]>
Commit | Line | Data |
---|---|---|
1a59d1b8 | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
24467832 SG |
2 | /* |
3 | * leds-netxbig.c - Driver for the 2Big and 5Big Network series LEDs | |
4 | * | |
5 | * Copyright (C) 2010 LaCie | |
6 | * | |
7 | * Author: Simon Guinot <sguinot@lacie.com> | |
24467832 SG |
8 | */ |
9 | ||
10 | #include <linux/module.h> | |
24467832 SG |
11 | #include <linux/irq.h> |
12 | #include <linux/slab.h> | |
13 | #include <linux/spinlock.h> | |
14 | #include <linux/platform_device.h> | |
15 | #include <linux/gpio.h> | |
2976b179 | 16 | #include <linux/of_gpio.h> |
24467832 | 17 | #include <linux/leds.h> |
156189a6 MY |
18 | |
19 | struct netxbig_gpio_ext { | |
20 | unsigned int *addr; | |
21 | int num_addr; | |
22 | unsigned int *data; | |
23 | int num_data; | |
24 | unsigned int enable; | |
25 | }; | |
26 | ||
27 | enum netxbig_led_mode { | |
28 | NETXBIG_LED_OFF, | |
29 | NETXBIG_LED_ON, | |
30 | NETXBIG_LED_SATA, | |
31 | NETXBIG_LED_TIMER1, | |
32 | NETXBIG_LED_TIMER2, | |
33 | NETXBIG_LED_MODE_NUM, | |
34 | }; | |
35 | ||
36 | #define NETXBIG_LED_INVALID_MODE NETXBIG_LED_MODE_NUM | |
37 | ||
38 | struct netxbig_led_timer { | |
39 | unsigned long delay_on; | |
40 | unsigned long delay_off; | |
41 | enum netxbig_led_mode mode; | |
42 | }; | |
43 | ||
44 | struct netxbig_led { | |
45 | const char *name; | |
46 | const char *default_trigger; | |
47 | int mode_addr; | |
48 | int *mode_val; | |
49 | int bright_addr; | |
50 | int bright_max; | |
51 | }; | |
52 | ||
53 | struct netxbig_led_platform_data { | |
54 | struct netxbig_gpio_ext *gpio_ext; | |
55 | struct netxbig_led_timer *timer; | |
56 | int num_timer; | |
57 | struct netxbig_led *leds; | |
58 | int num_leds; | |
59 | }; | |
24467832 SG |
60 | |
61 | /* | |
62 | * GPIO extension bus. | |
63 | */ | |
64 | ||
65 | static DEFINE_SPINLOCK(gpio_ext_lock); | |
66 | ||
67 | static void gpio_ext_set_addr(struct netxbig_gpio_ext *gpio_ext, int addr) | |
68 | { | |
69 | int pin; | |
70 | ||
71 | for (pin = 0; pin < gpio_ext->num_addr; pin++) | |
72 | gpio_set_value(gpio_ext->addr[pin], (addr >> pin) & 1); | |
73 | } | |
74 | ||
75 | static void gpio_ext_set_data(struct netxbig_gpio_ext *gpio_ext, int data) | |
76 | { | |
77 | int pin; | |
78 | ||
79 | for (pin = 0; pin < gpio_ext->num_data; pin++) | |
80 | gpio_set_value(gpio_ext->data[pin], (data >> pin) & 1); | |
81 | } | |
82 | ||
83 | static void gpio_ext_enable_select(struct netxbig_gpio_ext *gpio_ext) | |
84 | { | |
85 | /* Enable select is done on the raising edge. */ | |
86 | gpio_set_value(gpio_ext->enable, 0); | |
87 | gpio_set_value(gpio_ext->enable, 1); | |
88 | } | |
89 | ||
90 | static void gpio_ext_set_value(struct netxbig_gpio_ext *gpio_ext, | |
91 | int addr, int value) | |
92 | { | |
93 | unsigned long flags; | |
94 | ||
95 | spin_lock_irqsave(&gpio_ext_lock, flags); | |
96 | gpio_ext_set_addr(gpio_ext, addr); | |
97 | gpio_ext_set_data(gpio_ext, value); | |
98 | gpio_ext_enable_select(gpio_ext); | |
99 | spin_unlock_irqrestore(&gpio_ext_lock, flags); | |
100 | } | |
101 | ||
cd010955 SG |
102 | static int gpio_ext_init(struct platform_device *pdev, |
103 | struct netxbig_gpio_ext *gpio_ext) | |
24467832 SG |
104 | { |
105 | int err; | |
106 | int i; | |
107 | ||
108 | if (unlikely(!gpio_ext)) | |
109 | return -EINVAL; | |
110 | ||
111 | /* Configure address GPIOs. */ | |
112 | for (i = 0; i < gpio_ext->num_addr; i++) { | |
cd010955 SG |
113 | err = devm_gpio_request_one(&pdev->dev, gpio_ext->addr[i], |
114 | GPIOF_OUT_INIT_LOW, | |
115 | "GPIO extension addr"); | |
24467832 | 116 | if (err) |
cd010955 | 117 | return err; |
24467832 SG |
118 | } |
119 | /* Configure data GPIOs. */ | |
120 | for (i = 0; i < gpio_ext->num_data; i++) { | |
cd010955 SG |
121 | err = devm_gpio_request_one(&pdev->dev, gpio_ext->data[i], |
122 | GPIOF_OUT_INIT_LOW, | |
123 | "GPIO extension data"); | |
24467832 | 124 | if (err) |
cd010955 | 125 | return err; |
24467832 SG |
126 | } |
127 | /* Configure "enable select" GPIO. */ | |
cd010955 SG |
128 | err = devm_gpio_request_one(&pdev->dev, gpio_ext->enable, |
129 | GPIOF_OUT_INIT_LOW, | |
130 | "GPIO extension enable"); | |
24467832 | 131 | if (err) |
cd010955 | 132 | return err; |
24467832 SG |
133 | |
134 | return 0; | |
24467832 SG |
135 | } |
136 | ||
137 | /* | |
138 | * Class LED driver. | |
139 | */ | |
140 | ||
141 | struct netxbig_led_data { | |
142 | struct netxbig_gpio_ext *gpio_ext; | |
143 | struct led_classdev cdev; | |
144 | int mode_addr; | |
145 | int *mode_val; | |
146 | int bright_addr; | |
24467832 SG |
147 | struct netxbig_led_timer *timer; |
148 | int num_timer; | |
149 | enum netxbig_led_mode mode; | |
150 | int sata; | |
151 | spinlock_t lock; | |
152 | }; | |
153 | ||
154 | static int netxbig_led_get_timer_mode(enum netxbig_led_mode *mode, | |
155 | unsigned long delay_on, | |
156 | unsigned long delay_off, | |
157 | struct netxbig_led_timer *timer, | |
158 | int num_timer) | |
159 | { | |
160 | int i; | |
161 | ||
162 | for (i = 0; i < num_timer; i++) { | |
163 | if (timer[i].delay_on == delay_on && | |
164 | timer[i].delay_off == delay_off) { | |
165 | *mode = timer[i].mode; | |
166 | return 0; | |
167 | } | |
168 | } | |
169 | return -EINVAL; | |
170 | } | |
171 | ||
172 | static int netxbig_led_blink_set(struct led_classdev *led_cdev, | |
173 | unsigned long *delay_on, | |
174 | unsigned long *delay_off) | |
175 | { | |
176 | struct netxbig_led_data *led_dat = | |
177 | container_of(led_cdev, struct netxbig_led_data, cdev); | |
178 | enum netxbig_led_mode mode; | |
179 | int mode_val; | |
180 | int ret; | |
181 | ||
182 | /* Look for a LED mode with the requested timer frequency. */ | |
183 | ret = netxbig_led_get_timer_mode(&mode, *delay_on, *delay_off, | |
184 | led_dat->timer, led_dat->num_timer); | |
185 | if (ret < 0) | |
186 | return ret; | |
187 | ||
188 | mode_val = led_dat->mode_val[mode]; | |
189 | if (mode_val == NETXBIG_LED_INVALID_MODE) | |
190 | return -EINVAL; | |
191 | ||
192 | spin_lock_irq(&led_dat->lock); | |
193 | ||
194 | gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val); | |
195 | led_dat->mode = mode; | |
196 | ||
197 | spin_unlock_irq(&led_dat->lock); | |
198 | ||
199 | return 0; | |
200 | } | |
201 | ||
202 | static void netxbig_led_set(struct led_classdev *led_cdev, | |
203 | enum led_brightness value) | |
204 | { | |
205 | struct netxbig_led_data *led_dat = | |
206 | container_of(led_cdev, struct netxbig_led_data, cdev); | |
207 | enum netxbig_led_mode mode; | |
7b9d9d88 | 208 | int mode_val; |
24467832 SG |
209 | int set_brightness = 1; |
210 | unsigned long flags; | |
211 | ||
212 | spin_lock_irqsave(&led_dat->lock, flags); | |
213 | ||
214 | if (value == LED_OFF) { | |
215 | mode = NETXBIG_LED_OFF; | |
216 | set_brightness = 0; | |
217 | } else { | |
218 | if (led_dat->sata) | |
219 | mode = NETXBIG_LED_SATA; | |
220 | else if (led_dat->mode == NETXBIG_LED_OFF) | |
221 | mode = NETXBIG_LED_ON; | |
222 | else /* Keep 'timer' mode. */ | |
223 | mode = led_dat->mode; | |
224 | } | |
225 | mode_val = led_dat->mode_val[mode]; | |
226 | ||
227 | gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val); | |
228 | led_dat->mode = mode; | |
229 | /* | |
230 | * Note that the brightness register is shared between all the | |
231 | * SATA LEDs. So, change the brightness setting for a single | |
232 | * SATA LED will affect all the others. | |
233 | */ | |
7b9d9d88 | 234 | if (set_brightness) |
24467832 | 235 | gpio_ext_set_value(led_dat->gpio_ext, |
7b9d9d88 | 236 | led_dat->bright_addr, value); |
24467832 SG |
237 | |
238 | spin_unlock_irqrestore(&led_dat->lock, flags); | |
239 | } | |
240 | ||
241 | static ssize_t netxbig_led_sata_store(struct device *dev, | |
242 | struct device_attribute *attr, | |
243 | const char *buff, size_t count) | |
244 | { | |
245 | struct led_classdev *led_cdev = dev_get_drvdata(dev); | |
246 | struct netxbig_led_data *led_dat = | |
247 | container_of(led_cdev, struct netxbig_led_data, cdev); | |
248 | unsigned long enable; | |
249 | enum netxbig_led_mode mode; | |
250 | int mode_val; | |
251 | int ret; | |
252 | ||
7517611a | 253 | ret = kstrtoul(buff, 10, &enable); |
24467832 SG |
254 | if (ret < 0) |
255 | return ret; | |
256 | ||
257 | enable = !!enable; | |
258 | ||
259 | spin_lock_irq(&led_dat->lock); | |
260 | ||
261 | if (led_dat->sata == enable) { | |
262 | ret = count; | |
263 | goto exit_unlock; | |
264 | } | |
265 | ||
266 | if (led_dat->mode != NETXBIG_LED_ON && | |
267 | led_dat->mode != NETXBIG_LED_SATA) | |
268 | mode = led_dat->mode; /* Keep modes 'off' and 'timer'. */ | |
269 | else if (enable) | |
270 | mode = NETXBIG_LED_SATA; | |
271 | else | |
272 | mode = NETXBIG_LED_ON; | |
273 | ||
274 | mode_val = led_dat->mode_val[mode]; | |
275 | if (mode_val == NETXBIG_LED_INVALID_MODE) { | |
276 | ret = -EINVAL; | |
277 | goto exit_unlock; | |
278 | } | |
279 | ||
280 | gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val); | |
281 | led_dat->mode = mode; | |
282 | led_dat->sata = enable; | |
283 | ||
284 | ret = count; | |
285 | ||
286 | exit_unlock: | |
287 | spin_unlock_irq(&led_dat->lock); | |
288 | ||
289 | return ret; | |
290 | } | |
291 | ||
292 | static ssize_t netxbig_led_sata_show(struct device *dev, | |
293 | struct device_attribute *attr, char *buf) | |
294 | { | |
295 | struct led_classdev *led_cdev = dev_get_drvdata(dev); | |
296 | struct netxbig_led_data *led_dat = | |
297 | container_of(led_cdev, struct netxbig_led_data, cdev); | |
298 | ||
299 | return sprintf(buf, "%d\n", led_dat->sata); | |
300 | } | |
301 | ||
302 | static DEVICE_ATTR(sata, 0644, netxbig_led_sata_show, netxbig_led_sata_store); | |
303 | ||
588a6a99 JH |
304 | static struct attribute *netxbig_led_attrs[] = { |
305 | &dev_attr_sata.attr, | |
306 | NULL | |
307 | }; | |
308 | ATTRIBUTE_GROUPS(netxbig_led); | |
309 | ||
cd010955 SG |
310 | static int create_netxbig_led(struct platform_device *pdev, |
311 | struct netxbig_led_platform_data *pdata, | |
312 | struct netxbig_led_data *led_dat, | |
313 | const struct netxbig_led *template) | |
24467832 | 314 | { |
24467832 SG |
315 | spin_lock_init(&led_dat->lock); |
316 | led_dat->gpio_ext = pdata->gpio_ext; | |
317 | led_dat->cdev.name = template->name; | |
318 | led_dat->cdev.default_trigger = template->default_trigger; | |
319 | led_dat->cdev.blink_set = netxbig_led_blink_set; | |
320 | led_dat->cdev.brightness_set = netxbig_led_set; | |
321 | /* | |
322 | * Because the GPIO extension bus don't allow to read registers | |
323 | * value, there is no way to probe the LED initial state. | |
324 | * So, the initial sysfs LED value for the "brightness" and "sata" | |
325 | * attributes are inconsistent. | |
326 | * | |
327 | * Note that the initial LED state can't be reconfigured. | |
328 | * The reason is that the LED behaviour must stay uniform during | |
329 | * the whole boot process (bootloader+linux). | |
330 | */ | |
331 | led_dat->sata = 0; | |
332 | led_dat->cdev.brightness = LED_OFF; | |
7b9d9d88 | 333 | led_dat->cdev.max_brightness = template->bright_max; |
24467832 SG |
334 | led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; |
335 | led_dat->mode_addr = template->mode_addr; | |
336 | led_dat->mode_val = template->mode_val; | |
337 | led_dat->bright_addr = template->bright_addr; | |
24467832 SG |
338 | led_dat->timer = pdata->timer; |
339 | led_dat->num_timer = pdata->num_timer; | |
0c86ac2c SG |
340 | /* |
341 | * If available, expose the SATA activity blink capability through | |
342 | * a "sata" sysfs attribute. | |
343 | */ | |
344 | if (led_dat->mode_val[NETXBIG_LED_SATA] != NETXBIG_LED_INVALID_MODE) | |
345 | led_dat->cdev.groups = netxbig_led_groups; | |
24467832 | 346 | |
cd010955 | 347 | return devm_led_classdev_register(&pdev->dev, &led_dat->cdev); |
24467832 SG |
348 | } |
349 | ||
2976b179 SG |
350 | static int gpio_ext_get_of_pdata(struct device *dev, struct device_node *np, |
351 | struct netxbig_gpio_ext *gpio_ext) | |
352 | { | |
353 | int *addr, *data; | |
354 | int num_addr, num_data; | |
355 | int ret; | |
356 | int i; | |
357 | ||
358 | ret = of_gpio_named_count(np, "addr-gpios"); | |
359 | if (ret < 0) { | |
360 | dev_err(dev, | |
361 | "Failed to count GPIOs in DT property addr-gpios\n"); | |
362 | return ret; | |
363 | } | |
364 | num_addr = ret; | |
a86854d0 | 365 | addr = devm_kcalloc(dev, num_addr, sizeof(*addr), GFP_KERNEL); |
2976b179 SG |
366 | if (!addr) |
367 | return -ENOMEM; | |
368 | ||
369 | for (i = 0; i < num_addr; i++) { | |
370 | ret = of_get_named_gpio(np, "addr-gpios", i); | |
371 | if (ret < 0) | |
372 | return ret; | |
373 | addr[i] = ret; | |
374 | } | |
375 | gpio_ext->addr = addr; | |
376 | gpio_ext->num_addr = num_addr; | |
377 | ||
378 | ret = of_gpio_named_count(np, "data-gpios"); | |
379 | if (ret < 0) { | |
380 | dev_err(dev, | |
381 | "Failed to count GPIOs in DT property data-gpios\n"); | |
382 | return ret; | |
383 | } | |
384 | num_data = ret; | |
a86854d0 | 385 | data = devm_kcalloc(dev, num_data, sizeof(*data), GFP_KERNEL); |
2976b179 SG |
386 | if (!data) |
387 | return -ENOMEM; | |
388 | ||
389 | for (i = 0; i < num_data; i++) { | |
390 | ret = of_get_named_gpio(np, "data-gpios", i); | |
391 | if (ret < 0) | |
392 | return ret; | |
393 | data[i] = ret; | |
394 | } | |
395 | gpio_ext->data = data; | |
396 | gpio_ext->num_data = num_data; | |
397 | ||
398 | ret = of_get_named_gpio(np, "enable-gpio", 0); | |
399 | if (ret < 0) { | |
400 | dev_err(dev, | |
401 | "Failed to get GPIO from DT property enable-gpio\n"); | |
402 | return ret; | |
403 | } | |
404 | gpio_ext->enable = ret; | |
405 | ||
406 | return 0; | |
407 | } | |
408 | ||
409 | static int netxbig_leds_get_of_pdata(struct device *dev, | |
410 | struct netxbig_led_platform_data *pdata) | |
411 | { | |
412 | struct device_node *np = dev->of_node; | |
413 | struct device_node *gpio_ext_np; | |
414 | struct device_node *child; | |
415 | struct netxbig_gpio_ext *gpio_ext; | |
416 | struct netxbig_led_timer *timers; | |
417 | struct netxbig_led *leds, *led; | |
418 | int num_timers; | |
419 | int num_leds = 0; | |
420 | int ret; | |
421 | int i; | |
422 | ||
423 | /* GPIO extension */ | |
424 | gpio_ext_np = of_parse_phandle(np, "gpio-ext", 0); | |
425 | if (!gpio_ext_np) { | |
426 | dev_err(dev, "Failed to get DT handle gpio-ext\n"); | |
427 | return -EINVAL; | |
428 | } | |
429 | ||
430 | gpio_ext = devm_kzalloc(dev, sizeof(*gpio_ext), GFP_KERNEL); | |
431 | if (!gpio_ext) | |
432 | return -ENOMEM; | |
433 | ret = gpio_ext_get_of_pdata(dev, gpio_ext_np, gpio_ext); | |
434 | if (ret) | |
435 | return ret; | |
436 | of_node_put(gpio_ext_np); | |
437 | pdata->gpio_ext = gpio_ext; | |
438 | ||
439 | /* Timers (optional) */ | |
440 | ret = of_property_count_u32_elems(np, "timers"); | |
441 | if (ret > 0) { | |
442 | if (ret % 3) | |
443 | return -EINVAL; | |
444 | num_timers = ret / 3; | |
a86854d0 | 445 | timers = devm_kcalloc(dev, num_timers, sizeof(*timers), |
2976b179 SG |
446 | GFP_KERNEL); |
447 | if (!timers) | |
448 | return -ENOMEM; | |
449 | for (i = 0; i < num_timers; i++) { | |
450 | u32 tmp; | |
451 | ||
452 | of_property_read_u32_index(np, "timers", 3 * i, | |
453 | &timers[i].mode); | |
454 | if (timers[i].mode >= NETXBIG_LED_MODE_NUM) | |
455 | return -EINVAL; | |
456 | of_property_read_u32_index(np, "timers", | |
457 | 3 * i + 1, &tmp); | |
458 | timers[i].delay_on = tmp; | |
459 | of_property_read_u32_index(np, "timers", | |
460 | 3 * i + 2, &tmp); | |
461 | timers[i].delay_off = tmp; | |
462 | } | |
463 | pdata->timer = timers; | |
464 | pdata->num_timer = num_timers; | |
465 | } | |
466 | ||
467 | /* LEDs */ | |
468 | num_leds = of_get_child_count(np); | |
469 | if (!num_leds) { | |
470 | dev_err(dev, "No LED subnodes found in DT\n"); | |
471 | return -ENODEV; | |
472 | } | |
473 | ||
a86854d0 | 474 | leds = devm_kcalloc(dev, num_leds, sizeof(*leds), GFP_KERNEL); |
2976b179 SG |
475 | if (!leds) |
476 | return -ENOMEM; | |
477 | ||
478 | led = leds; | |
479 | for_each_child_of_node(np, child) { | |
480 | const char *string; | |
481 | int *mode_val; | |
482 | int num_modes; | |
483 | ||
484 | ret = of_property_read_u32(child, "mode-addr", | |
485 | &led->mode_addr); | |
486 | if (ret) | |
487 | goto err_node_put; | |
488 | ||
489 | ret = of_property_read_u32(child, "bright-addr", | |
490 | &led->bright_addr); | |
491 | if (ret) | |
492 | goto err_node_put; | |
493 | ||
494 | ret = of_property_read_u32(child, "max-brightness", | |
495 | &led->bright_max); | |
496 | if (ret) | |
497 | goto err_node_put; | |
498 | ||
499 | mode_val = | |
a86854d0 KC |
500 | devm_kcalloc(dev, |
501 | NETXBIG_LED_MODE_NUM, sizeof(*mode_val), | |
2976b179 SG |
502 | GFP_KERNEL); |
503 | if (!mode_val) { | |
504 | ret = -ENOMEM; | |
505 | goto err_node_put; | |
506 | } | |
507 | ||
508 | for (i = 0; i < NETXBIG_LED_MODE_NUM; i++) | |
509 | mode_val[i] = NETXBIG_LED_INVALID_MODE; | |
510 | ||
511 | ret = of_property_count_u32_elems(child, "mode-val"); | |
512 | if (ret < 0 || ret % 2) { | |
513 | ret = -EINVAL; | |
514 | goto err_node_put; | |
515 | } | |
516 | num_modes = ret / 2; | |
517 | if (num_modes > NETXBIG_LED_MODE_NUM) { | |
518 | ret = -EINVAL; | |
519 | goto err_node_put; | |
520 | } | |
521 | ||
522 | for (i = 0; i < num_modes; i++) { | |
523 | int mode; | |
524 | int val; | |
525 | ||
526 | of_property_read_u32_index(child, | |
527 | "mode-val", 2 * i, &mode); | |
528 | of_property_read_u32_index(child, | |
529 | "mode-val", 2 * i + 1, &val); | |
530 | if (mode >= NETXBIG_LED_MODE_NUM) { | |
531 | ret = -EINVAL; | |
532 | goto err_node_put; | |
533 | } | |
534 | mode_val[mode] = val; | |
535 | } | |
536 | led->mode_val = mode_val; | |
537 | ||
538 | if (!of_property_read_string(child, "label", &string)) | |
539 | led->name = string; | |
540 | else | |
541 | led->name = child->name; | |
542 | ||
543 | if (!of_property_read_string(child, | |
544 | "linux,default-trigger", &string)) | |
545 | led->default_trigger = string; | |
546 | ||
547 | led++; | |
548 | } | |
549 | ||
550 | pdata->leds = leds; | |
551 | pdata->num_leds = num_leds; | |
552 | ||
553 | return 0; | |
554 | ||
555 | err_node_put: | |
556 | of_node_put(child); | |
557 | return ret; | |
558 | } | |
559 | ||
560 | static const struct of_device_id of_netxbig_leds_match[] = { | |
561 | { .compatible = "lacie,netxbig-leds", }, | |
562 | {}, | |
563 | }; | |
825fe38a | 564 | MODULE_DEVICE_TABLE(of, of_netxbig_leds_match); |
2976b179 | 565 | |
98ea1ea2 | 566 | static int netxbig_led_probe(struct platform_device *pdev) |
24467832 | 567 | { |
156189a6 | 568 | struct netxbig_led_platform_data *pdata; |
cd010955 | 569 | struct netxbig_led_data *leds_data; |
24467832 SG |
570 | int i; |
571 | int ret; | |
572 | ||
156189a6 MY |
573 | pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); |
574 | if (!pdata) | |
575 | return -ENOMEM; | |
576 | ret = netxbig_leds_get_of_pdata(&pdev->dev, pdata); | |
577 | if (ret) | |
578 | return ret; | |
24467832 | 579 | |
a86854d0 KC |
580 | leds_data = devm_kcalloc(&pdev->dev, |
581 | pdata->num_leds, sizeof(*leds_data), | |
cd010955 SG |
582 | GFP_KERNEL); |
583 | if (!leds_data) | |
24467832 SG |
584 | return -ENOMEM; |
585 | ||
cd010955 | 586 | ret = gpio_ext_init(pdev, pdata->gpio_ext); |
24467832 | 587 | if (ret < 0) |
8095c385 | 588 | return ret; |
24467832 SG |
589 | |
590 | for (i = 0; i < pdata->num_leds; i++) { | |
cd010955 SG |
591 | ret = create_netxbig_led(pdev, pdata, |
592 | &leds_data[i], &pdata->leds[i]); | |
24467832 | 593 | if (ret < 0) |
cd010955 | 594 | return ret; |
24467832 | 595 | } |
24467832 SG |
596 | |
597 | return 0; | |
598 | } | |
599 | ||
600 | static struct platform_driver netxbig_led_driver = { | |
601 | .probe = netxbig_led_probe, | |
24467832 | 602 | .driver = { |
2976b179 | 603 | .name = "leds-netxbig", |
156189a6 | 604 | .of_match_table = of_netxbig_leds_match, |
24467832 SG |
605 | }, |
606 | }; | |
24467832 | 607 | |
892a8843 | 608 | module_platform_driver(netxbig_led_driver); |
24467832 SG |
609 | |
610 | MODULE_AUTHOR("Simon Guinot <sguinot@lacie.com>"); | |
611 | MODULE_DESCRIPTION("LED driver for LaCie xBig Network boards"); | |
612 | MODULE_LICENSE("GPL"); | |
892a8843 | 613 | MODULE_ALIAS("platform:leds-netxbig"); |