]>
Commit | Line | Data |
---|---|---|
24467832 SG |
1 | /* |
2 | * leds-netxbig.c - Driver for the 2Big and 5Big Network series LEDs | |
3 | * | |
4 | * Copyright (C) 2010 LaCie | |
5 | * | |
6 | * Author: Simon Guinot <sguinot@lacie.com> | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or modify | |
9 | * it under the terms of the GNU General Public License as published by | |
10 | * the Free Software Foundation; either version 2 of the License, or | |
11 | * (at your option) any later version. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, | |
14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | * GNU General Public License for more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License | |
19 | * along with this program; if not, write to the Free Software | |
20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
21 | */ | |
22 | ||
23 | #include <linux/module.h> | |
24 | #include <linux/init.h> | |
25 | #include <linux/irq.h> | |
26 | #include <linux/slab.h> | |
27 | #include <linux/spinlock.h> | |
28 | #include <linux/platform_device.h> | |
29 | #include <linux/gpio.h> | |
30 | #include <linux/leds.h> | |
31 | #include <mach/leds-netxbig.h> | |
32 | ||
33 | /* | |
34 | * GPIO extension bus. | |
35 | */ | |
36 | ||
37 | static DEFINE_SPINLOCK(gpio_ext_lock); | |
38 | ||
39 | static void gpio_ext_set_addr(struct netxbig_gpio_ext *gpio_ext, int addr) | |
40 | { | |
41 | int pin; | |
42 | ||
43 | for (pin = 0; pin < gpio_ext->num_addr; pin++) | |
44 | gpio_set_value(gpio_ext->addr[pin], (addr >> pin) & 1); | |
45 | } | |
46 | ||
47 | static void gpio_ext_set_data(struct netxbig_gpio_ext *gpio_ext, int data) | |
48 | { | |
49 | int pin; | |
50 | ||
51 | for (pin = 0; pin < gpio_ext->num_data; pin++) | |
52 | gpio_set_value(gpio_ext->data[pin], (data >> pin) & 1); | |
53 | } | |
54 | ||
55 | static void gpio_ext_enable_select(struct netxbig_gpio_ext *gpio_ext) | |
56 | { | |
57 | /* Enable select is done on the raising edge. */ | |
58 | gpio_set_value(gpio_ext->enable, 0); | |
59 | gpio_set_value(gpio_ext->enable, 1); | |
60 | } | |
61 | ||
62 | static void gpio_ext_set_value(struct netxbig_gpio_ext *gpio_ext, | |
63 | int addr, int value) | |
64 | { | |
65 | unsigned long flags; | |
66 | ||
67 | spin_lock_irqsave(&gpio_ext_lock, flags); | |
68 | gpio_ext_set_addr(gpio_ext, addr); | |
69 | gpio_ext_set_data(gpio_ext, value); | |
70 | gpio_ext_enable_select(gpio_ext); | |
71 | spin_unlock_irqrestore(&gpio_ext_lock, flags); | |
72 | } | |
73 | ||
74 | static int __devinit gpio_ext_init(struct netxbig_gpio_ext *gpio_ext) | |
75 | { | |
76 | int err; | |
77 | int i; | |
78 | ||
79 | if (unlikely(!gpio_ext)) | |
80 | return -EINVAL; | |
81 | ||
82 | /* Configure address GPIOs. */ | |
83 | for (i = 0; i < gpio_ext->num_addr; i++) { | |
84 | err = gpio_request(gpio_ext->addr[i], "GPIO extension addr"); | |
85 | if (err) | |
86 | goto err_free_addr; | |
87 | err = gpio_direction_output(gpio_ext->addr[i], 0); | |
88 | if (err) { | |
89 | gpio_free(gpio_ext->addr[i]); | |
90 | goto err_free_addr; | |
91 | } | |
92 | } | |
93 | /* Configure data GPIOs. */ | |
94 | for (i = 0; i < gpio_ext->num_data; i++) { | |
95 | err = gpio_request(gpio_ext->data[i], "GPIO extension data"); | |
96 | if (err) | |
97 | goto err_free_data; | |
98 | err = gpio_direction_output(gpio_ext->data[i], 0); | |
99 | if (err) { | |
100 | gpio_free(gpio_ext->data[i]); | |
101 | goto err_free_data; | |
102 | } | |
103 | } | |
104 | /* Configure "enable select" GPIO. */ | |
105 | err = gpio_request(gpio_ext->enable, "GPIO extension enable"); | |
106 | if (err) | |
107 | goto err_free_data; | |
108 | err = gpio_direction_output(gpio_ext->enable, 0); | |
109 | if (err) { | |
110 | gpio_free(gpio_ext->enable); | |
111 | goto err_free_data; | |
112 | } | |
113 | ||
114 | return 0; | |
115 | ||
116 | err_free_data: | |
117 | for (i = i - 1; i >= 0; i--) | |
118 | gpio_free(gpio_ext->data[i]); | |
119 | i = gpio_ext->num_addr; | |
120 | err_free_addr: | |
121 | for (i = i - 1; i >= 0; i--) | |
122 | gpio_free(gpio_ext->addr[i]); | |
123 | ||
124 | return err; | |
125 | } | |
126 | ||
127 | static void __devexit gpio_ext_free(struct netxbig_gpio_ext *gpio_ext) | |
128 | { | |
129 | int i; | |
130 | ||
131 | gpio_free(gpio_ext->enable); | |
132 | for (i = gpio_ext->num_addr - 1; i >= 0; i--) | |
133 | gpio_free(gpio_ext->addr[i]); | |
134 | for (i = gpio_ext->num_data - 1; i >= 0; i--) | |
135 | gpio_free(gpio_ext->data[i]); | |
136 | } | |
137 | ||
138 | /* | |
139 | * Class LED driver. | |
140 | */ | |
141 | ||
142 | struct netxbig_led_data { | |
143 | struct netxbig_gpio_ext *gpio_ext; | |
144 | struct led_classdev cdev; | |
145 | int mode_addr; | |
146 | int *mode_val; | |
147 | int bright_addr; | |
148 | int bright_max; | |
149 | struct netxbig_led_timer *timer; | |
150 | int num_timer; | |
151 | enum netxbig_led_mode mode; | |
152 | int sata; | |
153 | spinlock_t lock; | |
154 | }; | |
155 | ||
156 | static int netxbig_led_get_timer_mode(enum netxbig_led_mode *mode, | |
157 | unsigned long delay_on, | |
158 | unsigned long delay_off, | |
159 | struct netxbig_led_timer *timer, | |
160 | int num_timer) | |
161 | { | |
162 | int i; | |
163 | ||
164 | for (i = 0; i < num_timer; i++) { | |
165 | if (timer[i].delay_on == delay_on && | |
166 | timer[i].delay_off == delay_off) { | |
167 | *mode = timer[i].mode; | |
168 | return 0; | |
169 | } | |
170 | } | |
171 | return -EINVAL; | |
172 | } | |
173 | ||
174 | static int netxbig_led_blink_set(struct led_classdev *led_cdev, | |
175 | unsigned long *delay_on, | |
176 | unsigned long *delay_off) | |
177 | { | |
178 | struct netxbig_led_data *led_dat = | |
179 | container_of(led_cdev, struct netxbig_led_data, cdev); | |
180 | enum netxbig_led_mode mode; | |
181 | int mode_val; | |
182 | int ret; | |
183 | ||
184 | /* Look for a LED mode with the requested timer frequency. */ | |
185 | ret = netxbig_led_get_timer_mode(&mode, *delay_on, *delay_off, | |
186 | led_dat->timer, led_dat->num_timer); | |
187 | if (ret < 0) | |
188 | return ret; | |
189 | ||
190 | mode_val = led_dat->mode_val[mode]; | |
191 | if (mode_val == NETXBIG_LED_INVALID_MODE) | |
192 | return -EINVAL; | |
193 | ||
194 | spin_lock_irq(&led_dat->lock); | |
195 | ||
196 | gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val); | |
197 | led_dat->mode = mode; | |
198 | ||
199 | spin_unlock_irq(&led_dat->lock); | |
200 | ||
201 | return 0; | |
202 | } | |
203 | ||
204 | static void netxbig_led_set(struct led_classdev *led_cdev, | |
205 | enum led_brightness value) | |
206 | { | |
207 | struct netxbig_led_data *led_dat = | |
208 | container_of(led_cdev, struct netxbig_led_data, cdev); | |
209 | enum netxbig_led_mode mode; | |
210 | int mode_val, bright_val; | |
211 | int set_brightness = 1; | |
212 | unsigned long flags; | |
213 | ||
214 | spin_lock_irqsave(&led_dat->lock, flags); | |
215 | ||
216 | if (value == LED_OFF) { | |
217 | mode = NETXBIG_LED_OFF; | |
218 | set_brightness = 0; | |
219 | } else { | |
220 | if (led_dat->sata) | |
221 | mode = NETXBIG_LED_SATA; | |
222 | else if (led_dat->mode == NETXBIG_LED_OFF) | |
223 | mode = NETXBIG_LED_ON; | |
224 | else /* Keep 'timer' mode. */ | |
225 | mode = led_dat->mode; | |
226 | } | |
227 | mode_val = led_dat->mode_val[mode]; | |
228 | ||
229 | gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val); | |
230 | led_dat->mode = mode; | |
231 | /* | |
232 | * Note that the brightness register is shared between all the | |
233 | * SATA LEDs. So, change the brightness setting for a single | |
234 | * SATA LED will affect all the others. | |
235 | */ | |
236 | if (set_brightness) { | |
237 | bright_val = DIV_ROUND_UP(value * led_dat->bright_max, | |
238 | LED_FULL); | |
239 | gpio_ext_set_value(led_dat->gpio_ext, | |
240 | led_dat->bright_addr, bright_val); | |
241 | } | |
242 | ||
243 | spin_unlock_irqrestore(&led_dat->lock, flags); | |
244 | } | |
245 | ||
246 | static ssize_t netxbig_led_sata_store(struct device *dev, | |
247 | struct device_attribute *attr, | |
248 | const char *buff, size_t count) | |
249 | { | |
250 | struct led_classdev *led_cdev = dev_get_drvdata(dev); | |
251 | struct netxbig_led_data *led_dat = | |
252 | container_of(led_cdev, struct netxbig_led_data, cdev); | |
253 | unsigned long enable; | |
254 | enum netxbig_led_mode mode; | |
255 | int mode_val; | |
256 | int ret; | |
257 | ||
258 | ret = strict_strtoul(buff, 10, &enable); | |
259 | if (ret < 0) | |
260 | return ret; | |
261 | ||
262 | enable = !!enable; | |
263 | ||
264 | spin_lock_irq(&led_dat->lock); | |
265 | ||
266 | if (led_dat->sata == enable) { | |
267 | ret = count; | |
268 | goto exit_unlock; | |
269 | } | |
270 | ||
271 | if (led_dat->mode != NETXBIG_LED_ON && | |
272 | led_dat->mode != NETXBIG_LED_SATA) | |
273 | mode = led_dat->mode; /* Keep modes 'off' and 'timer'. */ | |
274 | else if (enable) | |
275 | mode = NETXBIG_LED_SATA; | |
276 | else | |
277 | mode = NETXBIG_LED_ON; | |
278 | ||
279 | mode_val = led_dat->mode_val[mode]; | |
280 | if (mode_val == NETXBIG_LED_INVALID_MODE) { | |
281 | ret = -EINVAL; | |
282 | goto exit_unlock; | |
283 | } | |
284 | ||
285 | gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val); | |
286 | led_dat->mode = mode; | |
287 | led_dat->sata = enable; | |
288 | ||
289 | ret = count; | |
290 | ||
291 | exit_unlock: | |
292 | spin_unlock_irq(&led_dat->lock); | |
293 | ||
294 | return ret; | |
295 | } | |
296 | ||
297 | static ssize_t netxbig_led_sata_show(struct device *dev, | |
298 | struct device_attribute *attr, char *buf) | |
299 | { | |
300 | struct led_classdev *led_cdev = dev_get_drvdata(dev); | |
301 | struct netxbig_led_data *led_dat = | |
302 | container_of(led_cdev, struct netxbig_led_data, cdev); | |
303 | ||
304 | return sprintf(buf, "%d\n", led_dat->sata); | |
305 | } | |
306 | ||
307 | static DEVICE_ATTR(sata, 0644, netxbig_led_sata_show, netxbig_led_sata_store); | |
308 | ||
309 | static void __devexit delete_netxbig_led(struct netxbig_led_data *led_dat) | |
310 | { | |
311 | if (led_dat->mode_val[NETXBIG_LED_SATA] != NETXBIG_LED_INVALID_MODE) | |
312 | device_remove_file(led_dat->cdev.dev, &dev_attr_sata); | |
313 | led_classdev_unregister(&led_dat->cdev); | |
314 | } | |
315 | ||
316 | static int __devinit | |
317 | create_netxbig_led(struct platform_device *pdev, | |
318 | struct netxbig_led_data *led_dat, | |
319 | const struct netxbig_led *template) | |
320 | { | |
321 | struct netxbig_led_platform_data *pdata = pdev->dev.platform_data; | |
322 | int ret; | |
323 | ||
324 | spin_lock_init(&led_dat->lock); | |
325 | led_dat->gpio_ext = pdata->gpio_ext; | |
326 | led_dat->cdev.name = template->name; | |
327 | led_dat->cdev.default_trigger = template->default_trigger; | |
328 | led_dat->cdev.blink_set = netxbig_led_blink_set; | |
329 | led_dat->cdev.brightness_set = netxbig_led_set; | |
330 | /* | |
331 | * Because the GPIO extension bus don't allow to read registers | |
332 | * value, there is no way to probe the LED initial state. | |
333 | * So, the initial sysfs LED value for the "brightness" and "sata" | |
334 | * attributes are inconsistent. | |
335 | * | |
336 | * Note that the initial LED state can't be reconfigured. | |
337 | * The reason is that the LED behaviour must stay uniform during | |
338 | * the whole boot process (bootloader+linux). | |
339 | */ | |
340 | led_dat->sata = 0; | |
341 | led_dat->cdev.brightness = LED_OFF; | |
342 | led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; | |
343 | led_dat->mode_addr = template->mode_addr; | |
344 | led_dat->mode_val = template->mode_val; | |
345 | led_dat->bright_addr = template->bright_addr; | |
346 | led_dat->bright_max = (1 << pdata->gpio_ext->num_data) - 1; | |
347 | led_dat->timer = pdata->timer; | |
348 | led_dat->num_timer = pdata->num_timer; | |
349 | ||
350 | ret = led_classdev_register(&pdev->dev, &led_dat->cdev); | |
351 | if (ret < 0) | |
352 | return ret; | |
353 | ||
354 | /* | |
355 | * If available, expose the SATA activity blink capability through | |
356 | * a "sata" sysfs attribute. | |
357 | */ | |
358 | if (led_dat->mode_val[NETXBIG_LED_SATA] != NETXBIG_LED_INVALID_MODE) { | |
359 | ret = device_create_file(led_dat->cdev.dev, &dev_attr_sata); | |
360 | if (ret) | |
361 | led_classdev_unregister(&led_dat->cdev); | |
362 | } | |
363 | ||
364 | return ret; | |
365 | } | |
366 | ||
367 | static int __devinit netxbig_led_probe(struct platform_device *pdev) | |
368 | { | |
369 | struct netxbig_led_platform_data *pdata = pdev->dev.platform_data; | |
370 | struct netxbig_led_data *leds_data; | |
371 | int i; | |
372 | int ret; | |
373 | ||
374 | if (!pdata) | |
375 | return -EINVAL; | |
376 | ||
377 | leds_data = kzalloc(sizeof(struct netxbig_led_data) * pdata->num_leds, | |
378 | GFP_KERNEL); | |
379 | if (!leds_data) | |
380 | return -ENOMEM; | |
381 | ||
382 | ret = gpio_ext_init(pdata->gpio_ext); | |
383 | if (ret < 0) | |
384 | goto err_free_data; | |
385 | ||
386 | for (i = 0; i < pdata->num_leds; i++) { | |
387 | ret = create_netxbig_led(pdev, &leds_data[i], &pdata->leds[i]); | |
388 | if (ret < 0) | |
389 | goto err_free_leds; | |
390 | } | |
391 | ||
392 | platform_set_drvdata(pdev, leds_data); | |
393 | ||
394 | return 0; | |
395 | ||
396 | err_free_leds: | |
397 | for (i = i - 1; i >= 0; i--) | |
398 | delete_netxbig_led(&leds_data[i]); | |
399 | ||
400 | gpio_ext_free(pdata->gpio_ext); | |
401 | err_free_data: | |
402 | kfree(leds_data); | |
403 | ||
404 | return ret; | |
405 | } | |
406 | ||
407 | static int __devexit netxbig_led_remove(struct platform_device *pdev) | |
408 | { | |
409 | struct netxbig_led_platform_data *pdata = pdev->dev.platform_data; | |
410 | struct netxbig_led_data *leds_data; | |
411 | int i; | |
412 | ||
413 | leds_data = platform_get_drvdata(pdev); | |
414 | ||
415 | for (i = 0; i < pdata->num_leds; i++) | |
416 | delete_netxbig_led(&leds_data[i]); | |
417 | ||
418 | gpio_ext_free(pdata->gpio_ext); | |
419 | kfree(leds_data); | |
420 | ||
421 | return 0; | |
422 | } | |
423 | ||
424 | static struct platform_driver netxbig_led_driver = { | |
425 | .probe = netxbig_led_probe, | |
426 | .remove = __devexit_p(netxbig_led_remove), | |
427 | .driver = { | |
428 | .name = "leds-netxbig", | |
429 | .owner = THIS_MODULE, | |
430 | }, | |
431 | }; | |
432 | MODULE_ALIAS("platform:leds-netxbig"); | |
433 | ||
434 | static int __init netxbig_led_init(void) | |
435 | { | |
436 | return platform_driver_register(&netxbig_led_driver); | |
437 | } | |
438 | ||
439 | static void __exit netxbig_led_exit(void) | |
440 | { | |
441 | platform_driver_unregister(&netxbig_led_driver); | |
442 | } | |
443 | ||
444 | module_init(netxbig_led_init); | |
445 | module_exit(netxbig_led_exit); | |
446 | ||
447 | MODULE_AUTHOR("Simon Guinot <sguinot@lacie.com>"); | |
448 | MODULE_DESCRIPTION("LED driver for LaCie xBig Network boards"); | |
449 | MODULE_LICENSE("GPL"); |