]>
Commit | Line | Data |
---|---|---|
c942fddf | 1 | /* SPDX-License-Identifier: GPL-2.0-or-later */ |
395d00d1 | 2 | /* |
7978b8a1 | 3 | * Montage Technology M88DS3103/M88RS6000 demodulator driver |
395d00d1 AP |
4 | * |
5 | * Copyright (C) 2013 Antti Palosaari <crope@iki.fi> | |
395d00d1 AP |
6 | */ |
7 | ||
8 | #ifndef M88DS3103_H | |
9 | #define M88DS3103_H | |
10 | ||
11 | #include <linux/dvb/frontend.h> | |
12 | ||
f01919e8 AP |
13 | /* |
14 | * I2C address | |
15 | * 0x68, | |
16 | */ | |
17 | ||
be9b53c8 MCC |
18 | /** |
19 | * enum m88ds3103_ts_mode - TS connection mode | |
20 | * @M88DS3103_TS_SERIAL: TS output pin D0, normal | |
21 | * @M88DS3103_TS_SERIAL_D7: TS output pin D7 | |
22 | * @M88DS3103_TS_PARALLEL: TS Parallel mode | |
23 | * @M88DS3103_TS_CI: TS CI Mode | |
24 | */ | |
25 | enum m88ds3103_ts_mode { | |
26 | M88DS3103_TS_SERIAL, | |
27 | M88DS3103_TS_SERIAL_D7, | |
28 | M88DS3103_TS_PARALLEL, | |
29 | M88DS3103_TS_CI | |
30 | }; | |
31 | ||
32 | /** | |
33 | * enum m88ds3103_clock_out | |
34 | * @M88DS3103_CLOCK_OUT_DISABLED: Clock output is disabled | |
35 | * @M88DS3103_CLOCK_OUT_ENABLED: Clock output is enabled with crystal | |
36 | * clock. | |
37 | * @M88DS3103_CLOCK_OUT_ENABLED_DIV2: Clock output is enabled with half | |
38 | * crystal clock. | |
39 | */ | |
40 | enum m88ds3103_clock_out { | |
41 | M88DS3103_CLOCK_OUT_DISABLED, | |
42 | M88DS3103_CLOCK_OUT_ENABLED, | |
43 | M88DS3103_CLOCK_OUT_ENABLED_DIV2 | |
44 | }; | |
45 | ||
f01919e8 AP |
46 | /** |
47 | * struct m88ds3103_platform_data - Platform data for the m88ds3103 driver | |
48 | * @clk: Clock frequency. | |
49 | * @i2c_wr_max: Max bytes I2C adapter can write at once. | |
50 | * @ts_mode: TS mode. | |
51 | * @ts_clk: TS clock (KHz). | |
52 | * @ts_clk_pol: TS clk polarity. 1-active at falling edge; 0-active at rising | |
53 | * edge. | |
54 | * @spec_inv: Input spectrum inversion. | |
55 | * @agc: AGC configuration. | |
56 | * @agc_inv: AGC polarity. | |
57 | * @clk_out: Clock output. | |
58 | * @envelope_mode: DiSEqC envelope mode. | |
59 | * @lnb_hv_pol: LNB H/V pin polarity. 0: pin high set to VOLTAGE_18, pin low to | |
60 | * set VOLTAGE_13. 1: pin high set to VOLTAGE_13, pin low to set VOLTAGE_18. | |
61 | * @lnb_en_pol: LNB enable pin polarity. 0: pin high to disable, pin low to | |
62 | * enable. 1: pin high to enable, pin low to disable. | |
63 | * @get_dvb_frontend: Get DVB frontend. | |
64 | * @get_i2c_adapter: Get I2C adapter. | |
65 | */ | |
f01919e8 AP |
66 | struct m88ds3103_platform_data { |
67 | u32 clk; | |
68 | u16 i2c_wr_max; | |
be9b53c8 | 69 | enum m88ds3103_ts_mode ts_mode; |
f01919e8 | 70 | u32 ts_clk; |
be9b53c8 | 71 | enum m88ds3103_clock_out clk_out; |
f01919e8 AP |
72 | u8 ts_clk_pol:1; |
73 | u8 spec_inv:1; | |
74 | u8 agc; | |
75 | u8 agc_inv:1; | |
f01919e8 AP |
76 | u8 envelope_mode:1; |
77 | u8 lnb_hv_pol:1; | |
78 | u8 lnb_en_pol:1; | |
79 | ||
80 | struct dvb_frontend* (*get_dvb_frontend)(struct i2c_client *); | |
81 | struct i2c_adapter* (*get_i2c_adapter)(struct i2c_client *); | |
82 | ||
83 | /* private: For legacy media attach wrapper. Do not set value. */ | |
84 | u8 attach_in_use:1; | |
85 | }; | |
86 | ||
be9b53c8 MCC |
87 | /** |
88 | * struct m88ds3103_config - m88ds3102 configuration | |
89 | * | |
90 | * @i2c_addr: I2C address. Default: none, must set. Example: 0x68, ... | |
91 | * @clock: Device's clock. Default: none, must set. Example: 27000000 | |
92 | * @i2c_wr_max: Max bytes I2C provider is asked to write at once. | |
93 | * Default: none, must set. Example: 33, 65, ... | |
94 | * @ts_mode: TS output mode, as defined by &enum m88ds3103_ts_mode. | |
95 | * Default: M88DS3103_TS_SERIAL. | |
96 | * @ts_clk: TS clk in KHz. Default: 0. | |
97 | * @ts_clk_pol: TS clk polarity.Default: 0. | |
98 | * 1-active at falling edge; 0-active at rising edge. | |
99 | * @spec_inv: Spectrum inversion. Default: 0. | |
100 | * @agc_inv: AGC polarity. Default: 0. | |
101 | * @clock_out: Clock output, as defined by &enum m88ds3103_clock_out. | |
102 | * Default: M88DS3103_CLOCK_OUT_DISABLED. | |
103 | * @envelope_mode: DiSEqC envelope mode. Default: 0. | |
104 | * @agc: AGC configuration. Default: none, must set. | |
105 | * @lnb_hv_pol: LNB H/V pin polarity. Default: 0. Values: | |
106 | * 1: pin high set to VOLTAGE_13, pin low to set VOLTAGE_18; | |
107 | * 0: pin high set to VOLTAGE_18, pin low to set VOLTAGE_13. | |
108 | * @lnb_en_pol: LNB enable pin polarity. Default: 0. Values: | |
109 | * 1: pin high to enable, pin low to disable; | |
110 | * 0: pin high to disable, pin low to enable. | |
f01919e8 | 111 | */ |
395d00d1 | 112 | struct m88ds3103_config { |
395d00d1 | 113 | u8 i2c_addr; |
395d00d1 | 114 | u32 clock; |
395d00d1 | 115 | u16 i2c_wr_max; |
395d00d1 | 116 | u8 ts_mode; |
79d09330 | 117 | u32 ts_clk; |
79d09330 | 118 | u8 ts_clk_pol:1; |
395d00d1 | 119 | u8 spec_inv:1; |
395d00d1 | 120 | u8 agc_inv:1; |
395d00d1 | 121 | u8 clock_out; |
395d00d1 | 122 | u8 envelope_mode:1; |
395d00d1 | 123 | u8 agc; |
79d09330 | 124 | u8 lnb_hv_pol:1; |
79d09330 | 125 | u8 lnb_en_pol:1; |
395d00d1 AP |
126 | }; |
127 | ||
395d00d1 AP |
128 | #if defined(CONFIG_DVB_M88DS3103) || \ |
129 | (defined(CONFIG_DVB_M88DS3103_MODULE) && defined(MODULE)) | |
be9b53c8 MCC |
130 | /** |
131 | * Attach a m88ds3103 demod | |
132 | * | |
133 | * @config: pointer to &struct m88ds3103_config with demod configuration. | |
134 | * @i2c: i2c adapter to use. | |
135 | * @tuner_i2c: on success, returns the I2C adapter associated with | |
136 | * m88ds3103 tuner. | |
137 | * | |
138 | * return: FE pointer on success, NULL on failure. | |
139 | * Note: Do not add new m88ds3103_attach() users! Use I2C bindings instead. | |
140 | */ | |
395d00d1 AP |
141 | extern struct dvb_frontend *m88ds3103_attach( |
142 | const struct m88ds3103_config *config, | |
143 | struct i2c_adapter *i2c, | |
144 | struct i2c_adapter **tuner_i2c); | |
0f91c9d6 | 145 | extern int m88ds3103_get_agc_pwm(struct dvb_frontend *fe, u8 *_agc_pwm); |
395d00d1 AP |
146 | #else |
147 | static inline struct dvb_frontend *m88ds3103_attach( | |
148 | const struct m88ds3103_config *config, | |
149 | struct i2c_adapter *i2c, | |
150 | struct i2c_adapter **tuner_i2c) | |
151 | { | |
152 | pr_warn("%s: driver disabled by Kconfig\n", __func__); | |
153 | return NULL; | |
154 | } | |
0f91c9d6 | 155 | #define m88ds3103_get_agc_pwm NULL |
395d00d1 AP |
156 | #endif |
157 | ||
158 | #endif |