&hc->lock, flags); | |
4068 | } | |
4069 | ||
4070 | if (((rq->protocol == ISDN_P_NT_S0) && (dch->state == 3)) || | |
4071 | ((rq->protocol == ISDN_P_TE_S0) && (dch->state == 7)) || | |
4072 | ((rq->protocol == ISDN_P_NT_E1) && (dch->state == 1)) || | |
4073 | ((rq->protocol == ISDN_P_TE_E1) && (dch->state == 1))) { | |
4074 | _queue_data(&dch->dev.D, PH_ACTIVATE_IND, MISDN_ID_ANY, | |
4075 | 0, NULL, GFP_KERNEL); | |
4076 | } | |
4077 | rq->ch = &dch->dev.D; | |
4078 | if (!try_module_get(THIS_MODULE)) | |
4079 | printk(KERN_WARNING "%s:cannot get module\n", __func__); | |
4080 | return 0; | |
4081 | } | |
4082 | ||
4083 | static int | |
4084 | open_bchannel(struct hfc_multi *hc, struct dchannel *dch, | |
4085 | struct channel_req *rq) | |
4086 | { | |
4087 | struct bchannel *bch; | |
4088 | int ch; | |
4089 | ||
ff4cc1de | 4090 | if (!test_channelmap(rq->adr.channel, dch->dev.channelmap)) |
af69fb3a KK |
4091 | return -EINVAL; |
4092 | if (rq->protocol == ISDN_P_NONE) | |
4093 | return -EINVAL; | |
db9bb63a | 4094 | if (hc->ctype == HFC_TYPE_E1) |
af69fb3a KK |
4095 | ch = rq->adr.channel; |
4096 | else | |
4097 | ch = (rq->adr.channel - 1) + (dch->slot - 2); | |
4098 | bch = hc->chan[ch].bch; | |
4099 | if (!bch) { | |
4100 | printk(KERN_ERR "%s:internal error ch %d has no bch\n", | |
4101 | __func__, ch); | |
4102 | return -EINVAL; | |
4103 | } | |
4104 | if (test_and_set_bit(FLG_OPEN, &bch->Flags)) | |
4105 | return -EBUSY; /* b-channel can be only open once */ | |
8dd2f36f | 4106 | test_and_clear_bit(FLG_FILLEMPTY, &bch->Flags); |
af69fb3a KK |
4107 | bch->ch.protocol = rq->protocol; |
4108 | hc->chan[ch].rx_off = 0; | |
4109 | rq->ch = &bch->ch; | |
4110 | if (!try_module_get(THIS_MODULE)) | |
4111 | printk(KERN_WARNING "%s:cannot get module\n", __func__); | |
4112 | return 0; | |
4113 | } | |
4114 | ||
4115 | /* | |
4116 | * device control function | |
4117 | */ | |
4118 | static int | |
4119 | channel_dctrl(struct dchannel *dch, struct mISDN_ctrl_req *cq) | |
4120 | { | |
7df3bb8f | 4121 | struct hfc_multi *hc = dch->hw; |
af69fb3a | 4122 | int ret = 0; |
7df3bb8f | 4123 | int wd_mode, wd_cnt; |
af69fb3a KK |
4124 | |
4125 | switch (cq->op) { | |
4126 | case MISDN_CTRL_GETOP: | |
7df3bb8f AE |
4127 | cq->op = MISDN_CTRL_HFC_OP; |
4128 | break; | |
4129 | case MISDN_CTRL_HFC_WD_INIT: /* init the watchdog */ | |
4130 | wd_cnt = cq->p1 & 0xf; | |
4131 | wd_mode = !!(cq->p1 >> 4); | |
4132 | if (debug & DEBUG_HFCMULTI_MSG) | |
eac74af9 KK |
4133 | printk(KERN_DEBUG "%s: MISDN_CTRL_HFC_WD_INIT mode %s" |
4134 | ", counter 0x%x\n", __func__, | |
4135 | wd_mode ? "AUTO" : "MANUAL", wd_cnt); | |
7df3bb8f AE |
4136 | /* set the watchdog timer */ |
4137 | HFC_outb(hc, R_TI_WD, poll_timer | (wd_cnt << 4)); | |
4138 | hc->hw.r_bert_wd_md = (wd_mode ? V_AUTO_WD_RES : 0); | |
4139 | if (hc->ctype == HFC_TYPE_XHFC) | |
4140 | hc->hw.r_bert_wd_md |= 0x40 /* V_WD_EN */; | |
4141 | /* init the watchdog register and reset the counter */ | |
4142 | HFC_outb(hc, R_BERT_WD_MD, hc->hw.r_bert_wd_md | V_WD_RES); | |
4143 | if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { | |
4144 | /* enable the watchdog output for Speech-Design */ | |
eac74af9 KK |
4145 | HFC_outb(hc, R_GPIO_SEL, V_GPIO_SEL7); |
4146 | HFC_outb(hc, R_GPIO_EN1, V_GPIO_EN15); | |
7df3bb8f AE |
4147 | HFC_outb(hc, R_GPIO_OUT1, 0); |
4148 | HFC_outb(hc, R_GPIO_OUT1, V_GPIO_OUT15); | |
4149 | } | |
4150 | break; | |
4151 | case MISDN_CTRL_HFC_WD_RESET: /* reset the watchdog counter */ | |
4152 | if (debug & DEBUG_HFCMULTI_MSG) | |
4153 | printk(KERN_DEBUG "%s: MISDN_CTRL_HFC_WD_RESET\n", | |
4154 | __func__); | |
4155 | HFC_outb(hc, R_BERT_WD_MD, hc->hw.r_bert_wd_md | V_WD_RES); | |
af69fb3a KK |
4156 | break; |
4157 | default: | |
4158 | printk(KERN_WARNING "%s: unknown Op %x\n", | |
4159 | __func__, cq->op); | |
4160 | ret = -EINVAL; | |
4161 | break; | |
4162 | } | |
4163 | return ret; | |
4164 | } | |
4165 | ||
4166 | static int | |
4167 | hfcm_dctrl(struct mISDNchannel *ch, u_int cmd, void *arg) | |
4168 | { | |
4169 | struct mISDNdevice *dev = container_of(ch, struct mISDNdevice, D); | |
4170 | struct dchannel *dch = container_of(dev, struct dchannel, dev); | |
4171 | struct hfc_multi *hc = dch->hw; | |
4172 | struct channel_req *rq; | |
4173 | int err = 0; | |
4174 | u_long flags; | |
4175 | ||
4176 | if (dch->debug & DEBUG_HW) | |
4177 | printk(KERN_DEBUG "%s: cmd:%x %p\n", | |
4178 | __func__, cmd, arg); | |
4179 | switch (cmd) { | |
4180 | case OPEN_CHANNEL: | |
4181 | rq = arg; | |
4182 | switch (rq->protocol) { | |
4183 | case ISDN_P_TE_S0: | |
4184 | case ISDN_P_NT_S0: | |
db9bb63a | 4185 | if (hc->ctype == HFC_TYPE_E1) { |
af69fb3a KK |
4186 | err = -EINVAL; |
4187 | break; | |
4188 | } | |
4189 | err = open_dchannel(hc, dch, rq); /* locked there */ | |
4190 | break; | |
4191 | case ISDN_P_TE_E1: | |
4192 | case ISDN_P_NT_E1: | |
db9bb63a | 4193 | if (hc->ctype != HFC_TYPE_E1) { |
af69fb3a KK |
4194 | err = -EINVAL; |
4195 | break; | |
4196 | } | |
4197 | err = open_dchannel(hc, dch, rq); /* locked there */ | |
4198 | break; | |
4199 | default: | |
4200 | spin_lock_irqsave(&hc->lock, flags); | |
4201 | err = open_bchannel(hc, dch, rq); | |
4202 | spin_unlock_irqrestore(&hc->lock, flags); | |
4203 | } | |
4204 | break; | |
4205 | case CLOSE_CHANNEL: | |
4206 | if (debug & DEBUG_HW_OPEN) | |
4207 | printk(KERN_DEBUG "%s: dev(%d) close from %p\n", | |
4208 | __func__, dch->dev.id, | |
4209 | __builtin_return_address(0)); | |
4210 | module_put(THIS_MODULE); | |
4211 | break; | |
4212 | case CONTROL_CHANNEL: | |
4213 | spin_lock_irqsave(&hc->lock, flags); | |
4214 | err = channel_dctrl(dch, arg); | |
4215 | spin_unlock_irqrestore(&hc->lock, flags); | |
4216 | break; | |
4217 | default: | |
4218 | if (dch->debug & DEBUG_HW) | |
4219 | printk(KERN_DEBUG "%s: unknown command %x\n", | |
4220 | __func__, cmd); | |
4221 | err = -EINVAL; | |
4222 | } | |
4223 | return err; | |
4224 | } | |
4225 | ||
3bd69ad1 AE |
4226 | static int |
4227 | clockctl(void *priv, int enable) | |
4228 | { | |
4229 | struct hfc_multi *hc = priv; | |
4230 | ||
4231 | hc->iclock_on = enable; | |
4232 | return 0; | |
4233 | } | |
4234 | ||
af69fb3a KK |
4235 | /* |
4236 | * initialize the card | |
4237 | */ | |
4238 | ||
4239 | /* | |
4240 | * start timer irq, wait some time and check if we have interrupts. | |
4241 | * if not, reset chip and try again. | |
4242 | */ | |
4243 | static int | |
4244 | init_card(struct hfc_multi *hc) | |
4245 | { | |
4246 | int err = -EIO; | |
4247 | u_long flags; | |
c31655fc | 4248 | void __iomem *plx_acc; |
af69fb3a KK |
4249 | u_long plx_flags; |
4250 | ||
4251 | if (debug & DEBUG_HFCMULTI_INIT) | |
4252 | printk(KERN_DEBUG "%s: entered\n", __func__); | |
4253 | ||
4254 | spin_lock_irqsave(&hc->lock, flags); | |
4255 | /* set interrupts but leave global interrupt disabled */ | |
4256 | hc->hw.r_irq_ctrl = V_FIFO_IRQ; | |
4257 | disable_hwirq(hc); | |
4258 | spin_unlock_irqrestore(&hc->lock, flags); | |
4259 | ||
db9bb63a | 4260 | if (request_irq(hc->irq, hfcmulti_interrupt, IRQF_SHARED, |
af69fb3a KK |
4261 | "HFC-multi", hc)) { |
4262 | printk(KERN_WARNING "mISDN: Could not get interrupt %d.\n", | |
db9bb63a KK |
4263 | hc->irq); |
4264 | hc->irq = 0; | |
af69fb3a KK |
4265 | return -EIO; |
4266 | } | |
af69fb3a KK |
4267 | |
4268 | if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { | |
4269 | spin_lock_irqsave(&plx_lock, plx_flags); | |
c31655fc | 4270 | plx_acc = hc->plx_membase + PLX_INTCSR; |
af69fb3a KK |
4271 | writew((PLX_INTCSR_PCIINT_ENABLE | PLX_INTCSR_LINTI1_ENABLE), |
4272 | plx_acc); /* enable PCI & LINT1 irq */ | |
4273 | spin_unlock_irqrestore(&plx_lock, plx_flags); | |
4274 | } | |
4275 | ||
4276 | if (debug & DEBUG_HFCMULTI_INIT) | |
4277 | printk(KERN_DEBUG "%s: IRQ %d count %d\n", | |
4278 | __func__, hc->irq, hc->irqcnt); | |
4279 | err = init_chip(hc); | |
4280 | if (err) | |
4281 | goto error; | |
4282 | /* | |
4283 | * Finally enable IRQ output | |
4284 | * this is only allowed, if an IRQ routine is allready | |
4285 | * established for this HFC, so don't do that earlier | |
4286 | */ | |
4287 | spin_lock_irqsave(&hc->lock, flags); | |
4288 | enable_hwirq(hc); | |
4289 | spin_unlock_irqrestore(&hc->lock, flags); | |
4290 | /* printk(KERN_DEBUG "no master irq set!!!\n"); */ | |
4291 | set_current_state(TASK_UNINTERRUPTIBLE); | |
4292 | schedule_timeout((100*HZ)/1000); /* Timeout 100ms */ | |
4293 | /* turn IRQ off until chip is completely initialized */ | |
4294 | spin_lock_irqsave(&hc->lock, flags); | |
4295 | disable_hwirq(hc); | |
4296 | spin_unlock_irqrestore(&hc->lock, flags); | |
4297 | if (debug & DEBUG_HFCMULTI_INIT) | |
4298 | printk(KERN_DEBUG "%s: IRQ %d count %d\n", | |
4299 | __func__, hc->irq, hc->irqcnt); | |
4300 | if (hc->irqcnt) { | |
4301 | if (debug & DEBUG_HFCMULTI_INIT) | |
4302 | printk(KERN_DEBUG "%s: done\n", __func__); | |
4303 | ||
4304 | return 0; | |
4305 | } | |
4306 | if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) { | |
4307 | printk(KERN_INFO "ignoring missing interrupts\n"); | |
4308 | return 0; | |
4309 | } | |
4310 | ||
4311 | printk(KERN_ERR "HFC PCI: IRQ(%d) getting no interrupts during init.\n", | |
4312 | hc->irq); | |
4313 | ||
4314 | err = -EIO; | |
4315 | ||
4316 | error: | |
4317 | if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { | |
4318 | spin_lock_irqsave(&plx_lock, plx_flags); | |
c31655fc | 4319 | plx_acc = hc->plx_membase + PLX_INTCSR; |
af69fb3a KK |
4320 | writew(0x00, plx_acc); /*disable IRQs*/ |
4321 | spin_unlock_irqrestore(&plx_lock, plx_flags); | |
4322 | } | |
4323 | ||
4324 | if (debug & DEBUG_HFCMULTI_INIT) | |
eac74af9 | 4325 | printk(KERN_DEBUG "%s: free irq %d\n", __func__, hc->irq); |
af69fb3a KK |
4326 | if (hc->irq) { |
4327 | free_irq(hc->irq, hc); | |
4328 | hc->irq = 0; | |
4329 | } | |
4330 | ||
4331 | if (debug & DEBUG_HFCMULTI_INIT) | |
4332 | printk(KERN_DEBUG "%s: done (err=%d)\n", __func__, err); | |
4333 | return err; | |
4334 | } | |
4335 | ||
4336 | /* | |
4337 | * find pci device and set it up | |
4338 | */ | |
4339 | ||
4340 | static int | |
4341 | setup_pci(struct hfc_multi *hc, struct pci_dev *pdev, | |
4342 | const struct pci_device_id *ent) | |
4343 | { | |
4344 | struct hm_map *m = (struct hm_map *)ent->driver_data; | |
4345 | ||
4346 | printk(KERN_INFO | |
4347 | "HFC-multi: card manufacturer: '%s' card name: '%s' clock: %s\n", | |
4348 | m->vendor_name, m->card_name, m->clock2 ? "double" : "normal"); | |
4349 | ||
4350 | hc->pci_dev = pdev; | |
4351 | if (m->clock2) | |
4352 | test_and_set_bit(HFC_CHIP_CLOCK2, &hc->chip); | |
4353 | ||
4354 | if (ent->device == 0xB410) { | |
4355 | test_and_set_bit(HFC_CHIP_B410P, &hc->chip); | |
4356 | test_and_set_bit(HFC_CHIP_PCM_MASTER, &hc->chip); | |
4357 | test_and_clear_bit(HFC_CHIP_PCM_SLAVE, &hc->chip); | |
4358 | hc->slots = 32; | |
4359 | } | |
4360 | ||
4361 | if (hc->pci_dev->irq <= 0) { | |
4362 | printk(KERN_WARNING "HFC-multi: No IRQ for PCI card found.\n"); | |
4363 | return -EIO; | |
4364 | } | |
4365 | if (pci_enable_device(hc->pci_dev)) { | |
4366 | printk(KERN_WARNING "HFC-multi: Error enabling PCI card.\n"); | |
4367 | return -EIO; | |
4368 | } | |
4369 | hc->leds = m->leds; | |
4370 | hc->ledstate = 0xAFFEAFFE; | |
4371 | hc->opticalsupport = m->opticalsupport; | |
4372 | ||
db9bb63a KK |
4373 | hc->pci_iobase = 0; |
4374 | hc->pci_membase = NULL; | |
4375 | hc->plx_membase = NULL; | |
4376 | ||
af69fb3a KK |
4377 | /* set memory access methods */ |
4378 | if (m->io_mode) /* use mode from card config */ | |
4379 | hc->io_mode = m->io_mode; | |
4380 | switch (hc->io_mode) { | |
4381 | case HFC_IO_MODE_PLXSD: | |
4382 | test_and_set_bit(HFC_CHIP_PLXSD, &hc->chip); | |
4383 | hc->slots = 128; /* required */ | |
af69fb3a KK |
4384 | hc->HFC_outb = HFC_outb_pcimem; |
4385 | hc->HFC_inb = HFC_inb_pcimem; | |
4386 | hc->HFC_inw = HFC_inw_pcimem; | |
4387 | hc->HFC_wait = HFC_wait_pcimem; | |
4388 | hc->read_fifo = read_fifo_pcimem; | |
4389 | hc->write_fifo = write_fifo_pcimem; | |
af69fb3a KK |
4390 | hc->plx_origmembase = hc->pci_dev->resource[0].start; |
4391 | /* MEMBASE 1 is PLX PCI Bridge */ | |
4392 | ||
4393 | if (!hc->plx_origmembase) { | |
4394 | printk(KERN_WARNING | |
4395 | "HFC-multi: No IO-Memory for PCI PLX bridge found\n"); | |
4396 | pci_disable_device(hc->pci_dev); | |
4397 | return -EIO; | |
4398 | } | |
4399 | ||
4400 | hc->plx_membase = ioremap(hc->plx_origmembase, 0x80); | |
4401 | if (!hc->plx_membase) { | |
4402 | printk(KERN_WARNING | |
4403 | "HFC-multi: failed to remap plx address space. " | |
4404 | "(internal error)\n"); | |
4405 | pci_disable_device(hc->pci_dev); | |
4406 | return -EIO; | |
4407 | } | |
4408 | printk(KERN_INFO | |
4409 | "HFC-multi: plx_membase:%#lx plx_origmembase:%#lx\n", | |
4410 | (u_long)hc->plx_membase, hc->plx_origmembase); | |
4411 | ||
4412 | hc->pci_origmembase = hc->pci_dev->resource[2].start; | |
4413 | /* MEMBASE 1 is PLX PCI Bridge */ | |
4414 | if (!hc->pci_origmembase) { | |
4415 | printk(KERN_WARNING | |
4416 | "HFC-multi: No IO-Memory for PCI card found\n"); | |
4417 | pci_disable_device(hc->pci_dev); | |
4418 | return -EIO; | |
4419 | } | |
4420 | ||
4421 | hc->pci_membase = ioremap(hc->pci_origmembase, 0x400); | |
4422 | if (!hc->pci_membase) { | |
4423 | printk(KERN_WARNING "HFC-multi: failed to remap io " | |
4424 | "address space. (internal error)\n"); | |
4425 | pci_disable_device(hc->pci_dev); | |
4426 | return -EIO; | |
4427 | } | |
4428 | ||
4429 | printk(KERN_INFO | |
4430 | "card %d: defined at MEMBASE %#lx (%#lx) IRQ %d HZ %d " | |
4431 | "leds-type %d\n", | |
4432 | hc->id, (u_long)hc->pci_membase, hc->pci_origmembase, | |
4433 | hc->pci_dev->irq, HZ, hc->leds); | |
4434 | pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_MEMIO); | |
4435 | break; | |
4436 | case HFC_IO_MODE_PCIMEM: | |
db9bb63a KK |
4437 | hc->HFC_outb = HFC_outb_pcimem; |
4438 | hc->HFC_inb = HFC_inb_pcimem; | |
4439 | hc->HFC_inw = HFC_inw_pcimem; | |
4440 | hc->HFC_wait = HFC_wait_pcimem; | |
4441 | hc->read_fifo = read_fifo_pcimem; | |
4442 | hc->write_fifo = write_fifo_pcimem; | |
af69fb3a KK |
4443 | hc->pci_origmembase = hc->pci_dev->resource[1].start; |
4444 | if (!hc->pci_origmembase) { | |
4445 | printk(KERN_WARNING | |
4446 | "HFC-multi: No IO-Memory for PCI card found\n"); | |
4447 | pci_disable_device(hc->pci_dev); | |
4448 | return -EIO; | |
4449 | } | |
4450 | ||
4451 | hc->pci_membase = ioremap(hc->pci_origmembase, 256); | |
4452 | if (!hc->pci_membase) { | |
4453 | printk(KERN_WARNING | |
4454 | "HFC-multi: failed to remap io address space. " | |
4455 | "(internal error)\n"); | |
4456 | pci_disable_device(hc->pci_dev); | |
4457 | return -EIO; | |
4458 | } | |
db9bb63a KK |
4459 | printk(KERN_INFO "card %d: defined at MEMBASE %#lx (%#lx) IRQ " |
4460 | "%d HZ %d leds-type %d\n", hc->id, (u_long)hc->pci_membase, | |
af69fb3a KK |
4461 | hc->pci_origmembase, hc->pci_dev->irq, HZ, hc->leds); |
4462 | pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_MEMIO); | |
4463 | break; | |
4464 | case HFC_IO_MODE_REGIO: | |
db9bb63a KK |
4465 | hc->HFC_outb = HFC_outb_regio; |
4466 | hc->HFC_inb = HFC_inb_regio; | |
4467 | hc->HFC_inw = HFC_inw_regio; | |
4468 | hc->HFC_wait = HFC_wait_regio; | |
4469 | hc->read_fifo = read_fifo_regio; | |
4470 | hc->write_fifo = write_fifo_regio; | |
af69fb3a KK |
4471 | hc->pci_iobase = (u_int) hc->pci_dev->resource[0].start; |
4472 | if (!hc->pci_iobase) { | |
4473 | printk(KERN_WARNING | |
4474 | "HFC-multi: No IO for PCI card found\n"); | |
4475 | pci_disable_device(hc->pci_dev); | |
4476 | return -EIO; | |
4477 | } | |
4478 | ||
4479 | if (!request_region(hc->pci_iobase, 8, "hfcmulti")) { | |
4480 | printk(KERN_WARNING "HFC-multi: failed to request " | |
4481 | "address space at 0x%08lx (internal error)\n", | |
4482 | hc->pci_iobase); | |
4483 | pci_disable_device(hc->pci_dev); | |
4484 | return -EIO; | |
4485 | } | |
4486 | ||
4487 | printk(KERN_INFO | |
4488 | "%s %s: defined at IOBASE %#x IRQ %d HZ %d leds-type %d\n", | |
4489 | m->vendor_name, m->card_name, (u_int) hc->pci_iobase, | |
4490 | hc->pci_dev->irq, HZ, hc->leds); | |
4491 | pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_REGIO); | |
4492 | break; | |
4493 | default: | |
4494 | printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n"); | |
4495 | pci_disable_device(hc->pci_dev); | |
4496 | return -EIO; | |
4497 | } | |
4498 | ||
4499 | pci_set_drvdata(hc->pci_dev, hc); | |
4500 | ||
4501 | /* At this point the needed PCI config is done */ | |
4502 | /* fifos are still not enabled */ | |
4503 | return 0; | |
4504 | } | |
4505 | ||
4506 | ||
4507 | /* | |
4508 | * remove port | |
4509 | */ | |
4510 | ||
4511 | static void | |
4512 | release_port(struct hfc_multi *hc, struct dchannel *dch) | |
4513 | { | |
4514 | int pt, ci, i = 0; | |
4515 | u_long flags; | |
4516 | struct bchannel *pb; | |
4517 | ||
4518 | ci = dch->slot; | |
4519 | pt = hc->chan[ci].port; | |
4520 | ||
4521 | if (debug & DEBUG_HFCMULTI_INIT) | |
4522 | printk(KERN_DEBUG "%s: entered for port %d\n", | |
4523 | __func__, pt + 1); | |
4524 | ||
4525 | if (pt >= hc->ports) { | |
4526 | printk(KERN_WARNING "%s: ERROR port out of range (%d).\n", | |
4527 | __func__, pt + 1); | |
4528 | return; | |
4529 | } | |
4530 | ||
4531 | if (debug & DEBUG_HFCMULTI_INIT) | |
4532 | printk(KERN_DEBUG "%s: releasing port=%d\n", | |
4533 | __func__, pt + 1); | |
4534 | ||
4535 | if (dch->dev.D.protocol == ISDN_P_TE_S0) | |
4536 | l1_event(dch->l1, CLOSE_CHANNEL); | |
4537 | ||
4538 | hc->chan[ci].dch = NULL; | |
4539 | ||
4540 | if (hc->created[pt]) { | |
4541 | hc->created[pt] = 0; | |
4542 | mISDN_unregister_device(&dch->dev); | |
4543 | } | |
4544 | ||
4545 | spin_lock_irqsave(&hc->lock, flags); | |
4546 | ||
4547 | if (dch->timer.function) { | |
4548 | del_timer(&dch->timer); | |
4549 | dch->timer.function = NULL; | |
4550 | } | |
4551 | ||
db9bb63a | 4552 | if (hc->ctype == HFC_TYPE_E1) { /* E1 */ |
af69fb3a KK |
4553 | /* remove sync */ |
4554 | if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { | |
4555 | hc->syncronized = 0; | |
4556 | plxsd_checksync(hc, 1); | |
4557 | } | |
4558 | /* free channels */ | |
4559 | for (i = 0; i <= 31; i++) { | |
4560 | if (hc->chan[i].bch) { | |
4561 | if (debug & DEBUG_HFCMULTI_INIT) | |
4562 | printk(KERN_DEBUG | |
4563 | "%s: free port %d channel %d\n", | |
4564 | __func__, hc->chan[i].port+1, i); | |
4565 | pb = hc->chan[i].bch; | |
4566 | hc->chan[i].bch = NULL; | |
4567 | spin_unlock_irqrestore(&hc->lock, flags); | |
4568 | mISDN_freebchannel(pb); | |
4569 | kfree(pb); | |
4570 | kfree(hc->chan[i].coeff); | |
4571 | spin_lock_irqsave(&hc->lock, flags); | |
4572 | } | |
4573 | } | |
4574 | } else { | |
4575 | /* remove sync */ | |
4576 | if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { | |
4577 | hc->syncronized &= | |
4578 | ~(1 << hc->chan[ci].port); | |
4579 | plxsd_checksync(hc, 1); | |
4580 | } | |
4581 | /* free channels */ | |
4582 | if (hc->chan[ci - 2].bch) { | |
4583 | if (debug & DEBUG_HFCMULTI_INIT) | |
4584 | printk(KERN_DEBUG | |
4585 | "%s: free port %d channel %d\n", | |
4586 | __func__, hc->chan[ci - 2].port+1, | |
4587 | ci - 2); | |
4588 | pb = hc->chan[ci - 2].bch; | |
4589 | hc->chan[ci - 2].bch = NULL; | |
4590 | spin_unlock_irqrestore(&hc->lock, flags); | |
4591 | mISDN_freebchannel(pb); | |
4592 | kfree(pb); | |
4593 | kfree(hc->chan[ci - 2].coeff); | |
4594 | spin_lock_irqsave(&hc->lock, flags); | |
4595 | } | |
4596 | if (hc->chan[ci - 1].bch) { | |
4597 | if (debug & DEBUG_HFCMULTI_INIT) | |
4598 | printk(KERN_DEBUG | |
4599 | "%s: free port %d channel %d\n", | |
4600 | __func__, hc->chan[ci - 1].port+1, | |
4601 | ci - 1); | |
4602 | pb = hc->chan[ci - 1].bch; | |
4603 | hc->chan[ci - 1].bch = NULL; | |
4604 | spin_unlock_irqrestore(&hc->lock, flags); | |
4605 | mISDN_freebchannel(pb); | |
4606 | kfree(pb); | |
4607 | kfree(hc->chan[ci - 1].coeff); | |
4608 | spin_lock_irqsave(&hc->lock, flags); | |
4609 | } | |
4610 | } | |
4611 | ||
4612 | spin_unlock_irqrestore(&hc->lock, flags); | |
4613 | ||
4614 | if (debug & DEBUG_HFCMULTI_INIT) | |
4615 | printk(KERN_DEBUG "%s: free port %d channel D\n", __func__, pt); | |
4616 | mISDN_freedchannel(dch); | |
4617 | kfree(dch); | |
4618 | ||
4619 | if (debug & DEBUG_HFCMULTI_INIT) | |
4620 | printk(KERN_DEBUG "%s: done!\n", __func__); | |
4621 | } | |
4622 | ||
4623 | static void | |
4624 | release_card(struct hfc_multi *hc) | |
4625 | { | |
4626 | u_long flags; | |
4627 | int ch; | |
4628 | ||
4629 | if (debug & DEBUG_HFCMULTI_INIT) | |
eac74af9 | 4630 | printk(KERN_DEBUG "%s: release card (%d) entered\n", |
af69fb3a KK |
4631 | __func__, hc->id); |
4632 | ||
3bd69ad1 AE |
4633 | /* unregister clock source */ |
4634 | if (hc->iclock) | |
4635 | mISDN_unregister_clock(hc->iclock); | |
4636 | ||
4637 | /* disable irq */ | |
af69fb3a KK |
4638 | spin_lock_irqsave(&hc->lock, flags); |
4639 | disable_hwirq(hc); | |
4640 | spin_unlock_irqrestore(&hc->lock, flags); | |
af69fb3a KK |
4641 | udelay(1000); |
4642 | ||
4643 | /* dimm leds */ | |
4644 | if (hc->leds) | |
4645 | hfcmulti_leds(hc); | |
4646 | ||
4647 | /* disable D-channels & B-channels */ | |
4648 | if (debug & DEBUG_HFCMULTI_INIT) | |
4649 | printk(KERN_DEBUG "%s: disable all channels (d and b)\n", | |
4650 | __func__); | |
4651 | for (ch = 0; ch <= 31; ch++) { | |
4652 | if (hc->chan[ch].dch) | |
4653 | release_port(hc, hc->chan[ch].dch); | |
4654 | } | |
4655 | ||
4656 | /* release hardware & irq */ | |
4657 | if (hc->irq) { | |
4658 | if (debug & DEBUG_HFCMULTI_INIT) | |
eac74af9 | 4659 | printk(KERN_DEBUG "%s: free irq %d\n", |
af69fb3a KK |
4660 | __func__, hc->irq); |
4661 | free_irq(hc->irq, hc); | |
4662 | hc->irq = 0; | |
4663 | ||
4664 | } | |
4665 | release_io_hfcmulti(hc); | |
4666 | ||
4667 | if (debug & DEBUG_HFCMULTI_INIT) | |
eac74af9 | 4668 | printk(KERN_DEBUG "%s: remove instance from list\n", |
af69fb3a KK |
4669 | __func__); |
4670 | list_del(&hc->list); | |
4671 | ||
4672 | if (debug & DEBUG_HFCMULTI_INIT) | |
eac74af9 | 4673 | printk(KERN_DEBUG "%s: delete instance\n", __func__); |
af69fb3a KK |
4674 | if (hc == syncmaster) |
4675 | syncmaster = NULL; | |
4676 | kfree(hc); | |
4677 | if (debug & DEBUG_HFCMULTI_INIT) | |
eac74af9 | 4678 | printk(KERN_DEBUG "%s: card successfully removed\n", |
af69fb3a KK |
4679 | __func__); |
4680 | } | |
4681 | ||
4682 | static int | |
4683 | init_e1_port(struct hfc_multi *hc, struct hm_map *m) | |
4684 | { | |
4685 | struct dchannel *dch; | |
4686 | struct bchannel *bch; | |
4687 | int ch, ret = 0; | |
4688 | char name[MISDN_MAX_IDLEN]; | |
4689 | ||
4690 | dch = kzalloc(sizeof(struct dchannel), GFP_KERNEL); | |
4691 | if (!dch) | |
4692 | return -ENOMEM; | |
4693 | dch->debug = debug; | |
4694 | mISDN_initdchannel(dch, MAX_DFRAME_LEN_L1, ph_state_change); | |
4695 | dch->hw = hc; | |
4696 | dch->dev.Dprotocols = (1 << ISDN_P_TE_E1) | (1 << ISDN_P_NT_E1); | |
4697 | dch->dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) | | |
4698 | (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK)); | |
4699 | dch->dev.D.send = handle_dmsg; | |
4700 | dch->dev.D.ctrl = hfcm_dctrl; | |
eac74af9 | 4701 | dch->dev.nrbchan = (hc->dslot) ? 30 : 31; |
af69fb3a KK |
4702 | dch->slot = hc->dslot; |
4703 | hc->chan[hc->dslot].dch = dch; | |
4704 | hc->chan[hc->dslot].port = 0; | |
4705 | hc->chan[hc->dslot].nt_timer = -1; | |
4706 | for (ch = 1; ch <= 31; ch++) { | |
4707 | if (ch == hc->dslot) /* skip dchannel */ | |
4708 | continue; | |
4709 | bch = kzalloc(sizeof(struct bchannel), GFP_KERNEL); | |
4710 | if (!bch) { | |
4711 | printk(KERN_ERR "%s: no memory for bchannel\n", | |
4712 | __func__); | |
4713 | ret = -ENOMEM; | |
4714 | goto free_chan; | |
4715 | } | |
4716 | hc->chan[ch].coeff = kzalloc(512, GFP_KERNEL); | |
4717 | if (!hc->chan[ch].coeff) { | |
4718 | printk(KERN_ERR "%s: no memory for coeffs\n", | |
4719 | __func__); | |
4720 | ret = -ENOMEM; | |
23b904f3 | 4721 | kfree(bch); |
af69fb3a KK |
4722 | goto free_chan; |
4723 | } | |
4724 | bch->nr = ch; | |
4725 | bch->slot = ch; | |
4726 | bch->debug = debug; | |
4727 | mISDN_initbchannel(bch, MAX_DATA_MEM); | |
4728 | bch->hw = hc; | |
4729 | bch->ch.send = handle_bmsg; | |
4730 | bch->ch.ctrl = hfcm_bctrl; | |
4731 | bch->ch.nr = ch; | |
4732 | list_add(&bch->ch.list, &dch->dev.bchannels); | |
4733 | hc->chan[ch].bch = bch; | |
4734 | hc->chan[ch].port = 0; | |
ff4cc1de | 4735 | set_channelmap(bch->nr, dch->dev.channelmap); |
af69fb3a KK |
4736 | } |
4737 | /* set optical line type */ | |
4738 | if (port[Port_cnt] & 0x001) { | |
4739 | if (!m->opticalsupport) { | |
4740 | printk(KERN_INFO | |
4741 | "This board has no optical " | |
4742 | "support\n"); | |
4743 | } else { | |
4744 | if (debug & DEBUG_HFCMULTI_INIT) | |
4745 | printk(KERN_DEBUG | |
4746 | "%s: PORT set optical " | |
4747 | "interfacs: card(%d) " | |
4748 | "port(%d)\n", | |
4749 | __func__, | |
4750 | HFC_cnt + 1, 1); | |
4751 | test_and_set_bit(HFC_CFG_OPTICAL, | |
4752 | &hc->chan[hc->dslot].cfg); | |
4753 | } | |
4754 | } | |
4755 | /* set LOS report */ | |
4756 | if (port[Port_cnt] & 0x004) { | |
4757 | if (debug & DEBUG_HFCMULTI_INIT) | |
4758 | printk(KERN_DEBUG "%s: PORT set " | |
4759 | "LOS report: card(%d) port(%d)\n", | |
4760 | __func__, HFC_cnt + 1, 1); | |
4761 | test_and_set_bit(HFC_CFG_REPORT_LOS, | |
4762 | &hc->chan[hc->dslot].cfg); | |
4763 | } | |
4764 | /* set AIS report */ | |
4765 | if (port[Port_cnt] & 0x008) { | |
4766 | if (debug & DEBUG_HFCMULTI_INIT) | |
4767 | printk(KERN_DEBUG "%s: PORT set " | |
4768 | "AIS report: card(%d) port(%d)\n", | |
4769 | __func__, HFC_cnt + 1, 1); | |
4770 | test_and_set_bit(HFC_CFG_REPORT_AIS, | |
4771 | &hc->chan[hc->dslot].cfg); | |
4772 | } | |
4773 | /* set SLIP report */ | |
4774 | if (port[Port_cnt] & 0x010) { | |
4775 | if (debug & DEBUG_HFCMULTI_INIT) | |
4776 | printk(KERN_DEBUG | |
4777 | "%s: PORT set SLIP report: " | |
4778 | "card(%d) port(%d)\n", | |
4779 | __func__, HFC_cnt + 1, 1); | |
4780 | test_and_set_bit(HFC_CFG_REPORT_SLIP, | |
4781 | &hc->chan[hc->dslot].cfg); | |
4782 | } | |
4783 | /* set RDI report */ | |
4784 | if (port[Port_cnt] & 0x020) { | |
4785 | if (debug & DEBUG_HFCMULTI_INIT) | |
4786 | printk(KERN_DEBUG | |
4787 | "%s: PORT set RDI report: " | |
4788 | "card(%d) port(%d)\n", | |
4789 | __func__, HFC_cnt + 1, 1); | |
4790 | test_and_set_bit(HFC_CFG_REPORT_RDI, | |
4791 | &hc->chan[hc->dslot].cfg); | |
4792 | } | |
4793 | /* set CRC-4 Mode */ | |
4794 | if (!(port[Port_cnt] & 0x100)) { | |
4795 | if (debug & DEBUG_HFCMULTI_INIT) | |
4796 | printk(KERN_DEBUG "%s: PORT turn on CRC4 report:" | |
4797 | " card(%d) port(%d)\n", | |
4798 | __func__, HFC_cnt + 1, 1); | |
4799 | test_and_set_bit(HFC_CFG_CRC4, | |
4800 | &hc->chan[hc->dslot].cfg); | |
4801 | } else { | |
4802 | if (debug & DEBUG_HFCMULTI_INIT) | |
4803 | printk(KERN_DEBUG "%s: PORT turn off CRC4" | |
4804 | " report: card(%d) port(%d)\n", | |
4805 | __func__, HFC_cnt + 1, 1); | |
4806 | } | |
4807 | /* set forced clock */ | |
4808 | if (port[Port_cnt] & 0x0200) { | |
4809 | if (debug & DEBUG_HFCMULTI_INIT) | |
4810 | printk(KERN_DEBUG "%s: PORT force getting clock from " | |
4811 | "E1: card(%d) port(%d)\n", | |
4812 | __func__, HFC_cnt + 1, 1); | |
4813 | test_and_set_bit(HFC_CHIP_E1CLOCK_GET, &hc->chip); | |
4814 | } else | |
4815 | if (port[Port_cnt] & 0x0400) { | |
4816 | if (debug & DEBUG_HFCMULTI_INIT) | |
4817 | printk(KERN_DEBUG "%s: PORT force putting clock to " | |
4818 | "E1: card(%d) port(%d)\n", | |
4819 | __func__, HFC_cnt + 1, 1); | |
4820 | test_and_set_bit(HFC_CHIP_E1CLOCK_PUT, &hc->chip); | |
4821 | } | |
4822 | /* set JATT PLL */ | |
4823 | if (port[Port_cnt] & 0x0800) { | |
4824 | if (debug & DEBUG_HFCMULTI_INIT) | |
4825 | printk(KERN_DEBUG "%s: PORT disable JATT PLL on " | |
4826 | "E1: card(%d) port(%d)\n", | |
4827 | __func__, HFC_cnt + 1, 1); | |
4828 | test_and_set_bit(HFC_CHIP_RX_SYNC, &hc->chip); | |
4829 | } | |
4830 | /* set elastic jitter buffer */ | |
4831 | if (port[Port_cnt] & 0x3000) { | |
4832 | hc->chan[hc->dslot].jitter = (port[Port_cnt]>>12) & 0x3; | |
4833 | if (debug & DEBUG_HFCMULTI_INIT) | |
4834 | printk(KERN_DEBUG | |
4835 | "%s: PORT set elastic " | |
4836 | "buffer to %d: card(%d) port(%d)\n", | |
4837 | __func__, hc->chan[hc->dslot].jitter, | |
4838 | HFC_cnt + 1, 1); | |
4839 | } else | |
4840 | hc->chan[hc->dslot].jitter = 2; /* default */ | |
4841 | snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-e1.%d", HFC_cnt + 1); | |
b36b654a | 4842 | ret = mISDN_register_device(&dch->dev, &hc->pci_dev->dev, name); |
af69fb3a KK |
4843 | if (ret) |
4844 | goto free_chan; | |
4845 | hc->created[0] = 1; | |
4846 | return ret; | |
4847 | free_chan: | |
4848 | release_port(hc, dch); | |
4849 | return ret; | |
4850 | } | |
4851 | ||
4852 | static int | |
4853 | init_multi_port(struct hfc_multi *hc, int pt) | |
4854 | { | |
4855 | struct dchannel *dch; | |
4856 | struct bchannel *bch; | |
4857 | int ch, i, ret = 0; | |
4858 | char name[MISDN_MAX_IDLEN]; | |
4859 | ||
4860 | dch = kzalloc(sizeof(struct dchannel), GFP_KERNEL); | |
4861 | if (!dch) | |
4862 | return -ENOMEM; | |
4863 | dch->debug = debug; | |
4864 | mISDN_initdchannel(dch, MAX_DFRAME_LEN_L1, ph_state_change); | |
4865 | dch->hw = hc; | |
4866 | dch->dev.Dprotocols = (1 << ISDN_P_TE_S0) | (1 << ISDN_P_NT_S0); | |
4867 | dch->dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) | | |
4868 | (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK)); | |
4869 | dch->dev.D.send = handle_dmsg; | |
4870 | dch->dev.D.ctrl = hfcm_dctrl; | |
4871 | dch->dev.nrbchan = 2; | |
4872 | i = pt << 2; | |
4873 | dch->slot = i + 2; | |
4874 | hc->chan[i + 2].dch = dch; | |
4875 | hc->chan[i + 2].port = pt; | |
4876 | hc->chan[i + 2].nt_timer = -1; | |
4877 | for (ch = 0; ch < dch->dev.nrbchan; ch++) { | |
4878 | bch = kzalloc(sizeof(struct bchannel), GFP_KERNEL); | |
4879 | if (!bch) { | |
4880 | printk(KERN_ERR "%s: no memory for bchannel\n", | |
4881 | __func__); | |
4882 | ret = -ENOMEM; | |
4883 | goto free_chan; | |
4884 | } | |
4885 | hc->chan[i + ch].coeff = kzalloc(512, GFP_KERNEL); | |
4886 | if (!hc->chan[i + ch].coeff) { | |
4887 | printk(KERN_ERR "%s: no memory for coeffs\n", | |
4888 | __func__); | |
4889 | ret = -ENOMEM; | |
23b904f3 | 4890 | kfree(bch); |
af69fb3a KK |
4891 | goto free_chan; |
4892 | } | |
4893 | bch->nr = ch + 1; | |
4894 | bch->slot = i + ch; | |
4895 | bch->debug = debug; | |
4896 | mISDN_initbchannel(bch, MAX_DATA_MEM); | |
4897 | bch->hw = hc; | |
4898 | bch->ch.send = handle_bmsg; | |
4899 | bch->ch.ctrl = hfcm_bctrl; | |
4900 | bch->ch.nr = ch + 1; | |
4901 | list_add(&bch->ch.list, &dch->dev.bchannels); | |
4902 | hc->chan[i + ch].bch = bch; | |
4903 | hc->chan[i + ch].port = pt; | |
ff4cc1de | 4904 | set_channelmap(bch->nr, dch->dev.channelmap); |
af69fb3a KK |
4905 | } |
4906 | /* set master clock */ | |
4907 | if (port[Port_cnt] & 0x001) { | |
4908 | if (debug & DEBUG_HFCMULTI_INIT) | |
4909 | printk(KERN_DEBUG | |
4910 | "%s: PROTOCOL set master clock: " | |
4911 | "card(%d) port(%d)\n", | |
4912 | __func__, HFC_cnt + 1, pt + 1); | |
4913 | if (dch->dev.D.protocol != ISDN_P_TE_S0) { | |
4914 | printk(KERN_ERR "Error: Master clock " | |
4915 | "for port(%d) of card(%d) is only" | |
4916 | " possible with TE-mode\n", | |
4917 | pt + 1, HFC_cnt + 1); | |
4918 | ret = -EINVAL; | |
4919 | goto free_chan; | |
4920 | } | |
4921 | if (hc->masterclk >= 0) { | |
4922 | printk(KERN_ERR "Error: Master clock " | |
4923 | "for port(%d) of card(%d) already " | |
4924 | "defined for port(%d)\n", | |
4925 | pt + 1, HFC_cnt + 1, hc->masterclk+1); | |
4926 | ret = -EINVAL; | |
4927 | goto free_chan; | |
4928 | } | |
4929 | hc->masterclk = pt; | |
4930 | } | |
4931 | /* set transmitter line to non capacitive */ | |
4932 | if (port[Port_cnt] & 0x002) { | |
4933 | if (debug & DEBUG_HFCMULTI_INIT) | |
4934 | printk(KERN_DEBUG | |
4935 | "%s: PROTOCOL set non capacitive " | |
4936 | "transmitter: card(%d) port(%d)\n", | |
4937 | __func__, HFC_cnt + 1, pt + 1); | |
4938 | test_and_set_bit(HFC_CFG_NONCAP_TX, | |
4939 | &hc->chan[i + 2].cfg); | |
4940 | } | |
4941 | /* disable E-channel */ | |
4942 | if (port[Port_cnt] & 0x004) { | |
eac74af9 | 4943 | if (debug & DEBUG_HFCMULTI_INIT) |
af69fb3a KK |
4944 | printk(KERN_DEBUG |
4945 | "%s: PROTOCOL disable E-channel: " | |
4946 | "card(%d) port(%d)\n", | |
4947 | __func__, HFC_cnt + 1, pt + 1); | |
4948 | test_and_set_bit(HFC_CFG_DIS_ECHANNEL, | |
4949 | &hc->chan[i + 2].cfg); | |
4950 | } | |
db9bb63a KK |
4951 | if (hc->ctype == HFC_TYPE_XHFC) { |
4952 | snprintf(name, MISDN_MAX_IDLEN - 1, "xhfc.%d-%d", | |
4953 | HFC_cnt + 1, pt + 1); | |
4954 | ret = mISDN_register_device(&dch->dev, NULL, name); | |
4955 | } else { | |
4956 | snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-%ds.%d-%d", | |
4957 | hc->ctype, HFC_cnt + 1, pt + 1); | |
4958 | ret = mISDN_register_device(&dch->dev, &hc->pci_dev->dev, name); | |
4959 | } | |
af69fb3a KK |
4960 | if (ret) |
4961 | goto free_chan; | |
4962 | hc->created[pt] = 1; | |
4963 | return ret; | |
4964 | free_chan: | |
4965 | release_port(hc, dch); | |
4966 | return ret; | |
4967 | } | |
4968 | ||
4969 | static int | |
db9bb63a KK |
4970 | hfcmulti_init(struct hm_map *m, struct pci_dev *pdev, |
4971 | const struct pci_device_id *ent) | |
af69fb3a | 4972 | { |
af69fb3a KK |
4973 | int ret_err = 0; |
4974 | int pt; | |
4975 | struct hfc_multi *hc; | |
4976 | u_long flags; | |
4977 | u_char dips = 0, pmj = 0; /* dip settings, port mode Jumpers */ | |
8dd2f36f | 4978 | int i; |
af69fb3a KK |
4979 | |
4980 | if (HFC_cnt >= MAX_CARDS) { | |
4981 | printk(KERN_ERR "too many cards (max=%d).\n", | |
4982 | MAX_CARDS); | |
4983 | return -EINVAL; | |
4984 | } | |
4985 | if ((type[HFC_cnt] & 0xff) && (type[HFC_cnt] & 0xff) != m->type) { | |
4986 | printk(KERN_WARNING "HFC-MULTI: Card '%s:%s' type %d found but " | |
4987 | "type[%d] %d was supplied as module parameter\n", | |
4988 | m->vendor_name, m->card_name, m->type, HFC_cnt, | |
4989 | type[HFC_cnt] & 0xff); | |
4990 | printk(KERN_WARNING "HFC-MULTI: Load module without parameters " | |
4991 | "first, to see cards and their types."); | |
4992 | return -EINVAL; | |
4993 | } | |
4994 | if (debug & DEBUG_HFCMULTI_INIT) | |
4995 | printk(KERN_DEBUG "%s: Registering %s:%s chip type %d (0x%x)\n", | |
4996 | __func__, m->vendor_name, m->card_name, m->type, | |
4997 | type[HFC_cnt]); | |
4998 | ||
4999 | /* allocate card+fifo structure */ | |
5000 | hc = kzalloc(sizeof(struct hfc_multi), GFP_KERNEL); | |
5001 | if (!hc) { | |
5002 | printk(KERN_ERR "No kmem for HFC-Multi card\n"); | |
5003 | return -ENOMEM; | |
5004 | } | |
5005 | spin_lock_init(&hc->lock); | |
5006 | hc->mtyp = m; | |
db9bb63a | 5007 | hc->ctype = m->type; |
af69fb3a KK |
5008 | hc->ports = m->ports; |
5009 | hc->id = HFC_cnt; | |
5010 | hc->pcm = pcm[HFC_cnt]; | |
5011 | hc->io_mode = iomode[HFC_cnt]; | |
db9bb63a | 5012 | if (dslot[HFC_cnt] < 0 && hc->ctype == HFC_TYPE_E1) { |
af69fb3a KK |
5013 | hc->dslot = 0; |
5014 | printk(KERN_INFO "HFC-E1 card has disabled D-channel, but " | |
5015 | "31 B-channels\n"); | |
db9bb63a KK |
5016 | } |
5017 | if (dslot[HFC_cnt] > 0 && dslot[HFC_cnt] < 32 | |
5018 | && hc->ctype == HFC_TYPE_E1) { | |
af69fb3a KK |
5019 | hc->dslot = dslot[HFC_cnt]; |
5020 | printk(KERN_INFO "HFC-E1 card has alternating D-channel on " | |
5021 | "time slot %d\n", dslot[HFC_cnt]); | |
5022 | } else | |
5023 | hc->dslot = 16; | |
5024 | ||
5025 | /* set chip specific features */ | |
5026 | hc->masterclk = -1; | |
5027 | if (type[HFC_cnt] & 0x100) { | |
5028 | test_and_set_bit(HFC_CHIP_ULAW, &hc->chip); | |
8dd2f36f | 5029 | hc->silence = 0xff; /* ulaw silence */ |
af69fb3a | 5030 | } else |
8dd2f36f AE |
5031 | hc->silence = 0x2a; /* alaw silence */ |
5032 | if ((poll >> 1) > sizeof(hc->silence_data)) { | |
5033 | printk(KERN_ERR "HFCMULTI error: silence_data too small, " | |
5034 | "please fix\n"); | |
5035 | return -EINVAL; | |
5036 | } | |
5037 | for (i = 0; i < (poll >> 1); i++) | |
5038 | hc->silence_data[i] = hc->silence; | |
5039 | ||
db9bb63a KK |
5040 | if (hc->ctype != HFC_TYPE_XHFC) { |
5041 | if (!(type[HFC_cnt] & 0x200)) | |
5042 | test_and_set_bit(HFC_CHIP_DTMF, &hc->chip); | |
5043 | test_and_set_bit(HFC_CHIP_CONF, &hc->chip); | |
5044 | } | |
af69fb3a KK |
5045 | |
5046 | if (type[HFC_cnt] & 0x800) | |
5047 | test_and_set_bit(HFC_CHIP_PCM_SLAVE, &hc->chip); | |
5048 | if (type[HFC_cnt] & 0x1000) { | |
5049 | test_and_set_bit(HFC_CHIP_PCM_MASTER, &hc->chip); | |
5050 | test_and_clear_bit(HFC_CHIP_PCM_SLAVE, &hc->chip); | |
5051 | } | |
5052 | if (type[HFC_cnt] & 0x4000) | |
5053 | test_and_set_bit(HFC_CHIP_EXRAM_128, &hc->chip); | |
5054 | if (type[HFC_cnt] & 0x8000) | |
5055 | test_and_set_bit(HFC_CHIP_EXRAM_512, &hc->chip); | |
5056 | hc->slots = 32; | |
5057 | if (type[HFC_cnt] & 0x10000) | |
5058 | hc->slots = 64; | |
5059 | if (type[HFC_cnt] & 0x20000) | |
5060 | hc->slots = 128; | |
5061 | if (type[HFC_cnt] & 0x80000) { | |
5062 | test_and_set_bit(HFC_CHIP_WATCHDOG, &hc->chip); | |
5063 | hc->wdcount = 0; | |
5064 | hc->wdbyte = V_GPIO_OUT2; | |
5065 | printk(KERN_NOTICE "Watchdog enabled\n"); | |
5066 | } | |
5067 | ||
db9bb63a KK |
5068 | if (pdev && ent) |
5069 | /* setup pci, hc->slots may change due to PLXSD */ | |
5070 | ret_err = setup_pci(hc, pdev, ent); | |
5071 | else | |
5072 | #ifdef CONFIG_MISDN_HFCMULTI_8xx | |
5073 | ret_err = setup_embedded(hc, m); | |
5074 | #else | |
5075 | { | |
5076 | printk(KERN_WARNING "Embedded IO Mode not selected\n"); | |
5077 | ret_err = -EIO; | |
5078 | } | |
5079 | #endif | |
af69fb3a KK |
5080 | if (ret_err) { |
5081 | if (hc == syncmaster) | |
5082 | syncmaster = NULL; | |
5083 | kfree(hc); | |
5084 | return ret_err; | |
5085 | } | |
5086 | ||
db9bb63a KK |
5087 | hc->HFC_outb_nodebug = hc->HFC_outb; |
5088 | hc->HFC_inb_nodebug = hc->HFC_inb; | |
5089 | hc->HFC_inw_nodebug = hc->HFC_inw; | |
5090 | hc->HFC_wait_nodebug = hc->HFC_wait; | |
5091 | #ifdef HFC_REGISTER_DEBUG | |
5092 | hc->HFC_outb = HFC_outb_debug; | |
5093 | hc->HFC_inb = HFC_inb_debug; | |
5094 | hc->HFC_inw = HFC_inw_debug; | |
5095 | hc->HFC_wait = HFC_wait_debug; | |
5096 | #endif | |
5097 | /* create channels */ | |
af69fb3a KK |
5098 | for (pt = 0; pt < hc->ports; pt++) { |
5099 | if (Port_cnt >= MAX_PORTS) { | |
5100 | printk(KERN_ERR "too many ports (max=%d).\n", | |
5101 | MAX_PORTS); | |
5102 | ret_err = -EINVAL; | |
5103 | goto free_card; | |
5104 | } | |
db9bb63a | 5105 | if (hc->ctype == HFC_TYPE_E1) |
af69fb3a KK |
5106 | ret_err = init_e1_port(hc, m); |
5107 | else | |
5108 | ret_err = init_multi_port(hc, pt); | |
5109 | if (debug & DEBUG_HFCMULTI_INIT) | |
5110 | printk(KERN_DEBUG | |
5111 | "%s: Registering D-channel, card(%d) port(%d)" | |
5112 | "result %d\n", | |
5113 | __func__, HFC_cnt + 1, pt, ret_err); | |
5114 | ||
5115 | if (ret_err) { | |
5116 | while (pt) { /* release already registered ports */ | |
5117 | pt--; | |
5118 | release_port(hc, hc->chan[(pt << 2) + 2].dch); | |
5119 | } | |
5120 | goto free_card; | |
5121 | } | |
5122 | Port_cnt++; | |
5123 | } | |
5124 | ||
5125 | /* disp switches */ | |
5126 | switch (m->dip_type) { | |
5127 | case DIP_4S: | |
5128 | /* | |
69e656cc | 5129 | * Get DIP setting for beroNet 1S/2S/4S cards |
af69fb3a KK |
5130 | * DIP Setting: (collect GPIO 13/14/15 (R_GPIO_IN1) + |
5131 | * GPI 19/23 (R_GPI_IN2)) | |
5132 | */ | |
5133 | dips = ((~HFC_inb(hc, R_GPIO_IN1) & 0xE0) >> 5) | | |
5134 | ((~HFC_inb(hc, R_GPI_IN2) & 0x80) >> 3) | | |
5135 | (~HFC_inb(hc, R_GPI_IN2) & 0x08); | |
5136 | ||
5137 | /* Port mode (TE/NT) jumpers */ | |
5138 | pmj = ((HFC_inb(hc, R_GPI_IN3) >> 4) & 0xf); | |
5139 | ||
5140 | if (test_bit(HFC_CHIP_B410P, &hc->chip)) | |
5141 | pmj = ~pmj & 0xf; | |
5142 | ||
5143 | printk(KERN_INFO "%s: %s DIPs(0x%x) jumpers(0x%x)\n", | |
5144 | m->vendor_name, m->card_name, dips, pmj); | |
5145 | break; | |
5146 | case DIP_8S: | |
5147 | /* | |
69e656cc KK |
5148 | * Get DIP Setting for beroNet 8S0+ cards |
5149 | * Enable PCI auxbridge function | |
af69fb3a KK |
5150 | */ |
5151 | HFC_outb(hc, R_BRG_PCM_CFG, 1 | V_PCM_CLK); | |
5152 | /* prepare access to auxport */ | |
5153 | outw(0x4000, hc->pci_iobase + 4); | |
5154 | /* | |
5155 | * some dummy reads are required to | |
5156 | * read valid DIP switch data | |
5157 | */ | |
5158 | dips = inb(hc->pci_iobase); | |
5159 | dips = inb(hc->pci_iobase); | |
5160 | dips = inb(hc->pci_iobase); | |
5161 | dips = ~inb(hc->pci_iobase) & 0x3F; | |
5162 | outw(0x0, hc->pci_iobase + 4); | |
5163 | /* disable PCI auxbridge function */ | |
5164 | HFC_outb(hc, R_BRG_PCM_CFG, V_PCM_CLK); | |
5165 | printk(KERN_INFO "%s: %s DIPs(0x%x)\n", | |
5166 | m->vendor_name, m->card_name, dips); | |
5167 | break; | |
5168 | case DIP_E1: | |
5169 | /* | |
5170 | * get DIP Setting for beroNet E1 cards | |
5171 | * DIP Setting: collect GPI 4/5/6/7 (R_GPI_IN0) | |
5172 | */ | |
5173 | dips = (~HFC_inb(hc, R_GPI_IN0) & 0xF0)>>4; | |
5174 | printk(KERN_INFO "%s: %s DIPs(0x%x)\n", | |
5175 | m->vendor_name, m->card_name, dips); | |
5176 | break; | |
5177 | } | |
5178 | ||
5179 | /* add to list */ | |
5180 | spin_lock_irqsave(&HFClock, flags); | |
5181 | list_add_tail(&hc->list, &HFClist); | |
5182 | spin_unlock_irqrestore(&HFClock, flags); | |
5183 | ||
3bd69ad1 AE |
5184 | /* use as clock source */ |
5185 | if (clock == HFC_cnt + 1) | |
5186 | hc->iclock = mISDN_register_clock("HFCMulti", 0, clockctl, hc); | |
5187 | ||
af69fb3a | 5188 | /* initialize hardware */ |
db9bb63a | 5189 | hc->irq = (m->irq) ? : hc->pci_dev->irq; |
af69fb3a KK |
5190 | ret_err = init_card(hc); |
5191 | if (ret_err) { | |
5192 | printk(KERN_ERR "init card returns %d\n", ret_err); | |
5193 | release_card(hc); | |
5194 | return ret_err; | |
5195 | } | |
5196 | ||
5197 | /* start IRQ and return */ | |
5198 | spin_lock_irqsave(&hc->lock, flags); | |
5199 | enable_hwirq(hc); | |
5200 | spin_unlock_irqrestore(&hc->lock, flags); | |
5201 | return 0; | |
5202 | ||
5203 | free_card: | |
5204 | release_io_hfcmulti(hc); | |
5205 | if (hc == syncmaster) | |
5206 | syncmaster = NULL; | |
5207 | kfree(hc); | |
5208 | return ret_err; | |
5209 | } | |
5210 | ||
5211 | static void __devexit hfc_remove_pci(struct pci_dev *pdev) | |
5212 | { | |
5213 | struct hfc_multi *card = pci_get_drvdata(pdev); | |
5214 | u_long flags; | |
5215 | ||
5216 | if (debug) | |
5217 | printk(KERN_INFO "removing hfc_multi card vendor:%x " | |
5218 | "device:%x subvendor:%x subdevice:%x\n", | |
5219 | pdev->vendor, pdev->device, | |
5220 | pdev->subsystem_vendor, pdev->subsystem_device); | |
5221 | ||
5222 | if (card) { | |
5223 | spin_lock_irqsave(&HFClock, flags); | |
5224 | release_card(card); | |
5225 | spin_unlock_irqrestore(&HFClock, flags); | |
5226 | } else { | |
5227 | if (debug) | |
eac74af9 | 5228 | printk(KERN_DEBUG "%s: drvdata allready removed\n", |
af69fb3a KK |
5229 | __func__); |
5230 | } | |
5231 | } | |
5232 | ||
5233 | #define VENDOR_CCD "Cologne Chip AG" | |
5234 | #define VENDOR_BN "beroNet GmbH" | |
5235 | #define VENDOR_DIG "Digium Inc." | |
5236 | #define VENDOR_JH "Junghanns.NET GmbH" | |
5237 | #define VENDOR_PRIM "PrimuX" | |
5238 | ||
5239 | static const struct hm_map hfcm_map[] = { | |
db9bb63a KK |
5240 | /*0*/ {VENDOR_BN, "HFC-1S Card (mini PCI)", 4, 1, 1, 3, 0, DIP_4S, 0, 0}, |
5241 | /*1*/ {VENDOR_BN, "HFC-2S Card", 4, 2, 1, 3, 0, DIP_4S, 0, 0}, | |
5242 | /*2*/ {VENDOR_BN, "HFC-2S Card (mini PCI)", 4, 2, 1, 3, 0, DIP_4S, 0, 0}, | |
5243 | /*3*/ {VENDOR_BN, "HFC-4S Card", 4, 4, 1, 2, 0, DIP_4S, 0, 0}, | |
5244 | /*4*/ {VENDOR_BN, "HFC-4S Card (mini PCI)", 4, 4, 1, 2, 0, 0, 0, 0}, | |
5245 | /*5*/ {VENDOR_CCD, "HFC-4S Eval (old)", 4, 4, 0, 0, 0, 0, 0, 0}, | |
5246 | /*6*/ {VENDOR_CCD, "HFC-4S IOB4ST", 4, 4, 1, 2, 0, DIP_4S, 0, 0}, | |
5247 | /*7*/ {VENDOR_CCD, "HFC-4S", 4, 4, 1, 2, 0, 0, 0, 0}, | |
5248 | /*8*/ {VENDOR_DIG, "HFC-4S Card", 4, 4, 0, 2, 0, 0, HFC_IO_MODE_REGIO, 0}, | |
5249 | /*9*/ {VENDOR_CCD, "HFC-4S Swyx 4xS0 SX2 QuadBri", 4, 4, 1, 2, 0, 0, 0, 0}, | |
5250 | /*10*/ {VENDOR_JH, "HFC-4S (junghanns 2.0)", 4, 4, 1, 2, 0, 0, 0, 0}, | |
5251 | /*11*/ {VENDOR_PRIM, "HFC-2S Primux Card", 4, 2, 0, 0, 0, 0, 0, 0}, | |
5252 | ||
5253 | /*12*/ {VENDOR_BN, "HFC-8S Card", 8, 8, 1, 0, 0, 0, 0, 0}, | |
af69fb3a | 5254 | /*13*/ {VENDOR_BN, "HFC-8S Card (+)", 8, 8, 1, 8, 0, DIP_8S, |
db9bb63a KK |
5255 | HFC_IO_MODE_REGIO, 0}, |
5256 | /*14*/ {VENDOR_CCD, "HFC-8S Eval (old)", 8, 8, 0, 0, 0, 0, 0, 0}, | |
5257 | /*15*/ {VENDOR_CCD, "HFC-8S IOB4ST Recording", 8, 8, 1, 0, 0, 0, 0, 0}, | |
af69fb3a | 5258 | |
db9bb63a KK |
5259 | /*16*/ {VENDOR_CCD, "HFC-8S IOB8ST", 8, 8, 1, 0, 0, 0, 0, 0}, |
5260 | /*17*/ {VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0, 0}, | |
5261 | /*18*/ {VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0, 0}, | |
af69fb3a | 5262 | |
db9bb63a KK |
5263 | /*19*/ {VENDOR_BN, "HFC-E1 Card", 1, 1, 0, 1, 0, DIP_E1, 0, 0}, |
5264 | /*20*/ {VENDOR_BN, "HFC-E1 Card (mini PCI)", 1, 1, 0, 1, 0, 0, 0, 0}, | |
5265 | /*21*/ {VENDOR_BN, "HFC-E1+ Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0, 0}, | |
5266 | /*22*/ {VENDOR_BN, "HFC-E1 Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0, 0}, | |
af69fb3a | 5267 | |
db9bb63a KK |
5268 | /*23*/ {VENDOR_CCD, "HFC-E1 Eval (old)", 1, 1, 0, 0, 0, 0, 0, 0}, |
5269 | /*24*/ {VENDOR_CCD, "HFC-E1 IOB1E1", 1, 1, 0, 1, 0, 0, 0, 0}, | |
5270 | /*25*/ {VENDOR_CCD, "HFC-E1", 1, 1, 0, 1, 0, 0, 0, 0}, | |
af69fb3a KK |
5271 | |
5272 | /*26*/ {VENDOR_CCD, "HFC-4S Speech Design", 4, 4, 0, 0, 0, 0, | |
db9bb63a | 5273 | HFC_IO_MODE_PLXSD, 0}, |
af69fb3a | 5274 | /*27*/ {VENDOR_CCD, "HFC-E1 Speech Design", 1, 1, 0, 0, 0, 0, |
db9bb63a KK |
5275 | HFC_IO_MODE_PLXSD, 0}, |
5276 | /*28*/ {VENDOR_CCD, "HFC-4S OpenVox", 4, 4, 1, 0, 0, 0, 0, 0}, | |
5277 | /*29*/ {VENDOR_CCD, "HFC-2S OpenVox", 4, 2, 1, 0, 0, 0, 0, 0}, | |
5278 | /*30*/ {VENDOR_CCD, "HFC-8S OpenVox", 8, 8, 1, 0, 0, 0, 0, 0}, | |
5279 | /*31*/ {VENDOR_CCD, "XHFC-4S Speech Design", 5, 4, 0, 0, 0, 0, | |
5280 | HFC_IO_MODE_EMBSD, XHFC_IRQ}, | |
7245a2fe | 5281 | /*32*/ {VENDOR_JH, "HFC-8S (junghanns)", 8, 8, 1, 0, 0, 0, 0, 0}, |
af69fb3a KK |
5282 | }; |
5283 | ||
5284 | #undef H | |
5285 | #define H(x) ((unsigned long)&hfcm_map[x]) | |
5286 | static struct pci_device_id hfmultipci_ids[] __devinitdata = { | |
5287 | ||
5288 | /* Cards with HFC-4S Chip */ | |
5289 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD, | |
5290 | PCI_SUBDEVICE_ID_CCD_BN1SM, 0, 0, H(0)}, /* BN1S mini PCI */ | |
5291 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD, | |
5292 | PCI_SUBDEVICE_ID_CCD_BN2S, 0, 0, H(1)}, /* BN2S */ | |
5293 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD, | |
5294 | PCI_SUBDEVICE_ID_CCD_BN2SM, 0, 0, H(2)}, /* BN2S mini PCI */ | |
5295 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD, | |
5296 | PCI_SUBDEVICE_ID_CCD_BN4S, 0, 0, H(3)}, /* BN4S */ | |
5297 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD, | |
5298 | PCI_SUBDEVICE_ID_CCD_BN4SM, 0, 0, H(4)}, /* BN4S mini PCI */ | |
5299 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD, | |
5300 | PCI_DEVICE_ID_CCD_HFC4S, 0, 0, H(5)}, /* Old Eval */ | |
5301 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD, | |
5302 | PCI_SUBDEVICE_ID_CCD_IOB4ST, 0, 0, H(6)}, /* IOB4ST */ | |
5303 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD, | |
5304 | PCI_SUBDEVICE_ID_CCD_HFC4S, 0, 0, H(7)}, /* 4S */ | |
5305 | { PCI_VENDOR_ID_DIGIUM, PCI_DEVICE_ID_DIGIUM_HFC4S, | |
5306 | PCI_VENDOR_ID_DIGIUM, PCI_DEVICE_ID_DIGIUM_HFC4S, 0, 0, H(8)}, | |
5307 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD, | |
5308 | PCI_SUBDEVICE_ID_CCD_SWYX4S, 0, 0, H(9)}, /* 4S Swyx */ | |
5309 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD, | |
5310 | PCI_SUBDEVICE_ID_CCD_JH4S20, 0, 0, H(10)}, | |
5311 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD, | |
5312 | PCI_SUBDEVICE_ID_CCD_PMX2S, 0, 0, H(11)}, /* Primux */ | |
5313 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD, | |
5314 | PCI_SUBDEVICE_ID_CCD_OV4S, 0, 0, H(28)}, /* OpenVox 4 */ | |
5315 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD, | |
5316 | PCI_SUBDEVICE_ID_CCD_OV2S, 0, 0, H(29)}, /* OpenVox 2 */ | |
5317 | ||
5318 | /* Cards with HFC-8S Chip */ | |
5319 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD, | |
5320 | PCI_SUBDEVICE_ID_CCD_BN8S, 0, 0, H(12)}, /* BN8S */ | |
5321 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD, | |
5322 | PCI_SUBDEVICE_ID_CCD_BN8SP, 0, 0, H(13)}, /* BN8S+ */ | |
5323 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD, | |
5324 | PCI_DEVICE_ID_CCD_HFC8S, 0, 0, H(14)}, /* old Eval */ | |
5325 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD, | |
69e656cc | 5326 | PCI_SUBDEVICE_ID_CCD_IOB8STR, 0, 0, H(15)}, /* IOB8ST Recording */ |
af69fb3a KK |
5327 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD, |
5328 | PCI_SUBDEVICE_ID_CCD_IOB8ST, 0, 0, H(16)}, /* IOB8ST */ | |
5329 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD, | |
5330 | PCI_SUBDEVICE_ID_CCD_IOB8ST_1, 0, 0, H(17)}, /* IOB8ST */ | |
5331 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD, | |
5332 | PCI_SUBDEVICE_ID_CCD_HFC8S, 0, 0, H(18)}, /* 8S */ | |
5333 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD, | |
5334 | PCI_SUBDEVICE_ID_CCD_OV8S, 0, 0, H(30)}, /* OpenVox 8 */ | |
7245a2fe AE |
5335 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD, |
5336 | PCI_SUBDEVICE_ID_CCD_JH8S, 0, 0, H(32)}, /* Junganns 8S */ | |
af69fb3a KK |
5337 | |
5338 | ||
5339 | /* Cards with HFC-E1 Chip */ | |
5340 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD, | |
5341 | PCI_SUBDEVICE_ID_CCD_BNE1, 0, 0, H(19)}, /* BNE1 */ | |
5342 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD, | |
5343 | PCI_SUBDEVICE_ID_CCD_BNE1M, 0, 0, H(20)}, /* BNE1 mini PCI */ | |
5344 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD, | |
5345 | PCI_SUBDEVICE_ID_CCD_BNE1DP, 0, 0, H(21)}, /* BNE1 + (Dual) */ | |
5346 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD, | |
5347 | PCI_SUBDEVICE_ID_CCD_BNE1D, 0, 0, H(22)}, /* BNE1 (Dual) */ | |
5348 | ||
5349 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD, | |
5350 | PCI_DEVICE_ID_CCD_HFCE1, 0, 0, H(23)}, /* Old Eval */ | |
5351 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD, | |
5352 | PCI_SUBDEVICE_ID_CCD_IOB1E1, 0, 0, H(24)}, /* IOB1E1 */ | |
5353 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD, | |
5354 | PCI_SUBDEVICE_ID_CCD_HFCE1, 0, 0, H(25)}, /* E1 */ | |
5355 | ||
5356 | { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_CCD, | |
5357 | PCI_SUBDEVICE_ID_CCD_SPD4S, 0, 0, H(26)}, /* PLX PCI Bridge */ | |
5358 | { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_CCD, | |
5359 | PCI_SUBDEVICE_ID_CCD_SPDE1, 0, 0, H(27)}, /* PLX PCI Bridge */ | |
daebafed AE |
5360 | |
5361 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD, | |
5362 | PCI_SUBDEVICE_ID_CCD_JHSE1, 0, 0, H(25)}, /* Junghanns E1 */ | |
5363 | ||
af69fb3a KK |
5364 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_ANY_ID, PCI_ANY_ID, |
5365 | 0, 0, 0}, | |
5366 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_ANY_ID, PCI_ANY_ID, | |
5367 | 0, 0, 0}, | |
5368 | { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_ANY_ID, PCI_ANY_ID, | |
5369 | 0, 0, 0}, | |
5370 | {0, } | |
5371 | }; | |
5372 | #undef H | |
5373 | ||
5374 | MODULE_DEVICE_TABLE(pci, hfmultipci_ids); | |
5375 | ||
5376 | static int | |
5377 | hfcmulti_probe(struct pci_dev *pdev, const struct pci_device_id *ent) | |
5378 | { | |
5379 | struct hm_map *m = (struct hm_map *)ent->driver_data; | |
5380 | int ret; | |
5381 | ||
69e656cc KK |
5382 | if (m == NULL && ent->vendor == PCI_VENDOR_ID_CCD && ( |
5383 | ent->device == PCI_DEVICE_ID_CCD_HFC4S || | |
5384 | ent->device == PCI_DEVICE_ID_CCD_HFC8S || | |
5385 | ent->device == PCI_DEVICE_ID_CCD_HFCE1)) { | |
5386 | printk(KERN_ERR | |
5387 | "Unknown HFC multiport controller (vendor:%x device:%x " | |
5388 | "subvendor:%x subdevice:%x)\n", ent->vendor, ent->device, | |
5389 | ent->subvendor, ent->subdevice); | |
5390 | printk(KERN_ERR | |
5391 | "Please contact the driver maintainer for support.\n"); | |
af69fb3a KK |
5392 | return -ENODEV; |
5393 | } | |
db9bb63a | 5394 | ret = hfcmulti_init(m, pdev, ent); |
af69fb3a KK |
5395 | if (ret) |
5396 | return ret; | |
5397 | HFC_cnt++; | |
5398 | printk(KERN_INFO "%d devices registered\n", HFC_cnt); | |
5399 | return 0; | |
5400 | } | |
5401 | ||
5402 | static struct pci_driver hfcmultipci_driver = { | |
5403 | .name = "hfc_multi", | |
5404 | .probe = hfcmulti_probe, | |
5405 | .remove = __devexit_p(hfc_remove_pci), | |
5406 | .id_table = hfmultipci_ids, | |
5407 | }; | |
5408 | ||
5409 | static void __exit | |
5410 | HFCmulti_cleanup(void) | |
5411 | { | |
5412 | struct hfc_multi *card, *next; | |
5413 | ||
69e656cc | 5414 | /* get rid of all devices of this driver */ |
af69fb3a KK |
5415 | list_for_each_entry_safe(card, next, &HFClist, list) |
5416 | release_card(card); | |
af69fb3a KK |
5417 | pci_unregister_driver(&hfcmultipci_driver); |
5418 | } | |
5419 | ||
5420 | static int __init | |
5421 | HFCmulti_init(void) | |
5422 | { | |
5423 | int err; | |
db9bb63a KK |
5424 | int i, xhfc = 0; |
5425 | struct hm_map m; | |
af69fb3a | 5426 | |
69e656cc KK |
5427 | printk(KERN_INFO "mISDN: HFC-multi driver %s\n", HFC_MULTI_VERSION); |
5428 | ||
af69fb3a | 5429 | #ifdef IRQ_DEBUG |
69e656cc | 5430 | printk(KERN_DEBUG "%s: IRQ_DEBUG IS ENABLED!\n", __func__); |
af69fb3a KK |
5431 | #endif |
5432 | ||
5433 | spin_lock_init(&HFClock); | |
5434 | spin_lock_init(&plx_lock); | |
5435 | ||
5436 | if (debug & DEBUG_HFCMULTI_INIT) | |
5437 | printk(KERN_DEBUG "%s: init entered\n", __func__); | |
5438 | ||
af69fb3a KK |
5439 | switch (poll) { |
5440 | case 0: | |
5441 | poll_timer = 6; | |
5442 | poll = 128; | |
5443 | break; | |
af69fb3a KK |
5444 | case 8: |
5445 | poll_timer = 2; | |
5446 | break; | |
5447 | case 16: | |
5448 | poll_timer = 3; | |
5449 | break; | |
5450 | case 32: | |
5451 | poll_timer = 4; | |
5452 | break; | |
5453 | case 64: | |
5454 | poll_timer = 5; | |
5455 | break; | |
5456 | case 128: | |
5457 | poll_timer = 6; | |
5458 | break; | |
5459 | case 256: | |
5460 | poll_timer = 7; | |
5461 | break; | |
5462 | default: | |
5463 | printk(KERN_ERR | |
5464 | "%s: Wrong poll value (%d).\n", __func__, poll); | |
5465 | err = -EINVAL; | |
5466 | return err; | |
5467 | ||
5468 | } | |
5469 | ||
3bd69ad1 AE |
5470 | if (!clock) |
5471 | clock = 1; | |
5472 | ||
db9bb63a KK |
5473 | /* Register the embedded devices. |
5474 | * This should be done before the PCI cards registration */ | |
5475 | switch (hwid) { | |
5476 | case HWID_MINIP4: | |
5477 | xhfc = 1; | |
5478 | m = hfcm_map[31]; | |
5479 | break; | |
5480 | case HWID_MINIP8: | |
5481 | xhfc = 2; | |
5482 | m = hfcm_map[31]; | |
5483 | break; | |
5484 | case HWID_MINIP16: | |
5485 | xhfc = 4; | |
5486 | m = hfcm_map[31]; | |
5487 | break; | |
5488 | default: | |
5489 | xhfc = 0; | |
5490 | } | |
5491 | ||
5492 | for (i = 0; i < xhfc; ++i) { | |
5493 | err = hfcmulti_init(&m, NULL, NULL); | |
5494 | if (err) { | |
5495 | printk(KERN_ERR "error registering embedded driver: " | |
5496 | "%x\n", err); | |
5497 | return -err; | |
5498 | } | |
5499 | HFC_cnt++; | |
5500 | printk(KERN_INFO "%d devices registered\n", HFC_cnt); | |
5501 | } | |
5502 | ||
5503 | /* Register the PCI cards */ | |
af69fb3a KK |
5504 | err = pci_register_driver(&hfcmultipci_driver); |
5505 | if (err < 0) { | |
5506 | printk(KERN_ERR "error registering pci driver: %x\n", err); | |
af69fb3a KK |
5507 | return err; |
5508 | } | |
db9bb63a | 5509 | |
af69fb3a KK |
5510 | return 0; |
5511 | } | |
5512 | ||
5513 | ||
5514 | module_init(HFCmulti_init); | |
5515 | module_exit(HFCmulti_cleanup); |