]>
Commit | Line | Data |
---|---|---|
941491f3 MG |
1 | /* DVB USB framework compliant Linux driver for the Opera1 DVB-S Card |
2 | * | |
3 | * Copyright (C) 2006 Mario Hlawitschka (dh1pa@amsat.org) | |
4 | * Copyright (C) 2006 Marco Gittler (g.marco@freenet.de) | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify it | |
7 | * under the terms of the GNU General Public License as published by the Free | |
8 | * Software Foundation, version 2. | |
9 | * | |
10 | * see Documentation/dvb/README.dvb-usb for more information | |
11 | */ | |
12 | ||
13 | #include "opera1.h" | |
14 | #include "stv0299.h" | |
15 | ||
16 | #define OPERA_READ_MSG 0 | |
17 | #define OPERA_WRITE_MSG 1 | |
18 | #define OPERA_I2C_TUNER 0xd1 | |
19 | ||
20 | #define READ_FX2_REG_REQ 0xba | |
21 | #define READ_MAC_ADDR 0x08 | |
22 | #define OPERA_WRITE_FX2 0xbb | |
23 | #define OPERA_TUNER_REQ 0xb1 | |
24 | #define REG_1F_SYMBOLRATE_BYTE0 0x1f | |
25 | #define REG_20_SYMBOLRATE_BYTE1 0x20 | |
26 | #define REG_21_SYMBOLRATE_BYTE2 0x21 | |
27 | ||
86534e5e MG |
28 | #define ADDR_B600_VOLTAGE_13V (0x02) |
29 | #define ADDR_B601_VOLTAGE_18V (0x03) | |
30 | #define ADDR_B1A6_STREAM_CTRL (0x04) | |
31 | #define ADDR_B880_READ_REMOTE (0x05) | |
32 | ||
941491f3 MG |
33 | struct opera1_state { |
34 | u32 last_key_pressed; | |
35 | }; | |
36 | struct opera_rc_keys { | |
37 | u32 keycode; | |
38 | u32 event; | |
39 | }; | |
40 | ||
41 | int dvb_usb_opera1_debug; | |
42 | module_param_named(debug, dvb_usb_opera1_debug, int, 0644); | |
43 | MODULE_PARM_DESC(debug, | |
44 | "set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64 (or-able))." | |
45 | DVB_USB_DEBUG_STATUS); | |
46 | ||
47 | static int opera1_xilinx_rw(struct usb_device *dev, u8 request, u16 value, | |
48 | u8 * data, u16 len, int flags) | |
49 | { | |
50 | int ret; | |
51 | u8 r; | |
52 | u8 u8buf[len]; | |
53 | ||
54 | unsigned int pipe = (flags == OPERA_READ_MSG) ? | |
55 | usb_rcvctrlpipe(dev,0) : usb_sndctrlpipe(dev, 0); | |
56 | u8 request_type = (flags == OPERA_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT; | |
57 | ||
58 | if (flags == OPERA_WRITE_MSG) | |
59 | memcpy(u8buf, data, len); | |
60 | ret = | |
61 | usb_control_msg(dev, pipe, request, request_type | USB_TYPE_VENDOR, | |
62 | value, 0x0, u8buf, len, 2000); | |
63 | ||
64 | if (request == OPERA_TUNER_REQ) { | |
65 | if (usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), | |
66 | OPERA_TUNER_REQ, USB_DIR_IN | USB_TYPE_VENDOR, | |
67 | 0x01, 0x0, &r, 1, 2000)<1 || r!=0x08) | |
68 | return 0; | |
69 | } | |
70 | if (flags == OPERA_READ_MSG) | |
71 | memcpy(data, u8buf, len); | |
72 | return ret; | |
73 | } | |
74 | ||
75 | /* I2C */ | |
76 | ||
77 | static int opera1_usb_i2c_msgxfer(struct dvb_usb_device *dev, u16 addr, | |
86534e5e | 78 | u8 * buf, u16 len) |
941491f3 MG |
79 | { |
80 | int ret = 0; | |
81 | u8 request; | |
82 | u16 value; | |
83 | ||
84 | if (!dev) { | |
85 | info("no usb_device"); | |
86 | return -EINVAL; | |
87 | } | |
88 | if (mutex_lock_interruptible(&dev->usb_mutex) < 0) | |
89 | return -EAGAIN; | |
90 | ||
86534e5e MG |
91 | switch (addr>>1){ |
92 | case ADDR_B600_VOLTAGE_13V: | |
93 | request=0xb6; | |
94 | value=0x00; | |
95 | break; | |
96 | case ADDR_B601_VOLTAGE_18V: | |
97 | request=0xb6; | |
98 | value=0x01; | |
99 | break; | |
100 | case ADDR_B1A6_STREAM_CTRL: | |
101 | request=0xb1; | |
102 | value=0xa6; | |
103 | break; | |
104 | case ADDR_B880_READ_REMOTE: | |
105 | request=0xb8; | |
106 | value=0x80; | |
107 | break; | |
108 | default: | |
109 | request=0xb1; | |
110 | value=addr; | |
941491f3 | 111 | } |
86534e5e MG |
112 | ret = opera1_xilinx_rw(dev->udev, request, |
113 | value, buf, len, | |
114 | addr&0x01?OPERA_READ_MSG:OPERA_WRITE_MSG); | |
941491f3 MG |
115 | |
116 | mutex_unlock(&dev->usb_mutex); | |
117 | return ret; | |
118 | } | |
119 | ||
120 | static int opera1_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], | |
121 | int num) | |
122 | { | |
123 | struct dvb_usb_device *d = i2c_get_adapdata(adap); | |
124 | int i = 0, tmp = 0; | |
125 | ||
126 | if (!d) | |
127 | return -ENODEV; | |
128 | if (mutex_lock_interruptible(&d->i2c_mutex) < 0) | |
129 | return -EAGAIN; | |
130 | ||
131 | for (i = 0; i < num; i++) { | |
132 | if ((tmp = opera1_usb_i2c_msgxfer(d, | |
86534e5e | 133 | (msg[i].addr<<1)|(msg[i].flags&I2C_M_RD?0x01:0), |
941491f3 | 134 | msg[i].buf, |
86534e5e MG |
135 | msg[i].len |
136 | )!= msg[i].len)) { | |
941491f3 MG |
137 | break; |
138 | } | |
139 | if (dvb_usb_opera1_debug & 0x10) | |
140 | info("sending i2c mesage %d %d", tmp, msg[i].len); | |
141 | } | |
142 | mutex_unlock(&d->i2c_mutex); | |
143 | return num; | |
144 | } | |
145 | ||
146 | static u32 opera1_i2c_func(struct i2c_adapter *adapter) | |
147 | { | |
148 | return I2C_FUNC_I2C; | |
149 | } | |
150 | ||
151 | static struct i2c_algorithm opera1_i2c_algo = { | |
152 | .master_xfer = opera1_i2c_xfer, | |
153 | .functionality = opera1_i2c_func, | |
154 | }; | |
155 | ||
156 | static int opera1_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) | |
157 | { | |
158 | static u8 command_13v[1]={0x00}; | |
159 | static u8 command_18v[1]={0x01}; | |
160 | struct i2c_msg msg[] = { | |
86534e5e | 161 | {.addr = ADDR_B600_VOLTAGE_13V,.flags = 0,.buf = command_13v,.len = 1}, |
941491f3 MG |
162 | }; |
163 | struct dvb_usb_adapter *udev_adap = | |
164 | (struct dvb_usb_adapter *)(fe->dvb->priv); | |
165 | if (voltage == SEC_VOLTAGE_18) { | |
86534e5e | 166 | msg[0].addr = ADDR_B601_VOLTAGE_18V; |
941491f3 MG |
167 | msg[0].buf = command_18v; |
168 | } | |
169 | i2c_transfer(&udev_adap->dev->i2c_adap, msg, 1); | |
170 | return 0; | |
171 | } | |
172 | ||
173 | static int opera1_stv0299_set_symbol_rate(struct dvb_frontend *fe, u32 srate, | |
174 | u32 ratio) | |
175 | { | |
176 | stv0299_writereg(fe, 0x13, 0x98); | |
177 | stv0299_writereg(fe, 0x14, 0x95); | |
178 | stv0299_writereg(fe, REG_1F_SYMBOLRATE_BYTE0, (ratio >> 16) & 0xff); | |
179 | stv0299_writereg(fe, REG_20_SYMBOLRATE_BYTE1, (ratio >> 8) & 0xff); | |
180 | stv0299_writereg(fe, REG_21_SYMBOLRATE_BYTE2, (ratio) & 0xf0); | |
181 | return 0; | |
182 | ||
183 | } | |
184 | static u8 opera1_inittab[] = { | |
185 | 0x00, 0xa1, | |
186 | 0x01, 0x15, | |
187 | 0x02, 0x00, | |
188 | 0x03, 0x00, | |
189 | 0x04, 0x7d, | |
190 | 0x05, 0x05, | |
191 | 0x06, 0x02, | |
192 | 0x07, 0x00, | |
193 | 0x0b, 0x00, | |
194 | 0x0c, 0x01, | |
195 | 0x0d, 0x81, | |
196 | 0x0e, 0x44, | |
197 | 0x0f, 0x19, | |
198 | 0x10, 0x3f, | |
199 | 0x11, 0x84, | |
200 | 0x12, 0xda, | |
201 | 0x13, 0x98, | |
202 | 0x14, 0x95, | |
203 | 0x15, 0xc9, | |
204 | 0x16, 0xeb, | |
205 | 0x17, 0x00, | |
206 | 0x18, 0x19, | |
207 | 0x19, 0x8b, | |
208 | 0x1a, 0x00, | |
209 | 0x1b, 0x82, | |
210 | 0x1c, 0x7f, | |
211 | 0x1d, 0x00, | |
212 | 0x1e, 0x00, | |
213 | REG_1F_SYMBOLRATE_BYTE0, 0x06, | |
214 | REG_20_SYMBOLRATE_BYTE1, 0x50, | |
215 | REG_21_SYMBOLRATE_BYTE2, 0x10, | |
216 | 0x22, 0x00, | |
217 | 0x23, 0x00, | |
218 | 0x24, 0x37, | |
219 | 0x25, 0xbc, | |
220 | 0x26, 0x00, | |
221 | 0x27, 0x00, | |
222 | 0x28, 0x00, | |
223 | 0x29, 0x1e, | |
224 | 0x2a, 0x14, | |
225 | 0x2b, 0x1f, | |
226 | 0x2c, 0x09, | |
227 | 0x2d, 0x0a, | |
228 | 0x2e, 0x00, | |
229 | 0x2f, 0x00, | |
230 | 0x30, 0x00, | |
231 | 0x31, 0x1f, | |
232 | 0x32, 0x19, | |
233 | 0x33, 0xfc, | |
234 | 0x34, 0x13, | |
235 | 0xff, 0xff, | |
236 | }; | |
237 | ||
238 | static struct stv0299_config opera1_stv0299_config = { | |
86534e5e | 239 | .demod_address = 0xd0>>1, |
941491f3 MG |
240 | .min_delay_ms = 100, |
241 | .mclk = 88000000UL, | |
242 | .invert = 1, | |
243 | .skip_reinit = 0, | |
244 | .lock_output = STV0229_LOCKOUTPUT_0, | |
245 | .volt13_op0_op1 = STV0299_VOLT13_OP0, | |
246 | .inittab = opera1_inittab, | |
247 | .set_symbol_rate = opera1_stv0299_set_symbol_rate, | |
248 | }; | |
249 | ||
250 | static int opera1_frontend_attach(struct dvb_usb_adapter *d) | |
251 | { | |
252 | if ((d->fe = | |
253 | dvb_attach(stv0299_attach, &opera1_stv0299_config, | |
254 | &d->dev->i2c_adap)) != NULL) { | |
255 | d->fe->ops.set_voltage = opera1_set_voltage; | |
256 | return 0; | |
257 | } | |
258 | info("not attached stv0299"); | |
259 | return -EIO; | |
260 | } | |
261 | ||
262 | static int opera1_tuner_attach(struct dvb_usb_adapter *adap) | |
263 | { | |
86534e5e MG |
264 | dvb_attach( |
265 | dvb_pll_attach, adap->fe, 0xc0>>1, | |
47a9991e | 266 | &adap->dev->i2c_adap, DVB_PLL_OPERA1 |
86534e5e | 267 | ); |
941491f3 MG |
268 | return 0; |
269 | } | |
270 | ||
271 | static int opera1_power_ctrl(struct dvb_usb_device *d, int onoff) | |
272 | { | |
941491f3 | 273 | u8 val = onoff ? 0x01 : 0x00; |
86534e5e | 274 | |
941491f3 MG |
275 | if (dvb_usb_opera1_debug) |
276 | info("power %s", onoff ? "on" : "off"); | |
86534e5e MG |
277 | return opera1_xilinx_rw(d->udev, 0xb7, val, |
278 | &val, 1, OPERA_WRITE_MSG); | |
941491f3 MG |
279 | } |
280 | ||
281 | static int opera1_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) | |
282 | { | |
283 | static u8 buf_start[2] = { 0xff, 0x03 }; | |
284 | static u8 buf_stop[2] = { 0xff, 0x00 }; | |
285 | struct i2c_msg start_tuner[] = { | |
86534e5e | 286 | {.addr = ADDR_B1A6_STREAM_CTRL,.buf = onoff ? buf_start : buf_stop,.len = 2}, |
941491f3 MG |
287 | }; |
288 | if (dvb_usb_opera1_debug) | |
289 | info("streaming %s", onoff ? "on" : "off"); | |
290 | i2c_transfer(&adap->dev->i2c_adap, start_tuner, 1); | |
291 | return 0; | |
292 | } | |
293 | ||
294 | static int opera1_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, | |
295 | int onoff) | |
296 | { | |
297 | u8 b_pid[3]; | |
298 | struct i2c_msg msg[] = { | |
86534e5e | 299 | {.addr = ADDR_B1A6_STREAM_CTRL,.buf = b_pid,.len = 3}, |
941491f3 MG |
300 | }; |
301 | if (dvb_usb_opera1_debug) | |
302 | info("pidfilter index: %d pid: %d %s", index, pid, | |
303 | onoff ? "on" : "off"); | |
304 | b_pid[0] = (2 * index) + 4; | |
305 | b_pid[1] = onoff ? (pid & 0xff) : (0x00); | |
306 | b_pid[2] = onoff ? ((pid >> 8) & 0xff) : (0x00); | |
307 | i2c_transfer(&adap->dev->i2c_adap, msg, 1); | |
308 | return 0; | |
309 | } | |
310 | ||
311 | static int opera1_pid_filter_control(struct dvb_usb_adapter *adap, int onoff) | |
312 | { | |
313 | int u = 0x04; | |
314 | u8 b_pid[3]; | |
315 | struct i2c_msg msg[] = { | |
86534e5e | 316 | {.addr = ADDR_B1A6_STREAM_CTRL,.buf = b_pid,.len = 3}, |
941491f3 MG |
317 | }; |
318 | if (dvb_usb_opera1_debug) | |
319 | info("%s hw-pidfilter", onoff ? "enable" : "disable"); | |
320 | for (; u < 0x7e; u += 2) { | |
321 | b_pid[0] = u; | |
322 | b_pid[1] = 0; | |
323 | b_pid[2] = 0x80; | |
324 | i2c_transfer(&adap->dev->i2c_adap, msg, 1); | |
325 | } | |
326 | return 0; | |
327 | } | |
328 | ||
329 | static struct dvb_usb_rc_key opera1_rc_keys[] = { | |
330 | {0x5f, 0xa0, KEY_1}, | |
331 | {0x51, 0xaf, KEY_2}, | |
332 | {0x5d, 0xa2, KEY_3}, | |
333 | {0x41, 0xbe, KEY_4}, | |
334 | {0x0b, 0xf5, KEY_5}, | |
335 | {0x43, 0xbd, KEY_6}, | |
336 | {0x47, 0xb8, KEY_7}, | |
337 | {0x49, 0xb6, KEY_8}, | |
338 | {0x05, 0xfa, KEY_9}, | |
339 | {0x45, 0xba, KEY_0}, | |
340 | {0x09, 0xf6, KEY_UP}, /*chanup */ | |
341 | {0x1b, 0xe5, KEY_DOWN}, /*chandown */ | |
342 | {0x5d, 0xa3, KEY_LEFT}, /*voldown */ | |
343 | {0x5f, 0xa1, KEY_RIGHT}, /*volup */ | |
344 | {0x07, 0xf8, KEY_SPACE}, /*tab */ | |
345 | {0x1f, 0xe1, KEY_ENTER}, /*play ok */ | |
346 | {0x1b, 0xe4, KEY_Z}, /*zoom */ | |
347 | {0x59, 0xa6, KEY_M}, /*mute */ | |
348 | {0x5b, 0xa5, KEY_F}, /*tv/f */ | |
349 | {0x19, 0xe7, KEY_R}, /*rec */ | |
350 | {0x01, 0xfe, KEY_S}, /*Stop */ | |
351 | {0x03, 0xfd, KEY_P}, /*pause */ | |
352 | {0x03, 0xfc, KEY_W}, /*<- -> */ | |
353 | {0x07, 0xf9, KEY_C}, /*capture */ | |
354 | {0x47, 0xb9, KEY_Q}, /*exit */ | |
355 | {0x43, 0xbc, KEY_O}, /*power */ | |
356 | ||
357 | }; | |
358 | ||
359 | static int opera1_rc_query(struct dvb_usb_device *dev, u32 * event, int *state) | |
360 | { | |
361 | struct opera1_state *opst = dev->priv; | |
362 | u8 rcbuffer[32]; | |
363 | const u16 startmarker1 = 0x10ed; | |
364 | const u16 startmarker2 = 0x11ec; | |
365 | struct i2c_msg read_remote[] = { | |
86534e5e | 366 | {.addr = ADDR_B880_READ_REMOTE,.buf = rcbuffer,.flags = I2C_M_RD,.len = 32}, |
941491f3 MG |
367 | }; |
368 | int i = 0; | |
369 | u32 send_key = 0; | |
370 | ||
371 | if (i2c_transfer(&dev->i2c_adap, read_remote, 1) == 1) { | |
372 | for (i = 0; i < 32; i++) { | |
373 | if (rcbuffer[i]) | |
374 | send_key |= 1; | |
375 | if (i < 31) | |
376 | send_key = send_key << 1; | |
377 | } | |
378 | if (send_key & 0x8000) | |
379 | send_key = (send_key << 1) | (send_key >> 15 & 0x01); | |
380 | ||
381 | if (send_key == 0xffff && opst->last_key_pressed != 0) { | |
382 | *state = REMOTE_KEY_REPEAT; | |
383 | *event = opst->last_key_pressed; | |
384 | return 0; | |
385 | } | |
386 | for (; send_key != 0;) { | |
387 | if (send_key >> 16 == startmarker2) { | |
388 | break; | |
389 | } else if (send_key >> 16 == startmarker1) { | |
390 | send_key = | |
391 | (send_key & 0xfffeffff) | (startmarker1 << 16); | |
392 | break; | |
393 | } else | |
394 | send_key >>= 1; | |
395 | } | |
396 | ||
397 | if (send_key == 0) | |
398 | return 0; | |
399 | ||
400 | send_key = (send_key & 0xffff) | 0x0100; | |
401 | ||
402 | for (i = 0; i < ARRAY_SIZE(opera1_rc_keys); i++) { | |
403 | if ((opera1_rc_keys[i].custom * 256 + | |
404 | opera1_rc_keys[i].data) == (send_key & 0xffff)) { | |
405 | *state = REMOTE_KEY_PRESSED; | |
406 | *event = opera1_rc_keys[i].event; | |
407 | opst->last_key_pressed = | |
408 | opera1_rc_keys[i].event; | |
409 | break; | |
410 | } | |
411 | opst->last_key_pressed = 0; | |
412 | } | |
413 | } else | |
414 | *state = REMOTE_NO_KEY_PRESSED; | |
415 | return 0; | |
416 | } | |
417 | ||
418 | static struct usb_device_id opera1_table[] = { | |
419 | {USB_DEVICE(USB_VID_CYPRESS, USB_PID_OPERA1_COLD)}, | |
420 | {USB_DEVICE(USB_VID_OPERA1, USB_PID_OPERA1_WARM)}, | |
421 | {} | |
422 | }; | |
423 | ||
424 | MODULE_DEVICE_TABLE(usb, opera1_table); | |
425 | ||
426 | static int opera1_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) | |
427 | { | |
428 | u8 command[] = { READ_MAC_ADDR }; | |
429 | opera1_xilinx_rw(d->udev, 0xb1, 0xa0, command, 1, OPERA_WRITE_MSG); | |
430 | opera1_xilinx_rw(d->udev, 0xb1, 0xa1, mac, 6, OPERA_READ_MSG); | |
431 | return 0; | |
432 | } | |
433 | static int opera1_xilinx_load_firmware(struct usb_device *dev, | |
434 | const char *filename) | |
435 | { | |
436 | const struct firmware *fw = NULL; | |
437 | u8 *b, *p; | |
59800555 | 438 | int ret = 0, i,fpgasize=40; |
941491f3 | 439 | u8 testval; |
59800555 | 440 | info("start downloading fpga firmware %s",filename); |
941491f3 MG |
441 | |
442 | if ((ret = request_firmware(&fw, filename, &dev->dev)) != 0) { | |
443 | err("did not find the firmware file. (%s) " | |
444 | "Please see linux/Documentation/dvb/ for more details on firmware-problems.", | |
445 | filename); | |
446 | return ret; | |
447 | } else { | |
448 | p = kmalloc(fw->size, GFP_KERNEL); | |
449 | opera1_xilinx_rw(dev, 0xbc, 0x00, &testval, 1, OPERA_READ_MSG); | |
450 | if (p != NULL && testval != 0x67) { | |
451 | ||
452 | u8 reset = 0, fpga_command = 0; | |
453 | memcpy(p, fw->data, fw->size); | |
454 | /* clear fpga ? */ | |
455 | opera1_xilinx_rw(dev, 0xbc, 0xaa, &fpga_command, 1, | |
456 | OPERA_WRITE_MSG); | |
59800555 MG |
457 | for (i = 0; i < fw->size;) { |
458 | if ( (fw->size - i) <fpgasize){ | |
459 | fpgasize=fw->size-i; | |
460 | } | |
941491f3 MG |
461 | b = (u8 *) p + i; |
462 | if (opera1_xilinx_rw | |
59800555 MG |
463 | (dev, OPERA_WRITE_FX2, 0x0, b , fpgasize, |
464 | OPERA_WRITE_MSG) != fpgasize | |
941491f3 MG |
465 | ) { |
466 | err("error while transferring firmware"); | |
467 | ret = -EINVAL; | |
468 | break; | |
469 | } | |
59800555 | 470 | i = i + fpgasize; |
941491f3 MG |
471 | } |
472 | /* restart the CPU */ | |
473 | if (ret || opera1_xilinx_rw | |
474 | (dev, 0xa0, 0xe600, &reset, 1, | |
475 | OPERA_WRITE_MSG) != 1) { | |
476 | err("could not restart the USB controller CPU."); | |
477 | ret = -EINVAL; | |
478 | } | |
479 | kfree(p); | |
480 | } | |
481 | } | |
482 | if (fw) { | |
483 | release_firmware(fw); | |
484 | } | |
485 | return ret; | |
486 | } | |
487 | ||
488 | static struct dvb_usb_device_properties opera1_properties = { | |
489 | .caps = DVB_USB_IS_AN_I2C_ADAPTER, | |
490 | .usb_ctrl = CYPRESS_FX2, | |
86534e5e | 491 | .firmware = "dvb-usb-opera-01.fw", |
941491f3 MG |
492 | .size_of_priv = sizeof(struct opera1_state), |
493 | ||
494 | .power_ctrl = opera1_power_ctrl, | |
495 | .i2c_algo = &opera1_i2c_algo, | |
496 | ||
497 | .rc_key_map = opera1_rc_keys, | |
498 | .rc_key_map_size = ARRAY_SIZE(opera1_rc_keys), | |
499 | .rc_interval = 200, | |
500 | .rc_query = opera1_rc_query, | |
501 | .read_mac_address = opera1_read_mac_address, | |
502 | .generic_bulk_ctrl_endpoint = 0x00, | |
503 | /* parameter for the MPEG2-data transfer */ | |
504 | .num_adapters = 1, | |
505 | .adapter = { | |
506 | { | |
507 | .frontend_attach = opera1_frontend_attach, | |
508 | .streaming_ctrl = opera1_streaming_ctrl, | |
509 | .tuner_attach = opera1_tuner_attach, | |
510 | .caps = | |
511 | DVB_USB_ADAP_HAS_PID_FILTER | | |
512 | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, | |
513 | .pid_filter = opera1_pid_filter, | |
514 | .pid_filter_ctrl = opera1_pid_filter_control, | |
515 | .pid_filter_count = 252, | |
516 | .stream = { | |
517 | .type = USB_BULK, | |
518 | .count = 10, | |
519 | .endpoint = 0x82, | |
520 | .u = { | |
521 | .bulk = { | |
522 | .buffersize = 4096, | |
523 | } | |
524 | } | |
525 | }, | |
526 | } | |
527 | }, | |
528 | .num_device_descs = 1, | |
529 | .devices = { | |
530 | {"Opera1 DVB-S USB2.0", | |
531 | {&opera1_table[0], NULL}, | |
532 | {&opera1_table[1], NULL}, | |
533 | }, | |
534 | } | |
535 | }; | |
536 | ||
537 | static int opera1_probe(struct usb_interface *intf, | |
538 | const struct usb_device_id *id) | |
539 | { | |
941491f3 MG |
540 | struct usb_device *udev = interface_to_usbdev(intf); |
541 | ||
542 | if (udev->descriptor.idProduct == USB_PID_OPERA1_WARM && | |
543 | udev->descriptor.idVendor == USB_VID_OPERA1 && | |
59800555 | 544 | opera1_xilinx_load_firmware(udev, "dvb-usb-opera1-fpga-01.fw") != 0 |
d06cdbe5 | 545 | ) { |
941491f3 MG |
546 | return -EINVAL; |
547 | } | |
548 | ||
d06cdbe5 | 549 | if (dvb_usb_device_init(intf, &opera1_properties, THIS_MODULE, NULL) != 0) |
941491f3 MG |
550 | return -EINVAL; |
551 | return 0; | |
552 | } | |
553 | ||
554 | static struct usb_driver opera1_driver = { | |
555 | .name = "opera1", | |
556 | .probe = opera1_probe, | |
557 | .disconnect = dvb_usb_device_exit, | |
558 | .id_table = opera1_table, | |
559 | }; | |
560 | ||
561 | static int __init opera1_module_init(void) | |
562 | { | |
563 | int result = 0; | |
564 | if ((result = usb_register(&opera1_driver))) { | |
565 | err("usb_register failed. Error number %d", result); | |
566 | } | |
567 | return result; | |
568 | } | |
569 | ||
570 | static void __exit opera1_module_exit(void) | |
571 | { | |
572 | usb_deregister(&opera1_driver); | |
573 | } | |
574 | ||
575 | module_init(opera1_module_init); | |
576 | module_exit(opera1_module_exit); | |
577 | ||
578 | MODULE_AUTHOR("Mario Hlawitschka (c) dh1pa@amsat.org"); | |
579 | MODULE_AUTHOR("Marco Gittler (c) g.marco@freenet.de"); | |
580 | MODULE_DESCRIPTION("Driver for Opera1 DVB-S device"); | |
581 | MODULE_VERSION("0.1"); | |
582 | MODULE_LICENSE("GPL"); |