]>
Commit | Line | Data |
---|---|---|
be5ce2f1 UKK |
1 | config LEDS_GPIO_REGISTER |
2 | bool | |
3 | help | |
4 | This option provides the function gpio_led_register_device. | |
5 | As this function is used by arch code it must not be compiled as a | |
6 | module. | |
7 | ||
66242f7e | 8 | menuconfig NEW_LEDS |
c72a1d60 RP |
9 | bool "LED Support" |
10 | help | |
a8d2e7d9 RP |
11 | Say Y to enable Linux LED support. This allows control of supported |
12 | LEDs from both userspace and optionally, by kernel events (triggers). | |
13 | ||
14 | This is not related to standard keyboard LEDs which are controlled | |
15 | via the input system. | |
c72a1d60 | 16 | |
45d16f09 EM |
17 | if NEW_LEDS |
18 | ||
c72a1d60 | 19 | config LEDS_CLASS |
a403d930 | 20 | tristate "LED Class Support" |
c72a1d60 RP |
21 | help |
22 | This option enables the led sysfs class in /sys/class/leds. You'll | |
23 | need this to do anything useful with LEDs. If unsure, say N. | |
24 | ||
24f51e81 | 25 | comment "LED drivers" |
c3bc9956 | 26 | |
0a2f915b HZ |
27 | config LEDS_88PM860X |
28 | tristate "LED Support for Marvell 88PM860x PMIC" | |
0bae35e1 | 29 | depends on LEDS_CLASS |
37814fdc | 30 | depends on MFD_88PM860X |
0a2f915b HZ |
31 | help |
32 | This option enables support for on-chip LED drivers found on Marvell | |
33 | Semiconductor 88PM8606 PMIC. | |
34 | ||
de5c9ede DB |
35 | config LEDS_ATMEL_PWM |
36 | tristate "LED Support using Atmel PWM outputs" | |
0bae35e1 | 37 | depends on LEDS_CLASS |
d09e1666 | 38 | depends on ATMEL_PWM |
de5c9ede DB |
39 | help |
40 | This option enables support for LEDs driven using outputs | |
41 | of the dedicated PWM controller found on newer Atmel SOCs. | |
42 | ||
b1e6b706 SKS |
43 | config LEDS_LM3530 |
44 | tristate "LCD Backlight driver for LM3530" | |
45 | depends on LEDS_CLASS | |
46 | depends on I2C | |
47 | help | |
48 | This option enables support for the LCD backlight using | |
49 | LM3530 ambient light sensor chip. This ALS chip can be | |
50 | controlled manually or using PWM input or using ambient | |
51 | light automatically. | |
52 | ||
4d3cb354 RP |
53 | config LEDS_LOCOMO |
54 | tristate "LED Support for Locomo device" | |
0bae35e1 | 55 | depends on LEDS_CLASS |
d09e1666 | 56 | depends on SHARP_LOCOMO |
4d3cb354 RP |
57 | help |
58 | This option enables support for the LEDs on Sharp Locomo. | |
59 | Zaurus models SL-5500 and SL-5600. | |
60 | ||
ac67e23b PS |
61 | config LEDS_MIKROTIK_RB532 |
62 | tristate "LED Support for Mikrotik Routerboard 532" | |
0bae35e1 | 63 | depends on LEDS_CLASS |
d09e1666 | 64 | depends on MIKROTIK_RB532 |
ac67e23b PS |
65 | help |
66 | This option enables support for the so called "User LED" of | |
67 | Mikrotik's Routerboard 532. | |
68 | ||
54bdc470 BD |
69 | config LEDS_S3C24XX |
70 | tristate "LED Support for Samsung S3C24XX GPIO LEDs" | |
0bae35e1 | 71 | depends on LEDS_CLASS |
b130d5c2 | 72 | depends on ARCH_S3C24XX |
54bdc470 BD |
73 | help |
74 | This option enables support for LEDs connected to GPIO lines | |
75 | on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440. | |
76 | ||
1a87d942 CB |
77 | config LEDS_NET48XX |
78 | tristate "LED Support for Soekris net48xx series Error LED" | |
0bae35e1 | 79 | depends on LEDS_CLASS |
d09e1666 | 80 | depends on SCx200_GPIO |
1a87d942 CB |
81 | help |
82 | This option enables support for the Soekris net4801 and net4826 error | |
83 | LED. | |
84 | ||
3b2e46f8 RW |
85 | config LEDS_FSG |
86 | tristate "LED Support for the Freecom FSG-3" | |
0bae35e1 | 87 | depends on LEDS_CLASS |
d09e1666 | 88 | depends on MACH_FSG |
3b2e46f8 RW |
89 | help |
90 | This option enables support for the LEDs on the Freecom FSG-3. | |
91 | ||
0d75565f KK |
92 | config LEDS_WRAP |
93 | tristate "LED Support for the WRAP series LEDs" | |
0bae35e1 | 94 | depends on LEDS_CLASS |
d09e1666 | 95 | depends on SCx200_GPIO |
0d75565f KK |
96 | help |
97 | This option enables support for the PCEngines WRAP programmable LEDs. | |
98 | ||
f3b6b6cd YY |
99 | config LEDS_COBALT_QUBE |
100 | tristate "LED Support for the Cobalt Qube series front LED" | |
0bae35e1 | 101 | depends on LEDS_CLASS |
d09e1666 | 102 | depends on MIPS_COBALT |
2fea6f35 | 103 | help |
f3b6b6cd | 104 | This option enables support for the front LED on Cobalt Qube series |
2fea6f35 | 105 | |
97da7aaf YY |
106 | config LEDS_COBALT_RAQ |
107 | bool "LED Support for the Cobalt Raq series" | |
ec149619 | 108 | depends on LEDS_CLASS=y && MIPS_COBALT |
97da7aaf YY |
109 | select LEDS_TRIGGERS |
110 | help | |
111 | This option enables support for the Cobalt Raq series LEDs. | |
112 | ||
5843492c DM |
113 | config LEDS_SUNFIRE |
114 | tristate "LED support for SunFire servers." | |
0bae35e1 | 115 | depends on LEDS_CLASS |
d09e1666 | 116 | depends on SPARC64 |
5843492c DM |
117 | select LEDS_TRIGGERS |
118 | help | |
119 | This option enables support for the Left, Middle, and Right | |
120 | LEDs on the I/O and CPU boards of SunFire UltraSPARC servers. | |
121 | ||
d39a7a63 KE |
122 | config LEDS_HP6XX |
123 | tristate "LED Support for the HP Jornada 6xx" | |
0bae35e1 | 124 | depends on LEDS_CLASS |
d09e1666 | 125 | depends on SH_HP6XX |
d39a7a63 | 126 | help |
692105b8 | 127 | This option enables LED support for the handheld |
d39a7a63 KE |
128 | HP Jornada 620/660/680/690. |
129 | ||
e14fa824 RV |
130 | config LEDS_PCA9532 |
131 | tristate "LED driver for PCA9532 dimmer" | |
0bae35e1 | 132 | depends on LEDS_CLASS |
d09e1666 | 133 | depends on I2C && INPUT && EXPERIMENTAL |
e14fa824 RV |
134 | help |
135 | This option enables support for NXP pca9532 | |
692105b8 | 136 | LED controller. It is generally only useful |
e14fa824 RV |
137 | as a platform driver |
138 | ||
3c1ab50d JE |
139 | config LEDS_PCA9532_GPIO |
140 | bool "Enable GPIO support for PCA9532" | |
141 | depends on LEDS_PCA9532 | |
142 | depends on GPIOLIB | |
143 | help | |
144 | Allow unused pins on PCA9532 to be used as gpio. | |
145 | ||
146 | To use a pin as gpio pca9532_type in pca9532_platform data needs to | |
147 | set to PCA9532_TYPE_GPIO. | |
148 | ||
22e03f3b RA |
149 | config LEDS_GPIO |
150 | tristate "LED Support for GPIO connected LEDs" | |
0bae35e1 | 151 | depends on LEDS_CLASS |
d09e1666 | 152 | depends on GENERIC_GPIO |
22e03f3b RA |
153 | help |
154 | This option enables support for the LEDs connected to GPIO | |
155 | outputs. To be useful the particular board must have LEDs | |
a7d878af TP |
156 | and they must be connected to the GPIO lines. The LEDs must be |
157 | defined as platform devices and/or OpenFirmware platform devices. | |
158 | The code to use these bindings can be selected below. | |
159 | ||
5054d39e AO |
160 | config LEDS_LP3944 |
161 | tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip" | |
0bae35e1 | 162 | depends on LEDS_CLASS |
d09e1666 | 163 | depends on I2C |
5054d39e | 164 | help |
7f1be819 AO |
165 | This option enables support for LEDs connected to the National |
166 | Semiconductor LP3944 Lighting Management Unit (LMU) also known as | |
167 | Fun Light Chip. | |
5054d39e AO |
168 | |
169 | To compile this driver as a module, choose M here: the | |
170 | module will be called leds-lp3944. | |
171 | ||
f4920f67 SO |
172 | config LEDS_LP5521 |
173 | tristate "LED Support for N.S. LP5521 LED driver chip" | |
174 | depends on LEDS_CLASS && I2C | |
175 | help | |
176 | If you say yes here you get support for the National Semiconductor | |
177 | LP5521 LED driver. It is 3 channel chip with programmable engines. | |
178 | Driver provides direct control via LED class and interface for | |
179 | programming the engines. | |
180 | ||
181 | config LEDS_LP5523 | |
182 | tristate "LED Support for N.S. LP5523 LED driver chip" | |
183 | depends on LEDS_CLASS && I2C | |
184 | help | |
185 | If you say yes here you get support for the National Semiconductor | |
186 | LP5523 LED driver. It is 9 channel chip with programmable engines. | |
187 | Driver provides direct control via LED class and interface for | |
188 | programming the engines. | |
189 | ||
cec035de | 190 | config LEDS_CLEVO_MAIL |
95dc5768 | 191 | tristate "Mail LED on Clevo notebook" |
0bae35e1 | 192 | depends on LEDS_CLASS |
d09e1666 | 193 | depends on X86 && SERIO_I8042 && DMI |
cec035de MN |
194 | help |
195 | This driver makes the mail LED accessible from userspace | |
196 | programs through the leds subsystem. This LED have three | |
197 | known mode: off, blink at 0.5Hz and blink at 1Hz. | |
198 | ||
92e015cb MN |
199 | The driver supports two kinds of interface: using ledtrig-timer |
200 | or through /sys/class/leds/clevo::mail/brightness. As this LED | |
201 | cannot change it's brightness it blinks instead. The brightness | |
202 | value 0 means off, 1..127 means blink at 0.5Hz and 128..255 means | |
203 | blink at 1Hz. | |
cec035de MN |
204 | |
205 | This module can drive the mail LED for the following notebooks: | |
206 | ||
b3ba31f8 | 207 | Clevo D400P |
cec035de MN |
208 | Clevo D410J |
209 | Clevo D410V | |
210 | Clevo D400V/D470V (not tested, but might work) | |
211 | Clevo M540N | |
212 | Clevo M5x0N (not tested, but might work) | |
213 | Positivo Mobile (Clevo M5x0V) | |
214 | ||
b3ba31f8 | 215 | If your model is not listed here you can try the "nodetect" |
692105b8 | 216 | module parameter. |
b3ba31f8 | 217 | |
cec035de MN |
218 | To compile this driver as a module, choose M here: the |
219 | module will be called leds-clevo-mail. | |
220 | ||
f46e9203 NC |
221 | config LEDS_PCA955X |
222 | tristate "LED Support for PCA955x I2C chips" | |
0bae35e1 | 223 | depends on LEDS_CLASS |
d09e1666 | 224 | depends on I2C |
f46e9203 NC |
225 | help |
226 | This option enables support for LEDs connected to PCA955x | |
227 | LED driver chips accessed via the I2C bus. Supported | |
228 | devices include PCA9550, PCA9551, PCA9552, and PCA9553. | |
229 | ||
75cb2e1d PM |
230 | config LEDS_PCA9633 |
231 | tristate "LED support for PCA9633 I2C chip" | |
232 | depends on LEDS_CLASS | |
233 | depends on I2C | |
234 | help | |
235 | This option enables support for LEDs connected to the PCA9633 | |
236 | LED driver chip accessed via the I2C bus. | |
237 | ||
c746b551 MB |
238 | config LEDS_WM831X_STATUS |
239 | tristate "LED support for status LEDs on WM831x PMICs" | |
0bae35e1 | 240 | depends on LEDS_CLASS |
d09e1666 | 241 | depends on MFD_WM831X |
c746b551 MB |
242 | help |
243 | This option enables support for the status LEDs of the WM831x | |
244 | series of PMICs. | |
245 | ||
0081e802 MB |
246 | config LEDS_WM8350 |
247 | tristate "LED Support for WM8350 AudioPlus PMIC" | |
0bae35e1 | 248 | depends on LEDS_CLASS |
d09e1666 | 249 | depends on MFD_WM8350 |
0081e802 MB |
250 | help |
251 | This option enables support for LEDs driven by the Wolfson | |
252 | Microelectronics WM8350 AudioPlus PMIC. | |
253 | ||
9e84561c MR |
254 | config LEDS_DA903X |
255 | tristate "LED Support for DA9030/DA9034 PMIC" | |
0bae35e1 | 256 | depends on LEDS_CLASS |
d09e1666 | 257 | depends on PMIC_DA903X |
9e84561c MR |
258 | help |
259 | This option enables support for on-chip LED drivers found | |
260 | on Dialog Semiconductor DA9030/DA9034 PMICs. | |
261 | ||
5ba73631 DDC |
262 | config LEDS_DA9052 |
263 | tristate "Dialog DA9052/DA9053 LEDS" | |
264 | depends on LEDS_CLASS | |
265 | depends on PMIC_DA9052 | |
266 | help | |
267 | This option enables support for on-chip LED drivers found | |
268 | on Dialog Semiconductor DA9052-BC and DA9053-AA/Bx PMICs. | |
269 | ||
ac2dd0f1 GL |
270 | config LEDS_DAC124S085 |
271 | tristate "LED Support for DAC124S085 SPI DAC" | |
0bae35e1 | 272 | depends on LEDS_CLASS |
d09e1666 | 273 | depends on SPI |
ac2dd0f1 GL |
274 | help |
275 | This option enables support for DAC124S085 SPI DAC from NatSemi, | |
276 | which can be used to control up to four LEDs. | |
277 | ||
41c42ff5 LF |
278 | config LEDS_PWM |
279 | tristate "PWM driven LED Support" | |
0bae35e1 | 280 | depends on LEDS_CLASS |
d09e1666 | 281 | depends on HAVE_PWM |
41c42ff5 LF |
282 | help |
283 | This option enables support for pwm driven LEDs | |
284 | ||
d4cc6a2e AO |
285 | config LEDS_REGULATOR |
286 | tristate "REGULATOR driven LED support" | |
0bae35e1 | 287 | depends on LEDS_CLASS |
d09e1666 | 288 | depends on REGULATOR |
d4cc6a2e AO |
289 | help |
290 | This option enables support for regulator driven LEDs. | |
291 | ||
0b56129b KK |
292 | config LEDS_BD2802 |
293 | tristate "LED driver for BD2802 RGB LED" | |
0bae35e1 | 294 | depends on LEDS_CLASS |
d09e1666 | 295 | depends on I2C |
0b56129b KK |
296 | help |
297 | This option enables support for BD2802GU RGB LED driver chips | |
298 | accessed via the I2C bus. | |
299 | ||
a328e95b DH |
300 | config LEDS_INTEL_SS4200 |
301 | tristate "LED driver for Intel NAS SS4200 series" | |
0bae35e1 | 302 | depends on LEDS_CLASS |
d09e1666 | 303 | depends on PCI && DMI |
a328e95b DH |
304 | help |
305 | This option enables support for the Intel SS4200 series of | |
306 | Network Attached Storage servers. You may control the hard | |
307 | drive or power LEDs on the front panel. Using this driver | |
308 | can stop the front LED from blinking after startup. | |
309 | ||
a8dd18fe DM |
310 | config LEDS_LT3593 |
311 | tristate "LED driver for LT3593 controllers" | |
0bae35e1 | 312 | depends on LEDS_CLASS |
d09e1666 | 313 | depends on GENERIC_GPIO |
a8dd18fe DM |
314 | help |
315 | This option enables support for LEDs driven by a Linear Technology | |
316 | LT3593 controller. This controller uses a special one-wire pulse | |
317 | coding protocol to set the brightness. | |
318 | ||
ed4a10b4 MH |
319 | config LEDS_ADP5520 |
320 | tristate "LED Support for ADP5520/ADP5501 PMIC" | |
0bae35e1 | 321 | depends on LEDS_CLASS |
d09e1666 | 322 | depends on PMIC_ADP5520 |
ed4a10b4 MH |
323 | help |
324 | This option enables support for on-chip LED drivers found | |
325 | on Analog Devices ADP5520/ADP5501 PMICs. | |
326 | ||
327 | To compile this driver as a module, choose M here: the module will | |
328 | be called leds-adp5520. | |
329 | ||
72dcd8d0 BR |
330 | config LEDS_DELL_NETBOOKS |
331 | tristate "External LED on Dell Business Netbooks" | |
0bae35e1 | 332 | depends on LEDS_CLASS |
72dcd8d0 BR |
333 | depends on X86 && ACPI_WMI |
334 | help | |
335 | This adds support for the Latitude 2100 and similar | |
336 | notebooks that have an external LED. | |
337 | ||
7fdcef8a PR |
338 | config LEDS_MC13783 |
339 | tristate "LED Support for MC13783 PMIC" | |
0bae35e1 | 340 | depends on LEDS_CLASS |
7fdcef8a PR |
341 | depends on MFD_MC13783 |
342 | help | |
343 | This option enable support for on-chip LED drivers found | |
344 | on Freescale Semiconductor MC13783 PMIC. | |
345 | ||
11efe71f SG |
346 | config LEDS_NS2 |
347 | tristate "LED support for Network Space v2 GPIO LEDs" | |
0bae35e1 | 348 | depends on LEDS_CLASS |
b12e2c12 PB |
349 | depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || \ |
350 | MACH_NETSPACE_MAX_V2 || MACH_D2NET_V2 | |
11efe71f SG |
351 | default y |
352 | help | |
353 | This option enable support for the dual-GPIO LED found on the | |
354 | Network Space v2 board (and parents). This include Internet Space v2, | |
355 | Network Space (Max) v2 and d2 Network v2 boards. | |
356 | ||
24467832 SG |
357 | config LEDS_NETXBIG |
358 | tristate "LED support for Big Network series LEDs" | |
359 | depends on MACH_NET2BIG_V2 || MACH_NET5BIG_V2 | |
2504f6da | 360 | depends on LEDS_CLASS |
24467832 SG |
361 | default y |
362 | help | |
363 | This option enable support for LEDs found on the LaCie 2Big | |
364 | and 5Big Network v2 boards. The LEDs are wired to a CPLD and are | |
365 | controlled through a GPIO extension bus. | |
366 | ||
7d9e7e9f PP |
367 | config LEDS_ASIC3 |
368 | bool "LED support for the HTC ASIC3" | |
9d8f776b | 369 | depends on LEDS_CLASS |
7d9e7e9f PP |
370 | depends on MFD_ASIC3 |
371 | default y | |
372 | help | |
373 | This option enables support for the LEDs on the HTC ASIC3. The HTC | |
374 | ASIC3 LED GPIOs are inputs, not outputs, thus the leds-gpio driver | |
375 | cannot be used. This driver supports hardware blinking with an on+off | |
376 | period from 62ms to 125s. Say Y to enable LEDs on the HP iPAQ hx4700. | |
377 | ||
f59b6f9f MD |
378 | config LEDS_RENESAS_TPU |
379 | bool "LED support for Renesas TPU" | |
380 | depends on LEDS_CLASS && HAVE_CLK && GENERIC_GPIO | |
381 | help | |
382 | This option enables build of the LED TPU platform driver, | |
383 | suitable to drive any TPU channel on newer Renesas SoCs. | |
384 | The driver controls the GPIO pin connected to the LED via | |
385 | the GPIO framework and expects the LED to be connected to | |
386 | a pin that can be driven in both GPIO mode and using TPU | |
387 | pin function. The latter to support brightness control. | |
388 | Brightness control is supported but hardware blinking is not. | |
389 | ||
a6d511e5 N |
390 | config LEDS_TCA6507 |
391 | tristate "LED Support for TCA6507 I2C chip" | |
392 | depends on LEDS_CLASS && I2C | |
393 | help | |
394 | This option enables support for LEDs connected to TC6507 | |
395 | LED driver chips accessed via the I2C bus. | |
396 | Driver support brightness control and hardware-assisted blinking. | |
397 | ||
8584cb82 DK |
398 | config LEDS_MAX8997 |
399 | tristate "LED support for MAX8997 PMIC" | |
400 | depends on LEDS_CLASS && MFD_MAX8997 | |
401 | help | |
402 | This option enables support for on-chip LED drivers on | |
403 | MAXIM MAX8997 PMIC. | |
404 | ||
e9a4593c SAS |
405 | config LEDS_OT200 |
406 | tristate "LED support for the Bachmann OT200" | |
407 | depends on LEDS_CLASS && HAS_IOMEM | |
408 | help | |
409 | This option enables support for the LEDs on the Bachmann OT200. | |
410 | Say Y to enable LEDs on the Bachmann OT200. | |
411 | ||
24f51e81 BD |
412 | config LEDS_TRIGGERS |
413 | bool "LED Trigger support" | |
0bae35e1 | 414 | depends on LEDS_CLASS |
24f51e81 BD |
415 | help |
416 | This option enables trigger support for the leds class. | |
417 | These triggers allow kernel events to drive the LEDs and can | |
418 | be configured via sysfs. If unsure, say Y. | |
419 | ||
d09e1666 HS |
420 | comment "LED Triggers" |
421 | ||
6655c6fe RP |
422 | config LEDS_TRIGGER_TIMER |
423 | tristate "LED Timer Trigger" | |
0bae35e1 | 424 | depends on LEDS_TRIGGERS |
6655c6fe RP |
425 | help |
426 | This allows LEDs to be controlled by a programmable timer | |
4c79141d MN |
427 | via sysfs. Some LED hardware can be programmed to start |
428 | blinking the LED without any further software interaction. | |
395cf969 | 429 | For more details read Documentation/leds/leds-class.txt. |
4c79141d MN |
430 | |
431 | If unsure, say Y. | |
6655c6fe | 432 | |
2bfb646c | 433 | config LEDS_TRIGGER_IDE_DISK |
baa351ea | 434 | bool "LED IDE Disk Trigger" |
d09e1666 | 435 | depends on IDE_GD_ATA |
0bae35e1 | 436 | depends on LEDS_TRIGGERS |
2bfb646c RP |
437 | help |
438 | This allows LEDs to be controlled by IDE disk activity. | |
439 | If unsure, say Y. | |
440 | ||
891c668b AN |
441 | config LEDS_TRIGGER_HEARTBEAT |
442 | tristate "LED Heartbeat Trigger" | |
0bae35e1 | 443 | depends on LEDS_TRIGGERS |
891c668b AN |
444 | help |
445 | This allows LEDs to be controlled by a CPU load average. | |
446 | The flash frequency is a hyperbolic function of the 1-minute | |
447 | load average. | |
448 | If unsure, say Y. | |
449 | ||
132e9306 RG |
450 | config LEDS_TRIGGER_BACKLIGHT |
451 | tristate "LED backlight Trigger" | |
0bae35e1 | 452 | depends on LEDS_TRIGGERS |
132e9306 RG |
453 | help |
454 | This allows LEDs to be controlled as a backlight device: they | |
455 | turn off and on when the display is blanked and unblanked. | |
456 | ||
457 | If unsure, say N. | |
458 | ||
17354bfe FB |
459 | config LEDS_TRIGGER_GPIO |
460 | tristate "LED GPIO Trigger" | |
0bae35e1 | 461 | depends on LEDS_TRIGGERS |
17354bfe FB |
462 | depends on GPIOLIB |
463 | help | |
464 | This allows LEDs to be controlled by gpio events. It's good | |
465 | when using gpios as switches and triggering the needed LEDs | |
466 | from there. One use case is n810's keypad LEDs that could | |
467 | be triggered by this trigger when user slides up to show | |
468 | keypad. | |
469 | ||
470 | If unsure, say N. | |
471 | ||
060856c7 NF |
472 | config LEDS_TRIGGER_DEFAULT_ON |
473 | tristate "LED Default ON Trigger" | |
0bae35e1 | 474 | depends on LEDS_TRIGGERS |
060856c7 NF |
475 | help |
476 | This allows LEDs to be initialised in the ON state. | |
477 | If unsure, say Y. | |
478 | ||
268cb38e AN |
479 | comment "iptables trigger is under Netfilter config (LED target)" |
480 | depends on LEDS_TRIGGERS | |
481 | ||
44e1e9f8 SK |
482 | config LEDS_TRIGGER_TRANSIENT |
483 | tristate "LED Transient Trigger" | |
484 | depends on LEDS_TRIGGERS | |
485 | help | |
486 | This allows one time activation of a transient state on | |
487 | GPIO/PWM based hadrware. | |
488 | If unsure, say Y. | |
489 | ||
66242f7e | 490 | endif # NEW_LEDS |